diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/converter/palm_usb/config.h | 120 | ||||
| -rw-r--r-- | keyboards/converter/palm_usb/matrix.c | 398 | ||||
| -rw-r--r-- | keyboards/converter/palm_usb/readme.md | 96 | ||||
| -rw-r--r-- | keyboards/converter/palm_usb/rules.mk | 46 | ||||
| -rw-r--r-- | keyboards/converter/palm_usb/stowaway/keymaps/default/keymap.c | 59 | ||||
| -rw-r--r-- | keyboards/converter/palm_usb/stowaway/rules.mk | 0 | ||||
| -rw-r--r-- | keyboards/converter/palm_usb/stowaway/stowaway.h | 53 |
7 files changed, 772 insertions, 0 deletions
diff --git a/keyboards/converter/palm_usb/config.h b/keyboards/converter/palm_usb/config.h new file mode 100644 index 000000000..4520725a1 --- /dev/null +++ b/keyboards/converter/palm_usb/config.h @@ -0,0 +1,120 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* This code makes use of cy384's Arduino USB HID adapter for the Palm Portable + Keyboard, released under the BSD licence */ + + + + +#pragma once + +#define CUSTOM_MATRIX 2 + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0100 +#define MANUFACTURER QMK +#define PRODUCT Stowaway converter +#define DESCRIPTION USB converter for Stowaway keyboard + +// IO pins to serial +// https://deskthority.net/wiki/Arduino_Pro_Micro for pin lookup +#define VCC_PIN D1 // pro micro 2 +#define RX_PIN D0 //pro micro 3 , was 8 on cy384 +#define RTS_PIN C6 // 5 //[ was D4 // 4 on the cy384 +#define DCD_PIN E6 //7 + +// if using the particular arduino pinout of CY384 +#ifdef CY384 + #define GND_PIN D7 //6 + #define PULLDOWN_PIN B1 // 15 +#endif + +#ifndef HANDSPRING +// Set to 1 for Handspring or to disable RTS/DCD based handshake. + #define HANDSPRING 0 +#endif + +#define MAXDROP 10 // check if keyboard is connected every X polling cycles +#define SLEEP_TIMEOUT 500000 // check keyboard/reset this many millis + + +#define MATRIX_ROWS 12 +#define MATRIX_COLS 8 + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \ + keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + +/* Serial(USART) configuration + * asynchronous, negative logic, 9600baud, no flow control + * 1-start bit, 8-data bit, non parity, 1-stop bit + */ +#define SERIAL_SOFT_BAUD 9600 +#define SERIAL_SOFT_PARITY_NONE +#define SERIAL_SOFT_BIT_ORDER_LSB +#if (HANDSPRING == 0) + #define SERIAL_SOFT_LOGIC_NEGATIVE //RS232 logic +#endif +/* RXD Port */ +#define SERIAL_SOFT_RXD_ENABLE + +// we are using Pro micro pin 3 / D0 as serial +#define SERIAL_SOFT_RXD_DDR DDRD +#define SERIAL_SOFT_RXD_PORT PORTD +#define SERIAL_SOFT_RXD_PIN PIND +#define SERIAL_SOFT_RXD_BIT 0 +#define SERIAL_SOFT_RXD_VECT INT0_vect + +/* RXD Interupt */ +#define SERIAL_SOFT_RXD_INIT() do { \ + /* pin configuration: input with pull-up */ \ + SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ + SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ + /* enable interrupt: INT0(rising edge) */ \ + EICRA |= ((1<<ISC01)|(1<<ISC00)); \ + EIMSK |= (1<<INT0); \ + sei(); \ +} while (0) +#define SERIAL_SOFT_RXD_INT_ENTER() +#define SERIAL_SOFT_RXD_INT_EXIT() do { \ + /* clear interrupt flag */ \ + EIFR = (1<<INTF0); \ +} while (0) +#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) + +/* TXD Port */ +#define SERIAL_SOFT_TXD_ENABLE +#define SERIAL_SOFT_TXD_DDR DDRD +#define SERIAL_SOFT_TXD_PORT PORTD +#define SERIAL_SOFT_TXD_PIN PIND +#define SERIAL_SOFT_TXD_BIT 3 +#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0) +#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0) +#define SERIAL_SOFT_TXD_INIT() do { \ + /* pin configuration: output */ \ + SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \ + /* idle */ \ + SERIAL_SOFT_TXD_ON(); \ +} while (0) + + diff --git a/keyboards/converter/palm_usb/matrix.c b/keyboards/converter/palm_usb/matrix.c new file mode 100644 index 000000000..49212f2ef --- /dev/null +++ b/keyboards/converter/palm_usb/matrix.c @@ -0,0 +1,398 @@ +/* +Copyright 2018 milestogo +with elements Copyright 2014 cy384 under a modified BSD license +building on qmk structure Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H +#include "protocol/serial.h" +#include "timer.h" +#include "pincontrol.h" + + +/* + * Matrix Array usage: + * + * ROW: 12(4bits) + * COL: 8(3bits) + * + * +---------+ + * 0|00 ... 07| + * 1|00 ... 07| + * :| ... | + * :| ... | + * A| | + * B| | + * +---------+ + */ +static uint8_t matrix[MATRIX_ROWS]; + + +// we're going to need a sleep timer +static uint16_t last_activity ; +// and a byte to track duplicate up events signalling all keys up. +static uint16_t last_upKey ; +// serial device can disconnect. Check every MAXDROP characters. +static uint16_t disconnect_counter = 0; + + +// bitmath masks. +#define KEY_MASK 0b10000000 +#define COL_MASK 0b00000111 +#define ROW_MASK 0b01111000 + + +#define ROW(code) (( code & ROW_MASK ) >>3) +#define COL(code) ((code & COL_MASK) ) +#define KEYUP(code) ((code & KEY_MASK) >>7 ) + +static bool is_modified = false; + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + + +void pins_init(void) { + // set pins for pullups, Rts , power &etc. + + //print ("pins setup\n"); + pinMode(VCC_PIN, PinDirectionOutput); + digitalWrite(VCC_PIN, PinLevelLow); + +#if ( HANDSPRING == 0) + +#ifdef CY835 + pinMode(GND_PIN, PinDirectionOutput); + digitalWrite(GND_PIN, PinLevelLow); + + pinMode(PULLDOWN_PIN, PinDirectionOutput); + digitalWrite(PULLDOWN_PIN, PinLevelLow); +#endif + + pinMode(DCD_PIN, PinDirectionInput); + pinMode(RTS_PIN, PinDirectionInput); +#endif + +/* check that the other side isn't powered up. + test=digitalRead(DCD_PIN); + xprintf("b%02X:", test); + test=digitalRead(RTS_PIN); + xprintf("%02X\n", test); +*/ + +} + +uint8_t rts_reset(void) { + static uint8_t firstread ; +/* bounce RTS so device knows it is rebooted */ + +// On boot, we keep rts as input, then switch roles here +// on leaving sleep, we toggle the same way + + firstread=digitalRead(RTS_PIN); + // printf("r%02X:", firstread); + + pinMode(RTS_PIN, PinDirectionOutput); + + if (firstread == PinLevelHigh) { + digitalWrite(RTS_PIN, PinLevelLow); + } + _delay_ms(10); + digitalWrite(RTS_PIN, PinLevelHigh); + + +/* the future is Arm + if (palReadPad(RTS_PIN_IOPRT) == PinLevelLow) + { + _delay_ms(10); + palSetPadMode(RTS_PINn_IOPORT, PinDirectionOutput_PUSHPULL); + palSetPad(RTS_PORT, RTS_PIN); + } + else + { + palSetPadMode(RTS_PIN_RTS_PORT, PinDirectionOutput_PUSHPULL); + palSetPad(RTS_PORT, RTS_PIN); + palClearPad(RTS_PORT, RTS_PIN); + _delay_ms(10); + palSetPad(RTS_PORT, RTS_PIN); + } +*/ + + + _delay_ms(5); + //print("rts\n"); + return 1; +} + +uint8_t get_serial_byte(void) { + static uint8_t code; + while(1) { + code = serial_recv(); + if (code) { + debug_hex(code); debug(" "); + return code; + } + } +} + +uint8_t palm_handshake(void) { + // assumes something has seen DCD go high, we've toggled RTS + // and we now need to verify handshake. + // listen for up to 4 packets before giving up. + // usually I get the sequence FF FA FD + static uint8_t codeA=0; + + for (uint8_t i=0; i < 5; i++) { + codeA=get_serial_byte(); + if ( 0xFA == codeA) { + if( 0xFD == get_serial_byte()) { + return 1; + } + } + } + return 0; +} + +uint8_t palm_reset(void) { + print("@"); + rts_reset(); // shouldn't need to power cycle. + + if ( palm_handshake() ) { + last_activity = timer_read(); + return 1; + } else { + print("failed reset"); + return 0; + } + +} + +uint8_t handspring_handshake(void) { + // should be sent 15 ms after power up. + // listen for up to 4 packets before giving up. + static uint8_t codeA=0; + + for (uint8_t i=0; i < 5; i++) { + codeA=get_serial_byte(); + if ( 0xF9 == codeA) { + if( 0xFB == get_serial_byte()) { + return 1; + } + } + } + return 0; +} + +uint8_t handspring_reset(void) { + digitalWrite(VCC_PIN, PinLevelLow); + _delay_ms(5); + digitalWrite(VCC_PIN, PinLevelHigh); + + if ( handspring_handshake() ) { + last_activity = timer_read(); + disconnect_counter=0; + return 1; + } else { + print("-HSreset"); + return 0; + } +} + +void matrix_init(void) +{ + debug_enable = true; + //debug_matrix =true; + + serial_init(); // arguments all #defined + +#if (HANDSPRING == 0) + pins_init(); // set all inputs and outputs. +#endif + + print("power up\n"); + digitalWrite(VCC_PIN, PinLevelHigh); + + // wait for DCD strobe from keyboard - it will do this + // up to 3 times, then the board needs the RTS toggled to try again + +#if ( HANDSPRING == 1) + if ( handspring_handshake() ) { + last_activity = timer_read(); + } else { + print("failed handshake"); + _delay_ms(1000); + //BUG /should/ power cycle or toggle RTS & reset, but this usually works. + } + +#else /// Palm / HP device with DCD + while( digitalRead(DCD_PIN) != PinLevelHigh ) {;} + print("dcd\n"); + + rts_reset(); // at this point the keyboard should think all is well. + + if ( palm_handshake() ) { + last_activity = timer_read(); + } else { + print("failed handshake"); + _delay_ms(1000); + //BUG /should/ power cycle or toggle RTS & reset, but this usually works. + } + +#endif + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; + + matrix_init_quantum(); + return; + + +} + + +uint8_t matrix_scan(void) +{ + uint8_t code; + code = serial_recv(); + if (!code) { +/* + disconnect_counter ++; + if (disconnect_counter > MAXDROP) { + // set all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; + } +*/ + // check if the keyboard is asleep. + if (timer_elapsed(last_activity) > SLEEP_TIMEOUT) { +#if(HANDSPRING ==0 ) + palm_reset(); +#else + handspring_reset(); +#endif + return 0; + } + + } + + last_activity = timer_read(); + disconnect_counter=0; // if we are getting serial data, we're connected. + + debug_hex(code); debug(" "); + + + switch (code) { + case 0xFD: // unexpected reset byte 2 + print("rstD "); + return 0; + case 0xFA: // unexpected reset + print("rstA "); + return 0; + } + + if (KEYUP(code)) { + if (code == last_upKey) { + // all keys are not pressed. + // Manual says to disable all modifiers left open now. + // but that could defeat sticky keys. + // BUG? dropping this byte. + last_upKey=0; + return 0; + } + // release + if (matrix_is_on(ROW(code), COL(code))) { + matrix[ROW(code)] &= ~(1<<COL(code)); + last_upKey=code; + } + } else { + // press + if (!matrix_is_on(ROW(code), COL(code))) { + matrix[ROW(code)] |= (1<<COL(code)); + + } + } + + matrix_scan_quantum(); + return code; +} + +bool matrix_is_modified(void) +{ + return is_modified; +} + +inline +bool matrix_has_ghost(void) +{ + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +inline +uint8_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < matrix_rows(); row++) { + phex(row); print(": "); + pbin_reverse(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop(matrix[i]); + } + return count; +} diff --git a/keyboards/converter/palm_usb/readme.md b/keyboards/converter/palm_usb/readme.md new file mode 100644 index 000000000..17ba329da --- /dev/null +++ b/keyboards/converter/palm_usb/readme.md @@ -0,0 +1,96 @@ +# Stowaway Serial keyboard to USB protocol converter + +A converter for Palm Pilot era Stowaway serial keyboards. + +Makes extensive use of the code from [cy384](https://github.com/cy384/ppk_usb). Ported to QMK by [milestogo](https://github.com/milestogo). + +Hardware Supported: See hardware section below +Hardware Availability: self-built + +Make example for this keyboard (after setting up your build environment): + + make converter/palm_usb/stowaway:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + + +## Hardware + +Target MCU is ATMega32u4 but other USB capable AVRs should also work. + +cy843 has a very specific way of wiring in order to fit all pins in sequence. It breaks +qmk because the Arduino softserial library uses different pins from QMK. + +I've wired the pro micro hardware as follows. + +Label| TX0,RX1,GND,GND,2 ,3 ,4 ,5 ,6 ,7 +Palm | , , * ,GND,VCC,RX ,NC ,RTS,nc ,DCD +MCU | ,D1 ,D0 , ,C6 , ,E6 + +\* The RX line from the keyboard should be conected to a ~10K ohm pull down resistor to ground. +RX --|--3 + 10K + | + GND + + +Power management is not implemented yet, this just reboots the keyboard frequently. + +### Keyboards: + +Think Outside Stowaway Keyboards +There are at least 5 different versions of these keyboards out there. + +Group 1: Palm 3, Palm 5 & HP Journada 540, and Compaq iPaq keyboards. These share +the same RTS protocol, but with different pinouts for each device. + +Group 2: Handspring keyboards. These don't do handshaking protocol, and use TTL signal. +Set HANDSPRING to 1 in config.h + +Group 3: IRDA models. Untested but theoretically serial. + +### Connectors + +See https://github.com/cy384/ppk_usb for wiring & sample 3d printable sockets. + +Only Palm3 wiring has been tested. +RXD pin is output from keyboard to MCU's RX. + +Viewed from left to right with the keyboard in typing position. + +Palm3: [NC, VCC, RXD, RTS, NC, NC, DCD, NC, NC, GND] +Palm5: [NC, VCC, RXD, RTS, NC, NC, DCD, NC, NC, GND] (same order, different connector) +Handspring: [VCC/TXD, NC, NC, NC, GND, NC, NC, RXD] +Journada: [NC, NC, NC, GND, NC, RTS, NC, DTR/VCC, RXD, DCD, NC] [GND-IN, VCC-IN] +Ipaq: [NC, NC, DTR/VCC, NC, NC, RTS, NC, RXD, DCD, GND, NC, NC] + +### Protocol + + Signal: Asynchronous, Negative logic, 9600baud, No Flow control + Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit + + AVR USART engine expects positive logic while stowaway keyboard signal is negative. + To use AVR UART engine you need external inverter in front of RX and TX pin. + Otherwise you can software serial routine to communicate the keyboard. + +This converter uses software method, you doesn't need any inverter part. + + +Commands From System To Keyboard + none + +Commands From Keyboard To System + + 0xFA Reset/Ready Response(followed by 0xFD) + +References + +* http://www.splorp.com/pdf/stowawayhwref.pdf + +### Todo +- Test on anything but a palm 3 model keyboard. +- Change all of the soft serial to match the new Helix based code so that it is easier +to switch pins. +- The driver should check for a keyboard that pressed the delete key then disconnected. +Check every MAXDROP scans that the keyboard is there, and if not, clear the matrix. +Not implemented yet, since matrix scan is so much faster than serial. diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk new file mode 100644 index 000000000..35ea3995e --- /dev/null +++ b/keyboards/converter/palm_usb/rules.mk @@ -0,0 +1,46 @@ +MCU = atmega32u4 # Teensy 2.0 +F_CPU = 16000000 +ARCH = AVR8 +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +BOOTLOADER = caterina + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +UNICODEMAP_ENABLE = no +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +CUSTOM_MATRIX = yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +#HARDWARE_SERIAL = yes + +SRC += matrix.c + +ifdef HARDWARE_SERIAL + # untested with palm_usb + SRC += protocol/serial_uart.c + OPT_DEFS += -DHARDWARE_SERIAL +else + SRC += protocol/serial_soft.c +endif + +DEFAULT_FOLDER = converter/palm_usb/stowaway + diff --git a/keyboards/converter/palm_usb/stowaway/keymaps/default/keymap.c b/keyboards/converter/palm_usb/stowaway/keymaps/default/keymap.c new file mode 100644 index 000000000..09b41f95c --- /dev/null +++ b/keyboards/converter/palm_usb/stowaway/keymaps/default/keymap.c @@ -0,0 +1,59 @@ +/* + Copyright 2018 milestogo + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +enum layers { +_QWERTY=0, +_CDH, +_FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BACK, APP0, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, APP1, + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, APP2, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, APP3, + LCTL, FN, LALT, CMD, SPACE,SPACE,GRAVE,DONE, DEL, LEFT, DOWN, RIGHT + +*/ + [_QWERTY] = LAYOUT( /* Base */ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, TG(_CDH), + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, MO(_FN), KC_LALT, KC_LGUI, KC_SPACE,KC_SPACE,KC_GRAVE,KC_RGUI, KC_DEL, KC_LEFT,KC_DOWN, KC_RIGHT + ), + + [_CDH] = LAYOUT( /* Base */ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, _______, + KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, MO(_FN), KC_LALT, KC_LGUI, KC_SPACE,KC_SPACE,KC_GRAVE,KC_RGUI, KC_DEL, KC_LEFT,KC_DOWN, KC_RIGHT + ), + + [_FN] = LAYOUT( // FN Key + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_ENT, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/converter/palm_usb/stowaway/rules.mk b/keyboards/converter/palm_usb/stowaway/rules.mk new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/keyboards/converter/palm_usb/stowaway/rules.mk diff --git a/keyboards/converter/palm_usb/stowaway/stowaway.h b/keyboards/converter/palm_usb/stowaway/stowaway.h new file mode 100644 index 000000000..71af9bf4a --- /dev/null +++ b/keyboards/converter/palm_usb/stowaway/stowaway.h @@ -0,0 +1,53 @@ +/* +Copyright 2018 milestogo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + + +/* Stowaway Keyboard + based on matrix from http://www.splorp.com/pdf/stowawayhwref.pdf + + 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BACK APP0, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, APP1, + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, APP2, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, APP3, + LCTL, FN, LALT, CMD, SPACE,SPACE,GRAVE,DONE, DEL, LEFT, DOWN, RIGHT + +*/ +#define LAYOUT( \ + K000, K001, K002, K004, K005, K006, K007, K064, K065, K066, K060, K061, K062, K063,\ + K031, K011, K012, K013, K014, K015, K016, K074, K075, K076, K077, K070, K071, K072, K073,\ + K030, K021, K022, K023, K024, K025, K026, K084, K085, K086, K087, K080, K081, K082,\ + K110, K003, K020, K054, K055, K056, K057, K094, K095, K096, K090, K111, K091, K092,\ + K032, K042, K043, K010, K027, K067, K017, K097, K100, K101, K102, K103 \ +) { \ + { K000, K001, K002 , K003, K004, K005, K006, K007 }, \ + { K010, K011, K012 , K013, K014, K015, K016, K017 }, \ + { K020, K021, K022 , K023, K024, K025, K026, K027 }, \ + { K030, K031, K032 , KC_NO,KC_NO, KC_NO,KC_NO, KC_NO }, \ + { KC_NO, KC_NO, K042 , K043, KC_NO, KC_NO,KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO,K054, K055, K056, K057 }, \ + { K060, K061, K062 , K063, K064, K065, K066, K067 }, \ + { K070, K071, K072 , K073, K074, K075, K076, K077 }, \ + { K080, K081, K082 , KC_NO,K084, K085, K086, K087 }, \ + { K090, K091, K092 , KC_NO,K094, K095, K096, K097 }, \ + { K100, K101, K102 , K103, KC_NO, KC_NO,KC_NO, KC_NO }, \ + { K110, K111, KC_NO, KC_NO,KC_NO, KC_NO,KC_NO, KC_NO } \ +} + |