From f70f45ee677a2a39a759052a356e0c5d82e25424 Mon Sep 17 00:00:00 2001
From: James Laird-Wah <james@laird-wah.net>
Date: Fri, 28 Sep 2018 00:40:18 +1000
Subject: RGB Matrix refactoring to open up for new drivers (#3913)

* rgb_matrix: use a driver ops struct

This is intended to avoid #ifdef proliferation on adding more drivers,
eg. model01, which use different architectures.

* rgb_matrix: document driver struct members

* rgb_matrix: remove unused LED testing code

* rgb_matrix: don't build into IS31x drivers unless being used

* rgb_matrix: refactor make config options

This ensures that the necessary files are included for any custom
RGB_MATRIX_ENABLE value, without having to add entries here for specific
boards. This particularly affects model01 because its controller is
integrated and won't be used anywhere else, so it's preferable not to
put it in common_features.mk.

This now validates the value of RGB_MATRIX_ENABLE.

It was necessary to fix an error in ergodox_ez rules.mk using the wrong
comment separator, yielding an invalid value.

* IS31x drivers: don't write the control registers all the time

This is only needed when they are changed. This is done in init() and
board- or keymap-specific code is free to make further changes.

* rgb_matrix: move structs from chip drivers to rgb_matrix_drivers.c

This approach is specific to the rgb_matrix functionality, so keep it
neatly separated from the raw chip drivers.
---
 drivers/issi/is31fl3731.c | 1 -
 drivers/issi/is31fl3733.c | 3 +--
 2 files changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/issi/is31fl3731.c b/drivers/issi/is31fl3731.c
index 4d0d6b8a5..c9155f5a3 100644
--- a/drivers/issi/is31fl3731.c
+++ b/drivers/issi/is31fl3731.c
@@ -268,4 +268,3 @@ void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
         }
     }
 }
-
diff --git a/drivers/issi/is31fl3733.c b/drivers/issi/is31fl3733.c
index 4098b5468..c198ec517 100644
--- a/drivers/issi/is31fl3733.c
+++ b/drivers/issi/is31fl3733.c
@@ -24,10 +24,10 @@
 #include "wait.h"
 #endif
 
-#include "is31fl3733.h"
 #include <string.h>
 #include "i2c_master.h"
 #include "progmem.h"
+#include "rgb_matrix.h"
 
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
@@ -250,4 +250,3 @@ void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
         }
     }
 }
-
-- 
cgit v1.2.3-70-g09d2


From 13e166d9c42845e2622605e94d4a0c38fa5443a0 Mon Sep 17 00:00:00 2001
From: Wilba6582 <Wilba6582@users.noreply.github.com>
Date: Fri, 28 Sep 2018 00:40:44 +1000
Subject: RAMA U80-A, wilba.tech WT60-A, WT65-A, WT80-A, IS31FL3736 driver
 (#3925)

* Initial commit of RAMA U80-A

* Initial commit of RAMA U80-A

* Moved IS31FL3736 driver, minor cleanups

* Superficial stuff

* Review changes

* Refactored to use common code.
---
 drivers/issi/is31fl3736.c                          | 306 +++++++++++++++++++++
 drivers/issi/is31fl3736.h                          | 172 ++++++++++++
 keyboards/rama/readme.md                           |   2 +
 keyboards/rama/u80_a/config.h                      | 187 +++++++++++++
 keyboards/rama/u80_a/info.json                     |  13 +
 keyboards/rama/u80_a/keymaps/default/keymap.c      |  22 ++
 keyboards/rama/u80_a/readme.md                     |  15 +
 keyboards/rama/u80_a/rules.mk                      |  68 +++++
 keyboards/rama/u80_a/u80_a.c                       |  17 ++
 keyboards/rama/u80_a/u80_a.h                       |  43 +++
 keyboards/wilba_tech/wt60_a/config.h               | 187 +++++++++++++
 keyboards/wilba_tech/wt60_a/info.json              |  16 ++
 .../wt60_a/keymaps/ansi_split_bs_rshift/keymap.c   |  38 +++
 .../wilba_tech/wt60_a/keymaps/default/keymap.c     |  38 +++
 keyboards/wilba_tech/wt60_a/readme.md              |  15 +
 keyboards/wilba_tech/wt60_a/rules.mk               |  68 +++++
 keyboards/wilba_tech/wt60_a/wt60_a.c               |  17 ++
 keyboards/wilba_tech/wt60_a/wt60_a.h               |  52 ++++
 keyboards/wilba_tech/wt65_a/config.h               | 187 +++++++++++++
 keyboards/wilba_tech/wt65_a/info.json              |  13 +
 .../wilba_tech/wt65_a/keymaps/default/keymap.c     |  37 +++
 keyboards/wilba_tech/wt65_a/readme.md              |  15 +
 keyboards/wilba_tech/wt65_a/rules.mk               |  68 +++++
 keyboards/wilba_tech/wt65_a/wt65_a.c               |  17 ++
 keyboards/wilba_tech/wt65_a/wt65_a.h               |  41 +++
 keyboards/wilba_tech/wt80_a/config.h               | 187 +++++++++++++
 keyboards/wilba_tech/wt80_a/info.json              |  13 +
 .../wilba_tech/wt80_a/keymaps/default/keymap.c     |  22 ++
 keyboards/wilba_tech/wt80_a/readme.md              |  15 +
 keyboards/wilba_tech/wt80_a/rules.mk               |  68 +++++
 keyboards/wilba_tech/wt80_a/wt80_a.c               |  17 ++
 keyboards/wilba_tech/wt80_a/wt80_a.h               |  43 +++
 keyboards/wilba_tech/wt_main.c                     |  55 ++++
 keyboards/wilba_tech/wt_mono_backlight.c           | 116 ++++++++
 keyboards/wilba_tech/wt_mono_backlight.h           |  33 +++
 35 files changed, 2223 insertions(+)
 create mode 100644 drivers/issi/is31fl3736.c
 create mode 100644 drivers/issi/is31fl3736.h
 create mode 100644 keyboards/rama/u80_a/config.h
 create mode 100644 keyboards/rama/u80_a/info.json
 create mode 100644 keyboards/rama/u80_a/keymaps/default/keymap.c
 create mode 100644 keyboards/rama/u80_a/readme.md
 create mode 100644 keyboards/rama/u80_a/rules.mk
 create mode 100644 keyboards/rama/u80_a/u80_a.c
 create mode 100644 keyboards/rama/u80_a/u80_a.h
 create mode 100644 keyboards/wilba_tech/wt60_a/config.h
 create mode 100644 keyboards/wilba_tech/wt60_a/info.json
 create mode 100644 keyboards/wilba_tech/wt60_a/keymaps/ansi_split_bs_rshift/keymap.c
 create mode 100644 keyboards/wilba_tech/wt60_a/keymaps/default/keymap.c
 create mode 100644 keyboards/wilba_tech/wt60_a/readme.md
 create mode 100644 keyboards/wilba_tech/wt60_a/rules.mk
 create mode 100644 keyboards/wilba_tech/wt60_a/wt60_a.c
 create mode 100644 keyboards/wilba_tech/wt60_a/wt60_a.h
 create mode 100644 keyboards/wilba_tech/wt65_a/config.h
 create mode 100644 keyboards/wilba_tech/wt65_a/info.json
 create mode 100644 keyboards/wilba_tech/wt65_a/keymaps/default/keymap.c
 create mode 100644 keyboards/wilba_tech/wt65_a/readme.md
 create mode 100644 keyboards/wilba_tech/wt65_a/rules.mk
 create mode 100644 keyboards/wilba_tech/wt65_a/wt65_a.c
 create mode 100644 keyboards/wilba_tech/wt65_a/wt65_a.h
 create mode 100644 keyboards/wilba_tech/wt80_a/config.h
 create mode 100644 keyboards/wilba_tech/wt80_a/info.json
 create mode 100644 keyboards/wilba_tech/wt80_a/keymaps/default/keymap.c
 create mode 100644 keyboards/wilba_tech/wt80_a/readme.md
 create mode 100644 keyboards/wilba_tech/wt80_a/rules.mk
 create mode 100644 keyboards/wilba_tech/wt80_a/wt80_a.c
 create mode 100644 keyboards/wilba_tech/wt80_a/wt80_a.h
 create mode 100644 keyboards/wilba_tech/wt_main.c
 create mode 100644 keyboards/wilba_tech/wt_mono_backlight.c
 create mode 100644 keyboards/wilba_tech/wt_mono_backlight.h

(limited to 'drivers')

diff --git a/drivers/issi/is31fl3736.c b/drivers/issi/is31fl3736.c
new file mode 100644
index 000000000..c5d431097
--- /dev/null
+++ b/drivers/issi/is31fl3736.c
@@ -0,0 +1,306 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include "is31fl3736.h"
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+
+
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
+#define ISSI_PAGE_PWM 0x01        //PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
+#define ISSI_PAGE_FUNCTION 0x03   //PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 //PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
+#define ISSI_REG_RESET 0x11// PG3
+#define ISSI_REG_SWPULLUP 0x0F //PG3
+#define ISSI_REG_CSPULLUP 0x10 //PG3
+
+#ifndef ISSI_TIMEOUT
+  #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+  #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3736 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3736_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
+bool g_led_control_registers_update_required = false;
+
+void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+
+  #if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+        break;
+    }
+  #else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+  #endif
+}
+
+void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+    // assumes PG1 is already selected
+
+    // transmit PWM registers in 12 transfers of 16 bytes
+    // g_twi_transfer_buffer[] is 20 bytes
+
+    // iterate over the pwm_buffer contents at 16 byte intervals
+    for ( int i = 0; i < 192; i += 16 ) {
+        g_twi_transfer_buffer[0] = i;
+        // copy the data from i to i+15
+        // device will auto-increment register for data after the first byte
+        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+        for ( int j = 0; j < 16; j++ ) {
+            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+        }
+
+    #if ISSI_PERSISTENCE > 0
+      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+          break;
+      }
+    #else
+      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+    #endif
+    }
+}
+
+void IS31FL3736_init( uint8_t addr )
+{
+    // In order to avoid the LEDs being driven with garbage data
+    // in the LED driver's PWM registers, shutdown is enabled last.
+    // Set up the mode and other settings, clear the PWM registers,
+    // then disable software shutdown.
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG0
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    // Turn off all LEDs.
+    for ( int i = 0x00; i <= 0x17; i++ )
+    {
+        IS31FL3736_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG1
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    // Set PWM on all LEDs to 0
+    // No need to setup Breath registers to PWM as that is the default.
+    for ( int i = 0x00; i <= 0xBF; i++ )
+    {
+        IS31FL3736_write_register( addr, i, 0x00 );
+    }
+
+    // Unlock the command register.
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+    // Select PG3
+    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    // Set global current to maximum.
+    IS31FL3736_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    // Disable software shutdown.
+    IS31FL3736_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+
+    // Wait 10ms to ensure the device has woken up.
+    #ifdef __AVR__
+    _delay_ms( 10 );
+    #else
+    wait_ms(10);
+    #endif
+}
+
+void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+        is31_led led = g_is31_leds[index];
+
+        g_pwm_buffer[led.driver][led.r] = red;
+        g_pwm_buffer[led.driver][led.g] = green;
+        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+    {
+        IS31FL3736_set_color( i, red, green, blue );
+    }
+}
+
+void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+    is31_led led = g_is31_leds[index];
+
+    // IS31FL3733
+    // The PWM register for a matrix position (0x00 to 0xBF) can be
+    // divided by 8 to get the LED control register (0x00 to 0x17),
+    // then mod 8 to get the bit position within that register.
+
+    // IS31FL3736
+    // The PWM register for a matrix position (0x00 to 0xBF) is interleaved, so:
+    // A1=0x00 A2=0x02 A3=0x04 A4=0x06 A5=0x08 A6=0x0A A7=0x0C A8=0x0E
+    // B1=0x10 B2=0x12 B3=0x14
+    // But also, the LED control registers (0x00 to 0x17) are also interleaved, so:
+    // A1-A4=0x00 A5-A8=0x01
+    // So, the same math applies.
+
+	uint8_t control_register_r = led.r / 8;
+	uint8_t control_register_g = led.g / 8;
+	uint8_t control_register_b = led.b / 8;
+
+	uint8_t bit_r = led.r % 8;
+	uint8_t bit_g = led.g % 8;
+	uint8_t bit_b = led.b % 8;
+
+    if ( red ) {
+        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+    } else {
+        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+    }
+    if ( green ) {
+        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+    } else {
+        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+    }
+    if ( blue ) {
+        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+    } else {
+        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+    }
+
+    g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3736_mono_set_brightness( int index, uint8_t value )
+{
+    if ( index >= 0 && index < 96 ) {
+    	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+    	// Map index 0..95 to registers 0x00..0xBE (interleaved)
+    	uint8_t pwm_register = index * 2;
+        g_pwm_buffer[0][pwm_register] = value;
+        g_pwm_buffer_update_required = true;
+    }
+}
+
+void IS31FL3736_mono_set_brightness_all( uint8_t value )
+{
+    for ( int i = 0; i < 96; i++ )
+    {
+    	IS31FL3736_mono_set_brightness( i, value );
+    }
+}
+
+void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled )
+{
+	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+
+	// Map index 0..95 to registers 0x00..0xBE (interleaved)
+	uint8_t pwm_register = index * 2;
+	// Map register 0x00..0xBE (interleaved) into control register and bit
+	uint8_t control_register = pwm_register / 8;
+	uint8_t bit = pwm_register % 8;
+
+    if ( enabled ) {
+        g_led_control_registers[0][control_register] |= (1 << bit);
+    } else {
+        g_led_control_registers[0][control_register] &= ~(1 << bit);
+    }
+
+    g_led_control_registers_update_required = true;
+}
+
+void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_pwm_buffer_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG1
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+
+        IS31FL3736_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        //IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+    }
+    g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+    if ( g_led_control_registers_update_required )
+    {
+        // Firstly we need to unlock the command register and select PG0
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        for ( int i=0; i<24; i++ )
+        {
+            IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i] );
+            //IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] );
+        }
+    }
+}
+
diff --git a/drivers/issi/is31fl3736.h b/drivers/issi/is31fl3736.h
new file mode 100644
index 000000000..cff50fd0d
--- /dev/null
+++ b/drivers/issi/is31fl3736.h
@@ -0,0 +1,172 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+
+// Simple interface option.
+// If these aren't defined, just define them to make it compile
+
+
+#ifndef DRIVER_COUNT
+#define DRIVER_COUNT 2
+#endif
+
+#ifndef DRIVER_LED_TOTAL
+#define DRIVER_LED_TOTAL 96
+#endif
+
+
+typedef struct is31_led {
+  uint8_t driver:2;
+  uint8_t r;
+  uint8_t g;
+  uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3736_init( uint8_t addr );
+void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+void IS31FL3736_mono_set_brightness( int index, uint8_t value );
+void IS31FL3736_mono_set_brightness_all( uint8_t value );
+void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define A_1  0x00
+#define A_2  0x02
+#define A_3  0x04
+#define A_4  0x06
+#define A_5  0x08
+#define A_6  0x0A
+#define A_7  0x0C
+#define A_8  0x0E
+
+#define B_1  0x10
+#define B_2  0x12
+#define B_3  0x14
+#define B_4  0x16
+#define B_5  0x18
+#define B_6  0x1A
+#define B_7  0x1C
+#define B_8  0x1E
+
+#define C_1  0x20
+#define C_2  0x22
+#define C_3  0x24
+#define C_4  0x26
+#define C_5  0x28
+#define C_6  0x2A
+#define C_7  0x2C
+#define C_8  0x2E
+
+#define D_1  0x30
+#define D_2  0x32
+#define D_3  0x34
+#define D_4  0x36
+#define D_5  0x38
+#define D_6  0x3A
+#define D_7  0x3C
+#define D_8  0x3E
+
+#define E_1  0x40
+#define E_2  0x42
+#define E_3  0x44
+#define E_4  0x46
+#define E_5  0x48
+#define E_6  0x4A
+#define E_7  0x4C
+#define E_8  0x4E
+
+#define F_1  0x50
+#define F_2  0x52
+#define F_3  0x54
+#define F_4  0x56
+#define F_5  0x58
+#define F_6  0x5A
+#define F_7  0x5C
+#define F_8  0x5E
+
+#define G_1  0x60
+#define G_2  0x62
+#define G_3  0x64
+#define G_4  0x66
+#define G_5  0x68
+#define G_6  0x6A
+#define G_7  0x6C
+#define G_8  0x6E
+
+#define H_1  0x70
+#define H_2  0x72
+#define H_3  0x74
+#define H_4  0x76
+#define H_5  0x78
+#define H_6  0x7A
+#define H_7  0x7C
+#define H_8  0x7E
+
+#define I_1  0x80
+#define I_2  0x82
+#define I_3  0x84
+#define I_4  0x86
+#define I_5  0x88
+#define I_6  0x8A
+#define I_7  0x8C
+#define I_8  0x8E
+
+#define J_1  0x90
+#define J_2  0x92
+#define J_3  0x94
+#define J_4  0x96
+#define J_5  0x98
+#define J_6  0x9A
+#define J_7  0x9C
+#define J_8  0x9E
+
+#define K_1  0xA0
+#define K_2  0xA2
+#define K_3  0xA4
+#define K_4  0xA6
+#define K_5  0xA8
+#define K_6  0xAA
+#define K_7  0xAC
+#define K_8  0xAE
+
+#define L_1  0xB0
+#define L_2  0xB2
+#define L_3  0xB4
+#define L_4  0xB6
+#define L_5  0xB8
+#define L_6  0xBA
+#define L_7  0xBC
+#define L_8  0xBE
+
diff --git a/keyboards/rama/readme.md b/keyboards/rama/readme.md
index 4625eb1ef..c7ddf6d11 100644
--- a/keyboards/rama/readme.md
+++ b/keyboards/rama/readme.md
@@ -6,4 +6,6 @@ Firmware for keyboards designed by [RAMA WORKS](https://rama.works)
 
 [RAMA M60-A](https://rama.works/#/m60-a/)
 
+[RAMA U80-A](https://rama.works/#/tkl-a/)
+
 [RAMA M10-B](https://www.massdrop.com/buy/rama-m10-a?mode=guest_open)
diff --git a/keyboards/rama/u80_a/config.h b/keyboards/rama/u80_a/config.h
new file mode 100644
index 000000000..bfd972828
--- /dev/null
+++ b/keyboards/rama/u80_a/config.h
@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x080A // 80-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RAMA.WORKS
+#define PRODUCT         RAMA U80-A
+#define DESCRIPTION     RAMA U80-A Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
diff --git a/keyboards/rama/u80_a/info.json b/keyboards/rama/u80_a/info.json
new file mode 100644
index 000000000..cb61c89b8
--- /dev/null
+++ b/keyboards/rama/u80_a/info.json
@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "RAMA U80-A", 
+    "url": "https://rama.works/#/tkl-a/", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 18.25, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+        }
+    }
+}
diff --git a/keyboards/rama/u80_a/keymaps/default/keymap.c b/keyboards/rama/u80_a/keymaps/default/keymap.c
new file mode 100644
index 000000000..cf9225e3e
--- /dev/null
+++ b/keyboards/rama/u80_a/keymaps/default/keymap.c
@@ -0,0 +1,22 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	  [0] = LAYOUT_all(
+	    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_PSCR, KC_SLCK, KC_PAUS,
+	    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+	    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
+	    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_TRNS,                            KC_UP,
+	    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+
+	  [1] = LAYOUT_all(
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
diff --git a/keyboards/rama/u80_a/readme.md b/keyboards/rama/u80_a/readme.md
new file mode 100644
index 000000000..c98d00cb6
--- /dev/null
+++ b/keyboards/rama/u80_a/readme.md
@@ -0,0 +1,15 @@
+# RAMA U80-A
+
+![RAMA U80-A](https://something.com/something.jpg)
+
+A TKL keyboard. [More info at RAMA WORKS](https://rama.works/#/tkl-a/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: RAMA U80-A PCB  
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make rama/u80_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/rama/u80_a/rules.mk b/keyboards/rama/u80_a/rules.mk
new file mode 100644
index 000000000..99224c247
--- /dev/null
+++ b/keyboards/rama/u80_a/rules.mk
@@ -0,0 +1,68 @@
+# project specific files
+SRC =	drivers/issi/is31fl3736.c \
+		drivers/avr/i2c_master.c \
+		keyboards/wilba_tech/wt_mono_backlight.c \
+		keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/rama/u80_a/u80_a.c b/keyboards/rama/u80_a/u80_a.c
new file mode 100644
index 000000000..ccff6d62c
--- /dev/null
+++ b/keyboards/rama/u80_a/u80_a.c
@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)
diff --git a/keyboards/rama/u80_a/u80_a.h b/keyboards/rama/u80_a/u80_a.h
new file mode 100644
index 000000000..26403ef34
--- /dev/null
+++ b/keyboards/rama/u80_a/u80_a.h
@@ -0,0 +1,43 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 3,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 18 columns,
+// so the numbering goes 00 to 16. Deal with it.
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,             K014, K015, K016, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K114, K115, K116, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K214, K215, K216, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,                               \
+    K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,             K415,       \
+    K500, K501, K502,                   K506,                   K510, K511, K512, K513,       K514, K515, K516  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
+    { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \
+	{ K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \
+    { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 }  \
+}
+
diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h
new file mode 100644
index 000000000..95f4c786e
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_a/config.h
@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x060A // 60-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT60-A
+#define DESCRIPTION     wilba.tech WT60-A
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
diff --git a/keyboards/wilba_tech/wt60_a/info.json b/keyboards/wilba_tech/wt60_a/info.json
new file mode 100644
index 000000000..3b3614a8b
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_a/info.json
@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "wilba.tech WT60-A", 
+    "url": "https://wilba.tech", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+        "LAYOUT_60_ansi_split_bs_rshift": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        }
+    }
+}
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt60_a/keymaps/ansi_split_bs_rshift/keymap.c b/keyboards/wilba_tech/wt60_a/keymaps/ansi_split_bs_rshift/keymap.c
new file mode 100644
index 000000000..95e01fc2c
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_a/keymaps/ansi_split_bs_rshift/keymap.c
@@ -0,0 +1,38 @@
+// ANSI split backspace/right shift layout for WT60-A
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+	KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, KC_APP, KC_RCTL),
+
+// Fn1 Layer
+[1] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS, KC_DEL,
+	KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer
+[3] = LAYOUT_60_ansi_split_bs_rshift(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
diff --git a/keyboards/wilba_tech/wt60_a/keymaps/default/keymap.c b/keyboards/wilba_tech/wt60_a/keymaps/default/keymap.c
new file mode 100644
index 000000000..566736f5e
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_a/keymaps/default/keymap.c
@@ -0,0 +1,38 @@
+// Default layout for WT60-A
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_60_ansi(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+	KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(1),   KC_RCTL),
+
+// Fn1 Layer
+[1] = LAYOUT_60_ansi(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL ,
+	KC_CAPS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
+	KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END,  KC_PGDN, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_60_ansi(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer
+[3] = LAYOUT_60_ansi(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
diff --git a/keyboards/wilba_tech/wt60_a/readme.md b/keyboards/wilba_tech/wt60_a/readme.md
new file mode 100644
index 000000000..d7a73165d
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_a/readme.md
@@ -0,0 +1,15 @@
+# WILBA.TECH WT60-A
+
+![WILBA.TECH WT60-A](https://wilba.tech)
+
+WT60-A is a keyboard PCB supporting 60% layout. [More info at wilba.tech](https://wilba.tech/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: WILBA.TECH WT65-A  
+Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt60_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt60_a/rules.mk b/keyboards/wilba_tech/wt60_a/rules.mk
new file mode 100644
index 000000000..99224c247
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_a/rules.mk
@@ -0,0 +1,68 @@
+# project specific files
+SRC =	drivers/issi/is31fl3736.c \
+		drivers/avr/i2c_master.c \
+		keyboards/wilba_tech/wt_mono_backlight.c \
+		keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/wilba_tech/wt60_a/wt60_a.c b/keyboards/wilba_tech/wt60_a/wt60_a.c
new file mode 100644
index 000000000..ccff6d62c
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_a/wt60_a.c
@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)
diff --git a/keyboards/wilba_tech/wt60_a/wt60_a.h b/keyboards/wilba_tech/wt60_a/wt60_a.h
new file mode 100644
index 000000000..8ac8d9216
--- /dev/null
+++ b/keyboards/wilba_tech/wt60_a/wt60_a.h
@@ -0,0 +1,52 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       \
+    K400, K401, K402,                   K406,                   K410, K411, K412, K413        \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+	{ K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+    { K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413 }  \
+}
+
+#define LAYOUT_60_ansi( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013,  \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
+    K400, K401, K402,                   K406,                   K410, K411, K412, K413  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____ }, \
+	{ K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____ }, \
+    { K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413 }  \
+}
+
+
+
diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h
new file mode 100644
index 000000000..fa919f186
--- /dev/null
+++ b/keyboards/wilba_tech/wt65_a/config.h
@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x065A // 65-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT65-A
+#define DESCRIPTION     wilba.tech WT65-A
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
diff --git a/keyboards/wilba_tech/wt65_a/info.json b/keyboards/wilba_tech/wt65_a/info.json
new file mode 100644
index 000000000..f2b18dadd
--- /dev/null
+++ b/keyboards/wilba_tech/wt65_a/info.json
@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "wilba.tech WT65-A", 
+    "url": "https://wilba.tech", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Fn", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        }
+    }
+}
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt65_a/keymaps/default/keymap.c b/keyboards/wilba_tech/wt65_a/keymaps/default/keymap.c
new file mode 100644
index 000000000..c5ae81168
--- /dev/null
+++ b/keyboards/wilba_tech/wt65_a/keymaps/default/keymap.c
@@ -0,0 +1,37 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	// Default layer
+	[0] = LAYOUT_all(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
+		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                   KC_UP,   KC_END,
+		KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT),
+
+	// Fn1 Layer
+	[1] = LAYOUT_all(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  KC_TRNS,
+		KC_CAPS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END,  KC_PGDN, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn2 Layer
+	[2] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn3 Layer
+	[3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
diff --git a/keyboards/wilba_tech/wt65_a/readme.md b/keyboards/wilba_tech/wt65_a/readme.md
new file mode 100644
index 000000000..1551b55b5
--- /dev/null
+++ b/keyboards/wilba_tech/wt65_a/readme.md
@@ -0,0 +1,15 @@
+# WILBA.TECH WT65-A
+
+![WILBA.TECH WT65-A](https://wilba.tech)
+
+WT65-A is a keyboard PCB supporting 65% layout with 0.25U blocker. [More info at wilba.tech](https://wilba.tech/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: WILBA.TECH WT65-A  
+Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt65_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt65_a/rules.mk b/keyboards/wilba_tech/wt65_a/rules.mk
new file mode 100644
index 000000000..99224c247
--- /dev/null
+++ b/keyboards/wilba_tech/wt65_a/rules.mk
@@ -0,0 +1,68 @@
+# project specific files
+SRC =	drivers/issi/is31fl3736.c \
+		drivers/avr/i2c_master.c \
+		keyboards/wilba_tech/wt_mono_backlight.c \
+		keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/wilba_tech/wt65_a/wt65_a.c b/keyboards/wilba_tech/wt65_a/wt65_a.c
new file mode 100644
index 000000000..ccff6d62c
--- /dev/null
+++ b/keyboards/wilba_tech/wt65_a/wt65_a.c
@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)
diff --git a/keyboards/wilba_tech/wt65_a/wt65_a.h b/keyboards/wilba_tech/wt65_a/wt65_a.h
new file mode 100644
index 000000000..9c3e6e12b
--- /dev/null
+++ b/keyboards/wilba_tech/wt65_a/wt65_a.h
@@ -0,0 +1,41 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 2,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 16 columns,
+// so the numbering goes 00 to 14. Deal with it.
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K214, \
+    K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,             K313, K314, \
+    K400, K401, K402,                   K406,                   K410, K411,       K412, K413, K414  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
+	{ K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \
+    { K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413, K414 }  \
+}
+
diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h
new file mode 100644
index 000000000..9687cb6d6
--- /dev/null
+++ b/keyboards/wilba_tech/wt80_a/config.h
@@ -0,0 +1,187 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x080A // 80-A
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT80-A
+#define DESCRIPTION     wilba.tech WT80-A
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
diff --git a/keyboards/wilba_tech/wt80_a/info.json b/keyboards/wilba_tech/wt80_a/info.json
new file mode 100644
index 000000000..a43acb2f5
--- /dev/null
+++ b/keyboards/wilba_tech/wt80_a/info.json
@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "wilba.tech WT80-A", 
+    "url": "https://wilba.tech", 
+    "maintainer": "Wilba", 
+    "bootloader": "atmel-dfu", 
+    "width": 18.25, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+        }
+    }
+}
diff --git a/keyboards/wilba_tech/wt80_a/keymaps/default/keymap.c b/keyboards/wilba_tech/wt80_a/keymaps/default/keymap.c
new file mode 100644
index 000000000..cf9225e3e
--- /dev/null
+++ b/keyboards/wilba_tech/wt80_a/keymaps/default/keymap.c
@@ -0,0 +1,22 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	  [0] = LAYOUT_all(
+	    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_PSCR, KC_SLCK, KC_PAUS,
+	    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+	    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
+	    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_TRNS,                            KC_UP,
+	    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT),
+
+	  [1] = LAYOUT_all(
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,
+	    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
diff --git a/keyboards/wilba_tech/wt80_a/readme.md b/keyboards/wilba_tech/wt80_a/readme.md
new file mode 100644
index 000000000..011805748
--- /dev/null
+++ b/keyboards/wilba_tech/wt80_a/readme.md
@@ -0,0 +1,15 @@
+# WILBA.TECH WT80-A
+
+![WILBA.TECH WT80-A](https://wilba./tech)
+
+WT80-A is a keyboard PCB supporting TKL layout with 0.25U gaps. [More info at wilba.tech](https://wilba.tech/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: WILBA.TECH WT80-A  
+Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt80_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt80_a/rules.mk b/keyboards/wilba_tech/wt80_a/rules.mk
new file mode 100644
index 000000000..99224c247
--- /dev/null
+++ b/keyboards/wilba_tech/wt80_a/rules.mk
@@ -0,0 +1,68 @@
+# project specific files
+SRC =	drivers/issi/is31fl3736.c \
+		drivers/avr/i2c_master.c \
+		keyboards/wilba_tech/wt_mono_backlight.c \
+		keyboards/wilba_tech/wt_main.c
+		
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/wilba_tech/wt80_a/wt80_a.c b/keyboards/wilba_tech/wt80_a/wt80_a.c
new file mode 100644
index 000000000..ccff6d62c
--- /dev/null
+++ b/keyboards/wilba_tech/wt80_a/wt80_a.c
@@ -0,0 +1,17 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Nothing to see here, move along... ;-)
diff --git a/keyboards/wilba_tech/wt80_a/wt80_a.h b/keyboards/wilba_tech/wt80_a/wt80_a.h
new file mode 100644
index 000000000..26403ef34
--- /dev/null
+++ b/keyboards/wilba_tech/wt80_a/wt80_a.h
@@ -0,0 +1,43 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 3,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 18 columns,
+// so the numbering goes 00 to 16. Deal with it.
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,             K014, K015, K016, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K114, K115, K116, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K214, K215, K216, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,                               \
+    K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,             K415,       \
+    K500, K501, K502,                   K506,                   K510, K511, K512, K513,       K514, K515, K516  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \
+    { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____ }, \
+	{ K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \
+    { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, K516 }  \
+}
+
diff --git a/keyboards/wilba_tech/wt_main.c b/keyboards/wilba_tech/wt_main.c
new file mode 100644
index 000000000..f514dbefc
--- /dev/null
+++ b/keyboards/wilba_tech/wt_main.c
@@ -0,0 +1,55 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_mono_backlight.h"
+
+void bootmagic_lite(void)
+{
+	// The lite version of TMK's bootmagic.
+	// 100% less potential for accidentally making the
+	// keyboard do stupid things.
+
+	// We need multiple scans because debouncing can't be turned off.
+	matrix_scan();
+	wait_ms(DEBOUNCING_DELAY);
+	wait_ms(DEBOUNCING_DELAY);
+	matrix_scan();
+
+	// If the Esc (matrix 0,0) is held down on power up,
+	// reset the EEPROM valid state and jump to bootloader.
+	if ( matrix_get_row(0) & (1<<0) ) {
+		// Set the TMK/QMK EEPROM state as invalid.
+		eeconfig_disable();
+		// Jump to bootloader.
+		bootloader_jump();
+	}
+}
+
+void matrix_init_kb(void)
+{
+	bootmagic_lite();
+	backlight_init_drivers();
+	backlight_timer_init();
+	backlight_timer_enable();
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void)
+{
+	backlight_update_pwm_buffers();
+	matrix_scan_user();
+}
diff --git a/keyboards/wilba_tech/wt_mono_backlight.c b/keyboards/wilba_tech/wt_mono_backlight.c
new file mode 100644
index 000000000..bf485bce1
--- /dev/null
+++ b/keyboards/wilba_tech/wt_mono_backlight.c
@@ -0,0 +1,116 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "wt_mono_backlight.h"
+#include "drivers/avr/i2c_master.h"
+#include "drivers/issi/is31fl3736.h"
+
+#include <avr/interrupt.h>
+
+#define ISSI_ADDR_DEFAULT 0x50
+
+bool g_suspend_state = false;
+
+// Global tick at 20 Hz
+uint32_t g_tick = 0;
+uint8_t g_config_effect_speed = 0;
+uint8_t g_config_brightness = 255;
+
+void backlight_init_drivers(void)
+{
+	// Initialize I2C
+	i2c_init();
+	IS31FL3736_init( ISSI_ADDR_DEFAULT );
+
+	for ( uint8_t index = 0; index < 96; index++ )	{
+		IS31FL3736_mono_set_led_control_register( index, true );
+	}
+	IS31FL3736_update_led_control_registers( ISSI_ADDR_DEFAULT, 0x00 );
+}
+
+
+// This is (F_CPU/1024) / 20 Hz
+// = 15625 Hz / 20 Hz
+// = 781
+#define TIMER3_TOP 781
+
+void backlight_timer_init(void)
+{
+	static uint8_t backlight_timer_is_init = 0;
+	if ( backlight_timer_is_init ) {
+		return;
+	}
+	backlight_timer_is_init = 1;
+
+	// Timer 3 setup
+	TCCR3B = _BV(WGM32) | 			// CTC mode OCR3A as TOP
+			 _BV(CS32) | _BV(CS30); // prescale by /1024
+	// Set TOP value
+	uint8_t sreg = SREG;
+	cli();
+
+	OCR3AH = (TIMER3_TOP >> 8) & 0xff;
+	OCR3AL = TIMER3_TOP & 0xff;
+	SREG = sreg;
+}
+
+void backlight_timer_enable(void)
+{
+	TIMSK3 |= _BV(OCIE3A);
+}
+
+void backlight_timer_disable(void)
+{
+	TIMSK3 &= ~_BV(OCIE3A);
+}
+
+void backlight_set_suspend_state(bool state)
+{
+	g_suspend_state = state;
+}
+
+void backlight_effect_cycle_all(void)
+{
+	uint8_t offset = ( g_tick << g_config_effect_speed ) & 0xFF;
+
+	backlight_set_brightness_all( offset );
+}
+
+ISR(TIMER3_COMPA_vect)
+{
+	// delay 1 second before driving LEDs or doing anything else
+	static uint8_t startup_tick = 0;
+	if ( startup_tick < 20 ) {
+		startup_tick++;
+		return;
+	}
+
+	g_tick++;
+
+	//backlight_effect_cycle_all();
+	backlight_set_brightness_all( 255 );
+}
+
+void backlight_update_pwm_buffers(void)
+{
+	IS31FL3736_update_pwm_buffers(ISSI_ADDR_DEFAULT,0x00);
+}
+
+void backlight_set_brightness_all( uint8_t value )
+{
+	IS31FL3736_mono_set_brightness_all( value );
+}
+
diff --git a/keyboards/wilba_tech/wt_mono_backlight.h b/keyboards/wilba_tech/wt_mono_backlight.h
new file mode 100644
index 000000000..70031bedc
--- /dev/null
+++ b/keyboards/wilba_tech/wt_mono_backlight.h
@@ -0,0 +1,33 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+void backlight_init_drivers(void);
+
+void backlight_timer_init(void);
+void backlight_timer_enable(void);
+void backlight_timer_disable(void);
+
+void backlight_set_suspend_state(bool state);
+
+void backlight_update_pwm_buffers(void);
+
+void backlight_set_brightness_all( uint8_t value );
+
-- 
cgit v1.2.3-70-g09d2


From 66ef1e3d6770e388d631d25e4cd1c6b1640cea24 Mon Sep 17 00:00:00 2001
From: Wilba6582 <Wilba6582@users.noreply.github.com>
Date: Mon, 1 Oct 2018 01:35:10 +1000
Subject: RAMA M6-B and IS31FL3218 driver (#4021)

* Initial RAMA M6-B commit.

* Moved IS31FL3218 driver, minor cleanups

* Refactor, added dynamic keymap.

* Added dynamic keymaps to RAMA M6-A

* Refactor M6-A and M6-B to use common code.

* Formatting

* Cleanup

* Cleanup

* Changes from review
---
 drivers/issi/is31fl3218.c                    | 102 +++++++++
 drivers/issi/is31fl3218.h                    |  24 ++
 keyboards/rama/m6_a/config.h                 |  24 +-
 keyboards/rama/m6_a/keymaps/default/config.h |  24 --
 keyboards/rama/m6_a/keymaps/default/keymap.c | 316 +--------------------------
 keyboards/rama/m6_a/m6_a.c                   |  31 +--
 keyboards/rama/m6_a/readme.md                |   2 +-
 keyboards/rama/m6_a/rules.mk                 |  44 ++--
 keyboards/rama/m6_b/config.h                 | 129 +++++++++++
 keyboards/rama/m6_b/info.json                |  19 ++
 keyboards/rama/m6_b/keymaps/default/keymap.c |  16 ++
 keyboards/rama/m6_b/m6_b.c                   | 230 +++++++++++++++++++
 keyboards/rama/m6_b/m6_b.h                   |  28 +++
 keyboards/rama/m6_b/m6_b_api.h               |  39 ++++
 keyboards/rama/m6_b/readme.md                |  15 ++
 keyboards/rama/m6_b/rgb_backlight.c          | 139 ++++++++++++
 keyboards/rama/m6_b/rgb_backlight.h          |  34 +++
 keyboards/rama/m6_b/rules.mk                 |  77 +++++++
 quantum/dynamic_keymap.c                     |   2 +-
 19 files changed, 901 insertions(+), 394 deletions(-)
 create mode 100644 drivers/issi/is31fl3218.c
 create mode 100644 drivers/issi/is31fl3218.h
 delete mode 100644 keyboards/rama/m6_a/keymaps/default/config.h
 create mode 100644 keyboards/rama/m6_b/config.h
 create mode 100644 keyboards/rama/m6_b/info.json
 create mode 100644 keyboards/rama/m6_b/keymaps/default/keymap.c
 create mode 100644 keyboards/rama/m6_b/m6_b.c
 create mode 100644 keyboards/rama/m6_b/m6_b.h
 create mode 100644 keyboards/rama/m6_b/m6_b_api.h
 create mode 100644 keyboards/rama/m6_b/readme.md
 create mode 100644 keyboards/rama/m6_b/rgb_backlight.c
 create mode 100644 keyboards/rama/m6_b/rgb_backlight.h
 create mode 100644 keyboards/rama/m6_b/rules.mk

(limited to 'drivers')

diff --git a/drivers/issi/is31fl3218.c b/drivers/issi/is31fl3218.c
new file mode 100644
index 000000000..db44f7256
--- /dev/null
+++ b/drivers/issi/is31fl3218.c
@@ -0,0 +1,102 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "is31fl3218.h"
+#include "i2c_master.h"
+
+// This is the full 8-bit address
+#define ISSI_ADDRESS 0b10101000
+
+// These are the register addresses
+#define ISSI_REG_SHUTDOWN 0x00
+#define ISSI_REG_PWM 0x01
+#define ISSI_REG_CONTROL 0x13
+#define ISSI_REG_UPDATE 0x16
+#define ISSI_REG_RESET 0x17
+
+// Default timeout if no I2C response
+#define ISSI_TIMEOUT 100
+
+// Reusable buffer for transfers
+uint8_t g_twi_transfer_buffer[20];
+
+// IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
+// If used as RGB LED driver, LEDs are assigned RGB,RGB,RGB,RGB,RGB,RGB
+uint8_t g_pwm_buffer[18];
+bool g_pwm_buffer_update_required = false;
+
+void IS31FL3218_write_register( uint8_t reg, uint8_t data )
+{
+	g_twi_transfer_buffer[0] = reg;
+	g_twi_transfer_buffer[1] = data;
+	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+}
+
+void IS31FL3218_write_pwm_buffer( uint8_t *pwm_buffer )
+{
+	g_twi_transfer_buffer[0] = ISSI_REG_PWM;
+	for ( int i=0; i<18; i++ ) {
+		g_twi_transfer_buffer[1+i] = pwm_buffer[i];
+	}
+	
+	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
+}
+
+void IS31FL3218_init(void)
+{
+	// In case we ever want to reinitialize (?)
+	IS31FL3218_write_register( ISSI_REG_RESET, 0x00 );
+	
+	// Turn off software shutdown
+	IS31FL3218_write_register( ISSI_REG_SHUTDOWN, 0x01 );
+
+	// Set all PWM values to zero
+	for ( uint8_t i = 0; i < 18; i++ ) {
+		IS31FL3218_write_register( ISSI_REG_PWM+i, 0x00 );
+	}
+	
+	// Enable all channels
+	for ( uint8_t i = 0; i < 3; i++ ) {
+		IS31FL3218_write_register( ISSI_REG_CONTROL+i, 0b00111111 );
+	}
+	
+	// Load PWM registers and LED Control register data
+	IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
+}
+
+void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+	g_pwm_buffer[index * 3 + 0] = red;
+	g_pwm_buffer[index * 3 + 1] = green;
+	g_pwm_buffer[index * 3 + 2] = blue;
+	g_pwm_buffer_update_required = true;
+}
+
+void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+	for ( int i = 0; i < 6; i++ ) {
+		IS31FL3218_set_color( i, red, green, blue );
+	}
+}
+
+void IS31FL3218_update_pwm_buffers(void)
+{
+	if ( g_pwm_buffer_update_required ) {
+		IS31FL3218_write_pwm_buffer( g_pwm_buffer );
+		// Load PWM registers and LED Control register data
+		IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
+	}
+	g_pwm_buffer_update_required = false;
+}
diff --git a/drivers/issi/is31fl3218.h b/drivers/issi/is31fl3218.h
new file mode 100644
index 000000000..2d24e5146
--- /dev/null
+++ b/drivers/issi/is31fl3218.h
@@ -0,0 +1,24 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+void IS31FL3218_init(void);
+void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3218_update_pwm_buffers(void);
diff --git a/keyboards/rama/m6_a/config.h b/keyboards/rama/m6_a/config.h
index 0c5355f4a..8d77f5339 100644
--- a/keyboards/rama/m6_a/config.h
+++ b/keyboards/rama/m6_a/config.h
@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -187,4 +186,23 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-#endif
+#define RGB_BACKLIGHT_ENABLED 0
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+37)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 72
diff --git a/keyboards/rama/m6_a/keymaps/default/config.h b/keyboards/rama/m6_a/keymaps/default/config.h
deleted file mode 100644
index d150575c1..000000000
--- a/keyboards/rama/m6_a/keymaps/default/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright 2018 Wilba
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
diff --git a/keyboards/rama/m6_a/keymaps/default/keymap.c b/keyboards/rama/m6_a/keymaps/default/keymap.c
index 6b15f3cd1..7a408fa8a 100644
--- a/keyboards/rama/m6_a/keymaps/default/keymap.c
+++ b/keyboards/rama/m6_a/keymaps/default/keymap.c
@@ -3,322 +3,14 @@
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
     LAYOUT(
-        TO(1), KC_A, KC_B, KC_C, KC_D, KC_E),
+        KC_1, KC_2, KC_3, KC_4, KC_5, KC_6),
 
     LAYOUT(
-        TO(2), KC_F, KC_G, KC_H, KC_I, KC_J),
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
 
     LAYOUT(
-        TO(3), KC_K, KC_L, KC_M, KC_N, KC_O),
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
 
     LAYOUT(
-        TO(4), KC_P, KC_Q, KC_R, KC_S, KC_T),
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
 
-    LAYOUT(
-        TO(5), KC_U, KC_V, KC_W, KC_X, KC_Y),
-
-    LAYOUT(
-        TO(0), KC_Z, KC_1, KC_2, KC_3, KC_4)};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    //keyevent_t event = record->event;
-
-    switch (id)
-    {
-    case 0:
-        if (record->event.pressed)
-        {
-            return MACRO(T(T), T(G), T(L), T(H), T(F), T(ENT), END);
-        }
-        break;
-    case 1:
-        if (record->event.pressed)
-        {
-            return MACRO(T(T), T(G), T(G), T(ENT), END);
-        }
-        break;
-    case 2:
-        if (record->event.pressed)
-        {
-            return MACRO(D(NO), T(L), U(NO), END);
-        }
-        break;
-    case 3:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), T(Z), U(LCTL), END);
-        }
-        break;
-    case 4:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), D(LSFT), T(Z), U(LSFT), U(LCTL), END);
-        }
-        break;
-    case 5:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), T(X), U(LCTL), END);
-        }
-        break;
-    case 6:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), T(C), U(LCTL), END);
-        }
-        break;
-    case 7:
-        if (record->event.pressed)
-        {
-            return MACRO(D(LCTL), T(V), U(LCTL), END);
-        }
-        break;
-    }
-    return MACRO_NONE;
-}
-
-// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7
-// This is 1-based because I copied it from Knops code.
-void set_switch_led(int ledId, bool state)
-{
-    if (state)
-    {
-        switch (ledId)
-        {
-        case 1:
-            PORTD |= (1 << 6);
-            break;
-        case 2:
-            PORTB |= (1 << 6);
-            break;
-        case 3:
-            PORTF |= (1 << 5);
-            break;
-        case 4:
-            PORTB |= (1 << 4);
-            break;
-        case 5:
-            PORTC |= (1 << 7);
-            break;
-        case 6:
-            PORTF |= (1 << 7);
-            break;
-        }
-    }
-    else
-    {
-        switch (ledId)
-        {
-        case 1:
-            PORTD &= ~(1 << 6);
-            break;
-        case 2:
-            PORTB &= ~(1 << 6);
-            break;
-        case 3:
-            PORTF &= ~(1 << 5);
-            break;
-        case 4:
-            PORTB &= ~(1 << 4);
-            break;
-        case 5:
-            PORTC &= ~(1 << 7);
-            break;
-        case 6:
-            PORTF &= ~(1 << 7);
-            break;
-        }
-    }
-}
-
-void set_layer_led(int layerId)
-{
-    // UNUSED
-}
-
-void led_set_layer(int layer);
-
-void matrix_init_user(void)
-{
-    led_init_ports();
-    led_set_layer(0);
-}
-
-void matrix_scan_user(void)
-{
-}
-
-// M6-A LEDs are connected to D6, B6, F5, B4, C7, F7
-void led_init_ports()
-{
-    // Switch #1
-    DDRD |= (1 << 6);
-    PORTD &= ~(1 << 6);
-
-    // Switch #2
-    DDRB |= (1 << 6);
-    PORTB &= ~(1 << 6);
-
-    // Switch #3
-    DDRF |= (1 << 5);
-    PORTF &= ~(1 << 5);
-
-    // Switch #4
-    DDRB |= (1 << 4);
-    PORTB &= ~(1 << 4);
-
-    // Switch #5
-    DDRC |= (1 << 7);
-    PORTC &= ~(1 << 7);
-
-    // Switch #6
-    DDRF |= (1 << 7);
-    PORTF &= ~(1 << 7);
-}
-
-void led_set_user(uint8_t usb_led)
-{
-
-    if (usb_led & (1 << USB_LED_NUM_LOCK))
-    {
-    }
-    else
-    {
-    }
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK))
-    {
-    }
-    else
-    {
-    }
-
-    if (usb_led & (1 << USB_LED_SCROLL_LOCK))
-    {
-    }
-    else
-    {
-    }
-
-    if (usb_led & (1 << USB_LED_COMPOSE))
-    {
-    }
-    else
-    {
-    }
-
-    if (usb_led & (1 << USB_LED_KANA))
-    {
-    }
-    else
-    {
-    }
-}
-
-void led_set_layer(int layer)
-{
-    switch (layer)
-    {
-    case 0:
-        set_switch_led(1, true);
-        set_switch_led(2, false);
-        set_switch_led(3, false);
-        set_switch_led(4, false);
-        set_switch_led(5, false);
-        set_switch_led(6, false);
-        break;
-    case 1:
-        set_switch_led(1, false);
-        set_switch_led(2, true);
-        set_switch_led(3, false);
-        set_switch_led(4, false);
-        set_switch_led(5, false);
-        set_switch_led(6, false);
-        break;
-    case 2:
-        set_switch_led(1, false);
-        set_switch_led(2, false);
-        set_switch_led(3, true);
-        set_switch_led(4, false);
-        set_switch_led(5, false);
-        set_switch_led(6, false);
-        break;
-    case 3:
-        set_switch_led(1, false);
-        set_switch_led(2, false);
-        set_switch_led(3, false);
-        set_switch_led(4, true);
-        set_switch_led(5, false);
-        set_switch_led(6, false);
-        break;
-    case 4:
-        set_switch_led(1, false);
-        set_switch_led(2, false);
-        set_switch_led(3, false);
-        set_switch_led(4, false);
-        set_switch_led(5, true);
-        set_switch_led(6, false);
-        break;
-    case 5:
-        set_switch_led(1, false);
-        set_switch_led(2, false);
-        set_switch_led(3, false);
-        set_switch_led(4, false);
-        set_switch_led(5, false);
-        set_switch_led(6, true);
-        break;
-    default:
-        set_switch_led(1, true);
-        set_switch_led(2, true);
-        set_switch_led(3, true);
-        set_switch_led(4, true);
-        set_switch_led(5, true);
-        set_switch_led(6, true);
-        break;
-    }
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record)
-{
-    switch (keycode)
-    {
-    case TO(0):
-        if (record->event.pressed)
-        {
-            led_set_layer(0);
-        }
-        break;
-    case TO(1):
-        if (record->event.pressed)
-        {
-            led_set_layer(1);
-        }
-        break;
-    case TO(2):
-        if (record->event.pressed)
-        {
-            led_set_layer(2);
-        }
-        break;
-    case TO(3):
-        if (record->event.pressed)
-        {
-            led_set_layer(3);
-        }
-        break;
-    case TO(4):
-        if (record->event.pressed)
-        {
-            led_set_layer(4);
-        }
-        break;
-    case TO(5):
-        if (record->event.pressed)
-        {
-            led_set_layer(5);
-        }
-        break;
-    }
-    return true;
-}
diff --git a/keyboards/rama/m6_a/m6_a.c b/keyboards/rama/m6_a/m6_a.c
index 1c84ea2b8..fa1900360 100644
--- a/keyboards/rama/m6_a/m6_a.c
+++ b/keyboards/rama/m6_a/m6_a.c
@@ -1,4 +1,4 @@
-/* Copyright 2018 Wilba
+/* Copyright 2018 Jason Williams (Wilba)
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,32 +13,3 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "m6_a.h"
-/*
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-*/
diff --git a/keyboards/rama/m6_a/readme.md b/keyboards/rama/m6_a/readme.md
index 5dd2b92e1..ceaf6a88d 100644
--- a/keyboards/rama/m6_a/readme.md
+++ b/keyboards/rama/m6_a/readme.md
@@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make rama/m6_a:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/rama/m6_a/rules.mk b/keyboards/rama/m6_a/rules.mk
index ca2a2a5f8..ed85ac36d 100644
--- a/keyboards/rama/m6_a/rules.mk
+++ b/keyboards/rama/m6_a/rules.mk
@@ -1,5 +1,7 @@
+# project specific files
+SRC =	keyboards/rama/m6_b/m6_b.c
+
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.
@@ -38,31 +40,27 @@ F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Boot Section
+BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/rama/m6_b/config.h b/keyboards/rama/m6_b/config.h
new file mode 100644
index 000000000..1adaad3f9
--- /dev/null
+++ b/keyboards/rama/m6_b/config.h
@@ -0,0 +1,129 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x006B // 6-B
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RAMA.WORKS
+#define PRODUCT         RAMA M6-B
+#define DESCRIPTION     RAMA M6-B Macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6 }
+#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+37)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 72
diff --git a/keyboards/rama/m6_b/info.json b/keyboards/rama/m6_b/info.json
new file mode 100644
index 000000000..c88a3cc61
--- /dev/null
+++ b/keyboards/rama/m6_b/info.json
@@ -0,0 +1,19 @@
+{
+  "keyboard_name": "m6-b",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 3,
+  "height": 2,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        { "x": 0, "y": 0 },
+        { "x": 1, "y": 0 },
+        { "x": 2, "y": 0 },
+        { "x": 0, "y": 1 },
+        { "x": 1, "y": 1 },
+        { "x": 2, "y": 1 }
+      ]
+    }
+  }
+}
diff --git a/keyboards/rama/m6_b/keymaps/default/keymap.c b/keyboards/rama/m6_b/keymaps/default/keymap.c
new file mode 100644
index 000000000..7a408fa8a
--- /dev/null
+++ b/keyboards/rama/m6_b/keymaps/default/keymap.c
@@ -0,0 +1,16 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    LAYOUT(
+        KC_1, KC_2, KC_3, KC_4, KC_5, KC_6),
+
+    LAYOUT(
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+    LAYOUT(
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+    LAYOUT(
+        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) };
+
diff --git a/keyboards/rama/m6_b/m6_b.c b/keyboards/rama/m6_b/m6_b.c
new file mode 100644
index 000000000..e7cd2f628
--- /dev/null
+++ b/keyboards/rama/m6_b/m6_b.c
@@ -0,0 +1,230 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "m6_b.h"
+#include "m6_b_api.h"
+
+// Check that no backlight functions are called
+#if RGB_BACKLIGHT_ENABLED
+#include "rgb_backlight.h"
+#endif // RGB_BACKLIGHT_ENABLED
+
+#include "raw_hid.h"
+#include "dynamic_keymap.h"
+#include "timer.h"
+#include "tmk_core/common/eeprom.h"
+
+bool eeprom_is_valid(void)
+{
+	return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
+			eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
+}
+
+void eeprom_set_valid(bool valid)
+{
+	eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
+	eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
+}
+
+void eeprom_reset(void)
+{
+	// Set the keyboard-specific EEPROM state as invalid.
+	eeprom_set_valid(false);
+	// Set the TMK/QMK EEPROM state as invalid.
+	eeconfig_disable();
+}
+
+#ifdef RAW_ENABLE
+
+void raw_hid_receive( uint8_t *data, uint8_t length )
+{
+	uint8_t *command_id = &(data[0]);
+	uint8_t *command_data = &(data[1]);
+	switch ( *command_id )
+	{
+		case id_get_protocol_version:
+		{
+			command_data[0] = PROTOCOL_VERSION >> 8;
+			command_data[1] = PROTOCOL_VERSION & 0xFF;
+			break;
+		}
+		case id_get_keyboard_value:
+		{
+			if ( command_data[0] == id_uptime )
+			{
+				uint32_t value = timer_read32();
+				command_data[1] = (value >> 24 ) & 0xFF;
+				command_data[2] = (value >> 16 ) & 0xFF;
+				command_data[3] = (value >> 8 ) & 0xFF;
+				command_data[4] = value & 0xFF;
+			}
+			else
+			{
+				*command_id = id_unhandled;
+			}
+			break;
+		}
+#ifdef DYNAMIC_KEYMAP_ENABLE
+		case id_dynamic_keymap_get_keycode:
+		{
+			uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
+			command_data[3] = keycode >> 8;
+			command_data[4] = keycode & 0xFF;
+			break;
+		}
+		case id_dynamic_keymap_set_keycode:
+		{
+			dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
+			break;
+		}
+		case id_dynamic_keymap_reset:
+		{
+			dynamic_keymap_reset();
+			break;
+		}
+#endif // DYNAMIC_KEYMAP_ENABLE
+#if RGB_BACKLIGHT_ENABLED
+		case id_backlight_config_set_value:
+		{
+			//backlight_config_set_value(command_data);
+			break;
+		}
+		case id_backlight_config_get_value:
+		{
+			//backlight_config_get_value(command_data);
+			break;
+		}
+		case id_backlight_config_save:
+		{
+			//backlight_config_save();
+			break;
+		}
+#endif // RGB_BACKLIGHT_ENABLED
+		case id_eeprom_reset:
+		{
+			eeprom_reset();
+			break;
+		}
+		case id_bootloader_jump:
+		{
+			// Need to send data back before the jump
+			// Informs host that the command is handled
+			raw_hid_send( data, length );
+			// Give host time to read it
+			wait_ms(100);
+			bootloader_jump();
+			break;
+		}
+		default:
+		{
+			// Unhandled message.
+			*command_id = id_unhandled;
+			break;
+		}
+	}
+
+	// Return same buffer with values changed
+	raw_hid_send( data, length );
+
+}
+
+#endif
+
+void main_init(void)
+{
+	// If the EEPROM has the magic, the data is good.
+	// OK to load from EEPROM.
+	if (eeprom_is_valid()) {
+#if RGB_BACKLIGHT_ENABLED
+		//backlight_config_load();
+#endif // RGB_BACKLIGHT_ENABLED
+	} else	{
+#if RGB_BACKLIGHT_ENABLED
+		// If the EEPROM has not been saved before, or is out of date,
+		// save the default values to the EEPROM. Default values
+		// come from construction of the zeal_backlight_config instance.
+		//backlight_config_save();
+#endif // RGB_BACKLIGHT_ENABLED
+#ifdef DYNAMIC_KEYMAP_ENABLE
+		// This resets the keymaps in EEPROM to what is in flash.
+		dynamic_keymap_reset();
+#endif
+		// Save the magic number last, in case saving was interrupted
+		eeprom_set_valid(true);
+	}
+#if RGB_BACKLIGHT_ENABLED
+	// Initialize LED drivers for backlight.
+	backlight_init_drivers();
+
+	backlight_timer_init();
+	backlight_timer_enable();
+#endif // RGB_BACKLIGHT_ENABLED
+}
+
+void bootmagic_lite(void)
+{
+	// The lite version of TMK's bootmagic.
+	// 100% less potential for accidentally making the
+	// keyboard do stupid things.
+
+	// We need multiple scans because debouncing can't be turned off.
+	matrix_scan();
+	wait_ms(DEBOUNCING_DELAY);
+	wait_ms(DEBOUNCING_DELAY);
+	matrix_scan();
+
+	// If the Esc (matrix 0,0) is held down on power up,
+	// reset the EEPROM valid state and jump to bootloader.
+	if ( matrix_get_row(0) & (1<<0) ) {
+		eeprom_reset();
+		bootloader_jump();
+	}
+}
+
+void matrix_init_kb(void) {
+	bootmagic_lite();
+	main_init();
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+#if RGB_BACKLIGHT_ENABLED
+	// This only updates the LED driver buffers if something has changed.
+	backlight_update_pwm_buffers();
+#endif // BACKLIGHT_ENABLED
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	led_set_user(usb_led);
+}
+
+void suspend_power_down_kb(void)
+{
+#if RGB_BACKLIGHT_ENABLED
+	//backlight_set_suspend_state(true);
+#endif // BACKLIGHT_ENABLED
+}
+
+void suspend_wakeup_init_kb(void)
+{
+#if RGB_BACKLIGHT_ENABLED
+	//backlight_set_suspend_state(false);
+#endif // BACKLIGHT_ENABLED
+}
diff --git a/keyboards/rama/m6_b/m6_b.h b/keyboards/rama/m6_b/m6_b.h
new file mode 100644
index 000000000..bd4158bcb
--- /dev/null
+++ b/keyboards/rama/m6_b/m6_b.h
@@ -0,0 +1,28 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT(                         \
+    K00, K01, K02, K03, K04, K05)       \
+    {                                   \
+        {K00, K01, K02, K03, K04, K05}, \
+    }
+
diff --git a/keyboards/rama/m6_b/m6_b_api.h b/keyboards/rama/m6_b/m6_b_api.h
new file mode 100644
index 000000000..041fd6e6e
--- /dev/null
+++ b/keyboards/rama/m6_b/m6_b_api.h
@@ -0,0 +1,39 @@
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define PROTOCOL_VERSION 0x0001
+
+enum m6_b_command_id
+{
+	id_get_protocol_version = 0x01, // always 0x01
+	id_get_keyboard_value,
+	id_set_keyboard_value,
+	id_dynamic_keymap_get_keycode,
+	id_dynamic_keymap_set_keycode,
+	id_dynamic_keymap_reset,
+	id_backlight_config_set_value,
+	id_backlight_config_get_value,
+	id_backlight_config_save,
+	id_eeprom_reset,
+	id_bootloader_jump,
+	id_unhandled = 0xFF,
+};
+
+enum m6_b_keyboard_value_id
+{
+	id_uptime = 0x01
+};
diff --git a/keyboards/rama/m6_b/readme.md b/keyboards/rama/m6_b/readme.md
new file mode 100644
index 000000000..d6bdd0c4c
--- /dev/null
+++ b/keyboards/rama/m6_b/readme.md
@@ -0,0 +1,15 @@
+# RAMA M6-B
+
+![RAMA M6-B](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/59fc7b1053450adf5bf9a852/1515932239307/RAMA-RAMA-M6-DSA-XO-CAPS.73-3_1.jpg?format=1500w)
+
+A 6-key companion keyboard. [More info at RAMA WORKS](https://rama.works/m6a)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: RAMA M6-B PCB  
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make rama/m6_b:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/rama/m6_b/rgb_backlight.c b/keyboards/rama/m6_b/rgb_backlight.c
new file mode 100644
index 000000000..8f7ac0630
--- /dev/null
+++ b/keyboards/rama/m6_b/rgb_backlight.c
@@ -0,0 +1,139 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#if RGB_BACKLIGHT_ENABLED
+
+#include "rgb_backlight.h"
+//#include "rgb_backlight_api.h"
+
+#include <avr/io.h>
+#include <util/delay.h>
+#include <avr/interrupt.h>
+#include "progmem.h"
+
+#include "quantum/color.h"
+#include "drivers/avr/i2c_master.h"
+#include "drivers/issi/is31fl3218.h"
+
+bool g_suspend_state = false;
+
+// Global tick at 20 Hz
+uint32_t g_tick = 0;
+uint8_t g_config_effect_speed = 0;
+uint8_t g_config_brightness = 255;
+
+void backlight_update_pwm_buffers(void)
+{
+	IS31FL3218_update_pwm_buffers();
+}
+
+void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+	IS31FL3218_set_color( index, red, green, blue );
+}
+
+void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+	IS31FL3218_set_color_all( red, green, blue );
+}
+
+
+// This is (F_CPU/1024) / 20 Hz
+// = 15625 Hz / 20 Hz
+// = 781
+#define TIMER3_TOP 260
+
+void backlight_timer_init(void)
+{
+	static uint8_t backlight_timer_is_init = 0;
+	if ( backlight_timer_is_init )
+	{
+		return;
+	}
+	backlight_timer_is_init = 1;
+
+	// Timer 3 setup
+	TCCR3B = _BV(WGM32) | 			// CTC mode OCR3A as TOP
+			 _BV(CS32) | _BV(CS30); // prescale by /1024
+	// Set TOP value
+	uint8_t sreg = SREG;
+	cli();
+
+	OCR3AH = (TIMER3_TOP >> 8) & 0xff;
+	OCR3AL = TIMER3_TOP & 0xff;
+	SREG = sreg;
+}
+
+void backlight_timer_enable(void)
+{
+	TIMSK3 |= _BV(OCIE3A);
+}
+
+void backlight_timer_disable(void)
+{
+	TIMSK3 &= ~_BV(OCIE3A);
+}
+
+void backlight_set_suspend_state(bool state)
+{
+	g_suspend_state = state;
+}
+
+void backlight_effect_cycle_all(void)
+{
+	uint8_t hueOffset = ( g_tick << g_config_effect_speed ) & 0xFF;
+	uint8_t satOffset = 127;
+	// Relies on hue being 8-bit and wrapping
+	for ( int i=0; i<6; i++ )
+	{
+		HSV hsv = { .h = hueOffset, .s = satOffset, .v = g_config_brightness };
+		RGB rgb = hsv_to_rgb( hsv );
+		backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+	}
+}
+
+ISR(TIMER3_COMPA_vect)
+{
+	// delay 1 second before driving LEDs or doing anything else
+	static uint8_t startup_tick = 0;
+	if ( startup_tick < 20 )
+	{
+		startup_tick++;
+		return;
+	}
+
+	g_tick++;
+
+	if ( g_suspend_state )
+	{
+		backlight_set_color_all( 0, 0, 0 );
+	}
+	else
+	{
+		//HSV hsv = { .h = 240, .s = 255, .v = g_config_brightness };
+		//RGB rgb = hsv_to_rgb( hsv );
+		//backlight_set_color_all( rgb.r, rgb.g, rgb.b );
+		backlight_effect_cycle_all();
+	}
+}
+
+void backlight_init_drivers(void)
+{
+	// Initialize I2C
+	i2c_init();
+	IS31FL3218_init();
+}
+
+#endif // RGB_BACKLIGHT_ENABLED
diff --git a/keyboards/rama/m6_b/rgb_backlight.h b/keyboards/rama/m6_b/rgb_backlight.h
new file mode 100644
index 000000000..bbf605284
--- /dev/null
+++ b/keyboards/rama/m6_b/rgb_backlight.h
@@ -0,0 +1,34 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#if RGB_BACKLIGHT_ENABLED
+#else
+#error rgb_backlight.h included when RGB_BACKLIGHT_ENABLED == 0
+#endif // RGB_BACKLIGHT_ENABLED
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "quantum/color.h"
+
+void backlight_init_drivers(void);
+void backlight_update_pwm_buffers(void);
+void backlight_timer_init(void);
+void backlight_timer_enable(void);
+void backlight_timer_disable(void);
+void backlight_set_suspend_state(bool state);
+
diff --git a/keyboards/rama/m6_b/rules.mk b/keyboards/rama/m6_b/rules.mk
new file mode 100644
index 000000000..8226debd4
--- /dev/null
+++ b/keyboards/rama/m6_b/rules.mk
@@ -0,0 +1,77 @@
+# project specific files
+SRC =	rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3218.c \
+		drivers/avr/i2c_master.c
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c
index 2c989d691..ee39a2025 100644
--- a/quantum/dynamic_keymap.c
+++ b/quantum/dynamic_keymap.c
@@ -17,7 +17,7 @@
 #include "config.h"
 #include "keymap.h" // to get keymaps[][][]
 #include "tmk_core/common/eeprom.h"
-#include "progmem.h"// to read default from flash
+#include "progmem.h" // to read default from flash
 
 #include "dynamic_keymap.h"
 
-- 
cgit v1.2.3-70-g09d2


From 98a63d8d6e91fcd0de4e8496d21ceef17b81d5d1 Mon Sep 17 00:00:00 2001
From: yiancar <yiangosyiangou@cytanet.com.cy>
Date: Mon, 8 Oct 2018 23:27:04 +0100
Subject: DC01 updates and I2C avr speed overwrite (#4088)

* DC01 updates and I2C avr speed overwrite

- General updating of DC01
- Made F_SCL define in AVR I2C driver overwritable from config.h

* Update drivers/avr/i2c_master.c
---
 drivers/avr/i2c_master.c     |  2 ++
 keyboards/dc01/left/config.h |  2 ++
 keyboards/dc01/left/matrix.c | 41 +++++++++++++----------------------------
 3 files changed, 17 insertions(+), 28 deletions(-)

(limited to 'drivers')

diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c
index 47c6f8e6c..a04e6570d 100755
--- a/drivers/avr/i2c_master.c
+++ b/drivers/avr/i2c_master.c
@@ -8,7 +8,9 @@
 #include "i2c_master.h"
 #include "timer.h"
 
+#ifndef F_SCL
 #define F_SCL 400000UL // SCL frequency
+#endif
 #define Prescaler 1
 #define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
 
diff --git a/keyboards/dc01/left/config.h b/keyboards/dc01/left/config.h
index 68484d835..e3d49404e 100644
--- a/keyboards/dc01/left/config.h
+++ b/keyboards/dc01/left/config.h
@@ -46,6 +46,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F1, F0, F7, F6, F5 }
 #define UNUSED_PINS
 
+#define F_SCL 300000UL
+
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c
index 792376635..806583580 100644
--- a/keyboards/dc01/left/matrix.c
+++ b/keyboards/dc01/left/matrix.c
@@ -43,7 +43,7 @@ static uint8_t error_count_arrow = 0;
 /* Set 0 if debouncing isn't needed */
 
 #ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
+#    define DEBOUNCING_DELAY 5
 #endif
 
 #if (DEBOUNCING_DELAY > 0)
@@ -135,10 +135,7 @@ uint8_t matrix_cols(void) {
     return MATRIX_COLS;
 }
 
-
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset);
-//uint8_t i2c_transaction_numpad(void);
-//uint8_t i2c_transaction_arrow(void);
 
 //this replases tmk code
 void matrix_setup(void){
@@ -220,7 +217,7 @@ uint8_t matrix_scan(void)
                 matrix[i] &= 0x3F; //mask bits to keep
             }
         }
-    }else{ //no error
+   }else{ //no error
         error_count_right = 0;
     }
     
@@ -440,40 +437,28 @@ static void unselect_cols(void)
 // Complete rows from other modules over i2c
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset) {
     i2c_status_t err = i2c_start((address << 1) | I2C_WRITE, 10);
-    if (err) return err;
-    i2c_write(0x01, 10);
-    if (err) return err;
+    i2c_write(0x01, 10); //request data in address 1
 
-    i2c_start((address << 1) | I2C_READ, 10);
-    if (err) return err;
+    i2c_start((address << 1) | I2C_READ, 5);
 
     err = i2c_read_ack(10);
     if (err == 0x55) { //synchronization byte
 
-    for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
-        matrix[i] &= mask; //mask bits to keep
-        err = i2c_read_ack(10);
-        if (err >= 0) {
-            matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-             return err;
-        }
-      }
-    //last read request must be followed by a NACK
-    matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
-    err = i2c_read_nack(10);
-    if (err >= 0) {
+        for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
+            matrix[i] &= mask; //mask bits to keep
+            err = i2c_read_ack(10);
+                matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
+            }
+        //last read request must be followed by a NACK
+        matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
+        err = i2c_read_nack(10);
         matrix[MATRIX_ROWS - 1] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-            return err;
-        }
+
     } else {
         i2c_stop(10);
         return 1;
     }
 
     i2c_stop(10);
-    if (err) return err;
-
     return 0;
 }
\ No newline at end of file
-- 
cgit v1.2.3-70-g09d2


From 7e99d869deb57251dc15620beff34d5fd53066e4 Mon Sep 17 00:00:00 2001
From: Drashna Jaelre <drashna@live.com>
Date: Mon, 22 Oct 2018 10:26:19 -0700
Subject: Remove all of the deprecated RGB defines

Fixes #3641
---
 drivers/avr/ws2812.h                             |  3 ---
 keyboards/6ball/config.h                         |  4 +---
 keyboards/9key/config.h                          |  4 +---
 keyboards/amj40/keymaps/default/rules.mk         |  3 ---
 keyboards/amj40/keymaps/fabian/rules.mk          | 10 +---------
 keyboards/amj40/keymaps/jetpacktuxedo/rules.mk   |  8 --------
 keyboards/amj40/keymaps/myee/rules.mk            | 10 +---------
 keyboards/bfo9000/config.h                       |  2 +-
 keyboards/blockey/config.h                       |  5 +----
 keyboards/chocopad/config.h                      |  4 +---
 keyboards/crkbd/rev1/config.h                    |  4 +---
 keyboards/deltasplit75/v2/config.h               |  6 ++----
 keyboards/dilly/config.h                         |  4 +---
 keyboards/ergo42/rev1/config.h                   |  4 +---
 keyboards/ergodash/mini/config.h                 |  4 +---
 keyboards/ergodash/rev1/config.h                 |  4 +---
 keyboards/ergodash/rev2/config.h                 |  4 +---
 keyboards/ergotravel/rev1/config.h               |  5 +----
 keyboards/fortitude60/rev1/config.h              |  2 +-
 keyboards/fourier/rev1/config.h                  |  4 +---
 keyboards/gh60/keymaps/dbroqua/config.h          | 13 +++----------
 keyboards/gh60/keymaps/robotmaxtron/config.h     | 13 +++----------
 keyboards/handwired/dactyl_manuform/config.h     |  4 +---
 keyboards/handwired/qc60/proto/config.h          |  2 --
 keyboards/helix/pico/config.h                    |  4 +---
 keyboards/helix/rev1/config.h                    |  5 +----
 keyboards/helix/rev2/config.h                    |  4 +---
 keyboards/iris/rev1/config.h                     |  2 +-
 keyboards/iris/rev1_led/config.h                 |  2 +-
 keyboards/iris/rev2/config.h                     |  2 +-
 keyboards/iris/rev3/config.h                     |  2 +-
 keyboards/lets_split/keymaps/zer09/config.h      |  4 +---
 keyboards/lets_split/rev1/config.h               |  4 +---
 keyboards/lets_split/rev2/config.h               |  4 +---
 keyboards/lets_split/sockets/config.h            |  4 +---
 keyboards/levinson/rev1/config.h                 |  2 +-
 keyboards/levinson/rev2/config.h                 |  2 +-
 keyboards/lily58/rev1/config.h                   |  8 +++-----
 keyboards/meira/config.h                         |  2 +-
 keyboards/minidox/keymaps/alairock/config.h      |  2 +-
 keyboards/minidox/keymaps/that_canadian/config.h |  2 +-
 keyboards/minidox/keymaps/xyverz/config.h        |  2 +-
 keyboards/mint60/config.h                        |  4 +---
 keyboards/miuni32/config.h                       |  7 +++----
 keyboards/nyquist/rev1/config.h                  |  4 +---
 keyboards/nyquist/rev2/config.h                  |  2 +-
 keyboards/orthodox/rev1/config.h                 |  3 ---
 keyboards/orthodox/rev3/config.h                 |  4 +---
 keyboards/orthodox/rev3_teensy/config.h          |  4 +---
 keyboards/preonic/keymaps/zach/config.h          |  2 +-
 keyboards/qwertyydox/config.h                    |  4 +---
 keyboards/qwertyydox/rev1/config.h               |  4 +---
 keyboards/redox/rev1/config.h                    |  4 +---
 keyboards/the_ruler/config.h                     |  3 +--
 keyboards/vitamins_included/rev1/config.h        |  4 +---
 keyboards/viterbi/rev1/config.h                  |  4 +---
 keyboards/wavelet/config.h                       |  2 +-
 keyboards/zen/rev1/config.h                      |  4 +---
 58 files changed, 62 insertions(+), 180 deletions(-)

(limited to 'drivers')

diff --git a/drivers/avr/ws2812.h b/drivers/avr/ws2812.h
index f7e0c3144..1f9299ffb 100644
--- a/drivers/avr/ws2812.h
+++ b/drivers/avr/ws2812.h
@@ -69,7 +69,4 @@ void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
 #define CONCAT_EXP(a, b)   CONCAT(a, b)
 #endif
 
-// #define ws2812_PORTREG  CONCAT_EXP(PORT,ws2812_port)
-// #define ws2812_DDRREG   CONCAT_EXP(DDR,ws2812_port)
-
 #endif /* LIGHT_WS2812_H_ */
diff --git a/keyboards/6ball/config.h b/keyboards/6ball/config.h
index 19d24486c..b0e59f20c 100644
--- a/keyboards/6ball/config.h
+++ b/keyboards/6ball/config.h
@@ -39,11 +39,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN F7
-#define RGBLIGHT_TIMER
+
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 6    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/9key/config.h b/keyboards/9key/config.h
index eee8407cc..4e5a2fd45 100644
--- a/keyboards/9key/config.h
+++ b/keyboards/9key/config.h
@@ -39,10 +39,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN F7
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 1    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/amj40/keymaps/default/rules.mk b/keyboards/amj40/keymaps/default/rules.mk
index 41a198224..fe9867220 100644
--- a/keyboards/amj40/keymaps/default/rules.mk
+++ b/keyboards/amj40/keymaps/default/rules.mk
@@ -18,9 +18,6 @@ RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/amj40/keymaps/fabian/rules.mk b/keyboards/amj40/keymaps/fabian/rules.mk
index 7e0634e09..90559e0dd 100644
--- a/keyboards/amj40/keymaps/fabian/rules.mk
+++ b/keyboards/amj40/keymaps/fabian/rules.mk
@@ -1,5 +1,5 @@
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
@@ -17,11 +17,3 @@ RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/keyboards/amj40/keymaps/jetpacktuxedo/rules.mk b/keyboards/amj40/keymaps/jetpacktuxedo/rules.mk
index 6ad923668..2b613b28e 100644
--- a/keyboards/amj40/keymaps/jetpacktuxedo/rules.mk
+++ b/keyboards/amj40/keymaps/jetpacktuxedo/rules.mk
@@ -17,11 +17,3 @@ RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.
 
 # Do not enable SLEEP_LED_ENABLE. It uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/keyboards/amj40/keymaps/myee/rules.mk b/keyboards/amj40/keymaps/myee/rules.mk
index c35191cef..fe07e43d8 100644
--- a/keyboards/amj40/keymaps/myee/rules.mk
+++ b/keyboards/amj40/keymaps/myee/rules.mk
@@ -1,5 +1,5 @@
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
@@ -17,11 +17,3 @@ RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/keyboards/bfo9000/config.h b/keyboards/bfo9000/config.h
index 561d2d114..893fa5ab6 100644
--- a/keyboards/bfo9000/config.h
+++ b/keyboards/bfo9000/config.h
@@ -53,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B4
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 20    // Number of LEDs
 
 /*
diff --git a/keyboards/blockey/config.h b/keyboards/blockey/config.h
index b099a816b..53860bfbc 100644
--- a/keyboards/blockey/config.h
+++ b/keyboards/blockey/config.h
@@ -51,11 +51,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B1
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 4
-#define ws2812_PORTREG  PORTB
-#define ws2812_DDRREG   DDRB
 
+#define RGBLED_NUM 4
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 
diff --git a/keyboards/chocopad/config.h b/keyboards/chocopad/config.h
index 2163ff8bc..d2a1a7b48 100644
--- a/keyboards/chocopad/config.h
+++ b/keyboards/chocopad/config.h
@@ -47,9 +47,7 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 4
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 #endif
diff --git a/keyboards/crkbd/rev1/config.h b/keyboards/crkbd/rev1/config.h
index efce13a49..915779060 100644
--- a/keyboards/crkbd/rev1/config.h
+++ b/keyboards/crkbd/rev1/config.h
@@ -57,10 +57,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/deltasplit75/v2/config.h b/keyboards/deltasplit75/v2/config.h
index 319a149fb..475a5c9dc 100644
--- a/keyboards/deltasplit75/v2/config.h
+++ b/keyboards/deltasplit75/v2/config.h
@@ -61,10 +61,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
@@ -85,4 +83,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_FUNCTION
 
 
-#endif
\ No newline at end of file
+#endif
diff --git a/keyboards/dilly/config.h b/keyboards/dilly/config.h
index d9ca4597c..084186fc6 100644
--- a/keyboards/dilly/config.h
+++ b/keyboards/dilly/config.h
@@ -50,9 +50,7 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 10
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 #endif
diff --git a/keyboards/ergo42/rev1/config.h b/keyboards/ergo42/rev1/config.h
index 1a674a858..a7edb4097 100644
--- a/keyboards/ergo42/rev1/config.h
+++ b/keyboards/ergo42/rev1/config.h
@@ -66,10 +66,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/ergodash/mini/config.h b/keyboards/ergodash/mini/config.h
index a7be1635c..11cff145e 100644
--- a/keyboards/ergodash/mini/config.h
+++ b/keyboards/ergodash/mini/config.h
@@ -73,10 +73,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 20    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/ergodash/rev1/config.h b/keyboards/ergodash/rev1/config.h
index 09dd6604e..d3f3314ee 100644
--- a/keyboards/ergodash/rev1/config.h
+++ b/keyboards/ergodash/rev1/config.h
@@ -63,10 +63,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 24    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/ergodash/rev2/config.h b/keyboards/ergodash/rev2/config.h
index 489afe017..5f9c68991 100644
--- a/keyboards/ergodash/rev2/config.h
+++ b/keyboards/ergodash/rev2/config.h
@@ -70,10 +70,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 24    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/ergotravel/rev1/config.h b/keyboards/ergotravel/rev1/config.h
index 5fa447da7..3af1147a7 100644
--- a/keyboards/ergotravel/rev1/config.h
+++ b/keyboards/ergotravel/rev1/config.h
@@ -61,10 +61,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
@@ -83,4 +81,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
diff --git a/keyboards/fortitude60/rev1/config.h b/keyboards/fortitude60/rev1/config.h
index 8c6f21afe..b89f5c7df 100644
--- a/keyboards/fortitude60/rev1/config.h
+++ b/keyboards/fortitude60/rev1/config.h
@@ -66,7 +66,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #ifdef RGBLIGHT_ENABLE
   #define RGB_DI_PIN B5
-  #define RGBLIGHT_TIMER
+  
   #define RGBLED_NUM 18    // Number of LEDs */
 #endif
 /*
diff --git a/keyboards/fourier/rev1/config.h b/keyboards/fourier/rev1/config.h
index c13752226..3bd67228c 100644
--- a/keyboards/fourier/rev1/config.h
+++ b/keyboards/fourier/rev1/config.h
@@ -56,11 +56,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 14    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/gh60/keymaps/dbroqua/config.h b/keyboards/gh60/keymaps/dbroqua/config.h
index 0b8218d28..fd63c9a8f 100644
--- a/keyboards/gh60/keymaps/dbroqua/config.h
+++ b/keyboards/gh60/keymaps/dbroqua/config.h
@@ -158,26 +158,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /*
  * RGB Underglow
  * These settings are for the F4 by default:
- * 
  *
- * #define ws2812_PORTREG  PORTF
- * #define ws2812_DDRREG   DDRF
+ *
  * #define ws2812_pin PF4
  * #define RGBLED_NUM 14     // Number of LEDs
  * #define RGBLIGHT_HUE_STEP 10
  * #define RGBLIGHT_SAT_STEP 17
  * #define RGBLIGHT_VAL_STEP 17
  *
- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 
- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 
+ * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
+ * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
  * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
 */
 
-/* Deprecated code below
-#define ws2812_PORTREG  PORTF 
-#define ws2812_DDRREG   DDRF
-#define ws2812_pin PF4
-*/ 
 #define RGB_DI_PIN F4
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 11         // Number of LEDs
diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h
index abaddb71f..925a69efe 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/config.h
+++ b/keyboards/gh60/keymaps/robotmaxtron/config.h
@@ -161,26 +161,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /*
  * RGB Underglow
  * These settings are for the F4 by default:
- * 
  *
- * #define ws2812_PORTREG  PORTF
- * #define ws2812_DDRREG   DDRF
+ *
  * #define ws2812_pin PF4
  * #define RGBLED_NUM 14     // Number of LEDs
  * #define RGBLIGHT_HUE_STEP 10
  * #define RGBLIGHT_SAT_STEP 17
  * #define RGBLIGHT_VAL_STEP 17
  *
- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 
- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 
+ * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
+ * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
  * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
 */
 
-/* Deprecated code below
-#define ws2812_PORTREG  PORTF 
-#define ws2812_DDRREG   DDRF
-#define ws2812_pin PF4
-*/ 
 #define RGB_DI_PIN F4
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 8         // Number of LEDs
diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h
index 19cd356d8..320ce3c48 100644
--- a/keyboards/handwired/dactyl_manuform/config.h
+++ b/keyboards/handwired/dactyl_manuform/config.h
@@ -53,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 
 
@@ -74,5 +74,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-
diff --git a/keyboards/handwired/qc60/proto/config.h b/keyboards/handwired/qc60/proto/config.h
index 81466b019..8c21fa926 100644
--- a/keyboards/handwired/qc60/proto/config.h
+++ b/keyboards/handwired/qc60/proto/config.h
@@ -10,5 +10,3 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 1    // Number of LEDs
-// #define ws2812_PORTREG  PORTD
-// #define ws2812_DDRREG   DDRD
diff --git a/keyboards/helix/pico/config.h b/keyboards/helix/pico/config.h
index 41edfcbc2..b8822e227 100644
--- a/keyboards/helix/pico/config.h
+++ b/keyboards/helix/pico/config.h
@@ -83,10 +83,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 //#define RGBLED_NUM 12    // Number of LEDs. see ./keymaps/default/config.h
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 // Helix keyboard RGB LED support
 //#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no
diff --git a/keyboards/helix/rev1/config.h b/keyboards/helix/rev1/config.h
index 7fec62fc8..07b5c4f6f 100644
--- a/keyboards/helix/rev1/config.h
+++ b/keyboards/helix/rev1/config.h
@@ -74,11 +74,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
+#define RGBLED_NUM 12    // Number of LEDs
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/helix/rev2/config.h b/keyboards/helix/rev2/config.h
index b354d312d..f7d35b371 100644
--- a/keyboards/helix/rev2/config.h
+++ b/keyboards/helix/rev2/config.h
@@ -87,10 +87,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 //#define RGBLED_NUM 12    // Number of LEDs. see ./keymaps/default/config.h
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 // Helix keyboard RGB LED support
 //#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no
diff --git a/keyboards/iris/rev1/config.h b/keyboards/iris/rev1/config.h
index cc7f2d8d4..3c088f671 100644
--- a/keyboards/iris/rev1/config.h
+++ b/keyboards/iris/rev1/config.h
@@ -63,7 +63,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 
 /*
diff --git a/keyboards/iris/rev1_led/config.h b/keyboards/iris/rev1_led/config.h
index e9eac2455..d8571f8da 100644
--- a/keyboards/iris/rev1_led/config.h
+++ b/keyboards/iris/rev1_led/config.h
@@ -63,7 +63,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 
 /*
diff --git a/keyboards/iris/rev2/config.h b/keyboards/iris/rev2/config.h
index 368d21c98..087e0f69e 100644
--- a/keyboards/iris/rev2/config.h
+++ b/keyboards/iris/rev2/config.h
@@ -63,7 +63,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 
 /*
diff --git a/keyboards/iris/rev3/config.h b/keyboards/iris/rev3/config.h
index 7f68180c2..3329a4edb 100644
--- a/keyboards/iris/rev3/config.h
+++ b/keyboards/iris/rev3/config.h
@@ -63,7 +63,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN F7
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 
 /*
diff --git a/keyboards/lets_split/keymaps/zer09/config.h b/keyboards/lets_split/keymaps/zer09/config.h
index 73438d8a9..14be4ccc5 100644
--- a/keyboards/lets_split/keymaps/zer09/config.h
+++ b/keyboards/lets_split/keymaps/zer09/config.h
@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #undef RGBLED_NUM
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 50
-#define ws2812_PORTREG PORTD
-#define ws2812_DDRREG DDRD
 #endif
diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h
index 73f90e715..c0e4d1fbc 100644
--- a/keyboards/lets_split/rev1/config.h
+++ b/keyboards/lets_split/rev1/config.h
@@ -60,10 +60,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 16    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h
index 1c48f38e0..1ff25cd48 100644
--- a/keyboards/lets_split/rev2/config.h
+++ b/keyboards/lets_split/rev2/config.h
@@ -60,10 +60,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/lets_split/sockets/config.h b/keyboards/lets_split/sockets/config.h
index d004b26bd..a45cdd13b 100644
--- a/keyboards/lets_split/sockets/config.h
+++ b/keyboards/lets_split/sockets/config.h
@@ -60,10 +60,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D4
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /* Audio settings */
 #ifdef AUDIO_ENABLE
diff --git a/keyboards/levinson/rev1/config.h b/keyboards/levinson/rev1/config.h
index 52a644e82..8161b4e32 100644
--- a/keyboards/levinson/rev1/config.h
+++ b/keyboards/levinson/rev1/config.h
@@ -53,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 
 /* Backlight LEDs */
diff --git a/keyboards/levinson/rev2/config.h b/keyboards/levinson/rev2/config.h
index 4845c935e..03b98b45c 100644
--- a/keyboards/levinson/rev2/config.h
+++ b/keyboards/levinson/rev2/config.h
@@ -53,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 
 /* Backlight LEDs */
diff --git a/keyboards/lily58/rev1/config.h b/keyboards/lily58/rev1/config.h
index 9413e8d4a..a991e8832 100644
--- a/keyboards/lily58/rev1/config.h
+++ b/keyboards/lily58/rev1/config.h
@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFC51
-#define PRODUCT_ID      0x0058 
+#define PRODUCT_ID      0x0058
 #define DEVICE_VER      0x0100
 #define MANUFACTURER    F_YUUCHI
 #define PRODUCT         Lily58
@@ -62,10 +62,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 14    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
@@ -83,4 +81,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
\ No newline at end of file
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/meira/config.h b/keyboards/meira/config.h
index 5e9dd6837..ff39f90eb 100644
--- a/keyboards/meira/config.h
+++ b/keyboards/meira/config.h
@@ -42,7 +42,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 15    // Number of LEDs
 #endif
 
diff --git a/keyboards/minidox/keymaps/alairock/config.h b/keyboards/minidox/keymaps/alairock/config.h
index 3649fdd12..6b0069f4b 100644
--- a/keyboards/minidox/keymaps/alairock/config.h
+++ b/keyboards/minidox/keymaps/alairock/config.h
@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D7
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 8   // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 10
diff --git a/keyboards/minidox/keymaps/that_canadian/config.h b/keyboards/minidox/keymaps/that_canadian/config.h
index 5832d1866..b85609127 100644
--- a/keyboards/minidox/keymaps/that_canadian/config.h
+++ b/keyboards/minidox/keymaps/that_canadian/config.h
@@ -29,7 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D7
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 8   // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 10
diff --git a/keyboards/minidox/keymaps/xyverz/config.h b/keyboards/minidox/keymaps/xyverz/config.h
index 6d7b6256a..ae26f9499 100644
--- a/keyboards/minidox/keymaps/xyverz/config.h
+++ b/keyboards/minidox/keymaps/xyverz/config.h
@@ -29,7 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D7
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 8   // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 10
diff --git a/keyboards/mint60/config.h b/keyboards/mint60/config.h
index 51c586e63..a762c5ffe 100644
--- a/keyboards/mint60/config.h
+++ b/keyboards/mint60/config.h
@@ -152,10 +152,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 8
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h
index 9f26b2291..a56a818f5 100644
--- a/keyboards/miuni32/config.h
+++ b/keyboards/miuni32/config.h
@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Bigtuna.io 
+#define MANUFACTURER    Bigtuna.io
 #define PRODUCT         Miuni32
 #define DESCRIPTION     A custom keyboard for writers
 
@@ -48,7 +48,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
- 
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
@@ -159,9 +159,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#define RGBLIGHT_TIMER 
+
 #define RGB_DI_PIN D0     // The pin your RGB strip is wired to
-#define RGBLIGHT_TIMER    // Require for fancier stuff (not compatible with audio)
 #define RGBLED_NUM 7     // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 10
diff --git a/keyboards/nyquist/rev1/config.h b/keyboards/nyquist/rev1/config.h
index 61bcb80e2..eec084ecc 100644
--- a/keyboards/nyquist/rev1/config.h
+++ b/keyboards/nyquist/rev1/config.h
@@ -61,10 +61,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 16    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/nyquist/rev2/config.h b/keyboards/nyquist/rev2/config.h
index 75d2e9393..ab062c920 100644
--- a/keyboards/nyquist/rev2/config.h
+++ b/keyboards/nyquist/rev2/config.h
@@ -58,7 +58,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 16    // Number of LEDs
 
 /* Backlight LEDs */
diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h
index 98c24c8c0..03936e737 100644
--- a/keyboards/orthodox/rev1/config.h
+++ b/keyboards/orthodox/rev1/config.h
@@ -70,10 +70,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 //#define RGB_DI_PIN D3
-//#define RGBLIGHT_TIMER
 //#define RGBLED_NUM 16    // Number of LEDs
-//#define ws2812_PORTREG  PORTD
-//#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/orthodox/rev3/config.h b/keyboards/orthodox/rev3/config.h
index 851499176..2e4018e91 100644
--- a/keyboards/orthodox/rev3/config.h
+++ b/keyboards/orthodox/rev3/config.h
@@ -75,10 +75,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 //#define RGB_DI_PIN D3
-//#define RGBLIGHT_TIMER
+
 //#define RGBLED_NUM 16    // Number of LEDs
-//#define ws2812_PORTREG  PORTD
-//#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/orthodox/rev3_teensy/config.h b/keyboards/orthodox/rev3_teensy/config.h
index daba627fa..e2e693079 100644
--- a/keyboards/orthodox/rev3_teensy/config.h
+++ b/keyboards/orthodox/rev3_teensy/config.h
@@ -67,10 +67,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 //#define RGB_DI_PIN D3
-//#define RGBLIGHT_TIMER
+
 //#define RGBLED_NUM 16    // Number of LEDs
-//#define ws2812_PORTREG  PORTD
-//#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/preonic/keymaps/zach/config.h b/keyboards/preonic/keymaps/zach/config.h
index 40a083da3..25f88afdc 100644
--- a/keyboards/preonic/keymaps/zach/config.h
+++ b/keyboards/preonic/keymaps/zach/config.h
@@ -65,7 +65,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 //#define RGB_DI_PIN D1
-//#define RGBLIGHT_TIMER
+
 //#define RGBLED_NUM 28     // Number of LEDs
 //#define RGBLIGHT_HUE_STEP 10
 //#define RGBLIGHT_SAT_STEP 17
diff --git a/keyboards/qwertyydox/config.h b/keyboards/qwertyydox/config.h
index 5c4f8a6b2..b22ca534e 100644
--- a/keyboards/qwertyydox/config.h
+++ b/keyboards/qwertyydox/config.h
@@ -64,10 +64,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D6
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/qwertyydox/rev1/config.h b/keyboards/qwertyydox/rev1/config.h
index c5c4daa3d..3d4c9b0d0 100644
--- a/keyboards/qwertyydox/rev1/config.h
+++ b/keyboards/qwertyydox/rev1/config.h
@@ -64,10 +64,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D6
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 
 /*
diff --git a/keyboards/redox/rev1/config.h b/keyboards/redox/rev1/config.h
index f8041f235..fe951f722 100644
--- a/keyboards/redox/rev1/config.h
+++ b/keyboards/redox/rev1/config.h
@@ -62,10 +62,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 14    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/the_ruler/config.h b/keyboards/the_ruler/config.h
index 16135bbd1..e72875c76 100644
--- a/keyboards/the_ruler/config.h
+++ b/keyboards/the_ruler/config.h
@@ -155,9 +155,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#define RGBLIGHT_TIMER 
+
 #define RGB_DI_PIN E6     // The pin your RGB strip is wired to
-#define RGBLIGHT_TIMER    // Require for fancier stuff (not compatible with audio)
 #define RGBLED_NUM 1      // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 10
diff --git a/keyboards/vitamins_included/rev1/config.h b/keyboards/vitamins_included/rev1/config.h
index 26023bfea..0347477ee 100644
--- a/keyboards/vitamins_included/rev1/config.h
+++ b/keyboards/vitamins_included/rev1/config.h
@@ -59,10 +59,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN F0
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 16    // Number of LEDs
-#define ws2812_PORTREG  PORTF
-#define ws2812_DDRREG   DDRF
 #define RGBLIGHT_ANIMATIONS
 
 /* Audio settings */
diff --git a/keyboards/viterbi/rev1/config.h b/keyboards/viterbi/rev1/config.h
index 3400ea31a..d6a66408e 100644
--- a/keyboards/viterbi/rev1/config.h
+++ b/keyboards/viterbi/rev1/config.h
@@ -61,10 +61,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 16    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
diff --git a/keyboards/wavelet/config.h b/keyboards/wavelet/config.h
index 4e45ef8e1..ac6c96696 100644
--- a/keyboards/wavelet/config.h
+++ b/keyboards/wavelet/config.h
@@ -53,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 
 /* Backlight LEDs */
diff --git a/keyboards/zen/rev1/config.h b/keyboards/zen/rev1/config.h
index efae55892..890d30757 100644
--- a/keyboards/zen/rev1/config.h
+++ b/keyboards/zen/rev1/config.h
@@ -65,10 +65,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D1
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 16    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
 
 /*
  * Feature disable options
-- 
cgit v1.2.3-70-g09d2


From 408361402385ea938575956e9368b5f373edc629 Mon Sep 17 00:00:00 2001
From: yiancar <yiangosyiangou@cytanet.com.cy>
Date: Sat, 10 Nov 2018 12:26:39 -0800
Subject: I2C driver docs (#4298)

* I2C driver docs

- Added I2C driver docs.
- Changed arm master i2c driver to have a weak i2c_init as it is impossible to account for all possible port configuration in the STM32 world.

* Update docs/i2c_driver.md

Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>

* Update docs/i2c_driver.md

Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>

* Update docs/i2c_driver.md

Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>

* Update docs/i2c_driver.md

Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>

* GPIO release fix
---
 docs/_sidebar.md         |  1 +
 docs/_summary.md         |  1 +
 docs/i2c_driver.md       | 83 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/arm/i2c_master.c |  5 ++-
 4 files changed, 89 insertions(+), 1 deletion(-)
 create mode 100644 docs/i2c_driver.md

(limited to 'drivers')

diff --git a/docs/_sidebar.md b/docs/_sidebar.md
index 2c5738012..67e81422a 100644
--- a/docs/_sidebar.md
+++ b/docs/_sidebar.md
@@ -79,6 +79,7 @@
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
+  * [I2C Driver](i2c_driver.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)
diff --git a/docs/_summary.md b/docs/_summary.md
index 2c5738012..67e81422a 100644
--- a/docs/_summary.md
+++ b/docs/_summary.md
@@ -79,6 +79,7 @@
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
+  * [I2C Driver](i2c_driver.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)
diff --git a/docs/i2c_driver.md b/docs/i2c_driver.md
new file mode 100644
index 000000000..f69eb5a9d
--- /dev/null
+++ b/docs/i2c_driver.md
@@ -0,0 +1,83 @@
+# I2C Master Driver
+
+The I2C Master drivers used in QMK have a set of common functions to allow portability between MCUs.
+
+## Available functions
+
+|Function                                                                                                          |Description                                                                                                                                                                  |
+|------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|`void i2c_init(void);`                                                                                            |Initializes the I2C driver. This function should be called once before any transaction is initiated.                                                                         |
+|`uint8_t i2c_start(uint8_t address);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
+|`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction.                                                                                            |
+|`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
+|`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
+|`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
+|`uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
+|`uint8_t i2c_stop(uint16_t timeout);`                                                                             |Stops the I2C driver.                                                                                                                                                        |
+
+### Function Return
+
+All the above functions, except `void i2c_init(void);` return the following truth table:
+
+|Return Value   |Description                                        |
+|---------------|---------------------------------------------------|
+|0              |Operation executed successfully.                   |
+|-1             |Operation failed.                                  |
+|-2             |Operation timed out.                               |
+
+
+## AVR
+
+### Configuration
+
+The following defines can be used to configure the I2C master driver.
+
+|Variable          |Description                                        |Default|
+|------------------|---------------------------------------------------|-------|
+|`#F_SCL`          |Clock frequency in Hz                              |400KHz |
+|`#Prescaler`      |Divides master clock to aid in I2C clock selection |1      |
+
+AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required.
+
+## ARM
+
+For ARM the Chibios I2C HAL driver is under the hood.
+This section assumes an STM32 MCU.
+
+### Configuration
+
+The configuration for ARM MCUs can be quite complex as often there are multiple I2C drivers which can be assigned to a variety of ports.
+
+Firstly the `mcuconf.h` file must be setup to enable the necessary hardware drivers.
+
+|Variable                      |Description                                                                        |Default|
+|------------------------------|------------------------------------------------------------------------------------|-------|
+|`#STM32_I2C_USE_XXX`          |Enable/Disable the hardware driver XXX (each driver should be explicitly listed)    |FALSE  |
+|`#STM32_I2C_BUSY_TIMEOUT`     |Time in ms until the I2C command is aborted if no response is received              |50     |
+|`#STM32_I2C_XXX_IRQ_PRIORITY` |Interrupt priority for hardware driver XXX (THIS IS AN EXPERT SETTING)              |10     |
+|`#STM32_I2C_USE_DMA`          |Enable/Disable the ability of the MCU to offload the data transfer to the DMA unit  |TRUE   |
+|`#STM32_I2C_XXX_DMA_PRIORITY` |Priority of DMA unit for hardware driver XXX (THIS IS AN EXPERT SETTING)            |1      |
+
+Secondly, in the `halconf.h` file, `#define HAL_USE_I2C` must be set to `TRUE`. This allows ChibiOS to load its I2C driver.
+
+Lastly, we need to assign the correct GPIO pins depending on the I2C hardware driver we want to use.
+
+By default the I2C1 hardware driver is assumed to be used. If another hardware driver is used,  `#define I2C_DRIVER I2CDX` should be added to the `config.h` file with X being the number of hardware driver used. For example is I2C3 is enabled, the `config.h` file should contain `#define I2C_DRIVER I2CD3`. This aligns the QMK I2C driver with the Chibios I2C driver.
+
+STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C.
+
+This can be changed by declaring the `i2c_init` function which intentionally has a weak attribute. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
+
+```C
+void i2c_init(void)
+{
+  setPinInput(B6); // Try releasing special pins for a short time
+  setPinInput(B7);
+  chThdSleepMilliseconds(10); // Wait for the release to happen
+
+  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function
+  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function
+}
+```
+
+
diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c
index 2a7badd35..de5843839 100644
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -26,6 +26,7 @@
  */
 
 #include "i2c_master.h"
+#include "quantum.h"
 #include <string.h>
 #include <hal.h>
 
@@ -41,9 +42,11 @@ static const I2CConfig i2cconfig = {
   0
 };
 
+__attribute__ ((weak))
 void i2c_init(void)
 {
-  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
+  setPinInput(B6); // Try releasing special pins for a short time
+  setPinInput(B7);
   chThdSleepMilliseconds(10);
 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
-- 
cgit v1.2.3-70-g09d2


From 4099536c0e7a099b181a80e483b4b95f389b5a7e Mon Sep 17 00:00:00 2001
From: ishtob <ishtob@gmail.com>
Date: Tue, 4 Dec 2018 11:04:57 -0500
Subject: adding Hadron v3 keyboard, QWIIC devices support, haptic feedback
 support (#4462)

* add initial support for hadron ver3

* add initial support for hadron ver3

* pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display

* initial work on OLED using qwiic driver

* early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality

* moved oled defines to config.h and added ifndef to micro_oled driver

* WORKING :D - note, still work in progress to get the start location correct on the 128x32 display.

* added equation to automatically calculate display offset based on screen width

* adding time-out timer to oled display

* changed read lock staus via read_led_state

* lock indications fixes

* Added scroll lock indication to oled

* add support for DRV2605 haptic driver

* Improve readabiity of DRV2605 driver.
-added typedef for waveform library
-added unions for registers

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Fixes for PR

* PR fixes

* fix old persistent layer function to use new set_single_persistent_default_layer

* fix issues with changing makefile defines that broken per-key haptic pulse

* Comment fixes

* Add definable parameter and auto-calibration based on motor choice
---
 common_features.mk                                 |    9 +
 drivers/arm/i2c_master.c                           |   12 +-
 drivers/arm/i2c_master.h                           |    1 +
 drivers/haptic/DRV2605L.c                          |  129 +++
 drivers/haptic/DRV2605L.h                          |  394 +++++++
 drivers/qwiic/micro_oled.c                         |  691 ++++++++++++
 drivers/qwiic/micro_oled.h                         |  134 +++
 drivers/qwiic/qwiic.c                              |   31 +
 drivers/qwiic/qwiic.h                              |   28 +
 drivers/qwiic/qwiic.mk                             |   18 +
 drivers/qwiic/util/font5x7.h                       |  288 +++++
 drivers/qwiic/util/font8x16.h                      |  127 +++
 keyboards/hadron/config.h                          |   10 +-
 keyboards/hadron/hadron.c                          |   24 -
 keyboards/hadron/hadron.h                          |    4 +-
 keyboards/hadron/keymaps/default/config.h          |   20 -
 keyboards/hadron/keymaps/default/keymap.c          |  493 --------
 keyboards/hadron/keymaps/default/readme.md         |    2 -
 keyboards/hadron/keymaps/default/rules.mk          |   24 -
 keyboards/hadron/keymaps/readme.md                 |   23 -
 keyboards/hadron/keymaps/side_numpad/config.h      |   20 -
 keyboards/hadron/keymaps/side_numpad/keymap.c      |  502 ---------
 keyboards/hadron/keymaps/side_numpad/readme.md     |    2 -
 keyboards/hadron/keymaps/side_numpad/rules.mk      |   26 -
 keyboards/hadron/readme.md                         |    4 +-
 keyboards/hadron/rules.mk                          |   73 --
 keyboards/hadron/ver2/config.h                     |   11 +
 keyboards/hadron/ver2/keymaps/default/config.h     |    9 +
 keyboards/hadron/ver2/keymaps/default/keymap.c     |  448 ++++++++
 keyboards/hadron/ver2/keymaps/default/readme.md    |    2 +
 keyboards/hadron/ver2/keymaps/readme.md            |   23 +
 keyboards/hadron/ver2/keymaps/side_numpad/config.h |    8 +
 keyboards/hadron/ver2/keymaps/side_numpad/keymap.c |  484 ++++++++
 .../hadron/ver2/keymaps/side_numpad/readme.md      |    2 +
 keyboards/hadron/ver2/keymaps/side_numpad/rules.mk |   26 +
 keyboards/hadron/ver2/rules.mk                     |   77 +-
 keyboards/hadron/ver2/ver2.c                       |   27 +-
 .../ver3/boards/GENERIC_STM32_F303XC/board.c       |  126 +++
 .../ver3/boards/GENERIC_STM32_F303XC/board.h       | 1187 ++++++++++++++++++++
 .../ver3/boards/GENERIC_STM32_F303XC/board.mk      |    5 +
 keyboards/hadron/ver3/bootloader_defs.h            |    7 +
 keyboards/hadron/ver3/chconf.h                     |  520 +++++++++
 keyboards/hadron/ver3/config.h                     |  192 ++++
 keyboards/hadron/ver3/halconf.h                    |  388 +++++++
 keyboards/hadron/ver3/keymaps/default/config.h     |    1 +
 keyboards/hadron/ver3/keymaps/default/keymap.c     |  295 +++++
 keyboards/hadron/ver3/keymaps/default/readme.md    |    2 +
 keyboards/hadron/ver3/keymaps/readme.md            |   23 +
 keyboards/hadron/ver3/matrix.c                     |  195 ++++
 keyboards/hadron/ver3/mcuconf.h                    |  257 +++++
 keyboards/hadron/ver3/rev3.h                       |   21 +
 keyboards/hadron/ver3/rules.mk                     |   57 +
 keyboards/hadron/ver3/ver3.c                       |  196 ++++
 keyboards/hadron/ver3/ver3.h                       |   21 +
 keyboards/helix/rev1/keymaps/OLED_sample/rules.mk  |   25 -
 tmk_core/common/action_layer.h                     |    4 +-
 tmk_core/common/keyboard.c                         |   10 +
 57 files changed, 6487 insertions(+), 1251 deletions(-)
 create mode 100644 drivers/haptic/DRV2605L.c
 create mode 100644 drivers/haptic/DRV2605L.h
 create mode 100644 drivers/qwiic/micro_oled.c
 create mode 100644 drivers/qwiic/micro_oled.h
 create mode 100644 drivers/qwiic/qwiic.c
 create mode 100644 drivers/qwiic/qwiic.h
 create mode 100644 drivers/qwiic/qwiic.mk
 create mode 100644 drivers/qwiic/util/font5x7.h
 create mode 100644 drivers/qwiic/util/font8x16.h
 delete mode 100644 keyboards/hadron/keymaps/default/config.h
 delete mode 100644 keyboards/hadron/keymaps/default/keymap.c
 delete mode 100644 keyboards/hadron/keymaps/default/readme.md
 delete mode 100644 keyboards/hadron/keymaps/default/rules.mk
 delete mode 100644 keyboards/hadron/keymaps/readme.md
 delete mode 100644 keyboards/hadron/keymaps/side_numpad/config.h
 delete mode 100644 keyboards/hadron/keymaps/side_numpad/keymap.c
 delete mode 100644 keyboards/hadron/keymaps/side_numpad/readme.md
 delete mode 100644 keyboards/hadron/keymaps/side_numpad/rules.mk
 create mode 100644 keyboards/hadron/ver2/keymaps/default/config.h
 create mode 100644 keyboards/hadron/ver2/keymaps/default/keymap.c
 create mode 100644 keyboards/hadron/ver2/keymaps/default/readme.md
 create mode 100644 keyboards/hadron/ver2/keymaps/readme.md
 create mode 100644 keyboards/hadron/ver2/keymaps/side_numpad/config.h
 create mode 100644 keyboards/hadron/ver2/keymaps/side_numpad/keymap.c
 create mode 100644 keyboards/hadron/ver2/keymaps/side_numpad/readme.md
 create mode 100644 keyboards/hadron/ver2/keymaps/side_numpad/rules.mk
 create mode 100644 keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.c
 create mode 100644 keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.h
 create mode 100644 keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.mk
 create mode 100644 keyboards/hadron/ver3/bootloader_defs.h
 create mode 100644 keyboards/hadron/ver3/chconf.h
 create mode 100644 keyboards/hadron/ver3/config.h
 create mode 100644 keyboards/hadron/ver3/halconf.h
 create mode 100644 keyboards/hadron/ver3/keymaps/default/config.h
 create mode 100644 keyboards/hadron/ver3/keymaps/default/keymap.c
 create mode 100644 keyboards/hadron/ver3/keymaps/default/readme.md
 create mode 100644 keyboards/hadron/ver3/keymaps/readme.md
 create mode 100644 keyboards/hadron/ver3/matrix.c
 create mode 100644 keyboards/hadron/ver3/mcuconf.h
 create mode 100644 keyboards/hadron/ver3/rev3.h
 create mode 100644 keyboards/hadron/ver3/rules.mk
 create mode 100644 keyboards/hadron/ver3/ver3.c
 create mode 100644 keyboards/hadron/ver3/ver3.h
 delete mode 100644 keyboards/helix/rev1/keymaps/OLED_sample/rules.mk

(limited to 'drivers')

diff --git a/common_features.mk b/common_features.mk
index 8f53a82aa..bd88e04d6 100644
--- a/common_features.mk
+++ b/common_features.mk
@@ -225,6 +225,13 @@ ifeq ($(strip $(ENCODER_ENABLE)), yes)
     OPT_DEFS += -DENCODER_ENABLE
 endif
 
+ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L)
+    COMMON_VPATH += $(DRIVER_PATH)/haptic
+    SRC += DRV2605L.c
+    SRC += i2c_master.c
+    OPT_DEFS += -DDRV2605L
+endif
+
 ifeq ($(strip $(HD44780_ENABLE)), yes)
     SRC += drivers/avr/hd44780.c
     OPT_DEFS += -DHD44780_ENABLE
@@ -240,6 +247,8 @@ ifeq ($(strip $(LEADER_ENABLE)), yes)
   OPT_DEFS += -DLEADER_ENABLE
 endif
 
+include $(DRIVER_PATH)/qwiic/qwiic.mk
+
 QUANTUM_SRC:= \
     $(QUANTUM_DIR)/quantum.c \
     $(QUANTUM_DIR)/keymap_common.c \
diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c
index de5843839..ab962ea95 100644
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -32,7 +32,7 @@
 
 static uint8_t i2c_address;
 
-// This configures the I2C clock to 400Mhz assuming a 72Mhz clock
+// This configures the I2C clock to 400khz assuming a 72Mhz clock
 // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 static const I2CConfig i2cconfig = {
   STM32_TIMINGR_PRESC(15U) |
@@ -45,10 +45,14 @@ static const I2CConfig i2cconfig = {
 __attribute__ ((weak))
 void i2c_init(void)
 {
-  setPinInput(B6); // Try releasing special pins for a short time
-  setPinInput(B7);
-  chThdSleepMilliseconds(10);
+  //palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT);
+
+  // Try releasing special pins for a short time
+  palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
+  palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
 
+  chThdSleepMilliseconds(10);
+ 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
   palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
 
diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h
index 591fa7f77..392760328 100644
--- a/drivers/arm/i2c_master.h
+++ b/drivers/arm/i2c_master.h
@@ -34,6 +34,7 @@ void i2c_init(void);
 uint8_t i2c_start(uint8_t address);
 uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_stop(uint16_t timeout);
diff --git a/drivers/haptic/DRV2605L.c b/drivers/haptic/DRV2605L.c
new file mode 100644
index 000000000..97ca292b9
--- /dev/null
+++ b/drivers/haptic/DRV2605L.c
@@ -0,0 +1,129 @@
+/* Copyright 2018 ishtob
+ * Driver for DRV2605L written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "DRV2605L.h"
+#include "print.h"
+#include <stdlib.h>
+#include <stdio.h>
+#include <math.h>
+
+
+uint8_t DRV2605L_transfer_buffer[20];
+uint8_t DRV2605L_tx_register[0];
+uint8_t DRV2605L_read_buffer[0];
+uint8_t DRV2605L_read_register;
+
+
+void DRV_write(uint8_t drv_register, uint8_t settings) {
+  DRV2605L_transfer_buffer[0] = drv_register;
+  DRV2605L_transfer_buffer[1] = settings;
+  i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100);
+}
+
+uint8_t DRV_read(uint8_t regaddress) {
+  DRV2605L_tx_register[0] = regaddress;
+  if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1,
+    DRV2605L_tx_register, 1,
+    DRV2605L_read_buffer, 1
+)){
+    printf("err reading reg \n");
+  }
+  DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+return DRV2605L_read_register;
+}
+
+void DRV_init(void)
+{
+  i2c_init();
+  i2c_start(DRV2605L_BASE_ADDRESS);
+
+  /* 0x07 sets DRV2605 into calibration mode */
+  DRV_write(DRV_MODE,0x07); 
+
+//  DRV_write(DRV_FEEDBACK_CTRL,0xB6);
+    
+  #if FB_ERM_LRA == 0
+    /* ERM settings */
+  DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE/21.33)*1000);
+  #if ERM_OPEN_LOOP == 0
+  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK*(DRIVE_TIME+BLANKING_TIME+IDISS_TIME))/0.02133)/(DRIVE_TIME-0.0003))); 
+  #elif ERM_OPEN_LOOP == 1
+  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
+  #endif
+  #elif FB_ERM_LRA == 1
+  DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150+(SAMPLE_TIME*50))*0.000001)) + 0.0003)* F_LRA)/0.02071)));
+  #if LRA_OPEN_LOOP == 0
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK/sqrt(1-(F_LRA*0.0008))/0.02133)));
+  #elif LRA_OPEN_LOOP == 1
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
+  #endif
+  #endif
+      
+  DRVREG_FBR FB_SET;
+    FB_SET.Bits.ERM_LRA = FB_ERM_LRA;
+    FB_SET.Bits.BRAKE_FACTOR = FB_BRAKEFACTOR;
+    FB_SET.Bits.LOOP_GAIN =FB_LOOPGAIN;
+    FB_SET.Bits.BEMF_GAIN = 0; /* auto-calibration populates this field*/
+    DRV_write(DRV_FEEDBACK_CTRL, (uint8_t) FB_SET.Byte);
+  DRVREG_CTRL1 C1_SET;
+    C1_SET.Bits.C1_DRIVE_TIME = DRIVE_TIME;
+    C1_SET.Bits.C1_AC_COUPLE = AC_COUPLE;
+    C1_SET.Bits.C1_STARTUP_BOOST = STARTUP_BOOST;
+    DRV_write(DRV_CTRL_1, (uint8_t) C1_SET.Byte);
+  DRVREG_CTRL2 C2_SET;
+    C2_SET.Bits.C2_BIDIR_INPUT = BIDIR_INPUT;
+    C2_SET.Bits.C2_BRAKE_STAB = BRAKE_STAB;
+    C2_SET.Bits.C2_SAMPLE_TIME = SAMPLE_TIME;
+    C2_SET.Bits.C2_BLANKING_TIME = BLANKING_TIME;
+    C2_SET.Bits.C2_IDISS_TIME = IDISS_TIME;
+    DRV_write(DRV_CTRL_2, (uint8_t) C2_SET.Byte);
+  DRVREG_CTRL3 C3_SET;
+    C3_SET.Bits.C3_LRA_OPEN_LOOP = LRA_OPEN_LOOP;
+    C3_SET.Bits.C3_N_PWM_ANALOG = N_PWM_ANALOG;
+    C3_SET.Bits.C3_LRA_DRIVE_MODE = LRA_DRIVE_MODE;
+    C3_SET.Bits.C3_DATA_FORMAT_RTO = DATA_FORMAT_RTO;
+    C3_SET.Bits.C3_SUPPLY_COMP_DIS = SUPPLY_COMP_DIS;
+    C3_SET.Bits.C3_ERM_OPEN_LOOP = ERM_OPEN_LOOP;
+    C3_SET.Bits.C3_NG_THRESH = NG_THRESH;
+    DRV_write(DRV_CTRL_3, (uint8_t) C3_SET.Byte);
+  DRVREG_CTRL4 C4_SET;
+    C4_SET.Bits.C4_ZC_DET_TIME = ZC_DET_TIME;
+    C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME;
+    DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte);
+  DRV_write(DRV_LIB_SELECTION,LIB_SELECTION);
+  //start autocalibration
+  DRV_write(DRV_GO, 0x01);
+
+  /* 0x00 sets DRV2605 out of standby and to use internal trigger
+   * 0x01 sets DRV2605 out of standby and to use external trigger */
+  DRV_write(DRV_MODE,0x00); 
+  
+  /* 0x06: LRA library */
+  DRV_write(DRV_WAVEFORM_SEQ_1, 0x01);
+
+  /* 0xB9: LRA, 4x brake factor, medium gain, 7.5x back EMF
+   * 0x39: ERM, 4x brake factor, medium gain, 1.365x back EMF */
+  
+  /* TODO: setup auto-calibration as part of initiation */
+
+}
+
+void DRV_pulse(uint8_t sequence)
+{
+  DRV_write(DRV_GO, 0x00);
+  DRV_write(DRV_WAVEFORM_SEQ_1, sequence);
+  DRV_write(DRV_GO, 0x01);
+}
\ No newline at end of file
diff --git a/drivers/haptic/DRV2605L.h b/drivers/haptic/DRV2605L.h
new file mode 100644
index 000000000..de9d294e9
--- /dev/null
+++ b/drivers/haptic/DRV2605L.h
@@ -0,0 +1,394 @@
+/* Copyright 2018 ishtob
+ * Driver for DRV2605L written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "i2c_master.h"
+
+/* Initialization settings
+
+ * Feedback Control Settings */
+#ifndef FB_ERM_LRA
+#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
+#endif
+#ifndef FB_BRAKEFACTOR
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#endif
+#ifndef FB_LOOPGAIN
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+#endif
+
+#ifndef RATED_VOLTAGE
+#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#ifndef V_PEAK
+#define V_PEAK 2.8
+#endif
+#endif
+
+/* LRA specific settings */
+#if FB_ERM_LRA == 1
+#ifndef V_RMS
+#define V_RMS 2.0
+#endif
+#ifndef V_PEAK
+#define V_PEAK 2.1
+#endif
+#ifndef F_LRA
+#define F_LRA 205
+#endif
+#endif
+
+/* Library Selection */
+#ifndef LIB_SELECTION
+#if FB_ERM_LRA == 1
+#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+#else
+#define LIB_SELECTION 1
+#endif
+#endif
+
+/* Control 1 register settings */
+#ifndef DRIVE_TIME
+#define DRIVE_TIME 25
+#endif
+#ifndef AC_COUPLE
+#define AC_COUPLE 0
+#endif
+#ifndef STARTUP_BOOST
+#define STARTUP_BOOST 1
+#endif
+
+/* Control 2 Settings */
+#ifndef BIDIR_INPUT
+#define BIDIR_INPUT 1
+#endif
+#ifndef BRAKE_STAB
+#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
+#endif
+#ifndef SAMPLE_TIME 
+#define SAMPLE_TIME 3
+#endif
+#ifndef BLANKING_TIME
+#define BLANKING_TIME 1
+#endif
+#ifndef IDISS_TIME
+#define IDISS_TIME 1
+#endif
+
+/* Control 3 settings */
+#ifndef NG_THRESH
+#define NG_THRESH 2
+#endif
+#ifndef ERM_OPEN_LOOP
+#define ERM_OPEN_LOOP 1
+#endif
+#ifndef SUPPLY_COMP_DIS
+#define SUPPLY_COMP_DIS 0
+#endif
+#ifndef DATA_FORMAT_RTO
+#define DATA_FORMAT_RTO 0
+#endif
+#ifndef LRA_DRIVE_MODE
+#define LRA_DRIVE_MODE 0
+#endif
+#ifndef N_PWM_ANALOG
+#define N_PWM_ANALOG 0
+#endif
+#ifndef LRA_OPEN_LOOP
+#define LRA_OPEN_LOOP 0
+#endif
+
+/* Control 4 settings */
+#ifndef ZC_DET_TIME
+#define ZC_DET_TIME 0
+#endif
+#ifndef AUTO_CAL_TIME
+#define AUTO_CAL_TIME 3
+#endif
+
+/* register defines -------------------------------------------------------- */
+#define DRV2605L_BASE_ADDRESS       0x5A		/* DRV2605L Base address */
+#define DRV_STATUS                  0x00
+#define DRV_MODE                    0x01
+#define DRV_RTP_INPUT               0x02
+#define DRV_LIB_SELECTION           0x03
+#define DRV_WAVEFORM_SEQ_1          0x04
+#define DRV_WAVEFORM_SEQ_2          0x05
+#define DRV_WAVEFORM_SEQ_3          0x06
+#define DRV_WAVEFORM_SEQ_4          0x07
+#define DRV_WAVEFORM_SEQ_5          0x08
+#define DRV_WAVEFORM_SEQ_6          0x09
+#define DRV_WAVEFORM_SEQ_7          0x0A
+#define DRV_WAVEFORM_SEQ_8          0x0B
+#define DRV_GO                      0x0C
+#define DRV_OVERDRIVE_TIME_OFFSET   0x0D
+#define DRV_SUSTAIN_TIME_OFFSET_P   0x0E
+#define DRV_SUSTAIN_TIME_OFFSET_N   0x0F
+#define DRV_BRAKE_TIME_OFFSET       0x10
+#define DRV_AUDIO_2_VIBE_CTRL       0x11
+#define DRV_AUDIO_2_VIBE_MIN_IN     0x12
+#define DRV_AUDIO_2_VIBE_MAX_IN     0x13
+#define DRV_AUDIO_2_VIBE_MIN_OUTDRV	0x14
+#define DRV_AUDIO_2_VIBE_MAX_OUTDRV	0x15
+#define DRV_RATED_VOLT              0x16
+#define DRV_OVERDRIVE_CLAMP_VOLT    0x17
+#define DRV_AUTO_CALIB_COMP_RESULT  0x18 
+#define DRV_AUTO_CALIB_BEMF_RESULT  0x19
+#define DRV_FEEDBACK_CTRL           0x1A
+#define DRV_CTRL_1                  0x1B
+#define DRV_CTRL_2                  0x1C
+#define DRV_CTRL_3                  0x1D
+#define DRV_CTRL_4                  0x1E
+#define DRV_CTRL_5                  0x1F
+#define DRV_OPEN_LOOP_PERIOD        0x20
+#define DRV_VBAT_VOLT_MONITOR       0x21
+#define DRV_LRA_RESONANCE_PERIOD    0x22
+
+void DRV_init(void);
+void DRV_write(const uint8_t drv_register, const uint8_t settings);
+uint8_t DRV_read(const uint8_t regaddress);
+void DRV_pulse(const uint8_t sequence);
+
+
+typedef enum DRV_EFFECT{
+  clear_sequence      = 0,
+  strong_click 		    = 1,
+  strong_click_60 		= 2,
+  strong_click_30 		= 3,
+  sharp_click 		    = 4,
+  sharp_click_60      = 5,
+  sharp_click_30      = 6,
+  soft_bump           = 7,
+  soft_bump_60        = 8,
+  soft_bump_30        = 9,
+  dbl_click           = 10,
+  dbl_click_60        = 11,
+  trp_click           = 12,
+  soft_fuzz           = 13,
+  strong_buzz         = 14,
+  alert_750ms         = 15,
+  alert_1000ms        = 16,
+  strong_click1       = 17,
+  strong_click2_80    = 18,
+  strong_click3_60    = 19,
+  strong_click4_30    = 20,
+  medium_click1       = 21,
+  medium_click2_80    = 22,
+  medium_click3_60    = 23,
+  sharp_tick1         = 24,
+  sharp_tick2_80      = 25,
+  sharp_tick3_60      = 26,
+  sh_dblclick_str     = 27,
+  sh_dblclick_str_80  = 28,
+  sh_dblclick_str_60  = 29,
+  sh_dblclick_str_30  = 30,
+  sh_dblclick_med     = 31,
+  sh_dblclick_med_80  = 32,
+  sh_dblclick_med_60  = 33,
+  sh_dblsharp_tick    = 34,
+  sh_dblsharp_tick_80 = 35,
+  sh_dblsharp_tick_60 = 36,
+  lg_dblclick_str     = 37,
+  lg_dblclick_str_80  = 38,
+  lg_dblclick_str_60  = 39,
+  lg_dblclick_str_30  = 40,
+  lg_dblclick_med     = 41,
+  lg_dblclick_med_80  = 42,
+  lg_dblclick_med_60  = 43,
+  lg_dblsharp_tick    = 44,
+  lg_dblsharp_tick_80 = 45,
+  lg_dblsharp_tick_60 = 46,
+  buzz 					= 47,
+  buzz_80				= 48,
+  buzz_60				= 49,
+  buzz_40				= 50,
+  buzz_20				= 51,
+  pulsing_strong      = 52,
+  pulsing_strong_80   = 53,
+  pulsing_medium      = 54,
+  pulsing_medium_80   = 55,
+  pulsing_sharp       = 56,
+  pulsing_sharp_80    = 57,
+  transition_click		= 58,
+  transition_click_80 = 59,
+  transition_click_60	= 60,
+  transition_click_40	= 61,
+  transition_click_20	= 62,
+  transition_click_10	= 63,
+  transition_hum      = 64,
+  transition_hum_80   = 65,
+  transition_hum_60   = 66,
+  transition_hum_40   = 67,
+  transition_hum_20   = 68,
+  transition_hum_10   = 69,
+  transition_rampdown_long_smooth1  = 70,
+  transition_rampdown_long_smooth2  = 71,
+  transition_rampdown_med_smooth1   = 72,
+  transition_rampdown_med_smooth2   = 73,
+  transition_rampdown_short_smooth1 = 74,
+  transition_rampdown_short_smooth2 = 75,
+  transition_rampdown_long_sharp1   = 76,
+  transition_rampdown_long_sharp2   = 77,
+  transition_rampdown_med_sharp1    = 78,
+  transition_rampdown_med_sharp2    = 79,
+  transition_rampdown_short_sharp1  = 80,
+  transition_rampdown_short_sharp2  = 81,
+  transition_rampup_long_smooth1    = 82,
+  transition_rampup_long_smooth2    = 83,
+  transition_rampup_med_smooth1     = 84,
+  transition_rampup_med_smooth2     = 85,
+  transition_rampup_short_smooth1   = 86,
+  transition_rampup_short_smooth2   = 87,
+  transition_rampup_long_sharp1     = 88,
+  transition_rampup_long_sharp2     = 89,
+  transition_rampup_med_sharp1      = 90,
+  transition_rampup_med_sharp2      = 91,
+  transition_rampup_short_sharp1    = 92,
+  transition_rampup_short_sharp2    = 93,
+  transition_rampdown_long_smooth1_50  = 94,
+  transition_rampdown_long_smooth2_50  = 95,
+  transition_rampdown_med_smooth1_50   = 96,
+  transition_rampdown_med_smooth2_50   = 97,
+  transition_rampdown_short_smooth1_50 = 98,
+  transition_rampdown_short_smooth2_50 = 99,
+  transition_rampdown_long_sharp1_50   = 100,
+  transition_rampdown_long_sharp2_50   = 101,
+  transition_rampdown_med_sharp1_50    = 102,
+  transition_rampdown_med_sharp2_50    = 103,
+  transition_rampdown_short_sharp1_50  = 104,
+  transition_rampdown_short_sharp2_50  = 105,
+  transition_rampup_long_smooth1_50    = 106,
+  transition_rampup_long_smooth2_50    = 107,
+  transition_rampup_med_smooth1_50     = 108,
+  transition_rampup_med_smooth2_50     = 109,
+  transition_rampup_short_smooth1_50   = 110,
+  transition_rampup_short_smooth2_50   = 111,
+  transition_rampup_long_sharp1_50     = 112,
+  transition_rampup_long_sharp2_50     = 113,
+  transition_rampup_med_sharp1_50      = 114,
+  transition_rampup_med_sharp2_50      = 115,
+  transition_rampup_short_sharp1_50    = 116,
+  transition_rampup_short_sharp2_50    = 117,
+  long_buzz_for_programmatic_stopping  = 118,
+  smooth_hum1_50 = 119,
+  smooth_hum2_40 = 120,
+  smooth_hum3_30 = 121,
+  smooth_hum4_20 = 122,
+  smooth_hum5_10 = 123,
+} DRV_EFFECT;
+
+/* Register bit array unions */
+
+typedef union DRVREG_STATUS { /* register 0x00 */
+  uint8_t Byte;
+  struct {
+    uint8_t OC_DETECT   :1; /* set to 1 when overcurrent event is detected */
+    uint8_t OVER_TEMP   :1; /* set to 1 when device exceeds temp threshold */
+    uint8_t FB_STS      :1; /* set to 1 when feedback controller has timed out */
+    /* auto-calibration routine and diagnostic result
+     * result  |  auto-calibation  |      diagnostic       |
+     *   0     |      passed       | actuator func normal  |
+     *   1     |      failed       | actuator func fault*  |
+     * * actuator is not present or is shorted, timing out, or giving out–of-range back-EMF */
+    uint8_t DIAG_RESULT :1;
+    uint8_t             :1;
+    uint8_t DEVICE_ID   :3; /* Device IDs 3: DRV2605  4: DRV2604  5: DRV2604L  6: DRV2605L */
+  } Bits;
+} DRVREG_STATUS;
+
+typedef union DRVREG_MODE { /* register 0x01 */
+  uint8_t Byte;
+  struct {
+    uint8_t MODE        :3; /* Mode setting */
+    uint8_t             :3;
+    uint8_t STANDBY     :1; /* 0:standby 1:ready */
+  } Bits;
+} DRVREG_MODE;
+
+typedef union DRVREG_WAIT {
+  uint8_t Byte;
+  struct {
+    uint8_t WAIT_MODE   :1; /* Set to 1 to interpret as wait for next 7 bits x10ms */
+    uint8_t WAIT_TIME   :7;
+  } Bits;
+} DRVREG_WAIT;
+
+typedef union DRVREG_FBR{ /* register 0x1A */
+  uint8_t Byte;
+  struct {
+    uint8_t BEMF_GAIN    :2;
+    uint8_t LOOP_GAIN    :2;
+    uint8_t BRAKE_FACTOR :3;
+    uint8_t ERM_LRA      :1;
+  } Bits;
+} DRVREG_FBR;
+
+typedef union DRVREG_CTRL1{ /* register 0x1B */
+  uint8_t Byte;
+  struct {
+    uint8_t C1_DRIVE_TIME    :5;
+    uint8_t C1_AC_COUPLE     :1;
+    uint8_t                  :1;
+    uint8_t C1_STARTUP_BOOST :1;
+  } Bits;
+} DRVREG_CTRL1;
+
+typedef union DRVREG_CTRL2{ /* register 0x1C */
+  uint8_t Byte;
+  struct {
+    uint8_t C2_IDISS_TIME    :2;
+    uint8_t C2_BLANKING_TIME :2;
+    uint8_t C2_SAMPLE_TIME   :2;
+    uint8_t C2_BRAKE_STAB    :1;
+    uint8_t C2_BIDIR_INPUT   :1;
+  } Bits;
+} DRVREG_CTRL2;
+
+typedef union DRVREG_CTRL3{ /* register 0x1D */
+  uint8_t Byte;
+  struct {
+    uint8_t C3_LRA_OPEN_LOOP   :1;
+    uint8_t C3_N_PWM_ANALOG    :1;
+    uint8_t C3_LRA_DRIVE_MODE  :1;
+    uint8_t C3_DATA_FORMAT_RTO :1;
+    uint8_t C3_SUPPLY_COMP_DIS :1;
+    uint8_t C3_ERM_OPEN_LOOP   :1;
+    uint8_t C3_NG_THRESH       :2;
+  } Bits;
+} DRVREG_CTRL3;
+
+typedef union DRVREG_CTRL4{ /* register 0x1E */
+  uint8_t Byte;
+  struct {
+    uint8_t C4_OTP_PROGRAM     :1;
+    uint8_t                    :1;
+    uint8_t C4_OTP_STATUS      :1;
+    uint8_t                    :1;
+    uint8_t C4_AUTO_CAL_TIME   :2;
+    uint8_t C4_ZC_DET_TIME     :2;
+  } Bits;
+} DRVREG_CTRL4;
+
+typedef union DRVREG_CTRL5{ /* register 0x1F */
+  uint8_t Byte;
+  struct {
+    uint8_t C5_IDISS_TIME         :2;
+    uint8_t C5_BLANKING_TIME      :2;
+    uint8_t C5_PLAYBACK_INTERVAL  :1;
+    uint8_t C5_LRA_AUTO_OPEN_LOOP :1;
+    uint8_t C5_AUTO_OL_CNT        :2;
+  } Bits;
+} DRVREG_CTRL5;
\ No newline at end of file
diff --git a/drivers/qwiic/micro_oled.c b/drivers/qwiic/micro_oled.c
new file mode 100644
index 000000000..35c5d6ee1
--- /dev/null
+++ b/drivers/qwiic/micro_oled.c
@@ -0,0 +1,691 @@
+/* Jim Lindblom @ SparkFun Electronics
+ * October 26, 2014
+ * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED
+ *
+ * Modified by:
+ * Emil Varughese @ Edwin Robotics Pvt. Ltd.
+ * July 27, 2015
+ * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+ *
+ * This code was heavily based around the MicroView library, written by GeekAmmo
+ * (https://github.com/geekammo/MicroView-Arduino-Library).
+ *
+ * Adapted for QMK by:
+ * Jack Humbert <jack.humb@gmail.com>
+ * October 11, 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "micro_oled.h"
+#include <stdlib.h>
+#include "util/font5x7.h"
+#include "util/font8x16.h"
+#include "string.h"
+
+#define TOTALFONTS 2
+const unsigned char * fonts_pointer[]= { font5x7, font8x16 };
+
+uint8_t foreColor,drawMode,fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY;
+uint16_t fontMapWidth;
+
+#define _BV(x) (1 << (x))
+#define swap(a, b) { uint8_t t = a; a = b; b = t; }
+
+uint8_t micro_oled_transfer_buffer[20];
+static uint8_t micro_oled_screen_current[LCDWIDTH*LCDWIDTH/8] = { 0 };
+
+/* LCD Memory organised in 64 horizontal pixel and 6 rows of byte
+   B  B .............B  -----
+   y  y .............y        \
+   t  t .............t         \
+   e  e .............e          \
+   0  1 .............63          \
+                                  \
+   D0 D0.............D0            \
+   D1 D1.............D1            / ROW 0
+   D2 D2.............D2           /
+   D3 D3.............D3          /
+   D4 D4.............D4         /
+   D5 D5.............D5        /
+   D6 D6.............D6       /
+   D7 D7.............D7  ----
+  */
+
+#if LCDWIDTH == 64
+  #if LCDWIDTH == 48
+static uint8_t micro_oled_screen_buffer[] = {
+// QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php
+//64x48 image
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
+0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
+0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60,
+0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE,
+0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF,
+0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7,
+0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06,
+0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
+0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00
+};
+  #endif
+#elif LCDWIDTH == 128
+  #if LCDHEIGHT == 32
+     static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {
+//128x32 qmk image
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xFC, 0xFC,
+0xE0, 0xF0, 0xFC, 0xE0, 0xE0, 0xFC, 0xE0, 0xE0, 0xFC, 0xFC,
+0xE0, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xF0, 0x10, 0x10, 0x30, 0xE0, 0x00, 0x00,
+0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00,
+0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x80,
+0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00,
+0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
+0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xB2, 0xB2, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0x03,
+0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF,
+0xFF, 0xB7, 0xB2, 0xB2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x1F, 0x02, 0x02, 0x03, 0x01, 0x00, 0x06, 0x1F, 0x10,
+0x10, 0x10, 0x1F, 0x06, 0x00, 0x03, 0x1E, 0x18, 0x0F, 0x01,
+0x0F, 0x18, 0x1E, 0x01, 0x00, 0x0F, 0x1F, 0x12, 0x02, 0x12,
+0x13, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x0E, 0x1F, 0x12,
+0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x1F,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x48, 0x4D, 0x4D, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFE, 0xF8, 0xF9, 0xF3, 0xF3, 0xC0, 0x80, 0xF3,
+0xF3, 0xF3, 0xF9, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xED,
+0x4D, 0x4D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0xC0, 0x00, 0x70, 0xC0,
+0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0C,
+0x04, 0x04, 0x04, 0x04, 0x1C, 0xF0, 0x00, 0x00, 0xFC, 0x0C,
+0x38, 0xE0, 0x00, 0x00, 0xC0, 0x38, 0x0C, 0xFC, 0x00, 0x00,
+0xFC, 0xFC, 0x60, 0x90, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x3F,
+0x3F, 0x07, 0x3F, 0x3F, 0x07, 0x0F, 0x3F, 0x07, 0x07, 0x3F,
+0x07, 0x07, 0x3F, 0x3F, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
+0x06, 0x04, 0x04, 0x07, 0x01, 0x00, 0x00, 0x13, 0x1E, 0x03,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x04, 0x04,
+0x04, 0x04, 0x07, 0x0D, 0x08, 0x00, 0x07, 0x00, 0x00, 0x01,
+0x07, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x07,
+0x00, 0x01, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00
+    };
+  #elif LCDHEIGHT == 64
+    static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0,
+0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00,
+0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xC0, 0xC0, 0xC0, 0xC0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFF,
+0x7F, 0x7E, 0xFE, 0xFF, 0xFF, 0xFE, 0xFE, 0x7F, 0x7F, 0xFE,
+0xFE, 0xFF, 0xFF, 0xFE, 0x7E, 0x7F, 0xFF, 0xFE, 0xFE, 0xFC,
+0xFC, 0xF8, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x88, 0x88, 0x88, 0xDD, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xDD, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFE, 0xF8, 0xF0, 0xF3, 0xF3, 0xE7, 0xE7, 0x00,
+0x00, 0xE7, 0xE7, 0xF3, 0xF3, 0xF0, 0xF8, 0xFE, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x99, 0x99, 0x99, 0x99, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0F, 0x1F, 0x3F,
+0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F,
+0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF,
+0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x01, 0x01, 0x01, 0x01, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x03, 0x01, 0x00,
+0x80, 0x03, 0x03, 0x00, 0x00, 0x01, 0x03, 0x00, 0x80, 0x01,
+0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xFF, 0x11, 0x11, 0x11, 0x0E, 0x00, 0x70,
+0x88, 0x04, 0x04, 0x04, 0xF8, 0x00, 0x00, 0x3C, 0xE0, 0xC0,
+0x38, 0x1C, 0xE0, 0x80, 0x70, 0x0C, 0x00, 0xF8, 0xAC, 0x24,
+0x24, 0x3C, 0x30, 0x00, 0x00, 0xFC, 0x0C, 0x04, 0x00, 0xF8,
+0xAC, 0x24, 0x24, 0x2C, 0x30, 0x00, 0x70, 0xDC, 0x04, 0x04,
+0x88, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+0x8C, 0x04, 0x04, 0xF8, 0x00, 0x04, 0x3C, 0xE0, 0x80, 0xF0,
+0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x83, 0x01, 0x01,
+0x01, 0x81, 0xFE, 0x3C, 0x00, 0x00, 0xFF, 0x03, 0x0E, 0x70,
+0xC0, 0xE0, 0x38, 0x06, 0x03, 0xFF, 0x00, 0x00, 0xFF, 0x18,
+0x38, 0x66, 0xC3, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
+0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x01,
+0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x04, 0x03,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x01, 0x01, 0x01, 0x01, 0x03, 0x02, 0x00, 0x01, 0x00, 0x00,
+0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+//TODO: generate bitmap of QMK logo here
+  #endif
+#else
+//catchall for custom screen szies
+    static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {0};
+#endif  
+
+
+
+void micro_oled_init(void) {
+
+  i2c_init();
+  i2c_start(I2C_ADDRESS_SA0_1);
+
+  // Display Init sequence for 64x48 OLED module
+  send_command(DISPLAYOFF);      // 0xAE
+
+  send_command(SETDISPLAYCLOCKDIV);  // 0xD5
+  send_command(0x80);          // the suggested ratio 0x80
+
+  send_command(SETMULTIPLEX);      // 0xA8
+  send_command(LCDHEIGHT - 1);
+
+  send_command(SETDISPLAYOFFSET);    // 0xD3
+  send_command(0x00);         // no offset
+
+  send_command(SETSTARTLINE | 0x00);  // line #0
+
+  send_command(CHARGEPUMP);      // enable charge pump
+  send_command(0x14);
+
+  send_command(NORMALDISPLAY);     // 0xA6
+  send_command(DISPLAYALLONRESUME);  // 0xA4
+
+//display at regular orientation
+  send_command(SEGREMAP | 0x1);
+  send_command(COMSCANDEC);
+
+//rotate display 180
+#ifdef micro_oled_rotate_180
+  send_command(SEGREMAP);
+  send_command(COMSCANINC);
+#endif
+
+  send_command(MEMORYMODE);
+  send_command(0x10);
+
+  send_command(SETCOMPINS);      // 0xDA
+if (LCDHEIGHT > 32) {
+  send_command(0x12);
+} else {
+  send_command(0x02);
+}
+  send_command(SETCONTRAST);     // 0x81
+  send_command(0x8F);
+
+  send_command(SETPRECHARGE);      // 0xd9
+  send_command(0xF1);
+
+  send_command(SETVCOMDESELECT);     // 0xDB
+  send_command(0x40);
+
+  send_command(DISPLAYON);       //--turn on oled panel
+  clear_screen();           // Erase hardware memory inside the OLED controller to avoid random data in memory.
+  send_buffer();
+}
+
+void send_command(uint8_t command) {
+  micro_oled_transfer_buffer[0] = I2C_COMMAND;
+  micro_oled_transfer_buffer[1] = command;
+  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
+}
+
+void send_data(uint8_t data) {
+  micro_oled_transfer_buffer[0] = I2C_DATA;
+  micro_oled_transfer_buffer[1] = data;
+  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
+}
+
+/** \brief Set SSD1306 page address.
+    Send page address command and address to the SSD1306 OLED controller.
+*/
+void set_page_address(uint8_t address) {
+  address = (0xB0 | address);
+  send_command(address);
+}
+
+/** \brief Set SSD1306 column address.
+    Send column address command and address to the SSD1306 OLED controller.
+*/
+void set_column_address(uint8_t address) {
+  send_command( ( 0x10 | (address >> 4) ) + ((128 - LCDWIDTH) >> 8) );
+  send_command( 0x0F & address );
+}
+
+/** \brief Clear SSD1306's memory.
+    To clear GDRAM inside the LCD controller.
+*/
+void clear_screen(void) {
+  for (int i=0;i<8; i++) {
+    set_page_address(i);
+    set_column_address(0);
+    for (int j=0; j<0x80; j++) {
+      send_data(0);
+    }
+  }
+}
+
+/** \brief Clear SSD1306's memory.
+    To clear GDRAM inside the LCD controller.
+*/
+void clear_buffer(void) {
+//384
+  memset(micro_oled_screen_buffer, 0, LCDWIDTH*LCDWIDTH/8);
+}
+
+/** \brief Invert display.
+    The PIXEL_ON color of the display will turn to PIXEL_OFF and the PIXEL_OFF will turn to PIXEL_ON.
+*/
+void invert_screen(bool invert) {
+  if (invert) {
+    send_command(INVERTDISPLAY);
+  } else {
+    send_command(NORMALDISPLAY);
+  }
+}
+
+/** \brief Set contrast.
+    OLED contract value from 0 to 255. Note: Contrast level is not very obvious.
+*/
+void set_contrast(uint8_t contrast) {
+  send_command(SETCONTRAST);     // 0x81
+  send_command(contrast);
+}
+
+/** \brief Transfer display buffer.
+  Sends the updated buffer to the controller - the current status is checked before to save i2c exectution time
+*/
+void send_buffer(void) {
+  uint8_t i, j;
+
+  uint8_t page_addr = 0xFF;
+  for (i = 0; i < LCDHEIGHT/8; i++) {
+    uint8_t col_addr = 0xFF;
+    for (j = 0; j < LCDWIDTH; j++) {
+      if (micro_oled_screen_buffer[i*LCDWIDTH+j] != micro_oled_screen_current[i*LCDWIDTH+j]) {
+        if (page_addr != i) {
+          set_page_address(i);
+        }
+        if (col_addr != j) {
+          set_column_address(j);
+        }
+        send_data(micro_oled_screen_buffer[i*LCDWIDTH+j]);
+        micro_oled_screen_current[i*LCDWIDTH+j] = micro_oled_screen_buffer[i*LCDWIDTH+j];
+        col_addr = j + 1;
+      }
+    }
+  }
+}
+
+/** \brief Draw pixel with color and mode.
+  Draw color pixel in the screen buffer's x,y position with NORM or XOR draw mode.
+*/
+void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode) {
+  if ((x<0) ||  (x>=LCDWIDTH) || (y<0) || (y>=LCDHEIGHT))
+    return;
+
+  if (mode == XOR) {
+    if (color == PIXEL_ON)
+      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] ^= _BV((y%8));
+  } else {
+    if (color == PIXEL_ON)
+      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] |= _BV((y%8));
+    else
+      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] &= ~_BV((y%8));
+  }
+}
+
+/** \brief Draw line with color and mode.
+Draw line using color and mode from x0,y0 to x1,y1 of the screen buffer.
+*/
+void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode) {
+  uint8_t steep = abs(y1 - y0) > abs(x1 - x0);
+  if (steep) {
+    swap(x0, y0);
+    swap(x1, y1);
+  }
+
+  if (x0 > x1) {
+    swap(x0, x1);
+    swap(y0, y1);
+  }
+
+  uint8_t dx, dy;
+  dx = x1 - x0;
+  dy = abs(y1 - y0);
+
+  int8_t err = dx / 2;
+  int8_t ystep;
+
+  if (y0 < y1) {
+    ystep = 1;
+  } else {
+    ystep = -1;}
+
+  for (; x0<x1; x0++) {
+    if (steep) {
+      draw_pixel(y0, x0, color, mode);
+    } else {
+      draw_pixel(x0, y0, color, mode);
+    }
+    err -= dy;
+    if (err < 0) {
+      y0 += ystep;
+      err += dx;
+    }
+  }
+}
+
+/** \brief Draw horizontal line with color and mode.
+Draw horizontal line using color and mode from x,y to x+width,y of the screen buffer.
+*/
+void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) {
+  draw_line(x,y,x+width,y,color,mode);
+}
+
+/** \brief Draw vertical line.
+Draw vertical line using current fore color and current draw mode from x,y to x,y+height of the screen buffer.
+*/
+void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) {
+  draw_line(x,y,x,y+height,color,mode);
+}
+
+/** \brief Draw rectangle with color and mode.
+Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  uint8_t tempHeight;
+
+  draw_line_hori(x,y, width, color, mode);
+  draw_line_hori(x,y+height-1, width, color, mode);
+
+  tempHeight=height-2;
+
+  // skip drawing vertical lines to avoid overlapping of pixel that will
+  // affect XOR plot if no pixel in between horizontal lines
+  if (tempHeight<1) return;
+
+  draw_line_vert(x,y+1, tempHeight, color, mode);
+  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
+}
+
+/** \brief Draw rectangle with color and mode.
+Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  uint8_t tempHeight;
+
+  draw_line_hori(x+1,y, width-2, color, mode);
+  draw_line_hori(x+1,y+height-1, width-2, color, mode);
+
+  tempHeight=height-2;
+
+  // skip drawing vertical lines to avoid overlapping of pixel that will
+  // affect XOR plot if no pixel in between horizontal lines
+  if (tempHeight<1) return;
+
+  draw_line_vert(x,y+1, tempHeight, color, mode);
+  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
+}
+
+/** \brief Draw filled rectangle with color and mode.
+Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
+  for (int i=x; i<x+width;i++) {
+    draw_line_vert(i,y, height, color, mode);
+  }
+}
+
+/** \brief Draw filled rectangle with color and mode.
+Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
+*/
+void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
+  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
+  for (int i=x; i<x+width;i++) {
+    if (i == x || i == (x + width - 1))
+      draw_line_vert(i, y+1, height-2, color, mode);
+    else
+      draw_line_vert(i, y, height, color, mode);
+  }
+}
+
+/** \brief Draw character with color and mode.
+  Draw character c using color and draw mode at x,y.
+*/
+void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font) {
+  // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels
+
+  uint8_t rowsToDraw,row, tempC;
+  uint8_t i,j,temp;
+  uint16_t charPerBitmapRow,charColPositionOnBitmap,charRowPositionOnBitmap,charBitmapStartPosition;
+
+  if ((font>=TOTALFONTS) || (font<0))
+    return;
+
+  uint8_t fontType = font;
+  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
+  uint8_t fontHeight = pgm_read_byte(fonts_pointer[fontType]+1);
+  uint8_t fontStartChar = pgm_read_byte(fonts_pointer[fontType]+2);
+  uint8_t fontTotalChar = pgm_read_byte(fonts_pointer[fontType]+3);
+  uint16_t fontMapWidth = (pgm_read_byte(fonts_pointer[fontType]+4)*100)+pgm_read_byte(fonts_pointer[fontType]+5); // two bytes values into integer 16
+
+  if ((c<fontStartChar) || (c>(fontStartChar+fontTotalChar-1)))   // no bitmap for the required c
+    return;
+
+  tempC=c-fontStartChar;
+
+  // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn
+  rowsToDraw=fontHeight/8;  // 8 is LCD's page size, see SSD1306 datasheet
+  if (rowsToDraw<=1) rowsToDraw=1;
+
+  // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw
+  if (rowsToDraw==1) {
+    for  (i=0;i<fontWidth+1;i++) {
+      if (i==fontWidth) // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5
+      temp=0;
+      else
+      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(tempC*fontWidth)+i);
+
+      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
+        if (temp & 0x1) {
+          draw_pixel(x+i, y+j, color,mode);
+        }
+        else {
+          draw_pixel(x+i, y+j, !color,mode);
+        }
+
+        temp >>=1;
+      }
+    }
+    return;
+  }
+
+  // font height over 8 bit
+  // take character "0" ASCII 48 as example
+  charPerBitmapRow = fontMapWidth/fontWidth;  // 256/8 =32 char per row
+  charColPositionOnBitmap = tempC % charPerBitmapRow;  // =16
+  charRowPositionOnBitmap = (int)(tempC/charPerBitmapRow); // =1
+  charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight/8)) + (charColPositionOnBitmap * fontWidth) ;
+
+  // each row on LCD is 8 bit height (see datasheet for explanation)
+  for(row=0;row<rowsToDraw;row++) {
+    for (i=0; i<fontWidth;i++) {
+      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(charBitmapStartPosition+i+(row*fontMapWidth)));
+      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
+        if (temp & 0x1) {
+          draw_pixel(x+i,y+j+(row*8), color, mode);
+        }
+        else {
+          draw_pixel(x+i,y+j+(row*8), !color, mode);
+        }
+        temp >>=1;
+      }
+    }
+  }
+
+}
+
+void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font) {
+
+  if ((font>=TOTALFONTS) || (font<0))
+    return;
+
+  uint8_t fontType = font;
+  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
+
+  uint8_t cur_x = x;
+  for (int i = 0; i < strlen(string); i++) {
+    draw_char(cur_x, y, string[i], color, mode, font);
+    cur_x += fontWidth + 1;
+  }
+
+}
diff --git a/drivers/qwiic/micro_oled.h b/drivers/qwiic/micro_oled.h
new file mode 100644
index 000000000..5d6a1029e
--- /dev/null
+++ b/drivers/qwiic/micro_oled.h
@@ -0,0 +1,134 @@
+/* Jim Lindblom @ SparkFun Electronics
+ * October 26, 2014
+ * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED
+ *
+ * Modified by:
+ * Emil Varughese @ Edwin Robotics Pvt. Ltd.
+ * July 27, 2015
+ * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+ *
+ * This code was heavily based around the MicroView library, written by GeekAmmo
+ * (https://github.com/geekammo/MicroView-Arduino-Library).
+ *
+ * Adapted for QMK by:
+ * Jack Humbert <jack.humb@gmail.com>
+ * October 11, 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "qwiic.h"
+
+void micro_oled_init(void);
+
+void send_command(uint8_t command);
+void send_data(uint8_t data);
+void set_page_address(uint8_t address);
+void set_column_address(uint8_t address);
+void clear_screen(void);
+void clear_buffer(void);
+void send_buffer(void);
+void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode);
+void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode);
+void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode);
+void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode);
+void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
+void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font);
+void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font);
+
+#define I2C_ADDRESS_SA0_0 0b0111100
+#ifndef I2C_ADDRESS_SA0_1
+#define I2C_ADDRESS_SA0_1 0b0111101
+#endif
+#define I2C_COMMAND 0x00
+#define I2C_DATA 0x40
+#define PIXEL_OFF 0
+#define PIXEL_ON  1
+
+#ifndef LCDWIDTH
+#define LCDWIDTH      64
+#endif
+#ifndef LCDWIDTH
+#define LCDHEIGHT     48
+#endif
+#define FONTHEADERSIZE    6
+
+#define NORM        0
+#define XOR         1
+
+#define PAGE        0
+#define ALL         1
+
+#define WIDGETSTYLE0      0
+#define WIDGETSTYLE1      1
+#define WIDGETSTYLE2      2
+
+#define SETCONTRAST     0x81
+#define DISPLAYALLONRESUME  0xA4
+#define DISPLAYALLON    0xA5
+#define NORMALDISPLAY     0xA6
+#define INVERTDISPLAY     0xA7
+#define DISPLAYOFF      0xAE
+#define DISPLAYON       0xAF
+#define SETDISPLAYOFFSET  0xD3
+#define SETCOMPINS      0xDA
+#define SETVCOMDESELECT   0xDB
+#define SETDISPLAYCLOCKDIV  0xD5
+#define SETPRECHARGE    0xD9
+#define SETMULTIPLEX    0xA8
+#define SETLOWCOLUMN    0x00
+#define SETHIGHCOLUMN     0x10
+#define SETSTARTLINE    0x40
+#define MEMORYMODE      0x20
+#define COMSCANINC      0xC0
+#define COMSCANDEC      0xC8
+#define SEGREMAP      0xA0
+#define CHARGEPUMP      0x8D
+#define EXTERNALVCC     0x01
+#define SWITCHCAPVCC    0x02
+
+// Scroll
+#define ACTIVATESCROLL          0x2F
+#define DEACTIVATESCROLL        0x2E
+#define SETVERTICALSCROLLAREA       0xA3
+#define RIGHTHORIZONTALSCROLL       0x26
+#define LEFT_HORIZONTALSCROLL       0x27
+#define VERTICALRIGHTHORIZONTALSCROLL 0x29
+#define VERTICALLEFTHORIZONTALSCROLL  0x2A
+
+typedef enum CMD {
+  CMD_CLEAR,      //0
+  CMD_INVERT,     //1
+  CMD_CONTRAST,   //2
+  CMD_DISPLAY,    //3
+  CMD_SETCURSOR,    //4
+  CMD_PIXEL,      //5
+  CMD_LINE,     //6
+  CMD_LINEH,      //7
+  CMD_LINEV,      //8
+  CMD_RECT,     //9
+  CMD_RECTFILL,   //10
+  CMD_CIRCLE,     //11
+  CMD_CIRCLEFILL,   //12
+  CMD_DRAWCHAR,   //13
+  CMD_DRAWBITMAP,   //14
+  CMD_GETLCDWIDTH,  //15
+  CMD_GETLCDHEIGHT, //16
+  CMD_SETCOLOR,   //17
+  CMD_SETDRAWMODE   //18
+} commCommand_t;
\ No newline at end of file
diff --git a/drivers/qwiic/qwiic.c b/drivers/qwiic/qwiic.c
new file mode 100644
index 000000000..904791992
--- /dev/null
+++ b/drivers/qwiic/qwiic.c
@@ -0,0 +1,31 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qwiic.h"
+
+void qwiic_init(void) {
+  #ifdef QWIIC_JOYSTIIC_ENABLE
+    joystiic_init();
+  #endif
+  #ifdef QWIIC_MICRO_OLED_ENABLE
+    micro_oled_init();
+  #endif
+}
+
+void qwiic_task(void) {
+  #ifdef QWIIC_JOYSTIIC_ENABLE
+    joystiic_task();
+  #endif
+}
diff --git a/drivers/qwiic/qwiic.h b/drivers/qwiic/qwiic.h
new file mode 100644
index 000000000..160fb28df
--- /dev/null
+++ b/drivers/qwiic/qwiic.h
@@ -0,0 +1,28 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "i2c_master.h"
+
+#ifdef QWIIC_JOYSTIIC_ENABLE
+  #include "joystiic.h"
+#endif
+#ifdef QWIIC_MICRO_OLED_ENABLE
+  #include "micro_oled.h"
+#endif
+
+void qwiic_init(void);
+void qwiic_task(void);
diff --git a/drivers/qwiic/qwiic.mk b/drivers/qwiic/qwiic.mk
new file mode 100644
index 000000000..4ae2d78e3
--- /dev/null
+++ b/drivers/qwiic/qwiic.mk
@@ -0,0 +1,18 @@
+ifneq ($(strip $(QWIIC_ENABLE)),)
+  COMMON_VPATH += $(DRIVER_PATH)/qwiic
+  OPT_DEFS += -DQWIIC_ENABLE
+  SRC += qwiic.c
+  ifeq ($(filter "i2c_master.c", $(SRC)),)
+    SRC += i2c_master.c
+  endif
+endif
+
+ifneq ($(filter JOYSTIIC, $(QWIIC_ENABLE)),)
+  OPT_DEFS += -DQWIIC_JOYSTIIC_ENABLE
+  SRC += joystiic.c
+endif
+
+ifneq ($(filter MICRO_OLED, $(QWIIC_ENABLE)),)
+  OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE
+  SRC += micro_oled.c
+endif
diff --git a/drivers/qwiic/util/font5x7.h b/drivers/qwiic/util/font5x7.h
new file mode 100644
index 000000000..0bad206b7
--- /dev/null
+++ b/drivers/qwiic/util/font5x7.h
@@ -0,0 +1,288 @@
+/******************************************************************************
+font5x7.h
+Definition for small font
+
+This file was imported from the MicroView library, written by GeekAmmo
+(https://github.com/geekammo/MicroView-Arduino-Library), and released under
+the terms of the GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Modified by:
+Emil Varughese @ Edwin Robotics Pvt. Ltd.
+July 27, 2015
+https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+
+******************************************************************************/
+#pragma once
+
+#include "progmem.h"
+
+// Standard ASCII 5x7 font
+static const unsigned char font5x7[] PROGMEM = {
+    // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
+    5,8,0,255,12,75,
+    0x00, 0x00, 0x00, 0x00, 0x00,
+    0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
+    0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
+    0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
+    0x18, 0x3C, 0x7E, 0x3C, 0x18,
+    0x1C, 0x57, 0x7D, 0x57, 0x1C,
+    0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
+    0x00, 0x18, 0x3C, 0x18, 0x00,
+    0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
+    0x00, 0x18, 0x24, 0x18, 0x00,
+    0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
+    0x30, 0x48, 0x3A, 0x06, 0x0E,
+    0x26, 0x29, 0x79, 0x29, 0x26,
+    0x40, 0x7F, 0x05, 0x05, 0x07,
+    0x40, 0x7F, 0x05, 0x25, 0x3F,
+    0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
+    0x7F, 0x3E, 0x1C, 0x1C, 0x08,
+    0x08, 0x1C, 0x1C, 0x3E, 0x7F,
+    0x14, 0x22, 0x7F, 0x22, 0x14,
+    0x5F, 0x5F, 0x00, 0x5F, 0x5F,
+    0x06, 0x09, 0x7F, 0x01, 0x7F,
+    0x00, 0x66, 0x89, 0x95, 0x6A,
+    0x60, 0x60, 0x60, 0x60, 0x60,
+    0x94, 0xA2, 0xFF, 0xA2, 0x94,
+    0x08, 0x04, 0x7E, 0x04, 0x08,
+    0x10, 0x20, 0x7E, 0x20, 0x10,
+    0x08, 0x08, 0x2A, 0x1C, 0x08,
+    0x08, 0x1C, 0x2A, 0x08, 0x08,
+    0x1E, 0x10, 0x10, 0x10, 0x10,
+    0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
+    0x30, 0x38, 0x3E, 0x38, 0x30,
+    0x06, 0x0E, 0x3E, 0x0E, 0x06,
+    0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x5F, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x07, 0x00,
+    0x14, 0x7F, 0x14, 0x7F, 0x14,
+    0x24, 0x2A, 0x7F, 0x2A, 0x12,
+    0x23, 0x13, 0x08, 0x64, 0x62,
+    0x36, 0x49, 0x56, 0x20, 0x50,
+    0x00, 0x08, 0x07, 0x03, 0x00,
+    0x00, 0x1C, 0x22, 0x41, 0x00,
+    0x00, 0x41, 0x22, 0x1C, 0x00,
+    0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
+    0x08, 0x08, 0x3E, 0x08, 0x08,
+    0x00, 0x80, 0x70, 0x30, 0x00,
+    0x08, 0x08, 0x08, 0x08, 0x08,
+    0x00, 0x00, 0x60, 0x60, 0x00,
+    0x20, 0x10, 0x08, 0x04, 0x02,
+    0x3E, 0x51, 0x49, 0x45, 0x3E,
+    0x00, 0x42, 0x7F, 0x40, 0x00,
+    0x72, 0x49, 0x49, 0x49, 0x46,
+    0x21, 0x41, 0x49, 0x4D, 0x33,
+    0x18, 0x14, 0x12, 0x7F, 0x10,
+    0x27, 0x45, 0x45, 0x45, 0x39,
+    0x3C, 0x4A, 0x49, 0x49, 0x31,
+    0x41, 0x21, 0x11, 0x09, 0x07,
+    0x36, 0x49, 0x49, 0x49, 0x36,
+    0x46, 0x49, 0x49, 0x29, 0x1E,
+    0x00, 0x00, 0x14, 0x00, 0x00,
+    0x00, 0x40, 0x34, 0x00, 0x00,
+    0x00, 0x08, 0x14, 0x22, 0x41,
+    0x14, 0x14, 0x14, 0x14, 0x14,
+    0x00, 0x41, 0x22, 0x14, 0x08,
+    0x02, 0x01, 0x59, 0x09, 0x06,
+    0x3E, 0x41, 0x5D, 0x59, 0x4E,
+    0x7C, 0x12, 0x11, 0x12, 0x7C,
+    0x7F, 0x49, 0x49, 0x49, 0x36,
+    0x3E, 0x41, 0x41, 0x41, 0x22,
+    0x7F, 0x41, 0x41, 0x41, 0x3E,
+    0x7F, 0x49, 0x49, 0x49, 0x41,
+    0x7F, 0x09, 0x09, 0x09, 0x01,
+    0x3E, 0x41, 0x41, 0x51, 0x73,
+    0x7F, 0x08, 0x08, 0x08, 0x7F,
+    0x00, 0x41, 0x7F, 0x41, 0x00,
+    0x20, 0x40, 0x41, 0x3F, 0x01,
+    0x7F, 0x08, 0x14, 0x22, 0x41,
+    0x7F, 0x40, 0x40, 0x40, 0x40,
+    0x7F, 0x02, 0x1C, 0x02, 0x7F,
+    0x7F, 0x04, 0x08, 0x10, 0x7F,
+    0x3E, 0x41, 0x41, 0x41, 0x3E,
+    0x7F, 0x09, 0x09, 0x09, 0x06,
+    0x3E, 0x41, 0x51, 0x21, 0x5E,
+    0x7F, 0x09, 0x19, 0x29, 0x46,
+    0x26, 0x49, 0x49, 0x49, 0x32,
+    0x03, 0x01, 0x7F, 0x01, 0x03,
+    0x3F, 0x40, 0x40, 0x40, 0x3F,
+    0x1F, 0x20, 0x40, 0x20, 0x1F,
+    0x3F, 0x40, 0x38, 0x40, 0x3F,
+    0x63, 0x14, 0x08, 0x14, 0x63,
+    0x03, 0x04, 0x78, 0x04, 0x03,
+    0x61, 0x59, 0x49, 0x4D, 0x43,
+    0x00, 0x7F, 0x41, 0x41, 0x41,
+    0x02, 0x04, 0x08, 0x10, 0x20,
+    0x00, 0x41, 0x41, 0x41, 0x7F,
+    0x04, 0x02, 0x01, 0x02, 0x04,
+    0x40, 0x40, 0x40, 0x40, 0x40,
+    0x00, 0x03, 0x07, 0x08, 0x00,
+    0x20, 0x54, 0x54, 0x78, 0x40,
+    0x7F, 0x28, 0x44, 0x44, 0x38,
+    0x38, 0x44, 0x44, 0x44, 0x28,
+    0x38, 0x44, 0x44, 0x28, 0x7F,
+    0x38, 0x54, 0x54, 0x54, 0x18,
+    0x00, 0x08, 0x7E, 0x09, 0x02,
+    0x18, 0xA4, 0xA4, 0x9C, 0x78,
+    0x7F, 0x08, 0x04, 0x04, 0x78,
+    0x00, 0x44, 0x7D, 0x40, 0x00,
+    0x20, 0x40, 0x40, 0x3D, 0x00,
+    0x7F, 0x10, 0x28, 0x44, 0x00,
+    0x00, 0x41, 0x7F, 0x40, 0x00,
+    0x7C, 0x04, 0x78, 0x04, 0x78,
+    0x7C, 0x08, 0x04, 0x04, 0x78,
+    0x38, 0x44, 0x44, 0x44, 0x38,
+    0xFC, 0x18, 0x24, 0x24, 0x18,
+    0x18, 0x24, 0x24, 0x18, 0xFC,
+    0x7C, 0x08, 0x04, 0x04, 0x08,
+    0x48, 0x54, 0x54, 0x54, 0x24,
+    0x04, 0x04, 0x3F, 0x44, 0x24,
+    0x3C, 0x40, 0x40, 0x20, 0x7C,
+    0x1C, 0x20, 0x40, 0x20, 0x1C,
+    0x3C, 0x40, 0x30, 0x40, 0x3C,
+    0x44, 0x28, 0x10, 0x28, 0x44,
+    0x4C, 0x90, 0x90, 0x90, 0x7C,
+    0x44, 0x64, 0x54, 0x4C, 0x44,
+    0x00, 0x08, 0x36, 0x41, 0x00,
+    0x00, 0x00, 0x77, 0x00, 0x00,
+    0x00, 0x41, 0x36, 0x08, 0x00,
+    0x02, 0x01, 0x02, 0x04, 0x02,
+    0x3C, 0x26, 0x23, 0x26, 0x3C,
+    0x1E, 0xA1, 0xA1, 0x61, 0x12,
+    0x3A, 0x40, 0x40, 0x20, 0x7A,
+    0x38, 0x54, 0x54, 0x55, 0x59,
+    0x21, 0x55, 0x55, 0x79, 0x41,
+    0x21, 0x54, 0x54, 0x78, 0x41,
+    0x21, 0x55, 0x54, 0x78, 0x40,
+    0x20, 0x54, 0x55, 0x79, 0x40,
+    0x0C, 0x1E, 0x52, 0x72, 0x12,
+    0x39, 0x55, 0x55, 0x55, 0x59,
+    0x39, 0x54, 0x54, 0x54, 0x59,
+    0x39, 0x55, 0x54, 0x54, 0x58,
+    0x00, 0x00, 0x45, 0x7C, 0x41,
+    0x00, 0x02, 0x45, 0x7D, 0x42,
+    0x00, 0x01, 0x45, 0x7C, 0x40,
+    0xF0, 0x29, 0x24, 0x29, 0xF0,
+    0xF0, 0x28, 0x25, 0x28, 0xF0,
+    0x7C, 0x54, 0x55, 0x45, 0x00,
+    0x20, 0x54, 0x54, 0x7C, 0x54,
+    0x7C, 0x0A, 0x09, 0x7F, 0x49,
+    0x32, 0x49, 0x49, 0x49, 0x32,
+    0x32, 0x48, 0x48, 0x48, 0x32,
+    0x32, 0x4A, 0x48, 0x48, 0x30,
+    0x3A, 0x41, 0x41, 0x21, 0x7A,
+    0x3A, 0x42, 0x40, 0x20, 0x78,
+    0x00, 0x9D, 0xA0, 0xA0, 0x7D,
+    0x39, 0x44, 0x44, 0x44, 0x39,
+    0x3D, 0x40, 0x40, 0x40, 0x3D,
+    0x3C, 0x24, 0xFF, 0x24, 0x24,
+    0x48, 0x7E, 0x49, 0x43, 0x66,
+    0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
+    0xFF, 0x09, 0x29, 0xF6, 0x20,
+    0xC0, 0x88, 0x7E, 0x09, 0x03,
+    0x20, 0x54, 0x54, 0x79, 0x41,
+    0x00, 0x00, 0x44, 0x7D, 0x41,
+    0x30, 0x48, 0x48, 0x4A, 0x32,
+    0x38, 0x40, 0x40, 0x22, 0x7A,
+    0x00, 0x7A, 0x0A, 0x0A, 0x72,
+    0x7D, 0x0D, 0x19, 0x31, 0x7D,
+    0x26, 0x29, 0x29, 0x2F, 0x28,
+    0x26, 0x29, 0x29, 0x29, 0x26,
+    0x30, 0x48, 0x4D, 0x40, 0x20,
+    0x38, 0x08, 0x08, 0x08, 0x08,
+    0x08, 0x08, 0x08, 0x08, 0x38,
+    0x2F, 0x10, 0xC8, 0xAC, 0xBA,
+    0x2F, 0x10, 0x28, 0x34, 0xFA,
+    0x00, 0x00, 0x7B, 0x00, 0x00,
+    0x08, 0x14, 0x2A, 0x14, 0x22,
+    0x22, 0x14, 0x2A, 0x14, 0x08,
+    0xAA, 0x00, 0x55, 0x00, 0xAA,
+    0xAA, 0x55, 0xAA, 0x55, 0xAA,
+    0x00, 0x00, 0x00, 0xFF, 0x00,
+    0x10, 0x10, 0x10, 0xFF, 0x00,
+    0x14, 0x14, 0x14, 0xFF, 0x00,
+    0x10, 0x10, 0xFF, 0x00, 0xFF,
+    0x10, 0x10, 0xF0, 0x10, 0xF0,
+    0x14, 0x14, 0x14, 0xFC, 0x00,
+    0x14, 0x14, 0xF7, 0x00, 0xFF,
+    0x00, 0x00, 0xFF, 0x00, 0xFF,
+    0x14, 0x14, 0xF4, 0x04, 0xFC,
+    0x14, 0x14, 0x17, 0x10, 0x1F,
+    0x10, 0x10, 0x1F, 0x10, 0x1F,
+    0x14, 0x14, 0x14, 0x1F, 0x00,
+    0x10, 0x10, 0x10, 0xF0, 0x00,
+    0x00, 0x00, 0x00, 0x1F, 0x10,
+    0x10, 0x10, 0x10, 0x1F, 0x10,
+    0x10, 0x10, 0x10, 0xF0, 0x10,
+    0x00, 0x00, 0x00, 0xFF, 0x10,
+    0x10, 0x10, 0x10, 0x10, 0x10,
+    0x10, 0x10, 0x10, 0xFF, 0x10,
+    0x00, 0x00, 0x00, 0xFF, 0x14,
+    0x00, 0x00, 0xFF, 0x00, 0xFF,
+    0x00, 0x00, 0x1F, 0x10, 0x17,
+    0x00, 0x00, 0xFC, 0x04, 0xF4,
+    0x14, 0x14, 0x17, 0x10, 0x17,
+    0x14, 0x14, 0xF4, 0x04, 0xF4,
+    0x00, 0x00, 0xFF, 0x00, 0xF7,
+    0x14, 0x14, 0x14, 0x14, 0x14,
+    0x14, 0x14, 0xF7, 0x00, 0xF7,
+    0x14, 0x14, 0x14, 0x17, 0x14,
+    0x10, 0x10, 0x1F, 0x10, 0x1F,
+    0x14, 0x14, 0x14, 0xF4, 0x14,
+    0x10, 0x10, 0xF0, 0x10, 0xF0,
+    0x00, 0x00, 0x1F, 0x10, 0x1F,
+    0x00, 0x00, 0x00, 0x1F, 0x14,
+    0x00, 0x00, 0x00, 0xFC, 0x14,
+    0x00, 0x00, 0xF0, 0x10, 0xF0,
+    0x10, 0x10, 0xFF, 0x10, 0xFF,
+    0x14, 0x14, 0x14, 0xFF, 0x14,
+    0x10, 0x10, 0x10, 0x1F, 0x00,
+    0x00, 0x00, 0x00, 0xF0, 0x10,
+    0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+    0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+    0xFF, 0xFF, 0xFF, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xFF, 0xFF,
+    0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
+    0x38, 0x44, 0x44, 0x38, 0x44,
+    0x7C, 0x2A, 0x2A, 0x3E, 0x14,
+    0x7E, 0x02, 0x02, 0x06, 0x06,
+    0x02, 0x7E, 0x02, 0x7E, 0x02,
+    0x63, 0x55, 0x49, 0x41, 0x63,
+    0x38, 0x44, 0x44, 0x3C, 0x04,
+    0x40, 0x7E, 0x20, 0x1E, 0x20,
+    0x06, 0x02, 0x7E, 0x02, 0x02,
+    0x99, 0xA5, 0xE7, 0xA5, 0x99,
+    0x1C, 0x2A, 0x49, 0x2A, 0x1C,
+    0x4C, 0x72, 0x01, 0x72, 0x4C,
+    0x30, 0x4A, 0x4D, 0x4D, 0x30,
+    0x30, 0x48, 0x78, 0x48, 0x30,
+    0xBC, 0x62, 0x5A, 0x46, 0x3D,
+    0x3E, 0x49, 0x49, 0x49, 0x00,
+    0x7E, 0x01, 0x01, 0x01, 0x7E,
+    0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
+    0x44, 0x44, 0x5F, 0x44, 0x44,
+    0x40, 0x51, 0x4A, 0x44, 0x40,
+    0x40, 0x44, 0x4A, 0x51, 0x40,
+    0x00, 0x00, 0xFF, 0x01, 0x03,
+    0xE0, 0x80, 0xFF, 0x00, 0x00,
+    0x08, 0x08, 0x6B, 0x6B, 0x08,
+    0x36, 0x12, 0x36, 0x24, 0x36,
+    0x06, 0x0F, 0x09, 0x0F, 0x06,
+    0x00, 0x00, 0x18, 0x18, 0x00,
+    0x00, 0x00, 0x10, 0x10, 0x00,
+    0x30, 0x40, 0xFF, 0x01, 0x01,
+    0x00, 0x1F, 0x01, 0x01, 0x1E,
+    0x00, 0x19, 0x1D, 0x17, 0x12,
+    0x00, 0x3C, 0x3C, 0x3C, 0x3C,
+    0x00, 0x00, 0x00, 0x00, 0x00
+};
diff --git a/drivers/qwiic/util/font8x16.h b/drivers/qwiic/util/font8x16.h
new file mode 100644
index 000000000..c070e4ec8
--- /dev/null
+++ b/drivers/qwiic/util/font8x16.h
@@ -0,0 +1,127 @@
+/******************************************************************************
+font8x16.h
+Definition for medium font
+
+This file was imported from the MicroView library, written by GeekAmmo
+(https://github.com/geekammo/MicroView-Arduino-Library), and released under
+the terms of the GNU General Public License as published by the Free Software
+Foundation, either version 3 of the License, or (at your option) any later
+version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Modified by:
+Emil Varughese @ Edwin Robotics Pvt. Ltd.
+July 27, 2015
+https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
+******************************************************************************/
+#pragma once
+
+#include "progmem.h"
+
+static const unsigned char font8x16[] PROGMEM = {
+    // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
+    8,16,32,96,2,56,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00,
+    0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00,
+    0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00,
+    0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00,
+    0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00,
+    0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00,
+    0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00,
+    0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00,
+    0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00,
+    0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00,
+    0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00,
+    0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00,
+    0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
+    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00,
+    0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00,
+    0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00,
+    0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00,
+    0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00,
+    0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00,
+    0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00,
+    0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
+    0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
+    0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00,
+    0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00,
+    0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00,
+    0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00,
+    0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00,
+    0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00,
+    0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x01, 0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00,
+    0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00,
+    0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
+    0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
+    0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
+    0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
+    0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
+    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00,
+    0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00,
+    0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
+    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00,
+    0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00,
+    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00,
+    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
+    0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00,
+    0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00,
+    0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00,
+    0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00,
+    0x00, 0x10, 0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00,
+    0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
+    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+    0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00,
+    0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
+    0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00,
+    0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00,
+    0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00,
+    0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
diff --git a/keyboards/hadron/config.h b/keyboards/hadron/config.h
index 9111ad727..d54d2c543 100644
--- a/keyboards/hadron/config.h
+++ b/keyboards/hadron/config.h
@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x6060
 #define MANUFACTURER    ishtob
 #define PRODUCT         Hadron Keyboard
-#define DESCRIPTION     A cherry ML ortholinear keyboard
+#define DESCRIPTION     A low profile ortholinear keyboard
 
 
 
@@ -46,9 +46,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEBOUNCING_DELAY 5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
+//#define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
+//#define LOCKING_RESYNC_ENABLE
 
 /* key combination for command */
 #define IS_COMMAND() ( \
@@ -70,7 +70,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
 
 
diff --git a/keyboards/hadron/hadron.c b/keyboards/hadron/hadron.c
index ca5b20e89..fa5065b32 100644
--- a/keyboards/hadron/hadron.c
+++ b/keyboards/hadron/hadron.c
@@ -1,26 +1,2 @@
 #include "hadron.h"
 
-
-void matrix_init_kb(void) {
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
\ No newline at end of file
diff --git a/keyboards/hadron/hadron.h b/keyboards/hadron/hadron.h
index a165f4c5c..426face6f 100644
--- a/keyboards/hadron/hadron.h
+++ b/keyboards/hadron/hadron.h
@@ -7,7 +7,9 @@
 #ifdef SUBPROJECT_ver2
     #include "ver2.h"
 #endif
-
+#ifdef SUBPROJECT_ver3
+    #include "ver3.h"
+#endif
 #include "quantum.h"
 
 
diff --git a/keyboards/hadron/keymaps/default/config.h b/keyboards/hadron/keymaps/default/config.h
deleted file mode 100644
index 09922b61b..000000000
--- a/keyboards/hadron/keymaps/default/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define LEADER_TIMEOUT 300
-//#define BACKLIGHT_BREATHING
-
-#define USE_I2C
-#define SSD1306OLED
-#define OLED_ROTATE180
-
-/* ws2812 RGB LED*/
-#define RGB_DI_PIN D4
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 14     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#endif
diff --git a/keyboards/hadron/keymaps/default/keymap.c b/keyboards/hadron/keymaps/default/keymap.c
deleted file mode 100644
index de5979c1d..000000000
--- a/keyboards/hadron/keymaps/default/keymap.c
+++ /dev/null
@@ -1,493 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "LUFA/Drivers/Peripheral/TWI.h"
-#ifdef AUDIO_ENABLE
-  #include "audio.h"
-#endif
-#ifdef USE_I2C
-#include "i2c.h"
-#endif
-#ifdef SSD1306OLED
-#include "ssd1306.h"
-#endif
-extern keymap_config_t keymap_config;
-
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _MOUSECURSOR 8
-#define _ADJUST 16
-
-enum preonic_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  BACKLIT,
-  RGBLED_TOGGLE,
-  RGBLED_STEP_MODE,
-  RGBLED_INCREASE_HUE,
-  RGBLED_DECREASE_HUE,
-  RGBLED_INCREASE_SAT,
-  RGBLED_DECREASE_SAT,
-  RGBLED_INCREASE_VAL,
-  RGBLED_DECREASE_VAL,
-};
-
-enum macro_keycodes {
-  KC_DEMOMACRO,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-// Custom macros
-#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
-#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
-#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
-#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
-// Requires KC_TRNS/_______ for the trigger key in the destination layer
-#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
-#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
-#define DEMOMACRO   M(KC_DEMOMACRO)            // Sample for macros
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,------+------+------+------+------+------------------------------------------------.
- * | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  DEL |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   7  |   8  |   9  |   Y  |   U  |   I  |   O  |   P  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | CAPS |   A  |   S  |   D  |   F  |   G  |   4  |   5  |   6  |   H  |   J  |   K  |   L  | ;/Nav|  '   |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   1  |   2  |   3  |   N  |   M  |   ,  |   .  |   /  |Ctl/Et|
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |  `   | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_QWERTY] = LAYOUT(
-  KC_ESC,   KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10,  KC_DEL,\
-  KC_TAB,   KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_P7,   KC_P8,   KC_P9,    KC_Y,    KC_U,    KC_I,   KC_O,    KC_P,     KC_BSPC, \
-  KC_CAPS,  KC_A,     KC_S,    KC_D,    KC_F,    KC_G,    KC_P4,   KC_P5,   KC_P6,    KC_H,    KC_J,    KC_K,   KC_L,LT_MC(KC_SCLN), KC_QUOT, \
-  KC_LSFT,  KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_P1,   KC_P2,   KC_P3,    KC_N,    KC_M,    KC_COMM,KC_DOT,  KC_SLSH,  CTL_ENT, \
-  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,  KC_SPC,   RAISE,   KC_LEFT,KC_DOWN, KC_UP,    KC_RGHT  \
-),
-
-/* Colemak
- * ,------+------+------+------+------+------------------------------------------------.
- * | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |   0  |   -  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * | Tab  |   Q  |   W  |   F  |   P  |   G  |   7  |   8  |   9  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
- * | CAPS |   A  |   R  |   S  |   T  |   D  |   4  |   5  |   6  |   H  |   N  |   E  |   I  |   O  |  '   |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   1  |   2  |   3  |   K  |   M  |   ,  |   .  |   /  |Ctl/Et|
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |   `  | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_COLEMAK] = LAYOUT(
-  KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10, KC_DEL,\
-  KC_TAB,   KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_P7,   KC_P8,   KC_P9,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN,  KC_BSPC, \
-  KC_LCTRL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_P4,   KC_P5,   KC_P6,    KC_H,    KC_N,    KC_E,    KC_I, LT_MC(KC_O), KC_QUOT, \
-  KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_P1,   KC_P2,   KC_P3,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  CTL_ENT, \
-  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,  KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,   KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,    KC_RGHT  \
-  ),
-
-/* Dvorak
- * ,------+------+------+------+------+------------------------------------------------.
- * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   7  |   8  |   9  |   F  |   G  |   C  |   R  |   L  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
- * | Esc  |   A  |   O  |   E  |   U  |   I  |   4  |   5  |   6  |   D  |   H  |   T  |   N  |   S  |  /   |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | Shift|   ;  |   Q  |   J  |   K  |   X  |   1  |   2  |   3  |   B  |   M  |   W  |   V  |   Z  |Ctl/Et|
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |   `  | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_DVORAK] = LAYOUT(
-  KC_ESC,   KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10, KC_DEL,\
-  KC_TAB,   KC_QUOT,  KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_P7,   KC_P8,   KC_P9,    KC_F,    KC_G,   KC_C,    KC_R,    KC_L,     KC_BSPC, \
-  KC_LCTL,  KC_A,     KC_O,    KC_E,    KC_U,    KC_I,    KC_P4,   KC_P5,   KC_P6,    KC_D,    KC_H,   KC_T,    KC_N, LT_MC(KC_S), KC_SLSH, \
-  KC_LSFT,  KC_SCLN,  KC_Q,    KC_J,    KC_K,    KC_X,    KC_P1,   KC_P2,   KC_P3,    KC_B,    KC_M,   KC_W,    KC_V,    KC_Z,     CTL_ENT, \
-  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,   KC_SPC,  RAISE,  KC_LEFT, KC_DOWN, KC_UP,    KC_RGHT \
-),
-
-/* Lower
- * ,------+------+------+------+------+------------------------------------------------.
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * |   ~  |   !  |   @  |   #  |   $  |   %  |      |      |      |   ^  |   &  |   *  |   (  |   )  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
- * |      |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   _  |   +  |   {  |   }  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 |ISO ~ |ISO | |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_LOWER] = LAYOUT(
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR,  KC_LPRN, KC_RPRN, KC_DEL, \
-  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_UNDS, KC_PLUS,  KC_LBRC, KC_RBRC, KC_PIPE, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Raise
- * ,------+------+------+------+------+------------------------------------------------.
- * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |      |      |      |   6  |   7  |   8  |   9  |   0  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 |ISO # |ISO / |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_RAISE] = LAYOUT(
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
-  _______, _______, _______, _______,  _______, KC_SPC, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY   \
-),
-
-/* Mouse Layer (semi-col)
- * ,------+------+------+------+------+------------------------------------------------.
- * | ACCL0| ACCL1| ACCL2|      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * |      |      |      |      |      |      |      |      | Home | Wh_Up| WHL_L| M_Up | WHL_R| Macro|      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      | End  | Wh_Dn| M_Lft| M_Dn | M_Rt |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      | BTN2 | BTN3 | BTN4 | BTN5 |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      | BTN1 |      |      |      | BTN1 |      |      |      |      |      |
- * `--------------------------------------------------------------------------------------------------------'
- */
-
-[_MOUSECURSOR] = LAYOUT(
-  KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R,DEMOMACRO,_______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, \
-  _______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______  \
-),
-
-/* Adjust (Lower + Raise)
- * ,------+------+------+------+------+------------------------------------------------.
- * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +|      |      |      |      |      |  Del |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|      |      |      |AGswap|Qwerty|Colemk|      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |Voice-|Voice+|Mus on|Musoff|      |      |      |      |      |      |      | BL + |BL ST |BL TG |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_ADJUST] = LAYOUT(
-  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-  RESET,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \
-  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, _______, _______, _______, AG_SWAP, QWERTY,  COLEMAK, _______,  _______,  _______, \
-  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF, _______, _______, _______,  _______, BL_DEC,  BL_INC,  BL_STEP, BL_TOGG, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\
-)
-
-
-
-};
-
-
-#ifdef AUDIO_ENABLE
-
-float tone_startup[][2]    = SONG(STARTUP_SOUND);
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
-float tone_goodbye[][2]    = SONG(GOODBYE_SOUND);
-#endif
-
-// define variables for reactive RGB
-bool RGB_INIT = false;
-bool TOG_STATUS = false;
-int RGB_current_mode;
-
-
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-    rgblight_mode(RGB_current_mode);
-    layer_on(layer3);
-  } else {
-    layer_off(layer3);
-  }
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_qwerty);
-        #endif
-        persistant_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_colemak);
-        #endif
-        persistant_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-          //not sure how to have keyboard check mode and set it to a variable, so my work around
-          //uses another variable that would be set to true after the first time a reactive key is pressed.
-        if (RGB_INIT) {} else {
-          RGB_current_mode = rgblight_config.mode;
-          RGB_INIT = true;
-        }
-        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
-        } else {
-          TOG_STATUS = !TOG_STATUS;
-          rgblight_mode(16);
-        }
-        layer_on(_LOWER);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      } else {
-        rgblight_mode(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
-        TOG_STATUS = false;
-        layer_off(_LOWER);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        //not sure how to have keyboard check mode and set it to a variable, so my work around
-        //uses another variable that would be set to true after the first time a reactive key is pressed.
-        if (RGB_INIT) {} else {
-          RGB_current_mode = rgblight_config.mode;
-          RGB_INIT = true;
-        }
-        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
-        } else {
-          TOG_STATUS = !TOG_STATUS;
-          rgblight_mode(15);
-        }
-        layer_on(_RAISE);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      } else {
-        rgblight_mode(RGB_current_mode);  // revert RGB to initial mode prior to RGB mode change
-        layer_off(_RAISE);
-        TOG_STATUS = false;
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case BACKLIT:
-      if (record->event.pressed) {
-        register_code(KC_RSFT);
-        #ifdef BACKLIGHT_ENABLE
-          backlight_step();
-        #endif
-      } else {
-        unregister_code(KC_RSFT);
-      }
-      return false;
-      break;
-    case RGB_MOD:
-      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
-      if (record->event.pressed) {
-        rgblight_mode(RGB_current_mode);
-        rgblight_step();
-        RGB_current_mode = rgblight_config.mode;
-      }
-      return false;
-      break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-  #ifdef USE_I2C
-    i2c_master_init();
-  #ifdef SSD1306OLED
-  // calls code for the SSD1306 OLED
-        _delay_ms(400);
-        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
-        iota_gfx_init();   // turns on the display
-  #endif
-  #endif
-    #ifdef AUDIO_ENABLE
-        startup_user();
-    #endif
-}
-
-void matrix_scan_user(void) {
-    #ifdef SSD1306OLED
-     iota_gfx_task();  // this is what updates the display continuously
-    #endif
-}
-
-#ifdef AUDIO_ENABLE
-
-void startup_user()
-{
-    _delay_ms(20); // gets rid of tick
-    PLAY_SONG(tone_startup);
-}
-
-void shutdown_user()
-{cc
-    PLAY_SONG(tone_goodbye);
-    _delay_ms(150);
-    stop_all_notes();
-}
-
-void music_on_user(void)
-{
-    music_scale_user();
-}
-
-void music_scale_user(void)
-{
-    PLAY_SONG(music_scale);
-}
-
-#endif
-
-/*
- * Macro definition
- */
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    if (!eeconfig_is_enabled()) {
-      eeconfig_init();
-    }
-
-    switch (id) {
-      case KC_DEMOMACRO:
-        if (record->event.pressed){
-          return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D),  END);
-        }
-    }
-
-    return MACRO_NONE;
-}
-
-void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER 8
-#define L_RAISE 16
-#define L_FNLAYER 64
-#define L_NUMLAY 128
-#define L_NLOWER 136
-#define L_NFNLAYER 192
-#define L_MOUSECURSOR 256
-#define L_ADJUST 65560
-
-void iota_gfx_task_user(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case L_BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case L_RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case L_LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case L_ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
-}
-
diff --git a/keyboards/hadron/keymaps/default/readme.md b/keyboards/hadron/keymaps/default/readme.md
deleted file mode 100644
index de9680b49..000000000
--- a/keyboards/hadron/keymaps/default/readme.md
+++ /dev/null
@@ -1,2 +0,0 @@
-# The Default Planck Layout
-
diff --git a/keyboards/hadron/keymaps/default/rules.mk b/keyboards/hadron/keymaps/default/rules.mk
deleted file mode 100644
index 4c6d04f1e..000000000
--- a/keyboards/hadron/keymaps/default/rules.mk
+++ /dev/null
@@ -1,24 +0,0 @@
-
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no      # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
-SWAP_HANDS_ENABLE = no        # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-EXTRAFLAGS += -flto
diff --git a/keyboards/hadron/keymaps/readme.md b/keyboards/hadron/keymaps/readme.md
deleted file mode 100644
index 54fb5f6d9..000000000
--- a/keyboards/hadron/keymaps/readme.md
+++ /dev/null
@@ -1,23 +0,0 @@
-# How to add your own keymap
-
-Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
-
-    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
-
-\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
-
-and contain the following files:
-
-* `keymap.c`
-* `readme.md` *recommended*
-* `config.h` *optional*, found automatically when compiling
-* `Makefile` *optional*, found automatically when compling
-
-When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
-
-     * **folder_name** description
-
-# List of Planck keymaps
-
-* **default** default Planck layout
-* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file
diff --git a/keyboards/hadron/keymaps/side_numpad/config.h b/keyboards/hadron/keymaps/side_numpad/config.h
deleted file mode 100644
index 09922b61b..000000000
--- a/keyboards/hadron/keymaps/side_numpad/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define LEADER_TIMEOUT 300
-//#define BACKLIGHT_BREATHING
-
-#define USE_I2C
-#define SSD1306OLED
-#define OLED_ROTATE180
-
-/* ws2812 RGB LED*/
-#define RGB_DI_PIN D4
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 14     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-
-#endif
diff --git a/keyboards/hadron/keymaps/side_numpad/keymap.c b/keyboards/hadron/keymaps/side_numpad/keymap.c
deleted file mode 100644
index fa42c79ea..000000000
--- a/keyboards/hadron/keymaps/side_numpad/keymap.c
+++ /dev/null
@@ -1,502 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "LUFA/Drivers/Peripheral/TWI.h"
-#ifdef AUDIO_ENABLE
-  #include "audio.h"
-#endif
-#ifdef USE_I2C
-#include "i2c.h"
-#endif
-#ifdef SSD1306OLED
-#include "ssd1306.h"
-#endif
-extern keymap_config_t keymap_config;
-
-//Following line allows macro to read current RGB settings
-extern rgblight_config_t rgblight_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _LOWER 3
-#define _RAISE 4
-#define _FNLAYER 6
-#define _NUMLAY 7
-#define _MOUSECURSOR 8
-#define _ADJUST 16
-
-enum preonic_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  BACKLIT,
-  RGBLED_TOGGLE,
-  RGBLED_STEP_MODE,
-  RGBLED_INCREASE_HUE,
-  RGBLED_DECREASE_HUE,
-  RGBLED_INCREASE_SAT,
-  RGBLED_DECREASE_SAT,
-  RGBLED_INCREASE_VAL,
-  RGBLED_DECREASE_VAL,
-};
-
-enum macro_keycodes {
-  KC_DEMOMACRO,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-// Custom macros
-#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
-#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
-#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
-#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
-// Requires KC_TRNS/_______ for the trigger key in the destination layer
-#define LT_FN(kc)   LT(_FNLAYER, kc)            // L-ayer T-ap Function Layer
-#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
-#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
-#define TG_NUMLAY   TG(_NUMLAY)                 //Toggle for layer _NUMLAY
-#define DEMOMACRO    M(KC_DEMOMACRO)                // My login macros
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,------+------+------+------+------+------------------------------------------------.
- * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |   7  |   8  |   9  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | CAPS |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |Enter |   4  |   5  |   6  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |   =  |   1  |   2  |   3  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |   ~  | Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | RAlt | Ins  |  Del |NumLay|   0  |   .  |  ENT |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_QWERTY] = LAYOUT(
-  KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,          KC_MINS,\
-  KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,           KC_BSPC,    KC_P7,   KC_P8,   KC_P9, \
-  KC_CAPS,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    LT_MC(KC_SCLN), CTL_ENT,    KC_P4,   KC_P5,   KC_P6, \
-  KC_LSFT,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,         KC_EQL,    KC_P1,   KC_P2,   KC_P3, \
-  KC_GRV,    KC_RCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_RALT, KC_INS,  KC_DEL,       TG_NUMLAY,    KC_P0,   KC_PDOT, KC_PENT \
-),
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   ~  |  \   |      |      |      |
- * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
- * | CAPS |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |   [  |   ]  |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |      |      |      |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_LOWER] = LAYOUT(
-  KC_ESC,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,      KC_NO,      KC_NO,   KC_NO,   KC_NO,   KC_NO, \
-  KC_1,       KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,       KC_8,       KC_9,    KC_0,  KC_GRV, KC_BSLS, _______, _______, _______, \
-  KC_CAPS,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,    KC_UNDS,     KC_EQL, KC_LBRC, KC_RBRC, KC_PIPE, _______, _______, _______, \
-  _______,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______,    _______,    KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______\
-),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   ~  |  \   |      |      |      |
- * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
- * |      |   A  |  Up  |   D  | PrSc |      |   4  |   5  |   6  |   *  |   :  |  '   |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  Lt  |  Dn  |  Rt  | Mute |      |   1  |   2  |   3  |  Up  |   /  |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |Space |   0  |      | Left | Down | Right|      |      |      |      |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_RAISE] = LAYOUT(
-  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,   KC_F6, KC_F7,   KC_F8,      KC_F9,  KC_F10,   KC_F11,  KC_F12, \
-  KC_1,    KC_2,    KC_3,    KC_4,     KC_5,        KC_6,  KC_7,    KC_8,       KC_9,    KC_0,  KC_PLUS, KC_BSLS, _______, _______, _______, \
-  _______, KC_A,    KC_UP,   KC_D,     KC_PSCR,  _______,  KC_4,    KC_5,       KC_6, KC_PAST,  KC_COLN, KC_QUOT, _______, _______, _______, \
-  _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC__MUTE, _______,  KC_1,    KC_2,       KC_3,   KC_UP,  KC_SLSH, _______, _______, _______, _______, \
-  _______, _______, _______, _______,   _______,  KC_SPC,  KC_0,   _______,  KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______  \
-),
-
-/* FN layer on Esc key
- * ,-----------------------------------------------------------------------------------.
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * |      |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |   +  |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   =  |   [  |   ]  |  '   |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |   {  |   }  |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |      |      |      |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_FNLAYER] = LAYOUT(
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______,\
-  _______, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC, KC_CIRC,   KC_AMPR,    KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS, _______, _______, _______, \
-  _______,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,     KC_EQL, KC_LBRC, KC_RBRC, KC_QUOT, _______, _______, _______, \
-  _______,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______,   _______,    KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______ \
-),
-
-/* Num Layer
- * ,-----------------------------------------------------------------------------------.
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * |      |      |      |      |      |      |      |      |      |      |      |      |  F7  |  F8  |  F9  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |  F4  |  F5  |  F6  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |      |  Up  |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      | Exit | Left | Down | Rght |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_NUMLAY] = LAYOUT(
-  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______,\
-  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_INS,  KC_HOME,  KC_PGUP,   \
-  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_DEL,   KC_END,  KC_PGDN,   \
-  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_PMNS,    KC_UP,   KC_PPLS,   \
-  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT \
-),
-
-/* Mouse Layer (semi-col)
- * ,-----------------------------------------------------------------------------------.
- * |      |ACCL0| ACCL1| ACCL2 |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * |      |      |      |      |      | Home | Wh_Up| WHL_L| M_Up | WHL_R|      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      | End  | Wh_Dn| M_Lft| M_Dn | M_Rt |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      | BTN2 | BTN3 | BTN4 | BTN5 |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      | BTN1 |      |      |      | BTN1 |      |      |      |      |      |
- * `--------------------------------------------------------------------------------------------------------'
- */
-
-[_MOUSECURSOR] = LAYOUT(
-  _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______,   _______, _______,\
-  _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R, DEMOMACRO, _______, _______, _______, _______, \
-  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R,   _______, _______, _______, _______, _______, \
-  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5,   _______, _______, _______, _______, _______, \
-  _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______,   _______, _______, _______, _______, _______ \
-),
-
-/* Adjust (Lower + Raise)
-
- * ,-----------------------------------------------------------------------------------.
- * | Reset|      |      |      |      |      |      |      |      | VolD | VolU | Mute |
- * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
- * |      |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +|      |      |  Del |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      | BL + |BL ST |BLSTEP| BL TG|      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
- * `--------------------------------------------------------------------------------------------------------'
- */
-[_ADJUST] = LAYOUT(
-  RESET,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, \
-  _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,  KC_DEL, _______, _______, _______, \
-  _______, _______, _______,   AU_ON,  AU_OFF, AG_NORM, AG_SWAP,  QWERTY, _______, _______, _______, _______, _______, _______, _______, \
-  _______,  MUV_DE,  MUV_IN,   MU_ON,  MU_OFF,   MI_ON,  MI_OFF, _______, BL_DEC,  BL_INC,  BL_STEP, BL_TOGG, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-)
-
-
-
-};
-
-
-#ifdef AUDIO_ENABLE
-
-float tone_startup[][2]    = SONG(STARTUP_SOUND);
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
-float tone_goodbye[][2]    = SONG(GOODBYE_SOUND);
-#endif
-
-// define variables for reactive RGB
-bool RGB_INIT = false;
-bool TOG_STATUS = false;
-bool NUMLAY_STATUS = false;
-int RGB_current_mode;
-
-
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-    rgblight_mode(RGB_current_mode);
-    layer_on(layer3);
-  } else {
-    layer_off(layer3);
-  }
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_qwerty);
-        #endif
-        persistant_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-          //not sure how to have keyboard check mode and set it to a variable, so my work around
-          //uses another variable that would be set to true after the first time a reactive key is pressed.
-        if (RGB_INIT) {} else {
-          RGB_current_mode = rgblight_config.mode;
-          RGB_INIT = true;
-        }
-        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
-        } else {
-          TOG_STATUS = !TOG_STATUS;
-          rgblight_mode(16);
-        }
-        layer_on(_LOWER);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      } else {
-        rgblight_mode(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
-        TOG_STATUS = false;
-        layer_off(_LOWER);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        //not sure how to have keyboard check mode and set it to a variable, so my work around
-        //uses another variable that would be set to true after the first time a reactive key is pressed.
-        if (RGB_INIT) {} else {
-          RGB_current_mode = rgblight_config.mode;
-          RGB_INIT = true;
-        }
-        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
-        } else {
-          TOG_STATUS = !TOG_STATUS;
-          rgblight_mode(15);
-        }
-        layer_on(_RAISE);
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      } else {
-        rgblight_mode(RGB_current_mode);  // revert RGB to initial mode prior to RGB mode change
-        layer_off(_RAISE);
-        TOG_STATUS = false;
-        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case BACKLIT:
-      if (record->event.pressed) {
-        register_code(KC_RSFT);
-        #ifdef BACKLIGHT_ENABLE
-          backlight_step();
-        #endif
-      } else {
-        unregister_code(KC_RSFT);
-      }
-      return false;
-      break;
-      //my attempt for RGB layer lock indication via changing the mode, still have to figure out how to not have other keypress not override this mode
-    case TG_NUMLAY:
-      if (record->event.pressed) {
-        if (RGB_INIT) {} else {
-          RGB_current_mode = rgblight_config.mode;
-          RGB_INIT = true;
-        }
-        NUMLAY_STATUS = !NUMLAY_STATUS;
-        if (NUMLAY_STATUS) {
-        rgblight_mode(4);
-        layer_on(_NUMLAY);
-        } else {
-        rgblight_mode(RGB_current_mode);
-        layer_off(_NUMLAY); }
-      }
-      return false;
-      break;
-    case RGB_MOD:
-      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
-      if (record->event.pressed) {
-        rgblight_mode(RGB_current_mode);
-        rgblight_step();
-        RGB_current_mode = rgblight_config.mode;
-      }
-      return false;
-      break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-  #ifdef USE_I2C
-    i2c_master_init();
-  #ifdef SSD1306OLED
-  // calls code for the SSD1306 OLED
-        _delay_ms(400);
-        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
-        iota_gfx_init();   // turns on the display
-  #endif
-  #endif
-    #ifdef AUDIO_ENABLE
-        startup_user();
-    #endif
-}
-
-void matrix_scan_user(void) {
-    #ifdef SSD1306OLED
-     iota_gfx_task();  // this is what updates the display continuously
-    #endif
-}
-
-#ifdef AUDIO_ENABLE
-
-void startup_user()
-{
-    _delay_ms(20); // gets rid of tick
-    PLAY_SONG(tone_startup);
-}
-
-void shutdown_user()
-{cc
-    PLAY_SONG(tone_goodbye);
-    _delay_ms(150);
-    stop_all_notes();
-}
-
-void music_on_user(void)
-{
-    music_scale_user();
-}
-
-void music_scale_user(void)
-{
-    PLAY_SONG(music_scale);
-}
-
-#endif
-
-/*
- * Macro definition
- */
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    if (!eeconfig_is_enabled()) {
-      eeconfig_init();
-    }
-
-    switch (id) {
-      case KC_DEMOMACRO:
-        if (record->event.pressed){
-          return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D),  END);
-        }
-    }
-
-    return MACRO_NONE;
-}
-
-void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER 8
-#define L_RAISE 16
-#define L_FNLAYER 64
-#define L_NUMLAY 128
-#define L_NLOWER 136
-#define L_NFNLAYER 192
-#define L_MOUSECURSOR 256
-#define L_ADJUST 65560
-
-void iota_gfx_task_user(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case L_BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case L_RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case L_LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case L_ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
-}
diff --git a/keyboards/hadron/keymaps/side_numpad/readme.md b/keyboards/hadron/keymaps/side_numpad/readme.md
deleted file mode 100644
index de9680b49..000000000
--- a/keyboards/hadron/keymaps/side_numpad/readme.md
+++ /dev/null
@@ -1,2 +0,0 @@
-# The Default Planck Layout
-
diff --git a/keyboards/hadron/keymaps/side_numpad/rules.mk b/keyboards/hadron/keymaps/side_numpad/rules.mk
deleted file mode 100644
index 687c285bd..000000000
--- a/keyboards/hadron/keymaps/side_numpad/rules.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = yes            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
-SWAP_HANDS_ENABLE = no        # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
\ No newline at end of file
diff --git a/keyboards/hadron/readme.md b/keyboards/hadron/readme.md
index ebebab9e6..13ef6c66a 100644
--- a/keyboards/hadron/readme.md
+++ b/keyboards/hadron/readme.md
@@ -2,10 +2,10 @@
 
 ![Hadron](https://i.imgur.com/aFbvV08.jpg)
 
-A low-profile Cherry ML ortholinear build.
+A low-profile ortholinear build.
 
 Keyboard Maintainer: [ishtob](https://github.com/ishtob), [QMK](https://github.com/qmk)  
-Hardware Supported: Hadron PCB rev0, rev2  
+Hardware Supported: Hadron PCB rev0, rev2, rev3 
 
 Make example for this keyboard (after setting up your build environment):
 
diff --git a/keyboards/hadron/rules.mk b/keyboards/hadron/rules.mk
index 2a8b78045..bd1633f61 100644
--- a/keyboards/hadron/rules.mk
+++ b/keyboards/hadron/rules.mk
@@ -1,75 +1,2 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-BOOTLOADER = halfkay
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
-API_SYSEX_ENABLE = yes
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-SRC = i2c.c \
-	  ssd1306.c
 
 DEFAULT_FOLDER = hadron/ver2
-
-EXTRAFLAGS += -flto
diff --git a/keyboards/hadron/ver2/config.h b/keyboards/hadron/ver2/config.h
index 5ee3f931f..e051db209 100644
--- a/keyboards/hadron/ver2/config.h
+++ b/keyboards/hadron/ver2/config.h
@@ -29,4 +29,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define UNUSED_PINS
 
 
+#define USE_I2C
+#define SSD1306OLED
+#define OLED_ROTATE180
+
+/* ws2812 RGB LED*/
+#define RGB_DI_PIN D4
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
 
diff --git a/keyboards/hadron/ver2/keymaps/default/config.h b/keyboards/hadron/ver2/keymaps/default/config.h
new file mode 100644
index 000000000..e1fdd6dd3
--- /dev/null
+++ b/keyboards/hadron/ver2/keymaps/default/config.h
@@ -0,0 +1,9 @@
+#pragma once
+
+#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                              SONG(COLEMAK_SOUND) \
+                            }
+                            
+#define LEADER_TIMEOUT 300
+//#define BACKLIGHT_BREATHING
+
diff --git a/keyboards/hadron/ver2/keymaps/default/keymap.c b/keyboards/hadron/ver2/keymaps/default/keymap.c
new file mode 100644
index 000000000..cc79f5267
--- /dev/null
+++ b/keyboards/hadron/ver2/keymaps/default/keymap.c
@@ -0,0 +1,448 @@
+#include QMK_KEYBOARD_H
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#ifdef USE_I2C
+#include "i2c.h"
+#endif
+#ifdef SSD1306OLED
+#include "ssd1306.h"
+#endif
+extern keymap_config_t keymap_config;
+
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _MOUSECURSOR 8
+#define _ADJUST 16
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  RGBLED_TOGGLE,
+  RGBLED_STEP_MODE,
+  RGBLED_INCREASE_HUE,
+  RGBLED_DECREASE_HUE,
+  RGBLED_INCREASE_SAT,
+  RGBLED_DECREASE_SAT,
+  RGBLED_INCREASE_VAL,
+  RGBLED_DECREASE_VAL,
+};
+
+enum macro_keycodes {
+  KC_DEMOMACRO,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
+#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
+#define DEMOMACRO   M(KC_DEMOMACRO)            // Sample for macros
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,------+------+------+------+------+------------------------------------------------.
+ * | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  DEL |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   7  |   8  |   9  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | CAPS |   A  |   S  |   D  |   F  |   G  |   4  |   5  |   6  |   H  |   J  |   K  |   L  | ;/Nav|  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   1  |   2  |   3  |   N  |   M  |   ,  |   .  |   /  |Ctl/Et|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |  `   | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT(
+  KC_ESC,   KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10,  KC_DEL,\
+  KC_TAB,   KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_P7,   KC_P8,   KC_P9,    KC_Y,    KC_U,    KC_I,   KC_O,    KC_P,     KC_BSPC, \
+  KC_CAPS,  KC_A,     KC_S,    KC_D,    KC_F,    KC_G,    KC_P4,   KC_P5,   KC_P6,    KC_H,    KC_J,    KC_K,   KC_L,LT_MC(KC_SCLN), KC_QUOT, \
+  KC_LSFT,  KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_P1,   KC_P2,   KC_P3,    KC_N,    KC_M,    KC_COMM,KC_DOT,  KC_SLSH,  CTL_ENT, \
+  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,  KC_SPC,   RAISE,   KC_LEFT,KC_DOWN, KC_UP,    KC_RGHT  \
+),
+
+/* Colemak
+ * ,------+------+------+------+------+------------------------------------------------.
+ * | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   7  |   8  |   9  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | CAPS |   A  |   R  |   S  |   T  |   D  |   4  |   5  |   6  |   H  |   N  |   E  |   I  |   O  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   1  |   2  |   3  |   K  |   M  |   ,  |   .  |   /  |Ctl/Et|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT(
+  KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10, KC_DEL,\
+  KC_TAB,   KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_P7,   KC_P8,   KC_P9,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN,  KC_BSPC, \
+  KC_LCTRL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_P4,   KC_P5,   KC_P6,    KC_H,    KC_N,    KC_E,    KC_I, LT_MC(KC_O), KC_QUOT, \
+  KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_P1,   KC_P2,   KC_P3,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  CTL_ENT, \
+  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,  KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,   KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,    KC_RGHT  \
+  ),
+
+/* Dvorak
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   7  |   8  |   9  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   4  |   5  |   6  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   1  |   2  |   3  |   B  |   M  |   W  |   V  |   Z  |Ctl/Et|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT(
+  KC_ESC,   KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10, KC_DEL,\
+  KC_TAB,   KC_QUOT,  KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_P7,   KC_P8,   KC_P9,    KC_F,    KC_G,   KC_C,    KC_R,    KC_L,     KC_BSPC, \
+  KC_LCTL,  KC_A,     KC_O,    KC_E,    KC_U,    KC_I,    KC_P4,   KC_P5,   KC_P6,    KC_D,    KC_H,   KC_T,    KC_N, LT_MC(KC_S), KC_SLSH, \
+  KC_LSFT,  KC_SCLN,  KC_Q,    KC_J,    KC_K,    KC_X,    KC_P1,   KC_P2,   KC_P3,    KC_B,    KC_M,   KC_W,    KC_V,    KC_Z,     CTL_ENT, \
+  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,   KC_SPC,  RAISE,  KC_LEFT, KC_DOWN, KC_UP,    KC_RGHT \
+),
+
+/* Lower
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |      |      |      |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 |ISO ~ |ISO | |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR,  KC_LPRN, KC_RPRN, KC_DEL, \
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_UNDS, KC_PLUS,  KC_LBRC, KC_RBRC, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |      |      |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 |ISO # |ISO / |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______,  _______, KC_SPC, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY   \
+),
+
+/* Mouse Layer (semi-col)
+ * ,------+------+------+------+------+------------------------------------------------.
+ * | ACCL0| ACCL1| ACCL2|      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |      |      |      |      |      |      |      | Home | Wh_Up| WHL_L| M_Up | WHL_R| Macro|      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | End  | Wh_Dn| M_Lft| M_Dn | M_Rt |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      | BTN2 | BTN3 | BTN4 | BTN5 |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      | BTN1 |      |      |      | BTN1 |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+
+[_MOUSECURSOR] = LAYOUT(
+  KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R,DEMOMACRO,_______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, \
+  _______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______  \
+),
+
+/* Adjust (Lower + Raise)
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +|      |      |      |      |      |  Del |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|      |      |      |AGswap|Qwerty|Colemk|      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|      |      |      |      |      |      |      | BL + |BL ST |BL TG |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT(
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+  RESET,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, _______, _______, _______, AG_SWAP, QWERTY,  COLEMAK, _______,  _______,  _______, \
+  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF, _______, _______, _______,  _______, BL_DEC,  BL_INC,  BL_STEP, BL_TOGG, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\
+)
+
+
+
+};
+
+// define variables for reactive RGB
+bool RGB_INIT = false;
+bool TOG_STATUS = false;
+int RGB_current_mode;
+
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    rgblight_mode(RGB_current_mode);
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+          //not sure how to have keyboard check mode and set it to a variable, so my work around
+          //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          rgblight_mode(16);
+        }
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        rgblight_mode(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
+        TOG_STATUS = false;
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        //not sure how to have keyboard check mode and set it to a variable, so my work around
+        //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          rgblight_mode(15);
+        }
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        rgblight_mode(RGB_current_mode);  // revert RGB to initial mode prior to RGB mode change
+        layer_off(_RAISE);
+        TOG_STATUS = false;
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case RGB_MOD:
+      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
+      if (record->event.pressed) {
+        rgblight_mode(RGB_current_mode);
+        rgblight_step();
+        RGB_current_mode = rgblight_config.mode;
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    if (!eeconfig_is_enabled()) {
+      eeconfig_init();
+    }
+
+    switch (id) {
+      case KC_DEMOMACRO:
+        if (record->event.pressed){
+          return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D),  END);
+        }
+    }
+
+    return MACRO_NONE;
+}
+
+
+//Functions for ver2
+#ifdef KEYBOARD_hadron_ver2
+#include "LUFA/Drivers/Peripheral/TWI.h"
+void matrix_init_user(void) {
+  #ifdef USE_I2C
+    i2c_master_init();
+  #ifdef SSD1306OLED
+  // calls code for the SSD1306 OLED
+        _delay_ms(400);
+        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
+        iota_gfx_init();   // turns on the display
+  #endif
+  #endif
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+
+void matrix_scan_user(void) {
+    #ifdef SSD1306OLED
+     iota_gfx_task();  // this is what updates the display continuously
+    #endif
+}
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case L_BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case L_RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case L_LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case L_ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/hadron/ver2/keymaps/default/readme.md b/keyboards/hadron/ver2/keymaps/default/readme.md
new file mode 100644
index 000000000..de9680b49
--- /dev/null
+++ b/keyboards/hadron/ver2/keymaps/default/readme.md
@@ -0,0 +1,2 @@
+# The Default Planck Layout
+
diff --git a/keyboards/hadron/ver2/keymaps/readme.md b/keyboards/hadron/ver2/keymaps/readme.md
new file mode 100644
index 000000000..54fb5f6d9
--- /dev/null
+++ b/keyboards/hadron/ver2/keymaps/readme.md
@@ -0,0 +1,23 @@
+# How to add your own keymap
+
+Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
+
+    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
+
+\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
+
+and contain the following files:
+
+* `keymap.c`
+* `readme.md` *recommended*
+* `config.h` *optional*, found automatically when compiling
+* `Makefile` *optional*, found automatically when compling
+
+When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
+
+     * **folder_name** description
+
+# List of Planck keymaps
+
+* **default** default Planck layout
+* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file
diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/config.h b/keyboards/hadron/ver2/keymaps/side_numpad/config.h
new file mode 100644
index 000000000..409279a95
--- /dev/null
+++ b/keyboards/hadron/ver2/keymaps/side_numpad/config.h
@@ -0,0 +1,8 @@
+#pragma once
+
+#define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND)\
+                            }
+                            
+#define LEADER_TIMEOUT 300
+//#define BACKLIGHT_BREATHING
+
diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c
new file mode 100644
index 000000000..248bb7ca6
--- /dev/null
+++ b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c
@@ -0,0 +1,484 @@
+#include QMK_KEYBOARD_H
+#include "LUFA/Drivers/Peripheral/TWI.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#ifdef USE_I2C
+#include "i2c.h"
+#endif
+#ifdef SSD1306OLED
+#include "ssd1306.h"
+#endif
+extern keymap_config_t keymap_config;
+
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 3
+#define _RAISE 4
+#define _FNLAYER 6
+#define _NUMLAY 7
+#define _MOUSECURSOR 8
+#define _ADJUST 16
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  RGBLED_TOGGLE,
+  RGBLED_STEP_MODE,
+  RGBLED_INCREASE_HUE,
+  RGBLED_DECREASE_HUE,
+  RGBLED_INCREASE_SAT,
+  RGBLED_DECREASE_SAT,
+  RGBLED_INCREASE_VAL,
+  RGBLED_DECREASE_VAL,
+};
+
+enum macro_keycodes {
+  KC_DEMOMACRO,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
+#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_FN(kc)   LT(_FNLAYER, kc)            // L-ayer T-ap Function Layer
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
+#define TG_NUMLAY   TG(_NUMLAY)                 //Toggle for layer _NUMLAY
+#define DEMOMACRO    M(KC_DEMOMACRO)                // My login macros
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |   7  |   8  |   9  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | CAPS |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |Enter |   4  |   5  |   6  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |   =  |   1  |   2  |   3  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   ~  | Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | RAlt | Ins  |  Del |NumLay|   0  |   .  |  ENT |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT(
+  KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,          KC_MINS,\
+  KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,           KC_BSPC,    KC_P7,   KC_P8,   KC_P9, \
+  KC_CAPS,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    LT_MC(KC_SCLN), CTL_ENT,    KC_P4,   KC_P5,   KC_P6, \
+  KC_LSFT,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,         KC_EQL,    KC_P1,   KC_P2,   KC_P3, \
+  KC_GRV,    KC_RCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_RALT, KC_INS,  KC_DEL,       TG_NUMLAY,    KC_P0,   KC_PDOT, KC_PENT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   ~  |  \   |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | CAPS |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |   [  |   ]  |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT(
+  KC_ESC,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,      KC_NO,      KC_NO,   KC_NO,   KC_NO,   KC_NO, \
+  KC_1,       KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,       KC_8,       KC_9,    KC_0,  KC_GRV, KC_BSLS, _______, _______, _______, \
+  KC_CAPS,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,    KC_UNDS,     KC_EQL, KC_LBRC, KC_RBRC, KC_PIPE, _______, _______, _______, \
+  _______,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______,    _______,    KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______\
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   ~  |  \   |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * |      |   A  |  Up  |   D  | PrSc |      |   4  |   5  |   6  |   *  |   :  |  '   |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  Lt  |  Dn  |  Rt  | Mute |      |   1  |   2  |   3  |  Up  |   /  |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |Space |   0  |      | Left | Down | Right|      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT(
+  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,   KC_F6, KC_F7,   KC_F8,      KC_F9,  KC_F10,   KC_F11,  KC_F12, \
+  KC_1,    KC_2,    KC_3,    KC_4,     KC_5,        KC_6,  KC_7,    KC_8,       KC_9,    KC_0,  KC_PLUS, KC_BSLS, _______, _______, _______, \
+  _______, KC_A,    KC_UP,   KC_D,     KC_PSCR,  _______,  KC_4,    KC_5,       KC_6, KC_PAST,  KC_COLN, KC_QUOT, _______, _______, _______, \
+  _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC__MUTE, _______,  KC_1,    KC_2,       KC_3,   KC_UP,  KC_SLSH, _______, _______, _______, _______, \
+  _______, _______, _______, _______,   _______,  KC_SPC,  KC_0,   _______,  KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______  \
+),
+
+/* FN layer on Esc key
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |   +  |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   =  |   [  |   ]  |  '   |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |   {  |   }  |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_FNLAYER] = LAYOUT(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______,\
+  _______, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC, KC_CIRC,   KC_AMPR,    KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS, _______, _______, _______, \
+  _______,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,     KC_EQL, KC_LBRC, KC_RBRC, KC_QUOT, _______, _______, _______, \
+  _______,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______,   _______,    KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______ \
+),
+
+/* Num Layer
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |  F7  |  F8  |  F9  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |  F4  |  F5  |  F6  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |  Up  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Exit | Left | Down | Rght |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_NUMLAY] = LAYOUT(
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______,\
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_INS,  KC_HOME,  KC_PGUP,   \
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_DEL,   KC_END,  KC_PGDN,   \
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_PMNS,    KC_UP,   KC_PPLS,   \
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT \
+),
+
+/* Mouse Layer (semi-col)
+ * ,-----------------------------------------------------------------------------------.
+ * |      |ACCL0| ACCL1| ACCL2 |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |      |      |      |      | Home | Wh_Up| WHL_L| M_Up | WHL_R|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      | End  | Wh_Dn| M_Lft| M_Dn | M_Rt |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      | BTN2 | BTN3 | BTN4 | BTN5 |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      | BTN1 |      |      |      | BTN1 |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+
+[_MOUSECURSOR] = LAYOUT(
+  _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______,   _______, _______,\
+  _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R, DEMOMACRO, _______, _______, _______, _______, \
+  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R,   _______, _______, _______, _______, _______, \
+  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5,   _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______,   _______, _______, _______, _______, _______ \
+),
+
+/* Adjust (Lower + Raise)
+
+ * ,-----------------------------------------------------------------------------------.
+ * | Reset|      |      |      |      |      |      |      |      | VolD | VolU | Mute |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +|      |      |  Del |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      | BL + |BL ST |BLSTEP| BL TG|      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT(
+  RESET,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, \
+  _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,  KC_DEL, _______, _______, _______, \
+  _______, _______, _______,   AU_ON,  AU_OFF, AG_NORM, AG_SWAP,  QWERTY, _______, _______, _______, _______, _______, _______, _______, \
+  _______,  MUV_DE,  MUV_IN,   MU_ON,  MU_OFF,   MI_ON,  MI_OFF, _______, BL_DEC,  BL_INC,  BL_STEP, BL_TOGG, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+
+};
+
+// define variables for reactive RGB
+bool RGB_INIT = false;
+bool TOG_STATUS = false;
+bool NUMLAY_STATUS = false;
+int RGB_current_mode;
+
+
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    rgblight_mode(RGB_current_mode);
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+          //not sure how to have keyboard check mode and set it to a variable, so my work around
+          //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          rgblight_mode(16);
+        }
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        rgblight_mode(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
+        TOG_STATUS = false;
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        //not sure how to have keyboard check mode and set it to a variable, so my work around
+        //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          rgblight_mode(15);
+        }
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        rgblight_mode(RGB_current_mode);  // revert RGB to initial mode prior to RGB mode change
+        layer_off(_RAISE);
+        TOG_STATUS = false;
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+      //my attempt for RGB layer lock indication via changing the mode, still have to figure out how to not have other keypress not override this mode
+    case TG_NUMLAY:
+      if (record->event.pressed) {
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        NUMLAY_STATUS = !NUMLAY_STATUS;
+        if (NUMLAY_STATUS) {
+        rgblight_mode(4);
+        layer_on(_NUMLAY);
+        } else {
+        rgblight_mode(RGB_current_mode);
+        layer_off(_NUMLAY); }
+      }
+      return false;
+      break;
+    case RGB_MOD:
+      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
+      if (record->event.pressed) {
+        rgblight_mode(RGB_current_mode);
+        rgblight_step();
+        RGB_current_mode = rgblight_config.mode;
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+  #ifdef USE_I2C
+    i2c_master_init();
+  #ifdef SSD1306OLED
+  // calls code for the SSD1306 OLED
+        _delay_ms(400);
+        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
+        iota_gfx_init();   // turns on the display
+  #endif
+  #endif
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+void matrix_scan_user(void) {
+    #ifdef SSD1306OLED
+     iota_gfx_task();  // this is what updates the display continuously
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_SONG(tone_startup);
+}
+
+void shutdown_user()
+{cc
+    PLAY_SONG(tone_goodbye);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_SONG(music_scale);
+}
+
+#endif
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    if (!eeconfig_is_enabled()) {
+      eeconfig_init();
+    }
+
+    switch (id) {
+      case KC_DEMOMACRO:
+        if (record->event.pressed){
+          return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D),  END);
+        }
+    }
+
+    return MACRO_NONE;
+}
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case L_BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case L_RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case L_LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case L_ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}
diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/readme.md b/keyboards/hadron/ver2/keymaps/side_numpad/readme.md
new file mode 100644
index 000000000..de9680b49
--- /dev/null
+++ b/keyboards/hadron/ver2/keymaps/side_numpad/readme.md
@@ -0,0 +1,2 @@
+# The Default Planck Layout
+
diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/rules.mk b/keyboards/hadron/ver2/keymaps/side_numpad/rules.mk
new file mode 100644
index 000000000..687c285bd
--- /dev/null
+++ b/keyboards/hadron/ver2/keymaps/side_numpad/rules.mk
@@ -0,0 +1,26 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/hadron/ver2/rules.mk b/keyboards/hadron/ver2/rules.mk
index 521493b3d..c47bdb1af 100644
--- a/keyboards/hadron/ver2/rules.mk
+++ b/keyboards/hadron/ver2/rules.mk
@@ -1 +1,76 @@
-#AUDIO_ENABLE = yes           # Audio output on port C6
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+BOOTLOADER = halfkay
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = yes
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+
+EXTRAFLAGS += -flto
+
+
+SRC = i2c.c \
+	  ssd1306.c
\ No newline at end of file
diff --git a/keyboards/hadron/ver2/ver2.c b/keyboards/hadron/ver2/ver2.c
index bc0917746..739f06567 100644
--- a/keyboards/hadron/ver2/ver2.c
+++ b/keyboards/hadron/ver2/ver2.c
@@ -1 +1,26 @@
-#include "ver2.h"
\ No newline at end of file
+#include "ver2.h"
+
+
+void matrix_init_kb(void) {
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
\ No newline at end of file
diff --git a/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.c b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.c
new file mode 100644
index 000000000..4331155df
--- /dev/null
+++ b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.c
@@ -0,0 +1,126 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief   SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}
diff --git a/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.h b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.h
new file mode 100644
index 000000000..ec26557f3
--- /dev/null
+++ b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.h
@@ -0,0 +1,1187 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for Clueboard 60% Keyboard
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F303XC
+#define BOARD_NAME                  "Planck PCB"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: LSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                0U
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                8000000U
+#endif
+
+// #define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F303xC
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_PIN0       0U
+#define GPIOA_PIN1       1U
+#define GPIOA_PIN2       2U
+#define GPIOA_PIN3       3U
+#define GPIOA_PIN4       4U
+#define GPIOA_PIN5       5U
+#define GPIOA_PIN6       6U
+#define GPIOA_PIN7       7U
+#define GPIOA_PIN8       8U
+#define GPIOA_PIN9       9U
+#define GPIOA_PIN10      10U
+#define GPIOA_USB_DM     11U
+#define GPIOA_USB_DP     12U
+#define GPIOA_SWDIO      13U
+#define GPIOA_SWCLK      14U
+#define GPIOA_PIN15      15U
+
+#define GPIOB_PIN0       0U
+#define GPIOB_PIN1       1U
+#define GPIOB_PIN2       2U
+#define GPIOB_PIN3       3U
+#define GPIOB_PIN4       4U
+#define GPIOB_PIN5       5U
+#define GPIOB_PIN6       6U
+#define GPIOB_PIN7       7U
+#define GPIOB_PIN8       8U
+#define GPIOB_PIN9       9U
+#define GPIOB_PIN10      10U
+#define GPIOB_PIN11      11U
+#define GPIOB_PIN12      12U
+#define GPIOB_PIN13      13U
+#define GPIOB_PIN14      14U
+#define GPIOB_PIN15      15U
+
+#define GPIOC_PIN0       0U
+#define GPIOC_PIN1       1U
+#define GPIOC_PIN2       2U
+#define GPIOC_PIN3       3U
+#define GPIOC_PIN4       4U
+#define GPIOC_PIN5       5U
+#define GPIOC_PIN6       6U
+#define GPIOC_PIN7       7U
+#define GPIOC_PIN8       8U
+#define GPIOC_PIN9       9U
+#define GPIOC_PIN10      10U
+#define GPIOC_PIN11      11U
+#define GPIOC_PIN12      12U
+#define GPIOC_PIN13      13U
+#define GPIOC_PIN14      14U
+#define GPIOC_PIN15      15U
+
+#define GPIOD_PIN0       0U
+#define GPIOD_PIN1       1U
+#define GPIOD_PIN2       2U
+#define GPIOD_PIN3       3U
+#define GPIOD_PIN4       4U
+#define GPIOD_PIN5       5U
+#define GPIOD_PIN6       6U
+#define GPIOD_PIN7       7U
+#define GPIOD_PIN8       8U
+#define GPIOD_PIN9       9U
+#define GPIOD_PIN10      10U
+#define GPIOD_PIN11      11U
+#define GPIOD_PIN12      12U
+#define GPIOD_PIN13      13U
+#define GPIOD_PIN14      14U
+#define GPIOD_PIN15      15U
+
+#define GPIOE_PIN0       0U
+#define GPIOE_PIN1       1U
+#define GPIOE_PIN2       2U
+#define GPIOE_PIN3       3U
+#define GPIOE_PIN4       4U
+#define GPIOE_PIN5       5U
+#define GPIOE_PIN6       6U
+#define GPIOE_PIN7       7U
+#define GPIOE_PIN8       8U
+#define GPIOE_PIN9       9U
+#define GPIOE_PIN10      10U
+#define GPIOE_PIN11      11U
+#define GPIOE_PIN12      12U
+#define GPIOE_PIN13      13U
+#define GPIOE_PIN14      14U
+#define GPIOE_PIN15      15U
+
+#define GPIOF_I2C2_SDA   0U
+#define GPIOF_I2C2_SCL   1U
+#define GPIOF_PIN2       2U
+#define GPIOF_PIN3       3U
+#define GPIOF_PIN4       4U
+#define GPIOF_PIN5       5U
+#define GPIOF_PIN6       6U
+#define GPIOF_PIN7       7U
+#define GPIOF_PIN8       8U
+#define GPIOF_PIN9       9U
+#define GPIOF_PIN10      10U
+#define GPIOF_PIN11      11U
+#define GPIOF_PIN12      12U
+#define GPIOF_PIN13      13U
+#define GPIOF_PIN14      14U
+#define GPIOF_PIN15      15U
+
+#define GPIOG_PIN0       0U
+#define GPIOG_PIN1       1U
+#define GPIOG_PIN2       2U
+#define GPIOG_PIN3       3U
+#define GPIOG_PIN4       4U
+#define GPIOG_PIN5       5U
+#define GPIOG_PIN6       6U
+#define GPIOG_PIN7       7U
+#define GPIOG_PIN8       8U
+#define GPIOG_PIN9       9U
+#define GPIOG_PIN10      10U
+#define GPIOG_PIN11      11U
+#define GPIOG_PIN12      12U
+#define GPIOG_PIN13      13U
+#define GPIOG_PIN14      14U
+#define GPIOG_PIN15      15U
+
+#define GPIOH_PIN0       0U
+#define GPIOH_PIN1       1U
+#define GPIOH_PIN2       2U
+#define GPIOH_PIN3       3U
+#define GPIOH_PIN4       4U
+#define GPIOH_PIN5       5U
+#define GPIOH_PIN6       6U
+#define GPIOH_PIN7       7U
+#define GPIOH_PIN8       8U
+#define GPIOH_PIN9       9U
+#define GPIOH_PIN10      10U
+#define GPIOH_PIN11      11U
+#define GPIOH_PIN12      12U
+#define GPIOH_PIN13      13U
+#define GPIOH_PIN14      14U
+#define GPIOH_PIN15      15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_L3GD20_SDI             PAL_LINE(GPIOA, 7U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_PIN6               PAL_LINE(GPIOF, 0U)
+#define LINE_PIN7               PAL_LINE(GPIOF, 1U)
+
+#define LINE_CAPS_LOCK               PAL_LINE(GPIOB, 7U)
+
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - NC
+ * PA1  - NC
+ * PA2  - COL1
+ * PA3  - COL2
+ * PA4  - SPEAKER1
+ * PA5  - SPEAKER2
+ * PA6  - COL3
+ * PA7  - COL8
+ * PA8  - COL6
+ * PA9  - COL7
+ * PA10 - ROW5
+ * PA11 - USB_DM                    (alternate 14).
+ * PA12 - USB_DP                    (alternate 14).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - ROW4
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_PIN0) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |   \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |  \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |  \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_ALTERNATE(GPIOA_USB_DM) |     \
+                                     PIN_MODE_ALTERNATE(GPIOA_USB_DP) |     \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_PIN0) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_HIGH(GPIOA_USB_DM) |        \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_PIN0) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |   \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |    \
+                                     PIN_PUPDR_FLOATING(GPIOA_PIN7) |  \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_PIN0) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |         \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |        \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |        \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_PIN0, 0) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 1) |           \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0) |           \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0) |           \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0) |           \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 5) |       \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 5) |      \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 5))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0) |           \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0) |           \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0) |          \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 14) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 14) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0) |          \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                       (alternate 0).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6 LSM303DLHC_SCL   (alternate 4).
+ * PB7  - PIN7 LSM303DLHC_SDA   (alternate 4).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - PIN13                     (input pullup).
+ * PB14 - PIN14                     (input pullup).
+ * PB15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_ALTERNATE(GPIOB_PIN3) |        \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_ALTERNATE(GPIOB_PIN6) |   \
+                                     PIN_MODE_OUTPUT(GPIOB_PIN7) |   \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN15))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |        \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN2) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |           \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN6) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN15))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_FLOATING(GPIOB_PIN3) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOB_PIN6) |   \
+                                     PIN_PUPDR_PULLDOWN(GPIOB_PIN7) |   \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN15))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |              \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |         \
+                                     PIN_ODR_LOW(GPIOB_PIN7) |         \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN15))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0) |           \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0) |           \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0) |           \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0) |            \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0) |           \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0) |           \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 4) |       \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0) |           \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0) |           \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN13, 0) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN14, 0) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN15, 0))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - PIN0                      (input pullup).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - PIN6                      (input pullup).
+ * PC7  - PIN7                      (input pullup).
+ * PC8  - PIN8                      (input pullup).
+ * PC9  - PIN9                      (input pullup).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - PIN14                  (input floating).
+ * PC15 - PIN15                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_INPUT(GPIOC_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN14) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN15))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN14) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOC_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_PIN14) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_PULLUP(GPIOC_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_PIN14) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_PIN15))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN14) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_PIN0, 0) |           \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0) |           \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0) |           \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0) |           \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0) |           \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0) |           \
+                                     PIN_AFIO_AF(GPIOC_PIN6, 0) |           \
+                                     PIN_AFIO_AF(GPIOC_PIN7, 0))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_PIN8, 0) |           \
+                                     PIN_AFIO_AF(GPIOC_PIN9, 0) |           \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN14, 0) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN15, 0))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD11 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0) |           \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0) |           \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0) |           \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0) |           \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0) |           \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0) |           \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0) |           \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0) |           \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0) |           \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0               (input pullup).
+ * PE1  - PIN1               (input pullup).
+ * PE2  - PIN2           (input pullup).
+ * PE3  - PIN3 L3GD20_CS         (output pushpull maximum).
+ * PE4  - PIN4           (input pullup).
+ * PE5  - PIN5           (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                 (output pushpull maximum).
+ * PE9  - PIN9                  (output pushpull maximum).
+ * PE10 - PIN10               (output pushpull maximum).
+ * PE11 - PIN11                (output pushpull maximum).
+ * PE12 - PIN12                 (output pushpull maximum).
+ * PE13 - PIN13                 (output pushpull maximum).
+ * PE14 - PIN14               (output pushpull maximum).
+ * PE15 - PIN15                (output pushpull maximum).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |    \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |    \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |\
+                                     PIN_MODE_OUTPUT(GPIOE_PIN3) |       \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |\
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |\
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_OUTPUT(GPIOE_PIN8) |     \
+                                     PIN_MODE_OUTPUT(GPIOE_PIN9) |      \
+                                     PIN_MODE_OUTPUT(GPIOE_PIN10) |   \
+                                     PIN_MODE_OUTPUT(GPIOE_PIN11) |    \
+                                     PIN_MODE_OUTPUT(GPIOE_PIN12) |     \
+                                     PIN_MODE_OUTPUT(GPIOE_PIN13) |     \
+                                     PIN_MODE_OUTPUT(GPIOE_PIN14) |   \
+                                     PIN_MODE_OUTPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\
+                                     PIN_OSPEED_HIGH(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_HIGH(GPIOE_PIN8) |     \
+                                     PIN_OSPEED_HIGH(GPIOE_PIN9) |      \
+                                     PIN_OSPEED_HIGH(GPIOE_PIN10) |   \
+                                     PIN_OSPEED_HIGH(GPIOE_PIN11) |    \
+                                     PIN_OSPEED_HIGH(GPIOE_PIN12) |     \
+                                     PIN_OSPEED_HIGH(GPIOE_PIN13) |     \
+                                     PIN_OSPEED_HIGH(GPIOE_PIN14) |   \
+                                     PIN_OSPEED_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |  \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |  \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |\
+                                     PIN_PUPDR_FLOATING(GPIOE_PIN3) |    \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |\
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |\
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |    \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |     \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |  \
+                                     PIN_PUPDR_FLOATING(GPIOE_PIN11) | \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |    \
+                                     PIN_PUPDR_FLOATING(GPIOE_PIN13) |  \
+                                     PIN_PUPDR_FLOATING(GPIOE_PIN14) |\
+                                     PIN_PUPDR_FLOATING(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |      \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |      \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |  \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |          \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |  \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |  \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_LOW(GPIOE_PIN8) |         \
+                                     PIN_ODR_LOW(GPIOE_PIN9) |          \
+                                     PIN_ODR_LOW(GPIOE_PIN10) |       \
+                                     PIN_ODR_LOW(GPIOE_PIN11) |        \
+                                     PIN_ODR_LOW(GPIOE_PIN12) |         \
+                                     PIN_ODR_LOW(GPIOE_PIN13) |         \
+                                     PIN_ODR_LOW(GPIOE_PIN14) |       \
+                                     PIN_ODR_LOW(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0) |    \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0) |    \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0) |\
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0) |        \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0) |\
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0) |\
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0) |           \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0) |      \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0) |       \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0) |    \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0) |     \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0) |      \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0) |      \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0) |    \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - I2C2_SDA                    (input floating).
+ * PF1  - I2C2_SCL                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_I2C2_SDA) |         \
+                                     PIN_MODE_INPUT(GPIOF_I2C2_SCL) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) |        \
+                                     PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_I2C2_SDA) |           \
+                                     PIN_ODR_HIGH(GPIOF_I2C2_SCL) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) |         \
+                                     PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) |        \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0) |           \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0) |           \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0) |           \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0) |           \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0) |           \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0) |           \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0) |           \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0))
+
+/*
+ * GPIOG setup:
+ *
+ * PG0  - PIN0                      (input pullup).
+ * PG1  - PIN1                      (input pullup).
+ * PG2  - PIN2                      (input pullup).
+ * PG3  - PIN3                      (input pullup).
+ * PG4  - PIN4                      (input pullup).
+ * PG5  - PIN5                      (input pullup).
+ * PG6  - PIN6                      (input pullup).
+ * PG7  - PIN7                      (input pullup).
+ * PG8  - PIN8                      (input pullup).
+ * PG9  - PIN9                      (input pullup).
+ * PG10 - PIN10                     (input pullup).
+ * PG11 - PIN11                     (input pullup).
+ * PG12 - PIN12                     (input pullup).
+ * PG13 - PIN13                     (input pullup).
+ * PG14 - PIN14                     (input pullup).
+ * PG15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOG_MODER             (PIN_MODE_INPUT(GPIOG_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOG_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOG_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOG_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOG_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOG_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOG_PIN15))
+#define VAL_GPIOG_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
+#define VAL_GPIOG_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOG_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOG_PIN15))
+#define VAL_GPIOG_PUPDR             (PIN_PUPDR_PULLUP(GPIOG_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOG_PIN15))
+#define VAL_GPIOG_ODR               (PIN_ODR_HIGH(GPIOG_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOG_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOG_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOG_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOG_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOG_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOG_PIN15))
+#define VAL_GPIOG_AFRL              (PIN_AFIO_AF(GPIOG_PIN0, 0) |           \
+                                     PIN_AFIO_AF(GPIOG_PIN1, 0) |           \
+                                     PIN_AFIO_AF(GPIOG_PIN2, 0) |           \
+                                     PIN_AFIO_AF(GPIOG_PIN3, 0) |           \
+                                     PIN_AFIO_AF(GPIOG_PIN4, 0) |           \
+                                     PIN_AFIO_AF(GPIOG_PIN5, 0) |           \
+                                     PIN_AFIO_AF(GPIOG_PIN6, 0) |           \
+                                     PIN_AFIO_AF(GPIOG_PIN7, 0))
+#define VAL_GPIOG_AFRH              (PIN_AFIO_AF(GPIOG_PIN8, 0) |           \
+                                     PIN_AFIO_AF(GPIOG_PIN9, 0) |           \
+                                     PIN_AFIO_AF(GPIOG_PIN10, 0) |          \
+                                     PIN_AFIO_AF(GPIOG_PIN11, 0) |          \
+                                     PIN_AFIO_AF(GPIOG_PIN12, 0) |          \
+                                     PIN_AFIO_AF(GPIOG_PIN13, 0) |          \
+                                     PIN_AFIO_AF(GPIOG_PIN14, 0) |          \
+                                     PIN_AFIO_AF(GPIOG_PIN15, 0))
+
+/*
+ * GPIOH setup:
+ *
+ * PH0  - PIN0                      (input pullup).
+ * PH1  - PIN1                      (input pullup).
+ * PH2  - PIN2                      (input pullup).
+ * PH3  - PIN3                      (input pullup).
+ * PH4  - PIN4                      (input pullup).
+ * PH5  - PIN5                      (input pullup).
+ * PH6  - PIN6                      (input pullup).
+ * PH7  - PIN7                      (input pullup).
+ * PH8  - PIN8                      (input pullup).
+ * PH9  - PIN9                      (input pullup).
+ * PH10 - PIN10                     (input pullup).
+ * PH11 - PIN11                     (input pullup).
+ * PH12 - PIN12                     (input pullup).
+ * PH13 - PIN13                     (input pullup).
+ * PH14 - PIN14                     (input pullup).
+ * PH15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOH_MODER             (PIN_MODE_INPUT(GPIOH_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOH_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOH_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOH_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOH_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOH_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOH_PIN15))
+#define VAL_GPIOH_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
+#define VAL_GPIOH_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOH_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOH_PIN15))
+#define VAL_GPIOH_PUPDR             (PIN_PUPDR_PULLUP(GPIOH_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOH_PIN15))
+#define VAL_GPIOH_ODR               (PIN_ODR_HIGH(GPIOH_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOH_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOH_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOH_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOH_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOH_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOH_PIN15))
+#define VAL_GPIOH_AFRL              (PIN_AFIO_AF(GPIOH_PIN0, 0) |           \
+                                     PIN_AFIO_AF(GPIOH_PIN1, 0) |           \
+                                     PIN_AFIO_AF(GPIOH_PIN2, 0) |           \
+                                     PIN_AFIO_AF(GPIOH_PIN3, 0) |           \
+                                     PIN_AFIO_AF(GPIOH_PIN4, 0) |           \
+                                     PIN_AFIO_AF(GPIOH_PIN5, 0) |           \
+                                     PIN_AFIO_AF(GPIOH_PIN6, 0) |           \
+                                     PIN_AFIO_AF(GPIOH_PIN7, 0))
+#define VAL_GPIOH_AFRH              (PIN_AFIO_AF(GPIOH_PIN8, 0) |           \
+                                     PIN_AFIO_AF(GPIOH_PIN9, 0) |           \
+                                     PIN_AFIO_AF(GPIOH_PIN10, 0) |          \
+                                     PIN_AFIO_AF(GPIOH_PIN11, 0) |          \
+                                     PIN_AFIO_AF(GPIOH_PIN12, 0) |          \
+                                     PIN_AFIO_AF(GPIOH_PIN13, 0) |          \
+                                     PIN_AFIO_AF(GPIOH_PIN14, 0) |          \
+                                     PIN_AFIO_AF(GPIOH_PIN15, 0))
+
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+// #define usb_lld_connect_bus(usbp)
+#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)))
+// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT)
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+// #define usb_lld_disconnect_bus(usbp)
+#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP)
+// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12)
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.mk b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.mk
new file mode 100644
index 000000000..43377629a
--- /dev/null
+++ b/keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC
diff --git a/keyboards/hadron/ver3/bootloader_defs.h b/keyboards/hadron/ver3/bootloader_defs.h
new file mode 100644
index 000000000..3b0e9d20a
--- /dev/null
+++ b/keyboards/hadron/ver3/bootloader_defs.h
@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
diff --git a/keyboards/hadron/ver3/chconf.h b/keyboards/hadron/ver3/chconf.h
new file mode 100644
index 000000000..1d9f12ff1
--- /dev/null
+++ b/keyboards/hadron/ver3/chconf.h
@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/hadron/ver3/config.h b/keyboards/hadron/ver3/config.h
new file mode 100644
index 000000000..11288f7a5
--- /dev/null
+++ b/keyboards/hadron/ver3/config.h
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef REV3_CONFIG_H
+#define REV3_CONFIG_H
+
+/* USB Device descriptor parameter */
+#define DEVICE_VER 0x0003
+
+#undef MATRIX_ROWS
+#undef MATRIX_COLS
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+
+//Audio
+#undef AUDIO_VOICES
+#undef C6_AUDIO
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#define AUDIO_CLICKY
+  /* to enable clicky on startup */
+  //#define AUDIO_CLICKY_ON
+#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
+#endif
+
+//configure qwiic micro_oled driver for the 128x32 oled
+#ifdef QWIIC_MICRO_OLED_ENABLE
+
+#undef I2C_ADDRESS_SA0_1
+#define I2C_ADDRESS_SA0_1 0b0111100
+#define LCDWIDTH      128
+#define LCDHEIGHT     32
+#define micro_oled_rotate_180
+
+#endif
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+/* Haptic Driver initialization settings
+ * Feedback Control Settings */
+#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
+#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+#define RATED_VOLTAGE 2
+#define V_RMS 2.0
+#define V_PEAK 2.85
+#define F_LRA 205
+/* Library Selection */
+#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+
+/* Control 1 register settings */
+#define DRIVE_TIME 25
+#define AC_COUPLE 0
+#define STARTUP_BOOST 1
+
+/* Control 2 Settings */
+#define BIDIR_INPUT 1
+#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
+#define SAMPLE_TIME 3
+#define BLANKING_TIME 1
+#define IDISS_TIME 1
+
+/* Control 3 settings */
+#define NG_THRESH 2
+#define ERM_OPEN_LOOP 1
+#define SUPPLY_COMP_DIS 0
+#define DATA_FORMAT_RTO 0
+#define LRA_DRIVE_MODE 0
+#define N_PWM_ANALOG 0
+#define LRA_OPEN_LOOP 0
+/* Control 4 settings */
+#define ZC_DET_TIME 0
+#define AUTO_CAL_TIME 3
+
+//#define WS2812_LED_N 2
+//#define RGBLED_NUM WS2812_LED_N
+//#define WS2812_TIM_N 2
+//#define WS2812_TIM_CH 2
+//#define PORT_WS2812     GPIOA
+//#define PIN_WS2812      15
+//#define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP
+
+#endif
diff --git a/keyboards/hadron/ver3/halconf.h b/keyboards/hadron/ver3/halconf.h
new file mode 100644
index 000000000..c3e0cbb72
--- /dev/null
+++ b/keyboards/hadron/ver3/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/keyboards/hadron/ver3/keymaps/default/config.h b/keyboards/hadron/ver3/keymaps/default/config.h
new file mode 100644
index 000000000..6f70f09be
--- /dev/null
+++ b/keyboards/hadron/ver3/keymaps/default/config.h
@@ -0,0 +1 @@
+#pragma once
diff --git a/keyboards/hadron/ver3/keymaps/default/keymap.c b/keyboards/hadron/ver3/keymaps/default/keymap.c
new file mode 100644
index 000000000..11761b321
--- /dev/null
+++ b/keyboards/hadron/ver3/keymaps/default/keymap.c
@@ -0,0 +1,295 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _MOUSECURSOR 8
+#define _ADJUST 16
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  RGBLED_TOGGLE,
+  RGBLED_STEP_MODE,
+  RGBLED_INCREASE_HUE,
+  RGBLED_DECREASE_HUE,
+  RGBLED_INCREASE_SAT,
+  RGBLED_DECREASE_SAT,
+  RGBLED_INCREASE_VAL,
+  RGBLED_DECREASE_VAL,
+};
+
+enum macro_keycodes {
+  KC_DEMOMACRO,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
+#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
+#define DEMOMACRO   M(KC_DEMOMACRO)            // Sample for macros
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,------+------+------+------+------+------------------------------------------------.
+ * | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  DEL |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   7  |   8  |   9  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | CAPS |   A  |   S  |   D  |   F  |   G  |   4  |   5  |   6  |   H  |   J  |   K  |   L  | ;/Nav|  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   1  |   2  |   3  |   N  |   M  |   ,  |   .  |   /  |Ctl/Et|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |  `   | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT(
+  KC_ESC,   KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10,  KC_DEL,\
+  KC_TAB,   KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_P7,   KC_P8,   KC_P9,    KC_Y,    KC_U,    KC_I,   KC_O,    KC_P,     KC_BSPC, \
+  KC_CAPS,  KC_A,     KC_S,    KC_D,    KC_F,    KC_G,    KC_P4,   KC_P5,   KC_P6,    KC_H,    KC_J,    KC_K,   KC_L,LT_MC(KC_SCLN), KC_QUOT, \
+  KC_LSFT,  KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_P1,   KC_P2,   KC_P3,    KC_N,    KC_M,    KC_COMM,KC_DOT,  KC_SLSH,  CTL_ENT, \
+  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,  KC_SPC,   RAISE,   KC_LEFT,KC_DOWN, KC_UP,    KC_RGHT  \
+),
+
+/* Colemak
+ * ,------+------+------+------+------+------------------------------------------------.
+ * | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   7  |   8  |   9  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | CAPS |   A  |   R  |   S  |   T  |   D  |   4  |   5  |   6  |   H  |   N  |   E  |   I  |   O  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   1  |   2  |   3  |   K  |   M  |   ,  |   .  |   /  |Ctl/Et|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT(
+  KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10, KC_DEL,\
+  KC_TAB,   KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_P7,   KC_P8,   KC_P9,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN,  KC_BSPC, \
+  KC_LCTRL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_P4,   KC_P5,   KC_P6,    KC_H,    KC_N,    KC_E,    KC_I, LT_MC(KC_O), KC_QUOT, \
+  KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_P1,   KC_P2,   KC_P3,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  CTL_ENT, \
+  KC_GRV,   KC_CAPS, KC_LGUI, KC_LALT, LOWER,  KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,   KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,    KC_RGHT  \
+  ),
+
+/* Dvorak
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   7  |   8  |   9  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   4  |   5  |   6  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   1  |   2  |   3  |   B  |   M  |   W  |   V  |   Z  |Ctl/Et|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT(
+  KC_ESC,   KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10, KC_DEL,\
+  KC_TAB,   KC_QUOT,  KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_P7,   KC_P8,   KC_P9,    KC_F,    KC_G,   KC_C,    KC_R,    KC_L,     KC_BSPC, \
+  KC_LCTL,  KC_A,     KC_O,    KC_E,    KC_U,    KC_I,    KC_P4,   KC_P5,   KC_P6,    KC_D,    KC_H,   KC_T,    KC_N, LT_MC(KC_S), KC_SLSH, \
+  KC_LSFT,  KC_SCLN,  KC_Q,    KC_J,    KC_K,    KC_X,    KC_P1,   KC_P2,   KC_P3,    KC_B,    KC_M,   KC_W,    KC_V,    KC_Z,     CTL_ENT, \
+  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,   KC_SPC,  RAISE,  KC_LEFT, KC_DOWN, KC_UP,    KC_RGHT \
+),
+
+/* Lower
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |      |      |      |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 |ISO ~ |ISO | |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR,  KC_LPRN, KC_RPRN, KC_DEL, \
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_UNDS, KC_PLUS,  KC_LBRC, KC_RBRC, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |      |      |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 |ISO # |ISO / |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______,  _______, KC_SPC, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY   \
+),
+
+/* Mouse Layer (semi-col)
+ * ,------+------+------+------+------+------------------------------------------------.
+ * | ACCL0| ACCL1| ACCL2|      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |      |      |      |      |      |      |      | Home | Wh_Up| WHL_L| M_Up | WHL_R| Macro|      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | End  | Wh_Dn| M_Lft| M_Dn | M_Rt |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      | BTN2 | BTN3 | BTN4 | BTN5 |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      | BTN1 |      |      |      | BTN1 |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+
+[_MOUSECURSOR] = LAYOUT(
+  KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R,DEMOMACRO,_______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, \
+  _______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______  \
+),
+
+/* Adjust (Lower + Raise)
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +|      |      |      |      |      |  Del |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|      |      |      |AGswap|Qwerty|Colemk|      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|      |      |      |      |      |      |      | BL + |BL ST |BL TG |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT(
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+  RESET,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, _______, _______, _______, AG_SWAP, QWERTY,  COLEMAK, _______,  _______,  _______, \
+  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF, _______, _______, _______,  _______, BL_DEC,  BL_INC,  BL_STEP, BL_TOGG, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CK_RST,  CK_DOWN, CK_UP,   CK_TOGG\
+)
+
+
+
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+          //not sure how to have keyboard check mode and set it to a variable, so my work around
+          //uses another variable that would be set to true after the first time a reactive key is pressed.
+        layer_on(_LOWER);
+      } else {
+        layer_off(_LOWER);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        //not sure how to have keyboard check mode and set it to a variable, so my work around
+        //uses another variable that would be set to true after the first time a reactive key is pressed.
+        layer_on(_RAISE);
+      } else {
+        layer_off(_RAISE);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}
+
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    if (!eeconfig_is_enabled()) {
+      eeconfig_init();
+    }
+
+    switch (id) {
+      case KC_DEMOMACRO:
+        if (record->event.pressed){
+          return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D),  END);
+        }
+    }
+
+    return MACRO_NONE;
+}
+
+
+void matrix_init_user(void) {
+}
+
+
+void matrix_scan_user(void) {
+}
+
diff --git a/keyboards/hadron/ver3/keymaps/default/readme.md b/keyboards/hadron/ver3/keymaps/default/readme.md
new file mode 100644
index 000000000..88b958ec4
--- /dev/null
+++ b/keyboards/hadron/ver3/keymaps/default/readme.md
@@ -0,0 +1,2 @@
+# The Default Hadron Layout
+
diff --git a/keyboards/hadron/ver3/keymaps/readme.md b/keyboards/hadron/ver3/keymaps/readme.md
new file mode 100644
index 000000000..54fb5f6d9
--- /dev/null
+++ b/keyboards/hadron/ver3/keymaps/readme.md
@@ -0,0 +1,23 @@
+# How to add your own keymap
+
+Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
+
+    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
+
+\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
+
+and contain the following files:
+
+* `keymap.c`
+* `readme.md` *recommended*
+* `config.h` *optional*, found automatically when compiling
+* `Makefile` *optional*, found automatically when compling
+
+When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
+
+     * **folder_name** description
+
+# List of Planck keymaps
+
+* **default** default Planck layout
+* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file
diff --git a/keyboards/hadron/ver3/matrix.c b/keyboards/hadron/ver3/matrix.c
new file mode 100644
index 000000000..329d1328a
--- /dev/null
+++ b/keyboards/hadron/ver3/matrix.c
@@ -0,0 +1,195 @@
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "printf.h"
+#include "backlight.h"
+#include "matrix.h"
+#include "action.h"
+#include "keycode.h"
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_COLS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+static uint8_t encoder_state = 0;
+static int8_t encoder_value = 0;
+static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 };
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+  matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+  matrix_scan_user();
+}
+
+void matrix_init(void) {
+    printf("matrix init\n");
+    //debug_matrix = true;
+
+    // encoder setup
+    palSetPadMode(GPIOB, 13, PAL_MODE_INPUT_PULLUP);
+    palSetPadMode(GPIOB, 14, PAL_MODE_INPUT_PULLUP);
+
+    encoder_state = (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1);
+
+    // actual matrix setup
+    palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 10,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOA, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOA, 1,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOA, 2,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOA, 3, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 1,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOA, 6,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOA, 7,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 12,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 13,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 11,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 9,  PAL_MODE_OUTPUT_PUSHPULL);
+
+    palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOC, 14,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 10,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLDOWN);
+
+
+    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t));
+
+
+    matrix_init_quantum();
+}
+
+__attribute__ ((weak))
+void encoder_update(bool clockwise) { }
+
+#ifndef ENCODER_RESOLUTION
+  #define ENCODER_RESOLUTION 4
+#endif
+
+uint8_t matrix_scan(void) {
+    // encoder on B13 and B14
+    encoder_state <<= 2;
+    encoder_state |= (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1);
+    encoder_value += encoder_LUT[encoder_state & 0xF];
+    if (encoder_value >= ENCODER_RESOLUTION) {
+        encoder_update(0);
+    }
+    if (encoder_value <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise
+        encoder_update(1);
+    }
+    encoder_value %= ENCODER_RESOLUTION;
+
+    // actual matrix
+    for (int col = 0; col < MATRIX_COLS; col++) {
+        matrix_row_t data = 0;
+
+        // strobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11,  }
+        switch (col) {
+            case 0:  palSetPad(GPIOB, 8); break;
+            case 1:  palSetPad(GPIOB, 2); break;
+            case 2:  palSetPad(GPIOB, 10); break;
+            case 3:  palSetPad(GPIOA, 0); break;
+            case 4:  palSetPad(GPIOA, 1); break;
+            case 5:  palSetPad(GPIOA, 2); break;
+            case 6:  palSetPad(GPIOB, 0); break;
+            case 7:  palSetPad(GPIOA, 3); break;
+            case 8:  palSetPad(GPIOB, 1); break;
+            case 9:  palSetPad(GPIOA, 6); break;
+            case 10: palSetPad(GPIOA, 7); break;
+            case 11: palSetPad(GPIOB, 12); break;
+            case 12: palSetPad(GPIOC, 13); break;
+            case 13: palSetPad(GPIOB, 11); break;
+            case 14: palSetPad(GPIOB, 9); break;
+        }
+
+        // need wait to settle pin state
+        wait_us(20);
+
+        // read row data { PC15, PC14, PA10, PA9, PA8 }
+        data = (
+            (palReadPad(GPIOC, 15)  << 0 ) |
+            (palReadPad(GPIOC, 14)  << 1 ) |
+            (palReadPad(GPIOA, 10)  << 2 ) |
+            (palReadPad(GPIOA, 9)   << 3 ) |
+            (palReadPad(GPIOA, 8)   << 4 )
+        );
+
+        // unstrobe  col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11,  }
+        switch (col) {
+            case 0:  palClearPad(GPIOB, 8); break;
+            case 1:  palClearPad(GPIOB, 2); break;
+            case 2:  palClearPad(GPIOB, 10); break;
+            case 3:  palClearPad(GPIOA, 0); break;
+            case 4:  palClearPad(GPIOA, 1); break;
+            case 5:  palClearPad(GPIOA, 2); break;
+            case 6:  palClearPad(GPIOB, 0); break;
+            case 7:  palClearPad(GPIOA, 3); break;
+            case 8:  palClearPad(GPIOB, 1); break;
+            case 9:  palClearPad(GPIOA, 6); break;
+            case 10: palClearPad(GPIOA, 7); break;
+            case 11: palClearPad(GPIOB, 12); break;
+            case 12: palClearPad(GPIOC, 13); break;
+            case 13: palClearPad(GPIOB, 11); break;
+            case 14: palClearPad(GPIOB, 9); break;
+        }
+
+        if (matrix_debouncing[col] != data) {
+            matrix_debouncing[col] = data;
+            debouncing = true;
+            debouncing_time = timer_read();
+        }
+    }
+
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            matrix[row] = 0;
+            for (int col = 0; col < MATRIX_COLS; col++) {
+                matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col);
+            }
+        }
+        debouncing = false;
+    }
+
+    matrix_scan_quantum();
+
+    return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col) {
+    return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+    printf("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        printf("%X0: ", row);
+        matrix_row_t data = matrix_get_row(row);
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (data & (1<<col))
+                printf("1");
+            else
+                printf("0");
+        }
+        printf("\n");
+    }
+}
diff --git a/keyboards/hadron/ver3/mcuconf.h b/keyboards/hadron/ver3/mcuconf.h
new file mode 100644
index 000000000..36f8ca225
--- /dev/null
+++ b/keyboards/hadron/ver3/mcuconf.h
@@ -0,0 +1,257 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  TRUE
+#define STM32_GPT_USE_TIM7                  TRUE
+#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  TRUE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */
diff --git a/keyboards/hadron/ver3/rev3.h b/keyboards/hadron/ver3/rev3.h
new file mode 100644
index 000000000..2cbd53ace
--- /dev/null
+++ b/keyboards/hadron/ver3/rev3.h
@@ -0,0 +1,21 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef REV3_H
+#define REV3_H
+
+#include "hadron.h"
+
+#endif
\ No newline at end of file
diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk
new file mode 100644
index 000000000..8375efdd3
--- /dev/null
+++ b/keyboards/hadron/ver3/rules.mk
@@ -0,0 +1,57 @@
+# project specific files
+SRC =	matrix.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = no	# Console for debug
+COMMAND_ENABLE = no    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = no
+HAPTIC_ENABLE = DRV2605L
+QWIIC_ENABLE += MICRO_OLED
+# SERIAL_LINK_ENABLE = yes
diff --git a/keyboards/hadron/ver3/ver3.c b/keyboards/hadron/ver3/ver3.c
new file mode 100644
index 000000000..5e5e3e009
--- /dev/null
+++ b/keyboards/hadron/ver3/ver3.c
@@ -0,0 +1,196 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "ver3.h"
+#include "qwiic.h"
+#include "action_layer.h"
+#include "matrix.h"
+#include "DRV2605L.h"
+
+#ifdef QWIIC_MICRO_OLED_ENABLE
+
+/* screen off after this many milliseconds */
+#include "timer.h"
+#define ScreenOffInterval 60000 /* milliseconds */
+static uint16_t last_flush;
+
+volatile uint8_t led_numlock = false; 
+volatile uint8_t  led_capslock = false; 
+volatile uint8_t  led_scrolllock = false;
+
+static uint8_t layer;
+static bool queue_for_send = false; 
+static uint8_t encoder_value = 32;
+
+__attribute__ ((weak))
+void draw_ui(void) {
+  clear_buffer();
+  last_flush = timer_read();
+  send_command(DISPLAYON);
+
+/* Layer indicator is 41 x 10 pixels */
+#define LAYER_INDICATOR_X 0
+#define LAYER_INDICATOR_Y 0 
+
+  draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0);
+  draw_rect_filled_soft(LAYER_INDICATOR_X + 32, LAYER_INDICATOR_Y + 1, 9, 9, PIXEL_ON, NORM);
+  draw_char(LAYER_INDICATOR_X + 34, LAYER_INDICATOR_Y + 2, layer + 0x30, PIXEL_ON, XOR, 0);
+
+/* Matrix display is 19 x 9 pixels */
+#define MATRIX_DISPLAY_X 0
+#define MATRIX_DISPLAY_Y 18
+
+  for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+    for (uint8_t y = 0; y < MATRIX_COLS; y++) {
+      draw_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM);
+    }
+  } 
+  draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 19, 9, PIXEL_ON, NORM);
+  /* hadron oled location on thumbnail */
+  draw_rect_filled_soft(MATRIX_DISPLAY_X + 14, MATRIX_DISPLAY_Y + 2, 3, 1, PIXEL_ON, NORM);
+/*
+  draw_rect_soft(0, 13, 64, 6, PIXEL_ON, NORM);
+  draw_line_vert(encoder_value, 13, 6, PIXEL_ON, NORM);
+
+*/
+
+/* Mod display is 41 x 16 pixels */
+#define MOD_DISPLAY_X 30
+#define MOD_DISPLAY_Y 18
+
+  uint8_t mods = get_mods();
+  if (mods & MOD_LSFT) {
+    draw_rect_filled_soft(MOD_DISPLAY_X + 0, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
+    draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_OFF, NORM, 0);
+  } else {
+    draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_ON, NORM, 0);
+  }
+  if (mods & MOD_LCTL) {
+    draw_rect_filled_soft(MOD_DISPLAY_X + 10, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
+    draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_OFF, NORM, 0);
+  } else {
+    draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_ON, NORM, 0);
+  }
+  if (mods & MOD_LALT) {
+    draw_rect_filled_soft(MOD_DISPLAY_X + 20, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
+    draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_OFF, NORM, 0);
+  } else {
+    draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_ON, NORM, 0);
+  }
+  if (mods & MOD_LGUI) {
+    draw_rect_filled_soft(MOD_DISPLAY_X + 30, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
+    draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_OFF, NORM, 0);
+  } else {
+    draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_ON, NORM, 0);
+  }
+
+/* Lock display is 23 x 32 */
+#define LOCK_DISPLAY_X 100
+#define LOCK_DISPLAY_Y 0
+
+  if (led_numlock == true) {
+    draw_rect_filled_soft(LOCK_DISPLAY_X, LOCK_DISPLAY_Y, 5 + (3 * 6), 9, PIXEL_ON, NORM);
+    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_OFF, NORM, 0);
+  } else if (led_numlock == false) {
+    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_ON, NORM, 0);
+  }
+  if (led_capslock == true) {
+    draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 11, 5 + (3 * 6), 9, PIXEL_ON, NORM);
+    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_OFF, NORM, 0);
+  } else if (led_capslock == false) {
+    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_ON, NORM, 0);
+  }
+
+  if (led_scrolllock == true) {
+    draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 22, 5 + (3 * 6), 9, PIXEL_ON, NORM);
+    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_OFF, NORM, 0);
+  } else if (led_scrolllock == false) {
+    draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_ON, NORM, 0);
+  }
+  send_buffer();
+}
+
+void read_host_led_state(void) {
+  uint8_t leds = host_keyboard_leds();
+  if (leds & (1 << USB_LED_NUM_LOCK))    {
+    if (led_numlock == false){
+    led_numlock = true;}
+    } else {
+    if (led_numlock == true){
+    led_numlock = false;}
+    }
+  if (leds & (1 << USB_LED_CAPS_LOCK))   {
+    if (led_capslock == false){
+    led_capslock = true;}
+    } else {
+    if (led_capslock == true){  
+    led_capslock = false;}
+    }
+  if (leds & (1 << USB_LED_SCROLL_LOCK)) {
+    if (led_scrolllock == false){
+    led_scrolllock = true;}
+    } else {
+    if (led_scrolllock == true){
+    led_scrolllock = false;}
+    }
+}
+
+uint32_t layer_state_set_kb(uint32_t state) {
+  state = layer_state_set_user(state);
+  layer = biton32(state);
+  queue_for_send = true;
+  return state;
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  queue_for_send = true;
+  return process_record_user(keycode, record);
+}
+
+void encoder_update_kb(uint8_t index, bool clockwise) {
+  encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64;
+  queue_for_send = true;
+}
+
+#endif
+
+void matrix_init_kb(void) {
+#ifdef DRV2605L
+  DRV_init();
+#endif
+  queue_for_send = true;
+	matrix_init_user();
+}
+            
+void matrix_scan_kb(void) {
+
+if (queue_for_send) {
+  #ifdef DRV2605L
+    DRV_EFFECT play_eff = strong_click; 
+    DRV_pulse(play_eff);
+  #endif
+#ifdef QWIIC_MICRO_OLED_ENABLE
+   read_host_led_state();
+   draw_ui();
+#endif
+   queue_for_send = false;
+  }
+#ifdef QWIIC_MICRO_OLED_ENABLE
+  if (timer_elapsed(last_flush) > ScreenOffInterval) {
+  send_command(DISPLAYOFF);      /* 0xAE */
+  }
+#endif
+	matrix_scan_user();
+}
diff --git a/keyboards/hadron/ver3/ver3.h b/keyboards/hadron/ver3/ver3.h
new file mode 100644
index 000000000..516f7b9a1
--- /dev/null
+++ b/keyboards/hadron/ver3/ver3.h
@@ -0,0 +1,21 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef VER3_H
+#define VER3_H
+
+#include "hadron.h"
+
+#endif
\ No newline at end of file
diff --git a/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk b/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk
deleted file mode 100644
index c56d6f37e..000000000
--- a/keyboards/helix/rev1/keymaps/OLED_sample/rules.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no        # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/tmk_core/common/action_layer.h b/tmk_core/common/action_layer.h
index 6d48321f9..f1551d251 100644
--- a/tmk_core/common/action_layer.h
+++ b/tmk_core/common/action_layer.h
@@ -82,12 +82,10 @@ void layer_xor(uint32_t state);
 #define layer_or(state)
 #define layer_and(state)
 #define layer_xor(state)
+#endif
 
-__attribute__((weak))
 uint32_t layer_state_set_user(uint32_t state);
-__attribute__((weak))
 uint32_t layer_state_set_kb(uint32_t state);
-#endif
 
 /* pressed actions cache */
 #if !defined(NO_ACTION_LAYER) && !defined(STRICT_LAYER_RELEASE)
diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c
index a6a5fb56b..6f659b244 100644
--- a/tmk_core/common/keyboard.c
+++ b/tmk_core/common/keyboard.c
@@ -72,6 +72,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef HD44780_ENABLE
 #   include "hd44780.h"
 #endif
+#ifdef QWIIC_ENABLE
+#   include "qwiic.h"
+#endif
 
 #ifdef MATRIX_HAS_GHOST
 extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
@@ -161,6 +164,9 @@ bool is_keyboard_master(void) {
 void keyboard_init(void) {
     timer_init();
     matrix_init();
+#ifdef QWIIC_ENABLE
+    qwiic_init();
+#endif
 #ifdef PS2_MOUSE_ENABLE
     ps2_mouse_init();
 #endif
@@ -270,6 +276,10 @@ void keyboard_task(void)
 
 MATRIX_LOOP_END:
 
+#ifdef QWIIC_ENABLE
+    qwiic_task();
+#endif
+
 #ifdef MOUSEKEY_ENABLE
     // mousekey repeat & acceleration
     mousekey_task();
-- 
cgit v1.2.3-70-g09d2


From df33618b26bb7ff0c0eff619b2d638490c514ce4 Mon Sep 17 00:00:00 2001
From: yiancar <yiangosyiangou@cytanet.com.cy>
Date: Wed, 19 Dec 2018 13:56:44 +0000
Subject: Minor STM32 i2c driver cleanup

---
 drivers/arm/i2c_master.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c
index ab962ea95..4417dc985 100644
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -45,8 +45,6 @@ static const I2CConfig i2cconfig = {
 __attribute__ ((weak))
 void i2c_init(void)
 {
-  //palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT);
-
   // Try releasing special pins for a short time
   palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
   palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
-- 
cgit v1.2.3-70-g09d2


From b13162f7fd5a4c09dff15ff6f9713526622925a7 Mon Sep 17 00:00:00 2001
From: yiancar <yiangosyiangou@cytanet.com.cy>
Date: Wed, 19 Dec 2018 13:59:58 +0000
Subject: Also fix use of weak stm32 internal pullup

---
 drivers/arm/i2c_master.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c
index 4417dc985..385bd97cb 100644
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -51,8 +51,8 @@ void i2c_init(void)
 
   chThdSleepMilliseconds(10);
  
-  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
-  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }
-- 
cgit v1.2.3-70-g09d2