aboutsummaryrefslogtreecommitdiffstats
path: root/common_features.mk
AgeCommit message (Collapse)Author
2020-03-07Backlight - Carve out a better location for private driver functionality (#8329)Gravatar Joel Challis
* rename backlight_soft to match rules.mk * rename backlight_soft to match rules.mk - update common_features * Carve out a better location for private driver backlight functionality
2020-03-06Remove unused LED_BREATHING_TABLEGravatar zvecr
2020-02-292020 February 29 Breaking Changes Update (#8064)Gravatar James Young
2020-02-04Relocate grave keycode processing (#8082)Gravatar Joel Challis
* Relocate grave keycode processing * Tidy up code * Refactor grave -> grave_esc
2020-01-27Merge pull request #7995 from zvecr/feature/split_arm_i2c_removeGravatar Joel Challis
Remove compilation of i2c for arm split
2020-01-27Fix boards which were overriding backlight without setting custom (#7970)Gravatar Joel Challis
2020-01-24Remove compilation of i2c for arm splitGravatar zvecr
2020-01-24Update split serial code to use driver pattern (#7990)Gravatar Joel Challis
* Move avr serial code to drivers * Update src+= serial.c to driver pattern
2020-01-24Add customisable EEPROM driver selection (#7274)Gravatar Nick Brassel
- uprintf -> dprintf - Fix atsam "vendor" eeprom. - Bump Kinetis K20x to 64 bytes, too. - Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value. - Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage. - Add 24LC128 by request.
2020-01-17switching to you know whats up mode (#7921)Gravatar Jeremy Bernhardt
2020-01-15Add ws2812 driver type define (#7888)Gravatar Joel Challis
2020-01-13Relocate common backlight functionally (#7273)Gravatar Joel Challis
2020-01-04Move some common matrix code to a common location (#7699)Gravatar Joel Challis
* Move some common matrix code to a common location * Refactor some 'custom_matrix_helper' logic to use custom matrix lite * Fix build for kinesis/stapelberg - abuse of vpath was picking up matrix.c from core when custom matrix was enabled * Add validation for CUSTOM_MATRIX
2020-01-03VIA Configurator Refactor (#7268)Gravatar Wilba
* VIA Refactor * Remove old code * review changes * review changes * Fix cannonkeys/satisfaction75/prototype:via build * Add via.h to quantum.h * Move backlight init to after backlight config load * Merge branch 'master' into via_refactor_pr * Update user's rules.mk to new way of enabling VIA * Added id_switch_matrix_state * Review changes
2019-12-16Relocate RGB keycode processing (#7508)Gravatar Joel Challis
* Move rgb keycode logic to process_keycode * Fixes for rgb matrix * Fixes for mxss * Fix inc/dec logic, add comments * Fix return RAINBOW_SWIRL logic * stop external use of rgb helper functions * merge fix * Fix 'defined but not used' when all animations are disabled
2019-12-14Convert backlight to follow driver rules patternGravatar zvecr
2019-12-03Relocate magic keycode processing (#7512)Gravatar Joel Challis
* Move magic keycode processing to own file * Save some bytes * Update comments * Update define to one thats not already used... * Fix audio
2019-11-04[Core] Convert Dynamic Macro to a Core Feature (#5948)Gravatar Drashna Jaelre
* Convert Dynamic Macro to a Core Feature This imports the code from Dynamic Macro into the core code, and handles it, as such. This deprecates the old method but does not remove it, for legacy support. This way, no existing user files need to be touched. Additionally, this reorganizes the documentation to better reflect the changes. Also, it adds user hooks to the feature so users can customize the existing functionality. Based heavily on and closes #2976 * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com> Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Cleanup based on feedback * Add short-form keycodes and document them - add short-form keycodes to quantum/quantum_keycodes.h - document the new aliases in docs/feature_dynamic_macros.md * Add Dynamic Macros section and keycodes to docs/keycodes.md * Make anti-nesting optional * Add documentation for DYNAMIC_MACRO_NO_NESTING option * Fix Merge artifacts * Fix formatting typo in docs Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Remove DYNAMIC_MACRO_RANGE as it's not needed * Fix includes and layer var type
2019-11-02Initial migration of software PWM backlight (#6709)Gravatar Joel Challis
* Initial migration of software PWM backlight * First pass at backlight driver docs * Correct driver name in docs * Run backlight_task when using BACKLIGHT_PINS * Resolve backlight docs TODOs
2019-10-29 Refactor ps2avrgb i2c ws2812 to core (#7183)Gravatar Joel Challis
* Refactor ps2avrgb i2c ws2812 to core * Refactor jj40 to use ws2812 i2c driver * Refactor ps2avrgb template to use ws2812 i2c driver * Add ws2812 stub files * clang-format and driver config * Add ws2812 driver docs * Fix default config values * Update tmk_core/protocol/vusb/main.c Co-Authored-By: Drashna Jaelre <drashna@live.com>
2019-10-17Move tmk_core/common/backlight to quantum/backlight (#6710)Gravatar Joel Challis
* Move tmk_core/common/backlight to quantum/backlight * Add guards to backlight inclusion * Add guards to backlight inclusion * Update backlight guards on clueboard/60 * Use full paths to avoid vpath issues
2019-10-05ARM - Initial backlight support (#6487)Gravatar Joel Challis
* Move AVR backlight to own file, add borrowed ARM implementation * Tiny fix for backlight custom logic * Remove duplicate board from rebase * Fix f303 onekey example * clang-format * clang-format * Remove backlight keymap debug * Initial pass of ARM backlight docs * Initial pass of ARM backlight docs - resolve todos * fix rules validation logic * Add f072 warning * Add f072 warning * tidy up breathing in backlight keymap * tidy up breathing in backlight keymap * add missing break to backlight keymap
2019-09-14Fix enables for Haptic Feedback (#6707)Gravatar Drashna Jaelre
* Fix enables for Haptic Feedback If you enabled bothe DRV2605 and SOLENOID, it would only enable one of these, not both. This fixes the check so that you can enable both options. * Fix check for haptic feature
2019-09-03Add Dip Switch as a core feature (#6140)Gravatar Drashna Jaelre
* Add Dip Switches as a core feature * Add documentation for Dip Switch feature * Update Preonic Rev3 to use new feature and remove custom matrix * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Remove custom matrix line completely Rather than just disabling it Co-Authored-By: fauxpark <fauxpark@gmail.com> * DIP changes Co-Authored-By: fauxpark <fauxpark@gmail.com> * Use better check for DIP Switch configuration * Add to show features * Add bitmask callback for dip switch * Fix OLKB Boards dip switch config * Update docs to include bitmask example * Fix comments/documentation Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix issues with docs and use example from @tuzonghua * Fix wording Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix example to use proper formatting Bad, BAAAAAAD drashna!!! * Handle dip switch initialization better
2019-07-09Use QUANTUM_LIB_SRC for i2c_master.c inclusion (#5617)Gravatar Drashna Jaelre
Using QUANTUM_LIB_SRC prevents the warning when multiple sources add the i2c_master.c file. Boards such as the Ergodox EZ Glow see this warning every time they compile because the board uses the file in general, and because the RGB LED Matrix requires it, as well.
2019-05-01rgblight 255 hue (#5547)Gravatar XScorpion2
2019-04-29Simple extended space cadet (#5277)Gravatar XScorpion2
* Simplifying and Extending Space Cadet to work on Ctrl and Alt keys * PR Review feedback * Reverting back to keycodes
2019-04-29RGB Matrix: Custom effects on a kb/user level (#5338)Gravatar Daniel Prilik
* Revamped custom effects approach See docs for example usage * push-up RGB Matrix default mode Override default effect using RGB_MATRIX_STARTUP_MODE. Useful on boards without EEPROM support (*cough* Massdrop ALT/CTRL *cough*) * update docs
2019-04-20OLED Driver FeatureGravatar Ryan Caltabiano
2019-04-19Change split_common to use RGBLIGHT_SPLIT (#5509)Gravatar Takeshi ISHII
* add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-14Features/ws2812 matrix driver (#5418)Gravatar XScorpion2
* WS2812 driver implementation for RGB Matrix * Added driver configuration docs
2019-04-08Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes (#5532)Gravatar Jack Humbert
* RGB Matrix overhaul Breakout of animations to separate files Integration of optimized int based math lib Overhaul of rgb_matrix.c and animations for performance * Updating effect function api for future extensions * Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary * Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain * Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes * fix bug in quantum/rgb_matrix_drivers.c Co-Authored-By: jackhumbert <jack.humb@gmail.com> * update command setting to the correct default * correct rgb config * remove commented-out lines * update docs for the 3737 * Update docs/feature_rgb_matrix.md Co-Authored-By: jackhumbert <jack.humb@gmail.com>
2019-03-12Next set of split_common changes (#4974)Gravatar James Churchill
* Update split_common to use standard i2c drivers * Eliminate RGB_DIRTY/BACKLIT_DIRTY * Fix avr i2c_master error handling * Fix i2c_slave addressing * Remove unneeded timeout on i2c_stop() * Fix RGB I2C transfers * Remove incorrect comment
2019-03-04Clean up debounce a bit (#5255)Gravatar James Churchill
2019-02-21Velocikey: Match RGB animation speed to typing speed (#3754)Gravatar Chris Lewis
* Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Experimental LED support (untested) * Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Added documentation * Renamed feature to velocikey * Reverted readme to original state * Correct the readme title * Updated feature name in the docs * Update EECONFIG name * Add compile-time toggles for velocikey * Update feature documentation * Revert "Merge branch 'led-support' into master" This reverts commit e123ff5febf61639b9a9020748e1c2e2313460ff, reversing changes made to df111a55b9d4929182e16108b1c0ead15b16df97. * Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE * Rename decay_task function to decelerate * Apply suggestions from code review Co-Authored-By: chrislewisdev <chris@chrislewisdev.com> * Re-order eeconfig definitions * Apply coding conventions * Apply #ifdef check in lufa.c * Refactored interval time checks into one functionc * Small rename * Fix unused function error for layouts not using all rgb effects * Only update EEPROM if Velocikey is enabled * Incorporate code review feedback * Small adjustment to top-end decay rate * Add Velocikey documentation to table of contents * Bring tetris:default keymap size down by disabling audio
2019-02-16Haptic feedback generalized - DRV2605 and solenoids (#4939)Gravatar ishtob
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards * Haptic feedback enhancements: on/off toggle working, feedback order working todo: -work on modes switching -get modes switching to save to eeprom * haptic enhancement - eeprom and modes added * Added set and get functions for haptic feedback * initial implementation of solenoids under haptic feedback * changed eeprom to 32 bits to reserve blocks for future features * start documentation of haptic feedback * change keycode per comment from reviewers * typo fixes * added eeprom for solenoid configs * added solenoid and docs * Add/fix default parameters configs, improve docs * more doc cleanup * add in solenoid buzz toggle, clean up doc * some fixes for error in compiling solenoid * fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c * fixes for avr side issues * update keymap * fix keymap compile error * fix bugs found during solenoid testing * set pin that is not powered during bootloader * added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
2019-02-14Debounce refactor / API (#3720)Gravatar Drashna Jaelre
* Added xeal60 via clone of lets split * Delete removed other keymaps * Basic keymap (no FN). Compiles. * Removed NP_STAR and NP_SLSH. * Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes. * Changed order of rules in TMK. Documented feature. * Fixed missing whitespace in debounce documentation Table wasn't working due to missing newline. * Added bold in a few areas. * DO NOT USE - Removed debounce from TMK. * Remove accidental xeal60 commit * DO NOT USE - debounce successfully compiled. * DO NOT USE Revert back to original API to support split_keyboards. * Working eager_pk * Whitespace cleanup. * Restored debounce.h since there wasnt any real change. * Moved debouncing_time variable to inside #if debounce * Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used. * Removed #include "matrix.h" from debounce.h * Bug fix - was using MATRIX_ROWS instead of num_rows * Fixed compilation error with debounce_sym_g * Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE * Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2. * Fix compile error in debounce_eager_pk * Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
2019-02-10Force backlight on when led matrix is enabledGravatar skullY
2019-02-10led_matrix works nowGravatar skullY
2019-02-10The beginning of a simple led matrix driver for is31fl3731Gravatar skullY
2019-01-27Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup ↵Gravatar alex-ong
debounce_type.mk
2019-01-26Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPEGravatar Alex Ong
2019-01-26Removed check for custom_matrix. We can safely include the debounce file for ↵Gravatar alex-ong
compilation when custom_matrix is used.
2019-01-26Whitespace cleanup.Gravatar alex-ong
2019-01-26DO NOT USE - debounce successfully compiled.Gravatar alex-ong
2019-01-17Simplify split_common Code significantly (#4772)Gravatar James Churchill
* Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-13Change handling of CUSTOM_MATRIX in common_features.mk slightly.Gravatar mtei
2018-12-31Move Split Common VPATH addition (#4716)Gravatar Drashna Jaelre
Specifically, only add the split_common folder to COMMON_VPATH if the feature is eanbled, to prevent issues with compilation
2018-12-24Replace serial.c of quantum/split_common/ (#4669)Gravatar Takeshi ISHII
* Add provisional Helix implementation to test the quantum/split_common. * copy keyboards/helix/serial.[ch] to quantum/split_common/ * Make serial.c a pure driver. Remove buffer name and buffer size from serial.c. They should be placed in the caller(matrix.c, split_utils.c). * remove quantum/split_common/serial_backward_compatibility.h * Changed array serial_master_buffer to structure serial_m2s_buffer. * Changed array serial_slave_buffer to structure serial_s2m_buffer. * Change keyboards/miniaxe/matrix.c I also made changes to quantum/split_comon/matrix.c to keyboards/miniaxe/matrix.c. Note: I contacted @ka2hiro, creator of miniaxe, and I got permission to change keyboards/miniaxe/matrix.c. * update history comment in quantum/split_common/serial.c * Revert "Add provisional Helix implementation to test the quantum/split_common." This reverts commit 168c82ef82c88e79979d9796bab9cc819cc2f685. * fix keyboards/miniaxe/matrix.c, quantum/split_common/matrix.c avr-gcc 4.9.[23] report error. avr-gcc 5.4.0, avr-gcc 7.3.0 pass. It is funny. * update comment quantum/split_common/serial.c * Reserve RGBLIGHT_SPLIT macro in quantum/split_common
2018-12-14Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522)Gravatar Takeshi ISHII
* add temporary compile test shell script * Extended support of SKIP_VERSION to make invariant compile results during testing. * build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support Support compiled object enclosed in library. e.g. ``` LIB_SRC += xxxx.c xxxx.c --> xxxx.o ---> xxxx.a ``` * remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c * add SKIP_DEBUG_INFO into tmk_core/rules.mk When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time. * tmk_core/rules.mk: Library object need -fno-lto * add SKIP_DEBUG_INFO=yes * remove temporary compile test shell script * add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h * quantum/split_common/serial.c: Changed not to use USE_I2C.
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-25 14:36:39 +0000