From ae44ec9820cdf5348e802c9bae3af34557617685 Mon Sep 17 00:00:00 2001
From: Joel Challis <git@zvecr.com>
Date: Fri, 23 Aug 2019 00:08:45 +0100
Subject: Align flashing behaviour of dfu-util (#6578)

* Align flashing retry logic of dfu-util

* Align bootloader wait messages

Co-Authored-By: Drashna Jaelre <drashna@live.com>
---
 docs/flashing.md    |  6 ++----
 tmk_core/chibios.mk | 22 ++++++----------------
 2 files changed, 8 insertions(+), 20 deletions(-)

diff --git a/docs/flashing.md b/docs/flashing.md
index 833b9dd62..d11dbdf15 100644
--- a/docs/flashing.md
+++ b/docs/flashing.md
@@ -171,7 +171,5 @@ Flashing sequence:
 
 There are a number of DFU commands that you can use to flash firmware to a STM32 device:
 
-* `:dfu-util` - The default command for flashing to STM32 devices. 
-* `:dfu-util-wait` - This works like the default command, but it gives you a (configurable) 10 second timeout before it attempts to flash the firmware.  You can use `TIME_DELAY=20` from the command line to change the timeout.
-   * Eg: `make <keyboard>:<keymap>:dfu-util TIME_DELAY=5`
-* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 
+* `:dfu-util` - The default command for flashing to STM32 devices.
+* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util.
diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk
index eee520467..4b5b6d00b 100644
--- a/tmk_core/chibios.mk
+++ b/tmk_core/chibios.mk
@@ -235,28 +235,18 @@ qmk: $(BUILD_DIR)/$(TARGET).bin
 	printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk
 
 define EXEC_DFU_UTIL
+	until $(DFU_UTIL) -l | grep -q "Found DFU"; do\
+		echo "Error: Bootloader not found. Trying again in 5s." ;\
+		sleep 5 ;\
+	done
 	$(DFU_UTIL) $(DFU_ARGS) -D $(BUILD_DIR)/$(TARGET).bin
 endef
 
 dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter
 	$(call EXEC_DFU_UTIL)
 
-ifneq ($(strip $(TIME_DELAY)),)
-  TIME_DELAY = $(strip $(TIME_DELAY))
-else
-  TIME_DELAY = 10
-endif
-dfu-util-wait: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter
-	echo "Preparing to flash firmware. Please enter bootloader now..." ;\
-  COUNTDOWN=$(TIME_DELAY) ;\
-  while [[ $$COUNTDOWN -ge 1 ]] ; do \
-        echo "Flashing in $$COUNTDOWN ..."; \
-        sleep 1 ;\
-        ((COUNTDOWN = COUNTDOWN - 1)) ; \
-  done; \
-  echo "Flashing $(TARGET).bin" ;\
-  sleep 1 ;\
-  $(call EXEC_DFU_UTIL)
+# Legacy alias
+dfu-util-wait: dfu-util
 
 st-link-cli: $(BUILD_DIR)/$(TARGET).hex sizeafter
 	$(ST_LINK_CLI) $(ST_LINK_ARGS) -q -c SWD -p $(BUILD_DIR)/$(TARGET).hex -Rst
-- 
cgit v1.2.3-70-g09d2