From b12b26946d19830a64d9643ddf2944303ac1f6d0 Mon Sep 17 00:00:00 2001 From: mechmerlin Date: Thu, 18 Jul 2019 19:24:02 -0700 Subject: simple readme fix --- keyboards/singa/readme.md | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'keyboards/singa') diff --git a/keyboards/singa/readme.md b/keyboards/singa/readme.md index 4400717c8..faeb816ec 100644 --- a/keyboards/singa/readme.md +++ b/keyboards/singa/readme.md @@ -20,6 +20,8 @@ Flashing ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. +**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard. + Windows: 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). 2. Place your keyboard into reset. @@ -41,9 +43,10 @@ macOS: brew install python3 pip3 install pyusb brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + ``` 4. Place your keyboard into reset. 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3-70-g09d2 From 0bd03150e5952978e0a7044dcfea1bb617c2390d Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 27 Jul 2019 10:37:33 +1000 Subject: Remove NO_BACKLIGHT_CLOCK (#6418) --- keyboards/ares/config.h | 1 - keyboards/bfake/config.h | 1 - keyboards/canoe/config.h | 1 - keyboards/donutcables/budget96/config.h | 1 - keyboards/facew/config.h | 1 - keyboards/ft/mars80/config.h | 1 - keyboards/jc65/v32a/config.h | 1 - keyboards/panc60/config.h | 1 - keyboards/singa/config.h | 1 - keyboards/unikorn/config.h | 1 - quantum/template/ps2avrgb/config.h | 1 - 11 files changed, 11 deletions(-) (limited to 'keyboards/singa') diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h index cca26aab3..dd01d1565 100644 --- a/keyboards/ares/config.h +++ b/keyboards/ares/config.h @@ -36,7 +36,6 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h index 235181d09..8a43aacd9 100644 --- a/keyboards/bfake/config.h +++ b/keyboards/bfake/config.h @@ -37,7 +37,6 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/canoe/config.h b/keyboards/canoe/config.h index cddb749dc..45581b549 100644 --- a/keyboards/canoe/config.h +++ b/keyboards/canoe/config.h @@ -37,7 +37,6 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h index 75aacb4d4..b8772fc86 100644 --- a/keyboards/donutcables/budget96/config.h +++ b/keyboards/donutcables/budget96/config.h @@ -36,6 +36,5 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h index 239783f8b..62ba98be5 100644 --- a/keyboards/facew/config.h +++ b/keyboards/facew/config.h @@ -36,6 +36,5 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/ft/mars80/config.h b/keyboards/ft/mars80/config.h index b56adb114..1bf939287 100644 --- a/keyboards/ft/mars80/config.h +++ b/keyboards/ft/mars80/config.h @@ -38,7 +38,6 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/jc65/v32a/config.h b/keyboards/jc65/v32a/config.h index a5ec23ae4..e91f46aeb 100644 --- a/keyboards/jc65/v32a/config.h +++ b/keyboards/jc65/v32a/config.h @@ -28,7 +28,6 @@ along with this program. If not, see . #define MATRIX_ROWS 8 #define MATRIX_COLS 16 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLED_NUM 16 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/panc60/config.h b/keyboards/panc60/config.h index b5889180e..921d8da30 100644 --- a/keyboards/panc60/config.h +++ b/keyboards/panc60/config.h @@ -36,6 +36,5 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/singa/config.h b/keyboards/singa/config.h index 29110bd4e..dda54ccf4 100644 --- a/keyboards/singa/config.h +++ b/keyboards/singa/config.h @@ -36,6 +36,5 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS diff --git a/keyboards/unikorn/config.h b/keyboards/unikorn/config.h index 161956b88..a871c0e27 100644 --- a/keyboards/unikorn/config.h +++ b/keyboards/unikorn/config.h @@ -35,7 +35,6 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #ifdef RGBLIGHT_ENABLE #define RGBLED_NUM 17 diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h index 9117bf1f9..3ab841d74 100644 --- a/quantum/template/ps2avrgb/config.h +++ b/quantum/template/ps2avrgb/config.h @@ -39,7 +39,6 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #define RGBLIGHT_ANIMATIONS -- cgit v1.2.3-70-g09d2 From de4a47f1cc28c4ef66e7560eac2a50f717070ae2 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 21 Sep 2019 15:06:32 +1000 Subject: Cleanup rules.mk for 32A and 328P keyboards (#6767) --- docs/flashing.md | 80 ++++++++++++++++++--------- keyboards/ares/rules.mk | 23 +++----- keyboards/bfake/rules.mk | 23 +++----- keyboards/canoe/rules.mk | 23 +++----- keyboards/coseyfannitutti/discipline/rules.mk | 52 +---------------- keyboards/donutcables/budget96/rules.mk | 23 +++----- keyboards/eve/meteor/rules.mk | 12 ++-- keyboards/exclusive/e6v2/le_bmc/rules.mk | 58 +------------------ keyboards/exclusive/e6v2/oe_bmc/rules.mk | 58 +------------------ keyboards/facew/rules.mk | 23 +++----- keyboards/ft/mars80/rules.mk | 23 +++----- keyboards/gingham/rules.mk | 5 +- keyboards/gray_studio/hb85/rules.mk | 23 +++----- keyboards/handwired/hnah40/rules.mk | 10 +++- keyboards/jc65/v32a/rules.mk | 23 +++----- keyboards/jj40/rules.mk | 23 +++----- keyboards/jj4x4/rules.mk | 23 +++----- keyboards/jj50/keymaps/archetype/rules.mk | 23 +++----- keyboards/jj50/rules.mk | 14 +---- keyboards/kbdfans/kbdpad/mk1/rules.mk | 23 +++----- keyboards/mechmini/v1/rules.mk | 23 +++----- keyboards/mehkee96/rules.mk | 21 +++---- keyboards/mt40/rules.mk | 23 +++----- keyboards/panc60/rules.mk | 23 +++----- keyboards/pearl/rules.mk | 23 +++----- keyboards/plaid/rules.mk | 18 +----- keyboards/singa/rules.mk | 23 +++----- keyboards/skog/rules.mk | 23 +++----- keyboards/tgr/alice/rules.mk | 23 +++----- keyboards/tgr/jane/rules.mk | 23 +++----- keyboards/unikorn/rules.mk | 23 +++----- keyboards/winkeyless/bface/rules.mk | 21 +++---- keyboards/winkeyless/bmini/rules.mk | 23 +++----- keyboards/winkeyless/bminiex/rules.mk | 23 +++----- keyboards/ymd75/rules.mk | 24 +++----- keyboards/ymd96/rules.mk | 23 +++----- keyboards/ymdk/bface/rules.mk | 12 +++- keyboards/ymdk_np21/rules.mk | 23 +++----- quantum/template/avr/rules.mk | 6 +- quantum/template/ps2avrgb/rules.mk | 12 ++-- 40 files changed, 333 insertions(+), 645 deletions(-) (limited to 'keyboards/singa') diff --git a/docs/flashing.md b/docs/flashing.md index b47a5ebf8..00350b840 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -10,11 +10,17 @@ Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by To ensure compatibility with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead): - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = atmel-dfu +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu +``` Compatible flashers: @@ -64,11 +70,17 @@ Arduino boards and their clones use the [Caterina bootloader](https://github.com To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`: - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = caterina +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina +``` Compatible flashers: @@ -100,11 +112,17 @@ Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on al To ensure compatibility with the Halfkay bootloader, make sure this block is present your `rules.mk`: - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = halfkay +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = halfkay +``` Compatible flashers: @@ -125,11 +143,17 @@ USBasploader is a bootloader developed by matrixstorm. It is used in some non-US To ensure compatibility with the USBasploader bootloader, make sure this block is present in your `rules.mk`: - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = USBasp +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = USBasp +``` Compatible flashers: @@ -150,11 +174,17 @@ BootloadHID is a USB bootloader for AVR microcontrollers. The uploader tool requ To ensure compatibility with the bootloadHID bootloader, make sure this block is present your `rules.mk`: - # Bootloader - # This definition is optional, and if your keyboard supports multiple bootloaders of - # different sizes, comment this out, and the correct address will be loaded - # automatically (+60). See bootloader.mk for all options. - BOOTLOADER = bootloadHID +```make +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = bootloadHID +``` Compatible flashers: diff --git a/keyboards/ares/rules.mk b/keyboards/ares/rules.mk index cd8edc611..3ac90cf97 100644 --- a/keyboards/ares/rules.mk +++ b/keyboards/ares/rules.mk @@ -15,18 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -38,11 +35,7 @@ COMMAND_ENABLE = yes BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = no RGBLIGHT_CUSTOM_DRIVER = yes -NO_UART = yes OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk index 6577ea193..b5b3b852c 100644 --- a/keyboards/bfake/rules.mk +++ b/keyboards/bfake/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/canoe/rules.mk b/keyboards/canoe/rules.mk index 3d7bc0215..8cfc81056 100644 --- a/keyboards/canoe/rules.mk +++ b/keyboards/canoe/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/coseyfannitutti/discipline/rules.mk b/keyboards/coseyfannitutti/discipline/rules.mk index bc81342de..24b5969b7 100644 --- a/keyboards/coseyfannitutti/discipline/rules.mk +++ b/keyboards/coseyfannitutti/discipline/rules.mk @@ -1,61 +1,19 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. +# Processor frequency F_CPU = 16000000 -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID -# -# This uses usbaspbootloader +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = USBasp -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 - # Flash program via avrdude, but default command is not suitable. # You can use plaid:default:program PROGRAM_CMD = avrdude -c usbasp -p m32 -U flash:w:$(BUILD_DIR)/$(TARGET).hex @@ -84,8 +42,4 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - LAYOUTS = 65_ansi diff --git a/keyboards/donutcables/budget96/rules.mk b/keyboards/donutcables/budget96/rules.mk index 67697ac73..4f9e0e412 100644 --- a/keyboards/donutcables/budget96/rules.mk +++ b/keyboards/donutcables/budget96/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -44,6 +40,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/eve/meteor/rules.mk b/keyboards/eve/meteor/rules.mk index 10fc8cd03..e43baee5c 100644 --- a/keyboards/eve/meteor/rules.mk +++ b/keyboards/eve/meteor/rules.mk @@ -16,10 +16,14 @@ # MCU name MCU = atmega32a -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index a9156adeb..13a5f1b89 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -1,46 +1,5 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB - -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 12000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -# ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -# F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS = -DDEBUG_LEVEL=0 - # Bootloader selection # Teensy halfkay @@ -48,20 +7,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -84,6 +33,5 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index a9156adeb..13a5f1b89 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -1,46 +1,5 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB - -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 12000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -# ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -# F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS = -DDEBUG_LEVEL=0 - # Bootloader selection # Teensy halfkay @@ -48,20 +7,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -84,6 +33,5 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/facew/rules.mk b/keyboards/facew/rules.mk index b939b0fd2..c9942e369 100644 --- a/keyboards/facew/rules.mk +++ b/keyboards/facew/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,7 +41,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup SRC = i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = 60_ansi diff --git a/keyboards/ft/mars80/rules.mk b/keyboards/ft/mars80/rules.mk index 159307f8d..f1c79b196 100644 --- a/keyboards/ft/mars80/rules.mk +++ b/keyboards/ft/mars80/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -44,7 +40,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk index 9afbd0964..aa228c875 100644 --- a/keyboards/gingham/rules.mk +++ b/keyboards/gingham/rules.mk @@ -10,9 +10,8 @@ MCU = atmega328p # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID -# -# This uses usbaspbootloader +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = USBasp # Flash program via avrdude, but default command is not suitable. diff --git a/keyboards/gray_studio/hb85/rules.mk b/keyboards/gray_studio/hb85/rules.mk index c3e17e493..5339aad89 100644 --- a/keyboards/gray_studio/hb85/rules.mk +++ b/keyboards/gray_studio/hb85/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/handwired/hnah40/rules.mk b/keyboards/handwired/hnah40/rules.mk index 341b8d03d..bbdf5176c 100644 --- a/keyboards/handwired/hnah40/rules.mk +++ b/keyboards/handwired/hnah40/rules.mk @@ -1,7 +1,15 @@ # MCU name MCU = atmega328p -BOOTLOADER = bootloadHID +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = USBasp # Flash program via avrdude, but default command is not suitable. # You can use hnah40:default:program diff --git a/keyboards/jc65/v32a/rules.mk b/keyboards/jc65/v32a/rules.mk index fac85172e..ee6efb3fa 100644 --- a/keyboards/jc65/v32a/rules.mk +++ b/keyboards/jc65/v32a/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/jj40/rules.mk b/keyboards/jj40/rules.mk index 3e496f97e..b0bf574bd 100644 --- a/keyboards/jj40/rules.mk +++ b/keyboards/jj40/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # Build Options @@ -54,7 +50,4 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) SRC += i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/jj4x4/rules.mk b/keyboards/jj4x4/rules.mk index 3ac2cc043..fedc525f8 100644 --- a/keyboards/jj4x4/rules.mk +++ b/keyboards/jj4x4/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # Build Options @@ -54,7 +50,4 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) SRC += i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = ortho_4x4 diff --git a/keyboards/jj50/keymaps/archetype/rules.mk b/keyboards/jj50/keymaps/archetype/rules.mk index e32e8ce74..1a63376be 100644 --- a/keyboards/jj50/keymaps/archetype/rules.mk +++ b/keyboards/jj50/keymaps/archetype/rules.mk @@ -16,19 +16,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -59,7 +55,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c -# programming options -PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex - LAYOUTS = ortho_5x12 diff --git a/keyboards/jj50/rules.mk b/keyboards/jj50/rules.mk index 2390d9631..b23b4becd 100644 --- a/keyboards/jj50/rules.mk +++ b/keyboards/jj50/rules.mk @@ -16,14 +16,6 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 # Bootloader selection # Teensy halfkay @@ -31,7 +23,8 @@ F_CPU = 12000000 # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -60,7 +53,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = ortho_5x12 diff --git a/keyboards/kbdfans/kbdpad/mk1/rules.mk b/keyboards/kbdfans/kbdpad/mk1/rules.mk index 421b0cf32..e43baee5c 100644 --- a/keyboards/kbdfans/kbdpad/mk1/rules.mk +++ b/keyboards/kbdfans/kbdpad/mk1/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = no OPT_DEFS = -DDEBUG_LEVEL=0 QUANTUM_LIB_SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/mechmini/v1/rules.mk b/keyboards/mechmini/v1/rules.mk index 11bd8955f..3510ca6f3 100644 --- a/keyboards/mechmini/v1/rules.mk +++ b/keyboards/mechmini/v1/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/mehkee96/rules.mk b/keyboards/mehkee96/rules.mk index f7fb397e2..244dd2141 100644 --- a/keyboards/mehkee96/rules.mk +++ b/keyboards/mehkee96/rules.mk @@ -1,18 +1,16 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# Processor frequency. -F_CPU = 12000000 - -# Bootloader +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID - # Build Options # comment out to disable the options. # @@ -30,6 +28,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk index db6ec93f5..19410bc6e 100644 --- a/keyboards/mt40/rules.mk +++ b/keyboards/mt40/rules.mk @@ -1,18 +1,14 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -37,8 +33,5 @@ OPT_DEFS = -DDEBUG_LEVEL=0 CUSTOM_MATRIX = yes SRC = matrix.c i2c.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = planck_mit LAYOUTS_HAS_RGB = no diff --git a/keyboards/panc60/rules.mk b/keyboards/panc60/rules.mk index 5531807f1..6ca8d7b78 100644 --- a/keyboards/panc60/rules.mk +++ b/keyboards/panc60/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,7 +41,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup SRC = i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = 60_ansi 60_hhkb diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk index 4db92d121..eacf8bb2c 100644 --- a/keyboards/pearl/rules.mk +++ b/keyboards/pearl/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -44,6 +40,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/plaid/rules.mk b/keyboards/plaid/rules.mk index 755a4f899..5ac35ee7f 100644 --- a/keyboards/plaid/rules.mk +++ b/keyboards/plaid/rules.mk @@ -7,21 +7,9 @@ MCU = atmega328p # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID -# -# This uses usbaspbootloader -# BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = USBasp # Flash program via avrdude, but default command is not suitable. # You can use plaid:default:program diff --git a/keyboards/singa/rules.mk b/keyboards/singa/rules.mk index 7e4669689..df2a59e90 100644 --- a/keyboards/singa/rules.mk +++ b/keyboards/singa/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/skog/rules.mk b/keyboards/skog/rules.mk index bce0c442a..b8439906b 100644 --- a/keyboards/skog/rules.mk +++ b/keyboards/skog/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -50,6 +46,3 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/tgr/alice/rules.mk b/keyboards/tgr/alice/rules.mk index eecd38d7e..aa141f7c3 100644 --- a/keyboards/tgr/alice/rules.mk +++ b/keyboards/tgr/alice/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/tgr/jane/rules.mk b/keyboards/tgr/jane/rules.mk index bf9aa79a8..f2b488306 100644 --- a/keyboards/tgr/jane/rules.mk +++ b/keyboards/tgr/jane/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -44,7 +40,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0 QUANTUM_LIB_SRC = i2c_master.c -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/unikorn/rules.mk b/keyboards/unikorn/rules.mk index 7d6fa14e1..d4f4d2aaf 100644 --- a/keyboards/unikorn/rules.mk +++ b/keyboards/unikorn/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -43,6 +39,3 @@ RGBLIGHT_CUSTOM_DRIVER = no OPT_DEFS = -DDEBUG_LEVEL=0 SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/winkeyless/bface/rules.mk b/keyboards/winkeyless/bface/rules.mk index 4e016b47d..12b502785 100644 --- a/keyboards/winkeyless/bface/rules.mk +++ b/keyboards/winkeyless/bface/rules.mk @@ -15,14 +15,16 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = bootloadHID # build options BOOTMAGIC_ENABLE = no @@ -37,11 +39,6 @@ RGBLIGHT_ENABLE = yes RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 -BOOTLOADER = bootloadHID # custom matrix setup SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex - diff --git a/keyboards/winkeyless/bmini/rules.mk b/keyboards/winkeyless/bmini/rules.mk index 3d7bc0215..8cfc81056 100644 --- a/keyboards/winkeyless/bmini/rules.mk +++ b/keyboards/winkeyless/bmini/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/winkeyless/bminiex/rules.mk b/keyboards/winkeyless/bminiex/rules.mk index e5d3a2a88..24e434879 100644 --- a/keyboards/winkeyless/bminiex/rules.mk +++ b/keyboards/winkeyless/bminiex/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -51,6 +47,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/ymd75/rules.mk b/keyboards/ymd75/rules.mk index 9d09d3da9..7bee20173 100644 --- a/keyboards/ymd75/rules.mk +++ b/keyboards/ymd75/rules.mk @@ -16,19 +16,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -56,7 +52,3 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/ymd96/rules.mk b/keyboards/ymd96/rules.mk index 1cc4060b0..96441e1b3 100644 --- a/keyboards/ymd96/rules.mk +++ b/keyboards/ymd96/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -53,6 +49,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/ymdk/bface/rules.mk b/keyboards/ymdk/bface/rules.mk index 8f1f83f78..7b829530b 100644 --- a/keyboards/ymdk/bface/rules.mk +++ b/keyboards/ymdk/bface/rules.mk @@ -16,6 +16,16 @@ # MCU name MCU = atmega32a +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = bootloadHID + # build options BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes @@ -29,5 +39,3 @@ RGBLIGHT_ENABLE = no RGBLIGHT_CUSTOM_DRIVER = no OPT_DEFS = -DDEBUG_LEVEL=0 -BOOTLOADER = bootloadHID - diff --git a/keyboards/ymdk_np21/rules.mk b/keyboards/ymdk_np21/rules.mk index 670967fbd..634b9c69c 100644 --- a/keyboards/ymdk_np21/rules.mk +++ b/keyboards/ymdk_np21/rules.mk @@ -15,19 +15,15 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -54,6 +50,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup CUSTOM_MATRIX = yes SRC = matrix.c i2c.c backlight.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/quantum/template/avr/rules.mk b/quantum/template/avr/rules.mk index 50deba92c..0ed05e71b 100644 --- a/quantum/template/avr/rules.mk +++ b/quantum/template/avr/rules.mk @@ -1,17 +1,16 @@ # MCU name MCU = atmega32u4 - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # If you don't know the bootloader type, then you can specify the # Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line # Teensy halfKay 512 @@ -21,7 +20,6 @@ BOOTLOADER = atmel-dfu # USBaspLoader 2048 # OPT_DEFS += -DBOOTLOADER_SIZE=4096 - # Build Options # change yes to no to disable # diff --git a/quantum/template/ps2avrgb/rules.mk b/quantum/template/ps2avrgb/rules.mk index a3ac9bd75..bda115db5 100644 --- a/quantum/template/ps2avrgb/rules.mk +++ b/quantum/template/ps2avrgb/rules.mk @@ -1,10 +1,14 @@ # MCU name MCU = atmega32a -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options -- cgit v1.2.3-70-g09d2 From 6d7c6d4fd6a4af8e0355b5d10c68db3274c1a7f8 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Tue, 29 Oct 2019 06:08:00 +1100 Subject: Cleanup rules.mk for 32U4 keyboards, R-S (#7182) --- keyboards/rabbit/rabbit68/rules.mk | 4 +- keyboards/redox/keymaps/default/rules.mk | 2 - keyboards/redox/rev1/rules.mk | 1 - keyboards/redox/rules.mk | 54 +++------------ keyboards/redox_w/rules.mk | 64 ++++------------- keyboards/redscarf_iiplus/verb/rules.mk | 51 +------------- keyboards/redscarf_iiplus/verc/rules.mk | 53 +-------------- keyboards/reviung34/rules.mk | 16 +---- keyboards/reviung39/keymaps/default/rules.mk | 2 +- keyboards/reviung39/keymaps/default_s/rules.mk | 2 +- keyboards/reviung39/rules.mk | 15 +--- keyboards/rgbkb/sol/keymaps/default/rules.mk | 5 -- keyboards/rgbkb/sol/rules.mk | 21 +++--- keyboards/rgbkb/zen/rules.mk | 18 +++-- keyboards/rgbkb/zygomorph/rules.mk | 47 +++---------- keyboards/runner3680/3x6/keymaps/default/rules.mk | 1 - keyboards/runner3680/3x7/keymaps/default/rules.mk | 1 - keyboards/runner3680/3x8/keymaps/default/rules.mk | 1 - keyboards/runner3680/4x6/keymaps/default/rules.mk | 1 - keyboards/runner3680/4x7/keymaps/default/rules.mk | 1 - keyboards/runner3680/4x8/keymaps/default/rules.mk | 1 - keyboards/runner3680/5x6/keymaps/default/rules.mk | 1 - keyboards/runner3680/5x7/keymaps/default/rules.mk | 1 - keyboards/runner3680/5x8/keymaps/JIS/rules.mk | 1 - keyboards/runner3680/5x8/keymaps/default/rules.mk | 1 - keyboards/runner3680/rules.mk | 27 +------- keyboards/s7_elephant/rules.mk | 43 +++--------- keyboards/scarletbandana/rules.mk | 52 +++----------- keyboards/sck/osa/rules.mk | 4 -- keyboards/scythe/rules.mk | 51 +------------- keyboards/sentraq/number_pad/rules.mk | 51 +------------- keyboards/sentraq/s60_x/default/rules.mk | 53 +++------------ keyboards/sentraq/s60_x/rgb/rules.mk | 53 +++------------ keyboards/sentraq/s65_plus/rules.mk | 56 +++------------ keyboards/sentraq/s65_x/rules.mk | 54 +++------------ keyboards/shiro/rules.mk | 51 +------------- keyboards/signum/3_0/elitec/rules.mk | 50 +++----------- keyboards/singa/keymaps/default/rules.mk | 0 keyboards/singa/keymaps/test/rules.mk | 0 keyboards/sirius/unigo66/rules.mk | 17 +++-- keyboards/sixkeyboard/rules.mk | 4 +- keyboards/smk60/rules.mk | 59 +++------------- keyboards/snagpad/rules.mk | 42 +----------- keyboards/snampad/rules.mk | 51 +------------- keyboards/southpole/rules.mk | 50 +++----------- keyboards/spacetime/rules.mk | 51 +------------- keyboards/speedo/rules.mk | 54 +++------------ keyboards/standaside/rules.mk | 56 +++------------ keyboards/stella/rules.mk | 7 +- keyboards/suihankey/alpha/rules.mk | 83 +---------------------- keyboards/suihankey/rev1/rules.mk | 83 +---------------------- keyboards/suihankey/rules.mk | 51 +------------- keyboards/suihankey/split/alpha/rules.mk | 83 +---------------------- keyboards/suihankey/split/rev1/rules.mk | 83 +---------------------- keyboards/sx60/keymaps/default/rules.mk | 0 keyboards/sx60/rules.mk | 56 ++++----------- 56 files changed, 203 insertions(+), 1537 deletions(-) delete mode 100644 keyboards/redox/keymaps/default/rules.mk delete mode 100644 keyboards/runner3680/3x6/keymaps/default/rules.mk delete mode 100644 keyboards/runner3680/3x7/keymaps/default/rules.mk delete mode 100644 keyboards/runner3680/3x8/keymaps/default/rules.mk delete mode 100644 keyboards/runner3680/4x6/keymaps/default/rules.mk delete mode 100644 keyboards/runner3680/4x7/keymaps/default/rules.mk delete mode 100644 keyboards/runner3680/4x8/keymaps/default/rules.mk delete mode 100644 keyboards/runner3680/5x6/keymaps/default/rules.mk delete mode 100644 keyboards/runner3680/5x7/keymaps/default/rules.mk delete mode 100644 keyboards/runner3680/5x8/keymaps/JIS/rules.mk delete mode 100644 keyboards/runner3680/5x8/keymaps/default/rules.mk delete mode 100644 keyboards/singa/keymaps/default/rules.mk delete mode 100644 keyboards/singa/keymaps/test/rules.mk delete mode 100644 keyboards/sx60/keymaps/default/rules.mk (limited to 'keyboards/singa') diff --git a/keyboards/rabbit/rabbit68/rules.mk b/keyboards/rabbit/rabbit68/rules.mk index cd08d2319..1bf19e4e1 100644 --- a/keyboards/rabbit/rabbit68/rules.mk +++ b/keyboards/rabbit/rabbit68/rules.mk @@ -1,14 +1,14 @@ # MCU name MCU = atmega32u4 - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = halfkay # Build Options diff --git a/keyboards/redox/keymaps/default/rules.mk b/keyboards/redox/keymaps/default/rules.mk deleted file mode 100644 index a81250cdf..000000000 --- a/keyboards/redox/keymaps/default/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -RGBLIGHT_ENABLE = yes - diff --git a/keyboards/redox/rev1/rules.mk b/keyboards/redox/rev1/rules.mk index f84561674..e69de29bb 100644 --- a/keyboards/redox/rev1/rules.mk +++ b/keyboards/redox/rev1/rules.mk @@ -1 +0,0 @@ -BACKLIGHT_ENABLE = no \ No newline at end of file diff --git a/keyboards/redox/rules.mk b/keyboards/redox/rules.mk index 81c0694e0..165008f1f 100644 --- a/keyboards/redox/rules.mk +++ b/keyboards/redox/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina # Build Options # change yes to no to disable diff --git a/keyboards/redox_w/rules.mk b/keyboards/redox_w/rules.mk index eb4bad194..22e8cb6b3 100644 --- a/keyboards/redox_w/rules.mk +++ b/keyboards/redox_w/rules.mk @@ -1,57 +1,16 @@ - -OPT_DEFS += -DREDOX_W_PROMICRO -INTERPHASE_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ - avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) - -# # project specific files -SRC = matrix.c - - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # comment out to disable the options. # @@ -71,5 +30,12 @@ UNICODE_ENABLE = YES # Unicode USB = /dev/ttyACM0 +OPT_DEFS += -DREDOX_W_PROMICRO +INTERPHASE_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) + +# # project specific files +SRC = matrix.c + # upload: build # $(REDOX_W_UPLOAD_COMMAND) diff --git a/keyboards/redscarf_iiplus/verb/rules.mk b/keyboards/redscarf_iiplus/verb/rules.mk index 6ee7fe438..169e69d39 100755 --- a/keyboards/redscarf_iiplus/verb/rules.mk +++ b/keyboards/redscarf_iiplus/verb/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = qmk-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/redscarf_iiplus/verc/rules.mk b/keyboards/redscarf_iiplus/verc/rules.mk index 5a7706b48..e62b78dc6 100755 --- a/keyboards/redscarf_iiplus/verc/rules.mk +++ b/keyboards/redscarf_iiplus/verc/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = qmk-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -82,4 +35,4 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) CUSTOM_MATRIX = yes SRC += matrix.c -LAYOUTS = 65_ansi \ No newline at end of file +LAYOUTS = 65_ansi diff --git a/keyboards/reviung34/rules.mk b/keyboards/reviung34/rules.mk index 7c3d5f391..67f2386e0 100755 --- a/keyboards/reviung34/rules.mk +++ b/keyboards/reviung34/rules.mk @@ -1,27 +1,16 @@ # MCU name MCU = atmega32u4 - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -42,4 +31,3 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - diff --git a/keyboards/reviung39/keymaps/default/rules.mk b/keyboards/reviung39/keymaps/default/rules.mk index 7ad666d1a..1e3cebb14 100644 --- a/keyboards/reviung39/keymaps/default/rules.mk +++ b/keyboards/reviung39/keymaps/default/rules.mk @@ -1 +1 @@ -RGBLIGHT_ENABLE = yes \ No newline at end of file +RGBLIGHT_ENABLE = yes diff --git a/keyboards/reviung39/keymaps/default_s/rules.mk b/keyboards/reviung39/keymaps/default_s/rules.mk index 7ad666d1a..1e3cebb14 100644 --- a/keyboards/reviung39/keymaps/default_s/rules.mk +++ b/keyboards/reviung39/keymaps/default_s/rules.mk @@ -1 +1 @@ -RGBLIGHT_ENABLE = yes \ No newline at end of file +RGBLIGHT_ENABLE = yes diff --git a/keyboards/reviung39/rules.mk b/keyboards/reviung39/rules.mk index 965556736..67f2386e0 100644 --- a/keyboards/reviung39/rules.mk +++ b/keyboards/reviung39/rules.mk @@ -1,27 +1,16 @@ # MCU name MCU = atmega32u4 - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/rgbkb/sol/keymaps/default/rules.mk b/keyboards/rgbkb/sol/keymaps/default/rules.mk index 203d59c6a..269cf2027 100644 --- a/keyboards/rgbkb/sol/keymaps/default/rules.mk +++ b/keyboards/rgbkb/sol/keymaps/default/rules.mk @@ -7,10 +7,5 @@ # To keep things clean and tidy, as well as make upgrades easier, only place overrides from the defaults in this file. - - - # Do not edit past here - include keyboards/$(KEYBOARD)/post_rules.mk - diff --git a/keyboards/rgbkb/sol/rules.mk b/keyboards/rgbkb/sol/rules.mk index 3be8f0b22..e3d3953df 100644 --- a/keyboards/rgbkb/sol/rules.mk +++ b/keyboards/rgbkb/sol/rules.mk @@ -1,21 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -F_CPU = 16000000 - -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -F_USB = $(F_CPU) - -# Bootloader +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = qmk-dfu -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Custom local font file OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\" diff --git a/keyboards/rgbkb/zen/rules.mk b/keyboards/rgbkb/zen/rules.mk index 7473b61cf..4193d23e0 100644 --- a/keyboards/rgbkb/zen/rules.mk +++ b/keyboards/rgbkb/zen/rules.mk @@ -1,11 +1,15 @@ -# Pro Micro or Elite-C -# Automagically converted to Proton-C +# MCU name MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -BOOTLOADER = dfu -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina ifeq ($(strip $(CTPC)), yes) CONVERT_TO_PROTON_C=yes diff --git a/keyboards/rgbkb/zygomorph/rules.mk b/keyboards/rgbkb/zygomorph/rules.mk index 9bafc7b1d..955221fdf 100644 --- a/keyboards/rgbkb/zygomorph/rules.mk +++ b/keyboards/rgbkb/zygomorph/rules.mk @@ -1,47 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = qmk-dfu -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # change yes to no to disable # diff --git a/keyboards/runner3680/3x6/keymaps/default/rules.mk b/keyboards/runner3680/3x6/keymaps/default/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/3x6/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/3x7/keymaps/default/rules.mk b/keyboards/runner3680/3x7/keymaps/default/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/3x7/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/3x8/keymaps/default/rules.mk b/keyboards/runner3680/3x8/keymaps/default/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/3x8/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/4x6/keymaps/default/rules.mk b/keyboards/runner3680/4x6/keymaps/default/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/4x6/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/4x7/keymaps/default/rules.mk b/keyboards/runner3680/4x7/keymaps/default/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/4x7/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/4x8/keymaps/default/rules.mk b/keyboards/runner3680/4x8/keymaps/default/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/4x8/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/5x6/keymaps/default/rules.mk b/keyboards/runner3680/5x6/keymaps/default/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/5x6/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/5x7/keymaps/default/rules.mk b/keyboards/runner3680/5x7/keymaps/default/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/5x7/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/5x8/keymaps/JIS/rules.mk b/keyboards/runner3680/5x8/keymaps/JIS/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/5x8/keymaps/JIS/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/5x8/keymaps/default/rules.mk b/keyboards/runner3680/5x8/keymaps/default/rules.mk deleted file mode 100644 index 9104ce244..000000000 --- a/keyboards/runner3680/5x8/keymaps/default/rules.mk +++ /dev/null @@ -1 +0,0 @@ -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/runner3680/rules.mk b/keyboards/runner3680/rules.mk index 624dd2e50..3a0b190ae 100644 --- a/keyboards/runner3680/rules.mk +++ b/keyboards/runner3680/rules.mk @@ -1,39 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -F_CPU = 16000000 - -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/s7_elephant/rules.mk b/keyboards/s7_elephant/rules.mk index 7f0ad6d3c..6cbcb56ae 100644 --- a/keyboards/s7_elephant/rules.mk +++ b/keyboards/s7_elephant/rules.mk @@ -1,41 +1,14 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu # Build Options diff --git a/keyboards/scarletbandana/rules.mk b/keyboards/scarletbandana/rules.mk index de3ac9518..a3461f314 100644 --- a/keyboards/scarletbandana/rules.mk +++ b/keyboards/scarletbandana/rules.mk @@ -1,52 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/sck/osa/rules.mk b/keyboards/sck/osa/rules.mk index 3538c25ba..2d4a95c9e 100644 --- a/keyboards/sck/osa/rules.mk +++ b/keyboards/sck/osa/rules.mk @@ -1,8 +1,6 @@ # MCU name MCU = atmega32u4 - - # Bootloader selection # Teensy halfkay # Pro Micro caterina @@ -13,8 +11,6 @@ MCU = atmega32u4 # ATmega328P USBasp BOOTLOADER = atmel-dfu - - # Build Options # change yes to no to disable # diff --git a/keyboards/scythe/rules.mk b/keyboards/scythe/rules.mk index f0beca71e..54f2f7a52 100644 --- a/keyboards/scythe/rules.mk +++ b/keyboards/scythe/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/sentraq/number_pad/rules.mk b/keyboards/sentraq/number_pad/rules.mk index 8678b7f88..8df6c4c7c 100644 --- a/keyboards/sentraq/number_pad/rules.mk +++ b/keyboards/sentraq/number_pad/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/sentraq/s60_x/default/rules.mk b/keyboards/sentraq/s60_x/default/rules.mk index b3fb86179..8b3674cd8 100644 --- a/keyboards/sentraq/s60_x/default/rules.mk +++ b/keyboards/sentraq/s60_x/default/rules.mk @@ -1,52 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -61,5 +25,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 - LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb diff --git a/keyboards/sentraq/s60_x/rgb/rules.mk b/keyboards/sentraq/s60_x/rgb/rules.mk index 39bbc5d28..efd66a1ba 100644 --- a/keyboards/sentraq/s60_x/rgb/rules.mk +++ b/keyboards/sentraq/s60_x/rgb/rules.mk @@ -1,52 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -66,5 +30,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB light - LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb diff --git a/keyboards/sentraq/s65_plus/rules.mk b/keyboards/sentraq/s65_plus/rules.mk index 08dd2d93c..f4da10aa1 100644 --- a/keyboards/sentraq/s65_plus/rules.mk +++ b/keyboards/sentraq/s65_plus/rules.mk @@ -1,53 +1,15 @@ - - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/sentraq/s65_x/rules.mk b/keyboards/sentraq/s65_x/rules.mk index 6ab268dee..a6a2319c2 100644 --- a/keyboards/sentraq/s65_x/rules.mk +++ b/keyboards/sentraq/s65_x/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable diff --git a/keyboards/shiro/rules.mk b/keyboards/shiro/rules.mk index 3ea1516fc..03c1bc8f8 100644 --- a/keyboards/shiro/rules.mk +++ b/keyboards/shiro/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/signum/3_0/elitec/rules.mk b/keyboards/signum/3_0/elitec/rules.mk index 6a68eb443..6393e0f93 100644 --- a/keyboards/signum/3_0/elitec/rules.mk +++ b/keyboards/signum/3_0/elitec/rules.mk @@ -1,48 +1,14 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu # Build Options diff --git a/keyboards/singa/keymaps/default/rules.mk b/keyboards/singa/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb..000000000 diff --git a/keyboards/singa/keymaps/test/rules.mk b/keyboards/singa/keymaps/test/rules.mk deleted file mode 100644 index e69de29bb..000000000 diff --git a/keyboards/sirius/unigo66/rules.mk b/keyboards/sirius/unigo66/rules.mk index c35487b18..53cf934c4 100644 --- a/keyboards/sirius/unigo66/rules.mk +++ b/keyboards/sirius/unigo66/rules.mk @@ -1,17 +1,16 @@ # MCU name MCU = atmega32u4 -F_CPU = 16000000 - -ARCH = AVR8 - -F_USB = $(F_CPU) - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu -# Interrupt driven control endpoint task -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Build Options # comment out to disable the options. # diff --git a/keyboards/sixkeyboard/rules.mk b/keyboards/sixkeyboard/rules.mk index 2befe17d8..5b89ff4e6 100644 --- a/keyboards/sixkeyboard/rules.mk +++ b/keyboards/sixkeyboard/rules.mk @@ -1,5 +1,3 @@ -SRC = matrix.c - # MCU name MCU = atmega16u2 @@ -29,3 +27,5 @@ AUDIO_ENABLE = no UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID CUSTOM_MATRIX = yes + +SRC = matrix.c diff --git a/keyboards/smk60/rules.mk b/keyboards/smk60/rules.mk index 751dbec84..cbb1c8b74 100644 --- a/keyboards/smk60/rules.mk +++ b/keyboards/smk60/rules.mk @@ -1,58 +1,15 @@ # MCU name MCU = atmega32u4 -# project specific files -#SRC = - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -#OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # Build Options # change yes to no to disable diff --git a/keyboards/snagpad/rules.mk b/keyboards/snagpad/rules.mk index 624ed262e..9256eaed1 100644 --- a/keyboards/snagpad/rules.mk +++ b/keyboards/snagpad/rules.mk @@ -1,54 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina -# Boot Section Size in *bytes* -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # comment out to disable the options. # diff --git a/keyboards/snampad/rules.mk b/keyboards/snampad/rules.mk index ec3208fd0..1a1fbe6bc 100644 --- a/keyboards/snampad/rules.mk +++ b/keyboards/snampad/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/southpole/rules.mk b/keyboards/southpole/rules.mk index 356b75bb6..d6b65e960 100644 --- a/keyboards/southpole/rules.mk +++ b/keyboards/southpole/rules.mk @@ -1,45 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = halfkay # Build Options # comment out to disable the options. @@ -53,4 +23,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality #AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no \ No newline at end of file +RGBLIGHT_ENABLE = no diff --git a/keyboards/spacetime/rules.mk b/keyboards/spacetime/rules.mk index 62e8f9955..aa1a88925 100644 --- a/keyboards/spacetime/rules.mk +++ b/keyboards/spacetime/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = caterina - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/speedo/rules.mk b/keyboards/speedo/rules.mk index 6cba6b6b8..4295e2ad7 100644 --- a/keyboards/speedo/rules.mk +++ b/keyboards/speedo/rules.mk @@ -1,51 +1,15 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = halfkay # Build Options # change yes to no to disable diff --git a/keyboards/standaside/rules.mk b/keyboards/standaside/rules.mk index a7ebc21fa..993f0acdc 100644 --- a/keyboards/standaside/rules.mk +++ b/keyboards/standaside/rules.mk @@ -1,53 +1,14 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel_dfu # Build Options @@ -70,4 +31,3 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) RGBLIGHT_ENABLE = yes # Enable RGB underlighting support - diff --git a/keyboards/stella/rules.mk b/keyboards/stella/rules.mk index 2618abf4f..b6b8f8841 100644 --- a/keyboards/stella/rules.mk +++ b/keyboards/stella/rules.mk @@ -1,17 +1,16 @@ # MCU name MCU = atmega32u4 - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -34,4 +33,4 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) # Supported layouts -LAYOUTS = tkl_ansi tkl_iso \ No newline at end of file +LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/suihankey/alpha/rules.mk b/keyboards/suihankey/alpha/rules.mk index d4580058e..1e3cebb14 100644 --- a/keyboards/suihankey/alpha/rules.mk +++ b/keyboards/suihankey/alpha/rules.mk @@ -1,82 +1 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -OLED_DRIVER_ENABLE = yes -SPLIT_KEYBOARD = no +RGBLIGHT_ENABLE = yes diff --git a/keyboards/suihankey/rev1/rules.mk b/keyboards/suihankey/rev1/rules.mk index d4580058e..1e3cebb14 100644 --- a/keyboards/suihankey/rev1/rules.mk +++ b/keyboards/suihankey/rev1/rules.mk @@ -1,82 +1 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -OLED_DRIVER_ENABLE = yes -SPLIT_KEYBOARD = no +RGBLIGHT_ENABLE = yes diff --git a/keyboards/suihankey/rules.mk b/keyboards/suihankey/rules.mk index dbba5b93c..d4c2e54b1 100644 --- a/keyboards/suihankey/rules.mk +++ b/keyboards/suihankey/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/suihankey/split/alpha/rules.mk b/keyboards/suihankey/split/alpha/rules.mk index 974450a69..1e3cebb14 100644 --- a/keyboards/suihankey/split/alpha/rules.mk +++ b/keyboards/suihankey/split/alpha/rules.mk @@ -1,82 +1 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -OLED_DRIVER_ENABLE = no -SPLIT_KEYBOARD = yes +RGBLIGHT_ENABLE = yes diff --git a/keyboards/suihankey/split/rev1/rules.mk b/keyboards/suihankey/split/rev1/rules.mk index 974450a69..1e3cebb14 100644 --- a/keyboards/suihankey/split/rev1/rules.mk +++ b/keyboards/suihankey/split/rev1/rules.mk @@ -1,82 +1 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = atmel-dfu - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -OLED_DRIVER_ENABLE = no -SPLIT_KEYBOARD = yes +RGBLIGHT_ENABLE = yes diff --git a/keyboards/sx60/keymaps/default/rules.mk b/keyboards/sx60/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb..000000000 diff --git a/keyboards/sx60/rules.mk b/keyboards/sx60/rules.mk index 0381293ce..4c711dc88 100755 --- a/keyboards/sx60/rules.mk +++ b/keyboards/sx60/rules.mk @@ -1,49 +1,15 @@ -# # project specific files -SRC = twimaster.c \ - matrix.c - # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. @@ -59,3 +25,7 @@ BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality AUDIO_ENABLE ?= no RGBLIGHT_ENABLE ?= no CUSTOM_MATRIX ?= yes + +# project specific files +SRC = twimaster.c \ + matrix.c -- cgit v1.2.3-70-g09d2 From efa28d0f5cca55b0dfecaddd0860ec3dfeab8bb0 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Tue, 5 Nov 2019 11:05:03 +1100 Subject: Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) * Convert some PS2AVRGB boards to I2C WS2812 driver * Fix Travis failure for bface --- keyboards/ares/ares.c | 72 ++---------------------------- keyboards/ares/rules.mk | 19 +------- keyboards/donutcables/budget96/budget96.c | 71 ++++-------------------------- keyboards/donutcables/budget96/rules.mk | 20 +-------- keyboards/eve/meteor/meteor.c | 50 ++------------------- keyboards/eve/meteor/rules.mk | 19 +------- keyboards/exclusive/e6v2/le_bmc/le_bmc.c | 51 +++------------------ keyboards/exclusive/e6v2/le_bmc/rules.mk | 3 +- keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c | 63 +++----------------------- keyboards/exclusive/e6v2/oe_bmc/rules.mk | 3 +- keyboards/exent/exent.c | 73 ------------------------------- keyboards/exent/rules.mk | 4 +- keyboards/facew/facew.c | 54 +++++++---------------- keyboards/facew/rules.mk | 20 +-------- keyboards/ft/mars80/mars80.c | 52 ++-------------------- keyboards/ft/mars80/rules.mk | 19 +------- keyboards/gray_studio/hb85/hb85.c | 40 +++-------------- keyboards/gray_studio/hb85/rules.mk | 19 +------- keyboards/jj4x4/jj4x4.c | 37 ---------------- keyboards/jj4x4/rules.mk | 19 +------- keyboards/kbdfans/kbdpad/mk1/mk1.c | 2 +- keyboards/kbdfans/kbdpad/mk1/rules.mk | 15 ------- keyboards/panc60/panc60.c | 55 ++++++++--------------- keyboards/panc60/rules.mk | 20 +-------- keyboards/pearl/pearl.c | 52 +++------------------- keyboards/pearl/rules.mk | 20 +-------- keyboards/percent/skog_lite/rules.mk | 19 +------- keyboards/percent/skog_lite/skog_lite.c | 49 ++------------------- keyboards/singa/rules.mk | 19 +------- keyboards/singa/singa.c | 49 ++------------------- keyboards/tgr/alice/alice.c | 39 +---------------- keyboards/tgr/alice/rules.mk | 19 +------- keyboards/tgr/jane/jane.c | 51 +++------------------ keyboards/tgr/jane/rules.mk | 19 +------- keyboards/unikorn/readme.md | 1 - keyboards/unikorn/rules.mk | 19 +------- keyboards/unikorn/unikorn.c | 50 ++------------------- keyboards/winkeyless/bface/bface.c | 49 ++------------------- keyboards/winkeyless/bface/bface.h | 4 +- keyboards/winkeyless/bface/rules.mk | 20 +-------- 40 files changed, 122 insertions(+), 1157 deletions(-) (limited to 'keyboards/singa') diff --git a/keyboards/ares/ares.c b/keyboards/ares/ares.c index 85c7435ed..07276491c 100644 --- a/keyboards/ares/ares.c +++ b/keyboards/ares/ares.c @@ -17,50 +17,12 @@ along with this program. If not, see . #include "ares.h" -#ifdef RGBLIGHT_ENABLE - -#include -#include "i2c_master.h" -#include "rgblight.h" - -extern rgblight_config_t rgblight_config; - -void matrix_init_kb(void) { - i2c_init(); - // call user level keymaps, if any - matrix_init_user(); -} - -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - memset(led, 0, 3 * RGBLED_NUM); - } - - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} - -bool rgb_init = false; - -void matrix_scan_kb(void) { - // if LEDs were previously on before poweroff, turn them back on - if (rgb_init == false && rgblight_config.enable) { - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - rgb_init = true; - } - - rgblight_task(); - matrix_scan_user(); -} - -#endif - #ifdef BACKLIGHT_ENABLE void backlight_init_ports(void) { - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); } void backlight_set(uint8_t level) { @@ -79,29 +41,3 @@ void backlight_set(uint8_t level) { } } #endif - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -/* -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); -} -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -} -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - return process_record_user(keycode, record); -} -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -*/ \ No newline at end of file diff --git a/keyboards/ares/rules.mk b/keyboards/ares/rules.mk index 3ac90cf97..58d36bc67 100644 --- a/keyboards/ares/rules.mk +++ b/keyboards/ares/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = no -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC += i2c_master.c diff --git a/keyboards/donutcables/budget96/budget96.c b/keyboards/donutcables/budget96/budget96.c index 2fc826f09..e9125a3e6 100644 --- a/keyboards/donutcables/budget96/budget96.c +++ b/keyboards/donutcables/budget96/budget96.c @@ -13,61 +13,8 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "budget96.h" - -#ifdef BACKLIGHT_ENABLE -#include "backlight.h" -#endif -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -#include - -#include "action_layer.h" -#include "i2c_master.h" -#include "quantum.h" - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} +#include "budget96.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -76,25 +23,25 @@ void backlight_init_ports(void) { setPinOutput(D4); setPinOutput(D6); - // turn RGB LEDs on + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); } - void backlight_set(uint8_t level) { - if (level == 0) { - // turn RGB LEDs off +void backlight_set(uint8_t level) { + if (level == 0) { + // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { - // turn RGB LEDs on + } else { + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } - } + } +} diff --git a/keyboards/donutcables/budget96/rules.mk b/keyboards/donutcables/budget96/rules.mk index 4f9e0e412..54328d248 100644 --- a/keyboards/donutcables/budget96/rules.mk +++ b/keyboards/donutcables/budget96/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,9 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -SRC = i2c_master.c diff --git a/keyboards/eve/meteor/meteor.c b/keyboards/eve/meteor/meteor.c index 1bd47ef9e..f5ecbad02 100644 --- a/keyboards/eve/meteor/meteor.c +++ b/keyboards/eve/meteor/meteor.c @@ -14,49 +14,7 @@ * along with this program. If not, see . */ -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "meteor.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -73,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/eve/meteor/rules.mk b/keyboards/eve/meteor/rules.mk index e43baee5c..e57c21c85 100644 --- a/keyboards/eve/meteor/rules.mk +++ b/keyboards/eve/meteor/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no -RGBLIGHT_CUSTOM_DRIVER = no +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -QUANTUM_LIB_SRC = i2c_master.c diff --git a/keyboards/exclusive/e6v2/le_bmc/le_bmc.c b/keyboards/exclusive/e6v2/le_bmc/le_bmc.c index 5f7ef25b2..e3b81c81b 100644 --- a/keyboards/exclusive/e6v2/le_bmc/le_bmc.c +++ b/keyboards/exclusive/e6v2/le_bmc/le_bmc.c @@ -13,49 +13,8 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "rgblight.h" -#include "i2c_master.h" -#include "quantum.h" -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "le_bmc.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -72,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } -} \ No newline at end of file + } +} diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index 13a5f1b89..106044ba7 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -24,7 +24,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode @@ -34,4 +34,3 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) OPT_DEFS = -DDEBUG_LEVEL=0 -SRC += i2c_master.c diff --git a/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c index 5357550ae..97d354653 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c +++ b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c @@ -13,57 +13,8 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "oe_bmc.h" -#include "rgblight.h" -#include "i2c_master.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "oe_bmc.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -72,7 +23,7 @@ void backlight_init_ports(void) { setPinOutput(D4); setPinOutput(D6); - // turn RGB LEDs on + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); @@ -80,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { - // turn RGB LEDs off + if (level == 0) { + // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { - // turn RGB LEDs on + } else { + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index 13a5f1b89..106044ba7 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -24,7 +24,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode @@ -34,4 +34,3 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) OPT_DEFS = -DDEBUG_LEVEL=0 -SRC += i2c_master.c diff --git a/keyboards/exent/exent.c b/keyboards/exent/exent.c index 00cd20aff..82066f7e8 100644 --- a/keyboards/exent/exent.c +++ b/keyboards/exent/exent.c @@ -15,76 +15,3 @@ */ #include "exent.h" - -#ifdef RGBLIGHT_ENABLE - -# include -# include "i2c_master.h" -# include "rgblight.h" - -extern rgblight_config_t rgblight_config; - -void matrix_init_kb(void) { - i2c_init(); - // call user level keymaps, if any - matrix_init_user(); -} - -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - memset(led, 0, 3 * RGBLED_NUM); - } - - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} - -bool rgb_init = false; - -void matrix_scan_kb(void) { - // if LEDs were previously on before poweroff, turn them back on - if (rgb_init == false && rgblight_config.enable) { - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - rgb_init = true; - } - - rgblight_task(); - matrix_scan_user(); -} - -#endif - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -/* - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -*/ diff --git a/keyboards/exent/rules.mk b/keyboards/exent/rules.mk index a49f32058..10442b31b 100644 --- a/keyboards/exent/rules.mk +++ b/keyboards/exent/rules.mk @@ -19,10 +19,8 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 -SRC += i2c_master.c - LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/facew/facew.c b/keyboards/facew/facew.c index 7ec56548b..fa58f0cf7 100644 --- a/keyboards/facew/facew.c +++ b/keyboards/facew/facew.c @@ -16,51 +16,31 @@ along with this program. If not, see . */ #include "facew.h" -#ifdef BACKLIGHT_ENABLE -#include "backlight.h" -#endif -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -#include - -#include "action_layer.h" -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} void backlight_init_ports(void) { - DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); } void backlight_set(uint8_t level) { if (level == 0) { // Turn out the lights - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); } else { // Turn on the lights - PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); } } diff --git a/keyboards/facew/rules.mk b/keyboards/facew/rules.mk index c9942e369..c4117d15d 100644 --- a/keyboards/facew/rules.mk +++ b/keyboards/facew/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,11 +19,8 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 -# custom matrix setup -SRC = i2c_master.c - LAYOUTS = 60_ansi diff --git a/keyboards/ft/mars80/mars80.c b/keyboards/ft/mars80/mars80.c index 754345082..8e5127408 100644 --- a/keyboards/ft/mars80/mars80.c +++ b/keyboards/ft/mars80/mars80.c @@ -16,50 +16,6 @@ #include "mars80.h" -#include "rgblight.h" -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output setPinOutput(D0); @@ -75,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } -} \ No newline at end of file + } +} diff --git a/keyboards/ft/mars80/rules.mk b/keyboards/ft/mars80/rules.mk index f1c79b196..de85d62c8 100644 --- a/keyboards/ft/mars80/rules.mk +++ b/keyboards/ft/mars80/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2019 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,10 +19,8 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 -SRC += i2c_master.c - LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/gray_studio/hb85/hb85.c b/keyboards/gray_studio/hb85/hb85.c index 3e4202358..21562b9e0 100644 --- a/keyboards/gray_studio/hb85/hb85.c +++ b/keyboards/gray_studio/hb85/hb85.c @@ -16,33 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include - -#include "rgblight.h" - -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "hb85.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -51,7 +25,7 @@ void backlight_init_ports(void) { setPinOutput(D4); setPinOutput(D6); - // turn RGB LEDs on + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); @@ -59,17 +33,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { - // turn RGB LEDs off + if (level == 0) { + // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { - // turn RGB LEDs on + } else { + // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/gray_studio/hb85/rules.mk b/keyboards/gray_studio/hb85/rules.mk index 5339aad89..ec57b03dc 100644 --- a/keyboards/gray_studio/hb85/rules.mk +++ b/keyboards/gray_studio/hb85/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2019 fcoury -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC += i2c_master.c diff --git a/keyboards/jj4x4/jj4x4.c b/keyboards/jj4x4/jj4x4.c index 265508b2d..6330c89de 100644 --- a/keyboards/jj4x4/jj4x4.c +++ b/keyboards/jj4x4/jj4x4.c @@ -17,40 +17,3 @@ along with this program. If not, see . */ #include "jj4x4.h" - -#ifdef RGBLIGHT_ENABLE - -#include -#include "i2c_master.h" -#include "rgblight.h" - -extern rgblight_config_t rgblight_config; - -void matrix_init_kb(void) { - i2c_init(); - // call user level keymaps, if any - matrix_init_user(); -} -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - memset(led, 0, 3 * RGBLED_NUM); - } - - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} - -bool rgb_init = false; - -void matrix_scan_kb(void) { - // if LEDs were previously on before poweroff, turn them back on - if (rgb_init == false && rgblight_config.enable) { - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - rgb_init = true; - } - - rgblight_task(); - matrix_scan_user(); -} - -#endif diff --git a/keyboards/jj4x4/rules.mk b/keyboards/jj4x4/rules.mk index fedc525f8..aa74cc7c9 100644 --- a/keyboards/jj4x4/rules.mk +++ b/keyboards/jj4x4/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -40,7 +25,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID @@ -48,6 +33,4 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) -SRC += i2c_master.c - LAYOUTS = ortho_4x4 diff --git a/keyboards/kbdfans/kbdpad/mk1/mk1.c b/keyboards/kbdfans/kbdpad/mk1/mk1.c index 71a47b7ba..aa781875c 100644 --- a/keyboards/kbdfans/kbdpad/mk1/mk1.c +++ b/keyboards/kbdfans/kbdpad/mk1/mk1.c @@ -14,7 +14,7 @@ * along with this program. If not, see . */ -#include "quantum.h" +#include "mk1.h" #define NUMLOCK_PIN D0 diff --git a/keyboards/kbdfans/kbdpad/mk1/rules.mk b/keyboards/kbdfans/kbdpad/mk1/rules.mk index f1f740760..b4cd885b1 100644 --- a/keyboards/kbdfans/kbdpad/mk1/rules.mk +++ b/keyboards/kbdfans/kbdpad/mk1/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a diff --git a/keyboards/panc60/panc60.c b/keyboards/panc60/panc60.c index 16674d30d..6bd16a4bd 100644 --- a/keyboards/panc60/panc60.c +++ b/keyboards/panc60/panc60.c @@ -13,52 +13,33 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "panc60.h" -#ifdef BACKLIGHT_ENABLE -#include "backlight.h" -#endif -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -#include - -#include "action_layer.h" -#include "i2c_master.h" -#include "quantum.h" - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif +#include "panc60.h" void backlight_init_ports(void) { - DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); } void backlight_set(uint8_t level) { if (level == 0) { // Turn out the lights - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); } else { // Turn on the lights - PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); } } diff --git a/keyboards/panc60/rules.mk b/keyboards/panc60/rules.mk index cdacb4be7..d3ed4998b 100644 --- a/keyboards/panc60/rules.mk +++ b/keyboards/panc60/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,11 +19,8 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = no BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 -# custom matrix setup -SRC = i2c_master.c - LAYOUTS = 60_ansi 60_hhkb diff --git a/keyboards/pearl/pearl.c b/keyboards/pearl/pearl.c index c8cd8a860..093b5fdd9 100644 --- a/keyboards/pearl/pearl.c +++ b/keyboards/pearl/pearl.c @@ -15,49 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include "rgblight.h" -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "pearl.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -74,17 +32,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } -} \ No newline at end of file + } +} diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk index eacf8bb2c..79b783e42 100644 --- a/keyboards/pearl/rules.mk +++ b/keyboards/pearl/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,9 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -SRC = i2c_master.c diff --git a/keyboards/percent/skog_lite/rules.mk b/keyboards/percent/skog_lite/rules.mk index ed29c47f2..1d2372c77 100644 --- a/keyboards/percent/skog_lite/rules.mk +++ b/keyboards/percent/skog_lite/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,10 +19,8 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 -SRC = i2c_master.c - LAYOUTS = tkl_ansi diff --git a/keyboards/percent/skog_lite/skog_lite.c b/keyboards/percent/skog_lite/skog_lite.c index a77fc9258..a6c00f529 100644 --- a/keyboards/percent/skog_lite/skog_lite.c +++ b/keyboards/percent/skog_lite/skog_lite.c @@ -13,49 +13,8 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "rgblight.h" -#include "i2c_master.h" -#include "quantum.h" -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "skog_lite.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -72,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/singa/rules.mk b/keyboards/singa/rules.mk index df2a59e90..54328d248 100644 --- a/keyboards/singa/rules.mk +++ b/keyboards/singa/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC = i2c_master.c diff --git a/keyboards/singa/singa.c b/keyboards/singa/singa.c index ee49ba65c..144065d02 100644 --- a/keyboards/singa/singa.c +++ b/keyboards/singa/singa.c @@ -13,49 +13,8 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "rgblight.h" -#include "i2c_master.h" -#include "quantum.h" -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "singa.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -72,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/tgr/alice/alice.c b/keyboards/tgr/alice/alice.c index adb88fef0..39aed2cf5 100644 --- a/keyboards/tgr/alice/alice.c +++ b/keyboards/tgr/alice/alice.c @@ -15,41 +15,4 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include - -#include "rgblight.h" - -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void matrix_init_kb(void) { - i2c_init(); - // call user level keymaps, if any - matrix_init_user(); -} - -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - memset(led, 0, 3 * RGBLED_NUM); - } - - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} - -bool rgb_init = false; - -void matrix_scan_kb(void) { - // if LEDs were previously on before poweroff, turn them back on - if (rgb_init == false && rgblight_config.enable) { - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - rgb_init = true; - } - - rgblight_task(); - matrix_scan_user(); -} -#endif +#include "alice.h" diff --git a/keyboards/tgr/alice/rules.mk b/keyboards/tgr/alice/rules.mk index aa141f7c3..530e8ea32 100644 --- a/keyboards/tgr/alice/rules.mk +++ b/keyboards/tgr/alice/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC += i2c_master.c diff --git a/keyboards/tgr/jane/jane.c b/keyboards/tgr/jane/jane.c index c17cb0084..4ab0b3007 100644 --- a/keyboards/tgr/jane/jane.c +++ b/keyboards/tgr/jane/jane.c @@ -13,49 +13,8 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "i2c_master.h" -#include "quantum.h" -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "jane.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -72,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } -} \ No newline at end of file + } +} diff --git a/keyboards/tgr/jane/rules.mk b/keyboards/tgr/jane/rules.mk index f2b488306..c6a26d4a4 100644 --- a/keyboards/tgr/jane/rules.mk +++ b/keyboards/tgr/jane/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,10 +19,8 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no -RGBLIGHT_CUSTOM_DRIVER = no +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 -QUANTUM_LIB_SRC = i2c_master.c - LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/unikorn/readme.md b/keyboards/unikorn/readme.md index 3175cddc2..1f8b16d64 100644 --- a/keyboards/unikorn/readme.md +++ b/keyboards/unikorn/readme.md @@ -18,7 +18,6 @@ To enable RGB lighting support, install the necessary components and set RGBLIGH ``` RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes ``` diff --git a/keyboards/unikorn/rules.mk b/keyboards/unikorn/rules.mk index d4f4d2aaf..e57c21c85 100644 --- a/keyboards/unikorn/rules.mk +++ b/keyboards/unikorn/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no -RGBLIGHT_CUSTOM_DRIVER = no +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC = i2c_master.c diff --git a/keyboards/unikorn/unikorn.c b/keyboards/unikorn/unikorn.c index 1bd47ef9e..70bc5a988 100644 --- a/keyboards/unikorn/unikorn.c +++ b/keyboards/unikorn/unikorn.c @@ -14,49 +14,7 @@ * along with this program. If not, see . */ -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "unikorn.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -73,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/winkeyless/bface/bface.c b/keyboards/winkeyless/bface/bface.c index 1c83be4b8..8cb5b600c 100644 --- a/keyboards/winkeyless/bface/bface.c +++ b/keyboards/winkeyless/bface/bface.c @@ -13,49 +13,8 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "rgblight.h" -#include "i2c_master.h" -#include "quantum.h" -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "bface.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -72,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/winkeyless/bface/bface.h b/keyboards/winkeyless/bface/bface.h index f7a3b9521..bca0c24c1 100644 --- a/keyboards/winkeyless/bface/bface.h +++ b/keyboards/winkeyless/bface/bface.h @@ -18,9 +18,7 @@ along with this program. If not, see . #pragma once -#include "quantum_keycodes.h" -#include "keycode.h" -#include "action.h" +#include "quantum.h" #define LAYOUT_60_ansi( \ K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \ diff --git a/keyboards/winkeyless/bface/rules.mk b/keyboards/winkeyless/bface/rules.mk index 12b502785..506e37ac9 100644 --- a/keyboards/winkeyless/bface/rules.mk +++ b/keyboards/winkeyless/bface/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - # MCU name MCU = atmega32a @@ -36,9 +21,6 @@ BACKLIGHT_ENABLE = yes BACKLIGHT_CUSTOM_DRIVER = yes BACKLIGHT_BREATHING = no RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -SRC = i2c_master.c -- cgit v1.2.3-70-g09d2 From 30473357290747be06e9200a7d9c751738a3b0a1 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 15 Nov 2019 10:21:22 +1100 Subject: Add support for configurable polling interval and power usage o… (#7336) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Add support for custom polling interval and power usage on V-USB boards * Use 1ms as default for now --- keyboards/ares/usbconfig.h | 10 ---------- keyboards/bfake/usbconfig.h | 10 ---------- keyboards/coseyfannitutti/discipad/config.h | 1 + keyboards/coseyfannitutti/discipad/usbconfig.h | 11 ----------- keyboards/coseyfannitutti/discipline/config.h | 1 + keyboards/coseyfannitutti/discipline/usbconfig.h | 11 ----------- keyboards/donutcables/budget96/usbconfig.h | 10 ---------- keyboards/eve/meteor/usbconfig.h | 12 +----------- keyboards/exclusive/e6v2/le_bmc/usbconfig.h | 10 ---------- keyboards/exclusive/e6v2/oe_bmc/usbconfig.h | 10 ---------- keyboards/exent/usbconfig.h | 10 ---------- keyboards/facew/usbconfig.h | 10 ---------- keyboards/ft/mars80/usbconfig.h | 10 ---------- keyboards/gingham/config.h | 1 + keyboards/gingham/usbconfig.h | 11 ----------- keyboards/gray_studio/hb85/usbconfig.h | 10 ---------- keyboards/handwired/hnah40/config.h | 2 ++ keyboards/handwired/hnah40/usbconfig.h | 11 ----------- keyboards/jc65/v32a/usbconfig.h | 10 ---------- keyboards/jj40/config.h | 1 + keyboards/jj40/usbconfig.h | 11 ----------- keyboards/jj4x4/config.h | 1 + keyboards/jj4x4/usbconfig.h | 11 ----------- keyboards/jj50/usbconfig.h | 10 ---------- keyboards/kbdfans/kbdpad/mk1/usbconfig.h | 10 ---------- keyboards/mechmini/v1/usbconfig.h | 10 ---------- keyboards/mehkee96/usbconfig.h | 10 ---------- keyboards/mt40/usbconfig.h | 10 ---------- keyboards/panc60/usbconfig.h | 10 ---------- keyboards/pearl/usbconfig.h | 10 ---------- keyboards/percent/canoe/usbconfig.h | 10 ---------- keyboards/percent/skog/usbconfig.h | 10 ---------- keyboards/percent/skog_lite/usbconfig.h | 10 ---------- keyboards/plaid/config.h | 1 + keyboards/plaid/usbconfig.h | 11 ----------- keyboards/singa/usbconfig.h | 10 ---------- keyboards/tgr/alice/usbconfig.h | 10 ---------- keyboards/tgr/jane/usbconfig.h | 10 ---------- keyboards/unikorn/usbconfig.h | 10 ---------- keyboards/winkeyless/bface/usbconfig.h | 10 ---------- keyboards/winkeyless/bmini/usbconfig.h | 10 ---------- keyboards/winkeyless/bminiex/usbconfig.h | 10 ---------- keyboards/ymd75/usbconfig.h | 10 ---------- keyboards/ymd96/config.h | 1 + keyboards/ymd96/usbconfig.h | 11 ----------- keyboards/ymdk/bface/usbconfig.h | 10 ---------- keyboards/ymdk_np21/config.h | 2 ++ keyboards/ymdk_np21/usbconfig.h | 11 ----------- quantum/template/ps2avrgb/usbconfig.h | 10 ---------- tmk_core/protocol/vusb/vusb.c | 15 ++++++++++++--- 50 files changed, 24 insertions(+), 413 deletions(-) (limited to 'keyboards/singa') diff --git a/keyboards/ares/usbconfig.h b/keyboards/ares/usbconfig.h index 89b7ffbaa..c6e0b8f81 100644 --- a/keyboards/ares/usbconfig.h +++ b/keyboards/ares/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/bfake/usbconfig.h b/keyboards/bfake/usbconfig.h index d2d848fcd..f6c85cc69 100644 --- a/keyboards/bfake/usbconfig.h +++ b/keyboards/bfake/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/coseyfannitutti/discipad/config.h b/keyboards/coseyfannitutti/discipad/config.h index ffa06ee25..7fe091582 100644 --- a/keyboards/coseyfannitutti/discipad/config.h +++ b/keyboards/coseyfannitutti/discipad/config.h @@ -50,6 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define NO_UART 1 +#define USB_MAX_POWER_CONSUMPTION 100 /* * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. diff --git a/keyboards/coseyfannitutti/discipad/usbconfig.h b/keyboards/coseyfannitutti/discipad/usbconfig.h index 505f0e5c8..0ae42cac8 100644 --- a/keyboards/coseyfannitutti/discipad/usbconfig.h +++ b/keyboards/coseyfannitutti/discipad/usbconfig.h @@ -109,21 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -// max power draw with maxed white underglow measured at 120 mA (peaks) -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/coseyfannitutti/discipline/config.h b/keyboards/coseyfannitutti/discipline/config.h index b3386f94d..46dd49c51 100644 --- a/keyboards/coseyfannitutti/discipline/config.h +++ b/keyboards/coseyfannitutti/discipline/config.h @@ -48,6 +48,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define NO_UART 1 +#define USB_MAX_POWER_CONSUMPTION 100 /* * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. diff --git a/keyboards/coseyfannitutti/discipline/usbconfig.h b/keyboards/coseyfannitutti/discipline/usbconfig.h index f20ad2f9c..a52f1c1b2 100644 --- a/keyboards/coseyfannitutti/discipline/usbconfig.h +++ b/keyboards/coseyfannitutti/discipline/usbconfig.h @@ -109,21 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -// max power draw with maxed white underglow measured at 120 mA (peaks) -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/donutcables/budget96/usbconfig.h b/keyboards/donutcables/budget96/usbconfig.h index 223b69bb9..c290b434b 100644 --- a/keyboards/donutcables/budget96/usbconfig.h +++ b/keyboards/donutcables/budget96/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/eve/meteor/usbconfig.h b/keyboards/eve/meteor/usbconfig.h index da9b2b719..fd5d95e2e 100644 --- a/keyboards/eve/meteor/usbconfig.h +++ b/keyboards/eve/meteor/usbconfig.h @@ -98,20 +98,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of @@ -380,4 +370,4 @@ section at the end of this file). #define USB_INTR_ENABLE_BIT INT1 /* #define USB_INTR_PENDING EIFR */ #define USB_INTR_PENDING_BIT INTF1 -#define USB_INTR_VECTOR INT1_vect \ No newline at end of file +#define USB_INTR_VECTOR INT1_vect diff --git a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h index f22f2b631..30c5f55eb 100644 --- a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h index f22f2b631..30c5f55eb 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/exent/usbconfig.h b/keyboards/exent/usbconfig.h index 9ef232f04..75f318b99 100644 --- a/keyboards/exent/usbconfig.h +++ b/keyboards/exent/usbconfig.h @@ -98,20 +98,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/facew/usbconfig.h b/keyboards/facew/usbconfig.h index f3d663f8a..d787d76ea 100644 --- a/keyboards/facew/usbconfig.h +++ b/keyboards/facew/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/ft/mars80/usbconfig.h b/keyboards/ft/mars80/usbconfig.h index 338b67f58..12018ee3b 100644 --- a/keyboards/ft/mars80/usbconfig.h +++ b/keyboards/ft/mars80/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/gingham/config.h b/keyboards/gingham/config.h index 53601e8ca..d89120c28 100644 --- a/keyboards/gingham/config.h +++ b/keyboards/gingham/config.h @@ -51,6 +51,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define NO_UART 1 +#define USB_MAX_POWER_CONSUMPTION 100 /* * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. diff --git a/keyboards/gingham/usbconfig.h b/keyboards/gingham/usbconfig.h index 30cdd3698..7b408693d 100644 --- a/keyboards/gingham/usbconfig.h +++ b/keyboards/gingham/usbconfig.h @@ -109,21 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -// max power draw with maxed white underglow measured at 120 mA (peaks) -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/gray_studio/hb85/usbconfig.h b/keyboards/gray_studio/hb85/usbconfig.h index c52c90ce8..725a47ac3 100644 --- a/keyboards/gray_studio/hb85/usbconfig.h +++ b/keyboards/gray_studio/hb85/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/handwired/hnah40/config.h b/keyboards/handwired/hnah40/config.h index b7a4105d0..3d3c05fd4 100644 --- a/keyboards/handwired/hnah40/config.h +++ b/keyboards/handwired/hnah40/config.h @@ -78,6 +78,8 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE +#define USB_MAX_POWER_CONSUMPTION 100 + /* * Force NKRO * diff --git a/keyboards/handwired/hnah40/usbconfig.h b/keyboards/handwired/hnah40/usbconfig.h index cbd37c34d..996c4584b 100644 --- a/keyboards/handwired/hnah40/usbconfig.h +++ b/keyboards/handwired/hnah40/usbconfig.h @@ -109,21 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -// max power draw with maxed white underglow measured at 120 mA (peaks) -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/jc65/v32a/usbconfig.h b/keyboards/jc65/v32a/usbconfig.h index d2d848fcd..f6c85cc69 100644 --- a/keyboards/jc65/v32a/usbconfig.h +++ b/keyboards/jc65/v32a/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index c068685a4..8efbc7ba2 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -45,6 +45,7 @@ along with this program. If not, see . #define DEBOUNCE 5 #define NO_UART 1 +#define USB_MAX_POWER_CONSUMPTION 100 /* key combination for magic key command */ /* defined by default; to change, uncomment and set to the combination you want */ diff --git a/keyboards/jj40/usbconfig.h b/keyboards/jj40/usbconfig.h index ad97e7f0a..d1fb1f517 100644 --- a/keyboards/jj40/usbconfig.h +++ b/keyboards/jj40/usbconfig.h @@ -109,21 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -// max power draw with maxed white underglow measured at 120 mA (peaks) -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index 80fa07d3b..423d6653e 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -48,6 +48,7 @@ along with this program. If not, see . #define DEBOUNCE 5 #define NO_UART 1 +#define USB_MAX_POWER_CONSUMPTION 100 /* key combination for magic key command */ /* defined by default; to change, uncomment and set to the combination you want */ diff --git a/keyboards/jj4x4/usbconfig.h b/keyboards/jj4x4/usbconfig.h index a7653bde8..1a5ad4056 100644 --- a/keyboards/jj4x4/usbconfig.h +++ b/keyboards/jj4x4/usbconfig.h @@ -109,21 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -// max power draw with maxed white underglow measured at 120 mA (peaks) -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/jj50/usbconfig.h b/keyboards/jj50/usbconfig.h index 59f29d04d..0618bbca8 100644 --- a/keyboards/jj50/usbconfig.h +++ b/keyboards/jj50/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/kbdfans/kbdpad/mk1/usbconfig.h b/keyboards/kbdfans/kbdpad/mk1/usbconfig.h index 54a7d20f1..782c2ff1a 100644 --- a/keyboards/kbdfans/kbdpad/mk1/usbconfig.h +++ b/keyboards/kbdfans/kbdpad/mk1/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/mechmini/v1/usbconfig.h b/keyboards/mechmini/v1/usbconfig.h index d2d848fcd..f6c85cc69 100644 --- a/keyboards/mechmini/v1/usbconfig.h +++ b/keyboards/mechmini/v1/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/mehkee96/usbconfig.h b/keyboards/mehkee96/usbconfig.h index d2d848fcd..f6c85cc69 100644 --- a/keyboards/mehkee96/usbconfig.h +++ b/keyboards/mehkee96/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/mt40/usbconfig.h b/keyboards/mt40/usbconfig.h index 498b01fd9..797e410a5 100644 --- a/keyboards/mt40/usbconfig.h +++ b/keyboards/mt40/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/panc60/usbconfig.h b/keyboards/panc60/usbconfig.h index 54a7d20f1..782c2ff1a 100644 --- a/keyboards/panc60/usbconfig.h +++ b/keyboards/panc60/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/pearl/usbconfig.h b/keyboards/pearl/usbconfig.h index 54a7d20f1..782c2ff1a 100644 --- a/keyboards/pearl/usbconfig.h +++ b/keyboards/pearl/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/percent/canoe/usbconfig.h b/keyboards/percent/canoe/usbconfig.h index d2d848fcd..f6c85cc69 100644 --- a/keyboards/percent/canoe/usbconfig.h +++ b/keyboards/percent/canoe/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/percent/skog/usbconfig.h b/keyboards/percent/skog/usbconfig.h index 481d7c0b1..3fb8e46ab 100644 --- a/keyboards/percent/skog/usbconfig.h +++ b/keyboards/percent/skog/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/percent/skog_lite/usbconfig.h b/keyboards/percent/skog_lite/usbconfig.h index 54a7d20f1..782c2ff1a 100644 --- a/keyboards/percent/skog_lite/usbconfig.h +++ b/keyboards/percent/skog_lite/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/plaid/config.h b/keyboards/plaid/config.h index 9da31d700..8fa8aa85b 100644 --- a/keyboards/plaid/config.h +++ b/keyboards/plaid/config.h @@ -50,6 +50,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define NO_UART 1 +#define USB_MAX_POWER_CONSUMPTION 100 /* * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. diff --git a/keyboards/plaid/usbconfig.h b/keyboards/plaid/usbconfig.h index ea9fdd8ea..c505c7f66 100644 --- a/keyboards/plaid/usbconfig.h +++ b/keyboards/plaid/usbconfig.h @@ -109,21 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -// max power draw with maxed white underglow measured at 120 mA (peaks) -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/singa/usbconfig.h b/keyboards/singa/usbconfig.h index 54a7d20f1..782c2ff1a 100644 --- a/keyboards/singa/usbconfig.h +++ b/keyboards/singa/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/tgr/alice/usbconfig.h b/keyboards/tgr/alice/usbconfig.h index df7a88e3a..8d6cbe016 100644 --- a/keyboards/tgr/alice/usbconfig.h +++ b/keyboards/tgr/alice/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/tgr/jane/usbconfig.h b/keyboards/tgr/jane/usbconfig.h index 54a7d20f1..782c2ff1a 100644 --- a/keyboards/tgr/jane/usbconfig.h +++ b/keyboards/tgr/jane/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/unikorn/usbconfig.h b/keyboards/unikorn/usbconfig.h index 41ce167a8..29a3bd06e 100644 --- a/keyboards/unikorn/usbconfig.h +++ b/keyboards/unikorn/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/winkeyless/bface/usbconfig.h b/keyboards/winkeyless/bface/usbconfig.h index 192d80d91..2109bb14d 100644 --- a/keyboards/winkeyless/bface/usbconfig.h +++ b/keyboards/winkeyless/bface/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/winkeyless/bmini/usbconfig.h b/keyboards/winkeyless/bmini/usbconfig.h index d2d848fcd..f6c85cc69 100644 --- a/keyboards/winkeyless/bmini/usbconfig.h +++ b/keyboards/winkeyless/bmini/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/winkeyless/bminiex/usbconfig.h b/keyboards/winkeyless/bminiex/usbconfig.h index d2d848fcd..f6c85cc69 100644 --- a/keyboards/winkeyless/bminiex/usbconfig.h +++ b/keyboards/winkeyless/bminiex/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/ymd75/usbconfig.h b/keyboards/ymd75/usbconfig.h index 73afb18e6..271ab70dc 100644 --- a/keyboards/ymd75/usbconfig.h +++ b/keyboards/ymd75/usbconfig.h @@ -109,20 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/ymd96/config.h b/keyboards/ymd96/config.h index 58169196b..25cf19ac4 100644 --- a/keyboards/ymd96/config.h +++ b/keyboards/ymd96/config.h @@ -42,6 +42,7 @@ along with this program. If not, see . #define TAPPING_TOGGLE 3 #define NO_UART 1 +#define USB_MAX_POWER_CONSUMPTION 100 /* RGB underglow */ // The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. diff --git a/keyboards/ymd96/usbconfig.h b/keyboards/ymd96/usbconfig.h index a90a36f08..a218829a6 100644 --- a/keyboards/ymd96/usbconfig.h +++ b/keyboards/ymd96/usbconfig.h @@ -109,21 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -// max power draw with maxed white underglow measured at 120 mA (peaks) -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/ymdk/bface/usbconfig.h b/keyboards/ymdk/bface/usbconfig.h index c9d0fe4d9..24191f5e3 100644 --- a/keyboards/ymdk/bface/usbconfig.h +++ b/keyboards/ymdk/bface/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/keyboards/ymdk_np21/config.h b/keyboards/ymdk_np21/config.h index 5982b6c53..30ba40081 100644 --- a/keyboards/ymdk_np21/config.h +++ b/keyboards/ymdk_np21/config.h @@ -41,6 +41,8 @@ along with this program. If not, see . #define NO_UART 1 +#define USB_MAX_POWER_CONSUMPTION 100 + /* RGB underglow */ // The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. // The same pin is used on the JJ40, at least. diff --git a/keyboards/ymdk_np21/usbconfig.h b/keyboards/ymdk_np21/usbconfig.h index ad97e7f0a..d1fb1f517 100644 --- a/keyboards/ymdk_np21/usbconfig.h +++ b/keyboards/ymdk_np21/usbconfig.h @@ -109,21 +109,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -// max power draw with maxed white underglow measured at 120 mA (peaks) -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/quantum/template/ps2avrgb/usbconfig.h b/quantum/template/ps2avrgb/usbconfig.h index 9ef232f04..75f318b99 100644 --- a/quantum/template/ps2avrgb/usbconfig.h +++ b/quantum/template/ps2avrgb/usbconfig.h @@ -98,20 +98,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c index 3719b7aa0..72445e00b 100644 --- a/tmk_core/protocol/vusb/vusb.c +++ b/tmk_core/protocol/vusb/vusb.c @@ -345,6 +345,15 @@ const PROGMEM uchar mouse_hid_report[] = { 0xc0, // END_COLLECTION }; +#ifndef USB_MAX_POWER_CONSUMPTION +# define USB_MAX_POWER_CONSUMPTION 500 +#endif + +// TODO: change this to 10ms to match LUFA +#ifndef USB_POLLING_INTERVAL_MS +# define USB_POLLING_INTERVAL_MS 1 +#endif + /* * Descriptor for compite device: Keyboard + Mouse * @@ -366,7 +375,7 @@ const PROGMEM char usbDescriptorConfiguration[] = { # else (1 << 7), /* attributes */ # endif - USB_CFG_MAX_BUS_POWER / 2, /* max USB current in 2mA units */ + USB_MAX_POWER_CONSUMPTION / 2, /* max USB current in 2mA units */ /* * Keyboard interface @@ -393,7 +402,7 @@ const PROGMEM char usbDescriptorConfiguration[] = { (char)0x81, /* IN endpoint number 1 */ 0x03, /* attrib: Interrupt endpoint */ 8, 0, /* maximum packet size */ - USB_CFG_INTR_POLL_INTERVAL, /* in ms */ + USB_POLLING_INTERVAL_MS, /* in ms */ # endif /* @@ -424,7 +433,7 @@ const PROGMEM char usbDescriptorConfiguration[] = { (char)(0x80 | USB_CFG_EP3_NUMBER), /* IN endpoint number 3 */ 0x03, /* attrib: Interrupt endpoint */ 8, 0, /* maximum packet size */ - USB_CFG_INTR_POLL_INTERVAL, /* in ms */ + USB_POLLING_INTERVAL_MS, /* in ms */ # endif }; #endif -- cgit v1.2.3-70-g09d2 From 519df78cdbf7211b9e1ac6b961b0e10bb5164914 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 15 Nov 2019 10:21:53 +1100 Subject: Set device version from config.h for V-USB boards (#7316) --- keyboards/ares/config.h | 1 + keyboards/ares/usbconfig.h | 2 +- keyboards/bfake/config.h | 1 + keyboards/bfake/usbconfig.h | 2 +- keyboards/coseyfannitutti/discipad/usbconfig.h | 2 +- keyboards/coseyfannitutti/discipline/usbconfig.h | 2 +- keyboards/donutcables/budget96/config.h | 1 + keyboards/donutcables/budget96/usbconfig.h | 2 +- keyboards/eve/meteor/config.h | 1 + keyboards/eve/meteor/usbconfig.h | 2 +- keyboards/exclusive/e6v2/le_bmc/usbconfig.h | 2 +- keyboards/exclusive/e6v2/oe_bmc/usbconfig.h | 2 +- keyboards/exent/usbconfig.h | 2 +- keyboards/facew/config.h | 1 + keyboards/facew/usbconfig.h | 2 +- keyboards/ft/mars80/usbconfig.h | 2 +- keyboards/gingham/usbconfig.h | 2 +- keyboards/gray_studio/hb85/config.h | 1 + keyboards/gray_studio/hb85/usbconfig.h | 2 +- keyboards/handwired/hnah40/usbconfig.h | 2 +- keyboards/jc65/v32a/config.h | 1 + keyboards/jc65/v32a/usbconfig.h | 2 +- keyboards/jj40/config.h | 1 + keyboards/jj40/usbconfig.h | 2 +- keyboards/jj4x4/config.h | 1 + keyboards/jj4x4/usbconfig.h | 2 +- keyboards/jj50/config.h | 1 + keyboards/jj50/usbconfig.h | 2 +- keyboards/kbdfans/kbdpad/mk1/config.h | 1 + keyboards/kbdfans/kbdpad/mk1/usbconfig.h | 2 +- keyboards/mechmini/v1/usbconfig.h | 2 +- keyboards/mehkee96/config.h | 1 + keyboards/mehkee96/usbconfig.h | 2 +- keyboards/mt40/usbconfig.h | 2 +- keyboards/panc60/config.h | 1 + keyboards/panc60/usbconfig.h | 2 +- keyboards/pearl/config.h | 1 + keyboards/pearl/usbconfig.h | 2 +- keyboards/percent/canoe/config.h | 1 + keyboards/percent/canoe/usbconfig.h | 2 +- keyboards/percent/skog/config.h | 1 + keyboards/percent/skog/usbconfig.h | 2 +- keyboards/percent/skog_lite/config.h | 1 + keyboards/percent/skog_lite/usbconfig.h | 2 +- keyboards/plaid/usbconfig.h | 2 +- keyboards/singa/config.h | 1 + keyboards/singa/usbconfig.h | 2 +- keyboards/tgr/alice/config.h | 1 + keyboards/tgr/alice/usbconfig.h | 2 +- keyboards/tgr/jane/config.h | 1 + keyboards/tgr/jane/usbconfig.h | 2 +- keyboards/unikorn/config.h | 1 + keyboards/unikorn/usbconfig.h | 2 +- keyboards/winkeyless/bface/config.h | 1 + keyboards/winkeyless/bface/usbconfig.h | 2 +- keyboards/winkeyless/bmini/config.h | 1 + keyboards/winkeyless/bmini/usbconfig.h | 2 +- keyboards/winkeyless/bminiex/config.h | 1 + keyboards/winkeyless/bminiex/usbconfig.h | 2 +- keyboards/ymd75/config.h | 1 + keyboards/ymd75/usbconfig.h | 2 +- keyboards/ymd96/config.h | 1 + keyboards/ymd96/usbconfig.h | 2 +- keyboards/ymdk/bface/config.h | 1 + keyboards/ymdk/bface/usbconfig.h | 2 +- keyboards/ymdk_np21/config.h | 1 + keyboards/ymdk_np21/usbconfig.h | 2 +- quantum/template/ps2avrgb/usbconfig.h | 2 +- 68 files changed, 68 insertions(+), 40 deletions(-) (limited to 'keyboards/singa') diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h index dd01d1565..f0aa926ea 100644 --- a/keyboards/ares/config.h +++ b/keyboards/ares/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER LSJ #define PRODUCT QMK Firmware for Ares diff --git a/keyboards/ares/usbconfig.h b/keyboards/ares/usbconfig.h index c6e0b8f81..7c85ff22c 100644 --- a/keyboards/ares/usbconfig.h +++ b/keyboards/ares/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'L', 'S', 'J' diff --git a/keyboards/bfake/config.h b/keyboards/bfake/config.h index 8a43aacd9..0a8911b09 100644 --- a/keyboards/bfake/config.h +++ b/keyboards/bfake/config.h @@ -22,6 +22,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER NotActuallyWinkeyless #define PRODUCT b.fake diff --git a/keyboards/bfake/usbconfig.h b/keyboards/bfake/usbconfig.h index f6c85cc69..85a915bb4 100644 --- a/keyboards/bfake/usbconfig.h +++ b/keyboards/bfake/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/coseyfannitutti/discipad/usbconfig.h b/keyboards/coseyfannitutti/discipad/usbconfig.h index 0ae42cac8..510658b44 100644 --- a/keyboards/coseyfannitutti/discipad/usbconfig.h +++ b/keyboards/coseyfannitutti/discipad/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x01, 0x00 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i' diff --git a/keyboards/coseyfannitutti/discipline/usbconfig.h b/keyboards/coseyfannitutti/discipline/usbconfig.h index a52f1c1b2..da3ed4607 100644 --- a/keyboards/coseyfannitutti/discipline/usbconfig.h +++ b/keyboards/coseyfannitutti/discipline/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x01, 0x00 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i' diff --git a/keyboards/donutcables/budget96/config.h b/keyboards/donutcables/budget96/config.h index b8772fc86..127e542f1 100644 --- a/keyboards/donutcables/budget96/config.h +++ b/keyboards/donutcables/budget96/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER DonutCables #define PRODUCT budget96 diff --git a/keyboards/donutcables/budget96/usbconfig.h b/keyboards/donutcables/budget96/usbconfig.h index c290b434b..03ec48972 100644 --- a/keyboards/donutcables/budget96/usbconfig.h +++ b/keyboards/donutcables/budget96/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'D', 'o', 'n', 'u', 't', 'C', 'a', 'b', 'l', 'e', 's' diff --git a/keyboards/eve/meteor/config.h b/keyboards/eve/meteor/config.h index c948216af..b23bc877f 100644 --- a/keyboards/eve/meteor/config.h +++ b/keyboards/eve/meteor/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER EVE #define PRODUCT Meteor diff --git a/keyboards/eve/meteor/usbconfig.h b/keyboards/eve/meteor/usbconfig.h index fd5d95e2e..9b045607f 100644 --- a/keyboards/eve/meteor/usbconfig.h +++ b/keyboards/eve/meteor/usbconfig.h @@ -217,7 +217,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h index 30c5f55eb..7a1471a06 100644 --- a/keyboards/exclusive/e6v2/le_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/le_bmc/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e' diff --git a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h index 30c5f55eb..7a1471a06 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e' diff --git a/keyboards/exent/usbconfig.h b/keyboards/exent/usbconfig.h index 75f318b99..83ad06544 100644 --- a/keyboards/exent/usbconfig.h +++ b/keyboards/exent/usbconfig.h @@ -217,7 +217,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h index 62ba98be5..9a31f9278 100644 --- a/keyboards/facew/config.h +++ b/keyboards/facew/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER NotActuallyWinkeyless #define PRODUCT facew diff --git a/keyboards/facew/usbconfig.h b/keyboards/facew/usbconfig.h index d787d76ea..47755fa8c 100644 --- a/keyboards/facew/usbconfig.h +++ b/keyboards/facew/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'S', 'p', 'r', 'i', 't' diff --git a/keyboards/ft/mars80/usbconfig.h b/keyboards/ft/mars80/usbconfig.h index 12018ee3b..4430d9e67 100644 --- a/keyboards/ft/mars80/usbconfig.h +++ b/keyboards/ft/mars80/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'f', 't' diff --git a/keyboards/gingham/usbconfig.h b/keyboards/gingham/usbconfig.h index 7b408693d..3c7aa0da0 100644 --- a/keyboards/gingham/usbconfig.h +++ b/keyboards/gingham/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x01, 0x00 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'Y','i','a','n','c','a','r','-','D','e', 's', 'i', 'g', 'n', 's' diff --git a/keyboards/gray_studio/hb85/config.h b/keyboards/gray_studio/hb85/config.h index da230f7e8..dff360ec6 100644 --- a/keyboards/gray_studio/hb85/config.h +++ b/keyboards/gray_studio/hb85/config.h @@ -19,6 +19,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422F +#define DEVICE_VER 0x0200 #define MANUFACTURER Gray Studio #define PRODUCT HB85 diff --git a/keyboards/gray_studio/hb85/usbconfig.h b/keyboards/gray_studio/hb85/usbconfig.h index 725a47ac3..186e2dca3 100644 --- a/keyboards/gray_studio/hb85/usbconfig.h +++ b/keyboards/gray_studio/hb85/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'G', 'r', 'a', 'y', ' ', 'S', 't', 'u', 'd', 'i', 'o' diff --git a/keyboards/handwired/hnah40/usbconfig.h b/keyboards/handwired/hnah40/usbconfig.h index 996c4584b..b26a3c7d6 100644 --- a/keyboards/handwired/hnah40/usbconfig.h +++ b/keyboards/handwired/hnah40/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x01 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'H','n','a','h','K','B' diff --git a/keyboards/jc65/v32a/config.h b/keyboards/jc65/v32a/config.h index e91f46aeb..444ebad07 100644 --- a/keyboards/jc65/v32a/config.h +++ b/keyboards/jc65/v32a/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x1234 #define PRODUCT_ID 0x5679 +#define DEVICE_VER 0x0200 #define MANUFACTURER winkeyless.kr #define PRODUCT JC65 PS2AVRGB diff --git a/keyboards/jc65/v32a/usbconfig.h b/keyboards/jc65/v32a/usbconfig.h index f6c85cc69..85a915bb4 100644 --- a/keyboards/jc65/v32a/usbconfig.h +++ b/keyboards/jc65/v32a/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/jj40/config.h b/keyboards/jj40/config.h index 8efbc7ba2..2310ce87e 100644 --- a/keyboards/jj40/config.h +++ b/keyboards/jj40/config.h @@ -18,6 +18,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 // TODO: share these strings with usbconfig.h // Edit usbconfig.h to change these. #define MANUFACTURER Kprepublic diff --git a/keyboards/jj40/usbconfig.h b/keyboards/jj40/usbconfig.h index d1fb1f517..4599c03dc 100644 --- a/keyboards/jj40/usbconfig.h +++ b/keyboards/jj40/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index 423d6653e..8918e60da 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 // TODO: share these strings with usbconfig.h // Edit usbconfig.h to change these. #define MANUFACTURER Kprepublic diff --git a/keyboards/jj4x4/usbconfig.h b/keyboards/jj4x4/usbconfig.h index 1a5ad4056..96bf2eda8 100644 --- a/keyboards/jj4x4/usbconfig.h +++ b/keyboards/jj4x4/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/jj50/config.h b/keyboards/jj50/config.h index 0d35e3129..dfd8a4a8f 100644 --- a/keyboards/jj50/config.h +++ b/keyboards/jj50/config.h @@ -24,6 +24,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 // TODO: share these strings with usbconfig.h // Edit usbconfig.h to change these. #define MANUFACTURER kprepublic diff --git a/keyboards/jj50/usbconfig.h b/keyboards/jj50/usbconfig.h index 0618bbca8..b05fc975e 100644 --- a/keyboards/jj50/usbconfig.h +++ b/keyboards/jj50/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'K', 'P', 'R', 'e', 'p', 'u', 'b', 'l', 'i', 'c' diff --git a/keyboards/kbdfans/kbdpad/mk1/config.h b/keyboards/kbdfans/kbdpad/mk1/config.h index 1f0b371af..d41ec6001 100644 --- a/keyboards/kbdfans/kbdpad/mk1/config.h +++ b/keyboards/kbdfans/kbdpad/mk1/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER KBDfans #define PRODUCT KBDPAD-MKI diff --git a/keyboards/kbdfans/kbdpad/mk1/usbconfig.h b/keyboards/kbdfans/kbdpad/mk1/usbconfig.h index 782c2ff1a..e65d210ac 100644 --- a/keyboards/kbdfans/kbdpad/mk1/usbconfig.h +++ b/keyboards/kbdfans/kbdpad/mk1/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/mechmini/v1/usbconfig.h b/keyboards/mechmini/v1/usbconfig.h index f6c85cc69..85a915bb4 100644 --- a/keyboards/mechmini/v1/usbconfig.h +++ b/keyboards/mechmini/v1/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/mehkee96/config.h b/keyboards/mehkee96/config.h index 334358aad..4adfcc86b 100644 --- a/keyboards/mehkee96/config.h +++ b/keyboards/mehkee96/config.h @@ -5,6 +5,7 @@ /* USB Device descriptor parameter */ #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER mehkee #define PRODUCT 96kee diff --git a/keyboards/mehkee96/usbconfig.h b/keyboards/mehkee96/usbconfig.h index f6c85cc69..85a915bb4 100644 --- a/keyboards/mehkee96/usbconfig.h +++ b/keyboards/mehkee96/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/mt40/usbconfig.h b/keyboards/mt40/usbconfig.h index 797e410a5..e1f5f2ea4 100644 --- a/keyboards/mt40/usbconfig.h +++ b/keyboards/mt40/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x03 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'T', 'h', 'o', 'm', 'a', 's', 'D', 'e', 'h', 'a', 'e', 'z', 'e' diff --git a/keyboards/panc60/config.h b/keyboards/panc60/config.h index 921d8da30..c565f39bc 100644 --- a/keyboards/panc60/config.h +++ b/keyboards/panc60/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER Panc Interactive #define PRODUCT panc60 diff --git a/keyboards/panc60/usbconfig.h b/keyboards/panc60/usbconfig.h index 782c2ff1a..e65d210ac 100644 --- a/keyboards/panc60/usbconfig.h +++ b/keyboards/panc60/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 3dbe5ee03..0ae69e8e2 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0348 +#define DEVICE_VER 0x0200 #define MANUFACTURER Pearl Boards #define PRODUCT Pearl #define DESCRIPTION 40% keyboard diff --git a/keyboards/pearl/usbconfig.h b/keyboards/pearl/usbconfig.h index 782c2ff1a..e65d210ac 100644 --- a/keyboards/pearl/usbconfig.h +++ b/keyboards/pearl/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/percent/canoe/config.h b/keyboards/percent/canoe/config.h index 45581b549..bae6ed20f 100644 --- a/keyboards/percent/canoe/config.h +++ b/keyboards/percent/canoe/config.h @@ -22,6 +22,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER NotActuallyPercent #define PRODUCT CANOE diff --git a/keyboards/percent/canoe/usbconfig.h b/keyboards/percent/canoe/usbconfig.h index f6c85cc69..85a915bb4 100644 --- a/keyboards/percent/canoe/usbconfig.h +++ b/keyboards/percent/canoe/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/percent/skog/config.h b/keyboards/percent/skog/config.h index ed7c558db..7c68d797d 100644 --- a/keyboards/percent/skog/config.h +++ b/keyboards/percent/skog/config.h @@ -20,6 +20,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER Percent #define PRODUCT Skog TKL diff --git a/keyboards/percent/skog/usbconfig.h b/keyboards/percent/skog/usbconfig.h index 3fb8e46ab..3a0628658 100644 --- a/keyboards/percent/skog/usbconfig.h +++ b/keyboards/percent/skog/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'P','e','r','c','e','n','t' diff --git a/keyboards/percent/skog_lite/config.h b/keyboards/percent/skog_lite/config.h index 836213911..97d11238e 100644 --- a/keyboards/percent/skog_lite/config.h +++ b/keyboards/percent/skog_lite/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER Percent #define PRODUCT Skog Lite diff --git a/keyboards/percent/skog_lite/usbconfig.h b/keyboards/percent/skog_lite/usbconfig.h index 782c2ff1a..e65d210ac 100644 --- a/keyboards/percent/skog_lite/usbconfig.h +++ b/keyboards/percent/skog_lite/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/plaid/usbconfig.h b/keyboards/plaid/usbconfig.h index c505c7f66..ba48a3264 100644 --- a/keyboards/plaid/usbconfig.h +++ b/keyboards/plaid/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x01 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'd','m','9','r','e','c','o','r','d','s' diff --git a/keyboards/singa/config.h b/keyboards/singa/config.h index dda54ccf4..badaef513 100644 --- a/keyboards/singa/config.h +++ b/keyboards/singa/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER Singa Keyboards #define PRODUCT Singa diff --git a/keyboards/singa/usbconfig.h b/keyboards/singa/usbconfig.h index 782c2ff1a..e65d210ac 100644 --- a/keyboards/singa/usbconfig.h +++ b/keyboards/singa/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/tgr/alice/config.h b/keyboards/tgr/alice/config.h index 2200fbbe4..4c36896b7 100644 --- a/keyboards/tgr/alice/config.h +++ b/keyboards/tgr/alice/config.h @@ -19,6 +19,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422E +#define DEVICE_VER 0x0200 // TODO: share these strings with usbconfig.h // Edit usbconfig.h to change these. #define MANUFACTURER TGR diff --git a/keyboards/tgr/alice/usbconfig.h b/keyboards/tgr/alice/usbconfig.h index 8d6cbe016..d2955d062 100644 --- a/keyboards/tgr/alice/usbconfig.h +++ b/keyboards/tgr/alice/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'T', 'G', 'R' diff --git a/keyboards/tgr/jane/config.h b/keyboards/tgr/jane/config.h index a5d63f621..dd119d3b0 100644 --- a/keyboards/tgr/jane/config.h +++ b/keyboards/tgr/jane/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER TGR #define PRODUCT Jane diff --git a/keyboards/tgr/jane/usbconfig.h b/keyboards/tgr/jane/usbconfig.h index 782c2ff1a..e65d210ac 100644 --- a/keyboards/tgr/jane/usbconfig.h +++ b/keyboards/tgr/jane/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/unikorn/config.h b/keyboards/unikorn/config.h index a871c0e27..1c4f3431a 100644 --- a/keyboards/unikorn/config.h +++ b/keyboards/unikorn/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER Singa and TGR #define PRODUCT Unikorn 60 diff --git a/keyboards/unikorn/usbconfig.h b/keyboards/unikorn/usbconfig.h index 29a3bd06e..3dcd1ccde 100644 --- a/keyboards/unikorn/usbconfig.h +++ b/keyboards/unikorn/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 's', 'i', 'n', 'g', 'a', 't', 'g', 'r' diff --git a/keyboards/winkeyless/bface/config.h b/keyboards/winkeyless/bface/config.h index 20f3642dc..9d90e16a3 100644 --- a/keyboards/winkeyless/bface/config.h +++ b/keyboards/winkeyless/bface/config.h @@ -20,6 +20,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 // You can edit those at usbconfig.h about line 250. These values will // unforunatly be ignored so far #define MANUFACTURER winkeyless.kr diff --git a/keyboards/winkeyless/bface/usbconfig.h b/keyboards/winkeyless/bface/usbconfig.h index 2109bb14d..5ff26399b 100644 --- a/keyboards/winkeyless/bface/usbconfig.h +++ b/keyboards/winkeyless/bface/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/winkeyless/bmini/config.h b/keyboards/winkeyless/bmini/config.h index 96acd9bf1..37df80f80 100644 --- a/keyboards/winkeyless/bmini/config.h +++ b/keyboards/winkeyless/bmini/config.h @@ -22,6 +22,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER winkeyless.kr #define PRODUCT B.mini diff --git a/keyboards/winkeyless/bmini/usbconfig.h b/keyboards/winkeyless/bmini/usbconfig.h index f6c85cc69..85a915bb4 100644 --- a/keyboards/winkeyless/bmini/usbconfig.h +++ b/keyboards/winkeyless/bmini/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/winkeyless/bminiex/config.h b/keyboards/winkeyless/bminiex/config.h index ebd33ad61..35c8ce933 100644 --- a/keyboards/winkeyless/bminiex/config.h +++ b/keyboards/winkeyless/bminiex/config.h @@ -21,6 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422E +#define DEVICE_VER 0x0200 #define MANUFACTURER winkeyless.kr #define PRODUCT B.mini Ex diff --git a/keyboards/winkeyless/bminiex/usbconfig.h b/keyboards/winkeyless/bminiex/usbconfig.h index f6c85cc69..85a915bb4 100644 --- a/keyboards/winkeyless/bminiex/usbconfig.h +++ b/keyboards/winkeyless/bminiex/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/keyboards/ymd75/config.h b/keyboards/ymd75/config.h index 6afd077b0..a56a1b54b 100644 --- a/keyboards/ymd75/config.h +++ b/keyboards/ymd75/config.h @@ -24,6 +24,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 // TODO: share these strings with usbconfig.h // Edit usbconfig.h to change these. diff --git a/keyboards/ymd75/usbconfig.h b/keyboards/ymd75/usbconfig.h index 271ab70dc..0e570b9ec 100644 --- a/keyboards/ymd75/usbconfig.h +++ b/keyboards/ymd75/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'Y', 'M', 'D', 'K' diff --git a/keyboards/ymd96/config.h b/keyboards/ymd96/config.h index 25cf19ac4..5c496d8d2 100644 --- a/keyboards/ymd96/config.h +++ b/keyboards/ymd96/config.h @@ -23,6 +23,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 // Edit usbconfig.h to change these. #define MANUFACTURER ymdkey #define PRODUCT ymd96 diff --git a/keyboards/ymd96/usbconfig.h b/keyboards/ymd96/usbconfig.h index a218829a6..83613384d 100644 --- a/keyboards/ymd96/usbconfig.h +++ b/keyboards/ymd96/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'y','m','d','k','e','y' diff --git a/keyboards/ymdk/bface/config.h b/keyboards/ymdk/bface/config.h index 8eaa1188e..9e5a9134f 100644 --- a/keyboards/ymdk/bface/config.h +++ b/keyboards/ymdk/bface/config.h @@ -19,6 +19,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 // You can edit those at usbconfig.h about line 250. These values will // unforunatly be ignored so far #define MANUFACTURER YMDK diff --git a/keyboards/ymdk/bface/usbconfig.h b/keyboards/ymdk/bface/usbconfig.h index 24191f5e3..7768c5cae 100644 --- a/keyboards/ymdk/bface/usbconfig.h +++ b/keyboards/ymdk/bface/usbconfig.h @@ -227,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'Y', 'M', 'D', 'K' diff --git a/keyboards/ymdk_np21/config.h b/keyboards/ymdk_np21/config.h index 30ba40081..4a846f5e9 100644 --- a/keyboards/ymdk_np21/config.h +++ b/keyboards/ymdk_np21/config.h @@ -22,6 +22,7 @@ along with this program. If not, see . #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 // TODO: share these strings with usbconfig.h // Edit usbconfig.h to change these. #define MANUFACTURER ymdk diff --git a/keyboards/ymdk_np21/usbconfig.h b/keyboards/ymdk_np21/usbconfig.h index d1fb1f517..4599c03dc 100644 --- a/keyboards/ymdk_np21/usbconfig.h +++ b/keyboards/ymdk_np21/usbconfig.h @@ -228,7 +228,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' diff --git a/quantum/template/ps2avrgb/usbconfig.h b/quantum/template/ps2avrgb/usbconfig.h index 75f318b99..83ad06544 100644 --- a/quantum/template/ps2avrgb/usbconfig.h +++ b/quantum/template/ps2avrgb/usbconfig.h @@ -217,7 +217,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -- cgit v1.2.3-70-g09d2