diff options
Diffstat (limited to 'tmk_core/tool')
-rw-r--r-- | tmk_core/tool/mbed/common.mk | 81 | ||||
-rw-r--r-- | tmk_core/tool/mbed/gcc.mk | 89 | ||||
-rw-r--r-- | tmk_core/tool/mbed/lpc-vector-checksum.c | 99 | ||||
-rw-r--r-- | tmk_core/tool/mbed/lpc11u35_501.mk | 50 | ||||
-rw-r--r-- | tmk_core/tool/mbed/mbed.mk | 85 |
5 files changed, 404 insertions, 0 deletions
diff --git a/tmk_core/tool/mbed/common.mk b/tmk_core/tool/mbed/common.mk new file mode 100644 index 000000000..77bf7c3e4 --- /dev/null +++ b/tmk_core/tool/mbed/common.mk @@ -0,0 +1,81 @@ +OBJECTS += \ + $(OBJDIR)/common/action.o \ + $(OBJDIR)/common/action_tapping.o \ + $(OBJDIR)/common/action_macro.o \ + $(OBJDIR)/common/action_layer.o \ + $(OBJDIR)/common/action_util.o \ + $(OBJDIR)/common/host.o \ + $(OBJDIR)/common/keymap.o \ + $(OBJDIR)/common/keyboard.o \ + $(OBJDIR)/common/print.o \ + $(OBJDIR)/common/debug.o \ + $(OBJDIR)/common/util.o \ + $(OBJDIR)/common/mbed/suspend.o \ + $(OBJDIR)/common/mbed/timer.o \ + $(OBJDIR)/common/mbed/xprintf.o \ + $(OBJDIR)/common/mbed/bootloader.o \ + +INCLUDE_PATHS += \ + -I$(TMK_DIR)/common \ + -I$(TMK_DIR)/protocol + +CC_FLAGS += -include $(CONFIG_H) + + + +# Option modules +ifdef BOOTMAGIC_ENABLE + $(error Not Supported) + OBJECTS += $(OBJDIR)/common/bootmagic.o + OBJECTS += $(OBJDIR)/common/mbed/eeprom.o + OPT_DEFS += -DBOOTMAGIC_ENABLE +endif + +ifdef MOUSEKEY_ENABLE + OBJECTS += $(OBJDIR)/common/mousekey.o + OPT_DEFS += -DMOUSEKEY_ENABLE + OPT_DEFS += -DMOUSE_ENABLE +endif + +ifdef EXTRAKEY_ENABLE + $(error Not Supported) + OPT_DEFS += -DEXTRAKEY_ENABLE +endif + +ifdef CONSOLE_ENABLE + $(error Not Supported) + OPT_DEFS += -DCONSOLE_ENABLE +else + OPT_DEFS += -DNO_PRINT + OPT_DEFS += -DNO_DEBUG +endif + +ifdef COMMAND_ENABLE + $(error Not Supported) + SRC += common/command.c + OPT_DEFS += -DCOMMAND_ENABLE +endif + +ifdef NKRO_ENABLE + $(error Not Supported) + OPT_DEFS += -DNKRO_ENABLE +endif + +ifdef SLEEP_LED_ENABLE + $(error Not Supported) + SRC += common/sleep_led.c + OPT_DEFS += -DSLEEP_LED_ENABLE + OPT_DEFS += -DNO_SUSPEND_POWER_DOWN +endif + +ifdef BACKLIGHT_ENABLE + $(error Not Supported) + SRC += common/backlight.c + OPT_DEFS += -DBACKLIGHT_ENABLE +endif + +ifdef KEYMAP_SECTION_ENABLE + $(error Not Supported) + OPT_DEFS += -DKEYMAP_SECTION_ENABLE + EXTRALDFLAGS = -Wl,-L$(TMK_DIR),-Tldscript_keymap_avr5.x +endif diff --git a/tmk_core/tool/mbed/gcc.mk b/tmk_core/tool/mbed/gcc.mk new file mode 100644 index 000000000..b8c7336b4 --- /dev/null +++ b/tmk_core/tool/mbed/gcc.mk @@ -0,0 +1,89 @@ +# based on Makefile exported form mbed.org +# see http://mbed.org/handbook/Exporting-to-GCC-ARM-Embedded + +GCC_BIN = +AS = $(GCC_BIN)arm-none-eabi-as +CC = $(GCC_BIN)arm-none-eabi-gcc +CPP = $(GCC_BIN)arm-none-eabi-g++ +LD = $(GCC_BIN)arm-none-eabi-gcc +OBJCOPY = $(GCC_BIN)arm-none-eabi-objcopy +OBJDUMP = $(GCC_BIN)arm-none-eabi-objdump +SIZE = $(GCC_BIN)arm-none-eabi-size +CHKSUM = $(TMK_DIR)/tool/mbed/lpc-vector-checksum + +CC_FLAGS += \ + $(CPU) \ + -c \ + -g \ + -fno-common \ + -fmessage-length=0 \ + -Wall \ + -fno-exceptions \ + -ffunction-sections \ + -fdata-sections \ + -fomit-frame-pointer +CC_FLAGS += -MMD -MP + +LD_FLAGS = $(CPU) -Wl,--gc-sections --specs=nano.specs +#LD_FLAGS += -u _printf_float -u _scanf_float +LD_FLAGS += -Wl,-Map=$(OBJDIR)/$(PROJECT).map,--cref +LD_SYS_LIBS = -lstdc++ -lsupc++ -lm -lc -lgcc -lnosys + +ifeq ($(DEBUG), 1) + CC_FLAGS += -DDEBUG -O0 +else + CC_FLAGS += -DNDEBUG -Os +endif + +all: $(OBJDIR)/$(PROJECT).bin $(OBJDIR)/$(PROJECT).hex + +clean: + rm -f $(OBJDIR)/$(PROJECT).bin $(OBJDIR)/$(PROJECT).elf $(OBJDIR)/$(PROJECT).hex $(OBJDIR)/$(PROJECT).map $(OBJDIR)/$(PROJECT).lst $(OBJECTS) $(DEPS) + rm -fr $(OBJDIR) + +$(OBJDIR)/%.o: %.s + mkdir -p $(@D) + $(AS) $(CPU) -o $@ $< + +$(OBJDIR)/%.o: %.c + mkdir -p $(@D) + $(CC) $(CC_FLAGS) $(CC_SYMBOLS) -std=gnu99 $(INCLUDE_PATHS) -o $@ $< + +$(OBJDIR)/%.o: %.cpp + mkdir -p $(@D) + $(CPP) $(CC_FLAGS) $(CC_SYMBOLS) -std=gnu++98 -fno-rtti $(INCLUDE_PATHS) -o $@ $< + + +$(OBJDIR)/$(PROJECT).elf: $(OBJECTS) $(SYS_OBJECTS) + $(LD) $(LD_FLAGS) -T$(LINKER_SCRIPT) $(LIBRARY_PATHS) -o $@ $^ $(LIBRARIES) $(LD_SYS_LIBS) $(LIBRARIES) $(LD_SYS_LIBS) + $(SIZE) $@ + +$(OBJDIR)/$(PROJECT).bin: $(OBJDIR)/$(PROJECT).elf + @$(OBJCOPY) -O binary $< $@ +ifneq (,$(findstring TARGET_NXP,$(CC_SYMBOLS))) + @echo + @echo "For NXP writing vector checksum value into $@ ..." + @$(CHKSUM) $@ + @echo +endif + +$(OBJDIR)/$(PROJECT).hex: $(OBJDIR)/$(PROJECT).elf + @$(OBJCOPY) -O ihex $< $@ + +$(OBJDIR)/$(PROJECT).lst: $(OBJDIR)/$(PROJECT).elf + @$(OBJDUMP) -Sdh $< > $@ + +lst: $(OBJDIR)/$(PROJECT).lst + +size: + $(SIZE) $(OBJDIR)/$(PROJECT).elf + +prog: $(OBJDIR)/$(PROJECT).bin + @echo "Program..." +ifneq ($(shell mount | grep 'CRP DISABLD'),) + umount /dev/nxpisp >/dev/null 2>&1 +endif + dd if=$< of=/dev/nxpisp seek=4 + +DEPS = $(OBJECTS:.o=.d) $(SYS_OBJECTS:.o=.d) +-include $(DEPS) diff --git a/tmk_core/tool/mbed/lpc-vector-checksum.c b/tmk_core/tool/mbed/lpc-vector-checksum.c new file mode 100644 index 000000000..316a1253a --- /dev/null +++ b/tmk_core/tool/mbed/lpc-vector-checksum.c @@ -0,0 +1,99 @@ +/*************************************************************************** +* https://github.com/dhylands/projects/blob/master/lpc/lpc-vector-checksum/lpc-vector-checksum.c +* +* Copyright (c) 2012 by Dave Hylands +* All Rights Reserved +* +* Permission is granted to any individual or institution to use, copy, +* modify, or redistribute this file so long as it is not sold for profit, +* and that this copyright notice is retained. +* +*************************************************************************** +* +* This program calculates the vector checksum used in LPC17xx binary +* images. +* +* Usage: lpc-vector-checksum file +* +***************************************************************************/ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <errno.h> +#include <string.h> + +/***************************************************************************/ +/** +* update_vector_checksum +* +* The algorithim is to write the checksum such that the checksum of the +* first 8 words is equal to zero. +* +* The LPC1768 uses little-endian, and this particular routine assumes +* that it's running on a little-endian architecture. +*/ +static int update_vector_checksum( const char *filename ) +{ + uint32_t sum; + uint32_t header[8]; + FILE *fs; + int i; + + if (( fs = fopen( filename, "r+b" )) == NULL ) + { + fprintf( stderr, "Unable to open '%s' for reading/writing (%d): %s\n", + filename, errno, strerror( errno )); + return 0; + } + + if ( fread( header, sizeof( header ), 1, fs ) != 1 ) + { + fprintf( stderr, "Failed to read header from '%s' (perhaps the file is too small?)", + filename ); + fclose( fs ); + return 0; + } + + sum = 0; + for ( i = 0; i < 7; i++ ) + { + sum += header[i]; + } + printf( "sum = 0x%08x, value to write = 0x%08x\n", sum, -sum ); + + /* write back the checksum to location 7 + * http://sigalrm.blogspot.jp/2011/10/cortex-m3-exception-vector-checksum.html + */ + fseek(fs, 0x1c, SEEK_SET); + sum = -sum; + fwrite(&sum, 4, 1, fs); + + fclose( fs ); + + return 1; +} + +/***************************************************************************/ +/** +* main +*/ +int main( int argc, char **argv ) +{ + int arg; + + if ( argc < 2) + { + fprintf( stderr, "Usage: lpc-vector-checksum file ...\n" ); + exit( 1 ); + } + + for ( arg = 1; arg < argc; arg++ ) + { + update_vector_checksum( argv[ arg ]); + } + + exit( 0 ); + return 0; +} + diff --git a/tmk_core/tool/mbed/lpc11u35_501.mk b/tmk_core/tool/mbed/lpc11u35_501.mk new file mode 100644 index 000000000..328d03d66 --- /dev/null +++ b/tmk_core/tool/mbed/lpc11u35_501.mk @@ -0,0 +1,50 @@ +# based on Makefile exported form mbed.org +# see http://mbed.org/handbook/Exporting-to-GCC-ARM-Embedded + +CPU = -mcpu=cortex-m0 -mthumb + +CC_SYMBOLS = \ + -DTARGET_LPC11U35_501 \ + -DTARGET_M0 \ + -DTARGET_CORTEX_M \ + -DTARGET_NXP \ + -DTARGET_LPC11UXX \ + -DTARGET_MCU_LPC11U35_501 \ + -DTOOLCHAIN_GCC_ARM \ + -DTOOLCHAIN_GCC \ + -D__CORTEX_M0 \ + -DARM_MATH_CM0 \ + -D__MBED__=1 + +OBJECTS += \ + $(OBJDIR)/libraries/USBDevice/USBDevice/USBHAL_LPC11U.o \ + $(OBJDIR)/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/startup_LPC11xx.o \ + $(OBJDIR)/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/cmsis_nvic.o \ + $(OBJDIR)/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/system_LPC11Uxx.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/PeripheralPins.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/analogin_api.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/gpio_api.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/gpio_irq_api.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/i2c_api.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pinmap.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/port_api.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pwmout_api.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/serial_api.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/sleep.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/spi_api.o \ + $(OBJDIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/us_ticker.o + +INCLUDE_PATHS += \ + -I$(MBED_DIR)/libraries/mbed/targets \ + -I$(MBED_DIR)/libraries/mbed/targets/cmsis \ + -I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_NXP \ + -I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX \ + -I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM \ + -I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/TARGET_LPC11U35_501 \ + -I$(MBED_DIR)/libraries/mbed/targets/hal \ + -I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_NXP \ + -I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX \ + -I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501 \ + -I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/TARGET_LPC11U35_501 + +LINKER_SCRIPT = $(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/TARGET_LPC11U35_501/LPC11U35.ld diff --git a/tmk_core/tool/mbed/mbed.mk b/tmk_core/tool/mbed/mbed.mk new file mode 100644 index 000000000..2657a0fd3 --- /dev/null +++ b/tmk_core/tool/mbed/mbed.mk @@ -0,0 +1,85 @@ +# based on Makefile exported form mbed.org +# see http://mbed.org/handbook/Exporting-to-GCC-ARM-Embedded + +OBJECTS += \ + $(OBJDIR)/libraries/mbed/common/gpio.o \ + $(OBJDIR)/libraries/mbed/common/us_ticker_api.o \ + $(OBJDIR)/libraries/mbed/common/wait_api.o \ + $(OBJDIR)/libraries/USBDevice/USBDevice/USBDevice.o + + +# $(OBJDIR)/libraries/mbed/common/assert.o \ +# $(OBJDIR)/libraries/mbed/common/board.o \ +# $(OBJDIR)/libraries/mbed/common/BusIn.o \ +# $(OBJDIR)/libraries/mbed/common/BusInOut.o \ +# $(OBJDIR)/libraries/mbed/common/BusOut.o \ +# $(OBJDIR)/libraries/mbed/common/CallChain.o \ +# $(OBJDIR)/libraries/mbed/common/CAN.o \ +# $(OBJDIR)/libraries/mbed/common/error.o \ +# $(OBJDIR)/libraries/mbed/common/Ethernet.o \ +# $(OBJDIR)/libraries/mbed/common/exit.o \ +# $(OBJDIR)/libraries/mbed/common/FileBase.o \ +# $(OBJDIR)/libraries/mbed/common/FileLike.o \ +# $(OBJDIR)/libraries/mbed/common/FilePath.o \ +# $(OBJDIR)/libraries/mbed/common/FileSystemLike.o \ +# $(OBJDIR)/libraries/mbed/common/FunctionPointer.o \ +# $(OBJDIR)/libraries/mbed/common/gpio.o \ +# $(OBJDIR)/libraries/mbed/common/I2C.o \ +# $(OBJDIR)/libraries/mbed/common/I2CSlave.o \ +# $(OBJDIR)/libraries/mbed/common/InterruptIn.o \ +# $(OBJDIR)/libraries/mbed/common/InterruptManager.o \ +# $(OBJDIR)/libraries/mbed/common/LocalFileSystem.o \ +# $(OBJDIR)/libraries/mbed/common/mbed_interface.o \ +# $(OBJDIR)/libraries/mbed/common/pinmap_common.o \ +# $(OBJDIR)/libraries/mbed/common/RawSerial.o \ +# $(OBJDIR)/libraries/mbed/common/retarget.o \ +# $(OBJDIR)/libraries/mbed/common/rtc_time.o \ +# $(OBJDIR)/libraries/mbed/common/semihost_api.o \ +# $(OBJDIR)/libraries/mbed/common/SerialBase.o \ +# $(OBJDIR)/libraries/mbed/common/Serial.o \ +# $(OBJDIR)/libraries/mbed/common/SPI.o \ +# $(OBJDIR)/libraries/mbed/common/SPISlave.o \ +# $(OBJDIR)/libraries/mbed/common/Stream.o \ +# $(OBJDIR)/libraries/mbed/common/Ticker.o \ +# $(OBJDIR)/libraries/mbed/common/Timeout.o \ +# $(OBJDIR)/libraries/mbed/common/TimerEvent.o \ +# $(OBJDIR)/libraries/mbed/common/Timer.o \ +# $(OBJDIR)/libraries/mbed/common/us_ticker_api.o \ +# $(OBJDIR)/libraries/mbed/common/wait_api.o \ +# $(OBJDIR)/libraries/USBDevice/USBAudio/USBAudio.o \ +# $(OBJDIR)/libraries/USBDevice/USBDevice/USBDevice.o \ +# $(OBJDIR)/libraries/USBDevice/USBDevice/USBHAL_KL25Z.o \ +# $(OBJDIR)/libraries/USBDevice/USBDevice/USBHAL_LPC11U.o \ +# $(OBJDIR)/libraries/USBDevice/USBDevice/USBHAL_LPC17.o \ +# $(OBJDIR)/libraries/USBDevice/USBDevice/USBHAL_LPC40.o \ +# $(OBJDIR)/libraries/USBDevice/USBDevice/USBHAL_RZ_A1H.o \ +# $(OBJDIR)/libraries/USBDevice/USBDevice/USBHAL_STM32F4.o \ +# $(OBJDIR)/libraries/USBDevice/USBHID/USBHID.o \ +# $(OBJDIR)/libraries/USBDevice/USBHID/USBKeyboard.o \ +# $(OBJDIR)/libraries/USBDevice/USBHID/USBMouseKeyboard.o \ +# $(OBJDIR)/libraries/USBDevice/USBHID/USBMouse.o \ +# $(OBJDIR)/libraries/USBDevice/USBMIDI/USBMIDI.o \ +# $(OBJDIR)/libraries/USBDevice/USBMSD/USBMSD.o \ +# $(OBJDIR)/libraries/USBDevice/USBSerial/USBCDC.o \ +# $(OBJDIR)/libraries/USBDevice/USBSerial/USBSerial.o + +INCLUDE_PATHS += \ + -I$(MBED_DIR)/libraries/mbed \ + -I$(MBED_DIR)/libraries/mbed/api \ + -I$(MBED_DIR)/libraries/mbed/common \ + -I$(MBED_DIR)/libraries/mbed/hal \ + -I$(MBED_DIR)/libraries/USBDevice \ + -I$(MBED_DIR)/libraries/USBDevice/USBAudio \ + -I$(MBED_DIR)/libraries/USBDevice/USBDevice \ + -I$(MBED_DIR)/libraries/USBDevice/USBHID \ + -I$(MBED_DIR)/libraries/USBDevice/USBMIDI \ + -I$(MBED_DIR)/libraries/USBDevice/USBMSD \ + -I$(MBED_DIR)/libraries/USBDevice/USBSerial + +# TMK mbed protocol +OBJECTS += \ + $(OBJDIR)/protocol/mbed/mbed_driver.o \ + $(OBJDIR)/protocol/mbed/HIDKeyboard.o + +INCLUDE_PATHS += \ + -I$(TMK_DIR)/protocol/mbed |