diff options
211 files changed, 5569 insertions, 2476 deletions
diff --git a/bootloader.mk b/bootloader.mk index a7e596e47..ab1ced0ea 100644 --- a/bootloader.mk +++ b/bootloader.mk @@ -28,6 +28,7 @@ # bootloadHID HIDBootFlash compatible (ATmega32A) # USBasp USBaspLoader (ATmega328P) # kiibohd Input:Club Kiibohd bootloader (only used on their boards) +# stm32duino STM32Duino (STM32F103x8) # # BOOTLOADER_SIZE can still be defined manually, but it's recommended # you add any possible configuration to this list @@ -106,3 +107,14 @@ ifeq ($(strip $(BOOTLOADER)), kiibohd) DFU_ARGS = -d 1C11:B007 DFU_SUFFIX_ARGS = -v 1C11 -p B007 endif + +ifeq ($(strip $(BOOTLOADER)), stm32duino) + OPT_DEFS += -DBOOTLOADER_STM32DUINO + MCU_LDSCRIPT ?= STM32F103x8_stm32duino_bootloader + BOARD = STM32_F103_STM32DUINO + # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense + STM32_BOOTLOADER_ADDRESS = 0x80000000 + + DFU_ARGS = -d 1EAF:0003 -a2 -R + DFU_SUFFIX_ARGS = -v 1EAF -p 0003 +endif diff --git a/docs/cli_commands.md b/docs/cli_commands.md index bb0de3c0d..fe6f06632 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -167,6 +167,17 @@ Creates a keymap.c from a QMK Configurator export. qmk json2c [-o OUTPUT] filename ``` +## `qmk c2json` + +Creates a keymap.json from a keymap.c. +**Note:** Parsing C source files is not easy, therefore this subcommand may not work your keymap. In some cases not using the C pre-processor helps. + +**Usage**: + +``` +qmk c2json [--no-cpp] [-o OUTPUT] filename +``` + ## `qmk list-keyboards` This command lists all the keyboards currently defined in `qmk_firmware` diff --git a/docs/faq_build.md b/docs/faq_build.md index 131844a2b..a97a0e0c3 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -24,12 +24,18 @@ On Linux, you'll need proper privileges to communicate with the bootloader devic **/etc/udev/rules.d/50-qmk.rules:** ``` # Atmel DFU -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U2 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U2 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U4 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U4 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB64 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB128 +### ATmega16U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess" +### ATmega32U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess" +### ATmega16U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" +### ATmega32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" +### AT90USB64 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" +### AT90USB128 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" # Input Club SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess" @@ -50,22 +56,33 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uacc SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Caterina (Pro Micro) -# Spark Fun Electronics -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 3V3/8MHz -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 5V/16MHz -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # LilyPad 3V3/8MHz (and some Pro Micro clones) -# Pololu Electronics -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # A-Star 32U4 -# Arduino SA -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro -# Adafruit Industries LLC -SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Feather 32U4 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 3V3/8MHz -SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 5V/16MHz -# dog hunter AG -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro +## Spark Fun Electronics +### Pro Micro 3V3/8MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### Pro Micro 5V/16MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### LilyPad 3V3/8MHz (and some Pro Micro clones) +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +## Pololu Electronics +### A-Star 32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +## Arduino SA +### Leonardo +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### Micro +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +## Adafruit Industries LLC +### Feather 32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### ItsyBitsy 32U4 3V3/8MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### ItsyBitsy 32U4 5V/16MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +## dog hunter AG +### Leonardo +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### Micro +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" ``` Once added, run the following: diff --git a/docs/feature_combo.md b/docs/feature_combo.md index d3eb896b2..d831328f6 100644 --- a/docs/feature_combo.md +++ b/docs/feature_combo.md @@ -55,7 +55,7 @@ combo_t key_combos[COMBO_COUNT] = { [XV_PASTE] = COMBO_ACTION(paste_combo), }; -void process_combo_event(uint8_t combo_index, bool pressed) { +void process_combo_event(uint16_t combo_index, bool pressed) { switch(combo_index) { case ZC_COPY: if (pressed) { diff --git a/docs/feature_debounce_type.md b/docs/feature_debounce_type.md index 83ebafe60..966e75acc 100644 --- a/docs/feature_debounce_type.md +++ b/docs/feature_debounce_type.md @@ -76,8 +76,8 @@ susceptible to noise, you must choose a debounce method that will also mitigate * Defer algorithms are noise-resistant * Recommended naming conventions: * ```sym_defer_*``` - * ```asym_defer_*_*```: key-down is using eager algorithm - * ```asym_*_defer_*```: key-up is using eager algorithm + * ```asym_defer_*_*```: key-down is using defer algorithm + * ```asym_*_defer_*```: key-up is using defer algorithm 4) Global vs Per-Key vs Per-Row * Global - one timer for all keys. Any key change state affects global timer diff --git a/docs/ja/breaking_changes.md b/docs/ja/breaking_changes.md index 936d0a472..0f7256e68 100644 --- a/docs/ja/breaking_changes.md +++ b/docs/ja/breaking_changes.md @@ -2,8 +2,8 @@ <!--- grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh - original document: 0.9.0:docs/breaking_changes.md - git diff 0.9.0 HEAD -- docs/breaking_changes.md | cat + original document: 0.10.33:docs/breaking_changes.md + git diff 0.10.33 HEAD -- docs/breaking_changes.md | cat --> このドキュメントは QMK の互換性を破る変更(Breaking change) のプロセスについて説明します。 @@ -15,22 +15,23 @@ Breaking change ピリオドとは、危険な変更、または予想外の変 ## 過去の Breaking change には何が含まれますか？ +* [2020年8月29日](ja/ChangeLog/20200829.md) * [2020年5月30日](ja/ChangeLog/20200530.md) * [2020年2月29日](ja/ChangeLog/20200229.md) * [2019年8月30日](ja/ChangeLog/20190830.md) ## 次の Breaking change はいつですか？ -次の Breaking change は2020年8月29日に予定されています。 +次の Breaking change は2020年11月28日に予定されています。 ### 重要な日付 -* [x] 2020年 5月30日 - `develop` が作成されました。毎週リベースされます。 -* [ ] 2020年 8月 1日 - `develop` は新しいPRを取り込みません。 -* [ ] 2020年 8月 1日 - テスターの募集。 -* [ ] 2020年 8月27日 - `master`がロックされ、PR はマージされません。 -* [ ] 2020年 8月29日 - `develop` を `master` にマージします。 -* [ ] 2020年 8月29日 - `master` のロックが解除されます。PR を再びマージすることができます。 +* [x] 2020年 8月29日 - `develop` が作成されました。毎週リベースされます。 +* [ ] 2020年10月31日 - `develop` は新しいPRを取り込みません。 +* [ ] 2020年10月31日 - テスターの募集。 +* [ ] 2020年11月26日 - `master`がロックされ、PR はマージされません。 +* [ ] 2020年11月28日 - `develop` を `master` にマージします。 +* [ ] 2020年11月28日 - `master` のロックが解除されます。PR を再びマージすることができます。 ## どのような変更が含まれますか？ diff --git a/docs/ja/config_options.md b/docs/ja/config_options.md index 2a64f2ba2..67e973030 100644 --- a/docs/ja/config_options.md +++ b/docs/ja/config_options.md @@ -1,8 +1,8 @@ # QMK の設定 <!--- - original document: 0.9.43:docs/config_options.md - git diff 0.9.43 HEAD -- docs/config_options.md | cat + original document: 0.10.33:docs/config_options.md + git diff 0.10.33 HEAD -- docs/config_options.md | cat --> QMK はほぼ無制限に設定可能です。可能なところはいかなるところでも、やりすぎな程、ユーザーがコードサイズを犠牲にしてでも彼らのキーボードをカスタマイズをすることを許しています。ただし、このレベルの柔軟性により設定が困難になります。 diff --git a/docs/ja/custom_quantum_functions.md b/docs/ja/custom_quantum_functions.md index 161d7e4b5..d02ef3a11 100644 --- a/docs/ja/custom_quantum_functions.md +++ b/docs/ja/custom_quantum_functions.md @@ -1,8 +1,8 @@ # キーボードの挙動をカスタマイズする方法 <!--- - original document: 0.9.43:docs/custom_quantum_functions.md - git diff 0.9.43 HEAD -- docs/custom_quantum_functions.md | cat + original document: 0.10.33:docs/custom_quantum_functions.md + git diff 0.10.33 HEAD -- docs/custom_quantum_functions.md | cat --> 多くの人にとって、カスタムキーボードはボタンの押下をコンピュータに送信するだけではありません。単純なボタンの押下やマクロよりも複雑なことを実行できるようにしたいでしょう。QMK にはコードを挿入したり、機能を上書きしたり、様々な状況でキーボードの挙動をカスタマイズできるフックがあります。 diff --git a/docs/ja/documentation_best_practices.md b/docs/ja/documentation_best_practices.md index 50ec4ea6a..c866d3959 100644 --- a/docs/ja/documentation_best_practices.md +++ b/docs/ja/documentation_best_practices.md @@ -1,8 +1,8 @@ # ドキュメントベストプラクティス <!--- - original document: 0.9.19:docs/documentation_best_practices.md - git diff 0.9.19 HEAD -- docs/documentation_best_practices.md | cat + original document: 0.10.33:docs/documentation_best_practices.md + git diff 0.10.33 HEAD -- docs/documentation_best_practices.md | cat --> このページは QMK のためのドキュメントを作成する時のベストプラクティスを文章化するためのものです。これらのガイドラインに従うことで、一貫したトーンとスタイルを維持することでき、他の人が QMK をより理解しやすくすることができます。 diff --git a/docs/ja/faq_build.md b/docs/ja/faq_build.md index 62c36f249..3c93c0780 100644 --- a/docs/ja/faq_build.md +++ b/docs/ja/faq_build.md @@ -1,8 +1,8 @@ # よくあるビルドの質問 <!--- - original document: 0.9.43:docs/faq_build.md - git diff 0.9.43 HEAD -- docs/faq_build.md | cat + original document: 0.10.33:docs/faq_build.md + git diff 0.10.33 HEAD -- docs/faq_build.md | cat --> このページは QMK のビルドに関する質問を説明します。まだビルドをしていない場合は、[ビルド環境のセットアップ](ja/getting_started_build_tools.md) および [Make 手順](ja/getting_started_make_guide.md)ガイドを読むべきです。 @@ -18,62 +18,91 @@ あるいは、単純に: - $ sudo make <keyboard>:<keymap>:dfu + $ sudo make <keyboard>:<keymap>:flash `make` を `sudo` で実行することは一般的には良い考えでは***なく***、可能であれば前者の方法のいずれかを使うべきです。 ### Linux の `udev` ルール -Linux では、MCU にアクセスするには適切な権限が必要です。ファームウェアを書き込む時に `sudo` を使うか、`/etc/udev/rules.d/` にこれらのファイルを配置することで、アクセスすることができます。権限の追加が完了したら、以下を実行します: -```console -sudo udevadm control --reload-rules -sudo udevadm trigger -``` -**/etc/udev/rules.d/50-atmel-dfu.rules:** -``` -# Atmel ATMega32U4 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess", RUN{builtin}+="uaccess" -# Atmel USBKEY AT90USB1287 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess", RUN{builtin}+="uaccess" -# Atmel ATMega32U2 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess", RUN{builtin}+="uaccess" +Linux では、ブートローダデバイスと通信するには適切な権限が必要です。ファームウェアを書き込む時に `sudo` を使うか、`/etc/udev/rules.d/` にこのファイルを配置することで、通信することができます。 + +**/etc/udev/rules.d/50-qmk.rules:** ``` +# Atmel DFU +### ATmega16U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess" +### ATmega32U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess" +### ATmega16U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" +### ATmega32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" +### AT90USB64 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" +### AT90USB128 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" -**/etc/udev/rules.d/54-input-club-keyboard.rules:** +# Input Club +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess" -``` -# Input Club keyboard bootloader -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess", RUN{builtin}+="uaccess" -``` +# STM32duino +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1EAF", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess" +# STM32 DFU +SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="DF11", TAG+="uaccess", RUN{builtin}+="uaccess" + +# BootloadHID +SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DF", TAG+="uaccess", RUN{builtin}+="uaccess" + +# USBAspLoader +SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uaccess", RUN{builtin}+="uaccess" -**/etc/udev/rules.d/55-caterina.rules:** -``` # ModemManager should ignore the following devices -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +# Atmel SAM-BA (Massdrop) +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" + +# Caterina (Pro Micro) +## Spark Fun Electronics +### Pro Micro 3V3/8MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### Pro Micro 5V/16MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### LilyPad 3V3/8MHz (and some Pro Micro clones) +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +## Pololu Electronics +### A-Star 32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +## Arduino SA +### Leonardo SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### Micro +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +## Adafruit Industries LLC +### Feather 32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### ItsyBitsy 32U4 3V3/8MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### ItsyBitsy 32U4 5V/16MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +## dog hunter AG +### Leonardo +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +### Micro +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" ``` -**注意:** 古い(1.12以前の) ModemManager では、フィルタリングは厳密なモードではない場合にのみ動作し、以下のコマンドはその設定を更新することができます。 -```console -printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf -sudo systemctl daemon-reload -sudo systemctl restart ModemManager -``` +追加が完了したら、以下を実行します: -**/etc/udev/rules.d/56-dfu-util.rules:** ``` -# stm32duino -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess" -# Generic stm32 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess", RUN{builtin}+="uaccess" +sudo udevadm control --reload-rules +sudo udevadm trigger ``` -**/etc/udev/rules.d/57-bootloadhid.rules:** +**注意:** 古い(1.12以前の) ModemManager では、フィルタリングは厳密なモードではない場合にのみ動作し、以下のコマンドはその設定を更新することができます。 + ``` -# bootloadHID -SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess", RUN{builtin}+="uaccess" +printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf +sudo systemctl daemon-reload +sudo systemctl restart ModemManager ``` ### Linux のブートローダモードで Serial デバイスが検知されない @@ -99,46 +128,6 @@ https://github.com/tmk/tmk_keyboard/issues/150 - http://www.obdev.at/products/vusb/license.html - http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1 -## AVR のための BOOTLOADER_SIZE -Teensy2.0++ ブートローダのサイズは 2048 バイトであることに注意してください。一部の Makefile には間違ったコメントがあります。 - -``` -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 2048 -# Atmel DFU loader 4096 (TMK Alt Controller) -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 -``` - -## MacOS での `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` - -これは brew での更新に関する問題で、avr-gcc が依存するシンボリックリンクを壊します。 - -解決法は全ての影響を受けたモジュールを削除し再インストールすることです。 - -``` -brew rm avr-gcc avr-gcc@8 dfu-programmer dfu-util gcc-arm-none-eabi arm-gcc-bin@8 avrdude qmk -brew install qmk/qmk/qmk -brew link --force avr-gcc@8 -brew link --force arm-gcc-bin@8 -``` - -### `avr-gcc` と LUFA - -`avr-gcc` を更新し、LUFA に関連するエラーが表示された場合、例えば: - -`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'` - -今のところ、Homebrew で `avr-gcc` を 8 にロールバックする必要があります。 - -``` -brew uninstall --force avr-gcc -brew install avr-gcc@8 -brew link --force avr-gcc@8 -``` - ### キーボードに書き込んだが何も起こらない、あるいはキーの押下が登録されない - ARM (rev6 planck、clueboard 60、hs60v2 など) でも同じ (Feb 2019) ARM ベースのチップ上での EEPROM の動作によって、保存された設定が無効になる場合があります。これはデフォルトレイヤに影響し、まだ調査中の特定の環境下でキーボードが使えなくなる*しれません*。EEPROM のリセットでこれが修正されます。 diff --git a/docs/ja/faq_debug.md b/docs/ja/faq_debug.md index b70edf63d..39965b675 100644 --- a/docs/ja/faq_debug.md +++ b/docs/ja/faq_debug.md @@ -1,8 +1,8 @@ # デバッグの FAQ <!--- - original document: 0.9.10:docs/faq_debug.md - git diff 0.9.10 HEAD -- docs/faq_debug.md | cat + original document: 0.10.33:docs/faq_debug.md + git diff 0.10.33 HEAD -- docs/faq_debug.md | cat --> このページは、キーボードのトラブルシューティングについての様々な一般的な質問を説明します。 @@ -36,20 +36,6 @@ Linux のような OS でデバイスにアクセスするには、権限が必 - デバッグ print の代わりに 'print' 関数を使ってみてください。**common/print.h** を見てください。 - コンソール機能を持つ他のデバイスを切断します。[Issue #97](https://github.com/tmk/tmk_keyboard/issues/97) を見てください。 -## Linux あるいは UNIX のようなシステムはスーパーユーザ権限を必要とします -権限付きで *hid_listen* を実行するために 'sudo' を使ってください。 -``` -$ sudo hid_listen -``` - -または rules ディレクトリにファイルを置いて、TMK デバイスのための *udev rule* を追加します。ディレクトリは各システムで異なるかもしれません。 - -File: /etc/udev/rules.d/52-tmk-keyboard.rules (Ubuntu の場合) -``` -# tmk keyboard products https://github.com/tmk/tmk_keyboard -SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666" -``` - *** # 雑多なこと diff --git a/docs/ja/feature_auto_shift.md b/docs/ja/feature_auto_shift.md index 50d40b17b..cf67b3397 100644 --- a/docs/ja/feature_auto_shift.md +++ b/docs/ja/feature_auto_shift.md @@ -1,8 +1,8 @@ # 自動シフト: なぜシフトキーが必要ですか？ <!--- - original document: 0.9.0:docs/feature_auto_shift.md - git diff 0.9.0 HEAD -- docs/feature_auto_shift.md | cat + original document: 0.10.33:docs/feature_auto_shift.md + git diff 0.10.33 HEAD -- docs/feature_auto_shift.md | cat --> キーをタップすると、その文字を取得します。キーをタップするが、*わずかに*長く押し続けると、シフト状態になります。ほら！シフトキーは必要ありません！ @@ -109,7 +109,7 @@ AからZを含むアルファベット文字を自動シフトしません。 5. タイムアウトを増やすことに決めた場合は、`KC_ASUP` にマップしたキーを押し、ステップ1に戻ります。 6. 結果に満足したら、`KC_ASRP` にマップしたキーを押します。キーボードは `AUTO_SHIFT_TIMEOUT` の値を自動的に入力します。 7. 報告された値で `config.h` の `AUTO_SHIFT_TIMEOUT` を更新します。 -8. `config.h` から `AUTO_SHIFT_SETUP` を削除します。 +8. `config.h` に `AUTO_SHIFT_NO_SETUP` を追加します。 9. `KC_ASDN`、`KC_ASUP` および `KC_ASRP` のキーバインディングを削除します。 10. 新しいファームウェアをコンパイルしてアップロードします。 diff --git a/docs/ja/feature_backlight.md b/docs/ja/feature_backlight.md index 9647f215d..88afa6c5f 100644 --- a/docs/ja/feature_backlight.md +++ b/docs/ja/feature_backlight.md @@ -1,8 +1,8 @@ # バックライト :id=backlighting <!--- - original document: 0.9.44:docs/feature_backlight.md - git diff 0.9.44 HEAD -- docs/feature_backlight.md | cat + original document: 0.10.33:docs/feature_backlight.md + git diff 0.10.33 HEAD -- docs/feature_backlight.md | cat --> 多くのキーボードは、キースイッチを貫通して配置されたり、キースイッチの下に配置された個々の LED によって、バックライトキーをサポートします。この機能は通常スイッチごとに単一の色しか使用できないため、[RGB アンダーグロー](ja/feature_rgblight.md)および [RGB マトリックス](ja/feature_rgb_matrix.md)機能のどちらとも異なりますが、キーボードに複数の異なる単一色の LED を取り付けることは当然可能です。 @@ -165,8 +165,6 @@ BACKLIGHT_DRIVER = pwm 現在のところ、ハードウェア PWM のみがサポートされ、タイマー支援はなく、自動設定は提供されません。 -?> STM32F072 のバックライトサポートのテストは制限されています。人によって違うかもしれません。不明な場合は、`rules.mk` で `BACKLIGHT_ENABLE = no` を設定します。 - ### ソフトウェア PWM ドライバ :id=software-pwm-driver このモードでは、他のキーボードのタスクを実行中に PWM は「エミュレート」されます。追加のプラットフォーム設定なしで最大のハードウェア互換性を提供します。トレードオフは、キーボードが忙しい時にバックライトが揺れる可能性があることです。有効にするには、`rules.mk` に以下を追加します: diff --git a/docs/ja/feature_bluetooth.md b/docs/ja/feature_bluetooth.md index f7835dd54..3c71a18ec 100644 --- a/docs/ja/feature_bluetooth.md +++ b/docs/ja/feature_bluetooth.md @@ -1,18 +1,18 @@ # Bluetooth <!--- - original document: 0.9.0:docs/feature_bluetooth.md - git diff 0.9.0 HEAD -- docs/feature_bluetooth.md | cat + original document: 0.10.33:docs/feature_bluetooth.md + git diff 0.10.33 HEAD -- docs/feature_bluetooth.md | cat --> ## Bluetooth の既知のサポートハードウェア 現在のところ Bluetooth のサポートは AVR ベースのチップに限られます。Bluetooth 2.1 については、QMK は RN-42 モジュールをサポートします。より最近の BLE プロトコルについては、現在のところ Adafruit Bluefruit SPI Friend のみが直接サポートされています。iOS デバイスに接続するには、BLE が必要です。iOS はマウス入力をサポートしないことに注意してください。 -| ボード | Bluetooth プロトコル | 接続タイプ | rules.mk | Bluetooth チップ | -|----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------| -| Roving Networks RN-42 (Sparkfun Bluesmirf) | Bluetooth Classic | UART | `BLUETOOTH = RN42` | RN-42 | -| [Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633) | Bluetooth Low Energy | SPI | `BLUETOOTH = AdafruitBLE` | nRF51822 | +| ボード | Bluetooth プロトコル | 接続タイプ | rules.mk | Bluetooth チップ | +| ---------------------------------------------------------------- | -------------------- | ---------- | ------------------------- | ---------------- | +| Roving Networks RN-42 (Sparkfun Bluesmirf) | Bluetooth Classic | UART | `BLUETOOTH = RN42` | RN-42 | +| [Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633) | Bluetooth Low Energy | SPI | `BLUETOOTH = AdafruitBLE` | nRF51822 | まだサポートされていませんが、可能性のあるもの: * [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479)。[tmk 実装がおそらく見つかります](https://github.com/tmk/tmk_keyboard/issues/514) @@ -30,7 +30,10 @@ Bluefruit UART friend は SPI friend に変換することができますが、 <!-- FIXME: Document bluetooth support more completely. --> ## Bluetooth の Rules.mk オプション -これらのうちの1つだけを使ってください + +現在サポートされている Bluetooth チップセットは [N-キーロールオーバー (NKRO)](ja/reference_glossary.md#n-key-rollover-nkro) をサポートしていません。そのため、`rules.mk` に `NKRO_ENABLE = no` を含めなければなりません。 + +Bluetooth を有効にするには、以下のうちの1つだけを使ってください: * BLUETOOTH_ENABLE = yes (レガシーオプション) * BLUETOOTH = RN42 * BLUETOOTH = AdafruitBLE @@ -39,8 +42,8 @@ Bluefruit UART friend は SPI friend に変換することができますが、 これは複数のキーボードの出力が選択できる場合に使われます。現在のところ、これは USB と Bluetooth の両方をサポートするキーボードで、それらの間の切り替えのみが可能です。 -| 名前 | 説明 | -|----------|----------------------------------------------| +| 名前 | 説明 | +| ---------- | ------------------------------------- | | `OUT_AUTO` | USB と Bluetooth を自動的に切り替える | -| `OUT_USB` | USB のみ | -| `OUT_BT` | Bluetooth のみ | +| `OUT_USB` | USB のみ | +| `OUT_BT` | Bluetooth のみ | diff --git a/docs/ja/feature_dynamic_macros.md b/docs/ja/feature_dynamic_macros.md index f3e587136..951b90312 100644 --- a/docs/ja/feature_dynamic_macros.md +++ b/docs/ja/feature_dynamic_macros.md @@ -1,8 +1,8 @@ # 動的マクロ: ランタイムでのマクロの記録および再生 <!--- - original document: 0.9.43:docs/feature_dynamic_macros.md - git diff 0.9.43 HEAD -- docs/feature_dynamic_macros.md | cat + original document: 0.10.33:docs/feature_dynamic_macros.md + git diff 0.10.33 HEAD -- docs/feature_dynamic_macros.md | cat --> QMK はその場で作られた一時的なマクロをサポートします。これらを動的マクロと呼びます。それらはユーザがキーボードから定義し、キーボードのプラグを抜くか再起動すると失われます。 diff --git a/docs/ja/feature_leader_key.md b/docs/ja/feature_leader_key.md index 538358a6b..61d6f5a8e 100644 --- a/docs/ja/feature_leader_key.md +++ b/docs/ja/feature_leader_key.md @@ -1,8 +1,8 @@ # リーダーキー: 新しい種類のモディファイア <!--- - original document: 0.8.134:docs/feature_leader_key.md - git diff 0.8.134 HEAD -- docs/feature_leader_key.md | cat + original document: 0.10.33:docs/feature_leader_key.md + git diff 0.10.33 HEAD -- docs/feature_leader_key.md | cat --> もしあなたが Vim を使ったことがある場合、リーダーキーは何であるかを知っています。そうでなければ、素晴らしい概念を発見しようとしています。:) 例えば、Alt+Shift+W を押す(3つのキーを同時に押す)代わりに、キーの_シーケンス_を押すことができたらどうでしょう？つまり、特別なモディファイア (リーダーキー)を押して、続けて W と C を押すと (単純にキーを高速に繋げます)、何かが起こります。 diff --git a/docs/ja/feature_stenography.md b/docs/ja/feature_stenography.md index faed0ee1b..45a799be4 100644 --- a/docs/ja/feature_stenography.md +++ b/docs/ja/feature_stenography.md @@ -1,8 +1,8 @@ # QMK での速記 :id=stenography-in-qmk <!--- - original document: 0.9.19:docs/feature_stenography.md - git diff 0.9.19 HEAD -- docs/feature_stenography.md | cat + original document: 0.10.33:docs/feature_stenography.md + git diff 0.10.33 HEAD -- docs/feature_stenography.md | cat --> [速記](https://en.wikipedia.org/wiki/Stenotype)は裁判所のレポート、字幕および耳が不自由な人のためのリアルタイムの文字起こしで最もよく使われる記述方法です。速記では単語はスペル、音声およびショートカット(短い)ストロークが混在する音節ごとに音節化されます。プロの速記者は、標準的なタイピングで通常見られる負担を掛けずに、はるかに少ないエラー(99.9%より高い精度)で、200-300 WPM に到達できます。 diff --git a/docs/ja/feature_tap_dance.md b/docs/ja/feature_tap_dance.md index 01d060757..3d9d30ecf 100644 --- a/docs/ja/feature_tap_dance.md +++ b/docs/ja/feature_tap_dance.md @@ -1,9 +1,9 @@ # タップダンス: 1つのキーが3つ、5つまたは100の異なる動作をします <!--- - original document: 0.9.44:docs/feature_tap_dance.md - git diff 0.9.44 HEAD -- docs/feature_tap_dance.md | cat ---> + original document: 0.10.33:docs/feature_tap_dance.md + git diff 0.10.33 HEAD -- docs/feature_tap_dance.md | cat +--> ## イントロダクション :id=introduction @@ -32,7 +32,9 @@ * `ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)`: 1回タップすると `kc` キーコードが送信され、2回タップすると `layer` の状態をトグルします(これは `TG` レイヤーキーコードのように機能します)。 * `ACTION_TAP_DANCE_FN(fn)`: ユーザーキーマップに定義した指定の関数が呼び出されます。タップダンス実行の回数分タップすると、最後の時点で呼び出されます。 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: タップする度にユーザーキーマップに定義した最初の関数が呼び出されます。タップダンスの実行が終わった時点で2番目の関数が呼び出され、タップダンスの実行をリセットするときに最後の関数が呼び出されます。 -* `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: これは `ACTION_TAP_DANCE_FN_ADVANCED` と同じように機能します。しかし、`TAPPING_TERM` で事前に定義した時間に代えて、カスタマイズしたタップ時間を使えます。 +* ~~`ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`~~: これは `ACTION_TAP_DANCE_FN_ADVANCED` 関数と同じように機能します。しかし、`TAPPING_TERM` で事前に定義した時間の代わりに、カスタマイズしたタップ時間を使います。 + * [ここ](ja/custom_quantum_functions.md#Custom_Tapping_Term)で概説するように、これはキーごとのタッピング時間機能を優先して非推奨になりました。この特定のタップダンス機能を使う代わりに、使いたい特定の `TD()` マクロ(`TD(TD_ESC_CAPS)` のような)を確認する必要があります。 + 最初のオプションで、1つのキーに2つの役割を持たせる大抵のケースには十分です。例えば、`ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` は、1回タップすると `Space` を送信し、2回タップすると `Enter` を送信します。 @@ -55,7 +57,7 @@ 異なる場合、まず、古いタップダンスを処理し、続いて新しいタップダンスを登録します。 同じ場合、カウンタの値を増やし、タイマーをリセットします。 -このことは、あなたは再びキーをタップするまでの時間として `TAPPING_TERM` の時間を持っていることを意味します。そのため、あなたは1つの `TAPPING_TERM` の時間内に全てのタップを行う必要はありません。これにより、キーの反応への影響を最小限に抑えながら、より長いタップ回数を可能にします。 +このことは、あなたは再びキーをタップするまでの時間として `TAPPING_TERM` の時間を持っていることを意味します。そのため、あなたは1つの `TAPPING_TERM` の時間内に全てのタップを行う必要はありません。これにより、キーの反応への影響を最小限に抑えながら、より長いタップ回数を可能にします。 次は `matrix_scan_tap_dance()` です。この関数はタップダンスキーのタイムアウトを制御します。 diff --git a/docs/ja/flashing.md b/docs/ja/flashing.md index 158285145..b2c0dcd86 100644 --- a/docs/ja/flashing.md +++ b/docs/ja/flashing.md @@ -1,8 +1,8 @@ # 書き込みの手順とブートローダ情報 <!--- - original document: 0.9.10:docs/flashing.md - git diff 0.9.10 HEAD -- docs/flashing.md | cat + original document: 0.10.33:docs/flashing.md + git diff 0.10.33 HEAD -- docs/flashing.md | cat --> キーボードが使用するブートローダにはかなり多くの種類があり、ほぼ全てが異なる書き込みの方法を使います。幸いなことに、[QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) のようなプロジェクトは、あまり深く考える必要無しに様々なタイプと互換性を持つことを目指していますが、この文章では様々なタイプのブートローダとそれらを書き込むために利用可能な方法について説明します。 @@ -244,3 +244,4 @@ BOOTLOADER = bootloadHID * `:dfu-util-split-left` - デフォルトのオプション (`:dfu-util`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「左側の」 EEPROM の設定も行われます。 * `:dfu-util-split-right` - デフォルトのオプション (`:dfu-util`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「右側の」 EEPROM の設定も行われます。 * `:st-link-cli` - dfu-util ではなく、ST-LINK の CLI ユーティリティを介してファームウェアを書き込めます。 +* `:st-flash` - dfu-util ではなく、[STLink Tools](https://github.com/stlink-org/stlink) の `st-flash` ユーティリティを介してファームウェアを書き込めます。 diff --git a/docs/ja/getting_started_make_guide.md b/docs/ja/getting_started_make_guide.md index cbc824de8..08005877e 100644 --- a/docs/ja/getting_started_make_guide.md +++ b/docs/ja/getting_started_make_guide.md @@ -1,8 +1,8 @@ # より詳細な `make` 手順 <!--- - original document: 0.9.0:docs/getting_started_make_guide.md - git diff 0.9.0 HEAD -- docs/getting_started_make_guide.md | cat + original document: 0.10.33:docs/getting_started_make_guide.md + git diff 0.10.33 HEAD -- docs/getting_started_make_guide.md | cat --> `make` コマンドの完全な構文は `<keyboard_folder>:<keymap>:<target>` です: diff --git a/docs/ja/hardware_avr.md b/docs/ja/hardware_avr.md index 0cba943c1..1308c3fda 100644 --- a/docs/ja/hardware_avr.md +++ b/docs/ja/hardware_avr.md @@ -2,8 +2,8 @@ <!--- grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh - original document: 0.9.0:docs/hardware_avr.md - git diff 0.9.0 HEAD -- docs/hardware_avr.md | cat + original document: 0.10.33:docs/hardware_avr.md + git diff 0.10.33 HEAD -- docs/hardware_avr.md | cat --> このページでは QMK における AVR マイコンのサポートについて説明します。AVR マイコンには、Atmel 社製の atmega32u4、atmega32u2、at90usb1286 やその他のマイコンを含みます。AVR マイコンは、簡単に動かせるよう設計された8ビットの MCU です。キーボードでよく使用される AVR マイコンには USB 機能や大きなキーボードマトリックスのためのたくさんの GPIO を搭載しています。これらは、現在、キーボードで使われる最も一般的な MCU です。 diff --git a/docs/ja/hardware_keyboard_guidelines.md b/docs/ja/hardware_keyboard_guidelines.md index ebcbb1554..2be099985 100644 --- a/docs/ja/hardware_keyboard_guidelines.md +++ b/docs/ja/hardware_keyboard_guidelines.md @@ -2,8 +2,8 @@ <!--- grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh - original document: 0.9.0:docs/hardware_keyboard_guidelines.md - git diff 0.9.0 HEAD -- docs/hardware_keyboard_guidelines.md | cat + original document: 0.10.33:docs/hardware_keyboard_guidelines.md + git diff 0.10.33 HEAD -- docs/hardware_keyboard_guidelines.md | cat --> QMK は開始以来、コミュニティにおけるキーボードの作成や保守に貢献しているあなたのような人たちのおかげで飛躍的に成長しました。私たちが成長するにつれて、うまくやるためのいくつかのパターンを発見しました。他の人たちがあなたの苦労の恩恵を受けやすくするため、それにあわせてもらえるようお願いします。 diff --git a/docs/ja/i2c_driver.md b/docs/ja/i2c_driver.md index 56425a2fd..9d348d580 100644 --- a/docs/ja/i2c_driver.md +++ b/docs/ja/i2c_driver.md @@ -2,8 +2,8 @@ <!--- grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh - original document: 0.8.62:docs/i2c_driver.md - git diff 0.8.62 HEAD -- docs/i2c_driver.md | cat + original document: 0.10.33:docs/i2c_driver.md + git diff 0.10.33 HEAD -- docs/i2c_driver.md | cat --> QMK で使われる I2C マスタドライバには、MCU 間のポータビリティを提供するための一連の関数が用意されています。 @@ -83,8 +83,8 @@ STM32 MCU では、使用するハードウェアドライバにより、さま |-----------------------|--------------------------------------------------------------------------------------------------|---------| | `I2C1_SCL_BANK` | SCL に使うピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`) | `GPIOB` | | `I2C1_SDA_BANK` | SDA に使うピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`) | `GPIOB` | -| `I2C1_SCL` | SCL のピン番号 (0-9) | `6` | -| `I2C1_SDA` | SDA のピン番号 (0-9) | `7` | +| `I2C1_SCL` | SCL のピン番号 (0-15) | `6` | +| `I2C1_SDA` | SDA のピン番号 (0-15) | `7` | | `I2C1_BANK`（非推奨） | 使用するピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)。後継は `I2C1_SCL_BANK`, `I2C1_SDA_BANK` です。 | `GPIOB` | ChibiOS I2C ドライバの設定項目は STM32 MCU の種類に依存します。 diff --git a/docs/ja/isp_flashing_guide.md b/docs/ja/isp_flashing_guide.md new file mode 100644 index 000000000..ae3918130 --- /dev/null +++ b/docs/ja/isp_flashing_guide.md @@ -0,0 +1,284 @@ +# ISP 書き込みガイド + +<!--- + grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh + original document: 0.9.46:docs/isp_flashing_guide.md + git diff 0.9.46 HEAD -- docs/isp_flashing_guide.md | cat +--> + +ISP 書き込み(ICSP 書き込みと呼ぶ場合もあります)とは、マイクロコントローラーを直接プログラミングするプロセスです。 +これにより、ブートローダを交換したり、コントローラの「ヒューズ」を変更することができ、コントローラの速度や起動方法、その他のオプションなど、多くのハードウェアおよびソフトウェア関連の機能を制御します。 + +QMK の ISP 書き込みの主な用途は、AVRベースのコントローラ（Pro Micro、または V-USB チップ）のブートローダの書き込みまたは交換です。 + +?> これは Pro Micro や他の ATmega コントローラなどの AVR ベースのボードをプログラミングするためだけのものです。 Proton C などの Arm コントローラには使用できません。 + +## 破損したブートローダーの取り扱い + +ボードの書き込み/消去で問題が発生し、DFU ベースのコントローラで次のような不可解なエラーメッセージが表示される場合： + + libusb: warning [darwin_transfer_status] transfer error: timed out + dfu.c:844: -ETIMEDOUT: Transfer timed out, NAK 0xffffffc4 (-60) + atmel.c:1627: atmel_flash: flash data dfu_download failed. + atmel.c:1629: Expected message length of 1072, got -60. + atmel.c:1434: Error flashing the block: err -2. + ERROR + Memory write error, use debug for more info. + commands.c:360: Error writing memory data. (err -4) + + dfu.c:844: -EPIPE: a) Babble detect or b) Endpoint stalled 0xffffffe0 (-32) + Device is write protected. + dfu.c:252: dfu_clear_status( 0x7fff4fc2ea80 ) + atmel.c:1434: Error flashing the block: err -2. + ERROR + Memory write error, use debug for more info. + commands.c:360: Error writing memory data. (err -4) + +または、Pro Micro ベースのコントローラに対して次のようなメッセージが表示された場合: + + avrdude: butterfly_recv(): programmer is not responding + avrdude: butterfly_recv(): programmer is not responding + avrdude: verification error, first mismatch at byte 0x002a + 0x2b != 0x75 + avrdude: verification error; content mismatch + avrdude: verification error; content mismatch + + +あなたのボード/デバイスを再び動作させるには、ISP 書き込みが必要になるかもしれません。 + +## 必要なハードウェア + +実際に ISP の書き込みを行うには、以下のいずれか（その後に使用するプロトコルが続きます）が必要になります。 + +* [SparkFun PocketAVR](https://www.sparkfun.com/products/9825) - (USB Tiny) +* [USBtinyISP AVR Programmer Kit](https://www.adafruit.com/product/46) - (USB Tiny) +* [Teensy 2.0](https://www.pjrc.com/store/teensy.html) - (avrisp) +* [Pro Micro](https://www.sparkfun.com/products/12640) - (avrisp) +* [Bus Pirate](https://www.adafruit.com/product/237) - (buspirate) + +ISP 書き込みに使用できるデバイスは他にもありますが、これらが主なものです。 +また、すべての製品リンクは公式バージョンへのものです。他の場所で入手することもできます。 + +また、「ISP プログラマ」をプログラミングするデバイスに配線するためのものも必要になります。 +PCB の中には直接使用できる ISP ヘッダがあるものもありますが、そうではない場合が多いので、コントローラ自体にハンダ付けするか、別のスイッチや他のコンポーネントにハンダ付けする必要があるでしょう。 + +### ISP ファームウェア + +Teensy と Pro Micro のコントローラを ISP プログラマとして使用するには、コントローラに ISP ファームウェアを書き込む必要があります。 +それ以外のハードウェアは、あらかじめプログラムされているはずです。 +そのため、これらのコントローラの場合は、正しい hex ファイルをダウンロードしてから書き込んでください。 + +* Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`) +* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_micro_ISP_B6_10.hex) (`10/B6`) + +コントローラに書き込んだら、この hex ファイルはもう必要ありません。 + +## 必要なソフトウェア + +QMK ツールボックスは、このほとんど（すべて）に使用することができます。 + +ただし、Teensy 2.0 ボードを使っている場合は、[Teensy Loader](https:/www.pjrc.comteensyloader.html) を使えば、Teensy 2.0 ボードに書き込むことができます。 +あるいは、`avrdude` (`qmk_install.sh` の一部としてインストールされています) や、[AVRDUDESS](https:/blog.zakkemble.netavrdudess-a-gui-for-avrdude)(Windows 用) を使って、Pro Micro に書き込んだり、ISP を書き込んだりすることができます。 + +## 配線 + +これは非常に簡単です。次のようにして、相互に対応するものを接続します。 + +### SparkFun Pocket AVR + + PocketAVR RST <-> Keyboard RESET + PocketAVR SCLK <-> Keyboard B1 (SCLK) + PocketAVR MOSI <-> Keyboard B2 (MOSI) + PocketAVR MISO <-> Keyboard B3 (MISO) + PocketAVR VCC <-> Keyboard VCC + PocketAVR GND <-> Keyboard GND + +### Teensy 2.0 + + Teensy B0 <-> Keyboard RESET + Teensy B1 <-> Keyboard B1 (SCLK) + Teensy B2 <-> Keyboard B2 (MOSI) + Teensy B3 <-> Keyboard B3 (MISO) + Teensy VCC <-> Keyboard VCC + Teensy GND <-> Keyboard GND + +!> Teensy の B0 ピンはキーボードのコントローラの RESET/RST ピンと配線されています。 Teensy の RESET ピンをキーボードの RESET に配線しないでください。 + +### Pro Micro + + Pro Micro 10 (B6) <-> Keyboard RESET + Pro Micro 15 (B1) <-> Keyboard B1 (SCLK) + Pro Micro 16 (B2) <-> Keyboard B2 (MOSI) + Pro Micro 14 (B3) <-> Keyboard B3 (MISO) + Pro Micro VCC <-> Keyboard VCC + Pro Micro GND <-> Keyboard GND + +!> Pro Micro の 10/B6 ピンはキーボードのコントローラの RESET/RST ピンに配線されています。 Pro Micro の RESET ピンをキーボードの RESET に配線 ***しないでください***。 + +## キーボードへの書き込み + +ISP プログラマをセットアップして、キーボードに接続したら、キーボードに書き込みをします。 + +### ブートローダファイル + +普通の状態に戻す一番簡単で手っ取り早い方法は、キーボードにブートローダだけ書き込むことです。 +これが終れば、普通にキーボードを接続して、普通にキーボードに書き込みできるようになります。 + +標準のブートローダは[`util/` フォルダー](https://github.com/qmk/qmk_firmware/tree/master/util) にあります。 +チップの正しいブートローダを書き込んでください: + +* **Atmel DFU** + * [ATmega16U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega16u4_1.0.1.hex) + * [ATmega32U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1.0.0.hex) + * [AT90USB64](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb64_1.0.0.hex) + * [AT90USB128](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128_1.0.1.hex) +* **Caterina** + * [Pro Micro (5V/16MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex) + * [Pro Micro (3.3V/8MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro8.hex) +* **BootloadHID (PS2AVRGB)** + * [ATmega32A](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_ps2avrgb_bootloadhid_1.0.1.hex) + +お使いのボードが何を使っているかわからない場合は、QMK のキーボード用の `rules.mk` ファイルを見てください。 +`MCU` と `BOOTLOADER` の行には必要な値が書かれています。これはボードのバージョンによって異なるかもしれません。 + +### 製造手法 + +ブートローダと通常のファームウェアを同時に書き込みたい場合、2つの方法があります。 +手動で行うか、コンパイル時に `:production` ターゲットを使って行うかです。 + +手動で行うには: + +1. オリジナルのファームウェアの .hex ファイルをテキストエディタで開きます +2. 最後の行を削除してください。(`:00000001FF`になっているはずです - これは EOF メッセージです) +3. ブートローダの内容全体を新しい行にコピーして(行間に空行を入れないように)、元のファイルの最後に貼り付けてください。 +4. これを新しいファイルとして `<keyboard>_<keymap>_production.hex` という名前で保存します。 + +?> ここでは他のブートローダも同じように使うことができますが、__ブートローダが必要で__、そうしないとまた ISP を使ってキーボードに新しいファームウェアを書き込まなければならなくなります。 + +#### QMK DFU ブートローダとプロダクションイメージの作成 + +コンパイル時に `:production` ターゲットを使用して、ボード用のファームウェア、QMK DFU ブートローダ、プロダクションファームウェアイメージを作成することができます。 +これが完了すると、3つのファイルが表示されます: + +* `<keyboard>_<keymap>.hex` +* `<keyboard>_<keymap>_bootloader.hex` +* `<keyboard>_<keymap>_production.hex` + +QMK DFU ブートローダは `atmega32u4` コントローラ (AVR ベースの Planck ボードや Pro Micro など) でしかテストされておらず、他のコントローラではテストされていません。 +しかし、`atmega32a` や `atmega328p` のような V-USB コントローラでは間違いなく動作しません。 + +ブートローダかプロダクションファームウェアファイルのどちらかを書き込むことができます。 +プロダクションファームウェアファイルの方が、より多くのデータを書き込むので、書き込みに時間がかかります。 + +?> 注意：同じブートローダを使用しつづけるべきです。すでに DFU を使用している場合は、QMK DFU に切り替えても問題ありません。しかし、例えば Pro Micro に QMK DFU を書き込むには、追加の手順が必要になります。 + +## ブートローダ/プロダクションファイルの書き込み + +キーボードがどのデバイスにも接続されていないことを確認し、ISP プログラマを接続してください。 + +ブートローダの種類を変更したい場合は、コマンドラインを使用する必要があります。 + +### QMK Toolbox + +1. 'AVRISP device connected' または `USB Tiny device connected` が黄色で表示されます。 +2. `Open` ダイアログで正しいブートローダー/プロダクションの .hex ファイルを選択します（パスにスペースを含めることはできません） +3. 書きこもうとしているキーボード（ISP プログラマではなく）のための正しい `Microcontroller` オプションが選択されていることを確認してください。 +4. `Flash` を押します +5. 特にプロダクションファイルの場合、しばらくは何も出力されませんが、待ちましょう。 + +検証とヒューズのチェックに問題がなければ、完了です。 +ボードが自動的に再起動する場合があります。 +それ以外の場合は、Teensy のプラグを抜いて、キーボードを接続します。 +テスト中は、Teensy をキーボードに接続したままにすることができますが、すべてが正常に機能することを確認したら、はんだを外すか、配線を外すことをお勧めします。 + +### コマンドライン + +ターミナル（Windows の場合は `cmd`）を開いて、修正した .hex ファイルがある場所に移動します。 +ここでは、このファイルを `main.hex` と呼び、Teensy 2.0 が `COM3` ポートに接続されていると仮定します。 +よくわからない場合は、デバイスマネージャを開いて、`Ports > USB Serial Device` を探してください。ここにある COM ポートを使ってください。 +あなたはそれが正しいポートであることを確認することができます： + + avrdude -c avrisp -P COM3 -p atmega32u4 + +次のような出力が得られるはずです: + + avrdude: AVR device initialized and ready to accept instructions + + Reading | ################################################## | 100% 0.02s + + avrdude: Device signature = 0x1e9587 + + avrdude: safemode: Fuses OK + + avrdude done. Thank you. + +私たちのキーボードは `atmega32u4`（共通）を使用しているので、これが指定するチップです。 +以下が完全なコマンドです： + + avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i + +ボードが `atmega32a`（jj40 など）を使用している場合、コマンドは次のとおりです（最後の追加コードによりヒューズが正しく設定されます）。 + + avrdude -c avrisp -P COM3 -p atmega32 -U flash:w:main.hex:i -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m + +プログレスバーが表示されてから、以下が表示されるはずです。 + + avrdude: verifying ... + avrdude: 32768 bytes of flash verified + + avrdude: safemode: Fuses OK + + avrdude done. Thank you. + +これは全てうまく動作したことを示しています。 +ボードが自動的に再起動する場合もありますが、そうでない場合は、Teensy のプラグを抜いてキーボードを接続してください。 +テスト中は、Teensy をキーボードに接続したままにすることができますが、すべてが正常に機能することを確認したら、はんだを外すか、配線を外すことをお勧めします。 + +SparkFun PocketAVR Programmer や、他の USB Tiny ベースの ISP プログラマを使用している場合は、次のようなものを使用すると良いでしょう。 + + avrdude -c usbtiny -P usb -p atmega32u4 + +#### 上級者向け: ヒューズの変更 + +Pro Micro に QMK DFU を書き込むなど、ブートローダを切り替える場合は、ブートローダの hex ファイルの書き込みに加えて、ヒューズを変更する必要があります。 +これは、`caterina` (Pro Micro ブートローダ) と `dfu` では起動ルーチンの扱いが異なり、その動作はヒューズによって制御されるからです。 + +!> これは、ヒューズを変更することは、永久にあなたのコントローラをレンガ化(訳注:日本では文鎮化と呼ぶことが多い、コントローラがまったく無反応になる状態)することができる方法の1つであるため、それは非常に注意が必要な1つの領域です。 + +以下は、`atmega32u4`の 5V 16MHz 版（5V Pro Micro など）を想定しています。 + +`atmega32u4`の DFU の場合、必要なヒューズ設定は次のとおりです: + +| ヒューズ | 設定 | +|----------|------------------| +| Low | `0x5E` | +| High | `0xD9` or `0x99` | +| Extended | `0xC3` | + +High ヒューズは 0xD9 か 0x99 のどちらかになります。 +違いは、0xD9 は QMK Firmware がソフトウェアでも無効化している JTAG を無効化しているのに対し、0x99 は JTAG を無効化していないことです。 + +これを設定するには、`-U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m` をコマンドに追加します。 +そうすると、最終的なコマンドは次のようになります。 + + avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m + +`atmega32u4`の Caterina では、以下があなたに必要なヒューズの設定です。 + +| ヒューズ | 設定 | +|----------|--------| +| Low | `0xFF` | +| High | `0xD8` | +| Extended | `0xCB` | + +これを設定するには、コマンドに `-U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m` を追加します。 +これで、最終的なコマンドは次のようになるはずです。 + + avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m + + +別のコントローラーを使用している場合や、別の設定を希望する場合は、この[AVR ヒューズ計算機](http:/www.engbedded.comfusecalc)を使用して、より適切な値を見つけることができます。 + +## ヘルプ + +ご質問・ご不明な点がありましたら、お気軽に[issue を開いてください](https://github.com/qmk/qmk_firmware/issues/new)！ diff --git a/docs/ja/ref_functions.md b/docs/ja/ref_functions.md index e9c45fdec..029797ff0 100644 --- a/docs/ja/ref_functions.md +++ b/docs/ja/ref_functions.md @@ -1,8 +1,8 @@ # キーボードをより良くするための便利なコア関数のリスト <!--- - original document: 0.9.47:docs/ref_functions.md - git diff 0.9.47 HEAD -- docs/ref_functions.md | cat + original document: 0.10.33:docs/ref_functions.md + git diff 0.10.33 HEAD -- docs/ref_functions.md | cat --> QMK には、信じられないほど便利な、またはあなたが望んでいた機能を少し追加する、隠された関数がたくさんあります。特定の機能に固有の関数はそれぞれの機能のページにあるため、ここには含まれていません。 @@ -48,7 +48,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { ### `update_tri_layer_state(state, x, y, z)` もう1つの関数は `update_tri_layer_state(state, x, y, z)` です。この関数は [`layer_state_set_*` 関数](ja/custom_quantum_functions.md#layer-change-code)から呼び出されることを意図しています。これは、キーコードを使ってレイヤーを変更するたびに、これがチェックされることを意味します。したがって、`LT(layer, kc)` を使ってレイヤーを変更すると、同じレイヤーチェックが引き起こされます。 -このメソッドの注意点は、`x` および `y` レイヤーをオンにしないと、`z` レイヤーにアクセスできないことです。レイヤー `z` のみをアクティブにしようとすると、このコードが実行され、使用前にレイヤー `z` がオフになるからです。 +このメソッドの注意点は2つあります: +1. `x` および `y` レイヤーをオンにしないと、`z` レイヤーにアクセスできません。これは、レイヤー `z` のみをアクティブにしようとすると、このコードが実行され、使用前にレイヤー `z` がオフになるからです。 +2. レイヤーは最上位の番号から処理されるので、`z` は `x` や `y` よりも上位のレイヤーでなければなりません。そうでなければアクセスできない場合があります。 #### 例 diff --git a/docs/ja/reference_info_json.md b/docs/ja/reference_info_json.md index 0fa1f9d3f..f5889a102 100644 --- a/docs/ja/reference_info_json.md +++ b/docs/ja/reference_info_json.md @@ -1,8 +1,8 @@ # `info.json` <!--- - original document: 0.9.46:docs/reference_info_json.md - git diff 0.9.46 HEAD -- docs/reference_info_json.md | cat + original document: 0.10.33:docs/reference_info_json.md + git diff 0.10.33 HEAD -- docs/reference_info_json.md | cat --> このファイルは [QMK API](https://github.com/qmk/qmk_api) によって使われます。このファイルは [QMK Configurator](https://config.qmk.fm/) がキーボードの画像を表示するために必要な情報を含んでいます。ここにメタデータを設定することもできます。 diff --git a/keyboards/aeboards/ext65/rev2/bootloader_defs.h b/keyboards/aeboards/ext65/rev2/bootloader_defs.h deleted file mode 100644 index 02c48c4e6..000000000 --- a/keyboards/aeboards/ext65/rev2/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/ai03/vega/bootloader_defs.h b/keyboards/ai03/vega/bootloader_defs.h deleted file mode 100644 index 02c48c4e6..000000000 --- a/keyboards/ai03/vega/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/an_c/bootloader_defs.h b/keyboards/cannonkeys/an_c/bootloader_defs.h deleted file mode 100644 index 02c48c4e6..000000000 --- a/keyboards/cannonkeys/an_c/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/chimera65/bootloader_defs.h b/keyboards/cannonkeys/chimera65/bootloader_defs.h deleted file mode 100644 index 02c48c4e6..000000000 --- a/keyboards/cannonkeys/chimera65/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/instant60/bootloader_defs.h b/keyboards/cannonkeys/instant60/bootloader_defs.h deleted file mode 100644 index 02c48c4e6..000000000 --- a/keyboards/cannonkeys/instant60/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/iron165/bootloader_defs.h b/keyboards/cannonkeys/iron165/bootloader_defs.h deleted file mode 100644 index 02c48c4e6..000000000 --- a/keyboards/cannonkeys/iron165/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/ortho48/bootloader_defs.h b/keyboards/cannonkeys/ortho48/bootloader_defs.h deleted file mode 100644 index 6b8fa9f72..000000000 --- a/keyboards/cannonkeys/ortho48/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/cannonkeys/ortho48/rules.mk b/keyboards/cannonkeys/ortho48/rules.mk index 5e18d91ca..6e468c49a 100644 --- a/keyboards/cannonkeys/ortho48/rules.mk +++ b/keyboards/cannonkeys/ortho48/rules.mk @@ -1,12 +1,8 @@ # MCU name MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO - -DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# Bootloader selection +BOOTLOADER = stm32duino # project specific files VPATH += keyboards/cannonkeys/bluepill diff --git a/keyboards/cannonkeys/ortho60/bootloader_defs.h b/keyboards/cannonkeys/ortho60/bootloader_defs.h deleted file mode 100644 index 6b8fa9f72..000000000 --- a/keyboards/cannonkeys/ortho60/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/cannonkeys/ortho60/rules.mk b/keyboards/cannonkeys/ortho60/rules.mk index 80b31a12f..ea9bd6b2d 100644 --- a/keyboards/cannonkeys/ortho60/rules.mk +++ b/keyboards/cannonkeys/ortho60/rules.mk @@ -1,12 +1,8 @@ # MCU name MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO - -DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# Bootloader selection +BOOTLOADER = stm32duino # project specific files VPATH += keyboards/cannonkeys/bluepill diff --git a/keyboards/cannonkeys/ortho75/bootloader_defs.h b/keyboards/cannonkeys/ortho75/bootloader_defs.h deleted file mode 100644 index 6b8fa9f72..000000000 --- a/keyboards/cannonkeys/ortho75/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/cannonkeys/ortho75/rules.mk b/keyboards/cannonkeys/ortho75/rules.mk index ae196fd85..e132ccaf1 100644 --- a/keyboards/cannonkeys/ortho75/rules.mk +++ b/keyboards/cannonkeys/ortho75/rules.mk @@ -1,12 +1,8 @@ # MCU name MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO - -DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# Bootloader selection +BOOTLOADER = stm32duino # project specific files VPATH += keyboards/cannonkeys/bluepill diff --git a/keyboards/cannonkeys/practice60/bootloader_defs.h b/keyboards/cannonkeys/practice60/bootloader_defs.h deleted file mode 100644 index 6b8fa9f72..000000000 --- a/keyboards/cannonkeys/practice60/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/cannonkeys/practice60/rules.mk b/keyboards/cannonkeys/practice60/rules.mk index 3713b6078..3f9ca1448 100644 --- a/keyboards/cannonkeys/practice60/rules.mk +++ b/keyboards/cannonkeys/practice60/rules.mk @@ -1,12 +1,8 @@ # MCU name MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO - -DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# Bootloader selection +BOOTLOADER = stm32duino # project specific files VPATH += keyboards/cannonkeys/bluepill diff --git a/keyboards/cannonkeys/practice65/bootloader_defs.h b/keyboards/cannonkeys/practice65/bootloader_defs.h deleted file mode 100644 index 6b8fa9f72..000000000 --- a/keyboards/cannonkeys/practice65/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/cannonkeys/practice65/rules.mk b/keyboards/cannonkeys/practice65/rules.mk index 5fd4892dc..344844b0e 100644 --- a/keyboards/cannonkeys/practice65/rules.mk +++ b/keyboards/cannonkeys/practice65/rules.mk @@ -1,12 +1,8 @@ # MCU name MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO - -DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# Bootloader selection +BOOTLOADER = stm32duino # project specific files VPATH += keyboards/cannonkeys/bluepill diff --git a/keyboards/cannonkeys/savage65/bootloader_defs.h b/keyboards/cannonkeys/savage65/bootloader_defs.h deleted file mode 100644 index 02c48c4e6..000000000 --- a/keyboards/cannonkeys/savage65/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/tmov2/bootloader_defs.h b/keyboards/cannonkeys/tmov2/bootloader_defs.h deleted file mode 100644 index 02c48c4e6..000000000 --- a/keyboards/cannonkeys/tmov2/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/converter/siemens_tastatur/bootloader_defs.h b/keyboards/converter/siemens_tastatur/bootloader_defs.h deleted file mode 100644 index 6b8fa9f72..000000000 --- a/keyboards/converter/siemens_tastatur/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/converter/siemens_tastatur/rules.mk b/keyboards/converter/siemens_tastatur/rules.mk index 03e6b0f49..451d07e67 100644 --- a/keyboards/converter/siemens_tastatur/rules.mk +++ b/keyboards/converter/siemens_tastatur/rules.mk @@ -1,12 +1,8 @@ # MCU name MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO - -DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# Bootloader selection +BOOTLOADER = stm32duino SRC = matrix.c diff --git a/keyboards/emajesty/eiri/config.h b/keyboards/emajesty/eiri/config.h new file mode 100644 index 000000000..ea7afa482 --- /dev/null +++ b/keyboards/emajesty/eiri/config.h @@ -0,0 +1,96 @@ +/* +Copyright 2020 EMajesty + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x9372 +#define DEVICE_VER 0x0001 +#define MANUFACTURER EMajesty +#define PRODUCT eiri + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B4, B5, B2, B6 } +#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B3, B1, F7, F6, F5, F4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/emajesty/eiri/eiri.c b/keyboards/emajesty/eiri/eiri.c new file mode 100644 index 000000000..161fc9a96 --- /dev/null +++ b/keyboards/emajesty/eiri/eiri.c @@ -0,0 +1,17 @@ +/* Copyright 2020 EMajesty + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "eiri.h" diff --git a/keyboards/emajesty/eiri/eiri.h b/keyboards/emajesty/eiri/eiri.h new file mode 100644 index 000000000..da06287cf --- /dev/null +++ b/keyboards/emajesty/eiri/eiri.h @@ -0,0 +1,40 @@ +/* Copyright 2020 EMajesty + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, \ + K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, \ + K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, \ + K36, K37, K38, K39, K40, K41, K42, K43, K44, K45 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11 }, \ + { K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 }, \ + { K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35 }, \ + { KC_NO, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, KC_NO } \ +} + diff --git a/keyboards/emajesty/eiri/info.json b/keyboards/emajesty/eiri/info.json new file mode 100644 index 000000000..7b8ae5927 --- /dev/null +++ b/keyboards/emajesty/eiri/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "eiri", + "url": "https://github.com/EMajesty/eiri", + "maintainer": "EMajesty", + "width": 15, + "height": 4.5, + "layouts": { + "LAYOUT": { + "layout": [{"x":3, "y":0}, {"x":11, "y":0}, {"x":2, "y":0.25}, {"x":4, "y":0.25}, {"x":10, "y":0.25}, {"x":12, "y":0.25}, {"x":1, "y":0.5}, {"x":5, "y":0.5}, {"x":9, "y":0.5}, {"x":13, "y":0.5}, {"x":0, "y":0.75}, {"x":14, "y":0.75}, {"x":3, "y":1}, {"x":11, "y":1}, {"x":2, "y":1.25}, {"x":4, "y":1.25}, {"x":10, "y":1.25}, {"x":12, "y":1.25}, {"x":1, "y":1.5}, {"x":5, "y":1.5}, {"x":9, "y":1.5}, {"x":13, "y":1.5}, {"x":0, "y":1.75}, {"x":14, "y":1.75}, {"x":3, "y":2}, {"x":11, "y":2}, {"x":2, "y":2.25}, {"x":4, "y":2.25}, {"x":10, "y":2.25}, {"x":12, "y":2.25}, {"x":1, "y":2.5}, {"x":5, "y":2.5}, {"x":9, "y":2.5}, {"x":13, "y":2.5}, {"x":0, "y":2.75}, {"x":14, "y":2.75}, {"x":3, "y":3}, {"x":11, "y":3}, {"x":2, "y":3.25}, {"x":4, "y":3.25}, {"x":10, "y":3.25}, {"x":12, "y":3.25}, {"x":5, "y":3.5}, {"x":6, "y":3.5}, {"x":8, "y":3.5}, {"x":9, "y":3.5}] + } + } +} diff --git a/keyboards/emajesty/eiri/keymaps/default/keymap.c b/keyboards/emajesty/eiri/keymaps/default/keymap.c new file mode 100644 index 000000000..e52a83c81 --- /dev/null +++ b/keyboards/emajesty/eiri/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2020 EMajesty + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LGUI, KC_LALT, KC_SPC, KC_DEL, MO(1), MO(2), KC_ENT, KC_BSPC, KC_RALT, KC_RGUI), + [1] = LAYOUT( + KC_ESC, _______, KC_UP, _______, KC_HOME, KC_PGUP, _______, _______, _______, KC_LPRN, KC_RPRN, KC_GRV, + _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_PGDN, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, + _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, KC_LCBR, KC_RCBR, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + [2] = LAYOUT( + RESET, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______) +}; diff --git a/keyboards/emajesty/eiri/keymaps/default/readme.md b/keyboards/emajesty/eiri/keymaps/default/readme.md new file mode 100644 index 000000000..f4b3c66d0 --- /dev/null +++ b/keyboards/emajesty/eiri/keymaps/default/readme.md @@ -0,0 +1,3 @@ + + +# The default keymap for eiri diff --git a/keyboards/emajesty/eiri/readme.md b/keyboards/emajesty/eiri/readme.md new file mode 100644 index 000000000..725eb3109 --- /dev/null +++ b/keyboards/emajesty/eiri/readme.md @@ -0,0 +1,19 @@ +# eiri + + + +An Atreus-inspired 40% keyboard with 6 columns + +* Keyboard Maintainer: [EMajesty](https://github.com/EMajesty) +* Hardware Supported: eiri pcb +* Hardware Availability: [Project is open source](https://github.com/EMajesty/eiri) + +Make example for this keyboard (after setting up your build environment): + + make emajesty/eiri:default + +Flashing example for this keyboard: + + make emajesty/eiri:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/emajesty/eiri/rules.mk b/keyboards/emajesty/eiri/rules.mk new file mode 100644 index 000000000..fd76a5247 --- /dev/null +++ b/keyboards/emajesty/eiri/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h index eb0f2066d..bc63f6108 100644 --- a/keyboards/ergodox_ez/config.h +++ b/keyboards/ergodox_ez/config.h @@ -1,6 +1,8 @@ /* Copyright 2012 Jun Wako <wakojun@gmail.com> Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -21,10 +23,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1307 +#define VENDOR_ID 0x3297 #define DEVICE_VER 0x0001 -#define MANUFACTURER ZSA Technology Labs Inc +#define MANUFACTURER ZSA Technology Labs +#define PRODUCT_ID 0x4974 #define PRODUCT ErgoDox EZ /* key matrix size */ @@ -115,7 +117,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * manufacturer specs. */ -#define USB_MAX_POWER_CONSUMPTION 500 // RGB backlight #define DRIVER_ADDR_1 0b1110100 @@ -154,6 +155,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION //#define DEBUG_MATRIX_SCAN_RATE diff --git a/keyboards/ergodox_ez/ergodox_ez.c b/keyboards/ergodox_ez/ergodox_ez.c index 6c0b74ec4..e6f48c49f 100644 --- a/keyboards/ergodox_ez/ergodox_ez.c +++ b/keyboards/ergodox_ez/ergodox_ez.c @@ -1,3 +1,23 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #include "ergodox_ez.h" extern inline void ergodox_board_led_on(void); diff --git a/keyboards/ergodox_ez/ergodox_ez.h b/keyboards/ergodox_ez/ergodox_ez.h index a8b02a96b..7bb271714 100644 --- a/keyboards/ergodox_ez/ergodox_ez.h +++ b/keyboards/ergodox_ez/ergodox_ez.h @@ -1,3 +1,23 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #pragma once #include "quantum.h" @@ -5,6 +25,12 @@ #include <stdbool.h> #include "i2c_master.h" +#if defined(KEYBOARD_ergodox_ez_glow) +# include "glow.h" +#elif defined(KEYBOARD_ergodox_ez_shine) +# include "shine.h" +#endif + // I2C aliases and register addresses (see "mcp23018.md") #define I2C_ADDR 0b0100000 #define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE ) diff --git a/keyboards/ergodox_ez/glow/config.h b/keyboards/ergodox_ez/glow/config.h new file mode 100644 index 000000000..674b7bffb --- /dev/null +++ b/keyboards/ergodox_ez/glow/config.h @@ -0,0 +1,26 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#undef PRODUCT_ID +#define PRODUCT_ID 0x4976 +#undef PRODUCT +#define PRODUCT ErgoDox EZ Glow diff --git a/keyboards/ergodox_ez/glow/glow.h b/keyboards/ergodox_ez/glow/glow.h new file mode 100644 index 000000000..da7a6073e --- /dev/null +++ b/keyboards/ergodox_ez/glow/glow.h @@ -0,0 +1,23 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "ergodox_ez.h" diff --git a/keyboards/ergodox_ez/glow/rules.mk b/keyboards/ergodox_ez/glow/rules.mk new file mode 100644 index 000000000..aad92997d --- /dev/null +++ b/keyboards/ergodox_ez/glow/rules.mk @@ -0,0 +1 @@ +RGB_MATRIX_ENABLE = yes diff --git a/keyboards/ergodox_ez/led_i2c.c b/keyboards/ergodox_ez/led_i2c.c index f5553a8b6..fe40ab797 100644 --- a/keyboards/ergodox_ez/led_i2c.c +++ b/keyboards/ergodox_ez/led_i2c.c @@ -1,31 +1,27 @@ /* - * light weight WS2812 lib V2.0b - * - * Controls WS2811/WS2812/WS2812B RGB-LEDs - * Author: Tim (cpldcpu@gmail.com) - * - * Jan 18th, 2014 v2.0b Initial Version - * Nov 29th, 2015 v2.3 Added SK6812RGBW support - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #ifdef RGBLIGHT_ENABLE # include "ergodox_ez.h" -extern rgblight_config_t rgblight_config; - void rgblight_call_driver(LED_TYPE *led, uint8_t led_num) { i2c_init(); i2c_start(0x84, ERGODOX_EZ_I2C_TIMEOUT); diff --git a/keyboards/ergodox_ez/matrix.c b/keyboards/ergodox_ez/matrix.c index cfa76c1c3..685ce5009 100644 --- a/keyboards/ergodox_ez/matrix.c +++ b/keyboards/ergodox_ez/matrix.c @@ -1,7 +1,8 @@ /* - - +Copyright 2012 Jun Wako <wakojun@gmail.com> Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -17,6 +18,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ + /* * scan matrix */ diff --git a/keyboards/ergodox_ez/post_config.h b/keyboards/ergodox_ez/post_config.h index 526cc8c41..0d4fe5c68 100644 --- a/keyboards/ergodox_ez/post_config.h +++ b/keyboards/ergodox_ez/post_config.h @@ -1,3 +1,23 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #pragma once #if !defined(ERGODOX_LED_15) && !defined(ERGODOX_LED_30) diff --git a/keyboards/ergodox_ez/readme.md b/keyboards/ergodox_ez/readme.md index 796e96ce5..59a2840fd 100644 --- a/keyboards/ergodox_ez/readme.md +++ b/keyboards/ergodox_ez/readme.md @@ -11,6 +11,11 @@ The ErgoDox EZ is a mass produced version of the original ErgoDox keyboard, with Make example for this keyboard (after setting up your build environment): make ergodox_ez:default:flash + +For the ErgoDox EZ Shine, and Glow, use one of the following: + + make ergodox_ez/shine:default:flash + make ergodox_ez/glow:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ergodox_ez/rules.mk b/keyboards/ergodox_ez/rules.mk index 9ad4eaa18..b6311aca3 100644 --- a/keyboards/ergodox_ez/rules.mk +++ b/keyboards/ergodox_ez/rules.mk @@ -30,7 +30,6 @@ UNICODE_ENABLE = yes # Unicode SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard SLEEP_LED_ENABLE = no API_SYSEX_ENABLE = no -RGBLIGHT_ENABLE = yes RGB_MATRIX_ENABLE = no # enable later DEBOUNCE_TYPE = eager_pr diff --git a/keyboards/ergodox_ez/shine/config.h b/keyboards/ergodox_ez/shine/config.h new file mode 100644 index 000000000..cf4f59f3b --- /dev/null +++ b/keyboards/ergodox_ez/shine/config.h @@ -0,0 +1,26 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#undef PRODUCT_ID +#define PRODUCT_ID 0x4975 +#undef PRODUCT +#define PRODUCT ErgoDox EZ Shine diff --git a/keyboards/ergodox_ez/shine/rules.mk b/keyboards/ergodox_ez/shine/rules.mk new file mode 100644 index 000000000..1e3cebb14 --- /dev/null +++ b/keyboards/ergodox_ez/shine/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes diff --git a/keyboards/ergodox_ez/shine/shine.h b/keyboards/ergodox_ez/shine/shine.h new file mode 100644 index 000000000..da7a6073e --- /dev/null +++ b/keyboards/ergodox_ez/shine/shine.h @@ -0,0 +1,23 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> +Copyright 2015 ZSA Technology Labs Inc (@zsa) +Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "ergodox_ez.h" diff --git a/keyboards/ergodox_infinity/matrix.c b/keyboards/ergodox_infinity/matrix.c index 3a0a17928..941367a36 100644 --- a/keyboards/ergodox_infinity/matrix.c +++ b/keyboards/ergodox_infinity/matrix.c @@ -24,6 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "print.h" #include "debug.h" #include "matrix.h" +#include "eeconfig.h" #include "serial_link/system/serial_link.h" @@ -118,8 +119,12 @@ uint8_t matrix_scan(void) } uint8_t offset = 0; -#ifdef MASTER_IS_ON_RIGHT +#if (defined(EE_HANDS) || defined(MASTER_IS_ON_RIGHT)) +#ifdef EE_HANDS + if (is_serial_link_master() && !eeconfig_read_handedness()) { +#else if (is_serial_link_master()) { +#endif offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS; } #endif @@ -162,7 +167,13 @@ void matrix_print(void) void matrix_set_remote(matrix_row_t* rows, uint8_t index) { uint8_t offset = 0; -#ifdef MASTER_IS_ON_RIGHT +#ifdef EE_HANDS + if (eeconfig_read_handedness()) { + offset = LOCAL_MATRIX_ROWS * (index + 1); + } else { + offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS * (index + 2); + } +#elif defined(MASTER_IS_ON_RIGHT) offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS * (index + 2); #else offset = LOCAL_MATRIX_ROWS * (index + 1); diff --git a/keyboards/ergodox_infinity/readme.md b/keyboards/ergodox_infinity/readme.md index d712bb880..73ee3bc1d 100644 --- a/keyboards/ergodox_infinity/readme.md +++ b/keyboards/ergodox_infinity/readme.md @@ -29,6 +29,9 @@ Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob The Infinity is two completely independent keyboards, that can connect together. You have a few options in how you flash the firmware: +- Add `#define EE_HANDS` to your config.h, initialize the EEPROM values (see below), + and then flash the same firmware to both halves. + - Flash the left half, rebuild the firmware with "MASTER=right" and then flash the right half. This allows you to plug in either half directly to the computer and is what the above instructions do. @@ -43,6 +46,35 @@ You have a few options in how you flash the firmware: directly connect the right half to the computer. - For minor changes such as changing only the keymap without having updated - any part of the firmware code itself, you can program only the MASTER half. + any part of the firmware code itself, you can program only the MASTER half, + but it is safest to program both halves. + +### EE_HANDS initialization + +To initialize the EEPROM values for `EE_HANDS` to work properly, these steps should work. +They only need to be done once, unless you reset the EEPROM later. + + - Plug in the left keyboard half to the computer, and press its program button. + + - Flash the left half with `make ergodox_infinity:default:dfu-util-split-left` + (If you need to use a different method to flash your keyboard, still run this command, + and abort it with Ctrl+C when the flashing attempts starts to print errors, + then flash the built firmware). + + - On the left half, press the top vertical 1.5U key (second from the top in the rightmost column) once, + then the 1U key at the bottom in the opposite corner (bottom left corner). + + - Plug in the right keyboard half to the computer, and press its program button. + + - Flash the right half with `make ergodox_infinity:default:dfu-util-split-right` + + - On the right half, press the top vertical 1.5U key (second from the top in the leftmost column) once, + then the 1U key at the bottom in the opposite corner (bottom right corner). + + - Add `#define EE_HANDS` to the config.h file of your keymap, and build your firmware using + `make ergodox_infinity:keymapname`. + + - After this, you can flash both halves with the same firmware, _without_ having to rebuild with + "MASTER=right" or risking a mirrored keyboard when connected the wrong way. + If you reset your EEPROM later, you'll have to follow these steps again, though. -- It is safest to program both halves though. diff --git a/keyboards/eve/meteor/readme.md b/keyboards/eve/meteor/readme.md index 28884156e..69d5a35ec 100644 --- a/keyboards/eve/meteor/readme.md +++ b/keyboards/eve/meteor/readme.md @@ -16,6 +16,8 @@ Flashing example for this keyboard ([after setting up the bootloadHID flashing e **Reset Key:** Short the two holes labeled `FW_JP` underneath the PCB, beside the Tab key while plugging in the keyboard. -Do not confuse this with the LED holes of the switch in the `Tab` position. `FW_JP` is not reachable from the top as the plate blocks access to it. +Do not confuse this with the LED holes of the switch in the `Tab` position. `FW_JP` is not reachable from the top as the plate blocks access to it. + +If your PCB does not have this circuit exposed, you must hold down the key corresponding to pins A0 and B0 on the MCU. On at least the red EVE PCB, this is the **+/= key** (second row, 13th column). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/leftynumpad/config.h b/keyboards/handwired/leftynumpad/config.h new file mode 100644 index 000000000..9059bfe76 --- /dev/null +++ b/keyboards/handwired/leftynumpad/config.h @@ -0,0 +1,102 @@ +/* +Copyright 2020 Tom Swartz + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xBEEF +#define DEVICE_VER 0x0001 +#define MANUFACTURER Tom Swartz +#define PRODUCT LeftyNumpad +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 5 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 } +#define MATRIX_COL_PINS { E6, B4, B5, B6, B2 } +#define UNUSED_PINS {D3, D2, B0, D5, B3, B1, F7, F6, F5, F4 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 10 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/handwired/leftynumpad/info.json b/keyboards/handwired/leftynumpad/info.json new file mode 100644 index 000000000..9dab76430 --- /dev/null +++ b/keyboards/handwired/leftynumpad/info.json @@ -0,0 +1,36 @@ +{ + "keyboard_name": "LeftyNumpad", + "url": "https://github.com/tomswartz07", + "maintainer": "Tom Swartz", + "width": 5, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"0,0", "x":0, "y":0}, + {"label":"1,0", "x":1, "y":0}, + {"label":"2,0", "x":2, "y":0}, + {"label":"3,0", "x":3, "y":0}, + {"label":"4,0", "x":4, "y":0}, + {"label":"0,1", "x":0, "y":1}, + {"label":"1,1", "x":1, "y":1}, + {"label":"2,1", "x":2, "y":1}, + {"label":"3,1", "x":3, "y":1}, + {"label":"0,2", "x":0, "y":2}, + {"label":"1,2", "x":1, "y":2}, + {"label":"2,2", "x":2, "y":2}, + {"label":"3,2", "x":3, "y":2}, + {"label":"5,1", "x":4, "y":1, "h":2}, + {"label":"0,3", "x":0, "y":3}, + {"label":"1,3", "x":1, "y":3}, + {"label":"2,3", "x":2, "y":3}, + {"label":"3,3", "x":3, "y":3}, + {"label":"0,4", "x":0, "y":4}, + {"label":"1,4", "x":1, "y":4}, + {"label":"2,4", "x":2, "y":4}, + {"label":"3,4", "x":3, "y":4}, + {"label":"4,3", "x":4, "y":3, "h":2} + ] + } + } +} diff --git a/keyboards/handwired/leftynumpad/keymaps/default/keymap.c b/keyboards/handwired/leftynumpad/keymaps/default/keymap.c new file mode 100644 index 000000000..d75e42211 --- /dev/null +++ b/keyboards/handwired/leftynumpad/keymaps/default/keymap.c @@ -0,0 +1,92 @@ +/* Copyright 2020 Tom Swartz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _NP, + _FN +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + KC_00 = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* NumberPad Layer + ,---------------------------------------. + | Back | Num | / | * | - | + | Space | Lock | | | | + |-------+-------+-------+-------+-------| + | Tab | 7 | 8 | 9 | + | + | | Home | Up | PgUp | | + |-------+-------+-------+-------| | + | Layer | 4 | 5 | 6 | | + | Toggle| Left | | Right | | + |-------+-------+-------+-------+-------| + | Page | 1 | 2 | 3 | Enter | + | Up | End | Down | PgDn | | + |-------+-------+-------+-------| | + | Page | 00 | 0 | . | | + | Down | | | | | + `---------------------------------------' +*/ + [_NP] = LAYOUT( + KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_7, KC_8, KC_9, + TG(_NP), KC_4, KC_5, KC_6, KC_PPLS, + KC_PGUP, KC_1, KC_2, KC_3, + KC_PGDOWN, KC_00, KC_0, KC_PDOT, KC_PENT + ), +/* Macropad/Function Layer + ,---------------------------------------. + | `~ | Play | F13 | Prev | Next | + | | Pause | | | | + |-------+-------+-------+-------+-------| + | Tab | F14 | F15 | 9 | + | + | | | | PgUp | | + |-------+-------+-------+-------| | + | Layer | 4 | 5 | 6 | | + | Toggle| Left | | Right | | + |-------+-------+-------+-------+-------| + | U | B | 2 | 3 | Enter | + | | | Down | PgDn | | + |-------+-------+-------+-------| | + | D | F | 0 | . | | + | | | | | | + `---------------------------------------' +*/ + [_FN] = LAYOUT( + KC_GRV, KC_MPLY, KC_F13, KC_MPRV, KC_MNXT, + _______, KC_F14, KC_F15, _______, + _______, _______, _______, _______, _______, + KC_U, KC_B, _______, _______, + KC_D, KC_F, _______, _______, _______ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_00: + if (record->event.pressed) { + // when keycode DOUBLEZERO is pressed + SEND_STRING("00"); + } + break; + } + return true; +} diff --git a/keyboards/handwired/leftynumpad/keymaps/default/readme.md b/keyboards/handwired/leftynumpad/keymaps/default/readme.md new file mode 100644 index 000000000..107395ebb --- /dev/null +++ b/keyboards/handwired/leftynumpad/keymaps/default/readme.md @@ -0,0 +1,21 @@ +# The default keymap for LeftyNumpad + +## Base Layer +``` + ,---------------------------------------. + | Back | Num | / | * | - | + | Space | Lock | | | | + |-------+-------+-------+-------+-------| + | Layer | 7 | 8 | 9 | + | + | Up | Home | Up | PgUp | | + |-------+-------+-------+-------| | + | Layer | 4 | 5 | 6 | | + | Down | Left | | Right | | + |-------+-------+-------+-------+-------| + | Page | 1 | 2 | 3 | Enter | + | Up | End | Down | PgDn | | + |-------+-------+-------+-------| | + | Page | 00 | 0 | . | | + | Down | | | | | + `---------------------------------------' +``` diff --git a/keyboards/handwired/leftynumpad/leftynumpad.c b/keyboards/handwired/leftynumpad/leftynumpad.c new file mode 100644 index 000000000..195ec7828 --- /dev/null +++ b/keyboards/handwired/leftynumpad/leftynumpad.c @@ -0,0 +1,17 @@ +/* Copyright 2020 Tom Swartz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "leftynumpad.h" diff --git a/keyboards/handwired/leftynumpad/leftynumpad.h b/keyboards/handwired/leftynumpad/leftynumpad.h new file mode 100644 index 000000000..7f3ebb844 --- /dev/null +++ b/keyboards/handwired/leftynumpad/leftynumpad.h @@ -0,0 +1,42 @@ +/* Copyright 2020 Tom Swartz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K05, K15, K25, K35, K45, \ + K04, K14, K24, K34, \ + K03, K13, K23, K33, K43, \ + K02, K12, K22, K32, \ + K01, K11, K21, K31, K41 \ +) \ +{ \ + { K05, K15, K25, K35, K45 }, \ + { K04, K14, K24, K34 }, \ + { K03, K13, K23, K33, K43 }, \ + { K02, K12, K22, K32 }, \ + { K01, K11, K21, K31, K41 } \ +} diff --git a/keyboards/handwired/leftynumpad/readme.md b/keyboards/handwired/leftynumpad/readme.md new file mode 100644 index 000000000..4446bf296 --- /dev/null +++ b/keyboards/handwired/leftynumpad/readme.md @@ -0,0 +1,16 @@ +# LeftyNumpad + + + +A small numberpad/macropad intended to be placed southpaw-style on the left +side of a keyboard. + +* Keyboard Maintainer: [Tom Swartz](https://github.com/tomswartz07) +* Hardware Supported: Handwired, Uses Arudino Micro. +* Hardware Availability: Handwired hardware. + +Make example for this keyboard (after setting up your build environment): + + make handwired/leftynumpad:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/leftynumpad/rules.mk b/keyboards/handwired/leftynumpad/rules.mk new file mode 100644 index 000000000..5c0d8f307 --- /dev/null +++ b/keyboards/handwired/leftynumpad/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/onekey/bluepill/bootloader_defs.h b/keyboards/handwired/onekey/bluepill/bootloader_defs.h deleted file mode 100644 index 6b8fa9f72..000000000 --- a/keyboards/handwired/onekey/bluepill/bootloader_defs.h +++ /dev/null @@ -1,10 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/handwired/onekey/bluepill/rules.mk b/keyboards/handwired/onekey/bluepill/rules.mk index 66ce51744..019b1130d 100644 --- a/keyboards/handwired/onekey/bluepill/rules.mk +++ b/keyboards/handwired/onekey/bluepill/rules.mk @@ -1,13 +1,8 @@ # MCU name MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO - -DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1eaf -p 0003 - +# Bootloader selection +BOOTLOADER = stm32duino # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/onekey/keymaps/pytest_nocpp/keymap.c b/keyboards/handwired/onekey/keymaps/pytest_nocpp/keymap.c new file mode 100644 index 000000000..4e06bb11e --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/pytest_nocpp/keymap.c @@ -0,0 +1,23 @@ +#include QMK_KEYBOARD_H +#include "audio.h" + +/* THIS FILE WAS GENERATED AND IS EXPERIMENTAL! + * + * This file was generated by qmk-compile-json. You may or may not want to + * edit it directly. + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(KC_ENTER) +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { + tap_code(KC_UP); + } else { + tap_code(KC_DOWN); + } + } + +}; diff --git a/keyboards/handwired/onekey/pytest/templates/keymap.json b/keyboards/handwired/onekey/pytest/templates/keymap.json new file mode 100644 index 000000000..35344388f --- /dev/null +++ b/keyboards/handwired/onekey/pytest/templates/keymap.json @@ -0,0 +1,3 @@ +{ + "documentation": "This file is a keymap.json file for handwired/onekey/pytest" +} diff --git a/keyboards/handwired/riblee_f401/chconf.h b/keyboards/handwired/riblee_f401/chconf.h deleted file mode 100644 index 7dc4f84a8..000000000 --- a/keyboards/handwired/riblee_f401/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/riblee_f401/halconf.h b/keyboards/handwired/riblee_f401/halconf.h deleted file mode 100644 index a8db392aa..000000000 --- a/keyboards/handwired/riblee_f401/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/riblee_f401/mcuconf.h b/keyboards/handwired/riblee_f401/mcuconf.h deleted file mode 100644 index ba6e934fe..000000000 --- a/keyboards/handwired/riblee_f401/mcuconf.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 25 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 4 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 6 -#define STM32_IRQ_EXTI20_PRIORITY 6 -#define STM32_IRQ_EXTI21_PRIORITY 15 -#define STM32_IRQ_EXTI22_PRIORITY 15 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/handwired/riblee_f401/README.md b/keyboards/handwired/riblee_f401/readme.md index 6287ac40c..6287ac40c 100644 --- a/keyboards/handwired/riblee_f401/README.md +++ b/keyboards/handwired/riblee_f401/readme.md diff --git a/keyboards/handwired/t111/rules.mk b/keyboards/handwired/t111/rules.mk index e6776a643..1c391242b 100644 --- a/keyboards/handwired/t111/rules.mk +++ b/keyboards/handwired/t111/rules.mk @@ -1,12 +1,7 @@ MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO -STM32_BOOTLOADER_ADDRESS = 0x80000000 - -DFU_ARGS = -d 1EAF:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1EAF -p 0003 +# Bootloader selection +BOOTLOADER = stm32duino # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/z150/rules.mk b/keyboards/handwired/z150/rules.mk index fd1d38203..d86e9f6e4 100644 --- a/keyboards/handwired/z150/rules.mk +++ b/keyboards/handwired/z150/rules.mk @@ -1,12 +1,7 @@ MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO -STM32_BOOTLOADER_ADDRESS = 0x80000000 - -DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# Bootloader selection +BOOTLOADER = stm32duino # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/zergo/config.h b/keyboards/handwired/zergo/config.h index 55fbd280c..8bac9970a 100644 --- a/keyboards/handwired/zergo/config.h +++ b/keyboards/handwired/zergo/config.h @@ -33,18 +33,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* key matrix pins */ #define MATRIX_ROW_PINS { B1, D7, C3, D6, D5, D4 } #define MATRIX_COL_PINS { C7, C6, C5, C4, C2, C1, B7, D3, D2, B6, B5, B4, B3, B2 } -#define UNUSED_PINS +#define UNUSED_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, C0, E0, E1, E4, E5, F0, F1, F2, F3, F4, F5, F6, F7 } /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* number of backlight levels */ - /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/zergo/keymaps/default/keymap.c b/keyboards/handwired/zergo/keymaps/default/keymap.c index a9dcc82ae..19a2b9b2c 100644 --- a/keyboards/handwired/zergo/keymaps/default/keymap.c +++ b/keyboards/handwired/zergo/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2020 E.Zelianin + /* Copyright 2020 E.Zelianin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,22 +16,37 @@ #include QMK_KEYBOARD_H +// Each layer gets a name for readability. +enum zergo_layers { + l_main, + l_arrows, +}; + +//define keycode custom names to better structure view of layout +#define K_SPCFN LT(l_arrows,KC_SPC) // tap for space, hold for arrows layer +#define K_SHHOME MT(MOD_LSFT,KC_HOME) // tap for home, hold for shift +#define K_CEND MT(MOD_LCTL,KC_END) // tap for end, hoild for control +#define K_SHPGUP MT(MOD_RSFT,KC_PGUP) // tap for pageup, hoLd for shift +#define K_CPGDN MT(MOD_RCTL, KC_PGDN) // tap for pagedown, hold for control +#define K_LNG LCTL(KC_LSFT) // control+shift (to change lahguage) +#define K_CENTER MT(MOD_RCTL,KC_ENTER) // tap for enter, hold for control + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - KC_DEL, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(1), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSLS, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_RCTL, - MT(MOD_LSFT, KC_HOME), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RBRC, MT(MOD_RSFT, KC_PGUP), - MT(MOD_LCTL, KC_END), KC_DOWN, KC_RGHT, KC_LALT, KC_SPC, KC_ENT, KC_SPC, KC_RALT, KC_LGUI, KC_MENU, MT(MOD_RCTL, KC_PGDN)), +[l_main] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_DEL, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, K_LNG, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, K_CENTER, + K_SHHOME, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RBRC, K_SHPGUP, + K_CEND, KC_NO, KC_NO, KC_LALT, KC_SPC, KC_ENT, K_SPCFN, KC_RALT, KC_APP, KC_RGUI, K_CPGDN), - LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, KC_UP, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +[l_arrows] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_ENT, KC_UP, KC_BSPC, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, + _______, _______, _______, _______, _______, KC_INS, _______, _______, _______, _______, _______), }; diff --git a/keyboards/handwired/zergo/rules.mk b/keyboards/handwired/zergo/rules.mk index e633ab396..ea5530ffa 100644 --- a/keyboards/handwired/zergo/rules.mk +++ b/keyboards/handwired/zergo/rules.mk @@ -7,16 +7,16 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -BLUETOOTH_ENABLE = no # Enable Bluetooth -AUDIO_ENABLE = no # Audio output +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/zergo/zergo.h b/keyboards/handwired/zergo/zergo.h index 5b7695868..ba6532164 100644 --- a/keyboards/handwired/zergo/zergo.h +++ b/keyboards/handwired/zergo/zergo.h @@ -19,17 +19,17 @@ #include "quantum.h" #define LAYOUT( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ - K100, K101, K102, K103, K104, K105, K206, K106, K107, K108, K109, K110, K111, K112, K113, \ - K200, K201, K202, K203, K204, K205, K306, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K307, K308, K309, K310, K311, K312, K313, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, \ - K500, K501, K502, K503, K505, K506, K507, K509, K511, K512, K513 \ + K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ + K100, K101, K102, K103, K104, K105, K206, K106, K107, K108, K109, K110, K111, K112, K113, \ + K200, K201, K202, K203, K204, K205, K306, K207, K208, K209, K210, K211, K212, K213, \ + K300, K301, K302, K303, K304, K305, K307, K308, K309, K310, K311, K312, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, \ + K500, K501, K502, K503, K505, K506, K507, K509, K510, K512, K513 \ ) { \ { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413 }, \ - { K500, K501, K502, K503, KC_NO, K505, K506, K507, KC_NO, K509, KC_NO, K511, K512, K513 } \ + { K500, K501, K502, K503, KC_NO, K505, K506, K507, KC_NO, K509, K510, KC_NO, K512, K513 } \ } diff --git a/keyboards/helix/helix.h b/keyboards/helix/helix.h index d3d3b0416..b900d975d 100644 --- a/keyboards/helix/helix.h +++ b/keyboards/helix/helix.h @@ -8,6 +8,12 @@ #ifdef KEYBOARD_helix_rev2 #include "rev2.h" #endif +#ifdef KEYBOARD_helix_rev3_5rows + #include "rev3_5rows.h" +#endif +#ifdef KEYBOARD_helix_rev3_4rows + #include "rev3_4rows.h" +#endif #ifdef KEYBOARD_helix_pico #include "pico.h" #endif diff --git a/keyboards/helix/readme.md b/keyboards/helix/readme.md index e1161cfdf..0c190f762 100644 --- a/keyboards/helix/readme.md +++ b/keyboards/helix/readme.md @@ -5,9 +5,9 @@ Helix A compact split ortholinear keyboard. -Keyboard Maintainer: [Makoto Kurauchi](https://github.com/MakotoKurauchi/) [@pluis9](https://twitter.com/pluis9) -Hardware Supported: Helix PCB Alpha, Beta, Pro Micro -Hardware Availability: [PCB & Case Data](https://github.com/MakotoKurauchi/helix), [Yushakobo Shop](https://yushakobo.jp/shop/), [Little Keyboards](https://littlekeyboards.com/collections/helix) +Keyboard Maintainer: [Makoto Kurauchi](https://github.com/MakotoKurauchi/) [@pluis9](https://twitter.com/pluis9) [yushakobo](https://github.com/yushakobo) +Hardware Supported: Helix PCB Alpha, Beta, Rev3, Pro Micro +Hardware Availability: [PCB & Case Data](https://github.com/MakotoKurauchi/helix), [Yushakobo Shop](https://yushakobo.jp/shop/), [Little Keyboards](https://littlekeyboards.com/collections/helix) ## How to build * [Helix how to Customize and Compile](rev2/keymaps/default/readme.md#customize) diff --git a/keyboards/helix/rev3_4rows/config.h b/keyboards/helix/rev3_4rows/config.h new file mode 100644 index 000000000..d2de347b9 --- /dev/null +++ b/keyboards/helix/rev3_4rows/config.h @@ -0,0 +1,245 @@ +/* +Copyright 2020 yushakobo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" +#include <stdio.h> + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x3265 //yushakobo +#define PRODUCT_ID 0x0004 //Helix rev3 4rows +#define DEVICE_VER 0x0001 +#define MANUFACTURER yushakobo +#define PRODUCT Helix rev3 4rows + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 7 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D4, C6, D7, E6 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Split hand configration */ +#define SPLIT_HAND_MATRIX_GRID D7,B2 + +/* Dip switch on matrix grid */ +#define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {5,6}, {6,6} } + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + +#define RGB_DI_PIN D3 +#define RGBLED_NUM 50 // Number of LEDs + +#ifdef RGB_MATRIX_ENABLE + #define DRIVER_LED_TOTAL RGBLED_NUM +# define RGB_MATRIX_KEYPRESSES // reacts to keypresses +// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. +# define RGB_MATRIX_HUE_STEP 8 +# define RGB_MATRIX_SAT_STEP 8 +# define RGB_MATRIX_VAL_STEP 8 +# define RGB_MATRIX_SPD_STEP 10 +#endif + +#ifdef RGBLIGHT_ENABLE + #define RGBLIGHT_SPLIT + #define RGBLED_SPLIT { 25, 25 } +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif + +/* Custom font */ +#define OLED_FONT_H "keyboards/helix/common/glcdfont.c" + +/* Encorder */ +#define ENCODERS_PAD_A { B6 } +#define ENCODERS_PAD_B { B5 } + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/helix/rev3_4rows/info.json b/keyboards/helix/rev3_4rows/info.json new file mode 100644 index 000000000..0ad2a7c3c --- /dev/null +++ b/keyboards/helix/rev3_4rows/info.json @@ -0,0 +1,17 @@ +{ + "keyboard_name": "Helix rev3 4rows", + "url": "", + "maintainer": "yushakobo", + "width": 15, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, + {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, + {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, + {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3} + ] + } + } +} diff --git a/keyboards/helix/rev3_4rows/keymaps/default/config.h b/keyboards/helix/rev3_4rows/keymaps/default/config.h new file mode 100644 index 000000000..ba446182d --- /dev/null +++ b/keyboards/helix/rev3_4rows/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/helix/rev3_4rows/keymaps/default/keymap.c b/keyboards/helix/rev3_4rows/keymaps/default/keymap.c new file mode 100644 index 000000000..a9a2c4acc --- /dev/null +++ b/keyboards/helix/rev3_4rows/keymaps/default/keymap.c @@ -0,0 +1,193 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + EISU = SAFE_RANGE, + KANA, + ADJUST, + RGBRST +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | + * `-------------------------------------------------------------------------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | CAPS | F7 | F8 | F9 | F10 | F11 | | F12 | | | Home | End | | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_LOWER] = LAYOUT( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_HOME, KC_END, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | CAPS | F7 | F8 | F9 | F10 | F11 | | F12 | | |PageDn|PageUp| | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_RAISE] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_PGDN, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | Reset|RGBRST|EEPRST| | | | | | | | | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | Mac | | Win | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | MODE | HUE- | SAT- | VAL- | + * `-------------------------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, RESET, RGBRST, EEP_RST, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ + ) + +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* Left side encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { /* Right side encoder */ + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } +} + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case EISU: + if (record->event.pressed) { + if (is_mac_mode()) { + register_code(KC_LANG2); + }else{ + tap_code16(LALT(KC_GRAVE)); + } + } else { + unregister_code(KC_LANG2); + } + return false; + break; + case KANA: + if (record->event.pressed) { + if (is_mac_mode()) { + register_code(KC_LANG1); + }else{ + tap_code16(LALT(KC_GRAVE)); + } + } else { + unregister_code(KC_LANG1); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_LOWER); + layer_on(_RAISE); + } else { + layer_off(_LOWER); + layer_off(_RAISE); + } + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + } + #endif + break; + } + return true; +} + +/* +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool led_update_user(led_t led_state) { + return true; +} +*/ diff --git a/keyboards/helix/rev3_4rows/keymaps/default/readme.md b/keyboards/helix/rev3_4rows/keymaps/default/readme.md new file mode 100644 index 000000000..e74709685 --- /dev/null +++ b/keyboards/helix/rev3_4rows/keymaps/default/readme.md @@ -0,0 +1,66 @@ +# The default keymap for Helix rev3 4rows + +### Qwerty Layer (Base) +``` +,-----------------------------------------. ,-----------------------------------------. +| Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | +|------+------+------+------+------+------+-------------+------+------+------+------+------+------| +|Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | +`-------------------------------------------------------------------------------------------------' +``` +### Lower Layer +``` +,-----------------------------------------. ,-----------------------------------------. +| ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| CAPS | F7 | F8 | F9 | F10 | F11 | | F12 | | | Home | End | | +|------+------+------+------+------+------+-------------+------+------+------+------+------+------| +| | | | | | | | | | | Next | Vol- | Vol+ | Play | +`-------------------------------------------------------------------------------------------------' +``` +### Raise Layer +``` +,-----------------------------------------. ,-----------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| CAPS | F7 | F8 | F9 | F10 | F11 | | F12 | | |PageDn|PageUp| | +|------+------+------+------+------+------+-------------+------+------+------+------+------+------| +| | | | | | | | | | | Next | Vol- | Vol+ | Play | +`-------------------------------------------------------------------------------------------------' +``` +### Adjust Layer (Lower + Raise) +``` +,-----------------------------------------. ,-----------------------------------------. +| F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | Reset|RGBRST|EEPRST| | | | | | | | | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | Mac | | Win | |RGB ON| HUE+ | SAT+ | VAL+ | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | MODE | HUE- | SAT- | VAL- | +`-------------------------------------------------------------------------------------------------' +``` + +### Rotary Encoder Settings + +|L/R|Clockwise|Counter Clockwise| +|---|---|---| +|Left|Page Down|Page Up| +|Right|Down|Up| + +### DipSW Settings + +|Switch No.|| +|---|---| +|Left 1|Toggle Win/mac| +|Left 2|Not assigned| +|Right 1|Not assigned| +|Right 2|Not assigned| diff --git a/keyboards/helix/rev3_4rows/keymaps/via/config.h b/keyboards/helix/rev3_4rows/keymaps/via/config.h new file mode 100644 index 000000000..ba446182d --- /dev/null +++ b/keyboards/helix/rev3_4rows/keymaps/via/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/helix/rev3_4rows/keymaps/via/keymap.c b/keyboards/helix/rev3_4rows/keymaps/via/keymap.c new file mode 100644 index 000000000..5611c96b3 --- /dev/null +++ b/keyboards/helix/rev3_4rows/keymaps/via/keymap.c @@ -0,0 +1,180 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + EISU = SAFE_RANGE, + KANA, + ADJUST, + RGBRST +}; + +#define LOWER FN_MO13 +#define RAISE FN_MO23 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | + * `-------------------------------------------------------------------------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + MO(_ADJUST), KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | CAPS | F7 | F8 | F9 | F10 | F11 | | F12 | | | Home | End | | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_LOWER] = LAYOUT( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_HOME, KC_END, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | CAPS | F7 | F8 | F9 | F10 | F11 | | F12 | | |PageDn|PageUp| | + * |------+------+------+------+------+------+-------------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_RAISE] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_PGDN, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | Reset|RGBRST| | | | | | | | | | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | Mac | | Win | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | MODE | HUE- | SAT- | VAL- | + * `-------------------------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, RESET, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ + ) + +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* Left side encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { /* Right side encoder */ + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case EISU: + if (record->event.pressed) { + if (is_mac_mode()) { + register_code(KC_LANG2); + }else{ + tap_code16(LALT(KC_GRAVE)); + } + } else { + unregister_code(KC_LANG2); + } + return false; + break; + case KANA: + if (record->event.pressed) { + if (is_mac_mode()) { + register_code(KC_LANG1); + }else{ + tap_code16(LALT(KC_GRAVE)); + } + } else { + unregister_code(KC_LANG1); + } + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + } + #endif + break; + } + return true; +} + +/* +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool led_update_user(led_t led_state) { + return true; +} +*/ diff --git a/keyboards/helix/rev3_4rows/keymaps/via/readme.md b/keyboards/helix/rev3_4rows/keymaps/via/readme.md new file mode 100644 index 000000000..34030075f --- /dev/null +++ b/keyboards/helix/rev3_4rows/keymaps/via/readme.md @@ -0,0 +1,66 @@ +# The default VIA keymap for Helix rev3 4rows + +### Qwerty Layer (Base) +``` +,-----------------------------------------. ,-----------------------------------------. +| Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | +|------+------+------+------+------+------+-------------+------+------+------+------+------+------| +|Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | +`-------------------------------------------------------------------------------------------------' +``` +### Lower Layer +``` +,-----------------------------------------. ,-----------------------------------------. +| ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| CAPS | F7 | F8 | F9 | F10 | F11 | | F12 | | | Home | End | | +|------+------+------+------+------+------+-------------+------+------+------+------+------+------| +| | | | | | | | | | | Next | Vol- | Vol+ | Play | +`-------------------------------------------------------------------------------------------------' +``` +### Raise Layer +``` +,-----------------------------------------. ,-----------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| CAPS | F7 | F8 | F9 | F10 | F11 | | F12 | | |PageDn|PageUp| | +|------+------+------+------+------+------+-------------+------+------+------+------+------+------| +| | | | | | | | | | | Next | Vol- | Vol+ | Play | +`-------------------------------------------------------------------------------------------------' +``` +### Adjust Layer (Lower + Raise) +``` +,-----------------------------------------. ,-----------------------------------------. +| F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | Reset|RGBRST| | | | | | | | | | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | Mac | | Win | |RGB ON| HUE+ | SAT+ | VAL+ | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | MODE | HUE- | SAT- | VAL- | +`-------------------------------------------------------------------------------------------------' +``` + +### Rotary Encoder Settings + +|L/R|Clockwise|Counter Clockwise| +|---|---|---| +|Left|Page Down|Page Up| +|Right|Down|Up| + +### DipSW Settings + +|Switch No.|| +|---|---| +|Left 1|Toggle Win/mac| +|Left 2|Not assigned| +|Right 1|Not assigned| +|Right 2|Not assigned| diff --git a/keyboards/helix/rev3_4rows/keymaps/via/rules.mk b/keyboards/helix/rev3_4rows/keymaps/via/rules.mk new file mode 100644 index 000000000..1e5b99807 --- /dev/null +++ b/keyboards/helix/rev3_4rows/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/helix/rev3_4rows/oled_display.c b/keyboards/helix/rev3_4rows/oled_display.c new file mode 100644 index 000000000..7716a172c --- /dev/null +++ b/keyboards/helix/rev3_4rows/oled_display.c @@ -0,0 +1,123 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + How to Customize + + $ make helix/rev3_4rows:YOUR_KEYMAP:clean + $ cp keyboards/helix/rev3_4rows/oled_display.c keyboards/helix/rev3_4rows/keymaps/YOUR_KEYMAP + + $ edit keyboards/helix/rev3_4rows/keymaps/YOUR_KEYMAP/oled_display.c + $ make helix/rev3_4rows:YOUR_KEYMAP + $ make helix/rev3_4rows:YOUR_KEYMAP:flash + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +#ifdef OLED_DRIVER_ENABLE + +void render_status(void) { + + // Render to mode icon + static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if (is_mac_mode()) { + oled_write_P(os_logo[0][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[0][1], false); + }else{ + oled_write_P(os_logo[1][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[1][1], false); + } + + oled_write_P(PSTR(" "), false); + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise\n"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + oled_write_P(PSTR("\n"), false); + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); +} + + +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 + }; + + oled_write_P(qmk_logo, false); +} + +static void render_rgbled_status(bool full) { +#ifdef RGBLIGHT_ENABLE + char buf[30]; + if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { + if (full) { + snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", + rgblight_get_mode(), + rgblight_get_hue()/RGBLIGHT_HUE_STEP, + rgblight_get_sat()/RGBLIGHT_SAT_STEP, + rgblight_get_val()/RGBLIGHT_VAL_STEP); + } else { + snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode()); + } + oled_write(buf, false); + } +#endif +} + +void oled_task_user(void) { + if(is_keyboard_master()){ + render_status(); + }else{ + render_logo(); + render_rgbled_status(true); + } +} +#endif diff --git a/keyboards/helix/rev3_4rows/readme.md b/keyboards/helix/rev3_4rows/readme.md new file mode 100644 index 000000000..25e856bad --- /dev/null +++ b/keyboards/helix/rev3_4rows/readme.md @@ -0,0 +1,13 @@ +# Helix rev3 4rows + +A compact split ortholinear keyboard. + +* Keyboard Maintainer: [yushakobo](https://github.com/yushakobo) +* Hardware Supported: Helix rev3 PCBs, Pro Micro +* Hardware Availability: (Under preparation) + +Make example for this keyboard (after setting up your build environment): + + make helix/rev3_4rows:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/helix/rev3_4rows/rev3_4rows.c b/keyboards/helix/rev3_4rows/rev3_4rows.c new file mode 100644 index 000000000..cf183366d --- /dev/null +++ b/keyboards/helix/rev3_4rows/rev3_4rows.c @@ -0,0 +1,48 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "helix.h" + +bool is_mac_mode(void) { + return keymap_config.swap_lalt_lgui == false; +} + +void set_mac_mode(bool macmode) { + if (macmode) { + /* The result is the same as pressing the AG_NORM(=MAGIC_UNSWAP_ALT_GUI) key. */ + /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L123-L124 */ + keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = false; + } else { + /* The result is the same as pressing the AG_SWAP(=MAGIC_SWAP_ALT_GUI) key. */ + /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L80-L81 */ + keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = true; + } +} + +void dip_switch_update_kb(uint8_t index, bool active) { + switch (index) { + case 0: + if(active) { // Left no.1 Helix rev3 common + set_mac_mode(false); + } else { + set_mac_mode(true); + } + break; + default: // Left no.2 or Right no.1 or Right no.2 for user/keymap + dip_switch_update_user(index, active); + break; + } +} diff --git a/keyboards/helix/rev3_4rows/rev3_4rows.h b/keyboards/helix/rev3_4rows/rev3_4rows.h new file mode 100644 index 000000000..dc1e2d5da --- /dev/null +++ b/keyboards/helix/rev3_4rows/rev3_4rows.h @@ -0,0 +1,47 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +bool is_mac_mode(void); +void set_mac_mode(bool macmode); + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05, KC_NO }, \ + { L10, L11, L12, L13, L14, L15, KC_NO }, \ + { L20, L21, L22, L23, L24, L25, KC_NO }, \ + { L30, L31, L32, L33, L34, L35, L36 }, \ + { R05, R04, R03, R02, R01, R00, KC_NO }, \ + { R15, R14, R13, R12, R11, R10, KC_NO }, \ + { R25, R24, R23, R22, R21, R20, KC_NO }, \ + { R35, R34, R33, R32, R31, R30, R36 }, \ + } diff --git a/keyboards/helix/rev3_4rows/rules.mk b/keyboards/helix/rev3_4rows/rules.mk new file mode 100644 index 000000000..7168f174f --- /dev/null +++ b/keyboards/helix/rev3_4rows/rules.mk @@ -0,0 +1,10 @@ +EXTRAKEY_ENABLE = yes # Audio control and System control +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +SPLIT_KEYBOARD = yes +#RGB_MATRIX_ENABLE = WS2812 +OLED_DRIVER_ENABLE = yes +ENCODER_ENABLE = yes +DIP_SWITCH_ENABLE = yes +LTO_ENABLE = yes + +SRC += oled_display.c diff --git a/keyboards/helix/rev3_5rows/config.h b/keyboards/helix/rev3_5rows/config.h new file mode 100644 index 000000000..bea914000 --- /dev/null +++ b/keyboards/helix/rev3_5rows/config.h @@ -0,0 +1,246 @@ +/* +Copyright 2020 yushakobo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" +#include <stdio.h> + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x3265 //yushakobo +#define PRODUCT_ID 0x0003 //Helix rev3 5rows +#define DEVICE_VER 0x0001 +#define MANUFACTURER yushakobo +#define PRODUCT Helix rev3 5rows + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 7 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Split hand configration */ +#define SPLIT_HAND_MATRIX_GRID D7,B2 +#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT + +/* Dip switch on matrix grid */ +#define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {5,6}, {6,6} } + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + +#define RGB_DI_PIN D3 +#define RGBLED_NUM 64 // Number of LEDs + +#ifdef RGB_MATRIX_ENABLE + #define DRIVER_LED_TOTAL RGBLED_NUM +# define RGB_MATRIX_KEYPRESSES // reacts to keypresses +// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. +# define RGB_MATRIX_HUE_STEP 8 +# define RGB_MATRIX_SAT_STEP 8 +# define RGB_MATRIX_VAL_STEP 8 +# define RGB_MATRIX_SPD_STEP 10 +#endif + +#ifdef RGBLIGHT_ENABLE + #define RGBLIGHT_SPLIT + #define RGBLED_SPLIT { 32, 32 } +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif + +/* Custom font */ +#define OLED_FONT_H "keyboards/helix/common/glcdfont.c" + +/* Encorder */ +#define ENCODERS_PAD_A { B6 } +#define ENCODERS_PAD_B { B5 } + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/helix/rev3_5rows/info.json b/keyboards/helix/rev3_5rows/info.json new file mode 100644 index 000000000..14a619944 --- /dev/null +++ b/keyboards/helix/rev3_5rows/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "Helix rev3 5rows", + "url": "", + "maintainer": "yushakobo", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, + {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, + {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, + {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, + {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4} + ] + } + } +} diff --git a/keyboards/helix/rev3_5rows/keymaps/default/config.h b/keyboards/helix/rev3_5rows/keymaps/default/config.h new file mode 100644 index 000000000..ba446182d --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/helix/rev3_5rows/keymaps/default/keymap.c b/keyboards/helix/rev3_5rows/keymaps/default/keymap.c new file mode 100644 index 000000000..18b559137 --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/default/keymap.c @@ -0,0 +1,203 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + EISU = SAFE_RANGE, + KANA, + ADJUST, + RGBRST +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | [ | ] | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | + * `-------------------------------------------------------------------------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | F7 | F8 | F9 | F10 | F11 | ( | ) | F12 | | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_LOWER] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_LPRN, KC_RPRN, KC_F12, _______, _______, KC_HOME, KC_END, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | F7 | F8 | F9 | F10 | F11 | | | F12 | | |PageDn|PageUp| | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_RAISE] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, KC_F12, _______, _______, KC_PGDN, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | Reset|RGBRST|EEPRST| | | | | | | | | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | Mac | | Win | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | MODE | HUE- | SAT- | VAL- | + * `-------------------------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, RESET, RGBRST, EEP_RST, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ + ) + +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* Left side encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { /* Right side encoder */ + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } +} + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case EISU: + if (record->event.pressed) { + if (is_mac_mode()) { + register_code(KC_LANG2); + }else{ + tap_code16(LALT(KC_GRAVE)); + } + } else { + unregister_code(KC_LANG2); + } + return false; + break; + case KANA: + if (record->event.pressed) { + if (is_mac_mode()) { + register_code(KC_LANG1); + }else{ + tap_code16(LALT(KC_GRAVE)); + } + } else { + unregister_code(KC_LANG1); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_LOWER); + layer_on(_RAISE); + } else { + layer_off(_LOWER); + layer_off(_RAISE); + } + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + } + #endif + break; + } + return true; +} + +/* +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool led_update_user(led_t led_state) { + return true; +} +*/ diff --git a/keyboards/helix/rev3_5rows/keymaps/default/readme.md b/keyboards/helix/rev3_5rows/keymaps/default/readme.md new file mode 100644 index 000000000..423443ba7 --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/default/readme.md @@ -0,0 +1,81 @@ +# The default keymap for Helix rev3 5rows + +### Qwerty Layer (Base) +``` +,-----------------------------------------. ,-----------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| Shift| Z | X | C | V | B | [ | ] | N | M | , | . | / |Enter | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +|Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | +`-------------------------------------------------------------------------------------------------' + +``` + +### Lower Layer +``` +,-----------------------------------------. ,-----------------------------------------. +| | | | | | | | | | | | | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| CAPS | F7 | F8 | F9 | F10 | F11 | ( | ) | F12 | | | Home | End | | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | Next | Vol- | Vol+ | Play | +`-------------------------------------------------------------------------------------------------' + +``` + + +### Raise Layer +``` +,-----------------------------------------. ,-----------------------------------------. +| | | | | | | | | | | | | Bksp | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| CAPS | F7 | F8 | F9 | F10 | F11 | | | F12 | | |PageDn|PageUp| | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | Next | Vol- | Vol+ | Play | +`-------------------------------------------------------------------------------------------------' + +``` + +### Adjust Layer (Lower + Raise) +``` +,-----------------------------------------. ,-----------------------------------------. +| F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | Reset|RGBRST|EEPRST| | | | | | | | | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | Mac | | Win | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | |RGB ON| HUE+ | SAT+ | VAL+ | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | MODE | HUE- | SAT- | VAL- | +`-------------------------------------------------------------------------------------------------' +``` + +### Rotary Encoder Settings + +|L/R|Clockwise|Counter Clockwise| +|---|---|---| +|Left|Page Down|Page Up| +|Right|Down|Up| + +### DipSW Settings + +|Switch No.|| +|---|---| +|Left 1|Toggle Win/mac| +|Left 2|Not assigned| +|Right 1|Not assigned| +|Right 2|Not assigned| diff --git a/keyboards/helix/rev3_5rows/keymaps/via/config.h b/keyboards/helix/rev3_5rows/keymaps/via/config.h new file mode 100644 index 000000000..ba446182d --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/via/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/helix/rev3_5rows/keymaps/via/keymap.c b/keyboards/helix/rev3_5rows/keymaps/via/keymap.c new file mode 100644 index 000000000..903e2637d --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/via/keymap.c @@ -0,0 +1,190 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + EISU = SAFE_RANGE, + KANA, + ADJUST, + RGBRST +}; + +#define LOWER FN_MO13 +#define RAISE FN_MO23 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | [ | ] | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | + * `-------------------------------------------------------------------------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + MO(_ADJUST), KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | F7 | F8 | F9 | F10 | F11 | ( | ) | F12 | | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_LOWER] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_LPRN, KC_RPRN, KC_F12, _______, _______, KC_HOME, KC_END, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | CAPS | F7 | F8 | F9 | F10 | F11 | | | F12 | | |PageDn|PageUp| | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ + [_RAISE] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, KC_F12, _______, _______, KC_PGDN, KC_PGUP, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | Reset|RGBRST| | | | | | | | | | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | Mac | | Win | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | MODE | HUE- | SAT- | VAL- | + * `-------------------------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, RESET, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \ + ) + +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* Left side encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { /* Right side encoder */ + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case EISU: + if (record->event.pressed) { + if (is_mac_mode()) { + register_code(KC_LANG2); + }else{ + tap_code16(LALT(KC_GRAVE)); + } + } else { + unregister_code(KC_LANG2); + } + return false; + break; + case KANA: + if (record->event.pressed) { + if (is_mac_mode()) { + register_code(KC_LANG1); + }else{ + tap_code16(LALT(KC_GRAVE)); + } + } else { + unregister_code(KC_LANG1); + } + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + } + #endif + break; + } + return true; +} + +/* +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool led_update_user(led_t led_state) { + return true; +} +*/ diff --git a/keyboards/helix/rev3_5rows/keymaps/via/readme.md b/keyboards/helix/rev3_5rows/keymaps/via/readme.md new file mode 100644 index 000000000..d3ea17f1b --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/via/readme.md @@ -0,0 +1,81 @@ +# The default VIA keymap for Helix rev3 5rows + +### Qwerty Layer (Base) +``` +,-----------------------------------------. ,-----------------------------------------. +| ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| Shift| Z | X | C | V | B | [ | ] | N | M | , | . | / |Enter | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +|Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right | +`-------------------------------------------------------------------------------------------------' + +``` + +### Lower Layer +``` +,-----------------------------------------. ,-----------------------------------------. +| | | | | | | | | | | | | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| CAPS | F7 | F8 | F9 | F10 | F11 | ( | ) | F12 | | | Home | End | | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | Next | Vol- | Vol+ | Play | +`-------------------------------------------------------------------------------------------------' + +``` + + +### Raise Layer +``` +,-----------------------------------------. ,-----------------------------------------. +| | | | | | | | | | | | | Bksp | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| CAPS | F7 | F8 | F9 | F10 | F11 | | | F12 | | |PageDn|PageUp| | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | Next | Vol- | Vol+ | Play | +`-------------------------------------------------------------------------------------------------' + +``` + +### Adjust Layer (Lower + Raise) +``` +,-----------------------------------------. ,-----------------------------------------. +| F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | Reset|RGBRST| | | | | | | | | | Del | +|------+------+------+------+------+------| |------+------+------+------+------+------| +| | | | | | Mac | | Win | | | | | | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | |RGB ON| HUE+ | SAT+ | VAL+ | +|------+------+------+------+------+------+------+------+------+------+------+------+------+------| +| | | | | | | | | | | MODE | HUE- | SAT- | VAL- | +`-------------------------------------------------------------------------------------------------' +``` + +### Rotary Encoder Settings + +|L/R|Clockwise|Counter Clockwise| +|---|---|---| +|Left|Page Down|Page Up| +|Right|Down|Up| + +### DipSW Settings + +|Switch No.|| +|---|---| +|Left 1|Toggle Win/mac| +|Left 2|Not assigned| +|Right 1|Not assigned| +|Right 2|Not assigned| diff --git a/keyboards/helix/rev3_5rows/keymaps/via/rules.mk b/keyboards/helix/rev3_5rows/keymaps/via/rules.mk new file mode 100644 index 000000000..1e5b99807 --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/helix/rev3_5rows/oled_display.c b/keyboards/helix/rev3_5rows/oled_display.c new file mode 100644 index 000000000..ffe8b594b --- /dev/null +++ b/keyboards/helix/rev3_5rows/oled_display.c @@ -0,0 +1,123 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + /* + How to Customize + + $ make helix/rev3_5rows:YOUR_KEYMAP:clean + $ cp keyboards/helix/rev3_5rows/oled_display.c keyboards/helix/rev3_5rows/keymaps/YOUR_KEYMAP + + $ edit keyboards/helix/rev3_5rows/keymaps/YOUR_KEYMAP/oled_display.c + $ make helix/rev3_5rows:YOUR_KEYMAP + $ make helix/rev3_5rows:YOUR_KEYMAP:flash + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +#ifdef OLED_DRIVER_ENABLE + +void render_status(void) { + + // Render to mode icon + static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if (is_mac_mode()) { + oled_write_P(os_logo[0][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[0][1], false); + }else{ + oled_write_P(os_logo[1][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[1][1], false); + } + + oled_write_P(PSTR(" "), false); + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise\n"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + oled_write_P(PSTR("\n"), false); + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); +} + + +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 + }; + + oled_write_P(qmk_logo, false); +} + +static void render_rgbled_status(bool full) { +#ifdef RGBLIGHT_ENABLE + char buf[30]; + if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { + if (full) { + snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", + rgblight_get_mode(), + rgblight_get_hue()/RGBLIGHT_HUE_STEP, + rgblight_get_sat()/RGBLIGHT_SAT_STEP, + rgblight_get_val()/RGBLIGHT_VAL_STEP); + } else { + snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode()); + } + oled_write(buf, false); + } +#endif +} + +void oled_task_user(void) { + if(is_keyboard_master()){ + render_status(); + }else{ + render_logo(); + render_rgbled_status(true); + } +} +#endif diff --git a/keyboards/helix/rev3_5rows/readme.md b/keyboards/helix/rev3_5rows/readme.md new file mode 100644 index 000000000..ff7e2cd59 --- /dev/null +++ b/keyboards/helix/rev3_5rows/readme.md @@ -0,0 +1,13 @@ +# Helix rev3 5rows + +A compact split ortholinear keyboard. + +* Keyboard Maintainer: [yushakobo](https://github.com/yushakobo) +* Hardware Supported: Helix rev3 PCBs, Pro Micro +* Hardware Availability: (Under preparation) + +Make example for this keyboard (after setting up your build environment): + + make helix/rev3_5rows:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/helix/rev3_5rows/rev3_5rows.c b/keyboards/helix/rev3_5rows/rev3_5rows.c new file mode 100644 index 000000000..cf183366d --- /dev/null +++ b/keyboards/helix/rev3_5rows/rev3_5rows.c @@ -0,0 +1,48 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "helix.h" + +bool is_mac_mode(void) { + return keymap_config.swap_lalt_lgui == false; +} + +void set_mac_mode(bool macmode) { + if (macmode) { + /* The result is the same as pressing the AG_NORM(=MAGIC_UNSWAP_ALT_GUI) key. */ + /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L123-L124 */ + keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = false; + } else { + /* The result is the same as pressing the AG_SWAP(=MAGIC_SWAP_ALT_GUI) key. */ + /* https://github.com/qmk/qmk_firmware/blob/fb4a6ad30ea7a648acd59793ed4a30c3a8d8dc32/quantum/process_keycode/process_magic.c#L80-L81 */ + keymap_config.swap_lalt_lgui = keymap_config.swap_ralt_rgui = true; + } +} + +void dip_switch_update_kb(uint8_t index, bool active) { + switch (index) { + case 0: + if(active) { // Left no.1 Helix rev3 common + set_mac_mode(false); + } else { + set_mac_mode(true); + } + break; + default: // Left no.2 or Right no.1 or Right no.2 for user/keymap + dip_switch_update_user(index, active); + break; + } +} diff --git a/keyboards/helix/rev3_5rows/rev3_5rows.h b/keyboards/helix/rev3_5rows/rev3_5rows.h new file mode 100644 index 000000000..1e3121d71 --- /dev/null +++ b/keyboards/helix/rev3_5rows/rev3_5rows.h @@ -0,0 +1,50 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +bool is_mac_mode(void); +void set_mac_mode(bool macmode); + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35, \ + L40, L41, L42, L43, L44, L45, L46, R46, R40, R41, R42, R43, R44, R45 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05, KC_NO }, \ + { L10, L11, L12, L13, L14, L15, KC_NO }, \ + { L20, L21, L22, L23, L24, L25, KC_NO }, \ + { L30, L31, L32, L33, L34, L35, L36 }, \ + { L40, L41, L42, L43, L44, L45, L46 }, \ + { R05, R04, R03, R02, R01, R00, KC_NO }, \ + { R15, R14, R13, R12, R11, R10, KC_NO }, \ + { R25, R24, R23, R22, R21, R20, KC_NO }, \ + { R35, R34, R33, R32, R31, R30, R36 }, \ + { R45, R44, R43, R42, R41, R40, R46 } \ + } diff --git a/keyboards/helix/rev3_5rows/rules.mk b/keyboards/helix/rev3_5rows/rules.mk new file mode 100644 index 000000000..7168f174f --- /dev/null +++ b/keyboards/helix/rev3_5rows/rules.mk @@ -0,0 +1,10 @@ +EXTRAKEY_ENABLE = yes # Audio control and System control +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +SPLIT_KEYBOARD = yes +#RGB_MATRIX_ENABLE = WS2812 +OLED_DRIVER_ENABLE = yes +ENCODER_ENABLE = yes +DIP_SWITCH_ENABLE = yes +LTO_ENABLE = yes + +SRC += oled_display.c diff --git a/keyboards/kbdfans/bella/soldered/keymaps/default/keymap.c b/keyboards/kbdfans/bella/soldered/keymaps/default/keymap.c index fc93b5ded..94e001ac0 100755 --- a/keyboards/kbdfans/bella/soldered/keymaps/default/keymap.c +++ b/keyboards/kbdfans/bella/soldered/keymaps/default/keymap.c @@ -22,8 +22,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/kbdfans/bella/soldered/keymaps/via/keymap.c b/keyboards/kbdfans/bella/soldered/keymaps/via/keymap.c index b9c77ce91..c75a41551 100755 --- a/keyboards/kbdfans/bella/soldered/keymaps/via/keymap.c +++ b/keyboards/kbdfans/bella/soldered/keymaps/via/keymap.c @@ -22,8 +22,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LALT, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/kbdfans/bella/soldered/soldered.h b/keyboards/kbdfans/bella/soldered/soldered.h index cebfc1bc6..6e60f66e2 100755 --- a/keyboards/kbdfans/bella/soldered/soldered.h +++ b/keyboards/kbdfans/bella/soldered/soldered.h @@ -23,12 +23,12 @@ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K315, \ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K414, \ - K500, K501, K502, K506, K510, K511, K513, K514, K515 \ + K500, K501, K502, K506, K510, K511, K512, K514, K515 \ ) { \ { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, KC_NO, K011, K012, K013, K014, K015 }, \ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO, K315 }, \ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K414, KC_NO }, \ - { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, KC_NO, K513, K514, K515 } \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, KC_NO, K514, K515 } \ } diff --git a/keyboards/kbdfans/maja/maja.c b/keyboards/kbdfans/maja/maja.c index 545d8c46e..a0afcbda8 100755 --- a/keyboards/kbdfans/maja/maja.c +++ b/keyboards/kbdfans/maja/maja.c @@ -102,3 +102,12 @@ void suspend_wakeup_init_kb(void) { rgb_matrix_set_suspend_state(false); suspend_wakeup_init_user(); } + +__attribute__ ((weak)) +void rgb_matrix_indicators_user(void) +{ + if (host_keyboard_led_state().caps_lock) + { + rgb_matrix_set_color(30, 0xFF, 0xFF, 0xFF); + } +} diff --git a/keyboards/keyboardio/atreus/atreus.c b/keyboards/keyboardio/atreus/atreus.c new file mode 100644 index 000000000..0ad715658 --- /dev/null +++ b/keyboards/keyboardio/atreus/atreus.c @@ -0,0 +1,17 @@ +/* Copyright (C) 2019, 2020 Keyboard.io, Inc + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "atreus.h" diff --git a/keyboards/keyboardio/atreus/atreus.h b/keyboards/keyboardio/atreus/atreus.h new file mode 100644 index 000000000..b03276ff6 --- /dev/null +++ b/keyboards/keyboardio/atreus/atreus.h @@ -0,0 +1,32 @@ +/* Copyright (C) 2019, 2020 Keyboard.io, Inc + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, XXX, XXX, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, XXX, XXX, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ +} diff --git a/keyboards/keyboardio/atreus/config.h b/keyboards/keyboardio/atreus/config.h new file mode 100644 index 000000000..fb3a48e58 --- /dev/null +++ b/keyboards/keyboardio/atreus/config.h @@ -0,0 +1,81 @@ +/* Copyright (C) 2019, 2020 Keyboard.io, Inc + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0x1209 +#define PRODUCT_ID 0x2303 +#define DEVICE_VER 0x0000 +#define MANUFACTURER Keyboardio +#define PRODUCT Atreus + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +#define MATRIX_ROW_PINS { F6, F5, F4, F1 } +#define MATRIX_COL_PINS { F7, E2, C7, C6, B6, B5, D7, D6, D4, D5, D3, D2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/keyboardio/atreus/info.json b/keyboards/keyboardio/atreus/info.json new file mode 100644 index 000000000..69386999a --- /dev/null +++ b/keyboards/keyboardio/atreus/info.json @@ -0,0 +1,57 @@ +{ + "keyboard_name": "Keyboardio Atreus", + "url": "", + "maintainer": "keyboardio", + "width": 13, + "height": 4.7, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Q", "x":0, "y":0.6}, + {"label":"W", "x":1, "y":0.35}, + {"label":"E", "x":2, "y":0}, + {"label":"R", "x":3, "y":0.35}, + {"label":"T", "x":4, "y":0.7}, + {"label":"Y", "x":8, "y":0.7}, + {"label":"U", "x":9, "y":0.35}, + {"label":"I", "x":10, "y":0}, + {"label":"O", "x":11, "y":0.35}, + {"label":"P", "x":12, "y":0.6}, + {"label":"A", "x":0, "y":1.6}, + {"label":"S", "x":1, "y":1.35}, + {"label":"D", "x":2, "y":1}, + {"label":"F", "x":3, "y":1.35}, + {"label":"G", "x":4, "y":1.7}, + {"label":"H", "x":8, "y":1.7}, + {"label":"J", "x":9, "y":1.35}, + {"label":"K", "x":10, "y":1}, + {"label":"L", "x":11, "y":1.35}, + {"label":";", "x":12, "y":1.6}, + {"label":"Z", "x":0, "y":2.6}, + {"label":"X", "x":1, "y":2.35}, + {"label":"C", "x":2, "y":2}, + {"label":"V", "x":3, "y":2.35}, + {"label":"B", "x":4, "y":2.7}, + {"label":"`", "x":5, "y":2.54}, + {"label":"\\", "x":7, "y":2.54}, + {"label":"N", "x":8, "y":2.7}, + {"label":"M", "x":9, "y":2.35}, + {"label":",", "x":10, "y":2}, + {"label":".", "x":11, "y":2.35}, + {"label":"/", "x":12, "y":2.6}, + {"label":"Esc", "x":0, "y":3.6}, + {"label":"Tab", "x":1, "y":3.35}, + {"label":"Super", "x":2, "y":3}, + {"label":"Shift", "x":3, "y":3.35}, + {"label":"Bksp", "x":4, "y":3.7}, + {"label":"Ctrl", "x":5, "y":3.54}, + {"label":"Alt", "x":7, "y":3.54}, + {"label":"Space", "x":8, "y":3.7}, + {"label":"Fun", "x":9, "y":3.35}, + {"label":"-", "x":10, "y":3}, + {"label":"'", "x":11, "y":3.35}, + {"label":"Enter", "x":12,"y":3.6} + ] + } + } +} diff --git a/keyboards/keyboardio/atreus/keymaps/default/keymap.c b/keyboards/keyboardio/atreus/keymaps/default/keymap.c new file mode 100644 index 000000000..716873345 --- /dev/null +++ b/keyboards/keyboardio/atreus/keymaps/default/keymap.c @@ -0,0 +1,43 @@ +// Copyright (C) 2019, 2020 Keyboard.io, Inc +// +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include QMK_KEYBOARD_H + +enum layer_names { + _QW, + _RS, + _LW, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = LAYOUT( /* Qwerty */ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P , + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN , + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_BSLS, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH , + KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT ), + + /* + * ! @ up { } || pgup 7 8 9 * + * # left down right $ || pgdn 4 5 6 + + * [ ] ( ) & || ` 1 2 3 \ + * lower insert super shift bksp ctrl || alt space fn . 0 = + */ + [_RS] = LAYOUT( /* [> RAISE <] */ + KC_EXLM, KC_AT, KC_UP, KC_DLR, KC_PERC, KC_PGUP, KC_7, KC_8, KC_9, KC_BSPC, + KC_LPRN, KC_LEFT, KC_DOWN, KC_RGHT, KC_RPRN, KC_PGDN, KC_4, KC_5, KC_6, KC_BSLS, + KC_LBRC, KC_RBRC, KC_HASH, KC_LCBR, KC_RCBR, KC_CIRC, KC_AMPR,KC_ASTR, KC_1, KC_2, KC_3, KC_PLUS, + TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT,KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL ), + /* + * insert home up end pgup || up F7 F8 F9 F10 + * del left down right pgdn || down F4 F5 F6 F11 + * volup reset || F1 F2 F3 F12 + * voldn super shift bksp ctrl || alt space L0 prtsc scroll pause + */ + [_LW] = LAYOUT( /* [> LOWER <] */ + KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10 , + KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11 , + KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, _______, _______, KC_NO, KC_F1, KC_F2, KC_F3, KC_F12 , + KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ) +}; diff --git a/keyboards/keyboardio/atreus/readme.md b/keyboards/keyboardio/atreus/readme.md new file mode 100644 index 000000000..ab7dba14d --- /dev/null +++ b/keyboards/keyboardio/atreus/readme.md @@ -0,0 +1,31 @@ +# Keyboardio Atreus + + + +A small mechanical keyboard that is based around the shape of the human hand. + +* Keyboard Maintainer: [Keyboardio](https://github.com/keyboardio) +* Hardware Supported: Keyboardio Atreus +* Hardware Availability: https://www.kickstarter.com/projects/keyboardio/atreus + +These configuration files are specifically for the Keyboardio Atreus, a +collaboration between [Phil Hagelberg](https://github.com/technomancy) and +[Keyboardio](https://github.com/keyboardio). The keyboard is currently on +Kickstarter, and will come fully assembled. + +Make example for this keyboard (after setting up your build environment): + + make keyboardio/atreus:default + +Flashing example for this keyboard: + + make keyboardio/atreus:default:flash + +*Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.* + +To flash new firmware, the keyboard needs to be in bootloader mode. To do that, +one needs to hold the bottom left key (`Esc` by default) and reset the +keyboard - either via a macro, or by sending a hang-up signal to the keyboard +device, or by pressing the reset button on the bottom with a pin. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/keyboardio/atreus/rules.mk b/keyboards/keyboardio/atreus/rules.mk new file mode 100644 index 000000000..76ff03a80 --- /dev/null +++ b/keyboards/keyboardio/atreus/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +UNICODE_ENABLE = yes # Unicode diff --git a/keyboards/lfkeyboards/smk65/info.json b/keyboards/lfkeyboards/smk65/info.json index c81cc065e..dfba5737a 100644 --- a/keyboards/lfkeyboards/smk65/info.json +++ b/keyboards/lfkeyboards/smk65/info.json @@ -5,14 +5,11 @@ "width": 16, "height": 5, "layouts": { - "LAYOUT": { - "key_count": 68, + "LAYOUT_65_ansi": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] }, - - "LAYOUT_iso": { - "key_count": 69, - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + "LAYOUT_65_iso": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] } } } diff --git a/keyboards/lfkeyboards/smk65/keymaps/default/config.h b/keyboards/lfkeyboards/smk65/keymaps/default/config.h deleted file mode 100644 index 271f48d00..000000000 --- a/keyboards/lfkeyboards/smk65/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/lfkeyboards/smk65/keymaps/default/keymap.c b/keyboards/lfkeyboards/smk65/keymaps/default/keymap.c index 9c8ebdb63..996bee5f7 100644 --- a/keyboards/lfkeyboards/smk65/keymaps/default/keymap.c +++ b/keyboards/lfkeyboards/smk65/keymaps/default/keymap.c @@ -1,12 +1,25 @@ +/* +Copyright 2020 LFKeyboards +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #include QMK_KEYBOARD_H -enum keymap_layout { - VANILLA = 0, - FUNC, - SETTINGS, +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN }; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,------------------------------------------------------------.----. @@ -21,12 +34,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Win |Alt | Space |Alt |Ctrl|Func|Lft| Dn |Rig | * `-----------------------------------------------------------------' */ - [VANILLA] = LAYOUT( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT \ + [_BASE] = LAYOUT_65_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT ), /* Keymap VANILLA: Function Layer @@ -42,35 +55,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Win |Alt | Space |Alt |Ctrl|Func|Lft| Dn |Rig | * `-----------------------------------------------------------------' */ - [FUNC] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ - MU_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, \ - AU_TOG, KC_FN1, KC_FN3, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_MOD, \ - KC_FN5, KC_FN2, KC_FN4, _______, _______, _______, _______, MU_TOG, RGB_VAD, RGB_VAI, _______, _______, RGB_HUI, _______, \ - _______, _______, _______, _______, _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI \ - ), + [_FN] = LAYOUT_65_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, + MU_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, + AU_TOG, KC_FN1, KC_FN3, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_MOD, + KC_FN5, KC_FN2, KC_FN4, _______, _______, _______, _______, MU_TOG, RGB_VAD, RGB_VAI, _______, _______, RGB_HUI, _______, + _______, _______, _______, _______, _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI + ) }; +#ifndef NO_ACTION_FUNCTION const uint16_t PROGMEM fn_actions[] = { [1] = ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER), // FN1 - Increase Freq of audio click [2] = ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER), // FN2 - Decrease Freq of audio click [3] = ACTION_FUNCTION(LFK_CLICK_TIME_LONGER), // FN3 - Increase length of audio click [4] = ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER), // FN4 - Decrease length of audio click [5] = ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN5 - Toggle audio click - }; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} +}; +#endif diff --git a/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk b/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk index d8fe33f6c..0cc9a7b76 100644 --- a/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk +++ b/keyboards/lfkeyboards/smk65/keymaps/default/rules.mk @@ -1,26 +1,11 @@ # Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically +# change yes to no to disable # +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Disable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Disable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Disable RGB underlight -RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = no - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled -WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms +ISSI_ENABLE = no # If the I2C pullup resistors aren't install this must be disabled +WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms ifeq ($(strip $(ISSI_ENABLE)), yes) @@ -30,4 +15,3 @@ endif ifeq ($(strip $(WATCHDOG_ENABLE)), yes) TMK_COMMON_DEFS += -DWATCHDOG_ENABLE endif - diff --git a/keyboards/lfkeyboards/smk65/keymaps/iso/config.h b/keyboards/lfkeyboards/smk65/keymaps/iso/config.h deleted file mode 100644 index 8893d122e..000000000 --- a/keyboards/lfkeyboards/smk65/keymaps/iso/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif diff --git a/keyboards/lfkeyboards/smk65/keymaps/iso/keymap.c b/keyboards/lfkeyboards/smk65/keymaps/iso/keymap.c index ebf085122..c93abfd34 100644 --- a/keyboards/lfkeyboards/smk65/keymaps/iso/keymap.c +++ b/keyboards/lfkeyboards/smk65/keymaps/iso/keymap.c @@ -1,12 +1,25 @@ +/* +Copyright 2020 LFKeyboards +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #include QMK_KEYBOARD_H -enum keymap_layout { - VANILLA = 0, - FUNC, - SETTINGS, +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN }; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap VANILLA: (Base Layer) Default Layer * ,------------------------------------------------------------.----. @@ -21,12 +34,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Win |Alt | Space |Alt |Ctrl|Func|Lft| Dn |Rig | * `-----------------------------------------------------------------' */ - [VANILLA] = LAYOUT_iso( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_PGUP, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT \ + [_BASE] = LAYOUT_65_iso( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT ), /* Keymap VANILLA: Function Layer @@ -42,35 +55,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Win |Alt | Space |Alt |Ctrl|Func|Lft| Dn |Rig | * `-----------------------------------------------------------------' */ - [FUNC] = LAYOUT_iso( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \ - MU_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_TOG, \ - AU_TOG, KC_FN1, KC_FN3, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, \ - KC_FN5, _______, KC_FN2, KC_FN4, _______, _______, _______, _______, MU_TOG, RGB_VAD, RGB_VAI, _______, _______, RGB_HUI, _______, \ - _______, _______, _______, _______, _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI \ + [_FN] = LAYOUT_65_iso( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, + MU_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, + AU_TOG, KC_FN1, KC_FN3, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_MOD, + KC_FN5, _______, KC_FN2, KC_FN4, _______, _______, _______, _______, MU_TOG, RGB_VAD, RGB_VAI, _______, _______, RGB_HUI, _______, + _______, _______, _______, _______, _______, _______, _______, RGB_SAD, RGB_HUD, RGB_SAI ), }; +#ifndef NO_ACTION_FUNCTION const uint16_t PROGMEM fn_actions[] = { [1] = ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER), // FN1 - Increase Freq of audio click [2] = ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER), // FN2 - Decrease Freq of audio click [3] = ACTION_FUNCTION(LFK_CLICK_TIME_LONGER), // FN3 - Increase length of audio click [4] = ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER), // FN4 - Decrease length of audio click [5] = ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN5 - Toggle audio click - }; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} +}; +#endif diff --git a/keyboards/lfkeyboards/smk65/keymaps/iso/rules.mk b/keyboards/lfkeyboards/smk65/keymaps/iso/rules.mk index 312dfbc51..0cc9a7b76 100644 --- a/keyboards/lfkeyboards/smk65/keymaps/iso/rules.mk +++ b/keyboards/lfkeyboards/smk65/keymaps/iso/rules.mk @@ -1,26 +1,11 @@ # Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically +# change yes to no to disable # - -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = no # Disable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Disable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Disable RGB underlight -RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = no +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow ISSI_ENABLE = no # If the I2C pullup resistors aren't install this must be disabled -WATCHDOG_ENABLE = yes # Resets keyboard if matrix_scan isn't run every 250ms +WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms ifeq ($(strip $(ISSI_ENABLE)), yes) @@ -30,21 +15,3 @@ endif ifeq ($(strip $(WATCHDOG_ENABLE)), yes) TMK_COMMON_DEFS += -DWATCHDOG_ENABLE endif - - -# # Set the LFK78 hardware version. This is defined in rules.mk, but can be overidden here if desired -# # -# # RevB - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight -# # RevC/D - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB -# # -# # Set to B, C or D -# LFK_REV = D - -# ifeq ($(LFK_REV), B) -# MCU = atmega32u4 -# else -# MCU = at90usb1286 -# endif -# OPT_DEFS += -DLFK_REV_$(LFK_REV) -# OPT_DEFS += -DUSB_PRODUCT=\"LFK_Rev$(LFK_REV)\" - diff --git a/keyboards/lfkeyboards/smk65/readme.md b/keyboards/lfkeyboards/smk65/readme.md index 0d04ac5f7..50d52472b 100644 --- a/keyboards/lfkeyboards/smk65/readme.md +++ b/keyboards/lfkeyboards/smk65/readme.md @@ -1,14 +1,17 @@ -SMK65 -=== +# SMK65 65% layout based on Mat3o's Whitefox, but with support for SMK switches. -Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards) -Hardware Supported: SMK65 -Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/) +* Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards) +* Hardware Supported: SMK65 +* Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/) Make example for this keyboard (after setting up your build environment): make lfkeyboards/smk65:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
\ No newline at end of file +Flashing example for this keyboard: + + make lfkeyboards/smk65:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/lfkeyboards/smk65/config.h b/keyboards/lfkeyboards/smk65/revb/config.h index deca087bc..0d4fe40f3 100644 --- a/keyboards/lfkeyboards/smk65/config.h +++ b/keyboards/lfkeyboards/smk65/revb/config.h @@ -1,31 +1,27 @@ /* -Copyright 2012 Jun Wako <wakojun@gmail.com> - +Copyright 2020 LFKeyboards This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. - This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6062 -#define DEVICE_VER 0x0001 +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4C46 // "LF" +#define PRODUCT_ID 0x565B // "s65b" +#define DEVICE_VER 0x0006 #define MANUFACTURER LFKeyboards #define PRODUCT SMK65v2 -#define DESCRIPTION QMK keyboard firmware for SMK65 // RevA // #define DIODE_DIRECTION COL2ROW @@ -66,13 +62,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + /* * Force NKRO * @@ -95,54 +94,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define FORCE_NKRO /* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* * Feature disable options * These options are also useful to firmware size reduction. */ @@ -160,4 +111,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -#endif +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/lfkeyboards/smk65/smk65.c b/keyboards/lfkeyboards/smk65/revb/revb.c index d3654b880..7498febeb 100644 --- a/keyboards/lfkeyboards/smk65/smk65.c +++ b/keyboards/lfkeyboards/smk65/revb/revb.c @@ -1,3 +1,17 @@ +/* +Copyright 2020 LFKeyboards +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #include <avr/sfr_defs.h> #include <avr/timer_avr.h> #include <avr/wdt.h> @@ -132,13 +146,6 @@ void reset_keyboard_kb(){ reset_keyboard(); } -void led_set_kb(uint8_t usb_led) -{ - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - // LFK lighting info const uint8_t switch_matrices[] = {0, 1}; const uint8_t rgb_matrices[] = {6, 7}; diff --git a/keyboards/lfkeyboards/smk65/revb/revb.h b/keyboards/lfkeyboards/smk65/revb/revb.h new file mode 100644 index 000000000..3d3e5181f --- /dev/null +++ b/keyboards/lfkeyboards/smk65/revb/revb.h @@ -0,0 +1,134 @@ +/* +Copyright 2020 LFKeyboards +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* if the kb.h file exists (because we're running from qmkbuilder) include it */ +#ifdef __has_include +#if __has_include("kb.h") +#include "kb.h" +#endif +#endif + +#include "quantum.h" +#include "matrix.h" +#include <avr/sfr_defs.h> + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif + +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + + +typedef struct RGB_Color { + uint16_t red; + uint16_t green; + uint16_t blue; +} RGB_Color; + +typedef struct Layer_Info { + uint32_t layer; + uint32_t mask; + RGB_Color color; +} Layer_Info; + +extern const uint32_t layer_count; +extern const Layer_Info layer_info[]; + +enum action_functions { + LFK_CLEAR = 0, // Resets all layers + LFK_ESC_TILDE, // esc+lshift = ~ + LFK_SET_DEFAULT_LAYER, // changes and saves current base layer to eeprom + LFK_CLICK_TOGGLE, // Adjusts click duration + LFK_CLICK_FREQ_HIGHER, // Adjusts click frequency + LFK_CLICK_FREQ_LOWER, // Adjusts click frequency + LFK_CLICK_TIME_LONGER, // Adjusts click duration + LFK_CLICK_TIME_SHORTER, // Adjusts click duration + LFK_DEBUG_SETTINGS, // prints LED and click settings to HID + LFK_LED_TEST // cycles through switch and RGB LEDs +}; + +#define CLICK_HZ 500 +#define CLICK_MS 2 +#define CLICK_ENABLED 0 + +void reset_keyboard_kb(void); +void click(uint16_t freq, uint16_t duration); + +// readability +#define ___ KC_NO + +/* Vanilla Keymap */ +// This a shortcut to help you visually see your layout. +/* +* ,-------------------------------------------------------------------------------. +* | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1E | 1G | +* |-------------------------------------------------------------------------------| +* | 21 | 22 |23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D | 2F | 2G | +* |-------------------------------------------------------------------------------| +* | 31 | 32 |33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C | 3F | 3G | +* |-------------------------------------------------------------------------------| +* | 41 | 42 |43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C | 4D | 4F | 4G | +* |-------------------------------------------------------------------------------| +* | 51 | 52 | 53 | 57 | 5A | 5B | 5C | 5D | 5E | 3E | 4E | +* `-------------------------------------------------------------------------------' +*/ +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define LAYOUT_65_ansi( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, k1G, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, k2G, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3F, k3G, \ + k41, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \ + k51, k52, k53, k57, k5B, k5C, k5D, k5E, k3E, k4E \ +) { \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \ + { k41, ___, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \ + { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \ +} + +#define LAYOUT_65_iso( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, k1G, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2G, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3F, k2F, k3G, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \ + k51, k52, k53, k57, k5B, k5C, k5D, k5E, k3E, k4E \ +) { \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \ + { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \ + { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \ +} + +// TODO: remove backwards compatibility with previous keymaps +#define LAYOUT LAYOUT_65_ansi +#define LAYOUT_iso( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1G, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, k2G, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3F, k3G, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \ + k51, k52, k53, k57, k5B, k5C, k5D, k5E, k3E, k4E \ +) { \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, ___, k1G }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \ + { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \ + { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \ +} diff --git a/keyboards/lfkeyboards/smk65/revb/rules.mk b/keyboards/lfkeyboards/smk65/revb/rules.mk new file mode 100644 index 000000000..9e8237241 --- /dev/null +++ b/keyboards/lfkeyboards/smk65/revb/rules.mk @@ -0,0 +1,16 @@ +# MCU name +MCU = at90usb646 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 +AUDIO_ENABLE = no # Audio output + +# Extra source files for IS3731 lighting +SRC += TWIlib.c issi.c lighting.c diff --git a/keyboards/lfkeyboards/smk65/revf/config.h b/keyboards/lfkeyboards/smk65/revf/config.h new file mode 100644 index 000000000..d2cb5226d --- /dev/null +++ b/keyboards/lfkeyboards/smk65/revf/config.h @@ -0,0 +1,134 @@ +/* +Copyright 2020 LFKeyboards +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4C46 // "LF" +#define PRODUCT_ID 0x565F // "s65f" +#define DEVICE_VER 0x0006 +#define MANUFACTURER LFKeyboards +#define PRODUCT SMK65v2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, B3, B2, B1, F5 } +#define MATRIX_COL_PINS { E6, F4, B7, D5, D3, D2, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +# define RGBLED_NUM 28 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0
\ No newline at end of file diff --git a/keyboards/lfkeyboards/smk65/revf/keymaps/via/keymap.c b/keyboards/lfkeyboards/smk65/revf/keymaps/via/keymap.c new file mode 100644 index 000000000..ca2fe748a --- /dev/null +++ b/keyboards/lfkeyboards/smk65/revf/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +/* +Copyright 2020 LFKeyboards +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/lfkeyboards/smk65/revf/keymaps/via/rules.mk b/keyboards/lfkeyboards/smk65/revf/keymaps/via/rules.mk new file mode 100644 index 000000000..036bd6d1c --- /dev/null +++ b/keyboards/lfkeyboards/smk65/revf/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/lfkeyboards/smk65/revf/revf.h b/keyboards/lfkeyboards/smk65/revf/revf.h new file mode 100644 index 000000000..35238fdc7 --- /dev/null +++ b/keyboards/lfkeyboards/smk65/revf/revf.h @@ -0,0 +1,71 @@ +/* +Copyright 2020 LFKeyboards +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +// readability +#define ___ KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_65_ansi( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, k1G, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, k2G, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3F, k3G, \ + k41, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \ + k51, k52, k53, k57, k5B, k5C, k5D, k5E, k3E, k4E \ +) { \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \ + { k41, ___, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \ + { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \ +} + +#define LAYOUT_65_iso( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, k1G, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2G, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k2F, k3G, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \ + k51, k52, k53, k57, k5B, k5C, k5D, k5E, k3E, k4E \ +) { \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, ___, k3G }, \ + { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \ + { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \ +} + +#define LAYOUT_all( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, k2G, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3F, k3G, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \ + k51, k52, k53, k55, k57, k59, k5B, k5C, k5D, k5E, k3E, k4E \ +) { \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, k3G }, \ + { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \ + { k51, k52, k53, ___, k55, ___, k57, ___, k59, ___, k5B, k5C, k5D, k5E, ___, ___ }, \ +} diff --git a/keyboards/lfkeyboards/smk65/revf/rules.mk b/keyboards/lfkeyboards/smk65/revf/rules.mk new file mode 100644 index 000000000..1d20f1e28 --- /dev/null +++ b/keyboards/lfkeyboards/smk65/revf/rules.mk @@ -0,0 +1,11 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = halfkay + +# Build Options +# change yes to no to disable +# +RGBLIGHT_ENABLE = no # TODO: Enable keyboard RGB underglow +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/lfkeyboards/smk65/rules.mk b/keyboards/lfkeyboards/smk65/rules.mk index d3f009e4d..26bf8cd8a 100644 --- a/keyboards/lfkeyboards/smk65/rules.mk +++ b/keyboards/lfkeyboards/smk65/rules.mk @@ -1,15 +1,20 @@ -# MCU name -MCU = at90usb646 +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu +DEFAULT_FOLDER = lfkeyboards/smk65/revb -# Extra source files for IS3731 lighting -SRC = TWIlib.c issi.c lighting.c +LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/lfkeyboards/smk65/smk65.h b/keyboards/lfkeyboards/smk65/smk65.h index 4fe5300c0..534b763de 100644 --- a/keyboards/lfkeyboards/smk65/smk65.h +++ b/keyboards/lfkeyboards/smk65/smk65.h @@ -1,107 +1,23 @@ -#ifndef SMK65_H -#define SMK65_H +/* +Copyright 2020 LFKeyboards +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ -/* if the kb.h file exists (because we're running from qmkbuilder) include it */ -#ifdef __has_include -#if __has_include("kb.h") -#include "kb.h" -#endif -#endif +#pragma once #include "quantum.h" -#include "matrix.h" -#include <avr/sfr_defs.h> - -#ifndef cbi -#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) -#endif -#ifndef sbi -#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#ifdef KEYBOARD_lfkeyboards_smk65_revb + #include "revb.h" +#elif KEYBOARD_lfkeyboards_smk65_revf + #include "revf.h" #endif - - -typedef struct RGB_Color { - uint16_t red; - uint16_t green; - uint16_t blue; -} RGB_Color; - -typedef struct Layer_Info { - uint32_t layer; - uint32_t mask; - RGB_Color color; -} Layer_Info; - -extern const uint32_t layer_count; -extern const Layer_Info layer_info[]; - -enum action_functions { - LFK_CLEAR = 0, // Resets all layers - LFK_ESC_TILDE, // esc+lshift = ~ - LFK_SET_DEFAULT_LAYER, // changes and saves current base layer to eeprom - LFK_CLICK_TOGGLE, // Adjusts click duration - LFK_CLICK_FREQ_HIGHER, // Adjusts click frequency - LFK_CLICK_FREQ_LOWER, // Adjusts click frequency - LFK_CLICK_TIME_LONGER, // Adjusts click duration - LFK_CLICK_TIME_SHORTER, // Adjusts click duration - LFK_DEBUG_SETTINGS, // prints LED and click settings to HID - LFK_LED_TEST // cycles through switch and RGB LEDs -}; - -#define CLICK_HZ 500 -#define CLICK_MS 2 -#define CLICK_ENABLED 0 - -void reset_keyboard_kb(void); -void click(uint16_t freq, uint16_t duration); - -// readability -#define ___ KC_NO - -/* Vanilla Keymap */ -// This a shortcut to help you visually see your layout. -/* -* ,-------------------------------------------------------------------------------. -* | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1E | 1G | -* |-------------------------------------------------------------------------------| -* | 21 | 22 |23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D | 2F | 2G | -* |-------------------------------------------------------------------------------| -* | 31 | 32 |33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C | 3F | 3G | -* |-------------------------------------------------------------------------------| -* | 41 | 42 |43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C | 4D | 4F | 4G | -* |-------------------------------------------------------------------------------| -* | 51 | 52 | 53 | 57 | 5A | 5B | 5C | 5D | 5E | 3E | 4E | -* `-------------------------------------------------------------------------------' -*/ -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, k1G, \ - k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, k2G, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3F, k3G, \ - k41, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \ - k51, k52, k53, k57, k5B, k5C, k5D, k5E, k3E, k4E \ -) { \ - { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, ___, k1F, k1G }, \ - { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \ - { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \ - { k41, ___, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \ - { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \ -} - -#define LAYOUT_iso( \ - k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1G, \ - k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, k2G, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3F, k3G, \ - k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, k4G, \ - k51, k52, k53, k57, k5B, k5C, k5D, k5E, k3E, k4E \ -) { \ - { k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, ___, k1G }, \ - { k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, ___, k2F, k2G }, \ - { k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, ___, k3E, k3F, k3G }, \ - { k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G }, \ - { k51, k52, k53, ___, ___, ___, k57, ___, ___, ___, k5B, k5C, k5D, k5E, ___, ___ }, \ -} - -#endif //SMK65_H diff --git a/keyboards/melgeek/mj63/config.h b/keyboards/melgeek/mj63/config.h new file mode 100644 index 000000000..452b1c872 --- /dev/null +++ b/keyboards/melgeek/mj63/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 MelGeek <melgeek001365@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" diff --git a/keyboards/melgeek/mj63/info.json b/keyboards/melgeek/mj63/info.json new file mode 100644 index 000000000..f608b984e --- /dev/null +++ b/keyboards/melgeek/mj63/info.json @@ -0,0 +1,80 @@ +{ + "keyboard_name": "MJ63", + "url": "", + "maintainer": "melgeek001365", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_60_ansi_arrow": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4}, + {"x":11, "y":4}, + {"x":12, "y":4}, + {"x":13, "y":4}, + {"x":14, "y":4} + ] + } + } +} diff --git a/keyboards/melgeek/mj63/keymaps/default/keymap.c b/keyboards/melgeek/mj63/keymaps/default/keymap.c new file mode 100644 index 000000000..2829ae8fc --- /dev/null +++ b/keyboards/melgeek/mj63/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* Copyright 2020 MelGeek <melgeek001365@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), MO(2), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, _______, _______, _______, _______, _______, KC_CALC, _______, KC_INS, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, EEP_RST, + _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, KC_END, KC_PGDN, KC_VOLU, KC_MUTE, + _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + ), + [2] = LAYOUT_60_ansi_arrow( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/melgeek/mj63/keymaps/via/keymap.c b/keyboards/melgeek/mj63/keymaps/via/keymap.c new file mode 100644 index 000000000..37e25a834 --- /dev/null +++ b/keyboards/melgeek/mj63/keymaps/via/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2020 MelGeek <melgeek001365@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), MO(2), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, _______, _______, _______, _______, _______, KC_CALC, _______, KC_INS, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, EEP_RST, + _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, KC_END, KC_PGDN, KC_VOLU, KC_MUTE, + _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + ), + [2] = LAYOUT_60_ansi_arrow( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_60_ansi_arrow( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/melgeek/mj63/keymaps/via/rules.mk b/keyboards/melgeek/mj63/keymaps/via/rules.mk new file mode 100644 index 000000000..36b7ba9cb --- /dev/null +++ b/keyboards/melgeek/mj63/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/melgeek/mj63/mj63.c b/keyboards/melgeek/mj63/mj63.c new file mode 100644 index 000000000..8b1ff3865 --- /dev/null +++ b/keyboards/melgeek/mj63/mj63.c @@ -0,0 +1,17 @@ +/* Copyright 2020 MelGeek <melgeek001365@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "mj63.h" diff --git a/keyboards/melgeek/mj63/mj63.h b/keyboards/melgeek/mj63/mj63.h new file mode 100644 index 000000000..1b12b7b47 --- /dev/null +++ b/keyboards/melgeek/mj63/mj63.h @@ -0,0 +1,35 @@ +/* Copyright 2020 MelGeek <melgeek001365@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +#define LAYOUT_60_ansi_arrow( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3B, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, XXX, K3B, K3C, K3D }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, K4C, K4D } \ +} diff --git a/keyboards/melgeek/mj63/readme.md b/keyboards/melgeek/mj63/readme.md new file mode 100644 index 000000000..59f8b5417 --- /dev/null +++ b/keyboards/melgeek/mj63/readme.md @@ -0,0 +1,16 @@ +# MelGeek MJ63 + + + +A hotswap 60% RGB Custom Mechanical keyboard with arrows and the size of left shift is 2.0U + +* Keyboard Maintainer: [melgeek001365](https://github.com/melgeek001365) +* Hardware Supported: MJ63 V1.0.0 20200712 +* Hardware Availability: [MelGeek](https://www.melgeek.com/) + +Make example for this keyboard (after setting up your build environment): + + make melgeek/mj63/rev1:default + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/melgeek/mj63/rev1/config.h b/keyboards/melgeek/mj63/rev1/config.h new file mode 100644 index 000000000..4cd8d6a9d --- /dev/null +++ b/keyboards/melgeek/mj63/rev1/config.h @@ -0,0 +1,70 @@ +/* Copyright 2020 MelGeek <melgeek001365@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xEDED +#define PRODUCT_ID 0x6063 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MelGeek +#define PRODUCT MJ63 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +#define MATRIX_ROW_PINS { B12, B11, B10, B1, A3 } +#define MATRIX_COL_PINS { B15, A8, A10, A15, B3, B4, B5, B8, B9, C13, C14, C15, A0, A1 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 3 + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +//#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL +#define DRIVER_ADDR_1 0b0110000 +#define DRIVER_ADDR_2 0b0110000 // this is here for compliancy reasons. +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 65 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#define DRIVER_INDICATOR_LED_TOTAL 0 diff --git a/keyboards/melgeek/mj63/rev1/rev1.c b/keyboards/melgeek/mj63/rev1/rev1.c new file mode 100644 index 000000000..e9f75739c --- /dev/null +++ b/keyboards/melgeek/mj63/rev1/rev1.c @@ -0,0 +1,130 @@ +/* Copyright 2020 MelGeek <melgeek001365@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "mj63.h" + + +#ifdef RGB_MATRIX_ENABLE + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { + {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ + {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB2 */ + {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB3 */ + {0, CS9_SW4, CS8_SW4, CS7_SW4}, /* RGB4 */ + {0, CS9_SW5, CS8_SW5, CS7_SW5}, /* RGB5 */ + {0, CS9_SW6, CS8_SW6, CS7_SW6}, /* RGB6 */ + {0, CS9_SW7, CS8_SW7, CS7_SW7}, /* RGB7 */ + {0, CS9_SW8, CS8_SW8, CS7_SW8}, /* RGB8 */ + {0, CS9_SW9, CS8_SW9, CS7_SW9}, /* RGB9 */ + {0, CS12_SW1, CS11_SW1, CS10_SW1}, /* RGB10 */ + {0, CS12_SW2, CS11_SW2, CS10_SW2}, /* RGB11 */ + {0, CS12_SW3, CS11_SW3, CS10_SW3}, /* RGB12 */ + {0, CS12_SW4, CS11_SW4, CS10_SW4}, /* RGB13 */ + {0, CS12_SW5, CS11_SW5, CS10_SW5}, /* RGB14 */ + {0, CS12_SW6, CS11_SW6, CS10_SW6}, /* RGB15 */ + {0, CS12_SW7, CS11_SW7, CS10_SW7}, /* RGB16 */ + {0, CS12_SW8, CS11_SW8, CS10_SW8}, /* RGB17 */ + {0, CS12_SW9, CS11_SW9, CS10_SW9}, /* RGB18 */ + {0, CS15_SW1, CS14_SW1, CS13_SW1}, /* RGB19 */ + {0, CS15_SW2, CS14_SW2, CS13_SW2}, /* RGB20 */ + {0, CS15_SW3, CS14_SW3, CS13_SW3}, /* RGB21 */ + {0, CS15_SW4, CS14_SW4, CS13_SW4}, /* RGB22 */ + {0, CS15_SW5, CS14_SW5, CS13_SW5}, /* RGB23 */ + {0, CS15_SW6, CS14_SW6, CS13_SW6}, /* RGB24 */ + {0, CS15_SW7, CS14_SW7, CS13_SW7}, /* RGB25 */ + {0, CS15_SW8, CS14_SW8, CS13_SW8}, /* RGB26 */ + {0, CS15_SW9, CS14_SW9, CS13_SW9}, /* RGB27 */ + {0, CS18_SW1, CS17_SW1, CS16_SW1}, /* RGB28 */ + {0, CS18_SW2, CS17_SW2, CS16_SW2}, /* RGB29 */ + {0, CS18_SW3, CS17_SW3, CS16_SW3}, /* RGB30 */ + {0, CS18_SW4, CS17_SW4, CS16_SW4}, /* RGB31 */ + {0, CS18_SW5, CS17_SW5, CS16_SW5}, /* RGB32 */ + {0, CS18_SW6, CS17_SW6, CS16_SW6}, /* RGB33 */ + {0, CS18_SW7, CS17_SW7, CS16_SW7}, /* RGB34 */ + {0, CS18_SW8, CS17_SW8, CS16_SW8}, /* RGB35 */ + {0, CS18_SW9, CS17_SW9, CS16_SW9}, /* RGB36 */ + {0, CS21_SW1, CS20_SW1, CS19_SW1}, /* RGB37 */ + {0, CS21_SW2, CS20_SW2, CS19_SW2}, /* RGB38 */ + {0, CS21_SW3, CS20_SW3, CS19_SW3}, /* RGB39 */ + {0, CS21_SW4, CS20_SW4, CS19_SW4}, /* RGB40 */ + {0, CS21_SW5, CS20_SW5, CS19_SW5}, /* RGB41 */ + {0, CS21_SW6, CS20_SW6, CS19_SW6}, /* RGB42 */ + {0, CS21_SW7, CS20_SW7, CS19_SW7}, /* RGB43 */ + {0, CS21_SW8, CS20_SW8, CS19_SW8}, /* RGB44 */ + {0, CS24_SW1, CS23_SW1, CS22_SW1}, /* RGB46 */ + {0, CS24_SW2, CS23_SW2, CS22_SW2}, /* RGB47 */ + {0, CS24_SW3, CS23_SW3, CS22_SW3}, /* RGB48 */ + {0, CS24_SW4, CS23_SW4, CS22_SW4}, /* RGB49 */ + {0, CS24_SW5, CS23_SW5, CS22_SW5}, /* RGB50 */ + {0, CS24_SW6, CS23_SW6, CS22_SW6}, /* RGB51 */ + {0, CS24_SW7, CS23_SW7, CS22_SW7}, /* RGB52 */ + {0, CS24_SW8, CS23_SW8, CS22_SW8}, /* RGB53 */ + {0, CS24_SW9, CS23_SW9, CS22_SW9}, /* RGB54 */ + {0, CS30_SW2, CS29_SW2, CS28_SW2}, /* RGB55 */ + {0, CS27_SW2, CS26_SW2, CS25_SW2}, /* RGB56 */ + {0, CS27_SW3, CS26_SW3, CS25_SW3}, /* RGB57 */ + {0, CS27_SW4, CS26_SW4, CS25_SW4}, /* RGB58 */ + {0, CS27_SW5, CS26_SW5, CS25_SW5}, /* RGB59 */ + {0, CS27_SW6, CS26_SW6, CS25_SW6}, /* RGB60 */ + {0, CS30_SW7, CS29_SW7, CS28_SW7}, /* RGB61 */ + {0, CS30_SW8, CS29_SW8, CS28_SW8}, /* RGB62 */ + {0, CS30_SW9, CS29_SW9, CS28_SW9}, /* RGB63 */ + {0, CS30_SW1, CS29_SW1, CS28_SW1}, /* RGB64 */ + {0, CS27_SW1, CS26_SW1, CS25_SW1}, /* RGB65 */ + {0, CS30_SW5, CS29_SW5, CS28_SW5}, /* RGB66 */ +}; + +led_config_t g_led_config = { + { + /* C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 */ + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* R0 */ + { 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 }, /* R1 */ + { 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, NO_LED }, /* R2 */ + { 53, NO_LED, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41 }, /* R3 */ + { 61, 60, 59, NO_LED, 64, 62, 63, NO_LED, NO_LED, 58, 57, 56, 55, 54 }, /* R4 */ + }, { + {0, 0}, {16, 0}, {32, 0}, {48, 0}, {64, 0}, {80, 0}, {96, 0}, {112, 0}, {128, 0}, {144, 0}, {160, 0}, {176, 0}, {192, 0}, {208, 0}, + {0, 16}, {16, 16}, {32, 16}, {48, 16}, {64, 16}, {80, 16}, {96, 16}, {112, 16}, {128, 16}, {144, 16}, {160, 16}, {176, 16}, {192, 16}, {208, 16}, + {0, 32}, {16, 32}, {32, 32}, {48, 32}, {64, 32}, {80, 32}, {96, 32}, {112, 32}, {128, 32}, {144, 32}, {160, 32}, {176, 32}, {192, 32}, + {0, 48}, {16, 48}, {32, 48}, {48, 48}, {64, 48}, {80, 48}, {96, 48}, {112, 48}, {128, 48}, {144, 48}, {160, 48}, {176, 48}, {192, 48}, + {0, 64}, {16, 64}, {32, 64}, {48, 64}, {64, 64}, {80, 64}, {96, 64}, {112, 64}, {128, 64}, {144, 64}, {160, 64}, + }, { + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + } +}; + +void suspend_power_down_kb(void) { + rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); +} + +void suspend_wakeup_init_kb(void) { + rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); +} + +void keyboard_pre_init_kb(void) { + setPinOutput(A2); + writePinHigh(A2); + keyboard_pre_init_user(); +} + +#endif + diff --git a/keyboards/melgeek/mj63/rev1/rules.mk b/keyboards/melgeek/mj63/rev1/rules.mk new file mode 100644 index 000000000..998f1275a --- /dev/null +++ b/keyboards/melgeek/mj63/rev1/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = STM32F303 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +RGB_MATRIX_ENABLE = IS31FL3741 # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in + +LAYOUTS = 60_ansi_arrow diff --git a/keyboards/moonlander/config.h b/keyboards/moonlander/config.h index b77fcbd1e..d1c685280 100644 --- a/keyboards/moonlander/config.h +++ b/keyboards/moonlander/config.h @@ -1,6 +1,6 @@ /* Copyright 2020 ZSA Technology Labs, Inc <@zsa> * Copyright 2020 Jack Humbert <jack.humb@gmail.com> - * Copyright 2020 Drashna Jael're <drashna@live.com> + * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/moonlander/keymaps/default/config.h b/keyboards/moonlander/keymaps/default/config.h index 95b05a5a6..576aae9f5 100644 --- a/keyboards/moonlander/keymaps/default/config.h +++ b/keyboards/moonlander/keymaps/default/config.h @@ -1,6 +1,6 @@ /* Copyright 2020 ZSA Technology Labs, Inc <@zsa> * Copyright 2020 Jack Humbert <jack.humb@gmail.com> - * Copyright 2020 Drashna Jael're <drashna@live.com> + * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/moonlander/keymaps/default/keymap.c b/keyboards/moonlander/keymaps/default/keymap.c index 67a2cd53a..6d98a8607 100644 --- a/keyboards/moonlander/keymaps/default/keymap.c +++ b/keyboards/moonlander/keymaps/default/keymap.c @@ -1,6 +1,6 @@ /* Copyright 2020 ZSA Technology Labs, Inc <@zsa> * Copyright 2020 Jack Humbert <jack.humb@gmail.com> - * Copyright 2020 Drashna Jael're <drashna@live.com> + * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -35,68 +35,32 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT_moonlander( KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_HYPR, KC_MEH, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), GUI_T(KC_QUOT), - KC_LSFT, LCTL_T(KC_Z),KC_X,KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, LCTL_T(KC_SLSH), KC_LSFT, - LT(SYMB,KC_GRV),WEBUSB_PAIR,A(KC_LSFT),KC_LEFT, KC_RGHT, LALT_T(KC_APP), RCTL_T(KC_ESC), KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, TT(SYMB), - KC_SPC, KC_BSPC, KC_LGUI, KC_RALT, KC_TAB, KC_ENT + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_HYPR, KC_MEH, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), LGUI_T(KC_QUOT), + KC_LSFT, LCTL_T(KC_Z),KC_X,KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RCTL_T(KC_SLSH), KC_RSFT, + LT(SYMB,KC_GRV),WEBUSB_PAIR,A(KC_LSFT),KC_LEFT, KC_RGHT, LALT_T(KC_APP), RCTL_T(KC_ESC), KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, MO(SYMB), + KC_SPC, KC_BSPC, KC_LGUI, KC_LALT, KC_TAB, KC_ENT ), [SYMB] = LAYOUT_moonlander( - VRSN, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, - KC_TRNS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, KC_TRNS, KC_TRNS, KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, - KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, - EEP_RST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, RGB_TOG, KC_TRNS, KC_DOT, KC_0, KC_EQL, KC_TRNS, - RGB_HUD, RGB_VAD, RGB_HUI, TOGGLE_LAYER_COLOR,KC_TRNS, KC_TRNS + VRSN, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, _______, _______, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + _______, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, _______, _______, KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, _______, + _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, _______, + EEP_RST, _______, _______, _______, _______, RGB_VAI, RGB_TOG, _______, KC_DOT, KC_0, KC_EQL, _______, + RGB_HUD, RGB_VAD, RGB_HUI, TOGGLE_LAYER_COLOR,_______, _______ ), [MDIA] = LAYOUT_moonlander( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + LED_LEVEL,_______,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, _______, _______, + _______, _______, _______, KC_BTN1, KC_BTN2, _______, _______, KC_VOLU, KC_VOLD, KC_MUTE, _______, _______, + _______, _______, _______, _______, _______, _______ ), }; -layer_state_t layer_state_set_user(layer_state_t state) { - ML_LED_1(false); - ML_LED_2(false); - ML_LED_3(false); - ML_LED_4(false); - ML_LED_5(false); - ML_LED_6(false); - - switch (get_highest_layer(state)) { - case 1: - ML_LED_1(1); - ML_LED_4(1); - break; - case 2: - ML_LED_2(1); - ML_LED_5(1); - break; - case 3: - ML_LED_3(1); - break; - case 4: - ML_LED_4(1); - break; - case 5: - ML_LED_5(1); - break; - case 6: - ML_LED_6(1); - break; - default: - break; - } - - return state; -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { switch (keycode) { diff --git a/keyboards/moonlander/matrix.c b/keyboards/moonlander/matrix.c index 774b01187..b90c1b59e 100644 --- a/keyboards/moonlander/matrix.c +++ b/keyboards/moonlander/matrix.c @@ -1,6 +1,6 @@ /* Copyright 2020 ZSA Technology Labs, Inc <@zsa> * Copyright 2020 Jack Humbert <jack.humb@gmail.com> - * Copyright 2020 Drashna Jael're <drashna@live.com> + * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/moonlander/moonlander.c b/keyboards/moonlander/moonlander.c index 403e6aef8..39f61b5c4 100644 --- a/keyboards/moonlander/moonlander.c +++ b/keyboards/moonlander/moonlander.c @@ -1,6 +1,6 @@ /* Copyright 2020 ZSA Technology Labs, Inc <@zsa> * Copyright 2020 Jack Humbert <jack.humb@gmail.com> - * Copyright 2020 Drashna Jael're <drashna@live.com> + * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -159,10 +159,10 @@ void keyboard_pre_init_kb(void) { keyboard_pre_init_user(); } -#ifdef ORYX_CONFIGURATOR +#if !defined(MOONLANDER_USER_LEDS) layer_state_t layer_state_set_kb(layer_state_t state) { state = layer_state_set_user(state); - if (is_launching) return state; + if (is_launching || !keyboard_config.led_level) return state; ML_LED_1(false); ML_LED_2(false); @@ -415,6 +415,24 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { if (!record->event.pressed && !webusb_state.pairing) layer_state_set_kb(layer_state); break; #endif +#if !defined(MOONLANDER_USER_LEDS) + case LED_LEVEL: + if (record->event.pressed) { + keyboard_config.led_level ^= 1; + eeconfig_update_kb(keyboard_config.raw); + if (keyboard_config.led_level) { + layer_state_set_kb(layer_state); + } else { + ML_LED_1(false); + ML_LED_2(false); + ML_LED_3(false); + ML_LED_4(false); + ML_LED_5(false); + ML_LED_6(false); + } + } + break; +#endif #ifdef RGB_MATRIX_ENABLE case TOGGLE_LAYER_COLOR: if (record->event.pressed) { @@ -449,6 +467,11 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { void matrix_init_kb(void) { keyboard_config.raw = eeconfig_read_kb(); + if (!keyboard_config.led_level && !keyboard_config.led_level_res) { + keyboard_config.led_level = true; + keyboard_config.led_level_res = 0b11; + eeconfig_update_kb(keyboard_config.raw); + } #ifdef RGB_MATRIX_ENABLE if (keyboard_config.rgb_matrix_enable) { rgb_matrix_set_flags(LED_FLAG_ALL); @@ -461,6 +484,8 @@ void matrix_init_kb(void) { void eeconfig_init_kb(void) { // EEPROM is getting reset! keyboard_config.raw = 0; keyboard_config.rgb_matrix_enable = true; + keyboard_config.led_level = true; + keyboard_config.led_level_res = 0b11; eeconfig_update_kb(keyboard_config.raw); eeconfig_init_user(); } diff --git a/keyboards/moonlander/moonlander.h b/keyboards/moonlander/moonlander.h index 0e2dc880e..08bec5c07 100644 --- a/keyboards/moonlander/moonlander.h +++ b/keyboards/moonlander/moonlander.h @@ -1,6 +1,6 @@ /* Copyright 2020 ZSA Technology Labs, Inc <@zsa> * Copyright 2020 Jack Humbert <jack.humb@gmail.com> - * Copyright 2020 Drashna Jael're <drashna@live.com> + * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -63,6 +63,7 @@ extern bool mcp23018_leds[]; enum planck_ez_keycodes { TOGGLE_LAYER_COLOR = SAFE_RANGE, + LED_LEVEL, ML_SAFE_RANGE, }; @@ -75,6 +76,8 @@ typedef union { struct { bool disable_layer_led :1; bool rgb_matrix_enable :1; + bool led_level :1; + uint8_t led_level_res :2; // DO NOT REMOVE }; } keyboard_config_t; diff --git a/keyboards/niu_mini/keymaps/dyesub/keymap.c b/keyboards/niu_mini/keymaps/dyesub/keymap.c new file mode 100644 index 000000000..d859062d3 --- /dev/null +++ b/keyboards/niu_mini/keymaps/dyesub/keymap.c @@ -0,0 +1,74 @@ + /* Copyright 2020 Chus Jara Peinado + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Layer 0 + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; |Enter | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | Up | ? | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt | " |Layer1| Space |Layer2| - | Left | Down |Right | + * `-----------------------------------------------------------------------------------' + */ + [0] = LAYOUT_planck_mit( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_QUOT, MO(1), KC_SPC, MO(2), KC_MINS, KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* Layer 1 + * ,-----------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | F11 | F12 | | | | | | | | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | |Reset | + * `-----------------------------------------------------------------------------------' + */ + [1] = LAYOUT_planck_mit( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + _______, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET + ), + + /* Layer 2 (r_ Indicates RGB Controls) + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | [ | ] | \ | " | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | - | = | | | Vol+ |PrtScr| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | Vol- | Mute | + * `-----------------------------------------------------------------------------------' + */ + [2] = LAYOUT_planck_mit( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, + _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_BSLS, KC_QUOT, _______, _______, + _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, _______, _______, KC_VOLU, KC_PSCR, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_MUTE + ) +}; diff --git a/keyboards/niu_mini/keymaps/dyesub/readme.md b/keyboards/niu_mini/keymaps/dyesub/readme.md new file mode 100644 index 000000000..e276c4d06 --- /dev/null +++ b/keyboards/niu_mini/keymaps/dyesub/readme.md @@ -0,0 +1,7 @@ +# Dye sub layout + +Simple layout based on the keycaps [DYE SUB](https://kbdfans.com/collections/oem-profile/products/40-layou-dye-sub-keycaps) from KDBFans. + +## Notes +- There is a different ESC key position in this layout. +- The mouse key, backlight and console for debug are disabled (Enable them by just modifying the `rules.mk` file). diff --git a/keyboards/niu_mini/keymaps/dyesub/rules.mk b/keyboards/niu_mini/keymaps/dyesub/rules.mk new file mode 100644 index 000000000..c5f09480a --- /dev/null +++ b/keyboards/niu_mini/keymaps/dyesub/rules.mk @@ -0,0 +1,2 @@ +MOUSEKEY_ENABLE = no +BACKLIGHT_ENABLE = no diff --git a/keyboards/planck/ez/config.h b/keyboards/planck/ez/config.h index 0cb428dd8..91723e185 100644 --- a/keyboards/planck/ez/config.h +++ b/keyboards/planck/ez/config.h @@ -17,6 +17,14 @@ #pragma once +#undef VENDOR_ID +#define VENDOR_ID 0x3297 +#undef PRODUCT_ID +#define PRODUCT_ID 0xC6CE +#undef MANUFACTURER +#define MANUFACTURER ZSA Technology Labs +#undef PRODUCT +#define PRODUCT Planck EZ /* USB Device descriptor parameter */ #define DEVICE_VER 0x0000 diff --git a/keyboards/planck/ez/ez.c b/keyboards/planck/ez/ez.c index 8369ce50c..5371c7853 100644 --- a/keyboards/planck/ez/ez.c +++ b/keyboards/planck/ez/ez.c @@ -18,7 +18,6 @@ #include "hal.h" keyboard_config_t keyboard_config; - #ifdef RGB_MATRIX_ENABLE const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations diff --git a/keyboards/planck/ez/ez.h b/keyboards/planck/ez/ez.h index 352deb647..f989cd938 100644 --- a/keyboards/planck/ez/ez.h +++ b/keyboards/planck/ez/ez.h @@ -17,6 +17,10 @@ #include "planck.h" +#ifdef KEYBOARD_planck_ez_glow +# include "glow.h" +#endif + #define LAYOUT_planck_1x2uC( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ diff --git a/keyboards/planck/ez/glow/config.h b/keyboards/planck/ez/glow/config.h new file mode 100644 index 000000000..21a339da2 --- /dev/null +++ b/keyboards/planck/ez/glow/config.h @@ -0,0 +1,24 @@ +/* + * Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#undef PRODUCT_ID +#define PRODUCT_ID 0xC6CF + +#undef PRODUCT +#define PRODUCT Planck EZ Glow diff --git a/keyboards/planck/ez/glow/glow.c b/keyboards/planck/ez/glow/glow.c new file mode 100644 index 000000000..1813ccae0 --- /dev/null +++ b/keyboards/planck/ez/glow/glow.c @@ -0,0 +1 @@ +#include "glow.h" diff --git a/keyboards/planck/ez/glow/glow.h b/keyboards/planck/ez/glow/glow.h new file mode 100644 index 000000000..d8a01f435 --- /dev/null +++ b/keyboards/planck/ez/glow/glow.h @@ -0,0 +1,3 @@ +#pragma once + +#include "ez.h" diff --git a/keyboards/planck/ez/glow/rules.mk b/keyboards/planck/ez/glow/rules.mk new file mode 100644 index 000000000..575a9c8fa --- /dev/null +++ b/keyboards/planck/ez/glow/rules.mk @@ -0,0 +1 @@ +RGB_MATRIX_ENABLE = IS31FL3737 diff --git a/keyboards/planck/ez/readme.md b/keyboards/planck/ez/readme.md index df8d1b46b..247bf7448 100644 --- a/keyboards/planck/ez/readme.md +++ b/keyboards/planck/ez/readme.md @@ -14,6 +14,12 @@ Make example for this keyboard (after setting up your build environment): See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). +# Planck EZ Glow + +For the per key RGB version of this keyboard, you want to use the "glow" subdirectory. For example: + + make planck/ez/glow:default + ## Planck EZ Configuration (from Oryx) ### Indicator LEDs diff --git a/keyboards/planck/ez/rules.mk b/keyboards/planck/ez/rules.mk index ff4d8daed..cd8354b26 100644 --- a/keyboards/planck/ez/rules.mk +++ b/keyboards/planck/ez/rules.mk @@ -24,10 +24,8 @@ API_SYSEX_ENABLE = no SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = no # Custom matrix file # SERIAL_LINK_ENABLE = yes ENCODER_ENABLE = yes -RGB_MATRIX_ENABLE = IS31FL3737 LAYOUTS = ortho_4x12 planck_mit LAYOUTS_HAS_RGB = no diff --git a/keyboards/planck/keymaps/sigul/keymap.c b/keyboards/planck/keymaps/sigul/keymap.c index b4b983d9c..0bc0d9e03 100644 --- a/keyboards/planck/keymaps/sigul/keymap.c +++ b/keyboards/planck/keymaps/sigul/keymap.c @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | F1 | F2 | F3 | F4 | F5 | | _ | = | | | | + * |Enter | F1 | F2 | F3 | F4 | F5 | | _ | = | | | | * |------+------+------+------+------+------|------+------+------+------+------+------| * | | F6 | F7 | F8 | F9 | |NUMPAD| | | { | } | | | * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = LAYOUT_ortho_4x12( IT_TILDE, IT_EXLM, IT_AT, IT_SHRP, IT_DLR, IT_PERC, IT_CRC, IT_AMPR, IT_ASTR, IT_LPRN, IT_RPRN, KC_DEL, - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, S(IT_MINS), IT_EQL, S(IT_EACC), IT_OACC, IT_AACC, + KC_ENT, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, S(IT_MINS), IT_EQL, S(IT_EACC), IT_OACC, IT_AACC, _______, KC_F6, KC_F7, KC_F8, KC_F9, _______, NUMPAD, S(IT_UACC), IT_PLMN, IT_LCBR, IT_RCBR, IT_PIPE, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY ), @@ -68,8 +68,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_RAISE] = LAYOUT_ortho_4x12( IT_GRAVE, IT_1, IT_2, IT_3, IT_4, IT_5, IT_6, IT_7, IT_8, IT_9, IT_0, _______, - _______, _______, SECRET2, SECRET1, _______, _______, _______, IT_MINS, IT_PLUS, IT_EACC, IT_IACC, IT_UACC, - KC_CAPS, _______, SECRET0, SECRET3, SECRET4, _______, NUMPAD, _______, _______, IT_LBRC, IT_RBRC, IT_BSLS, + _______, _______, SECRET0, SECRET1, _______, _______, _______, IT_MINS, IT_PLUS, IT_EACC, IT_IACC, IT_UACC, + KC_CAPS, _______, SECRET2, SECRET3, SECRET4, _______, NUMPAD, SECRET5, _______, IT_LBRC, IT_RBRC, IT_BSLS, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END ), diff --git a/keyboards/tkc/candybar/bootloader_defs.h b/keyboards/tkc/candybar/bootloader_defs.h deleted file mode 100644 index 43eb7b2f6..000000000 --- a/keyboards/tkc/candybar/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/wolfmarkclub/wm1/bootloader_defs.h b/keyboards/wolfmarkclub/wm1/bootloader_defs.h deleted file mode 100644 index 393d70fdc..000000000 --- a/keyboards/wolfmarkclub/wm1/bootloader_defs.h +++ /dev/null @@ -1,11 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ - -// STM32F103 does not have a USB bootloader in ROM -- the WM1 -// has a usermode USB mass storage device bootloader at the normal -// boot address -- `0x08000000`. -#define STM32_BOOTLOADER_ADDRESS 0x80000000 diff --git a/keyboards/wolfmarkclub/wm1/rules.mk b/keyboards/wolfmarkclub/wm1/rules.mk index fcd4da1af..9394bbd71 100644 --- a/keyboards/wolfmarkclub/wm1/rules.mk +++ b/keyboards/wolfmarkclub/wm1/rules.mk @@ -1,11 +1,13 @@ # MCU name MCU = STM32F103 +# Bootloader selection +BOOTLOADER = stm32duino + # GENERIC STM32F103C8T6 board - mass storage bootloader MCU_LDSCRIPT = wm1_f103 -BOARD = STM32_F103_STM32DUINO -PROGRAM_CMD=echo 'CLI flashing not supported' >&2 +PROGRAM_CMD = echo 'CLI flashing not supported' >&2 # Build Options # change yes to no to disable diff --git a/keyboards/xd68/keymaps/via/keymap.c b/keyboards/xd68/keymaps/via/keymap.c index 6ffed7750..64be6af3b 100644 --- a/keyboards/xd68/keymaps/via/keymap.c +++ b/keyboards/xd68/keymaps/via/keymap.c @@ -1,5 +1,8 @@ #include QMK_KEYBOARD_H +#define _BL 0 +#define _FL 1 + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: (Base Layer) Default Layer * ,----------------------------------------------------------------. @@ -7,19 +10,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |----------------------------------------------------------------| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |PgUp| * |----------------------------------------------------------------| - * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgDn| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|#| Rtrn|PgDn| * |----------------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|End | + * |Shift| \| Z| X| C| V| B| N| M| ,| .| /|Shift | Up|End | * |----------------------------------------------------------------| - * |Ctrl|Win |Alt | Space |App|Ctrl|FN |Lef|Dow|Rig | + * |Ctrl|Win |Alt | Space |Alt|FN |Ctrl|Lef|Dow|Rig | * `----------------------------------------------------------------' */ - [0] = LAYOUT_65_ansi( + [_BL] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_APP, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), /* Keymap _FL: Function Layer @@ -35,27 +38,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |HUD |SAD |VAD | RGB_Tog | | | | <M|V- |M> | * `----------------------------------------------------------------' */ - [1] = LAYOUT_65_ansi( + [_FL] = LAYOUT_all( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, RESET, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + RGB_HUI, _______, RGB_SAI, RGB_VAI, RGB_MOD, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE, RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, _______, _______, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT - ), - - [2] = LAYOUT_65_ansi( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - - [3] = LAYOUT_65_ansi( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), + ) }; diff --git a/keyboards/xd68/rules.mk b/keyboards/xd68/rules.mk index c8b7950c9..8d52ba327 100644 --- a/keyboards/xd68/rules.mk +++ b/keyboards/xd68/rules.mk @@ -32,4 +32,4 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs UNICODE_ENABLE = no # Unicode -LAYOUTS = 65_ansi 65_iso
\ No newline at end of file +LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/xd68/xd68.h b/keyboards/xd68/xd68.h index 2916d72d4..f4347928f 100755 --- a/keyboards/xd68/xd68.h +++ b/keyboards/xd68/xd68.h @@ -6,6 +6,38 @@ // readability #define XXX KC_NO +/* XD68 ALL (VIA) layout + * ,----------------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | 0e | + * |----------------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | 1e | + * |----------------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c| 2d| 2e | + * |----------------------------------------------------------------| + * | 30 |31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c| 3d| 3e | + * |----------------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 48| 4a| 4b| 4c| 4d| 4e | + * `----------------------------------------------------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k45, k48, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, k4b, XXX, k48, k4a, k4c, k4d, k4e} \ +} + + /* XD68 ANSI layout * ,----------------------------------------------------------------. * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | 0e | diff --git a/keyboards/xelus/trinityxttkl/bootloader_defs.h b/keyboards/xelus/trinityxttkl/bootloader_defs.h deleted file mode 100644 index 02c48c4e6..000000000 --- a/keyboards/xelus/trinityxttkl/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/zvecr/split_blackpill/rules.mk b/keyboards/zvecr/split_blackpill/rules.mk index 6feec7dd9..55bca894e 100644 --- a/keyboards/zvecr/split_blackpill/rules.mk +++ b/keyboards/zvecr/split_blackpill/rules.mk @@ -1,13 +1,8 @@ # MCU name MCU = STM32F103 -# GENERIC STM32F103C8T6 board - stm32duino bootloader -MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader -BOARD = STM32_F103_STM32DUINO -STM32_BOOTLOADER_ADDRESS = 0x80000000 - -DFU_ARGS = -d 1eaf:0003 -a2 -R -DFU_SUFFIX_ARGS = -v 1eaf -p 0003 +# Bootloader selection +BOOTLOADER = stm32duino # Build Options # change yes to no to disable diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index 47f60c601..ba964ebbb 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -6,6 +6,7 @@ import sys from milc import cli +from . import c2json from . import cformat from . import compile from . import config diff --git a/lib/python/qmk/cli/c2json.py b/lib/python/qmk/cli/c2json.py new file mode 100644 index 000000000..0267303fd --- /dev/null +++ b/lib/python/qmk/cli/c2json.py @@ -0,0 +1,62 @@ +"""Generate a keymap.json from a keymap.c file. +""" +import json +import sys + +from milc import cli + +import qmk.keymap +import qmk.path + + +@cli.argument('--no-cpp', arg_only=True, action='store_false', help='Do not use \'cpp\' on keymap.c') +@cli.argument('-o', '--output', arg_only=True, type=qmk.path.normpath, help='File to write to') +@cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages") +@cli.argument('-kb', '--keyboard', arg_only=True, required=True, help='The keyboard\'s name') +@cli.argument('-km', '--keymap', arg_only=True, required=True, help='The keymap\'s name') +@cli.argument('filename', arg_only=True, help='keymap.c file') +@cli.subcommand('Creates a keymap.json from a keymap.c file.') +def c2json(cli): + """Generate a keymap.json from a keymap.c file. + + This command uses the `qmk.keymap` module to generate a keymap.json from a keymap.c file. The generated keymap is written to stdout, or to a file if -o is provided. + """ + cli.args.filename = qmk.path.normpath(cli.args.filename) + + # Error checking + if not cli.args.filename.exists(): + cli.log.error('C file does not exist!') + cli.print_usage() + exit(1) + + if str(cli.args.filename) == '-': + # TODO(skullydazed/anyone): Read file contents from STDIN + cli.log.error('Reading from STDIN is not (yet) supported.') + cli.print_usage() + exit(1) + + # Environment processing + if cli.args.output == ('-'): + cli.args.output = None + + # Parse the keymap.c + keymap_json = qmk.keymap.c2json(cli.args.keyboard, cli.args.keymap, cli.args.filename, use_cpp=cli.args.no_cpp) + + # Generate the keymap.json + try: + keymap_json = qmk.keymap.generate(keymap_json['keyboard'], keymap_json['layout'], keymap_json['layers'], type='json', keymap=keymap_json['keymap']) + except KeyError: + cli.log.error('Something went wrong. Try to use --no-cpp.') + sys.exit(1) + + if cli.args.output: + cli.args.output.parent.mkdir(parents=True, exist_ok=True) + if cli.args.output.exists(): + cli.args.output.replace(cli.args.output.name + '.bak') + cli.args.output.write_text(json.dumps(keymap_json)) + + if not cli.args.quiet: + cli.log.info('Wrote keymap to %s.', cli.args.output) + + else: + print(json.dumps(keymap_json)) diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index bad864f72..7fafd5757 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -58,7 +58,7 @@ def parse_gcc_version(version): return { 'major': int(m.group(1)), 'minor': int(m.group(2)) if m.group(2) else 0, - 'patch': int(m.group(3)) if m.group(3) else 0 + 'patch': int(m.group(3)) if m.group(3) else 0, } @@ -364,3 +364,5 @@ def doctor(cli): else: cli.log.info('{fg_yellow}Problems detected, please fix these problems before proceeding.') # FIXME(skullydazed/unclaimed): Link to a document about troubleshooting, or discord or something + + return ok diff --git a/lib/python/qmk/cli/info.py b/lib/python/qmk/cli/info.py index 5e4b39141..0e64d4074 100755 --- a/lib/python/qmk/cli/info.py +++ b/lib/python/qmk/cli/info.py @@ -134,11 +134,11 @@ def info(cli): if not cli.config.info.keyboard: cli.log.error('Missing paramater: --keyboard') cli.subcommands['info'].print_help() - exit(1) + return False if not is_keyboard(cli.config.info.keyboard): cli.log.error('Invalid keyboard: "%s"', cli.config.info.keyboard) - exit(1) + return False # Build the info.json file kb_info_json = info_json(cli.config.info.keyboard) @@ -146,13 +146,10 @@ def info(cli): # Output in the requested format if cli.args.format == 'json': print(json.dumps(kb_info_json)) - exit() - - if cli.args.format == 'text': + elif cli.args.format == 'text': print_text_output(kb_info_json) - elif cli.args.format == 'friendly': print_friendly_output(kb_info_json) - else: cli.log.error('Unknown format: %s', cli.args.format) + return False diff --git a/lib/python/qmk/cli/json/keymap.py b/lib/python/qmk/cli/json/keymap.py index c97a2d046..2af9faaa7 100755 --- a/lib/python/qmk/cli/json/keymap.py +++ b/lib/python/qmk/cli/json/keymap.py @@ -13,4 +13,4 @@ def json_keymap(cli): """Renamed to `qmk json2c`. """ cli.log.error('This command has been renamed to `qmk json2c`.') - exit(1) + return False diff --git a/lib/python/qmk/cli/json2c.py b/lib/python/qmk/cli/json2c.py index af0d80a9a..2a9009436 100755 --- a/lib/python/qmk/cli/json2c.py +++ b/lib/python/qmk/cli/json2c.py @@ -22,12 +22,12 @@ def json2c(cli): # TODO(skullydazed/anyone): Read file contents from STDIN cli.log.error('Reading from STDIN is not (yet) supported.') cli.print_usage() - exit(1) + return False if not cli.args.filename.exists(): cli.log.error('JSON file does not exist!') cli.print_usage() - exit(1) + return False # Environment processing if cli.args.output and cli.args.output.name == '-': diff --git a/lib/python/qmk/cli/kle2json.py b/lib/python/qmk/cli/kle2json.py index 798f95fd1..3d1bb8c43 100755 --- a/lib/python/qmk/cli/kle2json.py +++ b/lib/python/qmk/cli/kle2json.py @@ -37,7 +37,8 @@ def kle2json(cli): file_path = Path(os.environ['ORIG_CWD'], cli.args.filename) # Check for valid file_path for more graceful failure if not file_path.exists(): - return cli.log.error('File {fg_cyan}%s{style_reset_all} was not found.', file_path) + cli.log.error('File {fg_cyan}%s{style_reset_all} was not found.', file_path) + return False out_path = file_path.parent raw_code = file_path.open().read() # Check if info.json exists, allow overwrite with force @@ -50,8 +51,7 @@ def kle2json(cli): except Exception as e: cli.log.error('Could not parse KLE raw data: %s', raw_code) cli.log.exception(e) - # FIXME: This should be better - return cli.log.error('Could not parse KLE raw data.') + return False keyboard = OrderedDict( keyboard_name=kle.name, url='', diff --git a/lib/python/qmk/cli/list/keymaps.py b/lib/python/qmk/cli/list/keymaps.py index b18289eb3..49bc84b2c 100644 --- a/lib/python/qmk/cli/list/keymaps.py +++ b/lib/python/qmk/cli/list/keymaps.py @@ -15,7 +15,7 @@ def list_keymaps(cli): """ if not is_keyboard(cli.config.list_keymaps.keyboard): cli.log.error('Keyboard %s does not exist!', cli.config.list_keymaps.keyboard) - exit(1) + return False for name in qmk.keymap.list_keymaps(cli.config.list_keymaps.keyboard): print(name) diff --git a/lib/python/qmk/cli/new/keymap.py b/lib/python/qmk/cli/new/keymap.py index 474fe7974..52c564997 100755 --- a/lib/python/qmk/cli/new/keymap.py +++ b/lib/python/qmk/cli/new/keymap.py @@ -29,15 +29,15 @@ def new_keymap(cli): # check directories if not kb_path.exists(): cli.log.error('Keyboard %s does not exist!', kb_path) - exit(1) + return False if not keymap_path_default.exists(): cli.log.error('Keyboard default %s does not exist!', keymap_path_default) - exit(1) + return False if keymap_path_new.exists(): cli.log.error('Keymap %s already exists!', keymap_path_new) - exit(1) + return False # create user directory with default keymap files shutil.copytree(keymap_path_default, keymap_path_new, symlinks=True) diff --git a/lib/python/qmk/commands.py b/lib/python/qmk/commands.py index 4db4667a8..5a6e60988 100644 --- a/lib/python/qmk/commands.py +++ b/lib/python/qmk/commands.py @@ -7,7 +7,6 @@ import subprocess import shlex import shutil -from milc import cli import qmk.keymap @@ -84,6 +83,4 @@ def run(command, *args, **kwargs): safecmd = ' '.join(safecmd) command = [os.environ['SHELL'], '-c', safecmd] - cli.log.debug('Running command: %s', command) - return subprocess.run(command, *args, **kwargs) diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 0450724df..102111d7c 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -9,7 +9,6 @@ QMK_FIRMWARE = Path.cwd() MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -ARM_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411' -AVR_PROCESSORS = 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', 'atmega328p', 'atmega32a', None -ALL_PROCESSORS = ARM_PROCESSORS + AVR_PROCESSORS -VUSB_PROCESSORS = 'atmega328p', 'atmega32a', 'atmega328', 'attiny85' +CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411' +LUFA_PROCESSORS = 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None +VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index de7632e37..15a5c097a 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -6,15 +6,22 @@ from pathlib import Path from milc import cli -from qmk.constants import ARM_PROCESSORS, AVR_PROCESSORS, VUSB_PROCESSORS +from qmk.constants import CHIBIOS_PROCESSORS, LUFA_PROCESSORS, VUSB_PROCESSORS from qmk.c_parse import find_layouts from qmk.keyboard import config_h, rules_mk +from qmk.makefile import parse_rules_mk_file from qmk.math import compute def info_json(keyboard): """Generate the info.json data for a specific keyboard. """ + cur_dir = Path('keyboards') + rules = parse_rules_mk_file(cur_dir / keyboard / 'rules.mk') + if 'DEFAULT_FOLDER' in rules: + keyboard = rules['DEFAULT_FOLDER'] + rules = parse_rules_mk_file(cur_dir / keyboard / 'rules.mk', rules) + info_data = { 'keyboard_name': str(keyboard), 'keyboard_folder': str(keyboard), @@ -22,7 +29,7 @@ def info_json(keyboard): 'maintainer': 'qmk', } - for layout_name, layout_json in _find_all_layouts(keyboard).items(): + for layout_name, layout_json in _find_all_layouts(keyboard, rules).items(): if not layout_name.startswith('LAYOUT_kc'): info_data['layouts'][layout_name] = layout_json @@ -88,9 +95,9 @@ def _extract_rules_mk(info_data): rules = rules_mk(info_data['keyboard_folder']) mcu = rules.get('MCU') - if mcu in ARM_PROCESSORS: + if mcu in CHIBIOS_PROCESSORS: arm_processor_rules(info_data, rules) - elif mcu in AVR_PROCESSORS: + elif mcu in LUFA_PROCESSORS + VUSB_PROCESSORS: avr_processor_rules(info_data, rules) else: cli.log.warning("%s: Unknown MCU: %s" % (info_data['keyboard_folder'], mcu)) @@ -99,22 +106,24 @@ def _extract_rules_mk(info_data): return info_data -def _find_all_layouts(keyboard): - """Looks for layout macros associated with this keyboard. - """ - layouts = {} - rules = rules_mk(keyboard) - keyboard_path = Path(rules.get('DEFAULT_FOLDER', keyboard)) - - # Pull in all layouts defined in the standard files +def _search_keyboard_h(path): current_path = Path('keyboards/') - for directory in keyboard_path.parts: + layouts = {} + for directory in path.parts: current_path = current_path / directory keyboard_h = '%s.h' % (directory,) keyboard_h_path = current_path / keyboard_h if keyboard_h_path.exists(): layouts.update(find_layouts(keyboard_h_path)) + return layouts + + +def _find_all_layouts(keyboard, rules): + """Looks for layout macros associated with this keyboard. + """ + layouts = _search_keyboard_h(Path(keyboard)) + if not layouts: # If we didn't find any layouts above we widen our search. This is error # prone which is why we want to encourage people to follow the standard above. diff --git a/lib/python/qmk/keymap.py b/lib/python/qmk/keymap.py index 78510a8a7..166697ee6 100644 --- a/lib/python/qmk/keymap.py +++ b/lib/python/qmk/keymap.py @@ -1,11 +1,18 @@ """Functions that help you work with QMK keymaps. """ from pathlib import Path +import json +import subprocess + +from pygments.lexers.c_cpp import CLexer +from pygments.token import Token +from pygments import lex from milc import cli from qmk.keyboard import rules_mk import qmk.path +import qmk.commands # The `keymap.c` template to use when a keyboard doesn't have its own DEFAULT_KEYMAP_C = """#include QMK_KEYBOARD_H @@ -22,22 +29,35 @@ __KEYMAP_GOES_HERE__ """ -def template(keyboard): - """Returns the `keymap.c` template for a keyboard. +def template(keyboard, type='c'): + """Returns the `keymap.c` or `keymap.json` template for a keyboard. If a template exists in `keyboards/<keyboard>/templates/keymap.c` that text will be used instead of `DEFAULT_KEYMAP_C`. + If a template exists in `keyboards/<keyboard>/templates/keymap.json` that + text will be used instead of an empty dictionary. + Args: keyboard The keyboard to return a template for. - """ - template_file = Path('keyboards/%s/templates/keymap.c' % keyboard) - if template_file.exists(): - return template_file.read_text() + type + 'json' for `keymap.json` and 'c' (or anything else) for `keymap.c` + """ + if type == 'json': + template_file = Path('keyboards/%s/templates/keymap.json' % keyboard) + template = {'keyboard': keyboard} + if template_file.exists(): + template.update(json.loads(template_file.read_text())) + else: + template_file = Path('keyboards/%s/templates/keymap.c' % keyboard) + if template_file.exists(): + template = template_file.read_text() + else: + template = DEFAULT_KEYMAP_C - return DEFAULT_KEYMAP_C + return template def _strip_any(keycode): @@ -57,8 +77,8 @@ def is_keymap_dir(keymap): return True -def generate(keyboard, layout, layers): - """Returns a keymap.c for the specified keyboard, layout, and layers. +def generate(keyboard, layout, layers, type='c', keymap=None): + """Returns a `keymap.c` or `keymap.json` for the specified keyboard, layout, and layers. Args: keyboard @@ -69,24 +89,32 @@ def generate(keyboard, layout, layers): layers An array of arrays describing the keymap. Each item in the inner array should be a string that is a valid QMK keycode. - """ - layer_txt = [] - for layer_num, layer in enumerate(layers): - if layer_num != 0: - layer_txt[-1] = layer_txt[-1] + ',' + type + 'json' for `keymap.json` and 'c' (or anything else) for `keymap.c` + """ + new_keymap = template(keyboard, type) + if type == 'json': + new_keymap['keymap'] = keymap + new_keymap['layout'] = layout + new_keymap['layers'] = layers + else: + layer_txt = [] + for layer_num, layer in enumerate(layers): + if layer_num != 0: + layer_txt[-1] = layer_txt[-1] + ',' - layer = map(_strip_any, layer) - layer_keys = ', '.join(layer) - layer_txt.append('\t[%s] = %s(%s)' % (layer_num, layout, layer_keys)) + layer = map(_strip_any, layer) + layer_keys = ', '.join(layer) + layer_txt.append('\t[%s] = %s(%s)' % (layer_num, layout, layer_keys)) - keymap = '\n'.join(layer_txt) - keymap_c = template(keyboard) + keymap = '\n'.join(layer_txt) + new_keymap = new_keymap.replace('__KEYMAP_GOES_HERE__', keymap) - return keymap_c.replace('__KEYMAP_GOES_HERE__', keymap) + return new_keymap -def write(keyboard, keymap, layout, layers): +def write(keyboard, keymap, layout, layers, type='c'): """Generate the `keymap.c` and write it to disk. Returns the filename written to. @@ -103,12 +131,19 @@ def write(keyboard, keymap, layout, layers): layers An array of arrays describing the keymap. Each item in the inner array should be a string that is a valid QMK keycode. + + type + 'json' for `keymap.json` and 'c' (or anything else) for `keymap.c` """ - keymap_c = generate(keyboard, layout, layers) - keymap_file = qmk.path.keymap(keyboard) / keymap / 'keymap.c' + keymap_content = generate(keyboard, layout, layers, type) + if type == 'json': + keymap_file = qmk.path.keymap(keyboard) / keymap / 'keymap.json' + keymap_content = json.dumps(keymap_content) + else: + keymap_file = qmk.path.keymap(keyboard) / keymap / 'keymap.c' keymap_file.parent.mkdir(parents=True, exist_ok=True) - keymap_file.write_text(keymap_c) + keymap_file.write_text(keymap_content) cli.log.info('Wrote keymap to {fg_cyan}%s', keymap_file) @@ -188,3 +223,192 @@ def list_keymaps(keyboard): names = names.union([keymap.name for keymap in cl_path.iterdir() if is_keymap_dir(keymap)]) return sorted(names) + + +def _c_preprocess(path): + """ Run a file through the C pre-processor + + Args: + path: path of the keymap.c file + + Returns: + the stdout of the pre-processor + """ + pre_processed_keymap = qmk.commands.run(['cpp', path], stdout=subprocess.PIPE, stderr=subprocess.PIPE, universal_newlines=True) + return pre_processed_keymap.stdout + + +def _get_layers(keymap): # noqa C901 : until someone has a good idea how to simplify/split up this code + """ Find the layers in a keymap.c file. + + Args: + keymap: the content of the keymap.c file + + Returns: + a dictionary containing the parsed keymap + """ + layers = list() + opening_braces = '({[' + closing_braces = ')}]' + keymap_certainty = brace_depth = 0 + is_keymap = is_layer = is_adv_kc = False + layer = dict(name=False, layout=False, keycodes=list()) + for line in lex(keymap, CLexer()): + if line[0] is Token.Name: + if is_keymap: + # If we are inside the keymap array + # we know the keymap's name and the layout macro will come, + # followed by the keycodes + if not layer['name']: + if line[1].startswith('LAYOUT') or line[1].startswith('KEYMAP'): + # This can happen if the keymap array only has one layer, + # for macropads and such + layer['name'] = '0' + layer['layout'] = line[1] + else: + layer['name'] = line[1] + elif not layer['layout']: + layer['layout'] = line[1] + elif is_layer: + # If we are inside a layout macro, + # collect all keycodes + if line[1] == '_______': + kc = 'KC_TRNS' + elif line[1] == 'XXXXXXX': + kc = 'KC_NO' + else: + kc = line[1] + if is_adv_kc: + # If we are inside an advanced keycode + # collect everything and hope the user + # knew what he/she was doing + layer['keycodes'][-1] += kc + else: + layer['keycodes'].append(kc) + + # The keymaps array's signature: + # const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] + # + # Only if we've found all 6 keywords in this specific order + # can we know for sure that we are inside the keymaps array + elif line[1] == 'PROGMEM' and keymap_certainty == 2: + keymap_certainty = 3 + elif line[1] == 'keymaps' and keymap_certainty == 3: + keymap_certainty = 4 + elif line[1] == 'MATRIX_ROWS' and keymap_certainty == 4: + keymap_certainty = 5 + elif line[1] == 'MATRIX_COLS' and keymap_certainty == 5: + keymap_certainty = 6 + elif line[0] is Token.Keyword: + if line[1] == 'const' and keymap_certainty == 0: + keymap_certainty = 1 + elif line[0] is Token.Keyword.Type: + if line[1] == 'uint16_t' and keymap_certainty == 1: + keymap_certainty = 2 + elif line[0] is Token.Punctuation: + if line[1] in opening_braces: + brace_depth += 1 + if is_keymap: + if is_layer: + # We found the beginning of a non-basic keycode + is_adv_kc = True + layer['keycodes'][-1] += line[1] + elif line[1] == '(' and brace_depth == 2: + # We found the beginning of a layer + is_layer = True + elif line[1] == '{' and keymap_certainty == 6: + # We found the beginning of the keymaps array + is_keymap = True + elif line[1] in closing_braces: + brace_depth -= 1 + if is_keymap: + if is_adv_kc: + layer['keycodes'][-1] += line[1] + if brace_depth == 2: + # We found the end of a non-basic keycode + is_adv_kc = False + elif line[1] == ')' and brace_depth == 1: + # We found the end of a layer + is_layer = False + layers.append(layer) + layer = dict(name=False, layout=False, keycodes=list()) + elif line[1] == '}' and brace_depth == 0: + # We found the end of the keymaps array + is_keymap = False + keymap_certainty = 0 + elif is_adv_kc: + # Advanced keycodes can contain other punctuation + # e.g.: MT(MOD_LCTL | MOD_LSFT, KC_ESC) + layer['keycodes'][-1] += line[1] + + elif line[0] is Token.Literal.Number.Integer and is_keymap and not is_adv_kc: + # If the pre-processor finds the 'meaning' of the layer names, + # they will be numbers + if not layer['name']: + layer['name'] = line[1] + + else: + # We only care about + # operators and such if we + # are inside an advanced keycode + # e.g.: MT(MOD_LCTL | MOD_LSFT, KC_ESC) + if is_adv_kc: + layer['keycodes'][-1] += line[1] + + return layers + + +def parse_keymap_c(keymap_file, use_cpp=True): + """ Parse a keymap.c file. + + Currently only cares about the keymaps array. + + Args: + keymap_file: path of the keymap.c file + + use_cpp: if True, pre-process the file with the C pre-processor + + Returns: + a dictionary containing the parsed keymap + """ + if use_cpp: + keymap_file = _c_preprocess(keymap_file) + else: + keymap_file = keymap_file.read_text() + + keymap = dict() + keymap['layers'] = _get_layers(keymap_file) + return keymap + + +def c2json(keyboard, keymap, keymap_file, use_cpp=True): + """ Convert keymap.c to keymap.json + + Args: + keyboard: The name of the keyboard + + keymap: The name of the keymap + + layout: The LAYOUT macro this keymap uses. + + keymap_file: path of the keymap.c file + + use_cpp: if True, pre-process the file with the C pre-processor + + Returns: + a dictionary in keymap.json format + """ + keymap_json = parse_keymap_c(keymap_file, use_cpp) + + dirty_layers = keymap_json.pop('layers', None) + keymap_json['layers'] = list() + for layer in dirty_layers: + layer.pop('name') + layout = layer.pop('layout') + if not keymap_json.get('layout', False): + keymap_json['layout'] = layout + keymap_json['layers'].append(layer.pop('keycodes')) + + keymap_json['keyboard'] = keyboard + keymap_json['keymap'] = keymap + return keymap_json diff --git a/lib/python/qmk/tests/.gitignore b/lib/python/qmk/tests/.gitignore new file mode 100644 index 000000000..eeb6581b8 --- /dev/null +++ b/lib/python/qmk/tests/.gitignore @@ -0,0 +1,2 @@ +# Ignore generated info.json from pytest +info.json diff --git a/lib/python/qmk/tests/test_cli_commands.py b/lib/python/qmk/tests/test_cli_commands.py index 68f8ed604..7ac0bcbde 100644 --- a/lib/python/qmk/tests/test_cli_commands.py +++ b/lib/python/qmk/tests/test_cli_commands.py @@ -1,10 +1,11 @@ -import subprocess +from subprocess import STDOUT, PIPE + from qmk.commands import run def check_subcommand(command, *args): cmd = ['bin/qmk', command] + list(args) - result = run(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT, universal_newlines=True) + result = run(cmd, stdout=PIPE, stderr=STDOUT, universal_newlines=True) return result @@ -28,6 +29,11 @@ def test_compile(): check_returncode(result) +def test_compile_json(): + result = check_subcommand('compile', '-kb', 'handwired/onekey/pytest', '-km', 'default_json') + check_returncode(result) + + def test_flash(): result = check_subcommand('flash', '-kb', 'handwired/onekey/pytest', '-km', 'default', '-n') check_returncode(result) @@ -45,8 +51,9 @@ def test_config(): def test_kle2json(): - result = check_subcommand('kle2json', 'kle.txt', '-f') + result = check_subcommand('kle2json', 'lib/python/qmk/tests/kle.txt', '-f') check_returncode(result) + assert 'Wrote out' in result.stdout def test_doctor(): @@ -152,3 +159,15 @@ def test_info_matrix_render(): assert 'LAYOUT_ortho_1x1' in result.stdout assert '│0A│' in result.stdout assert 'Matrix for "LAYOUT_ortho_1x1"' in result.stdout + + +def test_c2json(): + result = check_subcommand("c2json", "-kb", "handwired/onekey/pytest", "-km", "default", "keyboards/handwired/onekey/keymaps/default/keymap.c") + check_returncode(result) + assert result.stdout.strip() == '{"keyboard": "handwired/onekey/pytest", "documentation": "This file is a keymap.json file for handwired/onekey/pytest", "keymap": "default", "layout": "LAYOUT_ortho_1x1", "layers": [["KC_A"]]}' + + +def test_c2json_nocpp(): + result = check_subcommand("c2json", "--no-cpp", "-kb", "handwired/onekey/pytest", "-km", "default", "keyboards/handwired/onekey/keymaps/pytest_nocpp/keymap.c") + check_returncode(result) + assert result.stdout.strip() == '{"keyboard": "handwired/onekey/pytest", "documentation": "This file is a keymap.json file for handwired/onekey/pytest", "keymap": "default", "layout": "LAYOUT", "layers": [["KC_ENTER"]]}' diff --git a/lib/python/qmk/tests/test_qmk_keymap.py b/lib/python/qmk/tests/test_qmk_keymap.py index d8669e549..7ef708e0d 100644 --- a/lib/python/qmk/tests/test_qmk_keymap.py +++ b/lib/python/qmk/tests/test_qmk_keymap.py @@ -6,14 +6,34 @@ def test_template_onekey_proton_c(): assert templ == qmk.keymap.DEFAULT_KEYMAP_C +def test_template_onekey_proton_c_json(): + templ = qmk.keymap.template('handwired/onekey/proton_c', type='json') + assert templ == {'keyboard': 'handwired/onekey/proton_c'} + + def test_template_onekey_pytest(): templ = qmk.keymap.template('handwired/onekey/pytest') assert templ == '#include QMK_KEYBOARD_H\nconst uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {__KEYMAP_GOES_HERE__};\n' +def test_template_onekey_pytest_json(): + templ = qmk.keymap.template('handwired/onekey/pytest', type='json') + assert templ == {'keyboard': 'handwired/onekey/pytest', "documentation": "This file is a keymap.json file for handwired/onekey/pytest"} + + def test_generate_onekey_pytest(): templ = qmk.keymap.generate('handwired/onekey/pytest', 'LAYOUT', [['KC_A']]) assert templ == '#include QMK_KEYBOARD_H\nconst uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\t[0] = LAYOUT(KC_A)};\n' +def test_generate_onekey_pytest_json(): + templ = qmk.keymap.generate('handwired/onekey/pytest', 'LAYOUT', [['KC_A']], type='json', keymap='default') + assert templ == {"keyboard": "handwired/onekey/pytest", "documentation": "This file is a keymap.json file for handwired/onekey/pytest", "keymap": "default", "layout": "LAYOUT", "layers": [["KC_A"]]} + + +def test_parse_keymap_c(): + parsed_keymap_c = qmk.keymap.parse_keymap_c('keyboards/handwired/onekey/keymaps/default/keymap.c') + assert parsed_keymap_c == {'layers': [{'name': '0', 'layout': 'LAYOUT_ortho_1x1', 'keycodes': ['KC_A']}]} + + # FIXME(skullydazed): Add a test for qmk.keymap.write that mocks up an FD. diff --git a/quantum/keymap_extras/sendstring_french.h b/quantum/keymap_extras/sendstring_french.h index 17ea3ed45..ab65f28eb 100644 --- a/quantum/keymap_extras/sendstring_french.h +++ b/quantum/keymap_extras/sendstring_french.h @@ -74,13 +74,13 @@ const uint8_t ascii_to_keycode_lut[128] PROGMEM = { XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, // ! " # $ % & ' - KC_SPC, FR_EXLM, FR_QUOT, FR_DQUO, FR_DLR, FR_UGRV, FR_AMPR, FR_QUOT, + KC_SPC, FR_EXLM, FR_DQUO, FR_DQUO, FR_DLR, FR_UGRV, FR_AMPR, FR_QUOT, // ( ) * + , - . / FR_LPRN, FR_RPRN, FR_ASTR, FR_EQL, FR_COMM, FR_MINS, FR_SCLN, FR_COLN, // 0 1 2 3 4 5 6 7 FR_AGRV, FR_AMPR, FR_EACU, FR_DQUO, FR_QUOT, FR_LPRN, FR_MINS, FR_EGRV, // 8 9 : ; < = > ? - FR_CCED, FR_AGRV, FR_COLN, FR_SCLN, FR_LABK, FR_EQL, FR_LABK, FR_COMM, + FR_UNDS, FR_CCED, FR_COLN, FR_SCLN, FR_LABK, FR_EQL, FR_LABK, FR_COMM, // @ A B C D E F G FR_AGRV, FR_A, FR_B, FR_C, FR_D, FR_E, FR_F, FR_G, // H I J K L M N O diff --git a/quantum/process_keycode/process_rgb.c b/quantum/process_keycode/process_rgb.c index e0c62465f..5dd8e7809 100644 --- a/quantum/process_keycode/process_rgb.c +++ b/quantum/process_keycode/process_rgb.c @@ -23,7 +23,7 @@ typedef void (*rgb_func_pointer)(void); * * noinline to optimise for firmware size not speed (not in hot path) */ -#if !(defined(RGBLIGHT_DISABLE_KEYCODES) || defined(RGB_MATRIX_DISABLE_KEYCODES)) +#if (defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_DISABLE_KEYCODES)) || (defined(RGB_MATRIX_ENABLE) && !defined(RGB_MATRIX_DISABLE_KEYCODES)) static void __attribute__((noinline)) handleKeycodeRGB(const uint8_t is_shifted, const rgb_func_pointer inc_func, const rgb_func_pointer dec_func) { if (is_shifted) { dec_func(); @@ -58,7 +58,7 @@ bool process_rgb(const uint16_t keycode, const keyrecord_t *record) { // Split keyboards need to trigger on key-up for edge-case issue if (!record->event.pressed) { #endif -#if !(defined(RGBLIGHT_DISABLE_KEYCODES) || defined(RGB_MATRIX_DISABLE_KEYCODES)) +#if (defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_DISABLE_KEYCODES)) || (defined(RGB_MATRIX_ENABLE) && !defined(RGB_MATRIX_DISABLE_KEYCODES)) uint8_t shifted = get_mods() & MOD_MASK_SHIFT; #endif switch (keycode) { diff --git a/requirements.txt b/requirements.txt index aa6ee1ba3..d20803577 100644 --- a/requirements.txt +++ b/requirements.txt @@ -4,3 +4,4 @@ appdirs argcomplete colorama hjson +pygments diff --git a/users/sigul/sigul.h b/users/sigul/sigul.h index 3182ab026..6adc67063 100644 --- a/users/sigul/sigul.h +++ b/users/sigul/sigul.h @@ -25,6 +25,7 @@ enum userspace_custom_keycodes { SECRET2, SECRET3, SECRET4, + SECRET5, NEW_SAFE_RANGE // start new keyboard-level declarations with NEW_SAFE_RANGE }; |