From 62ba66d61821fec6a5ad3bdccdf738e15e082461 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Fri, 10 May 2019 18:55:02 -0500 Subject: Cleanup/rgb matrix (#5811) * clean up rgb matrix extern usage Moved rgb matrix boiler plate into macros Rebased onto typing heatmap pr * Fixing the reversed frame buffer access in digital rain * Fixing digital rain & typing heatmap if keyreactive effects are not enabled * Apply suggestions from code review Co-Authored-By: Drashna Jaelre * Adding parenthesizes to DRIVER_LED_TOTAL where necessary * Updated docs * added notes about parentheses --- docs/feature_rgb_matrix.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 1e4341467..e29433a4b 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -30,9 +30,11 @@ Configure the hardware via your `config.h`: #define DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 25 #define DRIVER_2_LED_TOTAL 24 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) ``` +!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`. + Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations. Define these arrays listing all the LEDs in your `.c`: -- cgit v1.2.3-70-g09d2 From fd23a0e909c8478f3d9103bce410548af2496f92 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Fri, 10 May 2019 21:56:16 -0500 Subject: RGB Matrix Effects: Cycle Out to In & Cycle Out to In Dual (#5812) --- docs/feature_rgb_matrix.md | 4 ++++ quantum/rgb_matrix_animations/cycle_out_in_anim.h | 23 ++++++++++++++++++++++ .../rgb_matrix_animations/cycle_out_in_dual_anim.h | 23 ++++++++++++++++++++++ .../rgb_matrix_animations/rgb_matrix_effects.inc | 2 ++ 4 files changed, 52 insertions(+) create mode 100644 quantum/rgb_matrix_animations/cycle_out_in_anim.h create mode 100644 quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index e29433a4b..8347660df 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -197,6 +197,8 @@ enum rgb_matrix_effects { RGB_MATRIX_CYCLE_ALL, // Full keyboard solid hue cycling through full gradient RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right RGB_MATRIX_CYCLE_UP_DOWN, // Full gradient scrolling top to bottom + RGB_MATRIX_CYCLE_OUT_IN, // Full gradient scrolling out to in + RGB_MATRIX_CYCLE_OUT_IN_DUAL, // Full dual gradients scrolling out to in RGB_MATRIX_RAINBOW_MOVING_CHEVRON, // Full gradent Chevron shapped scrolling left to right RGB_MATRIX_DUAL_BEACON, // Full gradient spinning around center of keyboard RGB_MATRIX_RAINBOW_BEACON, // Full tighter gradient spinning around center of keyboard @@ -236,6 +238,8 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | +|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN` |Disables `RGB_MATRIX_CYCLE_OUT_IN` | +|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL` |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL` | |`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON` |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON` | |`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | |`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` | diff --git a/quantum/rgb_matrix_animations/cycle_out_in_anim.h b/quantum/rgb_matrix_animations/cycle_out_in_anim.h new file mode 100644 index 000000000..dc9d09fd3 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_out_in_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_CYCLE_OUT_IN +RGB_MATRIX_EFFECT(CYCLE_OUT_IN) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool CYCLE_OUT_IN(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.h = 3 * dist / 2 + time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_CYCLE_OUT_IN diff --git a/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h b/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h new file mode 100644 index 000000000..941e6b9a8 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +RGB_MATRIX_EFFECT(CYCLE_OUT_IN_DUAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool CYCLE_OUT_IN_DUAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = 56 - abs8(g_led_config.point[i].x - 112); + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.h = 3 * dist + time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL diff --git a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc index 9bc645461..f05a415a5 100644 --- a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc +++ b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc @@ -7,6 +7,8 @@ #include "rgb_matrix_animations/cycle_left_right_anim.h" #include "rgb_matrix_animations/cycle_up_down_anim.h" #include "rgb_matrix_animations/rainbow_moving_chevron_anim.h" +#include "rgb_matrix_animations/cycle_out_in_anim.h" +#include "rgb_matrix_animations/cycle_out_in_dual_anim.h" #include "rgb_matrix_animations/dual_beacon_anim.h" #include "rgb_matrix_animations/rainbow_beacon_anim.h" #include "rgb_matrix_animations/rainbow_pinwheels_anim.h" -- cgit v1.2.3-70-g09d2 From 7871a465d36d11c4f9216a9e862104e0e770c6f4 Mon Sep 17 00:00:00 2001 From: ymzcdg <49898694+ymzcdg@users.noreply.github.com> Date: Sun, 12 May 2019 00:22:16 +0800 Subject: translate docs into Mandarin Chinese (#5807) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * translate newbs.md into Madarin Chinese translate newbs.md into Madarin Chinese * translate docs into Mandarin Chinese translate getting_started_github.md into Mandarin Chinese * translate getting_started_getting_help.md into Mandarin Chinese translate getting_started_getting_help.md into Mandarin Chinese * contributing.md to Chinese Personify QMK as a girl named Q酱 . It can make more developer read this document and contribute QMK. * getting_started_introduction.md to Chinese getting_started_introduction.md to Chinese * faq.md to Chinese faq.md to Chinese * crlf2lf getting_started_introduction.md ending line fix getting_started_introduction.md * crlf2lf contributing.md crlf2lf contributing.md --- docs/zh-cn/contributing.md | 205 +++++++++++++++++++++++++++++ docs/zh-cn/faq.md | 6 + docs/zh-cn/getting_started_getting_help.md | 15 +++ docs/zh-cn/getting_started_github.md | 59 +++++++++ docs/zh-cn/newbs.md | 23 ++++ 5 files changed, 308 insertions(+) create mode 100644 docs/zh-cn/contributing.md create mode 100644 docs/zh-cn/faq.md create mode 100644 docs/zh-cn/getting_started_getting_help.md create mode 100644 docs/zh-cn/getting_started_github.md create mode 100644 docs/zh-cn/newbs.md (limited to 'docs') diff --git a/docs/zh-cn/contributing.md b/docs/zh-cn/contributing.md new file mode 100644 index 000000000..62b956b61 --- /dev/null +++ b/docs/zh-cn/contributing.md @@ -0,0 +1,205 @@ +# 如何做贡献 + +👍🎉 首先感谢各位百忙之中抽空阅读本文档，并为我们无私奉献。给您点赞啦！ 🎉👍 + +第三方的帮助让Q酱成长了许多呢，Q酱也从你们那学到了不少新东西。Q酱希望每一个想帮助我的人都能很方便的做出有用的贡献。在这里我给摩拳擦掌的你们写了一点引导，让你们的代码在不对我做重大改动的情况下都能成功的被采纳哦。 + +* [项目概况](#项目概况) +* [代码规范](#代码规范) +* [一般教程](#一般教程) +* [行为守则对于我来说有何意义?](#行为守则对于我来说有何意义?) + +## 这文章巨长无比不想读啊! 我就想问个问题而已! + +您要是想问关于Q酱的问题的话可以在[OLKB Subreddit](https://reddit.com/r/olkb)或者是[Discord](https://discord.gg/Uq7gcHh)随意问。 + +请记住: + +* 维护Q酱的小可爱有的时候可能会有点忙，不能及时回答您的问题，耐心等等，他们都是很nice的人呀。 +* 维护Q酱的人都是很无私的善良的人。无论是贡献代码还是回答问题，都是义务的。有时见到他们努力回答各种问题，解决各种BUG，Q酱也是很心疼的。 +* 您可以看看下面的教程，可以让您的问题浅显易懂，更容易回答： + * https://opensource.com/life/16/10/how-ask-technical-questions + * http://www.catb.org/esr/faqs/smart-questions.html + +# 项目概况 + +Q酱很大一部分是用C语言组成的，不过有一小部分特性是C++的。怎么说呢，都是我的一部分，两个我都爱。Q酱一般是在键盘上的嵌入式处理器那里工作的，尤其与AVR([LUFA](http://www.fourwalledcubicle.com/LUFA.php))和ARM ([ChibiOS](http://www.chibios.com))两小哥哥搭配，干活不累，嘻嘻。如果您精通Arduino的话您会发现很多熟悉的概念，但也有点不爽，因为您以前的经验可能没法用来帮助Q酱。 + + + +# Q酱，我在哪能帮助你嘞? + +您要是有问题的话可以 [提出一个issue](https://github.com/qmk/qmk_firmware/issues) 或 [在Discord上交流一下](https://discord.gg/Uq7gcHh). + +# Q酱，我如何帮助你? + +您以前是否没为开源贡献过代码，而又想知道帮助Q酱是怎么一回事? 稍安勿躁，咱给您总结一下！ + +0. 先注册一个 [GitHub](https://github.com) 账户。 +1. 做好一个你要贡献的布局，那就要 [找一个你想解决的问题](https://github.com/qmk/qmk_firmware/issues)，或者 [找一个你想添加的特性](https://github.com/qmk/qmk_firmware/issues?q=is%3Aopen+is%3Aissue+label%3Afeature)。 +2. 把关联着问题的仓库分叉（fork）到你的仓库。这样你在`你的GitHub用户名/qmk_firmware`就有一个仓库备份啦。 +3. 使用 `git clone https://github.com/此处添GitHub用户名/此处添仓库名.git`这个命令把仓库同步到你的电脑中。 +4. 您要是想开发一个新特性的话可以先创建一个issue和Q酱的维护者讨论一下您要做什么。 +5. 使用`git checkout -b 此处写分支名字（别用汉字）`命令来创建一个分支（branch）用于开发。 +6. 对要解决的问题或要添加的特性进行适当的更改。 +7. 使用 `git add 把改变的文件的目录写这里` 可以添加改变的文件内容到git用于管理工程状态的索引（快照）里。 +8. 使用 `git commit -m "这里写修改的相关信息"` 来描述你做出了什么修改。 +9. 使用 `git push origin 此处写分支名字`来把你的更改同步到GitHub库里（反正不是打篮球那个库里）。 +10. 提交一个[QMK 固件的pull request](https://github.com/qmk/qmk_firmware/pull/new/master)。 +11. 给你的pull request拟一个标题，包括简短的描述和问题或错误代码。比如, 你可以起一个这样的"Added more log outputting to resolve #4352"（最好用英语，毕竟Q酱的中文也不是那么的溜，有可能会看不懂中文）。 +12. 在描述（description）里面写你做了哪些更改，你的代码里还存在什么问题, 或者你想问维护的小可爱们的问题。你的your pull request有点小问题无伤大雅(本来也没有完美的代码嘛), 维护的小可爱们会竭尽全力帮您改进的！ +13. 维护人员审查代码可能需要一些时间。 +14. 维护人员会通知您要更改什么地方，然后您就按照建议改一改。 +15. 预祝您合并成功！ + +# 代码规范 + +其实也没有什么特别严格的规范啦，但是俗话说的好：没有规矩，不成方圆。您可以看一下您的要改动的代码周围的画风，然后保持队形。如果你感觉周围都不知道是什么牛鬼蛇神的话就看看下面的建议： + +* 我们用肆(4)个空格来缩进(软件中也可以设置到Tab键) +* 我们使用改良的1TBS(允许单行样式) + * 左大括号: 在开放性语句块那行的末尾 + * 右大括号: 和开放性语句块第一个字母对齐 + * Else If: 将右大括号放在行的开头，下一个左大括号放在同一行的结尾 + * 可选大括号: 可选大括号是必选的 + * 应该这样: if (condition) { return false; } + * 不应该这样: if (condition) return false; +* 建议使用C语言风格的注释: `/* */` + * 把注释想象成一个描述特征的故事 + * 充分使用注释来描述你为何这样修改 + * 有些公认的东西就不要写到注释里面了 + * 如果你不知道注释是否多余,看下面 +* 一般不要主动换行，主动换行的话每行不要超过76列 +* 要把 `#pragma once` 放到头文件的开始哦，抛弃老土的(`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)吧 +* 下面两种预处理命令都可以用: `#ifdef DEFINED` 还有 `#if defined(DEFINED)` + * 以上那句对处女座不是很友好哈，处女座的朋友们就别纠结了，直接 `#if defined(DEFINED)` 。 + * 还有就是选好一种风格就一直用，一直用一直爽，不要朝三暮四, 除非你要变化到多重条件的 `#if`。 + * `#` 和 `if`要挨在一起哦，再让本空格在中间冒充电灯泡本空格会生气的。 + * 以下是缩进规则: + * 首先考虑可读性，强迫症的朋友们总想要保持代码的高一致性，这样可不好。 + * 保证文件已有风格不变。如果代码本来就是杂糅风格，那就见机行事，让你的修改更有意义些。 + * 其实你也可以在缩进的时候看看周围其他代码，然后范水模山，预处理命令可以有自己的缩进风格。 + +可以参照下面: + +```c +/* foo 的 Enums*/ +enum foo_state { + FOO_BAR, + FOO_BAZ, +}; + +/* 有返回值的情况 */ +int foo(void) { + if (some_condition) { + return FOO_BAR; + } else { + return -1; + } +} +``` + +# Clang-format的自动格式化 +[Clang-format](https://clang.llvm.org/docs/ClangFormat.html) 是LLVM的一部分，可以帮你自动格式化代码。我们给你准备好了一个适用于以上规范的配置文件，会帮你调整缩进和换行，你只需要写好括号就好。有了它，你再也不用担心调整代码格式太耗时，没有时间陪伴自己（虚构）的另一半了。 + +使用[LLVM 完整安装](http://llvm.org/builds/)可以在Windows上安装clang-format, Ubuntu用户要用`sudo apt install clang-format`。 + +命令行的朋友们, 加上 `-style=file`选项就会自动在QMK的根目录寻找.clang-format配置文件了。 + +VSCode用户, 标准的 C/C++ 插件就支持clang-format, 或者可以用[独立扩展](https://marketplace.visualstudio.com/items?itemName=LLVMExtensions.ClangFormat)也行。 + +有些东西(比如LAYOUT宏) 会被clang-format打乱，所以那些文件就别用clang-format了,这里就教您一个小窍门，在`// clang-format off` 和 `//clang-format on`之间装上会被搞乱的代码就好了。 + +# 一般教程 + +你可以给Q酱的不同部分添砖加瓦，但也要用不同的方法严谨检查。不论你修改哪里最好还是看看下边。 + +* 将PR（pull request）分成一个个的逻辑单元。 比如，不要一次将两个新特性PR出去。要添加的特性排好队，一个一个来。 +* 提交之前看一眼，`git diff --check`的空格一定要写对了 +* 确定你的代码能通过编译 + * 布局: 确定`make keyboard:your_new_keymap` 不返回错误 + * 键盘: 确定 `make keyboard:all` 不返回错误 + * 核心代码: 确定 `make all` 不返回错误 +* 提交的信息尽量明确。第一行写点简短介绍(每行不多于70个英文字母), 第二行空着,第三行和后面就要写些必要的细节了。最好用英文写，比如: + +``` +Adjust the fronzlebop for the kerpleplork + +The kerpleplork was intermittently failing with error code 23. The root cause was the fronzlebop setting, which causes the kerpleplork to activate every N iterations. + +Limited experimentation on the devices I have available shows that 7 is high enough to avoid confusing the kerpleplork, but I'd like to get some feedback from people with ARM devices to be sure. +``` + +## 文档 + +想帮助Q酱当然是先看文档最简单了。找到这个文档哪里错了然后改正它对于你来说超级简单! 我们也对有写文档能力的人求贤若渴，如果你是对的人[点这个](#Q酱，我在哪能帮助你嘞?)! + +文档呢，都静静的放在`qmk_firmware/docs` 目录里, 也或者您想为网页做贡献的话也是可以的哦。 + +在文档中附代码案例时, 先观察文档其他地方的命名规范。比如, 把enums的名字都改成像`my_layers`或者`my_keycodes`来防止名字不一致的enums被当作特务枪毙: + +```c +enum my_layers { + _FIRST_LAYER, + _SECOND_LAYER +}; + +enum my_keycodes { + FIRST_LAYER = SAFE_RANGE, + SECOND_LAYER +}; +``` + +## 布局 + +大多数QMK新手都从创建一个自己的布局开始。我们尽力保证布局规范宽松 (毕竟布局是个性的体现) 不过建议遵守以下准则，这样可以让别人更好理解你的代码 + +* 用 [模板](documentation_templates.md)写个`readme.md`。 +* 所有的布局PR都会被squash, 如果你想知道你的提交是怎么被squash的那你就自己来吧 +* 不要把新特性和布局一起PR。可以分别PR他们 +* 布局文件夹就不要放`Makefile`了，这个操作都过时啦 +* 更新文件头部的copyrights(看`%YOUR_NAME%`那) + +## 键盘 + +QMK的最终归宿是键盘。有些键盘是社区维护的，有一些是制作这些键盘的人维护的。`readme.md`会告诉你是谁维护了这个键盘，如果你对某个键盘有疑问，可以 [创建一个Issue](https://github.com/qmk/qmk_firmware/issues) 来问一问维护者。 + +我们建议你按下面的来操作: + +* 用[模板](documentation_templates.md)写`readme.md`。 +* 提交数量尽量合理，不然我们可就要把你的PR给squash了。 +* 不要把新特性和新键盘一起PR。可以分别PR他们 +* 用父文件夹的名字命名 `.c`/`.h`文件, 比如`/keyboards///.[ch]` +* 键盘文件夹就不要放`Makefile`了，这个操作都过时啦 +* 更新文件头部的copyrights(看`%YOUR_NAME%`那) + +## Quantum/TMK 核心 + +在您废寝忘食地开发Q酱新特性或者帮Q酱驱虫之前，一定要确保你的工作是有意义的。看看[了解QMK](understanding_qmk.md)你会对Q酱有更深的了解，这个文档将带你领略QMK的程序流程。现在你应该和维护团对谈谈来了解实现你想法的最佳方法了。一下渠道都可以： + +* [在Discord交流](https://discord.gg/Uq7gcHh) +* [建立一个Issue](https://github.com/qmk/qmk_firmware/issues/new) + +新特性和BUG的修复影响所有键盘。开发组也在翻修QMK。所以，在实施重大返修之前一定要讨论一下。如果你在没有事先与维护团队沟通的情况下提交了一个PR，而且你的选择与维护团队的计划方向不符，那你可能要面临大改了。 + +修复BUG或者开发新特性之前看看这个： + +* **默认不启用** - QMK运行的芯片多数内存有限，所以首要考虑的还应该是布局不要被破坏，于是特性默认是不启用的。你喜欢什么特性的话就打开它，如果你觉得有些特性应该默认开启或者你能帮助缩减代码，那就联系维护组吧。 +* **提交之前在本地编译** - 这个简直就是家喻户晓了，但是也确实需要编译啊！ 我们的Travis系统会发现一切问题，但是自己编译一下可要比在线等快多了。 +* **注意版本和芯片平台** - 有那么几个键盘有支持不同配置甚至是不同芯片的版本。试着写一个能AVR和ARM两个平台运行的特性，或者在不支持的平台自动禁用。 +* **解释你的新特性** - 在`docs/`写个文档, 你可以创建新文档或者写到现有文档中。如果你不把它记录下来，其他人就无法从你的努力中获益。 + +也可以看看以下建议： + +* 提交数量尽量合理，不然我们可就要把你的PR给squash了。 +* 不要把新特性、布局和键盘一起PR。可以分别PR他们。 +* 给你的特性写[单元测试](unit_testing.md)。 +* 你编辑的文件风格要一致，如果风格不明确或者是混搭风的，你就要先看看[代码规范](#代码规范)确认情况。 + +## 重构 + +为了保持QMK脉络清晰，Q酱打算深入规划重构一下自己，然后让合作者进行修改。如果你有重构的思路或建议[创建一个issue](https://github.com/qmk/qmk_firmware/issues), Q酱很乐意讨论一下怎么改进一下。 + +# 行为守则对于我来说有何意义? + +我们的[行为守则](https://github.com/qmk/qmk_firmware/blob/master/CODE_OF_CONDUCT.md) 是说明您有责任尊重和礼貌地对待项目中的每个人，无论他们的身份如何。 如果你是我们行为准则所描述的不当行为的受害者，我们将站在你这边，并按照行为准则对施暴者进行适当谴责。 diff --git a/docs/zh-cn/faq.md b/docs/zh-cn/faq.md new file mode 100644 index 000000000..3d0b65c6f --- /dev/null +++ b/docs/zh-cn/faq.md @@ -0,0 +1,6 @@ +# 常见问题 + +* [一般问题](faq_general.md) +* [构建和编译QMK](faq_build.md) +* [QMK调试和故障排除](faq_debug.md) +* [布局问题](faq_keymap.md) diff --git a/docs/zh-cn/getting_started_getting_help.md b/docs/zh-cn/getting_started_getting_help.md new file mode 100644 index 000000000..cf770a770 --- /dev/null +++ b/docs/zh-cn/getting_started_getting_help.md @@ -0,0 +1,15 @@ +# 获得帮助 + +有很多方法来获得关于QMK的帮助. + +## 实时聊天 + +你可以在我们的主要[Discord服务器](https://discord.gg/Uq7gcHh)找到QMK的开发者和用户。有很多讨论固件的不同频道, 工具箱(Toolbox), 硬件,配置工具(configurator). + +## OLKB Subreddit + +QMK的官方论坛是[/r/olkb](https://reddit.com/r/olkb) 在[reddit.com](https://reddit.com)上. + +## Github的Issue + +你可以在GitHub上 [提出issue](https://github.com/qmk/qmk_firmware/issues).当您的问题需要长期讨论或调试时，这尤其方便。 diff --git a/docs/zh-cn/getting_started_github.md b/docs/zh-cn/getting_started_github.md new file mode 100644 index 000000000..0400eea64 --- /dev/null +++ b/docs/zh-cn/getting_started_github.md @@ -0,0 +1,59 @@ +# 如何在QMK中使用Github + +Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK. + +?> 本教程假设您已安装GitHub，并且您喜欢使用命令行工作。 + +首先 [Github上的QMK页面](https://github.com/qmk/qmk_firmware), 您能看到右上方有个按钮写着"Fork": + +![从Github上分叉](http://i.imgur.com/8Toomz4.jpg) + +如果你是某组织成员，你将需要选择分叉到哪个账户。一般情况下, 你是想要分叉到你的私人账户下。当你完成分叉 (有时需要等一会), 点击"Clone or Download" 按钮: + +!从Github下载](http://i.imgur.com/N1NYcSz.jpg) + +你要选择 "HTTPS", 然后选择链接复制: + +![HTTPS链接](http://i.imgur.com/eGO0ohO.jpg) + +然后，在命令行输入`git clone `，然后粘贴你的链接: + +``` +user@computer:~$ git clone https://github.com/whoeveryouare/qmk_firmware.git +Cloning into 'qmk_firmware'... +remote: Counting objects: 46625, done. +remote: Compressing objects: 100% (2/2), done. +remote: Total 46625 (delta 0), reused 0 (delta 0), pack-reused 46623 +Receiving objects: 100% (46625/46625), 84.47 MiB | 3.14 MiB/s, done. +Resolving deltas: 100% (29362/29362), done. +Checking out files: 100% (2799/2799), done. +``` + +现在你本地计算机有QMK的分叉了,你可以添加你的布局了, 为你的键盘编译并刷新固件吧。如果你觉得你的修改很不错, 你可以添加,提交,然后想你的分叉推出（pull）你的改变，像这样: + +``` +user@computer:~$ git add . +user@computer:~$ git commit -m "adding my keymap" +[master cccb1608] adding my keymap + 1 file changed, 1 insertion(+) + create mode 100644 keyboards/planck/keymaps/mine/keymap.c +user@computer:~$ git push +Counting objects: 1, done. +Delta compression using up to 4 threads. +Compressing objects: 100% (1/1), done. +Writing objects: 100% (1/1), 1.64 KiB | 0 bytes/s, done. +Total 1 (delta 1), reused 0 (delta 0) +remote: Resolving deltas: 100% (1/1), completed with 1 local objects. +To https://github.com/whoeveryouare/qmk_firmware.git + + 20043e64...7da94ac5 master -> master +``` + +现在你的改动已经在你Github上的分支中了 - 如果你回到这 (`https://github.com/你的GitHub账户名/qmk_firmware`) ,你可以点击下方所示按钮创建 "New Pull Request": + +![新的 Pull Request](http://i.imgur.com/DxMHpJ8.jpg) + +现在你可以看到你所做的一切 - 如果看起来不错, 就可以点击 "Create Pull Request"定稿了: + +![创建Pull Request](http://i.imgur.com/Ojydlaj.jpg) + +提交后,我们会开跟你说你的改动,要求您进行更改, 并最终接受您的更改!感谢您为QMK做的贡献 :) diff --git a/docs/zh-cn/newbs.md b/docs/zh-cn/newbs.md new file mode 100644 index 000000000..8c36b0d24 --- /dev/null +++ b/docs/zh-cn/newbs.md @@ -0,0 +1,23 @@ +# QMK菜鸟教程 + +QMK是为你机械硬盘设计的的一个强大的开源固件。使用QMK可以很简单的让你的定制键盘变得强大。看完这篇文章，无论你是菜鸟还是大佬，都可以顺利的使用QMK来定制键盘。 + +你是否为不知道你的键盘能不能运行QMK而苦恼? 如果你的机械键盘是你自己做的，那么这把键盘一般可以运行QMK。我们提供了[一大堆自制键盘](http://qmk.fm/keyboards/), 所以即便你的键盘不能运行QMK你也很容易能找到满足你需求的键盘。 + +## 概览 + +这个教程有7个主要部分： + +* [新手上路](newbs_getting_started.md) +* [用命令行构建你的第一个固件](newbs_building_firmware.md) +* [用在线界面构建你的第一个固件](newbs_building_firmware_configurator.md) +* [刷新固件](newbs_flashing.md) +* [测试和调试](newbs_testing_debugging.md) +* [Git最佳实践](newbs_best_practices.md) +* [其他学习资源](newbs_learn_more_resources.md) + +这份教程旨在帮助没有固件构建经验的人，也是根据该目的做出选择和建议。这些程序有很多替代方法，大部分替代我们都支持。如果你对完成一个任务有疑问，可以[向我们寻求帮助](getting_started_getting_help.md). + +## 其他资源 + +* [Thomas Baart的 QMK基础博客](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – 这是一个用户创建的博客，涵盖了为新手准备的使用QMK的基础知识。 -- cgit v1.2.3-70-g09d2 From c6184d2e7ed9695c22635431394e501b1d5e6271 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 12 May 2019 00:20:14 -0500 Subject: Added check for event pressed to clear space cadet (#5839) * Added check for pressed to clear space cadet * Found some docs to update * Update docs/quantum_keycodes.md Co-Authored-By: fauxpark * Changes from PR --- docs/feature_space_cadet.md | 10 +++++----- docs/keycodes.md | 5 +++++ docs/quantum_keycodes.md | 7 ++++++- quantum/process_keycode/process_space_cadet.c | 12 +++++++----- 4 files changed, 23 insertions(+), 11 deletions(-) (limited to 'docs') diff --git a/docs/feature_space_cadet.md b/docs/feature_space_cadet.md index 5c375c518..075578522 100644 --- a/docs/feature_space_cadet.md +++ b/docs/feature_space_cadet.md @@ -20,7 +20,7 @@ Firstly, in your keymap, do one of the following: |`KC_RCPC` |Right Control when held, `)` when tapped | |`KC_LAPO` |Left Alt when held, `(` when tapped | |`KC_RAPC` |Right Alt when held, `)` when tapped | -|`KC_SFTENT`|Right Shift when held, `Enter` when tapped | +|`KC_SFTENT`|Right Shift when held, Enter when tapped | ## Caveats @@ -38,10 +38,10 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe |----------------|-------------------------------|---------------------------------------------------------------------------------| |`LSPO_KEYS` |`KC_LSFT, LSPO_MOD, LSPO_KEY` |Send `KC_LSFT` when held, the mod and key defined by `LSPO_MOD` and `LSPO_KEY`. | |`RSPC_KEYS` |`KC_RSFT, RSPC_MOD, RSPC_KEY` |Send `KC_RSFT` when held, the mod and key defined by `RSPC_MOD` and `RSPC_KEY`. | -|`LCPO_KEYS` |`KC_LCTL, KC_LCTL, KC_9` |Send `KC_LCTL` when held, the mod `KC_LCTL` with the key `KC_9` when tapped. | -|`RCPC_KEYS` |`KC_RCTL, KC_RCTL, KC_0` |Send `KC_RCTL` when held, the mod `KC_RCTL` with the key `KC_0` when tapped. | -|`LAPO_KEYS` |`KC_LALT, KC_LALT, KC_9` |Send `KC_LALT` when held, the mod `KC_LALT` with the key `KC_9` when tapped. | -|`RAPC_KEYS` |`KC_RALT, KC_RALT, KC_0` |Send `KC_RALT` when held, the mod `KC_RALT` with the key `KC_0` when tapped. | +|`LCPO_KEYS` |`KC_LCTL, KC_LSFT, KC_9` |Send `KC_LCTL` when held, the mod `KC_LSFT` with the key `KC_9` when tapped. | +|`RCPC_KEYS` |`KC_RCTL, KC_RSFT, KC_0` |Send `KC_RCTL` when held, the mod `KC_RSFT` with the key `KC_0` when tapped. | +|`LAPO_KEYS` |`KC_LALT, KC_LSFT, KC_9` |Send `KC_LALT` when held, the mod `KC_LSFT` with the key `KC_9` when tapped. | +|`RAPC_KEYS` |`KC_RALT, KC_RSFT, KC_0` |Send `KC_RALT` when held, the mod `KC_RSFT` with the key `KC_0` when tapped. | |`SFTENT_KEYS` |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped. | diff --git a/docs/keycodes.md b/docs/keycodes.md index c0e6aa5c6..e9cfd3425 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -216,6 +216,11 @@ This is a reference only. Each group of keys links to the page documenting their |`KC_GESC` |`GRAVE_ESC`|Escape when tapped, ` when pressed with Shift or GUI| |`KC_LSPO` | |Left Shift when held, `(` when tapped | |`KC_RSPC` | |Right Shift when held, `)` when tapped | +|`KC_LCPO` | |Left Control when held, `(` when tapped | +|`KC_RCPC` | |Right Control when held, `)` when tapped | +|`KC_LAPO` | |Left Alt when held, `(` when tapped | +|`KC_RAPC` | |Right Alt when held, `)` when tapped | +|`KC_SFTENT` | |Right Shift when held, Enter when tapped | |`KC_LEAD` | |The [Leader key](feature_leader_key.md) | |`KC_LOCK` | |The [Lock key](feature_key_lock.md) | |`FUNC(n)` |`F(n)` |Call `fn_action(n)` (deprecated) | diff --git a/docs/quantum_keycodes.md b/docs/quantum_keycodes.md index 90192e632..a2ba34c32 100644 --- a/docs/quantum_keycodes.md +++ b/docs/quantum_keycodes.md @@ -1,6 +1,6 @@ # Quantum Keycodes -Quantum keycodes allow for easier customisation of your keymap than the basic ones provide, without having to define custom actions. +Quantum keycodes allow for easier customization of your keymap than the basic ones provide, without having to define custom actions. All keycodes within quantum are numbers between `0x0000` and `0xFFFF`. Within your `keymap.c` it may look like you have functions and other special cases, but ultimately the C preprocessor will translate those into a single 4 byte integer. QMK has reserved `0x0000` through `0x00FF` for standard keycodes. These are keycodes such as `KC_A`, `KC_1`, and `KC_LCTL`, which are basic keys defined in the USB HID specification. @@ -16,6 +16,11 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are |`KC_GESC` |`GRAVE_ESC`|Escape when tapped, ` when pressed with Shift or GUI| |`KC_LSPO` | |Left Shift when held, `(` when tapped | |`KC_RSPC` | |Right Shift when held, `)` when tapped | +|`KC_LCPO` | |Left Control when held, `(` when tapped | +|`KC_RCPC` | |Right Control when held, `)` when tapped | +|`KC_LAPO` | |Left Alt when held, `(` when tapped | +|`KC_RAPC` | |Right Alt when held, `)` when tapped | +|`KC_SFTENT` | |Right Shift when held, Enter when tapped | |`KC_LEAD` | |The [Leader key](feature_leader_key.md) | |`KC_LOCK` | |The [Lock key](feature_key_lock.md) | |`FUNC(n)` |`F(n)` |Call `fn_action(n)` (deprecated) | diff --git a/quantum/process_keycode/process_space_cadet.c b/quantum/process_keycode/process_space_cadet.c index ac39df808..089199eee 100644 --- a/quantum/process_keycode/process_space_cadet.c +++ b/quantum/process_keycode/process_space_cadet.c @@ -60,18 +60,18 @@ // Control / paren setup #ifndef LCPO_KEYS - #define LCPO_KEYS KC_LCTL, KC_LCTL, KC_9 + #define LCPO_KEYS KC_LCTL, KC_LSFT, KC_9 #endif #ifndef RCPC_KEYS - #define RCPC_KEYS KC_RCTL, KC_RCTL, KC_0 + #define RCPC_KEYS KC_RCTL, KC_RSFT, KC_0 #endif // Alt / paren setup #ifndef LAPO_KEYS - #define LAPO_KEYS KC_LALT, KC_LALT, KC_9 + #define LAPO_KEYS KC_LALT, KC_LSFT, KC_9 #endif #ifndef RAPC_KEYS - #define RAPC_KEYS KC_RALT, KC_RALT, KC_0 + #define RAPC_KEYS KC_RALT, KC_RSFT, KC_0 #endif // Shift / Enter setup @@ -143,7 +143,9 @@ bool process_space_cadet(uint16_t keycode, keyrecord_t *record) { return false; } default: { - sc_last = 0; + if (record->event.pressed) { + sc_last = 0; + } break; } } -- cgit v1.2.3-70-g09d2 From 670a9b7f83dacf2b0e9fb42756935a77598c6677 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Thu, 16 May 2019 13:11:28 +0900 Subject: Add effect range to rgblight.c (#5856) * add rgblight_set_effect_range() * implement effect range * Arrange the order of function list in rgblight.h . * update docs/feature_rgblight.md * fix RGBLIGHT_RAINBOW_SWIRL_RANGE default value * add example code about Utility Functions * add example code about direct operation functions * When RGBLIGHT_SPLIT is defined, the following function has no meaning and is invalidated. * rgblight_setrgb_master(r, g, b) * rgblight_setrgb_slave(r, g, b) * rgblight_sethsv_master(h, s, v) * rgblight_sethsv_slave(h, s, v) * add temporary test code for rgblight_set_effect_range * fix rgblight_effect_knight() bug * Test End. Revert "add temporary test code for rgblight_set_effect_range" This reverts commit 5680cddd012d68b2db75a532862a7fef250f8973. --- docs/feature_rgblight.md | 134 +++++++++++++++++++++++++++++++++-------------- quantum/rgblight.c | 117 +++++++++++++++++++++++------------------ quantum/rgblight.h | 123 +++++++++++++++++++++++++------------------ 3 files changed, 234 insertions(+), 140 deletions(-) (limited to 'docs') diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 1e0ce9147..be4ddfa72 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -129,7 +129,7 @@ The following options are used to tweak the various animations: |`RGBLIGHT_EFFECT_KNIGHT_LED_NUM` |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel | |`RGBLIGHT_EFFECT_KNIGHT_LENGTH` |`3` |The number of LEDs to light up for the "Knight" animation | |`RGBLIGHT_EFFECT_KNIGHT_OFFSET` |`0` |The number of LEDs to start the "Knight" animation from the start of the strip by | -|`RGBLIGHT_RAINBOW_SWIRL_RANGE` |`360` |Range adjustment for the rainbow swirl effect to get different swirls | +|`RGBLIGHT_RAINBOW_SWIRL_RANGE` |`255` |Range adjustment for the rainbow swirl effect to get different swirls | |`RGBLIGHT_EFFECT_SNAKE_LENGTH` |`4` |The number of LEDs to light up for the "Snake" animation | ### Example Usage to Reduce Memory Footprint @@ -176,44 +176,100 @@ const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64}; If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include: -|Function |Description | -|--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------| -|`rgblight_enable()` |Turn LEDs on, based on their previous state | -|`rgblight_enable_noeeprom()` |Turn LEDs on, based on their previous state (not written to EEPROM) | -|`rgblight_disable()` |Turn LEDs off | -|`rgblight_disable_noeeprom()` |Turn LEDs off (not written to EEPROM) | -|`rgblight_mode(x)` |Set the mode, if RGB animations are enabled | -|`rgblight_mode_noeeprom(x)` |Set the mode, if RGB animations are enabled (not written to EEPROM) | -|`rgblight_setrgb(r, g, b)` |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | -|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM) | +### Utility Functions +|Function |Description | +|--------------------------------------------|-------------------------------------------------------------------| +|`sethsv(hue, sat, val, ledbuf)` |Set ledbuf to the given HSV value | +|`sethsv_raw(hue, sat, val, ledbuf)` |Set ledbuf to the given HSV value without RGBLIGHT_LIMIT_VAL check | +|`setrgb(r, g, b, ledbuf)` |Set ledbuf to the given RGB value where `r`/`g`/`b` | + +### Low level Functions +|Function |Description | +|--------------------------------------------|-------------------------------------------| +|`rgblight_set()` |Flash out led buffers to LEDs | +|`rgblight_set_clipping_range(pos, num)` |Set clipping Range. see [Clipping Range](#clipping-range) | + +Example: +```c +sethsv(HSV_WHITE, (LED_TYPE *)&led[0]); // led 0 +sethsv(HSV_RED, (LED_TYPE *)&led[1]); // led 1 +sethsv(HSV_GREEN, (LED_TYPE *)&led[2]); // led 2 +rgblight_set(); // Utility functions do not call rgblight_set() automatically, so they need to be called explicitly. +``` + +### Effects and Animations Functions +#### effect range setting +|Function |Description | +|--------------------------------------------|------------------| +|`rgblight_set_effect_range(pos, num)` |Set Effects Range | + +#### direct operation +|Function |Description | +|--------------------------------------------|-------------| +|`rgblight_setrgb_at(r, g, b, index)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `index` is between 0 and `RGBLED_NUM` (not written to EEPROM) | +|`rgblight_sethsv_at(h, s, v, index)` |Set a single LED to the given HSV value, where `h`/`s`/`v` are between 0 and 255, and `index` is between 0 and `RGBLED_NUM` (not written to EEPROM) | |`rgblight_setrgb_range(r, g, b, start, end)`|Set a continuous range of LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)| -|`rgblight_setrgb_master(r, g, b)` |Set the LEDs on the master side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | -|`rgblight_setrgb_slave(r, g, b)` |Set the LEDs on the slave side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | -|`rgblight_sethsv(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 | -|`rgblight_sethsv_noeeprom(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM) | -|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)| -|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)| -|`rgblight_sethsv_master(h, s, v)` |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) | -|`rgblight_sethsv_slave(h, s, v)` |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) | -|`rgblight_toggle()` |Toggle all LEDs between on and off | -|`rgblight_toggle_noeeprom()` |Toggle all LEDs between on and off (not written to EEPROM) | -|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations | -|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) | -|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations | -|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) | -|`rgblight_increase_hue()` |Increase the hue for all LEDs. This wraps around at maximum hue | -|`rgblight_increase_hue_noeeprom()` |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM) | -|`rgblight_decrease_hue()` |Decrease the hue for all LEDs. This wraps around at minimum hue | -|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM) | -|`rgblight_increase_sat()` |Increase the saturation for all LEDs. This wraps around at maximum saturation | -|`rgblight_increase_sat_noeeprom()` |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM) | -|`rgblight_decrease_sat()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation | -|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM) | -|`rgblight_increase_val()` |Increase the value for all LEDs. This wraps around at maximum value | -|`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM) | -|`rgblight_decrease_val()` |Decrease the value for all LEDs. This wraps around at minimum value | -|`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) | -|`rgblight_set_clipping_range(pos, num)` |Set clipping Range | +|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h`/`s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)| +|`rgblight_setrgb(r, g, b)` |Set effect range LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | +|`rgblight_setrgb_master(r, g, b)` |Set the LEDs on the master side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | +|`rgblight_setrgb_slave(r, g, b)` |Set the LEDs on the slave side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | +|`rgblight_sethsv_master(h, s, v)` |Set the LEDs on the master side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) | +|`rgblight_sethsv_slave(h, s, v)` |Set the LEDs on the slave side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) | + +Example: +```c +rgblight_sethsv(HSV_WHITE, 0); // led 0 +rgblight_sethsv(HSV_RED, 1); // led 1 +rgblight_sethsv(HSV_GREEN, 2); // led 2 +// The above functions automatically calls rgblight_set(), so there is no need to call it explicitly. +// Note that it is inefficient to call repeatedly. +``` + +#### effect mode change +|Function |Description | +|--------------------------------------------|-------------| +|`rgblight_mode(x)` |Set the mode, if RGB animations are enabled | +|`rgblight_mode_noeeprom(x)` |Set the mode, if RGB animations are enabled (not written to EEPROM) | +|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations | +|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) | +|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations | +|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) | + +#### effects mode disable/enable +|Function |Description | +|--------------------------------------------|-------------| +|`rgblight_toggle()` |Toggle effect range LEDs between on and off | +|`rgblight_toggle_noeeprom()` |Toggle effect range LEDs between on and off (not written to EEPROM) | +|`rgblight_enable()` |Turn effect range LEDs on, based on their previous state | +|`rgblight_enable_noeeprom()` |Turn effect range LEDs on, based on their previous state (not written to EEPROM) | +|`rgblight_disable()` |Turn effect range LEDs off | +|`rgblight_disable_noeeprom()` |Turn effect range LEDs off (not written to EEPROM) | + +#### hue, sat, val change +|Function |Description | +|--------------------------------------------|-------------| +|`rgblight_increase_hue()` |Increase the hue for effect range LEDs. This wraps around at maximum hue | +|`rgblight_increase_hue_noeeprom()` |Increase the hue for effect range LEDs. This wraps around at maximum hue (not written to EEPROM) | +|`rgblight_decrease_hue()` |Decrease the hue for effect range LEDs. This wraps around at minimum hue | +|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for effect range LEDs. This wraps around at minimum hue (not written to EEPROM) | +|`rgblight_increase_sat()` |Increase the saturation for effect range LEDs. This wraps around at maximum saturation | +|`rgblight_increase_sat_noeeprom()` |Increase the saturation for effect range LEDs. This wraps around at maximum saturation (not written to EEPROM) | +|`rgblight_decrease_sat()` |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation | +|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation (not written to EEPROM) | +|`rgblight_increase_val()` |Increase the value for effect range LEDs. This wraps around at maximum value | +|`rgblight_increase_val_noeeprom()` |Increase the value for effect range LEDs. This wraps around at maximum value (not written to EEPROM) | +|`rgblight_decrease_val()` |Decrease the value for effect range LEDs. This wraps around at minimum value | +|`rgblight_decrease_val_noeeprom()` |Decrease the value for effect range LEDs. This wraps around at minimum value (not written to EEPROM) | +|`rgblight_sethsv(h, s, v)` |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 | +|`rgblight_sethsv_noeeprom(h, s, v)` |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) | + +#### query +|Function |Description | +|-----------------------|-----------------| +|`rgblight_get_mode()` |Get current mode | +|`rgblight_get_hue()` |Get current hue | +|`rgblight_get_sat()` |Get current sat | +|`rgblight_get_val()` |Get current val | ## Colors @@ -324,4 +380,6 @@ In addition to setting the Clipping Range, you can use `RGBLIGHT_LED_MAP` togeth ``` clip mapped +## Hardware Modification + If your keyboard lacks onboard underglow LEDs, you may often be able to solder on an RGB LED strip yourself. You will need to find an unused pin to wire to the data pin of your LED strip. Some keyboards may break out unused pins from the MCU to make soldering easier. The other two pins, VCC and GND, must also be connected to the appropriate power pins. diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 77772e292..75e4ef0d8 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -101,19 +101,35 @@ LED_TYPE led[RGBLED_NUM]; static uint8_t clipping_start_pos = 0; static uint8_t clipping_num_leds = RGBLED_NUM; +static uint8_t effect_start_pos = 0; +static uint8_t effect_end_pos = RGBLED_NUM; +static uint8_t effect_num_leds = RGBLED_NUM; void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds) { clipping_start_pos = start_pos; clipping_num_leds = num_leds; } +void rgblight_set_effect_range(uint8_t start_pos, uint8_t num_leds) { + if (start_pos >= RGBLED_NUM) return; + if (start_pos + num_leds > RGBLED_NUM) return; + effect_start_pos = start_pos; + effect_end_pos = start_pos + num_leds; + effect_num_leds = num_leds; +} -void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { - HSV hsv = { hue, sat, val > RGBLIGHT_LIMIT_VAL ? RGBLIGHT_LIMIT_VAL : val }; +void sethsv_raw(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { + HSV hsv = { hue, sat, val }; RGB rgb = hsv_to_rgb(hsv); setrgb(rgb.r, rgb.g, rgb.b, led1); } +void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { + sethsv_raw( hue, sat, + val > RGBLIGHT_LIMIT_VAL ? RGBLIGHT_LIMIT_VAL : val, + led1); +} + void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) { (*led1).r = r; (*led1).g = g; @@ -501,15 +517,15 @@ void rgblight_sethsv_eeprom_helper(uint8_t hue, uint8_t sat, uint8_t val, bool w #else uint8_t range = RGBLED_GRADIENT_RANGES[delta / 2]; #endif - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - uint8_t _hue = ((uint16_t)i * (uint16_t)range) / RGBLED_NUM; + for (uint8_t i = 0; i < effect_num_leds; i++) { + uint8_t _hue = ((uint16_t)i * (uint16_t)range) / effect_num_leds; if (direction) { _hue = hue + _hue; } else { _hue = hue - _hue; } dprintf("rgblight rainbow set hsv: %d,%d,%d,%u\n", i, _hue, direction, range); - sethsv(_hue, sat, val, (LED_TYPE *)&led[i]); + sethsv(_hue, sat, val, (LED_TYPE *)&led[i + effect_start_pos]); } rgblight_set(); } @@ -557,7 +573,7 @@ uint8_t rgblight_get_val(void) { void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) { if (!rgblight_config.enable) { return; } - for (uint8_t i = 0; i < RGBLED_NUM; i++) { + for (uint8_t i = effect_start_pos; i < effect_end_pos; i++) { led[i].r = r; led[i].g = g; led[i].b = b; @@ -615,6 +631,7 @@ void rgblight_sethsv_range(uint8_t hue, uint8_t sat, uint8_t val, uint8_t start, rgblight_setrgb_range(tmp_led.r, tmp_led.g, tmp_led.b, start, end); } +#ifndef RGBLIGHT_SPLIT void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b) { rgblight_setrgb_range(r, g, b, 0 , (uint8_t) RGBLED_NUM/2); } @@ -630,36 +647,34 @@ void rgblight_sethsv_master(uint8_t hue, uint8_t sat, uint8_t val) { void rgblight_sethsv_slave(uint8_t hue, uint8_t sat, uint8_t val) { rgblight_sethsv_range(hue, sat, val, (uint8_t) RGBLED_NUM/2, (uint8_t) RGBLED_NUM); } +#endif // ifndef RGBLIGHT_SPLIT #ifndef RGBLIGHT_CUSTOM_DRIVER void rgblight_set(void) { - LED_TYPE *start_led = led + clipping_start_pos; + LED_TYPE *start_led; uint16_t num_leds = clipping_num_leds; - if (rgblight_config.enable) { - #ifdef RGBLIGHT_LED_MAP - LED_TYPE led0[RGBLED_NUM]; - for(uint8_t i = 0; i < RGBLED_NUM; i++) { - led0[i] = led[pgm_read_byte(&led_map[i])]; - } - start_led = led0 + clipping_start_pos; - #endif - #ifdef RGBW - ws2812_setleds_rgbw(start_led, num_leds); - #else - ws2812_setleds(start_led, num_leds); - #endif - } else { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { + + if (!rgblight_config.enable) { + for (uint8_t i = effect_start_pos; i < effect_end_pos; i++) { led[i].r = 0; led[i].g = 0; led[i].b = 0; } - #ifdef RGBW - ws2812_setleds_rgbw(start_led, num_leds); - #else - ws2812_setleds(start_led, num_leds); - #endif } +#ifdef RGBLIGHT_LED_MAP + LED_TYPE led0[RGBLED_NUM]; + for(uint8_t i = 0; i < RGBLED_NUM; i++) { + led0[i] = led[pgm_read_byte(&led_map[i])]; + } + start_led = led0 + clipping_start_pos; +#else + start_led = led + clipping_start_pos; +#endif +#ifdef RGBW + ws2812_setleds_rgbw(start_led, num_leds); +#else + ws2812_setleds(start_led, num_leds); +#endif } #endif @@ -926,9 +941,9 @@ void rgblight_effect_rainbow_swirl(animation_status_t *anim) { uint8_t hue; uint8_t i; - for (i = 0; i < RGBLED_NUM; i++) { - hue = (RGBLIGHT_RAINBOW_SWIRL_RANGE / RGBLED_NUM * i + anim->current_hue); - sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); + for (i = 0; i < effect_num_leds; i++) { + hue = (RGBLIGHT_RAINBOW_SWIRL_RANGE / effect_num_leds * i + anim->current_hue); + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i + effect_start_pos]); } rgblight_set(); @@ -957,7 +972,7 @@ void rgblight_effect_snake(animation_status_t *anim) { #if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) if (anim->pos == 0) { // restart signal if (increment == 1) { - pos = RGBLED_NUM - 1; + pos = effect_num_leds - 1; } else { pos = 0; } @@ -965,26 +980,27 @@ void rgblight_effect_snake(animation_status_t *anim) { } #endif - for (i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; + for (i = 0; i < effect_num_leds; i++) { + LED_TYPE *ledp = led + i + effect_start_pos; + ledp->r = 0; + ledp->g = 0; + ledp->b = 0; for (j = 0; j < RGBLIGHT_EFFECT_SNAKE_LENGTH; j++) { k = pos + j * increment; if (k < 0) { - k = k + RGBLED_NUM; + k = k + effect_num_leds; } if (i == k) { sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), - (LED_TYPE *)&led[i]); + ledp); } } } rgblight_set(); if (increment == 1) { if (pos - 1 < 0) { - pos = RGBLED_NUM - 1; + pos = effect_num_leds - 1; #if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) anim->pos = 0; #endif @@ -995,7 +1011,7 @@ void rgblight_effect_snake(animation_status_t *anim) { #endif } } else { - pos = (pos + 1) % RGBLED_NUM; + pos = (pos + 1) % effect_num_leds; #if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) anim->pos = pos; #endif @@ -1023,14 +1039,14 @@ void rgblight_effect_knight(animation_status_t *anim) { } #endif // Set all the LEDs to 0 - for (i = 0; i < RGBLED_NUM; i++) { + for (i = effect_start_pos; i < effect_end_pos; i++) { led[i].r = 0; led[i].g = 0; led[i].b = 0; } // Determine which LEDs should be lit up for (i = 0; i < RGBLIGHT_EFFECT_KNIGHT_LED_NUM; i++) { - cur = (i + RGBLIGHT_EFFECT_KNIGHT_OFFSET) % RGBLED_NUM; + cur = (i + RGBLIGHT_EFFECT_KNIGHT_OFFSET) % effect_num_leds + effect_start_pos; if (i >= low_bound && i <= high_bound) { sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[cur]); @@ -1064,9 +1080,9 @@ void rgblight_effect_christmas(animation_status_t *anim) { uint8_t i; anim->current_offset = (anim->current_offset + 1) % 2; - for (i = 0; i < RGBLED_NUM; i++) { + for (i = 0; i < effect_num_leds; i++) { hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + anim->current_offset) % 2) * 85; - sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i + effect_start_pos]); } rgblight_set(); } @@ -1099,13 +1115,14 @@ void rgblight_effect_rgbtest(animation_status_t *anim) { #ifdef RGBLIGHT_EFFECT_ALTERNATING void rgblight_effect_alternating(animation_status_t *anim) { - for(int i = 0; ipos){ - sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); - }else if (i>=RGBLED_NUM/2 && !anim->pos){ - sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); - }else{ - sethsv(rgblight_config.hue, rgblight_config.sat, 0, (LED_TYPE *)&led[i]); + for (int i = 0; i < effect_num_leds; i++) { + LED_TYPE *ledp = led + i + effect_start_pos; + if (ipos) { + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, ledp); + } else if (i>=effect_num_leds/2 && !anim->pos) { + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, ledp); + } else { + sethsv(rgblight_config.hue, rgblight_config.sat, 0, ledp); } } rgblight_set(); diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 35d7942ca..064522a2b 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -99,7 +99,7 @@ enum RGBLIGHT_EFFECT_MODE { #endif #ifndef RGBLIGHT_EFFECT_KNIGHT_LED_NUM -#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM RGBLED_NUM +#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM (effect_num_leds) #endif #ifndef RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL @@ -170,61 +170,79 @@ typedef struct _rgblight_status_t { #endif } rgblight_status_t; -#ifdef RGBLIGHT_SPLIT - #define RGBLIGHT_STATUS_CHANGE_MODE (1<<0) - #define RGBLIGHT_STATUS_CHANGE_HSVS (1<<1) - #define RGBLIGHT_STATUS_CHANGE_TIMER (1<<2) - #define RGBLIGHT_STATUS_ANIMATION_TICK (1<<3) +/* === Utility Functions ===*/ +void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); +void sethsv_raw(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); // without RGBLIGHT_LIMIT_VAL check +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1); - typedef struct _rgblight_syncinfo_t { - rgblight_config_t config; - rgblight_status_t status; - } rgblight_syncinfo_t; +/* === Low level Functions === */ +void rgblight_set(void); +void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds); - /* for split keyboard master side */ - uint8_t rgblight_get_change_flags(void); - void rgblight_clear_change_flags(void); - void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo); - /* for split keyboard slave side */ - void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom); +/* === Effects and Animations Functions === */ +/* effect range setting */ +void rgblight_set_effect_range(uint8_t start_pos, uint8_t num_leds); + +/* direct operation */ +void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index); +void rgblight_sethsv_at(uint8_t hue, uint8_t sat, uint8_t val, uint8_t index); +void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8_t end); +void rgblight_sethsv_range(uint8_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end); +void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b); + +#ifndef RGBLIGHT_SPLIT +void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b); +void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b); +void rgblight_sethsv_master(uint8_t hue, uint8_t sat, uint8_t val); +void rgblight_sethsv_slave(uint8_t hue, uint8_t sat, uint8_t val); #endif -void rgblight_init(void); +/* effect mode change */ +void rgblight_mode(uint8_t mode); +void rgblight_mode_noeeprom(uint8_t mode); void rgblight_increase(void); void rgblight_decrease(void); +void rgblight_step(void); +void rgblight_step_noeeprom(void); +void rgblight_step_reverse(void); +void rgblight_step_reverse_noeeprom(void); + +/* effects mode disable/enable */ void rgblight_toggle(void); +void rgblight_toggle_noeeprom(void); void rgblight_enable(void); +void rgblight_enable_noeeprom(void); void rgblight_disable(void); -void rgblight_step(void); -void rgblight_step_reverse(void); -uint8_t rgblight_get_mode(void); -void rgblight_mode(uint8_t mode); -void rgblight_set(void); -uint32_t rgblight_read_dword(void); -void rgblight_update_dword(uint32_t dword); +void rgblight_disable_noeeprom(void); + +/* hue, sat, val change */ void rgblight_increase_hue(void); +void rgblight_increase_hue_noeeprom(void); void rgblight_decrease_hue(void); +void rgblight_decrease_hue_noeeprom(void); void rgblight_increase_sat(void); +void rgblight_increase_sat_noeeprom(void); void rgblight_decrease_sat(void); +void rgblight_decrease_sat_noeeprom(void); void rgblight_increase_val(void); +void rgblight_increase_val_noeeprom(void); void rgblight_decrease_val(void); +void rgblight_decrease_val_noeeprom(void); void rgblight_increase_speed(void); void rgblight_decrease_speed(void); void rgblight_sethsv(uint8_t hue, uint8_t sat, uint8_t val); +void rgblight_sethsv_noeeprom(uint8_t hue, uint8_t sat, uint8_t val); + +/* query */ +uint8_t rgblight_get_mode(void); uint8_t rgblight_get_hue(void); uint8_t rgblight_get_sat(void); uint8_t rgblight_get_val(void); -void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b); -void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index); -void rgblight_sethsv_at(uint8_t hue, uint8_t sat, uint8_t val, uint8_t index); -void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8_t end); -void rgblight_sethsv_range(uint8_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end); -void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b); -void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b); -void rgblight_sethsv_master(uint8_t hue, uint8_t sat, uint8_t val); -void rgblight_sethsv_slave(uint8_t hue, uint8_t sat, uint8_t val); -void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds); +/* === qmk_firmware (core)internal Functions === */ +void rgblight_init(void); +uint32_t rgblight_read_dword(void); +void rgblight_update_dword(uint32_t dword); uint32_t eeconfig_read_rgblight(void); void eeconfig_update_rgblight(uint32_t val); void eeconfig_update_rgblight_default(void); @@ -233,27 +251,9 @@ void eeconfig_debug_rgblight(void); void rgb_matrix_increase(void); void rgb_matrix_decrease(void); -void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); -void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1); - -void rgblight_sethsv_noeeprom(uint8_t hue, uint8_t sat, uint8_t val); -void rgblight_mode_noeeprom(uint8_t mode); -void rgblight_toggle_noeeprom(void); -void rgblight_enable_noeeprom(void); -void rgblight_disable_noeeprom(void); -void rgblight_step_noeeprom(void); -void rgblight_step_reverse_noeeprom(void); -void rgblight_increase_hue_noeeprom(void); -void rgblight_decrease_hue_noeeprom(void); -void rgblight_increase_sat_noeeprom(void); -void rgblight_decrease_sat_noeeprom(void); -void rgblight_increase_val_noeeprom(void); -void rgblight_decrease_val_noeeprom(void); - void rgblight_sethsv_eeprom_helper(uint8_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom); void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom); - #define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF) void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b); @@ -264,6 +264,25 @@ void rgblight_timer_enable(void); void rgblight_timer_disable(void); void rgblight_timer_toggle(void); +#ifdef RGBLIGHT_SPLIT + #define RGBLIGHT_STATUS_CHANGE_MODE (1<<0) + #define RGBLIGHT_STATUS_CHANGE_HSVS (1<<1) + #define RGBLIGHT_STATUS_CHANGE_TIMER (1<<2) + #define RGBLIGHT_STATUS_ANIMATION_TICK (1<<3) + + typedef struct _rgblight_syncinfo_t { + rgblight_config_t config; + rgblight_status_t status; + } rgblight_syncinfo_t; + + /* for split keyboard master side */ + uint8_t rgblight_get_change_flags(void); + void rgblight_clear_change_flags(void); + void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo); + /* for split keyboard slave side */ + void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom); +#endif + #ifdef RGBLIGHT_USE_TIMER typedef struct _animation_status_t { -- cgit v1.2.3-70-g09d2 From b541369c45f13369c16de1b887f6ca5b7e589e6d Mon Sep 17 00:00:00 2001 From: Pavlos Vinieratos Date: Thu, 16 May 2019 17:21:51 +0200 Subject: [Docs] Fix typo in Userspace doc (#5871) * typo * Update docs/feature_userspace.md Co-Authored-By: fauxpark --- docs/feature_userspace.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_userspace.md b/docs/feature_userspace.md index d82d43138..2f119c8bd 100644 --- a/docs/feature_userspace.md +++ b/docs/feature_userspace.md @@ -110,7 +110,7 @@ QMK has a bunch of [functions](custom_quantum_functions.md) that have [`_quantum However, you can actually add support for keymap version, so that you can use it in both your userspace and your keymap! -For instance, lets looks at the `layer_state_set_user` function. Lets enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionalitly to all of our boards, and then still have your `keymap.c` still able to use this functionality. +For instance, let's look at the `layer_state_set_user()` function. You can enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionality on all of your boards, while also retaining the Tri Layer functionality in your `keymap.c` files. In your `` file, you'd want to add this: ```c -- cgit v1.2.3-70-g09d2 From 48b01446ba6b74d7e0793f972873a10fceef2f62 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 16 May 2019 10:28:06 -0700 Subject: Make delay for Capslock in Hold-Tap functions configurable (#5497) * Increase delay for Hold-Tap register for CAPSLOCK Because it seems that the 80ms delay wasn't too much * Screw it, make the caps delay a define and make it configurable --- docs/config_options.md | 2 ++ tmk_core/common/action.c | 10 +++++++++- 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index 3ef00394d..cab3c0747 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -171,6 +171,8 @@ If you define these options you will enable the associated feature, which may in * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined. * `#define TAP_CODE_DELAY 100` * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds. +* `#define TAP_HOLD_CAPS_DELAY 200` + * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPSLOCK` keycode, as this has some special handling on MacOS. The value is in milliseconds, and defaults to 200ms if not defined. ## RGB Light Configuration diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index d4d4ac28d..bb4e66c9c 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -44,6 +44,9 @@ int retro_tapping_counter = 0; #include #endif +#ifndef TAP_HOLD_CAPS_DELAY +# define TAP_HOLD_CAPS_DELAY 200 +#endif /** \brief Called to execute an action. * * FIXME: Needs documentation. @@ -518,7 +521,7 @@ void process_action(keyrecord_t *record, action_t action) if (tap_count > 0) { dprint("KEYMAP_TAP_KEY: Tap: unregister_code\n"); if (action.layer_tap.code == KC_CAPS) { - wait_ms(80); + wait_ms(TAP_HOLD_CAPS_DELAY); } unregister_code(action.layer_tap.code); } else { @@ -853,8 +856,13 @@ void unregister_code(uint8_t code) */ void tap_code(uint8_t code) { register_code(code); + if (code == KC_CAPS) { + wait_ms(TAP_HOLD_CAPS_DELAY); + } #if TAP_CODE_DELAY > 0 + else { wait_ms(TAP_CODE_DELAY); + } #endif unregister_code(code); } -- cgit v1.2.3-70-g09d2 From d85110b6ec5fcdf3ef88b41909ce739b017abbea Mon Sep 17 00:00:00 2001 From: Josh Date: Fri, 17 May 2019 16:48:53 -0400 Subject: Adds a configurable initial delay to the audio clicky feature (#4286) * Adding an AUDIO_CLICKY_DELAY_DURATION configurable value to the AUDIO_CLICKY feature. * Tweaking my community keymap to work better with my rev 4 planck. --- docs/feature_audio.md | 3 ++- layouts/community/ortho_4x12/mindsound/config.h | 5 +++-- quantum/process_keycode/process_clicky.c | 11 ++++++++--- 3 files changed, 13 insertions(+), 6 deletions(-) (limited to 'docs') diff --git a/docs/feature_audio.md b/docs/feature_audio.md index e1dd4c5a8..7511598bc 100644 --- a/docs/feature_audio.md +++ b/docs/feature_audio.md @@ -175,8 +175,9 @@ You can configure the default, min and max frequencies, the stepping and built i | `AUDIO_CLICKY_FREQ_DEFAULT` | 440.0f | Sets the default/starting audio frequency for the clicky sounds. | | `AUDIO_CLICKY_FREQ_MIN` | 65.0f | Sets the lowest frequency (under 60f are a bit buggy). | | `AUDIO_CLICKY_FREQ_MAX` | 1500.0f | Sets the the highest frequency. Too high may result in coworkers attacking you. | -| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes. | +| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes. This is a multiplicative factor. The default steps the frequency up/down by a musical minor third. | | `AUDIO_CLICKY_FREQ_RANDOMNESS` | 0.05f | Sets a factor of randomness for the clicks, Setting this to `0f` will make each click identical, and `1.0f` will make this sound much like the 90's computer screen scrolling/typing effect. | +| `AUDIO_CLICKY_DELAY_DURATION` | 1 | An integer note duration where 1 is 1/16th of the tempo, or a sixty-fourth note (see `quantum/audio/musical_notes.h` for implementation details). The main clicky effect will be delayed by this duration. Adjusting this to values around 6-12 will help compensate for loud switches. | diff --git a/layouts/community/ortho_4x12/mindsound/config.h b/layouts/community/ortho_4x12/mindsound/config.h index 76e7da204..e615fe77e 100644 --- a/layouts/community/ortho_4x12/mindsound/config.h +++ b/layouts/community/ortho_4x12/mindsound/config.h @@ -15,9 +15,10 @@ #define STARTUP_SONG SONG(ADVENTURE_TIME) #define AUDIO_CLICKY #define AUDIO_CLICKY_ON + #define AUDIO_CLICKY_DELAY_DURATION 0 #define AUDIO_CLICKY_FREQ_MAX 2500.0f - #define AUDIO_CLICKY_FREQ_RANDOMNESS 0.2f - #define AUDIO_CLICKY_FREQ_DEFAULT 110.0f + #define AUDIO_CLICKY_FREQ_RANDOMNESS 0.3f + #define AUDIO_CLICKY_FREQ_DEFAULT 880.0f #endif // for some reason the LSvi rev1 disables action tapping... diff --git a/quantum/process_keycode/process_clicky.c b/quantum/process_keycode/process_clicky.c index 12fef51f9..43b803afe 100644 --- a/quantum/process_keycode/process_clicky.c +++ b/quantum/process_keycode/process_clicky.c @@ -3,6 +3,9 @@ #ifdef AUDIO_CLICKY +#ifndef AUDIO_CLICKY_DELAY_DURATION +#define AUDIO_CLICKY_DELAY_DURATION 1 +#endif // !AUDIO_CLICKY_DELAY_DURATION #ifndef AUDIO_CLICKY_FREQ_DEFAULT #define AUDIO_CLICKY_FREQ_DEFAULT 440.0f #endif // !AUDIO_CLICKY_FREQ_DEFAULT @@ -21,7 +24,9 @@ float clicky_freq = AUDIO_CLICKY_FREQ_DEFAULT; float clicky_rand = AUDIO_CLICKY_FREQ_RANDOMNESS; -float clicky_song[][2] = {{AUDIO_CLICKY_FREQ_DEFAULT, 3}, {AUDIO_CLICKY_FREQ_DEFAULT, 1}}; // 3 and 1 --> durations + +// the first "note" is an intentional delay; the 2nd and 3rd notes are the "clicky" +float clicky_song[][2] = {{AUDIO_CLICKY_FREQ_MIN, AUDIO_CLICKY_DELAY_DURATION}, {AUDIO_CLICKY_FREQ_DEFAULT, 3}, {AUDIO_CLICKY_FREQ_DEFAULT, 1}}; // 3 and 1 --> durations extern audio_config_t audio_config; @@ -34,8 +39,8 @@ void clicky_play(void) { #ifndef NO_MUSIC_MODE if (music_activated || midi_activated || !audio_config.enable) return; #endif // !NO_MUSIC_MODE - clicky_song[0][0] = 2.0f * clicky_freq * (1.0f + clicky_rand * ( ((float)rand()) / ((float)(RAND_MAX)) ) ); - clicky_song[1][0] = clicky_freq * (1.0f + clicky_rand * ( ((float)rand()) / ((float)(RAND_MAX)) ) ); + clicky_song[1][0] = 2.0f * clicky_freq * (1.0f + clicky_rand * ( ((float)rand()) / ((float)(RAND_MAX)) ) ); + clicky_song[2][0] = clicky_freq * (1.0f + clicky_rand * ( ((float)rand()) / ((float)(RAND_MAX)) ) ); PLAY_SONG(clicky_song); } -- cgit v1.2.3-70-g09d2 From 0099bbf9a64a0b4df1093f528481bff39af2c80d Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 19 May 2019 11:09:06 -0500 Subject: Single Color Band scrolling left to right effects (#5867) --- docs/feature_rgb_matrix.md | 4 ++++ quantum/rgb_matrix_animations/colorband_sat_anim.h | 21 +++++++++++++++++++++ quantum/rgb_matrix_animations/colorband_val_anim.h | 21 +++++++++++++++++++++ .../rgb_matrix_animations/rgb_matrix_effects.inc | 2 ++ 4 files changed, 48 insertions(+) create mode 100644 quantum/rgb_matrix_animations/colorband_sat_anim.h create mode 100644 quantum/rgb_matrix_animations/colorband_val_anim.h (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 8347660df..df124ea0f 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -194,6 +194,8 @@ enum rgb_matrix_effects { RGB_MATRIX_ALPHAS_MODS, // Static dual hue, speed is hue for secondary hue RGB_MATRIX_GRADIENT_UP_DOWN, // Static gradient top to bottom, speed controls how much gradient changes RGB_MATRIX_BREATHING, // Single hue brightness cycling animation + RGB_MATRIX_BAND_SAT, // Single hue band fading saturation scrolling left to right + RGB_MATRIX_BAND_VAL, // Single hue band fading brightness scrolling left to right RGB_MATRIX_CYCLE_ALL, // Full keyboard solid hue cycling through full gradient RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right RGB_MATRIX_CYCLE_UP_DOWN, // Full gradient scrolling top to bottom @@ -235,6 +237,8 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` | |`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` | |`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` | +|`#define DISABLE_RGB_MATRIX_BAND_SAT` |Disables `RGB_MATRIX_BAND_SAT` | +|`#define DISABLE_RGB_MATRIX_BAND_VAL` |Disables `RGB_MATRIX_BAND_VAL` | |`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | diff --git a/quantum/rgb_matrix_animations/colorband_sat_anim.h b/quantum/rgb_matrix_animations/colorband_sat_anim.h new file mode 100644 index 000000000..89773b6ce --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_sat_anim.h @@ -0,0 +1,21 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_SAT +RGB_MATRIX_EFFECT(BAND_SAT) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_SAT(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, 0, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t s = rgb_matrix_config.sat - abs(scale8(g_led_config.point[i].x, 228) + 28 - time) * 8; + hsv.s = s < 0 ? 0 : s; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_SAT diff --git a/quantum/rgb_matrix_animations/colorband_val_anim.h b/quantum/rgb_matrix_animations/colorband_val_anim.h new file mode 100644 index 000000000..bf41cec91 --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_val_anim.h @@ -0,0 +1,21 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_VAL +RGB_MATRIX_EFFECT(BAND_VAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_VAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t v = rgb_matrix_config.val - abs(scale8(g_led_config.point[i].x, 228) + 28 - time) * 8; + hsv.v = v < 0 ? 0 : v; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_VAL diff --git a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc index f05a415a5..4b01afaa3 100644 --- a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc +++ b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc @@ -3,6 +3,8 @@ #include "rgb_matrix_animations/alpha_mods_anim.h" #include "rgb_matrix_animations/gradient_up_down_anim.h" #include "rgb_matrix_animations/breathing_anim.h" +#include "rgb_matrix_animations/colorband_sat_anim.h" +#include "rgb_matrix_animations/colorband_val_anim.h" #include "rgb_matrix_animations/cycle_all_anim.h" #include "rgb_matrix_animations/cycle_left_right_anim.h" #include "rgb_matrix_animations/cycle_up_down_anim.h" -- cgit v1.2.3-70-g09d2 From 270b39b2eb44247cff75ddd216a8e67f8f264991 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 19 May 2019 11:19:46 -0500 Subject: Spirals, Pinwheels, and Documentation....Oh My! RGB Matrix Effects (#5877) * Spirals, Pinwheels, and Documentation....Oh My! * Spiral effect band thickness adjustments * Fixing animation spin directions --- docs/feature_rgb_matrix.md | 12 +++++++++++ lib/lib8tion/trig8.h | 25 ++++++++++++++++++++++ .../colorband_pinwheel_sat_anim.h | 22 +++++++++++++++++++ .../colorband_pinwheel_val_anim.h | 22 +++++++++++++++++++ .../colorband_spiral_sat_anim.h | 23 ++++++++++++++++++++ .../colorband_spiral_val_anim.h | 23 ++++++++++++++++++++ .../rgb_matrix_animations/cycle_pinwheel_anim.h | 22 +++++++++++++++++++ quantum/rgb_matrix_animations/cycle_spiral_anim.h | 23 ++++++++++++++++++++ .../rgb_matrix_animations/rgb_matrix_effects.inc | 6 ++++++ 9 files changed, 178 insertions(+) create mode 100644 quantum/rgb_matrix_animations/colorband_pinwheel_sat_anim.h create mode 100644 quantum/rgb_matrix_animations/colorband_pinwheel_val_anim.h create mode 100644 quantum/rgb_matrix_animations/colorband_spiral_sat_anim.h create mode 100644 quantum/rgb_matrix_animations/colorband_spiral_val_anim.h create mode 100644 quantum/rgb_matrix_animations/cycle_pinwheel_anim.h create mode 100644 quantum/rgb_matrix_animations/cycle_spiral_anim.h (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index df124ea0f..18636776c 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -196,12 +196,18 @@ enum rgb_matrix_effects { RGB_MATRIX_BREATHING, // Single hue brightness cycling animation RGB_MATRIX_BAND_SAT, // Single hue band fading saturation scrolling left to right RGB_MATRIX_BAND_VAL, // Single hue band fading brightness scrolling left to right + RGB_MATRIX_BAND_PINWHEEL_SAT, // Single hue 3 blade spinning pinwheel fades saturation + RGB_MATRIX_BAND_PINWHEEL_VAL, // Single hue 3 blade spinning pinwheel fades brightness + RGB_MATRIX_BAND_SPIRAL_SAT, // Single hue spinning spiral fades saturation + RGB_MATRIX_BAND_SPIRAL_VAL, // Single hue spinning spiral fades brightness RGB_MATRIX_CYCLE_ALL, // Full keyboard solid hue cycling through full gradient RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right RGB_MATRIX_CYCLE_UP_DOWN, // Full gradient scrolling top to bottom RGB_MATRIX_CYCLE_OUT_IN, // Full gradient scrolling out to in RGB_MATRIX_CYCLE_OUT_IN_DUAL, // Full dual gradients scrolling out to in RGB_MATRIX_RAINBOW_MOVING_CHEVRON, // Full gradent Chevron shapped scrolling left to right + RGB_MATRIX_CYCLE_PINWHEEL, // Full gradient spinning pinwheel around center of keyboard + RGB_MATRIX_CYCLE_SPIRAL, // Full gradient spinning spiral around center of keyboard RGB_MATRIX_DUAL_BEACON, // Full gradient spinning around center of keyboard RGB_MATRIX_RAINBOW_BEACON, // Full tighter gradient spinning around center of keyboard RGB_MATRIX_RAINBOW_PINWHEELS, // Full dual gradients spinning two halfs of keyboard @@ -239,6 +245,10 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` | |`#define DISABLE_RGB_MATRIX_BAND_SAT` |Disables `RGB_MATRIX_BAND_SAT` | |`#define DISABLE_RGB_MATRIX_BAND_VAL` |Disables `RGB_MATRIX_BAND_VAL` | +|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT` |Disables `RGB_MATRIX_BAND_PINWHEEL_SAT` | +|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL` |Disables `RGB_MATRIX_BAND_PINWHEEL_VAL` | +|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT` |Disables `RGB_MATRIX_BAND_SPIRAL_SAT` | +|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL` |Disables `RGB_MATRIX_BAND_SPIRAL_VAL` | |`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | @@ -246,6 +256,8 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL` |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL` | |`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON` |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON` | |`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | +|`#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL` |Disables `RGB_MATRIX_CYCLE_PINWHEEL` | +|`#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL` |Disables `RGB_MATRIX_CYCLE_SPIRAL` | |`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` | |`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` | |`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` | diff --git a/lib/lib8tion/trig8.h b/lib/lib8tion/trig8.h index 6ef3ce625..cfba6373f 100644 --- a/lib/lib8tion/trig8.h +++ b/lib/lib8tion/trig8.h @@ -255,5 +255,30 @@ LIB8STATIC uint8_t cos8( uint8_t theta) return sin8( theta + 64); } +/// Fast 16-bit approximation of atan2(x). +/// @returns atan2, value between 0 and 255 +LIB8STATIC uint8_t atan2_8(int16_t dy, int16_t dx) +{ + if (dy == 0) + { + if (dx >= 0) + return 0; + else + return 128; + } + + int16_t abs_y = dy > 0 ? dy : -dy; + int8_t a; + + if (dx >= 0) + a = 32 - (32 * (dx - abs_y) / (dx + abs_y)); + else + a = 96 - (32 * (dx + abs_y) / (abs_y - dx)); + + if (dy < 0) + return -a; // negate if in quad III or IV + return a; +} + ///@} #endif diff --git a/quantum/rgb_matrix_animations/colorband_pinwheel_sat_anim.h b/quantum/rgb_matrix_animations/colorband_pinwheel_sat_anim.h new file mode 100644 index 000000000..3e6df1fbe --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_pinwheel_sat_anim.h @@ -0,0 +1,22 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +RGB_MATRIX_EFFECT(BAND_PINWHEEL_SAT) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_PINWHEEL_SAT(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, 0, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + hsv.s = rgb_matrix_config.sat - time - atan2_8(dy, dx) * 3; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT diff --git a/quantum/rgb_matrix_animations/colorband_pinwheel_val_anim.h b/quantum/rgb_matrix_animations/colorband_pinwheel_val_anim.h new file mode 100644 index 000000000..88cc7d1f2 --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_pinwheel_val_anim.h @@ -0,0 +1,22 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +RGB_MATRIX_EFFECT(BAND_PINWHEEL_VAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_PINWHEEL_VAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + hsv.v = rgb_matrix_config.val - time - atan2_8(dy, dx) * 3; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL diff --git a/quantum/rgb_matrix_animations/colorband_spiral_sat_anim.h b/quantum/rgb_matrix_animations/colorband_spiral_sat_anim.h new file mode 100644 index 000000000..44955900a --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_spiral_sat_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +RGB_MATRIX_EFFECT(BAND_SPIRAL_SAT) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_SPIRAL_SAT(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, 0, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.s = rgb_matrix_config.sat + dist - time - atan2_8(dy, dx); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT diff --git a/quantum/rgb_matrix_animations/colorband_spiral_val_anim.h b/quantum/rgb_matrix_animations/colorband_spiral_val_anim.h new file mode 100644 index 000000000..5aea0c8da --- /dev/null +++ b/quantum/rgb_matrix_animations/colorband_spiral_val_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +RGB_MATRIX_EFFECT(BAND_SPIRAL_VAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool BAND_SPIRAL_VAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.v = rgb_matrix_config.val + dist - time - atan2_8(dy, dx); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL diff --git a/quantum/rgb_matrix_animations/cycle_pinwheel_anim.h b/quantum/rgb_matrix_animations/cycle_pinwheel_anim.h new file mode 100644 index 000000000..59d60ac07 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_pinwheel_anim.h @@ -0,0 +1,22 @@ +#ifndef DISABLE_RGB_MATRIX_CYCLE_PINWHEEL +RGB_MATRIX_EFFECT(CYCLE_PINWHEEL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool CYCLE_PINWHEEL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + hsv.h = atan2_8(dy, dx) + time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_CYCLE_PINWHEEL diff --git a/quantum/rgb_matrix_animations/cycle_spiral_anim.h b/quantum/rgb_matrix_animations/cycle_spiral_anim.h new file mode 100644 index 000000000..865309c25 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_spiral_anim.h @@ -0,0 +1,23 @@ +#ifndef DISABLE_RGB_MATRIX_CYCLE_SPIRAL +RGB_MATRIX_EFFECT(CYCLE_SPIRAL) +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool CYCLE_SPIRAL(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 2); + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_TEST_LED_FLAGS(); + int16_t dx = g_led_config.point[i].x - 112; + int16_t dy = g_led_config.point[i].y - 32; + uint8_t dist = sqrt16(dx * dx + dy * dy); + hsv.h = dist - time - atan2_8(dy, dx); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // DISABLE_RGB_MATRIX_CYCLE_SPIRAL diff --git a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc index 4b01afaa3..01332ed0d 100644 --- a/quantum/rgb_matrix_animations/rgb_matrix_effects.inc +++ b/quantum/rgb_matrix_animations/rgb_matrix_effects.inc @@ -5,12 +5,18 @@ #include "rgb_matrix_animations/breathing_anim.h" #include "rgb_matrix_animations/colorband_sat_anim.h" #include "rgb_matrix_animations/colorband_val_anim.h" +#include "rgb_matrix_animations/colorband_pinwheel_sat_anim.h" +#include "rgb_matrix_animations/colorband_pinwheel_val_anim.h" +#include "rgb_matrix_animations/colorband_spiral_sat_anim.h" +#include "rgb_matrix_animations/colorband_spiral_val_anim.h" #include "rgb_matrix_animations/cycle_all_anim.h" #include "rgb_matrix_animations/cycle_left_right_anim.h" #include "rgb_matrix_animations/cycle_up_down_anim.h" #include "rgb_matrix_animations/rainbow_moving_chevron_anim.h" #include "rgb_matrix_animations/cycle_out_in_anim.h" #include "rgb_matrix_animations/cycle_out_in_dual_anim.h" +#include "rgb_matrix_animations/cycle_pinwheel_anim.h" +#include "rgb_matrix_animations/cycle_spiral_anim.h" #include "rgb_matrix_animations/dual_beacon_anim.h" #include "rgb_matrix_animations/rainbow_beacon_anim.h" #include "rgb_matrix_animations/rainbow_pinwheels_anim.h" -- cgit v1.2.3-70-g09d2 From 5c7b37bbbde969eb056d531c897c1d5f80beeb58 Mon Sep 17 00:00:00 2001 From: Ryan Caltabiano Date: Wed, 15 May 2019 22:23:42 -0500 Subject: Added custom center point to rgb matrix --- docs/feature_rgb_matrix.md | 6 ++++-- quantum/rgb_matrix.c | 6 ++++++ quantum/rgb_matrix_animations/cycle_out_in_anim.h | 4 ++-- quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h | 4 ++-- quantum/rgb_matrix_animations/dual_beacon_anim.h | 2 +- quantum/rgb_matrix_animations/rainbow_beacon_anim.h | 2 +- quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h | 2 +- 7 files changed, 17 insertions(+), 9 deletions(-) (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 18636776c..8f0cd12b3 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -144,14 +144,16 @@ const led_config_t g_led_config = { { } }; ``` -The first part, `// Key Matrix to LED Index`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `// LED Index to Physical Position` represents the LED's physical position on the keyboard. The first value, `x`, is between 0-224 (inclusive), and the second value, `y`, is between 0-64 (inclusive). This range is due to effect that calculate the center or halves for their animations. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents x, y coordinate 0, 0 and the bottom right of your keyboard represents 224, 64. Using this as a basis, you can use the following formula to calculate the physical position: +The first part, `// Key Matrix to LED Index`, tells the system what key this LED represents by using the key's electrical matrix row & col. The second part, `// LED Index to Physical Position` represents the LED's physical `{ x, y }` position on the keyboard. The default expected range of values for `{ x, y }` is the inclusive range `{ 0..224, 0..64 }`. This default expected range is due to effects that calculate the center of the keyboard for their animations. The easiest way to calculate these positions is imagine your keyboard is a grid, and the top left of the keyboard represents `{ x, y }` coordinate `{ 0, 0 }` and the bottom right of your keyboard represents `{ 224, 64 }`. Using this as a basis, you can use the following formula to calculate the physical position: ```C x = 224 / (NUMBER_OF_COLS - 1) * COL_POSITION y = 64 / (NUMBER_OF_ROWS - 1) * ROW_POSITION ``` -Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout. +Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout. + +As mentioned earlier, the center of the keyboard by default is expected to be `{ 112, 32 }`, but this can be changed if you want to more accurately calculate the LED's physical `{ x, y }` positions. Keyboard designers can implement `#define RGB_MATRIX_CENTER { 112, 32 }` in their config.h file with the new center point of the keyboard, or where they want it to be allowing more possibilities for the `{ x, y }` values. Do note that the maximum value for x or y is 255, and the recommended maximum is 224 as this gives animations runoff room before they reset. `// LED Index to Flag` is a bitmask, whether or not a certain LEDs is of a certain type. It is recommended that LEDs are set to only 1 type. diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c index 9b9932df5..a6a9549af 100644 --- a/quantum/rgb_matrix.c +++ b/quantum/rgb_matrix.c @@ -26,6 +26,12 @@ #include "lib/lib8tion/lib8tion.h" +#ifndef RGB_MATRIX_CENTER + const point_t k_rgb_matrix_center = { 112, 32 }; +#else + const point_t k_rgb_matrix_center = RGB_MATRIX_CENTER; +#endif + // ------------------------------------------ // -----Begin rgb effect includes macros----- #define RGB_MATRIX_EFFECT(name) diff --git a/quantum/rgb_matrix_animations/cycle_out_in_anim.h b/quantum/rgb_matrix_animations/cycle_out_in_anim.h index dc9d09fd3..29209e4d7 100644 --- a/quantum/rgb_matrix_animations/cycle_out_in_anim.h +++ b/quantum/rgb_matrix_animations/cycle_out_in_anim.h @@ -9,8 +9,8 @@ bool CYCLE_OUT_IN(effect_params_t* params) { uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - int16_t dx = g_led_config.point[i].x - 112; - int16_t dy = g_led_config.point[i].y - 32; + int16_t dx = g_led_config.point[i].x - k_rgb_matrix_center.x; + int16_t dy = g_led_config.point[i].y - k_rgb_matrix_center.y; uint8_t dist = sqrt16(dx * dx + dy * dy); hsv.h = 3 * dist / 2 + time; RGB rgb = hsv_to_rgb(hsv); diff --git a/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h b/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h index 941e6b9a8..b2f79ceea 100644 --- a/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h +++ b/quantum/rgb_matrix_animations/cycle_out_in_dual_anim.h @@ -9,8 +9,8 @@ bool CYCLE_OUT_IN_DUAL(effect_params_t* params) { uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - int16_t dx = 56 - abs8(g_led_config.point[i].x - 112); - int16_t dy = g_led_config.point[i].y - 32; + int16_t dx = (k_rgb_matrix_center.x / 2) - abs8(g_led_config.point[i].x - k_rgb_matrix_center.x); + int16_t dy = g_led_config.point[i].y - k_rgb_matrix_center.y; uint8_t dist = sqrt16(dx * dx + dy * dy); hsv.h = 3 * dist + time; RGB rgb = hsv_to_rgb(hsv); diff --git a/quantum/rgb_matrix_animations/dual_beacon_anim.h b/quantum/rgb_matrix_animations/dual_beacon_anim.h index f853f71ec..59c91046d 100644 --- a/quantum/rgb_matrix_animations/dual_beacon_anim.h +++ b/quantum/rgb_matrix_animations/dual_beacon_anim.h @@ -11,7 +11,7 @@ bool DUAL_BEACON(effect_params_t* params) { int8_t sin_value = sin8(time) - 128; for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - hsv.h = ((g_led_config.point[i].y - 32) * cos_value + (g_led_config.point[i].x - 112) * sin_value) / 128 + rgb_matrix_config.hue; + hsv.h = ((g_led_config.point[i].y - k_rgb_matrix_center.y) * cos_value + (g_led_config.point[i].x - k_rgb_matrix_center.x) * sin_value) / 128 + rgb_matrix_config.hue; RGB rgb = hsv_to_rgb(hsv); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } diff --git a/quantum/rgb_matrix_animations/rainbow_beacon_anim.h b/quantum/rgb_matrix_animations/rainbow_beacon_anim.h index a0e0f814c..564e3c480 100644 --- a/quantum/rgb_matrix_animations/rainbow_beacon_anim.h +++ b/quantum/rgb_matrix_animations/rainbow_beacon_anim.h @@ -11,7 +11,7 @@ bool RAINBOW_BEACON(effect_params_t* params) { int16_t sin_value = 2 * (sin8(time) - 128); for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - hsv.h = ((g_led_config.point[i].y - 32) * cos_value + (g_led_config.point[i].x - 112) * sin_value) / 128 + rgb_matrix_config.hue; + hsv.h = ((g_led_config.point[i].y - k_rgb_matrix_center.y) * cos_value + (g_led_config.point[i].x - k_rgb_matrix_center.x) * sin_value) / 128 + rgb_matrix_config.hue; RGB rgb = hsv_to_rgb(hsv); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } diff --git a/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h b/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h index 275aaa48d..7d189b927 100644 --- a/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h +++ b/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h @@ -11,7 +11,7 @@ bool PINWHEELS(effect_params_t* params) { int16_t sin_value = 3 * (sin8(time) - 128); for (uint8_t i = led_min; i < led_max; i++) { RGB_MATRIX_TEST_LED_FLAGS(); - hsv.h = ((g_led_config.point[i].y - 32) * cos_value + (56 - abs8(g_led_config.point[i].x - 112)) * sin_value) / 128 + rgb_matrix_config.hue; + hsv.h = ((g_led_config.point[i].y - k_rgb_matrix_center.y) * cos_value + (56 - abs8(g_led_config.point[i].x - k_rgb_matrix_center.x)) * sin_value) / 128 + rgb_matrix_config.hue; RGB rgb = hsv_to_rgb(hsv); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } -- cgit v1.2.3-70-g09d2 From 02787ac07f29ecb05a53dc986c215e177ee11d1d Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 21 May 2019 13:15:59 -0700 Subject: Add missing links to features page and sidebar section --- docs/_summary.md | 3 +++ docs/features.md | 5 +++++ 2 files changed, 8 insertions(+) (limited to 'docs') diff --git a/docs/_summary.md b/docs/_summary.md index 043943f1d..1c3153b04 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -54,9 +54,12 @@ * [Bootmagic](feature_bootmagic.md) * [Combos](feature_combo) * [Command](feature_command.md) + * [Debounce API](feature_debuonce.md) * [Dynamic Macros](feature_dynamic_macros.md) * [Encoders](feature_encoders.md) * [Grave Escape](feature_grave_esc.md) + * [Haptic Feedback](feature_haptic_feedback.md) + * [HD44780 LED](feature_hd44780.md) * [Key Lock](feature_key_lock.md) * [Layouts](feature_layouts.md) * [Leader Key](feature_leader_key.md) diff --git a/docs/features.md b/docs/features.md index cb69df35d..eb3f26d6a 100644 --- a/docs/features.md +++ b/docs/features.md @@ -7,12 +7,15 @@ QMK has a staggering number of features for building your keyboard. It can take * [Audio](feature_audio.md) - Connect a speaker to your keyboard for audio feedback, midi support, and music mode. * [Auto Shift](feature_auto_shift.md) - Tap for the normal key, hold slightly longer for its shifted state. * [Backlight](feature_backlight.md) - LED lighting support for your keyboard. +* [Bluetooth](feature_bluetooth.md) - BlueTooth support for your keyboard. * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys. * [Combos](feature_combo.md) - Custom actions for multiple key holds. * [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic"). +* [Debounce API](feature_debuonce.md) - Customization of debouncing algorithms, and the ability to add more/custom debouncing. * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself. * [Encoders](feature_encoders.md) - Rotary encoders! * [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. +* [Haptic Feedback](feature_haptic_feedback.md) - Add haptic feedback drivers to your board. * [HD44780 LCD Display](feature_hd44780.md) - Support for LCD character displays using the HD44780 standard. * [Key Lock](feature_key_lock.md) - Lock a key in the "down" state. * [Layouts](feature_layouts.md) - Use one keymap with any keyboard that supports your layout. @@ -20,6 +23,7 @@ QMK has a staggering number of features for building your keyboard. It can take * [LED Matrix](feature_led_matrix.md) - LED Matrix single color lights for per key lighting (Single Color, not RGB). * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key. * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard. +* [OLED Driver](feature_oled_driver) - Add OLED screens to your keyboard. * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it. * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard. * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard. @@ -33,3 +37,4 @@ QMK has a staggering number of features for building your keyboard. It can take * [Thermal Printer](feature_thermal_printer.md) - Connect a thermal printer to your keyboard to be able to toggle on a printed log of everything you type. * [Unicode](feature_unicode.md) - Unicode input support. * [Userspace](feature_userspace.md) - Share code between different keymaps and keyboards. +* [Velocikey](feature_velocikey.md) - Allows changes in animation speed based on WPM/Typing speed. -- cgit v1.2.3-70-g09d2 From 894010786c4a78b939df7114d1c3e70957a8a300 Mon Sep 17 00:00:00 2001 From: ymzcdg <49898694+ymzcdg@users.noreply.github.com> Date: Thu, 23 May 2019 05:33:10 +0800 Subject: translate docs into Mandarin Chinese (#5890) * translate docs into Mandarin Chinese translate faq_debug.md into Chinese * translate faq_build.md into Chinese translate faq_build.md into Chinese * faq_keymap.md to zh-cn faq_keymap.md to zh-cn --- docs/zh-cn/faq_build.md | 150 ++++++++++++++++++++++++++++++ docs/zh-cn/faq_debug.md | 233 +++++++++++++++++++++++++++++++++++++++++++++++ docs/zh-cn/faq_keymap.md | 212 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 595 insertions(+) create mode 100644 docs/zh-cn/faq_build.md create mode 100644 docs/zh-cn/faq_debug.md create mode 100644 docs/zh-cn/faq_keymap.md (limited to 'docs') diff --git a/docs/zh-cn/faq_build.md b/docs/zh-cn/faq_build.md new file mode 100644 index 000000000..60d902007 --- /dev/null +++ b/docs/zh-cn/faq_build.md @@ -0,0 +1,150 @@ +# 关于构建的常见问题 + +本页所写是QMK构建的常见问题.如果你还没有进行过编译,就看一下[构建环境搭建](getting_started_build_tools.md) 和 [make的说明](getting_started_make_guide.md). + +## 如果您不能在Linux上编程 +您需要适当的权限才能操作设备。对于Linux用户, 请参阅下方有关`udev`规则的说明。如果您对`udev`有问题，解决方法是用`sudo`命令。如果您不熟悉此命令，使用`man sudo`查看其手册或[看这个网页](https://linux.die.net/man/8/sudo). + +在你的主控是ATMega32u4时，以下是使用`sudo`命令的样例： + + $ sudo dfu-programmer atmega32u4 erase --force + $ sudo dfu-programmer atmega32u4 flash your.hex + $ sudo dfu-programmer atmega32u4 reset + +或只用； + + $ sudo make ::dfu + +使用`sudo`运行`make`一般来说**不**推荐，如果可能，尽量使用前一种方法之一。 + +### Linux `udev` 规则 +在Linux上，您需要适当的权限才能访问MCU。你也可以在刷新固件时使用 `sudo`，或把这些文件放到`/etc/udev/rules.d/`。 + +**/etc/udev/rules.d/50-atmel-dfu.rules:** +``` +# Atmel ATMega32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", MODE:="0666" +# Atmel USBKEY AT90USB1287 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", MODE:="0666" +# Atmel ATMega32U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="0666" +``` + +**/etc/udev/rules.d/52-tmk-keyboard.rules:** +``` +# tmk键盘产品 https://github.com/tmk/tmk_keyboard +SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666" +``` +**/etc/udev/rules.d/54-input-club-keyboard.rules:** + +``` +# Input Club keyboard bootloader +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666" +``` + +### 串行设备在Linux上检测不到bootloader模式 +确保您的内核对您的设备有相应的支持。 如果你的设备是 USB ACM, 比如Pro Micro (Atmega32u4)，就要加上`CONFIG_USB_ACM=y`. 其他设备可能需要`USB_SERIAL` 及其任何子选项。 + +## DFU Bootloader的未知设备 + +如果您在使用Windows来刷新键盘的时候碰到了问题，检查设备管理器。如果在键盘处于 "bootloader模式"时你看到 "未知设备"，说明你可能面临设备问题。 + +重新运行MSYS2上的安装脚本或许会凑效（比如在MSYS2/WSL运行 `./util/qmk_install.sh`) 或者重新安装QMK工具箱也可能会解决你的问题。 + +如果以上方法还是短针攻疽，那您可能需要使用[Zadig Utility](https://zadig.akeo.ie/)。下载此程序, 找到设备问题, 然后选择 `WinUSB`选项, 然后点击"Reinstall driver"。完成后再试试刷新你的键盘。倘若依然徒劳无功，那就尝试所有选项直到好用为止。 + +?> 事实上没有一个驱动的最佳选择，有些选项就是和某些系统相辅相成。但libUSB和WinUSB似乎也算是这里的最佳选择了。 +如果bootloader在设备列表中没有显示，你可能要使能 "List all devices"选项在选项菜单中`Options`，然后找到有问题的bootloader设备。(译者注：在win10中可能为 查看-显示隐藏的设备) + + +## WINAVR已淘汰 +不再推荐使用WINAVR，使用可能会导致问题 +详情请见[TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99). + +## USB VID 和 PID +你可以在编辑`config.h`时使用任何你想用的ID值。实际上，使用任何可能未使用的ID都没有问题，除了有极低的与其他产品发生冲突的可能性。 + +大多数QMK主板使用`0xFEED`作为vendor ID。您应该查看其他键盘，以确保选择了唯一的Product ID。 + +也要看看这个。 +https://github.com/tmk/tmk_keyboard/issues/150 + +一也可以在下方链接购买一个唯一的VID:PID。不过个人使用似乎用不着这个。 +- http://www.obdev.at/products/vusb/license.html +- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1 + +## Cortex: `cstddef: No such file or directory` +在Ubuntu 14.04上的GCC 4.8 会出现这种问题需要用这个PPA升级到4.9。 +https://launchpad.net/~terry.guo/+archive/ubuntu/gcc-arm-embedded + +https://github.com/tmk/tmk_keyboard/issues/212 +https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef +https://developer.mbed.org/forum/mbed/topic/5205/ + +## `clock_prescale_set` and `clock_div_1` Not Available +你的工具链太旧了不支持MCU。比如WinAVR 20100110就不支持ATMega32u2. + +``` +Compiling C: ../../tmk_core/protocol/lufa/lufa.c +avr-gcc -c -mmcu=atmega32u2 -gdwarf-2 -DF_CPU=16000000UL -DINTERRUPT_CONTROL_ENDPOINT -DBOOTLOADER_SIZE=4096 -DF_USB=16000000UL -DARCH=ARCH_AVR8 -DUSB_DEVICE_ONLY -DUSE_FLASH_DESCRIPTORS -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -DFIXED_CONTROL_ENDPOINT_SIZE=8 -DFIXED_NUM_CONFIGURATIONS=1 -DPROTOCOL_LUFA -DEXTRAKEY_ENABLE -DCONSOLE_ENABLE -DCOMMAND_ENABLE -DVERSION=unknown -Os -funsigned-char -funsigned-bitfields -ffunction-sections -fdata-sections -fno-inline-small-functions -fpack-struct -fshort-enums -fno-strict-aliasing -Wall -Wstrict-prototypes -Wa,-adhlns=obj_alps64/protocol/lufa/lufa.lst -I. -I../../tmk_core -I../../tmk_core/protocol/lufa -I../../tmk_core/protocol/lufa/LUFA-git -I../../tmk_core/common -std=gnu99 -include config.h -MMD -MP -MF .dep/obj_alps64_protocol_lufa_lufa.o.d ../../tmk_core/protocol/lufa/lufa.c -o obj_alps64/protocol/lufa/lufa.o +../../tmk_core/protocol/lufa/lufa.c: In function 'setup_mcu': +../../tmk_core/protocol/lufa/lufa.c:575: warning: implicit declaration of function 'clock_prescale_set' +../../tmk_core/protocol/lufa/lufa.c:575: error: 'clock_div_1' undeclared (first use in this function) +../../tmk_core/protocol/lufa/lufa.c:575: error: (Each undeclared identifier is reported only once +../../tmk_core/protocol/lufa/lufa.c:575: error: for each function it appears in.) +make: *** [obj_alps64/protocol/lufa/lufa.o] Error 1 +``` + + +## AVR的BOOTLOADER_SIZE +注意Teensy2.0++ bootloader的大小是2048字节。有些Makefile注释错了。 + +``` +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 2048 +# Atmel DFU loader 4096 (TMK Alt Controller) +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=2048 +``` + +## 在MacOS上 `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` +这是brew更新的问题，导致AVR GCC依赖的符号链接被损坏。 + +解决方案是移除并重新安装所有受影响的模块。 + +``` +brew rm avr-gcc +brew rm dfu-programmer +brew rm dfu-util +brew rm gcc-arm-none-eabi +brew rm avrdude +brew install avr-gcc +brew install dfu-programmer +brew install dfu-util +brew install gcc-arm-none-eabi +brew install avrdude +``` + +### avr-gcc 8.1 和 LUFA + +如果你把avr-gcc升级到7以上你可能会遇到关于LUFA的问题。比如: + +`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'` + +那你就需要在brew中把avr-gcc回退到7。 + +``` +brew uninstall --force avr-gcc +brew install avr-gcc@7 +brew link --force avr-gcc@7 +``` + +### 我刷新了我的键盘但是键盘不工作/按键没有注册 - 而且还是ARM的 (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019) +由于EEPROM在基于ARM的芯片上的工作原理，保存的设置可能不再有效。这会影响默认层，而且*或许*在某些情况下，会使键盘不好用，我们仍在调查这些情况。重置EEPROM将解决此问题。 + +[Planck rev6键盘重置EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/539284620861243409/planck_rev6_default.bin) 是用于强制重置EEPROM的。刷入这个文件后，再次刷入正常固件，这会将键盘恢复到_正常_工作状态。 +[Preonic rev3键盘重置EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/537849497313738762/preonic_rev3_default.bin) + +如果以任何形式启用了bootmagic， 那么您还需要(看[Bootmagic文档](feature_bootmagic.md) 以及键盘信息，以了解如何执行此操作的详细信息). diff --git a/docs/zh-cn/faq_debug.md b/docs/zh-cn/faq_debug.md new file mode 100644 index 000000000..ca8b3fd25 --- /dev/null +++ b/docs/zh-cn/faq_debug.md @@ -0,0 +1,233 @@ +# 调试的常见问题 + +本篇详细介绍了人们在键盘故障排除时的各种常见问题。 + +# 调试控制台 + +## `hid_listen` 无法识别设备 +当设备的调试控制台未就绪时，您将看到如下内容： + +``` +Waiting for device:......... +``` + +插入设备后，*hid_listen*找到该设备，您将收到以下消息： + +``` +Waiting for new device:......................... +Listening: +``` + +如果您无法获得这条“Listening:”消息，请尝试在[Makefile]中使用 `CONSOLE_ENABLE=yes` + +在Linux这样的操作系统上，你可能需要一些权限。 +- 使用`sudo hid_listen` + +## 控制台没有返回消息 +检查: +- *hid_listen* 找到了你的设备。看前面。 +- 输入**Magic**+d打开调试。详见[Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands)。 +- 设置`debug_enable=true` ，一般存在于**matrix.c**的`matrix_init()`中。 +- 尝试使用'print'函数而不要用调试输出。详见**common/print.h**。 +- 断开其他有控制台功能的设备。 详见[Issue #97](https://github.com/tmk/tmk_keyboard/issues/97)。 + +## Linux或UNIX这样的系统如何请求超级用户权限 +用'sudo'来执行*hid_listen*就有权限了。 +``` +$ sudo hid_listen +``` + +或者把一个文件放到规则文件夹来为TMK设备添加*udev规则*，不同系统的目录可能有所不同。 + +文件: /etc/udev/rules.d/52-tmk-keyboard.rules(在Ubuntu系统的情况下) +``` +# tmk keyboard products https://github.com/tmk/tmk_keyboard +SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666" +``` + +*** + +# 其他 +## 安全注意事项 + +你应该不想要把你的键盘变成"砖头"吧，就是变成没法重写固件的那种。 +下面讲解一些参数来告诉你什么风险很大（其实也不是很大）。 + +- 假如你键盘表面没有设计重置键"RESET", 那你要进入bootloader的话就要按PCB上的RESET了。 + 按PCB上的RESET要拧开键盘底部。 +- 如果 tmk_core / common 里面的文件丢失键盘可能失灵。 +- .hex太大可能不太好; `make dfu` 会删除块，检验大小（咦?好像反了...）。 + 一但出错，刷新键盘失败的话就困在DFU出不去了。 + - 所以, 要知道大小限制。 Planck键盘上.hex文件最大大小是 is 7000h (十进制是28672) + +``` +Linking: .build/planck_rev4_cbbrowne.elf [OK] +Creating load file for Flash: .build/planck_rev4_cbbrowne.hex [OK] + +Size after: + text data bss dec hex filename + 0 22396 0 22396 577c planck_rev4_cbbrowne.hex +``` + + - 上面那个文件大小是 22396/577ch，比28672/7000h小 + - 当你有一个合适的.hex文件时，你就要重试加载那个了 + - 您在键盘Makefile中的某些选项可能消耗额外内存；注意以下这几个 + BOOTMAGIC_ENABLE, MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE, API_SYSEX_ENABLE +- DFU 工具/不/可以写入bootloader (unless you throw in extra fruit salad of options), + 所以还是有点危险的 +- EEPROM大概有100000次循环寿命。不要总是频繁重写固件；EEPROM会玩坏的。 +## 全键无冲不好用 +首先你要在**Makefile**用如下命令编译固件`NKRO_ENABLE`。 + +全键无冲还不好用的话试着用`Magic` **N** 命令(默认是`LShift+RShift+N`)。这个命令会在**全键无冲**和**六键无冲**之间临时切换。有些情况**全键无冲**不好用你就需要使用**六键无冲**模式，尤其是在BIOS中。 + +如果你的固件使用`BOOTMAGIC_ENABLE`编译的你要用`BootMagic` **N** 命令(默认`Space+N`)打开开关。这个设置保存在EEPROM中并保存在电源循环中。 + + +https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch + + +## 指点杆需要复位电路(PS/2 鼠标支持) +如果没有复位电路，由于硬件初始化不正确，您将得到不一致的结果。查看TPM754复位电路。 + +- http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447 +- http://www.mikrocontroller.net/attachment/52583/tpm754.pdf + + +## 矩阵不可读16以上的列 +当列超过16时[matrix.h]的`read_cols()`中，用`1UL<<16`而不要用`1<<16`。 + +在C语言中`1` 是一个[int] 类型的[16 bit]值，在AVR中你不能左移大于15次。如果你使用`1<<16`的话会得到意外的零。你要用 [unsigned long]类型，比如`1UL`。 + +http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 + + +## Bootloader跳转不好用 +在**Makefile**中正确配置**Makefile**大小。如果分区大小不正确，引导加载程序可能无法从**Magic command**和**Boot Magic**加载。 +``` +# bootloader字节数： +# Atmel DFU loader(ATmega32U4) 4096 +# Atmel DFU loader(AT90USB128) 8192 +# LUFA bootloader(ATmega32U4) 4096 +# Arduino Caterina(ATmega32U4) 4096 +# USBaspLoader(ATmega***) 2048 +# Teensy halfKay(ATmega32U4) 512 +# Teensy++ halfKay(AT90USB128) 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 +``` +AVR引导大小是通过**BOOTSZ**熔丝位来设置的。查阅你单片机的datasheet。 +记住，datasheet用的是**Word**(2字节)表示大小和地址，TMK用的是**Byte**。 + +AVR引导部分位于闪存的末尾，如下所示（Application是应用区，Bootloader是引导区）。 +``` +byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB1286) +0x0000 +---------------+ 0x00000 +---------------+ + | | | | + | | | | + | Application | | Application | + | | | | + = = = = + | | 32KB-4KB | | 128KB-8KB +0x6000 +---------------+ 0x1E000 +---------------+ + | Bootloader | 4KB | Bootloader | 8KB +0x7FFF +---------------+ 0x1FFFF +---------------+ + + +byte Teensy(ATMega32u4) byte Teensy++(AT90SUB1286) +0x0000 +---------------+ 0x00000 +---------------+ + | | | | + | | | | + | Application | | Application | + | | | | + = = = = + | | 32KB-512B | | 128KB-2KB +0x7E00 +---------------+ 0x1FC00 +---------------+ + | Bootloader | 512B | Bootloader | 2KB +0x7FFF +---------------+ 0x1FFFF +---------------+ +``` + +详情请见下方issue。 +https://github.com/tmk/tmk_keyboard/issues/179 + +如果你使用TeensyUSB, 有一个[已知bug](https://github.com/qmk/qmk_firmware/issues/164)硬件重置按钮阻止软件定义重置键工作。重新插拔键盘就好了。 + +## 特殊额外键不起作用(系统，音频控制键) +你要在`rules.mk`定义`EXTRAKEY_ENABLE`在QMK中使用它们。 + +``` +EXTRAKEY_ENABLE = yes # 音频控制和系统控制 +``` + +## 睡眠唤醒不好用 + +在Windows查看设备管理器中该键盘设备属性中电源管理选项卡中的`允许此设备唤醒计算机(O)`是否勾选。同时看一眼BIOS设置。 + +在主机睡眠时按下任何键都可以唤醒了。 + +## 使用Arduino? + +**注意Arduino的针脚名字和主控芯片的不一样。** 比如, Arduino的`D0`并不是`PD0`。自己用原理图捋一下电路。 + +- http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf +- http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf + +Arduino Leonardo和micro使用**ATMega32U4**，该芯片TMK可用，但Arduino的bootloader会导致问题。 + + +## 在USB AVR使用PF4-7针脚? +你要置位MCUCR寄存器JTD位来将PF4-7设置为GPIO。这些针脚默认是JTAG功能。 像ATMega*U* or AT90USB*这样的MCU会受影响。 + +如果是用Teensy的话就不需要了。Tennsy自带JTAGEN位未编程来失能该功能。 + +代码如下。 +``` + // F接口JTAG失能。在四个周期内写入两次JTD位。 + MCUCR |= (1< +![键盘设计图](https://i.imgur.com/5wsh5wM.png) + +## 我有一些键变成了其他功能或者不工作了 + +QMK有两个功能，Bootmagic和命令行，它允许您在运行中更改键盘的行为。该功能包括但不仅限于, 交换Ctrl/Caps，关闭界面，交换Alt/Gui，交换 Backspace/Backslash，禁用所有键，以及其他的行为改变。 + +快速解决方法是插入键盘时按住`Space`+`Backspace`。该操作将重置已保存设置，让这些键回复初始功能。这招不好用的话参阅下方： + +* [Bootmagic](feature_bootmagic.md) +* [命令](feature_command.md) + +## 菜单键不好用 + +现在大多数键盘 `KC_RGUI`和`KC_RCTL`中间的键子叫做`KC_APP`。这是因为在这个键子发明之前相关标准里就已经有键叫做`MENU(菜单)`了，所以微软叫他`APP(应用)`键。 + +## `KC_SYSREQ` 不工作 +使用抓屏的键码(`KC_PSCREEN`或`KC_PSCR`)而不用`KC_SYSREQ`。组合键'Alt + Print Screen'会被当作'System request'。 + +见[issue #168](https://github.com/tmk/tmk_keyboard/issues/168)和 +* http://en.wikipedia.org/wiki/Magic_SysRq_key +* http://en.wikipedia.org/wiki/System_request + +## 电源键不工作 + +这有点让人困惑,QMK有两个"Power(电源)"键码: `KC_POWER` 在键盘/小键盘的HID使用页面中，`KC_SYSTEM_POWER` (或者叫`KC_PWR`)在用户页。 + +前者只能被macOS识别，但是后者，即`KC_SLEP`和`KC_WAKE`三大主要操作系统全都支持，所以推荐使用这两个。Windows下这些键立即生效，macOS要长按直到弹出对话框。 + +## 自动大小写锁定 +可以解决'the'问题(正常应为The)。我经常在输入'The'时不慎输入了'the'或者'THe'。自动大小写锁定可以修正此类问题。详见下方链接。 +https://github.com/tmk/tmk_keyboard/issues/67 + +## 修改 键/层 卡住 +除非正确配置层切换，否则修改键或层可能会卡住。 +对于修改键和图层操作，必须把`KC_TRANS`放到目标层的相同位置，用于注销修改键或在释放事件时返回到上一层。 +* https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#31-momentary-switching +* http://geekhack.org/index.php?topic=57008.msg1492604#msg1492604 +* https://github.com/tmk/tmk_keyboard/issues/248 + + +## 机械自锁开关支持Mechanical Lock Switch Support + +本功能用于*机械自锁开关*比如[this Alps one](http://deskthority.net/wiki/Alps_SKCL_Lock)。你可以通过向`config.h`添加以下宏来使能该功能： + +``` +#define LOCKING_SUPPORT_ENABLE +#define LOCKING_RESYNC_ENABLE +``` + +在使能该功能后，要在键盘中使用`KC_LCAP`, `KC_LNUM` 和 `KC_LSCR`这三个键码。 + +远古机械键盘偶尔会有自锁机械开关，现在几乎没有了。***大多数情况下你不需要使用该功能，且要使用`KC_CAPS`, `KC_NLCK`和`KC_SLCK`这三个键码。*** + +## 输入ASCII之外的特殊字符比如Cédille 'Ç' +没有在所有系统中输入这个的通用方法。你要定义针对你的特定操作系统或布局的**宏**。 + +比如看这个**宏**代码的文章。 + +http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620 + +在**Windows**上，可以用`AltGr`键或**Alt码**。 +* http://en.wikipedia.org/wiki/AltGr_key +* https://zh.wikipedia.org/wiki/Alt%E7%A0%81 + +在**Mac OS**定义`Option`键组合。 +* https://zh.wikipedia.org/wiki/Option%E9%94%AE#%E6%9B%BF%E4%BB%A3%E9%94%AE%E7%9B%98%E8%BE%93%E5%85%A5 + +在**Xorg**可以改用`compose`键。 +* http://en.wikipedia.org/wiki/Compose_key + +下方链接查看**Unicode**输入。 +* http://en.wikipedia.org/wiki/Unicode_input + +## macOS上的`Fn` + +不像大多数FN键，苹果上那个有自己的键码...呃，基本上算吧。 他取缔了基本6键无冲HID报告的第六个键码 -- 所以苹果键盘其实是5键无冲的。 + +技术上说QMK可以发送这个键。但是，这样做需要修改报告格式以添加FN键的状态。这还不是最糟糕的，你的键盘的VID和PID和真的苹果键盘不一样的话还不会被识别。 +QMK官方支持这个会被律师函的，所以就当我没说过。 + +详见[issue#2179](https://github.com/qmk/qmk_firmware/issues/2179)。 + + +## Mac OSX的媒体控制键 +#### KC_MNXT 和 KC_MPRV 在Mac上不好用 +使用 `KC_MFFD`(`KC_MEDIA_FAST_FORWARD`) 和 `KC_MRWD`(`KC_MEDIA_REWIND`)，不要用 `KC_MNXT` 和 `KC_MPRV`. +详见 https://github.com/tmk/tmk_keyboard/issues/195 + + +## Mac OSX中支持那些键? +你可以从此源码中获知在OSX中支持哪些键码 + +`usb_2_adb_keymap` 阵列映射 键盘/小键盘 页用于ADB扫描码(OSX内部键码). + +https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/Cosmo_USB2ADB.c + +`IOHIDConsumer::dispatchConsumerEvent`会处理用户页面用法。 + +https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/IOHIDConsumer.cpp + + +## Mac OSX中的JIS键 +岛国特别键比如`無変換(Muhenkan)`, `変換(Henkan)`, `ひらがな(hiragana)`OSX是不是别的。You can use **Seil** to enable those keys, try following options. + +* 在电脑键盘上使能NFER键 +* 在电脑键盘上使能XFER键 +* 在电脑键盘上使能KATAKAN键 + +https://pqrs.org/osx/karabiner/seil.html + + +## RN-42蓝牙模块与Karabiner不能有效协同工作 +Karabiner - Mac OSX的改键软件 - 默认RN-42模块是不会被响应的。想要Karabiner和你的键盘协同工作你要使能此选项： +https://github.com/tekezo/Karabiner/issues/403#issuecomment-102559237 + +此问题详见下方链接。 +https://github.com/tmk/tmk_keyboard/issues/213 +https://github.com/tekezo/Karabiner/issues/403 + + +## Esc 和 ` 双功能键 + +请见[Grave Escape](feature_grave_esc.md)功能。 + +## 右侧双角色修改键(诸如Shift、Alt等有修改其他键作用的键)变箭头键 +右侧修改键单击时会变为箭头键，长按就还是修改键。在TMK中双角色键称之为**TAP**. +``` + +#include "keymap_common.h" + + +/* 用TMK双角色键功能实现右侧修改键改箭头键 + * + * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role + * https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys + */ +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + [0] = LAYOUT( \ + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \ + FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3), + [1] = LAYOUT( \ + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP), + [1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN), + [2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT), + [3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT), + [4] = ACTION_LAYER_MOMENTARY(1), + [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP), + [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN), + [7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME), + [8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END), +}; + +``` + +双角色键说明: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys + + +## Mac OSX的弹出键 +`KC_EJCT` 键码在OSX可以使用 https://github.com/tmk/tmk_keyboard/issues/250 +似乎Windows10会忽略该键码，Linux/Xorg可以识别该键码但默认不映射。 + +目前尚不清楚如何在真正的苹果键盘按出弹出键。HHKB使用`F20`用于弹出键(`Fn+f`)，该功能在MAC模式有效但不保证与苹果弹出键码相符。 + + +## `action_util.c`中的 `weak_mods`和`real_mods`是什么 +___待改善___ + +real_mods 用于保存实际(物理)修改键的实际状态。 +weak_mods 用于保存虚拟或临时修改键，它将不会影响实际修改键。 + +以按下左侧Shift键然后输入ACTION_MODS_KEY(LSHIFT, KC_A)为例， + +在weak_mods时， +* (1) 按下不抬起左Shift: real_mods |= MOD_BIT(LSHIFT) +* (2) 按 ACTION_MODS_KEY(LSHIFT, KC_A): weak_mods |= MOD_BIT(LSHIFT) +* (3) 抬起 ACTION_MODS_KEY(LSHIFT, KC_A): weak_mods &= ~MOD_BIT(LSHIFT) +real_mods 还是保持在修改状态。 + +在没有weak_mods时， +* (1) 按下不抬起左Shift: real_mods |= MOD_BIT(LSHIFT) +* (2) 按 ACTION_MODS_KEY(LSHIFT, KC_A): real_mods |= MOD_BIT(LSHIFT) +* (3) 抬起 ACTION_MODS_KEY(LSHIFT, KC_A): real_mods &= ~MOD_BIT(LSHIFT) +此时real_mods失去‘实际左Shift’的状态。 + +weak_mods和real_mods现已全部加入键盘数据包发送豪华套餐。 +https://github.com/tmk/tmk_core/blob/master/common/action_util.c#L57 -- cgit v1.2.3-70-g09d2 From dcb274b2867adeb0f516eb709c7f651aa61774a6 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 22 May 2019 20:55:52 -0700 Subject: Fix links Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- docs/_summary.md | 4 ++-- docs/features.md | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'docs') diff --git a/docs/_summary.md b/docs/_summary.md index 1c3153b04..02254a9d8 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -54,12 +54,12 @@ * [Bootmagic](feature_bootmagic.md) * [Combos](feature_combo) * [Command](feature_command.md) - * [Debounce API](feature_debuonce.md) + * [Debounce API](feature_debounce_type.md) * [Dynamic Macros](feature_dynamic_macros.md) * [Encoders](feature_encoders.md) * [Grave Escape](feature_grave_esc.md) * [Haptic Feedback](feature_haptic_feedback.md) - * [HD44780 LED](feature_hd44780.md) + * [HD44780 LCD Controller](feature_hd44780.md) * [Key Lock](feature_key_lock.md) * [Layouts](feature_layouts.md) * [Leader Key](feature_leader_key.md) diff --git a/docs/features.md b/docs/features.md index eb3f26d6a..ac9aad394 100644 --- a/docs/features.md +++ b/docs/features.md @@ -11,7 +11,7 @@ QMK has a staggering number of features for building your keyboard. It can take * [Bootmagic](feature_bootmagic.md) - Adjust the behavior of your keyboard using hotkeys. * [Combos](feature_combo.md) - Custom actions for multiple key holds. * [Command](feature_command.md) - Runtime version of bootmagic (Formerly known as "Magic"). -* [Debounce API](feature_debuonce.md) - Customization of debouncing algorithms, and the ability to add more/custom debouncing. +* [Debounce API](feature_debounce_type.md) - Customization of debouncing algorithms, and the ability to add more/custom debouncing. * [Dynamic Macros](feature_dynamic_macros.md) - Record and playback macros from the keyboard itself. * [Encoders](feature_encoders.md) - Rotary encoders! * [Grave Escape](feature_grave_esc.md) - Lets you use a single key for Esc and Grave. @@ -23,7 +23,7 @@ QMK has a staggering number of features for building your keyboard. It can take * [LED Matrix](feature_led_matrix.md) - LED Matrix single color lights for per key lighting (Single Color, not RGB). * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key. * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard. -* [OLED Driver](feature_oled_driver) - Add OLED screens to your keyboard. +* [OLED Driver](feature_oled_driver.md) - Add OLED screens to your keyboard. * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it. * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard. * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard. @@ -37,4 +37,4 @@ QMK has a staggering number of features for building your keyboard. It can take * [Thermal Printer](feature_thermal_printer.md) - Connect a thermal printer to your keyboard to be able to toggle on a printed log of everything you type. * [Unicode](feature_unicode.md) - Unicode input support. * [Userspace](feature_userspace.md) - Share code between different keymaps and keyboards. -* [Velocikey](feature_velocikey.md) - Allows changes in animation speed based on WPM/Typing speed. +* [Velocikey](feature_velocikey.md) - Allows changes in RGB animation speed based on WPM/Typing speed. -- cgit v1.2.3-70-g09d2 From c97315dc5a355636e1f514a93c28ea2842002742 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 22 May 2019 20:59:01 -0700 Subject: Additional link fixes Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- docs/_summary.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'docs') diff --git a/docs/_summary.md b/docs/_summary.md index 02254a9d8..8a40ccd7f 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -52,7 +52,7 @@ * [Backlight](feature_backlight.md) * [Bluetooth](feature_bluetooth.md) * [Bootmagic](feature_bootmagic.md) - * [Combos](feature_combo) + * [Combos](feature_combo.md) * [Command](feature_command.md) * [Debounce API](feature_debounce_type.md) * [Dynamic Macros](feature_dynamic_macros.md) @@ -66,7 +66,7 @@ * [LED Matrix](feature_led_matrix.md) * [Macros](feature_macros.md) * [Mouse Keys](feature_mouse_keys.md) - * [OLED Driver](feature_oled_driver) + * [OLED Driver](feature_oled_driver.md) * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) * [Pointing Device](feature_pointing_device.md) * [PS/2 Mouse](feature_ps2_mouse.md) -- cgit v1.2.3-70-g09d2 From 36f427f40cc64fa2dcd6da4eae20d467e88c0bd9 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 23 May 2019 10:29:18 -0700 Subject: Fix typo --- docs/features.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/features.md b/docs/features.md index ac9aad394..f9ef51eae 100644 --- a/docs/features.md +++ b/docs/features.md @@ -24,7 +24,7 @@ QMK has a staggering number of features for building your keyboard. It can take * [Macros](feature_macros.md) - Send multiple key presses when pressing only one physical key. * [Mouse keys](feature_mouse_keys.md) - Control your mouse pointer from your keyboard. * [OLED Driver](feature_oled_driver.md) - Add OLED screens to your keyboard. -* [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets hit a key rather than holding it. +* [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys) - Sticky Keys, lets you hit a key rather than holding it. * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard. * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a PS/2 mouse directly to your keyboard. * [RGB Light](feature_rgblight.md) - RGB lighting for your keyboard. -- cgit v1.2.3-70-g09d2 From fe8c2209ca9172352cb46cc6cf7800e4998849ea Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 25 May 2019 03:05:29 +1000 Subject: Document MT keycode in keycodes.md --- docs/keycodes.md | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) (limited to 'docs') diff --git a/docs/keycodes.md b/docs/keycodes.md index e9cfd3425..3ff87856e 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -344,23 +344,24 @@ This is a reference only. Each group of keys links to the page documenting their ## [Mod-Tap Keys](feature_advanced_keycodes.md#mod-tap) -|Key |Aliases |Description | -|------------|-----------------------------------------------------------------|-------------------------------------------------------| -|`LCTL_T(kc)`|`CTL_T(kc)` |Left Control when held, `kc` when tapped | -|`LSFT_T(kc)`|`SFT_T(kc)` |Left Shift when held, `kc` when tapped | -|`LALT_T(kc)`|`ALT_T(kc)` |Left Alt when held, `kc` when tapped | -|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped | -|`RCTL_T(kc)`| |Right Control when held, `kc` when tapped | -|`RSFT_T(kc)`| |Right Shift when held, `kc` when tapped | -|`RALT_T(kc)`|`ALGR_T(kc)` |Right Alt when held, `kc` when tapped | -|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)` |Right GUI when held, `kc` when tapped | -|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)` |Left Shift and GUI when held, `kc` when tapped | -|`LCA_T(kc)` | |Left Control and Alt when held, `kc` when tapped | -|`LCAG_T(kc)`| |Left Control, Alt and GUI when held, `kc` when tapped | -|`RCAG_T(kc)`| |Right Control, Alt and GUI when held, `kc` when tapped | -|`C_S_T(kc)` | |Left Control and Shift when held, `kc` when tapped | -|`MEH_T(kc)` | |Left Control, Shift and Alt when held, `kc` when tapped| -|`HYPR_T(kc)`|`ALL_T(kc)` |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)| +|Key |Aliases |Description | +|-------------|-----------------------------------------------------------------|-------------------------------------------------------| +|`MT(mod, kc)`| |`mod` when held, `kc` when tapped | +|`LCTL_T(kc)` |`CTL_T(kc)` |Left Control when held, `kc` when tapped | +|`LSFT_T(kc)` |`SFT_T(kc)` |Left Shift when held, `kc` when tapped | +|`LALT_T(kc)` |`ALT_T(kc)` |Left Alt when held, `kc` when tapped | +|`LGUI_T(kc)` |`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped | +|`RCTL_T(kc)` | |Right Control when held, `kc` when tapped | +|`RSFT_T(kc)` | |Right Shift when held, `kc` when tapped | +|`RALT_T(kc)` |`ALGR_T(kc)` |Right Alt when held, `kc` when tapped | +|`RGUI_T(kc)` |`RCMD_T(kc)`, `RWIN_T(kc)` |Right GUI when held, `kc` when tapped | +|`SGUI_T(kc)` |`SCMD_T(kc)`, `SWIN_T(kc)` |Left Shift and GUI when held, `kc` when tapped | +|`LCA_T(kc)` | |Left Control and Alt when held, `kc` when tapped | +|`LCAG_T(kc)` | |Left Control, Alt and GUI when held, `kc` when tapped | +|`RCAG_T(kc)` | |Right Control, Alt and GUI when held, `kc` when tapped | +|`C_S_T(kc)` | |Left Control and Shift when held, `kc` when tapped | +|`MEH_T(kc)` | |Left Control, Shift and Alt when held, `kc` when tapped| +|`HYPR_T(kc)` |`ALL_T(kc)` |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)| ## [RGB Lighting](feature_rgblight.md) -- cgit v1.2.3-70-g09d2 From 3ef425423a9b8399b02c8240b4f56c3713f984f6 Mon Sep 17 00:00:00 2001 From: Elliot Powell <32494740+e11i0t23@users.noreply.github.com> Date: Thu, 30 May 2019 16:53:43 +0100 Subject: Update feature_encoders.md Fix missing closing comment after second encoder --- docs/feature_encoders.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_encoders.md b/docs/feature_encoders.md index dd12c91ce..9ac97a9a1 100644 --- a/docs/feature_encoders.md +++ b/docs/feature_encoders.md @@ -38,7 +38,7 @@ or `keymap.c`: } else { tap_code(KC_PGUP); } - } else if (index == 1) { /* Second encoder + } else if (index == 1) { /* Second encoder */ if (clockwise) { tap_code(KC_UP); } else { -- cgit v1.2.3-70-g09d2 From 9cc5841a91ff1bf95d6895254b43b097a0f365aa Mon Sep 17 00:00:00 2001 From: Elliot Powell <32494740+e11i0t23@users.noreply.github.com> Date: Fri, 31 May 2019 19:04:39 +0100 Subject: Update reference_configurator_support.md We no longer auto generate bootloader into info.json through the website therefore this can be removed --- docs/reference_configurator_support.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/reference_configurator_support.md b/docs/reference_configurator_support.md index a20a6c9ad..784c6d9f7 100644 --- a/docs/reference_configurator_support.md +++ b/docs/reference_configurator_support.md @@ -89,7 +89,7 @@ Once the layout is as desired, move to the Raw Data tab in KLE, and copy the con To convert this data into our JSON, go to the [QMK KLE-JSON Converter](https://qmk.fm/converter/), paste the Raw Data into the Input field, and click the Convert button. After a moment, our JSON data will appear in the Output field. Copy the contents to a new text document, and name the document `info.json`, saving it in the same folder that contains `numpad.h`. -Use the `keyboard_name` object to set the name of the keyboard. The `bootloader` object is deprecated, so it can be deleted. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality. +Use the `keyboard_name` object to set the name of the keyboard. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality. ```json { -- cgit v1.2.3-70-g09d2 From d3317a8a66e1a94de0dd795f5c9efe260e674475 Mon Sep 17 00:00:00 2001 From: Elliot Powell <32494740+e11i0t23@users.noreply.github.com> Date: Fri, 31 May 2019 22:44:27 +0100 Subject: [Docs] Update getting_started_introduction.md (#6037) * Update getting_started_introduction.md * Update docs/getting_started_introduction.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/getting_started_introduction.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/getting_started_introduction.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/getting_started_introduction.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- docs/getting_started_introduction.md | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/getting_started_introduction.md b/docs/getting_started_introduction.md index 3b6a488ed..e183d77ee 100644 --- a/docs/getting_started_introduction.md +++ b/docs/getting_started_introduction.md @@ -12,11 +12,17 @@ Within the folder `users` is a directory for each user. This is a place for user ### Keyboard Project Structure -Within the folder `keyboards` and its subfolder `handwired` is a directory for each keyboard project, for example `qmk_firmware/keyboards/clueboard`. Within it you'll find the following structure: +Within the folder `keyboards`, its subfolder `handwired` and its vendor and manufacture subdirectories e.g. `clueboard` is a directory for each keyboard project, for example `qmk_firmware/keyboards/clueboard/2x1800`. Within it, you'll find the following structure: * `keymaps/`: Different keymaps that can be built * `rules.mk`: The file that sets the default "make" options. Do not edit this file directly, instead use a keymap specific `rules.mk`. * `config.h`: The file that sets the default compile time options. Do not edit this file directly, instead use a keymap specific `config.h`. +* `info.json`: The file used for setting layout for QMK Configurator. See [Configurator Support](reference_configurator_support.md) for more information. +* `readme.md`: A brief overview of the keyboard. +* `.h`: This file is where the keyboard layout is defined against the keyboard's switch matrix. +* `.c`: This file is where you can find custom code for the keyboard. + +For more information on project structure, see [QMK Keyboard Guidelines](hardware_keyboard_guidelines.md). ### Keymap Structure -- cgit v1.2.3-70-g09d2 From 155be34a1d2b782a73318cc507315b33cc86cc49 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sun, 2 Jun 2019 09:04:09 +1000 Subject: Parameterise STM32 I2C pin modes and timing parameters. (#5671) I2C timing parameters were seemingly set up for an STM32F303 target MCU, at a specific clock speed. This commit allows specifying the timing parameters via config.h, allowing other STM32 MCUs to be targeted, potentially at different clock frequencies. Alternate function modes for the I2C pins are now also configurable, allowing for remapping to other pins. --- docs/i2c_driver.md | 29 ++++++++++++++++++++++++----- drivers/arm/i2c_master.c | 16 +++++++--------- drivers/arm/i2c_master.h | 40 ++++++++++++++++++++++++++++++++++++++-- 3 files changed, 69 insertions(+), 16 deletions(-) (limited to 'docs') diff --git a/docs/i2c_driver.md b/docs/i2c_driver.md index bb1a2d74f..4a47a92b1 100644 --- a/docs/i2c_driver.md +++ b/docs/i2c_driver.md @@ -65,11 +65,30 @@ By default the I2C1 hardware driver is assumed to be used. If another hardware d STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C. You can use these defines to set your i2c pins: -| Variable | Description | Default | -|-------------|----------------------------------------------|---------| -| `I2C1_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) | `GPIOB` | -| `I2C1_SCL` | The pin number for the SCL pin (0-9) | `6` | -| `I2C1_SDA` | The pin number for the SDA pin (0-9) | `7` | +| Variable | Description | Default | +|--------------------------|----------------------------------------------------------------------------------------------|---------| +| `I2C1_SCL_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SCL | `GPIOB` | +| `I2C1_SDA_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SDA | `GPIOB` | +| `I2C1_SCL` | The pin number for the SCL pin (0-9) | `6` | +| `I2C1_SDA` | The pin number for the SDA pin (0-9) | `7` | +| `I2C1_BANK` (deprecated) | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`), superceded by `I2C1_SCL_BANK`, `I2C1_SDA_BANK` | `GPIOB` | + +STM32 MCUs allow for different timing parameters when configuring I2C. These can be modified using the following parameters, using https://www.st.com/en/embedded-software/stsw-stm32126.html as a reference: + +| Variable | Default | +|-----------------------|---------| +| `I2C1_TIMINGR_PRESC` | `15U` | +| `I2C1_TIMINGR_SCLDEL` | `4U` | +| `I2C1_TIMINGR_SDADEL` | `2U` | +| `I2C1_TIMINGR_SCLH` | `15U` | +| `I2C1_TIMINGR_SCLL` | `21U` | + +STM32 MCUs allow for different "alternate function" modes when configuring GPIO pins. These are required to switch the pins used to I2C mode. See the respective datasheet for the appropriate values for your MCU. + +| Variable | Default | +|---------------------|---------| +| `I2C1_SCL_PAL_MODE` | `4` | +| `I2C1_SDA_PAL_MODE` | `4` | You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function: diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c index 7369398cc..5814375f3 100644 --- a/drivers/arm/i2c_master.c +++ b/drivers/arm/i2c_master.c @@ -32,12 +32,10 @@ static uint8_t i2c_address; -// This configures the I2C clock to 400khz assuming a 72Mhz clock -// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html static const I2CConfig i2cconfig = { - STM32_TIMINGR_PRESC(15U) | - STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) | - STM32_TIMINGR_SCLH(15U) | STM32_TIMINGR_SCLL(21U), + STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | + STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | + STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0 }; @@ -58,13 +56,13 @@ __attribute__ ((weak)) void i2c_init(void) { // Try releasing special pins for a short time - palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT); - palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT); + palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT); + palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT); chThdSleepMilliseconds(10); - palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); - palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); + palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); + palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); //i2cInit(); //This is invoked by halInit() so no need to redo it. } diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h index a15f1702d..1bb74c800 100644 --- a/drivers/arm/i2c_master.h +++ b/drivers/arm/i2c_master.h @@ -26,9 +26,19 @@ #include "ch.h" #include -#ifndef I2C1_BANK - #define I2C1_BANK GPIOB +#ifdef I2C1_BANK + #define I2C1_SCL_BANK I2C1_BANK + #define I2C1_SDA_BANK I2C1_BANK #endif + +#ifndef I2C1_SCL_BANK + #define I2C1_SCL_BANK GPIOB +#endif + +#ifndef I2C1_SDA_BANK + #define I2C1_SDA_BANK GPIOB +#endif + #ifndef I2C1_SCL #define I2C1_SCL 6 #endif @@ -36,6 +46,32 @@ #define I2C1_SDA 7 #endif +// The default PAL alternate modes are used to signal that the pins are used for I2C +#ifndef I2C1_SCL_PAL_MODE + #define I2C1_SCL_PAL_MODE 4 +#endif +#ifndef I2C1_SDA_PAL_MODE + #define I2C1_SDA_PAL_MODE 4 +#endif + +// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock +// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html +#ifndef I2C1_TIMINGR_PRESC + #define I2C1_TIMINGR_PRESC 15U +#endif +#ifndef I2C1_TIMINGR_SCLDEL + #define I2C1_TIMINGR_SCLDEL 4U +#endif +#ifndef I2C1_TIMINGR_SDADEL + #define I2C1_TIMINGR_SDADEL 2U +#endif +#ifndef I2C1_TIMINGR_SCLH + #define I2C1_TIMINGR_SCLH 15U +#endif +#ifndef I2C1_TIMINGR_SCLL + #define I2C1_TIMINGR_SCLL 21U +#endif + #ifndef I2C_DRIVER #define I2C_DRIVER I2CD1 #endif -- cgit v1.2.3-70-g09d2 From e0a0d80bd329b4a289e3c4f817c96857c25b0f16 Mon Sep 17 00:00:00 2001 From: ymzcdg <49898694+ymzcdg@users.noreply.github.com> Date: Wed, 5 Jun 2019 02:06:17 +0800 Subject: docs to Mandarin Chinese (#5960) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * faq_general.md to Chinese faq_general.md to Chinese faq finished * custom_quantum_functions.md to Chinese custom_quantum_functions.md to Chinese * custom_quantum_functions.md fix custom_quantum_functions.md fix * custom_quantum_functions.md fix translate custom_quantum_functions.md fix translate * !ver.English! _summary.md bug fix _summary.md bug fix of English doc. add".md" behind "feature_combo" * !ver.English! custom_quantum_functions.md fix#5869 custom_quantum_functions.md in English : delete redundant "is" . issue#5869 * !ver.English! how_keyboards_work.md link fix change https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input to https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_input "#Hexadecimal_code_input" not exist * !English! how_keyboards_work.md add missing "t" Tied to a specific OS a a time (need recompilation when changing OS); change to Tied to a specific OS at a time (need recompilation when changing OS); * _summary.md improve translation _summary.md improve translation * reference_glossary.md into Chinese reference_glossary.md into Chinese 术语表翻译，这个术语表英文版似乎不太全，应该补充英文版，并在中文版添加其他具有中国特色的术语。 --- docs/custom_quantum_functions.md | 2 +- docs/how_keyboards_work.md | 4 +- docs/zh-cn/_summary.md | 66 ++--- docs/zh-cn/custom_quantum_functions.md | 490 +++++++++++++++++++++++++++++++++ docs/zh-cn/faq_general.md | 19 ++ docs/zh-cn/reference_glossary.md | 170 ++++++++++++ 6 files changed, 715 insertions(+), 36 deletions(-) create mode 100644 docs/zh-cn/custom_quantum_functions.md create mode 100644 docs/zh-cn/faq_general.md create mode 100644 docs/zh-cn/reference_glossary.md (limited to 'docs') diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md index 6287b9530..7be82c650 100644 --- a/docs/custom_quantum_functions.md +++ b/docs/custom_quantum_functions.md @@ -267,7 +267,7 @@ You should use this function if you need custom matrix scanning code. It can als If the board supports it, it can be "idled", by stopping a number of functions. A good example of this is RGB lights or backlights. This can save on power consumption, or may be better behavior for your keyboard. -This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_init_*`, which are called when the system is board is idled and when it wakes up, respectively. +This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_init_*`, which are called when the system board is idled and when it wakes up, respectively. ### Example suspend_power_down_user() and suspend_wakeup_init_user() Implementation diff --git a/docs/how_keyboards_work.md b/docs/how_keyboards_work.md index 0772f055d..5697a2187 100644 --- a/docs/how_keyboards_work.md +++ b/docs/how_keyboards_work.md @@ -63,10 +63,10 @@ You may wonder why a keyboard layout containing all of Unicode is not devised th ## How to (Maybe) Enter Unicode Characters -You can have the firmware send *sequences of keys* to use the [software Unicode Input Method](https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_code_input) of the target operating system, thus effectively entering characters independently of the layout defined in the OS. +You can have the firmware send *sequences of keys* to use the [software Unicode Input Method](https://en.wikipedia.org/wiki/Unicode_input#Hexadecimal_input) of the target operating system, thus effectively entering characters independently of the layout defined in the OS. Yet, it does come with multiple disadvantages: - - Tied to a specific OS a a time (need recompilation when changing OS); + - Tied to a specific OS at a time (need recompilation when changing OS); - Within a given OS, does not work in all software; - Limited to a subset of Unicode on some systems. diff --git a/docs/zh-cn/_summary.md b/docs/zh-cn/_summary.md index df25a3ccd..b0d9f1c06 100644 --- a/docs/zh-cn/_summary.md +++ b/docs/zh-cn/_summary.md @@ -7,27 +7,27 @@ * [学习资源](newbs_learn_more_resources.md) * [QMK基础](README.md) - * [QMK 简介](getting_started_introduction.md) - * [贡献 QMK](contributing.md) + * [QMK简介](getting_started_introduction.md) + * [向QMK贡献](contributing.md) * [如何使用Github](getting_started_github.md) * [获得帮助](getting_started_getting_help.md) * [问题解答](faq.md) * [一般问题](faq_general.md) - * [构建/编译QMK](faq_build.md) - * [调试/故障排除 QMK](faq_debug.md) - * [键盘布局](faq_keymap.md) + * [构建/编译](faq_build.md) + * [调试/故障排除](faq_debug.md) + * [键盘映射](faq_keymap.md) * 详细指南 * [安装构建工具](getting_started_build_tools.md) - * [流浪者指南](getting_started_vagrant.md) + * [vagrant指南](getting_started_vagrant.md) * [构建/编译指令](getting_started_make_guide.md) * [刷新固件](flashing.md) * [定制功能](custom_quantum_functions.md) - * [布局概述](keymap.md) + * [映射概述](keymap.md) * [硬件](hardware.md) - * [AVR 处理器](hardware_avr.md) + * [AVR处理器](hardware_avr.md) * [驱动](hardware_drivers.md) * 参考 @@ -35,8 +35,8 @@ * [配置选项](config_options.md) * [键码](keycodes.md) * [记录最佳实践](documentation_best_practices.md) - * [文档指南](documentation_templates.md) - * [词汇表](reference_glossary.md) + * [文档模板](documentation_templates.md) + * [术语表](reference_glossary.md) * [单元测试](unit_testing.md) * [有用的功能](ref_functions.md) * [配置器支持](reference_configurator_support.md) @@ -44,35 +44,35 @@ * [特性](features.md) * [基本键码](keycodes_basic.md) - * [US ANSI 控制键](keycodes_us_ansi_shifted.md) + * [US ANSI控制码](keycodes_us_ansi_shifted.md) * [量子键码](quantum_keycodes.md) * [高级键码](feature_advanced_keycodes.md) * [音频](feature_audio.md) - * [自动控制](feature_auto_shift.md) + * [自动shift](feature_auto_shift.md) * [背光](feature_backlight.md) * [蓝牙](feature_bluetooth.md) - * [Bootmagic](feature_bootmagic.md) + * [热改键](feature_bootmagic.md) * [组合](feature_combo) * [命令](feature_command.md) * [动态宏指令](feature_dynamic_macros.md) * [编码器](feature_encoders.md) - * [Grave Escape](feature_grave_esc.md) - * [键锁](feature_key_lock.md) - * [层](feature_layouts.md) - * [引导键](feature_leader_key.md) - * [LED 阵列](feature_led_matrix.md) + * [重音号Esc复合键](feature_grave_esc.md) + * [自锁键](feature_key_lock.md) + * [布局](feature_layouts.md) + * [前导键](feature_leader_key.md) + * [LED阵列](feature_led_matrix.md) * [宏指令](feature_macros.md) * [鼠标键](feature_mouse_keys.md) * [一键功能](feature_advanced_keycodes.md#one-shot-keys) * [指针设备](feature_pointing_device.md) - * [PS/2 鼠标](feature_ps2_mouse.md) - * [RGB 光](feature_rgblight.md) - * [RGB 矩阵](feature_rgb_matrix.md) + * [PS/2鼠标](feature_ps2_mouse.md) + * [RGB灯光](feature_rgblight.md) + * [RGB矩阵](feature_rgb_matrix.md) * [空格候补换挡](feature_space_cadet_shift.md) * [空格候补换挡回车](feature_space_cadet_shift_enter.md) * [速录机](feature_stenography.md) * [换手](feature_swap_hands.md) - * [踢踏舞](feature_tap_dance.md) + * [多击键](feature_tap_dance.md) * [终端](feature_terminal.md) * [热敏打印机](feature_thermal_printer.md) * [Unicode](feature_unicode.md) @@ -80,16 +80,16 @@ * [速度键](feature_velocikey.md) * 针对制造者和定制者 - * [飞线指南](hand_wire.md) - * [ISP 刷新指南](isp_flashing_guide.md) - * [ARM 调试指南](arm_debugging.md) - * [I2C 驱动](i2c_driver.md) - * [GPIO 控制器](internals_gpio_control.md) - * [Proton C 转换](proton_c_conversion.md) + * [手工连线指南](hand_wire.md) + * [ISP刷新指南](isp_flashing_guide.md) + * [ARM调试指南](arm_debugging.md) + * [I2C驱动](i2c_driver.md) + * [GPIO控制器](internals_gpio_control.md) + * [Proton C转换](proton_c_conversion.md) * 深入了解 * [键盘如何工作](how_keyboards_work.md) - * [理解 QMK](understanding_qmk.md) + * [理解QMK](understanding_qmk.md) * 其他话题 * [使用Eclipse开发QMK](other_eclipse.md) @@ -99,8 +99,8 @@ * QMK 内构 (正在编写) * [定义](internals_defines.md) * [输入回调寄存器](internals_input_callback_reg.md) - * [Midi 设备](internals_midi_device.md) - * [Midi 设备设置过程](internals_midi_device_setup_process.md) - * [Midi 工具库](internals_midi_util.md) + * [Midi设备](internals_midi_device.md) + * [Midi设备设置过程](internals_midi_device_setup_process.md) + * [Midi工具库](internals_midi_util.md) * [发送函数](internals_send_functions.md) - * [Sysex 工具](internals_sysex_tools.md) + * [Sysex工具](internals_sysex_tools.md) diff --git a/docs/zh-cn/custom_quantum_functions.md b/docs/zh-cn/custom_quantum_functions.md new file mode 100644 index 000000000..42ceba9ca --- /dev/null +++ b/docs/zh-cn/custom_quantum_functions.md @@ -0,0 +1,490 @@ +# ζ̵Ĺ + +ںܶ˵ƻ̿ɲֻĵԷ㰴Ǹô򵥡϶ʵֱȼ򵥰ͺӵĹܡQMKעĹ, ǹ, ⣬ԶڲͬµΪ + +ҳٶκQMK֪ʶĶ[QMK](understanding_qmk.md)ڸIJⷢʲô + +## A Word on Core vs vs + +ǰqmk֯һνṹ + +* Core (`_quantum`) + * Keyboard/Revision (`_kb`) + * Keymap (`_user`) + +ÿһڶϼһ`_kb()` `_user()` ׺ ڼ/޶ʹ`_kb()`׺ڲֲʹ`_user()`׺ + +ڼ/޶㶨庯ʱ`_kb()`ִκδǰȵ`_user()`DZҪģȻֲ㺯ͲҪá + +# Զ + +ĿǰΪֹǸмΪ򴴽µļ롣ӴǶЩơ + +## һ¼ + +һöٳȫҲǸֲΨһֵQMKûֱֵСṩһ`SAFE_RANGE`ꡣöʱ`SAFE_RANGE`֤ȡΨһļֵ + + +öӡӵ`keymap.c`Ļڲ`FOO``BAR`ˡ + +```c +enum my_keycodes { + FOO = SAFE_RANGE, + BAR +}; +``` + +## ΪΪ + +㸲һѴڰΪʱΪ¼ʱҪ`process_record_kb()``process_record_user()`ڼʵ¼ǰQMKá`true`QMKķʽ롣ԺܷչĹܶ滻`false` QMKȻͼ̧ǰ¼ˡ + +ij»ͷʱᱻá + +### process_record_user()`ʾʵ + +¡Զһ`FOO`ļΪڰ»سʱ + +```c +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case FOO: + if (record->event.pressed) { + // ʱЩʲô + } else { + // ͷʱЩʲô + } + return false; // ˼нһ + case KC_ENTER: + // »سʱ + if (record->event.pressed) { + PLAY_NOTE_ARRAY(tone_qwerty); + } + return true; // QMKس/ͷ¼ + default: + return true; // + } +} +``` + +### `process_record_*` ĵ + +* /޶: `bool process_record_kb(uint16_t keycode, keyrecord_t *record)` +* : `bool process_record_user(uint16_t keycode, keyrecord_t *record)` + +`keycode()`ڲ϶ģ`MO(1)`, `KC_L`, ȵȡ Ҫ `switch...case` Щ¼ + +`record`ʵʰϢ + +```c +keyrecord_t record { + keyevent_t event { + keypos_t key { + uint8_t col + uint8_t row + } + bool pressed + uint16_t time + } +} +``` + +# LED + +qmkṩ˶ȡHID淶5LEDķ: + +* `USB_LED_NUM_LOCK` +* `USB_LED_CAPS_LOCK` +* `USB_LED_SCROLL_LOCK` +* `USB_LED_COMPOSE` +* `USB_LED_KANA` + +ӦLED״̬λλ +ַԻLED״̬ + +* ִͨ `led_set_user()` +* ͨ `host_keyboard_leds()` + +## `led_set_user()` + +5LEDκһ״̬Ҫıʱ˺á˺ͨLED +ʹ`IS_LED_ON(usb_led, led_name)``IS_LED_OFF(usb_led, led_name)`LED״̬ + +!> `host_keyboard_leds()`ܻ`led_set_user()`ǰֵ + +### `led_set_user()`ʾʵ + +```c +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + writePinLow(B0); + } else { + writePinHigh(B0); + } + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(B1); + } else { + writePinHigh(B1); + } + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + writePinLow(B2); + } else { + writePinHigh(B2); + } + if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) { + writePinLow(B3); + } else { + writePinHigh(B3); + } + if (IS_LED_ON(usb_led, USB_LED_KANA)) { + writePinLow(B4); + } else { + writePinHigh(B4); + } +} +``` + +### `led_set_*`ĵ + +* /޶: `void led_set_kb(uint8_t usb_led)` +* : `void led_set_user(uint8_t usb_led)` + +## `host_keyboard_leds()` + +᷵յLED״̬`led_set_*`֮ȡLED״̬ʱã[`matrix_scan_user()`](#ɨ). +Ϊ˱ݣ`IS_HOST_LED_ON(led_name)``IS_HOST_LED_OFF(led_name)` ֱ꣬ӵúͼ`host_keyboard_leds()` + +## LED״̬ + +һЩʵΪLED״̬ṩ˷ķ + +### Ergodox Boards + +Ergodoxʵṩ`ergodox_right_led_1`/`2`/`3_on`/`off()`ÿLED, Ҳ `ergodox_right_led_on`/`off(uint8_t led)` 򿪻رǡ + +⣬ʹ`ergodox_led_all_set(uint8_t n)`ָLEDȼÿLED`ergodox_right_led_1`/`2`/`3_set(uint8_t n)`ʹĻ`ergodox_right_led_set(uint8_t led, uint8_t n)` + +Ergodox boards ͬʱȼ`LED_BRIGHTNESS_LO`ȼ`LED_BRIGHTNESS_HI`(Ĭ). + +# ̳ʼ + +̳ʼм衣ǸȡҪʲô + +Ҫʼ˳г + +* `keyboard_pre_init_*` - ڴǰСЩҪǰеӲʼ +* `matrix_init_*` - ڹ̼м䱻áʱӲѳʼδʼ +* `keyboard_post_init_*` - ڹ̼󱻵á£ġƻ붼Է + +!> ڴ˵`keyboard_post_init_user`Ҫõĺ, ʱRGBƷ⡣ + +## Ԥʼ + +뼫УUSBʼǰС + +֮󲻾þͱʼˡ + +ڴû˵,òΪҪӲijʼ + +ӲʼĻٺò(ʼLEDһ). + +### `keyboard_pre_init_user()`ʾʵ + +ڼ̼趨 B0, B1, B2, B3, B4 LEDš + +```c +void keyboard_pre_init_user(void) { + // üԤʼ + + // LEDΪģʽ + setPinOutput(B0); + setPinOutput(B1); + setPinOutput(B2); + setPinOutput(B3); + setPinOutput(B4); +} +``` + +### `keyboard_pre_init_*` ĵ + +* /޶: `void keyboard_pre_init_kb(void)` +* : `void keyboard_pre_init_user(void)` + +## ʼ + +⽫ھʼʱãijЩӲúú󣬵һЩܱʼǰ + +طõĶʱãӲ޹أҲλá + + +### `matrix_init_*`ĵ + +* /޶: `void matrix_init_kb(void)` +* : `void matrix_init_user(void)` + + +## ̺ʼ + +Ǽ̳ʼеһijЩԣãΪʱӦöǽгʼ + + +### `keyboard_post_init_user()`ʾʵ + +ʾгʼɺУRGBơ + +```c +void keyboard_post_init_user(void) { + // úʼ + rgblight_enable_noeeprom(); // ʹRgb + rgblight_sethsv_noeeprom(180, 255, 255); // ɫõɫ(ɫ) + rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3); // ÿٺģʽ +} +``` + +### `keyboard_post_init_*` ĵ + +* /޶: `void keyboard_post_init_kb(void)` +* : `void keyboard_post_init_user(void)` + +# ɨ + +ܵĻҪ`process_record_*()`Զַ̣ʽӵ¼Уȷ벻Լ̲Ӱ졣Ȼڼ£бҪоɨ衣ЩҪرעܣΪÿٱ10Ρ + +### `matrix_scan_*`ʾʵ + +ӱʡˡhookһܼе֮ǰӦ㹻˽qmkڲṹԱûʾ±дҪ[һissue](https://github.com/qmk/qmk_firmware/issues/new)[Discordǽ](https://discord.gg/Uq7gcHh). + +### `matrix_scan_*` ĵ + +* /޶: `void matrix_scan_kb(void)` +* : `void matrix_scan_user(void)` + +úÿξɨʱãMCUͬдҪΪкܶΡ + +ԶɨʱõҲԶ״̬(LEDƻĻ)ûҲ붨еĹܡ + + +# / + +֧־ͿֹͨͣһƱﵽ""RGBƺͱǺܺõӡԽԼܺģҲ̷ζѡ + +: `suspend_power_down_*``suspend_wakeup_init_*`, ֱϵͳкͻʱá + + +### suspend_power_down_user()suspend_wakeup_init_user()ʾʵ + + +```c +void suspend_power_down_user(void) { + rgb_matrix_set_suspend_state(true); +} + +void suspend_wakeup_init_user(void) { + rgb_matrix_set_suspend_state(false); +} +``` + +### / ĵ + +* /޶: `void suspend_power_down_kb(void)` `void suspend_wakeup_init_user(void)` +* : `void suspend_power_down_kb(void)` `void suspend_wakeup_init_user(void)` + +# ı + +ÿıд롣ڲָʾԶ㴦á + +### `layer_state_set_*` ʾʵ + +ʹPlanckʾ [RGB](feature_rgblight.md)ʹ֮Ӧ + +```c +uint32_t layer_state_set_user(uint32_t state) { + switch (biton32(state)) { + case _RAISE: + rgblight_setrgb (0x00, 0x00, 0xFF); + break; + case _LOWER: + rgblight_setrgb (0xFF, 0x00, 0x00); + break; + case _PLOVER: + rgblight_setrgb (0x00, 0xFF, 0x00); + break; + case _ADJUST: + rgblight_setrgb (0x7A, 0x00, 0xFF); + break; + default: // for any other layers, or the default layer + rgblight_setrgb (0x00, 0xFF, 0xFF); + break; + } + return state; +} +``` +### `layer_state_set_*` ĵ + +* /޶: `uint32_t layer_state_set_kb(uint32_t state)` +* : `uint32_t layer_state_set_user(uint32_t state)` + + +`״̬`ǻbitmask, [ָ](keymap.md#ֵIJ״̬) + + +# 籣 (EEPROM) + +óڵıڼСЩñصEEPROM粻ʧ ÿ`eeconfig_read_kb``eeconfig_read_user`ȡ`eeconfig_update_kb``eeconfig_update_user`д롣ϣܹлĹܺ(лRGBָʾ⣬`eeconfig_init_kb``eeconfig_init_user`EEPROMĬֵ + +ӵIJֿǣкܶ෽ͨEEPROM洢ͷݣҲûַǡȷġÿֻһ˫(ֽ)ռ䡣 + +סEEPROMдġдܸߣDzֻдEEPROMСдƵMCU̡ + +* ӣôϣʹԣΪ൱ӡ + +### ʾʵ + +ãҶдʹû֡һӵĺкܶҪʵϣʹ˺ܶ + + +keymap.cļУ´: +```c +typedef union { + uint32_t raw; + struct { + bool rgb_layer_change :1; + }; +} user_config_t; + +user_config_t user_config; +``` + +ϴ뽨һṹ壬ýṹԴ洢òдEEPROM㽫趨ΪڽṹȻ塣Ҫס`bool` ()ֵʹ1λ, `uint8_t`ʹ8λ, `uint16_t`ʹ16λԻϴʹã˳Ǵܻ鷳Ϊǻıддֵ + + `layer_state_set_*`ʹ`rgb_layer_change`ʹ`keyboard_post_init_user``process_record_user`һС + +Ҫʹ`keyboard_post_init_userҪ`eeconfig_read_user()`ոմĽṹ塣ȻʹṹIJеĹܡ +```c +void keyboard_post_init_user(void) { + // òּľʼ + + // EEPROMû + user_config.raw = eeconfig_read_user(); + + // ʹܣĬϲ + if (user_config.rgb_layer_change) { + rgblight_enable_noeeprom(); + rgblight_sethsv_noeeprom_cyan(); + rgblight_mode_noeeprom(1); + } +} +``` +ϺڶEEPROMúʹøĬϲRGBɫ"raw"ֵǴ"union"Ľṹתġ + +```c +uint32_t layer_state_set_user(uint32_t state) { + switch (biton32(state)) { + case _RAISE: + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); } + break; + case _LOWER: + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_red(); rgblight_mode_noeeprom(1); } + break; + case _PLOVER: + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_green(); rgblight_mode_noeeprom(1); } + break; + case _ADJUST: + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_white(); rgblight_mode_noeeprom(1); } + break; + default: // Ĭϲ + if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_cyan(); rgblight_mode_noeeprom(1); } + break; + } + return state; +} +``` +ֵʹʱıRGBơֵ, Ϊ`process_record_user`һ¼`RGB_LYR`ҪȷʹRGB룬ʹʾرգ뽫Ϊ +```c + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case FOO: + if (record->event.pressed) { + // ʱʲô + } else { + // ͷʱʲô + } + return false; // ˼Ľһ + case KC_ENTER: + // ڰ»سʱ + if (record->event.pressed) { + PLAY_NOTE_ARRAY(tone_qwerty); + } + return true; // QMKس/ͷ¼ + case RGB_LYR: // underglowΪָʾʹá + if (record->event.pressed) { + user_config.rgb_layer_change ^= 1; // л״̬ + eeconfig_update_user(user_config.raw); // EEPROMд״̬ + if (user_config.rgb_layer_change) { // ״̬ʹ + layer_state_set(layer_state); // ô̸²ɫ + } + } + return false; break; + case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // еRGB (see quantum_keycodes.h, L400 Բο) + if (record->event.pressed) { //ʧָܲʾıҪ + if (user_config.rgb_layer_change) { // ʹʱ + user_config.rgb_layer_change = false; // ʧܣȻ + eeconfig_update_user(user_config.raw); // EEPROMд + } + } + return true; break; + default: + return true; // + } +} +``` +Ҫ`eeconfig_init_user`ԵEEPROMʱָĬֵ, ԶǿEEPROM`EEP_RST`[Bootmagic](feature_bootmagic.md)磬ҪĬRGBָʾĬֵ + +```c +void eeconfig_init_user(void) { // EEPROM + user_config.raw = 0; + user_config.rgb_layer_change = true; // ҪĬʹ + eeconfig_update_user(user_config.raw); // EEPROMдĬֵ + + // use the non noeeprom versions, ҪEEPROMдЩֵ + rgblight_enable(); // ĬʹRGB + rgblight_sethsv_cyan(); // Ĭɫ + rgblight_mode(1); // Ĭó +} +``` + +ȻˡRGBָʾʱûһֱ棬¼̡ʹRGB룬ָʾʧܣˡ + +### 'EECONFIG' ĵ + +* /޶: `void eeconfig_init_kb(void)`, `uint32_t eeconfig_read_kb(void)``void eeconfig_update_kb(uint32_t val)` +* : `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)``void eeconfig_update_user(uint32_t val)` + +`val` дEEPROMֵ`eeconfig_read_*`EEPROMһ32λ(˫)ֵ + +# Զ-ٽֵ(TAPPING_TERM) +Ĭ,-ٽֵȫͳһģҲͨáڴû˵ܺáЩ£`LT`˵ʱ˫ܼ󣬿ΪЩļװסΪ˲ÿԶ룬ܿΪÿ`TAPPING_TERM` + +ʹܵĻ, Ҫ`config.h``#define TAPPING_TERM_PER_KEY` + + +## `get_tapping_term`ʾʵ + +Ҫ޸Ļڼ`TAPPING TERM`,Ҫ`keymap.c`ļ´: + +```c +uint16_t get_tapping_term(uint16_t keycode) { + switch (keycode) { + case SFT_T(KC_SPC): + return TAPPING_TERM + 1250; + case LT(1, KC_GRV): + return 130; + default: + return TAPPING_TERM; + } +} +``` + +### `get_tapping_term` ĵ + +ƪ,Ҫquantum߼̼ĺֻҪûɡ diff --git a/docs/zh-cn/faq_general.md b/docs/zh-cn/faq_general.md new file mode 100644 index 000000000..4949acb8c --- /dev/null +++ b/docs/zh-cn/faq_general.md @@ -0,0 +1,19 @@ +# + +## QMKʲô? + +[QMK](https://github.com/qmk), ӻе(Quantum Mechanical Keyboard)дһȺԴΪƼ̿ĹߡǴ[QMK̼](https://github.com/qmk/qmk_firmware)ʼ[TMK](https://github.com/tmk/tmk_keyboard)ħķֲ档 + +### Ϊʲô(Quantum)? + + + +## QMKTMKʲô? + +TMK[Jun Wako](https://github.com/tmk)ƺִСQMKʼ[Jack Humbert](https://github.com/jackhumbert)ΪPlanck̴TMKֲ档һʱJackķֲͺTMKȥԶˣ2015꣬JackQMK + +Ӽ۵QMKTMKһЩ¹ܶɵġQMKչ˿õļ룬ʹ߼ܽһḻ `S()`, `LCTL()`, `MO()`ȫ[](keycodes.md). + +ӹ̵TMKԼάйٷֵ֧ļֻ̣кСһ֧֡άѴڷֲΪ̴ķֲ档Ĭֺ֧ٵļ룬ûͨ˷֡QMKͨйֺֿͼ̣ǻз׼PRͼı֤άͬʱQMKСҲڱҪʱ + +ַŵȱ㣬ҴʱTMKQMK֮ diff --git a/docs/zh-cn/reference_glossary.md b/docs/zh-cn/reference_glossary.md new file mode 100644 index 000000000..7b9adcc2a --- /dev/null +++ b/docs/zh-cn/reference_glossary.md @@ -0,0 +1,170 @@ +# QMK术语表 + +## ARM +多家公司生产的32位单片机系列，例如Atmel, Cypress, Kinetis, NXP, ST, 和 TI等公司。 + +## AVR +[Atmel](http://www.microchip.com/)公司的单片机系列。 AVR是TMK的初始支持平台。 + +## AZERTY +Français (法国)标准键盘布局。用键盘的前六个字母命名。 + +## Backlight(背光) +键盘上照明的通称。背光通常是一组LED灯，通过键帽或者按轴发光，但也不总是这样。 + +## Bluetooth(蓝牙) +一种短距离点对点无线协议。许多多无线键盘使用此协议。 + +## Bootloader(引导加载程序) +一种写到你单片机的保护区的特殊的程序，该程序可以使单片机升级自己的固件，通常是通过USB来升级。 + +## Bootmagic(热改键) +允许各种键盘行为动态变化的功能，如交换或禁用常用键。 + +## C +一种适用于系统代码的低级编程语言。大多数qmk代码是用C编写的。 + +## Colemak +一种流行的键盘布局。 + +## Compile(编译) +把人可读的代码转换成你的单片机可以运行的机器代码的过程。 + +## Dvorak +一个由August Dvorak博士在20世纪30年代创建的布局。Dvorak简化键盘(Dvorak Simplified Keyboard)的缩写。 + +## Dynamic Macro(动态宏) +一种记录在键盘上的宏，当键盘拔出或计算机重新启动时，宏将丢失。 + +* [动态宏文档](feature_dynamic_macros.md) + +## Eclipse +是一种受C语言开发者追捧的集成开发环境(IDE)。 + +* [Eclipse安装说明](eclipse.md) + +## Firmware(固件) +用来控制单片机的软件。 + +## FLIP +爱特梅尔(Atmel)提供的AVR器件刷写软件。我们一般推荐 [QMK刷写工具](https://github.com/qmk/qmk_flasher)，但是对于一些高级用例，需要FLIP。 + +## git +命令行版本控制软件 + +## GitHub +负责大多数QMK项目的网站。它是Git、问题跟踪和其他帮助我们运行qmk的功能的集成平台。 + +## ISP(在系统编程) +在系统编程(In-system programming), 使用外部硬件和JTAG管脚对AVR芯片进行编程的一种方法。 + +## hid_listen +从键盘接收调试消息的接口。 您可以使用[QMK Flasher](https://github.com/qmk/qmk_flasher)或[PJRC's hid_listen](https://www.pjrc.com/teensy/hid_listen.html)查看这些消息 + +## Keycode(键码) +表示特定键的2字节数据。`0x00`-`0xFF`用于[基本键码](keycodes_basic.md)而`0x100`-`0xFFFF`用于[量子键码](quantum_keycodes.md). + +## Key Down +一个键按下尚未抬起时触发的事件。 + +## Key Up +一个键抬起时触发的事件。 + +## Keymap(键映射) +映射到物理键盘布局的一组键码，在按键和按键释放时进行处理。有时翻译为布局，意为软件上表示的布局，即映射。 + +## Layer(层) +为了让一个键实现多个功能的抽象结构。最高活动层有限。 + +## Leader Key(前导键、设置菜单键) +本功能允许您点击前导键，然后按顺序按1-3个键子来激活按键或其他量子功能。 + +* [前导键文档](feature_leader_key.md) + +## LED +发光二极管，键盘上最常用的指示灯装置。 + +## Make +用于编译所有源文件的软件包。可以使用`make`命令和其他参数来编译你的固件。 + +## Matrix(矩阵) +一种由列和行组成的接线模式，使单片机能够用较少的引脚检测按键。矩阵通常包含二极管，以达到全键无冲。 + +## Macro(宏) +本功能可以在敲击单个键后发送多个按键事件(hid报告)。 + +* [宏文档](feature_macros.md) + +## MCU(单片机、微控制单元) +微控制单元，键盘的处理器。 + +## Modifier(修改键、修饰键、功能键) +按住该键将会改变其他键的功能，修饰键包括 Ctrl, Alt, 和 Shift。 + +## Mousekeys(鼠标键) +本功能在您敲击键盘时会控制鼠标光标。 + +* [鼠标键文档](feature_mouse_keys.md) + +## N-Key Rollover (NKRO、全键无冲) +一种术语，适用于能够同时报告任意数量按键的键盘。 + +## Oneshot Modifier(粘滞键) +一种能让你的功能键一直保持按下，直到你按下其他键的功能。它叫做粘滞键或叫做粘连键，该功能由软件实现而非机械结构。 + +## ProMicro +一种低成本AVR开发板。这种板子很容易在购物网站找到(价格不到20RMB)，但是据说刷写pro micro有点令人抓狂。 + +## Pull Request(拉请求、PR) +向QMK请求提交代码。我们鼓励所有用户提交你们自己的键盘的代码。 + +## QWERTY +标准英文键盘，通常也用于其他语言，例如中文。是用键盘前6个字母命名的。 + +## QWERTZ +标准Deutsche(德语)键盘布局。使用前6个字母明名。 + +## Rollover(允许翻转、无冲形式) +该术语表示在一个键已按下时按下另一个键。形式包括2KRO(双键无冲),6KRO(6键无冲),和NKRO(全键无冲)，无冲表示可同时按下而不产生冲突的键的数量。 + +## Scancode(扫描码) +HID报告中的一个1字节的数字，表示一个键子。这些数字在下列文档中[HID Usage Tables](https://www.usb.org/sites/default/files/documents/hut1_12v2.pdf)该文档发布于[USB-IF](http://www.usb.org/)。 + +## Space Cadet键盘的shift键 +一种特使的shift设置，能让你通过敲击左或右shift一次或多次键入不同的括号。 + +* [Space Cadet键盘文档](feature_space_cadet.md) + +## Tap(敲击、单击) +按下并释放一个键。在某些情况下您需要区分键按下和键抬起，但是单击把两个事件都包括了。 + +## Tap Dance(多击键) +本功能允许向同一个键子分配多个键码，并根据按键次数区分。 + +* [多击键文档](feature_tap_dance.md) + +## Teensy +一种低成本AVR开发板，通常用于手工连线键盘。这个teensy是有点小贵但是halfkay bootloader会让它刷写十分简单，所以也很常用。 + +## Underlight(背光) +用于照亮电路板底面的LED的总称。这些LED通常从印刷电路板的底部向键盘所在的表面发光。 + +## Unicode +在较大的计算机世界中，Unicode是一组编码方案，用于表示任何语言中的字符。 与qmk相关的是，它意味着使用各种操作系统方案来发送Unicode代码点，而不是扫描码。 + +* [Unicode文档](feature_unicode.md) + +## Unit Testing(单元测试) +针对qmk的自动运行测试框架。单元测试帮助我们确信我们的更改不会破坏任何东西。 + +* [单元测试文档](unit_testing.md) + +## USB +通用串行总线，键盘最常见的有线接口。 + +## USB 主机 (或简易主机) +USB诸暨市你的电脑，或者你的键盘所插的任何设备。 + +# 并没有找到你想找到的术语? + +[建立一个issue](https://github.com/qmk/qmk_firmware/issues) ，想好你的问题，或许你所问的术语就会添加到这里。创建一个PR帮我们添加需要添加的术语当然坠吼了:) -- cgit v1.2.3-70-g09d2 From b2f7915994eb514a0348fdb864ead04c54c509c7 Mon Sep 17 00:00:00 2001 From: Alex Mayer Date: Wed, 5 Jun 2019 14:18:20 -0400 Subject: [Docs] Make Code Examples Consistent On Combo Page (#6078) --- docs/feature_combo.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_combo.md b/docs/feature_combo.md index 680adce2d..4cb1bcda0 100644 --- a/docs/feature_combo.md +++ b/docs/feature_combo.md @@ -29,6 +29,7 @@ enum combos { AB_ESC, JK_TAB }; + const uint16_t PROGMEM ab_combo[] = {KC_A, KC_B, COMBO_END}; const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END}; @@ -44,7 +45,7 @@ For a more complicated implementation, you can use the `process_combo_event` fun enum combo_events { ZC_COPY, XV_PASTE - }; +}; const uint16_t PROGMEM copy_combo[] = {KC_Z, KC_C, COMBO_END}; const uint16_t PROGMEM paste_combo[] = {KC_X, KC_V, COMBO_END}; -- cgit v1.2.3-70-g09d2 From 4f2f2271cda85c3939deb3f61bbd9430e38a20fc Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Wed, 5 Jun 2019 13:53:11 -0400 Subject: Change from avr-gcc@7 to @8 for Mac --- docs/faq_build.md | 4 ++-- docs/getting_started_build_tools.md | 6 +++--- docs/zh-cn/faq_build.md | 4 ++-- util/macos_install.sh | 4 ++-- 4 files changed, 9 insertions(+), 9 deletions(-) (limited to 'docs') diff --git a/docs/faq_build.md b/docs/faq_build.md index 0c1bedd71..23d6a6702 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -140,8 +140,8 @@ For now, you need to rollback avr-gcc to 7 in brew. ``` brew uninstall --force avr-gcc -brew install avr-gcc@7 -brew link --force avr-gcc@7 +brew install avr-gcc@8 +brew link --force avr-gcc@8 ``` ### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019) diff --git a/docs/getting_started_build_tools.md b/docs/getting_started_build_tools.md index 0e1acca66..268cc94c3 100644 --- a/docs/getting_started_build_tools.md +++ b/docs/getting_started_build_tools.md @@ -62,14 +62,14 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands: brew tap osx-cross/avr brew tap PX4/homebrew-px4 brew update - brew install avr-gcc@7 - brew link --force avr-gcc@7 + brew install avr-gcc@8 + brew link --force avr-gcc@8 brew install dfu-programmer brew install dfu-util brew install gcc-arm-none-eabi brew install avrdude -This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@7` can take over 20 minutes and exhibit high CPU usage. +This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@8` can take over 20 minutes and exhibit high CPU usage. ## Windows with msys2 (recommended) diff --git a/docs/zh-cn/faq_build.md b/docs/zh-cn/faq_build.md index 60d902007..8fb449db3 100644 --- a/docs/zh-cn/faq_build.md +++ b/docs/zh-cn/faq_build.md @@ -137,8 +137,8 @@ brew install avrdude ``` brew uninstall --force avr-gcc -brew install avr-gcc@7 -brew link --force avr-gcc@7 +brew install avr-gcc@8 +brew link --force avr-gcc@8 ``` ### 我刷新了我的键盘但是键盘不工作/按键没有注册 - 而且还是ARM的 (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019) diff --git a/util/macos_install.sh b/util/macos_install.sh index 93f3ed0b9..915ff3143 100755 --- a/util/macos_install.sh +++ b/util/macos_install.sh @@ -22,5 +22,5 @@ fi brew tap osx-cross/avr brew tap PX4/homebrew-px4 brew update -brew install avr-gcc@7 gcc-arm-none-eabi dfu-programmer avrdude dfu-util python3 -brew link --force avr-gcc@7 +brew install avr-gcc@8 gcc-arm-none-eabi dfu-programmer avrdude dfu-util python3 +brew link --force avr-gcc@8 -- cgit v1.2.3-70-g09d2 From 91b0c75045c38a9c770f7835b928b3b298a1ff8f Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 6 Jun 2019 01:01:24 -0400 Subject: Add meta tags for docs --- docs/index.html | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/index.html b/docs/index.html index d6fdbdbcc..995d6b8f8 100644 --- a/docs/index.html +++ b/docs/index.html @@ -5,7 +5,11 @@ QMK Firmware - + + + + + -- cgit v1.2.3-70-g09d2 From 834a8d1da18688eefe3e9e01f75f3e936f156e10 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 6 Jun 2019 01:07:54 -0400 Subject: add type:object to docs meta info (github uses it) --- docs/index.html | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/index.html b/docs/index.html index 995d6b8f8..77a8085bf 100644 --- a/docs/index.html +++ b/docs/index.html @@ -7,7 +7,8 @@ - + + -- cgit v1.2.3-70-g09d2 From fe6b8edd581c334a92a97c15faced95a12d5e882 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 6 Jun 2019 01:23:18 -0400 Subject: use twitter card large setting for larger previews --- docs/index.html | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/index.html b/docs/index.html index 77a8085bf..819045072 100644 --- a/docs/index.html +++ b/docs/index.html @@ -7,10 +7,11 @@ - + + -- cgit v1.2.3-70-g09d2 From faaaa134fd436be400aa2c7841b38907899d49a6 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 6 Jun 2019 12:09:56 -0700 Subject: Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997) --- docs/config_options.md | 2 +- docs/feature_bootmagic.md | 2 +- keyboards/1upkeyboards/1up60hse/config.h | 2 +- keyboards/1upkeyboards/1up60hte/config.h | 4 ++-- keyboards/1upkeyboards/1up60rgb/config.h | 2 +- keyboards/1upkeyboards/super16/config.h | 2 +- keyboards/1upkeyboards/sweet16/config.h | 3 +-- keyboards/40percentclub/25/config.h | 2 +- keyboards/40percentclub/4x4/config.h | 2 +- keyboards/40percentclub/5x5/config.h | 2 +- keyboards/40percentclub/6lit/config.h | 2 +- keyboards/40percentclub/foobar/config.h | 2 +- keyboards/40percentclub/gherkin/config.h | 2 +- keyboards/40percentclub/half_n_half/config.h | 2 +- keyboards/40percentclub/i75/config.h | 2 +- keyboards/40percentclub/luddite/config.h | 2 +- keyboards/40percentclub/mf68/config.h | 2 +- keyboards/40percentclub/nein/config.h | 2 +- keyboards/40percentclub/nori/config.h | 2 +- keyboards/40percentclub/tomato/config.h | 2 +- keyboards/40percentclub/ut47/config.h | 2 +- keyboards/abstract/ellipse/rev1/config.h | 2 +- keyboards/acr60/config.h | 2 +- keyboards/adkb96/rev1/config.h | 5 ++--- keyboards/aeboards/aegis/config.h | 3 +-- keyboards/ai03/lunar/config.h | 4 ++-- keyboards/ai03/orbit/config.h | 2 +- keyboards/al1/config.h | 2 +- keyboards/al1/matrix.c | 8 ++++---- keyboards/alf/dc60/config.h | 2 +- keyboards/alf/x11/config.h | 2 +- keyboards/alf/x2/config.h | 2 +- keyboards/alpha/config.h | 2 +- keyboards/alu84/config.h | 2 +- keyboards/amj40/config.h | 2 +- keyboards/amj60/config.h | 2 +- keyboards/amj96/config.h | 2 +- keyboards/amjpad/config.h | 2 +- keyboards/ares/config.h | 4 ++-- keyboards/at101_blackheart/config.h | 2 +- keyboards/atom47/rev2/config.h | 2 +- keyboards/atom47/rev3/config.h | 2 +- keyboards/atomic/config.h | 2 +- keyboards/atomic/keymaps/pvc/config.h | 2 +- keyboards/atreus/config.h | 2 +- keyboards/atreus/keymaps/alphadox/config.h | 2 +- keyboards/atreus/keymaps/dvorak_42_key/config.h | 2 +- keyboards/atreus/keymaps/erlandsona/config.h | 2 +- keyboards/atreus62/config.h | 2 +- keyboards/baguette/baguette.c | 2 +- keyboards/baguette/config.h | 2 +- keyboards/bantam44/config.h | 2 +- keyboards/bfake/config.h | 2 +- keyboards/bigseries/1key/config.h | 2 +- keyboards/bigseries/2key/config.h | 2 +- keyboards/bigseries/3key/config.h | 2 +- keyboards/bigseries/4key/config.h | 2 +- keyboards/bigswitch/config.h | 2 +- keyboards/bigswitch/keymaps/wanleg/config.h | 4 ++-- keyboards/blockey/config.h | 2 +- keyboards/bm16a/config.h | 2 +- keyboards/bm16s/config.h | 2 +- keyboards/boardwalk/config.h | 2 +- keyboards/bpiphany/frosty_flake/config.h | 2 +- keyboards/bpiphany/frosty_flake/matrix.c | 8 ++++---- keyboards/bpiphany/kitten_paw/config.h | 2 +- keyboards/bpiphany/kitten_paw/matrix.c | 8 ++++---- keyboards/bpiphany/pegasushoof/config.h | 2 +- keyboards/bpiphany/pegasushoof/matrix.c | 4 ++-- keyboards/bpiphany/sixshooter/config.h | 2 +- keyboards/bpiphany/tiger_lily/config.h | 2 +- keyboards/bpiphany/tiger_lily/matrix.c | 8 ++++---- keyboards/bpiphany/unloved_bastard/config.h | 2 +- keyboards/bpiphany/unloved_bastard/matrix.c | 8 ++++---- keyboards/bthlabs/geekpad/config.h | 2 +- keyboards/butterstick/config.h | 3 +-- keyboards/canoe/config.h | 2 +- keyboards/catch22/config.h | 2 +- keyboards/christmas_tree/config.h | 2 +- keyboards/ckeys/handwire_101/config.h | 2 +- keyboards/ckeys/nakey/config.h | 2 +- keyboards/ckeys/obelus/config.h | 2 +- keyboards/claw44/rev1/config.h | 2 +- keyboards/clueboard/17/config.h | 2 +- keyboards/clueboard/2x1800/config.h | 2 +- keyboards/clueboard/66/rev1/config.h | 2 +- keyboards/clueboard/66/rev2/config.h | 2 +- keyboards/clueboard/66/rev3/config.h | 2 +- keyboards/clueboard/66/rev4/config.h | 2 +- keyboards/clueboard/66_hotswap/config.h | 2 +- keyboards/clueboard/card/config.h | 2 +- keyboards/contra/config.h | 2 +- keyboards/converter/hp_46010a/config.h | 4 +--- keyboards/converter/hp_46010a/matrix.c | 14 +++++++------- keyboards/converter/ibm_5291/config.h | 4 +--- keyboards/converter/ibm_5291/matrix.c | 16 ++++++++-------- keyboards/converter/modelm101/config.h | 4 ++-- keyboards/converter/numeric_keypad_IIe/config.h | 6 +++--- keyboards/coseyfannitutti/mullet/config.h | 3 +-- keyboards/coseyfannitutti/mulletpad/config.h | 3 +-- keyboards/cospad/config.h | 2 +- keyboards/crawlpad/config.h | 3 +-- keyboards/crkbd/rev1/config.h | 2 +- keyboards/cu24/config.h | 4 ++-- keyboards/cu75/config.h | 2 +- keyboards/daisy/config.h | 4 ++-- keyboards/dc01/arrow/config.h | 2 +- keyboards/dc01/arrow/matrix.c | 16 ++++++++-------- keyboards/dc01/left/config.h | 2 +- keyboards/dc01/left/matrix.c | 16 ++++++++-------- keyboards/dc01/numpad/config.h | 2 +- keyboards/dc01/numpad/matrix.c | 16 ++++++++-------- keyboards/dc01/right/config.h | 2 +- keyboards/dc01/right/matrix.c | 16 ++++++++-------- keyboards/deltasplit75/matrix.c | 14 +++++++------- keyboards/deltasplit75/v2/config.h | 2 +- keyboards/diverge3/config.h | 2 +- keyboards/divergetm2/config.h | 2 +- keyboards/dk60/config.h | 2 +- keyboards/do60/config.h | 2 +- keyboards/donutcables/budget96/config.h | 2 +- keyboards/donutcables/scrabblepad/config.h | 2 +- keyboards/doro67/rgb/config.h | 4 ++-- keyboards/dozen0/config.h | 2 +- keyboards/duck/eagle_viper/v2/config.h | 3 +-- keyboards/duck/eagle_viper/v2/matrix.c | 4 ++-- keyboards/duck/jetfire/config.h | 2 +- keyboards/duck/jetfire/matrix.c | 4 ++-- keyboards/duck/lightsaver/config.h | 3 +-- keyboards/duck/lightsaver/matrix.c | 4 ++-- keyboards/duck/octagon/v1/config.h | 2 +- keyboards/duck/octagon/v1/matrix.c | 4 ++-- keyboards/duck/octagon/v2/config.h | 3 +-- keyboards/duck/octagon/v2/matrix.c | 4 ++-- keyboards/dz60/config.h | 2 +- keyboards/dz60/keymaps/LEdiodes/config.h | 2 +- keyboards/eco/config.h | 2 +- keyboards/ep/40/config.h | 2 +- keyboards/ep/96/config.h | 2 +- keyboards/ergo42/matrix.c | 14 +++++++------- keyboards/ergo42/rev1/config.h | 2 +- keyboards/ergodash/mini/config.h | 2 +- keyboards/ergodash/rev1/config.h | 2 +- keyboards/ergoinu/config.h | 2 +- keyboards/ergotravel/rev1/config.h | 2 +- keyboards/espectro/config.h | 2 +- keyboards/evil80/config.h | 2 +- keyboards/exclusive/e6v2/le/config.h | 2 +- keyboards/exclusive/e6v2/oe/config.h | 2 +- keyboards/exclusive/e7v1/config.h | 2 +- keyboards/facew/config.h | 2 +- keyboards/fc660c/config.h | 2 +- keyboards/fc980c/config.h | 2 +- keyboards/felix/config.h | 2 +- keyboards/fleuron/config.h | 2 +- keyboards/fortitude60/matrix.c | 14 +++++++------- keyboards/fortitude60/rev1/config.h | 2 +- keyboards/four_banger/config.h | 2 +- keyboards/foxlab/leaf60/hotswap/config.h | 2 +- keyboards/foxlab/leaf60/universal/config.h | 2 +- keyboards/fractal/config.h | 2 +- keyboards/ft/mars80/config.h | 3 +-- keyboards/gh60/config.h | 2 +- keyboards/gh60/keymaps/dbroqua/config.h | 2 +- keyboards/gh60/keymaps/robotmaxtron/config.h | 2 +- keyboards/gh80_3000/config.h | 2 +- keyboards/gonnerd/config.h | 2 +- keyboards/gray_studio/cod67/config.h | 2 +- keyboards/gray_studio/space65/config.h | 2 +- keyboards/gskt00/config.h | 2 +- keyboards/hadron/config.h | 2 +- keyboards/halberd/config.h | 4 +--- keyboards/handwired/108key_trackpoint/config.h | 2 +- keyboards/handwired/412_64/config.h | 2 +- keyboards/handwired/arrow_pad/config.h | 2 +- keyboards/handwired/arrow_pad/keymaps/pad_21/config.h | 2 +- keyboards/handwired/arrow_pad/keymaps/pad_24/config.h | 2 +- keyboards/handwired/atreus50/config.h | 2 +- keyboards/handwired/cmd60/config.h | 2 +- keyboards/handwired/dactyl/matrix.c | 16 ++++++++-------- keyboards/handwired/dactyl_manuform/config.h | 2 +- keyboards/handwired/dactyl_promicro/config.h | 2 +- keyboards/handwired/daishi/config.h | 2 +- keyboards/handwired/datahand/config.h | 2 +- keyboards/handwired/downbubble/config.h | 2 +- keyboards/handwired/fivethirteen/config.h | 2 +- keyboards/handwired/gamenum/config.h | 2 +- keyboards/handwired/hacked_motospeed/config.h | 2 +- keyboards/handwired/hexon38/config.h | 2 +- keyboards/handwired/ibm122m/config.h | 2 +- keyboards/handwired/jn68m/config.h | 2 +- keyboards/handwired/jot50/config.h | 2 +- keyboards/handwired/jotanck/config.h | 2 +- keyboards/handwired/jotpad16/config.h | 3 +-- keyboards/handwired/kbod/config.h | 2 +- keyboards/handwired/maartenwut/config.h | 2 +- keyboards/handwired/magicforce61/config.h | 2 +- keyboards/handwired/magicforce68/config.h | 2 +- keyboards/handwired/mechboards_micropad/config.h | 2 +- keyboards/handwired/minorca/config.h | 2 +- keyboards/handwired/ms_sculpt_mobile/config.h | 2 +- keyboards/handwired/not_so_minidox/config.h | 2 +- keyboards/handwired/numbrero/config.h | 2 +- keyboards/handwired/numpad20/config.h | 2 +- keyboards/handwired/ortho5x13/config.h | 2 +- keyboards/handwired/pilcrow/config.h | 2 +- keyboards/handwired/prime_exl/config.h | 2 +- keyboards/handwired/promethium/config.h | 2 +- keyboards/handwired/promethium/matrix.c | 15 +++++++-------- keyboards/handwired/pteron/config.h | 2 +- keyboards/handwired/qc60/config.h | 2 +- keyboards/handwired/reddot/config.h | 2 +- keyboards/handwired/retro_refit/config.h | 2 +- keyboards/handwired/space_oddity/config.h | 2 +- keyboards/handwired/splittest/config.h | 2 +- keyboards/handwired/tennie/config.h | 2 +- keyboards/handwired/terminus_mini/config.h | 2 +- keyboards/handwired/trackpoint/config.h | 2 +- keyboards/handwired/tradestation/config.h | 2 +- keyboards/handwired/traveller/config.h | 2 +- keyboards/handwired/woodpad/config.h | 2 +- keyboards/handwired/xealous/rev1/config.h | 2 +- keyboards/hecomi/alpha/config.h | 2 +- keyboards/helix/pico/config.h | 2 +- keyboards/helix/rev1/config.h | 2 +- keyboards/helix/rev2/config.h | 2 +- keyboards/hid_liber/config.h | 2 +- keyboards/hifumi/config.h | 2 +- keyboards/hineybush/h87a/config.h | 2 +- keyboards/hineybush/hineyg80/config.h | 3 +-- keyboards/hs60/v1/config.h | 2 +- keyboards/hs60/v1/v1.c | 2 +- keyboards/hs60/v2/config.h | 2 +- keyboards/idobo/config.h | 2 +- keyboards/jc65/v32u4/config.h | 2 +- keyboards/jd40/config.h | 2 +- keyboards/jd45/config.h | 2 +- keyboards/jd45/keymaps/mjt/config.h | 2 +- keyboards/jj40/config.h | 2 +- keyboards/jj4x4/config.h | 2 +- keyboards/kagamidget/config.h | 2 +- keyboards/katana60/config.h | 2 +- keyboards/kbdfans/kbd19x/config.h | 2 +- keyboards/kbdfans/kbd4x/config.h | 2 +- keyboards/kbdfans/kbd66/config.h | 3 +-- keyboards/kbdfans/kbd67/hotswap/config.h | 2 +- keyboards/kbdfans/kbd67/rev1/config.h | 2 +- keyboards/kbdfans/kbd67/rev2/config.h | 2 +- keyboards/kbdfans/kbd6x/config.h | 2 +- keyboards/kbdfans/kbd75/config.h | 2 +- keyboards/kbdfans/kbd8x/config.h | 2 +- keyboards/kc60/config.h | 2 +- keyboards/kc60se/config.h | 2 +- keyboards/keebio/bdn9/config.h | 2 +- keyboards/keebio/bfo9000/config.h | 2 +- keyboards/keebio/chocopad/config.h | 2 +- keyboards/keebio/dilly/config.h | 2 +- keyboards/keebio/fourier/config.h | 2 +- keyboards/keebio/levinson/rev1/config.h | 2 +- keyboards/keebio/levinson/rev2/config.h | 2 +- keyboards/keebio/nyquist/rev1/config.h | 2 +- keyboards/keebio/nyquist/rev2/config.h | 2 +- keyboards/keebio/nyquist/rev3/config.h | 2 +- keyboards/keebio/quefrency/rev1/config.h | 2 +- keyboards/keebio/rorschach/rev1/config.h | 2 +- keyboards/keebio/tragicforce68/config.h | 2 +- keyboards/keebio/viterbi/rev1/config.h | 2 +- keyboards/keebio/viterbi/rev2/config.h | 2 +- keyboards/keebio/wavelet/config.h | 2 +- keyboards/keycapsss/o4l_5x12/config.h | 2 +- keyboards/kinesis/config.h | 2 +- keyboards/kinesis/stapelberg/config.h | 2 +- keyboards/kira75/config.h | 2 +- keyboards/kmac/config.h | 2 +- keyboards/kmac/matrix.c | 6 +++--- keyboards/kmini/config.h | 2 +- keyboards/kmini/matrix.c | 6 +++--- keyboards/knops/mini/config.h | 2 +- keyboards/kona_classic/config.h | 2 +- keyboards/laptreus/config.h | 2 +- keyboards/launchpad/config.h | 2 +- keyboards/lazydesigners/dimple/config.h | 2 +- keyboards/lazydesigners/the50/config.h | 2 +- keyboards/lazydesigners/the60/config.h | 2 +- keyboards/lets_split/rev1/config.h | 2 +- keyboards/lets_split/rev2/config.h | 2 +- keyboards/lets_split/sockets/config.h | 2 +- keyboards/lets_split_eh/config.h | 2 +- keyboards/lfkeyboards/lfk65_hs/config.h | 2 +- keyboards/lfkeyboards/lfk78/config.h | 2 +- keyboards/lfkeyboards/lfk87/config.h | 2 +- keyboards/lfkeyboards/lfkpad/config.h | 2 +- keyboards/lfkeyboards/mini1800/config.h | 2 +- keyboards/lfkeyboards/smk65/config.h | 2 +- keyboards/lily58/matrix.c | 14 +++++++------- keyboards/lily58/rev1/config.h | 2 +- keyboards/m0lly/config.h | 2 +- keyboards/m10a/config.h | 2 +- keyboards/massdrop/alt/config.h | 2 +- keyboards/massdrop/alt/matrix.c | 2 +- keyboards/massdrop/ctrl/config.h | 2 +- keyboards/massdrop/ctrl/matrix.c | 2 +- keyboards/maxipad/config.h | 2 +- keyboards/mechkeys/mk60/config.h | 2 +- keyboards/mechmini/v2/config.h | 2 +- keyboards/meira/featherble/config.h | 2 +- keyboards/meira/matrix.c | 14 ++++++-------- keyboards/meira/promicro/config.h | 2 +- keyboards/meishi/config.h | 3 +-- keyboards/melody96/config.h | 2 +- keyboards/meme/config.h | 2 +- keyboards/miniaxe/config.h | 2 +- keyboards/minidox/config.h | 2 +- keyboards/mint60/config.h | 2 +- keyboards/miuni32/config.h | 2 +- keyboards/model01/config.h | 2 +- keyboards/mt40/config.h | 2 +- keyboards/mt980/config.h | 2 +- keyboards/mxss/config.h | 2 +- keyboards/namecard2x4/rev1/config.h | 2 +- keyboards/namecard2x4/rev2/config.h | 2 +- keyboards/nek_type_a/config.h | 4 +--- keyboards/nek_type_a/matrix.c | 16 ++++++++-------- keyboards/niu_mini/config.h | 2 +- keyboards/nk65/config.h | 2 +- keyboards/novelpad/config.h | 2 +- keyboards/noxary/220/config.h | 2 +- keyboards/noxary/260/config.h | 2 +- keyboards/noxary/268/config.h | 2 +- keyboards/noxary/268_2/config.h | 2 +- keyboards/noxary/280/config.h | 2 +- keyboards/noxary/x268/config.h | 2 +- keyboards/ok60/config.h | 2 +- keyboards/omnikey_blackheart/config.h | 2 +- keyboards/orange75/config.h | 2 +- keyboards/org60/config.h | 2 +- keyboards/orthodox/rev1/config.h | 2 +- keyboards/orthodox/rev3/config.h | 2 +- keyboards/orthodox/rev3_teensy/config.h | 2 +- keyboards/paladin64/config.h | 2 +- keyboards/panc60/config.h | 2 +- keyboards/pearl/config.h | 2 +- keyboards/phantom/config.h | 2 +- keyboards/pinky/3/config.h | 2 +- keyboards/pinky/4/config.h | 2 +- keyboards/plaid/config.h | 2 +- keyboards/plain60/config.h | 2 +- keyboards/planck/config.h | 2 +- keyboards/planck/keymaps/dodger/config.h | 2 +- keyboards/playkbtw/ca66/ca66.c | 2 +- keyboards/playkbtw/ca66/config.h | 2 +- keyboards/playkbtw/pk60/config.h | 2 +- keyboards/preonic/config.h | 2 +- keyboards/preonic/keymaps/kinesis/config.h | 2 +- keyboards/preonic/keymaps/zach/config.h | 2 +- keyboards/primekb/prime_e/config.h | 2 +- keyboards/primekb/prime_l/config.h | 2 +- keyboards/primekb/prime_m/config.h | 2 +- keyboards/primekb/prime_o/config.h | 2 +- keyboards/primekb/prime_r/config.h | 2 +- keyboards/puck/config.h | 2 +- keyboards/quantrik/kyuu/config.h | 2 +- keyboards/qwertyydox/config.h | 2 +- keyboards/qwertyydox/rev1/config.h | 2 +- keyboards/rama/koyu/config.h | 2 +- keyboards/rama/m10_b/config.h | 2 +- keyboards/rama/m60_a/config.h | 2 +- keyboards/rama/m6_a/config.h | 2 +- keyboards/rama/m6_b/config.h | 2 +- keyboards/rama/u80_a/config.h | 2 +- keyboards/redox/rev1/config.h | 2 +- keyboards/rgbkb/sol/config.h | 2 +- keyboards/rgbkb/zen/rev1/config.h | 2 +- keyboards/rgbkb/zen/rev2/config.h | 2 +- keyboards/rgbkb/zygomorph/rev1/config.h | 2 +- keyboards/romac/config.h | 2 +- keyboards/s7_elephant/config.h | 2 +- keyboards/satan/config.h | 2 +- keyboards/satan/keymaps/admiralStrokers/config.h | 2 +- keyboards/satan/keymaps/fakb/config.h | 2 +- keyboards/scarletbandana/config.h | 2 +- keyboards/scythe/config.h | 3 +-- keyboards/sentraq/number_pad/config.h | 2 +- keyboards/sentraq/s60_x/default/config.h | 3 +-- keyboards/sentraq/s60_x/keymaps/bluebear/config.h | 2 +- keyboards/sentraq/s60_x/rgb/config.h | 3 +-- keyboards/sentraq/s65_plus/config.h | 2 +- keyboards/sentraq/s65_x/config.h | 2 +- keyboards/signum/3_0/elitec/config.h | 2 +- keyboards/singa/config.h | 2 +- keyboards/sixkeyboard/config.h | 2 +- keyboards/snagpad/config.h | 2 +- keyboards/southpole/config.h | 2 +- keyboards/speedo/config.h | 2 +- keyboards/standaside/config.h | 3 +-- keyboards/staryu/config.h | 2 +- keyboards/subatomic/config.h | 2 +- keyboards/sx60/config.h | 2 +- keyboards/sx60/matrix.c | 14 +++++++------- keyboards/tada68/config.h | 2 +- keyboards/tetris/config.h | 3 +-- keyboards/the_ruler/config.h | 2 +- keyboards/thevankeyboards/bananasplit/config.h | 2 +- keyboards/thevankeyboards/minivan/config.h | 2 +- keyboards/thevankeyboards/minivan/keymaps/budi/config.h | 6 +++--- keyboards/thevankeyboards/roadkit/config.h | 2 +- keyboards/tkc1800/config.h | 2 +- keyboards/tmo50/config.h | 2 +- keyboards/toad/config.h | 2 +- keyboards/tokyo60/config.h | 2 +- keyboards/touchpad/config.h | 2 +- keyboards/treadstone32/config.h | 2 +- keyboards/treadstone48/rev1/config.h | 2 +- keyboards/treasure/type9/config.h | 2 +- keyboards/uk78/config.h | 2 +- keyboards/ut472/config.h | 2 +- keyboards/v60_type_r/config.h | 2 +- keyboards/vision_division/config.h | 2 +- keyboards/vitamins_included/matrix.c | 14 +++++++------- keyboards/vitamins_included/rev1/config.h | 2 +- keyboards/waldo/config.h | 2 +- keyboards/wasdat/config.h | 2 +- keyboards/westfoxtrot/aanzee/config.h | 2 +- keyboards/westfoxtrot/cyclops/config.h | 4 ++-- keyboards/westfoxtrot/cypher/config.h | 2 +- keyboards/wilba_tech/wt60_a/config.h | 2 +- keyboards/wilba_tech/wt65_a/config.h | 2 +- keyboards/wilba_tech/wt69_a/config.h | 2 +- keyboards/wilba_tech/wt75_a/config.h | 2 +- keyboards/wilba_tech/wt80_a/config.h | 2 +- keyboards/wilba_tech/wt8_a/config.h | 2 +- keyboards/xd60/rev2/config.h | 2 +- keyboards/xd60/rev3/config.h | 2 +- keyboards/xd75/config.h | 4 ++-- keyboards/xd84/config.h | 2 +- keyboards/xd87/config.h | 2 +- keyboards/xd96/config.h | 2 +- keyboards/xmmx/config.h | 2 +- keyboards/yd60mq/config.h | 3 +-- keyboards/yd68/config.h | 2 +- keyboards/yosino58/rev1/config.h | 4 ++-- keyboards/z150_blackheart/config.h | 2 +- keyboards/zeal60/config.h | 2 +- keyboards/zeal60/zeal60.c | 5 ++--- keyboards/zeal65/config.h | 2 +- keyboards/zinc/rev1/config.h | 4 ++-- keyboards/zinc/reva/config.h | 4 ++-- keyboards/zlant/config.h | 2 +- 448 files changed, 594 insertions(+), 627 deletions(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index cab3c0747..f4035809a 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -83,7 +83,7 @@ This is a C header file that is one of the first things included, and will persi * enables backlight breathing (only works with backlight pins B5, B6 and B7) * `#define BREATHING_PERIOD 6` * the length of one backlight "breath" in seconds -* `#define DEBOUNCING_DELAY 5` +* `#define DEBOUNCE 5` * the delay when reading the value of the pin (5 is default) * `#define LOCKING_SUPPORT_ENABLE` * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap diff --git a/docs/feature_bootmagic.md b/docs/feature_bootmagic.md index 39e4e47f4..225189ccb 100644 --- a/docs/feature_bootmagic.md +++ b/docs/feature_bootmagic.md @@ -140,7 +140,7 @@ To replace the function, all you need to do is add something like this to your c ```c void bootmagic_lite(void) { matrix_scan(); - wait_ms(DEBOUNCING_DELAY * 2); + wait_ms(DEBOUNCE * 2); matrix_scan(); if (matrix_get_row(BOOTMAGIC_LITE_ROW) & (1 << BOOTMAGIC_LITE_COLUMN)) { diff --git a/keyboards/1upkeyboards/1up60hse/config.h b/keyboards/1upkeyboards/1up60hse/config.h index 188603622..3781d7bcf 100644 --- a/keyboards/1upkeyboards/1up60hse/config.h +++ b/keyboards/1upkeyboards/1up60hse/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/1upkeyboards/1up60hte/config.h b/keyboards/1upkeyboards/1up60hte/config.h index 892a8b9fe..bcf6329f7 100644 --- a/keyboards/1upkeyboards/1up60hte/config.h +++ b/keyboards/1upkeyboards/1up60hte/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -62,4 +62,4 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 -#endif \ No newline at end of file +#endif diff --git a/keyboards/1upkeyboards/1up60rgb/config.h b/keyboards/1upkeyboards/1up60rgb/config.h index fbafe0c44..6cf5b6904 100644 --- a/keyboards/1upkeyboards/1up60rgb/config.h +++ b/keyboards/1upkeyboards/1up60rgb/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/1upkeyboards/super16/config.h b/keyboards/1upkeyboards/super16/config.h index 4af4dda63..a50821637 100644 --- a/keyboards/1upkeyboards/super16/config.h +++ b/keyboards/1upkeyboards/super16/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/1upkeyboards/sweet16/config.h b/keyboards/1upkeyboards/sweet16/config.h index b05b57740..23b590c2c 100644 --- a/keyboards/1upkeyboards/sweet16/config.h +++ b/keyboards/1upkeyboards/sweet16/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -45,4 +45,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - diff --git a/keyboards/40percentclub/25/config.h b/keyboards/40percentclub/25/config.h index 7381a76d9..c9c02b47e 100644 --- a/keyboards/40percentclub/25/config.h +++ b/keyboards/40percentclub/25/config.h @@ -71,7 +71,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/4x4/config.h b/keyboards/40percentclub/4x4/config.h index 3b41e501d..09ec5a4ec 100644 --- a/keyboards/40percentclub/4x4/config.h +++ b/keyboards/40percentclub/4x4/config.h @@ -38,7 +38,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/5x5/config.h b/keyboards/40percentclub/5x5/config.h index f1c348a48..a9d294bc9 100644 --- a/keyboards/40percentclub/5x5/config.h +++ b/keyboards/40percentclub/5x5/config.h @@ -47,7 +47,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/6lit/config.h b/keyboards/40percentclub/6lit/config.h index c6beafa41..110362a62 100644 --- a/keyboards/40percentclub/6lit/config.h +++ b/keyboards/40percentclub/6lit/config.h @@ -72,7 +72,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/foobar/config.h b/keyboards/40percentclub/foobar/config.h index 1443c1ca1..15af4ad5b 100644 --- a/keyboards/40percentclub/foobar/config.h +++ b/keyboards/40percentclub/foobar/config.h @@ -72,7 +72,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/gherkin/config.h b/keyboards/40percentclub/gherkin/config.h index d0c2be35b..4dc794e34 100644 --- a/keyboards/40percentclub/gherkin/config.h +++ b/keyboards/40percentclub/gherkin/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/40percentclub/half_n_half/config.h b/keyboards/40percentclub/half_n_half/config.h index c74fcacbb..cd7515f0b 100644 --- a/keyboards/40percentclub/half_n_half/config.h +++ b/keyboards/40percentclub/half_n_half/config.h @@ -81,7 +81,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/i75/config.h b/keyboards/40percentclub/i75/config.h index 611ae62b3..f9b5d57dd 100644 --- a/keyboards/40percentclub/i75/config.h +++ b/keyboards/40percentclub/i75/config.h @@ -27,7 +27,7 @@ #define DESCRIPTION i75 15x5 ortholinear keyboard /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/luddite/config.h b/keyboards/40percentclub/luddite/config.h index 5a6f2c799..36bda0614 100644 --- a/keyboards/40percentclub/luddite/config.h +++ b/keyboards/40percentclub/luddite/config.h @@ -26,7 +26,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/40percentclub/mf68/config.h b/keyboards/40percentclub/mf68/config.h index 25252d160..5bda9bb78 100644 --- a/keyboards/40percentclub/mf68/config.h +++ b/keyboards/40percentclub/mf68/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/nein/config.h b/keyboards/40percentclub/nein/config.h index 05fd93d24..da1bc91dd 100644 --- a/keyboards/40percentclub/nein/config.h +++ b/keyboards/40percentclub/nein/config.h @@ -76,7 +76,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/nori/config.h b/keyboards/40percentclub/nori/config.h index a3366de62..ecaa68ada 100644 --- a/keyboards/40percentclub/nori/config.h +++ b/keyboards/40percentclub/nori/config.h @@ -60,7 +60,7 @@ #define RGBLIGHT_VAL_STEP 8 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/40percentclub/tomato/config.h b/keyboards/40percentclub/tomato/config.h index db90d8042..e131ce5c2 100644 --- a/keyboards/40percentclub/tomato/config.h +++ b/keyboards/40percentclub/tomato/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/40percentclub/ut47/config.h b/keyboards/40percentclub/ut47/config.h index 87f2bedd7..25ef4271f 100644 --- a/keyboards/40percentclub/ut47/config.h +++ b/keyboards/40percentclub/ut47/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h index 4fcf96eb3..a56bfba2f 100644 --- a/keyboards/abstract/ellipse/rev1/config.h +++ b/keyboards/abstract/ellipse/rev1/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/acr60/config.h b/keyboards/acr60/config.h index ab5a1932b..9b2b2a2f0 100644 --- a/keyboards/acr60/config.h +++ b/keyboards/acr60/config.h @@ -28,7 +28,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/adkb96/rev1/config.h b/keyboards/adkb96/rev1/config.h index 8bdacb4cb..cff135c26 100644 --- a/keyboards/adkb96/rev1/config.h +++ b/keyboards/adkb96/rev1/config.h @@ -22,7 +22,7 @@ along with this program. If not, see . #define DEVICE_VER 0x0001 #define MANUFACTURER Bit Trade One #define PRODUCT ADKB96 -#define DESCRIPTION +#define DESCRIPTION /* key matrix size */ // Rows are doubled-up @@ -45,7 +45,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -75,4 +75,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - diff --git a/keyboards/aeboards/aegis/config.h b/keyboards/aeboards/aegis/config.h index 787c0f485..8db31b254 100644 --- a/keyboards/aeboards/aegis/config.h +++ b/keyboards/aeboards/aegis/config.h @@ -39,7 +39,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -68,4 +68,3 @@ #define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 899 #define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 125 #define DYNAMIC_KEYMAP_MACRO_COUNT 16 - diff --git a/keyboards/ai03/lunar/config.h b/keyboards/ai03/lunar/config.h index 2fe66d4bc..a9d192554 100644 --- a/keyboards/ai03/lunar/config.h +++ b/keyboards/ai03/lunar/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -262,5 +262,5 @@ along with this program. If not, see . // DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR = DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2) #define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635 // DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE = 1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389 +#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389 #define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h index f4dc4fd63..00945ac79 100644 --- a/keyboards/ai03/orbit/config.h +++ b/keyboards/ai03/orbit/config.h @@ -89,7 +89,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/al1/config.h b/keyboards/al1/config.h index 838d56963..f4ded4346 100644 --- a/keyboards/al1/config.h +++ b/keyboards/al1/config.h @@ -51,7 +51,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/al1/matrix.c b/keyboards/al1/matrix.c index 0b7ec2c8a..f6e951087 100644 --- a/keyboards/al1/matrix.c +++ b/keyboards/al1/matrix.c @@ -7,10 +7,10 @@ #include "util.h" #include "matrix.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -69,7 +69,7 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/alf/x11/config.h b/keyboards/alf/x11/config.h index 14c97247b..587e97cd8 100644 --- a/keyboards/alf/x11/config.h +++ b/keyboards/alf/x11/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/alf/x2/config.h b/keyboards/alf/x2/config.h index 21d919983..205fa358f 100644 --- a/keyboards/alf/x2/config.h +++ b/keyboards/alf/x2/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/alpha/config.h b/keyboards/alpha/config.h index b177c8a4b..b7348bef1 100755 --- a/keyboards/alpha/config.h +++ b/keyboards/alpha/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/alu84/config.h b/keyboards/alu84/config.h index 257c22e53..130e2f1b4 100755 --- a/keyboards/alu84/config.h +++ b/keyboards/alu84/config.h @@ -46,7 +46,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/amj40/config.h b/keyboards/amj40/config.h index 4d5e4889c..f9a3c1ac6 100755 --- a/keyboards/amj40/config.h +++ b/keyboards/amj40/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h index 165f20cd4..81b70111b 100644 --- a/keyboards/amj60/config.h +++ b/keyboards/amj60/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/amj96/config.h b/keyboards/amj96/config.h index 866bcd526..1f1be03ce 100644 --- a/keyboards/amj96/config.h +++ b/keyboards/amj96/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . #define BACKLIGHT_CUSTOM /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/amjpad/config.h b/keyboards/amjpad/config.h index f568d82f0..bbb48624f 100644 --- a/keyboards/amjpad/config.h +++ b/keyboards/amjpad/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h index f278c6fdc..cca26aab3 100644 --- a/keyboards/ares/config.h +++ b/keyboards/ares/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS {} #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 @@ -48,4 +48,4 @@ along with this program. If not, see . /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 \ No newline at end of file +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/at101_blackheart/config.h b/keyboards/at101_blackheart/config.h index af4be3d71..83814c648 100644 --- a/keyboards/at101_blackheart/config.h +++ b/keyboards/at101_blackheart/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atom47/rev2/config.h b/keyboards/atom47/rev2/config.h index 7a044620b..c38cd450e 100644 --- a/keyboards/atom47/rev2/config.h +++ b/keyboards/atom47/rev2/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atom47/rev3/config.h b/keyboards/atom47/rev3/config.h index e14800b0f..5a302abff 100644 --- a/keyboards/atom47/rev3/config.h +++ b/keyboards/atom47/rev3/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Backlight configuration */ diff --git a/keyboards/atomic/config.h b/keyboards/atomic/config.h index 8af23ffeb..045f86727 100644 --- a/keyboards/atomic/config.h +++ b/keyboards/atomic/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/atomic/keymaps/pvc/config.h b/keyboards/atomic/keymaps/pvc/config.h index 50afa7688..3803a2ccd 100644 --- a/keyboards/atomic/keymaps/pvc/config.h +++ b/keyboards/atomic/keymaps/pvc/config.h @@ -37,7 +37,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/atreus/config.h b/keyboards/atreus/config.h index 18c66c4e2..b1559a29d 100644 --- a/keyboards/atreus/config.h +++ b/keyboards/atreus/config.h @@ -59,7 +59,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atreus/keymaps/alphadox/config.h b/keyboards/atreus/keymaps/alphadox/config.h index e81029a03..e998e5edc 100644 --- a/keyboards/atreus/keymaps/alphadox/config.h +++ b/keyboards/atreus/keymaps/alphadox/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atreus/keymaps/dvorak_42_key/config.h b/keyboards/atreus/keymaps/dvorak_42_key/config.h index 953178ee4..12a221d7f 100644 --- a/keyboards/atreus/keymaps/dvorak_42_key/config.h +++ b/keyboards/atreus/keymaps/dvorak_42_key/config.h @@ -71,7 +71,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atreus/keymaps/erlandsona/config.h b/keyboards/atreus/keymaps/erlandsona/config.h index 5af7e6e6c..4a7ade96a 100644 --- a/keyboards/atreus/keymaps/erlandsona/config.h +++ b/keyboards/atreus/keymaps/erlandsona/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h index 67b5f9cb2..a7fe5f354 100644 --- a/keyboards/atreus62/config.h +++ b/keyboards/atreus62/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/baguette/baguette.c b/keyboards/baguette/baguette.c index 6a8df873a..751a31725 100644 --- a/keyboards/baguette/baguette.c +++ b/keyboards/baguette/baguette.c @@ -23,7 +23,7 @@ void bootmagic_lite(void) // We need multiple scans because debouncing can't be turned off. matrix_scan(); - wait_ms(DEBOUNCING_DELAY); + wait_ms(DEBOUNCE); matrix_scan(); // If the Esc and space bar are held down on power up, diff --git a/keyboards/baguette/config.h b/keyboards/baguette/config.h index 1259d7055..9aa525cfd 100644 --- a/keyboards/baguette/config.h +++ b/keyboards/baguette/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bantam44/config.h b/keyboards/bantam44/config.h index 323852850..5b1885d83 100644 --- a/keyboards/bantam44/config.h +++ b/keyboards/bantam44/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h index 01fd4dff3..235181d09 100644 --- a/keyboards/bfake/config.h +++ b/keyboards/bfake/config.h @@ -35,7 +35,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/bigseries/1key/config.h b/keyboards/bigseries/1key/config.h index 966f2062c..66a012472 100755 --- a/keyboards/bigseries/1key/config.h +++ b/keyboards/bigseries/1key/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigseries/2key/config.h b/keyboards/bigseries/2key/config.h index 79b9ed378..535be27e7 100755 --- a/keyboards/bigseries/2key/config.h +++ b/keyboards/bigseries/2key/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigseries/3key/config.h b/keyboards/bigseries/3key/config.h index 9963a8219..faf166725 100755 --- a/keyboards/bigseries/3key/config.h +++ b/keyboards/bigseries/3key/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigseries/4key/config.h b/keyboards/bigseries/4key/config.h index a222512d3..79fdeb6ed 100755 --- a/keyboards/bigseries/4key/config.h +++ b/keyboards/bigseries/4key/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigswitch/config.h b/keyboards/bigswitch/config.h index a0ef6b555..220f2591b 100755 --- a/keyboards/bigswitch/config.h +++ b/keyboards/bigswitch/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 50 +#define DEBOUNCE 50 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/bigswitch/keymaps/wanleg/config.h b/keyboards/bigswitch/keymaps/wanleg/config.h index 0c6790618..54abb9a6c 100644 --- a/keyboards/bigswitch/keymaps/wanleg/config.h +++ b/keyboards/bigswitch/keymaps/wanleg/config.h @@ -32,8 +32,8 @@ #define BREATHING_PERIOD 5 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#undef DEBOUNCING_DELAY -#define DEBOUNCING_DELAY 5 +#undef DEBOUNCE +#define DEBOUNCE 5 // set flashing LED with QMK DFU #define QMK_LED B0 diff --git a/keyboards/blockey/config.h b/keyboards/blockey/config.h index 9bf64ef00..8934fd63a 100644 --- a/keyboards/blockey/config.h +++ b/keyboards/blockey/config.h @@ -59,7 +59,7 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bm16a/config.h b/keyboards/bm16a/config.h index c6b460a11..fc0405475 100644 --- a/keyboards/bm16a/config.h +++ b/keyboards/bm16a/config.h @@ -81,7 +81,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bm16s/config.h b/keyboards/bm16s/config.h index 568e80b39..379e59bd9 100755 --- a/keyboards/bm16s/config.h +++ b/keyboards/bm16s/config.h @@ -28,7 +28,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/boardwalk/config.h b/keyboards/boardwalk/config.h index 67352b80d..774750208 100644 --- a/keyboards/boardwalk/config.h +++ b/keyboards/boardwalk/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bpiphany/frosty_flake/config.h b/keyboards/bpiphany/frosty_flake/config.h index a797fef42..250a1b775 100644 --- a/keyboards/bpiphany/frosty_flake/config.h +++ b/keyboards/bpiphany/frosty_flake/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . #define UNUSED_PINS { B0, C4, D3 } /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bpiphany/frosty_flake/matrix.c b/keyboards/bpiphany/frosty_flake/matrix.c index 480e3455b..3c49e9c00 100644 --- a/keyboards/bpiphany/frosty_flake/matrix.c +++ b/keyboards/bpiphany/frosty_flake/matrix.c @@ -24,10 +24,10 @@ #include "util.h" #include "matrix.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -111,7 +111,7 @@ uint8_t matrix_scan(void) { bool curr_bit = col_scan & (1<. // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bpiphany/kitten_paw/matrix.c b/keyboards/bpiphany/kitten_paw/matrix.c index 6fdbfffd6..b59089cdf 100644 --- a/keyboards/bpiphany/kitten_paw/matrix.c +++ b/keyboards/bpiphany/kitten_paw/matrix.c @@ -24,10 +24,10 @@ #include "util.h" #include "matrix.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -98,7 +98,7 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/bpiphany/pegasushoof/matrix.c b/keyboards/bpiphany/pegasushoof/matrix.c index 127433875..a670d5382 100644 --- a/keyboards/bpiphany/pegasushoof/matrix.c +++ b/keyboards/bpiphany/pegasushoof/matrix.c @@ -26,7 +26,7 @@ along with this program. If not, see . #include "util.h" #include "matrix.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -90,7 +90,7 @@ uint8_t matrix_scan(void) bool curr_bit = rows & (1<. #define UNUSED_PINS { B0, C4, D3 } /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/bpiphany/tiger_lily/matrix.c b/keyboards/bpiphany/tiger_lily/matrix.c index 3b48f6b36..47a92268c 100644 --- a/keyboards/bpiphany/tiger_lily/matrix.c +++ b/keyboards/bpiphany/tiger_lily/matrix.c @@ -24,10 +24,10 @@ #include "util.h" #include "matrix.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -111,7 +111,7 @@ uint8_t matrix_scan(void) { bool curr_bit = col_scan & (1<. #define MATRIX_COLS 18 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/bpiphany/unloved_bastard/matrix.c b/keyboards/bpiphany/unloved_bastard/matrix.c index bb6de8613..328d9015c 100644 --- a/keyboards/bpiphany/unloved_bastard/matrix.c +++ b/keyboards/bpiphany/unloved_bastard/matrix.c @@ -43,10 +43,10 @@ __attribute__ ((weak)) void matrix_scan_user(void) { } -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix_debouncing[MATRIX_ROWS]; @@ -112,7 +112,7 @@ uint8_t matrix_scan(void) { bool curr_bit = col_scan & (1<. // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/butterstick/config.h b/keyboards/butterstick/config.h index 4c104deb2..90875d2ee 100644 --- a/keyboards/butterstick/config.h +++ b/keyboards/butterstick/config.h @@ -11,7 +11,7 @@ #define DESCRIPTION Its a stick of butter #define VERSION "Paula Deen" -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define FORCE_NKRO /* key matrix size */ @@ -23,4 +23,3 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - diff --git a/keyboards/canoe/config.h b/keyboards/canoe/config.h index d552fee5b..cddb749dc 100644 --- a/keyboards/canoe/config.h +++ b/keyboards/canoe/config.h @@ -35,7 +35,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/catch22/config.h b/keyboards/catch22/config.h index c5cf8233d..05c336a3f 100644 --- a/keyboards/catch22/config.h +++ b/keyboards/catch22/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -// #define DEBOUNCING_DELAY 0 +// #define DEBOUNCE 0 /* key combination for command */ #define IS_COMMAND() ( \ diff --git a/keyboards/christmas_tree/config.h b/keyboards/christmas_tree/config.h index 769a9e98b..66fccebdb 100644 --- a/keyboards/christmas_tree/config.h +++ b/keyboards/christmas_tree/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ckeys/handwire_101/config.h b/keyboards/ckeys/handwire_101/config.h index 40faec066..3dc99319e 100755 --- a/keyboards/ckeys/handwire_101/config.h +++ b/keyboards/ckeys/handwire_101/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ckeys/nakey/config.h b/keyboards/ckeys/nakey/config.h index cd8b1aa32..add3a3522 100644 --- a/keyboards/ckeys/nakey/config.h +++ b/keyboards/ckeys/nakey/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ckeys/obelus/config.h b/keyboards/ckeys/obelus/config.h index 8d3bfa3b6..4d7afc4f5 100644 --- a/keyboards/ckeys/obelus/config.h +++ b/keyboards/ckeys/obelus/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/claw44/rev1/config.h b/keyboards/claw44/rev1/config.h index ba2ed4559..f3406fee5 100644 --- a/keyboards/claw44/rev1/config.h +++ b/keyboards/claw44/rev1/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/17/config.h b/keyboards/clueboard/17/config.h index 21728348d..b7e28cbb9 100644 --- a/keyboards/clueboard/17/config.h +++ b/keyboards/clueboard/17/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Number of backlighting levels */ #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/clueboard/2x1800/config.h b/keyboards/clueboard/2x1800/config.h index 62821f766..e343011f9 100644 --- a/keyboards/clueboard/2x1800/config.h +++ b/keyboards/clueboard/2x1800/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/clueboard/66/rev1/config.h b/keyboards/clueboard/66/rev1/config.h index f8fb4bd35..9db64fbd4 100644 --- a/keyboards/clueboard/66/rev1/config.h +++ b/keyboards/clueboard/66/rev1/config.h @@ -25,7 +25,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/66/rev2/config.h b/keyboards/clueboard/66/rev2/config.h index 9227cd2df..f11cfe82f 100644 --- a/keyboards/clueboard/66/rev2/config.h +++ b/keyboards/clueboard/66/rev2/config.h @@ -24,7 +24,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/66/rev3/config.h b/keyboards/clueboard/66/rev3/config.h index ba646f157..bbbd82a1c 100644 --- a/keyboards/clueboard/66/rev3/config.h +++ b/keyboards/clueboard/66/rev3/config.h @@ -24,7 +24,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/66/rev4/config.h b/keyboards/clueboard/66/rev4/config.h index 540b38722..8ed140478 100644 --- a/keyboards/clueboard/66/rev4/config.h +++ b/keyboards/clueboard/66/rev4/config.h @@ -30,7 +30,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/66_hotswap/config.h b/keyboards/clueboard/66_hotswap/config.h index 2c265c947..b25686fa1 100644 --- a/keyboards/clueboard/66_hotswap/config.h +++ b/keyboards/clueboard/66_hotswap/config.h @@ -28,7 +28,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/clueboard/card/config.h b/keyboards/clueboard/card/config.h index 9520c31a6..9bf07f578 100644 --- a/keyboards/clueboard/card/config.h +++ b/keyboards/clueboard/card/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 20 +#define DEBOUNCE 20 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/contra/config.h b/keyboards/contra/config.h index 8e1369f12..b32d86865 100755 --- a/keyboards/contra/config.h +++ b/keyboards/contra/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/converter/hp_46010a/config.h b/keyboards/converter/hp_46010a/config.h index f77ed4115..b7297ab88 100644 --- a/keyboards/converter/hp_46010a/config.h +++ b/keyboards/converter/hp_46010a/config.h @@ -30,6 +30,4 @@ along with this program. If not, see . #define MATRIX_COLS 8 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - - +#define DEBOUNCE 5 diff --git a/keyboards/converter/hp_46010a/matrix.c b/keyboards/converter/hp_46010a/matrix.c index 2ca7d0357..ac9224087 100644 --- a/keyboards/converter/hp_46010a/matrix.c +++ b/keyboards/converter/hp_46010a/matrix.c @@ -34,18 +34,18 @@ along with this program. If not, see . #include "config.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) static uint16_t debouncing_time ; static bool debouncing = false ; #endif static uint8_t matrix [MATRIX_ROWS] = {0}; -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) static uint8_t matrix_debounce_old [MATRIX_ROWS] = {0}; static uint8_t matrix_debounce_new [MATRIX_ROWS] = {0}; #endif @@ -172,7 +172,7 @@ uint8_t matrix_scan(void) { // the first byte of the keyboard's output data can be ignored Matrix_ThrowByte(); -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) for ( uint8_t row = 0 ; row < MATRIX_ROWS ; ++row ) { //transfer old debouncing values @@ -194,8 +194,8 @@ uint8_t matrix_scan(void) { #endif -#if ( DEBOUNCING_DELAY > 0 ) - if ( debouncing && ( timer_elapsed( debouncing_time ) > DEBOUNCING_DELAY ) ) { +#if ( DEBOUNCE > 0 ) + if ( debouncing && ( timer_elapsed( debouncing_time ) > DEBOUNCE ) ) { for ( uint8_t row = 0 ; row < MATRIX_ROWS ; ++row ) { matrix[row] = matrix_debounce_new[row] ; diff --git a/keyboards/converter/ibm_5291/config.h b/keyboards/converter/ibm_5291/config.h index 5c9ca1e4a..9701bdfe9 100644 --- a/keyboards/converter/ibm_5291/config.h +++ b/keyboards/converter/ibm_5291/config.h @@ -37,6 +37,4 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 0 - - +#define DEBOUNCE 0 diff --git a/keyboards/converter/ibm_5291/matrix.c b/keyboards/converter/ibm_5291/matrix.c index 58f6e37b6..8b2dba7ab 100644 --- a/keyboards/converter/ibm_5291/matrix.c +++ b/keyboards/converter/ibm_5291/matrix.c @@ -33,8 +33,8 @@ along with this program. If not, see . #include "config.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif #define print_matrix_header() print("\nr/c 01234567\n") @@ -49,14 +49,14 @@ along with this program. If not, see . static const uint8_t row_pins [NUM_ROW_PINS] = MATRIX_ROW_PINS ; static const uint8_t col_pins [NUM_ROW_PINS] = MATRIX_COL_PINS ; -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) static uint16_t debouncing_time ; static bool debouncing = false ; #endif static uint8_t matrix [MATRIX_ROWS] = {0}; -#if ( DEBOUNCING_DELAY > 0 ) +#if ( DEBOUNCE > 0 ) static uint8_t matrix_debounce [MATRIX_ROWS] = {0}; #endif @@ -237,7 +237,7 @@ void matrix_init(void) { // initialize matrix state: all keys off for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = 0; -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) matrix_debounce [i] = 0; # endif } @@ -247,7 +247,7 @@ void matrix_init(void) { uint8_t matrix_scan(void) { for ( uint8_t current_row = 0; current_row < MATRIX_ROWS; ++current_row ) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = matrix_read(matrix_debounce, current_row); if (matrix_changed) { @@ -260,8 +260,8 @@ uint8_t matrix_scan(void) { # endif } -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debounce[i]; } diff --git a/keyboards/converter/modelm101/config.h b/keyboards/converter/modelm101/config.h index 97b78614c..958b29b74 100644 --- a/keyboards/converter/modelm101/config.h +++ b/keyboards/converter/modelm101/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* * Magic Key Options @@ -120,4 +120,4 @@ along with this program. If not, see . //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION \ No newline at end of file +//#define NO_ACTION_FUNCTION diff --git a/keyboards/converter/numeric_keypad_IIe/config.h b/keyboards/converter/numeric_keypad_IIe/config.h index 8cf0eaa40..a129e1210 100644 --- a/keyboards/converter/numeric_keypad_IIe/config.h +++ b/keyboards/converter/numeric_keypad_IIe/config.h @@ -52,10 +52,10 @@ Header Pins Header / Matrix --------------- -Pin Name Description +Pin Name Description -------------------------------------------------------------- 1,2,5,3,4,6 Y0-Y5 Y-direction key-matrix connections -7 NC +7 NC 9,11,10,8 X4-X7 X-direction key-matrix connections @@ -98,4 +98,4 @@ http://wiki.apple2.org/index.php?title=Pinouts#Apple_.2F.2Fe_Numeric_Keypad_conn #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW #define SOFT_SERIAL_PIN D0 -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 diff --git a/keyboards/coseyfannitutti/mullet/config.h b/keyboards/coseyfannitutti/mullet/config.h index 527294e51..2025cb433 100644 --- a/keyboards/coseyfannitutti/mullet/config.h +++ b/keyboards/coseyfannitutti/mullet/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -169,4 +169,3 @@ along with this program. If not, see . #define LCD_E_PIN 1 //< pin for Enable line #endif */ - diff --git a/keyboards/coseyfannitutti/mulletpad/config.h b/keyboards/coseyfannitutti/mulletpad/config.h index ad5941055..2174d6492 100644 --- a/keyboards/coseyfannitutti/mulletpad/config.h +++ b/keyboards/coseyfannitutti/mulletpad/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . //#endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -169,4 +169,3 @@ along with this program. If not, see . #define LCD_E_PIN 1 //< pin for Enable line #endif */ - diff --git a/keyboards/cospad/config.h b/keyboards/cospad/config.h index b7e7ec384..9844f2724 100644 --- a/keyboards/cospad/config.h +++ b/keyboards/cospad/config.h @@ -58,7 +58,7 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/crawlpad/config.h b/keyboards/crawlpad/config.h index a6d7ac214..d51ad1744 100755 --- a/keyboards/crawlpad/config.h +++ b/keyboards/crawlpad/config.h @@ -26,7 +26,7 @@ #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -44,4 +44,3 @@ #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 3 #endif - diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h index 6564c8503..4ea8ff38c 100644 --- a/keyboards/crkbd/rev1/config.h +++ b/keyboards/crkbd/rev1/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/cu24/config.h b/keyboards/cu24/config.h index 1de9d33cb..7bb49816b 100644 --- a/keyboards/cu24/config.h +++ b/keyboards/cu24/config.h @@ -47,7 +47,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + /* Backlight */ #define BACKLIGHT_PIN B5 #define BACKLIGHT_BREATHING @@ -59,7 +59,7 @@ #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/cu75/config.h b/keyboards/cu75/config.h index baaed33e6..e01f947a0 100644 --- a/keyboards/cu75/config.h +++ b/keyboards/cu75/config.h @@ -42,7 +42,7 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 17 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/daisy/config.h b/keyboards/daisy/config.h index f397d28da..567a215a6 100644 --- a/keyboards/daisy/config.h +++ b/keyboards/daisy/config.h @@ -31,12 +31,12 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - + #define BACKLIGHT_PIN D0 #define BACKLIGHT_LEVELS 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/arrow/config.h b/keyboards/dc01/arrow/config.h index e58967ac0..801dbb54d 100644 --- a/keyboards/dc01/arrow/config.h +++ b/keyboards/dc01/arrow/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/arrow/matrix.c b/keyboards/dc01/arrow/matrix.c index dd5e2ee9c..1823138c3 100644 --- a/keyboards/dc01/arrow/matrix.c +++ b/keyboards/dc01/arrow/matrix.c @@ -36,11 +36,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -155,7 +155,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -173,7 +173,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -187,8 +187,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -209,7 +209,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/dc01/left/config.h b/keyboards/dc01/left/config.h index 3f5137312..26ad41a05 100644 --- a/keyboards/dc01/left/config.h +++ b/keyboards/dc01/left/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c index a3db220e4..0e7b591f8 100644 --- a/keyboards/dc01/left/matrix.c +++ b/keyboards/dc01/left/matrix.c @@ -42,11 +42,11 @@ static uint8_t error_count_arrow = 0; /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -169,7 +169,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -187,7 +187,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -201,8 +201,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -249,7 +249,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/dc01/numpad/config.h b/keyboards/dc01/numpad/config.h index a8a244554..2e91cfdd9 100644 --- a/keyboards/dc01/numpad/config.h +++ b/keyboards/dc01/numpad/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/numpad/matrix.c b/keyboards/dc01/numpad/matrix.c index 5a13f3ff2..f8b725adc 100644 --- a/keyboards/dc01/numpad/matrix.c +++ b/keyboards/dc01/numpad/matrix.c @@ -36,11 +36,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -155,7 +155,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -173,7 +173,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -187,8 +187,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -209,7 +209,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/dc01/right/config.h b/keyboards/dc01/right/config.h index 4933f5829..bbffb7814 100644 --- a/keyboards/dc01/right/config.h +++ b/keyboards/dc01/right/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dc01/right/matrix.c b/keyboards/dc01/right/matrix.c index 6d981797c..6ec3a3b72 100644 --- a/keyboards/dc01/right/matrix.c +++ b/keyboards/dc01/right/matrix.c @@ -36,11 +36,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -155,7 +155,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -173,7 +173,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -187,8 +187,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -209,7 +209,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/deltasplit75/matrix.c b/keyboards/deltasplit75/matrix.c index 1ac5c5039..28198d89b 100644 --- a/keyboards/deltasplit75/matrix.c +++ b/keyboards/deltasplit75/matrix.c @@ -37,11 +37,11 @@ along with this program. If not, see . # include "serial.h" #endif -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -140,7 +140,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -157,7 +157,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -170,8 +170,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/deltasplit75/v2/config.h b/keyboards/deltasplit75/v2/config.h index fc85f9125..6a2e48f4f 100644 --- a/keyboards/deltasplit75/v2/config.h +++ b/keyboards/deltasplit75/v2/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/diverge3/config.h b/keyboards/diverge3/config.h index aa9f52fcb..a593bca9d 100644 --- a/keyboards/diverge3/config.h +++ b/keyboards/diverge3/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 5 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/divergetm2/config.h b/keyboards/divergetm2/config.h index 2cdc315de..8ad948676 100644 --- a/keyboards/divergetm2/config.h +++ b/keyboards/divergetm2/config.h @@ -49,7 +49,7 @@ #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ diff --git a/keyboards/dk60/config.h b/keyboards/dk60/config.h index 9df384740..6a69516cb 100644 --- a/keyboards/dk60/config.h +++ b/keyboards/dk60/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ - #define DEBOUNCING_DELAY 5 + #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/do60/config.h b/keyboards/do60/config.h index 74d27de39..82e818328 100644 --- a/keyboards/do60/config.h +++ b/keyboards/do60/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* RGB Underglow * F5 PIN for DO60's pre-soldered WS2812 LEDs diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h index 74661d828..75aacb4d4 100644 --- a/keyboards/donutcables/budget96/config.h +++ b/keyboards/donutcables/budget96/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/donutcables/scrabblepad/config.h b/keyboards/donutcables/scrabblepad/config.h index bf3d3db72..d6490349e 100644 --- a/keyboards/donutcables/scrabblepad/config.h +++ b/keyboards/donutcables/scrabblepad/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . //#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/doro67/rgb/config.h b/keyboards/doro67/rgb/config.h index 87a30e084..16dc4fc0a 100644 --- a/keyboards/doro67/rgb/config.h +++ b/keyboards/doro67/rgb/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // The number of LEDs connected #define DRIVER_LED_TOTAL 67 -#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_KEYPRESSES /* * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. @@ -63,7 +63,7 @@ along with this program. If not, see . #define RGBLED_NUM 67 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/dozen0/config.h b/keyboards/dozen0/config.h index 6b0f8525a..9ea2c1795 100644 --- a/keyboards/dozen0/config.h +++ b/keyboards/dozen0/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/duck/eagle_viper/v2/config.h b/keyboards/duck/eagle_viper/v2/config.h index a0ce866cc..e328b1ee2 100644 --- a/keyboards/duck/eagle_viper/v2/config.h +++ b/keyboards/duck/eagle_viper/v2/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 3 @@ -48,4 +48,3 @@ along with this program. If not, see . #define BOOTMAGIC_LITE_COLUMN 10 #define TAPPING_TERM 200 - diff --git a/keyboards/duck/eagle_viper/v2/matrix.c b/keyboards/duck/eagle_viper/v2/matrix.c index b705ae49f..0964493ac 100644 --- a/keyboards/duck/eagle_viper/v2/matrix.c +++ b/keyboards/duck/eagle_viper/v2/matrix.c @@ -22,7 +22,7 @@ along with this program. If not, see . #include "print.h" #include "debug.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -92,7 +92,7 @@ uint8_t matrix_scan(void) { if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/duck/jetfire/config.h b/keyboards/duck/jetfire/config.h index 774e28491..f616bc238 100644 --- a/keyboards/duck/jetfire/config.h +++ b/keyboards/duck/jetfire/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Set to top left most key */ #define BOOTMAGIC_LITE_ROW 5 diff --git a/keyboards/duck/jetfire/matrix.c b/keyboards/duck/jetfire/matrix.c index 51202aeb6..2dd94a72a 100644 --- a/keyboards/duck/jetfire/matrix.c +++ b/keyboards/duck/jetfire/matrix.c @@ -21,7 +21,7 @@ along with this program. If not, see . #include "util.h" #include "matrix.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -97,7 +97,7 @@ uint8_t matrix_scan(void) if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/duck/lightsaver/config.h b/keyboards/duck/lightsaver/config.h index d302fb395..5bb4e6faf 100644 --- a/keyboards/duck/lightsaver/config.h +++ b/keyboards/duck/lightsaver/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 1 @@ -48,4 +48,3 @@ along with this program. If not, see . #define BOOTMAGIC_LITE_COLUMN 10 #define TAPPING_TERM 200 - diff --git a/keyboards/duck/lightsaver/matrix.c b/keyboards/duck/lightsaver/matrix.c index 543205c0b..066452724 100644 --- a/keyboards/duck/lightsaver/matrix.c +++ b/keyboards/duck/lightsaver/matrix.c @@ -22,7 +22,7 @@ along with this program. If not, see . #include "print.h" #include "debug.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -90,7 +90,7 @@ uint8_t matrix_scan(void) { if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/duck/octagon/v1/config.h b/keyboards/duck/octagon/v1/config.h index d818cb622..45e87de4b 100644 --- a/keyboards/duck/octagon/v1/config.h +++ b/keyboards/duck/octagon/v1/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/duck/octagon/v1/matrix.c b/keyboards/duck/octagon/v1/matrix.c index 233404ed3..a2bea865b 100644 --- a/keyboards/duck/octagon/v1/matrix.c +++ b/keyboards/duck/octagon/v1/matrix.c @@ -22,7 +22,7 @@ along with this program. If not, see . #include "print.h" #include "debug.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -87,7 +87,7 @@ uint8_t matrix_scan(void) { if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/duck/octagon/v2/config.h b/keyboards/duck/octagon/v2/config.h index 4aab587f6..82b0c8a99 100644 --- a/keyboards/duck/octagon/v2/config.h +++ b/keyboards/duck/octagon/v2/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 1 @@ -48,4 +48,3 @@ along with this program. If not, see . #define BOOTMAGIC_LITE_COLUMN 10 #define TAPPING_TERM 200 - diff --git a/keyboards/duck/octagon/v2/matrix.c b/keyboards/duck/octagon/v2/matrix.c index e6e7046b4..25d1e45b0 100644 --- a/keyboards/duck/octagon/v2/matrix.c +++ b/keyboards/duck/octagon/v2/matrix.c @@ -22,7 +22,7 @@ along with this program. If not, see . #include "print.h" #include "debug.h" -static uint8_t debouncing = DEBOUNCING_DELAY; +static uint8_t debouncing = DEBOUNCE; /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; @@ -92,7 +92,7 @@ uint8_t matrix_scan(void) { if (debouncing) { dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); } - debouncing = DEBOUNCING_DELAY; + debouncing = DEBOUNCE; } } unselect_cols(); diff --git a/keyboards/dz60/config.h b/keyboards/dz60/config.h index 46702adcd..8d66c3584 100644 --- a/keyboards/dz60/config.h +++ b/keyboards/dz60/config.h @@ -28,7 +28,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/dz60/keymaps/LEdiodes/config.h b/keyboards/dz60/keymaps/LEdiodes/config.h index 6cdc4a91e..196d05c53 100644 --- a/keyboards/dz60/keymaps/LEdiodes/config.h +++ b/keyboards/dz60/keymaps/LEdiodes/config.h @@ -28,7 +28,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h index f5820eafc..a6ae1821a 100644 --- a/keyboards/eco/config.h +++ b/keyboards/eco/config.h @@ -38,7 +38,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ep/40/config.h b/keyboards/ep/40/config.h index b7f99a3b7..c954882b8 100644 --- a/keyboards/ep/40/config.h +++ b/keyboards/ep/40/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ep/96/config.h b/keyboards/ep/96/config.h index 152b04b62..22d406fd5 100644 --- a/keyboards/ep/96/config.h +++ b/keyboards/ep/96/config.h @@ -51,7 +51,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ergo42/matrix.c b/keyboards/ergo42/matrix.c index fc42dd14d..328d16c77 100644 --- a/keyboards/ergo42/matrix.c +++ b/keyboards/ergo42/matrix.c @@ -37,11 +37,11 @@ along with this program. If not, see . # include "serial.h" #endif -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -145,7 +145,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -162,7 +162,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -175,8 +175,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/ergo42/rev1/config.h b/keyboards/ergo42/rev1/config.h index f9d909cc7..68a5e2bbe 100644 --- a/keyboards/ergo42/rev1/config.h +++ b/keyboards/ergo42/rev1/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ergodash/mini/config.h b/keyboards/ergodash/mini/config.h index cac1bba6f..2fa51dcc1 100644 --- a/keyboards/ergodash/mini/config.h +++ b/keyboards/ergodash/mini/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ergodash/rev1/config.h b/keyboards/ergodash/rev1/config.h index 5b7d85688..52f81e4ac 100644 --- a/keyboards/ergodash/rev1/config.h +++ b/keyboards/ergodash/rev1/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ergoinu/config.h b/keyboards/ergoinu/config.h index a59e5da74..dfc8a5293 100644 --- a/keyboards/ergoinu/config.h +++ b/keyboards/ergoinu/config.h @@ -57,7 +57,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ergotravel/rev1/config.h b/keyboards/ergotravel/rev1/config.h index 1d8a60afd..89045666b 100644 --- a/keyboards/ergotravel/rev1/config.h +++ b/keyboards/ergotravel/rev1/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/espectro/config.h b/keyboards/espectro/config.h index 438530c41..2736c1d88 100755 --- a/keyboards/espectro/config.h +++ b/keyboards/espectro/config.h @@ -43,7 +43,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/evil80/config.h b/keyboards/evil80/config.h index 6bb286146..ae507c74f 100644 --- a/keyboards/evil80/config.h +++ b/keyboards/evil80/config.h @@ -32,7 +32,7 @@ #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/exclusive/e6v2/le/config.h b/keyboards/exclusive/e6v2/le/config.h index 580929ba8..6477d5364 100644 --- a/keyboards/exclusive/e6v2/le/config.h +++ b/keyboards/exclusive/e6v2/le/config.h @@ -54,6 +54,6 @@ along with this program. If not, see . #endif #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/exclusive/e6v2/oe/config.h b/keyboards/exclusive/e6v2/oe/config.h index 0bb89eba6..9206916d3 100644 --- a/keyboards/exclusive/e6v2/oe/config.h +++ b/keyboards/exclusive/e6v2/oe/config.h @@ -54,6 +54,6 @@ along with this program. If not, see . #endif #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/exclusive/e7v1/config.h b/keyboards/exclusive/e7v1/config.h index eacb3ba31..689d7e862 100644 --- a/keyboards/exclusive/e7v1/config.h +++ b/keyboards/exclusive/e7v1/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h index b4fb0d4cd..239783f8b 100644 --- a/keyboards/facew/config.h +++ b/keyboards/facew/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/fc660c/config.h b/keyboards/fc660c/config.h index fe9c69517..e55896e6c 100644 --- a/keyboards/fc660c/config.h +++ b/keyboards/fc660c/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . // #define BACKLIGHT_PIN B7 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 #define TAPPING_TERM 175 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/fc980c/config.h b/keyboards/fc980c/config.h index b46bdfd55..f9d3e06d6 100644 --- a/keyboards/fc980c/config.h +++ b/keyboards/fc980c/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . // #define BACKLIGHT_PIN B7 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 #define TAPPING_TERM 175 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/felix/config.h b/keyboards/felix/config.h index 0e5dd9d2d..0dd8eea07 100644 --- a/keyboards/felix/config.h +++ b/keyboards/felix/config.h @@ -29,7 +29,7 @@ #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/fleuron/config.h b/keyboards/fleuron/config.h index 8e1d27436..0236bc3b6 100644 --- a/keyboards/fleuron/config.h +++ b/keyboards/fleuron/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/fortitude60/matrix.c b/keyboards/fortitude60/matrix.c index 565f417d8..9037d53a6 100644 --- a/keyboards/fortitude60/matrix.c +++ b/keyboards/fortitude60/matrix.c @@ -38,11 +38,11 @@ extern backlight_config_t backlight_config; #include "serial.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -144,7 +144,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -161,7 +161,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -174,8 +174,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/fortitude60/rev1/config.h b/keyboards/fortitude60/rev1/config.h index 2fa179ae2..ad4407a11 100644 --- a/keyboards/fortitude60/rev1/config.h +++ b/keyboards/fortitude60/rev1/config.h @@ -51,7 +51,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/four_banger/config.h b/keyboards/four_banger/config.h index 4567cec8e..8e0738e6d 100644 --- a/keyboards/four_banger/config.h +++ b/keyboards/four_banger/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/foxlab/leaf60/hotswap/config.h b/keyboards/foxlab/leaf60/hotswap/config.h index a471ea8e5..752b403c5 100644 --- a/keyboards/foxlab/leaf60/hotswap/config.h +++ b/keyboards/foxlab/leaf60/hotswap/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/foxlab/leaf60/universal/config.h b/keyboards/foxlab/leaf60/universal/config.h index d8d66ee38..f038430f9 100644 --- a/keyboards/foxlab/leaf60/universal/config.h +++ b/keyboards/foxlab/leaf60/universal/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/fractal/config.h b/keyboards/fractal/config.h index fce0931c2..f67f61c13 100755 --- a/keyboards/fractal/config.h +++ b/keyboards/fractal/config.h @@ -31,7 +31,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ft/mars80/config.h b/keyboards/ft/mars80/config.h index e03d1b399..b56adb114 100644 --- a/keyboards/ft/mars80/config.h +++ b/keyboards/ft/mars80/config.h @@ -36,7 +36,7 @@ along with this program. If not, see . #define UNUSED_PINS {} #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 @@ -47,4 +47,3 @@ along with this program. If not, see . /* key combination for magic key command */ /* defined by default; to change, uncomment and set to the combination you want */ // #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - diff --git a/keyboards/gh60/config.h b/keyboards/gh60/config.h index a99dd4e59..8b7391faf 100644 --- a/keyboards/gh60/config.h +++ b/keyboards/gh60/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gh60/keymaps/dbroqua/config.h b/keyboards/gh60/keymaps/dbroqua/config.h index 380b8303f..8952200e0 100644 --- a/keyboards/gh60/keymaps/dbroqua/config.h +++ b/keyboards/gh60/keymaps/dbroqua/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h index ec2f8ceea..1cc41d183 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/config.h +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gh80_3000/config.h b/keyboards/gh80_3000/config.h index 7fb418312..edcacc20e 100644 --- a/keyboards/gh80_3000/config.h +++ b/keyboards/gh80_3000/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/gonnerd/config.h b/keyboards/gonnerd/config.h index 40615da5f..5b22495db 100644 --- a/keyboards/gonnerd/config.h +++ b/keyboards/gonnerd/config.h @@ -28,7 +28,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/gray_studio/cod67/config.h b/keyboards/gray_studio/cod67/config.h index b72f47143..47b42d8a6 100644 --- a/keyboards/gray_studio/cod67/config.h +++ b/keyboards/gray_studio/cod67/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gray_studio/space65/config.h b/keyboards/gray_studio/space65/config.h index e6d9f235d..979cb0a60 100644 --- a/keyboards/gray_studio/space65/config.h +++ b/keyboards/gray_studio/space65/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/gskt00/config.h b/keyboards/gskt00/config.h index 376f89dbe..7e1107d31 100755 --- a/keyboards/gskt00/config.h +++ b/keyboards/gskt00/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/hadron/config.h b/keyboards/hadron/config.h index 7024f8fcb..61e764748 100644 --- a/keyboards/hadron/config.h +++ b/keyboards/hadron/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/halberd/config.h b/keyboards/halberd/config.h index ab46c4d8a..32930d778 100644 --- a/keyboards/halberd/config.h +++ b/keyboards/halberd/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -228,5 +228,3 @@ along with this program. If not, see . // #define BOOTMAGIC_LITE_COLUMN 0 #define TAPPING_TERM 100 - - diff --git a/keyboards/handwired/108key_trackpoint/config.h b/keyboards/handwired/108key_trackpoint/config.h index a773a72b1..2c0662c0b 100644 --- a/keyboards/handwired/108key_trackpoint/config.h +++ b/keyboards/handwired/108key_trackpoint/config.h @@ -61,7 +61,7 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/412_64/config.h b/keyboards/handwired/412_64/config.h index 9cdb3fac8..cce38f3e6 100644 --- a/keyboards/handwired/412_64/config.h +++ b/keyboards/handwired/412_64/config.h @@ -38,7 +38,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/arrow_pad/config.h b/keyboards/handwired/arrow_pad/config.h index 1ae3d21c4..abb600c51 100644 --- a/keyboards/handwired/arrow_pad/config.h +++ b/keyboards/handwired/arrow_pad/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h b/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h index 9b6ecfaa3..0e471527d 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h +++ b/keyboards/handwired/arrow_pad/keymaps/pad_21/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h b/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h index db89e4b84..aba085f3d 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h +++ b/keyboards/handwired/arrow_pad/keymaps/pad_24/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h index 4cdc7ed12..0d51e1185 100644 --- a/keyboards/handwired/atreus50/config.h +++ b/keyboards/handwired/atreus50/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/cmd60/config.h b/keyboards/handwired/cmd60/config.h index e95cac1e4..ee676ca05 100644 --- a/keyboards/handwired/cmd60/config.h +++ b/keyboards/handwired/cmd60/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c index f63cf1188..73423bfbd 100644 --- a/keyboards/handwired/dactyl/matrix.c +++ b/keyboards/handwired/dactyl/matrix.c @@ -31,11 +31,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -256,7 +256,7 @@ uint8_t matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -270,7 +270,7 @@ uint8_t matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { @@ -284,8 +284,8 @@ uint8_t matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -299,7 +299,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) // deprecated and evidently not called. { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h index 5e7605d3a..6979821b6 100644 --- a/keyboards/handwired/dactyl_manuform/config.h +++ b/keyboards/handwired/dactyl_manuform/config.h @@ -36,7 +36,7 @@ along with this program. If not, see . #define MOUSEKEY_WHEEL_DELAY 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/handwired/dactyl_promicro/config.h b/keyboards/handwired/dactyl_promicro/config.h index f81b3de51..3c0b541d1 100644 --- a/keyboards/handwired/dactyl_promicro/config.h +++ b/keyboards/handwired/dactyl_promicro/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . #define MOUSEKEY_WHEEL_DELAY 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/handwired/daishi/config.h b/keyboards/handwired/daishi/config.h index 020b486a9..15ff6a6a6 100644 --- a/keyboards/handwired/daishi/config.h +++ b/keyboards/handwired/daishi/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Set up rotary encoder */ #define NUMBER_OF_ENCODERS 1 diff --git a/keyboards/handwired/datahand/config.h b/keyboards/handwired/datahand/config.h index a269775f3..c7a0a43de 100644 --- a/keyboards/handwired/datahand/config.h +++ b/keyboards/handwired/datahand/config.h @@ -33,7 +33,7 @@ //#define DIODE_DIRECTION /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/downbubble/config.h b/keyboards/handwired/downbubble/config.h index 4b2bd92e4..f2628cb70 100644 --- a/keyboards/handwired/downbubble/config.h +++ b/keyboards/handwired/downbubble/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/fivethirteen/config.h b/keyboards/handwired/fivethirteen/config.h index 685d421b1..951122297 100644 --- a/keyboards/handwired/fivethirteen/config.h +++ b/keyboards/handwired/fivethirteen/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/gamenum/config.h b/keyboards/handwired/gamenum/config.h index 180b1b01a..ff60aa529 100644 --- a/keyboards/handwired/gamenum/config.h +++ b/keyboards/handwired/gamenum/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h index 59300e0d2..1a341c0f4 100644 --- a/keyboards/handwired/hacked_motospeed/config.h +++ b/keyboards/handwired/hacked_motospeed/config.h @@ -84,7 +84,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ #define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/hexon38/config.h b/keyboards/handwired/hexon38/config.h index 5453eda54..e9e1eb4d2 100644 --- a/keyboards/handwired/hexon38/config.h +++ b/keyboards/handwired/hexon38/config.h @@ -31,7 +31,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/handwired/ibm122m/config.h b/keyboards/handwired/ibm122m/config.h index 1ef7be78d..8189f704d 100644 --- a/keyboards/handwired/ibm122m/config.h +++ b/keyboards/handwired/ibm122m/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 15 +#define DEBOUNCE 15 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/jn68m/config.h b/keyboards/handwired/jn68m/config.h index f6ab4056b..ef0c09cf1 100644 --- a/keyboards/handwired/jn68m/config.h +++ b/keyboards/handwired/jn68m/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jot50/config.h b/keyboards/handwired/jot50/config.h index 2dfcfd2d2..2d2c1c183 100644 --- a/keyboards/handwired/jot50/config.h +++ b/keyboards/handwired/jot50/config.h @@ -29,7 +29,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jotanck/config.h b/keyboards/handwired/jotanck/config.h index cbbd6ea96..925464825 100644 --- a/keyboards/handwired/jotanck/config.h +++ b/keyboards/handwired/jotanck/config.h @@ -28,7 +28,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/jotpad16/config.h b/keyboards/handwired/jotpad16/config.h index e113597dc..075f9649c 100644 --- a/keyboards/handwired/jotpad16/config.h +++ b/keyboards/handwired/jotpad16/config.h @@ -28,11 +28,10 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h index 5f02c7172..f0bba68a5 100644 --- a/keyboards/handwired/kbod/config.h +++ b/keyboards/handwired/kbod/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/maartenwut/config.h b/keyboards/handwired/maartenwut/config.h index b939fa1f6..d059c6e4a 100755 --- a/keyboards/handwired/maartenwut/config.h +++ b/keyboards/handwired/maartenwut/config.h @@ -32,7 +32,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define QMK_ESC_OUTPUT C6 // usually COL #define QMK_ESC_INPUT D0 // usually ROW diff --git a/keyboards/handwired/magicforce61/config.h b/keyboards/handwired/magicforce61/config.h index 3dc74f83e..446f4aefc 100644 --- a/keyboards/handwired/magicforce61/config.h +++ b/keyboards/handwired/magicforce61/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h index dc0a82c94..1cb7e91b4 100644 --- a/keyboards/handwired/magicforce68/config.h +++ b/keyboards/handwired/magicforce68/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/mechboards_micropad/config.h b/keyboards/handwired/mechboards_micropad/config.h index 01a0bdd90..8f237a64a 100644 --- a/keyboards/handwired/mechboards_micropad/config.h +++ b/keyboards/handwired/mechboards_micropad/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/minorca/config.h b/keyboards/handwired/minorca/config.h index c30d54db7..fea201b9c 100644 --- a/keyboards/handwired/minorca/config.h +++ b/keyboards/handwired/minorca/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/ms_sculpt_mobile/config.h b/keyboards/handwired/ms_sculpt_mobile/config.h index 6739b44fc..0b1d3e6b3 100644 --- a/keyboards/handwired/ms_sculpt_mobile/config.h +++ b/keyboards/handwired/ms_sculpt_mobile/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/not_so_minidox/config.h b/keyboards/handwired/not_so_minidox/config.h index fc6068628..e92621af4 100644 --- a/keyboards/handwired/not_so_minidox/config.h +++ b/keyboards/handwired/not_so_minidox/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/numbrero/config.h b/keyboards/handwired/numbrero/config.h index bb178bd22..ac38e0814 100644 --- a/keyboards/handwired/numbrero/config.h +++ b/keyboards/handwired/numbrero/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/numpad20/config.h b/keyboards/handwired/numpad20/config.h index c597494c4..78d95965a 100644 --- a/keyboards/handwired/numpad20/config.h +++ b/keyboards/handwired/numpad20/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/ortho5x13/config.h b/keyboards/handwired/ortho5x13/config.h index 1e2128b65..b3850a48a 100644 --- a/keyboards/handwired/ortho5x13/config.h +++ b/keyboards/handwired/ortho5x13/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h index 8f562de3b..439686ae6 100644 --- a/keyboards/handwired/pilcrow/config.h +++ b/keyboards/handwired/pilcrow/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/prime_exl/config.h b/keyboards/handwired/prime_exl/config.h index 3201a8247..a2962c074 100644 --- a/keyboards/handwired/prime_exl/config.h +++ b/keyboards/handwired/prime_exl/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 5 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index b5a0a7f4b..f05273d25 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/promethium/matrix.c b/keyboards/handwired/promethium/matrix.c index 0b4456e28..3b8e5af82 100644 --- a/keyboards/handwired/promethium/matrix.c +++ b/keyboards/handwired/promethium/matrix.c @@ -31,11 +31,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -128,7 +128,7 @@ uint8_t matrix_scan(void) { // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -142,8 +142,8 @@ uint8_t matrix_scan(void) } -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -157,7 +157,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; @@ -294,4 +294,3 @@ static void unselect_row(uint8_t row) static void unselect_rows(void) { } - diff --git a/keyboards/handwired/pteron/config.h b/keyboards/handwired/pteron/config.h index d0b074c68..56921b020 100644 --- a/keyboards/handwired/pteron/config.h +++ b/keyboards/handwired/pteron/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 // 5 is default +#define DEBOUNCE 5 // 5 is default /* prevent stuck modifiers */ #define PREVENT_STUCK_MODIFIERS diff --git a/keyboards/handwired/qc60/config.h b/keyboards/handwired/qc60/config.h index aad1d64a0..0c8f8f007 100644 --- a/keyboards/handwired/qc60/config.h +++ b/keyboards/handwired/qc60/config.h @@ -16,7 +16,7 @@ #define MATRIX_COLS 8 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/handwired/reddot/config.h b/keyboards/handwired/reddot/config.h index 82fe01863..4d908041b 100755 --- a/keyboards/handwired/reddot/config.h +++ b/keyboards/handwired/reddot/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/retro_refit/config.h b/keyboards/handwired/retro_refit/config.h index 34def3815..1d4f1e075 100644 --- a/keyboards/handwired/retro_refit/config.h +++ b/keyboards/handwired/retro_refit/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/space_oddity/config.h b/keyboards/handwired/space_oddity/config.h index 832216423..09975cfc8 100644 --- a/keyboards/handwired/space_oddity/config.h +++ b/keyboards/handwired/space_oddity/config.h @@ -35,7 +35,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/splittest/config.h b/keyboards/handwired/splittest/config.h index 9e4fb38ca..a502d1238 100644 --- a/keyboards/handwired/splittest/config.h +++ b/keyboards/handwired/splittest/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h index b50886cdc..20795b048 100644 --- a/keyboards/handwired/tennie/config.h +++ b/keyboards/handwired/tennie/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/terminus_mini/config.h b/keyboards/handwired/terminus_mini/config.h index e1b5daccd..a5a6736ba 100644 --- a/keyboards/handwired/terminus_mini/config.h +++ b/keyboards/handwired/terminus_mini/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . #define TAPPING_TERM 150 //reduce time required to register a held key /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/trackpoint/config.h b/keyboards/handwired/trackpoint/config.h index cecb6a509..a1c12efb0 100644 --- a/keyboards/handwired/trackpoint/config.h +++ b/keyboards/handwired/trackpoint/config.h @@ -61,7 +61,7 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/tradestation/config.h b/keyboards/handwired/tradestation/config.h index 22650d2f1..33c87548f 100644 --- a/keyboards/handwired/tradestation/config.h +++ b/keyboards/handwired/tradestation/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/handwired/traveller/config.h b/keyboards/handwired/traveller/config.h index ccf214736..3812ec61f 100644 --- a/keyboards/handwired/traveller/config.h +++ b/keyboards/handwired/traveller/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/woodpad/config.h b/keyboards/handwired/woodpad/config.h index 77be4a0d9..d08c47387 100644 --- a/keyboards/handwired/woodpad/config.h +++ b/keyboards/handwired/woodpad/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/handwired/xealous/rev1/config.h b/keyboards/handwired/xealous/rev1/config.h index f58c8f90b..ab39dfbc1 100644 --- a/keyboards/handwired/xealous/rev1/config.h +++ b/keyboards/handwired/xealous/rev1/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* * Feature disable options diff --git a/keyboards/hecomi/alpha/config.h b/keyboards/hecomi/alpha/config.h index 8a65f146b..dbc94454f 100644 --- a/keyboards/hecomi/alpha/config.h +++ b/keyboards/hecomi/alpha/config.h @@ -79,7 +79,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/helix/pico/config.h b/keyboards/helix/pico/config.h index 343cecd59..b377332ef 100644 --- a/keyboards/helix/pico/config.h +++ b/keyboards/helix/pico/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/helix/rev1/config.h b/keyboards/helix/rev1/config.h index 22e61acc7..454e8ee62 100644 --- a/keyboards/helix/rev1/config.h +++ b/keyboards/helix/rev1/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/helix/rev2/config.h b/keyboards/helix/rev2/config.h index 2dc2fb8dd..ec7445859 100644 --- a/keyboards/helix/rev2/config.h +++ b/keyboards/helix/rev2/config.h @@ -72,7 +72,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/hid_liber/config.h b/keyboards/hid_liber/config.h index 4519d8628..c21307e1a 100755 --- a/keyboards/hid_liber/config.h +++ b/keyboards/hid_liber/config.h @@ -45,7 +45,7 @@ //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/hifumi/config.h b/keyboards/hifumi/config.h index dccb0352d..b4f192a7a 100644 --- a/keyboards/hifumi/config.h +++ b/keyboards/hifumi/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* ws2812 RGB LED */ #define RGB_DI_PIN D3 diff --git a/keyboards/hineybush/h87a/config.h b/keyboards/hineybush/h87a/config.h index 2e6c37e33..245e6eda8 100644 --- a/keyboards/hineybush/h87a/config.h +++ b/keyboards/hineybush/h87a/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/hineybush/hineyg80/config.h b/keyboards/hineybush/hineyg80/config.h index 7e75c62b3..4072def2f 100644 --- a/keyboards/hineybush/hineyg80/config.h +++ b/keyboards/hineybush/hineyg80/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -44,4 +44,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - diff --git a/keyboards/hs60/v1/config.h b/keyboards/hs60/v1/config.h index ee546f3f1..762ab319f 100644 --- a/keyboards/hs60/v1/config.h +++ b/keyboards/hs60/v1/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/hs60/v1/v1.c b/keyboards/hs60/v1/v1.c index 5267c9457..70c1c2128 100644 --- a/keyboards/hs60/v1/v1.c +++ b/keyboards/hs60/v1/v1.c @@ -315,7 +315,7 @@ void bootmagic_lite(void) // We need multiple scans because debouncing can't be turned off. matrix_scan(); - wait_ms(DEBOUNCING_DELAY); + wait_ms(DEBOUNCE); matrix_scan(); // If the Esc and space bar are held down on power up, diff --git a/keyboards/hs60/v2/config.h b/keyboards/hs60/v2/config.h index 05255d133..7169d846b 100644 --- a/keyboards/hs60/v2/config.h +++ b/keyboards/hs60/v2/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/idobo/config.h b/keyboards/idobo/config.h index 122180780..e1c08afae 100644 --- a/keyboards/idobo/config.h +++ b/keyboards/idobo/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/jc65/v32u4/config.h b/keyboards/jc65/v32u4/config.h index 98256b128..8233dd1e8 100644 --- a/keyboards/jc65/v32u4/config.h +++ b/keyboards/jc65/v32u4/config.h @@ -52,6 +52,6 @@ along with this program. If not, see . #endif #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/jd40/config.h b/keyboards/jd40/config.h index 70648d2f5..c03bb3aec 100644 --- a/keyboards/jd40/config.h +++ b/keyboards/jd40/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/jd45/config.h b/keyboards/jd45/config.h index d3137b9f4..02968b44e 100644 --- a/keyboards/jd45/config.h +++ b/keyboards/jd45/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/jd45/keymaps/mjt/config.h b/keyboards/jd45/keymaps/mjt/config.h index 5507caae5..da1adc9af 100644 --- a/keyboards/jd45/keymaps/mjt/config.h +++ b/keyboards/jd45/keymaps/mjt/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index e88147ac8..c068685a4 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -42,7 +42,7 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_UART 1 diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index a8df46f01..80fa07d3b 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_UART 1 diff --git a/keyboards/kagamidget/config.h b/keyboards/kagamidget/config.h index fc9463aee..00e09530e 100644 --- a/keyboards/kagamidget/config.h +++ b/keyboards/kagamidget/config.h @@ -57,7 +57,7 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 8 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/katana60/config.h b/keyboards/katana60/config.h index eb67c0b21..3385ddb9c 100644 --- a/keyboards/katana60/config.h +++ b/keyboards/katana60/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd19x/config.h b/keyboards/kbdfans/kbd19x/config.h index 9c5f2ba38..d722dc261 100644 --- a/keyboards/kbdfans/kbd19x/config.h +++ b/keyboards/kbdfans/kbd19x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd4x/config.h b/keyboards/kbdfans/kbd4x/config.h index c99fcc73f..07bc4b990 100644 --- a/keyboards/kbdfans/kbd4x/config.h +++ b/keyboards/kbdfans/kbd4x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd66/config.h b/keyboards/kbdfans/kbd66/config.h index 730df1307..a2666a619 100644 --- a/keyboards/kbdfans/kbd66/config.h +++ b/keyboards/kbdfans/kbd66/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BREATHING_PERIOD 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -180,4 +180,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 - diff --git a/keyboards/kbdfans/kbd67/hotswap/config.h b/keyboards/kbdfans/kbd67/hotswap/config.h index 8822b213e..fca9916ed 100644 --- a/keyboards/kbdfans/kbd67/hotswap/config.h +++ b/keyboards/kbdfans/kbd67/hotswap/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd67/rev1/config.h b/keyboards/kbdfans/kbd67/rev1/config.h index a98687569..7a26192f4 100644 --- a/keyboards/kbdfans/kbd67/rev1/config.h +++ b/keyboards/kbdfans/kbd67/rev1/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd67/rev2/config.h b/keyboards/kbdfans/kbd67/rev2/config.h index 1c8385f7d..97945eec8 100644 --- a/keyboards/kbdfans/kbd67/rev2/config.h +++ b/keyboards/kbdfans/kbd67/rev2/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd6x/config.h b/keyboards/kbdfans/kbd6x/config.h index d3f1ee82c..1ee31e569 100644 --- a/keyboards/kbdfans/kbd6x/config.h +++ b/keyboards/kbdfans/kbd6x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd75/config.h b/keyboards/kbdfans/kbd75/config.h index 6f0cd86de..611e682e5 100644 --- a/keyboards/kbdfans/kbd75/config.h +++ b/keyboards/kbdfans/kbd75/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd8x/config.h b/keyboards/kbdfans/kbd8x/config.h index 2cae29626..bdd310440 100644 --- a/keyboards/kbdfans/kbd8x/config.h +++ b/keyboards/kbdfans/kbd8x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h index 5c002f9b3..7e9cdaa08 100644 --- a/keyboards/kc60/config.h +++ b/keyboards/kc60/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kc60se/config.h b/keyboards/kc60se/config.h index 66a4aa0cb..5fffe6114 100644 --- a/keyboards/kc60se/config.h +++ b/keyboards/kc60se/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/keebio/bdn9/config.h b/keyboards/keebio/bdn9/config.h index 1637ce45f..19e625348 100644 --- a/keyboards/keebio/bdn9/config.h +++ b/keyboards/keebio/bdn9/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/bfo9000/config.h b/keyboards/keebio/bfo9000/config.h index c5afb265f..b45ec9c2f 100644 --- a/keyboards/keebio/bfo9000/config.h +++ b/keyboards/keebio/bfo9000/config.h @@ -38,7 +38,7 @@ along with this program. If not, see . #define MATRIX_COL_PINS { B5, B6, B2, B3, B1, F7, F6, F5, F4 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/chocopad/config.h b/keyboards/keebio/chocopad/config.h index fb00ae70a..d8831556c 100644 --- a/keyboards/keebio/chocopad/config.h +++ b/keyboards/keebio/chocopad/config.h @@ -27,7 +27,7 @@ #define BACKLIGHT_LEVELS 6 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/dilly/config.h b/keyboards/keebio/dilly/config.h index 1489ec302..e4d17df47 100644 --- a/keyboards/keebio/dilly/config.h +++ b/keyboards/keebio/dilly/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/fourier/config.h b/keyboards/keebio/fourier/config.h index 70967a13f..9ddc53a0c 100644 --- a/keyboards/keebio/fourier/config.h +++ b/keyboards/keebio/fourier/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/levinson/rev1/config.h b/keyboards/keebio/levinson/rev1/config.h index eec95f727..52cf7baf7 100644 --- a/keyboards/keebio/levinson/rev1/config.h +++ b/keyboards/keebio/levinson/rev1/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/levinson/rev2/config.h b/keyboards/keebio/levinson/rev2/config.h index a9fe89586..1365ae792 100644 --- a/keyboards/keebio/levinson/rev2/config.h +++ b/keyboards/keebio/levinson/rev2/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/nyquist/rev1/config.h b/keyboards/keebio/nyquist/rev1/config.h index 98381aca7..75fa43b58 100644 --- a/keyboards/keebio/nyquist/rev1/config.h +++ b/keyboards/keebio/nyquist/rev1/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/nyquist/rev2/config.h b/keyboards/keebio/nyquist/rev2/config.h index 52c50694b..9775113c6 100644 --- a/keyboards/keebio/nyquist/rev2/config.h +++ b/keyboards/keebio/nyquist/rev2/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/nyquist/rev3/config.h b/keyboards/keebio/nyquist/rev3/config.h index 3c7822def..b2573d1dc 100644 --- a/keyboards/keebio/nyquist/rev3/config.h +++ b/keyboards/keebio/nyquist/rev3/config.h @@ -42,7 +42,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/quefrency/rev1/config.h b/keyboards/keebio/quefrency/rev1/config.h index 67cef6195..9778ef470 100644 --- a/keyboards/keebio/quefrency/rev1/config.h +++ b/keyboards/keebio/quefrency/rev1/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define SPLIT_HAND_PIN D2 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/rorschach/rev1/config.h b/keyboards/keebio/rorschach/rev1/config.h index 13402544f..bcfce2bee 100644 --- a/keyboards/keebio/rorschach/rev1/config.h +++ b/keyboards/keebio/rorschach/rev1/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/keebio/tragicforce68/config.h b/keyboards/keebio/tragicforce68/config.h index b415b5d71..4a1b6378c 100644 --- a/keyboards/keebio/tragicforce68/config.h +++ b/keyboards/keebio/tragicforce68/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 7 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/viterbi/rev1/config.h b/keyboards/keebio/viterbi/rev1/config.h index e6fc13abd..12a61448d 100644 --- a/keyboards/keebio/viterbi/rev1/config.h +++ b/keyboards/keebio/viterbi/rev1/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/viterbi/rev2/config.h b/keyboards/keebio/viterbi/rev2/config.h index b2970610e..0b78604d8 100644 --- a/keyboards/keebio/viterbi/rev2/config.h +++ b/keyboards/keebio/viterbi/rev2/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keebio/wavelet/config.h b/keyboards/keebio/wavelet/config.h index 5610bba17..6f67fdbaf 100644 --- a/keyboards/keebio/wavelet/config.h +++ b/keyboards/keebio/wavelet/config.h @@ -38,7 +38,7 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F6, B1, B2, B6, B4, E6 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/keycapsss/o4l_5x12/config.h b/keyboards/keycapsss/o4l_5x12/config.h index b53e372d0..67bde35cf 100644 --- a/keyboards/keycapsss/o4l_5x12/config.h +++ b/keyboards/keycapsss/o4l_5x12/config.h @@ -34,7 +34,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kinesis/config.h b/keyboards/kinesis/config.h index 74e85f6f1..368037d8b 100644 --- a/keyboards/kinesis/config.h +++ b/keyboards/kinesis/config.h @@ -36,7 +36,7 @@ along with this program. If not, see . #define MOUSEKEY_WHEEL_TIME_TO_MAX 1 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kinesis/stapelberg/config.h b/keyboards/kinesis/stapelberg/config.h index 321aec5eb..992480195 100644 --- a/keyboards/kinesis/stapelberg/config.h +++ b/keyboards/kinesis/stapelberg/config.h @@ -30,7 +30,7 @@ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* don't know if this should be defined at the board or top level. Assuming board #define MOUSEKEY_DELAY 100 diff --git a/keyboards/kira75/config.h b/keyboards/kira75/config.h index 4f98c1df8..15be87d26 100644 --- a/keyboards/kira75/config.h +++ b/keyboards/kira75/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 8 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kmac/config.h b/keyboards/kmac/config.h index bea682173..110a7ac0f 100644 --- a/keyboards/kmac/config.h +++ b/keyboards/kmac/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . // #define BACKLIGHT_BREATHING /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kmac/matrix.c b/keyboards/kmac/matrix.c index 82f0621f2..00da96604 100644 --- a/keyboards/kmac/matrix.c +++ b/keyboards/kmac/matrix.c @@ -28,8 +28,8 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif #define COL_SHIFTER ((uint32_t)1) @@ -83,7 +83,7 @@ uint8_t matrix_scan(void) } } - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } diff --git a/keyboards/kmini/config.h b/keyboards/kmini/config.h index 7a795d49d..b5460c9de 100755 --- a/keyboards/kmini/config.h +++ b/keyboards/kmini/config.h @@ -48,6 +48,6 @@ // #define BACKLIGHT_BREATHING /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #endif diff --git a/keyboards/kmini/matrix.c b/keyboards/kmini/matrix.c index 69135909a..9888f1a76 100755 --- a/keyboards/kmini/matrix.c +++ b/keyboards/kmini/matrix.c @@ -27,8 +27,8 @@ /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif #define COL_SHIFTER ((uint32_t)1) @@ -98,7 +98,7 @@ uint8_t matrix_scan(void) } } - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } diff --git a/keyboards/knops/mini/config.h b/keyboards/knops/mini/config.h index 312914127..01a5f44ba 100644 --- a/keyboards/knops/mini/config.h +++ b/keyboards/knops/mini/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kona_classic/config.h b/keyboards/kona_classic/config.h index 819a7475a..affd572b7 100644 --- a/keyboards/kona_classic/config.h +++ b/keyboards/kona_classic/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/laptreus/config.h b/keyboards/laptreus/config.h index de6b7ce94..675d7b007 100644 --- a/keyboards/laptreus/config.h +++ b/keyboards/laptreus/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/launchpad/config.h b/keyboards/launchpad/config.h index 4023a2201..d93fe65d2 100644 --- a/keyboards/launchpad/config.h +++ b/keyboards/launchpad/config.h @@ -38,7 +38,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lazydesigners/dimple/config.h b/keyboards/lazydesigners/dimple/config.h index 0f7a8798e..9814d1050 100644 --- a/keyboards/lazydesigners/dimple/config.h +++ b/keyboards/lazydesigners/dimple/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lazydesigners/the50/config.h b/keyboards/lazydesigners/the50/config.h index d1ddbfea4..72246eaba 100644 --- a/keyboards/lazydesigners/the50/config.h +++ b/keyboards/lazydesigners/the50/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lazydesigners/the60/config.h b/keyboards/lazydesigners/the60/config.h index a767d1dc8..d6bd2205c 100644 --- a/keyboards/lazydesigners/the60/config.h +++ b/keyboards/lazydesigners/the60/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h index e9dc0a534..c6e7f6479 100644 --- a/keyboards/lets_split/rev1/config.h +++ b/keyboards/lets_split/rev1/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h index e31026965..2481ce041 100644 --- a/keyboards/lets_split/rev2/config.h +++ b/keyboards/lets_split/rev2/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/lets_split/sockets/config.h b/keyboards/lets_split/sockets/config.h index 9c6367f53..2d3e68610 100644 --- a/keyboards/lets_split/sockets/config.h +++ b/keyboards/lets_split/sockets/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/lets_split_eh/config.h b/keyboards/lets_split_eh/config.h index c227326c0..655d35e1a 100644 --- a/keyboards/lets_split_eh/config.h +++ b/keyboards/lets_split_eh/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define MATRIX_COLS 6 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ //#define SOFT_SERIAL_PIN D0 diff --git a/keyboards/lfkeyboards/lfk65_hs/config.h b/keyboards/lfkeyboards/lfk65_hs/config.h index 73e906c3b..f448419d4 100644 --- a/keyboards/lfkeyboards/lfk65_hs/config.h +++ b/keyboards/lfkeyboards/lfk65_hs/config.h @@ -34,7 +34,7 @@ #define RGBLIGHT_VAL_STEP 17 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/lfk78/config.h b/keyboards/lfkeyboards/lfk78/config.h index 30919894c..44b55b50e 100644 --- a/keyboards/lfkeyboards/lfk78/config.h +++ b/keyboards/lfkeyboards/lfk78/config.h @@ -65,7 +65,7 @@ along with this program. If not, see . #define TAPPING_TERM 200 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/lfk87/config.h b/keyboards/lfkeyboards/lfk87/config.h index 00df42977..00df4e911 100644 --- a/keyboards/lfkeyboards/lfk87/config.h +++ b/keyboards/lfkeyboards/lfk87/config.h @@ -65,7 +65,7 @@ along with this program. If not, see . #define TAPPING_TERM 200 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/lfkpad/config.h b/keyboards/lfkeyboards/lfkpad/config.h index ea29e84a4..1d8de837d 100644 --- a/keyboards/lfkeyboards/lfkpad/config.h +++ b/keyboards/lfkeyboards/lfkpad/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . #define TAPPING_TERM 200 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/mini1800/config.h b/keyboards/lfkeyboards/mini1800/config.h index e4d197aa2..214f5f45a 100644 --- a/keyboards/lfkeyboards/mini1800/config.h +++ b/keyboards/lfkeyboards/mini1800/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define TAPPING_TERM 200 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lfkeyboards/smk65/config.h b/keyboards/lfkeyboards/smk65/config.h index ddc7c5165..deca087bc 100644 --- a/keyboards/lfkeyboards/smk65/config.h +++ b/keyboards/lfkeyboards/smk65/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 17 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/lily58/matrix.c b/keyboards/lily58/matrix.c index fc42dd14d..328d16c77 100644 --- a/keyboards/lily58/matrix.c +++ b/keyboards/lily58/matrix.c @@ -37,11 +37,11 @@ along with this program. If not, see . # include "serial.h" #endif -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -145,7 +145,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -162,7 +162,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -175,8 +175,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/lily58/rev1/config.h b/keyboards/lily58/rev1/config.h index 7a4386e70..8fd42070e 100644 --- a/keyboards/lily58/rev1/config.h +++ b/keyboards/lily58/rev1/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/m0lly/config.h b/keyboards/m0lly/config.h index 21f5fd3fb..010833ac8 100644 --- a/keyboards/m0lly/config.h +++ b/keyboards/m0lly/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/m10a/config.h b/keyboards/m10a/config.h index ec425dfbd..f2e6e45e7 100644 --- a/keyboards/m10a/config.h +++ b/keyboards/m10a/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 6 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index 59e66e133..d8389fc00 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -92,7 +92,7 @@ along with this program. If not, see . #define DEBUG_BOOT_TRACING_PIN 23 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/massdrop/alt/matrix.c b/keyboards/massdrop/alt/matrix.c index 472479d30..314115571 100644 --- a/keyboards/massdrop/alt/matrix.c +++ b/keyboards/massdrop/alt/matrix.c @@ -128,7 +128,7 @@ uint8_t matrix_scan(void) else { //Begin or extend debounce on change - mdebouncing = timer_read64() + DEBOUNCING_DELAY; + mdebouncing = timer_read64() + DEBOUNCE; } matrix_scan_quantum(); diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h index 9b9f98f5f..215a2e1b1 100644 --- a/keyboards/massdrop/ctrl/config.h +++ b/keyboards/massdrop/ctrl/config.h @@ -92,7 +92,7 @@ along with this program. If not, see . #define DEBUG_BOOT_TRACING_PIN 23 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/massdrop/ctrl/matrix.c b/keyboards/massdrop/ctrl/matrix.c index 5f1741e58..f3529fe72 100644 --- a/keyboards/massdrop/ctrl/matrix.c +++ b/keyboards/massdrop/ctrl/matrix.c @@ -128,7 +128,7 @@ uint8_t matrix_scan(void) else { //Begin or extend debounce on change - mdebouncing = timer_read64() + DEBOUNCING_DELAY; + mdebouncing = timer_read64() + DEBOUNCE; } matrix_scan_quantum(); diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index 6d8225d74..50496c16b 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -32,7 +32,7 @@ //#define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mechkeys/mk60/config.h b/keyboards/mechkeys/mk60/config.h index 9d6a2565d..9fccd8a8b 100644 --- a/keyboards/mechkeys/mk60/config.h +++ b/keyboards/mechkeys/mk60/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/mechmini/v2/config.h b/keyboards/mechmini/v2/config.h index edca6a5c4..9da3e5f0a 100755 --- a/keyboards/mechmini/v2/config.h +++ b/keyboards/mechmini/v2/config.h @@ -48,7 +48,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/meira/featherble/config.h b/keyboards/meira/featherble/config.h index d8f86fe02..fb24c6079 100644 --- a/keyboards/meira/featherble/config.h +++ b/keyboards/meira/featherble/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/meira/matrix.c b/keyboards/meira/matrix.c index c1952f35f..030c91332 100644 --- a/keyboards/meira/matrix.c +++ b/keyboards/meira/matrix.c @@ -33,11 +33,11 @@ along with this program. If not, see . #include "config.h" #include "timer.h" -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -132,7 +132,7 @@ uint8_t _matrix_scan(void) { // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -144,8 +144,8 @@ uint8_t _matrix_scan(void) } -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -276,5 +276,3 @@ static void unselect_cols(void) _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW } } - - diff --git a/keyboards/meira/promicro/config.h b/keyboards/meira/promicro/config.h index 3c2113a20..67e5ca06d 100644 --- a/keyboards/meira/promicro/config.h +++ b/keyboards/meira/promicro/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define CATERINA_BOOTLOADER /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/meishi/config.h b/keyboards/meishi/config.h index 6aa4e6b6e..3393610c7 100644 --- a/keyboards/meishi/config.h +++ b/keyboards/meishi/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -180,4 +180,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 - diff --git a/keyboards/melody96/config.h b/keyboards/melody96/config.h index db814d013..201b1ad07 100644 --- a/keyboards/melody96/config.h +++ b/keyboards/melody96/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/meme/config.h b/keyboards/meme/config.h index bd3e1cf2c..e06b0e4ef 100644 --- a/keyboards/meme/config.h +++ b/keyboards/meme/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/miniaxe/config.h b/keyboards/miniaxe/config.h index be8ef4baf..db8509717 100644 --- a/keyboards/miniaxe/config.h +++ b/keyboards/miniaxe/config.h @@ -70,7 +70,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/minidox/config.h b/keyboards/minidox/config.h index b99180eb1..7502983b6 100644 --- a/keyboards/minidox/config.h +++ b/keyboards/minidox/config.h @@ -42,7 +42,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mint60/config.h b/keyboards/mint60/config.h index 35449eb26..c98b9c1af 100644 --- a/keyboards/mint60/config.h +++ b/keyboards/mint60/config.h @@ -59,7 +59,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h index d7df83cfe..59402e869 100644 --- a/keyboards/miuni32/config.h +++ b/keyboards/miuni32/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/model01/config.h b/keyboards/model01/config.h index 167310731..c2160979c 100644 --- a/keyboards/model01/config.h +++ b/keyboards/model01/config.h @@ -32,7 +32,7 @@ along with this program. If not, see . #define MATRIX_COLS 8 /* The scanners already debounce for us */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 /* RGB matrix constants */ #define DRIVER_LED_TOTAL 64 diff --git a/keyboards/mt40/config.h b/keyboards/mt40/config.h index e268c3c1a..48f707f71 100644 --- a/keyboards/mt40/config.h +++ b/keyboards/mt40/config.h @@ -68,7 +68,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -/* #define DEBOUNCING_DELAY 5 */ +/* #define DEBOUNCE 5 */ /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/mt980/config.h b/keyboards/mt980/config.h index 88c25a587..6b8b95295 100644 --- a/keyboards/mt980/config.h +++ b/keyboards/mt980/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mxss/config.h b/keyboards/mxss/config.h index e3636ed51..812f301d6 100644 --- a/keyboards/mxss/config.h +++ b/keyboards/mxss/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Basic RGB configuration */ #define RGB_DI_PIN C7 diff --git a/keyboards/namecard2x4/rev1/config.h b/keyboards/namecard2x4/rev1/config.h index 4c60d059d..9286afa69 100644 --- a/keyboards/namecard2x4/rev1/config.h +++ b/keyboards/namecard2x4/rev1/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 1 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/namecard2x4/rev2/config.h b/keyboards/namecard2x4/rev2/config.h index 4343dff8c..f2cf053d2 100644 --- a/keyboards/namecard2x4/rev2/config.h +++ b/keyboards/namecard2x4/rev2/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . //#define BACKLIGHT_LEVELS 1 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/nek_type_a/config.h b/keyboards/nek_type_a/config.h index 782b91d0e..5b105804d 100644 --- a/keyboards/nek_type_a/config.h +++ b/keyboards/nek_type_a/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -51,5 +51,3 @@ along with this program. If not, see . #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) - - diff --git a/keyboards/nek_type_a/matrix.c b/keyboards/nek_type_a/matrix.c index 525296b1f..a3c0155e1 100644 --- a/keyboards/nek_type_a/matrix.c +++ b/keyboards/nek_type_a/matrix.c @@ -38,11 +38,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -160,7 +160,7 @@ uint8_t matrix_scan(void) // Set row, read cols for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -178,7 +178,7 @@ uint8_t matrix_scan(void) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col); if (matrix_changed) { debouncing = true; @@ -192,8 +192,8 @@ uint8_t matrix_scan(void) #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -207,7 +207,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/niu_mini/config.h b/keyboards/niu_mini/config.h index 9a4b43c1e..2c202a8e4 100644 --- a/keyboards/niu_mini/config.h +++ b/keyboards/niu_mini/config.h @@ -51,7 +51,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/nk65/config.h b/keyboards/nk65/config.h index 0edb1bb62..791e44468 100755 --- a/keyboards/nk65/config.h +++ b/keyboards/nk65/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/novelpad/config.h b/keyboards/novelpad/config.h index 3a47c0eb6..c9b6b91a5 100755 --- a/keyboards/novelpad/config.h +++ b/keyboards/novelpad/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/noxary/220/config.h b/keyboards/noxary/220/config.h index e5a6be2de..1242de61b 100644 --- a/keyboards/noxary/220/config.h +++ b/keyboards/noxary/220/config.h @@ -86,7 +86,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/noxary/260/config.h b/keyboards/noxary/260/config.h index 984712dd1..379dbbf78 100644 --- a/keyboards/noxary/260/config.h +++ b/keyboards/noxary/260/config.h @@ -86,7 +86,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/noxary/268/config.h b/keyboards/noxary/268/config.h index d6f5234cb..8264b8019 100644 --- a/keyboards/noxary/268/config.h +++ b/keyboards/noxary/268/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/noxary/268_2/config.h b/keyboards/noxary/268_2/config.h index 733c87990..547c729f9 100644 --- a/keyboards/noxary/268_2/config.h +++ b/keyboards/noxary/268_2/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/noxary/280/config.h b/keyboards/noxary/280/config.h index 427709d1b..d0a10866a 100644 --- a/keyboards/noxary/280/config.h +++ b/keyboards/noxary/280/config.h @@ -86,7 +86,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/noxary/x268/config.h b/keyboards/noxary/x268/config.h index d2a8c3b9f..0604f6529 100644 --- a/keyboards/noxary/x268/config.h +++ b/keyboards/noxary/x268/config.h @@ -65,7 +65,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/ok60/config.h b/keyboards/ok60/config.h index eb75b71c9..cc056a489 100644 --- a/keyboards/ok60/config.h +++ b/keyboards/ok60/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/omnikey_blackheart/config.h b/keyboards/omnikey_blackheart/config.h index edfd113de..6c9be77b6 100644 --- a/keyboards/omnikey_blackheart/config.h +++ b/keyboards/omnikey_blackheart/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/orange75/config.h b/keyboards/orange75/config.h index 7d1b497be..35399cc60 100644 --- a/keyboards/orange75/config.h +++ b/keyboards/orange75/config.h @@ -26,7 +26,7 @@ /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/org60/config.h b/keyboards/org60/config.h index 5f3f4f5de..f455fea2a 100644 --- a/keyboards/org60/config.h +++ b/keyboards/org60/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* RGB Underglow * F6 PIN for Org60 that has pre-soldered WS2812 LEDs diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h index 198fff5ac..89e36dce7 100644 --- a/keyboards/orthodox/rev1/config.h +++ b/keyboards/orthodox/rev1/config.h @@ -57,7 +57,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ // #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/orthodox/rev3/config.h b/keyboards/orthodox/rev3/config.h index 53e5b15ae..ad3437a62 100644 --- a/keyboards/orthodox/rev3/config.h +++ b/keyboards/orthodox/rev3/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ // #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/orthodox/rev3_teensy/config.h b/keyboards/orthodox/rev3_teensy/config.h index 54cbb823e..c26e15dee 100644 --- a/keyboards/orthodox/rev3_teensy/config.h +++ b/keyboards/orthodox/rev3_teensy/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ // #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/paladin64/config.h b/keyboards/paladin64/config.h index 0696fefd0..8d7cef248 100755 --- a/keyboards/paladin64/config.h +++ b/keyboards/paladin64/config.h @@ -97,7 +97,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/panc60/config.h b/keyboards/panc60/config.h index edb25ad27..b5889180e 100644 --- a/keyboards/panc60/config.h +++ b/keyboards/panc60/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 00850b8f0..3dbe5ee03 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h index 3fa462445..4ca731f2d 100644 --- a/keyboards/phantom/config.h +++ b/keyboards/phantom/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/pinky/3/config.h b/keyboards/pinky/3/config.h index 370d2a702..8a3f53a17 100644 --- a/keyboards/pinky/3/config.h +++ b/keyboards/pinky/3/config.h @@ -81,7 +81,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/pinky/4/config.h b/keyboards/pinky/4/config.h index a6beaf29d..a1544bc48 100644 --- a/keyboards/pinky/4/config.h +++ b/keyboards/pinky/4/config.h @@ -81,7 +81,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/plaid/config.h b/keyboards/plaid/config.h index efef3ca18..9da31d700 100644 --- a/keyboards/plaid/config.h +++ b/keyboards/plaid/config.h @@ -83,7 +83,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/plain60/config.h b/keyboards/plain60/config.h index 5dd784887..a86c23587 100644 --- a/keyboards/plain60/config.h +++ b/keyboards/plain60/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define QMK_ESC_OUTPUT D2 // usually COL #define QMK_ESC_INPUT B4 // usually ROW diff --git a/keyboards/planck/config.h b/keyboards/planck/config.h index 837311c76..e0839a175 100644 --- a/keyboards/planck/config.h +++ b/keyboards/planck/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/planck/keymaps/dodger/config.h b/keyboards/planck/keymaps/dodger/config.h index 4b7931e77..f6aaec155 100644 --- a/keyboards/planck/keymaps/dodger/config.h +++ b/keyboards/planck/keymaps/dodger/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 15 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/playkbtw/ca66/ca66.c b/keyboards/playkbtw/ca66/ca66.c index 6f24a895f..5f61df64e 100644 --- a/keyboards/playkbtw/ca66/ca66.c +++ b/keyboards/playkbtw/ca66/ca66.c @@ -9,7 +9,7 @@ void bootmagic_lite(void) // We need multiple scans because debouncing can't be turned off. matrix_scan(); - wait_ms(DEBOUNCING_DELAY); + wait_ms(DEBOUNCE); matrix_scan(); // If the Esc (matrix 0,0) is held down on power up, diff --git a/keyboards/playkbtw/ca66/config.h b/keyboards/playkbtw/ca66/config.h index 958fdd0d4..b4c0e6234 100644 --- a/keyboards/playkbtw/ca66/config.h +++ b/keyboards/playkbtw/ca66/config.h @@ -29,7 +29,7 @@ #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/playkbtw/pk60/config.h b/keyboards/playkbtw/pk60/config.h index 77822e0a1..93e29951e 100644 --- a/keyboards/playkbtw/pk60/config.h +++ b/keyboards/playkbtw/pk60/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h index 1887bff5d..7ed4814fa 100644 --- a/keyboards/preonic/config.h +++ b/keyboards/preonic/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/preonic/keymaps/kinesis/config.h b/keyboards/preonic/keymaps/kinesis/config.h index 7899408cd..fd934726b 100644 --- a/keyboards/preonic/keymaps/kinesis/config.h +++ b/keyboards/preonic/keymaps/kinesis/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/preonic/keymaps/zach/config.h b/keyboards/preonic/keymaps/zach/config.h index 58690a4ab..66e6b087f 100644 --- a/keyboards/preonic/keymaps/zach/config.h +++ b/keyboards/preonic/keymaps/zach/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 5 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_e/config.h b/keyboards/primekb/prime_e/config.h index 331993f4b..9ef4edd88 100644 --- a/keyboards/primekb/prime_e/config.h +++ b/keyboards/primekb/prime_e/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_l/config.h b/keyboards/primekb/prime_l/config.h index 8451a7686..786ceb59c 100644 --- a/keyboards/primekb/prime_l/config.h +++ b/keyboards/primekb/prime_l/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 4 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_m/config.h b/keyboards/primekb/prime_m/config.h index 119e20a40..75731abf7 100644 --- a/keyboards/primekb/prime_m/config.h +++ b/keyboards/primekb/prime_m/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 4 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_o/config.h b/keyboards/primekb/prime_o/config.h index 2a35785ea..36de49b9e 100644 --- a/keyboards/primekb/prime_o/config.h +++ b/keyboards/primekb/prime_o/config.h @@ -44,7 +44,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 4 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/primekb/prime_r/config.h b/keyboards/primekb/prime_r/config.h index 345bf91b8..942eced32 100644 --- a/keyboards/primekb/prime_r/config.h +++ b/keyboards/primekb/prime_r/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/puck/config.h b/keyboards/puck/config.h index b2cb1b23e..3eaa8cd26 100644 --- a/keyboards/puck/config.h +++ b/keyboards/puck/config.h @@ -22,7 +22,7 @@ #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* number of backlight levels */ #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/quantrik/kyuu/config.h b/keyboards/quantrik/kyuu/config.h index 655314985..b40ce64cc 100644 --- a/keyboards/quantrik/kyuu/config.h +++ b/keyboards/quantrik/kyuu/config.h @@ -80,7 +80,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/qwertyydox/config.h b/keyboards/qwertyydox/config.h index 4c651d3c6..67f5d3c16 100644 --- a/keyboards/qwertyydox/config.h +++ b/keyboards/qwertyydox/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/qwertyydox/rev1/config.h b/keyboards/qwertyydox/rev1/config.h index 5823beb3d..703d62de7 100644 --- a/keyboards/qwertyydox/rev1/config.h +++ b/keyboards/qwertyydox/rev1/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/rama/koyu/config.h b/keyboards/rama/koyu/config.h index e7817e79a..4fa8c3d8a 100644 --- a/keyboards/rama/koyu/config.h +++ b/keyboards/rama/koyu/config.h @@ -44,7 +44,7 @@ #define DIODE_DIRECTION COL2ROW // Set 0 if debouncing isn't needed -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/rama/m10_b/config.h b/keyboards/rama/m10_b/config.h index 25fd58d15..32d1d21ed 100644 --- a/keyboards/rama/m10_b/config.h +++ b/keyboards/rama/m10_b/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/rama/m60_a/config.h b/keyboards/rama/m60_a/config.h index 1cbdee5ae..b3e916231 100644 --- a/keyboards/rama/m60_a/config.h +++ b/keyboards/rama/m60_a/config.h @@ -42,7 +42,7 @@ #define DIODE_DIRECTION COL2ROW // Set 0 if debouncing isn't needed -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/rama/m6_a/config.h b/keyboards/rama/m6_a/config.h index efaf74a93..341e29b95 100644 --- a/keyboards/rama/m6_a/config.h +++ b/keyboards/rama/m6_a/config.h @@ -51,7 +51,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/rama/m6_b/config.h b/keyboards/rama/m6_b/config.h index 0d690bffa..015bc6df8 100644 --- a/keyboards/rama/m6_b/config.h +++ b/keyboards/rama/m6_b/config.h @@ -51,7 +51,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/rama/u80_a/config.h b/keyboards/rama/u80_a/config.h index 953bf63f2..44d9e2133 100644 --- a/keyboards/rama/u80_a/config.h +++ b/keyboards/rama/u80_a/config.h @@ -52,7 +52,7 @@ // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/redox/rev1/config.h b/keyboards/redox/rev1/config.h index ce205e02e..72ca94b79 100644 --- a/keyboards/redox/rev1/config.h +++ b/keyboards/redox/rev1/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* serial.c configuration for split keyboard */ #define SOFT_SERIAL_PIN D0 diff --git a/keyboards/rgbkb/sol/config.h b/keyboards/rgbkb/sol/config.h index a7317d9d9..1afd973e9 100644 --- a/keyboards/rgbkb/sol/config.h +++ b/keyboards/rgbkb/sol/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define ENCODERS_PAD_B { D6 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* ws2812 RGB LED */ #define RGB_DI_PIN B3 diff --git a/keyboards/rgbkb/zen/rev1/config.h b/keyboards/rgbkb/zen/rev1/config.h index 88f39af48..4d81855a8 100644 --- a/keyboards/rgbkb/zen/rev1/config.h +++ b/keyboards/rgbkb/zen/rev1/config.h @@ -43,7 +43,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/rgbkb/zen/rev2/config.h b/keyboards/rgbkb/zen/rev2/config.h index c56956108..b9f3d2228 100644 --- a/keyboards/rgbkb/zen/rev2/config.h +++ b/keyboards/rgbkb/zen/rev2/config.h @@ -56,7 +56,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/rgbkb/zygomorph/rev1/config.h b/keyboards/rgbkb/zygomorph/rev1/config.h index 107e58c12..ad58761cc 100644 --- a/keyboards/rgbkb/zygomorph/rev1/config.h +++ b/keyboards/rgbkb/zygomorph/rev1/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . #define ENCODERS_PAD_B { D7 } /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* ws2812 RGB LED */ #define RGB_DI_PIN B7 diff --git a/keyboards/romac/config.h b/keyboards/romac/config.h index b92785fd5..da236c500 100644 --- a/keyboards/romac/config.h +++ b/keyboards/romac/config.h @@ -26,7 +26,7 @@ #define BACKLIGHT_LEVELS 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/s7_elephant/config.h b/keyboards/s7_elephant/config.h index 6335fbc9c..c4f57178d 100644 --- a/keyboards/s7_elephant/config.h +++ b/keyboards/s7_elephant/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/satan/config.h b/keyboards/satan/config.h index c15e5c37c..d8c9ae9ab 100644 --- a/keyboards/satan/config.h +++ b/keyboards/satan/config.h @@ -46,7 +46,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/satan/keymaps/admiralStrokers/config.h b/keyboards/satan/keymaps/admiralStrokers/config.h index 17e0ea3b7..c8d40730f 100644 --- a/keyboards/satan/keymaps/admiralStrokers/config.h +++ b/keyboards/satan/keymaps/admiralStrokers/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/satan/keymaps/fakb/config.h b/keyboards/satan/keymaps/fakb/config.h index 81598f22e..dc182753d 100644 --- a/keyboards/satan/keymaps/fakb/config.h +++ b/keyboards/satan/keymaps/fakb/config.h @@ -30,7 +30,7 @@ //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/scarletbandana/config.h b/keyboards/scarletbandana/config.h index 01cf95065..4e37b4b42 100644 --- a/keyboards/scarletbandana/config.h +++ b/keyboards/scarletbandana/config.h @@ -55,4 +55,4 @@ along with this program. If not, see . #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 diff --git a/keyboards/scythe/config.h b/keyboards/scythe/config.h index 76d332364..66d47c356 100644 --- a/keyboards/scythe/config.h +++ b/keyboards/scythe/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -237,4 +237,3 @@ along with this program. If not, see . //#define I2C_MASTER_RIGHT #define TAPPING_TERM 120 - diff --git a/keyboards/sentraq/number_pad/config.h b/keyboards/sentraq/number_pad/config.h index f02e537b6..a5df625aa 100644 --- a/keyboards/sentraq/number_pad/config.h +++ b/keyboards/sentraq/number_pad/config.h @@ -75,4 +75,4 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 diff --git a/keyboards/sentraq/s60_x/default/config.h b/keyboards/sentraq/s60_x/default/config.h index d7fb79625..dc4114143 100644 --- a/keyboards/sentraq/s60_x/default/config.h +++ b/keyboards/sentraq/s60_x/default/config.h @@ -36,7 +36,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE @@ -44,4 +44,3 @@ #define NO_ACTION_ONESHOT #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION - diff --git a/keyboards/sentraq/s60_x/keymaps/bluebear/config.h b/keyboards/sentraq/s60_x/keymaps/bluebear/config.h index c1db5f64a..0a6ce8178 100644 --- a/keyboards/sentraq/s60_x/keymaps/bluebear/config.h +++ b/keyboards/sentraq/s60_x/keymaps/bluebear/config.h @@ -31,7 +31,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/sentraq/s60_x/rgb/config.h b/keyboards/sentraq/s60_x/rgb/config.h index 0e231a722..57e736a05 100644 --- a/keyboards/sentraq/s60_x/rgb/config.h +++ b/keyboards/sentraq/s60_x/rgb/config.h @@ -36,7 +36,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define RGB_DI_PIN F6 #ifdef RGB_DI_PIN @@ -46,4 +46,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - diff --git a/keyboards/sentraq/s65_plus/config.h b/keyboards/sentraq/s65_plus/config.h index c45fd2412..51aacfc19 100644 --- a/keyboards/sentraq/s65_plus/config.h +++ b/keyboards/sentraq/s65_plus/config.h @@ -36,7 +36,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/sentraq/s65_x/config.h b/keyboards/sentraq/s65_x/config.h index 486765273..9c337bde4 100644 --- a/keyboards/sentraq/s65_x/config.h +++ b/keyboards/sentraq/s65_x/config.h @@ -38,7 +38,7 @@ #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/signum/3_0/elitec/config.h b/keyboards/signum/3_0/elitec/config.h index 3df07d17f..88e45ef45 100644 --- a/keyboards/signum/3_0/elitec/config.h +++ b/keyboards/signum/3_0/elitec/config.h @@ -20,7 +20,7 @@ #define UNUSED_PINS /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/singa/config.h b/keyboards/singa/config.h index aca1153d7..29110bd4e 100644 --- a/keyboards/singa/config.h +++ b/keyboards/singa/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/sixkeyboard/config.h b/keyboards/sixkeyboard/config.h index 3a672788b..a825467af 100644 --- a/keyboards/sixkeyboard/config.h +++ b/keyboards/sixkeyboard/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 0 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/snagpad/config.h b/keyboards/snagpad/config.h index d0c55cf97..9503ae25f 100644 --- a/keyboards/snagpad/config.h +++ b/keyboards/snagpad/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/southpole/config.h b/keyboards/southpole/config.h index 5992a360f..396384040 100644 --- a/keyboards/southpole/config.h +++ b/keyboards/southpole/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/speedo/config.h b/keyboards/speedo/config.h index ac9d5e4f1..04195b866 100644 --- a/keyboards/speedo/config.h +++ b/keyboards/speedo/config.h @@ -55,7 +55,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/standaside/config.h b/keyboards/standaside/config.h index fa3576ca5..80c9f8d21 100644 --- a/keyboards/standaside/config.h +++ b/keyboards/standaside/config.h @@ -40,7 +40,7 @@ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -201,4 +201,3 @@ #define LCD_E_PIN 1 //< pin for Enable line #endif */ - diff --git a/keyboards/staryu/config.h b/keyboards/staryu/config.h index 05131b68b..dc7353fcc 100755 --- a/keyboards/staryu/config.h +++ b/keyboards/staryu/config.h @@ -68,7 +68,7 @@ along with this program. If not, see . #define BACKLIGHT_ON_STATE 1 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 0 diff --git a/keyboards/subatomic/config.h b/keyboards/subatomic/config.h index d4ace70d8..f509ca53e 100644 --- a/keyboards/subatomic/config.h +++ b/keyboards/subatomic/config.h @@ -52,7 +52,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/sx60/config.h b/keyboards/sx60/config.h index cad8b0ba4..d75e19b29 100755 --- a/keyboards/sx60/config.h +++ b/keyboards/sx60/config.h @@ -31,7 +31,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/sx60/matrix.c b/keyboards/sx60/matrix.c index 634a98a12..e8e9d6574 100644 --- a/keyboards/sx60/matrix.c +++ b/keyboards/sx60/matrix.c @@ -30,11 +30,11 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -154,7 +154,7 @@ uint8_t matrix_scan(void) /* Set row, read cols */ for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row); if (matrix_changed) { @@ -166,8 +166,8 @@ uint8_t matrix_scan(void) # endif } -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; } @@ -181,7 +181,7 @@ uint8_t matrix_scan(void) bool matrix_is_modified(void) { -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) if (debouncing) return false; #endif return true; diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h index ab564cd3b..a8fa37a5b 100755 --- a/keyboards/tada68/config.h +++ b/keyboards/tada68/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/tetris/config.h b/keyboards/tetris/config.h index 2cc7d2951..7fe0c2d64 100755 --- a/keyboards/tetris/config.h +++ b/keyboards/tetris/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -52,4 +52,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 12 - diff --git a/keyboards/the_ruler/config.h b/keyboards/the_ruler/config.h index c340019be..ecae3a4f2 100644 --- a/keyboards/the_ruler/config.h +++ b/keyboards/the_ruler/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/thevankeyboards/bananasplit/config.h b/keyboards/thevankeyboards/bananasplit/config.h index a96c59dbb..7c0b5b201 100644 --- a/keyboards/thevankeyboards/bananasplit/config.h +++ b/keyboards/thevankeyboards/bananasplit/config.h @@ -48,7 +48,7 @@ along with this program. If not, see . #define BACKLIGHT_PIN B7 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 #define TAPPING_TERM 175 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/thevankeyboards/minivan/config.h b/keyboards/thevankeyboards/minivan/config.h index 38207d38d..22fb37762 100644 --- a/keyboards/thevankeyboards/minivan/config.h +++ b/keyboards/thevankeyboards/minivan/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/thevankeyboards/minivan/keymaps/budi/config.h b/keyboards/thevankeyboards/minivan/keymaps/budi/config.h index 67bcf3546..dc36b7380 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/budi/config.h +++ b/keyboards/thevankeyboards/minivan/keymaps/budi/config.h @@ -4,10 +4,10 @@ #include "../../config.h" // place overrides here -#ifdef DEBOUNCING_DELAY -#undef DEBOUNCING_DELAY +#ifdef DEBOUNCE +#undef DEBOUNCE #endif -#define DEBOUNCING_DELAY 2 +#define DEBOUNCE 2 #define MOUSEKEY_INTERVAL 10 #define MOUSEKEY_DELAY 0 #define MOUSEKEY_TIME_TO_MAX 120 diff --git a/keyboards/thevankeyboards/roadkit/config.h b/keyboards/thevankeyboards/roadkit/config.h index 3f7178039..71bd6ba6b 100644 --- a/keyboards/thevankeyboards/roadkit/config.h +++ b/keyboards/thevankeyboards/roadkit/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/tkc1800/config.h b/keyboards/tkc1800/config.h index 2f45d04de..a45fb677e 100644 --- a/keyboards/tkc1800/config.h +++ b/keyboards/tkc1800/config.h @@ -60,7 +60,7 @@ along with this program. If not, see . //#define MATRIX_HAS_GHOST /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/tmo50/config.h b/keyboards/tmo50/config.h index 3af322e9b..ee7f0e34a 100644 --- a/keyboards/tmo50/config.h +++ b/keyboards/tmo50/config.h @@ -76,7 +76,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/toad/config.h b/keyboards/toad/config.h index f750b52bf..5f3eb43c2 100644 --- a/keyboards/toad/config.h +++ b/keyboards/toad/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/tokyo60/config.h b/keyboards/tokyo60/config.h index fddb37d28..2c1326c0a 100644 --- a/keyboards/tokyo60/config.h +++ b/keyboards/tokyo60/config.h @@ -26,7 +26,7 @@ #define DIODE_DIRECTION ROW2COL /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Set power consumption to work with mobile devices */ #define USB_MAX_POWER_CONSUMPTION 100 diff --git a/keyboards/touchpad/config.h b/keyboards/touchpad/config.h index 8e93c9427..b953b4f49 100644 --- a/keyboards/touchpad/config.h +++ b/keyboards/touchpad/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/treadstone32/config.h b/keyboards/treadstone32/config.h index 6151d6e82..a7f991453 100644 --- a/keyboards/treadstone32/config.h +++ b/keyboards/treadstone32/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/treadstone48/rev1/config.h b/keyboards/treadstone48/rev1/config.h index d8ecf170d..09fb62154 100644 --- a/keyboards/treadstone48/rev1/config.h +++ b/keyboards/treadstone48/rev1/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/treasure/type9/config.h b/keyboards/treasure/type9/config.h index 6115880d0..220b7f780 100644 --- a/keyboards/treasure/type9/config.h +++ b/keyboards/treasure/type9/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/uk78/config.h b/keyboards/uk78/config.h index eff8d1d62..879360773 100644 --- a/keyboards/uk78/config.h +++ b/keyboards/uk78/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/ut472/config.h b/keyboards/ut472/config.h index 8f0d76271..c71995ec7 100644 --- a/keyboards/ut472/config.h +++ b/keyboards/ut472/config.h @@ -40,7 +40,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/v60_type_r/config.h b/keyboards/v60_type_r/config.h index e3e00a9f8..51ca6def9 100644 --- a/keyboards/v60_type_r/config.h +++ b/keyboards/v60_type_r/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . #define RGB_STEP 16 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h index c80a011e2..249431b87 100644 --- a/keyboards/vision_division/config.h +++ b/keyboards/vision_division/config.h @@ -30,7 +30,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 0 +#define DEBOUNCE 0 #define MATRIX_MASKED diff --git a/keyboards/vitamins_included/matrix.c b/keyboards/vitamins_included/matrix.c index cf4c1064f..1f5071c69 100644 --- a/keyboards/vitamins_included/matrix.c +++ b/keyboards/vitamins_included/matrix.c @@ -45,11 +45,11 @@ along with this program. If not, see . # include "serial.h" #endif -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 +#ifndef DEBOUNCE +# define DEBOUNCE 5 #endif -#if (DEBOUNCING_DELAY > 0) +#if (DEBOUNCE > 0) static uint16_t debouncing_time; static bool debouncing = false; #endif @@ -192,7 +192,7 @@ uint8_t _matrix_scan(void) #if (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); if (matrix_changed) { @@ -209,7 +209,7 @@ uint8_t _matrix_scan(void) #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) +# if (DEBOUNCE > 0) bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); if (matrix_changed) { debouncing = true; @@ -222,8 +222,8 @@ uint8_t _matrix_scan(void) } #endif -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { +# if (DEBOUNCE > 0) + if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCE)) { for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { matrix[i+offset] = matrix_debouncing[i+offset]; } diff --git a/keyboards/vitamins_included/rev1/config.h b/keyboards/vitamins_included/rev1/config.h index 7112c7891..f4e5666fe 100644 --- a/keyboards/vitamins_included/rev1/config.h +++ b/keyboards/vitamins_included/rev1/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/waldo/config.h b/keyboards/waldo/config.h index c460e7c27..c913ae771 100644 --- a/keyboards/waldo/config.h +++ b/keyboards/waldo/config.h @@ -47,7 +47,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wasdat/config.h b/keyboards/wasdat/config.h index 73dcdc536..b5c4d3bc2 100644 --- a/keyboards/wasdat/config.h +++ b/keyboards/wasdat/config.h @@ -91,7 +91,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/westfoxtrot/aanzee/config.h b/keyboards/westfoxtrot/aanzee/config.h index 3959066b2..d88101fdc 100644 --- a/keyboards/westfoxtrot/aanzee/config.h +++ b/keyboards/westfoxtrot/aanzee/config.h @@ -68,7 +68,7 @@ along with this program. If not, see . #define RGBW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/westfoxtrot/cyclops/config.h b/keyboards/westfoxtrot/cyclops/config.h index b9a8fb28b..3af607031 100644 --- a/keyboards/westfoxtrot/cyclops/config.h +++ b/keyboards/westfoxtrot/cyclops/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -204,4 +204,4 @@ along with this program. If not, see . /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 \ No newline at end of file +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/westfoxtrot/cypher/config.h b/keyboards/westfoxtrot/cypher/config.h index 48ff816f9..137883703 100644 --- a/keyboards/westfoxtrot/cypher/config.h +++ b/keyboards/westfoxtrot/cypher/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 5 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h index f492074e3..3a2adb3c4 100644 --- a/keyboards/wilba_tech/wt60_a/config.h +++ b/keyboards/wilba_tech/wt60_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h index ec488fb50..cb0df1460 100644 --- a/keyboards/wilba_tech/wt65_a/config.h +++ b/keyboards/wilba_tech/wt65_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt69_a/config.h b/keyboards/wilba_tech/wt69_a/config.h index 653e90d47..0ed40b27e 100644 --- a/keyboards/wilba_tech/wt69_a/config.h +++ b/keyboards/wilba_tech/wt69_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h index 8d7025a60..d1ae33156 100644 --- a/keyboards/wilba_tech/wt75_a/config.h +++ b/keyboards/wilba_tech/wt75_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h index 5a825c3f7..7d974193c 100644 --- a/keyboards/wilba_tech/wt80_a/config.h +++ b/keyboards/wilba_tech/wt80_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/wilba_tech/wt8_a/config.h b/keyboards/wilba_tech/wt8_a/config.h index 43f692e0f..6604b7ce8 100644 --- a/keyboards/wilba_tech/wt8_a/config.h +++ b/keyboards/wilba_tech/wt8_a/config.h @@ -46,7 +46,7 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/xd60/rev2/config.h b/keyboards/xd60/rev2/config.h index 6c447b89f..5f23f6eac 100644 --- a/keyboards/xd60/rev2/config.h +++ b/keyboards/xd60/rev2/config.h @@ -54,7 +54,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* RGB Underglow * F6 PIN for XD60v2 that has pre-soldered WS2812 LEDs diff --git a/keyboards/xd60/rev3/config.h b/keyboards/xd60/rev3/config.h index d88330cf7..861755e45 100644 --- a/keyboards/xd60/rev3/config.h +++ b/keyboards/xd60/rev3/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* RGB Underglow * F6 PIN for XD60v3 that has pre-soldered LEDs diff --git a/keyboards/xd75/config.h b/keyboards/xd75/config.h index bc1f1860f..7f8b71c45 100644 --- a/keyboards/xd75/config.h +++ b/keyboards/xd75/config.h @@ -48,12 +48,12 @@ along with this program. If not, see . /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW - + #define BACKLIGHT_PIN F5 #define BACKLIGHT_LEVELS 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/xd84/config.h b/keyboards/xd84/config.h index abb9f17a5..138c2c4c8 100644 --- a/keyboards/xd84/config.h +++ b/keyboards/xd84/config.h @@ -75,7 +75,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/xd87/config.h b/keyboards/xd87/config.h index 4fb52be6e..dae9d3db8 100644 --- a/keyboards/xd87/config.h +++ b/keyboards/xd87/config.h @@ -64,7 +64,7 @@ along with this program. If not, see . // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/xd96/config.h b/keyboards/xd96/config.h index df21205f8..ea6c878e9 100644 --- a/keyboards/xd96/config.h +++ b/keyboards/xd96/config.h @@ -76,7 +76,7 @@ // #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/xmmx/config.h b/keyboards/xmmx/config.h index c08829ce3..bee047bf0 100644 --- a/keyboards/xmmx/config.h +++ b/keyboards/xmmx/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/yd60mq/config.h b/keyboards/yd60mq/config.h index 2a899fa3e..75e697802 100644 --- a/keyboards/yd60mq/config.h +++ b/keyboards/yd60mq/config.h @@ -29,7 +29,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -44,4 +44,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - diff --git a/keyboards/yd68/config.h b/keyboards/yd68/config.h index 4caedb0b5..17461c5dc 100644 --- a/keyboards/yd68/config.h +++ b/keyboards/yd68/config.h @@ -62,7 +62,7 @@ along with this program. If not, see . #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/yosino58/rev1/config.h b/keyboards/yosino58/rev1/config.h index 8a0cf151b..0214bc102 100644 --- a/keyboards/yosino58/rev1/config.h +++ b/keyboards/yosino58/rev1/config.h @@ -20,7 +20,7 @@ along with this program. If not, see . /* USB Device descriptor parameter */ #define VENDOR_ID 0x0F6A -#define PRODUCT_ID 0x01B8 +#define PRODUCT_ID 0x01B8 #define DEVICE_VER 0x0001 #define MANUFACTURER sakuranbo0046 #define PRODUCT yosino58 @@ -42,7 +42,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/z150_blackheart/config.h b/keyboards/z150_blackheart/config.h index c8a38b038..fc33021ff 100644 --- a/keyboards/z150_blackheart/config.h +++ b/keyboards/z150_blackheart/config.h @@ -23,7 +23,7 @@ #define DIODE_DIRECTION COL2ROW /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zeal60/config.h b/keyboards/zeal60/config.h index a5e41116d..7c5340e73 100644 --- a/keyboards/zeal60/config.h +++ b/keyboards/zeal60/config.h @@ -42,7 +42,7 @@ #define DIODE_DIRECTION COL2ROW // Set 0 if debouncing isn't needed -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zeal60/zeal60.c b/keyboards/zeal60/zeal60.c index 5f93c571a..93f442f55 100644 --- a/keyboards/zeal60/zeal60.c +++ b/keyboards/zeal60/zeal60.c @@ -234,8 +234,8 @@ void bootmagic_lite(void) // We need multiple scans because debouncing can't be turned off. matrix_scan(); - wait_ms(DEBOUNCING_DELAY); - wait_ms(DEBOUNCING_DELAY); + wait_ms(DEBOUNCE); + wait_ms(DEBOUNCE); matrix_scan(); // If the Esc (matrix 0,0) is held down on power up, @@ -374,4 +374,3 @@ void suspend_wakeup_init_kb(void) backlight_set_suspend_state(false); #endif // RGB_BACKLIGHT_ENABLED } - diff --git a/keyboards/zeal65/config.h b/keyboards/zeal65/config.h index 224fce1f6..7217c6ed1 100644 --- a/keyboards/zeal65/config.h +++ b/keyboards/zeal65/config.h @@ -42,7 +42,7 @@ #define DIODE_DIRECTION COL2ROW // Set 0 if debouncing isn't needed -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zinc/rev1/config.h b/keyboards/zinc/rev1/config.h index 370b5c203..c8560233d 100644 --- a/keyboards/zinc/rev1/config.h +++ b/keyboards/zinc/rev1/config.h @@ -27,7 +27,7 @@ along with this program. If not, see . #define DEVICE_VER 0x0001 #define MANUFACTURER monksoffunk #define PRODUCT zinc rev.1 -#define DESCRIPTION A split keyboard +#define DESCRIPTION A split keyboard #define PREVENT_STUCK_MODIFIERS #define TAPPING_FORCE_HOLD @@ -59,7 +59,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zinc/reva/config.h b/keyboards/zinc/reva/config.h index f4277f713..6ae12d54c 100644 --- a/keyboards/zinc/reva/config.h +++ b/keyboards/zinc/reva/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define DEVICE_VER 0x0001 #define MANUFACTURER monksoffunk #define PRODUCT zinc rev.A -#define DESCRIPTION A split keyboard +#define DESCRIPTION A split keyboard #define PREVENT_STUCK_MODIFIERS #define TAPPING_FORCE_HOLD @@ -56,7 +56,7 @@ along with this program. If not, see . // #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/zlant/config.h b/keyboards/zlant/config.h index 8732a6d37..a6b5227d6 100755 --- a/keyboards/zlant/config.h +++ b/keyboards/zlant/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE -- cgit v1.2.3-70-g09d2 From 09968ba035f3bfa4df5b1d142dddfa669aefb2d7 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Fri, 7 Jun 2019 19:02:05 -0500 Subject: Fixing OLED Driver for 128x64 displays (#6085) --- docs/feature_oled_driver.md | 9 +++++---- drivers/oled/oled_driver.c | 6 +++++- drivers/oled/oled_driver.h | 47 ++++++++++++++++++++++++++++++++++++++++++--- 3 files changed, 54 insertions(+), 8 deletions(-) (limited to 'docs') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index fcc19515a..144b695b7 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -108,10 +108,11 @@ void oled_task_user(void) { |`OLED_DISPLAY_CUSTOM` |*Not defined* |Changes the display defines for use with custom displays.
Requires user to implement the below defines. | |`OLED_DISPLAY_WIDTH` |`128` |The width of the OLED display. | |`OLED_DISPLAY_HEIGHT` |`32` |The height of the OLED display. | -|`OLED_MATRIX_SIZE` |`512` |The local buffer size to allocate.
`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`| -|`OLED_BLOCK_TYPE` |`uint16_t` |The unsigned integer type to use for dirty rendering.| -|`OLED_BLOCK_COUNT` |`16` |The number of blocks the display is divided into for dirty rendering.
`(sizeof(OLED_BLOCK_TYPE) * 8)`| -|`OLED_BLOCK_SIZE` |`32` |The size of each block for dirty rendering
`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`| +|`OLED_MATRIX_SIZE` |`512` |The local buffer size to allocate.
`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`. | +|`OLED_BLOCK_TYPE` |`uint16_t` |The unsigned integer type to use for dirty rendering. | +|`OLED_BLOCK_COUNT` |`16` |The number of blocks the display is divided into for dirty rendering.
`(sizeof(OLED_BLOCK_TYPE) * 8)`. | +|`OLED_BLOCK_SIZE` |`32` |The size of each block for dirty rendering
`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`. | +|`OLED_COM_PINS` |`COM_PINS_SEQ` |How the SSD1306 chip maps it's memory to display.
Options are `COM_PINS_SEQ`, `COM_PINS_ALT`, `COM_PINS_SEQ_LR`, & `COM_PINS_ALT_LR`. | |`OLED_SOURCE_MAP` |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering. | |`OLED_TARGET_MAP` |`{ 24, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering. | diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c index 96ea58ccb..643e52894 100644 --- a/drivers/oled/oled_driver.c +++ b/drivers/oled/oled_driver.c @@ -63,6 +63,10 @@ along with this program. If not, see . #define COM_SCAN_DEC 0xC8 #define DISPLAY_OFFSET 0xD3 #define COM_PINS 0xDA +#define COM_PINS_SEQ 0x02 +#define COM_PINS_ALT 0x12 +#define COM_PINS_SEQ_LR 0x22 +#define COM_PINS_ALT_LR 0x32 // Timing & Driving Commands #define DISPLAY_CLOCK 0xD5 @@ -182,7 +186,7 @@ bool oled_init(uint8_t rotation) { static const uint8_t PROGMEM display_setup2[] = { I2C_CMD, - COM_PINS, 0x02, + COM_PINS, OLED_COM_PINS, CONTRAST, 0x8F, PRE_CHARGE_PERIOD, 0xF1, VCOM_DETECT, 0x40, diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index ec07f1d9b..abbdde57e 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -24,17 +24,39 @@ along with this program. If not, see . // Expected user to implement the necessary defines #elif defined(OLED_DISPLAY_128X64) // Double height 128x64 +#ifndef OLED_DISPLAY_WIDTH #define OLED_DISPLAY_WIDTH 128 +#endif +#ifndef OLED_DISPLAY_HEIGHT #define OLED_DISPLAY_HEIGHT 64 +#endif +#ifndef OLED_MATRIX_SIZE #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed) - #define OLED_BLOCK_TYPE uint32_t +#endif +#ifndef OLED_BLOCK_TYPE + #define OLED_BLOCK_TYPE uint16_t +#endif +#ifndef OLED_BLOCK_COUNT #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed) +#endif +#ifndef OLED_BLOCK_SIZE #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) +#endif +#ifndef OLED_COM_PINS + #define OLED_COM_PINS COM_PINS_ALT +#endif // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode - #define OLED_SOURCE_MAP { 32, 40, 48, 56 } - #define OLED_TARGET_MAP { 24, 16, 8, 0 } +#ifndef OLED_SOURCE_MAP + #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } +#endif +#ifndef OLED_TARGET_MAP + #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 } +#endif + // If OLED_BLOCK_TYPE is uint32_t, these tables would look like: + // #define OLED_SOURCE_MAP { 32, 40, 48, 56 } + // #define OLED_TARGET_MAP { 24, 16, 8, 0 } // If OLED_BLOCK_TYPE is uint16_t, these tables would look like: // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } // #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 } @@ -43,17 +65,36 @@ along with this program. If not, see . // #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 } #else // defined(OLED_DISPLAY_128X64) // Default 128x32 +#ifndef OLED_DISPLAY_WIDTH #define OLED_DISPLAY_WIDTH 128 +#endif +#ifndef OLED_DISPLAY_HEIGHT #define OLED_DISPLAY_HEIGHT 32 +#endif +#ifndef OLED_MATRIX_SIZE #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) +#endif +#ifndef OLED_BLOCK_TYPE #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only +#endif +#ifndef OLED_BLOCK_COUNT #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed) +#endif +#ifndef OLED_BLOCK_SIZE #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) +#endif +#ifndef OLED_COM_PINS + #define OLED_COM_PINS COM_PINS_SEQ +#endif // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode +#ifndef OLED_SOURCE_MAP #define OLED_SOURCE_MAP { 0, 8, 16, 24 } +#endif +#ifndef OLED_TARGET_MAP #define OLED_TARGET_MAP { 24, 16, 8, 0 } +#endif // If OLED_BLOCK_TYPE is uint8_t, these tables would look like: // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } // #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 } -- cgit v1.2.3-70-g09d2 From bba5c09b23208f7c70b1062b695a5b3df492b329 Mon Sep 17 00:00:00 2001 From: Chris Scheib Date: Tue, 11 Jun 2019 17:42:53 -0400 Subject: [Docs] Update feature_rgb_matrix.md (#6117) * Update feature_rgb_matrix.md fix indentation on code comments * Update feature_rgb_matrix.md more formatting changes, missed these the first time --- docs/feature_rgb_matrix.md | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'docs') diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 8f0cd12b3..916fcdce0 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -42,11 +42,11 @@ Define these arrays listing all the LEDs in your `.c`: ```C const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ {0, C1_3, C2_3, C3_3}, .... } @@ -93,11 +93,11 @@ Define these arrays listing all the LEDs in your `.c`: ```C const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ {0, B_1, A_1, C_1}, .... } -- cgit v1.2.3-70-g09d2 From e6a81133dd3d0d4076a08be76340f905fdbf7c7f Mon Sep 17 00:00:00 2001 From: "Michael F. Lamb" Date: Tue, 11 Jun 2019 15:27:17 -0700 Subject: Add SH1106 OLED support (#5787) * modify oled_driver to support SH1106 also: - improve mechanism to specify which OLED IC we use - comment calc_bounds() - give OLED_COLUMN_OFFSET a default value - inline comment re: OLED MEMORY_MODE and SH1106 - update docs/feature_oled_driver.h for SH1106 support and related changes - docs: OLED: note we have tested SSD1306 on ARM boards (per @XScorpion2) - define out MEMORY_MODE when using SH1106 OLED driver * document that SSD1306 128x64 on AVR works Per @XScorpion2: https://github.com/qmk/qmk_firmware/pull/5787#discussion_r291837842 --- docs/feature_oled_driver.md | 38 ++++++++++++++++++++++++++------------ drivers/oled/oled_driver.c | 31 ++++++++++++++++++++++++++++--- drivers/oled/oled_driver.h | 14 +++++++++++++- 3 files changed, 67 insertions(+), 16 deletions(-) (limited to 'docs') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 144b695b7..155dfa9d2 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -2,7 +2,17 @@ ## OLED Supported Hardware -128x32 OLED modules using SSD1306 driver IC over I2C. Supported on AVR based keyboards. Possible but untested hardware includes ARM based keyboards and other sized OLED modules using SSD1306 over I2C, such as 128x64. +OLED modules using SSD1306 or SH1106 driver ICs, communicating over I2C. +Tested combinations: + +| IC driver | Size | Keyboard Platform | Notes | +|-----------|--------|-------------------|--------------------------| +| SSD1306 | 128x32 | AVR | Primary support | +| SSD1306 | 128x64 | AVR | Verified working | +| SSD1306 | 128x32 | ARM | | +| SH1106 | 128x64 | AVR | No rotation or scrolling | + +Hardware configurations using ARM-based microcontrollers or different sizes of OLED modules may be compatible, but are untested. !> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses i2c to communication between sides this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. @@ -86,17 +96,17 @@ void oled_task_user(void) { ## Basic Configuration -|Define |Default |Description | -|-----------------------|---------------|------------------------------------------------| -|`OLED_DISPLAY_ADDRESS` |`0x3C` |The i2c address of the OLED Display | -|`OLED_FONT_H` |`"glcdfont.c"` |The font code file to use for custom fonts | -|`OLED_FONT_START` |`0` |The starting characer index for custom fonts | -|`OLED_FONT_END` |`224` |The ending characer index for custom fonts | -|`OLED_FONT_WIDTH` |`6` |The font width | -|`OLED_FONT_HEIGHT` |`8` |The font height (untested) | -|`OLED_DISABLE_TIMEOUT` |*Not defined* |Disables the built in OLED timeout feature. Useful when implementing custom timeout rules.| - - +| Define | Default | Description | +|------------------------|-------------------|----------------------------------------------------------------------------------------------------------------------------| +| `OLED_DISPLAY_ADDRESS` | `0x3C` | The i2c address of the OLED Display | +| `OLED_FONT_H` | `"glcdfont.c"` | The font code file to use for custom fonts | +| `OLED_FONT_START` | `0` | The starting characer index for custom fonts | +| `OLED_FONT_END` | `224` | The ending characer index for custom fonts | +| `OLED_FONT_WIDTH` | `6` | The font width | +| `OLED_FONT_HEIGHT` | `8` | The font height (untested) | +| `OLED_DISABLE_TIMEOUT` | *Not defined* | Disables the built in OLED timeout feature. Useful when implementing custom timeout rules. | +| `OLED_IC` | `OLED_IC_SSD1306` | Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller. | +| `OLED_COLUMN_OFFSET` | `0` | (SH1106 only.) Shift output to the right this many pixels.
Useful for 128x64 displays centered on a 132x64 SH1106 IC. | ## 128x64 & Custom sized OLED Displays @@ -119,6 +129,8 @@ void oled_task_user(void) { ### 90 Degree Rotation - Technical Mumbo Jumbo +!> Rotation is unsupported on the SH1106. + ```C // OLED Rotation enum values are flags typedef enum { @@ -250,6 +262,8 @@ uint8_t oled_max_chars(void); uint8_t oled_max_lines(void); ``` +!> Scrolling and rotation are unsupported on the SH1106. + ## SSD1306.h driver conversion guide |Old API |Recommended New API | diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c index 643e52894..a54f5fadc 100644 --- a/drivers/oled/oled_driver.c +++ b/drivers/oled/oled_driver.c @@ -33,6 +33,8 @@ along with this program. If not, see . #endif // defined(__AVR__) // Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf +// for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf + // Fundamental Commands #define CONTRAST 0x81 #define DISPLAY_ALL_ON 0xA5 @@ -40,6 +42,7 @@ along with this program. If not, see . #define NORMAL_DISPLAY 0xA6 #define DISPLAY_ON 0xAF #define DISPLAY_OFF 0xAE +#define NOP 0xE3 // Scrolling Commands #define ACTIVATE_SCROLL 0x2F @@ -53,6 +56,9 @@ along with this program. If not, see . #define MEMORY_MODE 0x20 #define COLUMN_ADDR 0x21 #define PAGE_ADDR 0x22 +#define PAM_SETCOLUMN_LSB 0x00 +#define PAM_SETCOLUMN_MSB 0x10 +#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 // Hardware Configuration Commands #define DISPLAY_START_LINE 0x40 @@ -158,7 +164,11 @@ bool oled_init(uint8_t rotation) { DISPLAY_OFFSET, 0x00, DISPLAY_START_LINE | 0x00, CHARGE_PUMP, 0x14, - MEMORY_MODE, 0x00, }; // Horizontal addressing mode +#if (OLED_IC != OLED_IC_SH1106) + // MEMORY_MODE is unsupported on SH1106 (Page Addressing only) + MEMORY_MODE, 0x00, // Horizontal addressing mode +#endif + }; if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) { print("oled_init cmd set 1 failed\n"); return false; @@ -219,10 +229,25 @@ void oled_clear(void) { static void calc_bounds(uint8_t update_start, uint8_t* cmd_array) { - cmd_array[1] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH; - cmd_array[4] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH; + // Calculate commands to set memory addressing bounds. + uint8_t start_page = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH; + uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH; +#if (OLED_IC == OLED_IC_SH1106) + // Commands for Page Addressing Mode. Sets starting page and column; has no end bound. + // Column value must be split into high and low nybble and sent as two commands. + cmd_array[0] = PAM_PAGE_ADDR | start_page; + cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f); + cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f); + cmd_array[3] = NOP; + cmd_array[4] = NOP; + cmd_array[5] = NOP; +#else + // Commands for use in Horizontal Addressing mode. + cmd_array[1] = start_column; + cmd_array[4] = start_page; cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1]; cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1; +#endif } static void calc_bounds_90(uint8_t update_start, uint8_t* cmd_array) diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index abbdde57e..03dda2e64 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -19,6 +19,9 @@ along with this program. If not, see . #include #include +// an enumeration of the chips this driver supports +#define OLED_IC_SSD1306 0 +#define OLED_IC_SH1106 1 #if defined(OLED_DISPLAY_CUSTOM) // Expected user to implement the necessary defines @@ -100,7 +103,16 @@ along with this program. If not, see . // #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 } #endif // defined(OLED_DISPLAY_CUSTOM) -// Address to use for tthe i2d oled communication +#if !defined(OLED_IC) + #define OLED_IC OLED_IC_SSD1306 +#endif + +// the column address corresponding to the first column in the display hardware +#if !defined(OLED_COLUMN_OFFSET) + #define OLED_COLUMN_OFFSET 0 +#endif + +// Address to use for the i2c oled communication #if !defined(OLED_DISPLAY_ADDRESS) #define OLED_DISPLAY_ADDRESS 0x3C #endif -- cgit v1.2.3-70-g09d2 From 6bdcbfb25ae068d9f5351af0f7c6a03385020661 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Tue, 18 Jun 2019 12:37:17 +1000 Subject: Fix backlight breathing on C6 (#6102) * Fix backlight breathing on C6 * Account for ATmega32A's single TIMSK register (MT40) * Document hardware PWM on D4 for ATmega32A * Add C6 and D4 to BACKLIGHT_PIN description --- docs/config_options.md | 2 +- docs/feature_backlight.md | 15 ++++++++------- quantum/quantum.c | 48 ++++++++++++++++++++++++++++------------------- 3 files changed, 38 insertions(+), 27 deletions(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index f4035809a..55d25d4c8 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -76,7 +76,7 @@ This is a C header file that is one of the first things included, and will persi * `#define B7_AUDIO` * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO) * `#define BACKLIGHT_PIN B7` - * pin of the backlight - B5, B6, B7 use PWM, others use softPWM + * pin of the backlight - `B5`, `B6`, `B7` and `C6` (and `D4` on ATmega32A) use hardware PWM, others use software implementation * `#define BACKLIGHT_LEVELS 3` * number of levels your backlight will have (maximum 15 excluding off) * `#define BACKLIGHT_BREATHING` diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index 048d75390..5a21a6790 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -34,13 +34,14 @@ Hardware PWM is only supported on certain pins of the MCU, so if the backlightin Hardware PWM is supported according to the following table: -| Backlight Pin | Hardware timer | -|---------------|----------------| -|`B5` | Timer 1 | -|`B6` | Timer 1 | -|`B7` | Timer 1 | -|`C6` | Timer 3 | -| other | Software PWM | +| Backlight Pin | Hardware timer | +|---------------|-------------------------| +|`B5` | Timer 1 | +|`B6` | Timer 1 | +|`B7` | Timer 1 | +|`C6` | Timer 3 | +|`D4` | Timer 1 (ATmega32A only)| +| other | Software PWM | The [audio feature](feature_audio.md) also uses hardware timers. Please refer to the following table to know what hardware timer the software PWM will use depending on the audio configuration: diff --git a/quantum/quantum.c b/quantum/quantum.c index 23263b700..36b7942d5 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -1027,35 +1027,49 @@ void matrix_scan_quantum() { # define TCCRxB TCCR1B # define COMxx1 COM1C1 # define OCRxx OCR1C +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == B6 # define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1B1 # define OCRxx OCR1B +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == B5 # define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1A1 # define OCRxx OCR1A +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == C6 # define HARDWARE_PWM # define TCCRxA TCCR3A # define TCCRxB TCCR3B -# define COMxx1 COM1A1 +# define COMxx1 COM3A1 # define OCRxx OCR3A +# define TIMERx_OVF_vect TIMER3_OVF_vect +# define TOIEx TOIE3 # define ICRx ICR3 +# define TIMSKx TIMSK3 #elif defined(__AVR_ATmega32A__) && BACKLIGHT_PIN == D4 # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1B1 # define OCRxx OCR1B +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 -# define TIMSK1 TIMSK +# define TIMSKx TIMSK1 #else # if !defined(BACKLIGHT_CUSTOM_DRIVER) # if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO) @@ -1066,15 +1080,15 @@ void matrix_scan_quantum() { # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define OCRxx OCR1A -# define OCRxAH OCR1AH -# define OCRxAL OCR1AL # define TIMERx_COMPA_vect TIMER1_COMPA_vect # define TIMERx_OVF_vect TIMER1_OVF_vect # define OCIExA OCIE1A # define TOIEx TOIE1 # define ICRx ICR1 -# ifndef TIMSK -# define TIMSK TIMSK1 +# if defined(__AVR_ATmega32A__) // This MCU has only one TIMSK register +# define TIMSKx TIMSK +# else +# define TIMSKx TIMSK1 # endif # elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO) #pragma message "Using hardware timer 3 with software PWM" @@ -1084,16 +1098,12 @@ void matrix_scan_quantum() { # define TCCRxA TCCR3A # define TCCRxB TCCR3B # define OCRxx OCR3A -# define OCRxAH OCR3AH -# define OCRxAL OCR3AL # define TIMERx_COMPA_vect TIMER3_COMPA_vect # define TIMERx_OVF_vect TIMER3_OVF_vect # define OCIExA OCIE3A # define TOIEx TOIE3 # define ICRx ICR1 -# ifndef TIMSK -# define TIMSK TIMSK3 -# endif +# define TIMSKx TIMSK3 # else #pragma message "Audio in use - using pure software PWM" #define NO_HARDWARE_PWM @@ -1274,8 +1284,8 @@ void backlight_set(uint8_t level) { if (level == 0) { #ifdef BACKLIGHT_PWM_TIMER if (OCRxx) { - TIMSK &= ~(_BV(OCIExA)); - TIMSK &= ~(_BV(TOIEx)); + TIMSKx &= ~(_BV(OCIExA)); + TIMSKx &= ~(_BV(TOIEx)); FOR_EACH_LED( backlight_off(backlight_pin); ) @@ -1287,8 +1297,8 @@ void backlight_set(uint8_t level) { } else { #ifdef BACKLIGHT_PWM_TIMER if (!OCRxx) { - TIMSK |= _BV(OCIExA); - TIMSK |= _BV(TOIEx); + TIMSKx |= _BV(OCIExA); + TIMSKx |= _BV(TOIEx); } #else // Turn on PWM control of backlight pin @@ -1325,11 +1335,11 @@ bool is_breathing(void) { #else bool is_breathing(void) { - return !!(TIMSK1 & _BV(TOIE1)); + return !!(TIMSKx & _BV(TOIEx)); } -#define breathing_interrupt_enable() do {TIMSK1 |= _BV(TOIE1);} while (0) -#define breathing_interrupt_disable() do {TIMSK1 &= ~_BV(TOIE1);} while (0) +#define breathing_interrupt_enable() do {TIMSKx |= _BV(TOIEx);} while (0) +#define breathing_interrupt_disable() do {TIMSKx &= ~_BV(TOIEx);} while (0) #endif #define breathing_min() do {breathing_counter = 0;} while (0) @@ -1411,7 +1421,7 @@ void breathing_task(void) /* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run * about 244 times per second. */ -ISR(TIMER1_OVF_vect) +ISR(TIMERx_OVF_vect) #endif { uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; -- cgit v1.2.3-70-g09d2 From 810c8db7706f40f0436555fdffbaf849dc0a5641 Mon Sep 17 00:00:00 2001 From: Danny Date: Thu, 20 Jun 2019 01:02:20 -0400 Subject: Set default I2C clock speed to 100kHz for split_common (#6161) * Set default I2C clock rate for split_common boards to 100kHz Default from I2C driver is 400kHz. * Update documentation for setting I2C clock speed --- docs/config_options.md | 4 ++-- quantum/split_common/post_config.h | 4 ++++ 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index 55d25d4c8..7418e8dbf 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -93,8 +93,8 @@ This is a C header file that is one of the first things included, and will persi * key combination that allows the use of magic commands (useful for debugging) * `#define USB_MAX_POWER_CONSUMPTION` * sets the maximum power (in mA) over USB for the device (default: 500) -* `#define SCL_CLOCK 100000L` - * sets the SCL_CLOCK speed for split keyboards. The default is `100000L` but some boards can be set to `400000L`. +* `#define F_SCL 100000L` + * sets the I2C clock rate speed for keyboards using I2C. The default is `400000L`, except for keyboards using `split_common`, where the default is `100000L`. ## Features That Can Be Disabled diff --git a/quantum/split_common/post_config.h b/quantum/split_common/post_config.h index 0e59df3d0..ff0fc5e19 100644 --- a/quantum/split_common/post_config.h +++ b/quantum/split_common/post_config.h @@ -4,6 +4,10 @@ #define RGBLIGHT_SPLIT #endif + #ifndef F_SCL + #define F_SCL 100000UL // SCL frequency + #endif + #else // use serial // When using serial, the user must define RGBLIGHT_SPLIT explicitly // in config.h as needed. -- cgit v1.2.3-70-g09d2 From 317b8095647e208a7ac1ecf6b110051ca46553a8 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Thu, 20 Jun 2019 15:33:39 +1000 Subject: Fix breathing always on for soft PWM (#5983) * Fix breathing always on for soft PWM * Remove reference to hardware PWM pins in BACKLIGHT_BREATHING description Now, breathing will only be unsupported when Timers 1 and 3 are both used by Audio * Document BACKLIGHT_ON_STATE and its purpose --- docs/config_options.md | 2 +- docs/feature_backlight.md | 10 ++++++++-- quantum/quantum.c | 17 ++++++++++------- 3 files changed, 19 insertions(+), 10 deletions(-) (limited to 'docs') diff --git a/docs/config_options.md b/docs/config_options.md index 7418e8dbf..eb0a441cc 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -80,7 +80,7 @@ This is a C header file that is one of the first things included, and will persi * `#define BACKLIGHT_LEVELS 3` * number of levels your backlight will have (maximum 15 excluding off) * `#define BACKLIGHT_BREATHING` - * enables backlight breathing (only works with backlight pins B5, B6 and B7) + * enables backlight breathing * `#define BREATHING_PERIOD 6` * the length of one backlight "breath" in seconds * `#define DEBOUNCE 5` diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index 5a21a6790..b06db89e4 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -64,11 +64,17 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`: |Define |Default |Description | |---------------------|-------------|-------------------------------------------------------------------------------------------------------------| |`BACKLIGHT_PIN` |`B7` |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this| -|`BACKLIGHT_PINS` |*Not defined*|experimental: see below for more information| +|`BACKLIGHT_PINS` |*Not defined*|experimental: see below for more information | |`BACKLIGHT_LEVELS` |`3` |The number of brightness levels (maximum 15 excluding off) | |`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED) | -|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported | +|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported | |`BREATHING_PERIOD` |`6` |The length of one backlight "breath" in seconds | +|`BACKLIGHT_ON_STATE` |`0` |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low | + +## Backlight On State + +Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *low*. +Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case you must `#define BACKLIGHT_ON_STATE 1`, so that when the transistor is on, the pin is driven *high* instead. ## Multiple backlight pins diff --git a/quantum/quantum.c b/quantum/quantum.c index 36b7942d5..6530738b7 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -707,8 +707,9 @@ bool process_record_quantum(keyrecord_t *record) { #if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_BREATHING) case BL_BRTG: { - if (record->event.pressed) + if (record->event.pressed) { breathing_toggle(); + } return false; } #endif @@ -1148,13 +1149,13 @@ void backlight_off(uint8_t backlight_pin) { #define BACKLIGHT_PIN_INIT BACKLIGHT_PINS #endif -#define FOR_EACH_LED(x) \ +#define FOR_EACH_LED(x) \ for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) \ - { \ - uint8_t backlight_pin = backlight_pins[i]; \ + { \ + uint8_t backlight_pin = backlight_pins[i]; \ { \ - x \ - } \ + x \ + } \ } static const uint8_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PIN_INIT; @@ -1233,7 +1234,9 @@ ISR(TIMERx_COMPA_vect) { // this one triggers at F_CPU/65536 =~ 244 Hz ISR(TIMERx_OVF_vect) { #ifdef BACKLIGHT_BREATHING - breathing_task(); + if(is_breathing()) { + breathing_task(); + } #endif // for very small values of OCRxx (or backlight level) // we can't guarantee this whole code won't execute -- cgit v1.2.3-70-g09d2 From 1a442f9989c825cb42b41845658874f7f9e90ba7 Mon Sep 17 00:00:00 2001 From: lf Date: Mon, 24 Jun 2019 01:23:27 -0600 Subject: [Docs] Reword confusing description of `TO(layer)` (#6174) * Reword confusing description of `TO(layer)` * Update docs/keycodes.md Co-Authored-By: Drashna Jaelre --- docs/keycodes.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/keycodes.md b/docs/keycodes.md index 3ff87856e..bd4dd61a5 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -298,7 +298,7 @@ This is a reference only. Each group of keys links to the page documenting their |`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well. Where `mod` is a mods_bit. Mods can be viewed [here](https://docs.qmk.fm/#/feature_advanced_keycodes?id=mod-tap). Example Implementation: `LM(LAYER_1, MOD_LALT)`| |`LT(layer, kc)` |Turn on `layer` when held, `kc` when tapped | |`TG(layer)` |Toggle `layer` on or off | -|`TO(layer)` |Turn on `layer` when pressed | +|`TO(layer)` |Turns on `layer` and turns off all other layers, except the default layer | |`TT(layer)` |Normally acts like MO unless it's tapped multiple times, which toggles `layer` on | ## [Mouse Keys](feature_mouse_keys.md) -- cgit v1.2.3-70-g09d2 From c1c0cf73ce0ed4301d7f3d7af0b352d9385da896 Mon Sep 17 00:00:00 2001 From: shela Date: Mon, 1 Jul 2019 15:32:59 +0900 Subject: fix typo --- docs/feature_advanced_keycodes.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'docs') diff --git a/docs/feature_advanced_keycodes.md b/docs/feature_advanced_keycodes.md index a6ddf458c..f748ccd70 100644 --- a/docs/feature_advanced_keycodes.md +++ b/docs/feature_advanced_keycodes.md @@ -256,10 +256,10 @@ If you press a Mod Tap key, tap another key (press and release) and then release For Instance: -- `SHFT_T(KC_A)` Down +- `SFT_T(KC_A)` Down - `KC_X` Down - `KC_X` Up -- `SHFT_T(KC_A)` Up +- `SFT_T(KC_A)` Up Normally, if you do all this within the `TAPPING_TERM` (default: 200ms) this will be registered as `ax` by the firmware and host system. With permissive hold enabled, this modifies how this is handled by considering the Mod Tap keys as a Mod if another key is tapped, and would registered as `X` (`SHIFT`+`x`). @@ -279,9 +279,9 @@ Setting `Ignore Mod Tap Interrupt` requires holding both keys for the `TAPPING_ For Instance: -- `SHFT_T(KC_A)` Down +- `SFT_T(KC_A)` Down - `KC_X` Down -- `SHFT_T(KC_A)` Up +- `SFT_T(KC_A)` Up - `KC_X` Up Normally, this would send `X` (`SHIFT`+`x`). With `Ignore Mod Tap Interrupt` enabled, holding both keys are required for the `TAPPING_TERM` to register the hold action. A quick tap will output `ax` in this case, while a hold on both will still output `X` (`SHIFT`+`x`). @@ -303,11 +303,11 @@ When the user holds a key after tap, this repeats the tapped key rather to hold Example: -- SHFT_T(KC_A) Down -- SHFT_T(KC_A) Up -- SHFT_T(KC_A) Down +- SFT_T(KC_A) Down +- SFT_T(KC_A) Up +- SFT_T(KC_A) Down - wait more than tapping term... -- SHFT_T(KC_A) Up +- SFT_T(KC_A) Up With default settings, `a` will be sent on the first release, then `a` will be sent on the second press allowing the computer to trigger its auto repeat function. -- cgit v1.2.3-70-g09d2 From d16db6936715a98b6ae769463d5ccafab25b7203 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sat, 6 Jul 2019 23:00:05 -0500 Subject: Added mod carry over from press to release. (#5866) Update docs/feature_space_cadet.md Co-Authored-By: fauxpark --- docs/feature_space_cadet.md | 1 + quantum/process_keycode/process_space_cadet.c | 12 ++++++++++++ 2 files changed, 13 insertions(+) (limited to 'docs') diff --git a/docs/feature_space_cadet.md b/docs/feature_space_cadet.md index 075578522..41a44627e 100644 --- a/docs/feature_space_cadet.md +++ b/docs/feature_space_cadet.md @@ -43,6 +43,7 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe |`LAPO_KEYS` |`KC_LALT, KC_LSFT, KC_9` |Send `KC_LALT` when held, the mod `KC_LSFT` with the key `KC_9` when tapped. | |`RAPC_KEYS` |`KC_RALT, KC_RSFT, KC_0` |Send `KC_RALT` when held, the mod `KC_RSFT` with the key `KC_0` when tapped. | |`SFTENT_KEYS` |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped. | +|`SPACE_CADET_MODIFIER_CARRYOVER` |*Not defined* |Store current modifiers before the hold mod is pressed and use them with the tap mod and keycode. Useful for when you frequently release a modifier before triggering Space Cadet. | ## Obsolete Configuration diff --git a/quantum/process_keycode/process_space_cadet.c b/quantum/process_keycode/process_space_cadet.c index 089199eee..c8721d446 100644 --- a/quantum/process_keycode/process_space_cadet.c +++ b/quantum/process_keycode/process_space_cadet.c @@ -81,11 +81,17 @@ static uint8_t sc_last = 0; static uint16_t sc_timer = 0; +#ifdef SPACE_CADET_MODIFIER_CARRYOVER +static uint8_t sc_mods = 0; +#endif void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, uint8_t keycode) { if (record->event.pressed) { sc_last = holdMod; sc_timer = timer_read (); +#ifdef SPACE_CADET_MODIFIER_CARRYOVER + sc_mods = get_mods(); +#endif if (IS_MOD(holdMod)) { register_mods(MOD_BIT(holdMod)); } @@ -100,7 +106,13 @@ void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, u register_mods(MOD_BIT(tapMod)); } } +#ifdef SPACE_CADET_MODIFIER_CARRYOVER + set_weak_mods(sc_mods); +#endif tap_code(keycode); +#ifdef SPACE_CADET_MODIFIER_CARRYOVER + clear_weak_mods(); +#endif if (IS_MOD(tapMod)) { unregister_mods(MOD_BIT(tapMod)); } -- cgit v1.2.3-70-g09d2 From 6e6d079dd21f766191f60db062fae8889623ded1 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Mon, 8 Jul 2019 08:28:31 -0500 Subject: Updated OLED Docs with notes about screen timeout. (#6276) * Updated OLED Docs with notes about screen timeout. * Update docs/feature_oled_driver.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- docs/feature_oled_driver.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 155dfa9d2..503e43828 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -14,7 +14,7 @@ Tested combinations: Hardware configurations using ARM-based microcontrollers or different sizes of OLED modules may be compatible, but are untested. -!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses i2c to communication between sides this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. +!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses I2C to communicate between sides, this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. In addition, the display timeout system to reduce OLED burn-in also uses split common to detect keypresses, so you will need to implement custom timeout logic for non-split common keyboards. ## Usage -- cgit v1.2.3-70-g09d2 From ecf0612cc8ed9458e30f7feafe6b3f7bb6985788 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 12 Jul 2019 04:33:55 +1000 Subject: [Docs] Clarify the rules.mk setup for Unicode (#6286) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Clarify the rules.mk setup for Unicode * code point Co-Authored-By: Konstantin Đorđević * Remove "your" Co-Authored-By: Konstantin Đorđević * Undo a line change Co-Authored-By: Konstantin Đorđević * dot the comma Co-Authored-By: Konstantin Đorđević * Update docs/feature_unicode.md Co-Authored-By: Konstantin Đorđević --- docs/feature_unicode.md | 68 ++++++++++++++++++++++++++++++++----------------- 1 file changed, 45 insertions(+), 23 deletions(-) (limited to 'docs') diff --git a/docs/feature_unicode.md b/docs/feature_unicode.md index 778cdc69c..bd1f4fa5a 100644 --- a/docs/feature_unicode.md +++ b/docs/feature_unicode.md @@ -1,28 +1,44 @@ # Unicode Support -There are three Unicode keymap definition methods available in QMK: +Unicode characters can be input straight from your keyboard! There are some limitations, however. -## `UNICODE_ENABLE` +QMK has three different methods for enabling Unicode input and defining keycodes: -Supports Unicode up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. The keycode function is `UC(c)` in the keymap, where _c_ is the code point's number (preferably hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`. +## Basic Unicode -## `UNICODEMAP_ENABLE` +This method supports Unicode code points up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. -Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(i)`, where _i_ is an array index into the mapping table. The table may contain at most 16384 entries. +Add the following to your `rules.mk`: -You may want to have an enum to make referencing easier. So, you could add something like this to your keymap file: +```make +UNICODE_ENABLE = yes +``` + +Then add `UC(c)` keycodes to your keymap, where _c_ is the code point (preferably in hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`. + +## Unicode Map + +This method supports all possible code points (up to `0x10FFFF`); however, you need to maintain a separate mapping table in your keymap file, which may contain at most 16384 entries. + +Add the following to your `rules.mk`: + +```make +UNICODEMAP_ENABLE = yes +``` + +Then add `X(i)` keycodes to your keymap, where _i_ is an array index into the mapping table: ```c enum unicode_names { - BANG, - IRONY, - SNEK, + BANG, + IRONY, + SNEK }; const uint32_t PROGMEM unicode_map[] = { - [BANG] = 0x203D, // ‽ - [IRONY] = 0x2E2E, // ⸮ - [SNEK] = 0x1F40D, // 🐍 + [BANG] = 0x203D, // ‽ + [IRONY] = 0x2E2E, // ⸮ + [SNEK] = 0x1F40D, // 🐍 }; ``` @@ -30,27 +46,33 @@ Then you can use `X(BANG)`, `X(SNEK)` etc. in your keymap. ### Lower and Upper Case -Characters often come in lower and upper case pairs, for example: å, Å. To make inputting these characters easier, you can use `XP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear. +Characters often come in lower and upper case pairs, such as å and Å. To make inputting these characters easier, you can use `XP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear. -This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `XP`. This blends Unicode keys in with regular alphas. +This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `XP()`. This helps blend Unicode keys in with regular alphas. Due to keycode size constraints, _i_ and _j_ can each only refer to one of the first 128 characters in your `unicode_map`. In other words, 0 ≤ _i_ ≤ 127 and 0 ≤ _j_ ≤ 127. This is enough for most use cases, but if you'd like to customize the index calculation, you can override the [`unicodemap_index()`](https://github.com/qmk/qmk_firmware/blob/71f640d47ee12c862c798e1f56392853c7b1c1a8/quantum/process_keycode/process_unicodemap.c#L40) function. This also allows you to, say, check Ctrl instead of Shift/Caps. -## `UCIS_ENABLE` +## UCIS + +This method also supports all possible code points. As with the Unicode Map method, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you have to create a custom keycode or function that invokes this functionality. -Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you have to add a keycode or function that calls `qk_ucis_start()`. Once this function has been called, you can type the corresponding mnemonic for your character, then hit Space or Enter to complete it, or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode character inserted. +Add the following to your `rules.mk`: + +```make +UCIS_ENABLE = yes +``` -For instance, you could define a table like this in your keymap file: +Then define a table like this in your keymap file: ```c const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE( - UCIS_SYM("poop", 0x1F4A9), // 💩 - UCIS_SYM("rofl", 0x1F923), // 🤣 - UCIS_SYM("kiss", 0x1F619) // 😙 + UCIS_SYM("poop", 0x1F4A9), // 💩 + UCIS_SYM("rofl", 0x1F923), // 🤣 + UCIS_SYM("kiss", 0x1F619) // 😙 ); ``` -To use it, call `qk_ucis_start()`, then type "rofl" and hit Enter. QMK should erase the "rofl" text and insert the laughing emoji. +To use it, call `qk_ucis_start()`. Then, type the mnemonic for the character (such as "rofl"), and hit Space or Enter. QMK should erase the "rofl" text and insert the laughing emoji. ### Customization @@ -68,7 +90,7 @@ Unicode input in QMK works by inputting a sequence of characters to the OS, sort The following input modes are available: -* **`UC_OSX`**: macOS built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with `UNICODEMAP`). +* **`UC_OSX`**: macOS built-in Unicode hex input. Supports code points up to `0xFFFF` (`0x10FFFF` with Unicode Map). To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar. By default, this mode uses the left Option key (`KC_LALT`) for Unicode input, but this can be changed by defining [`UNICODE_KEY_OSX`](#input-key-configuration) with another keycode. @@ -112,7 +134,7 @@ You can also switch the input mode by calling `set_unicode_input_mode(x)` in you ```c void eeconfig_init_user(void) { - set_unicode_input_mode(UC_LNX); + set_unicode_input_mode(UC_LNX); } ``` -- cgit v1.2.3-70-g09d2 From 663ca6ba9db59e05f1ba057ad4c0e3ff3cb0cff1 Mon Sep 17 00:00:00 2001 From: Phil Schalm Date: Fri, 12 Jul 2019 05:42:21 -0700 Subject: Documentation: Newbs Flashing: Hightlight that sudo may be needed (#6300) * Hightlight that sudo may be needed Also added "dfu-programmer: no device present" in so that anyone searching for that particular error can hopefully find the page. * Use new style of indicating a warning * Indicate that the FAQ should be read instead of blindly using sudo --- docs/newbs_flashing.md | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'docs') diff --git a/docs/newbs_flashing.md b/docs/newbs_flashing.md index a985e5d2b..fa0a5e2ba 100644 --- a/docs/newbs_flashing.md +++ b/docs/newbs_flashing.md @@ -127,9 +127,7 @@ Once it does this, you'll want to reset the controller. It should then show out >>> dfu-programmer atmega32u4 reset ``` -If you have any issues with this, you may need to this: - - sudo make ::dfu +?> If you have any issues with this - such as `dfu-programmer: no device present` - please see the [Frequently Asked Build Questions](faq_build.md). #### DFU commands -- cgit v1.2.3-70-g09d2