diff options
| -rw-r--r-- | tmk_core/common.mk | 6 | ||||
| -rw-r--r-- | tmk_core/protocol/lufa.mk | 4 | ||||
| -rw-r--r-- | tmk_core/protocol/lufa/adafruit_ble.cpp | 805 | ||||
| -rw-r--r-- | tmk_core/protocol/lufa/adafruit_ble.h | 60 | ||||
| -rw-r--r-- | tmk_core/protocol/lufa/ringbuffer.hpp | 66 |
5 files changed, 940 insertions, 1 deletions
diff --git a/tmk_core/common.mk b/tmk_core/common.mk index f826a7b54..c32a12bb6 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -81,6 +81,10 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes) TMK_COMMON_DEFS += -DBACKLIGHT_ENABLE endif +ifeq ($(strip $(ADAFRUIT_BLE_ENABLE)), yes) + TMK_COMMON_DEFS += -DADAFRUIT_BLE_ENABLE +endif + ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE endif @@ -110,4 +114,4 @@ endif VPATH += $(TMK_PATH)/$(COMMON_DIR) ifeq ($(PLATFORM),CHIBIOS) VPATH += $(TMK_PATH)/$(COMMON_DIR)/chibios -endif
\ No newline at end of file +endif diff --git a/tmk_core/protocol/lufa.mk b/tmk_core/protocol/lufa.mk index 5b1e3d19d..151d26cbc 100644 --- a/tmk_core/protocol/lufa.mk +++ b/tmk_core/protocol/lufa.mk @@ -21,6 +21,10 @@ ifeq ($(strip $(MIDI_ENABLE)), yes) include $(TMK_PATH)/protocol/midi.mk endif +ifeq ($(strip $(ADAFRUIT_BLE_ENABLE)), yes) + LUFA_SRC += $(LUFA_DIR)/adafruit_ble.cpp +endif + ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) LUFA_SRC += $(LUFA_DIR)/bluetooth.c \ $(TMK_DIR)/protocol/serial_uart.c diff --git a/tmk_core/protocol/lufa/adafruit_ble.cpp b/tmk_core/protocol/lufa/adafruit_ble.cpp new file mode 100644 index 000000000..37194e77a --- /dev/null +++ b/tmk_core/protocol/lufa/adafruit_ble.cpp @@ -0,0 +1,805 @@ +#include "adafruit_ble.h" +#include <stdio.h> +#include <stdlib.h> +#include <alloca.h> +#include <util/delay.h> +#include <util/atomic.h> +#include "debug.h" +#include "pincontrol.h" +#include "timer.h" +#include "action_util.h" +#include "ringbuffer.hpp" +#include <string.h> + +// These are the pin assignments for the 32u4 boards. +// You may define them to something else in your config.h +// if yours is wired up differently. +#ifndef AdafruitBleResetPin +#define AdafruitBleResetPin D4 +#endif + +#ifndef AdafruitBleCSPin +#define AdafruitBleCSPin B4 +#endif + +#ifndef AdafruitBleIRQPin +#define AdafruitBleIRQPin E6 +#endif + + +#define SAMPLE_BATTERY +#define ConnectionUpdateInterval 1000 /* milliseconds */ + +static struct { + bool is_connected; + bool initialized; + bool configured; + +#define ProbedEvents 1 +#define UsingEvents 2 + bool event_flags; + +#ifdef SAMPLE_BATTERY + uint16_t last_battery_update; + uint32_t vbat; +#endif + uint16_t last_connection_update; +} state; + +// Commands are encoded using SDEP and sent via SPI +// https://github.com/adafruit/Adafruit_BluefruitLE_nRF51/blob/master/SDEP.md + +#define SdepMaxPayload 16 +struct sdep_msg { + uint8_t type; + uint8_t cmd_low; + uint8_t cmd_high; + struct __attribute__((packed)) { + uint8_t len:7; + uint8_t more:1; + }; + uint8_t payload[SdepMaxPayload]; +} __attribute__((packed)); + +// The recv latency is relatively high, so when we're hammering keys quickly, +// we want to avoid waiting for the responses in the matrix loop. We maintain +// a short queue for that. Since there is quite a lot of space overhead for +// the AT command representation wrapped up in SDEP, we queue the minimal +// information here. + +enum queue_type { + QTKeyReport, // 1-byte modifier + 6-byte key report + QTConsumer, // 16-bit key code +#ifdef MOUSE_ENABLE + QTMouseMove, // 4-byte mouse report +#endif +}; + +struct queue_item { + enum queue_type queue_type; + uint16_t added; + union __attribute__((packed)) { + struct __attribute__((packed)) { + uint8_t modifier; + uint8_t keys[6]; + } key; + + uint16_t consumer; + struct __attribute__((packed)) { + uint8_t x, y, scroll, pan; + } mousemove; + }; +}; + +// Items that we wish to send +static RingBuffer<queue_item, 40> send_buf; +// Pending response; while pending, we can't send any more requests. +// This records the time at which we sent the command for which we +// are expecting a response. +static RingBuffer<uint16_t, 2> resp_buf; + +static bool process_queue_item(struct queue_item *item, uint16_t timeout); + +enum sdep_type { + SdepCommand = 0x10, + SdepResponse = 0x20, + SdepAlert = 0x40, + SdepError = 0x80, + SdepSlaveNotReady = 0xfe, // Try again later + SdepSlaveOverflow = 0xff, // You read more data than is available +}; + +enum ble_cmd { + BleInitialize = 0xbeef, + BleAtWrapper = 0x0a00, + BleUartTx = 0x0a01, + BleUartRx = 0x0a02, +}; + +enum ble_system_event_bits { + BleSystemConnected = 0, + BleSystemDisconnected = 1, + BleSystemUartRx = 8, + BleSystemMidiRx = 10, +}; + +// The SDEP.md file says 2MHz but the web page and the sample driver +// both use 4MHz +#define SpiBusSpeed 4000000 + +#define SdepTimeout 150 /* milliseconds */ +#define SdepShortTimeout 10 /* milliseconds */ +#define SdepBackOff 25 /* microseconds */ +#define BatteryUpdateInterval 10000 /* milliseconds */ + +static bool at_command(const char *cmd, char *resp, uint16_t resplen, + bool verbose, uint16_t timeout = SdepTimeout); +static bool at_command_P(const char *cmd, char *resp, uint16_t resplen, + bool verbose = false); + +struct SPI_Settings { + uint8_t spcr, spsr; +}; + +static struct SPI_Settings spi; + +// Initialize 4Mhz MSBFIRST MODE0 +void SPI_init(struct SPI_Settings *spi) { + spi->spcr = _BV(SPE) | _BV(MSTR); + spi->spsr = _BV(SPI2X); + + static_assert(SpiBusSpeed == F_CPU / 2, "hard coded at 4Mhz"); + + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { + // Ensure that SS is OUTPUT High + digitalWrite(B0, PinLevelHigh); + pinMode(B0, PinDirectionOutput); + + SPCR |= _BV(MSTR); + SPCR |= _BV(SPE); + pinMode(B1 /* SCK */, PinDirectionOutput); + pinMode(B2 /* MOSI */, PinDirectionOutput); + } +} + +static inline void SPI_begin(struct SPI_Settings*spi) { + SPCR = spi->spcr; + SPSR = spi->spsr; +} + +static inline uint8_t SPI_TransferByte(uint8_t data) { + SPDR = data; + asm volatile("nop"); + while (!(SPSR & _BV(SPIF))) { + ; // wait + } + return SPDR; +} + +static inline void spi_send_bytes(const uint8_t *buf, uint8_t len) { + if (len == 0) return; + const uint8_t *end = buf + len; + while (buf < end) { + SPDR = *buf; + while (!(SPSR & _BV(SPIF))) { + ; // wait + } + ++buf; + } +} + +static inline uint16_t spi_read_byte(void) { + return SPI_TransferByte(0x00 /* dummy */); +} + +static inline void spi_recv_bytes(uint8_t *buf, uint8_t len) { + const uint8_t *end = buf + len; + if (len == 0) return; + while (buf < end) { + SPDR = 0; // write a dummy to initiate read + while (!(SPSR & _BV(SPIF))) { + ; // wait + } + *buf = SPDR; + ++buf; + } +} + +#if 0 +static void dump_pkt(const struct sdep_msg *msg) { + print("pkt: type="); + print_hex8(msg->type); + print(" cmd="); + print_hex8(msg->cmd_high); + print_hex8(msg->cmd_low); + print(" len="); + print_hex8(msg->len); + print(" more="); + print_hex8(msg->more); + print("\n"); +} +#endif + +// Send a single SDEP packet +static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) { + SPI_begin(&spi); + + digitalWrite(AdafruitBleCSPin, PinLevelLow); + uint16_t timerStart = timer_read(); + bool success = false; + bool ready = false; + + do { + ready = SPI_TransferByte(msg->type) != SdepSlaveNotReady; + if (ready) { + break; + } + + // Release it and let it initialize + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + _delay_us(SdepBackOff); + digitalWrite(AdafruitBleCSPin, PinLevelLow); + } while (timer_elapsed(timerStart) < timeout); + + if (ready) { + // Slave is ready; send the rest of the packet + spi_send_bytes(&msg->cmd_low, + sizeof(*msg) - (1 + sizeof(msg->payload)) + msg->len); + success = true; + } + + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + + return success; +} + +static inline void sdep_build_pkt(struct sdep_msg *msg, uint16_t command, + const uint8_t *payload, uint8_t len, + bool moredata) { + msg->type = SdepCommand; + msg->cmd_low = command & 0xff; + msg->cmd_high = command >> 8; + msg->len = len; + msg->more = (moredata && len == SdepMaxPayload) ? 1 : 0; + + static_assert(sizeof(*msg) == 20, "msg is correctly packed"); + + memcpy(msg->payload, payload, len); +} + +// Read a single SDEP packet +static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) { + bool success = false; + uint16_t timerStart = timer_read(); + bool ready = false; + + do { + ready = digitalRead(AdafruitBleIRQPin); + if (ready) { + break; + } + _delay_us(1); + } while (timer_elapsed(timerStart) < timeout); + + if (ready) { + SPI_begin(&spi); + + digitalWrite(AdafruitBleCSPin, PinLevelLow); + + do { + // Read the command type, waiting for the data to be ready + msg->type = spi_read_byte(); + if (msg->type == SdepSlaveNotReady || msg->type == SdepSlaveOverflow) { + // Release it and let it initialize + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + _delay_us(SdepBackOff); + digitalWrite(AdafruitBleCSPin, PinLevelLow); + continue; + } + + // Read the rest of the header + spi_recv_bytes(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload))); + + // and get the payload if there is any + if (msg->len <= SdepMaxPayload) { + spi_recv_bytes(msg->payload, msg->len); + } + success = true; + break; + } while (timer_elapsed(timerStart) < timeout); + + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + } + return success; +} + +static void resp_buf_read_one(bool greedy) { + uint16_t last_send; + if (!resp_buf.peek(last_send)) { + return; + } + + if (digitalRead(AdafruitBleIRQPin)) { + struct sdep_msg msg; + +again: + if (sdep_recv_pkt(&msg, SdepTimeout)) { + if (!msg.more) { + // We got it; consume this entry + resp_buf.get(last_send); + dprintf("recv latency %dms\n", TIMER_DIFF_16(timer_read(), last_send)); + } + + if (greedy && resp_buf.peek(last_send) && digitalRead(AdafruitBleIRQPin)) { + goto again; + } + } + + } else if (timer_elapsed(last_send) > SdepTimeout * 2) { + dprintf("waiting_for_result: timeout, resp_buf size %d\n", + (int)resp_buf.size()); + + // Timed out: consume this entry + resp_buf.get(last_send); + } +} + +static void send_buf_send_one(uint16_t timeout = SdepTimeout) { + struct queue_item item; + + // Don't send anything more until we get an ACK + if (!resp_buf.empty()) { + return; + } + + if (!send_buf.peek(item)) { + return; + } + if (process_queue_item(&item, timeout)) { + // commit that peek + send_buf.get(item); + dprintf("send_buf_send_one: have %d remaining\n", (int)send_buf.size()); + } else { + dprint("failed to send, will retry\n"); + _delay_ms(SdepTimeout); + resp_buf_read_one(true); + } +} + +static void resp_buf_wait(const char *cmd) { + bool didPrint = false; + while (!resp_buf.empty()) { + if (!didPrint) { + dprintf("wait on buf for %s\n", cmd); + didPrint = true; + } + resp_buf_read_one(true); + } +} + +static bool ble_init(void) { + state.initialized = false; + state.configured = false; + state.is_connected = false; + + pinMode(AdafruitBleIRQPin, PinDirectionInput); + pinMode(AdafruitBleCSPin, PinDirectionOutput); + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + + SPI_init(&spi); + + // Perform a hardware reset + pinMode(AdafruitBleResetPin, PinDirectionOutput); + digitalWrite(AdafruitBleResetPin, PinLevelHigh); + digitalWrite(AdafruitBleResetPin, PinLevelLow); + _delay_ms(10); + digitalWrite(AdafruitBleResetPin, PinLevelHigh); + + _delay_ms(1000); // Give it a second to initialize + + state.initialized = true; + return state.initialized; +} + +static inline uint8_t min(uint8_t a, uint8_t b) { + return a < b ? a : b; +} + +static bool read_response(char *resp, uint16_t resplen, bool verbose) { + char *dest = resp; + char *end = dest + resplen; + + while (true) { + struct sdep_msg msg; + + if (!sdep_recv_pkt(&msg, 2 * SdepTimeout)) { + dprint("sdep_recv_pkt failed\n"); + return false; + } + + if (msg.type != SdepResponse) { + *resp = 0; + return false; + } + + uint8_t len = min(msg.len, end - dest); + if (len > 0) { + memcpy(dest, msg.payload, len); + dest += len; + } + + if (!msg.more) { + // No more data is expected! + break; + } + } + + // Ensure the response is NUL terminated + *dest = 0; + + // "Parse" the result text; we want to snip off the trailing OK or ERROR line + // Rewind past the possible trailing CRLF so that we can strip it + --dest; + while (dest > resp && (dest[0] == '\n' || dest[0] == '\r')) { + *dest = 0; + --dest; + } + + // Look back for start of preceeding line + char *last_line = strrchr(resp, '\n'); + if (last_line) { + ++last_line; + } else { + last_line = resp; + } + + bool success = false; + static const char kOK[] PROGMEM = "OK"; + + success = !strcmp_P(last_line, kOK ); + + if (verbose || !success) { + dprintf("result: %s\n", resp); + } + return success; +} + +static bool at_command(const char *cmd, char *resp, uint16_t resplen, + bool verbose, uint16_t timeout) { + const char *end = cmd + strlen(cmd); + struct sdep_msg msg; + + if (verbose) { + dprintf("ble send: %s\n", cmd); + } + + if (resp) { + // They want to decode the response, so we need to flush and wait + // for all pending I/O to finish before we start this one, so + // that we don't confuse the results + resp_buf_wait(cmd); + *resp = 0; + } + + // Fragment the command into a series of SDEP packets + while (end - cmd > SdepMaxPayload) { + sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, SdepMaxPayload, true); + if (!sdep_send_pkt(&msg, timeout)) { + return false; + } + cmd += SdepMaxPayload; + } + + sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, end - cmd, false); + if (!sdep_send_pkt(&msg, timeout)) { + return false; + } + + if (resp == NULL) { + auto now = timer_read(); + while (!resp_buf.enqueue(now)) { + resp_buf_read_one(false); + } + auto later = timer_read(); + if (TIMER_DIFF_16(later, now) > 0) { + dprintf("waited %dms for resp_buf\n", TIMER_DIFF_16(later, now)); + } + return true; + } + + return read_response(resp, resplen, verbose); +} + +bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) { + auto cmdbuf = (char *)alloca(strlen_P(cmd) + 1); + strcpy_P(cmdbuf, cmd); + return at_command(cmdbuf, resp, resplen, verbose); +} + +bool adafruit_ble_is_connected(void) { + return state.is_connected; +} + +bool adafruit_ble_enable_keyboard(void) { + char resbuf[128]; + + if (!state.initialized && !ble_init()) { + return false; + } + + state.configured = false; + + // Disable command echo + static const char kEcho[] PROGMEM = "ATE=0"; + // Make the advertised name match the keyboard + static const char kGapDevName[] PROGMEM = + "AT+GAPDEVNAME=" STR(PRODUCT) " " STR(DESCRIPTION); + // Turn on keyboard support + static const char kHidEnOn[] PROGMEM = "AT+BLEHIDEN=1"; + + // Adjust intervals to improve latency. This causes the "central" + // system (computer/tablet) to poll us every 10-30 ms. We can't + // set a smaller value than 10ms, and 30ms seems to be the natural + // processing time on my macbook. Keeping it constrained to that + // feels reasonable to type to. + static const char kGapIntervals[] PROGMEM = "AT+GAPINTERVALS=10,30,,"; + + // Reset the device so that it picks up the above changes + static const char kATZ[] PROGMEM = "ATZ"; + + // Turn down the power level a bit + static const char kPower[] PROGMEM = "AT+BLEPOWERLEVEL=-12"; + static PGM_P const configure_commands[] PROGMEM = { + kEcho, + kGapIntervals, + kGapDevName, + kHidEnOn, + kPower, + kATZ, + }; + + uint8_t i; + for (i = 0; i < sizeof(configure_commands) / sizeof(configure_commands[0]); + ++i) { + PGM_P cmd; + memcpy_P(&cmd, configure_commands + i, sizeof(cmd)); + + if (!at_command_P(cmd, resbuf, sizeof(resbuf))) { + dprintf("failed BLE command: %S: %s\n", cmd, resbuf); + goto fail; + } + } + + state.configured = true; + + // Check connection status in a little while; allow the ATZ time + // to kick in. + state.last_connection_update = timer_read(); +fail: + return state.configured; +} + +static void set_connected(bool connected) { + if (connected != state.is_connected) { + if (connected) { + print("****** BLE CONNECT!!!!\n"); + } else { + print("****** BLE DISCONNECT!!!!\n"); + } + state.is_connected = connected; + + // TODO: if modifiers are down on the USB interface and + // we cut over to BLE or vice versa, they will remain stuck. + // This feels like a good point to do something like clearing + // the keyboard and/or generating a fake all keys up message. + // However, I've noticed that it takes a couple of seconds + // for macOS to to start recognizing key presses after BLE + // is in the connected state, so I worry that doing that + // here may not be good enough. + } +} + +void adafruit_ble_task(void) { + char resbuf[48]; + + if (!state.configured && !adafruit_ble_enable_keyboard()) { + return; + } + resp_buf_read_one(true); + send_buf_send_one(SdepShortTimeout); + + if (resp_buf.empty() && (state.event_flags & UsingEvents) && + digitalRead(AdafruitBleIRQPin)) { + // Must be an event update + if (at_command_P(PSTR("AT+EVENTSTATUS"), resbuf, sizeof(resbuf))) { + uint32_t mask = strtoul(resbuf, NULL, 16); + + if (mask & BleSystemConnected) { + set_connected(true); + } else if (mask & BleSystemDisconnected) { + set_connected(false); + } + } + } + + if (timer_elapsed(state.last_connection_update) > ConnectionUpdateInterval) { + bool shouldPoll = true; + if (!(state.event_flags & ProbedEvents)) { + // Request notifications about connection status changes. + // This only works in SPIFRIEND firmware > 0.6.7, which is why + // we check for this conditionally here. + // Note that at the time of writing, HID reports only work correctly + // with Apple products on firmware version 0.6.7! + // https://forums.adafruit.com/viewtopic.php?f=8&t=104052 + if (at_command_P(PSTR("AT+EVENTENABLE=0x1"), resbuf, sizeof(resbuf))) { + at_command_P(PSTR("AT+EVENTENABLE=0x2"), resbuf, sizeof(resbuf)); + state.event_flags |= UsingEvents; + } + state.event_flags |= ProbedEvents; + + // leave shouldPoll == true so that we check at least once + // before relying solely on events + } else { + shouldPoll = false; + } + + static const char kGetConn[] PROGMEM = "AT+GAPGETCONN"; + state.last_connection_update = timer_read(); + + if (at_command_P(kGetConn, resbuf, sizeof(resbuf))) { + set_connected(atoi(resbuf)); + } + } + +#ifdef SAMPLE_BATTERY + // I don't know if this really does anything useful yet; the reported + // voltage level always seems to be around 3200mV. We may want to just rip + // this code out. + if (timer_elapsed(state.last_battery_update) > BatteryUpdateInterval && + resp_buf.empty()) { + state.last_battery_update = timer_read(); + + if (at_command_P(PSTR("AT+HWVBAT"), resbuf, sizeof(resbuf))) { + state.vbat = atoi(resbuf); + } + } +#endif +} + +static bool process_queue_item(struct queue_item *item, uint16_t timeout) { + char cmdbuf[48]; + char fmtbuf[64]; + + // Arrange to re-check connection after keys have settled + state.last_connection_update = timer_read(); + +#if 1 + if (TIMER_DIFF_16(state.last_connection_update, item->added) > 0) { + dprintf("send latency %dms\n", + TIMER_DIFF_16(state.last_connection_update, item->added)); + } +#endif + + switch (item->queue_type) { + case QTKeyReport: + strcpy_P(fmtbuf, + PSTR("AT+BLEKEYBOARDCODE=%02x-00-%02x-%02x-%02x-%02x-%02x-%02x")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->key.modifier, + item->key.keys[0], item->key.keys[1], item->key.keys[2], + item->key.keys[3], item->key.keys[4], item->key.keys[5]); + return at_command(cmdbuf, NULL, 0, true, timeout); + + case QTConsumer: + strcpy_P(fmtbuf, PSTR("AT+BLEHIDCONTROLKEY=0x%04x")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->consumer); + return at_command(cmdbuf, NULL, 0, true, timeout); + +#ifdef MOUSE_ENABLE + case QTMouseMove: + strcpy_P(fmtbuf, PSTR("AT+BLEHIDMOUSEMOVE=%d,%d,%d,%d")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->mousemove.x, + item->mousemove.y, item->mousemove.scroll, item->mousemove.pan); + return at_command(cmdbuf, NULL, 0, true, timeout); +#endif + default: + return true; + } +} + +bool adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, + uint8_t nkeys) { + struct queue_item item; + bool didWait = false; + + item.queue_type = QTKeyReport; + item.key.modifier = hid_modifier_mask; + item.added = timer_read(); + + while (nkeys >= 0) { + item.key.keys[0] = keys[0]; + item.key.keys[1] = nkeys >= 1 ? keys[1] : 0; + item.key.keys[2] = nkeys >= 2 ? keys[2] : 0; + item.key.keys[3] = nkeys >= 3 ? keys[3] : 0; + item.key.keys[4] = nkeys >= 4 ? keys[4] : 0; + item.key.keys[5] = nkeys >= 5 ? keys[5] : 0; + + if (!send_buf.enqueue(item)) { + if (!didWait) { + dprint("wait for buf space\n"); + didWait = true; + } + send_buf_send_one(); + continue; + } + + if (nkeys <= 6) { + return true; + } + + nkeys -= 6; + keys += 6; + } + + return true; +} + +bool adafruit_ble_send_consumer_key(uint16_t keycode, int hold_duration) { + struct queue_item item; + + item.queue_type = QTConsumer; + item.consumer = keycode; + + while (!send_buf.enqueue(item)) { + send_buf_send_one(); + } + return true; +} + +#ifdef MOUSE_ENABLE +bool adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, + int8_t pan) { + struct queue_item item; + + item.queue_type = QTMouseMove; + item.mousemove.x = x; + item.mousemove.y = y; + item.mousemove.scroll = scroll; + item.mousemove.pan = pan; + + while (!send_buf.enqueue(item)) { + send_buf_send_one(); + } + return true; +} +#endif + +uint32_t adafruit_ble_read_battery_voltage(void) { + return state.vbat; +} + +bool adafruit_ble_set_mode_leds(bool on) { + if (!state.configured) { + return false; + } + + // The "mode" led is the red blinky one + at_command_P(on ? PSTR("AT+HWMODELED=1") : PSTR("AT+HWMODELED=0"), NULL, 0); + + // Pin 19 is the blue "connected" LED; turn that off too. + // When turning LEDs back on, don't turn that LED on if we're + // not connected, as that would be confusing. + at_command_P(on && state.is_connected ? PSTR("AT+HWGPIO=19,1") + : PSTR("AT+HWGPIO=19,0"), + NULL, 0); + return true; +} + +// https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/ble-generic#at-plus-blepowerlevel +bool adafruit_ble_set_power_level(int8_t level) { + char cmd[46]; + if (!state.configured) { + return false; + } + snprintf(cmd, sizeof(cmd), "AT+BLEPOWERLEVEL=%d", level); + return at_command(cmd, NULL, 0, false); +} diff --git a/tmk_core/protocol/lufa/adafruit_ble.h b/tmk_core/protocol/lufa/adafruit_ble.h new file mode 100644 index 000000000..351fd55ae --- /dev/null +++ b/tmk_core/protocol/lufa/adafruit_ble.h @@ -0,0 +1,60 @@ +/* Bluetooth Low Energy Protocol for QMK. + * Author: Wez Furlong, 2016 + * Supports the Adafruit BLE board built around the nRF51822 chip. + */ +#pragma once +#ifdef ADAFRUIT_BLE_ENABLE +#include <stdbool.h> +#include <stdint.h> +#include <string.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* Instruct the module to enable HID keyboard support and reset */ +extern bool adafruit_ble_enable_keyboard(void); + +/* Query to see if the BLE module is connected */ +extern bool adafruit_ble_query_is_connected(void); + +/* Returns true if we believe that the BLE module is connected. + * This uses our cached understanding that is maintained by + * calling ble_task() periodically. */ +extern bool adafruit_ble_is_connected(void); + +/* Call this periodically to process BLE-originated things */ +extern void adafruit_ble_task(void); + +/* Generates keypress events for a set of keys. + * The hid modifier mask specifies the state of the modifier keys for + * this set of keys. + * Also sends a key release indicator, so that the keys do not remain + * held down. */ +extern bool adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, + uint8_t nkeys); + +/* Send a consumer keycode, holding it down for the specified duration + * (milliseconds) */ +extern bool adafruit_ble_send_consumer_key(uint16_t keycode, int hold_duration); + +#ifdef MOUSE_ENABLE +/* Send a mouse/wheel movement report. + * The parameters are signed and indicate positive of negative direction + * change. */ +extern bool adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, + int8_t pan); +#endif + +/* Compute battery voltage by reading an analog pin. + * Returns the integer number of millivolts */ +extern uint32_t adafruit_ble_read_battery_voltage(void); + +extern bool adafruit_ble_set_mode_leds(bool on); +extern bool adafruit_ble_set_power_level(int8_t level); + +#ifdef __cplusplus +} +#endif + +#endif // ADAFRUIT_BLE_ENABLE diff --git a/tmk_core/protocol/lufa/ringbuffer.hpp b/tmk_core/protocol/lufa/ringbuffer.hpp new file mode 100644 index 000000000..70a3c4881 --- /dev/null +++ b/tmk_core/protocol/lufa/ringbuffer.hpp @@ -0,0 +1,66 @@ +#pragma once +// A simple ringbuffer holding Size elements of type T +template <typename T, uint8_t Size> +class RingBuffer { + protected: + T buf_[Size]; + uint8_t head_{0}, tail_{0}; + public: + inline uint8_t nextPosition(uint8_t position) { + return (position + 1) % Size; + } + + inline uint8_t prevPosition(uint8_t position) { + if (position == 0) { + return Size - 1; + } + return position - 1; + } + + inline bool enqueue(const T &item) { + static_assert(Size > 1, "RingBuffer size must be > 1"); + uint8_t next = nextPosition(head_); + if (next == tail_) { + // Full + return false; + } + + buf_[head_] = item; + head_ = next; + return true; + } + + inline bool get(T &dest, bool commit = true) { + auto tail = tail_; + if (tail == head_) { + // No more data + return false; + } + + dest = buf_[tail]; + tail = nextPosition(tail); + + if (commit) { + tail_ = tail; + } + return true; + } + + inline bool empty() const { return head_ == tail_; } + + inline uint8_t size() const { + int diff = head_ - tail_; + if (diff >= 0) { + return diff; + } + return Size + diff; + } + + inline T& front() { + return buf_[tail_]; + } + + inline bool peek(T &item) { + return get(item, false); + } +}; |