From 44441de8cad7255fd0637459ed39b89e34751b78 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 7 Aug 2016 17:04:39 +0300 Subject: Split keyboard makefiles into rules and Makefile --- keyboards/lets_split/rules.mk | 74 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 keyboards/lets_split/rules.mk (limited to 'keyboards/lets_split/rules.mk') diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk new file mode 100644 index 000000000..6961fbd55 --- /dev/null +++ b/keyboards/lets_split/rules.mk @@ -0,0 +1,74 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= yes # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes \ No newline at end of file -- cgit v1.2.3-70-g09d2 From 6631abc1cb0e570271bcf33464e3af17b6fc0b87 Mon Sep 17 00:00:00 2001 From: IBNobody Date: Tue, 20 Sep 2016 21:38:59 -0500 Subject: Made Serial and I2C not include the Other This saves 192 bytes --- keyboards/lets_split/config.h | 7 ++++++- keyboards/lets_split/i2c.c | 3 +++ keyboards/lets_split/matrix.c | 23 +++++++++++++++-------- keyboards/lets_split/rules.mk | 4 ++-- keyboards/lets_split/serial.c | 5 ++++- keyboards/lets_split/split_util.c | 8 ++++++-- 6 files changed, 36 insertions(+), 14 deletions(-) (limited to 'keyboards/lets_split/rules.mk') diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index ec99514aa..f4d900acc 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -41,6 +41,11 @@ along with this program. If not, see . // #define USE_I2C +// Use serial if not using I2C +#ifndef USE_I2C +# define USE_SERIAL +#endif + // #define EE_HANDS #define I2C_MASTER_LEFT @@ -94,4 +99,4 @@ along with this program. If not, see . //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -#endif \ No newline at end of file +#endif diff --git a/keyboards/lets_split/i2c.c b/keyboards/lets_split/i2c.c index c72789403..084c890c4 100644 --- a/keyboards/lets_split/i2c.c +++ b/keyboards/lets_split/i2c.c @@ -6,6 +6,8 @@ #include #include "i2c.h" +#ifdef USE_I2C + // Limits the amount of we wait for any one i2c transaction. // Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is // 9 bits, a single transaction will take around 90μs to complete. @@ -157,3 +159,4 @@ ISR(TWI_vect) { // Reset everything, so we are ready for the next TWI interrupt TWCR |= (1<. #include "debug.h" #include "util.h" #include "matrix.h" -#include "i2c.h" -#include "serial.h" #include "split_util.h" #include "pro_micro.h" #include "config.h" +#ifdef USE_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "serial.h" +#endif + #ifndef DEBOUNCE -# define DEBOUNCE 5 +# define DEBOUNCE 5 #endif #define ERROR_DISCONNECT_COUNT 5 @@ -145,6 +149,8 @@ uint8_t _matrix_scan(void) return 1; } +#ifdef USE_I2C + // Get rows from other half over i2c int i2c_transaction(void) { int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; @@ -176,7 +182,8 @@ i2c_error: // the cable is disconnceted, or something else went wrong return 0; } -#ifndef USE_I2C +#else // USE_SERIAL + int serial_transaction(void) { int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; @@ -199,7 +206,7 @@ uint8_t matrix_scan(void) #ifdef USE_I2C if( i2c_transaction() ) { -#else +#else // USE_SERIAL if( serial_transaction() ) { #endif // turn on the indicator led when halves are disconnected @@ -235,7 +242,7 @@ void matrix_slave_scan(void) { /* i2c_slave_buffer[i] = matrix[offset+i]; */ i2c_slave_buffer[i] = matrix[offset+i]; } -#else +#else // USE_SERIAL for (int i = 0; i < ROWS_PER_HAND; ++i) { serial_slave_buffer[i] = matrix[offset+i]; } @@ -290,7 +297,7 @@ static void init_cols(void) static matrix_row_t read_cols(void) { matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { + for(int x = 0; x < MATRIX_COLS; x++) { result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); } return result; @@ -298,7 +305,7 @@ static matrix_row_t read_cols(void) static void unselect_rows(void) { - for(int x = 0; x < ROWS_PER_HAND; x++) { + for(int x = 0; x < ROWS_PER_HAND; x++) { _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); } diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index 6961fbd55..6fde8a444 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -52,7 +52,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) @@ -71,4 +71,4 @@ RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes \ No newline at end of file +CUSTOM_MATRIX = yes diff --git a/keyboards/lets_split/serial.c b/keyboards/lets_split/serial.c index f439c2f20..6faed09ce 100644 --- a/keyboards/lets_split/serial.c +++ b/keyboards/lets_split/serial.c @@ -10,9 +10,10 @@ #include #include #include - #include "serial.h" +#ifdef USE_SERIAL + // Serial pulse period in microseconds. Its probably a bad idea to lower this // value. #define SERIAL_DELAY 24 @@ -223,3 +224,5 @@ int serial_update_buffers(void) { sei(); return 0; } + +#endif diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c index 65003a71a..461921798 100644 --- a/keyboards/lets_split/split_util.c +++ b/keyboards/lets_split/split_util.c @@ -6,11 +6,15 @@ #include #include "split_util.h" #include "matrix.h" -#include "i2c.h" -#include "serial.h" #include "keyboard.h" #include "config.h" +#ifdef USE_I2C +# include "i2c.h" +#else +# include "serial.h" +#endif + volatile bool isLeftHand = true; static void setup_handedness(void) { -- cgit v1.2.3-70-g09d2