diff options
Diffstat (limited to 'keyboards/handwired')
| -rw-r--r-- | keyboards/handwired/atreus50/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/atreus50.c | 1 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/atreus50.h | 18 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/config.h | 58 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/keymaps/default/Makefile | 21 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/keymaps/default/keymap.c | 128 | ||||
| -rw-r--r-- | keyboards/handwired/atreus50/rules.mk | 56 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/config.h | 162 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/keymaps/default/Makefile | 21 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/keymaps/default/config.h | 8 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/keymaps/default/keymap.c | 90 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/keymaps/default/readme.md | 1 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/readme.md | 28 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/rules.mk | 67 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/xk66.c | 8 | ||||
| -rw-r--r-- | keyboards/handwired/xk66/xk66.h | 25 |
17 files changed, 698 insertions, 0 deletions
diff --git a/keyboards/handwired/atreus50/Makefile b/keyboards/handwired/atreus50/Makefile new file mode 100644 index 000000000..bd09e5885 --- /dev/null +++ b/keyboards/handwired/atreus50/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif diff --git a/keyboards/handwired/atreus50/atreus50.c b/keyboards/handwired/atreus50/atreus50.c new file mode 100644 index 000000000..dd0dbdaac --- /dev/null +++ b/keyboards/handwired/atreus50/atreus50.c @@ -0,0 +1 @@ +#include "atreus50.h" diff --git a/keyboards/handwired/atreus50/atreus50.h b/keyboards/handwired/atreus50/atreus50.h new file mode 100644 index 000000000..5d27109cc --- /dev/null +++ b/keyboards/handwired/atreus50/atreus50.h @@ -0,0 +1,18 @@ +#ifndef ATREUS50_H +#define ATREUS50_H + +#include "quantum.h" + +#define KEYMAP( \ + K000, K001, K002, K003, K004, K005, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K107, K108, K109, K110, K111, K112, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312 \ +) { \ + { K000, K001, K002, K003, K004, K005, KC_NO, K007, K008, K009, K010, K011, K012 }, \ + { K100, K101, K102, K103, K104, K105, KC_NO, K107, K108, K109, K110, K111, K112 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312 } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h new file mode 100644 index 000000000..0248032a0 --- /dev/null +++ b/keyboards/handwired/atreus50/config.h @@ -0,0 +1,58 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER qmkbuilder +#define PRODUCT Atreus50 +#define DESCRIPTION Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F4, F5, F6, F7 } +#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B2, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/atreus50/keymaps/default/Makefile b/keyboards/handwired/atreus50/keymaps/default/Makefile new file mode 100644 index 000000000..43fee2668 --- /dev/null +++ b/keyboards/handwired/atreus50/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/atreus50/keymaps/default/keymap.c b/keyboards/handwired/atreus50/keymaps/default/keymap.c new file mode 100644 index 000000000..b3dc17cb1 --- /dev/null +++ b/keyboards/handwired/atreus50/keymaps/default/keymap.c @@ -0,0 +1,128 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "atreus50.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DVORAK 0 +#define _QWERTY 1 +#define _COLEMAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum planck_keycodes { + DVORAK = SAFE_RANGE, + QWERTY, + COLEMAK, + LOWER, + RAISE, + BACKLIT +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DVORAK] = { /* dvorak */ + { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, _______, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH }, + { KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, _______, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS }, + { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_ENT, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT }, + { KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_LGUI, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL } + }, + + [_QWERTY] = { /* qwerty */ + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, _______, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL }, + { KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, _______, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + { KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_LGUI, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL } + }, + + [_COLEMAK] = { /* colemak */ + { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, _______, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL }, + { KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, _______, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + { KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_LGUI, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL} + }, + + [_LOWER] = { + { KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______ }, + { KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE }, + { _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______ }, + { _______, _______, KC_HOME, KC_END, _______, KC_DEL, _______, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______ } + }, + [_RAISE] = { + { KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, _______ }, + { KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS }, + { _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______ }, + { _______, _______, KC_HOME, KC_END, _______, KC_DEL, _______, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______ } + }, + [_ADJUST] = { + { KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12 }, + { _______, RESET, _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ } + }, + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + } + return true; +};
\ No newline at end of file diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk new file mode 100644 index 000000000..1f8e943be --- /dev/null +++ b/keyboards/handwired/atreus50/rules.mk @@ -0,0 +1,56 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +AUDIO_ENABLE ?= no +RGBLIGHT_ENABLE ?= no
\ No newline at end of file diff --git a/keyboards/handwired/xk66/Makefile b/keyboards/handwired/xk66/Makefile new file mode 100644 index 000000000..bd09e5885 --- /dev/null +++ b/keyboards/handwired/xk66/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif diff --git a/keyboards/handwired/xk66/config.h b/keyboards/handwired/xk66/config.h new file mode 100644 index 000000000..02ff2a6bf --- /dev/null +++ b/keyboards/handwired/xk66/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Xyverz +#define PRODUCT XK-66 +#define DESCRIPTION A hand-wired 66-key keyboard by Xyverz + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 } +#define MATRIX_COL_PINS { B6, F7, F6, F5, F4, F1, F0, D1, D0, B7, B3, B2, B1, B0 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/xk66/keymaps/default/Makefile b/keyboards/handwired/xk66/keymaps/default/Makefile new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/handwired/xk66/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/xk66/keymaps/default/config.h b/keyboards/handwired/xk66/keymaps/default/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/handwired/xk66/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/xk66/keymaps/default/keymap.c b/keyboards/handwired/xk66/keymaps/default/keymap.c new file mode 100644 index 000000000..61b3bd97f --- /dev/null +++ b/keyboards/handwired/xk66/keymaps/default/keymap.c @@ -0,0 +1,90 @@ +#include "xk66.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DV 0 +#define _QW 1 +#define _CM 2 +#define _FL 3 + +// Macro name shortcuts +#define QWERTY M(_QW) +#define DVORAK M(_DV) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_DV] = KEYMAP ( /* Dvorak */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, \ + MO(_FL), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_LEFT, KC_RGHT, KC_BSPC, KC_SPC, KC_UP, KC_DOWN, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL) + ), + +[_QW] = KEYMAP ( /* Qwerty */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_LEFT, KC_RGHT, KC_BSPC, KC_SPC, KC_UP, KC_DOWN, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL) + ), + +[_CM] = KEYMAP ( /* Colemak */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(_FL), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_LEFT, KC_RGHT, KC_BSPC, KC_SPC, KC_UP, KC_DOWN, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL) + ), + +[_FL] = KEYMAP ( /* Function Layer 1 */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, QWERTY, DVORAK, COLEMAK, _______, _______, _______, \ + KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, \ + RESET, _______, _______, KC_HOME, KC_END, KC_DEL, KC_INS, KC_PGUP, KC_PGDN, _______, _______, _______, _______ + ), + +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/handwired/xk66/keymaps/default/readme.md b/keyboards/handwired/xk66/keymaps/default/readme.md new file mode 100644 index 000000000..6940fdd7c --- /dev/null +++ b/keyboards/handwired/xk66/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for handwired/xk66
\ No newline at end of file diff --git a/keyboards/handwired/xk66/readme.md b/keyboards/handwired/xk66/readme.md new file mode 100644 index 000000000..2aac6bde3 --- /dev/null +++ b/keyboards/handwired/xk66/readme.md @@ -0,0 +1,28 @@ +handwired/xk66 keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/handwired/xk66 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/handwired/xk66/rules.mk b/keyboards/handwired/xk66/rules.mk new file mode 100644 index 000000000..707a5385b --- /dev/null +++ b/keyboards/handwired/xk66/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/handwired/xk66/xk66.c b/keyboards/handwired/xk66/xk66.c new file mode 100644 index 000000000..3c3e31949 --- /dev/null +++ b/keyboards/handwired/xk66/xk66.c @@ -0,0 +1,8 @@ +#include "xk66.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/handwired/xk66/xk66.h b/keyboards/handwired/xk66/xk66.h new file mode 100644 index 000000000..38fe129e4 --- /dev/null +++ b/keyboards/handwired/xk66/xk66.h @@ -0,0 +1,25 @@ +#ifndef XK66_H +#define XK66_H + +#include "quantum.h" +#include "led.h" + + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2d, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, \ + K40, K41, K42, K43, K44, K45, K46, K48, K49, K4a, K4b, K4c, K4d \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, KC_NO, K2d }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, KC_NO }, \ + { K40, K41, K42, K43, K44, K45, K46, KC_NO, K48, K49, K4a, K4b, K4c, K4d } \ +} + +#endif
\ No newline at end of file |