From f01133d08918b3d1dd7b349309b02ffd37273f5c Mon Sep 17 00:00:00 2001 From: Filip Sund Date: Wed, 3 Oct 2018 19:12:27 +0200 Subject: Keyboard: Add handwired/pteron config and keymaps (#4060) * Added pteron files made via from kbfirmware.com. * Added readme. * Made some progress on Pteron keymap. * More keymap. * Updated bootloader, added some keymap illustrations. * Moved default keymap to FSund, made default keymap from default preonic keymap. * Fixed typo in default pteron keymap. * Made changes recommended by drashna. --- keyboards/handwired/pteron/rules.mk | 58 +++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 keyboards/handwired/pteron/rules.mk (limited to 'keyboards/handwired/pteron/rules.mk') diff --git a/keyboards/handwired/pteron/rules.mk b/keyboards/handwired/pteron/rules.mk new file mode 100644 index 000000000..10218020e --- /dev/null +++ b/keyboards/handwired/pteron/rules.mk @@ -0,0 +1,58 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no +UNICODE_ENABLE = no +UNICODEMAP_ENABLE = no \ No newline at end of file -- cgit v1.2.3-70-g09d2