aboutsummaryrefslogtreecommitdiffstats
path: root/docs/_summary.md
AgeCommit message (Collapse)Author
2020-04-19Add a syllabus to guide people who are learning QMK (#8816)Gravatar skullydazed
2020-04-13Add support for hardware and board initialisation overrides. (#8330)Gravatar Nick Brassel
* Add support for hardware and board initialisation overrides. * qmk cformat. * Add some documentation. * Docs clarity. * Make early_hardware_init_pre a no-op for now, until migrations occur. * Doco update * Make distinction between keyboard and ChibiOS board in docs * Doc anchors. * Update tmk_core/protocol/chibios/main.c Co-Authored-By: Joel Challis <git@zvecr.com> * Rework bootloader entry to be off by default, allow opting-in. Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-08spi_master for AVR (#8299)Gravatar Ryan
* Change _delay_ms/us() to wait_ms/us() * Switch to platform-agnostic GPIO macros * Add AVR spi_master and migrate Adafruit BLE code * Set verbose back to false * Add clock divisor, bit order and SPI mode configuration for init * Add start and stop functions * Move configuration of mode, endianness and speed to `spi_start()` * Some breaks here would be good * Default Adafruit BLE clock divisor to 4 (2MHz on the Feather 32U4) * Remove mode and divisor enums * Add some docs * No hr at EOF * Add links in sidebar
2020-03-23Add Word Per Minute calculation feature (#8054)Gravatar brickbots
* Add Word Per Minute calculation feature * Fix copyright info * Remove header from quantum.c, setup overloadable keycode inclusion for WPM, update docs * Simplify logic for keycode filtering * Adding link from summary to wpm_feature info * Update docs/feature_wpm.md Typo in function prototype example in docs Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Add WPM transport via i2c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-03-21[Docs] Update layer documentation (#8371)Gravatar Drashna Jaelre
* [Docs] Update layer documentation * Add layer_state_cmp functions * Fix cut/copy/paste issue * Add id tags * Apply noroads corrections * Move Layers section to separate document * Fix ID tag for layers * Use better name for summary/side bar * Fix feature page linkage As well as a small spell error close by * Remove paper analogy for now
2020-03-15Fix some broken links in the docs (#8394)Gravatar skullydazed
* fix some broken links * remove duplicate and confusing material from cli.md * Switch brazil to the 2 letter country code * Update docs/_langs.md Co-Authored-By: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-05link the 2020 Feb 29 Breaking Changes changelog from the summaryGravatar James Young
2020-03-05make sure all our redirects are in orderGravatar skullY
2020-03-05split Hand Wire Preamble to a separate docGravatar James Young
2020-03-05rearrange the sidebar a bitGravatar skullY
2020-03-05make custom_keycode_names.md a faq entry insteadGravatar skullY
2020-03-05break feature_advanced_keycodes.md up into multiple filesGravatar skullY
2020-03-05improve our docsify setupGravatar skullY
2020-03-05overhaul the newbs guideGravatar skullY
2020-03-05More sidebar organizationGravatar skullY
2020-03-05Add API documentationGravatar skullY
2020-03-05Rework the newbs guide around the qmk cliGravatar skullY
2020-03-05_summary.md: move Auto Shift page to Software Features categoryGravatar James Young
2020-03-05rework the index pageGravatar skullY
2020-03-05more wipGravatar skullY
2020-03-05wipGravatar skullY
2020-01-25change Instructions listing in Docs summaryGravatar James Young
2020-01-25add Breaking Change PR Instructions docGravatar James Young
2020-01-24Add customisable EEPROM driver selection (#7274)Gravatar Nick Brassel
- uprintf -> dprintf - Fix atsam "vendor" eeprom. - Bump Kinetis K20x to 64 bytes, too. - Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value. - Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage. - Add 24LC128 by request.
2020-01-18Add docs for 'CUSTOM_MATRIX = lite' (#7906)Gravatar Joel Challis
* Add some docs to cover 'CUSTOM_MATRIX = lite' * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com> * Add 'SRC += matrix.c' docs * Update docs/custom_matrix.md Co-Authored-By: fauxpark <fauxpark@gmail.com> Co-authored-by: fauxpark <fauxpark@gmail.com>
2019-12-08Improve support and docs for ADC driver (#7191)Gravatar fauxpark
* Improve support and docs for ADC driver * Comment ADC channels * Move to Makers and Modders section, and fix usage instructions * Flesh out intro * Superscript 328P note * Fix pin_to_mux LUT * Support USB64/1287 as well * analogReadPin() defaults to 0V mux on invalid pin * Update pinToMux() function documentation * Dot * Accept (some of) the `qmk cformat` changes * Do clang-format properly * More wording tweaks * Link to encoder docs
2019-12-02[Docs] Restructure of Git Best Practices doc (#7231)Gravatar James Young
* Add "Resynchronizing an Out-of-Sync Git Branch" doc * Update (Git) Best Practices doc title and filename * Rename Branch Resync doc * fork Best Practices doc into multiple files * Add the doc list to Git Best Practices doc * Update sidebar * Update internal references * Update sidebar - add subsection * Update Your Fork's Master page title * title case on Git Best Practices main doc * ... and in the Resynchronizing a Branch doc * Please read Part 1 I worked really hard on this, okay? * Please use branches, too. * suggestions by mtei * change note about adding multiple files * note that the name given the remote repo is arbitrary * suggestions by fauxpark * Git Best Practices -> Best Git Practices Reads more naturally. * rephrase hint block regarding remote name * rework the resynchronization instructions per mtei * use hint boxes for reference to Part 1 doc I may be addicted to hint boxes. I'm sorry fauxpark. :cry: * add some clarity about the upstream repo * wordsmithing per mtei * restyle the shell code blocks Makes them more consistent to the other docs in this section.
2019-11-23Set up language fallback for docs, and update translation guidelines (#7403)Gravatar fauxpark
* Set up language fallback for docs, and update translation guidelines * Title Case * Add ID example * Link to emoji flag cheatsheet * Move docs preview section to contributing.md * Point to docs preview in the readme
2019-11-08[Doc] Tidy up compatible MCUs docs (#7295)Gravatar fauxpark
* Tidy up compatible MCUs docs * ARM chips should have USB * 32KB soft lower limit applies to ARM as well * NXP is the manufacturer name, not Kinetis * Units
2019-10-29 Refactor ps2avrgb i2c ws2812 to core (#7183)Gravatar Joel Challis
* Refactor ps2avrgb i2c ws2812 to core * Refactor jj40 to use ws2812 i2c driver * Refactor ps2avrgb template to use ws2812 i2c driver * Add ws2812 stub files * clang-format and driver config * Add ws2812 driver docs * Fix default config values * Update tmk_core/protocol/vusb/main.c Co-Authored-By: Drashna Jaelre <drashna@live.com>
2019-10-01Expose zh-cn docs, delete bad zh docs, add docs for adding translations (#6855)Gravatar Jack Humbert
* expose zh-cn docs, delete bad zh docs, add docs for adding translations * Update docs/translating.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/translating.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * update for python 3
2019-09-22Configuration system for CLI (#6708)Gravatar skullydazed
* Rework how bin/qmk handles subcommands * qmk config wip * Code to show all configs * Fully working `qmk config` command * Mark some CLI arguments so they don't pollute the config file * Fleshed out config support, nicer subcommand support * sync with installable cli * pyformat * Add a test for subcommand_modules * Documentation for the `qmk config` command * split config_token on space so qmk config is more predictable * Rework how subcommands are imported * Document `arg_only` * Document deleting from CLI * Document how multiple operations work * Add cli config to the doc index * Add tests for the cli commands * Make running the tests more reliable * Be more selective about building all default keymaps * Update new-keymap to fit the new subcommand style * Add documentation about writing CLI scripts * Document new-keyboard * Update docs/cli_configuration.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/cli_development.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/cli_development.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/cli_development.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Address yan's comments. * Apply suggestions from code review suggestions from @noahfrederick Co-Authored-By: Noah Frederick <code@noahfrederick.com> * Apply suggestions from code review Co-Authored-By: Noah Frederick <code@noahfrederick.com> * Remove pip3 from the test runner
2019-09-03Add Dip Switch as a core feature (#6140)Gravatar Drashna Jaelre
* Add Dip Switches as a core feature * Add documentation for Dip Switch feature * Update Preonic Rev3 to use new feature and remove custom matrix * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Remove custom matrix line completely Rather than just disabling it Co-Authored-By: fauxpark <fauxpark@gmail.com> * DIP changes Co-Authored-By: fauxpark <fauxpark@gmail.com> * Use better check for DIP Switch configuration * Add to show features * Add bitmask callback for dip switch * Fix OLKB Boards dip switch config * Update docs to include bitmask example * Fix comments/documentation Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix issues with docs and use example from @tuzonghua * Fix wording Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix example to use proper formatting Bad, BAAAAAAD drashna!!! * Handle dip switch initialization better
2019-08-30Merge point for 2019 Aug 30 Breaking ChangeGravatar skullY
2019-08-23Add Zadig 101 to docs (#6585)Gravatar fauxpark
* Add Zadig 101 to docs * Add USBasp bootloader name * Add links to the page * Note the usual VIDs and PIDs for the bootloaders * Add "List All Devices" note, just in case * Talk about keyboard-specific bootloader procedures * Send users to the new page in "Unknown Device for DFU Bootloader" section * Halfkay bootloaders are also an exception here
2019-07-15[Docs] Add dedicated page for Split Keyboard information (#5802)Gravatar Drashna Jaelre
* [Docs] Add dedicated page for Split Keyboard information * Apply suggestions from code review Co-Authored-By: drashna <drashna@live.com> * Fix Typos Co-Authored-By: drashna <drashna@live.com> * Fix some formatting issues * Add Additional RGB info * Fix Bulletted formatting * Apply suggestions from code review Co-Authored-By: drashna <drashna@live.com> * Fix line wrapping * Additional fixes and expansion * Reword warning/note Co-Authored-By: drashna <drashna@live.com> * add i2c/serial coexistance info * i2c markdown * Change i2c wiring text Co-Authored-By: drashna <drashna@live.com>
2019-07-15QMK CLI and JSON keymap support (#6176)Gravatar skullydazed
* Script to generate keymap.c from JSON file. * Support for keymap.json * Add a warning about the keymap.c getting overwritten. * Fix keymap generating * Install the python deps * Flesh out more of the python environment * Remove defunct json2keymap * Style everything with yapf * Polish up python support * Hide json keymap.c into the .build dir * Polish up qmk-compile-json * Make milc work with positional arguments * Fix a couple small things * Fix some errors and make the CLI more understandable * Make the qmk wrapper more robust * Add basic QMK Doctor * Clean up docstrings and flesh them out as needed * remove unused compile_firmware() function
2019-05-22Additional link fixesGravatar Drashna Jaelre
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-05-22Fix linksGravatar Drashna Jaelre
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-05-21Add missing links to features page and sidebar sectionGravatar Drashna Jaelre
2019-04-30Added OLED Driver to the summaryGravatar Ryan Caltabiano
2019-04-29Simple extended space cadet (#5277)Gravatar XScorpion2
* Simplifying and Extending Space Cadet to work on Ctrl and Alt keys * PR Review feedback * Reverting back to keycodes
2019-03-18[Docs] Smallish overhaul of the docs (#5281)Gravatar Drashna Jaelre
* Fix up Common functions doc * Add to extra commands to flashing doc * Rearrange and touch up Macros * Expand Newbs Flashing guide * Update process_record documentation * Add git to best practices name in sidebar * Expand FAQ for build/flashing * Add deprecated info to functions * Update docs/feature_macros.md Co-Authored-By: drashna <drashna@live.com> * Update docs/feature_macros.md Co-Authored-By: drashna <drashna@live.com> * Update docs/flashing.md Co-Authored-By: drashna <drashna@live.com> * Update docs/flashing.md Co-Authored-By: drashna <drashna@live.com> * Update docs/keymap.md Co-Authored-By: drashna <drashna@live.com> * Update docs/newbs_flashing.md Co-Authored-By: drashna <drashna@live.com> * Update docs/newbs_flashing.md Co-Authored-By: drashna <drashna@live.com> * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Update docs/faq_build.md Co-Authored-By: drashna <drashna@live.com> * Update docs/feature_macros.md Co-Authored-By: drashna <drashna@live.com> * Update docs/keymap.md Co-Authored-By: drashna <drashna@live.com> * Fix up Common functions doc * Make pre-init example accurate * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Zadig Driver catchall * Spelling Depriciated * Completely remove fn_actions section
2019-03-15[Docs] Add VSCode guide to docs (#5124)Gravatar Drashna Jaelre
* Add VSCode guide to docs * Fix settings menu enumeration * Update docs/other_vscode.md Co-Authored-By: drashna <drashna@live.com> * Update docs/other_vscode.md Co-Authored-By: drashna <drashna@live.com> * Update docs/other_vscode.md Co-Authored-By: drashna <drashna@live.com> * Update docs/other_vscode.md Co-Authored-By: drashna <drashna@live.com> * Update docs/other_vscode.md Co-Authored-By: drashna <drashna@live.com>
2019-03-03Add LED Matrix to Features list for easy reference (#5280)Gravatar Drashna Jaelre
2019-02-21Velocikey: Match RGB animation speed to typing speed (#3754)Gravatar Chris Lewis
* Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Experimental LED support (untested) * Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Added documentation * Renamed feature to velocikey * Reverted readme to original state * Correct the readme title * Updated feature name in the docs * Update EECONFIG name * Add compile-time toggles for velocikey * Update feature documentation * Revert "Merge branch 'led-support' into master" This reverts commit e123ff5febf61639b9a9020748e1c2e2313460ff, reversing changes made to df111a55b9d4929182e16108b1c0ead15b16df97. * Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE * Rename decay_task function to decelerate * Apply suggestions from code review Co-Authored-By: chrislewisdev <chris@chrislewisdev.com> * Re-order eeconfig definitions * Apply coding conventions * Apply #ifdef check in lufa.c * Refactored interval time checks into one functionc * Small rename * Fix unused function error for layouts not using all rgb effects * Only update EEPROM if Velocikey is enabled * Incorporate code review feedback * Small adjustment to top-end decay rate * Add Velocikey documentation to table of contents * Bring tetris:default keymap size down by disabling audio
2019-02-08Address comments in #4832. Move info.json reference to its own file.Gravatar skullY
2019-01-10Adds Proton C Conversion (#4661)Gravatar Jack Humbert
* adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2018-12-07Add support for PR and Issue templates to QMK_firmware GitHub (#4494)Gravatar Drashna Jaelre
* Add support document * Add Bug Report * Add GitHub Pull Request Template * Feature request issue template * Touch up feature request template * Add 'other issues' template * move support doc * Minor tweaks * More minor tweaks * Spleeling fix Co-Authored-By: drashna <drashna@live.com> * CapiTALization fIXes Co-Authored-By: drashna <drashna@live.com> * Use new issue URL Co-Authored-By: drashna <drashna@live.com> * Add blanck issue template * Update the PR template * Formatting and additional changes * Update docs/support.md Co-Authored-By: drashna <drashna@live.com>
2018-12-05Re-order feature list in sidebar (#4555)Gravatar Drashna Jaelre
Specifically, moved the shifted keycodes to the top of the 'Feature' list, so it's more visible. This way, all of the keycodes are at the top of the list, rather than having the shifted keys at the bottom, so they should be easier to find since they're all in one place.
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-27 22:04:59 +0000