diff options
Diffstat (limited to 'converter/m0110_usb')
| -rw-r--r-- | converter/m0110_usb/Makefile | 96 | ||||
| -rw-r--r-- | converter/m0110_usb/Makefile.pjrc | 73 | ||||
| -rw-r--r-- | converter/m0110_usb/Makefile.teensy | 98 | ||||
| -rw-r--r-- | converter/m0110_usb/README.md | 82 | ||||
| -rw-r--r-- | converter/m0110_usb/config.h | 62 | ||||
| -rw-r--r-- | converter/m0110_usb/keymap_common.c | 37 | ||||
| -rw-r--r-- | converter/m0110_usb/keymap_common.h | 143 | ||||
| -rw-r--r-- | converter/m0110_usb/keymap_default.c | 85 | ||||
| -rw-r--r-- | converter/m0110_usb/keymap_for_editor.c | 118 | ||||
| -rw-r--r-- | converter/m0110_usb/keymap_hasu.c | 87 | ||||
| -rw-r--r-- | converter/m0110_usb/keymap_intl.c | 85 | ||||
| -rw-r--r-- | converter/m0110_usb/keymap_plain.c | 64 | ||||
| -rw-r--r-- | converter/m0110_usb/keymap_spacefn.c | 71 | ||||
| -rw-r--r-- | converter/m0110_usb/led.c | 32 | ||||
| -rw-r--r-- | converter/m0110_usb/matrix.c | 142 |
15 files changed, 1275 insertions, 0 deletions
diff --git a/converter/m0110_usb/Makefile b/converter/m0110_usb/Makefile new file mode 100644 index 000000000..466285fe9 --- /dev/null +++ b/converter/m0110_usb/Makefile @@ -0,0 +1,96 @@ +# Target file name (without extension). +TARGET = m0110_lufa + +# Directory common source filess exist +TMK_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = matrix.c \ + led.c \ + keymap_common.c \ + m0110.c + +# To use own keymap file run make like: make keymap=hasu +ifdef KEYMAP + SRC += keymap_$(KEYMAP).c +else + SRC += keymap_default.c +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u2 # TMK converter rev2 +#MCU = atmega32u4 # TMK converter rev1 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# *Comment out* to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + + +include $(TMK_DIR)/protocol/lufa.mk +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/rules.mk diff --git a/converter/m0110_usb/Makefile.pjrc b/converter/m0110_usb/Makefile.pjrc new file mode 100644 index 000000000..5faf5c255 --- /dev/null +++ b/converter/m0110_usb/Makefile.pjrc @@ -0,0 +1,73 @@ +# Target file name (without extension). +TARGET = m0110_pjrc + +# Directory common source filess exist +TMK_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = matrix.c \ + led.c \ + m0110.c + +# To use own keymap file run make like: make keymap=hasu +ifdef keymap + SRC += keymap_$(keymap).c +else + SRC += keymap.c +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# *Comment out* to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + + +include $(TMK_DIR)/protocol/pjrc.mk +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/rules.mk diff --git a/converter/m0110_usb/Makefile.teensy b/converter/m0110_usb/Makefile.teensy new file mode 100644 index 000000000..f664b6753 --- /dev/null +++ b/converter/m0110_usb/Makefile.teensy @@ -0,0 +1,98 @@ +# Target file name (without extension). +TARGET = m0110_lufa + +# Directory common source filess exist +TMK_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = matrix.c \ + led.c \ + keymap_common.c \ + m0110.c + +# To use own keymap file run make like: make keymap=hasu +ifdef KEYMAP + SRC += keymap_$(KEYMAP).c +else + SRC += keymap_default.c +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# *Comment out* to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + + +include $(TMK_DIR)/protocol/lufa.mk +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/rules.mk diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md new file mode 100644 index 000000000..c1ecb53b0 --- /dev/null +++ b/converter/m0110_usb/README.md @@ -0,0 +1,82 @@ +M0110/M0110A to USB keyboard converter +====================================== +This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller like **ATmega32U2** and **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. + +Read README of top directory too. + +Pictures of **M0110 + M0120** and **M0110A**. + + + + + +- M0110A support was contributed by [skagon@github](https://github.com/skagon). +- M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys. + + + +Update +------ +- 2013/08: Change port for signals `PF` to `PD` +- 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now. +- 2014/06: Change keymaps +- 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c) + + + +Building Hardware +----------------- +You need [TMK converter] or AVR dev board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. + +[](http://i.imgur.com/4G2ZOeg.jpg) + +### 4P4C phone handset cable +Note that original cable used with Mac is **straight** while phone handset cable is **crossover**. + +<http://en.wikipedia.org/wiki/Modular_connector#4P4C> + +Close-up picture of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge. +[](http://i.imgur.com/3S9P1mY.jpg?1) + +[Teensy]: http://www.pjrc.com/teensy/ +[TMK converter]: https://github.com/tmk/keyboard_converter + + +### Socket Pinout +- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml> + + + + +### Pull-up Resistor +You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors. + + + +Building Firmware +----------------- +To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. Also `KEYMAP` option can be used to select keymap. + + $ git clone git://github.com/tmk/tmk_keyboard.git (or download source) + $ cd m0110_usb + $ make -f Makefile clean + $ make -f Makefile [KEYMAP={default|plain|intl|spacefn|hasu}] + +Use `Makefile.teensy` instead for Teensy. + + + +Keymap +------ +To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this. + + $ make -f Makefile clean + $ make -f Makefile KEYMAP=name + + + +Debug +----- +You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `<Magic>+H` simultaneously to get help. + +- Magic combo: `Shift+Option+⌘` or `Shift+Option+Ctrl`(`Shift+Alt+Gui` or `Shift+Alt+Control`) diff --git a/converter/m0110_usb/config.h b/converter/m0110_usb/config.h new file mode 100644 index 000000000..801bc4ebf --- /dev/null +++ b/converter/m0110_usb/config.h @@ -0,0 +1,62 @@ +/* +Copyright 2011,2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0110 +#define DEVICE_VER 0x0101 +#define MANUFACTURER t.m.k. +#define PRODUCT M0110 keyboard converter +#define DESCRIPTION convert M0110 keyboard to USB + + +/* matrix size */ +#define MATRIX_ROWS 14 +#define MATRIX_COLS 8 + + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +/* magic key */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LGUI)) || \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT) | MOD_BIT(KC_LCTL)) \ +) + +/* boot magic key */ +#define BOOTMAGIC_KEY_SALT KC_FN0 +#define BOOTMAGIC_KEY_CAPSLOCK_TO_CONTROL KC_LCAP + + +/* ports */ +#define M0110_CLOCK_PORT PORTD +#define M0110_CLOCK_PIN PIND +#define M0110_CLOCK_DDR DDRD +#define M0110_CLOCK_BIT 1 +#define M0110_DATA_PORT PORTD +#define M0110_DATA_PIN PIND +#define M0110_DATA_DDR DDRD +#define M0110_DATA_BIT 0 + +#endif diff --git a/converter/m0110_usb/keymap_common.c b/converter/m0110_usb/keymap_common.c new file mode 100644 index 000000000..4ac2d7178 --- /dev/null +++ b/converter/m0110_usb/keymap_common.c @@ -0,0 +1,37 @@ +/* +Copyright 2011,2012,2014 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <avr/pgmspace.h> +#include "action.h" +#include "keycode.h" +#include "keymap.h" +#include "keymap_common.h" + + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn index to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + action_t action; + action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); + return action; +} diff --git a/converter/m0110_usb/keymap_common.h b/converter/m0110_usb/keymap_common.h new file mode 100644 index 000000000..8bde7473d --- /dev/null +++ b/converter/m0110_usb/keymap_common.h @@ -0,0 +1,143 @@ +/* +Copyright 2011,2012,2014 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <avr/pgmspace.h> +#include "keycode.h" +#include "keymap.h" + + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + + +/* + * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset + * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist + * on the M0110A, but since it generates a unique scan code which is not used for some other key in + * the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost) + * identical to the combination of the M0110 along with the M0120 keypad. The only difference + * (which is causing some problems as you will read below) is that the M0110+M0120 don't have + * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which + * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has + * substituted the [comma] key with the [=] key, however its scancode is the same. + * + * Physical layout: + * M0110A + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------' |-----------|Ent| + * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + * + * M0110 M0120 + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| + * |---------------------------------------------------------| |---------------| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Ent |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + * With Shift keys on M0120 work as curosor.(-:Left *:Right /:Up ,:Down) + * + * NOTE: \ is located differently. + * NOTE: Enter on M0110 is different from Enter on keypad(M0120 and M0110A). + * NOTE: Left Shift and right Shift are logically same key. + * NOTE: Left Option and right Option are logically same key. + */ + +/* Keymap definition Macro + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Opt |Mac | Space |Ent| \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + * NOTE: Ent between Space and \ means Enter on M0110. + */ +#define KEYMAP( \ + K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ + K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K4E, \ + K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K66, \ + K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K4D, K53,K54,K55,K4C, \ + K3A,K37, K31, K34,K2A,K46,K42,K48, K52, K41 \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ + { KC_##K08, KC_##K09, KC_NO, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ + { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ + { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_NO, KC_##K37 }, \ + { KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_##K47 }, \ + { KC_##K48, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \ + { KC_NO, KC_NO, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ + { KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \ + { KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \ +} + +/* International keyboard + * ,---------------------------------------------------------. + * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| + * |---------------------------------------------------------| + * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| + * |------------------------------------------------------, | + * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | + * |---------------------------------------------------------| + * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38| + * `---------------------------------------------------------' + * | 3A| 37| 34 | 31| 3A| + * `------------------------------------------------' + */ +#define KEYMAP_INTL( \ + K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ + K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K59,K5B,K5C,K4E, \ + K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,K24, K56,K57,K58,K66, \ + K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A, K4D, K53,K54,K55,K4C, \ + K3A,K37, K34, K31, K46,K42,K48, K52, K41 \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ + { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ + { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ + { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_NO, KC_##K37 }, \ + { KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_##K47 }, \ + { KC_##K48, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \ + { KC_NO, KC_NO, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ + { KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \ + { KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \ +} diff --git a/converter/m0110_usb/keymap_default.c b/converter/m0110_usb/keymap_default.c new file mode 100644 index 000000000..b0b8ee220 --- /dev/null +++ b/converter/m0110_usb/keymap_default.c @@ -0,0 +1,85 @@ +/* +Copyright 2011,2012,2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include "keycode.h" +#include "keymap_common.h" + + + +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + /* Default: + * M0110 M0120 + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| + * |---------------------------------------------------------| |---------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + * M0110A + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + */ + [0] = KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, BSLS,LEFT,RGHT,DOWN, P0, PDOT + ), + /* Cursor Layer + * ,---------------------------------------------------------. ,---------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | |INS| | 7| 8| 9| /| + * |---------------------------------------------------------| |---------------| + * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + */ + [1] = KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, P7, P8, P9, PMNS, + LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, + LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, INS, HOME,END, PGDN, P0, PDOT + ), +}; + + +/* + * Fn action definition + */ +const uint16_t fn_actions[] PROGMEM = { + [0] = ACTION_LAYER_MOMENTARY(1), +}; diff --git a/converter/m0110_usb/keymap_for_editor.c b/converter/m0110_usb/keymap_for_editor.c new file mode 100644 index 000000000..d20f298f8 --- /dev/null +++ b/converter/m0110_usb/keymap_for_editor.c @@ -0,0 +1,118 @@ +/* +Copyright 2014 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include "keycode.h" +#include "keymap_common.h" + + +#ifdef KEYMAP_SECTION_ENABLE +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { +#else +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { +#endif + /* Default: + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Ctl |Gui | Space |Alt| \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + */ + [0] = KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, CLR, EQL, PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, FN15, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, + LCTL,LGUI, FN16, LALT,FN31,LEFT,RGHT,DOWN, P0, PDOT + ), + /* Cursor Layer(WASD, IJKL) + * ,---------------------------------------------------------. ,---------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Ctl |Gui | Space |Alt | \|Hom|End|PgD| | 0| .| | + * `---------------------------------------------------------' `---------------' + */ + [3] = KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS, + LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS, + LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, + LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT + ), + [4] = KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS, + LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS, + LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, + LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT + ), + [7] = {}, +}; + + +/* + * Fn action definition + */ +#ifdef KEYMAP_SECTION_ENABLE +const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = { +#else +const uint16_t fn_actions[] PROGMEM = { +#endif + [0] = ACTION_LAYER_MOMENTARY(1), + [1] = ACTION_LAYER_MOMENTARY(2), + [2] = ACTION_LAYER_MOMENTARY(3), + [3] = ACTION_LAYER_MOMENTARY(4), + [4] = ACTION_LAYER_MOMENTARY(5), + [5] = ACTION_LAYER_MOMENTARY(6), + [6] = ACTION_LAYER_MOMENTARY(7), + [7] = ACTION_LAYER_TOGGLE(1), + [8] = ACTION_LAYER_TOGGLE(2), + [9] = ACTION_LAYER_TOGGLE(3), + [10] = ACTION_LAYER_TAP_TOGGLE(1), + [11] = ACTION_LAYER_TAP_TOGGLE(2), + [12] = ACTION_LAYER_TAP_TOGGLE(3), + [13] = ACTION_LAYER_TAP_KEY(1, KC_F), + [14] = ACTION_LAYER_TAP_KEY(2, KC_J), + [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER), + [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE), + [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON), + [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE), + [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH), + [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE), + [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE), + [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE), + [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER), + [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC), + [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE), + [26] = ACTION_MODS_ONESHOT(MOD_LCTL), + [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC), + [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE), + [29] = ACTION_MODS_ONESHOT(MOD_LSFT), + [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE), + [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH), +}; diff --git a/converter/m0110_usb/keymap_hasu.c b/converter/m0110_usb/keymap_hasu.c new file mode 100644 index 000000000..11f1a4f39 --- /dev/null +++ b/converter/m0110_usb/keymap_hasu.c @@ -0,0 +1,87 @@ +/* +Copyright 2014 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include "keycode.h" +#include "keymap_common.h" + + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Default: + * M0110 + * ,---------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| + * |---------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |---------------------------------------------------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| Fn| '|Return| + * |---------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| Fn|Shift | + * `---------------------------------------------------------' + * |Fn |alt | Fn |Gui |Fn | + * `-----------------------------------------------' + */ + [0] = KEYMAP( + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, UP, P1, P2, P3, PENT, + FN0, LALT, FN2, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT + ), + // IJKL cursor + [1] = KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,NO, NO, NO, NO, NO, HOME,PGDN,UP, PGUP,END, NO, NO, P7, P8, P9, PMNS, + LCTL,VOLD,VOLU,MUTE,NO, NO, HOME,LEFT,DOWN,RGHT,END, NO, ENT, P4, P5, P6, PPLS, + LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, PGUP, P1, P2, P3, PENT, + TRNS,LALT, SPC, LGUI,BSLS,HOME,END, PGDN, P0, PDOT + ), + // HJKL cursor + [2] = KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,NO, NO, NO, NO, NO, HOME,PGDN,UP, PGUP,END, NO, NO, P7, P8, P9, PMNS, + LCTL,VOLD,VOLU,MUTE,NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, + LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, TRNS, PGUP, P1, P2, P3, PENT, + TRNS,LALT, SPC, LGUI,BSLS,HOME,END, PGDN, P0, PDOT + ), + // Mousekey + [3] = KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,Q, W, E, R, T, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD, P7, P8, P9, PMNS, + LCTL,VOLD,VOLU,MUTE,NO, NO, BTN2,MS_L,MS_D,MS_R,BTN1,NO, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, BTN2,BTN1,BTN4,BTN5,NO, PGUP, P1, P2, P3, PENT, + NO, LALT, TRNS, LGUI,BSLS,HOME,END, PGDN, P0, PDOT + ), + // Mousekey + [4] = KEYMAP( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,Q, W, E, R, T, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD, P7, P8, P9, PMNS, + LCTL,VOLD,VOLU,MUTE,NO, NO, BTN2,MS_L,MS_D,MS_R,TRNS,NO, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, BTN2,BTN1,BTN4,BTN5,NO, PGUP, P1, P2, P3, PENT, + NO, LALT, BTN1, LGUI,BSLS,HOME,END, PGDN, P0, PDOT + ), +}; + + +/* + * Fn action definition + */ +const uint16_t fn_actions[] PROGMEM = { + [0] = ACTION_LAYER_MOMENTARY(1), + [1] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), + [2] = ACTION_LAYER_TAP_KEY(3, KC_SPACE), + [3] = ACTION_LAYER_TAP_KEY(4, KC_SCOLON), +}; diff --git a/converter/m0110_usb/keymap_intl.c b/converter/m0110_usb/keymap_intl.c new file mode 100644 index 000000000..80b029305 --- /dev/null +++ b/converter/m0110_usb/keymap_intl.c @@ -0,0 +1,85 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include "keycode.h" +#include "keymap_common.h" + + + +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { + /* International keyboard + * M0110 M0120 + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Ret| | 7| 8| 9| /| + * |------------------------------------------------------, | |---------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shif| <| Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + * M0110A(not existent?) + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Ret| | 7| 8| 9| -| + * |------------------------------------------------------, | |---------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shif| <| Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + */ + [0] = KEYMAP_INTL( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,ENT, P7, P8, P9, PMNS, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, P4, P5, P6, PPLS, + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, LEFT,RGHT,DOWN, P0, PDOT + ), + /* Cursor Layer + * ,---------------------------------------------------------. ,---------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | |Ret| | 7| 8| 9| /| + * |------------------------------------------------------, | |---------------| + * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Ins| | | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shif| <|End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + */ + [1] = KEYMAP_INTL( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, ENT, P7, P8, P9, PMNS, + LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT,INS, P4, P5, P6, PPLS, + LSFT,NO, END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, HOME,END, PGDN, P0, PDOT + ), +}; + + +/* + * Fn action definition + */ +const uint16_t fn_actions[] PROGMEM = { + [0] = ACTION_LAYER_MOMENTARY(1), +}; diff --git a/converter/m0110_usb/keymap_plain.c b/converter/m0110_usb/keymap_plain.c new file mode 100644 index 000000000..d1507fcaa --- /dev/null +++ b/converter/m0110_usb/keymap_plain.c @@ -0,0 +1,64 @@ +/* +Copyright 2014 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include "keycode.h" +#include "keymap_common.h" + + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Default: + * M0110 M0120 + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| + * |---------------------------------------------------------| |---------------| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Mac |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + * M0110A + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------' |-----------|Ent| + * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + */ + [0] = KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,PEQL,PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, + LALT,LGUI, SPC, RGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT + ), +}; + +/* + * Fn action definition + */ +const uint16_t fn_actions[] PROGMEM = { +}; + + diff --git a/converter/m0110_usb/keymap_spacefn.c b/converter/m0110_usb/keymap_spacefn.c new file mode 100644 index 000000000..5017861a3 --- /dev/null +++ b/converter/m0110_usb/keymap_spacefn.c @@ -0,0 +1,71 @@ +/* +Copyright 2014 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include "keycode.h" +#include "keymap_common.h" + + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Default: + * M0110 M0120 + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| + * |---------------------------------------------------------| |---------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | + * `---------------------------------------------------------' |-----------|Ent| + * |Opt|Mac | Space |Mac |Opt| | 0| .| | + * `-----------------------------------------------' `---------------' + * M0110A + * ,---------------------------------------------------------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | + * |---------------------------------------------------------' |-----------|Ent| + * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | + * `---------------------------------------------------------' `---------------' + */ + [0] = KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,PEQL,PSLS,PAST, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, + LALT,LGUI, FN0, RGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT + ), + [1] = KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, + TRNS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP, END, PSCR,SLCK,PAUS, P7, P8, P9, PMNS, + LCTL,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS, TRNS, P4, P5, P6, PPLS, + TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,APP, PGUP, P1, P2, P3, PENT, + TRNS,TRNS, TRNS, TRNS,INS, HOME,END, PGDN, P0, PDOT + ), +}; + +/* + * Fn action definition + */ +const uint16_t fn_actions[] PROGMEM = { + [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), + [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // tilde +}; diff --git a/converter/m0110_usb/led.c b/converter/m0110_usb/led.c new file mode 100644 index 000000000..3822a131b --- /dev/null +++ b/converter/m0110_usb/led.c @@ -0,0 +1,32 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <avr/io.h> +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + DDRD |= (1<<6); + PORTD |= (1<<6); + } else { + DDRD |= (1<<6); + PORTD &= ~(1<<6); + } +} diff --git a/converter/m0110_usb/matrix.c b/converter/m0110_usb/matrix.c new file mode 100644 index 000000000..2189c0b56 --- /dev/null +++ b/converter/m0110_usb/matrix.c @@ -0,0 +1,142 @@ +/* +Copyright 2011,2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "util.h" +#include "debug.h" +#include "host.h" +#include "led.h" +#include "m0110.h" +#include "matrix.h" + + +#define CAPS 0x39 +#define CAPS_BREAK (CAPS | 0x80) +#define ROW(key) ((key)>>3&0x0F) +#define COL(key) ((key)&0x07) + + +static bool is_modified = false; + +// matrix state buffer(1:on, 0:off) +static uint8_t *matrix; +static uint8_t _matrix0[MATRIX_ROWS]; + +static void register_key(uint8_t key); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + m0110_init(); + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00; + matrix = _matrix0; + return; +} + +uint8_t matrix_scan(void) +{ + uint8_t key; + + is_modified = false; + key = m0110_recv_key(); + + if (key == M0110_NULL) { + return 0; + } else if (key == M0110_ERROR) { + return 0; + } else { + is_modified = true; + register_key(key); + } + + if (debug_enable) { + print("["); phex(key); print("]\n"); + } + return 1; +} + +bool matrix_is_modified(void) +{ + return is_modified; +} + +inline +bool matrix_has_ghost(void) +{ + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +inline +uint8_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < matrix_rows(); row++) { + phex(row); print(": "); + pbin_reverse(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop(matrix[i]); + } + return count; +} + +inline +static void register_key(uint8_t key) +{ + if (key&0x80) { + matrix[ROW(key)] &= ~(1<<COL(key)); + } else { + matrix[ROW(key)] |= (1<<COL(key)); + } +} |