diff options
Diffstat (limited to 'keyboards/paladin64/config.h')
| -rwxr-xr-x | keyboards/paladin64/config.h | 124 |
1 files changed, 124 insertions, 0 deletions
diff --git a/keyboards/paladin64/config.h b/keyboards/paladin64/config.h new file mode 100755 index 000000000..27f54bf16 --- /dev/null +++ b/keyboards/paladin64/config.h @@ -0,0 +1,124 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER inachie +#define PRODUCT paladin64 +#define DESCRIPTION Paladin64 ALPS 64 keyboard with trackpoint and underglow + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +#ifdef PS2_USE_USART + #define PS2_CLOCK_PORT PORTD + #define PS2_CLOCK_PIN PIND + #define PS2_CLOCK_DDR DDRD + #define PS2_CLOCK_BIT 5 + #define PS2_DATA_PORT PORTD + #define PS2_DATA_PIN PIND + #define PS2_DATA_DDR DDRD + #define PS2_DATA_BIT 2 + + /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling + * edge */ + /* set DDR of CLOCK as input to be slave */ + #define PS2_USART_INIT() do { \ + PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ + PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ + UCSR1C = ((1 << UMSEL10) | \ + (3 << UPM10) | \ + (0 << USBS1) | \ + (3 << UCSZ10) | \ + (0 << UCPOL1)); \ + UCSR1A = 0; \ + UBRR1H = 0; \ + UBRR1L = 0; \ + } while (0) + #define PS2_USART_RX_INT_ON() do { \ + UCSR1B = ((1 << RXCIE1) | \ + (1 << RXEN1)); \ + } while (0) + #define PS2_USART_RX_POLL_ON() do { \ + UCSR1B = (1 << RXEN1); \ + } while (0) + #define PS2_USART_OFF() do { \ + UCSR1C = 0; \ + UCSR1B &= ~((1 << RXEN1) | \ + (1 << TXEN1)); \ + } while (0) + #define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) + #define PS2_USART_RX_DATA UDR1 + #define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) + #define PS2_USART_RX_VECT USART1_RX_vect +#endif + +#ifdef PS2_USE_INT +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 2 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 5 + + #define PS2_INT_INIT() do { \ + EICRA |= ((1<<ISC21) | \ + (0<<ISC20)); \ + } while (0) + #define PS2_INT_ON() do { \ + EIMSK |= (1<<INT2); \ + } while (0) + #define PS2_INT_OFF() do { \ + EIMSK &= ~(1<<INT2); \ + } while (0) + #define PS2_INT_VECT INT2_vect + +#endif + +/* key matrix pins */ +#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D6, B0, D3 } +#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS +#define RGB_DI_PIN D0 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 14 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 12 +#endif + +#endif |