diff options
Diffstat (limited to 'lib/lufa/Projects/Webserver/Webserver.txt')
| -rw-r--r-- | lib/lufa/Projects/Webserver/Webserver.txt | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/lib/lufa/Projects/Webserver/Webserver.txt b/lib/lufa/Projects/Webserver/Webserver.txt new file mode 100644 index 000000000..10aa71652 --- /dev/null +++ b/lib/lufa/Projects/Webserver/Webserver.txt @@ -0,0 +1,126 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage uIP Powered Webserver Project + * + * \section Sec_Compat Project Compatibility: + * + * The following list indicates what microcontrollers are compatible with this project. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this project. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Dual Mode Host/Device</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Communications Device Class (CDC) \n + * Mass Storage Device</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard) \n + * Bulk-Only Transport</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>Microsoft RNDIS Specification \n + * USBIF Mass Storage Standard \n + * USB Bulk-Only Transport Standard \n + * SCSI Primary Commands Specification \n + * SCSI Block Commands Specification</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * Simple HTTP webserver project. This project combines the LUFA library with the uIP TCP/IP full network stack and FatFS + * library to create a RNDIS host capable of serving out HTTP web pages to multiple hosts simultaneously. This project + * demonstrates how the libraries can be combined into a robust network enabled application, with the addition of a RNDIS + * network device. + * + * To use this project, plug the USB AVR into a computer, so that it enumerates as a standard Mass Storage and RNDIS composite + * device. Load HTML files onto the disk, so that they can be served out to clients -- the default file to serve should be called + * <i>index.htm</i>. Filenames must be in 8.3 format for them to be retrieved correctly by the webserver, and the total + * requested file path must be equal to or less than the maximum URI length (\see \ref Sec_Options). Supply the included INF + * file when requested on Windows machines to enable the RNDIS interface, and allow the files to be viewed on a standard web-browser + * using the IP address 10.0.0.2. + * + * When attached to a RNDIS class device, such as a USB (desktop) modem, the system will enumerate the device, set the + * appropriate parameters needed for connectivity and begin listening for new HTTP connections on port 80 and TELNET + * connections on port 23. The device IP, netmask and default gateway IP must be set to values appropriate for the RNDIS + * device being used for this project to work if the DHCP client is disabled (see \ref Sec_Options) - otherwise, the device + * will query the network's DHCP server for these parameters automatically. + * + * When properly configured, the webserver can be accessed from any HTTP web browser by typing in the device's statically or + * dynamically allocated IP address. The TELNET client can be accessed via any network socket app by connecting to the device + * on port 23 on the device's statically or dynamically allocated IP address. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <th><b>Define Name:</b></th> + * <th><b>Location:</b></th> + * <th><b>Description:</b></th> + * </tr> + * <tr> + * <td>ENABLE_TELNET_SERVER</td> + * <td>AppConfig.h</td> + * <td>When defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incoming connections + * and processes user commands.</td> + * </tr> + * <tr> + * <td>ENABLE_DHCP_CLIENT</td> + * <td>AppConfig.h</td> + * <td>When defined, this enables the DHCP client for dynamic IP allocation of the network settings from a DHCP server.</td> + * </tr> + * <tr> + * <td>ENABLE_DHCP_SERVER</td> + * <td>AppConfig.h</td> + * <td>When defined, this enables the DHCP server for dynamic IP allocation of the network settings to a DHCP client.</td> + * </tr> + * <tr> + * <td>DEVICE_IP_ADDRESS</td> + * <td>AppConfig.h</td> + * <td>IP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td> + * </tr> + * <tr> + * <td>DEVICE_NETMASK</td> + * <td>AppConfig.h</td> + * <td>Netmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td> + * </tr> + * <tr> + * <td>DEVICE_GATEWAY</td> + * <td>AppConfig.h</td> + * <td>Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT + * is not defined).</td> + * </tr> + * <tr> + * <td>MAX_URI_LENGTH</td> + * <td>AppConfig.h</td> + * <td>Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators.</td> + * </tr> + * <tr> + * <td>SERVER_MAC_ADDRESS</td> + * <td>AppConfig.h</td> + * <td>MAC address of the server used when sending Ethernet packets onto the bus.</td> + * </tr> + * </table> + */ + |