diff options
Diffstat (limited to 'keyboard/planck')
| -rwxr-xr-x | keyboard/planck/CYGWIN_GUIDE.md | 352 | ||||
| -rw-r--r-- | keyboard/planck/Makefile | 2 | ||||
| -rw-r--r-- | keyboard/planck/README.md | 4 | ||||
| -rw-r--r-- | keyboard/planck/keymaps/default/keymap.c | 70 | ||||
| -rw-r--r-- | keyboard/planck/keymaps/lock/keymap.c | 2 | ||||
| -rw-r--r-- | keyboard/planck/keymaps/tak3over.c | 136 | ||||
| -rw-r--r-- | keyboard/planck/old_keymap_files/common_keymaps/keymap_mitch.c | 49 | ||||
| -rw-r--r-- | keyboard/planck/planck.c | 46 | ||||
| -rw-r--r-- | keyboard/planck/planck.h | 5 |
9 files changed, 631 insertions, 35 deletions
diff --git a/keyboard/planck/CYGWIN_GUIDE.md b/keyboard/planck/CYGWIN_GUIDE.md new file mode 100755 index 000000000..ac13e745d --- /dev/null +++ b/keyboard/planck/CYGWIN_GUIDE.md @@ -0,0 +1,352 @@ +#Planck Advanced (but not too advanced) `cygwin` Users Guide +If you are a user of the [cygwin environment](https://cygwin.com) in Windows and want the freedom to use the latest tools available, then this is the guide for you. If compiling your own copy of the latest and greatest Gnu C Compiler makes you super happy, then this is the guide for you. If the command line make you smile, then this is the guide for you. + +This guide was written step by step as I went through the process on a `Windows 10` `x86_64` and a `Windows 7` `amd k10` based system. This should be generally applicable to to any `Windows` environment with `cygwin`. + +#####Do not skip steps. Do not move past a step until the previous step finishes successfully. + +Based on [avr-libc installation guide](http://www.nongnu.org/avr-libc/user-manual/install_tools.html) + +##Get the Required Packages +Download the `cygwin` setup ([x86_64](https://cygwin.com/setup-x86_64.exe)) and install the default system plus the following if they are not already selected: +- devel/git +- devel/gcc-core +- devel/gcc-g++ +- devel/flex +- devel/bison +- devel/make +- devel/texinfo +- devel/gettext-devel +- devel/automake +- devel/autoconfig +- devel/libtool +- text/gettext +- libs/libgcc1 +- interpreters/m4 +- web/wget +- archive/unzip + +The following sources will be required: +- [gmp](https://gmplib.org/) (6.1.0) +- [mpfr](http://www.mpfr.org/) (3.1.4) +- [mpc](http://www.multiprecision.org/) (1.0.3) +- [binutils](https://www.sourceware.org/binutils/) (2.26) +- [gcc](https://gcc.gnu.org/) (5.3.0) +- [avr-libc](http://www.nongnu.org/avr-libc/) (2.0.0) + +The `dfu-programmer` will be required to flash the new firmware +- [dfu-programmer](https://dfu-programmer.github.io/) (0.7.2) + +The set of commands below will create a directory (`~/local/avr`) for the sources you compile to be installed on the machine and a directory (`~/src`) for these source files to be stored. The commands then download the sources of the needed packages and unpack them. Note: the expand commands are different depending on if the packages are offered as a `bz2` or `gz` archive +``` +$ mkdir ~/local +$ mkdir ~/local/avr +$ mkdir ~/src +$ cd ~/src +$ wget https://gmplib.org/download/gmp/gmp-6.1.0.tar.bz2 +$ wget http://www.mpfr.org/mpfr-3.1.4/mpfr-3.1.4.tar.bz2 +$ wget ftp://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz +$ wget http://ftp.gnu.org/gnu/binutils/binutils-2.26.tar.gz +$ wget http://mirror0.babylon.network/gcc/releases/gcc-5.3.0/gcc-5.3.0.tar.gz +$ wget http://download.savannah.gnu.org/releases/avr-libc/avr-libc-2.0.0.tar.bz2 +$ tar -xjf gmp-6.1.0.tar.bz2 +$ tar -xjf mpfr-3.1.4.tar.bz2 +$ tar -zxf mpc-1.0.3.tar.gz +$ tar -zxf binutils-2.26.tar.gz +$ tar -zxf gcc-5.3.0.tar.gz +$ tar -xjf avr-libc-2.0.0.tar.bz2 +``` + +##Setup the Build Environment +These commands will set up the install directory and the `PATH` variable, which will allow you to access your installed packages. Note: if you close the `cygwin` terminal window, you will need to rerun these commands, they are not permanent. +``` +$ PREFIX=$HOME/local/avr +$ export PREFIX +$ PATH=/usr/local/bin:/usr/local/lib:/usr/local/include:/bin:/lib:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS +$ PATH=$PATH:$PREFIX/bin:$PREFIX/lib +$ export PATH +``` + +##The `gcc` Required Math Library Packages +The following packages are required to be complied and installed in order to compile `gcc`. They are not sufficiently available through the `cygwin` package system, so we have to make them ourselves. They must be complied in this order because each one depends on the previous. Verfiy that for each package, `make check` returns all passing and no fails. + +###Build and Install `gmp` +``` +$ cd ~/src/gmp-6.1.0 +$ ./configure --enable-static --disable-shared +$ make +$ make check +$ make install +``` + +###Build and Install `mpfr` +``` +$ cd ~/src/mpfr-3.1.4 +$ ./configure --with-gmp-build=../gmp-6.1.0 --enable-static --disable-shared +$ make +$ make check +$ make install +``` + +###Build and Install `mpc` +``` +$ cd ~/src/mpc-1.0.3 +$ ./configure --with-gmp=/usr/local --with-mpfr=/usr/local --enable-static --disable-shared +$ make +$ make check +$ make install +``` + +##OPTIONAL Part +You can build and install a brand new `gcc` or you can use the one supplied by `cygwin`. This will take about 4-5 hours to compile (It is a "native build", so it does the entire build **3 times**. This takes a long while). + +###Build and Install `gcc` for Your Machine +``` +$ cd ~/src/gcc-5.3.0 +$ mkdir obj-local +$ cd obj-local +$ ../configure --enable-languages=c,c++ --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --enable-static --disable-shared +$ make +$ make install +``` +##End OPTIONAL Part + +###Build and Install `binutils` for Your Machine +``` +$ cd ~/src/binutils-2.26 +$ mkdir obj-local +$ cd obj-local +$ ../configure +$ make +$ make install +``` + +##Buliding `binutils`, `gcc`, and `avr-libc` for the AVR system +Now we can make the critical stuff for compiling our firmware: `binutils`, `gcc`, and `avr-libc` for the AVR architecture. These allow us to build and manipulate the firmware for the keyboard. + +###Build `binutils` for AVR +If you plan to build and install `avr-gdb` also, use the `gdb` install at the end of this guide as it also builds the `binutils` +``` +$ cd ~/src/binutils-2.26 +$ mkdir obj-avr +$ cd obj-avr +$ ../configure --prefix=$PREFIX --target=avr --disable-nls +$ make +$ make install +``` + +###Build `gcc` for AVR +``` +$ cd ~/src/gcc-5.3.0 +$ mkdir obj-avr +$ cd obj-avr +$ ../configure --prefix=$PREFIX --target=avr --enable-languages=c,c++ --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --enable-static --disable-shared --disable-nls --disable-libssp --with-dwarf2 +$ make +$ make install +``` + +###Build `avr-libc` for AVR +For building the `avr-libc`, we have to specify the host build system. In my case it is `x86_64-unknown-cygwin`. You can look for build system type in the `gcc` configure notes for the proper `--build` specification to pass when you configure `avr-libc`. +``` +$ cd ~/src/avr-libc-2.0.0 +$ ./configure --prefix=$PREFIX --build=x86_64-unknown-cygwin --host=avr +$ make +$ make install +``` + +##Building 'dfu-programmer' for flashing the firmware via USB and installing the drivers +We can either build our own, or use the precomplied binaries. The precompiled binaries don't play well with `cygwin` so it is better to build them ourselves. The procedure for the precompiled binaries is included at the end of this guide. + +### Build and Install the `libusb` +The `dfu-programmer` requires `libusb` so that it can interact with the USB system. These repos must be bootstrapped in order to create an appropriate `./configure` and `Makefile` for your system. +``` +$ cd ~/src +$ git clone https://github.com/libusb/libusb.git +$ cd libusb +$ ./bootstrap.sh +$ ./configure +$ make +$ make install +``` + +### Build and Install the `dfu-programmer` +``` +$ cd ~/src +$ git clone https://github.com/dfu-programmer/dfu-programmer.git +$ cd dfu-programmer +$ ./bootstrap.sh +$ ./configure +$ make +$ make install +``` + +Verify the installation with: +``` +$ which dfu-programmer +/usr/local/bin/dfu-programmer + +$ dfu-programmer +dfu-programmer 0.7.2 +https://github.com/dfu-programmer/dfu-programmer +Type 'dfu-programmer --help' for a list of commands + 'dfu-programmer --targets' to list supported target devices +``` +If you are not getting the above result, you will not be able to flash the firmware! + +###Install the USB drivers +The drivers are included in the windows binary version of [`dfu-programmer` 0.7.2](http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip). +``` +$ cd ~/src +$ wget http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip +$ unzip dfu-programmer-win-0.7.2.zip -d dfu-programmer-win-0.7.2 +``` + +or + +The official drivers are found in [Atmel's `FLIP` installer](http://www.atmel.com/images/Flip%20Installer%20-%203.4.7.112.exe). Download and then install `FLIP`. Upon installation, the drivers will be found in `C:\Program Files (x86)\Atmel\Flip 3.4.7\usb`. + +Then, from an **administrator-privileged** `Windows` terminal, run the following command (adjust the path for username, etc. as necessary) and accept the prompt that pops up: +``` +C:\> pnputil -i -a C:\cygwin64\home\Kevin\src\dfu-programmer-win-0.7.2\dfu-prog-usb-1.2.2\atmel_usb_dfu.inf +or +C:\> pnputil -i -a "C:\Program Files (x86)\Atmel\Flip 3.4.7\usb\atmel_usb_dfu.inf" +``` + +This should be the result: +``` +Microsoft PnP Utility + +Processing inf : atmel_usb_dfu.inf +Successfully installed the driver on a device on the system. +Driver package added successfully. +Published name : oem104.inf + + +Total attempted: 1 +Number successfully imported: 1 +``` + +Alternatively, the `Windows` driver can be installed when prompted by `Windows` when the keyboard is attached. Do not let `Windows` search for a driver; specify the path to search for a driver and point it to the `atmel_usb_dfu.inf` file. + +##Building and Flashing the Planck firmware! +If you did everything else right. This part should be a snap! Grab the latest sources from `github`, make the Plank firmware, then flash it. + +###Build Planck and Load the Firmware +``` +$ cd ~/src +$ git clone https://github.com/jackhumbert/qmk_firmware.git +$ cd qmk_firmware/keyboard/planck +$ make +``` + +Make sure there are no errors. You should end up with this or something similar: +``` +Creating load file for Flash: planck.hex +avr-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature planck.elf planck.hex + +Creating load file for EEPROM: planck.eep +avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \ +--change-section-lma .eeprom=0 --no-change-warnings -O ihex planck.elf planck.eep || exit 0 + +Creating Extended Listing: planck.lss +avr-objdump -h -S -z planck.elf > planck.lss + +Creating Symbol Table: planck.sym +avr-nm -n planck.elf > planck.sym + +Size after: + text data bss dec hex filename + 18602 82 155 18839 4997 planck.elf + +-------- end -------- +``` + +If you do not get the above, you **did not** build the firmware, and you will have nothing to flash. If you have the fresh clone from `github`, it was probably something gone wrong in this install process, go check and see what didn't work and threw errors or what steps you might have missed. + +But if everything went OK, you are ready to flash! Press the reset button on the bottom of the Planck, wait two seconds, then: +``` +$ make dfu +``` +. +. +. +profit!!! + + + + + +##extra bits... + +###Installing Precompiled `dfu-programmer` Binaries (not recommended for `cygwin`) +To install the `dfu-programmer` from the binaries, we must get if from [the `dfu-programmer` website](https://dfu-programmer.github.io/) ([0.7.2](http://iweb.dl.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip)). + +Copy this file into your `cygwin` home\src directory. (For me, it is `C:\cygwin64\home\Kevin\src`), extract the files, move `dfu-programmer.exe` to `~/local/avr/bin`. Most obnoxiously, the `libusb0_x86.dll` and `libusb0.sys` need to be moved from `./dfu-prog-usb-1.2.2/x86/` to a directory in the `Windows` `PATH` and the `cygwin` `PATH`. This is because the `dfu-programmer` binary is `mingw` based, not `cygwin` based, so the `dlls` do not cooperate. I achieved acceptable pathing by moving the files to `C:\cygwin64\home\Kevin\local\avr\bin` Then, in a `WINDOWS` command prompt running (Adjusting your path for username, etc. as needed): +``` +C:\> set PATH=%PATH%;C:\cygwin64\home\Kevin\local\avr\bin +``` + +Then, rename `libusb0_x86.dll` to `libusb0.dll`. + +You can tell that you were successful by trying to execute 'dfu-programmer' from the 'cygwin' prompt: +``` +$ which dfu-programmer +/home/Kevin/local/avr/bin/dfu-programmer + +$ dfu-programmer +dfu-programmer 0.7.2 +https://github.com/dfu-programmer/dfu-programmer +Type 'dfu-programmer --help' for a list of commands + 'dfu-programmer --targets' to list supported target devices +``` + +If you are not getting the above result, you will not be able to flash the firmware! +- Try making sure your `PATH` variables are set correctly for both `Windows` and `cygwin`. +- Make sure the `dll` is named correctly. +- Do not extract it with `cygwin`'s `unzip` as it does not set the executable permission. If you did it anyway, do `chmod +x dfu-programmer.exe`. +- Still have problems? Try building it instead. + + +##Debugging Tools + +These tools are for debugging your firmware, etc. before flashing. Theoretically, it can save your memory from wearing out. However, these tool do not work 100% for the Planck firmware. + +### `gdb` for AVR +`gdb` has a simulator for AVR but it does not support all instructions (like WDT), so it immediately crashes when running the Planck firmware (because `lufa.c` disables the WDT in the first few lines of execution). But it can still be useful in debugging example code and test cases, if you know how to use it. + +``` +$ cd ~/src +$ git clone git://sourceware.org/git/binutils-gdb.git +$ cd binutils-gdb +$ mkdir obj-avr +$ cd obj-avr +$ ../configure --prefix=$PREFIX --target=avr --build=x86_64-unknown-cygwin --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --disable-nls --enable-static +$ make +$ make install +``` + +### `simulavr` +`simulavr` is an AVR simulator. It runs the complied AVR elfs. `simulavr` does not support the `atmega32u4` device... it does `atmega32` but that is not good enough for the firmware (no PORTE and other things), so you cannot run the Planck firmware. I use it to simulate ideas I have for features in separate test projects. + +This one is a major pain in the butt because it has a lot of dependencies and it is buggy. I will do my best to explain it but... it was hard to figure out. A few things need to be changed in the 'Makefile' to make it work in `cygwin`. + + +``` +$ cd ~/src +$ git clone https://github.com/Traumflug/simulavr.git +$ cd simulavr +$ ./bootstrap +$ ./configure --prefix=$PREFIX --enable-static --disable-tcl --disable-doxygen-doc +``` + Edit `src/Makefile.am` now so that `-no-undefined` is included (I did this by removing the SYS_MINGW conditional surrounding `libsim_la_LDFLAGS += -no-undefined` and `libsimulavr_la_LDFLAGS += -no-undefined \ libsimulavr_la_LIBADD += $(TCL_LIB)`. Also, `$(EXEEXT)` is added after `kbdgentables` in two places. + +``` +$ make +$ make install +``` + + +TODO: +- git repos for all sources +- command line magic for cygwin setup +- better options for `dfu-drivers` diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile index 307b0c7f4..03d260176 100644 --- a/keyboard/planck/Makefile +++ b/keyboard/planck/Makefile @@ -143,7 +143,7 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality # AUDIO_ENABLE = YES # Audio output on port C6 # UNICODE_ENABLE = YES # Unicode # BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -# RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with MIDI at the same time. +# RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. ifdef BACKLIGHT_ENABLE SRC += backlight.c diff --git a/keyboard/planck/README.md b/keyboard/planck/README.md index 3ba0cc152..d9a1e3bee 100644 --- a/keyboard/planck/README.md +++ b/keyboard/planck/README.md @@ -16,13 +16,13 @@ Depending on which keymap you would like to use, you will have to compile slight To build with the default keymap, simply run `make`. ### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files. +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top README.md) and existent keymap files. To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: ``` $ make KEYMAP=[default|jack|<name>] ``` -Keymaps follow the format **__<name\>.c__** and are stored in the `keymaps` folder. +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. ### Notable forks (which some of the keymap files are from) - [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) diff --git a/keyboard/planck/keymaps/default/keymap.c b/keyboard/planck/keymaps/default/keymap.c index a9c2a0681..988deee99 100644 --- a/keyboard/planck/keymaps/default/keymap.c +++ b/keyboard/planck/keymaps/default/keymap.c @@ -17,31 +17,91 @@ #define _RS 4 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_QW] = { /* Qwerty */ + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QW] = { {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, -[_CM] = { /* Colemak */ + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_CM] = { {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, -[_DV] = { /* Dvorak */ + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DV] = { {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, {M(0), KC_LCTL, KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} }, -[_RS] = { /* RAISE */ + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Dvorak| Reset|Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RS] = { {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, -[_LW] = { /* LOWER */ + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Dvorak| Reset|Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Raise | Space |Lower | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LW] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), DF(_DV), RESET, KC_TRNS}, diff --git a/keyboard/planck/keymaps/lock/keymap.c b/keyboard/planck/keymaps/lock/keymap.c index 958576462..f1629492e 100644 --- a/keyboard/planck/keymaps/lock/keymap.c +++ b/keyboard/planck/keymaps/lock/keymap.c @@ -150,7 +150,7 @@ float start_up[][2] = { {440.0*pow(2.0,(64)/12.0), 1000}, }; -void * matrix_init_user(void) { +void matrix_init_user(void) { init_notes(); play_notes(&start_up, 9, false); }
\ No newline at end of file diff --git a/keyboard/planck/keymaps/tak3over.c b/keyboard/planck/keymaps/tak3over.c new file mode 100644 index 000000000..c49af7d0e --- /dev/null +++ b/keyboard/planck/keymaps/tak3over.c @@ -0,0 +1,136 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. +// +// Custom style by tak3over. Dropped the dvorak layer as it was not being used by me. Shifted over +// keys to make room for a second function key on the left side. Now has a keypad and most all +// standard keyboard keys. Including Delete. See TK layer. + +#include "planck.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _CM 1 +#define _TK 2 +#define _LW 3 +#define _RS 4 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI | TK |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QW] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LCTL, KC_LALT, KC_LGUI, MO(_TK), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI | TK |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_CM] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LCTL, KC_LALT, KC_LGUI, MO(_TK), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* TenKey, Arrow, and Function key Layer + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | Left | Up | Down | Right| Del | * | 4 | 5 | 6 | + | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Home | PGUP | PGDN | End | Ins | . | 1 | 2 | 3 | - |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI | TK |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_TK] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_ESC, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_DEL, KC_ASTR, KC_4, KC_5, KC_6, KC_PLUS, KC_SLSH}, + {KC_LSFT, KC_HOME, KC_PGUP, KC_PGDN, KC_END, KC_INS, KC_DOT, KC_1, KC_2, KC_3, KC_MINS, KC_ENT }, + {KC_LCTL, KC_LALT, KC_LGUI, MO(_TK), MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Brite | Reset|Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI | TK |Raise | Space |Lower | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RS] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), M(0), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| F7 | F8 | F9 | F10 | F11 | F12 |Qwerty|Colemk|Brite | Reset|Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | GUI | TK |Raise | Space |Lower | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LW] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_CM), M(0), RESET, KC_TRNS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboard/planck/old_keymap_files/common_keymaps/keymap_mitch.c b/keyboard/planck/old_keymap_files/common_keymaps/keymap_mitch.c new file mode 100644 index 000000000..f7df7bbba --- /dev/null +++ b/keyboard/planck/old_keymap_files/common_keymaps/keymap_mitch.c @@ -0,0 +1,49 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, + LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN3, + ESC, DEL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( + GRV, GRV, FN22, FN19, FN10, TRNS, TRNS, 7, 8, 9, 0, BSPC, + TRNS, LBRC, RBRC, FN23, FN24, TRNS, TRNS, 4, 5, 6, TRNS, BSLS, + TRNS, MINS, FN20, EQL, FN21, TRNS, TRNS, 1, 2, 3, TRNS, ENT, + TRNS, TRNS, TRNS, TRNS, TRNS, SPC, FN1, TRNS, PGDN, PGUP, TRNS), +[2] = KEYMAP( + FN26, FN10, FN11, FN12, FN13, FN14, FN15, FN17, FN18, FN19, FN10, DEL, + TRNS, TRNS, MUTE, VOLD, VOLU, TRNS, BSPC, FN14, FN15, FN16, TRNS, FN25, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN11, FN12, FN13, TRNS, ENT, + TRNS, TRNS, TRNS, TRNS, FN2, ENT, TRNS, TRNS, PGDN, PGUP, TRNS), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // Switch layer raise + [2] = ACTION_LAYER_MOMENTARY(2), // Switch layer lower + + [3] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), // Right shift serves as Enter on tap + + // Numeric shift modifiers + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + + // Other shift modifiers + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _ + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~ + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // { + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // } + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // | + + // Switch windows in app + [26] = ACTION_MODS_KEY(MOD_LGUI, KC_GRV), +}; diff --git a/keyboard/planck/planck.c b/keyboard/planck/planck.c index 63ca54761..4b39cf1e8 100644 --- a/keyboard/planck/planck.c +++ b/keyboard/planck/planck.c @@ -1,36 +1,34 @@ #include "planck.h" __attribute__ ((weak)) -void * matrix_init_user(void) { - -}; +void matrix_init_user(void) {} __attribute__ ((weak)) -void * matrix_scan_user(void) { +void matrix_scan_user(void) {} -}; +__attribute__ ((weak)) +void process_action_user(keyrecord_t *record) {} -void * matrix_init_kb(void) { - #ifdef BACKLIGHT_ENABLE - backlight_init_ports(); - #endif +void matrix_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_init_ports(); +#endif - #ifdef RGBLIGHT_ENABLE - rgblight_init(); - #endif +#ifdef RGBLIGHT_ENABLE + rgblight_init(); +#endif + // Turn status LED on + DDRE |= (1<<6); + PORTE |= (1<<6); - // Turn status LED on - DDRE |= (1<<6); - PORTE |= (1<<6); + matrix_init_user(); +} - if (matrix_init_user) { - (*matrix_init_user)(); - } -}; +void matrix_scan_kb(void) { + matrix_scan_user(); +} -void * matrix_scan_kb(void) { - if (matrix_scan_user) { - (*matrix_scan_user)(); - } -}; +void process_action_kb(keyrecord_t *record) { + process_action_user(record); +} diff --git a/keyboard/planck/planck.h b/keyboard/planck/planck.h index 00b01b54d..edcb5fbff 100644 --- a/keyboard/planck/planck.h +++ b/keyboard/planck/planck.h @@ -40,7 +40,8 @@ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ } -void * matrix_init_user(void); -void * matrix_scan_user(void); +void matrix_init_user(void); +void matrix_scan_user(void); +void process_action_user(keyrecord_t *record); #endif |