diff options
Diffstat (limited to 'lib/lufa/Demos/Device/ClassDriver/RNDISEthernet')
30 files changed, 6299 insertions, 0 deletions
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h new file mode 100644 index 000000000..0e4d1780a --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h @@ -0,0 +1,60 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} + #define SERVER_IP_ADDRESS { 10, 0, 0, 2} + + #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00} + #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} + + #define NO_DECODE_ETHERNET + #define NO_DECODE_ARP + #define NO_DECODE_IP + #define NO_DECODE_ICMP + #define NO_DECODE_TCP + #define NO_DECODE_UDP + #define NO_DECODE_DHCP + +#endif diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h new file mode 100644 index 000000000..cc828a108 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h @@ -0,0 +1,126 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #elif (ARCH == ARCH_XMEGA) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH) +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define MAX_ENDPOINT_INDEX 3 +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c new file mode 100644 index 000000000..e42b31860 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c @@ -0,0 +1,244 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(1,1,0), + .Class = CDC_CSCP_CDCClass, + .SubClass = CDC_CSCP_NoSpecificSubclass, + .Protocol = CDC_CSCP_NoSpecificProtocol, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, + .ProductID = 0x204C, + .ReleaseNumber = VERSION_BCD(0,0,1), + + .ManufacturerStrIndex = STRING_ID_Manufacturer, + .ProductStrIndex = STRING_ID_Product, + .SerialNumStrIndex = NO_DESCRIPTOR, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 2, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED), + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .CDC_CCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_CDC_CCI, + .AlternateSetting = 0, + + .TotalEndpoints = 1, + + .Class = CDC_CSCP_CDCClass, + .SubClass = CDC_CSCP_ACMSubclass, + .Protocol = CDC_CSCP_VendorSpecificProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_Functional_Header = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, + .Subtype = CDC_DSUBTYPE_CSInterface_Header, + + .CDCSpecification = VERSION_BCD(1,1,0), + }, + + .CDC_Functional_ACM = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, + .Subtype = CDC_DSUBTYPE_CSInterface_ACM, + + .Capabilities = 0x00, + }, + + .CDC_Functional_Union = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, + .Subtype = CDC_DSUBTYPE_CSInterface_Union, + + .MasterInterfaceNumber = INTERFACE_ID_CDC_CCI, + .SlaveInterfaceNumber = INTERFACE_ID_CDC_DCI, + }, + + .CDC_NotificationEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_NOTIFICATION_EPADDR, + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_NOTIFICATION_EPSIZE, + .PollingIntervalMS = 0xFF + }, + + .CDC_DCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_CDC_DCI, + .AlternateSetting = 0, + + .TotalEndpoints = 2, + + .Class = CDC_CSCP_CDCDataClass, + .SubClass = CDC_CSCP_NoDataSubclass, + .Protocol = CDC_CSCP_NoDataProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .RNDIS_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_RX_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .RNDIS_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_TX_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x05 + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera"); + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA RNDIS CDC Demo"); + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + const void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case STRING_ID_Language: + Address = &LanguageString; + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case STRING_ID_Manufacturer: + Address = &ManufacturerString; + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case STRING_ID_Product: + Address = &ProductString; + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h new file mode 100644 index 000000000..866ccd61a --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h @@ -0,0 +1,112 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include <LUFA/Drivers/USB/USB.h> + + #include <avr/pgmspace.h> + + #include "Config/AppConfig.h" + + /* Macros: */ + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) + + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) + + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) + + /** Size in bytes of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPSIZE 8 + + /** Size in bytes of the CDC data IN and OUT endpoints. */ + #define CDC_TXRX_EPSIZE 64 + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + + // RNDIS CDC Control Interface + USB_Descriptor_Interface_t CDC_CCI_Interface; + USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header; + USB_CDC_Descriptor_FunctionalACM_t CDC_Functional_ACM; + USB_CDC_Descriptor_FunctionalUnion_t CDC_Functional_Union; + USB_Descriptor_Endpoint_t CDC_NotificationEndpoint; + + // RNDIS CDC Data Interface + USB_Descriptor_Interface_t CDC_DCI_Interface; + USB_Descriptor_Endpoint_t RNDIS_DataOutEndpoint; + USB_Descriptor_Endpoint_t RNDIS_DataInEndpoint; + } USB_Descriptor_Configuration_t; + + /** Enum for the device interface descriptor IDs within the device. Each interface descriptor + * should have a unique ID index associated with it, which can be used to refer to the + * interface from other descriptors. + */ + enum InterfaceDescriptors_t + { + INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */ + INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */ + }; + + /** Enum for the device string descriptor IDs within the device. Each string descriptor should + * have a unique ID index associated with it, which can be used to refer to the string from + * other descriptors. + */ + enum StringDescriptors_t + { + STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */ + STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */ + STRING_ID_Product = 2, /**< Product string ID */ + }; + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/LUFA RNDIS.inf b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/LUFA RNDIS.inf new file mode 100644 index 000000000..f34e55f99 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/LUFA RNDIS.inf @@ -0,0 +1,59 @@ +; Windows LUFA RNDIS Setup File +; Copyright (c) 2000 Microsoft Corporation + +[DefaultInstall] +CopyINF="LUFA RNDIS.inf" + +[Version] +Signature="$Windows NT$" +Class=Net +ClassGuid={4d36e972-e325-11ce-bfc1-08002be10318} +Provider=%MFGNAME% +DriverVer=7/1/2012,10.0.0.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64 + +[ControlFlags] +ExcludeFromSelect=* + +[DriverInstall] +Characteristics=0x84 ; NCF_PHYSICAL + NCF_HAS_UI +BusType=15 +include=netrndis.inf +needs=Usb_Rndis.ndi +AddReg=Rndis_AddReg_Vista + +[DriverInstall.Services] +include=netrndis.inf +needs=Usb_Rndis.ndi.Services + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C + +[DeviceList.NTx86] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C + +[DeviceList.NTia64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGNAME="http://www.lufa-lib.org" +DESCRIPTION="LUFA USB RNDIS Demo" diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c new file mode 100644 index 000000000..518ba8c6a --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c @@ -0,0 +1,87 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Address Resolution Protocol (ARP) packet handling routines. This protocol handles the + * conversion of physical MAC addresses to protocol IP addresses between the host and the + * device. + */ + +#include "ARP.h" + +/** Processes an ARP packet inside an Ethernet frame, and writes the appropriate response + * to the output Ethernet frame if the host is requesting the IP or MAC address of the + * virtual server device on the network. + * + * \param[in] InDataStart Pointer to the start of the incoming packet's ARP header + * \param[out] OutDataStart Pointer to the start of the outgoing packet's ARP header + * + * \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise + */ +int16_t ARP_ProcessARPPacket(void* InDataStart, + void* OutDataStart) +{ + DecodeARPHeader(InDataStart); + + ARP_Header_t* ARPHeaderIN = (ARP_Header_t*)InDataStart; + ARP_Header_t* ARPHeaderOUT = (ARP_Header_t*)OutDataStart; + + /* Ensure that the ARP request is a IPv4 request packet */ + if ((SwapEndian_16(ARPHeaderIN->ProtocolType) == ETHERTYPE_IPV4) && + (SwapEndian_16(ARPHeaderIN->Operation) == ARP_OPERATION_REQUEST)) + { + /* If the ARP packet is requesting the MAC or IP of the virtual webserver, return the response */ + if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) || + MAC_COMPARE(&ARPHeaderIN->THA, &ServerMACAddress)) + { + /* Fill out the ARP response header */ + ARPHeaderOUT->HardwareType = ARPHeaderIN->HardwareType; + ARPHeaderOUT->ProtocolType = ARPHeaderIN->ProtocolType; + ARPHeaderOUT->HLEN = ARPHeaderIN->HLEN; + ARPHeaderOUT->PLEN = ARPHeaderIN->PLEN; + ARPHeaderOUT->Operation = SwapEndian_16(ARP_OPERATION_REPLY); + + /* Copy over the sender MAC/IP to the target fields for the response */ + ARPHeaderOUT->THA = ARPHeaderIN->SHA; + ARPHeaderOUT->TPA = ARPHeaderIN->SPA; + + /* Copy over the new sender MAC/IP - MAC and IP addresses of the virtual webserver */ + ARPHeaderOUT->SHA = ServerMACAddress; + ARPHeaderOUT->SPA = ServerIPAddress; + + /* Return the size of the response so far */ + return sizeof(ARP_Header_t); + } + } + + return NO_RESPONSE; +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h new file mode 100644 index 000000000..e64c38ec5 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h @@ -0,0 +1,76 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for ARP.c. + */ + +#ifndef _ARP_H_ +#define _ARP_H_ + + /* Includes: */ + #include <avr/io.h> + #include <string.h> + + #include "EthernetProtocols.h" + #include "Ethernet.h" + #include "ProtocolDecoders.h" + + /* Macros: */ + /** ARP header operation constant, indicating a request from a host for an address translation. */ + #define ARP_OPERATION_REQUEST 1 + + /** ARP header operation constant, indicating a reply from a host giving an address translation. */ + #define ARP_OPERATION_REPLY 2 + + /* Type Defines: */ + /** Type define for an ARP packet inside an Ethernet frame. */ + typedef struct + { + uint16_t HardwareType; /**< Hardware type constant, indicating the hardware used */ + uint16_t ProtocolType; /**< Protocol being resolved, usually ETHERTYPE_IPV4 */ + + uint8_t HLEN; /**< Length in bytes of the source/destination hardware addresses */ + uint8_t PLEN; /**< Length in bytes of the source/destination protocol addresses */ + uint16_t Operation; /**< Type of operation, either ARP_OPERATION_REQUEST or ARP_OPERATION_REPLY */ + + MAC_Address_t SHA; /**< Sender's hardware address */ + IP_Address_t SPA; /**< Sender's protocol address */ + MAC_Address_t THA; /**< Target's hardware address */ + IP_Address_t TPA; /**< Target's protocol address */ + } ARP_Header_t; + + /* Function Prototypes: */ + int16_t ARP_ProcessARPPacket(void* InDataStart, + void* OutDataStart); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c new file mode 100644 index 000000000..7adc64836 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c @@ -0,0 +1,129 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Dynamic Host Configuration Protocol (DHCP) packet handling routines. This protocol + * handles the automatic IP negotiation to the host, so that the host will use the provided + * IP address given to it by the device. + */ + +#include "DHCP.h" + +/** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response + * to the output Ethernet frame if the host is requesting or accepting an IP address. + * + * \param[in] IPHeaderInStart Pointer to the start of the incoming packet's IP header + * \param[in] DHCPHeaderInStart Pointer to the start of the incoming packet's DHCP header + * \param[out] DHCPHeaderOutStart Pointer to the start of the outgoing packet's DHCP header + * + * \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise + */ +int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, + void* DHCPHeaderInStart, + void* DHCPHeaderOutStart) +{ + IP_Header_t* IPHeaderIN = (IP_Header_t*)IPHeaderInStart; + DHCP_Header_t* DHCPHeaderIN = (DHCP_Header_t*)DHCPHeaderInStart; + DHCP_Header_t* DHCPHeaderOUT = (DHCP_Header_t*)DHCPHeaderOutStart; + + uint8_t* DHCPOptionsINStart = ((uint8_t*)DHCPHeaderInStart + sizeof(DHCP_Header_t)); + uint8_t* DHCPOptionsOUTStart = ((uint8_t*)DHCPHeaderOutStart + sizeof(DHCP_Header_t)); + + DecodeDHCPHeader(DHCPHeaderInStart); + + /* Zero out the response DHCP packet, as much of it is legacy and left at 0 */ + memset(DHCPHeaderOUT, 0, sizeof(DHCP_Header_t)); + + /* Fill out the response DHCP packet */ + DHCPHeaderOUT->HardwareType = DHCPHeaderIN->HardwareType; + DHCPHeaderOUT->Operation = DHCP_OP_BOOTREPLY; + DHCPHeaderOUT->HardwareAddressLength = DHCPHeaderIN->HardwareAddressLength; + DHCPHeaderOUT->Hops = 0; + DHCPHeaderOUT->TransactionID = DHCPHeaderIN->TransactionID; + DHCPHeaderOUT->ElapsedSeconds = 0; + DHCPHeaderOUT->Flags = DHCPHeaderIN->Flags; + DHCPHeaderOUT->YourIP = ClientIPAddress; + memmove(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t)); + DHCPHeaderOUT->Cookie = SwapEndian_32(DHCP_MAGIC_COOKIE); + + /* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that + when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */ + IPHeaderIN->SourceAddress = ClientIPAddress; + IPHeaderIN->DestinationAddress = ServerIPAddress; + + /* Process the incoming DHCP packet options */ + while (DHCPOptionsINStart[0] != DHCP_OPTION_END) + { + /* Find the Message Type DHCP option, to determine the type of DHCP packet */ + if (DHCPOptionsINStart[0] == DHCP_OPTION_MESSAGETYPE) + { + if ((DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) || (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_REQUEST)) + { + /* Fill out the response DHCP packet options for a DHCP OFFER or ACK response */ + + *(DHCPOptionsOUTStart++) = DHCP_OPTION_MESSAGETYPE; + *(DHCPOptionsOUTStart++) = 1; + *(DHCPOptionsOUTStart++) = (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) ? DHCP_MESSAGETYPE_OFFER + : DHCP_MESSAGETYPE_ACK; + + *(DHCPOptionsOUTStart++) = DHCP_OPTION_SUBNETMASK; + *(DHCPOptionsOUTStart++) = sizeof(IP_Address_t); + *(DHCPOptionsOUTStart++) = 0xFF; + *(DHCPOptionsOUTStart++) = 0xFF; + *(DHCPOptionsOUTStart++) = 0xFF; + *(DHCPOptionsOUTStart++) = 0x00; + + *(DHCPOptionsOUTStart++) = DHCP_OPTION_LEASETIME; + *(DHCPOptionsOUTStart++) = sizeof(uint32_t); + /* Lease Time 86400s (ONE_DAY) */ + *(DHCPOptionsOUTStart++) = 0x00; + *(DHCPOptionsOUTStart++) = 0x01; + *(DHCPOptionsOUTStart++) = 0x51; + *(DHCPOptionsOUTStart++) = 0x80; + + *(DHCPOptionsOUTStart++) = DHCP_OPTION_DHCPSERVER; + *(DHCPOptionsOUTStart++) = sizeof(IP_Address_t); + memcpy(DHCPOptionsOUTStart, &ServerIPAddress, sizeof(IP_Address_t)); + DHCPOptionsOUTStart += sizeof(IP_Address_t); + + *(DHCPOptionsOUTStart++) = DHCP_OPTION_END; + + return (sizeof(DHCP_Header_t) + 18 + sizeof(IP_Address_t)); + } + } + + /* Go to the next DHCP option - skip one byte if option is a padding byte, else skip the complete option's size */ + DHCPOptionsINStart += ((DHCPOptionsINStart[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptionsINStart[1] + 2)); + } + + return NO_RESPONSE; +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h new file mode 100644 index 000000000..5ef78469e --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h @@ -0,0 +1,131 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for DHCP.c. + */ + +#ifndef _DHCP_H_ +#define _DHCP_H_ + + /* Includes: */ + #include <avr/io.h> + #include <string.h> + + #include "EthernetProtocols.h" + #include "Ethernet.h" + #include "ProtocolDecoders.h" + + /* Macros: */ + /** DHCP operation constant, indicating a request from a host to a DHCP server. */ + #define DHCP_OP_BOOTREQUEST 0x01 + + /** DHCP operation constant, indicating a reply from a DHCP server to a host. */ + #define DHCP_OP_BOOTREPLY 0x02 + + /** Hardware type constant, indicating Ethernet as a carrier. */ + #define DHCP_HTYPE_ETHERNET 0x01 + + /** Magic boot protocol "cookie", inserted into all BOOTP packets (BOOTP is the carrier of DHCP). */ + #define DHCP_MAGIC_COOKIE 0x63825363 + + /** DHCP option list entry header, indicating that a subnet mask will follow. */ + #define DHCP_OPTION_SUBNETMASK 1 + + /** DHCP option list entry header, indicating that the Lease Time will follow. */ + #define DHCP_OPTION_LEASETIME 51 + + /** DHCP option list entry header, indicating that the DHCP message type constant will follow. */ + #define DHCP_OPTION_MESSAGETYPE 53 + + /** DHCP option list entry header, indicating that the IP address of the DHCP server will follow. */ + #define DHCP_OPTION_DHCPSERVER 54 + + /** DHCP option list entry header, used to pad out option data. */ + #define DHCP_OPTION_PAD 0 + + /** DHCP option list entry header, indicating the end of option data. */ + #define DHCP_OPTION_END 255 + + /** Message type constant, used in the DHCP option data field, requesting that a DHCP server offer an IP address. */ + #define DHCP_MESSAGETYPE_DISCOVER 1 + + /** Message type constant, used in the DHCP option data field, indicating that a DHCP server is offering an IP address. */ + #define DHCP_MESSAGETYPE_OFFER 2 + + /** Message type constant, used in the DHCP option data field, requesting that a DHCP server lease a given IP address. */ + #define DHCP_MESSAGETYPE_REQUEST 3 + + /** Message type constant, used in the DHCP option data field, declining an offered DHCP server IP address lease. */ + #define DHCP_MESSAGETYPE_DECLINE 4 + + /** Message type constant, used in the DHCP option data field, ACKing a host IP lease request. */ + #define DHCP_MESSAGETYPE_ACK 5 + + /** Message type constant, used in the DHCP option data field, NACKing a host IP lease request. */ + #define DHCP_MESSAGETYPE_NACK 6 + + /** Message type constant, used in the DHCP option data field, indicating that a host is releasing a leased IP address. */ + #define DHCP_MESSAGETYPE_RELEASE 7 + + /* Type Defines: */ + /** Type define for a DHCP packet inside an Ethernet frame. */ + typedef struct + { + uint8_t Operation; /**< DHCP operation, either DHCP_OP_BOOTREQUEST or DHCP_OP_BOOTREPLY */ + uint8_t HardwareType; /**< Hardware carrier type constant */ + uint8_t HardwareAddressLength; /**< Length in bytes of a hardware (MAC) address on the network */ + uint8_t Hops; /**< Number of hops required to reach the server, unused */ + + uint32_t TransactionID; /**< Unique ID of the DHCP packet, for positive matching between sent and received packets */ + + uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */ + uint16_t Flags; /**< BOOTP packet flags */ + + IP_Address_t ClientIP; /**< Client IP address, if already leased an IP */ + IP_Address_t YourIP; /**< Client IP address */ + IP_Address_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */ + IP_Address_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */ + + uint8_t ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */ + uint8_t ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */ + uint8_t BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */ + + uint32_t Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */ + } DHCP_Header_t; + + /* Function Prototypes: */ + int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, + void* DHCPHeaderInStart, + void* DHCPHeaderOutStart); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c new file mode 100644 index 000000000..c28fa2336 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c @@ -0,0 +1,132 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Ethernet frame packet handling routines. This protocol handles the processing of raw Ethernet + * frames sent and received, deferring the processing of sub-packet protocols to the appropriate + * protocol handlers, such as DHCP or ARP. + */ + +#include "Ethernet.h" + +/** Constant for convenience when checking against or setting a MAC address to the virtual server MAC address. */ +const MAC_Address_t ServerMACAddress = {SERVER_MAC_ADDRESS}; + +/** Constant for convenience when checking against or setting an IP address to the virtual server IP address. */ +const IP_Address_t ServerIPAddress = {SERVER_IP_ADDRESS}; + +/** Constant for convenience when checking against or setting a MAC address to the broadcast MAC address. */ +const MAC_Address_t BroadcastMACAddress = {BROADCAST_MAC_ADDRESS}; + +/** Constant for convenience when checking against or setting a IP address to the broadcast IP address. */ +const IP_Address_t BroadcastIPAddress = {BROADCAST_IP_ADDRESS}; + +/** Constant for convenience when checking against or setting an IP address to the client (host) IP address. */ +const IP_Address_t ClientIPAddress = {CLIENT_IP_ADDRESS}; + + +/** Processes an incoming Ethernet frame, and writes the appropriate response to the output Ethernet + * frame buffer if the sub protocol handlers create a valid response. + */ +void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, + Ethernet_Frame_Info_t* const FrameOUT) +{ + DecodeEthernetFrameHeader(FrameIN->FrameData); + + /* Cast the incoming Ethernet frame to the Ethernet header type */ + Ethernet_Frame_Header_t* FrameINHeader = (Ethernet_Frame_Header_t*)&FrameIN->FrameData; + Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT->FrameData; + + int16_t RetSize = NO_RESPONSE; + + /* Ensure frame is addressed to either all (broadcast) or the virtual webserver, and is a type II frame */ + if ((MAC_COMPARE(&FrameINHeader->Destination, &ServerMACAddress) || + MAC_COMPARE(&FrameINHeader->Destination, &BroadcastMACAddress)) && + (SwapEndian_16(FrameIN->FrameLength) > ETHERNET_VER2_MINSIZE)) + { + /* Process the packet depending on its protocol */ + switch (SwapEndian_16(FrameINHeader->EtherType)) + { + case ETHERTYPE_ARP: + RetSize = ARP_ProcessARPPacket(&FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)], + &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]); + break; + case ETHERTYPE_IPV4: + RetSize = IP_ProcessIPPacket(FrameIN, + &FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)], + &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]); + break; + } + + /* Protocol processing routine has filled a response, complete the ethernet frame header */ + if (RetSize > 0) + { + /* Fill out the response Ethernet frame header */ + FrameOUTHeader->Source = ServerMACAddress; + FrameOUTHeader->Destination = FrameINHeader->Source; + FrameOUTHeader->EtherType = FrameINHeader->EtherType; + + /* Set the response length in the buffer and indicate that a response is ready to be sent */ + FrameOUT->FrameLength = (sizeof(Ethernet_Frame_Header_t) + RetSize); + } + } + + /* Check if the packet was processed */ + if (RetSize != NO_PROCESS) + { + /* Clear the frame buffer */ + FrameIN->FrameLength = 0; + } +} + +/** Calculates the appropriate ethernet checksum, consisting of the addition of the one's + * compliment of each word, complimented. + * + * \param[in] Data Pointer to the packet buffer data whose checksum must be calculated + * \param[in] Bytes Number of bytes in the data buffer to process + * + * \return A 16-bit Ethernet checksum value + */ +uint16_t Ethernet_Checksum16(void* Data, + uint16_t Bytes) +{ + uint16_t* Words = (uint16_t*)Data; + uint32_t Checksum = 0; + + for (uint16_t CurrWord = 0; CurrWord < (Bytes >> 1); CurrWord++) + Checksum += Words[CurrWord]; + + while (Checksum & 0xFFFF0000) + Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16)); + + return ~Checksum; +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h new file mode 100644 index 000000000..9bdb71c8f --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h @@ -0,0 +1,101 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Ethernet.c. + */ + +#ifndef _ETHERNET_H_ +#define _ETHERNET_H_ + + /* Includes: */ + #include <avr/io.h> + #include <string.h> + + #include <LUFA/Drivers/USB/USB.h> + + #include "Config/AppConfig.h" + + #include "EthernetProtocols.h" + #include "ProtocolDecoders.h" + #include "ICMP.h" + #include "TCP.h" + #include "UDP.h" + #include "DHCP.h" + #include "ARP.h" + #include "IP.h" + + /* Macros: */ + /** Physical MAC address of the network broadcast address. */ + #define BROADCAST_MAC_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} + + /** Performs a comparison between two MAC addresses, indicating if they are identical. + * + * \param[in] MAC1 First MAC address + * \param[in] MAC2 Second MAC address + * + * \return True if the addresses match, \c false otherwise + */ + #define MAC_COMPARE(MAC1, MAC2) (memcmp(MAC1, MAC2, sizeof(MAC_Address_t)) == 0) + + /** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard. */ + #define ETHERNET_VER2_MINSIZE 0x0600 + + /** Return value for all sub protocol handling routines, indicating that no response packet has been generated. */ + #define NO_RESPONSE 0 + + /** Return value for all sub protocol handling routines, indicating that the packet has not yet been handled. */ + #define NO_PROCESS -1 + + /* Type Defines: */ + /** Type define for an Ethernet frame header. */ + typedef struct + { + MAC_Address_t Destination; /**< Physical MAC address of the packet recipient */ + MAC_Address_t Source; /**< Physics MAC address of the packet source */ + uint16_t EtherType; /**< Ethernet packet sub-protocol type, for Ethernet V2 packets */ + } Ethernet_Frame_Header_t; + + /* External Variables: */ + extern const MAC_Address_t ServerMACAddress; + extern const IP_Address_t ServerIPAddress; + extern const MAC_Address_t BroadcastMACAddress; + extern const IP_Address_t BroadcastIPAddress; + extern const IP_Address_t ClientIPAddress; + + /* Function Prototypes: */ + void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, + Ethernet_Frame_Info_t* const FrameOUT); + uint16_t Ethernet_Checksum16(void* Data, + uint16_t Bytes); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h new file mode 100644 index 000000000..51d3f32ee --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h @@ -0,0 +1,92 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * General Ethernet protocol constants and type defines, for use by + * all network protocol portions of the TCP/IP stack. + */ + +#ifndef _ETHERNET_PROTOCOLS_H_ +#define _ETHERNET_PROTOCOLS_H_ + + /* Includes: */ + #include <LUFA/Drivers/USB/USB.h> + + /* Macros: */ + #define ETHERTYPE_IPV4 0x0800 + #define ETHERTYPE_ARP 0x0806 + #define ETHERTYPE_RARP 0x8035 + #define ETHERTYPE_APPLETALK 0x809b + #define ETHERTYPE_APPLETALKARP 0x80f3 + #define ETHERTYPE_IEEE8021Q 0x8100 + #define ETHERTYPE_NOVELLIPX 0x8137 + #define ETHERTYPE_NOVELL 0x8138 + #define ETHERTYPE_IPV6 0x86DD + #define ETHERTYPE_COBRANET 0x8819 + #define ETHERTYPE_PROVIDERBRIDGING 0x88a8 + #define ETHERTYPE_MPLSUNICAST 0x8847 + #define ETHERTYPE_MPLSMULTICAST 0x8848 + #define ETHERTYPE_PPPoEDISCOVERY 0x8863 + #define ETHERTYPE_PPPoESESSION 0x8864 + #define ETHERTYPE_EAPOVERLAN 0x888E + #define ETHERTYPE_HYPERSCSI 0x889A + #define ETHERTYPE_ATAOVERETHERNET 0x88A2 + #define ETHERTYPE_ETHERCAT 0x88A4 + #define ETHERTYPE_SERCOSIII 0x88CD + #define ETHERTYPE_CESoE 0x88D8 + #define ETHERTYPE_MACSECURITY 0x88E5 + #define ETHERTYPE_FIBRECHANNEL 0x8906 + #define ETHERTYPE_QINQ 0x9100 + #define ETHERTYPE_VLLT 0xCAFE + + #define PROTOCOL_ICMP 1 + #define PROTOCOL_IGMP 2 + #define PROTOCOL_TCP 6 + #define PROTOCOL_UDP 17 + #define PROTOCOL_OSPF 89 + #define PROTOCOL_SCTP 132 + + /* Type Defines: */ + /** Type define for an Ethernet frame buffer data and information structure. */ + typedef struct + { + uint8_t FrameData[ETHERNET_FRAME_SIZE_MAX]; /**< Ethernet frame contents. */ + uint16_t FrameLength; /**< Length in bytes of the Ethernet frame stored in the buffer. */ + } Ethernet_Frame_Info_t; + + /** Type define for a protocol IP address of a device on a network. */ + typedef struct + { + uint8_t Octets[4]; /**< Individual bytes of an IP address */ + } IP_Address_t; + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c new file mode 100644 index 000000000..24bc4b53f --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c @@ -0,0 +1,83 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Internet Control Message Protocol (ICMP) packet handling routines. This protocol handles + * Echo requests from the host, to indicate a successful network connection between the host + * and the virtual server. + */ + +#include "ICMP.h" + +/** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response + * to the output Ethernet frame if the host is issuing a ICMP ECHO request. + * + * \param[in] FrameIN Pointer to the incoming Ethernet frame information structure + * \param[in] InDataStart Pointer to the start of the incoming packet's ICMP header + * \param[out] OutDataStart Pointer to the start of the outgoing packet's ICMP header + * + * \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise + */ +int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN, + void* InDataStart, + void* OutDataStart) +{ + ICMP_Header_t* ICMPHeaderIN = (ICMP_Header_t*)InDataStart; + ICMP_Header_t* ICMPHeaderOUT = (ICMP_Header_t*)OutDataStart; + + DecodeICMPHeader(InDataStart); + + /* Determine if the ICMP packet is an echo request (ping) */ + if (ICMPHeaderIN->Type == ICMP_TYPE_ECHOREQUEST) + { + /* Fill out the ICMP response packet */ + ICMPHeaderOUT->Type = ICMP_TYPE_ECHOREPLY; + ICMPHeaderOUT->Code = 0; + ICMPHeaderOUT->Checksum = 0; + ICMPHeaderOUT->Id = ICMPHeaderIN->Id; + ICMPHeaderOUT->Sequence = ICMPHeaderIN->Sequence; + + intptr_t DataSize = FrameIN->FrameLength - ((((intptr_t)InDataStart + sizeof(ICMP_Header_t)) - (intptr_t)FrameIN->FrameData)); + + /* Copy the remaining payload to the response - echo requests should echo back any sent data */ + memmove(&((uint8_t*)OutDataStart)[sizeof(ICMP_Header_t)], + &((uint8_t*)InDataStart)[sizeof(ICMP_Header_t)], + DataSize); + + ICMPHeaderOUT->Checksum = Ethernet_Checksum16(ICMPHeaderOUT, (DataSize + sizeof(ICMP_Header_t))); + + /* Return the size of the response so far */ + return (DataSize + sizeof(ICMP_Header_t)); + } + + return NO_RESPONSE; +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h new file mode 100644 index 000000000..594dfffb2 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h @@ -0,0 +1,83 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for ICMP.c. + */ + +#ifndef _ICMP_H_ +#define _ICMP_H_ + + /* Includes: */ + #include <avr/io.h> + #include <string.h> + + #include "EthernetProtocols.h" + #include "Ethernet.h" + #include "ProtocolDecoders.h" + + /* Macros: */ + /** ICMP message type constant, indicating an ICMP ECHO Reply message. */ + #define ICMP_TYPE_ECHOREPLY 0 + + /** ICMP message type constant, indicating a packet destination is unreachable. */ + #define ICMP_TYPE_DESTINATIONUNREACHABLE 3 + + /** ICMP message type constant, indicating an ICMP Source Quench message. */ + #define ICMP_TYPE_SOURCEQUENCH 4 + + /** ICMP message type constant, indicating an ICMP Redirect message. */ + #define ICMP_TYPE_REDIRECTMESSAGE 5 + + /** ICMP message type constant, indicating an ICMP ECHO Request message. */ + #define ICMP_TYPE_ECHOREQUEST 8 + + /** ICMP message type constant, indicating an ICMP Time Exceeded message. */ + #define ICMP_TYPE_TIMEEXCEEDED 11 + + /* Type Defines: */ + /** Type define for an ICMP message header. */ + typedef struct + { + uint8_t Type; /**< ICMP message type, an \c ICMP_TYPE_* constant */ + uint8_t Code; /**< ICMP message code, indicating the message value */ + uint16_t Checksum; /**< Ethernet checksum of the ICMP message */ + uint16_t Id; /**< Id of the ICMP message */ + uint16_t Sequence; /**< Sequence number of the ICMP message, to link together message responses */ + } ICMP_Header_t; + + /* Function Prototypes: */ + int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN, + void* InDataStart, + void* OutDataStart); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c new file mode 100644 index 000000000..05d4ebeee --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c @@ -0,0 +1,116 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Internet Protocol (IP) packet handling routines. This protocol handles IP packets from the + * host which typically encapsulate other protocols such as ICMP, UDP and TCP. + */ + +#include "IP.h" + +/** Processes an IP packet inside an Ethernet frame, and writes the appropriate response + * to the output Ethernet frame if one is created by a sub-protocol handler. + * + * \param[in] FrameIN Pointer to the incoming Ethernet frame information structure + * \param[in] InDataStart Pointer to the start of the incoming packet's IP header + * \param[out] OutDataStart Pointer to the start of the outgoing packet's IP header + * + * \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no + * response was generated, NO_PROCESS if the packet processing was deferred until the + * next Ethernet packet handler iteration + */ +int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, + void* InDataStart, + void* OutDataStart) +{ + DecodeIPHeader(InDataStart); + + IP_Header_t* IPHeaderIN = (IP_Header_t*)InDataStart; + IP_Header_t* IPHeaderOUT = (IP_Header_t*)OutDataStart; + + /* Header length is specified in number of longs in the packet header, convert to bytes */ + uint16_t HeaderLengthBytes = (IPHeaderIN->HeaderLength * sizeof(uint32_t)); + + int16_t RetSize = NO_RESPONSE; + + /* Check to ensure the IP packet is addressed to the virtual webserver's IP or the broadcast IP address */ + if (!(IP_COMPARE(&IPHeaderIN->DestinationAddress, &ServerIPAddress)) && + !(IP_COMPARE(&IPHeaderIN->DestinationAddress, &BroadcastIPAddress))) + { + return NO_RESPONSE; + } + + /* Pass off the IP payload to the appropriate protocol processing routine */ + switch (IPHeaderIN->Protocol) + { + case PROTOCOL_ICMP: + RetSize = ICMP_ProcessICMPPacket(FrameIN, + &((uint8_t*)InDataStart)[HeaderLengthBytes], + &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); + break; + case PROTOCOL_TCP: + RetSize = TCP_ProcessTCPPacket(InDataStart, + &((uint8_t*)InDataStart)[HeaderLengthBytes], + &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); + break; + case PROTOCOL_UDP: + RetSize = UDP_ProcessUDPPacket(InDataStart, + &((uint8_t*)InDataStart)[HeaderLengthBytes], + &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); + break; + } + + /* Check to see if the protocol processing routine has filled out a response */ + if (RetSize > 0) + { + /* Fill out the response IP packet header */ + IPHeaderOUT->TotalLength = SwapEndian_16(sizeof(IP_Header_t) + RetSize); + IPHeaderOUT->TypeOfService = 0; + IPHeaderOUT->HeaderLength = (sizeof(IP_Header_t) / sizeof(uint32_t)); + IPHeaderOUT->Version = 4; + IPHeaderOUT->Flags = 0; + IPHeaderOUT->FragmentOffset = 0; + IPHeaderOUT->Identification = 0; + IPHeaderOUT->HeaderChecksum = 0; + IPHeaderOUT->Protocol = IPHeaderIN->Protocol; + IPHeaderOUT->TTL = DEFAULT_TTL; + IPHeaderOUT->SourceAddress = IPHeaderIN->DestinationAddress; + IPHeaderOUT->DestinationAddress = IPHeaderIN->SourceAddress; + + IPHeaderOUT->HeaderChecksum = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t)); + + /* Return the size of the response so far */ + return (sizeof(IP_Header_t) + RetSize); + } + + return RetSize; +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h new file mode 100644 index 000000000..0dd6db8a4 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for IP.c. + */ + +#ifndef _IP_H_ +#define _IP_H_ + + /* Includes: */ + #include <avr/io.h> + #include <string.h> + + #include "EthernetProtocols.h" + #include "Ethernet.h" + #include "ProtocolDecoders.h" + #include "Config/AppConfig.h" + + /* Macros: */ + /** Protocol IP address of the broadcast address. */ + #define BROADCAST_IP_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF} + + /** Default Time To Live (TTL) value for sent packets, indicating the maximum allowable hops until their destination + * is reached. + */ + #define DEFAULT_TTL 128 + + /** Performs a comparison between two IP addresses, indicating if they are identical. + * + * \param[in] IP1 First IP address + * \param[in] IP2 Second IP address + * + * \return True if the addresses match, \c false otherwise + */ + #define IP_COMPARE(IP1, IP2) (memcmp(IP1, IP2, sizeof(IP_Address_t)) == 0) + + /* Type Defines: */ + /** Type define of an IP packet header. */ + typedef struct + { + unsigned HeaderLength : 4; /**< Total length of the packet header, in 4-byte blocks */ + unsigned Version : 4; /**< IP protocol version */ + uint8_t TypeOfService; /**< Special service type identifier, indicating delay/throughput/reliability levels */ + uint16_t TotalLength; /**< Total length of the IP packet, in bytes */ + + uint16_t Identification; /**< Identification value for identifying fragmented packets */ + unsigned FragmentOffset : 13; /**< Offset of this IP fragment */ + unsigned Flags : 3; /**< Fragment flags, to indicate if a packet is fragmented */ + + uint8_t TTL; /**< Maximum allowable number of hops to reach the packet destination */ + uint8_t Protocol; /**< Encapsulated protocol type */ + uint16_t HeaderChecksum; /**< Ethernet checksum of the IP header */ + + IP_Address_t SourceAddress; /**< Source protocol IP address of the packet */ + IP_Address_t DestinationAddress; /**< Destination protocol IP address of the packet */ + } IP_Header_t; + + /* Function Prototypes: */ + int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, + void* InDataStart, + void* OutDataStart); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c new file mode 100644 index 000000000..4c72f81b3 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c @@ -0,0 +1,277 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines + accepts a header to the appropriate protocol and prints out pertinent information + on the packet through the serial port. + + To disable printing of a specific protocol, define the token NO_DECODE_{Protocol} + in the project makefile, and pass it to the compiler using the -D switch. +*/ + +/** \file + * + * Protocol decoding routines, for the plain-text decoding of Ethernet frames for debugging purposes. + * Enabled protocol decoders will print incoming Ethernet frame contents through the USART in a human + * readable format. + * + * Note that the USART is a slow transmission medium, and will slow down packet processing considerably. + * Packet decoding routines can be disabled by defining NO_DECODE_{Protocol Name} in the project makefile + * and passing it to the compiler via the -D switch. + */ + +#include "ProtocolDecoders.h" + +/** Decodes an Ethernet frame header and prints its contents to through the USART in a human readable format. + * + * \param[in] InDataStart Pointer to the start of an Ethernet frame of data + */ +void DecodeEthernetFrameHeader(void* InDataStart) +{ + #if !defined(NO_DECODE_ETHERNET) + Ethernet_Frame_Header_t* FrameHeader = (Ethernet_Frame_Header_t*)InDataStart; + + printf_P(PSTR("\r\n")); + + printf_P(PSTR(" ETHERNET\r\n")); + + if (!(MAC_COMPARE(&FrameHeader->Destination, &ServerMACAddress)) && + !(MAC_COMPARE(&FrameHeader->Destination, &BroadcastMACAddress))) + { + printf_P(PSTR(" + NOT ADDRESSED TO DEVICE\r\n")); + return; + } + + printf_P(PSTR(" + MAC Source : %02X:%02X:%02X:%02X:%02X:%02X\r\n"), FrameHeader->Source.Octets[0], + FrameHeader->Source.Octets[1], + FrameHeader->Source.Octets[2], + FrameHeader->Source.Octets[3], + FrameHeader->Source.Octets[4], + FrameHeader->Source.Octets[5]); + + printf_P(PSTR(" + MAC Dest: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), FrameHeader->Destination.Octets[0], + FrameHeader->Destination.Octets[1], + FrameHeader->Destination.Octets[2], + FrameHeader->Destination.Octets[3], + FrameHeader->Destination.Octets[4], + FrameHeader->Destination.Octets[5]); + + printf_P(PSTR(" + Protocol: 0x%04x\r\n"), SwapEndian_16(FrameHeader->EtherType)); + #endif +} + +/** Decodes an ARP header and prints its contents to through the USART in a human readable format. + * + * \param[in] InDataStart Pointer to the start of an ARP packet header + */ +void DecodeARPHeader(void* InDataStart) +{ + #if !defined(NO_DECODE_ARP) + ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart; + + printf_P(PSTR(" \\\r\n ARP\r\n")); + + if (!(IP_COMPARE(&ARPHeader->TPA, &ServerIPAddress)) && + !(MAC_COMPARE(&ARPHeader->THA, &ServerMACAddress))) + { + printf_P(PSTR(" + NOT ADDRESSED TO DEVICE\r\n")); + return; + } + + printf_P(PSTR(" + Protocol: %x\r\n"), SwapEndian_16(ARPHeader->ProtocolType)); + printf_P(PSTR(" + Operation: %u\r\n"), SwapEndian_16(ARPHeader->Operation)); + + if (SwapEndian_16(ARPHeader->ProtocolType) == ETHERTYPE_IPV4) + { + printf_P(PSTR(" + SHA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->SHA.Octets[0], + ARPHeader->SHA.Octets[1], + ARPHeader->SHA.Octets[2], + ARPHeader->SHA.Octets[3], + ARPHeader->SHA.Octets[4], + ARPHeader->SHA.Octets[5]); + + printf_P(PSTR(" + SPA IP: %u.%u.%u.%u\r\n"), ARPHeader->SPA.Octets[0], + ARPHeader->SPA.Octets[1], + ARPHeader->SPA.Octets[2], + ARPHeader->SPA.Octets[3]); + + printf_P(PSTR(" + THA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->THA.Octets[0], + ARPHeader->THA.Octets[1], + ARPHeader->THA.Octets[2], + ARPHeader->THA.Octets[3], + ARPHeader->THA.Octets[4], + ARPHeader->THA.Octets[5]); + + printf_P(PSTR(" + TPA IP: %u.%u.%u.%u\r\n"), ARPHeader->TPA.Octets[0], + ARPHeader->TPA.Octets[1], + ARPHeader->TPA.Octets[2], + ARPHeader->TPA.Octets[3]); + } + #endif +} + +/** Decodes an IP header and prints its contents to through the USART in a human readable format. + * + * \param[in] InDataStart Pointer to the start of an IP packet header + */ +void DecodeIPHeader(void* InDataStart) +{ + #if !defined(NO_DECODE_IP) + IP_Header_t* IPHeader = (IP_Header_t*)InDataStart; + + uint16_t HeaderLengthBytes = (IPHeader->HeaderLength * sizeof(uint32_t)); + + printf_P(PSTR(" \\\r\n IP\r\n")); + + if (!(IP_COMPARE(&IPHeader->DestinationAddress, &ServerIPAddress))) + { + printf_P(PSTR(" + NOT ADDRESSED TO DEVICE\r\n")); + return; + } + + printf_P(PSTR(" + Header Length: %u Bytes\r\n"), HeaderLengthBytes); + printf_P(PSTR(" + Packet Version: %u\r\n"), IPHeader->Version); + printf_P(PSTR(" + Total Length: %u\r\n"), SwapEndian_16(IPHeader->TotalLength)); + + printf_P(PSTR(" + Protocol: %u\r\n"), IPHeader->Protocol); + printf_P(PSTR(" + TTL: %u\r\n"), IPHeader->TTL); + + printf_P(PSTR(" + IP Src: %u.%u.%u.%u\r\n"), IPHeader->SourceAddress.Octets[0], + IPHeader->SourceAddress.Octets[1], + IPHeader->SourceAddress.Octets[2], + IPHeader->SourceAddress.Octets[3]); + + printf_P(PSTR(" + IP Dst: %u.%u.%u.%u\r\n"), IPHeader->DestinationAddress.Octets[0], + IPHeader->DestinationAddress.Octets[1], + IPHeader->DestinationAddress.Octets[2], + IPHeader->DestinationAddress.Octets[3]); + #endif +} + +/** Decodes an ICMP header and prints its contents to through the USART in a human readable format. + * + * \param[in] InDataStart Pointer to the start of an ICMP packet header + */ +void DecodeICMPHeader(void* InDataStart) +{ + #if !defined(NO_DECODE_ICMP) + ICMP_Header_t* ICMPHeader = (ICMP_Header_t*)InDataStart; + + printf_P(PSTR(" \\\r\n ICMP\r\n")); + + printf_P(PSTR(" + Type: %u\r\n"), ICMPHeader->Type); + printf_P(PSTR(" + Code: %u\r\n"), ICMPHeader->Code); + #endif +} + +/** Decodes a TCP header and prints its contents to through the USART in a human readable format. + * + * \param[in] InDataStart Pointer to the start of a TCP packet header + */ +void DecodeTCPHeader(void* InDataStart) +{ + #if !defined(NO_DECODE_TCP) + TCP_Header_t* TCPHeader = (TCP_Header_t*)InDataStart; + + uint16_t HeaderLengthBytes = (TCPHeader->DataOffset * sizeof(uint32_t)); + + printf_P(PSTR(" \\\r\n TCP\r\n")); + + printf_P(PSTR(" + Header Length: %u Bytes\r\n"), HeaderLengthBytes); + + printf_P(PSTR(" + Source Port: %u\r\n"), SwapEndian_16(TCPHeader->SourcePort)); + printf_P(PSTR(" + Destination Port: %u\r\n"), SwapEndian_16(TCPHeader->DestinationPort)); + + printf_P(PSTR(" + Sequence Number: %lu\r\n"), SwapEndian_32(TCPHeader->SequenceNumber)); + printf_P(PSTR(" + Acknowledgment Number: %lu\r\n"), SwapEndian_32(TCPHeader->AcknowledgmentNumber)); + + printf_P(PSTR(" + Flags: 0x%02X\r\n"), TCPHeader->Flags); + + if (TCP_GetPortState(TCPHeader->DestinationPort) == TCP_Port_Closed) + printf_P(PSTR(" + NOT LISTENING ON DESTINATION PORT\r\n")); + #endif +} + +/** Decodes an UDP header and prints its contents to through the USART in a human readable format. + * + * \param[in] InDataStart Pointer to the start of a UDP packet header + */ +void DecodeUDPHeader(void* InDataStart) +{ + #if !defined(NO_DECODE_UDP) + UDP_Header_t* UDPHeader = (UDP_Header_t*)InDataStart; + + printf_P(PSTR(" \\\r\n UDP\r\n")); + + printf_P(PSTR(" + Source Port: %u\r\n"), SwapEndian_16(UDPHeader->SourcePort)); + printf_P(PSTR(" + Destination Port: %u\r\n"), SwapEndian_16(UDPHeader->DestinationPort)); + + printf_P(PSTR(" + Data Length: %d\r\n"), SwapEndian_16(UDPHeader->Length)); + #endif +} + +/** Decodes an DHCP header and prints its contents to through the USART in a human readable format. + * + * \param[in] InDataStart Pointer to the start of a DHCP packet header + */ +void DecodeDHCPHeader(void* InDataStart) +{ + #if !defined(NO_DECODE_DHCP) + uint8_t* DHCPOptions = ((uint8_t*)InDataStart + sizeof(DHCP_Header_t)); + + printf_P(PSTR(" \\\r\n DHCP\r\n")); + + while (DHCPOptions[0] != DHCP_OPTION_END) + { + if (DHCPOptions[0] == DHCP_OPTION_MESSAGETYPE) + { + switch (DHCPOptions[2]) + { + case DHCP_MESSAGETYPE_DISCOVER: + printf_P(PSTR(" + DISCOVER\r\n")); + break; + case DHCP_MESSAGETYPE_REQUEST: + printf_P(PSTR(" + REQUEST\r\n")); + break; + case DHCP_MESSAGETYPE_RELEASE: + printf_P(PSTR(" + RELEASE\r\n")); + break; + case DHCP_MESSAGETYPE_DECLINE: + printf_P(PSTR(" + DECLINE\r\n")); + break; + } + } + + DHCPOptions += ((DHCPOptions[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptions[1] + 2)); + } + + #endif +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h new file mode 100644 index 000000000..77a50f02f --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h @@ -0,0 +1,60 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for ProtocolDecoders.c. + */ + +#ifndef _PROTOCOL_DECODERS_H_ +#define _PROTOCOL_DECODERS_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/pgmspace.h> + #include <stdio.h> + + #include <LUFA/Drivers/Peripheral/Serial.h> + + #include "EthernetProtocols.h" + #include "Ethernet.h" + #include "Config/AppConfig.h" + + /* Function Prototypes: */ + void DecodeEthernetFrameHeader(void* InDataStart); + void DecodeARPHeader(void* InDataStart); + void DecodeIPHeader(void* InDataStart); + void DecodeICMPHeader(void* InDataStart); + void DecodeTCPHeader(void* InDataStart); + void DecodeUDPHeader(void* InDataStart); + void DecodeDHCPHeader(void* InDataStart); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c new file mode 100644 index 000000000..dcc527aa9 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c @@ -0,0 +1,632 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Transmission Control Protocol (TCP) packet handling routines. This protocol handles the reliable in-order transmission + * and reception of packets to and from devices on a network, to "ports" on the device. It is used in situations where data + * delivery must be reliable and correct, e.g. HTTP, TELNET and most other non-streaming protocols. + */ + +#define INCLUDE_FROM_TCP_C +#include "TCP.h" + +/** Port state table array. This contains the current status of TCP ports in the device. To save on space, only open ports are + * stored - closed ports may be overwritten at any time, and the system will assume any ports not present in the array are closed. This + * allows for MAX_OPEN_TCP_PORTS to be less than the number of ports used by the application if desired. + */ +TCP_PortState_t PortStateTable[MAX_OPEN_TCP_PORTS]; + +/** Connection state table array. This contains the current status of TCP connections in the device. To save on space, only active + * (non-closed) connections are stored - closed connections may be overwritten at any time, and the system will assume any connections + * not present in the array are closed. + */ +TCP_ConnectionState_t ConnectionStateTable[MAX_TCP_CONNECTIONS]; + + +/** Task to handle the calling of each registered application's callback function, to process and generate TCP packets at the application + * level. If an application produces a response, this task constructs the appropriate Ethernet frame and places it into the Ethernet OUT + * buffer for later transmission. + */ +void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo, + Ethernet_Frame_Info_t* const FrameOUT) +{ + /* Run each application in sequence, to process incoming and generate outgoing packets */ + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) + { + /* Find the corresponding port entry in the port table */ + for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++) + { + /* Run the application handler for the port */ + if ((PortStateTable[PTableEntry].Port == ConnectionStateTable[CSTableEntry].Port) && + (PortStateTable[PTableEntry].State == TCP_Port_Open)) + { + PortStateTable[PTableEntry].ApplicationHandler(&ConnectionStateTable[CSTableEntry], + &ConnectionStateTable[CSTableEntry].Info.Buffer); + } + } + } + + /* Bail out early if there is already a frame waiting to be sent in the Ethernet OUT buffer */ + if (FrameOUT->FrameLength) + return; + + /* Send response packets from each application as the TCP packet buffers are filled by the applications */ + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) + { + /* For each completely received packet, pass it along to the listening application */ + if ((ConnectionStateTable[CSTableEntry].Info.Buffer.Direction == TCP_PACKETDIR_OUT) && + (ConnectionStateTable[CSTableEntry].Info.Buffer.Ready)) + { + Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT->FrameData; + IP_Header_t* IPHeaderOUT = (IP_Header_t*)&FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]; + TCP_Header_t* TCPHeaderOUT = (TCP_Header_t*)&FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t) + + sizeof(IP_Header_t)]; + void* TCPDataOUT = &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t) + + sizeof(IP_Header_t) + + sizeof(TCP_Header_t)]; + + uint16_t PacketSize = ConnectionStateTable[CSTableEntry].Info.Buffer.Length; + + /* Fill out the TCP data */ + TCPHeaderOUT->SourcePort = ConnectionStateTable[CSTableEntry].Port; + TCPHeaderOUT->DestinationPort = ConnectionStateTable[CSTableEntry].RemotePort; + TCPHeaderOUT->SequenceNumber = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut); + TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberIn); + TCPHeaderOUT->DataOffset = (sizeof(TCP_Header_t) / sizeof(uint32_t)); + TCPHeaderOUT->WindowSize = SwapEndian_16(TCP_WINDOW_SIZE); + + TCPHeaderOUT->Flags = TCP_FLAG_ACK; + TCPHeaderOUT->UrgentPointer = 0; + TCPHeaderOUT->Checksum = 0; + TCPHeaderOUT->Reserved = 0; + + memcpy(TCPDataOUT, ConnectionStateTable[CSTableEntry].Info.Buffer.Data, PacketSize); + + ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut += PacketSize; + + TCPHeaderOUT->Checksum = TCP_Checksum16(TCPHeaderOUT, &ServerIPAddress, + &ConnectionStateTable[CSTableEntry].RemoteAddress, + (sizeof(TCP_Header_t) + PacketSize)); + + PacketSize += sizeof(TCP_Header_t); + + /* Fill out the response IP header */ + IPHeaderOUT->TotalLength = SwapEndian_16(sizeof(IP_Header_t) + PacketSize); + IPHeaderOUT->TypeOfService = 0; + IPHeaderOUT->HeaderLength = (sizeof(IP_Header_t) / sizeof(uint32_t)); + IPHeaderOUT->Version = 4; + IPHeaderOUT->Flags = 0; + IPHeaderOUT->FragmentOffset = 0; + IPHeaderOUT->Identification = 0; + IPHeaderOUT->HeaderChecksum = 0; + IPHeaderOUT->Protocol = PROTOCOL_TCP; + IPHeaderOUT->TTL = DEFAULT_TTL; + IPHeaderOUT->SourceAddress = ServerIPAddress; + IPHeaderOUT->DestinationAddress = ConnectionStateTable[CSTableEntry].RemoteAddress; + + IPHeaderOUT->HeaderChecksum = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t)); + + PacketSize += sizeof(IP_Header_t); + + /* Fill out the response Ethernet frame header */ + FrameOUTHeader->Source = ServerMACAddress; + FrameOUTHeader->Destination = (MAC_Address_t){{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}}; + FrameOUTHeader->EtherType = SwapEndian_16(ETHERTYPE_IPV4); + + PacketSize += sizeof(Ethernet_Frame_Header_t); + + /* Set the response length in the buffer and indicate that a response is ready to be sent */ + FrameOUT->FrameLength = PacketSize; + + ConnectionStateTable[CSTableEntry].Info.Buffer.Ready = false; + + break; + } + } +} + +/** Initializes the TCP protocol handler, clearing the port and connection state tables. This must be called before TCP packets are + * processed. + */ +void TCP_Init(void) +{ + /* Initialize the port state table with all CLOSED entries */ + for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++) + PortStateTable[PTableEntry].State = TCP_Port_Closed; + + /* Initialize the connection table with all CLOSED entries */ + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) + ConnectionStateTable[CSTableEntry].State = TCP_Connection_Closed; +} + +/** Sets the state and callback handler of the given port, specified in big endian to the given state. + * + * \param[in] Port Port whose state and callback function to set, specified in big endian + * \param[in] State New state of the port, a value from the \ref TCP_PortStates_t enum + * \param[in] Handler Application callback handler for the port + * + * \return Boolean \c true if the port state was set, \c false otherwise (no more space in the port state table) + */ +bool TCP_SetPortState(const uint16_t Port, + const uint8_t State, + void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*)) +{ + /* Note, Port number should be specified in BIG endian to simplify network code */ + + /* Check to see if the port entry is already in the port state table */ + for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++) + { + /* Find existing entry for the port in the table, update it if found */ + if (PortStateTable[PTableEntry].Port == Port) + { + PortStateTable[PTableEntry].State = State; + PortStateTable[PTableEntry].ApplicationHandler = Handler; + return true; + } + } + + /* Check if trying to open the port -- if so we need to find an unused (closed) entry and replace it */ + if (State == TCP_Port_Open) + { + for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++) + { + /* Find a closed port entry in the table, change it to the given port and state */ + if (PortStateTable[PTableEntry].State == TCP_Port_Closed) + { + PortStateTable[PTableEntry].Port = Port; + PortStateTable[PTableEntry].State = State; + PortStateTable[PTableEntry].ApplicationHandler = Handler; + return true; + } + } + + /* Port not in table and no room to add it, return failure */ + return false; + } + else + { + /* Port not in table but trying to close it, so operation successful */ + return true; + } +} + +/** Retrieves the current state of a given TCP port, specified in big endian. + * + * \param[in] Port TCP port whose state is to be retrieved, given in big-endian + * + * \return A value from the \ref TCP_PortStates_t enum + */ +uint8_t TCP_GetPortState(const uint16_t Port) +{ + /* Note, Port number should be specified in BIG endian to simplify network code */ + + for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++) + { + /* Find existing entry for the port in the table, return the port status if found */ + if (PortStateTable[PTableEntry].Port == Port) + return PortStateTable[PTableEntry].State; + } + + /* Port not in table, assume closed */ + return TCP_Port_Closed; +} + +/** Sets the connection state of the given port, remote address and remote port to the given TCP connection state. If the + * connection exists in the connection state table it is updated, otherwise it is created if possible. + * + * \param[in] Port TCP port of the connection on the device, specified in big endian + * \param[in] RemoteAddress Remote protocol IP address of the connected device + * \param[in] RemotePort TCP port of the remote device in the connection, specified in big endian + * \param[in] State TCP connection state, a value from the \ref TCP_ConnectionStates_t enum + * + * \return Boolean \c true if the connection was updated or created, \c false otherwise (no more space in the connection state table) + */ +bool TCP_SetConnectionState(const uint16_t Port, + const IP_Address_t* RemoteAddress, + const uint16_t RemotePort, + const uint8_t State) +{ + /* Note, Port number should be specified in BIG endian to simplify network code */ + + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) + { + /* Find port entry in the table */ + if ((ConnectionStateTable[CSTableEntry].Port == Port) && + IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) && + ConnectionStateTable[CSTableEntry].RemotePort == RemotePort) + { + ConnectionStateTable[CSTableEntry].State = State; + return true; + } + } + + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) + { + /* Find empty entry in the table */ + if (ConnectionStateTable[CSTableEntry].State == TCP_Connection_Closed) + { + ConnectionStateTable[CSTableEntry].Port = Port; + ConnectionStateTable[CSTableEntry].RemoteAddress = *RemoteAddress; + ConnectionStateTable[CSTableEntry].RemotePort = RemotePort; + ConnectionStateTable[CSTableEntry].State = State; + return true; + } + } + + return false; +} + +/** Retrieves the current state of a given TCP connection to a host. + * + * \param[in] Port TCP port on the device in the connection, specified in big endian + * \param[in] RemoteAddress Remote protocol IP address of the connected host + * \param[in] RemotePort Remote TCP port of the connected host, specified in big endian + * + * \return A value from the \ref TCP_ConnectionStates_t enum + */ +uint8_t TCP_GetConnectionState(const uint16_t Port, + const IP_Address_t* RemoteAddress, + const uint16_t RemotePort) +{ + /* Note, Port number should be specified in BIG endian to simplify network code */ + + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) + { + /* Find port entry in the table */ + if ((ConnectionStateTable[CSTableEntry].Port == Port) && + IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) && + ConnectionStateTable[CSTableEntry].RemotePort == RemotePort) + + { + return ConnectionStateTable[CSTableEntry].State; + } + } + + return TCP_Connection_Closed; +} + +/** Retrieves the connection info structure of a given connection to a host. + * + * \param[in] Port TCP port on the device in the connection, specified in big endian + * \param[in] RemoteAddress Remote protocol IP address of the connected host + * \param[in] RemotePort Remote TCP port of the connected host, specified in big endian + * + * \return ConnectionInfo structure of the connection if found, NULL otherwise + */ +TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port, + const IP_Address_t* RemoteAddress, + const uint16_t RemotePort) +{ + /* Note, Port number should be specified in BIG endian to simplify network code */ + + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) + { + /* Find port entry in the table */ + if ((ConnectionStateTable[CSTableEntry].Port == Port) && + IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) && + ConnectionStateTable[CSTableEntry].RemotePort == RemotePort) + { + return &ConnectionStateTable[CSTableEntry].Info; + } + } + + return NULL; +} + +/** Processes a TCP packet inside an Ethernet frame, and writes the appropriate response + * to the output Ethernet frame if one is created by a application handler. + * + * \param[in] IPHeaderInStart Pointer to the start of the incoming packet's IP header + * \param[in] TCPHeaderInStart Pointer to the start of the incoming packet's TCP header + * \param[out] TCPHeaderOutStart Pointer to the start of the outgoing packet's TCP header + * + * \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no + * response was generated, NO_PROCESS if the packet processing was deferred until the + * next Ethernet packet handler iteration + */ +int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, + void* TCPHeaderInStart, + void* TCPHeaderOutStart) +{ + IP_Header_t* IPHeaderIN = (IP_Header_t*)IPHeaderInStart; + TCP_Header_t* TCPHeaderIN = (TCP_Header_t*)TCPHeaderInStart; + TCP_Header_t* TCPHeaderOUT = (TCP_Header_t*)TCPHeaderOutStart; + + TCP_ConnectionInfo_t* ConnectionInfo; + + DecodeTCPHeader(TCPHeaderInStart); + + bool PacketResponse = false; + + /* Check if the destination port is open and allows incoming connections */ + if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open) + { + /* Detect SYN from host to start a connection */ + if (TCPHeaderIN->Flags & TCP_FLAG_SYN) + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Listen); + + /* Detect RST from host to abort existing connection */ + if (TCPHeaderIN->Flags & TCP_FLAG_RST) + { + if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort, TCP_Connection_Closed)) + { + TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); + PacketResponse = true; + } + } + else + { + /* Process the incoming TCP packet based on the current connection state for the sender and port */ + switch (TCP_GetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort)) + { + case TCP_Connection_Listen: + if (TCPHeaderIN->Flags == TCP_FLAG_SYN) + { + /* SYN connection starts a connection with a peer */ + if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort, TCP_Connection_SYNReceived)) + { + TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK); + + ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); + + ConnectionInfo->SequenceNumberIn = (SwapEndian_32(TCPHeaderIN->SequenceNumber) + 1); + ConnectionInfo->SequenceNumberOut = 0; + ConnectionInfo->Buffer.InUse = false; + } + else + { + TCPHeaderOUT->Flags = TCP_FLAG_RST; + } + + PacketResponse = true; + } + + break; + case TCP_Connection_SYNReceived: + if (TCPHeaderIN->Flags == TCP_FLAG_ACK) + { + /* ACK during the connection process completes the connection to a peer */ + + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort, TCP_Connection_Established); + + ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort); + + ConnectionInfo->SequenceNumberOut++; + } + + break; + case TCP_Connection_Established: + if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK)) + { + /* FIN ACK when connected to a peer starts the finalization process */ + + TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK); + PacketResponse = true; + + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort, TCP_Connection_CloseWait); + + ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort); + + ConnectionInfo->SequenceNumberIn++; + ConnectionInfo->SequenceNumberOut++; + } + else if ((TCPHeaderIN->Flags == TCP_FLAG_ACK) || (TCPHeaderIN->Flags == (TCP_FLAG_ACK | TCP_FLAG_PSH))) + { + ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort); + + /* Check if the buffer is currently in use either by a buffered data to send, or receive */ + if ((ConnectionInfo->Buffer.InUse == false) && (ConnectionInfo->Buffer.Ready == false)) + { + ConnectionInfo->Buffer.Direction = TCP_PACKETDIR_IN; + ConnectionInfo->Buffer.InUse = true; + ConnectionInfo->Buffer.Length = 0; + } + + /* Check if the buffer has been claimed by us to read in data from the peer */ + if ((ConnectionInfo->Buffer.Direction == TCP_PACKETDIR_IN) && + (ConnectionInfo->Buffer.Length != TCP_WINDOW_SIZE)) + { + uint16_t IPOffset = (IPHeaderIN->HeaderLength * sizeof(uint32_t)); + uint16_t TCPOffset = (TCPHeaderIN->DataOffset * sizeof(uint32_t)); + uint16_t DataLength = (SwapEndian_16(IPHeaderIN->TotalLength) - IPOffset - TCPOffset); + + /* Copy the packet data into the buffer */ + memcpy(&ConnectionInfo->Buffer.Data[ConnectionInfo->Buffer.Length], + &((uint8_t*)TCPHeaderInStart)[TCPOffset], + DataLength); + + ConnectionInfo->SequenceNumberIn += DataLength; + ConnectionInfo->Buffer.Length += DataLength; + + /* Check if the buffer is full or if the PSH flag is set, if so indicate buffer ready */ + if ((!(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length)) || (TCPHeaderIN->Flags & TCP_FLAG_PSH)) + { + ConnectionInfo->Buffer.InUse = false; + ConnectionInfo->Buffer.Ready = true; + + TCPHeaderOUT->Flags = TCP_FLAG_ACK; + PacketResponse = true; + } + } + else + { + /* Buffer is currently in use by the application, defer processing of the incoming packet */ + return NO_PROCESS; + } + } + + break; + case TCP_Connection_Closing: + ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort); + + TCPHeaderOUT->Flags = (TCP_FLAG_ACK | TCP_FLAG_FIN); + PacketResponse = true; + + ConnectionInfo->Buffer.InUse = false; + + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort, TCP_Connection_FINWait1); + + break; + case TCP_Connection_FINWait1: + if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK)) + { + ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort); + + TCPHeaderOUT->Flags = TCP_FLAG_ACK; + PacketResponse = true; + + ConnectionInfo->SequenceNumberIn++; + ConnectionInfo->SequenceNumberOut++; + + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort, TCP_Connection_Closed); + } + else if (TCPHeaderIN->Flags == TCP_FLAG_ACK) + { + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort, TCP_Connection_FINWait2); + } + + break; + case TCP_Connection_FINWait2: + if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK)) + { + ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort); + + TCPHeaderOUT->Flags = TCP_FLAG_ACK; + PacketResponse = true; + + ConnectionInfo->SequenceNumberIn++; + ConnectionInfo->SequenceNumberOut++; + + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort, TCP_Connection_Closed); + } + + break; + case TCP_Connection_CloseWait: + if (TCPHeaderIN->Flags == TCP_FLAG_ACK) + { + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort, TCP_Connection_Closed); + } + + break; + } + } + } + else + { + /* Port is not open, indicate via a RST/ACK response to the sender */ + TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); + PacketResponse = true; + } + + /* Check if we need to respond to the sent packet */ + if (PacketResponse) + { + ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, + TCPHeaderIN->SourcePort); + + TCPHeaderOUT->SourcePort = TCPHeaderIN->DestinationPort; + TCPHeaderOUT->DestinationPort = TCPHeaderIN->SourcePort; + TCPHeaderOUT->SequenceNumber = SwapEndian_32(ConnectionInfo->SequenceNumberOut); + TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionInfo->SequenceNumberIn); + TCPHeaderOUT->DataOffset = (sizeof(TCP_Header_t) / sizeof(uint32_t)); + + if (!(ConnectionInfo->Buffer.InUse)) + TCPHeaderOUT->WindowSize = SwapEndian_16(TCP_WINDOW_SIZE); + else + TCPHeaderOUT->WindowSize = SwapEndian_16(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length); + + TCPHeaderOUT->UrgentPointer = 0; + TCPHeaderOUT->Checksum = 0; + TCPHeaderOUT->Reserved = 0; + + TCPHeaderOUT->Checksum = TCP_Checksum16(TCPHeaderOUT, &IPHeaderIN->DestinationAddress, + &IPHeaderIN->SourceAddress, sizeof(TCP_Header_t)); + + return sizeof(TCP_Header_t); + } + + return NO_RESPONSE; +} + +/** Calculates the appropriate TCP checksum, consisting of the addition of the one's compliment of each word, + * complimented. + * + * \param[in] TCPHeaderOutStart Pointer to the start of the packet's outgoing TCP header + * \param[in] SourceAddress Source protocol IP address of the outgoing IP header + * \param[in] DestinationAddress Destination protocol IP address of the outgoing IP header + * \param[in] TCPOutSize Size in bytes of the TCP data header and payload + * + * \return A 16-bit TCP checksum value + */ +static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, + const IP_Address_t* SourceAddress, + const IP_Address_t* DestinationAddress, + uint16_t TCPOutSize) +{ + uint32_t Checksum = 0; + + /* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header, + complimented */ + + Checksum += ((uint16_t*)SourceAddress)[0]; + Checksum += ((uint16_t*)SourceAddress)[1]; + Checksum += ((uint16_t*)DestinationAddress)[0]; + Checksum += ((uint16_t*)DestinationAddress)[1]; + Checksum += SwapEndian_16(PROTOCOL_TCP); + Checksum += SwapEndian_16(TCPOutSize); + + for (uint16_t CurrWord = 0; CurrWord < (TCPOutSize >> 1); CurrWord++) + Checksum += ((uint16_t*)TCPHeaderOutStart)[CurrWord]; + + if (TCPOutSize & 0x01) + Checksum += (((uint16_t*)TCPHeaderOutStart)[TCPOutSize >> 1] & 0x00FF); + + while (Checksum & 0xFFFF0000) + Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16)); + + return ~Checksum; +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h new file mode 100644 index 000000000..b8eb4cfa1 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h @@ -0,0 +1,260 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for TCP.c. + */ + +#ifndef _TCP_H_ +#define _TCP_H_ + + /* Includes: */ + #include <avr/io.h> + #include <stdbool.h> + + #include "EthernetProtocols.h" + #include "Ethernet.h" + #include "ProtocolDecoders.h" + + /* Macros: */ + /** Maximum number of TCP ports which can be open at the one time. */ + #define MAX_OPEN_TCP_PORTS 1 + + /** Maximum number of TCP connections which can be sustained at the one time. */ + #define MAX_TCP_CONNECTIONS 3 + + /** TCP window size, giving the maximum number of bytes which can be buffered at the one time. */ + #define TCP_WINDOW_SIZE 512 + + /** Port number for HTTP transmissions. */ + #define TCP_PORT_HTTP SwapEndian_16(80) + + /** Data direction indicator for a TCP application buffer, indicating data from host-to-device. */ + #define TCP_PACKETDIR_IN false + + /** Data direction indicator for a TCP application buffer, indicating data from device-to-host. */ + #define TCP_PACKETDIR_OUT true + + /** Congestion Window Reduced TCP flag mask. */ + #define TCP_FLAG_CWR (1 << 7) + + /** Explicit Congestion Notification TCP flag mask. */ + #define TCP_FLAG_ECE (1 << 6) + + /** Urgent TCP flag mask. */ + #define TCP_FLAG_URG (1 << 5) + + /** Data Acknowledge TCP flag mask. */ + #define TCP_FLAG_ACK (1 << 4) + + /** Data Push TCP flag mask. */ + #define TCP_FLAG_PSH (1 << 3) + + /** Reset TCP flag mask. */ + #define TCP_FLAG_RST (1 << 2) + + /** Synchronize TCP flag mask. */ + #define TCP_FLAG_SYN (1 << 1) + + /** Connection Finalize TCP flag mask. */ + #define TCP_FLAG_FIN (1 << 0) + + /** Application macro: Determines if the given application buffer contains a packet received from the host + * + * \param[in] Buffer Application buffer to check + * + * \return Boolean \c true if the buffer contains a packet from the host, \c false otherwise + */ + #define TCP_APP_HAS_RECEIVED_PACKET(Buffer) (Buffer->Ready && (Buffer->Direction == TCP_PACKETDIR_IN)) + + /** Application macro: Indicates if the application buffer is currently locked by the application for device-to-host transfers. + * + * \param[in] Buffer Application buffer to check + * + * \return Boolean \c true if the buffer has been captured by the application for device-to-host transmissions, \c false otherwise + */ + #define TCP_APP_HAVE_CAPTURED_BUFFER(Buffer) (!(Buffer->Ready) && Buffer->InUse && (Buffer->Direction == TCP_PACKETDIR_OUT)) + + /** Application macro: Indicates if the application can lock the buffer for multiple continued device-to-host transmissions. + * + * \param[in] Buffer Application buffer to check + * + * \return Boolean \c true if the buffer may be captured by the application for device-to-host transmissions, \c false otherwise + */ + #define TCP_APP_CAN_CAPTURE_BUFFER(Buffer) Buffer->InUse + + /** Application macro: Captures the application buffer, locking it for device-to-host transmissions only. This should be + * performed when the application needs to transmit several packets worth of data in succession with no interruptions from the host. + * + * \pre The application must check that the buffer can be locked first using TCP_APP_CAN_CAPTURE_BUFFER(). + * + * \param[in] Buffer Application buffer to lock + */ + #define TCP_APP_CAPTURE_BUFFER(Buffer) do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->InUse = true; } while (0) + + /** Application macro: Releases a captured application buffer, allowing for host-to-device packets to be received. + * + * \param[in] Buffer Application buffer to release + */ + #define TCP_APP_RELEASE_BUFFER(Buffer) do { Buffer->InUse = false; } while (0) + + /** Application macro: Sends the contents of the given application buffer to the host. + * + * \param[in] Buffer Application buffer to send + * \param[in] Len Length of data contained in the buffer + */ + #define TCP_APP_SEND_BUFFER(Buffer, Len) do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->Length = Len; Buffer->Ready = true; } while (0) + + /** Application macro: Clears the application buffer, ready for a packet to be written to it. + * + * \param[in] Buffer Application buffer to clear + */ + #define TCP_APP_CLEAR_BUFFER(Buffer) do { Buffer->Ready = false; Buffer->Length = 0; } while (0) + + /** Application macro: Closes an open connection to a host. + * + * \param[in] Connection Open TCP connection to close + */ + #define TCP_APP_CLOSECONNECTION(Connection) do { Connection->State = TCP_Connection_Closing; } while (0) + + /* Enums: */ + /** Enum for possible TCP port states. */ + enum TCP_PortStates_t + { + TCP_Port_Closed = 0, /**< TCP port closed, no connections to a host may be made on this port. */ + TCP_Port_Open = 1, /**< TCP port open, connections to a host may be made on this port. */ + }; + + /** Enum for possible TCP connection states. */ + enum TCP_ConnectionStates_t + { + TCP_Connection_Listen = 0, /**< Listening for a connection from a host */ + TCP_Connection_SYNSent = 1, /**< Unused */ + TCP_Connection_SYNReceived = 2, /**< SYN received, waiting for ACK */ + TCP_Connection_Established = 3, /**< Connection established in both directions */ + TCP_Connection_FINWait1 = 4, /**< Closing, waiting for ACK */ + TCP_Connection_FINWait2 = 5, /**< Closing, waiting for FIN ACK */ + TCP_Connection_CloseWait = 6, /**< Closing, waiting for ACK */ + TCP_Connection_Closing = 7, /**< Unused */ + TCP_Connection_LastACK = 8, /**< Unused */ + TCP_Connection_TimeWait = 9, /**< Unused */ + TCP_Connection_Closed = 10, /**< Connection closed in both directions */ + }; + + /* Type Defines: */ + /** Type define for a TCP connection buffer structure, including size, data and direction. */ + typedef struct + { + uint16_t Length; /**< Length of data in the TCP application buffer */ + uint8_t Data[TCP_WINDOW_SIZE]; /**< TCP application data buffer */ + bool Direction; /**< Buffer transmission direction, either TCP_PACKETDIR_IN or TCP_PACKETDIR_OUT */ + bool Ready; /**< If data from host, indicates buffer ready to be read, otherwise indicates + * buffer ready to be sent to the host + */ + bool InUse; /**< Indicates if the buffer is locked to to the current direction, and cannot be changed */ + } TCP_ConnectionBuffer_t; + + /** Type define for a TCP connection information structure. */ + typedef struct + { + uint32_t SequenceNumberIn; /**< Current TCP sequence number for host-to-device */ + uint32_t SequenceNumberOut; /**< Current TCP sequence number for device-to-host */ + TCP_ConnectionBuffer_t Buffer; /**< Connection application data buffer */ + } TCP_ConnectionInfo_t; + + /** Type define for a complete TCP connection state. */ + typedef struct + { + uint16_t Port; /**< Connection port number on the device */ + uint16_t RemotePort; /**< Connection port number on the host */ + IP_Address_t RemoteAddress; /**< Connection protocol IP address of the host */ + TCP_ConnectionInfo_t Info; /**< Connection information, including application buffer */ + uint8_t State; /**< Current connection state, a value from the \ref TCP_ConnectionStates_t enum */ + } TCP_ConnectionState_t; + + /** Type define for a TCP port state. */ + typedef struct + { + uint16_t Port; /**< TCP port number on the device */ + uint8_t State; /**< Current port state, a value from the \ref TCP_PortStates_t enum */ + void (*ApplicationHandler) (TCP_ConnectionState_t* ConnectionState, + TCP_ConnectionBuffer_t* Buffer); /**< Port application handler */ + } TCP_PortState_t; + + /** Type define for a TCP packet header. */ + typedef struct + { + uint16_t SourcePort; /**< Source port of the TCP packet */ + uint16_t DestinationPort; /**< Destination port of the TCP packet */ + + uint32_t SequenceNumber; /**< Data sequence number of the packet */ + uint32_t AcknowledgmentNumber; /**< Data acknowledgment number of the packet */ + + unsigned Reserved : 4; /**< Reserved, must be all 0 */ + unsigned DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */ + uint8_t Flags; /**< TCP packet flags */ + uint16_t WindowSize; /**< Current data window size (bytes remaining in reception buffer) */ + + uint16_t Checksum; /**< TCP checksum */ + uint16_t UrgentPointer; /**< Urgent data pointer */ + } TCP_Header_t; + + /* Function Prototypes: */ + void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo, + Ethernet_Frame_Info_t* const FrameOUT); + void TCP_Init(void); + bool TCP_SetPortState(const uint16_t Port, + const uint8_t State, + void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*)); + uint8_t TCP_GetPortState(const uint16_t Port); + bool TCP_SetConnectionState(const uint16_t Port, + const IP_Address_t* RemoteAddress, + const uint16_t RemotePort, + const uint8_t State); + uint8_t TCP_GetConnectionState(const uint16_t Port, + const IP_Address_t* RemoteAddress, + const uint16_t RemotePort); + TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port, + const IP_Address_t* RemoteAddress, + const uint16_t RemotePort); + int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, + void* TCPHeaderInStart, + void* TCPHeaderOutStart); + + #if defined(INCLUDE_FROM_TCP_C) + static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, + const IP_Address_t* SourceAddress, + const IP_Address_t* DestinationAddress, + uint16_t TCPOutSize); + #endif + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c new file mode 100644 index 000000000..03c19e00e --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c @@ -0,0 +1,84 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * User Datagram Protocol (UDP) packet handling routines. This protocol handles high throughput, low + * reliability packets which are typically used to encapsulate streaming data. + */ + +#define INCLUDE_FROM_UDP_C +#include "UDP.h" + +/** Processes a UDP packet inside an Ethernet frame, and writes the appropriate response + * to the output Ethernet frame if a sub-protocol handler has created a response packet. + * + * \param[in] IPHeaderInStart Pointer to the start of the incoming packet's IP header + * \param[in] UDPHeaderInStart Pointer to the start of the incoming packet's UDP header + * \param[out] UDPHeaderOutStart Pointer to the start of the outgoing packet's UDP header + * + * \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise + */ +int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, + void* UDPHeaderInStart, + void* UDPHeaderOutStart) +{ + UDP_Header_t* UDPHeaderIN = (UDP_Header_t*)UDPHeaderInStart; + UDP_Header_t* UDPHeaderOUT = (UDP_Header_t*)UDPHeaderOutStart; + + int16_t RetSize = NO_RESPONSE; + + DecodeUDPHeader(UDPHeaderInStart); + + switch (SwapEndian_16(UDPHeaderIN->DestinationPort)) + { + case UDP_PORT_DHCP_REQUEST: + RetSize = DHCP_ProcessDHCPPacket(IPHeaderInStart, + &((uint8_t*)UDPHeaderInStart)[sizeof(UDP_Header_t)], + &((uint8_t*)UDPHeaderOutStart)[sizeof(UDP_Header_t)]); + break; + } + + /* Check to see if the protocol processing routine has filled out a response */ + if (RetSize > 0) + { + /* Fill out the response UDP packet header */ + UDPHeaderOUT->SourcePort = UDPHeaderIN->DestinationPort; + UDPHeaderOUT->DestinationPort = UDPHeaderIN->SourcePort; + UDPHeaderOUT->Checksum = 0; + UDPHeaderOUT->Length = SwapEndian_16(sizeof(UDP_Header_t) + RetSize); + + /* Return the size of the response so far */ + return (sizeof(UDP_Header_t) + RetSize); + } + + return NO_RESPONSE; +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h new file mode 100644 index 000000000..459d8be40 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h @@ -0,0 +1,70 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for UDP.c. + */ + +#ifndef _UDP_H_ +#define _UDP_H_ + + /* Includes: */ + #include <avr/io.h> + + #include "EthernetProtocols.h" + #include "Ethernet.h" + #include "ProtocolDecoders.h" + #include "DHCP.h" + + /* Macros: */ + /** Source UDP port for a DHCP request. */ + #define UDP_PORT_DHCP_REQUEST 67 + + /** Destination UDP port for a DHCP reply. */ + #define UDP_PORT_DHCP_REPLY 68 + + /* Type Defines: */ + /** Type define for a UDP packet header. */ + typedef struct + { + uint16_t SourcePort; /**< Packet source port */ + uint16_t DestinationPort; /**< Packet destination port */ + uint16_t Length; /**< Total packet length, in bytes */ + uint16_t Checksum; /**< Optional UDP packet checksum */ + } UDP_Header_t; + + /* Function Prototypes: */ + int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, + void* UDPHeaderInStart, + void* UDPHeaderOutStart); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c new file mode 100644 index 000000000..be4c3a6f6 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c @@ -0,0 +1,203 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Simple webserver application for demonstrating the RNDIS demo and TCP/IP stack. This + * application will serve up a static HTTP web page when requested by the host. + */ + +#include "Webserver.h" + +/** HTTP server response header, for transmission before the page contents. This indicates to the host that a page exists at the + * given location, and gives extra connection information. + */ +const char HTTP200Header[] PROGMEM = "HTTP/1.1 200 OK\r\n" + "Server: LUFA RNDIS\r\n" + "Content-type: text/html\r\n" + "Connection: close\r\n\r\n"; + +/** HTTP server response header, for transmission before a resource not found error. This indicates to the host that the given + * given URL is invalid, and gives extra error information. + */ +const char HTTP404Header[] PROGMEM = "HTTP/1.1 404 Not Found\r\n" + "Server: LUFA RNDIS\r\n" + "Connection: close\r\n\r\n"; + +/** HTTP page to serve to the host when a HTTP request is made. This page is too long for a single response, thus it is automatically + * broken up into smaller blocks and sent as a series of packets each time the webserver application callback is run. + */ +const char HTTPPage[] PROGMEM = + "<html>" + " <head>" + " <title>" + " LUFA Webserver Demo" + " </title>" + " </head>" + " <body>" + " <h1>Hello from your USB AVR!</h1>" + " <p>" + " Hello! Welcome to the LUFA RNDIS Demo Webserver test page, running on your USB AVR via the LUFA library. This demonstrates the HTTP webserver, TCP/IP stack and RNDIS demo all running atop the LUFA USB stack." + " <br /><br />" + " <small>Project Information: <a href=\"http://www.lufa-lib.org\">http://www.lufa-lib.org</a>.</small>" + " <hr />" + " <i>LUFA Version: </i>" LUFA_VERSION_STRING + " </p>" + " </body>" + "</html>"; + + +/** Initializes the Webserver application, opening the appropriate HTTP port in the TCP handler and registering the application + * callback routine for packets sent to the HTTP protocol port. + */ +void Webserver_Init(void) +{ + /* Open the HTTP port in the TCP protocol so that HTTP connections to the device can be established */ + TCP_SetPortState(TCP_PORT_HTTP, TCP_Port_Open, Webserver_ApplicationCallback); +} + +/** Indicates if a given request equals the given HTTP command. + * + * \param[in] RequestHeader HTTP request made by the host + * \param[in] Command HTTP command to compare the request to + * + * \return Boolean \c true if the command matches the request, \c false otherwise + */ +static bool IsHTTPCommand(uint8_t* RequestHeader, + char* Command) +{ + /* Returns true if the non null terminated string in RequestHeader matches the null terminated string Command */ + return (strncmp((char*)RequestHeader, Command, strlen(Command)) == 0); +} + +/** Application callback routine, executed each time the TCP processing task runs. This callback determines what request + * has been made (if any), and serves up appropriate responses. + * + * \param[in] ConnectionState Pointer to a TCP Connection State structure giving connection information + * \param[in,out] Buffer Pointer to the application's send/receive packet buffer + */ +void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, + TCP_ConnectionBuffer_t* const Buffer) +{ + char* BufferDataStr = (char*)Buffer->Data; + static uint8_t PageBlock = 0; + + /* Check to see if a packet has been received on the HTTP port from a remote host */ + if (TCP_APP_HAS_RECEIVED_PACKET(Buffer)) + { + if (IsHTTPCommand(Buffer->Data, "GET")) + { + if (IsHTTPCommand(Buffer->Data, "GET / ")) + { + PageBlock = 0; + + /* Copy the HTTP 200 response header into the packet buffer */ + strcpy_P(BufferDataStr, HTTP200Header); + + /* Send the buffer contents to the host */ + TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); + + /* Lock the buffer to Device->Host transmissions only while we send the page contents */ + TCP_APP_CAPTURE_BUFFER(Buffer); + } + else + { + /* Copy the HTTP 404 response header into the packet buffer */ + strcpy_P(BufferDataStr, HTTP404Header); + + /* Send the buffer contents to the host */ + TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); + + /* All data sent, close the connection */ + TCP_APP_CLOSECONNECTION(ConnectionState); + } + } + else if (IsHTTPCommand(Buffer->Data, "HEAD")) + { + if (IsHTTPCommand(Buffer->Data, "HEAD / ")) + { + /* Copy the HTTP response header into the packet buffer */ + strcpy_P(BufferDataStr, HTTP200Header); + + /* Send the buffer contents to the host */ + TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); + } + else + { + /* Copy the HTTP response header into the packet buffer */ + strcpy_P(BufferDataStr, HTTP404Header); + + /* Send the buffer contents to the host */ + TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); + } + + /* All data sent, close the connection */ + TCP_APP_CLOSECONNECTION(ConnectionState); + } + else if (IsHTTPCommand(Buffer->Data, "TRACE")) + { + /* Echo the host's query back to the host */ + TCP_APP_SEND_BUFFER(Buffer, Buffer->Length); + + /* All data sent, close the connection */ + TCP_APP_CLOSECONNECTION(ConnectionState); + } + else + { + /* Unknown request, just clear the buffer (drop the packet) */ + TCP_APP_CLEAR_BUFFER(Buffer); + } + } + else if (TCP_APP_HAVE_CAPTURED_BUFFER(Buffer)) + { + uint16_t RemLength = strlen_P(&HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE]); + uint16_t Length; + + /* Determine the length of the loaded block */ + Length = ((RemLength > HTTP_REPLY_BLOCK_SIZE) ? HTTP_REPLY_BLOCK_SIZE : RemLength); + + /* Copy the next buffer sized block of the page to the packet buffer */ + strncpy_P(BufferDataStr, &HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE], Length); + + /* Send the buffer contents to the host */ + TCP_APP_SEND_BUFFER(Buffer, Length); + + /* Check to see if the entire page has been sent */ + if (PageBlock++ == (sizeof(HTTPPage) / HTTP_REPLY_BLOCK_SIZE)) + { + /* Unlock the buffer so that the host can fill it with future packets */ + TCP_APP_RELEASE_BUFFER(Buffer); + + /* Close the connection to the host */ + TCP_APP_CLOSECONNECTION(ConnectionState); + } + } +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h new file mode 100644 index 000000000..e8bb542c1 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h @@ -0,0 +1,57 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Webserver.c. + */ + +#ifndef _WEBSERVER_H_ +#define _WEBSERVER_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/pgmspace.h> + + #include <LUFA/Version.h> + + #include "TCP.h" + + /* Macros: */ + /** Maximum size of a HTTP response per transmission */ + #define HTTP_REPLY_BLOCK_SIZE 128 + + /* Function Prototypes: */ + void Webserver_Init(void); + void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, + TCP_ConnectionBuffer_t* const Buffer); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c new file mode 100644 index 000000000..aac1b146d --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c @@ -0,0 +1,179 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the RNDISEthernet demo. This file contains the main tasks of + * the demo and is responsible for the initial application hardware configuration. + */ + +#include "RNDISEthernet.h" + +/** Message buffer for RNDIS messages processed by the RNDIS device class driver. */ +static uint8_t RNDIS_Message_Buffer[192]; + +/** Global to store the incoming frame from the host before it is processed by the device. */ +static Ethernet_Frame_Info_t FrameIN; + +/** Global to store the outgoing frame created in the device before it is sent to the host. */ +static Ethernet_Frame_Info_t FrameOUT; + +/** LUFA RNDIS Class driver interface configuration and state information. This structure is + * passed to all RNDIS Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface = + { + .Config = + { + .ControlInterfaceNumber = INTERFACE_ID_CDC_CCI, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, + .AdapterVendorDescription = "LUFA RNDIS Demo Adapter", + .AdapterMACAddress = {ADAPTER_MAC_ADDRESS}, + .MessageBuffer = RNDIS_Message_Buffer, + .MessageBufferLength = sizeof(RNDIS_Message_Buffer), + }, + }; + + +/** Main program entry point. This routine contains the overall program flow, including initial + * setup of all components and the main program loop. + */ +int main(void) +{ + SetupHardware(); + + TCP_Init(); + Webserver_Init(); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + GlobalInterruptEnable(); + + for (;;) + { + if (RNDIS_Device_IsPacketReceived(&Ethernet_RNDIS_Interface)) + { + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + + RNDIS_Device_ReadPacket(&Ethernet_RNDIS_Interface, &FrameIN.FrameData, &FrameIN.FrameLength); + Ethernet_ProcessPacket(&FrameIN, &FrameOUT); + + if (FrameOUT.FrameLength) + { + RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface, &FrameOUT.FrameData, FrameOUT.FrameLength); + FrameOUT.FrameLength = 0; + } + + LEDs_SetAllLEDs(LEDMASK_USB_READY); + } + + TCP_TCPTask(&Ethernet_RNDIS_Interface, &FrameOUT); + + RNDIS_Device_USBTask(&Ethernet_RNDIS_Interface); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ +#if (ARCH == ARCH_AVR8) + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); +#elif (ARCH == ARCH_XMEGA) + /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */ + XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); + XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); + + /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */ + XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); + XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); + + PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm; +#endif + + /* Hardware Initialization */ + LEDs_Init(); + Serial_Init(9600, false); + USB_Init(); + + /* Create a stdio stream for the serial port for stdin and stdout */ + Serial_CreateStream(NULL); +} + +/** Event handler for the library USB Connection event. */ +void EVENT_USB_Device_Connect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the library USB Disconnection event. */ +void EVENT_USB_Device_Disconnect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the library USB Configuration Changed event. */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool ConfigSuccess = true; + + ConfigSuccess &= RNDIS_Device_ConfigureEndpoints(&Ethernet_RNDIS_Interface); + + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); +} + +/** Event handler for the library USB Control Request reception event. */ +void EVENT_USB_Device_ControlRequest(void) +{ + RNDIS_Device_ProcessControlRequest(&Ethernet_RNDIS_Interface); +} + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h new file mode 100644 index 000000000..ab2488b77 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h @@ -0,0 +1,84 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for RNDISEthernet.c. + */ + +#ifndef _RNDISETHERNET_H_ +#define _RNDISETHERNET_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/wdt.h> + #include <avr/power.h> + #include <avr/interrupt.h> + #include <string.h> + + #include "Descriptors.h" + + #include "Lib/Ethernet.h" + #include "Lib/TCP.h" + #include "Lib/ARP.h" + #include "Lib/Webserver.h" + #include "Config/AppConfig.h" + + #include <LUFA/Drivers/Board/LEDs.h> + #include <LUFA/Drivers/Peripheral/Serial.h> + #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> + + /* Macros: */ + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ + #define LEDMASK_USB_NOTREADY LEDS_LED1 + + /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ + #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ + #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) + + /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ + #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ + #define LEDMASK_USB_BUSY LEDS_LED2 + + /* Function Prototypes: */ + void SetupHardware(void); + + void EVENT_USB_Device_Connect(void); + void EVENT_USB_Device_Disconnect(void); + void EVENT_USB_Device_ConfigurationChanged(void); + void EVENT_USB_Device_ControlRequest(void); + +#endif + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt new file mode 100644 index 000000000..a2c2ac604 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt @@ -0,0 +1,146 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet) + * + * \section Sec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series AU XMEGA AVRs (ATXMEGAxxxAxU) + * \li Series B XMEGA AVRs (ATXMEGAxxxBx) + * \li Series C XMEGA AVRs (ATXMEGAxxxCx) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Device</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Communications Device Class (CDC)</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>Microsoft RNDIS Specification</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * Remote Network Driver Interface demonstration application. + * This gives a simple reference application for implementing + * a CDC RNDIS device acting as a simple network interface for + * ethernet packet exchange. RNDIS is a proprietary Microsoft + * standard; this demo will only work on Windows 2000 (manually + * patched with the Microsoft RNDIS hotfix) and above (with no + * manual patches), or on the latest Linux kernels. + * + * Before running, you will need to install the INF file that + * is located in the RNDISEthernet project directory. This will + * enable Windows to use its inbuilt RNDIS drivers, negating the + * need for special Windows drivers for the device. To install, + * right-click the .INF file and choose the Install option. If + * Windows 2000 is used, the Microsoft INF file in the hotfix + * will need to be altered to use the VID/PID of the demo and + * then chosen instead of the LUFA RNDIS INF file when prompted. + * + * When enumerated, this demo will install as a new network + * adapter which ethernet packets can be sent to and received + * from. Running on top of the adapter is a very simple TCP/IP + * stack with a HTTP webserver and TELNET host which can be + * accessed through a web browser at IP address 10.0.0.2:80 or + * through a TELNET client at 10.0.0.2:25. This device also supports + * ping echos via the ICMP protocol. + * + * \note The TCP/IP stack in this demo has a number of limitations + * and should serve as an example only - it is not fully featured nor + * compliant to the TCP/IP specification. For complete projects, it is + * recommended that it be replaced with an external open source TCP/IP + * stack that is feature complete, such as the uIP stack. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <th><b>Define Name:</b></th> + * <th><b>Location:</b></th> + * <th><b>Description:</b></th> + * </tr> + * <tr> + * <td>CLIENT_IP_ADDRESS</td> + * <td>AppConfig.h</td> + * <td>Configures the IP address given to the client (PC) via the DHCP server.</td> + * </tr> + * <tr> + * <td>SERVER_IP_ADDRESS</td> + * <td>AppConfig.h</td> + * <td>Configures the IP address of the virtual server.</td> + * </tr> + * <tr> + * <td>ADAPTER_MAC_ADDRESS</td> + * <td>AppConfig.h</td> + * <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td> + * </tr> + * <tr> + * <td>SERVER_MAC_ADDRESS</td> + * <td>AppConfig.h</td> + * <td>Configures the MAC address of the virtual server on the network.</td> + * </tr> + * <tr> + * <td>NO_DECODE_ETHERNET</td> + * <td>AppConfig.h</td> + * <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td> + * </tr> + * <tr> + * <td>NO_DECODE_ARP</td> + * <td>AppConfig.h</td> + * <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td> + * </tr> + * <tr> + * <td>NO_DECODE_IP</td> + * <td>AppConfig.h</td> + * <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td> + * </tr> + * <tr> + * <td>NO_DECODE_ICMP</td> + * <td>AppConfig.h</td> + * <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td> + * </tr> + * <tr> + * <td>NO_DECODE_TCP</td> + * <td>AppConfig.h</td> + * <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td> + * </tr> + * <tr> + * <td>NO_DECODE_UDP</td> + * <td>AppConfig.h</td> + * <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td> + * </tr> + * <tr> + * <td>NO_DECODE_DHCP</td> + * <td>AppConfig.h</td> + * <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td> + * </tr> + * </table> + */ + diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/asf.xml b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/asf.xml new file mode 100644 index 000000000..e871a8799 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/asf.xml @@ -0,0 +1,84 @@ +<asf xmlversion="1.0">
+ <project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.avr8">
+ <require idref="lufa.demos.device.class.rndis"/>
+ <require idref="lufa.boards.dummy.avr8"/>
+ <generator value="as5_8"/>
+
+ <device-support value="at90usb1287"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
+ </project>
+
+ <project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.xmega">
+ <require idref="lufa.demos.device.class.rndis"/>
+ <require idref="lufa.boards.dummy.xmega"/>
+ <generator value="as5_8"/>
+
+ <device-support value="atxmega128a1u"/>
+ <config name="lufa.drivers.board.name" value="none"/>
+
+ <build type="define" name="F_CPU" value="32000000UL"/>
+ <build type="define" name="F_USB" value="48000000UL"/>
+ </project>
+
+ <module type="application" id="lufa.demos.device.class.rndis" caption="RNDIS Ethernet Device Demo (Class Driver APIs)">
+ <info type="description" value="summary">
+ Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+ </info>
+
+ <info type="gui-flag" value="move-to-root"/>
+
+ <info type="keyword" value="Technology">
+ <keyword value="Class Driver APIs"/>
+ <keyword value="USB Device"/>
+ <keyword value="RNDIS Class"/>
+ </info>
+
+ <device-support-alias value="lufa_avr8"/>
+ <device-support-alias value="lufa_xmega"/>
+ <device-support-alias value="lufa_uc3"/>
+
+ <build type="distribute" subtype="user-file" value="doxyfile"/>
+ <build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/>
+ <build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/>
+
+ <build type="c-source" value="RNDISEthernet.c"/>
+ <build type="c-source" value="Descriptors.c"/>
+ <build type="c-source" value="Lib/ARP.c"/>
+ <build type="c-source" value="Lib/DHCP.c"/>
+ <build type="c-source" value="Lib/Ethernet.c"/>
+ <build type="c-source" value="Lib/ICMP.c"/>
+ <build type="c-source" value="Lib/IP.c"/>
+ <build type="c-source" value="Lib/ProtocolDecoders.c"/>
+ <build type="c-source" value="Lib/TCP.c"/>
+ <build type="c-source" value="Lib/UDP.c"/>
+ <build type="c-source" value="Lib/Webserver.c"/>
+ <build type="header-file" value="RNDISEthernet.h"/>
+ <build type="header-file" value="Descriptors.h"/>
+ <build type="header-file" value="Lib/ARP.h"/>
+ <build type="header-file" value="Lib/DHCP.h"/>
+ <build type="header-file" value="Lib/Ethernet.h"/>
+ <build type="header-file" value="Lib/ICMP.h"/>
+ <build type="header-file" value="Lib/IP.h"/>
+ <build type="header-file" value="Lib/ProtocolDecoders.h"/>
+ <build type="header-file" value="Lib/TCP.h"/>
+ <build type="header-file" value="Lib/UDP.h"/>
+ <build type="header-file" value="Lib/Webserver.h"/>
+ <build type="header-file" value="Lib/EthernetProtocols.h"/>
+
+ <build type="module-config" subtype="path" value="Config"/>
+ <build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+ <build type="header-file" value="Config/AppConfig.h"/>
+ <build type="header-file" value="Config/LUFAConfig.h"/>
+
+ <require idref="lufa.common"/>
+ <require idref="lufa.platform"/>
+ <require idref="lufa.drivers.usb"/>
+ <require idref="lufa.drivers.board"/>
+ <require idref="lufa.drivers.board.leds"/>
+ <require idref="lufa.drivers.peripheral.usart"/>
+ <require idref="lufa.drivers.misc.ansi"/>
+ </module>
+</asf>
diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/doxyfile b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/doxyfile new file mode 100644 index 000000000..29d07c317 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/doxyfile @@ -0,0 +1,2395 @@ +# Doxyfile 1.8.9 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "LUFA Library - RNDIS Ethernet Demo" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = ./Documentation/ + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = YES + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = NO + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = YES + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = NO + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = NO + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = NO + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. + +INPUT = ./ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. + +FILE_PATTERNS = *.h \ + *.c \ + *.txt + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = Documentation/ + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = __* \ + INCLUDE_FROM_* + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = NO + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = NO + +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the +# cost of reduced performance. This can be particularly helpful with template +# rich C++ code for which doxygen's built-in parser lacks the necessary type +# information. +# Note: The availability of this option depends on whether or not doxygen was +# compiled with the --with-libclang option. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = YES + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = YES + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = YES + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 1 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +SEARCHENGINE = NO + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. There +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Searching" for details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# Configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# The default value is: YES. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. +# +# Note that when enabling USE_PDFLATEX this option is only used for generating +# bitmaps for formulas in the HTML output, but not in the Makefile that is +# written to the output directory. +# The default file is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. To get the times font for +# instance you can specify +# EXTRA_PACKAGES=times +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. +# +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. +# +# Note: Only use a user-defined footer if you know what you are doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES, to get a +# higher quality PDF documentation. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BATCHMODE = NO + +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HIDE_INDICES = NO + +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. See +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plain. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# Configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's config +# file, i.e. a series of assignments. You only have to provide replacements, +# missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to doxygen's config file. A template extensions file can be generated +# using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTENSIONS_FILE = + +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# classes and files. +# The default value is: NO. + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_EXTENSION = .3 + +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_OUTPUT = xml + +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sf.net) file that captures the +# structure of the code including all documentation. Note that this feature is +# still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO, the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_ONLY_PREDEF = YES + +# If the SEARCH_INCLUDES tag is set to YES, the include files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by the +# preprocessor. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +PREDEFINED = __DOXYGEN__ \ + PROGMEM + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have a unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which doxygen is +# run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. +# The default value is: NO. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. + +EXTERNAL_GROUPS = YES + +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of 'which perl'). +# The default file (with absolute path) is: /usr/bin/perl. + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. + +CLASS_DIAGRAMS = NO + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see: +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# If set to YES the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz (see: +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: NO. + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed +# to run in parallel. When set to 0 doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NUM_THREADS = 0 + +# When you want a differently looking font in the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTNAME = + +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTPATH = + +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +CLASS_GRAPH = NO + +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +COLLABORATION_GRAPH = NO + +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for +# groups, showing the direct groups dependencies. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GROUP_GRAPHS = NO + +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LIMIT_NUM_FIELDS = 10 + +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +TEMPLATE_RELATIONS = NO + +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDE_GRAPH = NO + +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDED_BY_GRAPH = NO + +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GRAPHICAL_HIERARCHY = NO + +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DIRECTORY_GRAPH = NO + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order +# to make the SVG files visible in IE 9+ (other browsers do not have this +# requirement). +# Possible values are: png, jpg, gif and svg. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make +# the SVG files visible. Older versions of IE do not have SVG support. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +INTERACTIVE_SVG = NO + +# The DOT_PATH tag can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = + +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that doxygen if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_GRAPH_MAX_NODES = 15 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +MAX_DOT_GRAPH_DEPTH = 2 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_TRANSPARENT = YES + +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# files that are used to generate the various graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_CLEANUP = YES diff --git a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/makefile b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/makefile new file mode 100644 index 000000000..c6a3a54a4 --- /dev/null +++ b/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -0,0 +1,44 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2017. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +# Run "make help" for target help. + +MCU = at90usb1287 +ARCH = AVR8 +BOARD = USBKEY +F_CPU = 8000000 +F_USB = $(F_CPU) +OPTIMIZATION = s +TARGET = RNDISEthernet +SRC = $(TARGET).c Descriptors.c Lib/Ethernet.c Lib/ProtocolDecoders.c Lib/ICMP.c Lib/TCP.c Lib/UDP.c Lib/DHCP.c Lib/ARP.c \ + Lib/IP.c Lib/Webserver.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL) +LUFA_PATH = ../../../../LUFA +CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ +LD_FLAGS = + +# Default target +all: + +# Include LUFA-specific DMBS extension modules +DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA +include $(DMBS_LUFA_PATH)/lufa-sources.mk +include $(DMBS_LUFA_PATH)/lufa-gcc.mk + +# Include common DMBS build system modules +DMBS_PATH ?= $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/core.mk +include $(DMBS_PATH)/cppcheck.mk +include $(DMBS_PATH)/doxygen.mk +include $(DMBS_PATH)/dfu.mk +include $(DMBS_PATH)/gcc.mk +include $(DMBS_PATH)/hid.mk +include $(DMBS_PATH)/avrdude.mk +include $(DMBS_PATH)/atprogram.mk |