diff options
Diffstat (limited to 'keyboards/eco')
25 files changed, 730 insertions, 0 deletions
diff --git a/keyboards/eco/Makefile b/keyboards/eco/Makefile new file mode 100644 index 000000000..b9bada8f8 --- /dev/null +++ b/keyboards/eco/Makefile @@ -0,0 +1,5 @@ +SUBPROJECT_DEFAULT = rev2 + +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h new file mode 100644 index 000000000..99b057496 --- /dev/null +++ b/keyboards/eco/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x1337 +#define PRODUCT_ID 0x6006 +#define MANUFACTURER Bishop Keyboards +#define PRODUCT The ECO Keyboard +#define DESCRIPTION An economical ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 14 + +#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#ifdef SUBPROJECT_rev1 + #include "rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2/config.h" +#endif + +#endif diff --git a/keyboards/eco/eco.c b/keyboards/eco/eco.c new file mode 100644 index 000000000..84097652d --- /dev/null +++ b/keyboards/eco/eco.c @@ -0,0 +1 @@ +#include "eco.h" diff --git a/keyboards/eco/eco.h b/keyboards/eco/eco.h new file mode 100644 index 000000000..2cfb8df26 --- /dev/null +++ b/keyboards/eco/eco.h @@ -0,0 +1,14 @@ +#ifndef ECO_H +#define ECO_H + +#ifdef SUBPROJECT_rev1 + #include "rev1.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2.h" +#endif + + +#include "quantum.h" + +#endif
\ No newline at end of file diff --git a/keyboards/eco/keymaps/default/Makefile b/keyboards/eco/keymaps/default/Makefile new file mode 100644 index 000000000..7dab97942 --- /dev/null +++ b/keyboards/eco/keymaps/default/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/eco/keymaps/default/keymap.c b/keyboards/eco/keymaps/default/keymap.c new file mode 100644 index 000000000..fc8339caa --- /dev/null +++ b/keyboards/eco/keymaps/default/keymap.c @@ -0,0 +1,107 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +// Default ECO Layout +// KLE here : http://www.keyboard-layout-editor.com/#/gists/0733eca6b4cb88ff9d7de746803f4039 + +#include "eco.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _FN1 2 +#define _FN2 3 + +enum eco_keycodes { + QWERTY = SAFE_RANGE +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-------------------------------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | Enter| \ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / | Shift| Up | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt | Del | FN1 | FN1 | Space| Space| FN2 | FN2 | Ctrl | Left | Down | Right| + * `-------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LGUI,KC_LALT, KC_DEL, MO(_FN1), MO(_FN1), KC_SPC, KC_SPC, MO(_FN2), MO(_FN2), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT +), + +/* FN1 + * ,-------------------------------------------------------------------------------------------------. + * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | _ | + | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |caltde| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | RESET| + * `-------------------------------------------------------------------------------------------------' + */ +[_FN1] = KEYMAP( + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS, KC_PLUS, _______, + CALTDEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET +), + +/* Raise + * ,-------------------------------------------------------------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Taskmg| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ +[_FN2] = KEYMAP( + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, + TSKMGR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + } + return true; +} + diff --git a/keyboards/eco/keymaps/default/readme.md b/keyboards/eco/keymaps/default/readme.md new file mode 100644 index 000000000..cf168377d --- /dev/null +++ b/keyboards/eco/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# ECO Default Layout by u/That-Canadian + +KLE here : http://www.keyboard-layout-editor.com/#/gists/0733eca6b4cb88ff9d7de746803f4039
\ No newline at end of file diff --git a/keyboards/eco/keymaps/default/rules.mk b/keyboards/eco/keymaps/default/rules.mk new file mode 100644 index 000000000..7dab97942 --- /dev/null +++ b/keyboards/eco/keymaps/default/rules.mk @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/eco/keymaps/that_canadian/Makefile b/keyboards/eco/keymaps/that_canadian/Makefile new file mode 100644 index 000000000..7dab97942 --- /dev/null +++ b/keyboards/eco/keymaps/that_canadian/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/eco/keymaps/that_canadian/keymap.c b/keyboards/eco/keymaps/that_canadian/keymap.c new file mode 100644 index 000000000..5e3d9bdf5 --- /dev/null +++ b/keyboards/eco/keymaps/that_canadian/keymap.c @@ -0,0 +1,217 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +// Below layout is based upon /u/That-Canadian's planck layout + +#include "eco.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 2 +#define _RAISE 3 + +#define _FUNCTION 15 +#define _ADJUST 16 + +enum eco_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-------------------------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | ( | ) | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Func | A | S | D | F | G | [ | ] | H | J | K | L | ; | Enter| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | { | } | N | M | , | . | / | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | ` | GUI | Alt |Lower | Space|Pg-dwn| Pg-up| Space|Raise | Left | Down | Up |Right | + * `-------------------------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LPRN, KC_RPRN, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {MO(_FUNCTION), KC_A, KC_S, KC_D, KC_F, KC_G, KC_LBRC, KC_RBRC, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, + {OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT}, + {KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_PGDN, KC_PGUP, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-------------------------------------------------------------------------------------------------. + * | Esc | ! | @ | # | $ | % | | | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F1 | F2 | F3 | F4 | F5 | | | F6 | _ | + | { | } |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | | | F12 | | | Mute | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | |Lower | | | | Bksp |Raise | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, KC_F12, _______, _______, KC_MUTE, _______, KC_PIPE}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-------------------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | 4 | 5 | 6 | + | | | | | - | = | [ | ] |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * |Enter | 7 | 8 | 9 | - | | | | | | | Mute | | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | , | 0 | . |Lower | Bksp | | | |Raise | Next | Vol- | Vol+ | Play | + * `-------------------------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {_______, KC_4, KC_5, KC_6, KC_PLUS, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______}, + {KC_ENT, KC_7, KC_8, KC_9, KC_MINS, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_BSLS}, + {_______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Adjust (Lower + Raise) + * ,-------------------------------------------------------------------------------------------------. + * |Taskmg| Reset| | | | | | | | | | | |caltde| + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {TSKMGR, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CALTDEL}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +}, + +/* Function + * ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | Up | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | Left | Down |Right | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | Caps | | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | | | + * `-------------------------------------------------------------------------------------------------' + */ +[_FUNCTION] = { + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, + {KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_SONG(tone_startup); +} + +void shutdown_user() +{ + PLAY_SONG(tone_goodbye); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_SONG(music_scale); +} + +#endif diff --git a/keyboards/eco/keymaps/that_canadian/readme.md b/keyboards/eco/keymaps/that_canadian/readme.md new file mode 100644 index 000000000..aa3316af0 --- /dev/null +++ b/keyboards/eco/keymaps/that_canadian/readme.md @@ -0,0 +1 @@ +# ECO Layout by u/That-Canadian
\ No newline at end of file diff --git a/keyboards/eco/keymaps/that_canadian/rules.mk b/keyboards/eco/keymaps/that_canadian/rules.mk new file mode 100644 index 000000000..7dab97942 --- /dev/null +++ b/keyboards/eco/keymaps/that_canadian/rules.mk @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/eco/readme.md b/keyboards/eco/readme.md new file mode 100644 index 000000000..d29aa8ece --- /dev/null +++ b/keyboards/eco/readme.md @@ -0,0 +1,15 @@ +ECO +=== + + + +An economical 4x14 ortholinear keyboard + +Keyboard Maintainer: BishopKeyboards and That-Canadian +Hardware Supported: ECO PCB rev1 Pro Micro + +Make example for this keyboard (after setting up your build environment): + + make eco-rev2-that_canadian + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/eco/rev1/Makefile b/keyboards/eco/rev1/Makefile new file mode 100644 index 000000000..4e2a6f00f --- /dev/null +++ b/keyboards/eco/rev1/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/eco/rev1/config.h b/keyboards/eco/rev1/config.h new file mode 100644 index 000000000..1e97a703d --- /dev/null +++ b/keyboards/eco/rev1/config.h @@ -0,0 +1,30 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +#include "../config.h" + +#define DEVICE_VER 0x0001 + +/* ECO V1 pin-out */ +#define MATRIX_ROW_PINS { B1, B6, B2, B3 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 } +#define UNUSED_PINS + +#endif diff --git a/keyboards/eco/rev1/rev1.c b/keyboards/eco/rev1/rev1.c new file mode 100644 index 000000000..84097652d --- /dev/null +++ b/keyboards/eco/rev1/rev1.c @@ -0,0 +1 @@ +#include "eco.h" diff --git a/keyboards/eco/rev1/rev1.h b/keyboards/eco/rev1/rev1.h new file mode 100644 index 000000000..41541ac05 --- /dev/null +++ b/keyboards/eco/rev1/rev1.h @@ -0,0 +1,24 @@ +#ifndef REV1_H +#define REV1_H + +#include "../eco.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 \ + ) \ + { \ + { k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014 }, \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114 }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214 }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 } \ + } + +#endif
\ No newline at end of file diff --git a/keyboards/eco/rev1/rules.mk b/keyboards/eco/rev1/rules.mk new file mode 100644 index 000000000..f84561674 --- /dev/null +++ b/keyboards/eco/rev1/rules.mk @@ -0,0 +1 @@ +BACKLIGHT_ENABLE = no
\ No newline at end of file diff --git a/keyboards/eco/rev2/Makefile b/keyboards/eco/rev2/Makefile new file mode 100644 index 000000000..4e2a6f00f --- /dev/null +++ b/keyboards/eco/rev2/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/eco/rev2/config.h b/keyboards/eco/rev2/config.h new file mode 100644 index 000000000..83f2defc9 --- /dev/null +++ b/keyboards/eco/rev2/config.h @@ -0,0 +1,30 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef REV2_CONFIG_H +#define REV2_CONFIG_H + +#include "../config.h" + +#define DEVICE_VER 0x0002 + +/* ECO V2.1 pin-out */ +#define MATRIX_ROW_PINS { D7, B5, B4, E6 } +#define MATRIX_COL_PINS { D1, D0, D4, C6, B6, B2, B3, B1, F7, F6, F5, F4, D2, D3 } +#define UNUSED_PINS + +#endif diff --git a/keyboards/eco/rev2/rev2.c b/keyboards/eco/rev2/rev2.c new file mode 100644 index 000000000..84097652d --- /dev/null +++ b/keyboards/eco/rev2/rev2.c @@ -0,0 +1 @@ +#include "eco.h" diff --git a/keyboards/eco/rev2/rev2.h b/keyboards/eco/rev2/rev2.h new file mode 100644 index 000000000..5b377f290 --- /dev/null +++ b/keyboards/eco/rev2/rev2.h @@ -0,0 +1,24 @@ +#ifndef REV2_H +#define REV2_H + +#include "../eco.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 \ + ) \ + { \ + { k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014 }, \ + { k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114 }, \ + { k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214 }, \ + { k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 } \ + } + +#endif
\ No newline at end of file diff --git a/keyboards/eco/rev2/rules.mk b/keyboards/eco/rev2/rules.mk new file mode 100644 index 000000000..f84561674 --- /dev/null +++ b/keyboards/eco/rev2/rules.mk @@ -0,0 +1 @@ +BACKLIGHT_ENABLE = no
\ No newline at end of file diff --git a/keyboards/eco/rules.mk b/keyboards/eco/rules.mk new file mode 100644 index 000000000..cf26cdc0d --- /dev/null +++ b/keyboards/eco/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = yes # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +API_SYSEX_ENABLE = no + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/eco/subproject.mk b/keyboards/eco/subproject.mk new file mode 100644 index 000000000..7c9b39598 --- /dev/null +++ b/keyboards/eco/subproject.mk @@ -0,0 +1 @@ +SUBPROJECT_DEFAULT = rev2 |