diff options
Diffstat (limited to 'keyboards/crkbd/keymaps/thefrey/keymap.c')
| -rw-r--r-- | keyboards/crkbd/keymaps/thefrey/keymap.c | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/keyboards/crkbd/keymaps/thefrey/keymap.c b/keyboards/crkbd/keymaps/thefrey/keymap.c new file mode 100644 index 000000000..5077bfc87 --- /dev/null +++ b/keyboards/crkbd/keymaps/thefrey/keymap.c @@ -0,0 +1,244 @@ +#include QMK_KEYBOARD_H +#include "bootloader.h" +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, + BACKLIT, + RGBRST +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_LOWER LOWER +#define KC_RAISE RAISE +#define KC_RST RESET +#define KC_LRST RGBRST +#define KC_LTOG RGB_TOG +#define KC_LHUI RGB_HUI +#define KC_LHUD RGB_HUD +#define KC_LSAI RGB_SAI +#define KC_LSAD RGB_SAD +#define KC_LVAI RGB_VAI +#define KC_LVAD RGB_VAD +#define KC_LMOD RGB_MOD +#define KC_CTLTB CTL_T(KC_TAB) +#define KC_GUIEI GUI_T(KC_LANG2) +#define KC_ALTKN ALT_T(KC_LANG1) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_kc( \ + //,-----------------------------------------. ,-----------------------------------------. + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + CTLTB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ + //`--------------------' `--------------------' + ), + + [_LOWER] = LAYOUT_kc( \ + //,-----------------------------------------. ,-----------------------------------------. + TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + CTLTB, MUTE, VOLD, VOLU, PGUP, PGDN, LEFT, DOWN, UP, RIGHT, HOME, END,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LSFT, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, XXXXX,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ + //`--------------------' `--------------------' + ), + + [_RAISE] = LAYOUT_kc( \ + //,-----------------------------------------. ,-----------------------------------------. + ESC, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + CTLTB, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, GRV,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, BSLS, TILD,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ + //`--------------------' `--------------------' + ), + + [_ADJUST] = LAYOUT_kc( \ + //,-----------------------------------------. ,-----------------------------------------. + RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------| |------+------+------+------+------+------| + LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| + GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ + //`--------------------' `--------------------' + ) +}; + +int RGB_current_mode; + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + //matrix_write_ln(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + // set_timelog(); + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + |