diff options
Diffstat (limited to 'keyboards/crkbd')
49 files changed, 1905 insertions, 690 deletions
diff --git a/keyboards/crkbd/config.h b/keyboards/crkbd/config.h index c910d8f24..4357a218d 100644 --- a/keyboards/crkbd/config.h +++ b/keyboards/crkbd/config.h @@ -16,9 +16,19 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" +#include <serial_config.h> -#endif +#define USE_I2C +#define USE_SERIAL + +#ifdef USE_Link_Time_Optimization + // LTO has issues with macros (action_get_macro) and "functions" (fn_actions), + // so just disable them + #define NO_ACTION_MACRO + #define NO_ACTION_FUNCTION + + #define DISABLE_LEADER +#endif // USE_Link_Time_Optimization diff --git a/keyboards/crkbd/crkbd.c b/keyboards/crkbd/crkbd.c index 5e8ba8bac..d420ccda2 100644 --- a/keyboards/crkbd/crkbd.c +++ b/keyboards/crkbd/crkbd.c @@ -1 +1,10 @@ #include "crkbd.h" +#include "ssd1306.h" + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { +#ifdef SSD1306OLED + return process_record_gfx(keycode,record) && process_record_user(keycode, record); +#else + return process_record_user(keycode, record); +#endif +} diff --git a/keyboards/crkbd/crkbd.h b/keyboards/crkbd/crkbd.h index 889bcb9ae..73f2a3f07 100644 --- a/keyboards/crkbd/crkbd.h +++ b/keyboards/crkbd/crkbd.h @@ -1,8 +1,5 @@ -#ifndef CRKBD_H -#define CRKBD_H +#pragma once #ifdef KEYBOARD_crkbd_rev1 #include "rev1.h" #endif - -#endif diff --git a/keyboards/crkbd/i2c.c b/keyboards/crkbd/i2c.c index 084c890c4..4bee5c639 100644 --- a/keyboards/crkbd/i2c.c +++ b/keyboards/crkbd/i2c.c @@ -34,7 +34,7 @@ void i2c_delay(void) { // _delay_us(100); } -// Setup twi to run at 100kHz +// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) void i2c_master_init(void) { // no prescaler TWSR = 0; diff --git a/keyboards/crkbd/i2c.h b/keyboards/crkbd/i2c.h index c15b6bc50..710662c7a 100644 --- a/keyboards/crkbd/i2c.h +++ b/keyboards/crkbd/i2c.h @@ -1,5 +1,4 @@ -#ifndef I2C_H -#define I2C_H +#pragma once #include <stdint.h> @@ -15,7 +14,7 @@ #define SLAVE_BUFFER_SIZE 0x10 -// i2c SCL clock frequency +// i2c SCL clock frequency 400kHz #define SCL_CLOCK 400000L extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; @@ -45,5 +44,3 @@ extern unsigned char i2c_readNak(void); extern unsigned char i2c_read(unsigned char ack); #define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/crkbd/info.json b/keyboards/crkbd/info.json new file mode 100644 index 000000000..45a0255c1 --- /dev/null +++ b/keyboards/crkbd/info.json @@ -0,0 +1,62 @@ +{ + "keyboard_name": "crkbd rev. 1", + "url": "", + "maintainer": "qmk", + "width": 15, + "height": 4.5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0.3}, + {"label":"Q", "x":1, "y":0.3}, + {"label":"W", "x":2, "y":0.1}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0.1}, + {"label":"T", "x":5, "y":0.2}, + + {"label":"Y", "x":9, "y":0.2}, + {"label":"U", "x":10, "y":0.1}, + {"label":"I", "x":11, "y":0}, + {"label":"O", "x":12, "y":0.1}, + {"label":"P", "x":13, "y":0.3}, + {"label":"Back Space", "x":14, "y":0.3}, + + {"label":"Ctrl / Tab", "x":0, "y":1.3}, + {"label":"A", "x":1, "y":1.3}, + {"label":"S", "x":2, "y":1.1}, + {"label":"D", "x":3, "y":1}, + {"label":"F", "x":4, "y":1.1}, + {"label":"G", "x":5, "y":1.2}, + + {"label":"H", "x":9, "y":1.2}, + {"label":"J", "x":10, "y":1.1}, + {"label":"K", "x":11, "y":1}, + {"label":"L", "x":12, "y":1.1}, + {"label":";", "x":13, "y":1.3}, + {"label":"'", "x":14, "y":1.3}, + + {"label":"Shift", "x":0, "y":2.3}, + {"label":"Z", "x":1, "y":2.3}, + {"label":"X", "x":2, "y":2.1}, + {"label":"C", "x":3, "y":2}, + {"label":"V", "x":4, "y":2.1}, + {"label":"B", "x":5, "y":2.2}, + + {"label":"N", "x":9, "y":2.2}, + {"label":"M", "x":10, "y":2.1}, + {"label":",", "x":11, "y":2}, + {"label":".", "x":12, "y":2.1}, + {"label":"/", "x":13, "y":2.3}, + {"label":"Shift", "x":14, "y":2.3}, + + {"label":"GUI / KC_HANJ", "x":4, "y":3.7}, + {"label":"Lower", "x":5, "y":3.7}, + {"label":"Space", "x":6, "y":3.2, "h":1.5}, + + {"label":"Enter", "x":8, "y":3.2, "h":1.5}, + {"label":"Raise", "x":9, "y":3.7}, + {"label":"Alt / KC_HAEN", "x":10, "y":3.7} + ] + } + } +} diff --git a/keyboards/crkbd/keymaps/default/config.h b/keyboards/crkbd/keymaps/default/config.h index 8d25f7cbc..644e81365 100644 --- a/keyboards/crkbd/keymaps/default/config.h +++ b/keyboards/crkbd/keymaps/default/config.h @@ -20,10 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* Use I2C or Serial */ - -#define USE_I2C -#define USE_SERIAL //#define USE_MATRIX_I2C /* Select hand configuration */ @@ -36,7 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define USE_SERIAL_PD2 -#define PREVENT_STUCK_MODIFIERS #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 diff --git a/keyboards/crkbd/keymaps/default/keymap.c b/keyboards/crkbd/keymaps/default/keymap.c index 87661d345..1e2e57a2b 100644 --- a/keyboards/crkbd/keymaps/default/keymap.c +++ b/keyboards/crkbd/keymaps/default/keymap.c @@ -5,7 +5,6 @@ #include "split_util.h" #endif #ifdef SSD1306OLED - #include "LUFA/Drivers/Peripheral/TWI.h" #include "ssd1306.h" #endif @@ -53,7 +52,7 @@ enum macro_keycodes { #define KC_LSAD RGB_SAD #define KC_LVAI RGB_VAI #define KC_LVAD RGB_VAD -#define KC_LSMOD RGB_SMOD +#define KC_LMOD RGB_MOD #define KC_CTLTB CTL_T(KC_TAB) #define KC_GUIEI GUI_T(KC_LANG2) #define KC_ALTKN ALT_T(KC_LANG1) @@ -101,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //|------+------+------+------+------+------| |------+------+------+------+------+------| LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ //|------+------+------+------+------+------| |------+------+------+------+------+------| - LSMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \ //`--------------------' `--------------------' @@ -130,7 +129,6 @@ void matrix_init_user(void) { #endif //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h #ifdef SSD1306OLED - TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); iota_gfx_init(!has_usb()); // turns on the display #endif } @@ -181,10 +179,13 @@ void iota_gfx_task_user(void) { matrix_render_user(&matrix); matrix_update(&display, &matrix); } +#endif//SSD1306OLED bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { +#ifdef SSD1306OLED set_keylog(keycode, record); +#endif // set_timelog(); } @@ -246,4 +247,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -#endif diff --git a/keyboards/crkbd/keymaps/default/rules.mk b/keyboards/crkbd/keymaps/default/rules.mk index 6570e2f5c..16deaf45d 100644 --- a/keyboards/crkbd/keymaps/default/rules.mk +++ b/keyboards/crkbd/keymaps/default/rules.mk @@ -4,27 +4,28 @@ # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SWAP_HANDS_ENABLE = no # Enable one-hand typing +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # If you want to change the display of OLED, you need to change here -SRC += ../lib/rgb_state_reader.c \ - ../lib/layer_state_reader.c \ - ../lib/logo_reader.c \ - ../lib/keylogger.c \ - # ../lib/mode_icon_reader.c \ - # ../lib/host_led_state_reader.c \ - # ../lib/timelogger.c \ +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/crkbd/keymaps/drashna/config.h b/keyboards/crkbd/keymaps/drashna/config.h new file mode 100644 index 000000000..cbc3feeb6 --- /dev/null +++ b/keyboards/crkbd/keymaps/drashna/config.h @@ -0,0 +1,50 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + + +/* Select hand configuration */ + +// #define MASTER_LEFT +// #define MASTER_RIGHT +#define EE_HANDS + +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +// #define TAPPING_FORCE_HOLD +// #define TAPPING_TERM 100 + +#ifdef RGBLIGHT_ENABLE +#undef RGBLED_NUM +#define RGBLED_NUM 27 + +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 100 +#endif + +#ifdef AUDIO_ENABLE +#define B6_AUDIO +// #define NO_MUSIC_MODE +#endif diff --git a/keyboards/crkbd/keymaps/drashna/keymap.c b/keyboards/crkbd/keymaps/drashna/keymap.c new file mode 100644 index 000000000..678fd33b5 --- /dev/null +++ b/keyboards/crkbd/keymaps/drashna/keymap.c @@ -0,0 +1,266 @@ +#include QMK_KEYBOARD_H +#include "drashna.h" +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; +extern uint8_t is_master; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +enum crkbd_keycodes { + RGBRST = NEW_SAFE_RANGE +}; + +#define LAYOUT_crkbd_base( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ + K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \ + ) \ + LAYOUT_wrapper( \ + KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \ + KC_TAB, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, RGUI_T(KC_QUOT), \ + OS_LSFT, CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, CTL_T(K2A), OS_RSFT, \ + LT(_LOWER,KC_GRV), KC_SPC, KC_BSPC, KC_DEL, KC_ENT, RAISE \ + ) +#define LAYOUT_crkbd_base_wrapper(...) LAYOUT_crkbd_base(__VA_ARGS__) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_crkbd_base_wrapper( + _________________QWERTY_L1_________________, _________________QWERTY_R1_________________, + _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, + _________________QWERTY_L3_________________, _________________QWERTY_R3_________________ + ), + + [_COLEMAK] = LAYOUT_crkbd_base_wrapper( + _________________COLEMAK_L1________________, _________________COLEMAK_R1________________, + _________________COLEMAK_L2________________, _________________COLEMAK_R2________________, + _________________COLEMAK_L3________________, _________________COLEMAK_R3________________ + ), + + [_DVORAK] = LAYOUT_crkbd_base_wrapper( + _________________DVORAK_L1_________________, _________________DVORAK_R1_________________, + _________________DVORAK_L2_________________, _________________DVORAK_R2_________________, + _________________DVORAK_L3_________________, _________________DVORAK_R3_________________ + ), + + [_WORKMAN] = LAYOUT_crkbd_base_wrapper( + _________________WORKMAN_L1________________, _________________WORKMAN_R1________________, + _________________WORKMAN_L2________________, _________________WORKMAN_R2________________, + _________________WORKMAN_L3________________, _________________WORKMAN_R3________________ + ), + + [_MODS] = LAYOUT_wrapper( + _______, ___________________BLANK___________________, ___________________BLANK___________________, _______, + _______, ___________________BLANK___________________, ___________________BLANK___________________, _______, + KC_LSFT, ___________________BLANK___________________, ___________________BLANK___________________, KC_RSFT, + _______, _______, _______, _______, _______, _______ + ), + + [_LOWER] = LAYOUT_wrapper( + KC_F11, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11, + KC_F12, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE, + _______, _________________LOWER_L3__________________, _________________LOWER_R3__________________, _______, + _______, _______, _______, _______, _______, _______ + ), + + [_RAISE] = LAYOUT_wrapper( \ + _______, _________________RAISE_L1__________________, _________________RAISE_R1__________________, _______, + _______, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_BSLS, + _______, _________________RAISE_L3__________________, _________________RAISE_R3__________________, _______, + _______, _______, _______, _______, _______, _______ + ), + + [_ADJUST] = LAYOUT_wrapper( \ + KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET, + VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST, + _______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY, + _______, _______, _______, KC_NUKE, TG_MODS, _______ + ) +}; + +void matrix_init_keymap(void) { + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif + + #ifndef CONVERT_TO_PROTON_C + setPinOutput(D5); + writePinHigh(D5); + + setPinOutput(B0); + writePinHigh(B0); + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_logo(void); +char layer_state_str[24]; +char modifier_state_str[24]; +char host_led_state_str[24]; +char keylog_str[24] = {}; +char keylogs_str[21] = {}; +int keylogs_str_idx = 0; + +// const char *read_mode_icon(bool swap); +// void set_timelog(void); +// const char *read_timelog(void); + +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', + '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '}; + +void set_keylog(uint16_t keycode, keyrecord_t *record) { + char name = ' '; + if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; } + if (keycode < 60) { + name = code_to_name[keycode]; + } + // update keylog + snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", + record->event.key.row, record->event.key.col, + keycode, name); + + // update keylogs + if (keylogs_str_idx == sizeof(keylogs_str) - 1) { + keylogs_str_idx = 0; + for (int i = 0; i < sizeof(keylogs_str) - 1; i++) { + keylogs_str[i] = ' '; + } + } + + keylogs_str[keylogs_str_idx] = name; + keylogs_str_idx++; +} + +const char *read_keylog(void) { + return keylog_str; +} + +const char *read_keylogs(void) { + return keylogs_str; +} + + +const char* read_modifier_state(void) { + uint8_t modifiers = get_mods(); + uint8_t one_shot = get_oneshot_mods(); + + snprintf(modifier_state_str, sizeof(modifier_state_str), "Mods:%s %s %s %s", + (modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL" : " ", + (modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI" : " ", + (modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT" : " ", + (modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : " " + ); + + return modifier_state_str; +} + +const char *read_host_led_state(void) { + uint8_t leds = host_keyboard_leds(); + + snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s", + (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ", + (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ", + (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- " + ); + + return host_led_state_str; +} + +const char* read_layer_state(void) { + switch (biton32(layer_state)) { + case _RAISE: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise "); + break; + case _LOWER: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower "); + break; + case _ADJUST: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust "); + break; + default: + switch (biton32(default_layer_state)) { + case _QWERTY: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Qwerty "); + break; + case _COLEMAK: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Colemak"); + break; + case _DVORAK: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Dvorak "); + break; + case _WORKMAN: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Workman"); + break; + } + break; + } + + return layer_state_str; +} + +void matrix_scan_keymap(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + //If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_modifier_state()); + // matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + // matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + matrix_write(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} + +bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_A ... KC_SLASH: + case KC_F1 ... KC_F12: + case KC_INSERT ... KC_UP: + case KC_KP_SLASH ... KC_KP_DOT: + case KC_F13 ... KC_F24: + if (record->event.pressed) { set_keylog(keycode, record); } + break; + // set_timelog(); + } + return true; +} + +#endif diff --git a/keyboards/crkbd/keymaps/drashna/rules.mk b/keyboards/crkbd/keymaps/drashna/rules.mk new file mode 100644 index 000000000..4b70f66f7 --- /dev/null +++ b/keyboards/crkbd/keymaps/drashna/rules.mk @@ -0,0 +1,33 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +BOOTLOADER = qmk-dfu + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/rgb_state_reader.c \ + ./lib/logo_reader.c \ + # ./lib/keylogger.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/layer_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/crkbd/keymaps/edvorakjp/config.h b/keyboards/crkbd/keymaps/edvorakjp/config.h new file mode 100644 index 000000000..515591a42 --- /dev/null +++ b/keyboards/crkbd/keymaps/edvorakjp/config.h @@ -0,0 +1,24 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED +#define SWAP_SCLN + +// #define TAPPING_FORCE_HOLD +#define TAPPING_TERM 120 + +#undef RGBLED_NUM +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 100 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif // CONFIG_USER_H diff --git a/keyboards/crkbd/keymaps/edvorakjp/keymap.c b/keyboards/crkbd/keymaps/edvorakjp/keymap.c new file mode 100644 index 000000000..ae2f710a0 --- /dev/null +++ b/keyboards/crkbd/keymaps/edvorakjp/keymap.c @@ -0,0 +1,158 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "oled.h" +#endif + +#include "edvorakjp.h" + +/* + * enum custom_keycodes { + * KC_LOCK = NEW_SAFE_RANGE, + * }; + */ + +#define KC_ KC_TRNS + +#define KC_TMB1 LGUI_T(KC_TAB) +#define KC_TMB2 LSFT_T(KC_SPC) +#define KC_TMB3 TD(TD_LOWER) // act as LOWER when hold, as KC_LANG2(=English) when tapped +#define KC_TMB4 TD(TD_RAISE) // act as RAISE when hold, as KC_LANG1(=Japanese) when tapped +#define KC_TMB5 RCTL_T(KC_BSPC) +#define KC_TMB6 RALT_T(KC_ENT) +#define KC_TMB7 KC_DEL +#define KC_TMB8 RALT(KC_ENT) +#define KC_TMB9 LGUI(KC_TAB) + +#define KC_RST RESET +#define KC_DBUG DEBUG +#define KC_RTOG RGB_TOG +#define KC_EDJP EDVORAK +#define KC_QWER QWERTY + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_EDVORAK] = LAYOUT_kc( + //|----+----+----+----+----+----| |----+----+----+----+----+----| + ESC ,QUOT,COMM,DOT , Y , P , F , G , R , W , Q ,BSLS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + EQL , A , O , E , I , U , D , T , N , S , M ,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + GRV ,SCLN, X , C , V , Z , B , H , J , K , L ,SLSH, + //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----' + TMB1,TMB2,TMB3, TMB4,TMB5,TMB6 + // `----+----+----' `----+----+----' + ), + + [_EDVORAKJ1] = LAYOUT_kc( + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , AI , OU , EI , , , , , , , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , Y , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + ,ANN ,ONN ,ENN ,INN ,UNN , , , , , , , + //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----' + , , , , , + // `----+----+----' `----+----+----' + ), + + [_EDVORAKJ2] = LAYOUT_kc( + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , AI , OU , EI , , , , , , , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , Y , , , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + ,ANN ,ONN ,ENN ,INN ,UNN , , , , , , , + //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----' + , , , , , + // `----+----+----' `----+----+----' + ), + + [_QWERTY] = LAYOUT_kc( + //|----+----+----+----+----+----| |----+----+----+----+----+----| + TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + EQL , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + GRV , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,BSLS, + //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----' + , , , , , + // `----+----+----' `----+----+----' + ), + + [_LOWER] = LAYOUT_kc( + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , 1 ,EXLM, AT ,HASH,DLR , PERC,CIRC,AMPR,ASTR, 0 , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , LT ,LCBR,LPRN,LBRC, RBRC,RPRN,RCBR, GT , , , + //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----' + , , , ,TMB7,TMB8 + // `----+----+----' `----+----+----' + ), + + [_RAISE] = LAYOUT_kc( + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + ,F11 ,F12 ,PSCR,SLCK,PAUS, ,HOME,PGDN,PGUP,END , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , ,LEFT,DOWN, UP ,RGHT, , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----' + TMB9, , , , , + // `----+----+----' `----+----+----' + ), + + [_ADJUST] = LAYOUT_kc( + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , ,EXTOFF, , ,EXTON, , , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , ,QWER,WIN ,RST , RTOG,MAC ,EDJP, , , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , , , , , , + //`----+----+----+----+----+----+----| |----+----+----+----+----+----+----' + , , , , , + // `----+----+----' `----+----+----' + ) +}; + +#ifdef SSD1306OLED +void matrix_init_keymap(void) { + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + iota_gfx_init(!has_usb()); // turns on the display +} + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously +} +#endif + +#ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT +uint32_t layer_state_set_keymap(uint32_t state) { + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + switch (biton32(state)) { + case _EDVORAKJ1: + case _EDVORAKJ2: + // _EDVORAKJ1 & J2 are same colored + rgblight_sethsv_noeeprom_white(); + break; + case _LOWER: + rgblight_sethsv_noeeprom_red(); + break; + case _RAISE: + rgblight_sethsv_noeeprom_blue(); + break; + case _ADJUST: + rgblight_sethsv_noeeprom_green(); + break; + default: // for any other layers, or the default layer + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_GRADIENT + 3); + rgblight_sethsv_noeeprom_red(); + break; + } + return state; +} +#endif diff --git a/keyboards/crkbd/keymaps/edvorakjp/oled.c b/keyboards/crkbd/keymaps/edvorakjp/oled.c new file mode 100644 index 000000000..e4cccf3e7 --- /dev/null +++ b/keyboards/crkbd/keymaps/edvorakjp/oled.c @@ -0,0 +1,82 @@ +#include <string.h> +#include "oled.h" + +// NOTE: Redefined to avoid to use snprintf(); It makes size of firmware big. +const char *read_mode_icon(bool windows_mode) { + static const char logo[][2][3] = {{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}}; + static char mode_icon[10]; + + int mode_number = windows_mode ? 1 : 0; + strcpy(mode_icon, logo[mode_number][0]); + + strcat(mode_icon, "\n"); + strcat(mode_icon, logo[mode_number][1]); + + return mode_icon; +} + +const char *read_layer_state(void) { + static char layer_state_str[24]; + char layer_name[17]; + + switch (biton32(layer_state)) { + case L_BASE: + strcpy(layer_name, default_layer_state == 1UL<<_EDVORAK ? "EDVORAK" : "QWERTY"); + break; + case _EDVORAKJ1: + case _EDVORAKJ2: + strcpy(layer_name, "JP_EXT"); + break; + case _RAISE: + strcpy(layer_name, "Raise"); + break; + case _LOWER: + strcpy(layer_name, "Lower"); + break; + case _ADJUST: + strcpy(layer_name, "Adjust"); + break; + default: + snprintf(layer_name, sizeof(layer_name), "Undef-%ld", layer_state); + } + + strcpy(layer_state_str, "Layer: "); + + strcat(layer_state_str, layer_name); + strcat(layer_state_str, "\n"); + return layer_state_str; +} + +const char *read_host_led_state(void) { + static char led_str[24]; + bool ext_status = get_enable_jp_extra_layer() && get_japanese_mode(); + strcpy(led_str, ext_status ? "EXT" : " "); + + strcat(led_str, (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? " NMLK" : " "); + strcat(led_str, (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? " CAPS" : " "); + strcat(led_str, (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? " SCLK" : " "); + return led_str; +} + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + if (is_master) { + matrix_write(&matrix, read_mode_icon(!get_enable_kc_lang())); + matrix_write(&matrix, " "); + matrix_write(&matrix, read_layer_state()); + matrix_write(&matrix, read_host_led_state()); + } else { + matrix_write(&matrix, read_logo()); + } + matrix_update(&display, &matrix); +} diff --git a/keyboards/crkbd/keymaps/edvorakjp/oled.h b/keyboards/crkbd/keymaps/edvorakjp/oled.h new file mode 100644 index 000000000..896347aea --- /dev/null +++ b/keyboards/crkbd/keymaps/edvorakjp/oled.h @@ -0,0 +1,24 @@ +#ifndef OLED_USER_H +#define OLED_USER_H + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#include "ssd1306.h" +#include "edvorakjp.h" + +//assign the right code to your layers for OLED display +#define L_BASE 0 + +extern uint8_t is_master; +extern bool japanese_mode; + +// method prototypes defined in crkbd/lib +extern const char *read_logo(void); + +const char *read_mode_icon(bool swap); +const char *read_layer_state(void); +const char *read_host_led_state(void); +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source); +void iota_gfx_task_user(void); + +#endif // OLED_CONFIG_USER_H diff --git a/keyboards/crkbd/keymaps/edvorakjp/readme.md b/keyboards/crkbd/keymaps/edvorakjp/readme.md new file mode 100644 index 000000000..dd406523d --- /dev/null +++ b/keyboards/crkbd/keymaps/edvorakjp/readme.md @@ -0,0 +1,21 @@ +# edvorakjp + +Epaew's Enhanced Dvorak layout for Japanese Programmer +see [here](/users/edvorakjp) for more informations. + +## License + +Copyright 2018 Ryo Maeda epaew.333@gmail.com @epaew + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. diff --git a/keyboards/crkbd/keymaps/edvorakjp/rules.mk b/keyboards/crkbd/keymaps/edvorakjp/rules.mk new file mode 100644 index 000000000..b4f6d2f1f --- /dev/null +++ b/keyboards/crkbd/keymaps/edvorakjp/rules.mk @@ -0,0 +1,32 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing +TAP_DANCE_ENABLE = yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/logo_reader.c \ + oled.c \ + # ./lib/rgb_state_reader.c \ + # ./lib/layer_state_reader.c \ + # ./lib/keylogger.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/crkbd/keymaps/like_jis/config.h b/keyboards/crkbd/keymaps/like_jis/config.h index 4c31cc779..a061b4fb0 100644 --- a/keyboards/crkbd/keymaps/like_jis/config.h +++ b/keyboards/crkbd/keymaps/like_jis/config.h @@ -20,10 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* Use I2C or Serial */ - -#define USE_I2C -#define USE_SERIAL //#define USE_MATRIX_I2C /* Select hand configuration */ @@ -38,7 +34,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PREVENT_STUCK_MODIFIERS #define TAPPING_FORCE_HOLD -#define TAPPING_TERM 150 +#define TAPPING_TERM 250 #undef RGBLED_NUM #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/crkbd/keymaps/like_jis/glcdfont.c b/keyboards/crkbd/keymaps/like_jis/glcdfont.c deleted file mode 100644 index 4e7b27bc0..000000000 --- a/keyboards/crkbd/keymaps/like_jis/glcdfont.c +++ /dev/null @@ -1,244 +0,0 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. - -#ifndef FONT5X7_H -#define FONT5X7_H - -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/pgmspace.h> -#elif defined(ESP8266) - #include <pgmspace.h> -#else - #define PROGMEM -#endif - -// Standard ASCII 5x7 font - -static const unsigned char font[] PROGMEM = { -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, -0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, -0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, -0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, -0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, -0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, -0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, -0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, -0x00, 0x18, 0x24, 0x18, 0x00, 0x00, -0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, -0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, -0x26, 0x29, 0x79, 0x29, 0x26, 0x00, -0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, -0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, -0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, -0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, -0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, -0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, -0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, -0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, -0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, -0x60, 0x60, 0x60, 0x60, 0x60, 0x00, -0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, -0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, -0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, -0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, -0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, -0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, -0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, -0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, -0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, -0x00, 0x07, 0x00, 0x07, 0x00, 0x00, -0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, -0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, -0x23, 0x13, 0x08, 0x64, 0x62, 0x00, -0x36, 0x49, 0x56, 0x20, 0x50, 0x00, -0x00, 0x08, 0x07, 0x03, 0x00, 0x00, -0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, -0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, -0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, -0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, -0x00, 0x80, 0x70, 0x30, 0x00, 0x00, -0x08, 0x08, 0x08, 0x08, 0x08, 0x00, -0x00, 0x00, 0x60, 0x60, 0x00, 0x00, -0x20, 0x10, 0x08, 0x04, 0x02, 0x00, -0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, -0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, -0x72, 0x49, 0x49, 0x49, 0x46, 0x00, -0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, -0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, -0x27, 0x45, 0x45, 0x45, 0x39, 0x00, -0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, -0x41, 0x21, 0x11, 0x09, 0x07, 0x00, -0x36, 0x49, 0x49, 0x49, 0x36, 0x00, -0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, -0x00, 0x00, 0x14, 0x00, 0x00, 0x00, -0x00, 0x40, 0x34, 0x00, 0x00, 0x00, -0x00, 0x08, 0x14, 0x22, 0x41, 0x00, -0x14, 0x14, 0x14, 0x14, 0x14, 0x00, -0x00, 0x41, 0x22, 0x14, 0x08, 0x00, -0x02, 0x01, 0x59, 0x09, 0x06, 0x00, -0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, -0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, -0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, -0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, -0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, -0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, -0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, -0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, -0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, -0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, -0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, -0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, -0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, -0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, -0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, -0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, -0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, -0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, -0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, -0x26, 0x49, 0x49, 0x49, 0x32, 0x00, -0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, -0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, -0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, -0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, -0x63, 0x14, 0x08, 0x14, 0x63, 0x00, -0x03, 0x04, 0x78, 0x04, 0x03, 0x00, -0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, -0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, -0x02, 0x04, 0x08, 0x10, 0x20, 0x00, -0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, -0x04, 0x02, 0x01, 0x02, 0x04, 0x00, -0x40, 0x40, 0x40, 0x40, 0x40, 0x00, -0x00, 0x03, 0x07, 0x08, 0x00, 0x00, -0x20, 0x54, 0x54, 0x78, 0x40, 0x00, -0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, -0x38, 0x44, 0x44, 0x44, 0x28, 0x00, -0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, -0x38, 0x54, 0x54, 0x54, 0x18, 0x00, -0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, -0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, -0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, -0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, -0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, -0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, -0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, -0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, -0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, -0x38, 0x44, 0x44, 0x44, 0x38, 0x00, -0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, -0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, -0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, -0x48, 0x54, 0x54, 0x54, 0x24, 0x00, -0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, -0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, -0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, -0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, -0x44, 0x28, 0x10, 0x28, 0x44, 0x00, -0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, -0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, -0x00, 0x08, 0x36, 0x41, 0x00, 0x00, -0x00, 0x00, 0x77, 0x00, 0x00, 0x00, -0x00, 0x41, 0x36, 0x08, 0x00, 0x00, -0x02, 0x01, 0x02, 0x04, 0x02, 0x00, -0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x0E, 0x3F, 0xFF, 0xFF, -0xFF, 0xFF, 0xFE, 0xE0, 0x80, 0x00, -0x00, 0x00, 0x00, 0x00, 0x1E, 0xBE, -0x7F, 0xFF, 0xFF, 0xFE, 0xFE, 0xF0, -0xE0, 0xC0, 0x80, 0x00, 0x0E, 0xEF, -0xDF, 0xDE, 0xBE, 0x3C, 0x38, 0x70, -0xE0, 0xDD, 0xBB, 0x7B, 0x07, 0x0E, -0x0E, 0x0C, 0x98, 0xF0, 0xE0, 0xF0, -0xF0, 0xF8, 0x78, 0x3C, 0x1C, 0x1E, -0x0E, 0x0E, 0x0F, 0x0F, 0x0F, 0x0F, -0x1F, 0xFE, 0xFE, 0xF8, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, -0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, -0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, -0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, -0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, -0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, -0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, -0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x01, 0x03, -0x0F, 0x3F, 0xFF, 0xFF, 0xFF, 0xFE, -0xF8, 0xF0, 0xE0, 0xC0, 0x80, 0x7F, -0xFF, 0xFE, 0xFD, 0xFB, 0x1B, 0x07, -0x07, 0x0F, 0x1F, 0x1F, 0x1E, 0x1D, -0x0B, 0x07, 0x01, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, -0xF8, 0xFE, 0xFF, 0xFF, 0x1F, 0x07, -0x01, 0x01, 0x01, 0x03, 0x06, 0x06, -0x0C, 0x0C, 0x08, 0x0C, 0x0C, 0x0E, -0x07, 0x83, 0xC1, 0xE0, 0x70, 0x30, -0x18, 0x1C, 0x7C, 0xCC, 0x8C, 0xDC, -0xF8, 0xC0, 0xE0, 0xE0, 0x70, 0xB8, -0xF0, 0x60, 0x00, 0x00, 0x80, 0xC0, -0xE0, 0xF0, 0x70, 0xF8, 0xFC, 0xFC, -0x3C, 0x30, 0x38, 0xF8, 0xF8, 0xF8, -0x78, 0x00, 0x80, 0x80, 0xC0, 0xE0, -0x70, 0x38, 0x38, 0x9C, 0xDC, 0xFC, -0x7C, 0x38, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, -0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, -0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, -0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, -0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, -0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, -0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, -0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x01, 0x03, 0x07, -0x1F, 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, -0x7E, 0x7D, 0x3B, 0x17, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x07, -0x0F, 0x1F, 0x3F, 0x3F, 0x7E, 0x7C, -0x78, 0x70, 0x70, 0x70, 0x70, 0x70, -0x70, 0x78, 0x38, 0x18, 0x1C, 0x0E, -0x07, 0x0F, 0x1F, 0x3F, 0x3C, 0x38, -0x38, 0x18, 0x0C, 0x06, 0x03, 0x01, -0x01, 0x01, 0x01, 0x0E, 0x1F, 0x1F, -0x1C, 0x1C, 0x1E, 0x0F, 0x0F, 0x03, -0x1D, 0x0E, 0x07, 0x03, 0x01, 0x00, -0x00, 0x0E, 0x1F, 0x1F, 0x1D, 0x1E, -0x0F, 0x07, 0x03, 0x03, 0x0F, 0x1F, -0x1F, 0x19, 0x19, 0x19, 0x19, 0x0C, -0x0C, 0x04, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -}; -#endif // FONT5X7_H diff --git a/keyboards/crkbd/keymaps/like_jis/keymap.c b/keyboards/crkbd/keymaps/like_jis/keymap.c index 31b5230b1..b1b6c64b1 100644 --- a/keyboards/crkbd/keymaps/like_jis/keymap.c +++ b/keyboards/crkbd/keymaps/like_jis/keymap.c @@ -5,9 +5,9 @@ #include "split_util.h" #endif #ifdef SSD1306OLED - #include "LUFA/Drivers/Peripheral/TWI.h" #include "ssd1306.h" #endif +#include "oled_helper.h" extern keymap_config_t keymap_config; @@ -22,27 +22,35 @@ extern uint8_t is_master; // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 +enum layer_number { + _BASE = 0, + _LOWER, + _RAISE, + _ADJUST, +}; enum custom_keycodes { LOWER = SAFE_RANGE, RAISE, ADJUST, + KANJI, RGBRST }; -#define KC______ KC_TRNS -#define KC_XXXXX KC_NO -#define KC_KANJI KC_GRV +enum tapdances{ + TD_CODO = 0, + // TD_MNUB, +}; +// Layer Mode aliases #define KC_LOWER LOWER #define KC_RAISE RAISE -#define KC_RST RESET +#define KC______ KC_TRNS +#define KC_XXXXX KC_NO +#define KC_KANJI KANJI +#define KC_RST RESET #define KC_LRST RGBRST #define KC_LTOG RGB_TOG #define KC_LHUI RGB_HUI @@ -51,32 +59,42 @@ enum custom_keycodes { #define KC_LSAD RGB_SAD #define KC_LVAI RGB_VAI #define KC_LVAD RGB_VAD -#define KC_LSMOD RGB_SMOD - +#define KC_LMOD RGB_MOD #define KC_KNRM AG_NORM #define KC_KSWP AG_SWAP -#define KC_GUAP LALT_T(KC_APP) + +#define KC_TBSF LSFT_T(KC_TAB) +// #define KC_SPSF LSFT_T(KC_SPC) +#define KC_ALAP LALT_T(KC_APP) + +#define KC_CODO TD(TD_CODO) +// #define KC_MNUB TD(TD_MNUB) + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT), + // [TD_MNUB] = ACTION_TAP_DANCE_DOUBLE(KC_MINS, LSFT(KC_RO)), +}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_kc( \ + [_BASE] = LAYOUT_kc( \ //,-----------------------------------------. ,-----------------------------------------. ESC, Q, W, E, R, T, Y, U, I, O, P, MINS,\ //|------+------+------+------+------+------| |------+------+------+------+------+------| - LSFT, A, S, D, F, G, H, J, K, L, UP, ENT,\ + TBSF, A, S, D, F, G, H, J, K, L, UP, ENT,\ //|------+------+------+------+------+------| |------+------+------+------+------+------| - LCTRL, Z, X, C, V, B, N, M, COMM, LEFT, DOWN, RGHT,\ + LCTRL, Z, X, C, V, B, N, M, CODO, LEFT, DOWN, RGHT,\ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - LGUI, LOWER, BSPC, SPC, RAISE, GUAP \ + LGUI, LOWER, BSPC, SPC, RAISE, ALAP \ //`--------------------' `--------------------' ), [_LOWER] = LAYOUT_kc( \ //,-----------------------------------------. ,-----------------------------------------. - TAB, F1, F2, F3, F4, F5, XXXXX, MINS, EQL, JYEN, LBRC, RBRC,\ + _____, F1, F2, F3, F4, F5, XXXXX, MINS, EQL, JYEN, LBRC, RBRC,\ //|------+------+------+------+------+------| |------+------+------+------+------+------| _____, F6, F7, F8, F9, F10, XXXXX, XXXXX, XXXXX, SCLN, QUOT, BSLS,\ //|------+------+------+------+------+------| |------+------+------+------+------+------| - _____, F11, F12, XXXXX, KANJI, ENT, XXXXX, XXXXX, COMM, DOT, SLSH, RO,\ + _____, F11, F12, TAB, KANJI, ENT, XXXXX, XXXXX, COMM, DOT, SLSH, RO,\ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| _____, _____, DEL, _____, _____, APP \ //`--------------------' `--------------------' @@ -84,11 +102,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = LAYOUT_kc( \ //,-----------------------------------------. ,-----------------------------------------. - _____, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, XXXXX,\ + _____, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, PSLS,\ //|------+------+------+------+------+------| |------+------+------+------+------+------| - _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, 4, 5, 6, QUOT, XXXXX,\ + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, QUOT, 4, 5, 6, PPLS, PAST,\ //|------+------+------+------+------+------| |------+------+------+------+------+------| - _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, 0, 1, 2, 3, DOT, XXXXX,\ + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, 0, 1, 2, 3, DOT, PMNS,\ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| _____, _____, BSPC, _____, _____, LALT \ //`--------------------' `--------------------' @@ -96,153 +114,182 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_kc( \ //,-----------------------------------------. ,-----------------------------------------. - _____, RST, LRST, KNRM, KSWP,XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + _____, RST, LRST, KNRM, KSWP, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ //|------+-------+------+------+------+-----| |------+------+------+------+------+------| - _____, LTOG, LHUI, LSAI, LVAI,XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, PGUP, XXXXX,\ + _____, LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, PGUP, XXXXX,\ //|------+-------+------+------+------+-----| |------+------+------+------+------+------| - _____, LSMOD, LHUD, LSAD, LVAD,XXXXX, XXXXX, XXXXX, XXXXX, HOME, PGDN, END,\ + _____, LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, HOME, PGDN, END,\ //|------+------+------+------+------+------+------| |------+------+------+------+------+------+------| _____, _____, XXXXX, _____, _____, XXXXX \ //`--------------------' `--------------------' ) }; -int RGB_current_mode; +#define L_BASE _BASE +#define L_LOWER (1<<_LOWER) +#define L_RAISE (1<<_RAISE) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) -// Setting ADJUST layer RGB back to default -inline void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { - layer_on(layer3); - } else { - layer_off(layer3); +#ifdef SSD1306OLED +typedef struct { + uint8_t state; + char name[8]; +}LAYER_DISPLAY_NAME; + +#define LAYER_DISPLAY_MAX 5 +const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = { + {L_BASE, "Base"}, + {L_BASE + 1, "Base"}, + {L_LOWER, "Lower"}, + {L_RAISE, "Raise"}, + {L_ADJUST_TRI, "Adjust"} +}; + +static inline const char* get_leyer_status(void) { + + for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) { + if (layer_state == 0 && layer_display_name[i].state == default_layer_state) { + + return layer_display_name[i].name; + } else if (layer_state != 0 && layer_display_name[i].state == layer_state) { + + return layer_display_name[i].name; + } } -} -void matrix_init_user(void) { - #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; - #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); - iota_gfx_init(!has_usb()); // turns on the display - #endif + return "?"; } -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED +static char layer_status_buf[24] = "Layer state ready.\n"; +static inline void update_keymap_status(void) { + snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n", + keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status()); +} -// When add source files to SRC in rules.mk, you can use functions. -const char *read_layer_state(void); -const char *read_logo(void); -void set_keylog(uint16_t keycode, keyrecord_t *record); -const char *read_keylog(void); -const char *read_keylogs(void); +static inline void render_keymap_status(struct CharacterMatrix *matrix) { -// const char *read_mode_icon(bool swap); -// const char *read_host_led_state(void); -// void set_timelog(void); -// const char *read_timelog(void); + matrix_write(matrix, layer_status_buf); +} + +#define UPDATE_KEYMAP_STATUS() update_keymap_status() +#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a) -#ifdef RGBLIGHT_ENABLE - const char *read_rgb_info(void); - #define RENDER_RGB_INFO(m) matrix_write_ln(m, (const char*)read_rgb_info()) #else - #define RENDER_RGB_INFO(m) + +#define UPDATE_KEYMAP_STATUS() +#define RENDER_KEYMAP_STATUS(a) + #endif +static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) { -void matrix_scan_user(void) { - iota_gfx_task(); + pressed ? layer_on(layer1) : layer_off(layer1); + IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3); } -inline void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { - // If you want to change the display of OLED, you need to change here - matrix_write_ln(matrix, read_layer_state()); - matrix_write_ln(matrix, read_keylog()); - RENDER_RGB_INFO(matrix); - // matrix_write_ln(matrix, read_keylogs()); - // matrix_write_ln(matrix, read_host_led_state()); - - // matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); - // matrix_write_ln(matrix, read_timelog()); - } else { - matrix_write(matrix, read_logo()); +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + UPDATE_KEY_STATUS(keycode, record); + + bool result = false; + switch (keycode) { + case LOWER: + update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST); + break; + case RAISE: + update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST); + break; + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; } + + UPDATE_KEYMAP_STATUS(); + return result; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously } -inline void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { +static inline void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { if (memcmp(dest->display, source->display, sizeof(dest->display))) { memcpy(dest->display, source->display, sizeof(dest->display)); dest->dirty = true; } } -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); +static inline void render_status(struct CharacterMatrix *matrix) { + + UPDATE_LED_STATUS(); + RENDER_LED_STATUS(matrix); + RENDER_KEYMAP_STATUS(matrix); + UPDATE_LOCK_STATUS(); + RENDER_LOCK_STATUS(matrix); + RENDER_KEY_STATUS(matrix); } -#endif +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - #ifdef SSD1306OLED - if (record->event.pressed) { - set_keylog(keycode, record); - // set_timelog(); + #if DEBUG_TO_SCREEN + if (debug_enable) { + return; } #endif - switch (keycode) { - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - break; - - #ifdef RGBLIGHT_ENABLE - case RGB_MOD: - if (record->event.pressed) { - rgblight_mode(RGB_current_mode); - rgblight_step(); - RGB_current_mode = rgblight_config.mode; - } - break; - case RGBRST: - if (record->event.pressed) { - eeconfig_update_rgblight_default(); - rgblight_enable(); - RGB_current_mode = rgblight_config.mode; - } - break; - #endif - default: - return true; + matrix_clear(&matrix); + if (is_master) { + render_status(&matrix); + } else { + RENDER_LOGO(&matrix); } - return false; + matrix_update(&display, &matrix); } + +#endif diff --git a/keyboards/crkbd/keymaps/like_jis/oled_helper.c b/keyboards/crkbd/keymaps/like_jis/oled_helper.c new file mode 100644 index 000000000..500d3c0dc --- /dev/null +++ b/keyboards/crkbd/keymaps/like_jis/oled_helper.c @@ -0,0 +1,83 @@ +#ifdef SSD1306OLED +#include QMK_KEYBOARD_H +#include "ssd1306.h" + +void render_logo(struct CharacterMatrix *matrix) { + + const char logo_buf[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + + matrix_write(matrix, logo_buf); +} + +static char keylog_buf[24] = "Key state ready."; +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', ' ', '-', ' ', '@', ' ', ' ', + ' ', ';', ':', ' ', ',', '.', '/', ' ', ' ', ' '}; + +void update_key_status(uint16_t keycode, keyrecord_t *record) { + + if (!record->event.pressed) return; + + char name = (keycode < 60) ? code_to_name[keycode] : ' '; + snprintf(keylog_buf, sizeof(keylog_buf) - 1, "Key:%dx%d %2x %c", + record->event.key.row, record->event.key.col, + (uint16_t)keycode, name); +} + +void render_key_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, keylog_buf); +} + +static char lock_buf[24] = "Lock state ready.\n"; +void update_lock_status(void) { + + uint8_t leds = host_keyboard_leds(); + char *num_lock = (leds & (1<<USB_LED_NUM_LOCK)) ? "Num" : ""; + char *caps_lock = (leds & (1<<USB_LED_CAPS_LOCK)) ? "Caps" : ""; + char *scrl_lock = (leds & (1<<USB_LED_SCROLL_LOCK)) ? "Scrn" : ""; + snprintf(lock_buf, sizeof(lock_buf) - 1, "Lock:%s %s %s\n", + num_lock, caps_lock, scrl_lock); +} + +void render_lock_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, lock_buf); +} + +#ifdef RGBLIGHT_ENABLE +extern rgblight_config_t rgblight_config; + +static char led_buf[24] = "LED state ready.\n"; +rgblight_config_t rgblight_config_bak; +void update_led_status(void) { + + if (rgblight_config_bak.enable != rgblight_config.enable || + rgblight_config_bak.mode != rgblight_config.mode || + rgblight_config_bak.hue != rgblight_config.hue || + rgblight_config_bak.sat != rgblight_config.sat || + rgblight_config_bak.val != rgblight_config.val + ) { + snprintf(led_buf, sizeof(led_buf) - 1, "LED%c:%2d hsv:%2d %2d %2d\n", + rgblight_config.enable ? '*' : '.', (uint8_t)rgblight_config.mode, + (uint8_t)(rgblight_config.hue / RGBLIGHT_HUE_STEP), + (uint8_t)(rgblight_config.sat / RGBLIGHT_SAT_STEP), + (uint8_t)(rgblight_config.val / RGBLIGHT_VAL_STEP)); + rgblight_config_bak = rgblight_config; + } +} + +void render_led_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, led_buf); +} +#endif +#endif diff --git a/keyboards/crkbd/keymaps/like_jis/oled_helper.h b/keyboards/crkbd/keymaps/like_jis/oled_helper.h new file mode 100644 index 000000000..44628a526 --- /dev/null +++ b/keyboards/crkbd/keymaps/like_jis/oled_helper.h @@ -0,0 +1,35 @@ +#ifdef SSD1306OLED + +void render_logo(struct CharacterMatrix *matrix); +void update_key_status(uint16_t keycode, keyrecord_t *record); +void render_key_status(struct CharacterMatrix *matrix); +void update_lock_status(void); +void render_lock_status(struct CharacterMatrix *matrix); + +#define RENDER_LOGO(a) render_logo(a) +#define UPDATE_KEY_STATUS(a, b) update_key_status(a, b) +#define RENDER_KEY_STATUS(a) render_key_status(a) +#define UPDATE_LOCK_STATUS() update_lock_status() +#define RENDER_LOCK_STATUS(a) render_lock_status(a) + +#ifdef RGBLIGHT_ENABLE + void update_led_status(void); + void render_led_status(struct CharacterMatrix *matrix); + #define UPDATE_LED_STATUS() update_led_status() + #define RENDER_LED_STATUS(a) render_led_status(a) +#else + #define UPDATE_LED_STATUS() + #define RENDER_LED_STATUS(a) +#endif + +#else + +#define RENDER_LOGO(a) +#define UPDATE_KEY_STATUS(a, b) +#define RENDER_KEY_STATUS(a) +#define UPDATE_LOCK_STATUS() +#define RENDER_LOCK_STATUS(a) +#define UPDATE_LED_STATUS() +#define RENDER_LED_STATUS(a) + +#endif diff --git a/keyboards/crkbd/keymaps/like_jis/rules.mk b/keyboards/crkbd/keymaps/like_jis/rules.mk index 6570e2f5c..92f4693aa 100644 --- a/keyboards/crkbd/keymaps/like_jis/rules.mk +++ b/keyboards/crkbd/keymaps/like_jis/rules.mk @@ -4,27 +4,29 @@ # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SWAP_HANDS_ENABLE = no # Enable one-hand typing +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing +TAP_DANCE_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +Link_Time_Optimization = yes # if firmware size over limit, try this option + +ifeq ($(strip $(Link_Time_Optimization)),yes) + EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization +endif + # If you want to change the display of OLED, you need to change here -SRC += ../lib/rgb_state_reader.c \ - ../lib/layer_state_reader.c \ - ../lib/logo_reader.c \ - ../lib/keylogger.c \ - # ../lib/mode_icon_reader.c \ - # ../lib/host_led_state_reader.c \ - # ../lib/timelogger.c \ +SRC += ./lib/glcdfont.c \ + oled_helper.c \ diff --git a/keyboards/crkbd/keymaps/default/glcdfont.c b/keyboards/crkbd/lib/glcdfont.c index 4e7b27bc0..f7567c57c 100644 --- a/keyboards/crkbd/keymaps/default/glcdfont.c +++ b/keyboards/crkbd/lib/glcdfont.c @@ -14,8 +14,7 @@ #endif // Standard ASCII 5x7 font - -static const unsigned char font[] PROGMEM = { +const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, @@ -119,7 +118,7 @@ static const unsigned char font[] PROGMEM = { 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, -0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, +0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, @@ -128,8 +127,8 @@ static const unsigned char font[] PROGMEM = { 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, -0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, -0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, +0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, +0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, @@ -145,24 +144,24 @@ static const unsigned char font[] PROGMEM = { 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x0E, 0x3F, 0xFF, 0xFF, -0xFF, 0xFF, 0xFE, 0xE0, 0x80, 0x00, -0x00, 0x00, 0x00, 0x00, 0x1E, 0xBE, -0x7F, 0xFF, 0xFF, 0xFE, 0xFE, 0xF0, -0xE0, 0xC0, 0x80, 0x00, 0x0E, 0xEF, -0xDF, 0xDE, 0xBE, 0x3C, 0x38, 0x70, -0xE0, 0xDD, 0xBB, 0x7B, 0x07, 0x0E, -0x0E, 0x0C, 0x98, 0xF0, 0xE0, 0xF0, -0xF0, 0xF8, 0x78, 0x3C, 0x1C, 0x1E, -0x0E, 0x0E, 0x0F, 0x0F, 0x0F, 0x0F, -0x1F, 0xFE, 0xFE, 0xF8, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0xC0, 0xE0, +0xF0, 0xF8, 0xF8, 0x18, 0x00, 0xC0, +0xF0, 0xFC, 0xFE, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x80, 0xC0, 0xE0, 0xE0, +0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, +0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, +0x80, 0xC0, 0xE0, 0xE0, 0xE0, 0xE0, +0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80, +0x00, 0x00, 0x00, 0xE0, 0xE0, 0xC0, +0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0x00, +0x00, 0xE0, 0xE0, 0xC0, 0xC0, 0xE0, +0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80, +0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, +0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, +0xE0, 0xE0, 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, @@ -177,25 +176,25 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x01, 0x03, -0x0F, 0x3F, 0xFF, 0xFF, 0xFF, 0xFE, -0xF8, 0xF0, 0xE0, 0xC0, 0x80, 0x7F, -0xFF, 0xFE, 0xFD, 0xFB, 0x1B, 0x07, -0x07, 0x0F, 0x1F, 0x1F, 0x1E, 0x1D, -0x0B, 0x07, 0x01, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, -0xF8, 0xFE, 0xFF, 0xFF, 0x1F, 0x07, -0x01, 0x01, 0x01, 0x03, 0x06, 0x06, -0x0C, 0x0C, 0x08, 0x0C, 0x0C, 0x0E, -0x07, 0x83, 0xC1, 0xE0, 0x70, 0x30, -0x18, 0x1C, 0x7C, 0xCC, 0x8C, 0xDC, -0xF8, 0xC0, 0xE0, 0xE0, 0x70, 0xB8, -0xF0, 0x60, 0x00, 0x00, 0x80, 0xC0, -0xE0, 0xF0, 0x70, 0xF8, 0xFC, 0xFC, -0x3C, 0x30, 0x38, 0xF8, 0xF8, 0xF8, -0x78, 0x00, 0x80, 0x80, 0xC0, 0xE0, -0x70, 0x38, 0x38, 0x9C, 0xDC, 0xFC, -0x7C, 0x38, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0xF8, 0xFC, 0xFE, +0xFF, 0xE0, 0x00, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0x80, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0x1F, 0x07, 0x01, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0xFF, 0xFF, 0xFF, 0x81, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x81, +0xC3, 0xC3, 0xC3, 0x00, 0x00, 0xFF, +0xFF, 0xFF, 0x81, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x81, 0xFF, 0xFF, +0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, +0x01, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0xFF, 0xFF, 0xFF, 0x01, 0x00, +0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, +0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, +0x9D, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, +0x1C, 0x9D, 0xDF, 0xDF, 0xDF, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, @@ -209,25 +208,25 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F, +0x3F, 0x3F, 0x3F, 0x3F, 0x1F, 0x1F, +0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x3F, +0x3F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, +0x7F, 0x7C, 0x78, 0x78, 0x38, 0x1C, +0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x01, 0x03, 0x07, 0x07, +0x07, 0x07, 0x07, 0x07, 0x07, 0x07, +0x03, 0x01, 0x00, 0x00, 0x00, 0x00, +0x01, 0x03, 0x07, 0x07, 0x07, 0x07, +0x07, 0x07, 0x07, 0x07, 0x03, 0x01, +0x00, 0x00, 0x00, 0x07, 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x01, 0x03, 0x07, -0x1F, 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, -0x7E, 0x7D, 0x3B, 0x17, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x07, 0x07, 0x07, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x07, 0x07, +0x07, 0x00, 0x00, 0x00, 0x01, 0x03, +0x07, 0x07, 0x07, 0x07, 0x07, 0x07, +0x07, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x07, -0x0F, 0x1F, 0x3F, 0x3F, 0x7E, 0x7C, -0x78, 0x70, 0x70, 0x70, 0x70, 0x70, -0x70, 0x78, 0x38, 0x18, 0x1C, 0x0E, -0x07, 0x0F, 0x1F, 0x3F, 0x3C, 0x38, -0x38, 0x18, 0x0C, 0x06, 0x03, 0x01, -0x01, 0x01, 0x01, 0x0E, 0x1F, 0x1F, -0x1C, 0x1C, 0x1E, 0x0F, 0x0F, 0x03, -0x1D, 0x0E, 0x07, 0x03, 0x01, 0x00, -0x00, 0x0E, 0x1F, 0x1F, 0x1D, 0x1E, -0x0F, 0x07, 0x03, 0x03, 0x0F, 0x1F, -0x1F, 0x19, 0x19, 0x19, 0x19, 0x0C, -0x0C, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, diff --git a/keyboards/crkbd/keymaps/lib/host_led_state_reader.c b/keyboards/crkbd/lib/host_led_state_reader.c index 41ac55dc2..41ac55dc2 100644 --- a/keyboards/crkbd/keymaps/lib/host_led_state_reader.c +++ b/keyboards/crkbd/lib/host_led_state_reader.c diff --git a/keyboards/crkbd/keymaps/lib/keylogger.c b/keyboards/crkbd/lib/keylogger.c index 8f2a8ce3c..8f2a8ce3c 100644 --- a/keyboards/crkbd/keymaps/lib/keylogger.c +++ b/keyboards/crkbd/lib/keylogger.c diff --git a/keyboards/crkbd/keymaps/lib/layer_state_reader.c b/keyboards/crkbd/lib/layer_state_reader.c index eddb71337..eddb71337 100644 --- a/keyboards/crkbd/keymaps/lib/layer_state_reader.c +++ b/keyboards/crkbd/lib/layer_state_reader.c diff --git a/keyboards/crkbd/keymaps/lib/logo_reader.c b/keyboards/crkbd/lib/logo_reader.c index 1bc1503a6..1bc1503a6 100644 --- a/keyboards/crkbd/keymaps/lib/logo_reader.c +++ b/keyboards/crkbd/lib/logo_reader.c diff --git a/keyboards/crkbd/keymaps/lib/mode_icon_reader.c b/keyboards/crkbd/lib/mode_icon_reader.c index 04c226506..04c226506 100644 --- a/keyboards/crkbd/keymaps/lib/mode_icon_reader.c +++ b/keyboards/crkbd/lib/mode_icon_reader.c diff --git a/keyboards/crkbd/keymaps/lib/rgb_state_reader.c b/keyboards/crkbd/lib/rgb_state_reader.c index e0efe2e52..e0efe2e52 100644 --- a/keyboards/crkbd/keymaps/lib/rgb_state_reader.c +++ b/keyboards/crkbd/lib/rgb_state_reader.c diff --git a/keyboards/crkbd/keymaps/lib/timelogger.c b/keyboards/crkbd/lib/timelogger.c index 69828a3a0..69828a3a0 100644 --- a/keyboards/crkbd/keymaps/lib/timelogger.c +++ b/keyboards/crkbd/lib/timelogger.c diff --git a/keyboards/crkbd/pro_micro.h b/keyboards/crkbd/pro_micro.h index f9e7ed75d..366633372 100644 --- a/keyboards/crkbd/pro_micro.h +++ b/keyboards/crkbd/pro_micro.h @@ -21,9 +21,7 @@ $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ */ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h +#pragma once #include <avr/pgmspace.h> @@ -358,5 +356,3 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { #define SERIAL_PORT_USBVIRTUAL Serial #define SERIAL_PORT_HARDWARE Serial1 #define SERIAL_PORT_HARDWARE_OPEN Serial1 - -#endif /* Pins_Arduino_h */ diff --git a/keyboards/crkbd/readme.md b/keyboards/crkbd/readme.md index 2f9f047a4..591fdfe0d 100644 --- a/keyboards/crkbd/readme.md +++ b/keyboards/crkbd/readme.md @@ -10,8 +10,9 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys. Keyboard Maintainer: [foostan](https://github.com/foostan/) [@foostan](https://twitter.com/foostan) Hardware Supported: Crkbd PCB, Pro Micro Hardware Availability: [PCB & Case Data](https://github.com/foostan/crkbd) + Make example for this keyboard (after setting up your build environment): make crkbd:default -See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h index 6321136a7..915779060 100644 --- a/keyboards/crkbd/rev1/config.h +++ b/keyboards/crkbd/rev1/config.h @@ -16,10 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H - -#include "../config.h" +#pragma once /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED @@ -60,10 +57,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* ws2812 RGB LED */ #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER + #define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD /* * Feature disable options @@ -82,6 +77,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - - -#endif diff --git a/keyboards/crkbd/rev1/matrix.c b/keyboards/crkbd/rev1/matrix.c index 117ff8d37..718cc5744 100644 --- a/keyboards/crkbd/rev1/matrix.c +++ b/keyboards/crkbd/rev1/matrix.c @@ -20,6 +20,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <stdint.h> #include <stdbool.h> +#include <string.h> #include <avr/io.h> #include <avr/wdt.h> #include <avr/interrupt.h> @@ -30,12 +31,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "matrix.h" #include "split_util.h" #include "pro_micro.h" -#include "config.h" #ifdef USE_MATRIX_I2C # include "i2c.h" #else // USE_SERIAL -# include "serial.h" +# include "split_scomm.h" #endif #ifndef DEBOUNCE @@ -103,6 +103,8 @@ void matrix_init(void) init_cols(); TX_RX_LED_INIT; + TXLED0; + RXLED0; // initialize matrix state: all keys off for (uint8_t i=0; i < MATRIX_ROWS; i++) { @@ -179,17 +181,20 @@ i2c_error: // the cable is disconnceted, or something else went wrong #else // USE_SERIAL -int serial_transaction(void) { +int serial_transaction(int master_changed) { int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; +#ifdef SERIAL_USE_MULTI_TRANSACTION + int ret=serial_update_buffers(master_changed); +#else int ret=serial_update_buffers(); +#endif if (ret ) { - if(ret==2)RXLED1; + if(ret==2) RXLED1; return 1; } -RXLED0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } + RXLED0; + memcpy(&matrix[slaveOffset], + (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH); return 0; } #endif @@ -200,19 +205,9 @@ uint8_t matrix_scan(void) matrix_master_scan(); }else{ matrix_slave_scan(); - -// if(serial_slave_DATA_CORRUPT()){ -// TXLED0; - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[offset+i] = serial_master_buffer[i]; - } - -// }else{ -// TXLED1; -// } - + int offset = (isLeftHand) ? ROWS_PER_HAND : 0; + memcpy(&matrix[offset], + (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH); matrix_scan_quantum(); } return 1; @@ -222,6 +217,7 @@ uint8_t matrix_scan(void) uint8_t matrix_master_scan(void) { int ret = _matrix_scan(); + int mchanged = 1; int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; @@ -231,15 +227,18 @@ uint8_t matrix_master_scan(void) { // i2c_slave_buffer[i] = matrix[offset+i]; // } #else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_master_buffer[i] = matrix[offset+i]; - } + #ifdef SERIAL_USE_MULTI_TRANSACTION + mchanged = memcmp((void *)serial_master_buffer, + &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); + #endif + memcpy((void *)serial_master_buffer, + &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); #endif #ifdef USE_MATRIX_I2C if( i2c_transaction() ) { #else // USE_SERIAL - if( serial_transaction() ) { + if( serial_transaction(mchanged) ) { #endif // turn on the indicator led when halves are disconnected TXLED1; @@ -273,9 +272,19 @@ void matrix_slave_scan(void) { i2c_slave_buffer[i] = matrix[offset+i]; } #else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + int change = 0; + #endif for (int i = 0; i < ROWS_PER_HAND; ++i) { + #ifdef SERIAL_USE_MULTI_TRANSACTION + if( serial_slave_buffer[i] != matrix[offset+i] ) + change = 1; + #endif serial_slave_buffer[i] = matrix[offset+i]; } + #ifdef SERIAL_USE_MULTI_TRANSACTION + slave_buffer_change_count += change; + #endif #endif } diff --git a/keyboards/crkbd/rev1/rev1.h b/keyboards/crkbd/rev1/rev1.h index d02c51f30..cdd61d2bf 100644 --- a/keyboards/crkbd/rev1/rev1.h +++ b/keyboards/crkbd/rev1/rev1.h @@ -1,5 +1,4 @@ -#ifndef REV1_H -#define REV1_CONFIG_H +#pragma once #include "../crkbd.h" @@ -49,5 +48,3 @@ KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ KC_##L30, KC_##L31, KC_##L32, KC_##R30, KC_##R31, KC_##R32 \ ) - -#endif diff --git a/keyboards/crkbd/rev1/rules.mk b/keyboards/crkbd/rev1/rules.mk index 7af7ffdb8..6028b5a5b 100644 --- a/keyboards/crkbd/rev1/rules.mk +++ b/keyboards/crkbd/rev1/rules.mk @@ -1,2 +1,3 @@ -SRC += rev1/matrix.c \ - ws2812.c +SRC += rev1/matrix.c +SRC += rev1/split_util.c +SRC += rev1/split_scomm.c diff --git a/keyboards/crkbd/rev1/serial_config.h b/keyboards/crkbd/rev1/serial_config.h new file mode 100644 index 000000000..4fab8e8dd --- /dev/null +++ b/keyboards/crkbd/rev1/serial_config.h @@ -0,0 +1,4 @@ +#ifndef SOFT_SERIAL_PIN +#define SOFT_SERIAL_PIN D2 +#define SERIAL_USE_MULTI_TRANSACTION +#endif diff --git a/keyboards/crkbd/rev1/serial_config_simpleapi.h b/keyboards/crkbd/rev1/serial_config_simpleapi.h new file mode 100644 index 000000000..0e1dd9e4a --- /dev/null +++ b/keyboards/crkbd/rev1/serial_config_simpleapi.h @@ -0,0 +1,5 @@ +#pragma once + +#undef SERIAL_USE_MULTI_TRANSACTION +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 diff --git a/keyboards/crkbd/rev1/split_scomm.c b/keyboards/crkbd/rev1/split_scomm.c new file mode 100644 index 000000000..a1fe6ba5b --- /dev/null +++ b/keyboards/crkbd/rev1/split_scomm.c @@ -0,0 +1,91 @@ +#ifdef USE_SERIAL +#ifdef SERIAL_USE_MULTI_TRANSACTION +/* --- USE flexible API (using multi-type transaction function) --- */ + +#include <stdbool.h> +#include <stdint.h> +#include <stddef.h> +#include <split_scomm.h> +#include "serial.h" +#ifdef CONSOLE_ENABLE + #include <print.h> +#endif + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; +uint8_t volatile status_com = 0; +uint8_t volatile status1 = 0; +uint8_t slave_buffer_change_count = 0; +uint8_t s_change_old = 0xff; +uint8_t s_change_new = 0xff; + +SSTD_t transactions[] = { +#define GET_SLAVE_STATUS 0 + /* master buffer not changed, only recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + 0, NULL, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define PUT_MASTER_GET_SLAVE_STATUS 1 + /* master buffer changed need send, and recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define GET_SLAVE_BUFFER 2 + /* recive serial_slave_buffer */ + { (uint8_t *)&status1, + 0, NULL, + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + } +}; + +void serial_master_init(void) +{ + soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); +} + +void serial_slave_init(void) +{ + soft_serial_target_init(transactions, TID_LIMIT(transactions)); +} + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers(int master_update) +{ + int status, smatstatus; + static int need_retry = 0; + + if( s_change_old != s_change_new ) { + smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); + if( smatstatus == TRANSACTION_END ) { + s_change_old = s_change_new; +#ifdef CONSOLE_ENABLE + uprintf("slave matrix = %b %b %b %b\n", + serial_slave_buffer[0], serial_slave_buffer[1], + serial_slave_buffer[2], serial_slave_buffer[3]); +#endif + } + } else { + // serial_slave_buffer dosen't change + smatstatus = TRANSACTION_END; // dummy status + } + + if( !master_update && !need_retry) { + status = soft_serial_transaction(GET_SLAVE_STATUS); + } else { + status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); + } + if( status == TRANSACTION_END ) { + s_change_new = slave_buffer_change_count; + need_retry = 0; + } else { + need_retry = 1; + } + return smatstatus; +} + +#endif // SERIAL_USE_MULTI_TRANSACTION +#endif /* USE_SERIAL */ diff --git a/keyboards/crkbd/rev1/split_scomm.h b/keyboards/crkbd/rev1/split_scomm.h new file mode 100644 index 000000000..873d8939d --- /dev/null +++ b/keyboards/crkbd/rev1/split_scomm.h @@ -0,0 +1,24 @@ +#ifndef SPLIT_COMM_H +#define SPLIT_COMM_H + +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ +#include "serial.h" + +#else +/* --- USE flexible API (using multi-type transaction function) --- */ +// Buffers for master - slave communication +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 + +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; +extern uint8_t slave_buffer_change_count; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(int master_changed); + +#endif + +#endif /* SPLIT_COMM_H */ diff --git a/keyboards/crkbd/split_util.c b/keyboards/crkbd/rev1/split_util.c index 8bc064174..e1ff8b437 100644 --- a/keyboards/crkbd/split_util.c +++ b/keyboards/crkbd/rev1/split_util.c @@ -7,12 +7,11 @@ #include "split_util.h" #include "matrix.h" #include "keyboard.h" -#include "config.h" #ifdef USE_MATRIX_I2C # include "i2c.h" #else -# include "serial.h" +# include "split_scomm.h" #endif volatile bool isLeftHand = true; diff --git a/keyboards/crkbd/split_util.h b/keyboards/crkbd/rev1/split_util.h index 687ca19bd..687ca19bd 100644 --- a/keyboards/crkbd/split_util.h +++ b/keyboards/crkbd/rev1/split_util.h diff --git a/keyboards/crkbd/rules.mk b/keyboards/crkbd/rules.mk index d88daebf3..426ed0c03 100644 --- a/keyboards/crkbd/rules.mk +++ b/keyboards/crkbd/rules.mk @@ -1,7 +1,9 @@ -SRC += i2c.c \ - serial.c \ - split_util.c \ - ssd1306.c +SRC += i2c.c +SRC += serial.c +SRC += ssd1306.c + +# if firmware size over limit, try this option +# CFLAGS += -flto # MCU name #MCU = at90usb1287 @@ -63,7 +65,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SUBPROJECT_rev1 = no USE_I2C = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/crkbd/serial.c b/keyboards/crkbd/serial.c index e918ab6ee..325c29a3f 100644 --- a/keyboards/crkbd/serial.c +++ b/keyboards/crkbd/serial.c @@ -1,5 +1,10 @@ /* * WARNING: be careful changing this code, it is very timing dependent + * + * 2018-10-28 checked + * avr-gcc 4.9.2 + * avr-gcc 5.4.0 + * avr-gcc 7.3.0 */ #ifndef F_CPU @@ -9,230 +14,577 @@ #include <avr/io.h> #include <avr/interrupt.h> #include <util/delay.h> +#include <stddef.h> #include <stdbool.h> #include "serial.h" +//#include <pro_micro.h> + +#ifdef SOFT_SERIAL_PIN + +#ifdef __AVR_ATmega32U4__ + // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. + #ifdef USE_I2C + #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 + #error Using ATmega32U4 I2C, so can not use PD0, PD1 + #endif + #endif + + #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 + #define SERIAL_PIN_DDR DDRD + #define SERIAL_PIN_PORT PORTD + #define SERIAL_PIN_INPUT PIND + #if SOFT_SERIAL_PIN == D0 + #define SERIAL_PIN_MASK _BV(PD0) + #define EIMSK_BIT _BV(INT0) + #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) + #define SERIAL_PIN_INTERRUPT INT0_vect + #elif SOFT_SERIAL_PIN == D1 + #define SERIAL_PIN_MASK _BV(PD1) + #define EIMSK_BIT _BV(INT1) + #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) + #define SERIAL_PIN_INTERRUPT INT1_vect + #elif SOFT_SERIAL_PIN == D2 + #define SERIAL_PIN_MASK _BV(PD2) + #define EIMSK_BIT _BV(INT2) + #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) + #define SERIAL_PIN_INTERRUPT INT2_vect + #elif SOFT_SERIAL_PIN == D3 + #define SERIAL_PIN_MASK _BV(PD3) + #define EIMSK_BIT _BV(INT3) + #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) + #define SERIAL_PIN_INTERRUPT INT3_vect + #endif + #elif SOFT_SERIAL_PIN == E6 + #define SERIAL_PIN_DDR DDRE + #define SERIAL_PIN_PORT PORTE + #define SERIAL_PIN_INPUT PINE + #define SERIAL_PIN_MASK _BV(PE6) + #define EIMSK_BIT _BV(INT6) + #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) + #define SERIAL_PIN_INTERRUPT INT6_vect + #else + #error invalid SOFT_SERIAL_PIN value + #endif -#ifdef USE_SERIAL +#else + #error serial.c now support ATmega32U4 only +#endif + +//////////////// for backward compatibility //////////////////////////////// +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; + #endif + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + #endif + uint8_t volatile status0 = 0; + +SSTD_t transactions[] = { + { (uint8_t *)&status0, + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + #else + 0, (uint8_t *)NULL, + #endif + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + #else + 0, (uint8_t *)NULL, + #endif + } +}; -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 +void serial_master_init(void) +{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; +void serial_slave_init(void) +{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers() +{ + int result; + result = soft_serial_transaction(); + return result; +} + +#endif // end of Simple API (OLD API, compatible with let's split serial.c) +//////////////////////////////////////////////////////////////////////////// + +#define ALWAYS_INLINE __attribute__((always_inline)) +#define NO_INLINE __attribute__((noinline)) +#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) + +// parity check +#define ODD_PARITY 1 +#define EVEN_PARITY 0 +#define PARITY EVEN_PARITY + +#ifdef SERIAL_DELAY + // custom setup in config.h + // #define TID_SEND_ADJUST 2 + // #define SERIAL_DELAY 6 // micro sec + // #define READ_WRITE_START_ADJUST 30 // cycles + // #define READ_WRITE_WIDTH_ADJUST 8 // cycles +#else +// ============ Standard setups ============ + +#ifndef SELECT_SOFT_SERIAL_SPEED +#define SELECT_SOFT_SERIAL_SPEED 1 +// 0: about 189kbps +// 1: about 137kbps (default) +// 2: about 75kbps +// 3: about 39kbps +// 4: about 26kbps +// 5: about 20kbps +#endif +#if __GNUC__ < 6 + #define TID_SEND_ADJUST 14 +#else + #define TID_SEND_ADJUST 2 +#endif + +#if SELECT_SOFT_SERIAL_SPEED == 0 + // Very High speed + #define SERIAL_DELAY 4 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 34 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 1 + // High speed + #define SERIAL_DELAY 6 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 30 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 2 + // Middle speed + #define SERIAL_DELAY 12 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 3 + // Low speed + #define SERIAL_DELAY 24 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 4 + // Very Low speed + #define SERIAL_DELAY 36 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 5 + // Ultra Low speed + #define SERIAL_DELAY 48 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#else +#error invalid SELECT_SOFT_SERIAL_SPEED value +#endif /* SELECT_SOFT_SERIAL_SPEED */ +#endif /* SERIAL_DELAY */ + +#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) +#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) + +#define SLAVE_INT_WIDTH_US 1 +#ifndef SERIAL_USE_MULTI_TRANSACTION + #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY +#else + #define SLAVE_INT_ACK_WIDTH_UNIT 2 + #define SLAVE_INT_ACK_WIDTH 4 +#endif + +static SSTD_t *Transaction_table = NULL; +static uint8_t Transaction_table_size = 0; + +inline static void serial_delay(void) ALWAYS_INLINE; inline static void serial_delay(void) { _delay_us(SERIAL_DELAY); } -void serial_delay_short(void) { - _delay_us(SERIAL_DELAY-1); + +inline static void serial_delay_half1(void) ALWAYS_INLINE; +inline static +void serial_delay_half1(void) { + _delay_us(SERIAL_DELAY_HALF1); } + +inline static void serial_delay_half2(void) ALWAYS_INLINE; +inline static +void serial_delay_half2(void) { + _delay_us(SERIAL_DELAY_HALF2); +} + +inline static void serial_output(void) ALWAYS_INLINE; inline static void serial_output(void) { SERIAL_PIN_DDR |= SERIAL_PIN_MASK; } // make the serial pin an input with pull-up resistor +inline static void serial_input_with_pullup(void) ALWAYS_INLINE; inline static -void serial_input(void) { +void serial_input_with_pullup(void) { SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; SERIAL_PIN_PORT |= SERIAL_PIN_MASK; } +inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; inline static uint8_t serial_read_pin(void) { return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); } +inline static void serial_low(void) ALWAYS_INLINE; inline static void serial_low(void) { SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; } +inline static void serial_high(void) ALWAYS_INLINE; inline static void serial_high(void) { SERIAL_PIN_PORT |= SERIAL_PIN_MASK; } -void serial_master_init(void) { - serial_output(); - serial_high(); +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_output(); + serial_high(); } -void serial_slave_init(void) { - serial_input(); - -#ifndef USE_SERIAL_PD2 - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_input_with_pullup(); + + // Enable INT0-INT3,INT6 + EIMSK |= EIMSK_BIT; +#if SERIAL_PIN_MASK == _BV(PE6) + // Trigger on falling edge of INT6 + EICRB &= EICRx_BIT; #else - // Enable INT2 - EIMSK |= _BV(INT2); - // Trigger on falling edge of INT2 - EICRA &= ~(_BV(ISC20) | _BV(ISC21)); + // Trigger on falling edge of INT0-INT3 + EICRA &= EICRx_BIT; #endif } -// Used by the master to synchronize timing with the slave. +// Used by the sender to synchronize timing with the reciver. +static void sync_recv(void) NO_INLINE; static void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. + for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { + } + // This shouldn't hang if the target disconnects because the + // serial line will float to high if the target does disconnect. while (!serial_read_pin()); - //serial_delay(); - _delay_us(SERIAL_DELAY-5); } -// Used by the slave to send a synchronization signal to the master. +// Used by the reciver to send a synchronization signal to the sender. +static void sync_send(void) NO_INLINE; static void sync_send(void) { - serial_output(); - serial_low(); serial_delay(); - serial_high(); } // Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { + uint8_t byte, i, p, pb; + + _delay_sub_us(READ_WRITE_START_ADJUST); + for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { + serial_delay_half1(); // read the middle of pulses + if( serial_read_pin() ) { + byte = (byte << 1) | 1; p ^= 1; + } else { + byte = (byte << 1) | 0; p ^= 0; + } + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); } + /* recive parity bit */ + serial_delay_half1(); // read the middle of pulses + pb = serial_read_pin(); + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + + *pterrcount += (p != pb)? 1 : 0; return byte; } // Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while( b-- ) { - if(data & (1 << b)) { - serial_high(); - } else { - serial_low(); +void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; +void serial_write_chunk(uint8_t data, uint8_t bit) { + uint8_t b, p; + for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { + if(data & b) { + serial_high(); p ^= 1; + } else { + serial_low(); p ^= 0; + } + serial_delay(); } + /* send parity bit */ + if(p & 1) { serial_high(); } + else { serial_low(); } serial_delay(); - } -} -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); + serial_low(); // sync_send() / senc_recv() need raise edge +} - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); +static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +void serial_send_packet(uint8_t *buffer, uint8_t size) { + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + data = buffer[i]; sync_send(); - checksum += serial_slave_buffer[i]; + serial_write_chunk(data,8); } - serial_write_byte(checksum); - sync_send(); +} - // wait for the sync to finish sending - serial_delay(); +static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { + uint8_t pecount = 0; + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + sync_recv(); + data = serial_read_chunk(&pecount, 8); + buffer[i] = data; + } + return pecount == 0; +} + +inline static +void change_sender2reciver(void) { + sync_send(); //0 + serial_delay_half1(); //1 + serial_low(); //2 + serial_input_with_pullup(); //2 + serial_delay_half1(); //3 +} - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); +inline static +void change_reciver2sender(void) { + sync_recv(); //0 + serial_delay(); //1 + serial_low(); //3 + serial_output(); //3 + serial_delay_half1(); //4 +} - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += serial_master_buffer[i]; +static inline uint8_t nibble_bits_count(uint8_t bits) +{ + bits = (bits & 0x5) + (bits >> 1 & 0x5); + bits = (bits & 0x3) + (bits >> 2 & 0x3); + return bits; +} + +// interrupt handle to be used by the target device +ISR(SERIAL_PIN_INTERRUPT) { + +#ifndef SERIAL_USE_MULTI_TRANSACTION + serial_low(); + serial_output(); + SSTD_t *trans = Transaction_table; +#else + // recive transaction table index + uint8_t tid, bits; + uint8_t pecount = 0; + sync_recv(); + bits = serial_read_chunk(&pecount,7); + tid = bits>>3; + bits = (bits&7) != nibble_bits_count(tid); + if( bits || pecount> 0 || tid > Transaction_table_size ) { + return; } - uint8_t checksum_received = serial_read_byte(); - sync_send(); + serial_delay_half1(); - serial_input(); // end transaction + serial_high(); // response step1 low->high + serial_output(); + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); + SSTD_t *trans = &Transaction_table[tid]; + serial_low(); // response step2 ack high->low +#endif - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; + // target send phase + if( trans->target2initiator_buffer_size > 0 ) + serial_send_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size); + // target switch to input + change_sender2reciver(); + + // target recive phase + if( trans->initiator2target_buffer_size > 0 ) { + if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size) ) { + *trans->status = TRANSACTION_ACCEPTED; + } else { + *trans->status = TRANSACTION_DATA_ERROR; + } } else { - status &= ~SLAVE_DATA_CORRUPT; + *trans->status = TRANSACTION_ACCEPTED; } -} -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; + sync_recv(); //weit initiator output to high } -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. +///////// +// start transaction by initiator +// +// int soft_serial_transaction(int sstd_index) // // Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts +// TRANSACTION_END +// TRANSACTION_NO_RESPONSE +// TRANSACTION_DATA_ERROR +// this code is very time dependent, so we need to disable interrupts +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void) { + SSTD_t *trans = Transaction_table; +#else +int soft_serial_transaction(int sstd_index) { + if( sstd_index > Transaction_table_size ) + return TRANSACTION_TYPE_ERROR; + SSTD_t *trans = &Transaction_table[sstd_index]; +#endif cli(); - // signal to the slave that we want to start a transaction + // signal to the target that we want to start a transaction serial_output(); serial_low(); - _delay_us(1); + _delay_us(SLAVE_INT_WIDTH_US); - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); +#ifndef SERIAL_USE_MULTI_TRANSACTION + // wait for the target response + serial_input_with_pullup(); + _delay_us(SLAVE_INT_RESPONSE_TIME); - // check if the slave is present + // check if the target is present if (serial_read_pin()) { - // slave failed to pull the line low, assume not present + // target failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; sei(); - return 1; + return TRANSACTION_NO_RESPONSE; } - // if the slave is present syncronize with it - sync_recv(); - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += serial_slave_buffer[i]; +#else + // send transaction table index + int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); + sync_send(); + _delay_sub_us(TID_SEND_ADJUST); + serial_write_chunk(tid, 7); + serial_delay_half1(); + + // wait for the target response (step1 low->high) + serial_input_with_pullup(); + while( !serial_read_pin() ) { + _delay_sub_us(2); } - uint8_t checksum_received = serial_read_byte(); - sync_recv(); - if (checksum_computed != checksum_received) { - sei(); - return 2; + // check if the target is present (step2 high->low) + for( int i = 0; serial_read_pin(); i++ ) { + if (i > SLAVE_INT_ACK_WIDTH + 1) { + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); } +#endif - uint8_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += serial_master_buffer[i]; + // initiator recive phase + // if the target is present syncronize with it + if( trans->target2initiator_buffer_size > 0 ) { + if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size) ) { + serial_output(); + serial_high(); + *trans->status = TRANSACTION_DATA_ERROR; + sei(); + return TRANSACTION_DATA_ERROR; + } + } + + // initiator switch to output + change_reciver2sender(); + + // initiator send phase + if( trans->initiator2target_buffer_size > 0 ) { + serial_send_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size); } - serial_write_byte(checksum); - sync_recv(); // always, release the line when not in use - serial_output(); - serial_high(); + sync_send(); + *trans->status = TRANSACTION_END; sei(); - return 0; + return TRANSACTION_END; +} + +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index) { + SSTD_t *trans = &Transaction_table[sstd_index]; + cli(); + int retval = *trans->status; + *trans->status = 0;; + sei(); + return retval; } +#endif #endif + +// Helix serial.c history +// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) +// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) +// (adjusted with avr-gcc 4.9.2) +// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) +// (adjusted with avr-gcc 4.9.2) +// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) +// (adjusted with avr-gcc 4.9.2) +// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) +// (adjusted with avr-gcc 7.3.0) +// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) +// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/crkbd/serial.h b/keyboards/crkbd/serial.h index 43e51f7fa..7e0c0847a 100644 --- a/keyboards/crkbd/serial.h +++ b/keyboards/crkbd/serial.h @@ -1,32 +1,84 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H +#ifndef SOFT_SERIAL_H +#define SOFT_SERIAL_H -#include "config.h" #include <stdbool.h> -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND +// ///////////////////////////////////////////////////////////////// +// Need Soft Serial defines in config.h +// ///////////////////////////////////////////////////////////////// +// ex. +// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 +// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 +// // 1: about 137kbps (default) +// // 2: about 75kbps +// // 3: about 39kbps +// // 4: about 26kbps +// // 5: about 20kbps +// +// //// USE Simple API (OLD API, compatible with let's split serial.c) +// ex. +// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +// #define SERIAL_MASTER_BUFFER_LENGTH 1 +// +// //// USE flexible API (using multi-type transaction function) +// #define SERIAL_USE_MULTI_TRANSACTION +// +// ///////////////////////////////////////////////////////////////// -#ifndef USE_SERIAL_PD2 -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect -#else -#define SERIAL_PIN_MASK _BV(PD2) -#define SERIAL_PIN_INTERRUPT INT2_vect -#endif - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 -// Buffers for master - slave communication +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ +#if SERIAL_SLAVE_BUFFER_LENGTH > 0 extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +#endif +#if SERIAL_MASTER_BUFFER_LENGTH > 0 extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; +#endif void serial_master_init(void); void serial_slave_init(void); int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); +#endif // USE Simple API + +// Soft Serial Transaction Descriptor +typedef struct _SSTD_t { + uint8_t *status; + uint8_t initiator2target_buffer_size; + uint8_t *initiator2target_buffer; + uint8_t target2initiator_buffer_size; + uint8_t *target2initiator_buffer; +} SSTD_t; +#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) + +// initiator is transaction start side +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); +// target is interrupt accept side +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); + +// initiator resullt +#define TRANSACTION_END 0 +#define TRANSACTION_NO_RESPONSE 0x1 +#define TRANSACTION_DATA_ERROR 0x2 +#define TRANSACTION_TYPE_ERROR 0x4 +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void); +#else +int soft_serial_transaction(int sstd_index); #endif + +// target status +// *SSTD_t.status has +// initiator: +// TRANSACTION_END +// or TRANSACTION_NO_RESPONSE +// or TRANSACTION_DATA_ERROR +// target: +// TRANSACTION_DATA_ERROR +// or TRANSACTION_ACCEPTED +#define TRANSACTION_ACCEPTED 0x8 +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index); +#endif + +#endif /* SOFT_SERIAL_H */ diff --git a/keyboards/crkbd/ssd1306.c b/keyboards/crkbd/ssd1306.c index d07900119..4330c8497 100644 --- a/keyboards/crkbd/ssd1306.c +++ b/keyboards/crkbd/ssd1306.c @@ -4,7 +4,6 @@ #include "i2c.h" #include <string.h> #include "print.h" -#include "glcdfont.c" #ifdef ADAFRUIT_BLE_ENABLE #include "adafruit_ble.h" #endif @@ -14,6 +13,8 @@ #include "sendchar.h" #include "timer.h" +static const unsigned char font[] PROGMEM; + // Set this to 1 to help diagnose early startup problems // when testing power-on with ble. Turn it off otherwise, // as the latency of printing most of the debug info messes @@ -23,12 +24,17 @@ //static uint16_t last_battery_update; //static uint32_t vbat; //#define BatteryUpdateInterval 10000 /* milliseconds */ -#define ScreenOffInterval 300000 /* milliseconds */ + +// 'last_flush' is declared as uint16_t, +// so this must be less than 65535 +#define ScreenOffInterval 60000 /* milliseconds */ #if DEBUG_TO_SCREEN static uint8_t displaying; #endif static uint16_t last_flush; +static bool force_dirty = true; + // Write command sequence. // Returns true on success. static inline bool _send_cmd1(uint8_t cmd) { @@ -123,6 +129,7 @@ static int8_t capture_sendchar(uint8_t c) { bool iota_gfx_init(bool rotate) { bool success = false; + i2c_master_init(); send_cmd1(DisplayOff); send_cmd2(SetDisplayClockDiv, 0x80); send_cmd2(SetMultiPlex, DisplayHeight - 1); @@ -319,12 +326,19 @@ void iota_gfx_task_user(void) { void iota_gfx_task(void) { iota_gfx_task_user(); - if (display.dirty) { + if (display.dirty|| force_dirty) { iota_gfx_flush(); + force_dirty = false; } if (timer_elapsed(last_flush) > ScreenOffInterval) { iota_gfx_off(); } } + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { + force_dirty = true; + return true; +} + #endif diff --git a/keyboards/crkbd/ssd1306.h b/keyboards/crkbd/ssd1306.h index 59d31c9f3..ea8c92328 100644 --- a/keyboards/crkbd/ssd1306.h +++ b/keyboards/crkbd/ssd1306.h @@ -1,10 +1,9 @@ -#ifndef SSD1306_H -#define SSD1306_H +#pragma once #include <stdbool.h> #include <stdio.h> #include "pincontrol.h" -#include "config.h" +#include "action.h" enum ssd1306_cmds { DisplayOff = 0xAE, @@ -89,6 +88,4 @@ void matrix_write_ln(struct CharacterMatrix *matrix, const char *data); void matrix_write_P(struct CharacterMatrix *matrix, const char *data); void matrix_render(struct CharacterMatrix *matrix); - - -#endif +bool process_record_gfx(uint16_t keycode, keyrecord_t *record);
\ No newline at end of file |