diff options
Diffstat (limited to 'lib/lufa/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c')
| -rw-r--r-- | lib/lufa/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c | 250 |
1 files changed, 250 insertions, 0 deletions
diff --git a/lib/lufa/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c b/lib/lufa/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c new file mode 100644 index 000000000..9db4798a5 --- /dev/null +++ b/lib/lufa/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c @@ -0,0 +1,250 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the AudioInputHost demo. This file contains the main tasks of + * the demo and is responsible for the initial application hardware configuration. + */ + +#include "AudioInputHost.h" + +/** Main program entry point. This routine configures the hardware required by the application, then + * enters a loop to run the application tasks in sequence. + */ +int main(void) +{ + SetupHardware(); + + puts_P(PSTR(ESC_FG_CYAN "Audio Input Host Demo running.\r\n" ESC_FG_WHITE)); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + GlobalInterruptEnable(); + + for (;;) + { + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ +#if (ARCH == ARCH_AVR8) + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); +#endif + + /* Hardware Initialization */ + Serial_Init(9600, false); + LEDs_Init(); + USB_Init(); + + /* Create a stdio stream for the serial port for stdin and stdout */ + Serial_CreateStream(NULL); +} + +/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and + * starts the library USB task to begin the enumeration and USB management process. + */ +void EVENT_USB_Host_DeviceAttached(void) +{ + puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE)); + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and + * stops the library USB task management process. + */ +void EVENT_USB_Host_DeviceUnattached(void) +{ + puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE)); + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully + * enumerated by the host and is now ready to be used by the application. + */ +void EVENT_USB_Host_DeviceEnumerationComplete(void) +{ + puts_P(PSTR("Getting Config Data.\r\n")); + + uint8_t ErrorCode; + + /* Get and process the configuration descriptor data */ + if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) + { + if (ErrorCode == ControlError) + puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n")); + else + puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); + + printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + return; + } + + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ + if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) + { + printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + return; + } + + if ((ErrorCode = USB_Host_SetInterfaceAltSetting(StreamingInterfaceIndex, + StreamingInterfaceAltSetting)) != HOST_SENDCONTROL_Successful) + { + printf_P(PSTR(ESC_FG_RED "Could not set alternative streaming interface setting.\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + USB_Host_SetDeviceConfiguration(0); + return; + } + + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT), + .bRequest = AUDIO_REQ_SetCurrent, + .wValue = (AUDIO_EPCONTROL_SamplingFreq << 8), + .wIndex = StreamingEndpointAddress, + .wLength = sizeof(USB_Audio_SampleFreq_t), + }; + + USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000); + + /* Select the control pipe for the request transfer */ + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + /* Set the sample rate on the streaming interface endpoint */ + if ((ErrorCode = USB_Host_SendControlRequest(&SampleRate)) != HOST_SENDCONTROL_Successful) + { + printf_P(PSTR(ESC_FG_RED "Could not set requested Audio sample rate.\r\n" + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + USB_Host_SetDeviceConfiguration(0); + return; + } + + /* Sample reload timer initialization */ + TIMSK0 = (1 << OCIE0A); + OCR0A = ((F_CPU / 8 / 48000) - 1); + TCCR0A = (1 << WGM01); // CTC mode + TCCR0B = (1 << CS01); // Fcpu/8 speed + + /* Set speaker as output */ + DDRC |= (1 << 6); + + /* PWM speaker timer initialization */ + TCCR3A = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)); // Set on match, clear on TOP + TCCR3B = ((1 << WGM32) | (1 << CS30)); // Fast 8-Bit PWM, F_CPU speed + + puts_P(PSTR("Microphone Enumerated.\r\n")); + LEDs_SetAllLEDs(LEDMASK_USB_READY); +} + +/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ +void EVENT_USB_Host_HostError(const uint8_t ErrorCode) +{ + USB_Disable(); + + printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n" + " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); + for(;;); +} + +/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while + * enumerating an attached USB device. + */ +void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode) +{ + printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n" + " -- Error Code %d\r\n" + " -- Sub Error Code %d\r\n" + " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); + + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); +} + +/** ISR to handle the reloading of the PWM timer with the next sample. */ +ISR(TIMER0_COMPA_vect, ISR_BLOCK) +{ + uint8_t PrevPipe = Pipe_GetCurrentPipe(); + + Pipe_SelectPipe(AUDIO_DATA_IN_PIPE); + Pipe_Unfreeze(); + + /* Check if the current pipe can be read from (contains a packet) and the device is sending data */ + if (Pipe_IsINReceived()) + { + /* Retrieve the signed 16-bit audio sample, convert to 8-bit */ + int8_t Sample_8Bit = (Pipe_Read_16_LE() >> 8); + + /* Check to see if the bank is now empty */ + if (!(Pipe_IsReadWriteAllowed())) + { + /* Acknowledge the packet, clear the bank ready for the next packet */ + Pipe_ClearIN(); + } + + /* Load the sample into the PWM timer channel */ + OCR3A = (Sample_8Bit ^ (1 << 7)); + + uint8_t LEDMask = LEDS_NO_LEDS; + + /* Turn on LEDs as the sample amplitude increases */ + if (Sample_8Bit > 16) + LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4); + else if (Sample_8Bit > 8) + LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3); + else if (Sample_8Bit > 4) + LEDMask = (LEDS_LED1 | LEDS_LED2); + else if (Sample_8Bit > 2) + LEDMask = (LEDS_LED1); + + LEDs_SetAllLEDs(LEDMask); + } + + Pipe_Freeze(); + Pipe_SelectPipe(PrevPipe); +} + |