diff options
Diffstat (limited to 'keyboards/lets_split/keymaps/OLED_sample/keymap.c')
| -rw-r--r-- | keyboards/lets_split/keymaps/OLED_sample/keymap.c | 108 |
1 files changed, 98 insertions, 10 deletions
diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c index 274f917e2..2768eb56e 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c +++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c @@ -2,7 +2,7 @@ #include "bootloader.h" #include "action_layer.h" #include "eeconfig.h" -#include "tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/TWI.h" +#include "LUFA/Drivers/Peripheral/TWI.h" #ifdef AUDIO_ENABLE #include "audio.h" #endif @@ -206,7 +206,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case QWERTY: if (record->event.pressed) { #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + PLAY_SONG(tone_qwerty); #endif persistent_default_layer_set(1UL<<_QWERTY); } @@ -215,7 +215,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case COLEMAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_colemak, false, 0); + PLAY_SONG(tone_colemak); #endif persistent_default_layer_set(1UL<<_COLEMAK); } @@ -224,7 +224,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case DVORAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + PLAY_SONG(tone_dvorak); #endif persistent_default_layer_set(1UL<<_DVORAK); } @@ -296,14 +296,14 @@ void matrix_init_user(void) { #ifdef AUDIO_ENABLE startup_user(); #endif - RGB_current_mode = rgblight_config.mode; + RGB_current_mode = rgblight_config.mode; } //SSD1306 OLED init and update loop, make sure to add #define SSD1306OLED in config.h #ifdef SSD1306OLED void matrix_master_OLED_init (void) { TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); - iota_gfx_init(); // turns on the display + iota_gfx_init(); // turns on the display } void matrix_scan_user(void) { @@ -316,12 +316,12 @@ void matrix_scan_user(void) { void startup_user() { _delay_ms(20); // gets rid of tick - PLAY_NOTE_ARRAY(tone_startup, false, 0); + PLAY_SONG(tone_startup); } void shutdown_user() { - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + PLAY_SONG(tone_goodbye); _delay_ms(150); stop_all_notes(); } @@ -333,7 +333,7 @@ void music_on_user(void) void music_scale_user(void) { - PLAY_NOTE_ARRAY(music_scale, false, 0); + PLAY_SONG(music_scale); } #endif @@ -352,8 +352,96 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) if (record->event.pressed){ return MACRO (I(10), T(H), T(E), T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); } - + } return MACRO_NONE; } + + +void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE 0 +#define L_LOWER 8 +#define L_RAISE 16 +#define L_FNLAYER 64 +#define L_NUMLAY 128 +#define L_NLOWER 136 +#define L_NFNLAYER 192 +#define L_MOUSECURSOR 256 +#define L_ADJUST 65560 + +void iota_gfx_task_user(void) { +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + matrix_write_P(&matrix, PSTR("USB: ")); +#ifdef PROTOCOL_LUFA + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + matrix_write_P(&matrix, PSTR("Unattached")); + break; + case DEVICE_STATE_Suspended: + matrix_write_P(&matrix, PSTR("Suspended")); + break; + case DEVICE_STATE_Configured: + matrix_write_P(&matrix, PSTR("Connected")); + break; + case DEVICE_STATE_Powered: + matrix_write_P(&matrix, PSTR("Powered")); + break; + case DEVICE_STATE_Default: + matrix_write_P(&matrix, PSTR("Default")); + break; + case DEVICE_STATE_Addressed: + matrix_write_P(&matrix, PSTR("Addressed")); + break; + default: + matrix_write_P(&matrix, PSTR("Invalid")); + } +#endif + +// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(&matrix, PSTR("\n\nLayer: ")); + switch (layer_state) { + case L_BASE: + matrix_write_P(&matrix, PSTR("Default")); + break; + case L_RAISE: + matrix_write_P(&matrix, PSTR("Raise")); + break; + case L_LOWER: + matrix_write_P(&matrix, PSTR("Lower")); + break; + case L_ADJUST: + matrix_write_P(&matrix, PSTR("ADJUST")); + break; + default: + matrix_write(&matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", + (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ", + (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); + matrix_write(&matrix, led); + matrix_update(&display, &matrix); +}
\ No newline at end of file |