From 200444f8d2c12ac04fd081745c74020c92d5da16 Mon Sep 17 00:00:00 2001 From: flehrad <20124416+flehrad@users.noreply.github.com> Date: Fri, 31 Jul 2020 08:04:49 +1000 Subject: [Keyboard] relocating boards by flehrad (#9635) Co-authored-by: flehrad --- keyboards/flehrad/bigswitch/README.md | 16 + keyboards/flehrad/bigswitch/bigswitch.c | 37 ++ keyboards/flehrad/bigswitch/bigswitch.h | 28 ++ keyboards/flehrad/bigswitch/config.h | 57 +++ keyboards/flehrad/bigswitch/info.json | 13 + .../flehrad/bigswitch/keymaps/333fred/config.h | 20 + .../flehrad/bigswitch/keymaps/333fred/keymap.c | 123 +++++ .../flehrad/bigswitch/keymaps/333fred/rules.mk | 5 + .../flehrad/bigswitch/keymaps/default/keymap.c | 27 + .../flehrad/bigswitch/keymaps/wanleg/config.h | 42 ++ .../flehrad/bigswitch/keymaps/wanleg/keymap.c | 26 + .../flehrad/bigswitch/keymaps/wanleg/rules.mk | 15 + keyboards/flehrad/bigswitch/rules.mk | 27 + keyboards/flehrad/downbubble/config.h | 240 +++++++++ keyboards/flehrad/downbubble/downbubble.c | 16 + keyboards/flehrad/downbubble/downbubble.h | 111 ++++ keyboards/flehrad/downbubble/info.json | 559 +++++++++++++++++++++ .../flehrad/downbubble/keymaps/default/config.h | 19 + .../flehrad/downbubble/keymaps/default/keymap.c | 103 ++++ .../flehrad/downbubble/keymaps/default/readme.md | 1 + keyboards/flehrad/downbubble/license | 201 ++++++++ keyboards/flehrad/downbubble/readme.md | 15 + keyboards/flehrad/downbubble/rules.mk | 33 ++ keyboards/flehrad/numbrero/config.h | 46 ++ keyboards/flehrad/numbrero/info.json | 62 +++ .../flehrad/numbrero/keymaps/default/keymap.c | 30 ++ keyboards/flehrad/numbrero/license | 201 ++++++++ keyboards/flehrad/numbrero/numbrero.c | 1 + keyboards/flehrad/numbrero/numbrero.h | 30 ++ keyboards/flehrad/numbrero/readme.md | 13 + keyboards/flehrad/numbrero/rules.mk | 26 + keyboards/flehrad/snagpad/config.h | 49 ++ keyboards/flehrad/snagpad/info.json | 56 +++ keyboards/flehrad/snagpad/keymaps/default/keymap.c | 63 +++ keyboards/flehrad/snagpad/keymaps/via/keymap.c | 76 +++ keyboards/flehrad/snagpad/keymaps/via/rules.mk | 1 + keyboards/flehrad/snagpad/license | 201 ++++++++ keyboards/flehrad/snagpad/readme.md | 21 + keyboards/flehrad/snagpad/rules.mk | 27 + keyboards/flehrad/snagpad/snagpad.c | 1 + keyboards/flehrad/snagpad/snagpad.h | 30 ++ keyboards/flehrad/tradestation/config.h | 46 ++ keyboards/flehrad/tradestation/info.json | 15 + .../flehrad/tradestation/keymaps/default/keymap.c | 61 +++ keyboards/flehrad/tradestation/license | 201 ++++++++ keyboards/flehrad/tradestation/readme.md | 27 + keyboards/flehrad/tradestation/rules.mk | 28 ++ keyboards/flehrad/tradestation/tradestation.c | 1 + keyboards/flehrad/tradestation/tradestation.h | 27 + 49 files changed, 3074 insertions(+) create mode 100644 keyboards/flehrad/bigswitch/README.md create mode 100644 keyboards/flehrad/bigswitch/bigswitch.c create mode 100644 keyboards/flehrad/bigswitch/bigswitch.h create mode 100644 keyboards/flehrad/bigswitch/config.h create mode 100644 keyboards/flehrad/bigswitch/info.json create mode 100644 keyboards/flehrad/bigswitch/keymaps/333fred/config.h create mode 100644 keyboards/flehrad/bigswitch/keymaps/333fred/keymap.c create mode 100644 keyboards/flehrad/bigswitch/keymaps/333fred/rules.mk create mode 100644 keyboards/flehrad/bigswitch/keymaps/default/keymap.c create mode 100644 keyboards/flehrad/bigswitch/keymaps/wanleg/config.h create mode 100644 keyboards/flehrad/bigswitch/keymaps/wanleg/keymap.c create mode 100644 keyboards/flehrad/bigswitch/keymaps/wanleg/rules.mk create mode 100644 keyboards/flehrad/bigswitch/rules.mk create mode 100644 keyboards/flehrad/downbubble/config.h create mode 100644 keyboards/flehrad/downbubble/downbubble.c create mode 100644 keyboards/flehrad/downbubble/downbubble.h create mode 100644 keyboards/flehrad/downbubble/info.json create mode 100644 keyboards/flehrad/downbubble/keymaps/default/config.h create mode 100644 keyboards/flehrad/downbubble/keymaps/default/keymap.c create mode 100644 keyboards/flehrad/downbubble/keymaps/default/readme.md create mode 100644 keyboards/flehrad/downbubble/license create mode 100644 keyboards/flehrad/downbubble/readme.md create mode 100644 keyboards/flehrad/downbubble/rules.mk create mode 100644 keyboards/flehrad/numbrero/config.h create mode 100644 keyboards/flehrad/numbrero/info.json create mode 100644 keyboards/flehrad/numbrero/keymaps/default/keymap.c create mode 100644 keyboards/flehrad/numbrero/license create mode 100644 keyboards/flehrad/numbrero/numbrero.c create mode 100644 keyboards/flehrad/numbrero/numbrero.h create mode 100644 keyboards/flehrad/numbrero/readme.md create mode 100644 keyboards/flehrad/numbrero/rules.mk create mode 100644 keyboards/flehrad/snagpad/config.h create mode 100644 keyboards/flehrad/snagpad/info.json create mode 100644 keyboards/flehrad/snagpad/keymaps/default/keymap.c create mode 100644 keyboards/flehrad/snagpad/keymaps/via/keymap.c create mode 100644 keyboards/flehrad/snagpad/keymaps/via/rules.mk create mode 100644 keyboards/flehrad/snagpad/license create mode 100644 keyboards/flehrad/snagpad/readme.md create mode 100644 keyboards/flehrad/snagpad/rules.mk create mode 100644 keyboards/flehrad/snagpad/snagpad.c create mode 100644 keyboards/flehrad/snagpad/snagpad.h create mode 100644 keyboards/flehrad/tradestation/config.h create mode 100644 keyboards/flehrad/tradestation/info.json create mode 100644 keyboards/flehrad/tradestation/keymaps/default/keymap.c create mode 100644 keyboards/flehrad/tradestation/license create mode 100644 keyboards/flehrad/tradestation/readme.md create mode 100644 keyboards/flehrad/tradestation/rules.mk create mode 100644 keyboards/flehrad/tradestation/tradestation.c create mode 100644 keyboards/flehrad/tradestation/tradestation.h (limited to 'keyboards/flehrad') diff --git a/keyboards/flehrad/bigswitch/README.md b/keyboards/flehrad/bigswitch/README.md new file mode 100644 index 000000000..1a0fb155a --- /dev/null +++ b/keyboards/flehrad/bigswitch/README.md @@ -0,0 +1,16 @@ +Big Switch PCB by flehrad +========================= + +Designed by Don of the Board Podcast and sold as a kit by [keeb.io](https://keeb.io/collections/frontpage/products/big-switch-pcb?variant=7507922845726) + +### PCB Files + +https://github.com/flehrad/Big-Switch-PCB + +make: flehrad/bigswitch:default + +### Technical Specifications + + * Uses a atmega32u4 pro micro or pin compatible MCU + * Pins B5 and B6 connect to the pins on the Big Switch + * Optionally you may add a RGB strip to pin D3 for data and take power from VCC and GND diff --git a/keyboards/flehrad/bigswitch/bigswitch.c b/keyboards/flehrad/bigswitch/bigswitch.c new file mode 100644 index 000000000..32f9f7fab --- /dev/null +++ b/keyboards/flehrad/bigswitch/bigswitch.c @@ -0,0 +1,37 @@ +/* +Copyright 2018 QMK Contributors + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "bigswitch.h" + +volatile uint8_t runonce = true; +static uint16_t my_timer; + +__attribute__ ((weak)) +void matrix_init_user(void) { + my_timer = timer_read(); +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +#if defined(RGBLIGHT_ENABLE) + if (runonce && timer_elapsed(my_timer) > 1000) { + runonce = false; + rgblight_sethsv_noeeprom(0x0, 0xff, 0x80); + rgblight_mode_noeeprom(9); + rgblight_enable_noeeprom(); + } +#endif +} diff --git a/keyboards/flehrad/bigswitch/bigswitch.h b/keyboards/flehrad/bigswitch/bigswitch.h new file mode 100644 index 000000000..ea3d51a1f --- /dev/null +++ b/keyboards/flehrad/bigswitch/bigswitch.h @@ -0,0 +1,28 @@ +/* +Copyright 2018 QMK Contributors + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#ifndef BIGSWITCH_H +#define BIGSWITCH_H + +#include "quantum.h" + +#define LAYOUT( \ + K00 \ +) { \ + { K00 } \ +} + +#endif diff --git a/keyboards/flehrad/bigswitch/config.h b/keyboards/flehrad/bigswitch/config.h new file mode 100644 index 000000000..220f2591b --- /dev/null +++ b/keyboards/flehrad/bigswitch/config.h @@ -0,0 +1,57 @@ +/* +Copyright 2018 QMK Contributors + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x1209 +#define PRODUCT_ID 0xB195 +#define DEVICE_VER 0x0001 +#define MANUFACTURER flehrad +#define PRODUCT BigSwitch PCB +#define DESCRIPTION A single key board for Novelkeys Big Switch + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 1 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B5 } +#define MATRIX_COL_PINS { B6 } +#define UNUSED_PINS { } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 50 + +/* key combination for command */ +#define IS_COMMAND() ( \ + false \ +) + + +#ifdef RGBLIGHT_ENABLE +#define RGB_DI_PIN D3 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 +#endif + +#endif diff --git a/keyboards/flehrad/bigswitch/info.json b/keyboards/flehrad/bigswitch/info.json new file mode 100644 index 000000000..8d3d746f5 --- /dev/null +++ b/keyboards/flehrad/bigswitch/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "Bigswitch PCB", + "url": "", + "maintainer": "qmk", + "bootloader": "", + "width": 4, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0, "w":4, "h":4}] + } + } +} diff --git a/keyboards/flehrad/bigswitch/keymaps/333fred/config.h b/keyboards/flehrad/bigswitch/keymaps/333fred/config.h new file mode 100644 index 000000000..76f13f08b --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/333fred/config.h @@ -0,0 +1,20 @@ +/* +Copyright 2018 Fredric Silberberg (333fred) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +// Long tapping term on the big switch, because it takes so long to press +#define TAPPING_TERM 500 diff --git a/keyboards/flehrad/bigswitch/keymaps/333fred/keymap.c b/keyboards/flehrad/bigswitch/keymaps/333fred/keymap.c new file mode 100644 index 000000000..be40fecb2 --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/333fred/keymap.c @@ -0,0 +1,123 @@ +#include QMK_KEYBOARD_H + +typedef enum { + SINGLE_TAP, SINGLE_HOLD, DOUBLE, TRIPLE, QUAD +} tap_dance_state_enum; + +enum { + TD_KEY = 0 +}; + +static tap_dance_state_enum tap_dance_state; +static bool tap_dance_active = false; +static uint16_t timer; + +void dance_cycle(bool override_timer) { + if (tap_dance_active) + { + if (timer_elapsed(timer) > 100 || override_timer) + { + switch (tap_dance_state) + { + case SINGLE_HOLD: + { + rgblight_increase_hue_noeeprom(); + break; + } + + case DOUBLE: + { + rgblight_step_noeeprom(); + break; + } + + case TRIPLE: + { + rgblight_toggle_noeeprom(); + break; + } + + default: + // Not needed + break; + } + + timer = timer_read(); + } + } +} + +void dance_finished(qk_tap_dance_state_t *state, void* user_data) { + // Determine the current state + switch (state->count) + { + case 1: + { + if (state->interrupted || state->pressed == 0) tap_dance_state = SINGLE_TAP; + else tap_dance_state = SINGLE_HOLD; + break; + } + case 2: + { + tap_dance_state = DOUBLE; + break; + } + case 3: + { + tap_dance_state = TRIPLE; + break; + } + default: + { + tap_dance_state = QUAD; + break; + } + } + + switch (tap_dance_state) + { + case SINGLE_TAP: + { + // VS Build: CTRL+SHIFT+B + send_string_with_delay_P(PSTR(SS_DOWN(X_LCTRL) SS_DOWN(X_LSHIFT) "b" SS_UP(X_LSHIFT) SS_UP(X_LCTRL)), 10); + tap_dance_active = false; + break; + } + + case SINGLE_HOLD: + case DOUBLE: + case TRIPLE: + { + // These are handled by the matrix_scan, which will register the appropriate rgb + // functions every scan + tap_dance_active = true; + timer = timer_read(); + dance_cycle(true); + break; + } + + case QUAD: + { + // Reprogram + reset_keyboard(); + break; + } + } +} + +void dance_reset(qk_tap_dance_state_t *state, void* user_data) +{ + tap_dance_active = false; +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_KEY] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_finished, dance_reset) +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(TD(TD_KEY)) +}; + +void matrix_scan_user(void) { + dance_cycle(false); +} diff --git a/keyboards/flehrad/bigswitch/keymaps/333fred/rules.mk b/keyboards/flehrad/bigswitch/keymaps/333fred/rules.mk new file mode 100644 index 000000000..20aaadacb --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/333fred/rules.mk @@ -0,0 +1,5 @@ +# I'm not using things from my userpace in this one +USER_NAME = disable + +RGBLIGHT_ENABLE = yes +TAP_DANCE_ENABLE = yes diff --git a/keyboards/flehrad/bigswitch/keymaps/default/keymap.c b/keyboards/flehrad/bigswitch/keymaps/default/keymap.c new file mode 100644 index 000000000..210d00123 --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/default/keymap.c @@ -0,0 +1,27 @@ +/* +Copyright 2018 QMK Contributors + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H +#define KC_OSX_EJECT 0x66 +#define LOCK_OSX LSFT(LCTL(KC_OSX_EJECT)) +#define SLEEP_OSX LALT(LGUI(KC_OSX_EJECT)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +LAYOUT(SLEEP_OSX), + +}; diff --git a/keyboards/flehrad/bigswitch/keymaps/wanleg/config.h b/keyboards/flehrad/bigswitch/keymaps/wanleg/config.h new file mode 100644 index 000000000..54abb9a6c --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/wanleg/config.h @@ -0,0 +1,42 @@ +/* Copyright 2018 wanleg + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here +#undef MATRIX_ROW_PINS +#define MATRIX_ROW_PINS { B4 } +#undef MATRIX_COL_PINS +#define MATRIX_COL_PINS { B6 } + +/* COL2ROW, ROW2COL*/ +#undef DIODE_DIRECTION +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B5 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 +#define BREATHING_PERIOD 5 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#undef DEBOUNCE +#define DEBOUNCE 5 + +// set flashing LED with QMK DFU +#define QMK_LED B0 + +// set audio pin +#define C6_AUDIO diff --git a/keyboards/flehrad/bigswitch/keymaps/wanleg/keymap.c b/keyboards/flehrad/bigswitch/keymaps/wanleg/keymap.c new file mode 100644 index 000000000..76d0808fd --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/wanleg/keymap.c @@ -0,0 +1,26 @@ +/* Copyright 2018 wanleg + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "wanleg.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT( /* Base */ +TD(CAD_TD) \ +), +[1] = LAYOUT( /*Secondary*/ +TD(BSW_TAP_DANCE) \ +), +}; \ No newline at end of file diff --git a/keyboards/flehrad/bigswitch/keymaps/wanleg/rules.mk b/keyboards/flehrad/bigswitch/keymaps/wanleg/rules.mk new file mode 100644 index 000000000..75da67fa4 --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/wanleg/rules.mk @@ -0,0 +1,15 @@ +#If using a ProMicro and it has the QMK DFU bootloader instead of Caterina, +#run "make : dfu=qmk" when compiling to ensure it is flagged properly after being flashed +ifeq ($(strip $(dfu)), qmk) + BOOTLOADER = qmk-dfu +endif + +AUDIO_ENABLE = yes # Audio output on port C6 +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/flehrad/bigswitch/rules.mk b/keyboards/flehrad/bigswitch/rules.mk new file mode 100644 index 000000000..88844733f --- /dev/null +++ b/keyboards/flehrad/bigswitch/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled +AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below +RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port. + diff --git a/keyboards/flehrad/downbubble/config.h b/keyboards/flehrad/downbubble/config.h new file mode 100644 index 000000000..f2628cb70 --- /dev/null +++ b/keyboards/flehrad/downbubble/config.h @@ -0,0 +1,240 @@ +/* +Copyright 2018 Don Chiou + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Flehrad +#define PRODUCT downbubble +#define DESCRIPTION An Ergonomic Centered Numpad Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 20 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F1, F2, F3, F4, F5, F6 } +#define MATRIX_COL_PINS { F7, C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, D6, D5, D4, D3, D2, D1, D0, B7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/flehrad/downbubble/downbubble.c b/keyboards/flehrad/downbubble/downbubble.c new file mode 100644 index 000000000..48be8e499 --- /dev/null +++ b/keyboards/flehrad/downbubble/downbubble.c @@ -0,0 +1,16 @@ +/* Copyright 2018 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "downbubble.h" diff --git a/keyboards/flehrad/downbubble/downbubble.h b/keyboards/flehrad/downbubble/downbubble.h new file mode 100644 index 000000000..0df39dd9e --- /dev/null +++ b/keyboards/flehrad/downbubble/downbubble.h @@ -0,0 +1,111 @@ +/* Copyright 2018 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_standard( \ + K00, K01, K02, K03, K04, K05, K06, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, K118, K119,\ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219,\ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K29, K310, K311, K312, K313, K314, K315, K317, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K410, K411, K412, K413, K414, K416, K418, \ + K50, K51, K52, K53, K54, K56, K58, K49, K510, K512, K513, K514, K516, K517, K518, K519 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, KC_NO, KC_NO, KC_NO, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, KC_NO, K118, K119 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, KC_NO, K310, K311, K312, K313, K314, K315, KC_NO, K317, KC_NO, KC_NO }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K410, K411, K412, K413, K414, KC_NO, K416, KC_NO, K418, KC_NO }, \ + { K50, K51, K52, K53, K54, KC_NO, K56, KC_NO, K58, KC_NO, K510, KC_NO, K512, K513, K514, KC_NO, K516, K517, K518, K519 }, \ + } + +#define LAYOUT_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119,\ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219,\ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K29, K310, K311, K312, K313, K314, K315, K317, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K410, K411, K412, K413, K414, K416, K418, \ + K50, K51, K52, K53, K54, K56, K58, K49, K510, K512, K513, K514, K516, K517, K518, K519 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, KC_NO, KC_NO, KC_NO, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, KC_NO, K310, K311, K312, K313, K314, K315, KC_NO, K317, KC_NO, KC_NO }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K410, K411, K412, K413, K414, KC_NO, K416, KC_NO, K418, KC_NO }, \ + { K50, K51, K52, K53, K54, KC_NO, K56, KC_NO, K58, KC_NO, K510, KC_NO, K512, K513, K514, KC_NO, K516, K517, K518, K519 }, \ + } + +#define LAYOUT_split_rshift( \ + K00, K01, K02, K03, K04, K05, K06, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, K118, K119,\ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219,\ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K29, K310, K311, K312, K313, K314, K315, K317, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K410, K411, K412, K413, K414, K416, K417, K418, \ + K50, K51, K52, K53, K54, K56, K58, K49, K510, K512, K513, K514, K516, K517, K518, K519 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, KC_NO, KC_NO, KC_NO, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, KC_NO, K118, K119 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, KC_NO, K310, K311, K312, K313, K314, K315, KC_NO, K317, KC_NO, KC_NO }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K410, K411, K412, K413, K414, KC_NO, K416, K417, K418, KC_NO }, \ + { K50, K51, K52, K53, K54, KC_NO, K56, KC_NO, K58, KC_NO, K510, KC_NO, K512, K513, K514, KC_NO, K516, K517, K518, K519 }, \ + } + +#define LAYOUT_split_numpad( \ + K00, K01, K02, K03, K04, K05, K06, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, K118, K119,\ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219,\ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312, K313, K314, K315, K317, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K410, K411, K412, K413, K414, K416, K418, \ + K50, K51, K52, K53, K54, K56, K57, K58, K59, K510, K512, K513, K514, K516, K517, K518, K519 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, KC_NO, KC_NO, KC_NO, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, KC_NO, K118, K119 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312, K313, K314, K315, KC_NO, K317, KC_NO, KC_NO }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K410, K411, K412, K413, K414, KC_NO, K416, KC_NO, K418, KC_NO }, \ + { K50, K51, K52, K53, K54, KC_NO, K56, K57, K58, K59, K510, KC_NO, K512, K513, K514, KC_NO, K516, K517, K518, K519 }, \ + } + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119,\ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219,\ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312, K313, K314, K315, K317, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K410, K411, K412, K413, K414, K416, K417, K418, \ + K50, K51, K52, K53, K54, K56, K57, K58, K59, K510, K512, K513, K514, K516, K517, K518, K519 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, KC_NO, KC_NO, KC_NO, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312, K313, K314, K315, KC_NO, K317, KC_NO, KC_NO }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K410, K411, K412, K413, K414, KC_NO, K416, K417, K418, KC_NO }, \ + { K50, K51, K52, K53, K54, KC_NO, K56, K57, K58, K59, K510, KC_NO, K512, K513, K514, KC_NO, K516, K517, K518, K519 }, \ + } diff --git a/keyboards/flehrad/downbubble/info.json b/keyboards/flehrad/downbubble/info.json new file mode 100644 index 000000000..c5cd97de5 --- /dev/null +++ b/keyboards/flehrad/downbubble/info.json @@ -0,0 +1,559 @@ +{ + "keyboard_name": "downbubble", + "url": "", + "maintainer": "flehrad", + "width": 22.75, + "height": 6, + "layouts": { + "LAYOUT_standard": { + "layout": [ + {"label":"K00", "x":0, "y":0}, + {"label":"K01", "x":1, "y":0}, + {"label":"K02", "x":2, "y":0}, + {"label":"K03", "x":3, "y":0}, + {"label":"K04", "x":4, "y":0}, + {"label":"K05", "x":5, "y":0}, + {"label":"K06", "x":6, "y":0}, + {"label":"K010", "x":12.75, "y":0}, + {"label":"K011", "x":13.75, "y":0}, + {"label":"K012", "x":14.75, "y":0}, + {"label":"K013", "x":15.75, "y":0}, + {"label":"K014", "x":16.75, "y":0}, + {"label":"K015", "x":17.75, "y":0}, + {"label":"K016", "x":18.75, "y":0}, + {"label":"K017", "x":19.75, "y":0}, + {"label":"K018", "x":20.75, "y":0}, + {"label":"K019", "x":21.75, "y":0}, + {"label":"K10", "x":0, "y":1}, + {"label":"K11", "x":1, "y":1}, + {"label":"K12", "x":2, "y":1}, + {"label":"K13", "x":3, "y":1}, + {"label":"K14", "x":4, "y":1}, + {"label":"K15", "x":5, "y":1}, + {"label":"K16", "x":6, "y":1}, + {"label":"K17", "x":8.75, "y":1}, + {"label":"K18", "x":9.75, "y":1}, + {"label":"K19", "x":10.75, "y":1}, + {"label":"K110", "x":12.75, "y":1}, + {"label":"K111", "x":13.75, "y":1}, + {"label":"K112", "x":14.75, "y":1}, + {"label":"K113", "x":15.75, "y":1}, + {"label":"K114", "x":16.75, "y":1}, + {"label":"K115", "x":17.75, "y":1}, + {"label":"K116", "x":18.75, "y":1, "w":2}, + {"label":"K118", "x":20.75, "y":1}, + {"label":"K119", "x":21.75, "y":1}, + {"label":"K20", "x":0, "y":2, "w":1.5}, + {"label":"K21", "x":1.5, "y":2}, + {"label":"K22", "x":2.5, "y":2}, + {"label":"K23", "x":3.5, "y":2}, + {"label":"K24", "x":4.5, "y":2}, + {"label":"K25", "x":5.5, "y":2}, + {"label":"K26", "x":7.75, "y":2}, + {"label":"K17", "x":8.75, "y":2}, + {"label":"K28", "x":9.75, "y":2}, + {"label":"K210", "x":12.25, "y":2}, + {"label":"K211", "x":13.25, "y":2}, + {"label":"K212", "x":14.25, "y":2}, + {"label":"K213", "x":15.25, "y":2}, + {"label":"K214", "x":16.25, "y":2}, + {"label":"K215", "x":17.25, "y":2}, + {"label":"K216", "x":18.25, "y":2}, + {"label":"K217", "x":19.25, "y":2, "w":1.5}, + {"label":"K218", "x":20.75, "y":2}, + {"label":"K219", "x":21.75, "y":2}, + {"label":"K30", "x":0, "y":3, "w":1.75}, + {"label":"K31", "x":1.75, "y":3}, + {"label":"K32", "x":2.75, "y":3}, + {"label":"K33", "x":3.75, "y":3}, + {"label":"K34", "x":4.75, "y":3}, + {"label":"K35", "x":5.75, "y":3}, + {"label":"K36", "x":7.75, "y":3}, + {"label":"K37", "x":8.75, "y":3}, + {"label":"K38", "x":9.75, "y":3}, + {"label":"K29", "x":10.75, "y":2, "h":2}, + {"label":"K310", "x":12.5, "y":3}, + {"label":"K311", "x":13.5, "y":3}, + {"label":"K312", "x":14.5, "y":3}, + {"label":"K313", "x":15.5, "y":3}, + {"label":"K314", "x":16.5, "y":3}, + {"label":"K315", "x":17.5, "y":3}, + {"label":"K317", "x":18.5, "y":3, "w":2.25}, + {"label":"K40", "x":0, "y":4, "w":2.25}, + {"label":"K41", "x":2.25, "y":4}, + {"label":"K42", "x":3.25, "y":4}, + {"label":"K43", "x":4.25, "y":4}, + {"label":"K44", "x":5.25, "y":4}, + {"label":"K45", "x":6.25, "y":4}, + {"label":"K46", "x":7.75, "y":4}, + {"label":"K47", "x":8.75, "y":4}, + {"label":"K48", "x":9.75, "y":4}, + {"label":"K410", "x":13, "y":4}, + {"label":"K411", "x":14, "y":4}, + {"label":"K412", "x":15, "y":4}, + {"label":"K413", "x":16, "y":4}, + {"label":"K414", "x":17, "y":4}, + {"label":"K416", "x":18, "y":4, "w":2.75}, + {"label":"K418", "x":20.75, "y":4}, + {"label":"K50", "x":0, "y":5, "w":1.25}, + {"label":"K51", "x":1.25, "y":5, "w":1.25}, + {"label":"K52", "x":2.5, "y":5, "w":1.25}, + {"label":"K53", "x":3.75, "y":5, "w":1.25}, + {"label":"K54", "x":5, "y":5, "w":2.25}, + {"label":"K56", "x":7.75, "y":5, "w":2}, + {"label":"K58", "x":9.75, "y":5}, + {"label":"K49", "x":10.75, "y":4, "h":2}, + {"label":"K510", "x":13, "y":5, "w":2}, + {"label":"K512", "x":15, "y":5, "w":1.25}, + {"label":"K513", "x":16.25, "y":5, "w":1.25}, + {"label":"K514", "x":17.5, "y":5, "w":1.25}, + {"label":"K516", "x":18.75, "y":5}, + {"label":"K517", "x":19.75, "y":5}, + {"label":"K518", "x":20.75, "y":5}, + {"label":"K519", "x":21.75, "y":5} + ] + }, + "LAYOUT_split_bs": { + "layout": [ + {"label":"K00", "x":0, "y":0}, + {"label":"K01", "x":1, "y":0}, + {"label":"K02", "x":2, "y":0}, + {"label":"K03", "x":3, "y":0}, + {"label":"K04", "x":4, "y":0}, + {"label":"K05", "x":5, "y":0}, + {"label":"K06", "x":6, "y":0}, + {"label":"K010", "x":12.75, "y":0}, + {"label":"K011", "x":13.75, "y":0}, + {"label":"K012", "x":14.75, "y":0}, + {"label":"K013", "x":15.75, "y":0}, + {"label":"K014", "x":16.75, "y":0}, + {"label":"K015", "x":17.75, "y":0}, + {"label":"K016", "x":18.75, "y":0}, + {"label":"K017", "x":19.75, "y":0}, + {"label":"K018", "x":20.75, "y":0}, + {"label":"K019", "x":21.75, "y":0}, + {"label":"K10", "x":0, "y":1}, + {"label":"K11", "x":1, "y":1}, + {"label":"K12", "x":2, "y":1}, + {"label":"K13", "x":3, "y":1}, + {"label":"K14", "x":4, "y":1}, + {"label":"K15", "x":5, "y":1}, + {"label":"K16", "x":6, "y":1}, + {"label":"K17", "x":8.75, "y":1}, + {"label":"K18", "x":9.75, "y":1}, + {"label":"K19", "x":10.75, "y":1}, + {"label":"K110", "x":12.75, "y":1}, + {"label":"K111", "x":13.75, "y":1}, + {"label":"K112", "x":14.75, "y":1}, + {"label":"K113", "x":15.75, "y":1}, + {"label":"K114", "x":16.75, "y":1}, + {"label":"K115", "x":17.75, "y":1}, + {"label":"K116", "x":18.75, "y":1}, + {"label":"K117", "x":19.75, "y":1}, + {"label":"K118", "x":20.75, "y":1}, + {"label":"K119", "x":21.75, "y":1}, + {"label":"K20", "x":0, "y":2, "w":1.5}, + {"label":"K21", "x":1.5, "y":2}, + {"label":"K22", "x":2.5, "y":2}, + {"label":"K23", "x":3.5, "y":2}, + {"label":"K24", "x":4.5, "y":2}, + {"label":"K25", "x":5.5, "y":2}, + {"label":"K26", "x":7.75, "y":2}, + {"label":"K17", "x":8.75, "y":2}, + {"label":"K28", "x":9.75, "y":2}, + {"label":"K210", "x":12.25, "y":2}, + {"label":"K211", "x":13.25, "y":2}, + {"label":"K212", "x":14.25, "y":2}, + {"label":"K213", "x":15.25, "y":2}, + {"label":"K214", "x":16.25, "y":2}, + {"label":"K215", "x":17.25, "y":2}, + {"label":"K216", "x":18.25, "y":2}, + {"label":"K217", "x":19.25, "y":2, "w":1.5}, + {"label":"K218", "x":20.75, "y":2}, + {"label":"K219", "x":21.75, "y":2}, + {"label":"K30", "x":0, "y":3, "w":1.75}, + {"label":"K31", "x":1.75, "y":3}, + {"label":"K32", "x":2.75, "y":3}, + {"label":"K33", "x":3.75, "y":3}, + {"label":"K34", "x":4.75, "y":3}, + {"label":"K35", "x":5.75, "y":3}, + {"label":"K36", "x":7.75, "y":3}, + {"label":"K37", "x":8.75, "y":3}, + {"label":"K38", "x":9.75, "y":3}, + {"label":"K29", "x":10.75, "y":2, "h":2}, + {"label":"K310", "x":12.5, "y":3}, + {"label":"K311", "x":13.5, "y":3}, + {"label":"K312", "x":14.5, "y":3}, + {"label":"K313", "x":15.5, "y":3}, + {"label":"K314", "x":16.5, "y":3}, + {"label":"K315", "x":17.5, "y":3}, + {"label":"K317", "x":18.5, "y":3, "w":2.25}, + {"label":"K40", "x":0, "y":4, "w":2.25}, + {"label":"K41", "x":2.25, "y":4}, + {"label":"K42", "x":3.25, "y":4}, + {"label":"K43", "x":4.25, "y":4}, + {"label":"K44", "x":5.25, "y":4}, + {"label":"K45", "x":6.25, "y":4}, + {"label":"K46", "x":7.75, "y":4}, + {"label":"K47", "x":8.75, "y":4}, + {"label":"K48", "x":9.75, "y":4}, + {"label":"K410", "x":13, "y":4}, + {"label":"K411", "x":14, "y":4}, + {"label":"K412", "x":15, "y":4}, + {"label":"K413", "x":16, "y":4}, + {"label":"K414", "x":17, "y":4}, + {"label":"K416", "x":18, "y":4, "w":2.75}, + {"label":"K418", "x":20.75, "y":4}, + {"label":"K50", "x":0, "y":5, "w":1.25}, + {"label":"K51", "x":1.25, "y":5, "w":1.25}, + {"label":"K52", "x":2.5, "y":5, "w":1.25}, + {"label":"K53", "x":3.75, "y":5, "w":1.25}, + {"label":"K54", "x":5, "y":5, "w":2.25}, + {"label":"K56", "x":7.75, "y":5, "w":2}, + {"label":"K58", "x":9.75, "y":5}, + {"label":"K49", "x":10.75, "y":4, "h":2}, + {"label":"K510", "x":13, "y":5, "w":2}, + {"label":"K512", "x":15, "y":5, "w":1.25}, + {"label":"K513", "x":16.25, "y":5, "w":1.25}, + {"label":"K514", "x":17.5, "y":5, "w":1.25}, + {"label":"K516", "x":18.75, "y":5}, + {"label":"K517", "x":19.75, "y":5}, + {"label":"K518", "x":20.75, "y":5}, + {"label":"K519", "x":21.75, "y":5} + ] + }, + "LAYOUT_split_rshift": { + "layout": [ + {"label":"K00", "x":0, "y":0}, + {"label":"K01", "x":1, "y":0}, + {"label":"K02", "x":2, "y":0}, + {"label":"K03", "x":3, "y":0}, + {"label":"K04", "x":4, "y":0}, + {"label":"K05", "x":5, "y":0}, + {"label":"K06", "x":6, "y":0}, + {"label":"K010", "x":12.75, "y":0}, + {"label":"K011", "x":13.75, "y":0}, + {"label":"K012", "x":14.75, "y":0}, + {"label":"K013", "x":15.75, "y":0}, + {"label":"K014", "x":16.75, "y":0}, + {"label":"K015", "x":17.75, "y":0}, + {"label":"K016", "x":18.75, "y":0}, + {"label":"K017", "x":19.75, "y":0}, + {"label":"K018", "x":20.75, "y":0}, + {"label":"K019", "x":21.75, "y":0}, + {"label":"K10", "x":0, "y":1}, + {"label":"K11", "x":1, "y":1}, + {"label":"K12", "x":2, "y":1}, + {"label":"K13", "x":3, "y":1}, + {"label":"K14", "x":4, "y":1}, + {"label":"K15", "x":5, "y":1}, + {"label":"K16", "x":6, "y":1}, + {"label":"K17", "x":8.75, "y":1}, + {"label":"K18", "x":9.75, "y":1}, + {"label":"K19", "x":10.75, "y":1}, + {"label":"K110", "x":12.75, "y":1}, + {"label":"K111", "x":13.75, "y":1}, + {"label":"K112", "x":14.75, "y":1}, + {"label":"K113", "x":15.75, "y":1}, + {"label":"K114", "x":16.75, "y":1}, + {"label":"K115", "x":17.75, "y":1}, + {"label":"K116", "x":18.75, "y":1, "w":2}, + {"label":"K118", "x":20.75, "y":1}, + {"label":"K119", "x":21.75, "y":1}, + {"label":"K20", "x":0, "y":2, "w":1.5}, + {"label":"K21", "x":1.5, "y":2}, + {"label":"K22", "x":2.5, "y":2}, + {"label":"K23", "x":3.5, "y":2}, + {"label":"K24", "x":4.5, "y":2}, + {"label":"K25", "x":5.5, "y":2}, + {"label":"K26", "x":7.75, "y":2}, + {"label":"K17", "x":8.75, "y":2}, + {"label":"K28", "x":9.75, "y":2}, + {"label":"K210", "x":12.25, "y":2}, + {"label":"K211", "x":13.25, "y":2}, + {"label":"K212", "x":14.25, "y":2}, + {"label":"K213", "x":15.25, "y":2}, + {"label":"K214", "x":16.25, "y":2}, + {"label":"K215", "x":17.25, "y":2}, + {"label":"K216", "x":18.25, "y":2}, + {"label":"K217", "x":19.25, "y":2, "w":1.5}, + {"label":"K218", "x":20.75, "y":2}, + {"label":"K219", "x":21.75, "y":2}, + {"label":"K30", "x":0, "y":3, "w":1.75}, + {"label":"K31", "x":1.75, "y":3}, + {"label":"K32", "x":2.75, "y":3}, + {"label":"K33", "x":3.75, "y":3}, + {"label":"K34", "x":4.75, "y":3}, + {"label":"K35", "x":5.75, "y":3}, + {"label":"K36", "x":7.75, "y":3}, + {"label":"K37", "x":8.75, "y":3}, + {"label":"K38", "x":9.75, "y":3}, + {"label":"K29", "x":10.75, "y":2, "h":2}, + {"label":"K310", "x":12.5, "y":3}, + {"label":"K311", "x":13.5, "y":3}, + {"label":"K312", "x":14.5, "y":3}, + {"label":"K313", "x":15.5, "y":3}, + {"label":"K314", "x":16.5, "y":3}, + {"label":"K315", "x":17.5, "y":3}, + {"label":"K317", "x":18.5, "y":3, "w":2.25}, + {"label":"K40", "x":0, "y":4, "w":2.25}, + {"label":"K41", "x":2.25, "y":4}, + {"label":"K42", "x":3.25, "y":4}, + {"label":"K43", "x":4.25, "y":4}, + {"label":"K44", "x":5.25, "y":4}, + {"label":"K45", "x":6.25, "y":4}, + {"label":"K46", "x":7.75, "y":4}, + {"label":"K47", "x":8.75, "y":4}, + {"label":"K48", "x":9.75, "y":4}, + {"label":"K410", "x":13, "y":4}, + {"label":"K411", "x":14, "y":4}, + {"label":"K412", "x":15, "y":4}, + {"label":"K413", "x":16, "y":4}, + {"label":"K414", "x":17, "y":4}, + {"label":"K416", "x":18, "y":4, "w":1.75}, + {"label":"K417", "x":19.75, "y":4}, + {"label":"K418", "x":20.75, "y":4}, + {"label":"K50", "x":0, "y":5, "w":1.25}, + {"label":"K51", "x":1.25, "y":5, "w":1.25}, + {"label":"K52", "x":2.5, "y":5, "w":1.25}, + {"label":"K53", "x":3.75, "y":5, "w":1.25}, + {"label":"K54", "x":5, "y":5, "w":2.25}, + {"label":"K56", "x":7.75, "y":5, "w":2}, + {"label":"K58", "x":9.75, "y":5}, + {"label":"K49", "x":10.75, "y":4, "h":2}, + {"label":"K510", "x":13, "y":5, "w":2}, + {"label":"K512", "x":15, "y":5, "w":1.25}, + {"label":"K513", "x":16.25, "y":5, "w":1.25}, + {"label":"K514", "x":17.5, "y":5, "w":1.25}, + {"label":"K516", "x":18.75, "y":5}, + {"label":"K517", "x":19.75, "y":5}, + {"label":"K518", "x":20.75, "y":5}, + {"label":"K519", "x":21.75, "y":5} + ] + }, + "LAYOUT_split_numpad": { + "layout": [ + {"label":"K00", "x":0, "y":0}, + {"label":"K01", "x":1, "y":0}, + {"label":"K02", "x":2, "y":0}, + {"label":"K03", "x":3, "y":0}, + {"label":"K04", "x":4, "y":0}, + {"label":"K05", "x":5, "y":0}, + {"label":"K06", "x":6, "y":0}, + {"label":"K010", "x":12.75, "y":0}, + {"label":"K011", "x":13.75, "y":0}, + {"label":"K012", "x":14.75, "y":0}, + {"label":"K013", "x":15.75, "y":0}, + {"label":"K014", "x":16.75, "y":0}, + {"label":"K015", "x":17.75, "y":0}, + {"label":"K016", "x":18.75, "y":0}, + {"label":"K017", "x":19.75, "y":0}, + {"label":"K018", "x":20.75, "y":0}, + {"label":"K019", "x":21.75, "y":0}, + {"label":"K10", "x":0, "y":1}, + {"label":"K11", "x":1, "y":1}, + {"label":"K12", "x":2, "y":1}, + {"label":"K13", "x":3, "y":1}, + {"label":"K14", "x":4, "y":1}, + {"label":"K15", "x":5, "y":1}, + {"label":"K16", "x":6, "y":1}, + {"label":"K17", "x":8.75, "y":1}, + {"label":"K18", "x":9.75, "y":1}, + {"label":"K19", "x":10.75, "y":1}, + {"label":"K110", "x":12.75, "y":1}, + {"label":"K111", "x":13.75, "y":1}, + {"label":"K112", "x":14.75, "y":1}, + {"label":"K113", "x":15.75, "y":1}, + {"label":"K114", "x":16.75, "y":1}, + {"label":"K115", "x":17.75, "y":1}, + {"label":"K116", "x":18.75, "y":1, "w":2}, + {"label":"K118", "x":20.75, "y":1}, + {"label":"K119", "x":21.75, "y":1}, + {"label":"K20", "x":0, "y":2, "w":1.5}, + {"label":"K21", "x":1.5, "y":2}, + {"label":"K22", "x":2.5, "y":2}, + {"label":"K23", "x":3.5, "y":2}, + {"label":"K24", "x":4.5, "y":2}, + {"label":"K25", "x":5.5, "y":2}, + {"label":"K26", "x":7.75, "y":2}, + {"label":"K17", "x":8.75, "y":2}, + {"label":"K28", "x":9.75, "y":2}, + {"label":"K29", "x":10.75, "y":2}, + {"label":"K210", "x":12.25, "y":2}, + {"label":"K211", "x":13.25, "y":2}, + {"label":"K212", "x":14.25, "y":2}, + {"label":"K213", "x":15.25, "y":2}, + {"label":"K214", "x":16.25, "y":2}, + {"label":"K215", "x":17.25, "y":2}, + {"label":"K216", "x":18.25, "y":2}, + {"label":"K217", "x":19.25, "y":2, "w":1.5}, + {"label":"K218", "x":20.75, "y":2}, + {"label":"K219", "x":21.75, "y":2}, + {"label":"K30", "x":0, "y":3, "w":1.75}, + {"label":"K31", "x":1.75, "y":3}, + {"label":"K32", "x":2.75, "y":3}, + {"label":"K33", "x":3.75, "y":3}, + {"label":"K34", "x":4.75, "y":3}, + {"label":"K35", "x":5.75, "y":3}, + {"label":"K36", "x":7.75, "y":3}, + {"label":"K37", "x":8.75, "y":3}, + {"label":"K38", "x":9.75, "y":3}, + {"label":"K39", "x":10.75, "y":3}, + {"label":"K310", "x":12.5, "y":3}, + {"label":"K311", "x":13.5, "y":3}, + {"label":"K312", "x":14.5, "y":3}, + {"label":"K313", "x":15.5, "y":3}, + {"label":"K314", "x":16.5, "y":3}, + {"label":"K315", "x":17.5, "y":3}, + {"label":"K317", "x":18.5, "y":3, "w":2.25}, + {"label":"K40", "x":0, "y":4, "w":2.25}, + {"label":"K41", "x":2.25, "y":4}, + {"label":"K42", "x":3.25, "y":4}, + {"label":"K43", "x":4.25, "y":4}, + {"label":"K44", "x":5.25, "y":4}, + {"label":"K45", "x":6.25, "y":4}, + {"label":"K46", "x":7.75, "y":4}, + {"label":"K47", "x":8.75, "y":4}, + {"label":"K48", "x":9.75, "y":4}, + {"label":"K49", "x":10.75, "y":4}, + {"label":"K410", "x":13, "y":4}, + {"label":"K411", "x":14, "y":4}, + {"label":"K412", "x":15, "y":4}, + {"label":"K413", "x":16, "y":4}, + {"label":"K414", "x":17, "y":4}, + {"label":"K416", "x":18, "y":4, "w":2.75}, + {"label":"K418", "x":20.75, "y":4}, + {"label":"K50", "x":0, "y":5, "w":1.25}, + {"label":"K51", "x":1.25, "y":5, "w":1.25}, + {"label":"K52", "x":2.5, "y":5, "w":1.25}, + {"label":"K53", "x":3.75, "y":5, "w":1.25}, + {"label":"K54", "x":5, "y":5, "w":2.25}, + {"label":"K56", "x":7.75, "y":5}, + {"Label":"K57", "x":8.75, "y":5}, + {"label":"K58", "x":9.75, "y":5}, + {"label":"K59", "x":10.75, "y":5}, + {"label":"K510", "x":13, "y":5, "w":2}, + {"label":"K512", "x":15, "y":5, "w":1.25}, + {"label":"K513", "x":16.25, "y":5, "w":1.25}, + {"label":"K514", "x":17.5, "y":5, "w":1.25}, + {"label":"K516", "x":18.75, "y":5}, + {"label":"K517", "x":19.75, "y":5}, + {"label":"K518", "x":20.75, "y":5}, + {"label":"K519", "x":21.75, "y":5} + ] + }, + "LAYOUT_all": { + "layout": [ + {"label":"K00", "x":0, "y":0}, + {"label":"K01", "x":1, "y":0}, + {"label":"K02", "x":2, "y":0}, + {"label":"K03", "x":3, "y":0}, + {"label":"K04", "x":4, "y":0}, + {"label":"K05", "x":5, "y":0}, + {"label":"K06", "x":6, "y":0}, + {"label":"K010", "x":12.75, "y":0}, + {"label":"K011", "x":13.75, "y":0}, + {"label":"K012", "x":14.75, "y":0}, + {"label":"K013", "x":15.75, "y":0}, + {"label":"K014", "x":16.75, "y":0}, + {"label":"K015", "x":17.75, "y":0}, + {"label":"K016", "x":18.75, "y":0}, + {"label":"K017", "x":19.75, "y":0}, + {"label":"K018", "x":20.75, "y":0}, + {"label":"K019", "x":21.75, "y":0}, + {"label":"K10", "x":0, "y":1}, + {"label":"K11", "x":1, "y":1}, + {"label":"K12", "x":2, "y":1}, + {"label":"K13", "x":3, "y":1}, + {"label":"K14", "x":4, "y":1}, + {"label":"K15", "x":5, "y":1}, + {"label":"K16", "x":6, "y":1}, + {"label":"K17", "x":8.75, "y":1}, + {"label":"K18", "x":9.75, "y":1}, + {"label":"K19", "x":10.75, "y":1}, + {"label":"K110", "x":12.75, "y":1}, + {"label":"K111", "x":13.75, "y":1}, + {"label":"K112", "x":14.75, "y":1}, + {"label":"K113", "x":15.75, "y":1}, + {"label":"K114", "x":16.75, "y":1}, + {"label":"K115", "x":17.75, "y":1}, + {"label":"K116", "x":18.75, "y":1}, + {"label":"K117", "x":19.75, "y":1}, + {"label":"K118", "x":20.75, "y":1}, + {"label":"K119", "x":21.75, "y":1}, + {"label":"K20", "x":0, "y":2, "w":1.5}, + {"label":"K21", "x":1.5, "y":2}, + {"label":"K22", "x":2.5, "y":2}, + {"label":"K23", "x":3.5, "y":2}, + {"label":"K24", "x":4.5, "y":2}, + {"label":"K25", "x":5.5, "y":2}, + {"label":"K26", "x":7.75, "y":2}, + {"label":"K27", "x":8.75, "y":2}, + {"label":"K28", "x":9.75, "y":2}, + {"label":"K29", "x":10.75, "y":2}, + {"label":"K210", "x":12.25, "y":2}, + {"label":"K211", "x":13.25, "y":2}, + {"label":"K212", "x":14.25, "y":2}, + {"label":"K213", "x":15.25, "y":2}, + {"label":"K214", "x":16.25, "y":2}, + {"label":"K215", "x":17.25, "y":2}, + {"label":"K216", "x":18.25, "y":2}, + {"label":"K217", "x":19.25, "y":2, "w":1.5}, + {"label":"K218", "x":20.75, "y":2}, + {"label":"K219", "x":21.75, "y":2}, + {"label":"K30", "x":0, "y":3, "w":1.75}, + {"label":"K31", "x":1.75, "y":3}, + {"label":"K32", "x":2.75, "y":3}, + {"label":"K33", "x":3.75, "y":3}, + {"label":"K34", "x":4.75, "y":3}, + {"label":"K35", "x":5.75, "y":3}, + {"label":"K36", "x":7.75, "y":3}, + {"label":"K37", "x":8.75, "y":3}, + {"label":"K38", "x":9.75, "y":3}, + {"label":"K39", "x":10.75, "y":3}, + {"label":"K310", "x":12.5, "y":3}, + {"label":"K311", "x":13.5, "y":3}, + {"label":"K312", "x":14.5, "y":3}, + {"label":"K313", "x":15.5, "y":3}, + {"label":"K314", "x":16.5, "y":3}, + {"label":"K315", "x":17.5, "y":3}, + {"label":"K317", "x":18.5, "y":3, "w":2.25}, + {"label":"K40", "x":0, "y":4, "w":2.25}, + {"label":"K41", "x":2.25, "y":4}, + {"label":"K42", "x":3.25, "y":4}, + {"label":"K43", "x":4.25, "y":4}, + {"label":"K44", "x":5.25, "y":4}, + {"label":"K45", "x":6.25, "y":4}, + {"label":"K46", "x":7.75, "y":4}, + {"label":"K47", "x":8.75, "y":4}, + {"label":"K48", "x":9.75, "y":4}, + {"label":"K49", "x":10.75, "y":4}, + {"label":"K410", "x":13, "y":4}, + {"label":"K411", "x":14, "y":4}, + {"label":"K412", "x":15, "y":4}, + {"label":"K413", "x":16, "y":4}, + {"label":"K414", "x":17, "y":4}, + {"label":"K416", "x":18, "y":4, "w":1.75}, + {"label":"K417", "x":19.75, "y":4}, + {"label":"K418", "x":20.75, "y":4}, + {"label":"K50", "x":0, "y":5, "w":1.25}, + {"label":"K51", "x":1.25, "y":5, "w":1.25}, + {"label":"K52", "x":2.5, "y":5, "w":1.25}, + {"label":"K53", "x":3.75, "y":5, "w":1.25}, + {"label":"K54", "x":5, "y":5, "w":2.25}, + {"label":"K56", "x":7.75, "y":5}, + {"label":"K57", "x":8.75, "y":5}, + {"label":"K58", "x":9.75, "y":5}, + {"label":"K59", "x":10.75, "y":5}, + {"label":"K510", "x":13, "y":5, "w":2}, + {"label":"K512", "x":15, "y":5, "w":1.25}, + {"label":"K513", "x":16.25, "y":5, "w":1.25}, + {"label":"K514", "x":17.5, "y":5, "w":1.25}, + {"label":"K516", "x":18.75, "y":5}, + {"label":"K517", "x":19.75, "y":5}, + {"label":"K518", "x":20.75, "y":5}, + {"label":"K519", "x":21.75, "y":5} + ] + } + } +} diff --git a/keyboards/flehrad/downbubble/keymaps/default/config.h b/keyboards/flehrad/downbubble/keymaps/default/config.h new file mode 100644 index 000000000..4496c5910 --- /dev/null +++ b/keyboards/flehrad/downbubble/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/flehrad/downbubble/keymaps/default/keymap.c b/keyboards/flehrad/downbubble/keymaps/default/keymap.c new file mode 100644 index 000000000..48303900f --- /dev/null +++ b/keyboards/flehrad/downbubble/keymaps/default/keymap.c @@ -0,0 +1,103 @@ +/* Copyright 2018 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_standard(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NLCK, KC_HOME, KC_TRNS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_PSLS, KC_PAST, KC_PMNS, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_END, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_P7, KC_P8, KC_P9, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_SPC, KC_P0, KC_PDOT, KC_PENT, KC_BSPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + LAYOUT_split_bs(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NLCK, KC_HOME, KC_TRNS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_PSLS, KC_PAST, KC_PMNS, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TRNS, KC_END, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_P7, KC_P8, KC_P9, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_SPC, KC_P0, KC_PDOT, KC_PENT, KC_BSPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + LAYOUT_split_rshift(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NLCK, KC_HOME, KC_TRNS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_PSLS, KC_PAST, KC_PMNS, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_END, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_P7, KC_P8, KC_P9, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_SPC, KC_P0, KC_PDOT, KC_PENT, KC_BSPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + LAYOUT_split_numpad(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NLCK, KC_HOME, KC_TRNS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_PSLS, KC_PAST, KC_PMNS, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_END, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_PENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_SPC, KC_P0, KC_TRNS, KC_PDOT, KC_TRNS, KC_BSPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + LAYOUT_all(\ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NLCK, KC_HOME, KC_TRNS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_PSLS, KC_PAST, KC_PMNS, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TRNS, KC_END, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_PENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_SPC, KC_P0, KC_TRNS, KC_PDOT, KC_TRNS, KC_BSPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/flehrad/downbubble/keymaps/default/readme.md b/keyboards/flehrad/downbubble/keymaps/default/readme.md new file mode 100644 index 000000000..757d99062 --- /dev/null +++ b/keyboards/flehrad/downbubble/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymaps for downbubble diff --git a/keyboards/flehrad/downbubble/license b/keyboards/flehrad/downbubble/license new file mode 100644 index 000000000..e6e77b089 --- /dev/null +++ b/keyboards/flehrad/downbubble/license @@ -0,0 +1,201 @@ + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. diff --git a/keyboards/flehrad/downbubble/readme.md b/keyboards/flehrad/downbubble/readme.md new file mode 100644 index 000000000..f1c83b8aa --- /dev/null +++ b/keyboards/flehrad/downbubble/readme.md @@ -0,0 +1,15 @@ +# downbubble + +Prototype hand-wired version of this keyboard - https://imgur.com/a/0KbX1JH + +This is an ergonomic keyboard with a 5 degree rotation on keyboard halves, and a rotated numpad in the center for RH users. + +Keyboard Maintainer: [Flehrad](https://github.com/flehrad) +Hardware Supported: downbubble PCB, AT90USB1286 MCU, MX switches and MiniUSB connector +Hardware Availability: The Board Podcast Slack + +Make example for this keyboard (after setting up your build environment): + + make flehrad/downbubble:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/flehrad/downbubble/rules.mk b/keyboards/flehrad/downbubble/rules.mk new file mode 100644 index 000000000..189b82720 --- /dev/null +++ b/keyboards/flehrad/downbubble/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = at90usb1286 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/flehrad/numbrero/config.h b/keyboards/flehrad/numbrero/config.h new file mode 100644 index 000000000..ac38e0814 --- /dev/null +++ b/keyboards/flehrad/numbrero/config.h @@ -0,0 +1,46 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Flehrad +#define PRODUCT Numbrero +#define DESCRIPTION Pro Micro-powered Reversible L/H Numpad with Extra Macro Keys + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 5 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F6, B5, B4, E6, F7 } +#define MATRIX_COL_PINS { D1, D0, D4, F5, F4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 5 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/flehrad/numbrero/info.json b/keyboards/flehrad/numbrero/info.json new file mode 100644 index 000000000..d2f7ebd03 --- /dev/null +++ b/keyboards/flehrad/numbrero/info.json @@ -0,0 +1,62 @@ +{ + "keyboard_name": "Numbrero", + "url": "", + "maintainer": "Flehrad", + "width": 5, + "height": 5, + "layouts": { + "LAYOUT_numbrero_numpad": { + "layout": [ + {"label":"K00", "x":0, "y":0}, + {"label":"K01", "x":1, "y":0}, + {"label":"K02", "x":2, "y":0}, + {"label":"K03", "x":3, "y":0}, + {"label":"K04", "x":4, "y":0}, + {"label":"K10", "x":0, "y":1, "h":1.5}, + {"label":"K11", "x":1, "y":1}, + {"label":"K12", "x":2, "y":1}, + {"label":"K13", "x":3, "y":1}, + {"label":"K20", "x":0, "y":2.5}, + {"label":"K21", "x":1, "y":2}, + {"label":"K22", "x":2, "y":2}, + {"label":"K23", "x":3, "y":2}, + {"label":"K14", "x":4, "y":1, "h":2}, + {"label":"K30", "x":0, "y":3.5, "h":1.5}, + {"label":"K31", "x":1, "y":3}, + {"label":"K32", "x":2, "y":3}, + {"label":"K33", "x":3, "y":3}, + {"label":"K41", "x":1, "y":4, "w":2}, + {"label":"K43", "x":3, "y":4}, + {"label":"K34", "x":4, "y":3, "h":2} + ] + }, + "LAYOUT_numbrero_ortho": { + "layout": [ + {"label":"K00", "x":0, "y":0}, + {"label":"K01", "x":1, "y":0}, + {"label":"K02", "x":2, "y":0}, + {"label":"K03", "x":3, "y":0}, + {"label":"K04", "x":4, "y":0}, + {"label":"K10", "x":0, "y":1, "h":1.5}, + {"label":"K11", "x":1, "y":1}, + {"label":"K12", "x":2, "y":1}, + {"label":"K13", "x":3, "y":1}, + {"label":"K14", "x":4, "y":1}, + {"label":"K20", "x":0, "y":2.5}, + {"label":"K21", "x":1, "y":2}, + {"label":"K22", "x":2, "y":2}, + {"label":"K23", "x":3, "y":2}, + {"label":"K24", "x":4, "y":2}, + {"label":"K30", "x":0, "y":3.5, "h":1.5}, + {"label":"K31", "x":1, "y":3}, + {"label":"K32", "x":2, "y":3}, + {"label":"K33", "x":3, "y":3}, + {"label":"K34", "x":4, "y":3}, + {"label":"K41", "x":1, "y":4}, + {"label":"K42", "x":2, "y":4}, + {"label":"K43", "x":3, "y":4}, + {"label":"K44", "x":4, "y":4} + ] + } + } +} diff --git a/keyboards/flehrad/numbrero/keymaps/default/keymap.c b/keyboards/flehrad/numbrero/keymaps/default/keymap.c new file mode 100644 index 000000000..903ed8d88 --- /dev/null +++ b/keyboards/flehrad/numbrero/keymaps/default/keymap.c @@ -0,0 +1,30 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_numbrero_numpad( + KC_TRNS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TRNS, KC_P7, KC_P8, KC_P9, + KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_TRNS, KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT), + + LAYOUT_numbrero_ortho( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + +}; + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} diff --git a/keyboards/flehrad/numbrero/license b/keyboards/flehrad/numbrero/license new file mode 100644 index 000000000..b09cd7856 --- /dev/null +++ b/keyboards/flehrad/numbrero/license @@ -0,0 +1,201 @@ +Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. diff --git a/keyboards/flehrad/numbrero/numbrero.c b/keyboards/flehrad/numbrero/numbrero.c new file mode 100644 index 000000000..d3ec36904 --- /dev/null +++ b/keyboards/flehrad/numbrero/numbrero.c @@ -0,0 +1 @@ +#include "numbrero.h" diff --git a/keyboards/flehrad/numbrero/numbrero.h b/keyboards/flehrad/numbrero/numbrero.h new file mode 100644 index 000000000..c72e65407 --- /dev/null +++ b/keyboards/flehrad/numbrero/numbrero.h @@ -0,0 +1,30 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_numbrero_numpad( \ + K00, K01, K02, K03, K04, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, K14, \ + K30, K31, K32, K33, \ + K41, K43, K34 \ +) { \ + { K00, K01, K02, K03, K04 }, \ + { K10, K11, K12, K13, K14 }, \ + { K20, K21, K22, K23, KC_NO }, \ + { K30, K31, K32, K33, K34 }, \ + { KC_NO, K41, KC_NO, K43, KC_NO } \ +} +#define LAYOUT_numbrero_ortho(\ + K00, K01, K02, K03, K04, \ + K10, K11, K12, K13, K14, \ + K20, K21, K22, K23, K24, \ + K30, K31, K32, K33, K34, \ + K41, K42, K43, K44 \ +){ \ + { K00, K01, K02, K03, K04 }, \ + { K10, K11, K12, K13, K14 }, \ + { K20, K21, K22, K23, K24 }, \ + { K30, K31, K32, K33, K34 }, \ + { KC_NO, K41, K42, K43, K44 } \ +} diff --git a/keyboards/flehrad/numbrero/readme.md b/keyboards/flehrad/numbrero/readme.md new file mode 100644 index 000000000..823a81fbe --- /dev/null +++ b/keyboards/flehrad/numbrero/readme.md @@ -0,0 +1,13 @@ +# Numbrero + +A reversible numpad (left/right-handed) with extra macro keys. + +Keyboard Maintainer: [Flehrad](https://github.com/flehrad) +Hardware Supported: Numbrero PCB, Pro Micro +Hardware Availability: The Board Podcast Slack + +Make example for this keyboard (after setting up your build environment): + + make flehrad/numbrero:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/flehrad/numbrero/rules.mk b/keyboards/flehrad/numbrero/rules.mk new file mode 100644 index 000000000..969dd0b50 --- /dev/null +++ b/keyboards/flehrad/numbrero/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no diff --git a/keyboards/flehrad/snagpad/config.h b/keyboards/flehrad/snagpad/config.h new file mode 100644 index 000000000..339bdd1be --- /dev/null +++ b/keyboards/flehrad/snagpad/config.h @@ -0,0 +1,49 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4443 // "DC" = Don Chiou +#define PRODUCT_ID 0x5350 // "SP" = Snagpad +#define DEVICE_VER 0x0001 +#define MANUFACTURER Flehrad +#define PRODUCT Snagpad +#define DESCRIPTION A Pro Micro-Powered 5x4 macropad/numpad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 } +#define MATRIX_COL_PINS { F4, F5, F6, F7 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* prevent stuck modifiers */ +//#define STRICT_LAYER_RELEASE + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/flehrad/snagpad/info.json b/keyboards/flehrad/snagpad/info.json new file mode 100644 index 000000000..6e3ab601a --- /dev/null +++ b/keyboards/flehrad/snagpad/info.json @@ -0,0 +1,56 @@ +{ + "keyboard_name": "Snagpad", + "url": "", + "maintainer": "Flehrad", + + "width": 4, + "height": 5, + "layouts": { + + "LAYOUT_ortho_5x4": { + "layout": [ + {"label":"Num Lock", "x":0, "y":0}, + {"label":"/", "x":1, "y":0}, + {"label":"*", "x":2, "y":0}, + {"label":"-", "x":3, "y":0}, + {"label":"7", "x":0, "y":1}, + {"label":"8", "x":1, "y":1}, + {"label":"9", "x":2, "y":1}, + {"label":"+", "x":3, "y":1}, + {"label":"4", "x":0, "y":2}, + {"label":"5", "x":1, "y":2}, + {"label":"6", "x":2, "y":2}, + {"label":"+", "x":3, "y":2}, + {"label":"1", "x":0, "y":3}, + {"label":"2", "x":1, "y":3}, + {"label":"3", "x":2, "y":3}, + {"label":"Enter", "x":3, "y":3}, + {"label":"0", "x":0, "y":4}, + {"label":"0", "x":1, "y":4}, + {"label":".", "x":2, "y":4}, + {"label":"Enter", "x":3, "y":4} + ] + }, + "LAYOUT_numpad_5x4": { + "layout": [ + {"label":"Num Lock", "x":0, "y":0}, + {"label":"/", "x":1, "y":0}, + {"label":"*", "x":2, "y":0}, + {"label":"-", "x":3, "y":0}, + {"label":"7", "x":0, "y":1}, + {"label":"8", "x":1, "y":1}, + {"label":"9", "x":2, "y":1}, + {"label":"4", "x":0, "y":2}, + {"label":"5", "x":1, "y":2}, + {"label":"6", "x":2, "y":2}, + {"label":"+", "x":3, "y":1, "h":2}, + {"label":"1", "x":0, "y":3}, + {"label":"2", "x":1, "y":3}, + {"label":"3", "x":2, "y":3}, + {"label":"0", "x":0, "y":4, "w":2}, + {"label":".", "x":2, "y":4}, + {"label":"Enter", "x":3, "y":3, "h":2} + ] + } + } +} diff --git a/keyboards/flehrad/snagpad/keymaps/default/keymap.c b/keyboards/flehrad/snagpad/keymaps/default/keymap.c new file mode 100644 index 000000000..7645b435c --- /dev/null +++ b/keyboards/flehrad/snagpad/keymaps/default/keymap.c @@ -0,0 +1,63 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_ortho_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), + + LAYOUT_numpad_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT), +}; + + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} diff --git a/keyboards/flehrad/snagpad/keymaps/via/keymap.c b/keyboards/flehrad/snagpad/keymaps/via/keymap.c new file mode 100644 index 000000000..7fa226de7 --- /dev/null +++ b/keyboards/flehrad/snagpad/keymaps/via/keymap.c @@ -0,0 +1,76 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), + + LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT_ortho_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} diff --git a/keyboards/flehrad/snagpad/keymaps/via/rules.mk b/keyboards/flehrad/snagpad/keymaps/via/rules.mk new file mode 100644 index 000000000..1e5b99807 --- /dev/null +++ b/keyboards/flehrad/snagpad/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/flehrad/snagpad/license b/keyboards/flehrad/snagpad/license new file mode 100644 index 000000000..261eeb9e9 --- /dev/null +++ b/keyboards/flehrad/snagpad/license @@ -0,0 +1,201 @@ + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. diff --git a/keyboards/flehrad/snagpad/readme.md b/keyboards/flehrad/snagpad/readme.md new file mode 100644 index 000000000..cefd65e57 --- /dev/null +++ b/keyboards/flehrad/snagpad/readme.md @@ -0,0 +1,21 @@ +# Snagpad + +A five-row PCB that can be built as a standard numpad or an ortholinear 5x4 macropad. Can be built as single PCB with custom case, or as two PCB style with standoffs. Requires a Pro Micro. + +Keyboard Maintainer: [Flehrad](https://github.com/flehrad) +Hardware Supported: Snagpad PCB, Pro Micro +Hardware Availability: [GitHub](https://github.com/flehrad/Snagpad) + +Make example for this keyboard (after setting up your build environment): + + make flehrad/snagpad:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +If you like this simple PCB and want to make a donation, you can do so at https://paypal.me/theboardpodcast. + +Check out our: + +- [YouTube](https://www.youtube.com/channel/UCg98oJZNffR9nDLJNkorjqw) +- [Podcast](https://podcasts.apple.com/au/podcast/theboard-mechanical-keyboard/id1147089749?mt=2) +- [Patreon](https://www.patreon.com/theboardpodcast) diff --git a/keyboards/flehrad/snagpad/rules.mk b/keyboards/flehrad/snagpad/rules.mk new file mode 100644 index 000000000..566a398fe --- /dev/null +++ b/keyboards/flehrad/snagpad/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no +LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/flehrad/snagpad/snagpad.c b/keyboards/flehrad/snagpad/snagpad.c new file mode 100644 index 000000000..ce7e50b38 --- /dev/null +++ b/keyboards/flehrad/snagpad/snagpad.c @@ -0,0 +1 @@ +#include "snagpad.h" diff --git a/keyboards/flehrad/snagpad/snagpad.h b/keyboards/flehrad/snagpad/snagpad.h new file mode 100644 index 000000000..f1e5e34e6 --- /dev/null +++ b/keyboards/flehrad/snagpad/snagpad.h @@ -0,0 +1,30 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_5x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33, \ + K40, K41, K42, K43 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 }, \ + { K40, K41, K42, K43 } \ +} +#define LAYOUT_numpad_5x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, \ + K20, K21, K22, K13, \ + K30, K31, K32, \ + K40, K42, K33 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, KC_NO }, \ + { K30, K31, K32, K33 }, \ + { K40, KC_NO, K42, KC_NO } \ +} diff --git a/keyboards/flehrad/tradestation/config.h b/keyboards/flehrad/tradestation/config.h new file mode 100644 index 000000000..33c87548f --- /dev/null +++ b/keyboards/flehrad/tradestation/config.h @@ -0,0 +1,46 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Flehrad +#define PRODUCT Trade Station + #define DESCRIPTION A Pro Micro-powered macropad layout by Didier Luximon. 1/8U gap space top two rows and 1/4U gap between 2U bottom two rows. + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D1, C6, D4, D0 } +#define MATRIX_COL_PINS { F7, B1, D7, E6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS + #define RGBLED_NUM 5 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/flehrad/tradestation/info.json b/keyboards/flehrad/tradestation/info.json new file mode 100644 index 000000000..233eb6282 --- /dev/null +++ b/keyboards/flehrad/tradestation/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Tradestation", + "url": "", + "maintainer": "Flehrad", + "width": 4.375, + "height": 4.5, + "layouts": { + "LAYOUT_tradestation": { + "layout": [{"x":0, "y":0},{"x":1.125, "y":0},{"x":2.25, "y":0},{"x":3.375, "y":0},{"x":0, "y":1.1},{"x":1.125, "y":1.1},{"x":2.25, "y":1.1},{"x":3.375, "y":1.1},{"x":0, "y":2.25, "w":2},{"x":2.25, "y":2.25, "w":2},{"x":0, "y":3.5, "w":2},{"x":2.25, "y":3.5, "w":2}] + }, + "LAYOUT_ortho_4x4": { + "layout": [{"x":0, "y":0},{"x":1.125, "y":0},{"x":2.25, "y":0},{"x":3.375, "y":0},{"x":0, "y":1.1},{"x":1.125, "y":1.1},{"x":2.25, "y":1.1},{"x":3.375, "y":1.1},{"x":0, "y":2.25},{"x":1.125, "y":2.25},{"x":2.25, "y":2.25},{"x":3.375, "y":2.25},{"x":0, "y":3.5},{"x":1.125, "y":3.5},{"x":2.25, "y":3.5},{"x":3.375, "y":3.5}] + } + } +} diff --git a/keyboards/flehrad/tradestation/keymaps/default/keymap.c b/keyboards/flehrad/tradestation/keymaps/default/keymap.c new file mode 100644 index 000000000..3497dcb94 --- /dev/null +++ b/keyboards/flehrad/tradestation/keymaps/default/keymap.c @@ -0,0 +1,61 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_ortho_4x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + LAYOUT_tradestation( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS), +}; + + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} diff --git a/keyboards/flehrad/tradestation/license b/keyboards/flehrad/tradestation/license new file mode 100644 index 000000000..261eeb9e9 --- /dev/null +++ b/keyboards/flehrad/tradestation/license @@ -0,0 +1,201 @@ + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. diff --git a/keyboards/flehrad/tradestation/readme.md b/keyboards/flehrad/tradestation/readme.md new file mode 100644 index 000000000..d2a9c4d18 --- /dev/null +++ b/keyboards/flehrad/tradestation/readme.md @@ -0,0 +1,27 @@ +# Tradestation + +[Image Gallery](https://imgur.com/a/yxQJXMT) + +A 4x4 ortholinear macropad, with options for 2U keys on the bottom half. Can be built as single PCB with custom case, or as two-PCB style with standoffs. Requires a Pro Micro. + +This PCB supports an overall 4x4 matrix with unique spacing. + +* Top two rows are 1U keys with 1/8U spacing +* Bottom two rows are available with 4x2 1U as clusters of 2x1U or as 2x2 2U, spaced with 1/4U + +If you like this simple PCB and want to make a donation, you can do so at [paypal.me/theboardpodcast](https://paypal.me/theboardpodcast). + +- [The Board Podcast on YouTube](https://www.youtube.com/channel/UCg98oJZNffR9nDLJNkorjqw) +- [The Board Podcast on Libsyn](http://theboard.libsyn.com/) +- [The Board Podcast on Patreon](https://www.patreon.com/theboardpodcast) + +Designed by Didier Luximon. + +Keyboard Maintainer: [flehrad](https://github.com/flehrad) +Hardware Supported: Tradestation PCB, Pro Micro + +Make example for this keyboard (after setting up your build environment): + + make flehrad/tradestation:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/flehrad/tradestation/rules.mk b/keyboards/flehrad/tradestation/rules.mk new file mode 100644 index 000000000..d3612c3c2 --- /dev/null +++ b/keyboards/flehrad/tradestation/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no + +LAYOUTS = ortho_4x4 diff --git a/keyboards/flehrad/tradestation/tradestation.c b/keyboards/flehrad/tradestation/tradestation.c new file mode 100644 index 000000000..a3285a2cc --- /dev/null +++ b/keyboards/flehrad/tradestation/tradestation.c @@ -0,0 +1 @@ +#include "tradestation.h" diff --git a/keyboards/flehrad/tradestation/tradestation.h b/keyboards/flehrad/tradestation/tradestation.h new file mode 100644 index 000000000..60b53b7dd --- /dev/null +++ b/keyboards/flehrad/tradestation/tradestation.h @@ -0,0 +1,27 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_4x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 } \ +} + +#define LAYOUT_tradestation( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K22, \ + K30, K32 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, KC_NO, K22, KC_NO }, \ + { K30, KC_NO, K32, KC_NO } \ +} -- cgit v1.2.3-70-g09d2 From 78d5224a1d89f97c519fd6410216d6cc408f931f Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Mon, 7 Sep 2020 22:28:18 -0700 Subject: Remove HD44780 References, Part 3 (#10238) * remove HD44780_ENABLE rules: G-H * remove HD44780_ENABLE config: G-H --- keyboards/flehrad/downbubble/config.h | 28 ------------------------ keyboards/flehrad/downbubble/rules.mk | 1 - keyboards/gami_studio/lex60/rules.mk | 1 - keyboards/gingham/config.h | 27 ----------------------- keyboards/gingham/rules.mk | 1 - keyboards/gon/nerd60/keymaps/mauin/rules.mk | 1 - keyboards/gon/nerd60/rules.mk | 1 - keyboards/gon/nerdtkl/keymaps/gam3cat/rules.mk | 1 - keyboards/gon/nerdtkl/rules.mk | 1 - keyboards/gray_studio/space65/config.h | 28 ------------------------ keyboards/gray_studio/space65/rules.mk | 1 - keyboards/gray_studio/think65/hotswap/rules.mk | 1 - keyboards/gray_studio/think65/solder/rules.mk | 1 - keyboards/grid600/press/rules.mk | 1 - keyboards/halberd/config.h | 28 ------------------------ keyboards/halberd/rules.mk | 1 - keyboards/handwired/108key_trackpoint/rules.mk | 1 - keyboards/handwired/412_64/config.h | 27 ----------------------- keyboards/handwired/412_64/rules.mk | 3 +-- keyboards/handwired/42/rules.mk | 1 - keyboards/handwired/6macro/rules.mk | 1 - keyboards/handwired/aplx2/rules.mk | 1 - keyboards/handwired/aranck/config.h | 28 ------------------------ keyboards/handwired/aranck/rules.mk | 1 - keyboards/handwired/bdn9_ble/rules.mk | 1 - keyboards/handwired/cans12er/rules.mk | 1 - keyboards/handwired/chiron/rules.mk | 1 - keyboards/handwired/colorlice/rules.mk | 1 - keyboards/handwired/dactyl_left/config.h | 28 ------------------------ keyboards/handwired/dactyl_left/rules.mk | 1 - keyboards/handwired/fc200rt_qmk/rules.mk | 1 - keyboards/handwired/floorboard/config.h | 28 ------------------------ keyboards/handwired/floorboard/rules.mk | 1 - keyboards/handwired/hacked_motospeed/config.h | 28 ------------------------ keyboards/handwired/hacked_motospeed/rules.mk | 1 - keyboards/handwired/heisenberg/config.h | 28 ------------------------ keyboards/handwired/heisenberg/rules.mk | 1 - keyboards/handwired/hnah108/config.h | 27 ----------------------- keyboards/handwired/hnah108/rules.mk | 1 - keyboards/handwired/hnah40/config.h | 28 ------------------------ keyboards/handwired/hnah40/rules.mk | 1 - keyboards/handwired/hnah40rgb/rules.mk | 1 - keyboards/handwired/jn68m/rules.mk | 1 - keyboards/handwired/jtallbean/split_65/config.h | 28 ------------------------ keyboards/handwired/jtallbean/split_65/rules.mk | 1 - keyboards/handwired/mechboards_micropad/config.h | 28 ------------------------ keyboards/handwired/mechboards_micropad/rules.mk | 1 - keyboards/handwired/minorca/rules.mk | 1 - keyboards/handwired/novem/rules.mk | 1 - keyboards/handwired/onekey/rules.mk | 1 - keyboards/handwired/owlet60/config.h | 28 ------------------------ keyboards/handwired/owlet60/rules.mk | 1 - keyboards/handwired/p1800fl/rules.mk | 1 - keyboards/handwired/p65rgb/rules.mk | 1 - keyboards/handwired/postageboard/mini/rules.mk | 1 - keyboards/handwired/postageboard/r1/rules.mk | 1 - keyboards/handwired/prime_exl/rules.mk | 1 - keyboards/handwired/prime_exl_plus/rules.mk | 1 - keyboards/handwired/sick68/config.h | 28 ------------------------ keyboards/handwired/sick68/rules.mk | 1 - keyboards/handwired/slash/rules.mk | 1 - keyboards/handwired/sticc14/config.h | 28 ------------------------ keyboards/handwired/sticc14/rules.mk | 1 - keyboards/handwired/symmetry60/rules.mk | 1 - keyboards/handwired/tennie/config.h | 28 ------------------------ keyboards/handwired/tennie/rules.mk | 1 - keyboards/handwired/twadlee/tp69/config.h | 28 ------------------------ keyboards/handwired/twadlee/tp69/rules.mk | 1 - keyboards/handwired/videowriter/rules.mk | 1 - keyboards/handwired/wulkan/rules.mk | 1 - keyboards/hecomi/alpha/config.h | 28 ------------------------ keyboards/hecomi/alpha/rules.mk | 1 - keyboards/hecomi/rules.mk | 1 - keyboards/hineybush/h75_singa/config.h | 28 ------------------------ keyboards/hineybush/h75_singa/rules.mk | 1 - keyboards/hineybush/hbcp/rules.mk | 1 - keyboards/hineybush/hineyg80/rules.mk | 1 - keyboards/hineybush/physix/config.h | 28 ------------------------ keyboards/hineybush/physix/rules.mk | 1 - keyboards/hineybush/sm68/config.h | 28 ------------------------ keyboards/hineybush/sm68/rules.mk | 1 - keyboards/hub16/rules.mk | 1 - 82 files changed, 1 insertion(+), 701 deletions(-) (limited to 'keyboards/flehrad') diff --git a/keyboards/flehrad/downbubble/config.h b/keyboards/flehrad/downbubble/config.h index f2628cb70..04fbc4a0d 100644 --- a/keyboards/flehrad/downbubble/config.h +++ b/keyboards/flehrad/downbubble/config.h @@ -207,34 +207,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/flehrad/downbubble/rules.mk b/keyboards/flehrad/downbubble/rules.mk index 189b82720..39fa656c6 100644 --- a/keyboards/flehrad/downbubble/rules.mk +++ b/keyboards/flehrad/downbubble/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/gami_studio/lex60/rules.mk b/keyboards/gami_studio/lex60/rules.mk index 3b7f4dbd5..84bbccfba 100644 --- a/keyboards/gami_studio/lex60/rules.mk +++ b/keyboards/gami_studio/lex60/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/gingham/config.h b/keyboards/gingham/config.h index 653c0f627..0c4d4c97a 100644 --- a/keyboards/gingham/config.h +++ b/keyboards/gingham/config.h @@ -213,30 +213,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk index e1046c017..c4e36e877 100644 --- a/keyboards/gingham/rules.mk +++ b/keyboards/gingham/rules.mk @@ -33,6 +33,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs CUSTOM_MATRIX = lite diff --git a/keyboards/gon/nerd60/keymaps/mauin/rules.mk b/keyboards/gon/nerd60/keymaps/mauin/rules.mk index 625fc9c02..6094ff660 100644 --- a/keyboards/gon/nerd60/keymaps/mauin/rules.mk +++ b/keyboards/gon/nerd60/keymaps/mauin/rules.mk @@ -17,4 +17,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/gon/nerd60/rules.mk b/keyboards/gon/nerd60/rules.mk index 8446dd39c..74fd4fcc3 100644 --- a/keyboards/gon/nerd60/rules.mk +++ b/keyboards/gon/nerd60/rules.mk @@ -33,4 +33,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/gon/nerdtkl/keymaps/gam3cat/rules.mk b/keyboards/gon/nerdtkl/keymaps/gam3cat/rules.mk index 65c2a5d62..e827f5072 100644 --- a/keyboards/gon/nerdtkl/keymaps/gam3cat/rules.mk +++ b/keyboards/gon/nerdtkl/keymaps/gam3cat/rules.mk @@ -18,7 +18,6 @@ UNICODEMAP_ENABLE = no # Enable extended unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs #VARIABLE_TRACE = no # Use this to debug changes to variable values API_SYSEX_ENABLE = no # This enables using the Quantum SYSEX API to send strings KEY_LOCK_ENABLE = no # This enables key lock diff --git a/keyboards/gon/nerdtkl/rules.mk b/keyboards/gon/nerdtkl/rules.mk index 8446dd39c..74fd4fcc3 100644 --- a/keyboards/gon/nerdtkl/rules.mk +++ b/keyboards/gon/nerdtkl/rules.mk @@ -33,4 +33,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/gray_studio/space65/config.h b/keyboards/gray_studio/space65/config.h index 0485afca4..2e3928e69 100644 --- a/keyboards/gray_studio/space65/config.h +++ b/keyboards/gray_studio/space65/config.h @@ -211,34 +211,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/gray_studio/space65/rules.mk b/keyboards/gray_studio/space65/rules.mk index 887d870a6..b882a3a19 100644 --- a/keyboards/gray_studio/space65/rules.mk +++ b/keyboards/gray_studio/space65/rules.mk @@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs LAYOUTS = 65_ansi_blocker 65_iso_blocker diff --git a/keyboards/gray_studio/think65/hotswap/rules.mk b/keyboards/gray_studio/think65/hotswap/rules.mk index 5f85ff18a..dac30fa9f 100644 --- a/keyboards/gray_studio/think65/hotswap/rules.mk +++ b/keyboards/gray_studio/think65/hotswap/rules.mk @@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs LTO_ENABLE = yes diff --git a/keyboards/gray_studio/think65/solder/rules.mk b/keyboards/gray_studio/think65/solder/rules.mk index 5f85ff18a..dac30fa9f 100644 --- a/keyboards/gray_studio/think65/solder/rules.mk +++ b/keyboards/gray_studio/think65/solder/rules.mk @@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs LTO_ENABLE = yes diff --git a/keyboards/grid600/press/rules.mk b/keyboards/grid600/press/rules.mk index 2d9a649e0..17c51ec37 100644 --- a/keyboards/grid600/press/rules.mk +++ b/keyboards/grid600/press/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/halberd/config.h b/keyboards/halberd/config.h index 57e29e858..746375b70 100644 --- a/keyboards/halberd/config.h +++ b/keyboards/halberd/config.h @@ -188,34 +188,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/halberd/rules.mk b/keyboards/halberd/rules.mk index 145d1f322..28e6adcc2 100644 --- a/keyboards/halberd/rules.mk +++ b/keyboards/halberd/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/108key_trackpoint/rules.mk b/keyboards/handwired/108key_trackpoint/rules.mk index 2a8ed6af1..848c79fe3 100644 --- a/keyboards/handwired/108key_trackpoint/rules.mk +++ b/keyboards/handwired/108key_trackpoint/rules.mk @@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) PS2_MOUSE_ENABLE = yes PS2_USE_USART = yes diff --git a/keyboards/handwired/412_64/config.h b/keyboards/handwired/412_64/config.h index cce38f3e6..4acda46fd 100644 --- a/keyboards/handwired/412_64/config.h +++ b/keyboards/handwired/412_64/config.h @@ -165,30 +165,3 @@ /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/handwired/412_64/rules.mk b/keyboards/handwired/412_64/rules.mk index c7dfa8705..de611b460 100644 --- a/keyboards/handwired/412_64/rules.mk +++ b/keyboards/handwired/412_64/rules.mk @@ -29,6 +29,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -LAYOUTS = ortho_4x16 +LAYOUTS = ortho_4x16 diff --git a/keyboards/handwired/42/rules.mk b/keyboards/handwired/42/rules.mk index f2306f310..183d4db0c 100644 --- a/keyboards/handwired/42/rules.mk +++ b/keyboards/handwired/42/rules.mk @@ -31,7 +31,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = no # ^^ diff --git a/keyboards/handwired/6macro/rules.mk b/keyboards/handwired/6macro/rules.mk index 13760ae06..9add0e5a5 100644 --- a/keyboards/handwired/6macro/rules.mk +++ b/keyboards/handwired/6macro/rules.mk @@ -31,4 +31,3 @@ UNICODE_ENABLE = yes # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/handwired/aplx2/rules.mk b/keyboards/handwired/aplx2/rules.mk index af9df6087..38c15fafe 100644 --- a/keyboards/handwired/aplx2/rules.mk +++ b/keyboards/handwired/aplx2/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/aranck/config.h b/keyboards/handwired/aranck/config.h index 0de56cc3b..f07f20738 100644 --- a/keyboards/handwired/aranck/config.h +++ b/keyboards/handwired/aranck/config.h @@ -229,34 +229,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/aranck/rules.mk b/keyboards/handwired/aranck/rules.mk index a6809de9d..b41c39374 100644 --- a/keyboards/handwired/aranck/rules.mk +++ b/keyboards/handwired/aranck/rules.mk @@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs LAYOUTS = planck_mit \ No newline at end of file diff --git a/keyboards/handwired/bdn9_ble/rules.mk b/keyboards/handwired/bdn9_ble/rules.mk index 4fabf1c89..48cc9d5f0 100644 --- a/keyboards/handwired/bdn9_ble/rules.mk +++ b/keyboards/handwired/bdn9_ble/rules.mk @@ -33,5 +33,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH = AdafruitBLE # Enable Bluetooth AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs ENCODER_ENABLE = no diff --git a/keyboards/handwired/cans12er/rules.mk b/keyboards/handwired/cans12er/rules.mk index c6675b615..84bb4e82d 100644 --- a/keyboards/handwired/cans12er/rules.mk +++ b/keyboards/handwired/cans12er/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs \ No newline at end of file diff --git a/keyboards/handwired/chiron/rules.mk b/keyboards/handwired/chiron/rules.mk index 96f642270..85aff72cb 100644 --- a/keyboards/handwired/chiron/rules.mk +++ b/keyboards/handwired/chiron/rules.mk @@ -24,7 +24,6 @@ CONSOLE_ENABLE = no DEBUG_ENABLE = no EXTRAKEY_ENABLE = no FAUXCLICKY_ENABLE = no -HD44780_ENABLE = no LEADER_ENABLE = no MIDI_ENABLE = no MOUSEKEY_ENABLE = yes diff --git a/keyboards/handwired/colorlice/rules.mk b/keyboards/handwired/colorlice/rules.mk index 02da465d3..f41304b2a 100644 --- a/keyboards/handwired/colorlice/rules.mk +++ b/keyboards/handwired/colorlice/rules.mk @@ -29,7 +29,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs LTO_ENABLE = no # Use link time optimization RGB_MATRIX_ENABLE = WS2812 # Enable keyboard RGB backlight functionality with ws2812 driver RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow diff --git a/keyboards/handwired/dactyl_left/config.h b/keyboards/handwired/dactyl_left/config.h index 43c0d3d43..e3924b96a 100644 --- a/keyboards/handwired/dactyl_left/config.h +++ b/keyboards/handwired/dactyl_left/config.h @@ -218,34 +218,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/dactyl_left/rules.mk b/keyboards/handwired/dactyl_left/rules.mk index 1ea1de18d..f29d5333c 100644 --- a/keyboards/handwired/dactyl_left/rules.mk +++ b/keyboards/handwired/dactyl_left/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/handwired/fc200rt_qmk/rules.mk b/keyboards/handwired/fc200rt_qmk/rules.mk index 8ef9dbd6c..5e832358b 100644 --- a/keyboards/handwired/fc200rt_qmk/rules.mk +++ b/keyboards/handwired/fc200rt_qmk/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/floorboard/config.h b/keyboards/handwired/floorboard/config.h index bf8646f39..12ab4387f 100644 --- a/keyboards/handwired/floorboard/config.h +++ b/keyboards/handwired/floorboard/config.h @@ -218,34 +218,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/floorboard/rules.mk b/keyboards/handwired/floorboard/rules.mk index 16f3332aa..5a83cfcf9 100644 --- a/keyboards/handwired/floorboard/rules.mk +++ b/keyboards/handwired/floorboard/rules.mk @@ -19,5 +19,4 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs LAYOUTS = ortho_4x12 diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h index 0035a5e28..eba87164f 100644 --- a/keyboards/handwired/hacked_motospeed/config.h +++ b/keyboards/handwired/hacked_motospeed/config.h @@ -215,34 +215,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk index 7cb9e914e..291da87cf 100644 --- a/keyboards/handwired/hacked_motospeed/rules.mk +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in BLUETOOTH = RN42 diff --git a/keyboards/handwired/heisenberg/config.h b/keyboards/handwired/heisenberg/config.h index 9fe57cbeb..34458b492 100644 --- a/keyboards/handwired/heisenberg/config.h +++ b/keyboards/handwired/heisenberg/config.h @@ -229,34 +229,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/heisenberg/rules.mk b/keyboards/handwired/heisenberg/rules.mk index 2fd710029..10046d710 100644 --- a/keyboards/handwired/heisenberg/rules.mk +++ b/keyboards/handwired/heisenberg/rules.mk @@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs LAYOUTS = planck_mit diff --git a/keyboards/handwired/hnah108/config.h b/keyboards/handwired/hnah108/config.h index b2d84e3e3..a0c20706b 100644 --- a/keyboards/handwired/hnah108/config.h +++ b/keyboards/handwired/hnah108/config.h @@ -216,30 +216,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ diff --git a/keyboards/handwired/hnah108/rules.mk b/keyboards/handwired/hnah108/rules.mk index 8e486c594..fa28a1cce 100644 --- a/keyboards/handwired/hnah108/rules.mk +++ b/keyboards/handwired/hnah108/rules.mk @@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) ENCODER_ENABLE = yes RGB_MATRIX_ENABLE = WS2812 diff --git a/keyboards/handwired/hnah40/config.h b/keyboards/handwired/hnah40/config.h index 9583c4c38..6138d2e3e 100644 --- a/keyboards/handwired/hnah40/config.h +++ b/keyboards/handwired/hnah40/config.h @@ -192,31 +192,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - diff --git a/keyboards/handwired/hnah40/rules.mk b/keyboards/handwired/hnah40/rules.mk index 0df52f7de..39d9374de 100644 --- a/keyboards/handwired/hnah40/rules.mk +++ b/keyboards/handwired/hnah40/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/handwired/hnah40rgb/rules.mk b/keyboards/handwired/hnah40rgb/rules.mk index 5ad9f40c3..658a74d14 100644 --- a/keyboards/handwired/hnah40rgb/rules.mk +++ b/keyboards/handwired/hnah40rgb/rules.mk @@ -29,5 +29,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs RGB_MATRIX_ENABLE = WS2812 \ No newline at end of file diff --git a/keyboards/handwired/jn68m/rules.mk b/keyboards/handwired/jn68m/rules.mk index 80b59d628..f07380121 100644 --- a/keyboards/handwired/jn68m/rules.mk +++ b/keyboards/handwired/jn68m/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/handwired/jtallbean/split_65/config.h b/keyboards/handwired/jtallbean/split_65/config.h index 5c7a9d54b..06c569f9f 100644 --- a/keyboards/handwired/jtallbean/split_65/config.h +++ b/keyboards/handwired/jtallbean/split_65/config.h @@ -221,34 +221,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/jtallbean/split_65/rules.mk b/keyboards/handwired/jtallbean/split_65/rules.mk index d868f5e77..7f96d7832 100644 --- a/keyboards/handwired/jtallbean/split_65/rules.mk +++ b/keyboards/handwired/jtallbean/split_65/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs SPLIT_KEYBOARD = yes # Enable split keyboard support diff --git a/keyboards/handwired/mechboards_micropad/config.h b/keyboards/handwired/mechboards_micropad/config.h index 8f237a64a..30775ac8f 100644 --- a/keyboards/handwired/mechboards_micropad/config.h +++ b/keyboards/handwired/mechboards_micropad/config.h @@ -212,34 +212,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/mechboards_micropad/rules.mk b/keyboards/handwired/mechboards_micropad/rules.mk index a61b3b3d8..01cefabcc 100644 --- a/keyboards/handwired/mechboards_micropad/rules.mk +++ b/keyboards/handwired/mechboards_micropad/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk index 195749ceb..e9e9fc84b 100644 --- a/keyboards/handwired/minorca/rules.mk +++ b/keyboards/handwired/minorca/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/novem/rules.mk b/keyboards/handwired/novem/rules.mk index 3891651f3..e7acaabf8 100644 --- a/keyboards/handwired/novem/rules.mk +++ b/keyboards/handwired/novem/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/onekey/rules.mk b/keyboards/handwired/onekey/rules.mk index 8ed255768..968e338e2 100644 --- a/keyboards/handwired/onekey/rules.mk +++ b/keyboards/handwired/onekey/rules.mk @@ -17,7 +17,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) DEFAULT_FOLDER = handwired/onekey/promicro LAYOUTS = ortho_1x1 diff --git a/keyboards/handwired/owlet60/config.h b/keyboards/handwired/owlet60/config.h index 29fd0b1e5..0bcc8f20e 100644 --- a/keyboards/handwired/owlet60/config.h +++ b/keyboards/handwired/owlet60/config.h @@ -217,34 +217,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/owlet60/rules.mk b/keyboards/handwired/owlet60/rules.mk index 6c81dad09..c3c94c91d 100644 --- a/keyboards/handwired/owlet60/rules.mk +++ b/keyboards/handwired/owlet60/rules.mk @@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) CUSTOM_MATRIX = yes OLED_DRIVER_ENABLE = no diff --git a/keyboards/handwired/p1800fl/rules.mk b/keyboards/handwired/p1800fl/rules.mk index b8601f0f1..60ec4f699 100644 --- a/keyboards/handwired/p1800fl/rules.mk +++ b/keyboards/handwired/p1800fl/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/p65rgb/rules.mk b/keyboards/handwired/p65rgb/rules.mk index 297aa1cd7..5eeaf976c 100644 --- a/keyboards/handwired/p65rgb/rules.mk +++ b/keyboards/handwired/p65rgb/rules.mk @@ -30,4 +30,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/postageboard/mini/rules.mk b/keyboards/handwired/postageboard/mini/rules.mk index 96e8e574c..bd7866ecf 100644 --- a/keyboards/handwired/postageboard/mini/rules.mk +++ b/keyboards/handwired/postageboard/mini/rules.mk @@ -26,4 +26,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/postageboard/r1/rules.mk b/keyboards/handwired/postageboard/r1/rules.mk index 96e8e574c..bd7866ecf 100644 --- a/keyboards/handwired/postageboard/r1/rules.mk +++ b/keyboards/handwired/postageboard/r1/rules.mk @@ -26,4 +26,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/prime_exl/rules.mk b/keyboards/handwired/prime_exl/rules.mk index d7aca43df..a535e2e8c 100644 --- a/keyboards/handwired/prime_exl/rules.mk +++ b/keyboards/handwired/prime_exl/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/handwired/prime_exl_plus/rules.mk b/keyboards/handwired/prime_exl_plus/rules.mk index c0493d993..53e9616cc 100644 --- a/keyboards/handwired/prime_exl_plus/rules.mk +++ b/keyboards/handwired/prime_exl_plus/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/sick68/config.h b/keyboards/handwired/sick68/config.h index 9f050c361..c61eb7eaf 100644 --- a/keyboards/handwired/sick68/config.h +++ b/keyboards/handwired/sick68/config.h @@ -220,34 +220,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/sick68/rules.mk b/keyboards/handwired/sick68/rules.mk index f90c4cf21..fa2740ae6 100644 --- a/keyboards/handwired/sick68/rules.mk +++ b/keyboards/handwired/sick68/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs LAYOUTS = 65_ansi diff --git a/keyboards/handwired/slash/rules.mk b/keyboards/handwired/slash/rules.mk index 092115db1..5c2cc5d97 100644 --- a/keyboards/handwired/slash/rules.mk +++ b/keyboards/handwired/slash/rules.mk @@ -34,4 +34,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH = AdafruitBLE AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/sticc14/config.h b/keyboards/handwired/sticc14/config.h index 22011f078..30516477d 100644 --- a/keyboards/handwired/sticc14/config.h +++ b/keyboards/handwired/sticc14/config.h @@ -216,34 +216,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/sticc14/rules.mk b/keyboards/handwired/sticc14/rules.mk index 7b326cc31..99931790c 100644 --- a/keyboards/handwired/sticc14/rules.mk +++ b/keyboards/handwired/sticc14/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/symmetry60/rules.mk b/keyboards/handwired/symmetry60/rules.mk index 6830cc690..c7ec2f8d0 100644 --- a/keyboards/handwired/symmetry60/rules.mk +++ b/keyboards/handwired/symmetry60/rules.mk @@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs LTO_ENABLE = yes # Use link time optimization LAYOUTS = ortho_5x14 diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h index d26cb4c61..ca92c8e8c 100644 --- a/keyboards/handwired/tennie/config.h +++ b/keyboards/handwired/tennie/config.h @@ -207,34 +207,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ //#define BOOTMAGIC_LITE_ROW 0 //#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk index b41b736a7..a404294f1 100644 --- a/keyboards/handwired/tennie/rules.mk +++ b/keyboards/handwired/tennie/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/handwired/twadlee/tp69/config.h b/keyboards/handwired/twadlee/tp69/config.h index 4da7d2560..d6f28bdc1 100644 --- a/keyboards/handwired/twadlee/tp69/config.h +++ b/keyboards/handwired/twadlee/tp69/config.h @@ -220,34 +220,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/twadlee/tp69/rules.mk b/keyboards/handwired/twadlee/tp69/rules.mk index 967060802..ec1da3632 100644 --- a/keyboards/handwired/twadlee/tp69/rules.mk +++ b/keyboards/handwired/twadlee/tp69/rules.mk @@ -19,7 +19,6 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs PS2_MOUSE_ENABLE = no USE_CHIBIOS_CONTRIB = yes diff --git a/keyboards/handwired/videowriter/rules.mk b/keyboards/handwired/videowriter/rules.mk index 7b326cc31..99931790c 100644 --- a/keyboards/handwired/videowriter/rules.mk +++ b/keyboards/handwired/videowriter/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/handwired/wulkan/rules.mk b/keyboards/handwired/wulkan/rules.mk index f432c7d67..25bb40269 100644 --- a/keyboards/handwired/wulkan/rules.mk +++ b/keyboards/handwired/wulkan/rules.mk @@ -18,6 +18,5 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) NO_SUSPEND_POWER_DOWN = yes UNICODEMAP_ENABLE = no diff --git a/keyboards/hecomi/alpha/config.h b/keyboards/hecomi/alpha/config.h index 3600eb717..741fdd5ca 100644 --- a/keyboards/hecomi/alpha/config.h +++ b/keyboards/hecomi/alpha/config.h @@ -207,34 +207,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hecomi/alpha/rules.mk b/keyboards/hecomi/alpha/rules.mk index 0f0b632b1..12b5a001b 100644 --- a/keyboards/hecomi/alpha/rules.mk +++ b/keyboards/hecomi/alpha/rules.mk @@ -30,5 +30,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs SPLIT_KEYBOARD = yes diff --git a/keyboards/hecomi/rules.mk b/keyboards/hecomi/rules.mk index ad2178e9e..c23c51a59 100644 --- a/keyboards/hecomi/rules.mk +++ b/keyboards/hecomi/rules.mk @@ -30,7 +30,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs SPLIT_KEYBOARD = yes DEFAULT_FOLDER = hecomi/alpha diff --git a/keyboards/hineybush/h75_singa/config.h b/keyboards/hineybush/h75_singa/config.h index 82222e29c..187fc791f 100644 --- a/keyboards/hineybush/h75_singa/config.h +++ b/keyboards/hineybush/h75_singa/config.h @@ -212,34 +212,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h75_singa/rules.mk b/keyboards/hineybush/h75_singa/rules.mk index 92ad960cb..d676e0f70 100644 --- a/keyboards/hineybush/h75_singa/rules.mk +++ b/keyboards/hineybush/h75_singa/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/hineybush/hbcp/rules.mk b/keyboards/hineybush/hbcp/rules.mk index 1e973bc85..e186b39cf 100644 --- a/keyboards/hineybush/hbcp/rules.mk +++ b/keyboards/hineybush/hbcp/rules.mk @@ -30,6 +30,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/hineybush/hineyg80/rules.mk b/keyboards/hineybush/hineyg80/rules.mk index 1aa337931..77d0f1ec1 100644 --- a/keyboards/hineybush/hineyg80/rules.mk +++ b/keyboards/hineybush/hineyg80/rules.mk @@ -30,4 +30,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/hineybush/physix/config.h b/keyboards/hineybush/physix/config.h index ccdb18fd2..d705efefa 100644 --- a/keyboards/hineybush/physix/config.h +++ b/keyboards/hineybush/physix/config.h @@ -218,34 +218,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/physix/rules.mk b/keyboards/hineybush/physix/rules.mk index 010cb024d..20b1e9e5d 100644 --- a/keyboards/hineybush/physix/rules.mk +++ b/keyboards/hineybush/physix/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/hineybush/sm68/config.h b/keyboards/hineybush/sm68/config.h index f41f5bc2d..cdb22aee7 100644 --- a/keyboards/hineybush/sm68/config.h +++ b/keyboards/hineybush/sm68/config.h @@ -208,34 +208,6 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/sm68/rules.mk b/keyboards/hineybush/sm68/rules.mk index 28e24020a..a7e841a7c 100644 --- a/keyboards/hineybush/sm68/rules.mk +++ b/keyboards/hineybush/sm68/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/hub16/rules.mk b/keyboards/hub16/rules.mk index ad1e23860..b050dcf42 100755 --- a/keyboards/hub16/rules.mk +++ b/keyboards/hub16/rules.mk @@ -31,7 +31,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs ENCODER_ENABLE = yes # Rotary Encoder support TAP_DANCE_ENABLE = yes # Support for tap dancing -- cgit v1.2.3-70-g09d2 From 940280c43594833e2208d8514452b8ab88c14a9c Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Wed, 23 Sep 2020 18:52:04 -0700 Subject: VIA Support for flehrad Big Switch (#10325) * add VIA keymap * Update keyboards/flehrad/bigswitch/keymaps/via/keymap.c --- keyboards/flehrad/bigswitch/keymaps/via/keymap.c | 29 ++++++++++++++++++++++++ keyboards/flehrad/bigswitch/keymaps/via/rules.mk | 2 ++ 2 files changed, 31 insertions(+) create mode 100644 keyboards/flehrad/bigswitch/keymaps/via/keymap.c create mode 100644 keyboards/flehrad/bigswitch/keymaps/via/rules.mk (limited to 'keyboards/flehrad') diff --git a/keyboards/flehrad/bigswitch/keymaps/via/keymap.c b/keyboards/flehrad/bigswitch/keymaps/via/keymap.c new file mode 100644 index 000000000..f253f4b12 --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/via/keymap.c @@ -0,0 +1,29 @@ +/* +Copyright 2020 MechMerlin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT(KC_TRNS), + + [1] = LAYOUT(KC_TRNS), + + [2] = LAYOUT(KC_TRNS), + + [3] = LAYOUT(KC_TRNS) +}; diff --git a/keyboards/flehrad/bigswitch/keymaps/via/rules.mk b/keyboards/flehrad/bigswitch/keymaps/via/rules.mk new file mode 100644 index 000000000..36b7ba9cb --- /dev/null +++ b/keyboards/flehrad/bigswitch/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes -- cgit v1.2.3-70-g09d2 From 1aacbc44d18a1d23c58561ee17498618a1e6319d Mon Sep 17 00:00:00 2001 From: Fred Silberberg Date: Sun, 4 Oct 2020 12:24:35 -0700 Subject: [Keymap] Added 333fred 5x6_5 keymap (#10272) * First pass at manuform layout. * Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer. * Use a 32-bit timer that can actually hit 5 minutes. * Some updates after a day of usage: * Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes. * Turn off the OLEDs after 5 minutes * Move the keys around a bit. * Add many more quotes. * Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots. * Revert osm on lgui as it makes start menu search impossible to use. * Use LTO_ENABLE flag. * License all of my (333fred's) keymaps as MIT. * Update users/333fred/rgb.c Co-authored-by: Ryan Co-authored-by: Ryan --- keyboards/ergodash/rev1/keymaps/333fred/config.h | 22 + keyboards/ergodash/rev1/keymaps/333fred/keymap.c | 22 + .../flehrad/bigswitch/keymaps/333fred/config.h | 28 +- .../flehrad/bigswitch/keymaps/333fred/keymap.c | 22 + .../dactyl_manuform/5x6/keymaps/333fred/config.h | 22 + .../dactyl_manuform/5x6/keymaps/333fred/keymap.c | 22 + .../dactyl_manuform/5x6_5/keymaps/333fred/config.h | 40 ++ .../dactyl_manuform/5x6_5/keymaps/333fred/keymap.c | 579 +++++++++++++++++++++ .../dactyl_manuform/5x6_5/keymaps/333fred/rules.mk | 4 + keyboards/keebio/iris/keymaps/333fred/config.h | 22 + keyboards/keebio/iris/keymaps/333fred/keymap.c | 22 + keyboards/naked60/keymaps/333fred/keymap.c | 22 + keyboards/rgbkb/zen/rev1/keymaps/333fred/config.h | 33 +- keyboards/rgbkb/zen/rev1/keymaps/333fred/keymap.c | 22 + layouts/community/ergodox/333fred/config.h | 22 + layouts/community/ergodox/333fred/keymap.c | 22 + layouts/community/ortho_5x12/333fred/config.h | 22 + layouts/community/ortho_5x12/333fred/keymap.c | 22 + users/333fred/333fred.c | 22 + users/333fred/333fred.h | 35 +- users/333fred/config.h | 22 + users/333fred/layout_macros.h | 22 + users/333fred/rgb.c | 22 + users/333fred/rules.mk | 1 + 24 files changed, 1062 insertions(+), 32 deletions(-) create mode 100644 keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/config.h create mode 100644 keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/rules.mk (limited to 'keyboards/flehrad') diff --git a/keyboards/ergodash/rev1/keymaps/333fred/config.h b/keyboards/ergodash/rev1/keymaps/333fred/config.h index 862f306d0..b8f5e8c94 100644 --- a/keyboards/ergodash/rev1/keymaps/333fred/config.h +++ b/keyboards/ergodash/rev1/keymaps/333fred/config.h @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #pragma once #include QMK_KEYBOARD_CONFIG_H diff --git a/keyboards/ergodash/rev1/keymaps/333fred/keymap.c b/keyboards/ergodash/rev1/keymaps/333fred/keymap.c index 8ed826d5a..8fb5d0db2 100644 --- a/keyboards/ergodash/rev1/keymaps/333fred/keymap.c +++ b/keyboards/ergodash/rev1/keymaps/333fred/keymap.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include QMK_KEYBOARD_H #include "333fred.h" diff --git a/keyboards/flehrad/bigswitch/keymaps/333fred/config.h b/keyboards/flehrad/bigswitch/keymaps/333fred/config.h index 76f13f08b..3273cc8db 100644 --- a/keyboards/flehrad/bigswitch/keymaps/333fred/config.h +++ b/keyboards/flehrad/bigswitch/keymaps/333fred/config.h @@ -1,19 +1,25 @@ /* -Copyright 2018 Fredric Silberberg (333fred) + Copyright (c) 2020 Fred Silberberg -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. -You should have received a copy of the GNU General Public License -along with this program. If not, see . + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. */ + #pragma once // Long tapping term on the big switch, because it takes so long to press diff --git a/keyboards/flehrad/bigswitch/keymaps/333fred/keymap.c b/keyboards/flehrad/bigswitch/keymaps/333fred/keymap.c index be40fecb2..ef1717c6a 100644 --- a/keyboards/flehrad/bigswitch/keymaps/333fred/keymap.c +++ b/keyboards/flehrad/bigswitch/keymaps/333fred/keymap.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include QMK_KEYBOARD_H typedef enum { diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/config.h index 319013208..87b5b6637 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/config.h @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #pragma once #define USE_SERIAL diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/keymap.c index d8ac1910b..78c16fb55 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/keymap.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include QMK_KEYBOARD_H #include "333fred.h" diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/config.h b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/config.h new file mode 100644 index 000000000..eea543ae2 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/config.h @@ -0,0 +1,40 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + +#pragma once + +#define USE_SERIAL +#define EE_HANDS + +#undef TAPPING_TERM +#define TAPPING_TERM 200 + +#define OLED_DISPLAY_128X64 + +#define ENCODERS_PAD_A { F4 } +#define ENCODERS_PAD_B { F5 } + +#undef SOFT_SERIAL_PIN +#define SOFT_SERIAL_PIN D2 + +#undef OLED_TIMEOUT +#define OLED_TIMEOUT 240000 diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/keymap.c b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/keymap.c new file mode 100644 index 000000000..f9b5ca6df --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/keymap.c @@ -0,0 +1,579 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + +#include QMK_KEYBOARD_H +#include "333fred.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [BASE] = LAYOUT_5x6_5( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + OSM(MOD_LSFT), CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, CTL_T(KC_SLSH), OSM(MOD_RSFT), + KC_F4, KC_LALT, KC_BSPC, TD(TD_SYM_VIM), KC_DEL, KC_UP, KC_ENT, KC_SPC, OSL(VIM), KC_EQL, + KC_LGUI, TD(TD_COPY_PASTE), KC_DOWN, OSM(MOD_RCTL) + ), + + [SYMB] = LAYOUT_5x6_5( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, KC_EXLM, KC_AT, KC_LPRN, KC_RPRN, KC_PIPE, _______, KC_7, KC_8, KC_9, _______, KC_F12, + _______, KC_HASH, KC_DLR, KC_LCBR, KC_RCBR, KC_GRV, _______, KC_4, KC_5, KC_6, _______, _______, + _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, _______, KC_1, KC_2, KC_3, _______, _______, + KC_F7, _______, _______, _______, _______, KC_VOLU, KC_MPRV, KC_MPLY, KC_MNXT, KC_ENT, + _______, _______, KC_VOLD, _______ + ), + + [VIM] = LAYOUT_5x6_5( + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, + _______, _______, _______, _______, KC_LSFT, _______, _______, _______, _______, _______, _______, _______, + _______, DLEFT, DRIGHT, KC_LCTL, KC_LGUI, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______,_______, _______, TG(GAME), _______, _______, _______, _______, + _______, _______, _______, _______ + ), + + [GAME] = LAYOUT_5x6_5( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_T, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_G, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_B, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LOCK, KC_LALT, KC_SPC, KC_ENT, KC_GRV, TG(GAME), _______, _______, _______, KC_EQL, + KC_BSPC, KC_F5, KC_F6, _______ + ), +}; + +uint32_t quote_timer; + +void keyboard_post_init_user(void) { quote_timer = 0; } + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + tap_dance_process_keycode(keycode); + return !try_handle_macro(keycode, record); +} + +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00}; + + oled_write_P(qmk_logo, false); +} + +void render_led_status(void) { + led_t led_state = host_keyboard_led_state(); + if (led_state.num_lock || led_state.caps_lock || led_state.scroll_lock) { + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + } +} + +void render_mods_status(void) { + uint8_t mods = get_mods() | get_oneshot_mods(); + bool ctrl = mods & MOD_MASK_CTRL; + bool shft = mods & MOD_MASK_SHIFT; + bool alt = mods & MOD_MASK_ALT; + bool gui = mods & MOD_MASK_GUI; + + oled_write_P(ctrl ? PSTR("CTRL ") : PSTR(" "), false); + oled_write_P(shft ? PSTR("SHIFT ") : PSTR(" "), false); + oled_write_P(alt ? PSTR("ALT ") : PSTR(" "), false); + oled_write_ln_P(gui ? PSTR("GUI ") : PSTR(" "), false); +} + +#define MAX_LINES 8 + +void write_quote(const char* data, const uint8_t num_lines) { + uint8_t current_line = 0; + for (; current_line < (MAX_LINES - num_lines) / 2; current_line++) { + oled_advance_page(true); + } + + oled_write_ln_P(data, false); + + for (current_line += num_lines; current_line < MAX_LINES; current_line++) + { + oled_advance_page(true); + } +} + +void oled_task_user(void) { + if (is_keyboard_master()) { + render_logo(); + oled_advance_page(/* clearPageRemainder */ true); + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state)) { + case BASE: + oled_write_ln_P(PSTR("Base"), false); + break; + case SYMB: + oled_write_ln_P(PSTR("Symbols"), false); + break; + case VIM: + oled_write_ln_P(PSTR("Vim"), false); + break; + case GAME: + oled_write_ln_P(PSTR("Gaming"), false); + break; + } + + render_mods_status(); + render_led_status(); + } else { + if ((quote_timer != 0 && timer_elapsed32(quote_timer) < 300000 /* 5 minutes */) || !is_oled_on()) { + return; + } + + srand(timer_read32()); + int currentQuote = rand() % 63; + quote_timer = timer_read32(); + + // Max character count on my screen is 20 characters per line. + // Quotes are from various fantasy books, mostly either from + // The Stormlight Archive or from The Wheel of Time. + switch (currentQuote) { + case 0: + write_quote(PSTR(" Life before Death \n" + " Strength before \n" + " Weakness \n" + " Journey before \n" + " Destination"), + 5); + break; + case 1: + write_quote(PSTR(" Honor is dead, but \n" + "I'll see what I can \n" + " do."), + 3); + break; + case 2: + write_quote(PSTR(" You cannot have my \n" + " pain!"), + 2); + break; + case 3: + write_quote(PSTR(" Pride doesn't win \n" + " battles"), + 2); + break; + case 4: + write_quote(PSTR(" I have practice \n" + " following fools in \n" + " their reckless \n" + " pursuits."), + 4); + break; + case 5: + write_quote(PSTR(" What is the most \n" + " important step a \n" + " man can take?"), + 3); + break; + case 6: + write_quote(PSTR(" It's the next one. \n" + " Always the next \n" + " step, Dalinar."), + 3); + break; + case 7: + write_quote(PSTR(" NO MATING."), 1); + break; + case 8: + write_quote(PSTR(" Inappropriate? \n" + "Such as... dividing \n" + " by zero?"), + 3); + break; + case 9: + write_quote(PSTR(" I am a stick!"), 1); + break; + case 10: + write_quote(PSTR(" But you could be \n" + " fire!"), + 1); + break; + case 11: + write_quote(PSTR(" Sometimes a \n" + " hyprocrite is \n" + " nothing more than \n" + " than a man in the \n" + "process of changing"), + 5); + break; + case 12: + write_quote(PSTR(" You surrender when \n" + " you are dead. Many \n" + "a man has been given\n" + " less."), + 4); + break; + case 13: + write_quote(PSTR(" Kneel and swear to \n" + " the Lord Dragon,...\n" + " or you will be \n" + " knelt."), + 4); + break; + case 14: + write_quote(PSTR("I'm right, anyway. I\n" + "wish I wasn't, but I\n" + " am. I bloody am."), + 3); + break; + case 15: + write_quote(PSTR(" Death rides on my \n" + " shoulder,. Death \n" + " walks in my \n" + " footsteps. I am \n" + " death."), + 5); + break; + case 16: + write_quote(PSTR(" The Golden Crane \n" + " flies for Tarmon \n" + " Gai'don"), + 3); + break; + case 17: + write_quote(PSTR("You humans are very \n" + " excitable"), + 2); + break; + case 18: + write_quote(PSTR(" Phaw!"), 1); + break; + case 19: + write_quote(PSTR("I may be a fool, but\n" + " I intend to be a \n" + " live fool."), + 3); + break; + case 20: + write_quote(PSTR(" Anyone who claimed \n" + " that old age had \n" + " brought them \n" + "patience was either \n" + " lying or senile."), + 5); + break; + case 21: + write_quote(PSTR("Death is light as a \n" + "feather; duty, heavy\n" + " as a mountain"), + 3); + break; + case 22: + write_quote(PSTR("Dovie'andi se tovya \n" + " sagain."), + 2); + break; + case 23: + write_quote(PSTR(" Carai an Caldazar! \n" + "Carai an Ellisande! \n" + " Al Ellisande!"), + 3); + break; + case 24: + write_quote(PSTR(" Mia dovienya \n" + " nesodhin soende."), + 2); + break; + case 25: + write_quote(PSTR(" The Wheel of Time \n" + "turns, and Ages come\n" + " and pass, leaving \n" + "memories that become\n" + " legend."), + 5); + break; + case 26: + write_quote(PSTR(" Legend fades to \n" + "myth, and even myth \n" + " is long forgotten \n" + " when the Age that \n" + "gave it birth comes \n" + " again."), + 6); + break; + case 27: + write_quote(PSTR(" What is too absurd \n" + " to believe is \n" + "believed because it \n" + "is too absurd to be \n" + " a lie."), + 5); + break; + case 28: + write_quote(PSTR("And you gave me the \n" + " way out! Chew on \n" + "that bitterness for \n" + "lunch, you flaming, \n" + "burning, misbegotten\n" + " liars!"), + 6); + break; + case 29: + write_quote(PSTR(" He was going to \n" + "start having, 'I am \n" + "not a bloody Lord', \n" + " embroidered on his \n" + " coats."), + 5); + break; + case 30: + write_quote(PSTR("All was not lost, of\n" + " course. All was \n" + " never lost as long \n" + " as you were alive."), + 4); + break; + case 31: + write_quote(PSTR(" Everything is just \n" + " bloody fine!"), + 2); + break; + case 32: + write_quote(PSTR("The wheel weaves as \n" + " the wheel wills"), + 2); + break; + case 33: + write_quote(PSTR(" Time to toss the \n" + " dice"), + 2); + break; + case 34: + write_quote(PSTR("Always plan for the \n" + " worst, child, that \n" + " way all your \n" + " surprises are \n" + " pleasant ones."), + 5); + break; + case 35: + write_quote(PSTR("'Pessimism, she is a\n" + " fond friend of \n" + "yours, yes?' 'That's\n" + " uncalled for. I \n" + " barely know her. \n" + "Mere acquaintances, \n" + " at best.'"), + 7); + break; + case 36: + write_quote(PSTR(" Do not trouble \n" + "trouble till trouble\n" + " troubles you."), + 3); + break; + case 37: + write_quote(PSTR("If your enemy offers\n" + " you two targets, \n" + " strike at a third."), + 3); + break; + case 38: + write_quote(PSTR("The wind was not the\n" + "beginning. There are\n" + " neither beginnings \n" + " nor endings to the \n" + " turning of the \n" + " Wheel of Time. But \n" + " it was _a_ \n" + " beginning."), + 8); + break; + case 39: + write_quote(PSTR("Bloody flaming ashes"), 1); + break; + case 40: + write_quote(PSTR("Then follow Lord Mat\n" + " whenever he calls \n" + "To dance with Jak O'\n" + " the Shadows."), + 4); + break; + case 41: + write_quote(PSTR(" There are no \n" + " endings, and never \n" + "will be endings, to \n" + " the turning of the \n" + " Wheel of Time. But \n" + " it was an ending."), + 6); + break; + case 42: + write_quote(PSTR(" TAI'SHAR MALKIER!"), 1); + break; + case 43: + write_quote(PSTR("I would not mind you\n" + " in my head, if you \n" + "were not so clearly \n" + " mad."), + 4); + break; + case 44: + write_quote(PSTR(" ILYENA, MY LOVE, \n" + " FORGIVE ME!"), + 2); + break; + case 45: + write_quote(PSTR(" Oh, Light. That's \n" + "impossible! We can't\n" + " use it! Cast it \n" + "away! That is death \n" + " we hold, death and \n" + "betrayal. It is HIM."), + 6); + break; + case 46: + write_quote(PSTR("Nothing ever goes as\n" + " you expect. Expect \n" + " nothing, and you \n" + " will not be \n" + " surprised. Expect \n" + " nothing. Hope for \n" + " nothing. Nothing."), + 7); + break; + case 47: + write_quote(PSTR(" Distant Weeping"), 1); + break; + case 48: + write_quote(PSTR("Are you real? Am I?"), 1); + break; + case 49: + write_quote(PSTR(" I'm just an old \n" + "gleeman, who could I\n" + " possibly be \n" + " dangerous to?"), + 4); + break; + case 50: + write_quote(PSTR(" Mat bloody Cauthon \n" + " is no bloody hero!"), + 2); + break; + case 51: + write_quote(PSTR("You are a coward and\n" + " a tyrant. I'd name \n" + " you Darkfriend as \n" + "well, but I suspect \n" + " that the Dark One \n" + " would perhaps be \n" + " embarrassed to \n" + "associate with you."), + 8); + break; + case 52: + write_quote(PSTR(" I win again, Lews \n" + " Therin."), + 2); + break; + case 53: + write_quote(PSTR("May you always find \n" + " water and shade."), + 2); + break; + case 54: + write_quote(PSTR(" I will never serve \n" + "you, Father of Lies.\n" + "In a thousand lives,\n" + "I never have. I know\n" + " that. I'm sure of \n" + "it. Come. It is time\n" + " to die."), + 7); + break; + case 55: + write_quote(PSTR(" There may be more \n" + "than one way to skin\n" + " a cat, but the cat \n" + "isn't going to like \n" + " any of them."), + 5); + break; + case 56: + write_quote(PSTR("Please see that they\n" + " know, although the \n" + "word Black may brand\n" + "my name forever, my \n" + "soul is Brown. Tell \n" + " them..."), + 6); + break; + case 57: + write_quote(PSTR(" 'Your soul is of a \n" + "pure white, Verin,' \n" + "Egwene said softly. \n" + " 'Like the Light \n" + " itself.'"), + 5); + break; + case 58: + write_quote(PSTR(" Asha'man, Kill!"), 1); + break; + case 59: + write_quote(PSTR(" Let the lord of \n" + " chaos rule."), + 2); + break; + case 60: + write_quote(PSTR(" There's always \n" + " another secret."), + 2); + break; + case 61: + write_quote(PSTR(" You see the great \n" + "thing about madness \n" + "is that it's all in \n" + " your head."), + 4); + break; + case 62: + write_quote(PSTR(" In one Age, called \n" + " the Third Age by \n" + "some, an Age yet to \n" + " come, an Age long \n" + " past, a wind rose \n" + " above..."), + 6); + break; + } + } +} + +void encoder_update_user(uint8_t index, bool clockwise) { + // On the left, control the volume. On the right, scroll the page + if (index == 0) { + if (clockwise) { + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + } else { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/rules.mk b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/rules.mk new file mode 100644 index 000000000..2bd6620c2 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/rules.mk @@ -0,0 +1,4 @@ +KEY_LOCK_ENABLE = yes +CONSOLE_ENABLE = no +OLED_DRIVER_ENABLE = yes +ENCODER_ENABLE = yes diff --git a/keyboards/keebio/iris/keymaps/333fred/config.h b/keyboards/keebio/iris/keymaps/333fred/config.h index c3997b0f4..3c8ba4cb2 100644 --- a/keyboards/keebio/iris/keymaps/333fred/config.h +++ b/keyboards/keebio/iris/keymaps/333fred/config.h @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #pragma once #define USE_SERIAL diff --git a/keyboards/keebio/iris/keymaps/333fred/keymap.c b/keyboards/keebio/iris/keymaps/333fred/keymap.c index b8a65d7d2..1141e6b00 100644 --- a/keyboards/keebio/iris/keymaps/333fred/keymap.c +++ b/keyboards/keebio/iris/keymaps/333fred/keymap.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include QMK_KEYBOARD_H #include "333fred.h" diff --git a/keyboards/naked60/keymaps/333fred/keymap.c b/keyboards/naked60/keymaps/333fred/keymap.c index 3331dee9b..7185ec78b 100644 --- a/keyboards/naked60/keymaps/333fred/keymap.c +++ b/keyboards/naked60/keymaps/333fred/keymap.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include QMK_KEYBOARD_H #include "333fred.h" diff --git a/keyboards/rgbkb/zen/rev1/keymaps/333fred/config.h b/keyboards/rgbkb/zen/rev1/keymaps/333fred/config.h index 1634f368c..38e5590d3 100644 --- a/keyboards/rgbkb/zen/rev1/keymaps/333fred/config.h +++ b/keyboards/rgbkb/zen/rev1/keymaps/333fred/config.h @@ -1,18 +1,23 @@ /* -Copyright 2018 Fredric Silberberg - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. */ #pragma once diff --git a/keyboards/rgbkb/zen/rev1/keymaps/333fred/keymap.c b/keyboards/rgbkb/zen/rev1/keymaps/333fred/keymap.c index 53756344f..946ca79ef 100644 --- a/keyboards/rgbkb/zen/rev1/keymaps/333fred/keymap.c +++ b/keyboards/rgbkb/zen/rev1/keymaps/333fred/keymap.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include QMK_KEYBOARD_H #include "333fred.h" diff --git a/layouts/community/ergodox/333fred/config.h b/layouts/community/ergodox/333fred/config.h index 5a91ea3aa..0509ddbbb 100644 --- a/layouts/community/ergodox/333fred/config.h +++ b/layouts/community/ergodox/333fred/config.h @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #pragma once #include QMK_KEYBOARD_CONFIG_H diff --git a/layouts/community/ergodox/333fred/keymap.c b/layouts/community/ergodox/333fred/keymap.c index 134592766..b9aefd929 100644 --- a/layouts/community/ergodox/333fred/keymap.c +++ b/layouts/community/ergodox/333fred/keymap.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include QMK_KEYBOARD_H #include "debug.h" #include "action_layer.h" diff --git a/layouts/community/ortho_5x12/333fred/config.h b/layouts/community/ortho_5x12/333fred/config.h index 2e5dfe2e2..bdbeead54 100644 --- a/layouts/community/ortho_5x12/333fred/config.h +++ b/layouts/community/ortho_5x12/333fred/config.h @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #pragma once #define USE_SERIAL diff --git a/layouts/community/ortho_5x12/333fred/keymap.c b/layouts/community/ortho_5x12/333fred/keymap.c index a228a49d4..e270b4089 100644 --- a/layouts/community/ortho_5x12/333fred/keymap.c +++ b/layouts/community/ortho_5x12/333fred/keymap.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include QMK_KEYBOARD_H #include "333fred.h" diff --git a/users/333fred/333fred.c b/users/333fred/333fred.c index 79df8c4de..621b9e664 100644 --- a/users/333fred/333fred.c +++ b/users/333fred/333fred.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include "333fred.h" #include "quantum.h" #include "action.h" diff --git a/users/333fred/333fred.h b/users/333fred/333fred.h index 716b61a25..0532ff2df 100644 --- a/users/333fred/333fred.h +++ b/users/333fred/333fred.h @@ -1,16 +1,37 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #pragma once #include "quantum.h" #include "layout_macros.h" #define BASE 0 -#define CODE 1 // code layer -#define CODEFLOW 2 -#define SYMB 3 -#define MDIA 4 // media keys -#define VIM 5 -#define GAME 6 -#define GAME_ARROW 7 +#define CODEFLOW 1 +#define SYMB 2 +#define MDIA 3 // media keys +#define VIM 4 +#define GAME 5 +#define GAME_ARROW 6 // Tap dance config shared between my keyboards enum tap_dance_declarations { diff --git a/users/333fred/config.h b/users/333fred/config.h index 5974b7892..0bbaa38a9 100644 --- a/users/333fred/config.h +++ b/users/333fred/config.h @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #pragma once #define PERMISSIVE_HOLD diff --git a/users/333fred/layout_macros.h b/users/333fred/layout_macros.h index 3b163f6ce..d46a41905 100644 --- a/users/333fred/layout_macros.h +++ b/users/333fred/layout_macros.h @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #pragma once #define SIX_TRNS _______, _______, _______, _______, _______, _______ diff --git a/users/333fred/rgb.c b/users/333fred/rgb.c index c86cd1c77..d28714330 100644 --- a/users/333fred/rgb.c +++ b/users/333fred/rgb.c @@ -1,3 +1,25 @@ +/* + Copyright (c) 2020 Fred Silberberg + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. +*/ + #include "quantum.h" #include "333fred.h" diff --git a/users/333fred/rules.mk b/users/333fred/rules.mk index 191422e36..265a6c18c 100644 --- a/users/333fred/rules.mk +++ b/users/333fred/rules.mk @@ -7,3 +7,4 @@ endif TAP_DANCE_ENABLE=yes NKRO_ENABLE = yes PERMISSIVE_HOLD = yes +LTO_ENABLE = yes -- cgit v1.2.3-70-g09d2