aboutsummaryrefslogtreecommitdiffstats
path: root/quantum/dynamic_macro.h
diff options
context:
space:
mode:
Diffstat (limited to 'quantum/dynamic_macro.h')
-rw-r--r--quantum/dynamic_macro.h137
1 files changed, 55 insertions, 82 deletions
diff --git a/quantum/dynamic_macro.h b/quantum/dynamic_macro.h
index 07cba19f6..c7632c004 100644
--- a/quantum/dynamic_macro.h
+++ b/quantum/dynamic_macro.h
@@ -30,7 +30,7 @@
* there have been reports of it being too much in some users' cases,
* so 128 is considered a safe default.
*/
-#define DYNAMIC_MACRO_SIZE 128
+# define DYNAMIC_MACRO_SIZE 128
#endif
/* DYNAMIC_MACRO_RANGE must be set as the last element of user's
@@ -46,8 +46,7 @@ enum dynamic_macro_keycodes {
};
/* Blink the LEDs to notify the user about some event. */
-void dynamic_macro_led_blink(void)
-{
+void dynamic_macro_led_blink(void) {
#ifdef BACKLIGHT_ENABLE
backlight_toggle();
wait_ms(100);
@@ -59,10 +58,8 @@ void dynamic_macro_led_blink(void)
* need a `direction` variable accessible at the call site.
*/
#define DYNAMIC_MACRO_CURRENT_SLOT() (direction > 0 ? 1 : 2)
-#define DYNAMIC_MACRO_CURRENT_LENGTH(BEGIN, POINTER) \
- ((int)(direction * ((POINTER) - (BEGIN))))
-#define DYNAMIC_MACRO_CURRENT_CAPACITY(BEGIN, END2) \
- ((int)(direction * ((END2) - (BEGIN)) + 1))
+#define DYNAMIC_MACRO_CURRENT_LENGTH(BEGIN, POINTER) ((int)(direction * ((POINTER) - (BEGIN))))
+#define DYNAMIC_MACRO_CURRENT_CAPACITY(BEGIN, END2) ((int)(direction * ((END2) - (BEGIN)) + 1))
/**
* Start recording of the dynamic macro.
@@ -70,9 +67,7 @@ void dynamic_macro_led_blink(void)
* @param[out] macro_pointer The new macro buffer iterator.
* @param[in] macro_buffer The macro buffer used to initialize macro_pointer.
*/
-void dynamic_macro_record_start(
- keyrecord_t **macro_pointer, keyrecord_t *macro_buffer)
-{
+void dynamic_macro_record_start(keyrecord_t **macro_pointer, keyrecord_t *macro_buffer) {
dprintln("dynamic macro recording: started");
dynamic_macro_led_blink();
@@ -89,9 +84,7 @@ void dynamic_macro_record_start(
* @param macro_end[in] The element after the last macro buffer element.
* @param direction[in] Either +1 or -1, which way to iterate the buffer.
*/
-void dynamic_macro_play(
- keyrecord_t *macro_buffer, keyrecord_t *macro_end, int8_t direction)
-{
+void dynamic_macro_play(keyrecord_t *macro_buffer, keyrecord_t *macro_end, int8_t direction) {
dprintf("dynamic macro: slot %d playback\n", DYNAMIC_MACRO_CURRENT_SLOT());
uint32_t saved_layer_state = layer_state;
@@ -118,13 +111,7 @@ void dynamic_macro_play(
* @param direction[in] Either +1 or -1, which way to iterate the buffer.
* @param record[in] The current keypress.
*/
-void dynamic_macro_record_key(
- keyrecord_t *macro_buffer,
- keyrecord_t **macro_pointer,
- keyrecord_t *macro2_end,
- int8_t direction,
- keyrecord_t *record)
-{
+void dynamic_macro_record_key(keyrecord_t *macro_buffer, keyrecord_t **macro_pointer, keyrecord_t *macro2_end, int8_t direction, keyrecord_t *record) {
/* If we've just started recording, ignore all the key releases. */
if (!record->event.pressed && *macro_pointer == macro_buffer) {
dprintln("dynamic macro: ignoring a leading key-up event");
@@ -141,38 +128,25 @@ void dynamic_macro_record_key(
dynamic_macro_led_blink();
}
- dprintf(
- "dynamic macro: slot %d length: %d/%d\n",
- DYNAMIC_MACRO_CURRENT_SLOT(),
- DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, *macro_pointer),
- DYNAMIC_MACRO_CURRENT_CAPACITY(macro_buffer, macro2_end));
+ dprintf("dynamic macro: slot %d length: %d/%d\n", DYNAMIC_MACRO_CURRENT_SLOT(), DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, *macro_pointer), DYNAMIC_MACRO_CURRENT_CAPACITY(macro_buffer, macro2_end));
}
/**
* End recording of the dynamic macro. Essentially just update the
* pointer to the end of the macro.
*/
-void dynamic_macro_record_end(
- keyrecord_t *macro_buffer,
- keyrecord_t *macro_pointer,
- int8_t direction,
- keyrecord_t **macro_end)
-{
+void dynamic_macro_record_end(keyrecord_t *macro_buffer, keyrecord_t *macro_pointer, int8_t direction, keyrecord_t **macro_end) {
dynamic_macro_led_blink();
/* Do not save the keys being held when stopping the recording,
* i.e. the keys used to access the layer DYN_REC_STOP is on.
*/
- while (macro_pointer != macro_buffer &&
- (macro_pointer - direction)->event.pressed) {
+ while (macro_pointer != macro_buffer && (macro_pointer - direction)->event.pressed) {
dprintln("dynamic macro: trimming a trailing key-down event");
macro_pointer -= direction;
}
- dprintf(
- "dynamic macro: slot %d saved, length: %d\n",
- DYNAMIC_MACRO_CURRENT_SLOT(),
- DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, macro_pointer));
+ dprintf("dynamic macro: slot %d saved, length: %d\n", DYNAMIC_MACRO_CURRENT_SLOT(), DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, macro_pointer));
*macro_end = macro_pointer;
}
@@ -187,8 +161,7 @@ void dynamic_macro_record_end(
* <...THE REST OF THE FUNCTION...>
* }
*/
-bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record)
-{
+bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record) {
/* Both macros use the same buffer but read/write on different
* ends of it.
*
@@ -239,57 +212,57 @@ bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record)
/* No macro recording in progress. */
if (!record->event.pressed) {
switch (keycode) {
- case DYN_REC_START1:
- dynamic_macro_record_start(&macro_pointer, macro_buffer);
- macro_id = 1;
- return false;
- case DYN_REC_START2:
- dynamic_macro_record_start(&macro_pointer, r_macro_buffer);
- macro_id = 2;
- return false;
- case DYN_MACRO_PLAY1:
- dynamic_macro_play(macro_buffer, macro_end, +1);
- return false;
- case DYN_MACRO_PLAY2:
- dynamic_macro_play(r_macro_buffer, r_macro_end, -1);
- return false;
+ case DYN_REC_START1:
+ dynamic_macro_record_start(&macro_pointer, macro_buffer);
+ macro_id = 1;
+ return false;
+ case DYN_REC_START2:
+ dynamic_macro_record_start(&macro_pointer, r_macro_buffer);
+ macro_id = 2;
+ return false;
+ case DYN_MACRO_PLAY1:
+ dynamic_macro_play(macro_buffer, macro_end, +1);
+ return false;
+ case DYN_MACRO_PLAY2:
+ dynamic_macro_play(r_macro_buffer, r_macro_end, -1);
+ return false;
}
}
} else {
/* A macro is being recorded right now. */
switch (keycode) {
- case DYN_REC_STOP:
- /* Stop the macro recording. */
- if (record->event.pressed) { /* Ignore the initial release
- * just after the recoding
- * starts. */
+ case DYN_REC_STOP:
+ /* Stop the macro recording. */
+ if (record->event.pressed) { /* Ignore the initial release
+ * just after the recoding
+ * starts. */
+ switch (macro_id) {
+ case 1:
+ dynamic_macro_record_end(macro_buffer, macro_pointer, +1, &macro_end);
+ break;
+ case 2:
+ dynamic_macro_record_end(r_macro_buffer, macro_pointer, -1, &r_macro_end);
+ break;
+ }
+ macro_id = 0;
+ }
+ return false;
+ case DYN_MACRO_PLAY1:
+ case DYN_MACRO_PLAY2:
+ dprintln("dynamic macro: ignoring macro play key while recording");
+ return false;
+ default:
+ /* Store the key in the macro buffer and process it normally. */
switch (macro_id) {
- case 1:
- dynamic_macro_record_end(macro_buffer, macro_pointer, +1, &macro_end);
- break;
- case 2:
- dynamic_macro_record_end(r_macro_buffer, macro_pointer, -1, &r_macro_end);
- break;
+ case 1:
+ dynamic_macro_record_key(macro_buffer, &macro_pointer, r_macro_end, +1, record);
+ break;
+ case 2:
+ dynamic_macro_record_key(r_macro_buffer, &macro_pointer, macro_end, -1, record);
+ break;
}
- macro_id = 0;
- }
- return false;
- case DYN_MACRO_PLAY1:
- case DYN_MACRO_PLAY2:
- dprintln("dynamic macro: ignoring macro play key while recording");
- return false;
- default:
- /* Store the key in the macro buffer and process it normally. */
- switch (macro_id) {
- case 1:
- dynamic_macro_record_key(macro_buffer, &macro_pointer, r_macro_end, +1, record);
- break;
- case 2:
- dynamic_macro_record_key(r_macro_buffer, &macro_pointer, macro_end, -1, record);
+ return true;
break;
- }
- return true;
- break;
}
}
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-25 05:15:46 +0000