aboutsummaryrefslogtreecommitdiffstats
path: root/tmk_core/protocol
AgeCommit message (Collapse)Author
2020-04-13Fix AVR SPI parameter configuration, remove timeouts due to sync protocol. ↵Gravatar Nick Brassel
(#8775)
2020-04-13Add support for hardware and board initialisation overrides. (#8330)Gravatar Nick Brassel
* Add support for hardware and board initialisation overrides. * qmk cformat. * Add some documentation. * Docs clarity. * Make early_hardware_init_pre a no-op for now, until migrations occur. * Doco update * Make distinction between keyboard and ChibiOS board in docs * Doc anchors. * Update tmk_core/protocol/chibios/main.c Co-Authored-By: Joel Challis <git@zvecr.com> * Rework bootloader entry to be off by default, allow opting-in. Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-09Add PS2_MOUSE_ROTATE to compensate for device orientation (#8650)Gravatar Manna Harbour
* Add PS2_MOUSE_ROTATE to compensate for device orientation * fixup! Add PS2_MOUSE_ROTATE to compensate for device orientation * Reformat with IndentPPDirectives: AfterHash as per #6316
2020-04-08spi_master for AVR (#8299)Gravatar Ryan
* Change _delay_ms/us() to wait_ms/us() * Switch to platform-agnostic GPIO macros * Add AVR spi_master and migrate Adafruit BLE code * Set verbose back to false * Add clock divisor, bit order and SPI mode configuration for init * Add start and stop functions * Move configuration of mode, endianness and speed to `spi_start()` * Some breaks here would be good * Default Adafruit BLE clock divisor to 4 (2MHz on the Feather 32U4) * Remove mode and divisor enums * Add some docs * No hr at EOF * Add links in sidebar
2020-04-05format code according to conventions [skip ci]Gravatar QMK Bot
2020-04-05V-USB: Remove some stuff from usbconfig.h that should not be configurable ↵Gravatar Ryan
(#8656) * V-USB: Remove some stuff from usbconfig.h that should not be configurable * Clean up some ifdefs * And some more * Even more
2020-04-05V-USB remote wakeup (#7627)Gravatar Drashna Jaelre
* V-USB remote wakeup Backport from tmk/tmk_keyboard@391c979be751eaf113c8f53c36644a6bb6ff12f6 * Change vusb.c remote wake config as per fauxpark's suggestion
2020-04-01Strip out features to allow minimum firmware sizes (#8645)Gravatar Joel Challis
2020-04-01Updated V-USB template to allow usbFunctionWriteOut (#8634)Gravatar yiancar
2020-04-01Miscellaneous cleanups (#8639)Gravatar Ryan
* Miscellaneous cleanups * Cast NO_PIN
2020-03-31V-USB: Consolidate usbconfig.h's into a single file (#8584)Gravatar Ryan
2020-03-30add hid_raw feature to VUSB (#8380)Gravatar Takuya Urakawa
* rewrite usbhid feature on vusb * Apply suggestions from code review Co-Authored-By: Ryan <fauxpark@gmail.com> * fix typo * fix typo again * Update tmk_core/protocol/vusb/vusb.c Co-Authored-By: Ryan <fauxpark@gmail.com> * clean up defines Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-28V-USB: Use structs for USB descriptors (#8572)Gravatar Ryan
* V-USB: Use structs for USB descriptors * Update usbconfigs * cformat pass
2020-03-26Enable SLEEP_LED on ATmega32A (#8531)Gravatar Joel Challis
* Port over some AVR backlight logic to SLEEP_LED * Port over some AVR backlight logic to SLEEP_LED - add timer 3 * Port over some AVR backlight logic to SLEEP_LED - clang format * Enable SLEEP_LED within vusb protocol
2020-03-26V-USB: Use manufacturer and product strings from config.h (#7797)Gravatar Ryan
* V-USB: Use manufacturer and product strings from config.h * Update board configs
2020-03-26format code according to conventions [skip ci]Gravatar QMK Bot
2020-03-26Add RawHID support to ATSAM (Massdrop boards) (#8530)Gravatar foxx1337
* Add support for RAW endpoint for arm_atsam This the excellent work from helluvamatt/qmk_firmware in bb6eeb93b. * Reformat arm_atsam RAW endpoint code Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>
2020-03-25Run clang-format manually to fix recently changed files (#8552)Gravatar Joel Challis
2020-03-16format code according to conventions [skip ci]Gravatar QMK Bot
2020-03-16Remove unnecessary import of rgblight.h in tmk_core/protocol/*/*.c (#8432)Gravatar Takeshi ISHII
* Remove unnecessary import of rgblight.h in tmk_core/protocol/*/*.c * tmk_core/protocol/chibios/main.c * tmk_core/protocol/lufa/lufa.c see #8380 for tmk_core/protocol/vusb/main.c. * Remove '#include "rgblight.h"' from tmk_core/protocol/vusb/main.c.
2020-03-10Refactor rgblight_reconfig.h (#7773)Gravatar Takeshi ISHII
* Moved contents of rgblight_reconfig.h to rgblight_post_config.h. In #3582, rgblight_reconfig.h had to be newly created. Now, the build system of qmk_firmware has a post_cofig feature, so that what was done in rgblight_reconfig.h can now be realized in rgblight_post_config.h. **This commit does not change the build result.** Testing script ```shell # build on master git checkout master echo master > /tmp/master_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # build on refactor_rgblight_reconfig.h git checkout refactor_rgblight_reconfig.h echo refactor_rgblight_reconfig.h > /tmp/branch_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt diff -u /tmp/master_md5.txt /tmp/branch_md5.txt ``` Test result: ``` --- /tmp/master_md5.txt 2020-01-03 15:42:22.000000000 +0900 +++ /tmp/branch_md5.txt 2020-01-03 15:42:42.000000000 +0900 @@ -1,4 +1,4 @@ -master +refactor_rgblight_reconfig.h MD5 (helix_rev2_default.hex) = f360032edd522448366d471d8f4f8181 MD5 (helix_rev2_back_default.hex) = 0c663acc6cccc44476b3b969ad22a48f MD5 (helix_rev2_back_default.hex) = e66b1195ff6d38e6e22c975b8ae42fd3 ``` * Expressions that are too long are difficult to read, so wrap them. * Edit the expression again * remove `defined(RGBLIGHT_ANIMATIONS)` in `tmk_core/common/*/suspend.c`, `tmk_core/protocol/*/main.c` move contents of rgblight_reconfig.h to rgblight.h. The following changes were made to rgblight.h. ```diff +#ifdef RGBLIGHT_USE_TIMER void rgblight_task(void); void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); void rgblight_timer_toggle(void); +#else +#define rgblight_task() +#define rgblight_timer_init() +#define rgblight_timer_enable() +#define rgblight_timer_disable() +#define rgblight_timer_toggle() +#endif ``` The following changes were made to tmk_core/common/avr/suspend.c, tmk_core/common/chibios/suspend.c, tmk_core/protocol/chibios/main.c, tmk_core/protocol/lufa/lufa.c, tmk_core/protocol/vusb/main.c. ```diff -# ifdef RGBLIGHT_ANIMATIONS rgblight_timer_enable(); -# endif ``` ```diff -#if defined(RGBLIGHT_ANIMATIONS) && defined(RGBLIGHT_ENABLE) +#if defined(RGBLIGHT_ENABLE) rgblight_task(); #endif ``` * remove 'defined(RGBLIGHT_ANIMATIONS)' in tmk_core/common/keyboard.c Co-authored-by: Joel Challis <git@zvecr.com>
2020-02-292020 February 29 Breaking Changes Update (#8064)Gravatar James Young
2020-02-25Improvements to extrakey HID descriptors (#8156)Gravatar Ryan
2020-02-22Update main.c (#8198)Gravatar yiancar
2020-02-12format code according to conventions [skip ci]Gravatar QMK Bot
2020-02-12Align VUSB HID descriptors with LUFA/ChibiOS (#7675)Gravatar fauxpark
* Align VUSB HID descriptors with LUFA/ChibiOS * Wrap send_system and send_consumer in ifdefs too * Offset system usages to match LUFA/ChibiOS
2020-02-08Remove PJRC USB stackGravatar fauxpark
2020-02-04Add Midi Endpoint task to ChibiOS main (#8071)Gravatar Drashna Jaelre
2020-02-02format code according to conventions [skip ci]Gravatar QMK Bot
2020-02-02Dedupe extrakey report struct, and send functions in V-USB & LUFA (#7993)Gravatar fauxpark
* Dedupe extrakey report struct, and send functions in V-USB & LUFA * Doc comment for consistency * Wrap it in ifdef to prevent unused function error * Do the same for ATSAM
2020-02-02format code according to conventions [skip ci]Gravatar QMK Bot
2020-02-02Align ATSAM HID descriptors with LUFA/ChibiOS (#7651)Gravatar fauxpark
* Align ATSAM HID descriptors with LUFA/ChibiOS * Don't hardcode raw endpoint size
2020-01-31Improve VIRTSER performance (#7528)Gravatar xyzz
2020-01-25format code according to conventions [skip ci]Gravatar QMK Bot
2020-01-25Fix unaligned access with LTO (#7801)Gravatar George Harris
Forces 4 byte alignment for USB input & output buffers to prevent unaligned accesses by chibios with LTO enabled
2020-01-21format code according to conventions [skip ci]Gravatar QMK Bot
2020-01-21Fix lock LEDs for ChibiOS when using shared endpoints (#7877)Gravatar fauxpark
* Fix lock LEDs for ChibiOS when using shared endpoints * Tweak comments * Doesn't need to be uint16 anymore
2020-01-19Move rgblight and backlight task to common location (#7733)Gravatar Joel Challis
2020-01-13chibios/usb_main: re-check USB status in send_keyboard after sleeping the ↵Gravatar xyzz
thread (#7784) * chibios/usb_main: re-check USB status in send_keyboard after sleeping the thread * change send_keyboard to only have 1 exit point
2020-01-13Fix KEYBOARD_SHARED_EP on ChibiOS (#7860)Gravatar Joel Challis
2019-12-13remove SERIAL_SOFT_DEBUG macro (#7625)Gravatar Drashna Jaelre
SERIAL_SOFT_DEBUG can be defined in the `config.h` Backported from tmk/tmk_keyboard@c74eee6327c5995456ba004d70b9663cf485d9f8 x
2019-12-14Fix ChibiOS USB config for chips which support OTGv1 (#7564)Gravatar Joel Challis
* Align endpoint config as per rest of file (fixes #4783) * Add comments about explicit order use * Update tmk_core/protocol/chibios/usb_main.c Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-12-11Remove mbed files (#7605)Gravatar Joel Challis
* Remove mbed files * Remove mbed files - fix comment * Remove mbed logic blocks
2019-12-11Use `clock_prescale_set()` from avr-libc (#7540)Gravatar fauxpark
* Use `clock_prescale_set()` from avr-libc * Remove outdated FAQ info
2019-12-08Set proper ASCII character for KC_NUHS in iWRAP code (#7434)Gravatar fauxpark
2019-11-25Remove vusb 'reset to bootloader' hid message due to security implications ↵Gravatar Joel Challis
(#7456)
2019-11-17Run clang-format manually to fix recently changed filesGravatar zvecr
2019-11-15Add support for configurable polling interval and power usage o… (#7336)Gravatar fauxpark
* Add support for custom polling interval and power usage on V-USB boards * Use 1ms as default for now
2019-11-10Fix chibios when mouse and nkro disabled (#7312)Gravatar Joel Challis
2019-11-07ARM - ws2812 bitbang (#7173)Gravatar Joel Challis
* Initial ARM bitbang ws2812 driver * Unify chibios platform to run rgblight_task * Remove 'avr only' comments from ws2812 docs * Remove 'avr only' comments from ws2812 docs * Unify chibios platform to run rgblight_task - review comments * Remove debug flags from keymap * Add comments from review * Add defines for STM32L0XX * Attempt to get arm ws2812 working on multiple gcc versions
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-26 15:03:14 +0000