From a25dbaad327f834dad6fb572b074bab7be1e1d0f Mon Sep 17 00:00:00 2001
From: Andreas Lindhé <andreas@lindhe.io>
Date: Tue, 27 Jun 2017 14:58:38 +0200
Subject: Create sv_SE Qwerty layout for ErgoDox
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

*NOTE:* it might still be desirable to set the software layout to sv_SE in your
OS.

Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration

I have tried making this as close of a match I could between the [default
ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a
standard Swedish Qwerty layout.

Notable differences from default:
=================================

* There are three special character buttons (acute accent, circumflex/tilde and
  apostrophe/asterisk) that don't have any buttons to map to naturally. I've put
  these at other places:

    * Acute accent (´) can be found in the lower left corner, conveniently
      placed to reach for making an é.

    * Apostrophe (') was put in the lower left corner, close to acute accent.

    * Circumflex (^) and asterisk (*) was placed in the lower right corner.

    * Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left
      those out. I could only get the buttons to produce a single one of the
      characters. How can I get it to work properly?

* The Alt button on right thumb was exchanged for AltGr (RAlt).

* I changed the backslash in the numpad (layer 1) for a minus. Thought it was
  more sensible.

* I didn't find a good place for the "<>|" button, so that one was left out.
  That is a problem that really needs to be resolved. Pipe can be found on layer
  one, however.
---
 keyboards/ergodox/keymaps/swedish/keymap.c  | 247 ++++++++++++++++++++++++++++
 keyboards/ergodox/keymaps/swedish/readme.md |  36 ++++
 2 files changed, 283 insertions(+)
 create mode 100644 keyboards/ergodox/keymaps/swedish/keymap.c
 create mode 100644 keyboards/ergodox/keymaps/swedish/readme.md

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/swedish/keymap.c b/keyboards/ergodox/keymaps/swedish/keymap.c
new file mode 100644
index 000000000..c110538e6
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swedish/keymap.c
@@ -0,0 +1,247 @@
+/* Copyright 2017 Andreas Lindhé
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+#include "keymap_swedish.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   ½    |   !  |  "   |  #   |  #   |  %   | LEFT |           | RIGHT|   &  |  /   |  (   |  )   |  =   |  ?     |
+ * |   §    |   1  |  2 @ |  3 £ |  4 $ |  5   |      |           |      |   6  |  7 { |  8 [ |  9 ] |  0 } |  + \   |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Delete |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   Å    |
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Caps   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |Ö / L2|Ä / Cmd |
+ * | Lock   |      |      |      |      |      | Hyper|           | Meh  |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Left   |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ;  |   :  |_/Ctrl| RShift |
+ * | Shift  |      |      |      |      |      |      |           |      |      |      |   ,  |   .  |-     |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | '/L1 |  `   |AltShf| Left | Right|                                       |  Up  | Down |  ^   |  *   | ~L1  |
+ *   |      |  '   |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,---------------.
+ *                                        | App  | LGui |       | AltGr|Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Back- |------|       |------|  Tab   |Enter |
+ *                                 |      |space | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+    // left hand
+    NO_HALF,          KC_1,           KC_2,          KC_3,    KC_4,    KC_5,   KC_LEFT,
+    KC_DELT,          KC_Q,           KC_W,          KC_E,    KC_R,    KC_T,   TG(SYMB),
+    KC_BSPC,          KC_A,           KC_S,          KC_D,    KC_F,    KC_G,
+    KC_LSFT,          CTL_T(KC_Z),    KC_X,          KC_C,    KC_V,    KC_B,   ALL_T(KC_NO),
+    LT(SYMB,NO_APOS), NO_ACUT,        LALT(KC_LSFT), KC_LEFT, KC_RGHT,
+                                          ALT_T(KC_APP),  KC_LGUI,
+                                                          KC_HOME,
+                                           KC_SPC,KC_BSPC,KC_END,
+    // right hand
+         KC_RGHT,      KC_6,   KC_7,   KC_8,    KC_9,    KC_0,              NO_PLUS,
+         TG(SYMB),     KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,              NO_AA,
+                       KC_H,   KC_J,   KC_K,    KC_L,    LT(MDIA, NO_OSLH), GUI_T(NO_AE),
+         MEH_T(KC_NO), KC_N,   KC_M,   KC_COMM, KC_DOT,  CTL_T(NO_MINS),    KC_RSFT,
+                               KC_UP,  KC_DOWN, NO_CIRC, NO_ASTR,           KC_FN1,
+         NO_ALGR,        CTL_T(KC_ESC),
+         KC_PGUP,
+         KC_PGDN,KC_TAB, KC_ENT
+),
+
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Animat|      |       |Toggle|Solid |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |Bright|Bright|      |       |      |Hue-  |Hue+  |
+ *                                 |ness- |ness+ |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,NO_AT,  NO_LCBR,NO_RCBR,NO_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,NO_DLR, NO_LPRN,NO_RPRN,NO_GRV,
+       KC_TRNS,KC_PERC,NO_CIRC,NO_LBRC,NO_RBRC,NO_TILD,KC_TRNS,
+          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       RGB_MOD,KC_TRNS,
+                                               KC_TRNS,
+                               RGB_VAD,RGB_VAI,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    NO_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    NO_PLUS, KC_TRNS,
+       KC_TRNS, NO_AMPR, KC_1,   KC_2,    KC_3,    NO_MINS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    NO_EQL,  KC_TRNS,
+       RGB_TOG, RGB_SLD,
+       KC_TRNS,
+       KC_TRNS, RGB_HUD, RGB_HUI
+),
+
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
diff --git a/keyboards/ergodox/keymaps/swedish/readme.md b/keyboards/ergodox/keymaps/swedish/readme.md
new file mode 100644
index 000000000..b5b859bce
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swedish/readme.md
@@ -0,0 +1,36 @@
+# Swedish (sv_SE) Qwerty layout for ErgoDox EZ, based on the Default configuration
+
+*NOTE:* it might still be desirable to set the software layout to sv_SE in your
+OS.
+
+Remind me and I'll provide a picture of the layout.
+
+I have tried making this as close of a match I could between the [default
+ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a
+standard Swedish Qwerty layout.
+
+## Notable differences from default:
+
+* There are three special character buttons (acute accent, circumflex/tilde and
+  apostrophe/asterisk) that don't have any buttons to map to naturally. I've put
+  these at other places:
+
+    * Acute accent (´) can be found in the lower left corner, conveniently
+      placed to reach for making an é.
+
+    * Apostrophe (') was put in the lower left corner, close to acute accent.
+
+    * Circumflex (^) and asterisk (*) was placed in the lower right corner.
+
+    * Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left
+      those out. I could only get the buttons to produce a single one of the
+      characters. How can I get it to work properly?
+
+* The Alt button on right thumb was exchanged for AltGr (RAlt).
+
+* I changed the backslash in the numpad (layer 1) for a minus. Thought it was
+  more sensible.
+
+* I didn't find a good place for the "<>|" button, so that one was left out.
+  That is a problem that really needs to be resolved. Pipe can be found on layer
+  one, however.
-- 
cgit v1.2.3-70-g09d2


From ea7590c8940bc85f8a83bd42b1e01bc1431c104b Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Tue, 27 Jun 2017 14:35:08 -0400
Subject: add new arguements, docs

---
 docs/modding_your_keyboard.md | 2 +-
 keyboards/planck/config.h     | 1 +
 keyboards/preonic/config.h    | 1 +
 quantum/audio/audio.c         | 3 ++-
 4 files changed, 5 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/docs/modding_your_keyboard.md b/docs/modding_your_keyboard.md
index 2429570f5..44e6e6e72 100644
--- a/docs/modding_your_keyboard.md
+++ b/docs/modding_your_keyboard.md
@@ -1,7 +1,7 @@
 
 ## Audio output from a speaker
 
-Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any keyboard that allows access to the C6 port, you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
+Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any keyboard that allows access to the C6 or B5 port (`#define C6_AUDIO` and `#define B5_AUDIO`), you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
 
 The audio code lives in [quantum/audio/audio.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/audio.h) and in the other files in the audio directory. It's enabled by default on the Planck [stock keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/default/keymap.c). Here are the important bits:
 
diff --git a/keyboards/planck/config.h b/keyboards/planck/config.h
index 5cf96bb88..c86f8491e 100644
--- a/keyboards/planck/config.h
+++ b/keyboards/planck/config.h
@@ -37,6 +37,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define UNUSED_PINS
 
 #define AUDIO_VOICES
+#define C6_AUDIO
 
 #define BACKLIGHT_PIN B7
 
diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h
index 239c29ebf..8aa88b7f0 100644
--- a/keyboards/preonic/config.h
+++ b/keyboards/preonic/config.h
@@ -38,6 +38,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define UNUSED_PINS
 
 #define AUDIO_VOICES
+#define C6_AUDIO
 
 #define BACKLIGHT_PIN B7
 
diff --git a/quantum/audio/audio.c b/quantum/audio/audio.c
index 04f346003..3192d500f 100644
--- a/quantum/audio/audio.c
+++ b/quantum/audio/audio.c
@@ -271,12 +271,13 @@ float vibrato(float average_freq) {
 #ifdef C6_AUDIO
 ISR(TIMER3_COMPA_vect)
 {
-    float freq, freq_alt = 0;
+    float freq;
 
     if (playing_note) {
         if (voices > 0) {
 
             #ifdef B5_AUDIO
+            float freq_alt = 0;
                 if (voices > 1) {
                     if (polyphony_rate == 0) {
                         if (glissando) {
-- 
cgit v1.2.3-70-g09d2


From 7d28a417c035b66529d7f6d49479fe4c22737134 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Tue, 27 Jun 2017 15:28:13 -0400
Subject: don't let timer1 exist without b5 being enabled

---
 keyboards/atomic/keymaps/pvc/config.h | 2 ++
 quantum/audio/audio.c                 | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'keyboards')

diff --git a/keyboards/atomic/keymaps/pvc/config.h b/keyboards/atomic/keymaps/pvc/config.h
index 18a7253f2..ea5821ee7 100644
--- a/keyboards/atomic/keymaps/pvc/config.h
+++ b/keyboards/atomic/keymaps/pvc/config.h
@@ -49,6 +49,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
 
+#define C6_AUDIO
+
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
diff --git a/quantum/audio/audio.c b/quantum/audio/audio.c
index 3192d500f..c924f2bd5 100644
--- a/quantum/audio/audio.c
+++ b/quantum/audio/audio.c
@@ -442,6 +442,7 @@ ISR(TIMER3_COMPA_vect)
 }
 #endif
 
+#ifdef B5_AUDIO
 ISR(TIMER1_COMPA_vect)
 {
     #if defined(B5_AUDIO) && !defined(C6_AUDIO)
@@ -572,6 +573,7 @@ ISR(TIMER1_COMPA_vect)
     }
 #endif
 }
+#endif
 
 void play_note(float freq, int vol) {
 
-- 
cgit v1.2.3-70-g09d2


From f5f7dfa0647bac09c60cbf0247d46f3fedb43a9c Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Wed, 28 Jun 2017 00:26:05 -0400
Subject: cleanup lets_split

---
 keyboards/lets_split/config.h                     |   4 +-
 keyboards/lets_split/keymaps/OLED_sample/config.h |  27 ++-
 keyboards/lets_split/keymaps/adam/config.h        |  35 ++--
 keyboards/lets_split/keymaps/default/Makefile     |   3 +
 keyboards/lets_split/keymaps/default/config.h     |  17 ++
 keyboards/lets_split/keymaps/default/keymap.c     | 214 ++++++++++++++++++++++
 keyboards/lets_split/keymaps/hexwire/config.h     |  33 ++--
 keyboards/lets_split/keymaps/i2c/config.h         |  31 ----
 keyboards/lets_split/keymaps/i2c/keymap.c         | 214 ----------------------
 keyboards/lets_split/keymaps/khord/config.h       |  36 ++--
 keyboards/lets_split/keymaps/serial/config.h      |  34 ----
 keyboards/lets_split/keymaps/serial/keymap.c      | 214 ----------------------
 keyboards/lets_split/keymaps/smt/config.h         |  31 +---
 keyboards/lets_split/keymaps/xyverz/config.h      |  34 ++--
 keyboards/lets_split/lets_split.h                 |   3 -
 keyboards/lets_split/readme.md                    |  11 +-
 keyboards/lets_split/rev1/config.h                |   6 +-
 keyboards/lets_split/rev2/config.h                |   6 +-
 keyboards/orthodox/keymaps/default/Makefile       |   3 +
 keyboards/orthodox/keymaps/default/config.h       |  17 ++
 keyboards/orthodox/keymaps/default/keymap.c       | 132 +++++++++++++
 21 files changed, 464 insertions(+), 641 deletions(-)
 create mode 100644 keyboards/lets_split/keymaps/default/Makefile
 create mode 100644 keyboards/lets_split/keymaps/default/config.h
 create mode 100644 keyboards/lets_split/keymaps/default/keymap.c
 delete mode 100644 keyboards/lets_split/keymaps/i2c/config.h
 delete mode 100644 keyboards/lets_split/keymaps/i2c/keymap.c
 delete mode 100644 keyboards/lets_split/keymaps/serial/config.h
 delete mode 100644 keyboards/lets_split/keymaps/serial/keymap.c
 create mode 100644 keyboards/orthodox/keymaps/default/Makefile
 create mode 100644 keyboards/orthodox/keymaps/default/config.h
 create mode 100644 keyboards/orthodox/keymaps/default/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h
index 008fb0978..116a7f803 100644
--- a/keyboards/lets_split/config.h
+++ b/keyboards/lets_split/config.h
@@ -26,7 +26,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef SUBPROJECT_rev2
     #include "rev2/config.h"
 #endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
-#endif
+
 #endif
diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h
index 8389ba111..89ecc904b 100644
--- a/keyboards/lets_split/keymaps/OLED_sample/config.h
+++ b/keyboards/lets_split/keymaps/OLED_sample/config.h
@@ -1,23 +1,18 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
+#include "../../config.h"
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+/* Use I2C or Serial, not both */
 
 #define USE_I2C
 //#define USE_SERIAL
-//#define MASTER_RIGHT
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
 #define FLIP_HALF
 
 #define SSD1306OLED
@@ -40,3 +35,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17
+
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/adam/config.h b/keyboards/lets_split/keymaps/adam/config.h
index 177dd22d7..736e6efe3 100644
--- a/keyboards/lets_split/keymaps/adam/config.h
+++ b/keyboards/lets_split/keymaps/adam/config.h
@@ -1,43 +1,30 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+#include "../../config.h"
 
+/* Use I2C or Serial, not both */
 
 #define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
 
-//#define MASTER_LEFT
-// #define MASTER_RIGHT
+// #define MASTER_LEFT
+// #define _MASTER_RIGHT
 #define EE_HANDS
 
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
 #ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
     /* RGB Underglow */
     #undef RGBLED_NUM
     #define RGBLIGHT_ANIMATIONS
     #define RGBLED_NUM 8
 #endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
-#endif
 
 #undef TAPPING_TERM
 #define TAPPING_TERM 200 //At 500 some bad logic takes hold
 #define PREVENT_STUCK_MODIFIERS
 #define IGNORE_MOD_TAP_INTERRUPT
 #define PERMISSIVE_HOLD
+
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/default/Makefile b/keyboards/lets_split/keymaps/default/Makefile
new file mode 100644
index 000000000..457a3d01d
--- /dev/null
+++ b/keyboards/lets_split/keymaps/default/Makefile
@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/lets_split/keymaps/default/config.h b/keyboards/lets_split/keymaps/default/config.h
new file mode 100644
index 000000000..77ab02dee
--- /dev/null
+++ b/keyboards/lets_split/keymaps/default/config.h
@@ -0,0 +1,17 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/default/keymap.c b/keyboards/lets_split/keymaps/default/keymap.c
new file mode 100644
index 000000000..936312b2e
--- /dev/null
+++ b/keyboards/lets_split/keymaps/default/keymap.c
@@ -0,0 +1,214 @@
+#include "lets_split.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  KEYMAP( \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/hexwire/config.h b/keyboards/lets_split/keymaps/hexwire/config.h
index e315d8c0c..e29b40c98 100644
--- a/keyboards/lets_split/keymaps/hexwire/config.h
+++ b/keyboards/lets_split/keymaps/hexwire/config.h
@@ -1,35 +1,26 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
+#include "../../config.h"
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+/* Use I2C or Serial, not both */
 
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+#define USE_SERIAL
+// #define USE_I2C
 
+/* Select hand configuration */
 
-#define USE_SERIAL
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
 
 #define TAPPING_TERM 150
 
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
-#ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
-#endif
-
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 8
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h
deleted file mode 100644
index 013542731..000000000
--- a/keyboards/lets_split/keymaps/i2c/config.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#define USE_I2C
-
-#define MASTER_LEFT
-// #define _MASTER_RIGHT
-// #define EE_HANDS
-
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
-#ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
-#endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
-#endif
diff --git a/keyboards/lets_split/keymaps/i2c/keymap.c b/keyboards/lets_split/keymaps/i2c/keymap.c
deleted file mode 100644
index 936312b2e..000000000
--- a/keyboards/lets_split/keymaps/i2c/keymap.c
+++ /dev/null
@@ -1,214 +0,0 @@
-#include "lets_split.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_QWERTY] = KEYMAP( \
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Colemak
- * ,-----------------------------------------------------------------------------------.
- * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_COLEMAK] = KEYMAP( \
-  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
-  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Dvorak
- * ,-----------------------------------------------------------------------------------.
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_DVORAK] = KEYMAP( \
-  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
-  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
-  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = KEYMAP( \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_ADJUST] =  KEYMAP( \
-  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
-  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-)
-
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case DVORAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_DVORAK);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/khord/config.h b/keyboards/lets_split/keymaps/khord/config.h
index 2d845827b..e3bd2c72e 100644
--- a/keyboards/lets_split/keymaps/khord/config.h
+++ b/keyboards/lets_split/keymaps/khord/config.h
@@ -1,33 +1,21 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+#include "../../config.h"
 
 #define TAPPING_TERM 150
 
+/* Use I2C or Serial, not both */
+
 #define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+//#define MASTER_LEFT
+// #define _MASTER_RIGHT
 #define EE_HANDS
 
 #define RGBLIGHT_ANIMATIONS
 
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
-#ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
-#endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
-#endif
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h
deleted file mode 100644
index ba271d1ac..000000000
--- a/keyboards/lets_split/keymaps/serial/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-
-#define USE_SERIAL
-
-#define MASTER_LEFT
-// #define _MASTER_RIGHT
-// #define EE_HANDS
-
-
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
-#ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
-#endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
-#endif
diff --git a/keyboards/lets_split/keymaps/serial/keymap.c b/keyboards/lets_split/keymaps/serial/keymap.c
deleted file mode 100644
index 936312b2e..000000000
--- a/keyboards/lets_split/keymaps/serial/keymap.c
+++ /dev/null
@@ -1,214 +0,0 @@
-#include "lets_split.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_QWERTY] = KEYMAP( \
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Colemak
- * ,-----------------------------------------------------------------------------------.
- * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_COLEMAK] = KEYMAP( \
-  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
-  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Dvorak
- * ,-----------------------------------------------------------------------------------.
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_DVORAK] = KEYMAP( \
-  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
-  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
-  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = KEYMAP( \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_ADJUST] =  KEYMAP( \
-  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
-  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-)
-
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case DVORAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_DVORAK);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/smt/config.h b/keyboards/lets_split/keymaps/smt/config.h
index ba271d1ac..ddc98415d 100644
--- a/keyboards/lets_split/keymaps/smt/config.h
+++ b/keyboards/lets_split/keymaps/smt/config.h
@@ -1,34 +1,17 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+#include "../../config.h"
 
+/* Use I2C or Serial, not both */
 
 #define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
 
 #define MASTER_LEFT
 // #define _MASTER_RIGHT
 // #define EE_HANDS
 
-
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
-#ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
-#endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
 #endif
diff --git a/keyboards/lets_split/keymaps/xyverz/config.h b/keyboards/lets_split/keymaps/xyverz/config.h
index 1b5be030e..a03ea5084 100644
--- a/keyboards/lets_split/keymaps/xyverz/config.h
+++ b/keyboards/lets_split/keymaps/xyverz/config.h
@@ -1,37 +1,25 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+#include "../../config.h"
 
+/* Use I2C or Serial, not both */
 
 #define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
 
 #define MASTER_LEFT
-// #define MASTER_RIGHT
+// #define _MASTER_RIGHT
 // #define EE_HANDS
 
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
+
 #ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
     /* RGB Underglow */
     #undef RGBLED_NUM
     #define RGBLIGHT_ANIMATIONS
     #define RGBLED_NUM 8
 #endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
-#endif
+
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/lets_split.h b/keyboards/lets_split/lets_split.h
index 1892bf2cb..f7dc24a44 100644
--- a/keyboards/lets_split/lets_split.h
+++ b/keyboards/lets_split/lets_split.h
@@ -7,9 +7,6 @@
 #ifdef SUBPROJECT_rev2
     #include "rev2.h"
 #endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "rev2fliphalf.h"
-#endif
 
 // Used to create a keymap using only KC_ prefixed keys
 #define KC_KEYMAP( \
diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md
index d665d013e..610b776ee 100644
--- a/keyboards/lets_split/readme.md
+++ b/keyboards/lets_split/readme.md
@@ -19,14 +19,13 @@ There is additional information there about flashing and adding RGB underglow.
 Download or clone the whole firmware and navigate to the keyboards/lets_split directory. Once your dev env is setup, you'll be able to generate the default .hex using:
 
 ```
-$ make rev2
+$ make rev2-default
 ```
 
-You will see a lot of output and if everything worked correctly you will see the built hex files:
+You will see a lot of output and if everything worked correctly you will see the built hex file:
 
 ```
-lets_split_rev2_serial.hex
-lets_split_rev2_i2c.hex
+lets_split_rev2_default.hex
 ```
 
 If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so:
@@ -101,6 +100,8 @@ The pull-up resistors may be placed on either half. It is also possible
 to use 4 resistors and have the pull-ups in both halves, but this is
 unnecessary in simple use cases.
 
+You can change your configuration between serial and i2c by modifying your `config.h` file.
+
 Notes on Software Configuration
 -------------------------------
 
@@ -115,7 +116,7 @@ not be very difficult to adapt it to support more if required.
 Flashing
 -------
 From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
-Example: `make rev2-serial-avrdude`
+Example: `make rev2-default-avrdude`
 
 
 Choosing which board to plug the USB cable into (choosing Master)
diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h
index bc6872807..d1de65ed8 100644
--- a/keyboards/lets_split/rev1/config.h
+++ b/keyboards/lets_split/rev1/config.h
@@ -15,10 +15,10 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
 
-#include "config_common.h"
+#include "../config.h"
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h
index ca268cd6c..531f69cb1 100644
--- a/keyboards/lets_split/rev2/config.h
+++ b/keyboards/lets_split/rev2/config.h
@@ -15,10 +15,10 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#ifndef REV2_CONFIG_H
+#define REV2_CONFIG_H
 
-#include "config_common.h"
+#include "../config.h"
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
diff --git a/keyboards/orthodox/keymaps/default/Makefile b/keyboards/orthodox/keymaps/default/Makefile
new file mode 100644
index 000000000..457a3d01d
--- /dev/null
+++ b/keyboards/orthodox/keymaps/default/Makefile
@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/orthodox/keymaps/default/config.h b/keyboards/orthodox/keymaps/default/config.h
new file mode 100644
index 000000000..af3b9afb0
--- /dev/null
+++ b/keyboards/orthodox/keymaps/default/config.h
@@ -0,0 +1,17 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+// #define _MASTER_RIGHT
+#define EE_HANDS
+
+#endif
\ No newline at end of file
diff --git a/keyboards/orthodox/keymaps/default/keymap.c b/keyboards/orthodox/keymaps/default/keymap.c
new file mode 100644
index 000000000..ed24a3a1f
--- /dev/null
+++ b/keyboards/orthodox/keymaps/default/keymap.c
@@ -0,0 +1,132 @@
+#include "orthodox.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define LS__SPC MT(MOD_LSFT, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = KEYMAP( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                                                                   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_LEFT, XXXXXXX, KC_DOWN,          KC_UP,   XXXXXXX, KC_RIGHT,KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    LOWER,   KC_BSPC, KC_ENT,           KC_RALT, LS__SPC, RAISE,   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LGUI \
+),
+
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                                                KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCTL, XXXXXXX, _______,          _______, XXXXXXX, KC_RCTL, KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_HOME,    KC_COMM,    KC_DOT,  KC_END,  _______ \
+),
+
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                                                   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, XXXXXXX, _______,          _______, XXXXXXX, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_PGUP, KC_COMM, KC_DOT,  KC_PGDN, _______ \
+),
+
+[_ADJUST] =  KEYMAP( \
+  _______, RESET,   _______, _______, _______, _______,                                                                _______, _______, _______, _______, _______, KC_DEL,  \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, _______, XXXXXXX, _______,          _______, XXXXXXX, _______, AG_SWAP, QWERTY , COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
-- 
cgit v1.2.3-70-g09d2


From 663d3906ecbb008e852137fcfe4412b8b7f37702 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Wed, 28 Jun 2017 09:34:50 -0400
Subject: cleanup orthodox

---
 keyboards/orthodox/Makefile                |   2 +-
 keyboards/orthodox/config.h                |   7 +-
 keyboards/orthodox/keymaps/i2c/config.h    |  34 --------
 keyboards/orthodox/keymaps/i2c/keymap.c    | 132 -----------------------------
 keyboards/orthodox/keymaps/serial/config.h |  34 --------
 keyboards/orthodox/keymaps/serial/keymap.c | 132 -----------------------------
 keyboards/orthodox/readme.md               |   6 +-
 keyboards/orthodox/rev1/config.h           |   6 +-
 8 files changed, 8 insertions(+), 345 deletions(-)
 delete mode 100644 keyboards/orthodox/keymaps/i2c/config.h
 delete mode 100644 keyboards/orthodox/keymaps/i2c/keymap.c
 delete mode 100644 keyboards/orthodox/keymaps/serial/config.h
 delete mode 100644 keyboards/orthodox/keymaps/serial/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/orthodox/Makefile b/keyboards/orthodox/Makefile
index f5c87d4d6..0c519b323 100644
--- a/keyboards/orthodox/Makefile
+++ b/keyboards/orthodox/Makefile
@@ -1,4 +1,4 @@
-SUBPROJECT_DEFAULT = rev2
+SUBPROJECT_DEFAULT = rev1
 
 ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
diff --git a/keyboards/orthodox/config.h b/keyboards/orthodox/config.h
index 008fb0978..3390f48ae 100644
--- a/keyboards/orthodox/config.h
+++ b/keyboards/orthodox/config.h
@@ -23,10 +23,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef SUBPROJECT_rev1
     #include "rev1/config.h"
 #endif
-#ifdef SUBPROJECT_rev2
-    #include "rev2/config.h"
-#endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
-#endif
+
 #endif
diff --git a/keyboards/orthodox/keymaps/i2c/config.h b/keyboards/orthodox/keymaps/i2c/config.h
deleted file mode 100644
index 542529719..000000000
--- a/keyboards/orthodox/keymaps/i2c/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-
-#define USE_I2C
-
-//#define MASTER_LEFT
-//#define _MASTER_RIGHT
-#define EE_HANDS
-
-
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
-#ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
-#endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
-#endif
diff --git a/keyboards/orthodox/keymaps/i2c/keymap.c b/keyboards/orthodox/keymaps/i2c/keymap.c
deleted file mode 100644
index ed24a3a1f..000000000
--- a/keyboards/orthodox/keymaps/i2c/keymap.c
+++ /dev/null
@@ -1,132 +0,0 @@
-#include "orthodox.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-#define LS__SPC MT(MOD_LSFT, KC_SPC)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_QWERTY] = KEYMAP( \
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                                                                   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_LEFT, XXXXXXX, KC_DOWN,          KC_UP,   XXXXXXX, KC_RIGHT,KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    LOWER,   KC_BSPC, KC_ENT,           KC_RALT, LS__SPC, RAISE,   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LGUI \
-),
-
-[_LOWER] = KEYMAP( \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                                                KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCTL, XXXXXXX, _______,          _______, XXXXXXX, KC_RCTL, KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_HOME,    KC_COMM,    KC_DOT,  KC_END,  _______ \
-),
-
-[_RAISE] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                                                   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, XXXXXXX, _______,          _______, XXXXXXX, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_PGUP, KC_COMM, KC_DOT,  KC_PGDN, _______ \
-),
-
-[_ADJUST] =  KEYMAP( \
-  _______, RESET,   _______, _______, _______, _______,                                                                _______, _______, _______, _______, _______, KC_DEL,  \
-  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, _______, XXXXXXX, _______,          _______, XXXXXXX, _______, AG_SWAP, QWERTY , COLEMAK, DVORAK,  _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
-)
-
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case DVORAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_DVORAK);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
diff --git a/keyboards/orthodox/keymaps/serial/config.h b/keyboards/orthodox/keymaps/serial/config.h
deleted file mode 100644
index 5169452ba..000000000
--- a/keyboards/orthodox/keymaps/serial/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-
-#define USE_SERIAL
-
-//#define MASTER_LEFT
-//#define _MASTER_RIGHT
-#define EE_HANDS
-
-
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
-#ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
-#endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
-#endif
diff --git a/keyboards/orthodox/keymaps/serial/keymap.c b/keyboards/orthodox/keymaps/serial/keymap.c
deleted file mode 100644
index ed24a3a1f..000000000
--- a/keyboards/orthodox/keymaps/serial/keymap.c
+++ /dev/null
@@ -1,132 +0,0 @@
-#include "orthodox.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-#define LS__SPC MT(MOD_LSFT, KC_SPC)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-[_QWERTY] = KEYMAP( \
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                                                                   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_LEFT, XXXXXXX, KC_DOWN,          KC_UP,   XXXXXXX, KC_RIGHT,KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    LOWER,   KC_BSPC, KC_ENT,           KC_RALT, LS__SPC, RAISE,   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LGUI \
-),
-
-[_LOWER] = KEYMAP( \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                                                KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LCTL, XXXXXXX, _______,          _______, XXXXXXX, KC_RCTL, KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_HOME,    KC_COMM,    KC_DOT,  KC_END,  _______ \
-),
-
-[_RAISE] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                                                   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, XXXXXXX, _______,          _______, XXXXXXX, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______,          _______, _______, _______, KC_F12,  KC_PGUP, KC_COMM, KC_DOT,  KC_PGDN, _______ \
-),
-
-[_ADJUST] =  KEYMAP( \
-  _______, RESET,   _______, _______, _______, _______,                                                                _______, _______, _______, _______, _______, KC_DEL,  \
-  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, _______, XXXXXXX, _______,          _______, XXXXXXX, _______, AG_SWAP, QWERTY , COLEMAK, DVORAK,  _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
-)
-
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case DVORAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_DVORAK);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
diff --git a/keyboards/orthodox/readme.md b/keyboards/orthodox/readme.md
index 94bb8ebb9..57e940b0f 100644
--- a/keyboards/orthodox/readme.md
+++ b/keyboards/orthodox/readme.md
@@ -37,13 +37,13 @@ For further reading on build- and flashing-procedures for split ortholinear skel
 Download or clone the whole firmware and navigate to the keyboards/orthodox directory. Once your dev env is setup, you'll be able to generate the default .hex using:
 
 ```
-$ make rev1
+$ make rev1-default
 ```
 
 You will see a lot of output and if everything worked correctly you will see the built hex files in your *root qmk_firmware directory* two levels up:
 
 ```
-orthodox_rev1_serial.hex
+orthodox_rev1_default.hex
 ```
 
 If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so:
@@ -97,7 +97,7 @@ the two halves, i.e. if your split keyboard has 3 rows in each half, then
 Flashing
 -------
 From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
-Example: `make rev2-serial-avrdude`
+Example: `make rev2-default-avrdude`
 
 
 Choosing which board to plug the USB cable into (choosing Master)
diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h
index 46bb99440..1c603145c 100644
--- a/keyboards/orthodox/rev1/config.h
+++ b/keyboards/orthodox/rev1/config.h
@@ -15,10 +15,10 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
 
-#include "config_common.h"
+#include "../config.h"
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-- 
cgit v1.2.3-70-g09d2


From 56634ca0657f557d84a8d3275e80c9ec03c5c9b6 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Wed, 28 Jun 2017 10:38:18 -0400
Subject: cleanup nyquist

---
 keyboards/nyquist/keymaps/default/Makefile |   3 +
 keyboards/nyquist/keymaps/default/config.h |  34 +++++
 keyboards/nyquist/keymaps/default/keymap.c | 232 +++++++++++++++++++++++++++++
 keyboards/nyquist/keymaps/hexwire/config.h |  20 ++-
 keyboards/nyquist/keymaps/i2c/config.h     |  26 ----
 keyboards/nyquist/keymaps/i2c/keymap.c     | 231 ----------------------------
 keyboards/nyquist/keymaps/serial/config.h  |  26 ----
 keyboards/nyquist/keymaps/serial/keymap.c  | 232 -----------------------------
 keyboards/nyquist/rev1/config.h            |   6 +-
 9 files changed, 288 insertions(+), 522 deletions(-)
 create mode 100644 keyboards/nyquist/keymaps/default/Makefile
 create mode 100644 keyboards/nyquist/keymaps/default/config.h
 create mode 100644 keyboards/nyquist/keymaps/default/keymap.c
 delete mode 100644 keyboards/nyquist/keymaps/i2c/config.h
 delete mode 100644 keyboards/nyquist/keymaps/i2c/keymap.c
 delete mode 100644 keyboards/nyquist/keymaps/serial/config.h
 delete mode 100644 keyboards/nyquist/keymaps/serial/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/nyquist/keymaps/default/Makefile b/keyboards/nyquist/keymaps/default/Makefile
new file mode 100644
index 000000000..457a3d01d
--- /dev/null
+++ b/keyboards/nyquist/keymaps/default/Makefile
@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/nyquist/keymaps/default/config.h b/keyboards/nyquist/keymaps/default/config.h
new file mode 100644
index 000000000..624d284ca
--- /dev/null
+++ b/keyboards/nyquist/keymaps/default/config.h
@@ -0,0 +1,34 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#endif
\ No newline at end of file
diff --git a/keyboards/nyquist/keymaps/default/keymap.c b/keyboards/nyquist/keymaps/default/keymap.c
new file mode 100644
index 000000000..dcb68a6e0
--- /dev/null
+++ b/keyboards/nyquist/keymaps/default/keymap.c
@@ -0,0 +1,232 @@
+#include "nyquist.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL, \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL, \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  KEYMAP( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/nyquist/keymaps/hexwire/config.h b/keyboards/nyquist/keymaps/hexwire/config.h
index 9da7ff6b6..23abba0aa 100644
--- a/keyboards/nyquist/keymaps/hexwire/config.h
+++ b/keyboards/nyquist/keymaps/hexwire/config.h
@@ -15,13 +15,23 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
 #define USE_SERIAL
+// #define USE_I2C
 
-#define TAPPING_TERM 150
+/* Select hand configuration */
 
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#define TAPPING_TERM 150
 
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
@@ -29,3 +39,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+
+#endif
\ No newline at end of file
diff --git a/keyboards/nyquist/keymaps/i2c/config.h b/keyboards/nyquist/keymaps/i2c/config.h
deleted file mode 100644
index dc279f6e6..000000000
--- a/keyboards/nyquist/keymaps/i2c/config.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
-Copyright 2017 Danny Nguyen <danny@hexwire.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#define USE_I2C
-
-#define MASTER_LEFT
-// #define _MASTER_RIGHT
-// #define EE_HANDS
-
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
diff --git a/keyboards/nyquist/keymaps/i2c/keymap.c b/keyboards/nyquist/keymaps/i2c/keymap.c
deleted file mode 100644
index aa4b6800c..000000000
--- a/keyboards/nyquist/keymaps/i2c/keymap.c
+++ /dev/null
@@ -1,231 +0,0 @@
-#include "nyquist.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_QWERTY] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL, \
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Colemak
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_COLEMAK] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL, \
-  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Dvorak
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_DVORAK] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL, \
-  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
-  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = KEYMAP( \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_ADJUST] =  KEYMAP( \
-  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
-  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-)
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case DVORAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_DVORAK);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
\ No newline at end of file
diff --git a/keyboards/nyquist/keymaps/serial/config.h b/keyboards/nyquist/keymaps/serial/config.h
deleted file mode 100644
index ff79b6fb9..000000000
--- a/keyboards/nyquist/keymaps/serial/config.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
-Copyright 2017 Danny Nguyen <danny@hexwire.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#define USE_SERIAL
-
-#define MASTER_LEFT
-// #define _MASTER_RIGHT
-// #define EE_HANDS
-
-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
diff --git a/keyboards/nyquist/keymaps/serial/keymap.c b/keyboards/nyquist/keymaps/serial/keymap.c
deleted file mode 100644
index dcb68a6e0..000000000
--- a/keyboards/nyquist/keymaps/serial/keymap.c
+++ /dev/null
@@ -1,232 +0,0 @@
-#include "nyquist.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_QWERTY] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL, \
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Colemak
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_COLEMAK] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL, \
-  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Dvorak
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
- * `-----------------------------------------------------------------------------------'
- */
-[_DVORAK] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL, \
-  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
-  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
-),
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = KEYMAP( \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = KEYMAP( \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_ADJUST] =  KEYMAP( \
-  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
-  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-)
-
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case DVORAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
-        #endif
-        persistent_default_layer_set(1UL<<_DVORAK);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
\ No newline at end of file
diff --git a/keyboards/nyquist/rev1/config.h b/keyboards/nyquist/rev1/config.h
index c2907cf5d..af4f7dbb1 100644
--- a/keyboards/nyquist/rev1/config.h
+++ b/keyboards/nyquist/rev1/config.h
@@ -15,10 +15,10 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
 
-#include "config_common.h"
+#include "../config.h"
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xCEEB
-- 
cgit v1.2.3-70-g09d2


From 61ef949576fb64e3c57c3381875708893e4b3f96 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Wed, 28 Jun 2017 12:58:58 -0400
Subject: update some copyright headers

---
 keyboards/lets_split/config.h                     |  1 +
 keyboards/lets_split/keymaps/OLED_sample/config.h | 20 ++++++++++++++++++++
 keyboards/lets_split/keymaps/adam/config.h        | 20 ++++++++++++++++++++
 keyboards/lets_split/keymaps/default/config.h     | 20 ++++++++++++++++++++
 keyboards/lets_split/keymaps/khord/config.h       | 20 ++++++++++++++++++++
 keyboards/lets_split/keymaps/smt/config.h         | 20 ++++++++++++++++++++
 keyboards/lets_split/keymaps/xyverz/config.h      | 20 ++++++++++++++++++++
 keyboards/lets_split/rev1/config.h                |  1 +
 keyboards/lets_split/rev2/config.h                |  1 +
 keyboards/orthodox/config.h                       |  4 ++++
 keyboards/orthodox/keymaps/default/config.h       | 21 +++++++++++++++++++++
 keyboards/orthodox/keymaps/default/keymap.c       | 21 +++++++++++++++++++++
 keyboards/orthodox/orthodox.h                     |  6 ------
 keyboards/orthodox/rev1/config.h                  |  4 ++++
 keyboards/orthodox/rev1/rev1.c                    | 21 +++++++++++++++++++++
 keyboards/orthodox/rev1/rev1.h                    | 21 +++++++++++++++++++++
 16 files changed, 215 insertions(+), 6 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h
index 116a7f803..591c656a2 100644
--- a/keyboards/lets_split/config.h
+++ b/keyboards/lets_split/config.h
@@ -1,5 +1,6 @@
 /*
 Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h
index 89ecc904b..c7cbc9372 100644
--- a/keyboards/lets_split/keymaps/OLED_sample/config.h
+++ b/keyboards/lets_split/keymaps/OLED_sample/config.h
@@ -1,3 +1,23 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
diff --git a/keyboards/lets_split/keymaps/adam/config.h b/keyboards/lets_split/keymaps/adam/config.h
index 736e6efe3..7496876b5 100644
--- a/keyboards/lets_split/keymaps/adam/config.h
+++ b/keyboards/lets_split/keymaps/adam/config.h
@@ -1,3 +1,23 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
diff --git a/keyboards/lets_split/keymaps/default/config.h b/keyboards/lets_split/keymaps/default/config.h
index 77ab02dee..7f33a4363 100644
--- a/keyboards/lets_split/keymaps/default/config.h
+++ b/keyboards/lets_split/keymaps/default/config.h
@@ -1,3 +1,23 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
diff --git a/keyboards/lets_split/keymaps/khord/config.h b/keyboards/lets_split/keymaps/khord/config.h
index e3bd2c72e..ea10960dd 100644
--- a/keyboards/lets_split/keymaps/khord/config.h
+++ b/keyboards/lets_split/keymaps/khord/config.h
@@ -1,3 +1,23 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
diff --git a/keyboards/lets_split/keymaps/smt/config.h b/keyboards/lets_split/keymaps/smt/config.h
index ddc98415d..3274fcca6 100644
--- a/keyboards/lets_split/keymaps/smt/config.h
+++ b/keyboards/lets_split/keymaps/smt/config.h
@@ -1,3 +1,23 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
diff --git a/keyboards/lets_split/keymaps/xyverz/config.h b/keyboards/lets_split/keymaps/xyverz/config.h
index a03ea5084..a21ca3699 100644
--- a/keyboards/lets_split/keymaps/xyverz/config.h
+++ b/keyboards/lets_split/keymaps/xyverz/config.h
@@ -1,3 +1,23 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h
index d1de65ed8..800d9a7e7 100644
--- a/keyboards/lets_split/rev1/config.h
+++ b/keyboards/lets_split/rev1/config.h
@@ -1,5 +1,6 @@
 /*
 Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h
index 531f69cb1..d0619c248 100644
--- a/keyboards/lets_split/rev2/config.h
+++ b/keyboards/lets_split/rev2/config.h
@@ -1,5 +1,6 @@
 /*
 Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
diff --git a/keyboards/orthodox/config.h b/keyboards/orthodox/config.h
index 3390f48ae..b1a5b9cf9 100644
--- a/keyboards/orthodox/config.h
+++ b/keyboards/orthodox/config.h
@@ -1,5 +1,9 @@
 /*
+This is the c configuration file for the keyboard
+
 Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2017 Jack Humbert
+Copyright 2017 Art Ortenburger
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
diff --git a/keyboards/orthodox/keymaps/default/config.h b/keyboards/orthodox/keymaps/default/config.h
index af3b9afb0..f24c6db29 100644
--- a/keyboards/orthodox/keymaps/default/config.h
+++ b/keyboards/orthodox/keymaps/default/config.h
@@ -1,3 +1,24 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2017 Art Ortenburger
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
diff --git a/keyboards/orthodox/keymaps/default/keymap.c b/keyboards/orthodox/keymaps/default/keymap.c
index ed24a3a1f..c837ae54d 100644
--- a/keyboards/orthodox/keymaps/default/keymap.c
+++ b/keyboards/orthodox/keymaps/default/keymap.c
@@ -1,3 +1,24 @@
+/*
+This is the keymap for the keyboard
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2017 Art Ortenburger
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #include "orthodox.h"
 #include "action_layer.h"
 #include "eeconfig.h"
diff --git a/keyboards/orthodox/orthodox.h b/keyboards/orthodox/orthodox.h
index bb7efb6ad..b33356e5e 100644
--- a/keyboards/orthodox/orthodox.h
+++ b/keyboards/orthodox/orthodox.h
@@ -4,12 +4,6 @@
 #ifdef SUBPROJECT_rev1
     #include "rev1.h"
 #endif
-#ifdef SUBPROJECT_rev2
-    #include "rev2.h"
-#endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "rev2fliphalf.h"
-#endif
 
 // Used to create a keymap using only KC_ prefixed keys
 #define KC_KEYMAP( \
diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h
index 1c603145c..05f043b4c 100644
--- a/keyboards/orthodox/rev1/config.h
+++ b/keyboards/orthodox/rev1/config.h
@@ -1,5 +1,9 @@
 /*
+This is the c configuration file for the subproject
+
 Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2017 Art Ortenburger
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
diff --git a/keyboards/orthodox/rev1/rev1.c b/keyboards/orthodox/rev1/rev1.c
index 10ece03f0..f404017b7 100644
--- a/keyboards/orthodox/rev1/rev1.c
+++ b/keyboards/orthodox/rev1/rev1.c
@@ -1,3 +1,24 @@
+/*
+This is the source file for the subproject
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2017 Art Ortenburger
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #include "orthodox.h"
 
 #ifdef AUDIO_ENABLE
diff --git a/keyboards/orthodox/rev1/rev1.h b/keyboards/orthodox/rev1/rev1.h
index 4f163299d..06282b234 100644
--- a/keyboards/orthodox/rev1/rev1.h
+++ b/keyboards/orthodox/rev1/rev1.h
@@ -1,3 +1,24 @@
+/*
+This is the header file for the subproject
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2017 Art Ortenburger
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
 #ifndef REV1_H
 #define REV1_H
 
-- 
cgit v1.2.3-70-g09d2


From b476d65b9cc2b25031c6f8143fd6a59a7d5ee6b7 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Fri, 30 Jun 2017 16:09:52 -0400
Subject: Update keyboards' rules.mk/Makefiles (#1442)

this may change some of the keyboards' default settings - if you experience anything odd, please check back to this commit
---
 keyboards/alps64/rules.mk                          |  16 ++++-----
 keyboards/amj60/rules.mk                           |  24 ++++++-------
 keyboards/amjpad/rules.mk                          |  24 ++++++-------
 keyboards/atomic/rules.mk                          |  26 +++++++-------
 keyboards/atreus/rules.mk                          |  22 ++++++------
 keyboards/atreus62/rules.mk                        |  22 ++++++------
 keyboards/bantam44/rules.mk                        |  22 ++++++------
 keyboards/chibios_test/rules.mk                    |  14 ++++----
 keyboards/clueboard/rules.mk                       |  22 ++++++------
 keyboards/cluecard/rules.mk                        |  26 +++++++-------
 keyboards/cluepad/rules.mk                         |  22 ++++++------
 .../ibm_terminal/keymaps/default/Makefile          |  32 ++++++++---------
 .../ibm_terminal/keymaps/priyadi/Makefile          |  32 ++++++++---------
 keyboards/converter/ibm_terminal/rules.mk          |  32 ++++++++---------
 keyboards/dk60/rules.mk                            |  28 +++++++--------
 keyboards/ergodox/ez/Makefile                      |   4 +--
 keyboards/ergodox/ez/rules.mk                      |   4 +--
 keyboards/ergodox/infinity/rules.mk                |  10 +++---
 keyboards/ergodox/keymaps/algernon/Makefile        |   6 ++--
 .../ergodox/keymaps/dvorak_programmer/Makefile     |   2 +-
 .../ergodox/keymaps/erez_experimental/Makefile     |   2 --
 keyboards/ergodox/keymaps/jack/Makefile            |   3 --
 keyboards/ergodox/keymaps/jafo/jafo-layout.pdf     | Bin 185426 -> 185412 bytes
 keyboards/ergodox/rules.mk                         |  20 +++++------
 keyboards/frosty_flake/rules.mk                    |  26 +++++++-------
 keyboards/gh60/keymaps/dbroqua/Makefile            |  26 +++++++-------
 keyboards/gh60/keymaps/dbroqua_7U/Makefile         |  26 +++++++-------
 keyboards/gh60/keymaps/robotmaxtron/Makefile       |  26 +++++++-------
 keyboards/gh60/keymaps/unxmaal/Makefile            |  26 +++++++-------
 keyboards/gh60/rules.mk                            |  24 ++++++-------
 keyboards/gherkin/rules.mk                         |  20 +++++------
 keyboards/gonnerd/rules.mk                         |  24 ++++++-------
 keyboards/handwired/CMD60/rules.mk                 |  24 ++++++-------
 keyboards/handwired/MS_sculpt_mobile/rules.mk      |  26 +++++++-------
 keyboards/handwired/arrow_pad/rules.mk             |  26 +++++++-------
 keyboards/handwired/atreus50/rules.mk              |  26 +++++++-------
 keyboards/handwired/fivethirteen/rules.mk          |  24 ++++++-------
 keyboards/handwired/frenchdev/rules.mk             |  30 ++++++++--------
 keyboards/handwired/gamenum/rules.mk               |  24 ++++++-------
 keyboards/handwired/kbod/rules.mk                  |  26 +++++++-------
 keyboards/handwired/magicforce68/rules.mk          |  24 ++++++-------
 keyboards/handwired/minorca/rules.mk               |  26 +++++++-------
 keyboards/handwired/numpad20/rules.mk              |  24 ++++++-------
 keyboards/handwired/onekey/rules.mk                |  10 +++---
 keyboards/handwired/ortho5x13/rules.mk             |  24 ++++++-------
 keyboards/handwired/pilcrow/rules.mk               |  24 ++++++-------
 keyboards/handwired/promethium/rules.mk            |  38 ++++++++++-----------
 keyboards/handwired/reddot/rules.mk                |  22 ++++++------
 keyboards/handwired/retro_refit/rules.mk           |  24 ++++++-------
 keyboards/handwired/trackpoint/rules.mk            |  28 +++++++--------
 keyboards/handwired/traveller/rules.mk             |  22 ++++++------
 keyboards/hhkb/rules.mk                            |  24 ++++++-------
 keyboards/infinity60/rules.mk                      |  16 ++++-----
 keyboards/jd40/rules.mk                            |  26 +++++++-------
 keyboards/jd45/rules.mk                            |  22 ++++++------
 keyboards/kbd75/rules.mk                           |  20 +++++------
 keyboards/kc60/keymaps/stanleylai/Makefile         |  28 +++++++--------
 keyboards/kc60/keymaps/wigguno/Makefile            |  26 +++++++-------
 keyboards/kc60/keymaps/ws2812/Makefile             |  28 +++++++--------
 keyboards/kc60/rules.mk                            |  26 +++++++-------
 keyboards/kinesis/rules.mk                         |  20 +++++------
 keyboards/kitten_paw/rules.mk                      |  24 ++++++-------
 keyboards/kmac/rules.mk                            |  28 +++++++--------
 keyboards/lets_split/rules.mk                      |  30 ++++++++--------
 keyboards/m10a/rules.mk                            |  26 +++++++-------
 keyboards/maxipad/rules.mk                         |  38 ++++++++++-----------
 keyboards/mitosis/rules.mk                         |  24 ++++++-------
 keyboards/miuni32/rules.mk                         |  24 ++++++-------
 keyboards/nyquist/rules.mk                         |  30 ++++++++--------
 keyboards/orthodox/rules.mk                        |  30 ++++++++--------
 keyboards/pegasushoof/keymaps/blowrak/Makefile     |  26 +++++++-------
 keyboards/pegasushoof/keymaps/default/Makefile     |  26 +++++++-------
 keyboards/pegasushoof/rules.mk                     |  26 +++++++-------
 keyboards/phantom/rules.mk                         |  28 +++++++--------
 .../planck/keymaps/handwired_binaryplease/Makefile |  26 +++++++-------
 keyboards/planck/rev3/rules.mk                     |   2 +-
 keyboards/planck/rev4/rules.mk                     |   2 +-
 keyboards/planck/rules.mk                          |  26 +++++++-------
 keyboards/preonic/rules.mk                         |  28 +++++++--------
 keyboards/roadkit/rules.mk                         |  24 ++++++-------
 keyboards/s60_x/default/rules.mk                   |  10 +++---
 keyboards/s60_x/rgb/rules.mk                       |  10 +++---
 keyboards/s60_x/rules.mk                           |  16 ++++-----
 keyboards/s65_x/rules.mk                           |  22 ++++++------
 keyboards/satan/keymaps/denolfe/Makefile           |  24 ++++++-------
 keyboards/satan/rules.mk                           |  24 ++++++-------
 keyboards/sixkeyboard/rules.mk                     |  24 ++++++-------
 keyboards/tada68/rules.mk                          |  24 ++++++-------
 keyboards/tiger_lily/rules.mk                      |  26 +++++++-------
 keyboards/tv44/rules.mk                            |  24 ++++++-------
 keyboards/vision_division/rules.mk                 |  24 ++++++-------
 keyboards/whitefox/rules.mk                        |  20 +++++------
 92 files changed, 1016 insertions(+), 1021 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/alps64/rules.mk b/keyboards/alps64/rules.mk
index c326d3e26..621dc5a95 100644
--- a/keyboards/alps64/rules.mk
+++ b/keyboards/alps64/rules.mk
@@ -55,12 +55,12 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 
 # Build Options
-#   comment out to disable the options.
+#   change to no to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
\ No newline at end of file
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no	# USB Nkey Rollover - not yet supported in LUFA
diff --git a/keyboards/amj60/rules.mk b/keyboards/amj60/rules.mk
index 18403ac32..a1b4f8a61 100644
--- a/keyboards/amj60/rules.mk
+++ b/keyboards/amj60/rules.mk
@@ -52,15 +52,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= yes # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE  ?= yes # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE      ?= no  # MIDI controls
-AUDIO_ENABLE     ?= no
-UNICODE_ENABLE   ?= no  # Unicode
-BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = yes # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE  = yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/amjpad/rules.mk b/keyboards/amjpad/rules.mk
index d8ec42365..dd5b2bbe0 100644
--- a/keyboards/amjpad/rules.mk
+++ b/keyboards/amjpad/rules.mk
@@ -52,15 +52,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/atomic/rules.mk b/keyboards/atomic/rules.mk
index d0f3a3a1c..0bedc6f5c 100644
--- a/keyboards/atomic/rules.mk
+++ b/keyboards/atomic/rules.mk
@@ -52,18 +52,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
\ No newline at end of file
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
\ No newline at end of file
diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk
index 3a00993bd..12d3ca6c5 100644
--- a/keyboards/atreus/rules.mk
+++ b/keyboards/atreus/rules.mk
@@ -64,19 +64,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   comment out to disable the options.
 #
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES 		# MIDI controls
-UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
 
-USB ?= /dev/cu.usbmodem1411
+USB = /dev/cu.usbmodem1411
 
 upload: build
 	$(ATREUS_UPLOAD_COMMAND)
diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk
index f5d0be23a..ca399e9c5 100644
--- a/keyboards/atreus62/rules.mk
+++ b/keyboards/atreus62/rules.mk
@@ -51,16 +51,16 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-#BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
-#MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= yes         # Unicode
-#BLUETOOTH_ENABLE ?= yes       # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+#BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+#MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = yes         # Unicode
+#BLUETOOTH_ENABLE = yes       # Enable Bluetooth with the Adafruit EZ-Key HID
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk
index baa0e9e7a..f245a3ba1 100644
--- a/keyboards/bantam44/rules.mk
+++ b/keyboards/bantam44/rules.mk
@@ -53,15 +53,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/chibios_test/rules.mk b/keyboards/chibios_test/rules.mk
index 4b5a84535..f72e1ab69 100644
--- a/keyboards/chibios_test/rules.mk
+++ b/keyboards/chibios_test/rules.mk
@@ -1,8 +1,8 @@
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE ?= yes	# Mouse keys
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control
-CONSOLE_ENABLE ?= yes	# Console for debug
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes	    # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
\ No newline at end of file
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file
\ No newline at end of file
diff --git a/keyboards/clueboard/rules.mk b/keyboards/clueboard/rules.mk
index 7ce096ba8..f852a0184 100644
--- a/keyboards/clueboard/rules.mk
+++ b/keyboards/clueboard/rules.mk
@@ -90,14 +90,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no 	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= no 	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes   # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes  # Enable keyboard underlight functionality
-MIDI_ENABLE ?= no 		# MIDI controls
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no 	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = no 	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes  # Enable keyboard underlight functionality
+MIDI_ENABLE = no 		# MIDI controls
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/cluecard/rules.mk b/keyboards/cluecard/rules.mk
index 454235877..2117c8127 100644
--- a/keyboards/cluecard/rules.mk
+++ b/keyboards/cluecard/rules.mk
@@ -53,18 +53,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-RGBLIGHT_ENABLE ?= yes       # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes       # Enable keyboard backlight functionality by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= yes           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+RGBLIGHT_ENABLE = yes       # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = yes           # Audio output on port C6
diff --git a/keyboards/cluepad/rules.mk b/keyboards/cluepad/rules.mk
index 19b16b95a..264aba044 100644
--- a/keyboards/cluepad/rules.mk
+++ b/keyboards/cluepad/rules.mk
@@ -52,14 +52,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-# MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-# EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-# COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable numpad's backlight functionality
-RGBLIGHT_ENABLE ?= yes
-# MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+# EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes	# Console for debug(+400)
+# COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable numpad's backlight functionality
+RGBLIGHT_ENABLE = yes
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file
diff --git a/keyboards/converter/ibm_terminal/keymaps/default/Makefile b/keyboards/converter/ibm_terminal/keymaps/default/Makefile
index 9ec246494..db293d6fd 100644
--- a/keyboards/converter/ibm_terminal/keymaps/default/Makefile
+++ b/keyboards/converter/ibm_terminal/keymaps/default/Makefile
@@ -2,24 +2,24 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-UNICODEMAP_ENABLE ?= yes
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-PS2_USE_USART ?= yes
-API_SYSEX_ENABLE ?= no
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_USE_USART = yes
+API_SYSEX_ENABLE = no
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 ifndef QUANTUM_DIR
 	include ../../../../../Makefile
diff --git a/keyboards/converter/ibm_terminal/keymaps/priyadi/Makefile b/keyboards/converter/ibm_terminal/keymaps/priyadi/Makefile
index 9ec246494..db293d6fd 100644
--- a/keyboards/converter/ibm_terminal/keymaps/priyadi/Makefile
+++ b/keyboards/converter/ibm_terminal/keymaps/priyadi/Makefile
@@ -2,24 +2,24 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-UNICODEMAP_ENABLE ?= yes
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-PS2_USE_USART ?= yes
-API_SYSEX_ENABLE ?= no
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_USE_USART = yes
+API_SYSEX_ENABLE = no
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 ifndef QUANTUM_DIR
 	include ../../../../../Makefile
diff --git a/keyboards/converter/ibm_terminal/rules.mk b/keyboards/converter/ibm_terminal/rules.mk
index 944d1bcec..9401cf199 100644
--- a/keyboards/converter/ibm_terminal/rules.mk
+++ b/keyboards/converter/ibm_terminal/rules.mk
@@ -49,24 +49,24 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-UNICODEMAP_ENABLE ?= yes
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-PS2_USE_USART ?= yes
-API_SYSEX_ENABLE ?= n
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_USE_USART = yes
+API_SYSEX_ENABLE = n
 CUSTOM_MATRIX = yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 SRC = matrix.c led.c
\ No newline at end of file
diff --git a/keyboards/dk60/rules.mk b/keyboards/dk60/rules.mk
index 36c6bed17..c85ed9b0a 100644
--- a/keyboards/dk60/rules.mk
+++ b/keyboards/dk60/rules.mk
@@ -5,17 +5,17 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-# COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= no  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= yes 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-SLEEP_LED_ENABLE ?= yes
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes	# Console for debug(+400)
+# COMMAND_ENABLE = yes    # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = yes 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+SLEEP_LED_ENABLE = yes
diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile
index 1098332b8..663e09b7b 100644
--- a/keyboards/ergodox/ez/Makefile
+++ b/keyboards/ergodox/ez/Makefile
@@ -1,7 +1,7 @@
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 COMMAND_ENABLE   = no  # Commands for debug and configuration
-RGBLIGHT_ENABLE ?= yes
-MIDI_ENABLE ?= no
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no
 
 ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk
index 6cd1c0c4f..e9bfb1399 100644
--- a/keyboards/ergodox/ez/rules.mk
+++ b/keyboards/ergodox/ez/rules.mk
@@ -72,5 +72,5 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 #
 
 SLEEP_LED_ENABLE = no
-API_SYSEX_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes
+API_SYSEX_ENABLE = no
+RGBLIGHT_ENABLE = yes
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
index af29ebce8..bbb0f6efe 100644
--- a/keyboards/ergodox/infinity/rules.mk
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -58,12 +58,12 @@ OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
 # Build Options
 #   comment out to disable the options.
 #
-CUSTOM_MATRIX ?= yes # Custom matrix file
+CUSTOM_MATRIX = yes # Custom matrix file
 SERIAL_LINK_ENABLE = yes
-VISUALIZER_ENABLE ?= yes
-LCD_ENABLE ?= yes
-BACKLIGHT_ENABLE ?= yes
-LCD_BACKLIGHT_ENABLE ?= yes
+VISUALIZER_ENABLE = yes
+LCD_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+LCD_BACKLIGHT_ENABLE = yes
 MIDI_ENABLE = no
 RGBLIGHT_ENABLE = no
 
diff --git a/keyboards/ergodox/keymaps/algernon/Makefile b/keyboards/ergodox/keymaps/algernon/Makefile
index 699add3dd..23d3bb723 100644
--- a/keyboards/ergodox/keymaps/algernon/Makefile
+++ b/keyboards/ergodox/keymaps/algernon/Makefile
@@ -1,15 +1,15 @@
 BOOTMAGIC_ENABLE=no
 COMMAND_ENABLE=no
 SLEEP_LED_ENABLE=no
-FORCE_NKRO ?= yes
+FORCE_NKRO = yes
 DEBUG_ENABLE = no
 CONSOLE_ENABLE = no
 TAP_DANCE_ENABLE = yes
-KEYLOGGER_ENABLE ?= yes
+KEYLOGGER_ENABLE = yes
 UCIS_ENABLE = yes
 MOUSEKEY_ENABLE = no
 
-AUTOLOG_ENABLE ?= no
+AUTOLOG_ENABLE = no
 
 ifeq (${FORCE_NKRO},yes)
 OPT_DEFS += -DFORCE_NKRO
diff --git a/keyboards/ergodox/keymaps/dvorak_programmer/Makefile b/keyboards/ergodox/keymaps/dvorak_programmer/Makefile
index 91b1ae597..44d702209 100644
--- a/keyboards/ergodox/keymaps/dvorak_programmer/Makefile
+++ b/keyboards/ergodox/keymaps/dvorak_programmer/Makefile
@@ -1,7 +1,7 @@
 BOOTMAGIC_ENABLE=no
 COMMAND_ENABLE=no
 SLEEP_LED_ENABLE=no
-FORCE_NKRO ?= yes
+FORCE_NKRO = yes
 DEBUG_ENABLE = no
 CONSOLE_ENABLE = no
 TAP_DANCE_ENABLE = no
diff --git a/keyboards/ergodox/keymaps/erez_experimental/Makefile b/keyboards/ergodox/keymaps/erez_experimental/Makefile
index 51a0c74c5..b673c5ce5 100644
--- a/keyboards/ergodox/keymaps/erez_experimental/Makefile
+++ b/keyboards/ergodox/keymaps/erez_experimental/Makefile
@@ -3,8 +3,6 @@
 
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 COMMAND_ENABLE   = no  # Commands for debug and configuration
-RGBLIGHT_ENABLE ?= yes
-MIDI_ENABLE ?= yes
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/ergodox/keymaps/jack/Makefile b/keyboards/ergodox/keymaps/jack/Makefile
index 3ca69bb92..457a3d01d 100644
--- a/keyboards/ergodox/keymaps/jack/Makefile
+++ b/keyboards/ergodox/keymaps/jack/Makefile
@@ -1,6 +1,3 @@
-RGBLIGHT_ENABLE ?= yes
-MIDI_ENABLE ?= yes
-
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif
diff --git a/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf b/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf
index 189b49b12..760a0eccf 100644
Binary files a/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf and b/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf differ
diff --git a/keyboards/ergodox/rules.mk b/keyboards/ergodox/rules.mk
index 2e501e81b..5939d634c 100644
--- a/keyboards/ergodox/rules.mk
+++ b/keyboards/ergodox/rules.mk
@@ -16,13 +16,13 @@
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= no  # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-CUSTOM_MATRIX    ?= yes # Custom matrix file for the ErgoDox EZ
-SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-UNICODE_ENABLE   ?= yes # Unicode
-ONEHAND_ENABLE   ?= yes # Allow swapping hands of keyboard
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+UNICODE_ENABLE   = yes # Unicode
+ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard
diff --git a/keyboards/frosty_flake/rules.mk b/keyboards/frosty_flake/rules.mk
index f878533fe..f9c43d3ed 100644
--- a/keyboards/frosty_flake/rules.mk
+++ b/keyboards/frosty_flake/rules.mk
@@ -51,21 +51,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
 CUSTOM_MATRIX = yes
 SRC += matrix.c
\ No newline at end of file
diff --git a/keyboards/gh60/keymaps/dbroqua/Makefile b/keyboards/gh60/keymaps/dbroqua/Makefile
index f1644a8e4..31c63ffd8 100644
--- a/keyboards/gh60/keymaps/dbroqua/Makefile
+++ b/keyboards/gh60/keymaps/dbroqua/Makefile
@@ -91,20 +91,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= yes	    # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes    # Enable RGB Underglow
+SLEEP_LED_ENABLE = yes	    # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes    # Enable RGB Underglow
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/gh60/keymaps/dbroqua_7U/Makefile b/keyboards/gh60/keymaps/dbroqua_7U/Makefile
index da0f07d7d..e54601969 100644
--- a/keyboards/gh60/keymaps/dbroqua_7U/Makefile
+++ b/keyboards/gh60/keymaps/dbroqua_7U/Makefile
@@ -91,20 +91,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= yes	    # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no    # Enable RGB Underglow
+SLEEP_LED_ENABLE = yes	    # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no    # Enable RGB Underglow
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/gh60/keymaps/robotmaxtron/Makefile b/keyboards/gh60/keymaps/robotmaxtron/Makefile
index c73cf1141..2b80ea00e 100644
--- a/keyboards/gh60/keymaps/robotmaxtron/Makefile
+++ b/keyboards/gh60/keymaps/robotmaxtron/Makefile
@@ -91,20 +91,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes          # Enable RGB Underglow
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/gh60/keymaps/unxmaal/Makefile b/keyboards/gh60/keymaps/unxmaal/Makefile
index c73cf1141..2b80ea00e 100644
--- a/keyboards/gh60/keymaps/unxmaal/Makefile
+++ b/keyboards/gh60/keymaps/unxmaal/Makefile
@@ -91,20 +91,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes          # Enable RGB Underglow
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/gh60/rules.mk b/keyboards/gh60/rules.mk
index aba680e45..00f4b660a 100644
--- a/keyboards/gh60/rules.mk
+++ b/keyboards/gh60/rules.mk
@@ -51,16 +51,16 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES			# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES			# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/gherkin/rules.mk b/keyboards/gherkin/rules.mk
index 0e7a40727..6bb9edb35 100644
--- a/keyboards/gherkin/rules.mk
+++ b/keyboards/gherkin/rules.mk
@@ -44,13 +44,13 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no	# Console for debug(+400)
-COMMAND_ENABLE ?= no    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= no
\ No newline at end of file
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
\ No newline at end of file
diff --git a/keyboards/gonnerd/rules.mk b/keyboards/gonnerd/rules.mk
index c9b584d54..ebea1005b 100644
--- a/keyboards/gonnerd/rules.mk
+++ b/keyboards/gonnerd/rules.mk
@@ -50,17 +50,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
                              # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
                              # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
diff --git a/keyboards/handwired/CMD60/rules.mk b/keyboards/handwired/CMD60/rules.mk
index 711759917..f50987cde 100644
--- a/keyboards/handwired/CMD60/rules.mk
+++ b/keyboards/handwired/CMD60/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/handwired/MS_sculpt_mobile/rules.mk b/keyboards/handwired/MS_sculpt_mobile/rules.mk
index 680389c84..5b8902031 100644
--- a/keyboards/handwired/MS_sculpt_mobile/rules.mk
+++ b/keyboards/handwired/MS_sculpt_mobile/rules.mk
@@ -24,23 +24,23 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 
-USB ?= /dev/cu.usbmodem14141
+USB = /dev/cu.usbmodem14141
 
  
 
diff --git a/keyboards/handwired/arrow_pad/rules.mk b/keyboards/handwired/arrow_pad/rules.mk
index 3dca9b6ea..a03f0836b 100644
--- a/keyboards/handwired/arrow_pad/rules.mk
+++ b/keyboards/handwired/arrow_pad/rules.mk
@@ -53,18 +53,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
\ No newline at end of file
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
\ No newline at end of file
diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk
index 7770ea2a2..5e808dfa7 100644
--- a/keyboards/handwired/atreus50/rules.mk
+++ b/keyboards/handwired/atreus50/rules.mk
@@ -52,21 +52,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 avrdude: build
 	ls /dev/tty* > /tmp/1; \
diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk
index 711759917..f50987cde 100644
--- a/keyboards/handwired/fivethirteen/rules.mk
+++ b/keyboards/handwired/fivethirteen/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/handwired/frenchdev/rules.mk b/keyboards/handwired/frenchdev/rules.mk
index 16203a5f5..2b70ae564 100644
--- a/keyboards/handwired/frenchdev/rules.mk
+++ b/keyboards/handwired/frenchdev/rules.mk
@@ -70,22 +70,22 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= yes  # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-CUSTOM_MATRIX    ?= yes # Custom matrix file (taken and adapted from the ErgoDox EZ to handle custom number of columns)
-SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-UNICODE_ENABLE   ?= yes # Unicode
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = yes  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+CUSTOM_MATRIX    = yes # Custom matrix file (taken and adapted from the ErgoDox EZ to handle custom number of columns)
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+UNICODE_ENABLE   = yes # Unicode
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 RGBLIGHT_ENABLE = no
-API_SYSEX_ENABLE ?= no
+API_SYSEX_ENABLE = no
 
 #ifndef QUANTUM_DIR
 #	include ../../../Makefile
diff --git a/keyboards/handwired/gamenum/rules.mk b/keyboards/handwired/gamenum/rules.mk
index afb9372e1..e8b0c6048 100644
--- a/keyboards/handwired/gamenum/rules.mk
+++ b/keyboards/handwired/gamenum/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../Makefile
diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk
index 4fcd147a9..b97cacd5c 100644
--- a/keyboards/handwired/kbod/rules.mk
+++ b/keyboards/handwired/kbod/rules.mk
@@ -51,18 +51,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk
index e897ef252..0e07bde40 100644
--- a/keyboards/handwired/magicforce68/rules.mk
+++ b/keyboards/handwired/magicforce68/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk
index c51371a78..ce502b820 100644
--- a/keyboards/handwired/minorca/rules.mk
+++ b/keyboards/handwired/minorca/rules.mk
@@ -50,18 +50,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
\ No newline at end of file
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
\ No newline at end of file
diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk
index e897ef252..0e07bde40 100644
--- a/keyboards/handwired/numpad20/rules.mk
+++ b/keyboards/handwired/numpad20/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/handwired/onekey/rules.mk b/keyboards/handwired/onekey/rules.mk
index c6d10856a..e5a953362 100644
--- a/keyboards/handwired/onekey/rules.mk
+++ b/keyboards/handwired/onekey/rules.mk
@@ -52,11 +52,11 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 #NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
 
diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk
index e897ef252..0e07bde40 100644
--- a/keyboards/handwired/ortho5x13/rules.mk
+++ b/keyboards/handwired/ortho5x13/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk
index 55898147d..67badc820 100644
--- a/keyboards/handwired/pilcrow/rules.mk
+++ b/keyboards/handwired/pilcrow/rules.mk
@@ -51,17 +51,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk
index a6dd43b85..6fa45b42b 100644
--- a/keyboards/handwired/promethium/rules.mk
+++ b/keyboards/handwired/promethium/rules.mk
@@ -50,27 +50,27 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-UNICODEMAP_ENABLE ?= yes
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-PS2_MOUSE_ENABLE ?= yes
-PS2_USE_INT ?= yes
-API_SYSEX_ENABLE ?= no
-CUSTOM_MATRIX ?= yes
-BLUETOOTH ?= AdafruitBLE
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_MOUSE_ENABLE = yes
+PS2_USE_INT = yes
+API_SYSEX_ENABLE = no
+CUSTOM_MATRIX = yes
+BLUETOOTH = AdafruitBLE
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 SRC += $(QUANTUM_DIR)/light_ws2812.c
 SRC += rgbsps.c
diff --git a/keyboards/handwired/reddot/rules.mk b/keyboards/handwired/reddot/rules.mk
index 9a4409fe6..b00ee9e0e 100755
--- a/keyboards/handwired/reddot/rules.mk
+++ b/keyboards/handwired/reddot/rules.mk
@@ -16,7 +16,7 @@ MCU = atmega32u4
 F_CPU = 16000000
 
 # for avr upload
-USB ?= /dev/cu.usbmodem1421
+USB = /dev/cu.usbmodem1421
 #
 # LUFA specific
 #
@@ -64,20 +64,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/handwired/retro_refit/rules.mk b/keyboards/handwired/retro_refit/rules.mk
index 10fbfa5c9..98aa19e6b 100644
--- a/keyboards/handwired/retro_refit/rules.mk
+++ b/keyboards/handwired/retro_refit/rules.mk
@@ -53,16 +53,16 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+CONSOLE_ENABLE = yes		# Console for debug(+400)
+COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES			# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES			# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/handwired/trackpoint/rules.mk b/keyboards/handwired/trackpoint/rules.mk
index 0609dd304..aaf630f10 100644
--- a/keyboards/handwired/trackpoint/rules.mk
+++ b/keyboards/handwired/trackpoint/rules.mk
@@ -4,21 +4,21 @@ ARCH = AVR8
 F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 OPT_DEFS += -DBOOTLOADER_SIZE=512
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
-PS2_MOUSE_ENABLE ?= yes
-PS2_USE_USART ?= yes
+PS2_MOUSE_ENABLE = yes
+PS2_USE_USART = yes
 
 ifndef QUANTUM_DIR
 	include ../../Makefile
diff --git a/keyboards/handwired/traveller/rules.mk b/keyboards/handwired/traveller/rules.mk
index 12a4b71f4..a7f7fc230 100644
--- a/keyboards/handwired/traveller/rules.mk
+++ b/keyboards/handwired/traveller/rules.mk
@@ -16,7 +16,7 @@ MCU = atmega32u4
 F_CPU = 16000000
 
 # for avr upload
-USB ?= /dev/cu.usbmodem1421
+USB = /dev/cu.usbmodem1421
 #
 # LUFA specific
 #
@@ -64,20 +64,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 RGBLIGHT_ENABLE = yes
 
 ifndef QUANTUM_DIR
diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk
index e4190039f..d31e755ef 100644
--- a/keyboards/hhkb/rules.mk
+++ b/keyboards/hhkb/rules.mk
@@ -58,19 +58,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes  # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes   # Console for debug(+400)
-COMMAND_ENABLE ?= yes   # Commands for debug and configuration
-CUSTOM_MATRIX ?= yes    # Custom matrix file for the HHKB
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes  # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
+CONSOLE_ENABLE = yes   # Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+CUSTOM_MATRIX = yes    # Custom matrix file for the HHKB
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= yes       # MIDI controls
-# UNICODE_ENABLE ?= yes    # Unicode
-# BLUETOOTH_ENABLE ?= yes  # Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = yes       # MIDI controls
+# UNICODE_ENABLE = yes    # Unicode
+# BLUETOOTH_ENABLE = yes  # Enable Bluetooth with the Adafruit EZ-Key HID
 
 debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
 debug-on: all
diff --git a/keyboards/infinity60/rules.mk b/keyboards/infinity60/rules.mk
index c19f62401..a3ddd55c6 100644
--- a/keyboards/infinity60/rules.mk
+++ b/keyboards/infinity60/rules.mk
@@ -56,12 +56,12 @@ OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control
-CONSOLE_ENABLE ?= yes	# Console for debug
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes	    # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file
diff --git a/keyboards/jd40/rules.mk b/keyboards/jd40/rules.mk
index 2f18fdf10..2bce6d2a2 100644
--- a/keyboards/jd40/rules.mk
+++ b/keyboards/jd40/rules.mk
@@ -53,17 +53,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES			# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
\ No newline at end of file
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES			# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes          # Enable RGB Underglow
\ No newline at end of file
diff --git a/keyboards/jd45/rules.mk b/keyboards/jd45/rules.mk
index 2f1e266a1..fe8354e95 100644
--- a/keyboards/jd45/rules.mk
+++ b/keyboards/jd45/rules.mk
@@ -53,15 +53,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file
diff --git a/keyboards/kbd75/rules.mk b/keyboards/kbd75/rules.mk
index c303af4bc..9c4082da2 100644
--- a/keyboards/kbd75/rules.mk
+++ b/keyboards/kbd75/rules.mk
@@ -44,13 +44,13 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no	# Console for debug(+400)
-COMMAND_ENABLE ?= no    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes
\ No newline at end of file
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/kc60/keymaps/stanleylai/Makefile b/keyboards/kc60/keymaps/stanleylai/Makefile
index b8b2beda4..9a381d2e7 100644
--- a/keyboards/kc60/keymaps/stanleylai/Makefile
+++ b/keyboards/kc60/keymaps/stanleylai/Makefile
@@ -3,22 +3,22 @@
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE ?= yes 			 # Enable WS2812 underglow RGB strip
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes 			 # Enable WS2812 underglow RGB strip
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/kc60/keymaps/wigguno/Makefile b/keyboards/kc60/keymaps/wigguno/Makefile
index 0d7d918d8..1f8d1506f 100644
--- a/keyboards/kc60/keymaps/wigguno/Makefile
+++ b/keyboards/kc60/keymaps/wigguno/Makefile
@@ -3,21 +3,21 @@
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/kc60/keymaps/ws2812/Makefile b/keyboards/kc60/keymaps/ws2812/Makefile
index 891c44416..a8c93bcf5 100644
--- a/keyboards/kc60/keymaps/ws2812/Makefile
+++ b/keyboards/kc60/keymaps/ws2812/Makefile
@@ -3,22 +3,22 @@
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE ?= yes 			 # Enable WS2812 underglow RGB strip
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes 			 # Enable WS2812 underglow RGB strip
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
+NKRO_ENABLE = no            # USB Nkey Rollover
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk
index 06bd5dc92..d5b94fb83 100644
--- a/keyboards/kc60/rules.mk
+++ b/keyboards/kc60/rules.mk
@@ -51,18 +51,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
diff --git a/keyboards/kinesis/rules.mk b/keyboards/kinesis/rules.mk
index 956a64bdd..a7ff8da8b 100644
--- a/keyboards/kinesis/rules.mk
+++ b/keyboards/kinesis/rules.mk
@@ -56,18 +56,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=2048
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming
 CUSTOM_MATRIX=yes # need to do our own thing with the matrix
diff --git a/keyboards/kitten_paw/rules.mk b/keyboards/kitten_paw/rules.mk
index b0c909d11..fe7b6d376 100644
--- a/keyboards/kitten_paw/rules.mk
+++ b/keyboards/kitten_paw/rules.mk
@@ -53,20 +53,20 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 
 CUSTOM_MATRIX = yes
 SRC += matrix.c
diff --git a/keyboards/kmac/rules.mk b/keyboards/kmac/rules.mk
index 2305de412..41b16979d 100644
--- a/keyboards/kmac/rules.mk
+++ b/keyboards/kmac/rules.mk
@@ -54,19 +54,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-CUSTOM_MATRIX ?= yes         # Custom matrix file
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+CUSTOM_MATRIX = yes         # Custom matrix file
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk
index 43eff99e7..cc87ee31c 100644
--- a/keyboards/lets_split/rules.mk
+++ b/keyboards/lets_split/rules.mk
@@ -56,22 +56,22 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SUBPROJECT_rev1 ?= yes
-USE_I2C ?= yes
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SUBPROJECT_rev1 = yes
+USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 CUSTOM_MATRIX = yes
 
diff --git a/keyboards/m10a/rules.mk b/keyboards/m10a/rules.mk
index f5a785dbc..0a00c7ccb 100644
--- a/keyboards/m10a/rules.mk
+++ b/keyboards/m10a/rules.mk
@@ -50,19 +50,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
-NKRO_ENABLE ?= yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= yes         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 API_SYSEX_ENABLE = yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk
index a5c739152..31be1924f 100644
--- a/keyboards/maxipad/rules.mk
+++ b/keyboards/maxipad/rules.mk
@@ -53,24 +53,24 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-USE_PRO_MICRO ?= yes
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+USE_PRO_MICRO = yes
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
diff --git a/keyboards/mitosis/rules.mk b/keyboards/mitosis/rules.mk
index 4e4eba82b..04fa552f8 100644
--- a/keyboards/mitosis/rules.mk
+++ b/keyboards/mitosis/rules.mk
@@ -62,20 +62,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   comment out to disable the options.
 #
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes   # Commands for debug and configuration
-CUSTOM_MATRIX ?= yes    # Remote matrix from the wireless bridge
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+CUSTOM_MATRIX = yes    # Remote matrix from the wireless bridge
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES 		# MIDI controls
-UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
 
-USB ?= /dev/ttyACM0
+USB = /dev/ttyACM0
 
 upload: build
 	$(MITOSIS_UPLOAD_COMMAND)
diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk
index ef8daf3ca..1092e50d8 100644
--- a/keyboards/miuni32/rules.mk
+++ b/keyboards/miuni32/rules.mk
@@ -51,17 +51,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
diff --git a/keyboards/nyquist/rules.mk b/keyboards/nyquist/rules.mk
index 0efa78550..dfcff1d90 100644
--- a/keyboards/nyquist/rules.mk
+++ b/keyboards/nyquist/rules.mk
@@ -55,22 +55,22 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SUBPROJECT_rev1 ?= yes
-USE_I2C ?= yes
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SUBPROJECT_rev1 = yes
+USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 CUSTOM_MATRIX = yes
 
diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk
index 0efa78550..dfcff1d90 100644
--- a/keyboards/orthodox/rules.mk
+++ b/keyboards/orthodox/rules.mk
@@ -55,22 +55,22 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SUBPROJECT_rev1 ?= yes
-USE_I2C ?= yes
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SUBPROJECT_rev1 = yes
+USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 CUSTOM_MATRIX = yes
 
diff --git a/keyboards/pegasushoof/keymaps/blowrak/Makefile b/keyboards/pegasushoof/keymaps/blowrak/Makefile
index fec0d2d97..168fb625b 100644
--- a/keyboards/pegasushoof/keymaps/blowrak/Makefile
+++ b/keyboards/pegasushoof/keymaps/blowrak/Makefile
@@ -2,19 +2,19 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-CUSTOM_MATRIX ?= yes         # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+CUSTOM_MATRIX = yes         # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 
 ifndef QUANTUM_DIR
diff --git a/keyboards/pegasushoof/keymaps/default/Makefile b/keyboards/pegasushoof/keymaps/default/Makefile
index fec0d2d97..168fb625b 100644
--- a/keyboards/pegasushoof/keymaps/default/Makefile
+++ b/keyboards/pegasushoof/keymaps/default/Makefile
@@ -2,19 +2,19 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-CUSTOM_MATRIX ?= yes         # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+CUSTOM_MATRIX = yes         # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 
 ifndef QUANTUM_DIR
diff --git a/keyboards/pegasushoof/rules.mk b/keyboards/pegasushoof/rules.mk
index b3eeebfdb..c5a35428c 100644
--- a/keyboards/pegasushoof/rules.mk
+++ b/keyboards/pegasushoof/rules.mk
@@ -49,19 +49,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 
-CUSTOM_MATRIX ?= yes
+CUSTOM_MATRIX = yes
 SRC = matrix.c
diff --git a/keyboards/phantom/rules.mk b/keyboards/phantom/rules.mk
index c07593961..af0025b3c 100644
--- a/keyboards/phantom/rules.mk
+++ b/keyboards/phantom/rules.mk
@@ -51,19 +51,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
diff --git a/keyboards/planck/keymaps/handwired_binaryplease/Makefile b/keyboards/planck/keymaps/handwired_binaryplease/Makefile
index 538b1c26c..248fe2bb7 100644
--- a/keyboards/planck/keymaps/handwired_binaryplease/Makefile
+++ b/keyboards/planck/keymaps/handwired_binaryplease/Makefile
@@ -56,19 +56,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= yes            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 API_SYSEX_ENABLE = no
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk
index 3ed1445e4..559409682 100644
--- a/keyboards/planck/rev3/rules.mk
+++ b/keyboards/planck/rev3/rules.mk
@@ -1,4 +1,4 @@
-AUDIO_ENABLE ?= no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk
index ed09f85a4..01d848e98 100644
--- a/keyboards/planck/rev4/rules.mk
+++ b/keyboards/planck/rev4/rules.mk
@@ -1,4 +1,4 @@
-AUDIO_ENABLE ?= yes           # Audio output on port C6
+AUDIO_ENABLE = yes           # Audio output on port C6
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk
index 6776062f6..5580bb387 100644
--- a/keyboards/planck/rules.mk
+++ b/keyboards/planck/rules.mk
@@ -50,19 +50,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= yes            # MIDI controls
-AUDIO_ENABLE ?= yes           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 API_SYSEX_ENABLE = no
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk
index 6be5b55bc..b46c20193 100644
--- a/keyboards/preonic/rules.mk
+++ b/keyboards/preonic/rules.mk
@@ -52,19 +52,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= yes            # MIDI controls
-AUDIO_ENABLE ?= yes           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.
-API_SYSEX_ENABLE ?= no
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
\ No newline at end of file
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
\ No newline at end of file
diff --git a/keyboards/roadkit/rules.mk b/keyboards/roadkit/rules.mk
index dbba6bace..786c9dc3e 100644
--- a/keyboards/roadkit/rules.mk
+++ b/keyboards/roadkit/rules.mk
@@ -53,17 +53,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
diff --git a/keyboards/s60_x/default/rules.mk b/keyboards/s60_x/default/rules.mk
index aaa3764df..f0f0ad76b 100644
--- a/keyboards/s60_x/default/rules.mk
+++ b/keyboards/s60_x/default/rules.mk
@@ -1,8 +1,8 @@
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
-NKRO_ENABLE ?= no          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes     # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE ?= no
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes     # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/s60_x/rgb/rules.mk b/keyboards/s60_x/rgb/rules.mk
index 6953cc6d6..a979632a9 100644
--- a/keyboards/s60_x/rgb/rules.mk
+++ b/keyboards/s60_x/rgb/rules.mk
@@ -1,8 +1,8 @@
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
-NKRO_ENABLE ?= yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes     # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE ?= yes      # Enable RGB light
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes     # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes      # Enable RGB light
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile
diff --git a/keyboards/s60_x/rules.mk b/keyboards/s60_x/rules.mk
index 0c568efe9..5d4b28195 100644
--- a/keyboards/s60_x/rules.mk
+++ b/keyboards/s60_x/rules.mk
@@ -53,13 +53,13 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
\ No newline at end of file
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
\ No newline at end of file
diff --git a/keyboards/s65_x/rules.mk b/keyboards/s65_x/rules.mk
index 9d8b559af..26a0a44b6 100644
--- a/keyboards/s65_x/rules.mk
+++ b/keyboards/s65_x/rules.mk
@@ -53,15 +53,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-NKRO_ENABLE ?= yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes     # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE ?= yes      # Enable RGB light
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+NKRO_ENABLE = yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes     # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes      # Enable RGB light
diff --git a/keyboards/satan/keymaps/denolfe/Makefile b/keyboards/satan/keymaps/denolfe/Makefile
index c4adab737..04d274306 100644
--- a/keyboards/satan/keymaps/denolfe/Makefile
+++ b/keyboards/satan/keymaps/denolfe/Makefile
@@ -2,18 +2,18 @@
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/keyboards/satan/rules.mk b/keyboards/satan/rules.mk
index 1102584d8..87a4a0595 100644
--- a/keyboards/satan/rules.mk
+++ b/keyboards/satan/rules.mk
@@ -52,15 +52,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?= yes   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/sixkeyboard/rules.mk b/keyboards/sixkeyboard/rules.mk
index 2c99985a9..6aedc7148 100644
--- a/keyboards/sixkeyboard/rules.mk
+++ b/keyboards/sixkeyboard/rules.mk
@@ -55,16 +55,16 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= no		# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no		# Console for debug(+400)
-COMMAND_ENABLE ?= no		# Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= no			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no	# Enable keyboard backlight functionality
-MIDI_ENABLE ?= no			# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no		# Unicode
-BLUETOOTH_ENABLE ?= no	# Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = no		# Audio control and System control(+450)
+CONSOLE_ENABLE = no		# Console for debug(+400)
+COMMAND_ENABLE = no		# Commands for debug and configuration
+SLEEP_LED_ENABLE = no	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = no			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no	# Enable keyboard backlight functionality
+MIDI_ENABLE = no			# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no		# Unicode
+BLUETOOTH_ENABLE = no	# Enable Bluetooth with the Adafruit EZ-Key HID
 CUSTOM_MATRIX = yes
\ No newline at end of file
diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk
index d8ec42365..dd5b2bbe0 100644
--- a/keyboards/tada68/rules.mk
+++ b/keyboards/tada68/rules.mk
@@ -52,15 +52,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/tiger_lily/rules.mk b/keyboards/tiger_lily/rules.mk
index dd2f4b6ee..fa53bea4d 100644
--- a/keyboards/tiger_lily/rules.mk
+++ b/keyboards/tiger_lily/rules.mk
@@ -51,21 +51,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
 CUSTOM_MATRIX = yes
 SRC += matrix.c
\ No newline at end of file
diff --git a/keyboards/tv44/rules.mk b/keyboards/tv44/rules.mk
index dbba6bace..786c9dc3e 100644
--- a/keyboards/tv44/rules.mk
+++ b/keyboards/tv44/rules.mk
@@ -53,17 +53,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
diff --git a/keyboards/vision_division/rules.mk b/keyboards/vision_division/rules.mk
index 6990960bf..5b739d4fd 100644
--- a/keyboards/vision_division/rules.mk
+++ b/keyboards/vision_division/rules.mk
@@ -54,17 +54,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=1024
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
\ No newline at end of file
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
\ No newline at end of file
diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk
index 565381e16..fb34dbb9a 100644
--- a/keyboards/whitefox/rules.mk
+++ b/keyboards/whitefox/rules.mk
@@ -58,16 +58,16 @@ OPT_DEFS =
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control
-#CONSOLE_ENABLE ?= yes	# Console for debug
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes	    # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
-BACKLIGHT_ENABLE ?= yes
-VISUALIZER_ENABLE ?= yes
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file
+BACKLIGHT_ENABLE = yes
+VISUALIZER_ENABLE = yes
 
 include $(KEYBOARD_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
-- 
cgit v1.2.3-70-g09d2


From 753809eed7873205baa6692d928d9c255308d22b Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Wed, 22 Mar 2017 14:24:04 -0400
Subject: adds debouncing to sixkeyboard

---
 keyboards/sixkeyboard/config.h                 |  4 +--
 keyboards/sixkeyboard/keymaps/default/keymap.c | 10 -------
 keyboards/sixkeyboard/matrix.c                 | 38 ++++++++++++++++++++------
 3 files changed, 31 insertions(+), 21 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/sixkeyboard/config.h b/keyboards/sixkeyboard/config.h
index bf58bb2b7..4ce25c670 100644
--- a/keyboards/sixkeyboard/config.h
+++ b/keyboards/sixkeyboard/config.h
@@ -107,8 +107,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* disable action features */
 //#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
+#define NO_ACTION_TAPPING
+#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
diff --git a/keyboards/sixkeyboard/keymaps/default/keymap.c b/keyboards/sixkeyboard/keymaps/default/keymap.c
index 641ed790e..74ce6f036 100644
--- a/keyboards/sixkeyboard/keymaps/default/keymap.c
+++ b/keyboards/sixkeyboard/keymaps/default/keymap.c
@@ -17,16 +17,6 @@ const uint16_t PROGMEM fn_actions[] = {
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
     return MACRO_NONE;
 };
 
diff --git a/keyboards/sixkeyboard/matrix.c b/keyboards/sixkeyboard/matrix.c
index ed1b70e28..37cc68a21 100644
--- a/keyboards/sixkeyboard/matrix.c
+++ b/keyboards/sixkeyboard/matrix.c
@@ -37,6 +37,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_stage[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint16_t debouncing_time;
+static bool debouncing = false;
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
@@ -78,14 +83,35 @@ void matrix_init(void)
     DDRD  &= ~(1<<6 | 1<<4 | 1<<1);
     PORTD |=  (1<<6 | 1<<4 | 1<<1);
 
-    matrix_init_kb();
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+        matrix_stage[i] = 0;
+    }
+
+    matrix_init_quantum();
 
 }
 
 uint8_t matrix_scan(void)
 {
-    matrix[0] = (PINC&(1<<7) ? 0 : (1<<0)) | (PINB&(1<<7) ? 0 : (1<<1)) | (PINB&(1<<5) ? 0 : (1<<2));
-    matrix[1] = (PIND&(1<<6) ? 0 : (1<<0)) | (PIND&(1<<1) ? 0 : (1<<1)) | (PIND&(1<<4) ? 0 : (1<<2));
+    matrix_stage[0] = (PINC&(1<<7) ? 0 : (1<<0)) | (PINB&(1<<7) ? 0 : (1<<1)) | (PINB&(1<<5) ? 0 : (1<<2));
+    matrix_stage[1] = (PIND&(1<<6) ? 0 : (1<<0)) | (PIND&(1<<1) ? 0 : (1<<1)) | (PIND&(1<<4) ? 0 : (1<<2));
+
+    if (memcmp(matrix_debouncing, matrix_stage, sizeof(matrix)) != 0) {
+        debouncing = true;
+        debouncing_time = timer_read();
+    }
+
+    matrix_debouncing[0] = matrix_stage[0];
+    matrix_debouncing[1] = matrix_stage[1];
+
+    if (debouncing && (timer_elapsed(debouncing_time) > 20)) {
+        for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+            matrix[i] = matrix_debouncing[i];
+        }
+        debouncing = false;
+    }
 
     matrix_scan_quantum();
 
@@ -111,12 +137,6 @@ matrix_row_t matrix_get_row(uint8_t row)
 
 void matrix_print(void)
 {
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
 }
 
 uint8_t matrix_key_count(void)
-- 
cgit v1.2.3-70-g09d2


From b7afa59c9714def787a08950d78ac674cf19728c Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Fri, 30 Jun 2017 16:30:18 -0400
Subject: remove warning

---
 keyboards/sixkeyboard/matrix.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'keyboards')

diff --git a/keyboards/sixkeyboard/matrix.c b/keyboards/sixkeyboard/matrix.c
index 37cc68a21..860452ebd 100644
--- a/keyboards/sixkeyboard/matrix.c
+++ b/keyboards/sixkeyboard/matrix.c
@@ -34,6 +34,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "sixkeyboard.h"
+#include <string.h>
 
 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix[MATRIX_ROWS];
-- 
cgit v1.2.3-70-g09d2


From 827dc6c715f8099562ef8b9d9208afbb51f706b8 Mon Sep 17 00:00:00 2001
From: Martin Gondermann <magicmonty@users.noreply.github.com>
Date: Mon, 3 Jul 2017 20:43:32 +0200
Subject: Add octave lights for midi layer (#1457)

---
 keyboards/clueboard/keymaps/magicmonty/keymap.c | 45 +++++++++++++++++++++++--
 1 file changed, 43 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/clueboard/keymaps/magicmonty/keymap.c b/keyboards/clueboard/keymaps/magicmonty/keymap.c
index 05ea1fa33..69772baf7 100644
--- a/keyboards/clueboard/keymaps/magicmonty/keymap.c
+++ b/keyboards/clueboard/keymaps/magicmonty/keymap.c
@@ -179,6 +179,47 @@ void clueboard_set_led(uint8_t id, uint8_t val) {
   }
 };
 
+const uint16_t oct_hues[10] = {
+  0,
+  30,
+  60,
+  90,
+  120,
+  150,
+  180,
+  210,
+  240,
+  300
+};
+
+#define MAX_OCT  9
+
+void clueboard_set_midi_led(uint8_t base_oct, uint8_t val)
+{
+  uint8_t sat = 255;
+
+  for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+    sethsv(oct_hues[base_oct], sat, val, (LED_TYPE *)&led[i]);
+  }
+
+  uint8_t next_oct = base_oct < MAX_OCT ? base_oct + 1 : base_oct;
+
+  uint16_t next_hue = base_oct < MAX_OCT ? oct_hues[next_oct] : 0;
+  uint8_t next_val = base_oct < MAX_OCT ? val : 0;
+  uint8_t next_sat = base_oct < MAX_OCT ? sat : 0;
+
+
+  for (uint8_t i = 0; i < 3; i++) {
+    sethsv(next_hue, next_sat, next_val, (LED_TYPE *)&led[i]);
+  }
+
+  for (uint8_t i = 11; i < 14; i++) {
+    sethsv(next_hue, next_sat, next_val, (LED_TYPE *)&led[i]);
+  }
+
+  rgblight_set();
+}
+
 void matrix_scan_user(void) {
     rgblight_config_t rgblight_config;
     rgblight_config.raw = eeconfig_read_rgblight();
@@ -197,10 +238,10 @@ void matrix_scan_user(void) {
         clueboard_set_led(LAYER_FUNCTION, val);
       }
     } else if (layer & (1<<_ML)) {
-        clueboard_set_led(LAYER_MOUSE, val);
+      clueboard_set_led(LAYER_MOUSE, val);
 #if defined(MIDI_ENABLE)
     } else if (layer & (1<<_MI)) {
-        clueboard_set_led(LAYER_MIDI, val);
+      clueboard_set_midi_led(midi_config.octave, val);
 #endif
     } else {
         clueboard_set_led(LAYER_BASE, val);
-- 
cgit v1.2.3-70-g09d2


From 062b3547ed712c3c32114382cffab1e16b1fd642 Mon Sep 17 00:00:00 2001
From: Kyle Terry <kyle@kyleterry.com>
Date: Mon, 3 Jul 2017 11:47:48 -0700
Subject: Keyboards/handwired magicforce61 (#1454)

* adding the magicforce61 under handwired

* I meant 14 cols
---
 keyboards/handwired/magicforce61/Makefile          |   3 +
 keyboards/handwired/magicforce61/README.md         |  24 +++
 keyboards/handwired/magicforce61/config.h          | 162 +++++++++++++++++++++
 .../magicforce61/keymaps/default/keymap.c          |  69 +++++++++
 keyboards/handwired/magicforce61/magicforce61.c    |   8 +
 keyboards/handwired/magicforce61/magicforce61.h    |  20 +++
 keyboards/handwired/magicforce61/rules.mk          |  83 +++++++++++
 7 files changed, 369 insertions(+)
 create mode 100644 keyboards/handwired/magicforce61/Makefile
 create mode 100644 keyboards/handwired/magicforce61/README.md
 create mode 100644 keyboards/handwired/magicforce61/config.h
 create mode 100644 keyboards/handwired/magicforce61/keymaps/default/keymap.c
 create mode 100644 keyboards/handwired/magicforce61/magicforce61.c
 create mode 100644 keyboards/handwired/magicforce61/magicforce61.h
 create mode 100644 keyboards/handwired/magicforce61/rules.mk

(limited to 'keyboards')

diff --git a/keyboards/handwired/magicforce61/Makefile b/keyboards/handwired/magicforce61/Makefile
new file mode 100644
index 000000000..191c6bb66
--- /dev/null
+++ b/keyboards/handwired/magicforce61/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/handwired/magicforce61/README.md b/keyboards/handwired/magicforce61/README.md
new file mode 100644
index 000000000..5a260f9ad
--- /dev/null
+++ b/keyboards/handwired/magicforce61/README.md
@@ -0,0 +1,24 @@
+Magicforce "61" Handwired
+=======================
+
+Basically I cut 7 keys off the magicforce68 and handwired everything to a
+teensy++ 2.0 to make it a ~60% board.
+
+## Wiring Layout
+
+![Wiring Layout](https://imgur.com/gallery/RxYyA)
+
+## Pinout
+
+The following pins are used:
+
+  ```
+  #define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 }
+  #define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 } 
+  ```
+
+## Compiling and loading the firmware
+
+To build the firmware, run `make handwired-magicforce61`.
+
+Flash the firmware using the teensy loader or avrdude.
diff --git a/keyboards/handwired/magicforce61/config.h b/keyboards/handwired/magicforce61/config.h
new file mode 100644
index 000000000..bb329541c
--- /dev/null
+++ b/keyboards/handwired/magicforce61/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Hexwire
+#define PRODUCT         Magicforce 61
+#define DESCRIPTION     Handwired Magicforce 61
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 }
+#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 } 
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/handwired/magicforce61/keymaps/default/keymap.c b/keyboards/handwired/magicforce61/keymaps/default/keymap.c
new file mode 100644
index 000000000..9559be5d2
--- /dev/null
+++ b/keyboards/handwired/magicforce61/keymaps/default/keymap.c
@@ -0,0 +1,69 @@
+#include "magicforce61.h"
+
+#define _QWERTY 0
+#define _FN1 1
+#define _FN2 2
+#define KC_ KC_TRNS
+#define KC_X0 LT(_FN2, KC_GRV)
+#define KC_X1 MO(_FN1)
+#define KC_NAV_ESC LT(_FN1, KC_ESC)
+#define KC_GUI MAGIC_UNNO_GUI
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = KEYMAP(
+ /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. */
+    GRV , 1  , 2  , 3  , 4  , 5  , 6  , 7  , 8  , 9  , 0  ,MINS,EQL ,  BSPC  ,
+ /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| */
+    TAB   , Q  , W  , E  , R  , T  , Y  , U  , I  , O  , P  ,LBRC,RBRC, BSLS ,
+ /*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| */
+    NAV_ESC    , A  , S  , D  , F  , G  , H  , J  , K  , L  ,SCLN,QUOT,  ENTER ,
+ /*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| */
+    LSPO   , Z  , X  , C  , V  , B  , N  , M  ,COMM,DOT ,SLSH,     RSPC  ,
+ /*|---------`----`----`----`----`----`----`----`----`----`----`-------------. */
+    LCTL , RGUI ,LALT ,            SPACE             ,  X1  ,RALT ,RCTL ,    X1
+ /*`-----+-----+-----+------------------------------+------+-----+-----' ANY   */
+  ),
+
+  [_FN1] = KEYMAP(
+ /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. */
+    GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,
+ /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| */
+          ,    , UP ,    ,    ,    ,    ,    ,INS ,PSCR,    ,    ,    ,      ,
+ /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| */
+           ,LEFT,DOWN,RGHT,    ,    ,    , PGDN , PGUP ,    ,    ,    ,      ,
+ /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| */
+             ,    ,    ,    ,    ,    ,VOLD,VOLU,MUTE,    ,    ,             ,
+ /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-. */
+         ,     ,     ,                              ,      ,     ,     , MPLY
+ /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' ANY   */
+  ),
+
+  [_FN2] = KEYMAP(
+ /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. */
+    GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,
+ /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| */
+          ,    ,    ,    ,    ,    ,    , 7  , 8  , 9  ,    ,    ,    ,      ,
+ /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| */
+           ,    ,    ,    ,    ,    ,    , 4  , 5  , 6  ,    ,    ,          ,
+ /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| */
+             ,    ,    ,    ,    ,    , 0  , 1  , 2  , 3  ,    ,             ,
+ /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-. */
+         ,     ,     ,                              ,      ,     ,     ,
+ /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' ANY   */
+  )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
diff --git a/keyboards/handwired/magicforce61/magicforce61.c b/keyboards/handwired/magicforce61/magicforce61.c
new file mode 100644
index 000000000..379395366
--- /dev/null
+++ b/keyboards/handwired/magicforce61/magicforce61.c
@@ -0,0 +1,8 @@
+#include "magicforce61.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
diff --git a/keyboards/handwired/magicforce61/magicforce61.h b/keyboards/handwired/magicforce61/magicforce61.h
new file mode 100644
index 000000000..784f2b2c8
--- /dev/null
+++ b/keyboards/handwired/magicforce61/magicforce61.h
@@ -0,0 +1,20 @@
+#ifndef MAGICFORCE61_H
+#define MAGICFORCE61_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,   K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,        K3D, \
+    K40, K41, K42,           K45,                 K49,  K4A,  K4C,   K4D \
+    ) { \
+  {  KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D  },  \
+  {  KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D  },  \
+  {  KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO,    KC_##K2D  },  \
+  {  KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_NO,    KC_##K3D  },  \
+  {  KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_NO,    KC_NO,    KC_NO,    KC_##K49, KC_##K4A, KC_NO,    KC_##K4C, KC_##K4D  },  \
+}
+
+#endif
diff --git a/keyboards/handwired/magicforce61/rules.mk b/keyboards/handwired/magicforce61/rules.mk
new file mode 100644
index 000000000..913bcb93e
--- /dev/null
+++ b/keyboards/handwired/magicforce61/rules.mk
@@ -0,0 +1,83 @@
+
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=1024
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+avrdude: build
+	ls /dev/tty* > /tmp/1; \
+	echo "Reset your Pro Micro now"; \
+	while [[ -z $$USB ]]; do \
+	  sleep 1; \
+	  ls /dev/tty* > /tmp/2; \
+	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+	done; \
+	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+.PHONY: avrdude
-- 
cgit v1.2.3-70-g09d2


From 34c8bf47a76c8a2dcd3b1a19dd608f8fb2fafb31 Mon Sep 17 00:00:00 2001
From: Martin Gondermann <magicmonty@users.noreply.github.com>
Date: Mon, 3 Jul 2017 20:48:48 +0200
Subject: Move Space Caded Parentheses to own layer (#1452)

* Move Space Caded Parentheses to own layer

The space cadet parentheses where too much distracting. Therefore they are now on the function layer. I also added two more layers for also having angle brackets and curly braces on the shift keys forr better access.

Also updated the README

* Fixed SHIFT+Function key conflict

* Removed Angle Bracket and Curly Bracket layers, as they don't work corrrectly
---
 keyboards/clueboard/keymaps/magicmonty/config.h  |  8 ++---
 keyboards/clueboard/keymaps/magicmonty/keymap.c  | 32 ++++++++++++++-----
 keyboards/clueboard/keymaps/magicmonty/readme.md | 39 ++++++++++++++++++------
 3 files changed, 56 insertions(+), 23 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/clueboard/keymaps/magicmonty/config.h b/keyboards/clueboard/keymaps/magicmonty/config.h
index 30b2a171e..d933fa997 100644
--- a/keyboards/clueboard/keymaps/magicmonty/config.h
+++ b/keyboards/clueboard/keymaps/magicmonty/config.h
@@ -26,13 +26,8 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 #define MIDI_TONE_KEYCODE_OCTAVES 2
 
-/* Disabling rollover allows you to use the opposite shift key to cancel the space cadet state in the event
-   of an erroneous press instead of emitting a pair of parentheses when the keys are released.
-*/
-#define DISABLE_SPACE_CADET_ROLLOVER
-
 /*
-  Setting the Space Cadet Parens for German layout
+  Setting the modified Space Cadet Parens for German layout
 
   Default is
   #define LSPO_KEY KC_9
@@ -40,5 +35,6 @@
 */
 #define LSPO_KEY KC_8
 #define RSPC_KEY KC_9
+#define PERMISSIVE_HOLD
 
 #endif
diff --git a/keyboards/clueboard/keymaps/magicmonty/keymap.c b/keyboards/clueboard/keymaps/magicmonty/keymap.c
index 69772baf7..3d00332b0 100644
--- a/keyboards/clueboard/keymaps/magicmonty/keymap.c
+++ b/keyboards/clueboard/keymaps/magicmonty/keymap.c
@@ -4,8 +4,6 @@
 #define GRAVE_MODS  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
 #define _______ KC_TRNS
 #define xxxxxxx KC_NO
-#define HPR_TAB ALL_T(KC_TAB)
-#define CTL_ESC CTL_T(KC_ESC)
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -23,14 +21,34 @@
   #define TO_MIDI _______
 #endif
 
+// go back to base layer
 #define TO_BASE TO(_BL)
+
+// switch to function layer while helde
 #define MO_FUNC MO(_FL)
+
+// switch to media layer  while held
 #define   MEDIA MO(_ME)
+
+// switch to Control layer while helde
 #define  MO_CTL MO(_CL)
+
+// switch to mouse layer if held, else space
 #define L_MOUSE LT(_ML, KC_SPC)
+
+// Function key when held, else ESC
 #define ESC_FUN LT(_FL, KC_ESC)
 
+// Hyper (CTRL+ALT+SHIFT+SUPER) when held, TAB when tapped
+#define HPR_TAB ALL_T(KC_TAB)
+
+// CTRL when held, ESC when tapped
+#define CTL_ESC CTL_T(KC_ESC)
+
+// ESC/Grave mode
 #define ESC_GRV F(0)
+
+// Reset RGB mode to layer signalling
 #define RGB_RST F(1)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -39,15 +57,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ESC_GRV,    KC_1,    KC_2,   KC_3,     KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,     KC_0, KC_MINS,   KC_EQL, _______, KC_BSPC,          KC_INS,  \
     HPR_TAB,    KC_Q,    KC_W,   KC_E,     KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,     KC_P, KC_LBRC,  KC_RBRC, KC_BSLS,                   KC_DEL,  \
     ESC_FUN,    KC_A,    KC_S,   KC_D,     KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,  KC_SCLN, KC_QUOT,  KC_NUHS,  KC_ENT,                            \
-    KC_LSPO, KC_NUBS,    KC_Z,   KC_X,     KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,   KC_DOT, KC_SLSH,  _______, KC_RSPC,          KC_UP,            \
+    KC_LSFT, KC_NUBS,    KC_Z,   KC_X,     KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,   KC_DOT, KC_SLSH,  _______, KC_RSFT,          KC_UP,            \
     KC_LCTL, KC_LGUI, KC_LALT,_______,                    L_MOUSE, L_MOUSE,                    _______, KC_RALT,  KC_RCTL, MO_FUNC, KC_LEFT, KC_DOWN, KC_RGHT),
 
-  /* Keymap _FL: Function Layer */
+  /* Keymap _FL: Function layer */
   [_FL] = KEYMAP(
      KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,   KC_F12, _______, _______,          BL_STEP, \
     _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______,  KC_PAUS, _______,  _______, _______,                   _______, \
     _______, _______,  MO_CTL, _______, _______, _______, KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT,  _______, _______,  _______, _______,                            \
-    _______, _______, _______, _______, _______, _______, _______, _______,   MEDIA, _______,  _______, TO_MIDI,  _______, _______,          KC_PGUP,          \
+    KC_LSPO, _______, _______, _______, _______, _______, _______, _______,   MEDIA, _______,  _______, TO_MIDI,  _______, KC_RSPC,          KC_PGUP,          \
     _______, _______, _______, _______,                   _______, _______,                    _______, _______,  _______, MO_FUNC, KC_HOME, KC_PGDN, KC_END),
 
   /* Keymap _ME: Media layer */
@@ -70,9 +88,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_ML] = KEYMAP(
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,  _______, _______, _______,          _______, \
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,  _______, _______,                   _______, \
-    _______, _______, KC_BTN3, KC_BTN2, KC_BTN1, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R,  _______, _______,  _______, _______,                            \
+    _______, _______, KC_BTN2, KC_BTN3, KC_BTN1, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R,  _______, _______,  _______, _______,                            \
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,  _______, _______,          KC_MS_U,          \
-    _______, _______, _______, _______,                   L_MOUSE, L_MOUSE,                    _______, KC_BTN1,  KC_BTN2, KC_BTN3, KC_MS_L, KC_MS_D, KC_MS_R),
+    _______, _______, _______, _______,                   L_MOUSE, L_MOUSE,                    _______, KC_BTN1,  KC_BTN3, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R),
 
 #if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
   /* Keymap _MI: MIDI layer (Advanced)*/
diff --git a/keyboards/clueboard/keymaps/magicmonty/readme.md b/keyboards/clueboard/keymaps/magicmonty/readme.md
index f9cc57311..e24212d04 100644
--- a/keyboards/clueboard/keymaps/magicmonty/readme.md
+++ b/keyboards/clueboard/keymaps/magicmonty/readme.md
@@ -2,23 +2,42 @@
 
 [Keyboard Layout Editor File]
 
-![Clueboard Layout Image](http://i.imgur.com/WFfJ15k.png)
+![Clueboard Layout Image](http://i.imgur.com/eEwjLEj.png)
+My ClueBoard Layout as of 2017/06/30
+
 
 This layout is a combination of the `mouse_keys` and the `win_optimized` layouts.
 This layout is optimized for an ISO layout.
+The CapsLock is disabled and works as ESC when tapped and FN when held.
+The `TAB` key works as `TAB` when tapped, and [HYPER] (`CTRL` + `ALT` + `SHIFT` + `CMD`) when held.
+
+## Mouse Layer
 
-It adds a mouse layer. When you hold down the spacebar the arrow keys
-will move your mouse cursor. You can click using the 3 mods to the left of the
-arrow keys, or the 3 keys under your primary fingers on the home row.
+When you hold down the spacebar the arrow keys will move your mouse cursor.
+You can click using the 3 mods to the left of the arrow keys, or the 3 keys under your primary fingers on the home row.
 The Left, Down, Up and Right for the mouse movement are also VIM-Like on the HJKL keys
 
-There is also a MIDI layer included.
+## MIDI layer
+
+The MIDI layer is permanently enabled by pressing `FN` + `/`.
+It can be exited with the `ESC`-Key
+
+## Space Cadet(ish) Shift Parentheses
+
+If the function layer is active, the `SHIFT`-Keys are configured like the [Space Cadet Shift Parentheses]
+as opened (left `SHIFT`) and closed (right `SHIFT`) parentheses if tapped and `SHIFT` if held.
+
+## Media layer
+
+The media layer with Volume/Play controls, can be accessed via `FN` + `m`
+
+## Control layer
 
-The CapsLock is disabled and works as Escape when tapped and Fn when Hold.
-The Tab key works as Tab when tapped, and [Hyper] (Ctrl + Alt + Shift + Cmd) when hold
-The Shift-Keys are configured as [Space Cadet Shift Parentheses]
+The control layer is accessed via `FN` + `s`.
+Here one can control the behavior of the RGB underlight.
+`FN` + `s` + `1` resets the RGB underlight to the Layer signalling mode
 
-There is also a separate media layer with Volume/Play controls
+## Layer signalling through underlight
 
 The different layers are signalled throug setting of the underlight:
 
@@ -29,6 +48,6 @@ The different layers are signalled throug setting of the underlight:
 - Control layer: Red
 - Midi layer: Purple
 
-[Hyper]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
+[HYPER]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
 [Space Cadet Shift Parentheses]: http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses
 [Keyboard Layout Editor File]: http://www.keyboard-layout-editor.com/#/gists/f869b8789242a712e0f46eabbd550056
-- 
cgit v1.2.3-70-g09d2


From dbcf0ba6cafa6ef35754c0a47fd4443ed6f0dca8 Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Tue, 4 Jul 2017 14:14:26 -0400
Subject: Added ECO keyboard folder and configuration files. Also added my
 (That-Canadian) keymap folder and files.

---
 keyboards/eco/Makefile                        |   5 +
 keyboards/eco/config.h                        |  68 ++++++++
 keyboards/eco/eco.c                           |   1 +
 keyboards/eco/eco.h                           |  10 ++
 keyboards/eco/keymaps/that-canadian/Makefile  |  25 +++
 keyboards/eco/keymaps/that-canadian/keymap.c  | 217 ++++++++++++++++++++++++++
 keyboards/eco/keymaps/that-canadian/readme.md |   1 +
 keyboards/eco/readme.md                       |   9 ++
 keyboards/eco/rev1/Makefile                   |   3 +
 keyboards/eco/rev1/config.h                   |  79 ++++++++++
 keyboards/eco/rev1/rev1.c                     |   1 +
 keyboards/eco/rev1/rev1.h                     |  24 +++
 keyboards/eco/rev1/rules.mk                   |   5 +
 keyboards/eco/rules.mk                        |  68 ++++++++
 14 files changed, 516 insertions(+)
 create mode 100644 keyboards/eco/Makefile
 create mode 100644 keyboards/eco/config.h
 create mode 100644 keyboards/eco/eco.c
 create mode 100644 keyboards/eco/eco.h
 create mode 100644 keyboards/eco/keymaps/that-canadian/Makefile
 create mode 100644 keyboards/eco/keymaps/that-canadian/keymap.c
 create mode 100644 keyboards/eco/keymaps/that-canadian/readme.md
 create mode 100644 keyboards/eco/readme.md
 create mode 100644 keyboards/eco/rev1/Makefile
 create mode 100644 keyboards/eco/rev1/config.h
 create mode 100644 keyboards/eco/rev1/rev1.c
 create mode 100644 keyboards/eco/rev1/rev1.h
 create mode 100644 keyboards/eco/rev1/rules.mk
 create mode 100644 keyboards/eco/rules.mk

(limited to 'keyboards')

diff --git a/keyboards/eco/Makefile b/keyboards/eco/Makefile
new file mode 100644
index 000000000..30b43c4ea
--- /dev/null
+++ b/keyboards/eco/Makefile
@@ -0,0 +1,5 @@
+SUBPROJECT_DEFAULT = rev1
+
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h
new file mode 100644
index 000000000..b5676d5af
--- /dev/null
+++ b/keyboards/eco/config.h
@@ -0,0 +1,68 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x1337
+#define PRODUCT_ID      0x6006
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Bishop Keyboards
+#define PRODUCT         The ECO Keyboard
+#define DESCRIPTION     An economical ortholinear keyboard
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/eco/eco.c b/keyboards/eco/eco.c
new file mode 100644
index 000000000..84097652d
--- /dev/null
+++ b/keyboards/eco/eco.c
@@ -0,0 +1 @@
+#include "eco.h"
diff --git a/keyboards/eco/eco.h b/keyboards/eco/eco.h
new file mode 100644
index 000000000..9da33b9b8
--- /dev/null
+++ b/keyboards/eco/eco.h
@@ -0,0 +1,10 @@
+#ifndef ECO_H
+#define ECO_H
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"
+
+#endif
\ No newline at end of file
diff --git a/keyboards/eco/keymaps/that-canadian/Makefile b/keyboards/eco/keymaps/that-canadian/Makefile
new file mode 100644
index 000000000..7dab97942
--- /dev/null
+++ b/keyboards/eco/keymaps/that-canadian/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/eco/keymaps/that-canadian/keymap.c b/keyboards/eco/keymaps/that-canadian/keymap.c
new file mode 100644
index 000000000..37637bce3
--- /dev/null
+++ b/keyboards/eco/keymaps/that-canadian/keymap.c
@@ -0,0 +1,217 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+// Below layout is based upon /u/That-Canadian's planck layout
+
+#include "eco.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 2
+#define _RAISE 3
+
+#define _FUNCTION 15
+#define _ADJUST 16
+
+enum eco_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   (  |   )  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Func |   A  |   S  |   D  |   F  |   G  |   [  |   ]  |   H  |   J  |   K  |   L  |   ;  | Enter|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |   }  |   N  |   M  |   ,  |   .  |   /  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  `   | GUI  | Alt  |Lower | Space|Pg-dwn| Pg-up| Space|Raise | Left | Down |  Up  |Right |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  	  KC_Q,   KC_W,    KC_E,    KC_R,  KC_T,   KC_LPRN, KC_RPRN, KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {MO(_FUNCTION), KC_A,   KC_S,    KC_D,    KC_F,  KC_G,   KC_LBRC, KC_RBRC, KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_ENT},
+  {OSM(MOD_LSFT), KC_Z,   KC_X,    KC_C,    KC_V,  KC_B,   KC_LCBR, KC_RCBR, KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT},
+  {KC_LCTL, 	  KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_PGDN, KC_PGUP, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Esc  |   !  |   @  |   #  |   $  |   %  |      |      |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |  F6  |   _  |   +  |   {  |   }  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      | Mute |      |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower |      |      |      | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_ESC,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+  {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,  _______, _______, KC_MUTE, _______, KC_PIPE},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Raise
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |      |      |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   4  |   5  |   6  |   +  |      |      |      |      |   -  |   =  |   [  |   ]  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Enter |   7  |   8  |   9  |   -  |      |      |      |      |      |      | Mute |      |   \  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ,  |   0  |  .   |Lower | Bksp |      |      |      |Raise | Next | Vol- | Vol+ | Play |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_ESC,  KC_1,    KC_2, KC_3,   KC_4,    KC_5,    _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL},
+  {_______, KC_4,    KC_5, KC_6,   KC_PLUS, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______},
+  {KC_ENT,  KC_7,    KC_8, KC_9,   KC_MINS, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_BSLS},
+  {_______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-------------------------------------------------------------------------------------------------.
+ * |Taskmg| Reset|      |      |      |      |      |      |      |      |      |      |      |caltde|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |qqqqqqqqq
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {TSKMGR,  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CALTDEL},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+},
+
+/* Function
+ * ,-------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Caps |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = {
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______},
+  {KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
diff --git a/keyboards/eco/keymaps/that-canadian/readme.md b/keyboards/eco/keymaps/that-canadian/readme.md
new file mode 100644
index 000000000..aa3316af0
--- /dev/null
+++ b/keyboards/eco/keymaps/that-canadian/readme.md
@@ -0,0 +1 @@
+# ECO Layout by u/That-Canadian
\ No newline at end of file
diff --git a/keyboards/eco/readme.md b/keyboards/eco/readme.md
new file mode 100644
index 000000000..3f6bc2d28
--- /dev/null
+++ b/keyboards/eco/readme.md
@@ -0,0 +1,9 @@
+ECO
+===
+
+![Planck](http://i.imgur.com/q2M3uEU.jpg)
+
+An economical 4x14 ortholinear keyboard
+
+Design and concept by : BishopKeyboards
+PCB by : u/That-Canadian
diff --git a/keyboards/eco/rev1/Makefile b/keyboards/eco/rev1/Makefile
new file mode 100644
index 000000000..4e2a6f00f
--- /dev/null
+++ b/keyboards/eco/rev1/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/eco/rev1/config.h b/keyboards/eco/rev1/config.h
new file mode 100644
index 000000000..c25723e84
--- /dev/null
+++ b/keyboards/eco/rev1/config.h
@@ -0,0 +1,79 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x1337
+#define PRODUCT_ID      0x6006
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Bishop Keyboards
+#define PRODUCT         The ECO Keyboard
+#define DESCRIPTION     An economical ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 14
+
+/* Planck PCB default pin-out */
+#define MATRIX_ROW_PINS { B1, B6, B2, B3 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 }
+#define UNUSED_PINS
+
+#define CATERINA_BOOTLOADER
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/eco/rev1/rev1.c b/keyboards/eco/rev1/rev1.c
new file mode 100644
index 000000000..84097652d
--- /dev/null
+++ b/keyboards/eco/rev1/rev1.c
@@ -0,0 +1 @@
+#include "eco.h"
diff --git a/keyboards/eco/rev1/rev1.h b/keyboards/eco/rev1/rev1.h
new file mode 100644
index 000000000..41541ac05
--- /dev/null
+++ b/keyboards/eco/rev1/rev1.h
@@ -0,0 +1,24 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "../eco.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+//void promicro_bootloader_jmp(bool program);
+
+#define KEYMAP( \
+	k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \
+	k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \
+	k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214, \
+	k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314  \
+	) \
+	{ \
+		{ k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014 }, \
+		{ k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114 }, \
+		{ k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214 }, \
+		{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 }  \
+	}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/eco/rev1/rules.mk b/keyboards/eco/rev1/rules.mk
new file mode 100644
index 000000000..a0825b4ef
--- /dev/null
+++ b/keyboards/eco/rev1/rules.mk
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/eco/rules.mk b/keyboards/eco/rules.mk
new file mode 100644
index 000000000..cf26cdc0d
--- /dev/null
+++ b/keyboards/eco/rules.mk
@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-- 
cgit v1.2.3-70-g09d2


From f7b8148c122f250b9c10c8da093bd30d3669cca0 Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Tue, 4 Jul 2017 14:19:49 -0400
Subject: Updated ECO readme file, includes picture of ECO now.

---
 keyboards/eco/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/eco/readme.md b/keyboards/eco/readme.md
index 3f6bc2d28..942e1800a 100644
--- a/keyboards/eco/readme.md
+++ b/keyboards/eco/readme.md
@@ -1,7 +1,7 @@
 ECO
 ===
 
-![Planck](http://i.imgur.com/q2M3uEU.jpg)
+![ECO](http://i.imgur.com/YligKxr.jpg)
 
 An economical 4x14 ortholinear keyboard
 
-- 
cgit v1.2.3-70-g09d2


From 2cf97c6d902167f08448bb3c840f102fe3942b95 Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Tue, 4 Jul 2017 15:26:25 -0400
Subject: Updated ECO files to follow proper formatting. Also updated
 that-canadian keymap to take out extraneous characters.

---
 keyboards/eco/config.h                       | 11 +++++-
 keyboards/eco/keymaps/that-canadian/keymap.c |  2 +-
 keyboards/eco/readme.md                      | 10 ++++-
 keyboards/eco/rev1/config.h                  | 57 ++--------------------------
 4 files changed, 23 insertions(+), 57 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/eco/config.h b/keyboards/eco/config.h
index b5676d5af..af7e1822c 100644
--- a/keyboards/eco/config.h
+++ b/keyboards/eco/config.h
@@ -23,11 +23,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0x1337
 #define PRODUCT_ID      0x6006
-#define DEVICE_VER      0x0001
 #define MANUFACTURER    Bishop Keyboards
 #define PRODUCT         The ECO Keyboard
 #define DESCRIPTION     An economical ortholinear keyboard
 
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 14
+
+#define CATERINA_BOOTLOADER
+
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
@@ -65,4 +70,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+#ifdef SUBPROJECT_rev1
+    #include "rev1/config.h"
+#endif
+
 #endif
diff --git a/keyboards/eco/keymaps/that-canadian/keymap.c b/keyboards/eco/keymaps/that-canadian/keymap.c
index 37637bce3..87f859e8e 100644
--- a/keyboards/eco/keymaps/that-canadian/keymap.c
+++ b/keyboards/eco/keymaps/that-canadian/keymap.c
@@ -99,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |qqqqqqqqq
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
  * `-------------------------------------------------------------------------------------------------'
diff --git a/keyboards/eco/readme.md b/keyboards/eco/readme.md
index 942e1800a..819648a2a 100644
--- a/keyboards/eco/readme.md
+++ b/keyboards/eco/readme.md
@@ -5,5 +5,11 @@ ECO
 
 An economical 4x14 ortholinear keyboard
 
-Design and concept by : BishopKeyboards
-PCB by : u/That-Canadian
+Keyboard Maintainer: BishopKeyboards and That-Canadian
+Hardware Supported: ECO PCB rev1 Pro Micro
+
+Make example for this keyboard (after setting up your build environment):
+
+    make eco-rev1-that-canadian
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file
diff --git a/keyboards/eco/rev1/config.h b/keyboards/eco/rev1/config.h
index c25723e84..1e97a703d 100644
--- a/keyboards/eco/rev1/config.h
+++ b/keyboards/eco/rev1/config.h
@@ -15,65 +15,16 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
 
-#include "config_common.h"
+#include "../config.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0x1337
-#define PRODUCT_ID      0x6006
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Bishop Keyboards
-#define PRODUCT         The ECO Keyboard
-#define DESCRIPTION     An economical ortholinear keyboard
 
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 14
-
-/* Planck PCB default pin-out */
+/* ECO V1 pin-out */
 #define MATRIX_ROW_PINS { B1, B6, B2, B3 }
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 }
 #define UNUSED_PINS
 
-#define CATERINA_BOOTLOADER
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
 #endif
-- 
cgit v1.2.3-70-g09d2


From b3d2f050323bcfda1517b26f4adcb54e7af87c51 Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Tue, 4 Jul 2017 15:41:14 -0400
Subject: Changed - to _ for keymap that-canadian for compatability reasons.

---
 keyboards/eco/keymaps/that-canadian/Makefile  |  25 ---
 keyboards/eco/keymaps/that-canadian/keymap.c  | 217 --------------------------
 keyboards/eco/keymaps/that-canadian/readme.md |   1 -
 keyboards/eco/keymaps/that_canadian/Makefile  |  25 +++
 keyboards/eco/keymaps/that_canadian/keymap.c  | 217 ++++++++++++++++++++++++++
 keyboards/eco/keymaps/that_canadian/readme.md |   1 +
 keyboards/eco/readme.md                       |   2 +-
 7 files changed, 244 insertions(+), 244 deletions(-)
 delete mode 100644 keyboards/eco/keymaps/that-canadian/Makefile
 delete mode 100644 keyboards/eco/keymaps/that-canadian/keymap.c
 delete mode 100644 keyboards/eco/keymaps/that-canadian/readme.md
 create mode 100644 keyboards/eco/keymaps/that_canadian/Makefile
 create mode 100644 keyboards/eco/keymaps/that_canadian/keymap.c
 create mode 100644 keyboards/eco/keymaps/that_canadian/readme.md

(limited to 'keyboards')

diff --git a/keyboards/eco/keymaps/that-canadian/Makefile b/keyboards/eco/keymaps/that-canadian/Makefile
deleted file mode 100644
index 7dab97942..000000000
--- a/keyboards/eco/keymaps/that-canadian/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no          # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
diff --git a/keyboards/eco/keymaps/that-canadian/keymap.c b/keyboards/eco/keymaps/that-canadian/keymap.c
deleted file mode 100644
index 87f859e8e..000000000
--- a/keyboards/eco/keymaps/that-canadian/keymap.c
+++ /dev/null
@@ -1,217 +0,0 @@
-// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
-// this is the style you want to emulate.
-
-// Below layout is based upon /u/That-Canadian's planck layout
-
-#include "eco.h"
-#include "action_layer.h"
-#ifdef AUDIO_ENABLE
-  #include "audio.h"
-#endif
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _LOWER 2
-#define _RAISE 3
-
-#define _FUNCTION 15
-#define _ADJUST 16
-
-enum eco_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-// Defines for task manager and such
-#define CALTDEL LCTL(LALT(KC_DEL))
-#define TSKMGR LCTL(LSFT(KC_ESC))
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,-------------------------------------------------------------------------------------------------.
- * | Tab  |   Q  |   W  |   E  |   R  |   T  |   (  |   )  |   Y  |   U  |   I  |   O  |   P  | Bksp |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | Func |   A  |   S  |   D  |   F  |   G  |   [  |   ]  |   H  |   J  |   K  |   L  |   ;  | Enter|
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |   }  |   N  |   M  |   ,  |   .  |   /  |  '   |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | Ctrl |  `   | GUI  | Alt  |Lower | Space|Pg-dwn| Pg-up| Space|Raise | Left | Down |  Up  |Right |
- * `-------------------------------------------------------------------------------------------------'
- */
-[_QWERTY] = {
-  {KC_TAB,  	  KC_Q,   KC_W,    KC_E,    KC_R,  KC_T,   KC_LPRN, KC_RPRN, KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC},
-  {MO(_FUNCTION), KC_A,   KC_S,    KC_D,    KC_F,  KC_G,   KC_LBRC, KC_RBRC, KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_ENT},
-  {OSM(MOD_LSFT), KC_Z,   KC_X,    KC_C,    KC_V,  KC_B,   KC_LCBR, KC_RCBR, KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT},
-  {KC_LCTL, 	  KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_PGDN, KC_PGUP, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
-},
-
-/* Lower
- * ,-------------------------------------------------------------------------------------------------.
- * | Esc  |   !  |   @  |   #  |   $  |   %  |      |      |   ^  |   &  |   *  |   (  |   )  | Del  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |  F6  |   _  |   +  |   {  |   }  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      | Mute |      |  |   |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |Lower |      |      |      | Bksp |Raise | Next | Vol- | Vol+ | Play |
- * `-------------------------------------------------------------------------------------------------'
- */
-[_LOWER] = {
-  {KC_ESC,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
-  {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______},
-  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,  _______, _______, KC_MUTE, _______, KC_PIPE},
-  {_______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
-},
-
-/* Raise
- * ,-------------------------------------------------------------------------------------------------.
- * | Esc  |   1  |   2  |   3  |   4  |   5  |      |      |   6  |   7  |   8  |   9  |   0  | Del  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |   4  |   5  |   6  |   +  |      |      |      |      |   -  |   =  |   [  |   ]  |Enter |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |Enter |   7  |   8  |   9  |   -  |      |      |      |      |      |      | Mute |      |   \  |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |   ,  |   0  |  .   |Lower | Bksp |      |      |      |Raise | Next | Vol- | Vol+ | Play |
- * `-------------------------------------------------------------------------------------------------'
- */
-[_RAISE] = {
-  {KC_ESC,  KC_1,    KC_2, KC_3,   KC_4,    KC_5,    _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL},
-  {_______, KC_4,    KC_5, KC_6,   KC_PLUS, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______},
-  {KC_ENT,  KC_7,    KC_8, KC_9,   KC_MINS, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_BSLS},
-  {_______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
-},
-
-/* Adjust (Lower + Raise)
- * ,-------------------------------------------------------------------------------------------------.
- * |Taskmg| Reset|      |      |      |      |      |      |      |      |      |      |      |caltde|
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
- * `-------------------------------------------------------------------------------------------------'
- */
-[_ADJUST] = {
-  {TSKMGR,  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CALTDEL},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
-},
-
-/* Function
- * ,-------------------------------------------------------------------------------------------------.
- * |      |      |      |      |      |      |      |      |      |      |  Up  |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      | Left | Down |Right |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * | Caps |      |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
- * `-------------------------------------------------------------------------------------------------'
- */
-[_FUNCTION] = {
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______},
-  {KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
-}
-
-};
-
-#ifdef AUDIO_ENABLE
-
-float tone_startup[][2]    = SONG(STARTUP_SOUND);
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
-
-float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
-
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
-        #endif
-        persistant_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-    #ifdef AUDIO_ENABLE
-        startup_user();
-    #endif
-}
-
-#ifdef AUDIO_ENABLE
-
-void startup_user()
-{
-    _delay_ms(20); // gets rid of tick
-    PLAY_NOTE_ARRAY(tone_startup, false, 0);
-}
-
-void shutdown_user()
-{
-    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
-    _delay_ms(150);
-    stop_all_notes();
-}
-
-void music_on_user(void)
-{
-    music_scale_user();
-}
-
-void music_scale_user(void)
-{
-    PLAY_NOTE_ARRAY(music_scale, false, 0);
-}
-
-#endif
diff --git a/keyboards/eco/keymaps/that-canadian/readme.md b/keyboards/eco/keymaps/that-canadian/readme.md
deleted file mode 100644
index aa3316af0..000000000
--- a/keyboards/eco/keymaps/that-canadian/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# ECO Layout by u/That-Canadian
\ No newline at end of file
diff --git a/keyboards/eco/keymaps/that_canadian/Makefile b/keyboards/eco/keymaps/that_canadian/Makefile
new file mode 100644
index 000000000..7dab97942
--- /dev/null
+++ b/keyboards/eco/keymaps/that_canadian/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/eco/keymaps/that_canadian/keymap.c b/keyboards/eco/keymaps/that_canadian/keymap.c
new file mode 100644
index 000000000..87f859e8e
--- /dev/null
+++ b/keyboards/eco/keymaps/that_canadian/keymap.c
@@ -0,0 +1,217 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+// Below layout is based upon /u/That-Canadian's planck layout
+
+#include "eco.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 2
+#define _RAISE 3
+
+#define _FUNCTION 15
+#define _ADJUST 16
+
+enum eco_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   (  |   )  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Func |   A  |   S  |   D  |   F  |   G  |   [  |   ]  |   H  |   J  |   K  |   L  |   ;  | Enter|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |   }  |   N  |   M  |   ,  |   .  |   /  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  `   | GUI  | Alt  |Lower | Space|Pg-dwn| Pg-up| Space|Raise | Left | Down |  Up  |Right |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  	  KC_Q,   KC_W,    KC_E,    KC_R,  KC_T,   KC_LPRN, KC_RPRN, KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {MO(_FUNCTION), KC_A,   KC_S,    KC_D,    KC_F,  KC_G,   KC_LBRC, KC_RBRC, KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_ENT},
+  {OSM(MOD_LSFT), KC_Z,   KC_X,    KC_C,    KC_V,  KC_B,   KC_LCBR, KC_RCBR, KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT},
+  {KC_LCTL, 	  KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_PGDN, KC_PGUP, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Esc  |   !  |   @  |   #  |   $  |   %  |      |      |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |  F6  |   _  |   +  |   {  |   }  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      | Mute |      |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower |      |      |      | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_ESC,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+  {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,  _______, _______, KC_MUTE, _______, KC_PIPE},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Raise
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |      |      |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   4  |   5  |   6  |   +  |      |      |      |      |   -  |   =  |   [  |   ]  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Enter |   7  |   8  |   9  |   -  |      |      |      |      |      |      | Mute |      |   \  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ,  |   0  |  .   |Lower | Bksp |      |      |      |Raise | Next | Vol- | Vol+ | Play |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_ESC,  KC_1,    KC_2, KC_3,   KC_4,    KC_5,    _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL},
+  {_______, KC_4,    KC_5, KC_6,   KC_PLUS, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______},
+  {KC_ENT,  KC_7,    KC_8, KC_9,   KC_MINS, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_BSLS},
+  {_______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-------------------------------------------------------------------------------------------------.
+ * |Taskmg| Reset|      |      |      |      |      |      |      |      |      |      |      |caltde|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {TSKMGR,  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CALTDEL},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+},
+
+/* Function
+ * ,-------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Caps |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = {
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______},
+  {KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
diff --git a/keyboards/eco/keymaps/that_canadian/readme.md b/keyboards/eco/keymaps/that_canadian/readme.md
new file mode 100644
index 000000000..aa3316af0
--- /dev/null
+++ b/keyboards/eco/keymaps/that_canadian/readme.md
@@ -0,0 +1 @@
+# ECO Layout by u/That-Canadian
\ No newline at end of file
diff --git a/keyboards/eco/readme.md b/keyboards/eco/readme.md
index 819648a2a..8fef3a1ce 100644
--- a/keyboards/eco/readme.md
+++ b/keyboards/eco/readme.md
@@ -10,6 +10,6 @@ Hardware Supported: ECO PCB rev1 Pro Micro
 
 Make example for this keyboard (after setting up your build environment):
 
-    make eco-rev1-that-canadian
+    make eco-rev1-that_canadian
 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file
-- 
cgit v1.2.3-70-g09d2


From 60eb2e140d611d08ff6afb766d2f9af7bfb1b1d6 Mon Sep 17 00:00:00 2001
From: skullydazed <skullydazed@users.noreply.github.com>
Date: Wed, 5 Jul 2017 00:15:09 -0700
Subject: Update the clueboard readmes (#1459)

---
 keyboards/clueboard/readme.md | 102 +++++-------------------------------------
 keyboards/cluecard/readme.md  |  31 ++++---------
 keyboards/cluepad/readme.md   |  17 +++++--
 3 files changed, 33 insertions(+), 117 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md
index 4a76e2908..95b69befc 100644
--- a/keyboards/clueboard/readme.md
+++ b/keyboards/clueboard/readme.md
@@ -1,97 +1,17 @@
-Clueboard keyboard firmware
-======================
+# Clueboard 66%
 
-DIY/Assembled compact 66% keyboard by [Clueboard](http://clueboard.co).
+![Clueboard](https://static1.squarespace.com/static/55c13bdee4b099be5dcb82eb/t/5867eeaad2b857fd0d196f4b/1494021396651/IMGP4201.jpg?format=1500w)
 
-For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
+A fully customizable 66% keyboard.
 
-## First Time Setup
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Clueboard 66% PCB
+  * rev1 (1.0)
+  * rev2 (2.0, 2.0.1, 2.1, 2.5, 2.5.1, 2.6)
+* Hardware Availability: [clueboard.co](https://clueboard.co/)
 
-Download or clone the whole firmware and navigate to the keyboards/clueboard directory. Once your dev env is setup, you'll be able to generate the default .hex:
+Make example for this keyboard (after setting up your build environment):
 
-```
-$ make
-```
+    make cluepad-default
 
-You will see a lot of output and if everything worked correctly you will see something similar to this:
-
-```
-Size after:
-   text	   data	    bss	    dec	    hex	filename
-      0	  19992	      0	  19992	   4e18	clueboard_rev2_default.hex
-```
-
-At this point you can press RESET on your Clueboard and flash your keyboard with this command:
-
-```
-$ make dfu
-```
-
-If you would like to use one of the alternative keymaps, or create your own, see below.
-
-## Clueboard 1.0
-
-If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `rev1` to your make command, like this:
-
-```
-$ make rev1
-```
-
-And when flashing your keyboard:
-
-```
-$ make rev1-dfu
-```
-
-If you are flashing an alternative layout to your rev1, include both `rev1` and `<keymap>` in your command, for example when flashing max:
-
-```
-$ make rev1-max-dfu
-```
-
-## Alternate Keymaps
-
-There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `<keymap>` to your command:
-
-```
-$ make skully
-```
-
-And when flashing your keyboard, put `<keymap>` between "make" and "dfu":
-
-```
-$ make skully-dfu
-```
-
-### Notable Layouts
-
-These layouts are notable for one reason or another. If you are looking for ideas or inspiration you should look at these first:
-
-* [keymaps/default](keymaps/default) - The default Clueboard layout
-* [keymaps/max](keymaps/max) - A maximised layout that makes use of every key and feature of the Clueboard 2.0 PCB.
-* [keymaps/skully](keymaps/skully) - The layout that @skullydazed uses on his own Clueboards.
-
-## Create Your Own Keymap
-
-There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend:
-
-* Copy `[keymaps/default](keymaps/default/)` to `keymaps/<your_layout>`.
-* Compile the firmware (`$ make <your_layout>`)
-* Flash the firmware (`$ make <your_layout>-dfu`)
-* Make sure everything works like the default keyboard
-* Modify `keymaps/<your_layout>/readme.md` to tell others about your layout.
-* Modify `keymaps/<your_layout>/keymap.c` to reflect your desired layout.
-* Compile your new custom firmware (`$ make <your_layout>`)
-** If you have warnings you may flash without fixing them, but something may not work right.
-** If you have any errors you must fix them before continuing.
-* Flash the firmware (`$ make <your_layout>-dfu`)
-
-## Share Your Keymap
-
-Got your layout dialed in? Please share it with the world so we can benefit from your work! Simply submit a pull request with your layout and we'll include it in the official repository. Please use the following guidelines when putting together your pull request:
-
-* Include a readme.md that states what your primary keyboard use is, how your layout differs from the default, and highlights anything you think makes your layout particularly great.
-* If your layout requires certain features (EG, RGB underlight or backlighting) ensure you have a Makefile and config.h that reflects that
-* If your layout requires special hardware to be added, please describe that in the readme.md
-
-TODO: Write up or link quick how-to on creating and submitting a PR. (Pull requests accepted. :)
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/cluecard/readme.md b/keyboards/cluecard/readme.md
index be13fc017..d9daa0b2b 100644
--- a/keyboards/cluecard/readme.md
+++ b/keyboards/cluecard/readme.md
@@ -1,28 +1,13 @@
-cluecard keyboard firmware
-======================
+# Cluecard
 
-## Quantum MK Firmware
+A simple QMK dev kit.
 
-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Cluecard 1.0
+* Hardware Availability: Special gift from [skullydazed](https://github.com/skullydazed)
 
-## Building
+Make example for this keyboard (after setting up your build environment):
 
-Download or clone the whole firmware and navigate to the keyboards/cluecard folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+    make cluecard-default
 
-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-
-To build with the default keymap, simply run `make default`.
-
-### Other Keymaps
-
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
-
-```
-$ make [default|jack|<name>]
-```
-
-Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/cluepad/readme.md b/keyboards/cluepad/readme.md
index 8450340f2..f79d6b559 100644
--- a/keyboards/cluepad/readme.md
+++ b/keyboards/cluepad/readme.md
@@ -1,4 +1,15 @@
-Cluepad number pad firmware
-======================
+# Cluepad
 
-TODO: to be updated.
+![Cluepad](https://static1.squarespace.com/static/55c13bdee4b099be5dcb82eb/5842fbdce3df28eae5ec557e/5844fb2cb8a79bbdfd63bad1/1498501250178/IMGP3931.jpg?format=750w)
+
+A basic 17 key numpad PCB.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Cluepad PCB 1.0
+* Hardware Availability: [clueboard.co](https://clueboard.co/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cluepad-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
-- 
cgit v1.2.3-70-g09d2


From 4587bb8786fa8ab4553cec445a3e52fe9e1edf02 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Wed, 5 Jul 2017 11:50:18 +0200
Subject: - Fixed DK60 version in config.h

---
 keyboards/dk60/config.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/dk60/config.h b/keyboards/dk60/config.h
index 9c5232ef0..5b712fe9b 100644
--- a/keyboards/dk60/config.h
+++ b/keyboards/dk60/config.h
@@ -23,7 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     /* USB Device descriptor parameter */
     #define VENDOR_ID       0xFEED
     #define PRODUCT_ID      0x6060
-    #define DEVICE_VER      0x0003
+    #define DEVICE_VER      0x0001
     #define MANUFACTURER    DARKOU
     #define PRODUCT         DK60
     #define DESCRIPTION     QMK keyboard firmware for DK60 support
-- 
cgit v1.2.3-70-g09d2


From d638547cd094a27686fe0c9b934d9d3879aaa1b9 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Wed, 5 Jul 2017 11:50:35 +0200
Subject: - Updated dk60 readme with new QMK rules

---
 keyboards/dk60/readme.md | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/dk60/readme.md b/keyboards/dk60/readme.md
index 544b5b0d1..4e7d17960 100644
--- a/keyboards/dk60/readme.md
+++ b/keyboards/dk60/readme.md
@@ -1,8 +1,17 @@
-DK60 keyboard firmware
-======================
+DK60
+===
 
-Another 60% keyboard with different HHKB layout
+![DK60](https://github.com/Dbroqua/DK60/raw/master/Previews/DK60.png)
 
-More information here: https://github.com/Dbroqua/DK60
+Another 60% keyboard with different HHKB layout made and sold by dbroqua. [More info on qmk.fm](https://github.com/Dbroqua/DK60/)
+
+* Keyboard Maintainer: [Damien Broqua aka DarKou](https://github.com/Dbroqua)
+* Hardware Supported: DK60 PCB revA
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dk60-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
 Open Hardware project!
-- 
cgit v1.2.3-70-g09d2


From c41d40c4228d59639ed480f323156a338aefb9f8 Mon Sep 17 00:00:00 2001
From: dbroqua <dbroqua@mousur.org>
Date: Wed, 5 Jul 2017 11:53:32 +0200
Subject: - Fixed wording in readme

---
 keyboards/dk60/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/dk60/readme.md b/keyboards/dk60/readme.md
index 4e7d17960..5eba79150 100644
--- a/keyboards/dk60/readme.md
+++ b/keyboards/dk60/readme.md
@@ -3,7 +3,7 @@ DK60
 
 ![DK60](https://github.com/Dbroqua/DK60/raw/master/Previews/DK60.png)
 
-Another 60% keyboard with different HHKB layout made and sold by dbroqua. [More info on qmk.fm](https://github.com/Dbroqua/DK60/)
+Another 60% keyboard with different HHKB layout made and sold by dbroqua. [More info on github/dbroqua](https://github.com/Dbroqua/DK60/)
 
 * Keyboard Maintainer: [Damien Broqua aka DarKou](https://github.com/Dbroqua)
 * Hardware Supported: DK60 PCB revA
-- 
cgit v1.2.3-70-g09d2


From fdc2e8058b46f569a7a68ab21ef9cb3d20a9bdc2 Mon Sep 17 00:00:00 2001
From: Shayne Holmes <shayneh@qualtrics.com>
Date: Thu, 29 Jun 2017 10:02:38 -0700
Subject: Allow broader send_string layout customizability via compile flag

Refactor new-ish JIS_KEYCODE send_string implementation with existing
send_string

Reshuffle JIS in line with other alternative keycodes for sendstring,
and make them all accessible via compile-time options

Add a separate function to allow sending a string with a delay.
---
 keyboards/planck/keymaps/rai-suta/Makefile |   2 +-
 quantum/quantum.c                          | 236 ++++++++++++-----------------
 quantum/quantum.h                          |   1 +
 3 files changed, 96 insertions(+), 143 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/planck/keymaps/rai-suta/Makefile b/keyboards/planck/keymaps/rai-suta/Makefile
index 4263440ec..5238d3201 100644
--- a/keyboards/planck/keymaps/rai-suta/Makefile
+++ b/keyboards/planck/keymaps/rai-suta/Makefile
@@ -21,7 +21,7 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 # Option defines
-OPT_DEFS += -DJIS_KEYCODE
+OPT_DEFS += -DSENDSTRING_JIS_KEYCODE
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
diff --git a/quantum/quantum.c b/quantum/quantum.c
index 5bb7b04d5..b5acc75c3 100644
--- a/quantum/quantum.c
+++ b/quantum/quantum.c
@@ -455,103 +455,29 @@ bool process_record_quantum(keyrecord_t *record) {
   return process_action_kb(record);
 }
 
-#ifdef JIS_KEYCODE
-static const uint16_t ascii_to_shift_lut[8] PROGMEM = {
-  0x0000, /*0, 0, 0, 0, 0, 0, 0, 0,
-            0, 0, 0, 0, 0, 0, 0, 0,*/
-  0x0000, /*0, 0, 0, 0, 0, 0, 0, 0,
-            0, 0, 0, 0, 0, 0, 0, 0,*/
-  0x7ff0, /*0, 1, 1, 1, 1, 1, 1, 1,
-            1, 1, 1, 1, 0, 0, 0, 0,*/
-  0x000f, /*0, 0, 0, 0, 0, 0, 0, 0,
-            0, 0, 0, 0, 1, 1, 1, 1,*/
-  0x7fff, /*0, 1, 1, 1, 1, 1, 1, 1,
-            1, 1, 1, 1, 1, 1, 1, 1,*/
-  0xffe1, /*1, 1, 1, 1, 1, 1, 1, 1,
-            1, 1, 1, 0, 0, 0, 0, 1,*/
-  0x8000, /*1, 0, 0, 0, 0, 0, 0, 0,
-            0, 0, 0, 0, 0, 0, 0, 0,*/
-  0x001e, /*0, 0, 0, 0, 0, 0, 0, 0,
-            0, 0, 0, 1, 1, 1, 1, 0*/
-};
-
-static const struct {
-  uint8_t controls_0[16],
-          controls_1[16],
-          numerics[16],
-          alphabets_0[16],
-          alphabets_1[16];
-} lower_to_keycode PROGMEM = {
-  .controls_0 = {
+#if defined SENDSTRING_JIS_KEYCODE
+/* for users with JIS keyboards */
+const bool ascii_to_shift_lut[0x80] PROGMEM = {
     0, 0, 0, 0, 0, 0, 0, 0,
-    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0, 
-  },
-  .controls_1 = {
     0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, KC_ESC, 0, 0, 0, 0,
-  },
-  .numerics = {
-    KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
-    KC_8, KC_9, KC_QUOT, KC_SCLN, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
-  },
-  .alphabets_0 = {
-    KC_LBRC, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G,
-    KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O,
-  },
-  .alphabets_1 = {
-    KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
-    KC_X, KC_Y, KC_Z, KC_RBRC, KC_JYEN, KC_BSLS, KC_EQL, KC_RO,
-  },
-};
-static const uint8_t* ascii_to_keycode_lut[8] = {
-  lower_to_keycode.controls_0,
-  lower_to_keycode.controls_1,
-  lower_to_keycode.numerics,
-  lower_to_keycode.numerics,
-  lower_to_keycode.alphabets_0,
-  lower_to_keycode.alphabets_1,
-  lower_to_keycode.alphabets_0,
-  lower_to_keycode.alphabets_1
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 1, 1, 1, 1,
+    0, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 0, 0, 0, 0, 1,
+    1, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 1, 1, 1, 1, 0
 };
-
-void send_string(const char *str) {
-    while (1) {
-        uint8_t keycode;
-        bool shift;
-        uint8_t ascii_code = pgm_read_byte(str);
-
-        if ( ascii_code == 0x00u ){ break; }
-        else if (ascii_code == 0x20u) {
-          keycode = KC_SPC;
-          shift = false;
-        }
-        else if (ascii_code == 0x7Fu) {
-          keycode = KC_DEL;
-          shift = false;
-        }
-        else {
-          int hi = ascii_code>>4 & 0x0f,
-              lo = ascii_code & 0x0f;
-          keycode = pgm_read_byte(&ascii_to_keycode_lut[hi][lo]);
-          shift = !!( pgm_read_word(&ascii_to_shift_lut[hi]) & (0x8000u>>lo) );
-        }
-
-        if (shift) {
-            register_code(KC_LSFT);
-            register_code(keycode);
-            unregister_code(keycode);
-            unregister_code(KC_LSFT);
-        }
-        else {
-            register_code(keycode);
-            unregister_code(keycode);
-        }
-        ++str;
-    }
-}
-
 #else
-static const bool ascii_to_qwerty_shift_lut[0x80] PROGMEM = {
+/* for standard keycodes */
+const bool ascii_to_shift_lut[0x80] PROGMEM = {
     0, 0, 0, 0, 0, 0, 0, 0,
     0, 0, 0, 0, 0, 0, 0, 0,
     0, 0, 0, 0, 0, 0, 0, 0,
@@ -569,8 +495,73 @@ static const bool ascii_to_qwerty_shift_lut[0x80] PROGMEM = {
     0, 0, 0, 0, 0, 0, 0, 0,
     0, 0, 0, 1, 1, 1, 1, 0
 };
+#endif
 
-static const uint8_t ascii_to_qwerty_keycode_lut[0x80] PROGMEM = {
+#if defined SENDSTRING_JIS_KEYCODE
+/* for users with JIS keyboards */
+const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
+    0, 0, 0, 0, 0, 0, 0, 0,
+    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, KC_ESC, 0, 0, 0, 0,
+    KC_SPC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
+    KC_8, KC_9, KC_QUOT, KC_SCLN, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
+    KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
+    KC_8, KC_9, KC_QUOT, KC_SCLN, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
+    KC_LBRC, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G,
+    KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O,
+    KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
+    KC_X, KC_Y, KC_Z, KC_RBRC, KC_JYEN, KC_BSLS, KC_EQL, KC_RO,
+    KC_LBRC, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G,
+    KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O,
+    KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
+    KC_X, KC_Y, KC_Z, KC_RBRC, KC_JYEN, KC_BSLS, KC_EQL, KC_DEL,
+};
+#elif defined SENDSTRING_COLEMAK_KEYCODE
+/* for users whose OSes are set to Colemak */
+#include "keymap_colemak.h"
+const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
+    0, 0, 0, 0, 0, 0, 0, 0,
+    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, KC_ESC, 0, 0, 0, 0,
+    KC_SPC, KC_1, KC_QUOT, KC_3, KC_4, KC_5, KC_7, KC_QUOT,
+    KC_9, KC_0, KC_8, KC_EQL, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
+    KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
+    KC_8, KC_9, CM_SCLN, CM_SCLN, KC_COMM, KC_EQL, KC_DOT, KC_SLSH,
+    KC_2, CM_A, CM_B, CM_C, CM_D, CM_E, CM_F, CM_G,
+    CM_H, CM_I, CM_J, CM_K, CM_L, CM_M, CM_N, CM_O,
+    CM_P, CM_Q, CM_R, CM_S, CM_T, CM_U, CM_V, CM_W,
+    CM_X, CM_Y, CM_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_6, KC_MINS,
+    KC_GRV, CM_A, CM_B, CM_C, CM_D, CM_E, CM_F, CM_G,
+    CM_H, CM_I, CM_J, CM_K, CM_L, CM_M, CM_N, CM_O,
+    CM_P, CM_Q, CM_R, CM_S, CM_T, CM_U, CM_V, CM_W,
+    CM_X, CM_Y, CM_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL
+};
+#elif defined SENDSTRING_DVORAK_KEYCODE
+/* for users whose OSes are set to Dvorak */
+#include "keymap_dvorak.h"
+const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
+    0, 0, 0, 0, 0, 0, 0, 0,
+    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, KC_ESC, 0, 0, 0, 0,
+    KC_SPC, DV_1, DV_QUOT, DV_3, DV_4, DV_5, DV_7, DV_QUOT,
+    DV_9, DV_0, DV_8, DV_EQL, DV_COMM, DV_MINS, DV_DOT, DV_SLSH,
+    DV_0, DV_1, DV_2, DV_3, DV_4, DV_5, DV_6, DV_7,
+    DV_8, DV_9, DV_SCLN, DV_SCLN, DV_COMM, DV_EQL, DV_DOT, DV_SLSH,
+    DV_2, DV_A, DV_B, DV_C, DV_D, DV_E, DV_F, DV_G,
+    DV_H, DV_I, DV_J, DV_K, DV_L, DV_M, DV_N, DV_O,
+    DV_P, DV_Q, DV_R, DV_S, DV_T, DV_U, DV_V, DV_W,
+    DV_X, DV_Y, DV_Z, DV_LBRC, DV_BSLS, DV_RBRC, DV_6, DV_MINS,
+    DV_GRV, DV_A, DV_B, DV_C, DV_D, DV_E, DV_F, DV_G,
+    DV_H, DV_I, DV_J, DV_K, DV_L, DV_M, DV_N, DV_O,
+    DV_P, DV_Q, DV_R, DV_S, DV_T, DV_U, DV_V, DV_W,
+    DV_X, DV_Y, DV_Z, DV_LBRC, DV_BSLS, DV_RBRC, DV_GRV, KC_DEL
+};
+#else
+/* For users with default keyboard layout in OS */
+const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
     0, 0, 0, 0, 0, 0, 0, 0,
     KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
     0, 0, 0, 0, 0, 0, 0, 0,
@@ -588,14 +579,19 @@ static const uint8_t ascii_to_qwerty_keycode_lut[0x80] PROGMEM = {
     KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
     KC_X, KC_Y, KC_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL
 };
+#endif
 
 void send_string(const char *str) {
+  send_string_with_delay(str, 0);
+}
+
+void send_string_with_delay(const char *str, uint8_t interval) {
     while (1) {
         uint8_t keycode;
         uint8_t ascii_code = pgm_read_byte(str);
         if (!ascii_code) break;
-        keycode = pgm_read_byte(&ascii_to_qwerty_keycode_lut[ascii_code]);
-        if (pgm_read_byte(&ascii_to_qwerty_shift_lut[ascii_code])) {
+        keycode = pgm_read_byte(&ascii_to_keycode_lut[ascii_code]);
+        if (pgm_read_byte(&ascii_to_shift_lut[ascii_code])) {
             register_code(KC_LSFT);
             register_code(keycode);
             unregister_code(keycode);
@@ -606,55 +602,11 @@ void send_string(const char *str) {
             unregister_code(keycode);
         }
         ++str;
+        // interval
+        { uint8_t ms = interval; while (ms--) wait_ms(1); }
     }
 }
 
-#endif
-
-/* for users whose OSes are set to Colemak */
-#if 0
-#include "keymap_colemak.h"
-
-const bool ascii_to_colemak_shift_lut[0x80] PROGMEM = {
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 1, 1, 1, 1, 1, 1, 0,
-    1, 1, 1, 1, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 1, 0, 1, 0, 1, 1,
-    1, 1, 1, 1, 1, 1, 1, 1,
-    1, 1, 1, 1, 1, 1, 1, 1,
-    1, 1, 1, 1, 1, 1, 1, 1,
-    1, 1, 1, 0, 0, 0, 1, 1,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 1, 1, 1, 1, 0
-};
-
-const uint8_t ascii_to_colemak_keycode_lut[0x80] PROGMEM = {
-    0, 0, 0, 0, 0, 0, 0, 0,
-    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, KC_ESC, 0, 0, 0, 0,
-    KC_SPC, KC_1, KC_QUOT, KC_3, KC_4, KC_5, KC_7, KC_QUOT,
-    KC_9, KC_0, KC_8, KC_EQL, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
-    KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
-    KC_8, KC_9, CM_SCLN, CM_SCLN, KC_COMM, KC_EQL, KC_DOT, KC_SLSH,
-    KC_2, CM_A, CM_B, CM_C, CM_D, CM_E, CM_F, CM_G,
-    CM_H, CM_I, CM_J, CM_K, CM_L, CM_M, CM_N, CM_O,
-    CM_P, CM_Q, CM_R, CM_S, CM_T, CM_U, CM_V, CM_W,
-    CM_X, CM_Y, CM_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_6, KC_MINS,
-    KC_GRV, CM_A, CM_B, CM_C, CM_D, CM_E, CM_F, CM_G,
-    CM_H, CM_I, CM_J, CM_K, CM_L, CM_M, CM_N, CM_O,
-    CM_P, CM_Q, CM_R, CM_S, CM_T, CM_U, CM_V, CM_W,
-    CM_X, CM_Y, CM_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL
-};
-
-#endif
-
 void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
   if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
     layer_on(layer3);
diff --git a/quantum/quantum.h b/quantum/quantum.h
index 2bf18d095..1dafbf3b0 100644
--- a/quantum/quantum.h
+++ b/quantum/quantum.h
@@ -96,6 +96,7 @@ extern uint32_t default_layer_state;
 
 #define SEND_STRING(str) send_string(PSTR(str))
 void send_string(const char *str);
+void send_string_with_delay(const char *str, uint8_t interval);
 
 // For tri-layer
 void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);
-- 
cgit v1.2.3-70-g09d2


From 48ff93582ba9efbe5b8a2f7392eee822e6f25526 Mon Sep 17 00:00:00 2001
From: Shayne Holmes <shayneh@qualtrics.com>
Date: Fri, 30 Jun 2017 12:08:09 -0700
Subject: Pull out sendstring variations to their own files.

Instead of having all sendstring keycode mappings in the main quantum.c
file, give each one its own file in keymap_extras that can be #included
in a user's keymap. If one is included, it will define the appropriate
lookup tables and overwrite the weak definitions in quantum.c.
(Including more than one sendstring definition will fail at compile
time.)

Update @rai-suta's test keymap to match, as well as the documentation.
---
 docs/macros.md                             |  8 ++-
 keyboards/planck/keymaps/rai-suta/Makefile |  3 -
 keyboards/planck/keymaps/rai-suta/keymap.c |  2 +
 quantum/keymap_extras/sendstring_colemak.h | 41 ++++++++++++++
 quantum/keymap_extras/sendstring_dvorak.h  | 41 ++++++++++++++
 quantum/keymap_extras/sendstring_jis.h     | 58 +++++++++++++++++++
 quantum/quantum.c                          | 90 +-----------------------------
 quantum/quantum.h                          |  2 +
 8 files changed, 153 insertions(+), 92 deletions(-)
 create mode 100644 quantum/keymap_extras/sendstring_colemak.h
 create mode 100644 quantum/keymap_extras/sendstring_dvorak.h
 create mode 100644 quantum/keymap_extras/sendstring_jis.h

(limited to 'keyboards')

diff --git a/docs/macros.md b/docs/macros.md
index 1418d24ab..bbf51434a 100644
--- a/docs/macros.md
+++ b/docs/macros.md
@@ -41,7 +41,7 @@ A macro can include the following commands:
 
 ## Sending strings
 
-Sometimes you just want a key to type out words or phrases. For the most common situations we've provided `SEND_STRING()`, which will type out your string for you instead of having to build a `MACRO()`. Right now it assumes a US keymap with a QWERTY layout, so if you are using something else it may not behave as you expect.
+Sometimes you just want a key to type out words or phrases. For the most common situations we've provided `SEND_STRING()`, which will type out your string for you instead of having to build a `MACRO()`.
 
 For example:
 
@@ -58,6 +58,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
 };
 ```
 
+By default, it assumes a US keymap with a QWERTY layout; if you want to change that (e.g. if your OS uses software Colemak), include this somewhere in your keymap:
+
+```
+#include <sendstring_colemak.h>
+```
+
 ## Mapping a Macro to a key
 
 Use the `M()` function within your `KEYMAP()` to call a macro. For example, here is the keymap for a 2-key keyboard:
diff --git a/keyboards/planck/keymaps/rai-suta/Makefile b/keyboards/planck/keymaps/rai-suta/Makefile
index 5238d3201..38efe374c 100644
--- a/keyboards/planck/keymaps/rai-suta/Makefile
+++ b/keyboards/planck/keymaps/rai-suta/Makefile
@@ -20,9 +20,6 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-# Option defines
-OPT_DEFS += -DSENDSTRING_JIS_KEYCODE
-
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif
\ No newline at end of file
diff --git a/keyboards/planck/keymaps/rai-suta/keymap.c b/keyboards/planck/keymaps/rai-suta/keymap.c
index 13fc3677e..3206ffd35 100644
--- a/keyboards/planck/keymaps/rai-suta/keymap.c
+++ b/keyboards/planck/keymaps/rai-suta/keymap.c
@@ -3,6 +3,8 @@
 #include "planck.h"
 #include "version.h"
 
+#include "sendstring_jis.h"
+
 // Keycode defines
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
diff --git a/quantum/keymap_extras/sendstring_colemak.h b/quantum/keymap_extras/sendstring_colemak.h
new file mode 100644
index 000000000..fa9ace929
--- /dev/null
+++ b/quantum/keymap_extras/sendstring_colemak.h
@@ -0,0 +1,41 @@
+/* Copyright 2016 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+/* Sendstring definitions for the Colemak layout */
+#ifndef SENDSTRING_COLEMAK
+#define SENDSTRING_COLEMAK
+
+#include "keymap_colemak.h"
+
+const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
+    0, 0, 0, 0, 0, 0, 0, 0,
+    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, KC_ESC, 0, 0, 0, 0,
+    KC_SPC, KC_1, KC_QUOT, KC_3, KC_4, KC_5, KC_7, KC_QUOT,
+    KC_9, KC_0, KC_8, KC_EQL, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
+    KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
+    KC_8, KC_9, CM_SCLN, CM_SCLN, KC_COMM, KC_EQL, KC_DOT, KC_SLSH,
+    KC_2, CM_A, CM_B, CM_C, CM_D, CM_E, CM_F, CM_G,
+    CM_H, CM_I, CM_J, CM_K, CM_L, CM_M, CM_N, CM_O,
+    CM_P, CM_Q, CM_R, CM_S, CM_T, CM_U, CM_V, CM_W,
+    CM_X, CM_Y, CM_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_6, KC_MINS,
+    KC_GRV, CM_A, CM_B, CM_C, CM_D, CM_E, CM_F, CM_G,
+    CM_H, CM_I, CM_J, CM_K, CM_L, CM_M, CM_N, CM_O,
+    CM_P, CM_Q, CM_R, CM_S, CM_T, CM_U, CM_V, CM_W,
+    CM_X, CM_Y, CM_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL
+};
+
+#endif
diff --git a/quantum/keymap_extras/sendstring_dvorak.h b/quantum/keymap_extras/sendstring_dvorak.h
new file mode 100644
index 000000000..f5c5c818b
--- /dev/null
+++ b/quantum/keymap_extras/sendstring_dvorak.h
@@ -0,0 +1,41 @@
+/* Copyright 2016 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+/* Sendstring definitions for the Dvorak layout */
+#ifndef SENDSTRING_DVORAK
+#define SENDSTRING_DVORAK
+
+#include "keymap_dvorak.h"
+
+const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
+    0, 0, 0, 0, 0, 0, 0, 0,
+    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, KC_ESC, 0, 0, 0, 0,
+    KC_SPC, DV_1, DV_QUOT, DV_3, DV_4, DV_5, DV_7, DV_QUOT,
+    DV_9, DV_0, DV_8, DV_EQL, DV_COMM, DV_MINS, DV_DOT, DV_SLSH,
+    DV_0, DV_1, DV_2, DV_3, DV_4, DV_5, DV_6, DV_7,
+    DV_8, DV_9, DV_SCLN, DV_SCLN, DV_COMM, DV_EQL, DV_DOT, DV_SLSH,
+    DV_2, DV_A, DV_B, DV_C, DV_D, DV_E, DV_F, DV_G,
+    DV_H, DV_I, DV_J, DV_K, DV_L, DV_M, DV_N, DV_O,
+    DV_P, DV_Q, DV_R, DV_S, DV_T, DV_U, DV_V, DV_W,
+    DV_X, DV_Y, DV_Z, DV_LBRC, DV_BSLS, DV_RBRC, DV_6, DV_MINS,
+    DV_GRV, DV_A, DV_B, DV_C, DV_D, DV_E, DV_F, DV_G,
+    DV_H, DV_I, DV_J, DV_K, DV_L, DV_M, DV_N, DV_O,
+    DV_P, DV_Q, DV_R, DV_S, DV_T, DV_U, DV_V, DV_W,
+    DV_X, DV_Y, DV_Z, DV_LBRC, DV_BSLS, DV_RBRC, DV_GRV, KC_DEL
+};
+
+#endif
diff --git a/quantum/keymap_extras/sendstring_jis.h b/quantum/keymap_extras/sendstring_jis.h
new file mode 100644
index 000000000..c5a38c6a5
--- /dev/null
+++ b/quantum/keymap_extras/sendstring_jis.h
@@ -0,0 +1,58 @@
+/* Copyright 2016 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+/* Sendstring definitions for the JIS keyboard layout */
+#ifndef SENDSTRING_JIS
+#define SENDSTRING_JIS
+
+const bool ascii_to_shift_lut[0x80] PROGMEM = {
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 1, 1, 1, 1,
+    0, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 1, 1, 1, 1, 1,
+    1, 1, 1, 0, 0, 0, 0, 1,
+    1, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, 1, 1, 1, 1, 0
+};
+
+const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
+    0, 0, 0, 0, 0, 0, 0, 0,
+    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
+    0, 0, 0, 0, 0, 0, 0, 0,
+    0, 0, 0, KC_ESC, 0, 0, 0, 0,
+    KC_SPC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
+    KC_8, KC_9, KC_QUOT, KC_SCLN, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
+    KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
+    KC_8, KC_9, KC_QUOT, KC_SCLN, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
+    KC_LBRC, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G,
+    KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O,
+    KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
+    KC_X, KC_Y, KC_Z, KC_RBRC, KC_JYEN, KC_BSLS, KC_EQL, KC_RO,
+    KC_LBRC, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G,
+    KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O,
+    KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
+    KC_X, KC_Y, KC_Z, KC_RBRC, KC_JYEN, KC_BSLS, KC_EQL, KC_DEL,
+};
+
+#endif
diff --git a/quantum/quantum.c b/quantum/quantum.c
index b5acc75c3..36e586d31 100644
--- a/quantum/quantum.c
+++ b/quantum/quantum.c
@@ -455,28 +455,7 @@ bool process_record_quantum(keyrecord_t *record) {
   return process_action_kb(record);
 }
 
-#if defined SENDSTRING_JIS_KEYCODE
-/* for users with JIS keyboards */
-const bool ascii_to_shift_lut[0x80] PROGMEM = {
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 1, 1, 1, 1, 1, 1, 1,
-    1, 1, 1, 1, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 1, 1, 1, 1,
-    0, 1, 1, 1, 1, 1, 1, 1,
-    1, 1, 1, 1, 1, 1, 1, 1,
-    1, 1, 1, 1, 1, 1, 1, 1,
-    1, 1, 1, 0, 0, 0, 0, 1,
-    1, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, 1, 1, 1, 1, 0
-};
-#else
-/* for standard keycodes */
+__attribute__ ((weak))
 const bool ascii_to_shift_lut[0x80] PROGMEM = {
     0, 0, 0, 0, 0, 0, 0, 0,
     0, 0, 0, 0, 0, 0, 0, 0,
@@ -495,72 +474,8 @@ const bool ascii_to_shift_lut[0x80] PROGMEM = {
     0, 0, 0, 0, 0, 0, 0, 0,
     0, 0, 0, 1, 1, 1, 1, 0
 };
-#endif
 
-#if defined SENDSTRING_JIS_KEYCODE
-/* for users with JIS keyboards */
-const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
-    0, 0, 0, 0, 0, 0, 0, 0,
-    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, KC_ESC, 0, 0, 0, 0,
-    KC_SPC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
-    KC_8, KC_9, KC_QUOT, KC_SCLN, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
-    KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
-    KC_8, KC_9, KC_QUOT, KC_SCLN, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
-    KC_LBRC, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G,
-    KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O,
-    KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
-    KC_X, KC_Y, KC_Z, KC_RBRC, KC_JYEN, KC_BSLS, KC_EQL, KC_RO,
-    KC_LBRC, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G,
-    KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O,
-    KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
-    KC_X, KC_Y, KC_Z, KC_RBRC, KC_JYEN, KC_BSLS, KC_EQL, KC_DEL,
-};
-#elif defined SENDSTRING_COLEMAK_KEYCODE
-/* for users whose OSes are set to Colemak */
-#include "keymap_colemak.h"
-const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
-    0, 0, 0, 0, 0, 0, 0, 0,
-    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, KC_ESC, 0, 0, 0, 0,
-    KC_SPC, KC_1, KC_QUOT, KC_3, KC_4, KC_5, KC_7, KC_QUOT,
-    KC_9, KC_0, KC_8, KC_EQL, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
-    KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
-    KC_8, KC_9, CM_SCLN, CM_SCLN, KC_COMM, KC_EQL, KC_DOT, KC_SLSH,
-    KC_2, CM_A, CM_B, CM_C, CM_D, CM_E, CM_F, CM_G,
-    CM_H, CM_I, CM_J, CM_K, CM_L, CM_M, CM_N, CM_O,
-    CM_P, CM_Q, CM_R, CM_S, CM_T, CM_U, CM_V, CM_W,
-    CM_X, CM_Y, CM_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_6, KC_MINS,
-    KC_GRV, CM_A, CM_B, CM_C, CM_D, CM_E, CM_F, CM_G,
-    CM_H, CM_I, CM_J, CM_K, CM_L, CM_M, CM_N, CM_O,
-    CM_P, CM_Q, CM_R, CM_S, CM_T, CM_U, CM_V, CM_W,
-    CM_X, CM_Y, CM_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL
-};
-#elif defined SENDSTRING_DVORAK_KEYCODE
-/* for users whose OSes are set to Dvorak */
-#include "keymap_dvorak.h"
-const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
-    0, 0, 0, 0, 0, 0, 0, 0,
-    KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
-    0, 0, 0, 0, 0, 0, 0, 0,
-    0, 0, 0, KC_ESC, 0, 0, 0, 0,
-    KC_SPC, DV_1, DV_QUOT, DV_3, DV_4, DV_5, DV_7, DV_QUOT,
-    DV_9, DV_0, DV_8, DV_EQL, DV_COMM, DV_MINS, DV_DOT, DV_SLSH,
-    DV_0, DV_1, DV_2, DV_3, DV_4, DV_5, DV_6, DV_7,
-    DV_8, DV_9, DV_SCLN, DV_SCLN, DV_COMM, DV_EQL, DV_DOT, DV_SLSH,
-    DV_2, DV_A, DV_B, DV_C, DV_D, DV_E, DV_F, DV_G,
-    DV_H, DV_I, DV_J, DV_K, DV_L, DV_M, DV_N, DV_O,
-    DV_P, DV_Q, DV_R, DV_S, DV_T, DV_U, DV_V, DV_W,
-    DV_X, DV_Y, DV_Z, DV_LBRC, DV_BSLS, DV_RBRC, DV_6, DV_MINS,
-    DV_GRV, DV_A, DV_B, DV_C, DV_D, DV_E, DV_F, DV_G,
-    DV_H, DV_I, DV_J, DV_K, DV_L, DV_M, DV_N, DV_O,
-    DV_P, DV_Q, DV_R, DV_S, DV_T, DV_U, DV_V, DV_W,
-    DV_X, DV_Y, DV_Z, DV_LBRC, DV_BSLS, DV_RBRC, DV_GRV, KC_DEL
-};
-#else
-/* For users with default keyboard layout in OS */
+__attribute__ ((weak))
 const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
     0, 0, 0, 0, 0, 0, 0, 0,
     KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
@@ -579,7 +494,6 @@ const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
     KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
     KC_X, KC_Y, KC_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL
 };
-#endif
 
 void send_string(const char *str) {
   send_string_with_delay(str, 0);
diff --git a/quantum/quantum.h b/quantum/quantum.h
index 1dafbf3b0..e00fe2346 100644
--- a/quantum/quantum.h
+++ b/quantum/quantum.h
@@ -95,6 +95,8 @@ extern uint32_t default_layer_state;
 #endif
 
 #define SEND_STRING(str) send_string(PSTR(str))
+extern const bool ascii_to_shift_lut[0x80];
+extern const uint8_t ascii_to_keycode_lut[0x80];
 void send_string(const char *str);
 void send_string_with_delay(const char *str, uint8_t interval);
 
-- 
cgit v1.2.3-70-g09d2


From 41b23af60e10336fbf4b44912ece158d474a80f9 Mon Sep 17 00:00:00 2001
From: Andreas Lindhé <andreas@lindhe.io>
Date: Tue, 27 Jun 2017 20:54:11 +0200
Subject: Create custom layout based on swedish

This is a setup that is very useful for me. It may or may not be for
you. I will use it in conjunction with the A5 overlayed sv_SE layout.

The layout is subject to change (in particular I'm thinking about adding
a macro recording feature), but it have not changed much the past year
or two so you can expect it to be stable enough to learn it.

A5: http://aoeu.info/s/dvorak/svorak
My xkb map: https://github.com/lindhe/dotfiles/blob/master/usr/share/X11/xkb/symbols/se-A5

The most major points:
======================

L0:
---

* Easily accessible F11 key for fullscreening
* Print screen
* Middle mouse button for X-paste
* Improved reachability of meta buttons (LCtrl, LALt, AltGr, LGui etc.)
* Cluster Page Up/Down + Home/End by the right thumb
* Vim-like arrow layout in right bottom row

* Set media layer toggle to right thumb (Enter)
* Set apostrophe on LCtl (putting it next to some other small
  characters)

L1:
---

* Full function key layout
* Teensy button

L2:
---

* Improved media buttons layout (close by the jkl; Vim binding)
* Improved layout of emulated mouse buttons

LED behaviour to binary+CAPS
============================

The ErgoDox LEDs on this layout is using the two rightmost LEDs as the
two LSB in a two digit binary number, representing layer 0, 1, 2 and 3.
The leftmost byte/LED indicates CAPS status.
---
 keyboards/ergodox/keymaps/swedish-lindhe/keymap.c  | 199 +++++++++++++++++++++
 keyboards/ergodox/keymaps/swedish-lindhe/readme.md |  12 ++
 2 files changed, 211 insertions(+)
 create mode 100644 keyboards/ergodox/keymaps/swedish-lindhe/keymap.c
 create mode 100644 keyboards/ergodox/keymaps/swedish-lindhe/readme.md

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/swedish-lindhe/keymap.c b/keyboards/ergodox/keymaps/swedish-lindhe/keymap.c
new file mode 100644
index 000000000..9f3e82184
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swedish-lindhe/keymap.c
@@ -0,0 +1,199 @@
+/* Copyright 2017 Andreas Lindhé
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "keymap_swedish.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | Print  |   !  |  "   |  #   |  #   |  %   |      |           |Middle|   &  |  /   |  (   |  )   |  =   |  ?     |
+ * | Screen |   1  |  2 @ |  3 £ |  4 $ |  5   | F11  |           |Mouse |   6  |  7 { |  8 [ |  9 ] |  0 } |  + \   |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    | Q    | W    | E    | R    | T    | ~L1  |           |  L1  | Y    | U    | I    | O    | P    | Å      |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | CapsLk | A    | S    | D    | F    | G    |------|           |------| H    | J    | K    | L    | Ö    | Ä      |
+ * |--------+------+------+------+------+------| `    |           | Del  |------+------+------+------+------+--------|
+ * | LShft  | Z    | X    | C    | V    | B    |  '   |           |      | N    | M    | ,    | .    | -    | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LCtl |  ^   | *    | LAlt | LGui |                                       | AltGr| Down |  Up  | Left | Right|
+ *   | (')  |  " ~ | '  ´ |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,--------------.
+ *                                        | LCtl | LAlt |       | Home |   End  |
+ *                                 ,------|------|------|       |------+-------+------.
+ *                                 |      |      |  ~   |       | PgUp |       |      |
+ *                                 | Space|Back- |------|       |------|  Tab  |Enter |
+ *                                 |      |space | Esc  |       | PgDn |       | L2   |
+ *                                 `--------------------'       `---------------------'
+ */
+
+[BASE] = KEYMAP(  // layer 0 : default
+    // left hand
+    KC_PSCR,         KC_1,     KC_2,     KC_3,    KC_4,    KC_5,   KC_F11,
+    KC_TAB,          KC_Q,     KC_W,     KC_E,    KC_R,    KC_T,   MO(SYMB),
+    KC_CAPS,         KC_A,     KC_S,     KC_D,    KC_F,    KC_G,
+    KC_LSFT,         KC_Z,     KC_X,     KC_C,    KC_V,    KC_B,   NO_ACUT,
+    CTL_T(NO_APOS),  NO_CIRC,  NO_ASTR,  KC_LALT, KC_LGUI,
+                                               KC_LCTRL,  KC_LALT,
+                                                          NO_TILD,
+                                         KC_SPC, KC_BSPC, KC_ESC,
+    // right hand
+         KC_MS_BTN3,   KC_6,   KC_7,    KC_8,    KC_9,    KC_0,     NO_PLUS,
+         TG(SYMB),  KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,     NO_AA,
+                    KC_H,   KC_J,    KC_K,    KC_L,    NO_OSLH,  NO_AE,
+         KC_DELT,   KC_N,   KC_M,    KC_COMM, KC_DOT,  NO_MINS,  KC_RSFT,
+                            NO_ALGR, KC_DOWN, KC_UP,   KC_LEFT,  KC_RGHT,
+         KC_HOME,        KC_END,
+         KC_PGUP,
+         KC_PGDN, KC_TAB, LT(MDIA, KC_ENT)
+),
+
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |  /   |   *  |  -   |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |  F1  |  F2  |  F3  |  F4  |      |      |           |      |      |  7   |  8   |  9   |  +   |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |  F5  |  F6  |  F7  |  F8  |      |------|           |------|      |  4   |  5   |  6   |  +   |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |  F9  |  F10 |  F11 |  F12 |      |      |           |      |      |  1   |  2   |  3   | Enter|        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |  0   | ,    | .    | Enter|      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_TRNS,
+       KC_TRNS, KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_PSLS, KC_PAST, KC_PMNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9,    KC_PPLS, KC_TRNS,
+                KC_TRNS, KC_4,    KC_5,    KC_6,    KC_PPLS, KC_TRNS,
+       RESET,   KC_TRNS, KC_1,    KC_2,    KC_3,    KC_PENT, KC_TRNS,
+                         KC_0,    KC_COMM, KC_DOT,  KC_PENT, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      | Play | Pause| Prev | Next |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      | Lclk | Rclk |      |      |           |      |      |VolDn |VolUp | Mute |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |LeClk |RiClk |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_BTN1, KC_BTN2, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_MPLY, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS,
+                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_3_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        case 3:
+            ergodox_right_led_2_on();
+            ergodox_right_led_3_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+    if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
+        // if capslk is on, set led 1 on
+        ergodox_right_led_1_on();
+    } else {
+        ergodox_right_led_1_off();
+    }
+
+};
diff --git a/keyboards/ergodox/keymaps/swedish-lindhe/readme.md b/keyboards/ergodox/keymaps/swedish-lindhe/readme.md
new file mode 100644
index 000000000..fcd32048d
--- /dev/null
+++ b/keyboards/ergodox/keymaps/swedish-lindhe/readme.md
@@ -0,0 +1,12 @@
+# Swedish (sv_SE) Qwerty layout for ErgoDox EZ
+
+This is what I use. It's not very close to the default layout, because this is
+how I want it. Deal with it.
+
+Note that this version does not have proper bindings for the A5 symbol set yet.
+That have to be implemented in software for now.
+
+The layout image can also be found on
+[www.keyboard-layout-editor.com](http://www.keyboard-layout-editor.com/#/gists/d84bc5915707cb30a4f9f754e06ecea3)
+
+![sv_SE Qwerty A5 Lindhe](swedish-qwerty-A5_lindhe.png)
-- 
cgit v1.2.3-70-g09d2


From b228cf7ba44ea03b4b0c078c24bca7d557ceddac Mon Sep 17 00:00:00 2001
From: Andreas Lindhé <andreas@lindhe.io>
Date: Wed, 28 Jun 2017 15:05:31 +0200
Subject: Update readme

---
 keyboards/ergodox/keymaps/swedish-lindhe/readme.md | 52 +++++++++++++++++++---
 1 file changed, 45 insertions(+), 7 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/keymaps/swedish-lindhe/readme.md b/keyboards/ergodox/keymaps/swedish-lindhe/readme.md
index fcd32048d..ef62d9499 100644
--- a/keyboards/ergodox/keymaps/swedish-lindhe/readme.md
+++ b/keyboards/ergodox/keymaps/swedish-lindhe/readme.md
@@ -1,12 +1,50 @@
-# Swedish (sv_SE) Qwerty layout for ErgoDox EZ
+# swedish-lindhe ErgoDox (EZ) keymap
 
-This is what I use. It's not very close to the default layout, because this is
-how I want it. Deal with it.
+This is a setup that is very useful for me. It may or may not be for
+you. I will use it in conjunction with the A5 overlayed sv_SE layout.
 
-Note that this version does not have proper bindings for the A5 symbol set yet.
-That have to be implemented in software for now.
+The layout is subject to change (in particular I'm thinking about adding
+a macro recording feature), but it have not changed much the past year
+or two so you can expect it to be stable enough to learn it.
 
-The layout image can also be found on
+A5: http://aoeu.info/s/dvorak/svorak
+My xkb map: https://github.com/lindhe/dotfiles/blob/master/usr/share/X11/xkb/symbols/se-A5
+
+The most major points:
+======================
+
+I think the layout image can be found on
 [www.keyboard-layout-editor.com](http://www.keyboard-layout-editor.com/#/gists/d84bc5915707cb30a4f9f754e06ecea3)
 
-![sv_SE Qwerty A5 Lindhe](swedish-qwerty-A5_lindhe.png)
+L0:
+---
+
+* Easily accessible F11 key for fullscreening
+* Print screen
+* Middle mouse button for X-paste
+* Improved reachability of meta buttons (LCtrl, LALt, AltGr, LGui etc.)
+* Cluster Page Up/Down + Home/End by the right thumb
+* Vim-like arrow layout in right bottom row
+
+* Set media layer toggle to right thumb (Enter)
+* Set apostrophe on LCtl (putting it next to some other small
+  characters)
+
+L1:
+---
+
+* Full function key layout
+* Teensy button
+
+L2:
+---
+
+* Improved media buttons layout (close by the jkl; Vim binding)
+* Improved layout of emulated mouse buttons
+
+LED behaviour to binary+CAPS
+============================
+
+The ErgoDox LEDs on this layout is using the two rightmost LEDs as the
+two LSB in a two digit binary number, representing layer 0, 1, 2 and 3.
+The leftmost byte/LED indicates CAPS status.
-- 
cgit v1.2.3-70-g09d2


From 7f82275a4dfa7a470f89b65308541134e5af9909 Mon Sep 17 00:00:00 2001
From: Maarten Dekkers <maartenn2001@gmail.com>
Date: Tue, 4 Jul 2017 18:49:12 +0200
Subject: Added support for RGB on the Tada68

---
 keyboards/tada68/Makefile                  |  0
 keyboards/tada68/config.h                  | 11 ++++-------
 keyboards/tada68/keymaps/default/Makefile  |  0
 keyboards/tada68/keymaps/default/keymap.c  |  6 +++---
 keyboards/tada68/keymaps/default/readme.md |  0
 keyboards/tada68/readme.md                 |  6 +++++-
 keyboards/tada68/rules.mk                  |  0
 keyboards/tada68/tada68.c                  |  0
 keyboards/tada68/tada68.h                  |  0
 9 files changed, 12 insertions(+), 11 deletions(-)
 mode change 100644 => 100755 keyboards/tada68/Makefile
 mode change 100644 => 100755 keyboards/tada68/config.h
 mode change 100644 => 100755 keyboards/tada68/keymaps/default/Makefile
 mode change 100644 => 100755 keyboards/tada68/keymaps/default/keymap.c
 mode change 100644 => 100755 keyboards/tada68/keymaps/default/readme.md
 mode change 100644 => 100755 keyboards/tada68/readme.md
 mode change 100644 => 100755 keyboards/tada68/rules.mk
 mode change 100644 => 100755 keyboards/tada68/tada68.c
 mode change 100644 => 100755 keyboards/tada68/tada68.h

(limited to 'keyboards')

diff --git a/keyboards/tada68/Makefile b/keyboards/tada68/Makefile
old mode 100644
new mode 100755
diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h
old mode 100644
new mode 100755
index 19cf9c9b3..856509fd0
--- a/keyboards/tada68/config.h
+++ b/keyboards/tada68/config.h
@@ -66,15 +66,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Underlight configuration
  */
 
-/*#define RGB_DI_PIN E2
+#define RGB_DI_PIN F5    // See the readme for wiring your ws2812's
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 2     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17*/
-//Disabled while I figure out a suitable pin for RGB support.
-//I've tried F5, D2, D3, and E2 but it's possible the end of my
-//strand is bad. New LEDs on order.
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
 
 /*
  * Feature disable options
diff --git a/keyboards/tada68/keymaps/default/Makefile b/keyboards/tada68/keymaps/default/Makefile
old mode 100644
new mode 100755
diff --git a/keyboards/tada68/keymaps/default/keymap.c b/keyboards/tada68/keymaps/default/keymap.c
old mode 100644
new mode 100755
index f28116e0a..ef267348d
--- a/keyboards/tada68/keymaps/default/keymap.c
+++ b/keyboards/tada68/keymaps/default/keymap.c
@@ -34,18 +34,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * ,----------------------------------------------------------------.
    * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
    * |----------------------------------------------------------------|
-   * |     |   |Up |   |   |   |   |   |   |   |   |   |   |     |Hme |
+   * |     |   |Up |   |   |RGB|MOD|HU-|HU+|SA-|SA+|VA-|VA+|     |Hme |
    * |----------------------------------------------------------------|
    * |      |<- |Dn | ->|   |   |   |   |   |   |   |   |        |End |
    * |----------------------------------------------------------------|
-   * |        |   |   |Bl-|BL |BL+|   |VU-|VU+|MUT|   |MouseL|MsU|Rck |
+   * |        |   |   |Bl-|BL |BL+|   |VU-|VU+|MUT|   |   McL|MsU|McR |
    * |----------------------------------------------------------------|
    * |    |    |    |                       |   |   |    |MsL|MsD|MsR |
    * `----------------------------------------------------------------'
    */
 [_FL] = KEYMAP_ANSI(
   _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS ,  \
-  _______,_______,KC_UP, _______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,KC_HOME, \
+  _______,_______,_______,_______, KC_UP, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______,KC_HOME, \
   _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,        _______,KC_END, \
   _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \
   _______,_______,_______,                 _______,               _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R),
diff --git a/keyboards/tada68/keymaps/default/readme.md b/keyboards/tada68/keymaps/default/readme.md
old mode 100644
new mode 100755
diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md
old mode 100644
new mode 100755
index dbe2fdca1..f43befa5f
--- a/keyboards/tada68/readme.md
+++ b/keyboards/tada68/readme.md
@@ -12,4 +12,8 @@ $ make flashbin
 
 4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive.
 
-5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
\ No newline at end of file
+5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
+
+## RGB
+This board has unused pins, which means that you can add some nice RGB leds, although they have no use at this moment. Not a single transparent case has been made yet. Here's where you have to solder the wires on the PCB:
+![Image of KC60 with RGB Underglow](http://i.imgur.com/5Xmiz6Q.jpg)
\ No newline at end of file
diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk
old mode 100644
new mode 100755
diff --git a/keyboards/tada68/tada68.c b/keyboards/tada68/tada68.c
old mode 100644
new mode 100755
diff --git a/keyboards/tada68/tada68.h b/keyboards/tada68/tada68.h
old mode 100644
new mode 100755
-- 
cgit v1.2.3-70-g09d2


From c6d544bbb00f349c54cd89eb2a2fb5898d5ebdd5 Mon Sep 17 00:00:00 2001
From: Maarten Dekkers <maartenn2001@gmail.com>
Date: Tue, 4 Jul 2017 18:51:15 +0200
Subject: Fixed image description

---
 keyboards/tada68/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md
index f43befa5f..d7374d384 100755
--- a/keyboards/tada68/readme.md
+++ b/keyboards/tada68/readme.md
@@ -16,4 +16,4 @@ $ make flashbin
 
 ## RGB
 This board has unused pins, which means that you can add some nice RGB leds, although they have no use at this moment. Not a single transparent case has been made yet. Here's where you have to solder the wires on the PCB:
-![Image of KC60 with RGB Underglow](http://i.imgur.com/5Xmiz6Q.jpg)
\ No newline at end of file
+![Image of solder points for RGB on the Tada68](http://i.imgur.com/5Xmiz6Q.jpg)
\ No newline at end of file
-- 
cgit v1.2.3-70-g09d2


From 684c381aeed2709a689479d4e398e0c7dde600f6 Mon Sep 17 00:00:00 2001
From: Maarten Dekkers <maartenn2001@gmail.com>
Date: Wed, 5 Jul 2017 17:05:11 +0200
Subject: Moved RGB features to new layout

---
 keyboards/tada68/keymaps/default/keymap.c |  4 +--
 keyboards/tada68/keymaps/rgb/Makefile     | 21 +++++++++++++
 keyboards/tada68/keymaps/rgb/keymap.c     | 52 +++++++++++++++++++++++++++++++
 keyboards/tada68/keymaps/rgb/readme.md    |  3 ++
 keyboards/tada68/readme.md                |  6 +---
 5 files changed, 79 insertions(+), 7 deletions(-)
 create mode 100755 keyboards/tada68/keymaps/rgb/Makefile
 create mode 100755 keyboards/tada68/keymaps/rgb/keymap.c
 create mode 100755 keyboards/tada68/keymaps/rgb/readme.md

(limited to 'keyboards')

diff --git a/keyboards/tada68/keymaps/default/keymap.c b/keyboards/tada68/keymaps/default/keymap.c
index ef267348d..d6cba7e1c 100755
--- a/keyboards/tada68/keymaps/default/keymap.c
+++ b/keyboards/tada68/keymaps/default/keymap.c
@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * ,----------------------------------------------------------------.
    * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
    * |----------------------------------------------------------------|
-   * |     |   |Up |   |   |RGB|MOD|HU-|HU+|SA-|SA+|VA-|VA+|     |Hme |
+   * |     |   |Up |   |   |   |   |   |   |   |   |   |   |     |Hme |
    * |----------------------------------------------------------------|
    * |      |<- |Dn | ->|   |   |   |   |   |   |   |   |        |End |
    * |----------------------------------------------------------------|
@@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
 [_FL] = KEYMAP_ANSI(
   _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS ,  \
-  _______,_______,_______,_______, KC_UP, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______,KC_HOME, \
+  _______,_______,_______,_______, KC_UP, _______,_______,_______,_______,_______,_______,_______,_______, _______,KC_HOME, \
   _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,        _______,KC_END, \
   _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \
   _______,_______,_______,                 _______,               _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R),
diff --git a/keyboards/tada68/keymaps/rgb/Makefile b/keyboards/tada68/keymaps/rgb/Makefile
new file mode 100755
index 000000000..ee94a67b4
--- /dev/null
+++ b/keyboards/tada68/keymaps/rgb/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/tada68/keymaps/rgb/keymap.c b/keyboards/tada68/keymaps/rgb/keymap.c
new file mode 100755
index 000000000..ef267348d
--- /dev/null
+++ b/keyboards/tada68/keymaps/rgb/keymap.c
@@ -0,0 +1,52 @@
+#include "tada68.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,----------------------------------------------------------------.
+   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |~ ` |
+   * |----------------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |Del |
+   * |----------------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |----------------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt| FN|Ctrl|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[_BL] = KEYMAP_ANSI(
+  KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC,KC_GRV, \
+  KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS,KC_DEL, \
+  KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,KC_PGUP,  \
+  KC_LSFT,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,   KC_RSFT,KC_UP,KC_PGDN, \
+  KC_LCTL, KC_LGUI,KC_LALT,                KC_SPC,                        KC_RALT,MO(_FL),KC_RCTRL, KC_LEFT,KC_DOWN,KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   * ,----------------------------------------------------------------.
+   * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del    |Ins |
+   * |----------------------------------------------------------------|
+   * |     |   |Up |   |   |RGB|MOD|HU-|HU+|SA-|SA+|VA-|VA+|     |Hme |
+   * |----------------------------------------------------------------|
+   * |      |<- |Dn | ->|   |   |   |   |   |   |   |   |        |End |
+   * |----------------------------------------------------------------|
+   * |        |   |   |Bl-|BL |BL+|   |VU-|VU+|MUT|   |   McL|MsU|McR |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |MsL|MsD|MsR |
+   * `----------------------------------------------------------------'
+   */
+[_FL] = KEYMAP_ANSI(
+  _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS ,  \
+  _______,_______,_______,_______, KC_UP, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______,KC_HOME, \
+  _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,        _______,KC_END, \
+  _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \
+  _______,_______,_______,                 _______,               _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R),
+};
diff --git a/keyboards/tada68/keymaps/rgb/readme.md b/keyboards/tada68/keymaps/rgb/readme.md
new file mode 100755
index 000000000..fb5a5abd0
--- /dev/null
+++ b/keyboards/tada68/keymaps/rgb/readme.md
@@ -0,0 +1,3 @@
+# RGB on the TADA68
+This board has unused pins, which means that you can add some nice RGB leds, although they have no use at this momen because not a single transparent case has been made yet. Here's where you have to solder the wires on the PCB:
+![Image of solder points for RGB on the Tada68](http://i.imgur.com/5Xmiz6Q.jpg)
\ No newline at end of file
diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md
index d7374d384..dbe2fdca1 100755
--- a/keyboards/tada68/readme.md
+++ b/keyboards/tada68/readme.md
@@ -12,8 +12,4 @@ $ make flashbin
 
 4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive.
 
-5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
-
-## RGB
-This board has unused pins, which means that you can add some nice RGB leds, although they have no use at this moment. Not a single transparent case has been made yet. Here's where you have to solder the wires on the PCB:
-![Image of solder points for RGB on the Tada68](http://i.imgur.com/5Xmiz6Q.jpg)
\ No newline at end of file
+5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
\ No newline at end of file
-- 
cgit v1.2.3-70-g09d2


From 58139f87e456686eb8765a789ddc8aae9c7c99ce Mon Sep 17 00:00:00 2001
From: Maarten Dekkers <maartenn2001@gmail.com>
Date: Wed, 5 Jul 2017 17:43:05 +0200
Subject: Fixed arrow up and rgb config

---
 keyboards/tada68/config.h                 | 10 ----------
 keyboards/tada68/keymaps/default/keymap.c |  2 +-
 keyboards/tada68/keymaps/rgb/config.h     |  9 +++++++++
 keyboards/tada68/keymaps/rgb/keymap.c     |  2 +-
 4 files changed, 11 insertions(+), 12 deletions(-)
 create mode 100755 keyboards/tada68/keymaps/rgb/config.h

(limited to 'keyboards')

diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h
index 856509fd0..3e011bc75 100755
--- a/keyboards/tada68/config.h
+++ b/keyboards/tada68/config.h
@@ -63,16 +63,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define BACKLIGHT_LEVELS 4
 
-/* Underlight configuration
- */
-
-#define RGB_DI_PIN F5    // See the readme for wiring your ws2812's
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 2     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/tada68/keymaps/default/keymap.c b/keyboards/tada68/keymaps/default/keymap.c
index d6cba7e1c..8e7cbdaf2 100755
--- a/keyboards/tada68/keymaps/default/keymap.c
+++ b/keyboards/tada68/keymaps/default/keymap.c
@@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
 [_FL] = KEYMAP_ANSI(
   _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS ,  \
-  _______,_______,_______,_______, KC_UP, _______,_______,_______,_______,_______,_______,_______,_______, _______,KC_HOME, \
+  _______,_______, KC_UP,_______,_______, _______,_______,_______,_______,_______,_______,_______,_______, _______,KC_HOME, \
   _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,        _______,KC_END, \
   _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \
   _______,_______,_______,                 _______,               _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R),
diff --git a/keyboards/tada68/keymaps/rgb/config.h b/keyboards/tada68/keymaps/rgb/config.h
new file mode 100755
index 000000000..5dcdad12e
--- /dev/null
+++ b/keyboards/tada68/keymaps/rgb/config.h
@@ -0,0 +1,9 @@
+#include "../../config.h"
+
+/* WS2812B RGB Underglow LED */
+#define RGB_DI_PIN F5   // See readme.md for wiring your led's
+#define RGBLIGHT_ANIMATIONS       
+#define RGBLED_NUM 16         // Number of LEDs. Change this to match your use case.
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
\ No newline at end of file
diff --git a/keyboards/tada68/keymaps/rgb/keymap.c b/keyboards/tada68/keymaps/rgb/keymap.c
index ef267348d..4634e5e3a 100755
--- a/keyboards/tada68/keymaps/rgb/keymap.c
+++ b/keyboards/tada68/keymaps/rgb/keymap.c
@@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
 [_FL] = KEYMAP_ANSI(
   _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS ,  \
-  _______,_______,_______,_______, KC_UP, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______,KC_HOME, \
+  _______,_______,KC_UP,_______,_______,  RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______,KC_HOME, \
   _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,        _______,KC_END, \
   _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,KC_BTN1, KC_MS_U, KC_BTN2, \
   _______,_______,_______,                 _______,               _______,_______,_______,KC_MS_L,KC_MS_D, KC_MS_R),
-- 
cgit v1.2.3-70-g09d2


From 7bddacf25fcd7085968d10d6df9f55620b256a89 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Fri, 7 Jul 2017 13:32:29 -0400
Subject: update lets_split lufa include

---
 keyboards/lets_split/keymaps/OLED_sample/keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
index 274f917e2..59b700eee 100644
--- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c
+++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
@@ -2,7 +2,7 @@
 #include "bootloader.h"
 #include "action_layer.h"
 #include "eeconfig.h"
-#include "tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/Peripheral/TWI.h"
+#include "lib/lufa/LUFA/Drivers/Peripheral/TWI.h"
 #ifdef AUDIO_ENABLE
   #include "audio.h"
 #endif
-- 
cgit v1.2.3-70-g09d2


From 1c26468ad5a0701e244c99cbcbc547c93b75d515 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Fri, 7 Jul 2017 14:53:47 -0400
Subject: update include

---
 keyboards/lets_split/keymaps/OLED_sample/keymap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
index 59b700eee..5dbab5332 100644
--- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c
+++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
@@ -2,7 +2,7 @@
 #include "bootloader.h"
 #include "action_layer.h"
 #include "eeconfig.h"
-#include "lib/lufa/LUFA/Drivers/Peripheral/TWI.h"
+#include "LUFA/Drivers/Peripheral/TWI.h"
 #ifdef AUDIO_ENABLE
   #include "audio.h"
 #endif
-- 
cgit v1.2.3-70-g09d2


From 53174036e9d8aabe01d1e7fcca7580edf3ee1178 Mon Sep 17 00:00:00 2001
From: Ethan Spitz <ethan.spitz@gmail.com>
Date: Thu, 6 Jul 2017 22:03:31 -0700
Subject: Add new keymap to try to get pretty close to the default layout for
 an ergodox keyboard. Coming from that I really like being able to use the
 backspace from my left thumb.

---
 keyboards/lets_split/keymaps/ergodoxish/Makefile |   3 +
 keyboards/lets_split/keymaps/ergodoxish/config.h |  37 ++++
 keyboards/lets_split/keymaps/ergodoxish/keymap.c | 214 +++++++++++++++++++++++
 3 files changed, 254 insertions(+)
 create mode 100644 keyboards/lets_split/keymaps/ergodoxish/Makefile
 create mode 100644 keyboards/lets_split/keymaps/ergodoxish/config.h
 create mode 100644 keyboards/lets_split/keymaps/ergodoxish/keymap.c

(limited to 'keyboards')

diff --git a/keyboards/lets_split/keymaps/ergodoxish/Makefile b/keyboards/lets_split/keymaps/ergodoxish/Makefile
new file mode 100644
index 000000000..457a3d01d
--- /dev/null
+++ b/keyboards/lets_split/keymaps/ergodoxish/Makefile
@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/lets_split/keymaps/ergodoxish/config.h b/keyboards/lets_split/keymaps/ergodoxish/config.h
new file mode 100644
index 000000000..7f33a4363
--- /dev/null
+++ b/keyboards/lets_split/keymaps/ergodoxish/config.h
@@ -0,0 +1,37 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#endif
\ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/ergodoxish/keymap.c b/keyboards/lets_split/keymaps/ergodoxish/keymap.c
new file mode 100644
index 000000000..936312b2e
--- /dev/null
+++ b/keyboards/lets_split/keymaps/ergodoxish/keymap.c
@@ -0,0 +1,214 @@
+#include "lets_split.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  KEYMAP( \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
-- 
cgit v1.2.3-70-g09d2


From 68cf0d454c66095ac8ed8bbada1bf6c2822ec8b8 Mon Sep 17 00:00:00 2001
From: Maarten Dekkers <maartenn2001@gmail.com>
Date: Fri, 7 Jul 2017 20:54:06 +0200
Subject: Own keymap layout

---
 keyboards/tada68/keymaps/maartenwut/Makefile  |  22 ++
 keyboards/tada68/keymaps/maartenwut/keymap.c  | 383 ++++++++++++++++++++++++++
 keyboards/tada68/keymaps/maartenwut/readme.md |   3 +
 3 files changed, 408 insertions(+)
 create mode 100755 keyboards/tada68/keymaps/maartenwut/Makefile
 create mode 100755 keyboards/tada68/keymaps/maartenwut/keymap.c
 create mode 100755 keyboards/tada68/keymaps/maartenwut/readme.md

(limited to 'keyboards')

diff --git a/keyboards/tada68/keymaps/maartenwut/Makefile b/keyboards/tada68/keymaps/maartenwut/Makefile
new file mode 100755
index 000000000..79ec2f5b8
--- /dev/null
+++ b/keyboards/tada68/keymaps/maartenwut/Makefile
@@ -0,0 +1,22 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        	# Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes		# Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes		# Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+COMBO_ENABLE = no 			# Enable key combinations
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/tada68/keymaps/maartenwut/keymap.c b/keyboards/tada68/keymaps/maartenwut/keymap.c
new file mode 100755
index 000000000..b2edb6adc
--- /dev/null
+++ b/keyboards/tada68/keymaps/maartenwut/keymap.c
@@ -0,0 +1,383 @@
+#include "maarten68.h"
+#include "action_layer.h"
+#include "timer.h"
+#include "bootloader.h"
+#include "command.h"
+
+#define _MA 0
+#define _FL 1
+#define _AR 2
+#define _LO 3
+#define _UL 4
+
+#define TRNS KC_TRNS
+#define trigger_time 400
+
+#define T1 M(1)
+#define T2 M(2)
+#define T3 M(3)
+#define T4 M(4)
+#define T5 M(5)
+#define T6 M(6)
+#define T7 M(7)
+#define T8 M(8)
+#define T9 M(9)
+#define T10 M(10)
+#define T11 M(11)
+#define T12 M(12)
+#define END_HOME M(0)
+#define LSHIFT OSM(MOD_LSFT)
+#define SPACE LT(_AR, KC_SPC)
+
+static uint16_t key_timer;
+
+enum emoticons {
+	LENNY = SAFE_RANGE,
+	DWNHRT,
+	SHRUG
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _MA: Main Layer, Default
+   * ,----------------------------------------------------------------.
+   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |P/P |
+   * |----------------------------------------------------------------| 
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |Del |
+   * |----------------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |----------------------------------------------------------------|
+   * |Shft|End|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt|Ctrl| FN|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[_MA] = KEYMAP_ANSI(
+  KC_ESC,	T1, 		T2, 		T3, 		T4, 		T5, 		T6, 		T7, 		T8, 		T9, 		T10, 		T11, 		T12,		KC_BSPC,	KC_MPLY, \
+  KC_TAB,	KC_Q, 		KC_W, 		KC_E, 		KC_R, 		KC_T, 		KC_Y, 		KC_U, 		KC_I,  		KC_O,  		KC_P, 		KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_DEL, \
+  KC_CAPS,	KC_A, 		KC_S,   	KC_D, 		KC_F, 		KC_G, 		KC_H, 		KC_J, 		KC_K,  		KC_L,  		KC_SCLN, 	KC_QUOT,  	KC_ENT,		KC_PGUP, \
+  LSHIFT, 	END_HOME,	KC_Z, 		KC_X,   	KC_C, 		KC_V, 		KC_B, 		KC_N, 		KC_M, 		KC_COMM, 	KC_DOT,		KC_SLSH, 	KC_RSFT,    KC_UP,		KC_PGDN, \
+  KC_LCTL, 	KC_LGUI, 	KC_LALT,	SPACE,		KC_RALT,	KC_RCTRL, 	MO(_FL),	KC_LEFT, 	KC_DOWN, 	KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   * ,----------------------------------------------------------------.
+   * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|       |Prsc|
+   * |----------------------------------------------------------------|
+   * |     |MbL|MsU|MbR|   |   |   |   |   |   |   |   |   |     |_LO |
+   * |----------------------------------------------------------------|
+   * |      |MsL|MsD|MsR|   |   |   |   |   |   |   |   |        |Hme |
+   * |----------------------------------------------------------------|
+   * |    |Gam|   |   |   |   |   |   |   |   |   |   |      |MwU|End |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |MwL|MwD|MwR |  
+   * `----------------------------------------------------------------'
+   */
+[_FL] = KEYMAP_ANSI(
+  KC_GRV,	KC_F1,		KC_F2,  	KC_F3,  	KC_F4,  	KC_F5,		KC_F6,		KC_F7, 		KC_F8,		KC_F9,		KC_F10,  	KC_F11,		KC_F12,		TRNS,		KC_PSCR, \
+  TRNS, 	KC_BTN1,	KC_MS_U,  	KC_BTN2, 	TRNS, 		TRNS, 		TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		TRNS,		TO(_LO), \
+  TRNS, 	KC_MS_L,	KC_MS_D, 	KC_MS_R,	TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		KC_HOME, \
+  TRNS, 	TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		KC_VOLD,	KC_VOLU,	KC_MUTE,	TRNS,		KC_WH_U,	KC_END, \
+  TRNS, 	TRNS, 		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,   	KC_WH_L,	KC_WH_D, 	KC_WH_R),
+
+  /* Keymap _AR: Arrow keys layer
+   * ,----------------------------------------------------------------.
+   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |P/P |
+   * |----------------------------------------------------------------| 
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |Del |
+   * |----------------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |----------------------------------------------------------------|
+   * |Shft|End|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt|Ctrl| FN|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[_AR] = KEYMAP_ANSI(
+  TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,	TRNS, \
+  LENNY,	TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,  		TRNS,  		TRNS, 		TRNS,		TRNS,		TRNS,	TRNS, \
+  DWNHRT,	TRNS, 		TRNS,   	TRNS, 		TRNS, 		TRNS, 		KC_LEFT, 	KC_DOWN, 	KC_UP,  	KC_RGHT,  	TRNS, 		TRNS, 	 	TRNS,		TRNS, \
+  SHRUG, 	RGB_TOG,    RGB_MOD,	RGB_HUI,	RGB_HUD,	RGB_SAI, 	RGB_SAD, 	RGB_VAI, 	RGB_VAD, 	TRNS, 		TRNS,		TRNS, 		TRNS,   	 TRNS,	TRNS, \
+  TRNS, 	TRNS, 		TRNS,		TRNS,		TRNS,		TRNS, 		TRNS,		TRNS, 		TRNS, 		TRNS),
+
+  /* Keymap _UL: Unlock layer
+   * ,----------------------------------------------------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |       |    |
+   * |----------------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |_MA |
+   * |----------------------------------------------------------------|
+   * |      |   |   |   |   |   |   |   |   |   |   |   |        |    |
+   * |----------------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |      |   |    |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |   |   |    |
+   * `----------------------------------------------------------------'
+   */
+[_UL] = KEYMAP_ANSI(
+  KC_NO,	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
+  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO,  	KC_NO, 		TO(_MA), \
+  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
+  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
+  KC_NO, 	KC_NO, 		KC_NO,    	KC_NO,		KC_NO, 		KC_NO, 		TRNS, 		KC_NO, 		KC_NO, 		KC_NO),
+
+  /* Keymap _LO: Lock layer
+   * ,----------------------------------------------------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |       |    |
+   * |----------------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |    |
+   * |----------------------------------------------------------------|
+   * |      |   |   |   |   |   |   |   |   |   |   |   |        |    |
+   * |----------------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |      |   |    |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                      |   |   | _UL |   |   |    |
+   * `----------------------------------------------------------------'
+   */
+[_LO] = KEYMAP_ANSI(
+  KC_NO,	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
+  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, \
+  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
+  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
+  KC_NO, 	KC_NO, 		KC_NO,    	KC_NO,		KC_NO, 		KC_NO, 		MO(_UL), 	KC_NO, 		KC_NO, 		KC_NO),
+};
+
+void tap(uint16_t keycode){
+    register_code(keycode);
+    unregister_code(keycode);
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	switch (keycode) {
+		case LENNY:			// ( ͡° ͜ʖ ͡°)
+			if(record->event.pressed){
+				set_unicode_input_mode(UC_WIN);
+				register_code(KC_LSFT);
+				tap(KC_9);										// Head
+				unregister_code(KC_LSFT);
+				tap(KC_SPC);									// Space
+				process_unicode((0x0361|QK_UNICODE), record);	// Eyebrow
+				process_unicode((0x00B0|QK_UNICODE), record);	// Eye
+				tap(KC_SPC);
+				process_unicode((0x035C|QK_UNICODE), record);	// Mouth
+				process_unicode((0x0296|QK_UNICODE), record);	// Nose
+				tap(KC_SPC);
+				process_unicode((0x0361|QK_UNICODE), record);	// Eyebrow
+				process_unicode((0x00B0|QK_UNICODE), record);	// Eye
+				register_code(KC_LSFT);
+				tap(KC_0);										// Head
+				unregister_code(KC_LSFT);
+			}
+			return false;
+			break;
+		case DWNHRT:		// (´・ω・`)
+			if(record->event.pressed){
+				set_unicode_input_mode(UC_WIN);
+				register_code(KC_LSFT);
+				tap(KC_9);										// Head
+				unregister_code(KC_LSFT);
+				process_unicode((0x00B4|QK_UNICODE), record);	// Eyebrow
+				process_unicode((0x30FB|QK_UNICODE), record);	// Eye
+				process_unicode((0x03C9|QK_UNICODE), record);	// Mouth
+				process_unicode((0x30FB|QK_UNICODE), record);	// Eye
+				process_unicode((0x0060|QK_UNICODE), record);	// Eyebrow
+				register_code(KC_LSFT);
+				tap(KC_0);										// Head
+				unregister_code(KC_LSFT);
+			}
+			return false;
+			break;
+		case SHRUG:			// ¯\_(ツ)_/¯
+			if(record->event.pressed){
+				set_unicode_input_mode(UC_WIN);
+				process_unicode((0x00AF|QK_UNICODE), record);	// Hand
+				tap(KC_BSLS);									// Arm
+				register_code(KC_LSFT);
+				tap(KC_UNDS);									// Arm
+				tap(KC_LPRN);									// Head
+				unregister_code(KC_LSFT);
+				process_unicode((0x30C4|QK_UNICODE), record);	// Face
+				register_code(KC_LSFT);
+				tap(KC_RPRN);									// Head
+				tap(KC_UNDS);									// Arm
+				unregister_code(KC_LSFT);
+				tap(KC_SLSH);									// Arm
+				process_unicode((0x00AF|QK_UNICODE), record);	// Hand
+			}
+			return false;
+			break;
+	}
+	return true;
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+    switch (id) {
+		case 0:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else {
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(END), END );
+				}
+				else {
+					return MACRO( T(HOME), END );
+				}
+			}
+			break;
+		case 1:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F1), END );
+				}
+				else {
+					return MACRO( T(1), END );
+				}
+			}
+			break;
+		case 2:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F2), END );
+				}
+				else {
+					return MACRO( T(2), END );
+				}
+			}
+			break;
+		case 3:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F3), END );
+				}
+				else {
+					return MACRO( T(3), END );
+				}
+			}
+			break;
+		case 4:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F4), END );
+				}
+				else {
+					return MACRO( T(4), END );
+				}
+			}
+			break;
+		case 5:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F5), END );
+				}
+				else {
+					return MACRO( T(5), END );
+				}
+			}
+			break;
+		case 6:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F6), END );
+				}
+				else {
+					return MACRO( T(6), END );
+				}
+			}
+			break;
+		case 7:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F7), END );
+				}
+				else {
+					return MACRO( T(7), END );
+				}
+			}
+			break;
+		case 8:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F8), END );
+				}
+				else {
+					return MACRO( T(8), END );
+				}
+			}
+			break;
+		case 9:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F9), END );
+				}
+				else {
+					return MACRO( T(9), END );
+				}
+			}
+			break;
+		case 10:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F10), END );
+				}
+				else {
+					return MACRO( T(0), END );
+				}
+			}
+			break;
+		case 11:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F11), END );
+				}
+				else {
+					return MACRO( T(MINS), END );
+				}
+			}
+			break;
+		case 12:
+			if (record->event.pressed) {
+				key_timer = timer_read();
+			}
+			else { 
+				if (timer_elapsed(key_timer) > trigger_time) {
+					return MACRO( T(F12), END );
+				}
+				else {
+					return MACRO( T(EQL), END );
+				}
+			}
+			break;
+	}
+    return MACRO_NONE;
+};
\ No newline at end of file
diff --git a/keyboards/tada68/keymaps/maartenwut/readme.md b/keyboards/tada68/keymaps/maartenwut/readme.md
new file mode 100755
index 000000000..9194fbe3c
--- /dev/null
+++ b/keyboards/tada68/keymaps/maartenwut/readme.md
@@ -0,0 +1,3 @@
+# Maartenwut's layout
+
+Well, this is my keyboard layout.
-- 
cgit v1.2.3-70-g09d2


From 53acc7b0748d9e04346a734baf0207b2ac1251ce Mon Sep 17 00:00:00 2001
From: Maarten Dekkers <maartenn2001@gmail.com>
Date: Fri, 7 Jul 2017 21:11:12 +0200
Subject: Cleaned and corrected keymap code

---
 keyboards/tada68/keymaps/maartenwut/config.h |  9 ++++++
 keyboards/tada68/keymaps/maartenwut/keymap.c | 48 ++++++++++++++--------------
 keyboards/tada68/keymaps/maartenwut/tada68.h | 43 +++++++++++++++++++++++++
 3 files changed, 76 insertions(+), 24 deletions(-)
 create mode 100755 keyboards/tada68/keymaps/maartenwut/config.h
 create mode 100755 keyboards/tada68/keymaps/maartenwut/tada68.h

(limited to 'keyboards')

diff --git a/keyboards/tada68/keymaps/maartenwut/config.h b/keyboards/tada68/keymaps/maartenwut/config.h
new file mode 100755
index 000000000..5dcdad12e
--- /dev/null
+++ b/keyboards/tada68/keymaps/maartenwut/config.h
@@ -0,0 +1,9 @@
+#include "../../config.h"
+
+/* WS2812B RGB Underglow LED */
+#define RGB_DI_PIN F5   // See readme.md for wiring your led's
+#define RGBLIGHT_ANIMATIONS       
+#define RGBLED_NUM 16         // Number of LEDs. Change this to match your use case.
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
\ No newline at end of file
diff --git a/keyboards/tada68/keymaps/maartenwut/keymap.c b/keyboards/tada68/keymaps/maartenwut/keymap.c
index b2edb6adc..b95305a57 100755
--- a/keyboards/tada68/keymaps/maartenwut/keymap.c
+++ b/keyboards/tada68/keymaps/maartenwut/keymap.c
@@ -1,4 +1,4 @@
-#include "maarten68.h"
+#include "tada68.h"
 #include "action_layer.h"
 #include "timer.h"
 #include "bootloader.h"
@@ -54,9 +54,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_MA] = KEYMAP_ANSI(
   KC_ESC,	T1, 		T2, 		T3, 		T4, 		T5, 		T6, 		T7, 		T8, 		T9, 		T10, 		T11, 		T12,		KC_BSPC,	KC_MPLY, \
   KC_TAB,	KC_Q, 		KC_W, 		KC_E, 		KC_R, 		KC_T, 		KC_Y, 		KC_U, 		KC_I,  		KC_O,  		KC_P, 		KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_DEL, \
-  KC_CAPS,	KC_A, 		KC_S,   	KC_D, 		KC_F, 		KC_G, 		KC_H, 		KC_J, 		KC_K,  		KC_L,  		KC_SCLN, 	KC_QUOT,  	KC_ENT,		KC_PGUP, \
+  KC_CAPS,	KC_A, 		KC_S,   	KC_D, 		KC_F, 		KC_G, 		KC_H, 		KC_J, 		KC_K,  		KC_L,  		KC_SCLN, 	KC_QUOT,  				KC_ENT,		KC_PGUP, \
   LSHIFT, 	END_HOME,	KC_Z, 		KC_X,   	KC_C, 		KC_V, 		KC_B, 		KC_N, 		KC_M, 		KC_COMM, 	KC_DOT,		KC_SLSH, 	KC_RSFT,    KC_UP,		KC_PGDN, \
-  KC_LCTL, 	KC_LGUI, 	KC_LALT,	SPACE,		KC_RALT,	KC_RCTRL, 	MO(_FL),	KC_LEFT, 	KC_DOWN, 	KC_RGHT),
+  KC_LCTL, 	KC_LGUI, 	KC_LALT,							SPACE,											KC_RALT,	KC_RCTRL, 	MO(_FL),	KC_LEFT, 	KC_DOWN, 	KC_RGHT),
 
   /* Keymap _FL: Function Layer
    * ,----------------------------------------------------------------.
@@ -66,7 +66,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |----------------------------------------------------------------|
    * |      |MsL|MsD|MsR|   |   |   |   |   |   |   |   |        |Hme |
    * |----------------------------------------------------------------|
-   * |    |Gam|   |   |   |   |   |   |   |   |   |   |      |MwU|End |
+   * |    |   |   |   |   |   |   |   |   |   |   |   |      |MwU|End |
    * |----------------------------------------------------------------|
    * |    |    |    |                       |   |   |    |MwL|MwD|MwR |  
    * `----------------------------------------------------------------'
@@ -74,29 +74,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_FL] = KEYMAP_ANSI(
   KC_GRV,	KC_F1,		KC_F2,  	KC_F3,  	KC_F4,  	KC_F5,		KC_F6,		KC_F7, 		KC_F8,		KC_F9,		KC_F10,  	KC_F11,		KC_F12,		TRNS,		KC_PSCR, \
   TRNS, 	KC_BTN1,	KC_MS_U,  	KC_BTN2, 	TRNS, 		TRNS, 		TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		TRNS,		TO(_LO), \
-  TRNS, 	KC_MS_L,	KC_MS_D, 	KC_MS_R,	TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		KC_HOME, \
+  TRNS, 	KC_MS_L,	KC_MS_D, 	KC_MS_R,	TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,					TRNS,		KC_HOME, \
   TRNS, 	TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		KC_VOLD,	KC_VOLU,	KC_MUTE,	TRNS,		KC_WH_U,	KC_END, \
-  TRNS, 	TRNS, 		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,   	KC_WH_L,	KC_WH_D, 	KC_WH_R),
+  TRNS, 	TRNS, 		TRNS,								TRNS,											TRNS,		TRNS,		TRNS,   	KC_WH_L,	KC_WH_D, 	KC_WH_R),
 
-  /* Keymap _AR: Arrow keys layer
+  /* Keymap _UL: Unlock layer
    * ,----------------------------------------------------------------.
-   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |P/P |
-   * |----------------------------------------------------------------| 
-   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |Del |
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |       |    |
    * |----------------------------------------------------------------|
-   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |_MA |
    * |----------------------------------------------------------------|
-   * |Shft|End|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+   * |      |   |   |   |   |   |Lft|Dwn| Up|Rgt|   |   |        |    |
    * |----------------------------------------------------------------|
-   * |Ctrl|Win |Alt |        Space          |Alt|Ctrl| FN|Lef|Dow|Rig |
+   * |    |   |   |   |   |   |   |   |   |   |   |   |      |   |    |
+   * |----------------------------------------------------------------|
+   * |    |    |    |                       |   |   |    |   |   |    |
    * `----------------------------------------------------------------'
    */
 [_AR] = KEYMAP_ANSI(
-  TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,	TRNS, \
-  LENNY,	TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,  		TRNS,  		TRNS, 		TRNS,		TRNS,		TRNS,	TRNS, \
-  DWNHRT,	TRNS, 		TRNS,   	TRNS, 		TRNS, 		TRNS, 		KC_LEFT, 	KC_DOWN, 	KC_UP,  	KC_RGHT,  	TRNS, 		TRNS, 	 	TRNS,		TRNS, \
-  SHRUG, 	RGB_TOG,    RGB_MOD,	RGB_HUI,	RGB_HUD,	RGB_SAI, 	RGB_SAD, 	RGB_VAI, 	RGB_VAD, 	TRNS, 		TRNS,		TRNS, 		TRNS,   	 TRNS,	TRNS, \
-  TRNS, 	TRNS, 		TRNS,		TRNS,		TRNS,		TRNS, 		TRNS,		TRNS, 		TRNS, 		TRNS),
+  TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		TRNS, \
+  LENNY,	TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,  		TRNS,  		TRNS, 		TRNS,		TRNS,		TRNS,		TRNS, \
+  DWNHRT,	TRNS, 		TRNS,   	TRNS, 		TRNS, 		TRNS, 		KC_LEFT, 	KC_DOWN, 	KC_UP,  	KC_RGHT,  	TRNS, 		TRNS, 	 				TRNS,		TRNS, \
+  SHRUG, 	RGB_TOG,    RGB_MOD,	RGB_HUI,	RGB_HUD,	RGB_SAI, 	RGB_SAD, 	RGB_VAI, 	RGB_VAD, 	TRNS, 		TRNS,		TRNS, 		TRNS,   	TRNS,		TRNS, \
+  TRNS, 	TRNS, 		TRNS,								TRNS,											TRNS,		TRNS, 		TRNS,		TRNS, 		TRNS, 		TRNS),
 
   /* Keymap _UL: Unlock layer
    * ,----------------------------------------------------------------.
@@ -106,7 +106,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |----------------------------------------------------------------|
    * |      |   |   |   |   |   |   |   |   |   |   |   |        |    |
    * |----------------------------------------------------------------|
-   * |        |   |   |   |   |   |   |   |   |   |   |      |   |    |
+   * |    |   |   |   |   |   |   |   |   |   |   |   |      |   |    |
    * |----------------------------------------------------------------|
    * |    |    |    |                       |   |   |    |   |   |    |
    * `----------------------------------------------------------------'
@@ -114,9 +114,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_UL] = KEYMAP_ANSI(
   KC_NO,	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
   KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO,  	KC_NO, 		TO(_MA), \
-  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
+  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 					KC_NO, 		KC_NO, \
   KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
-  KC_NO, 	KC_NO, 		KC_NO,    	KC_NO,		KC_NO, 		KC_NO, 		TRNS, 		KC_NO, 		KC_NO, 		KC_NO),
+  KC_NO, 	KC_NO, 		KC_NO,    							KC_NO,											KC_NO, 		KC_NO, 		TRNS, 		KC_NO, 		KC_NO, 		KC_NO),
 
   /* Keymap _LO: Lock layer
    * ,----------------------------------------------------------------.
@@ -126,7 +126,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |----------------------------------------------------------------|
    * |      |   |   |   |   |   |   |   |   |   |   |   |        |    |
    * |----------------------------------------------------------------|
-   * |        |   |   |   |   |   |   |   |   |   |   |      |   |    |
+   * |    |   |   |   |   |   |   |   |   |   |   |   |      |   |    |
    * |----------------------------------------------------------------|
    * |    |    |    |                      |   |   | _UL |   |   |    |
    * `----------------------------------------------------------------'
@@ -134,9 +134,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_LO] = KEYMAP_ANSI(
   KC_NO,	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
   KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO,  	KC_NO, 		KC_NO,  	KC_NO, 		KC_NO, \
-  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
+  KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 					KC_NO, 		KC_NO, \
   KC_NO, 	KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, 		KC_NO, \
-  KC_NO, 	KC_NO, 		KC_NO,    	KC_NO,		KC_NO, 		KC_NO, 		MO(_UL), 	KC_NO, 		KC_NO, 		KC_NO),
+  KC_NO, 	KC_NO, 		KC_NO,    							KC_NO,											KC_NO, 		KC_NO, 		MO(_UL), 	KC_NO, 		KC_NO, 		KC_NO),
 };
 
 void tap(uint16_t keycode){
diff --git a/keyboards/tada68/keymaps/maartenwut/tada68.h b/keyboards/tada68/keymaps/maartenwut/tada68.h
new file mode 100755
index 000000000..e7e17a938
--- /dev/null
+++ b/keyboards/tada68/keymaps/maartenwut/tada68.h
@@ -0,0 +1,43 @@
+#ifndef TADA68_H
+#define TADA68_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+/* TADA68 ANSI layout
+   * ,----------------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    | 0e |
+   * |----------------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d | 1e |
+   * |----------------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    | 2e |
+   * |----------------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|    3c| 3d| 3e |
+   * |----------------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 49| 4a|  4b| 4c| 4d| 4e |
+   * `----------------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, k2e, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
+	k40, k41, k42,           k45,                k49, k4a, k4b, k4c, k4d, k4e  \
+) \
+{ \
+	{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e}, \
+	{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \
+	{k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
-- 
cgit v1.2.3-70-g09d2


From 88b3d051b21cb1ddacc6353c5d59b19f03f3a242 Mon Sep 17 00:00:00 2001
From: Maarten Dekkers <maartenn2001@gmail.com>
Date: Fri, 7 Jul 2017 21:16:05 +0200
Subject: Corrected it again.

---
 keyboards/tada68/keymaps/maartenwut/Makefile  |  2 +-
 keyboards/tada68/keymaps/maartenwut/config.h  |  9 ---------
 keyboards/tada68/keymaps/maartenwut/keymap.c  | 12 ++++++------
 keyboards/tada68/keymaps/maartenwut/readme.md |  2 +-
 4 files changed, 8 insertions(+), 17 deletions(-)
 delete mode 100755 keyboards/tada68/keymaps/maartenwut/config.h

(limited to 'keyboards')

diff --git a/keyboards/tada68/keymaps/maartenwut/Makefile b/keyboards/tada68/keymaps/maartenwut/Makefile
index 79ec2f5b8..f9e169906 100755
--- a/keyboards/tada68/keymaps/maartenwut/Makefile
+++ b/keyboards/tada68/keymaps/maartenwut/Makefile
@@ -13,7 +13,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = yes		# Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 COMBO_ENABLE = no 			# Enable key combinations
 
diff --git a/keyboards/tada68/keymaps/maartenwut/config.h b/keyboards/tada68/keymaps/maartenwut/config.h
deleted file mode 100755
index 5dcdad12e..000000000
--- a/keyboards/tada68/keymaps/maartenwut/config.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#include "../../config.h"
-
-/* WS2812B RGB Underglow LED */
-#define RGB_DI_PIN F5   // See readme.md for wiring your led's
-#define RGBLIGHT_ANIMATIONS       
-#define RGBLED_NUM 16         // Number of LEDs. Change this to match your use case.
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
\ No newline at end of file
diff --git a/keyboards/tada68/keymaps/maartenwut/keymap.c b/keyboards/tada68/keymaps/maartenwut/keymap.c
index b95305a57..ce3800c49 100755
--- a/keyboards/tada68/keymaps/maartenwut/keymap.c
+++ b/keyboards/tada68/keymaps/maartenwut/keymap.c
@@ -60,13 +60,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Keymap _FL: Function Layer
    * ,----------------------------------------------------------------.
-   * |   | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|       |Prsc|
+   * |~` | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|       |Prsc|
    * |----------------------------------------------------------------|
    * |     |MbL|MsU|MbR|   |   |   |   |   |   |   |   |   |     |_LO |
    * |----------------------------------------------------------------|
    * |      |MsL|MsD|MsR|   |   |   |   |   |   |   |   |        |Hme |
    * |----------------------------------------------------------------|
-   * |    |   |   |   |   |   |   |   |   |   |   |   |      |MwU|End |
+   * |    |   |   |   |   |   |   |   |   |VoU|VoD|Mut|      |MwU|End |
    * |----------------------------------------------------------------|
    * |    |    |    |                       |   |   |    |MwL|MwD|MwR |  
    * `----------------------------------------------------------------'
@@ -82,11 +82,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * ,----------------------------------------------------------------.
    * |   |   |   |   |   |   |   |   |   |   |   |   |   |       |    |
    * |----------------------------------------------------------------|
-   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |_MA |
+   * |Lenny|   |   |   |   |   |   |   |   |   |   |   |   |     |    |
    * |----------------------------------------------------------------|
-   * |      |   |   |   |   |   |Lft|Dwn| Up|Rgt|   |   |        |    |
+   * |Dwnhrt|   |   |   |   |   |Lft|Dwn| Up|Rgt|   |   |        |    |
    * |----------------------------------------------------------------|
-   * |    |   |   |   |   |   |   |   |   |   |   |   |      |   |    |
+   * |Shrg|   |   |   |   |   |   |   |   |   |   |   |      |   |    |
    * |----------------------------------------------------------------|
    * |    |    |    |                       |   |   |    |   |   |    |
    * `----------------------------------------------------------------'
@@ -95,7 +95,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		TRNS, \
   LENNY,	TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,  		TRNS,  		TRNS, 		TRNS,		TRNS,		TRNS,		TRNS, \
   DWNHRT,	TRNS, 		TRNS,   	TRNS, 		TRNS, 		TRNS, 		KC_LEFT, 	KC_DOWN, 	KC_UP,  	KC_RGHT,  	TRNS, 		TRNS, 	 				TRNS,		TRNS, \
-  SHRUG, 	RGB_TOG,    RGB_MOD,	RGB_HUI,	RGB_HUD,	RGB_SAI, 	RGB_SAD, 	RGB_VAI, 	RGB_VAD, 	TRNS, 		TRNS,		TRNS, 		TRNS,   	TRNS,		TRNS, \
+  SHRUG, 	TRNS,   	TRNS,		TRNS,		TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS, 		TRNS,   	TRNS,		TRNS, \
   TRNS, 	TRNS, 		TRNS,								TRNS,											TRNS,		TRNS, 		TRNS,		TRNS, 		TRNS, 		TRNS),
 
   /* Keymap _UL: Unlock layer
diff --git a/keyboards/tada68/keymaps/maartenwut/readme.md b/keyboards/tada68/keymaps/maartenwut/readme.md
index 9194fbe3c..a3c97cd26 100755
--- a/keyboards/tada68/keymaps/maartenwut/readme.md
+++ b/keyboards/tada68/keymaps/maartenwut/readme.md
@@ -1,3 +1,3 @@
 # Maartenwut's layout
 
-Well, this is my keyboard layout.
+Well, this is my keyboard layout. You can call it a Tada69 if you want.
-- 
cgit v1.2.3-70-g09d2


From 9312b9db6c94f0ed5e17d4cc9904bd0b72de5298 Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Mon, 10 Jul 2017 00:46:19 -0400
Subject: Added MiniDox keyboard folder / configs / and some keymaps

---
 keyboards/minidox/Makefile                       |   5 +
 keyboards/minidox/config.h                       |  74 +++++
 keyboards/minidox/i2c.c                          | 162 ++++++++++
 keyboards/minidox/i2c.h                          |  31 ++
 keyboards/minidox/keymaps/default/keymap.c       | 168 +++++++++++
 keyboards/minidox/keymaps/that_canadian/keymap.c | 172 +++++++++++
 keyboards/minidox/matrix.c                       | 318 ++++++++++++++++++++
 keyboards/minidox/minidox.c                      |   1 +
 keyboards/minidox/minidox.h                      |  10 +
 keyboards/minidox/pro_micro.h                    | 362 +++++++++++++++++++++++
 keyboards/minidox/readme.md                      |  15 +
 keyboards/minidox/rev1/Makefile                  |   3 +
 keyboards/minidox/rev1/config.h                  |  45 +++
 keyboards/minidox/rev1/rev1.c                    |   1 +
 keyboards/minidox/rev1/rev1.h                    |  28 ++
 keyboards/minidox/rev1/rules.mk                  |   5 +
 keyboards/minidox/rules.mk                       |  75 +++++
 keyboards/minidox/serial.c                       | 228 ++++++++++++++
 keyboards/minidox/serial.h                       |  26 ++
 keyboards/minidox/split_util.c                   |  80 +++++
 keyboards/minidox/split_util.h                   |  22 ++
 21 files changed, 1831 insertions(+)
 create mode 100644 keyboards/minidox/Makefile
 create mode 100644 keyboards/minidox/config.h
 create mode 100644 keyboards/minidox/i2c.c
 create mode 100644 keyboards/minidox/i2c.h
 create mode 100644 keyboards/minidox/keymaps/default/keymap.c
 create mode 100644 keyboards/minidox/keymaps/that_canadian/keymap.c
 create mode 100644 keyboards/minidox/matrix.c
 create mode 100644 keyboards/minidox/minidox.c
 create mode 100644 keyboards/minidox/minidox.h
 create mode 100644 keyboards/minidox/pro_micro.h
 create mode 100644 keyboards/minidox/readme.md
 create mode 100644 keyboards/minidox/rev1/Makefile
 create mode 100644 keyboards/minidox/rev1/config.h
 create mode 100644 keyboards/minidox/rev1/rev1.c
 create mode 100644 keyboards/minidox/rev1/rev1.h
 create mode 100644 keyboards/minidox/rev1/rules.mk
 create mode 100644 keyboards/minidox/rules.mk
 create mode 100644 keyboards/minidox/serial.c
 create mode 100644 keyboards/minidox/serial.h
 create mode 100644 keyboards/minidox/split_util.c
 create mode 100644 keyboards/minidox/split_util.h

(limited to 'keyboards')

diff --git a/keyboards/minidox/Makefile b/keyboards/minidox/Makefile
new file mode 100644
index 000000000..30b43c4ea
--- /dev/null
+++ b/keyboards/minidox/Makefile
@@ -0,0 +1,5 @@
+SUBPROJECT_DEFAULT = rev1
+
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/minidox/config.h b/keyboards/minidox/config.h
new file mode 100644
index 000000000..306a486cb
--- /dev/null
+++ b/keyboards/minidox/config.h
@@ -0,0 +1,74 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define MANUFACTURER    That-Canadian
+#define PRODUCT         MiniDox
+#define DESCRIPTION     A compact version of the Ergo Dox
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1/config.h"
+#endif
+
+#endif
diff --git a/keyboards/minidox/i2c.c b/keyboards/minidox/i2c.c
new file mode 100644
index 000000000..084c890c4
--- /dev/null
+++ b/keyboards/minidox/i2c.c
@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif
diff --git a/keyboards/minidox/i2c.h b/keyboards/minidox/i2c.h
new file mode 100644
index 000000000..08ce4b009
--- /dev/null
+++ b/keyboards/minidox/i2c.h
@@ -0,0 +1,31 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  100000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+#endif
diff --git a/keyboards/minidox/keymaps/default/keymap.c b/keyboards/minidox/keymaps/default/keymap.c
new file mode 100644
index 000000000..3fa20e1eb
--- /dev/null
+++ b/keyboards/minidox/keymaps/default/keymap.c
@@ -0,0 +1,168 @@
+#include "minidox.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   Q  |   W  |   E  |   R  |   T  |           |   Y  |   U  |   I  |   O  |   P  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |   A  |   S  |   D  |   F  |   G  |           |   H  |   J  |   K  |   L  |   ;  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |   Z  |   X  |   C  |   V  |   B  |           |   N  |   M  |   ,  |   .  |   /  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  | Ctrl | LOWER|      |    |      | RAISE| Shift|
+ *                  `-------------| Space|    |BckSpc|------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    \
+  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, \
+  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,         KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, \
+                    KC_LCTL, LOWER, KC_SPC,         KC_BSPC, RAISE, OSM(MOD_LSFT)                 \
+),
+
+/* Raise
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |           |   6  |   7  |   8  |   9  |   0  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Tab | Left | Down |  Up  | Right|           |      |   -  |   =  |   [  |   ]  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Ctrl|   `  |  GUI |  Alt |      |           |      |      |      |   \  |   '  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|      |
+ *                  `-------------|      |    |      |------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,         KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    \
+  KC_TAB,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT,      _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, \
+  KC_LCTL, KC_GRV,  KC_LGUI, KC_LALT, _______,      _______, _______, _______, KC_BSLS,  KC_QUOT, \
+                    _______, _______, _______,      _______, _______, _______                    \
+),
+
+/* Lower
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   !  |   @  |   #  |   $  |   %  |           |   ^  |   &  |   *  |   (  |   )  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Esc |      |      |      |      |           |      |   _  |   +  |   {  |   }  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Caps|   ~  |      |      |      |           |      |      |      |   |  |   "  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|  Del |
+ *                  `-------------|      |    | Enter|------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \
+  KC_ESC,  _______, _______, _______, _______,      _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \
+  KC_CAPS, KC_TILD, _______, _______, _______,      _______, _______, _______, KC_PIPE,  KC_DQT, \
+                    _______, _______, _______,      KC_ENT,  _______, KC_DEL                    \
+),
+
+/* Adjust (Lower + Raise)
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |           |   F6 |  F7  |  F8  |  F9  |  F10 |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  F11 |  F12 |      |      |      |           |      |      |      |Taskmg|caltde|
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * | Reset|      |      |      |      |           |      |      |      |      |      |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|      |
+ *                  `-------------|      |    |      |------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_ADJUST] =  KEYMAP( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,        KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10, \
+  KC_F11,  KC_F12,  _______, _______, _______,      _______, _______, _______, TSKMGR, CALTDEL, \
+  RESET,   _______, _______, _______, _______,      _______, _______, _______, _______,  _______, \
+                    _______, _______, _______,      _______,  _______, _______                    \
+)
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/minidox/keymaps/that_canadian/keymap.c b/keyboards/minidox/keymaps/that_canadian/keymap.c
new file mode 100644
index 000000000..838f30602
--- /dev/null
+++ b/keyboards/minidox/keymaps/that_canadian/keymap.c
@@ -0,0 +1,172 @@
+#include "minidox.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   Q  |   W  |   E  |   R  |   T  |           |   Y  |   U  |   I  |   O  |   P  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |   A  |   S  |   D  |   F  |   G  |           |   H  |   J  |   K  |   L  |   ;  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |   Z  |   X  |   C  |   V  |   B  |           |   N  |   M  |   ,  |   .  |   /  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  | Ctrl | LOWER|      |    |      | RAISE| Shift|
+ *                  `-------------| Space|    |BckSpc|------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    \
+  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, \
+  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,         KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, \
+                    KC_LCTL, LOWER, KC_SPC,         KC_BSPC, RAISE, OSM(MOD_LSFT)                 \
+),
+
+/* Raise
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |           |   6  |   7  |   8  |   9  |   0  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Tab | Left | Down |  Up  | Right|           |      |   -  |   =  |   [  |   ]  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Ctrl|   `  |  GUI |  Alt |      |           |      |      |      |   \  |   '  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|      |
+ *                  `-------------|      |    |      |------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,         KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    \
+  KC_TAB,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT,      _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, \
+  KC_LCTL, KC_GRV,  KC_LGUI, KC_LALT, _______,      _______, _______, _______, KC_BSLS,  KC_QUOT, \
+                    _______, _______, _______,      _______, _______, _______                    \
+),
+
+/* Lower
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   !  |   @  |   #  |   $  |   %  |           |   ^  |   &  |   *  |   (  |   )  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Esc |      |      |      |      |           |      |   _  |   +  |   {  |   }  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Caps|   ~  |      |      |      |           |      |      |      |   |  |   "  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|  Del |
+ *                  `-------------|      |    | Enter|------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \
+  KC_ESC,  _______, _______, _______, _______,      _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \
+  KC_CAPS, KC_TILD, _______, _______, _______,      _______, _______, _______, KC_PIPE,  KC_DQT, \
+                    _______, _______, _______,      KC_ENT,  _______, KC_DEL                    \
+),
+
+/* Adjust (Lower + Raise)
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |           |   F6 |  F7  |  F8  |  F9  |  F10 |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  F11 |  F12 |      |      |      |           |      |      |      |Taskmg|caltde|
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * | Reset|      |      |      |      |           |      |      |      |      |      |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|      |
+ *                  `-------------|      |    |      |------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_ADJUST] =  KEYMAP( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,        KC_F6,   KC_F7,   KC_UP,   KC_F9,   KC_F10, \
+  KC_F11,  KC_F12,  _______, _______, _______,      _______, KC_LEFT, KC_DOWN, KC_RGHT, CALTDEL, \
+  RESET,   _______, _______, _______, _______,      _______, _______, KC_F8, TSKMGR,  _______, \
+                    _______, _______, _______,      _______,  _______, _______                    \
+)
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/minidox/matrix.c b/keyboards/minidox/matrix.c
new file mode 100644
index 000000000..138969004
--- /dev/null
+++ b/keyboards/minidox/matrix.c
@@ -0,0 +1,318 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCE
+#  define DEBOUNCE	5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void)
+{
+    // Right hand is stored after the left in the matirx so, we need to offset it
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i+offset] != cols) {
+            matrix_debouncing[i+offset] = cols;
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+        }
+    }
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        int i;
+        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+        }
+        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    int ret = _matrix_scan();
+
+
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+
+    matrix_scan_quantum();
+
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2);
+
+#ifdef USE_I2C
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        /* i2c_slave_buffer[i] = matrix[offset+i]; */
+        i2c_slave_buffer[i] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void  init_cols(void)
+{
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
+        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    }
+}
+
+static matrix_row_t read_cols(void)
+{
+    matrix_row_t result = 0;
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+    }
+    return result;
+}
+
+static void unselect_rows(void)
+{
+    for(int x = 0; x < ROWS_PER_HAND; x++) {
+        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
+        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    }
+}
+
+static void select_row(uint8_t row)
+{
+    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
+    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}
diff --git a/keyboards/minidox/minidox.c b/keyboards/minidox/minidox.c
new file mode 100644
index 000000000..b4bffbb3e
--- /dev/null
+++ b/keyboards/minidox/minidox.c
@@ -0,0 +1 @@
+#include "minidox.h"
\ No newline at end of file
diff --git a/keyboards/minidox/minidox.h b/keyboards/minidox/minidox.h
new file mode 100644
index 000000000..479c7aec7
--- /dev/null
+++ b/keyboards/minidox/minidox.h
@@ -0,0 +1,10 @@
+#ifndef MINIDOX_H
+#define MINIDOX_H
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"
+
+#endif
\ No newline at end of file
diff --git a/keyboards/minidox/pro_micro.h b/keyboards/minidox/pro_micro.h
new file mode 100644
index 000000000..f9e7ed75d
--- /dev/null
+++ b/keyboards/minidox/pro_micro.h
@@ -0,0 +1,362 @@
+/*
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+// Workaround for wrong definitions in "iom32u4.h".
+// This should be fixed in the AVR toolchain.
+#undef UHCON
+#undef UHINT
+#undef UHIEN
+#undef UHADDR
+#undef UHFNUM
+#undef UHFNUML
+#undef UHFNUMH
+#undef UHFLEN
+#undef UPINRQX
+#undef UPINTX
+#undef UPNUM
+#undef UPRST
+#undef UPCONX
+#undef UPCFG0X
+#undef UPCFG1X
+#undef UPSTAX
+#undef UPCFG2X
+#undef UPIENX
+#undef UPDATX
+#undef TCCR2A
+#undef WGM20
+#undef WGM21
+#undef COM2B0
+#undef COM2B1
+#undef COM2A0
+#undef COM2A1
+#undef TCCR2B
+#undef CS20
+#undef CS21
+#undef CS22
+#undef WGM22
+#undef FOC2B
+#undef FOC2A
+#undef TCNT2
+#undef TCNT2_0
+#undef TCNT2_1
+#undef TCNT2_2
+#undef TCNT2_3
+#undef TCNT2_4
+#undef TCNT2_5
+#undef TCNT2_6
+#undef TCNT2_7
+#undef OCR2A
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+#undef OCR2B
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+
+#define NUM_DIGITAL_PINS  30
+#define NUM_ANALOG_INPUTS 12
+
+#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
+#define TXLED0          PORTD |= (1<<5)
+#define TXLED1          PORTD &= ~(1<<5)
+#define RXLED0          PORTB |= (1<<0)
+#define RXLED1          PORTB &= ~(1<<0)
+
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 3;
+#define LED_BUILTIN 13
+
+// Map SPI port to 'new' pins D14..D17
+static const uint8_t SS   = 17;
+static const uint8_t MOSI = 16;
+static const uint8_t MISO = 14;
+static const uint8_t SCK  = 15;
+
+// Mapping of analog pins as digital I/O
+// A6-A11 share with digital pins
+static const uint8_t ADC0 = 18;
+static const uint8_t ADC1 = 19;
+static const uint8_t ADC2 = 20;
+static const uint8_t ADC3 = 21;
+static const uint8_t ADC4 = 22;
+static const uint8_t ADC5 = 23;
+static const uint8_t ADC6 = 24;   // D4
+static const uint8_t ADC7 = 25;   // D6
+static const uint8_t ADC8 = 26;   // D8
+static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC10 = 28;  // D10
+static const uint8_t ADC11 = 29;  // D12
+
+#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICRbit(p) 0
+#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
+#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
+
+//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
+extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
+#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
+
+#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
+
+#ifdef ARDUINO_MAIN
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
+//
+// D0               PD2                 RXD1/INT2
+// D1               PD3                 TXD1/INT3
+// D2               PD1     SDA         SDA/INT1
+// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
+// D4       A6      PD4                 ADC8
+// D5#              PC6     ???         OC3A/#OC4A
+// D6#      A7      PD7     FastPWM     #OC4D/ADC10
+// D7               PE6                 INT6/AIN0
+//
+// D8       A8      PB4                 ADC11/PCINT4
+// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
+// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
+// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
+// D12      A11     PD6                 T1/#OC4D/ADC9
+// D13#             PC7     PWM10       CLK0/OC4A
+//
+// A0       D18     PF7                 ADC7
+// A1       D19     PF6                 ADC6
+// A2       D20     PF5                 ADC5
+// A3       D21     PF4                 ADC4
+// A4       D22     PF1                 ADC1
+// A5       D23     PF0                 ADC0
+//
+// New pins D14..D17 to map SPI port to digital pins
+//
+// MISO     D14     PB3                 MISO,PCINT3
+// SCK      D15     PB1                 SCK,PCINT1
+// MOSI     D16     PB2                 MOSI,PCINT2
+// SS       D17     PB0                 RXLED,SS/PCINT0
+//
+// Connected LEDs on board for TX and RX
+// TXLED    D24     PD5                 XCK1
+// RXLED    D17     PB0
+// HWB              PE2                 HWB
+
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &DDRB,
+    (uint16_t) &DDRC,
+    (uint16_t) &DDRD,
+    (uint16_t) &DDRE,
+    (uint16_t) &DDRF,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PORTB,
+    (uint16_t) &PORTC,
+    (uint16_t) &PORTD,
+    (uint16_t) &PORTE,
+    (uint16_t) &PORTF,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PINB,
+    (uint16_t) &PINC,
+    (uint16_t) &PIND,
+    (uint16_t) &PINE,
+    (uint16_t) &PINF,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+    PD, // D0 - PD2
+    PD, // D1 - PD3
+    PD, // D2 - PD1
+    PD, // D3 - PD0
+    PD, // D4 - PD4
+    PC, // D5 - PC6
+    PD, // D6 - PD7
+    PE, // D7 - PE6
+
+    PB, // D8 - PB4
+    PB, // D9 - PB5
+    PB, // D10 - PB6
+    PB, // D11 - PB7
+    PD, // D12 - PD6
+    PC, // D13 - PC7
+
+    PB, // D14 - MISO - PB3
+    PB, // D15 - SCK - PB1
+    PB, // D16 - MOSI - PB2
+    PB, // D17 - SS - PB0
+
+    PF, // D18 - A0 - PF7
+    PF, // D19 - A1 - PF6
+    PF, // D20 - A2 - PF5
+    PF, // D21 - A3 - PF4
+    PF, // D22 - A4 - PF1
+    PF, // D23 - A5 - PF0
+
+    PD, // D24 - PD5
+    PD, // D25 / D6 - A7 - PD7
+    PB, // D26 / D8 - A8 - PB4
+    PB, // D27 / D9 - A9 - PB5
+    PB, // D28 / D10 - A10 - PB6
+    PD, // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+    _BV(2), // D0 - PD2
+    _BV(3), // D1 - PD3
+    _BV(1), // D2 - PD1
+    _BV(0), // D3 - PD0
+    _BV(4), // D4 - PD4
+    _BV(6), // D5 - PC6
+    _BV(7), // D6 - PD7
+    _BV(6), // D7 - PE6
+
+    _BV(4), // D8 - PB4
+    _BV(5), // D9 - PB5
+    _BV(6), // D10 - PB6
+    _BV(7), // D11 - PB7
+    _BV(6), // D12 - PD6
+    _BV(7), // D13 - PC7
+
+    _BV(3), // D14 - MISO - PB3
+    _BV(1), // D15 - SCK - PB1
+    _BV(2), // D16 - MOSI - PB2
+    _BV(0), // D17 - SS - PB0
+
+    _BV(7), // D18 - A0 - PF7
+    _BV(6), // D19 - A1 - PF6
+    _BV(5), // D20 - A2 - PF5
+    _BV(4), // D21 - A3 - PF4
+    _BV(1), // D22 - A4 - PF1
+    _BV(0), // D23 - A5 - PF0
+
+    _BV(5), // D24 - PD5
+    _BV(7), // D25 / D6 - A7 - PD7
+    _BV(4), // D26 / D8 - A8 - PB4
+    _BV(5), // D27 / D9 - A9 - PB5
+    _BV(6), // D28 / D10 - A10 - PB6
+    _BV(6), // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    TIMER0B,        /* 3 */
+    NOT_ON_TIMER,
+    TIMER3A,        /* 5 */
+    TIMER4D,        /* 6 */
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    TIMER1A,        /* 9 */
+    TIMER1B,        /* 10 */
+    TIMER0A,        /* 11 */
+
+    NOT_ON_TIMER,
+    TIMER4A,        /* 13 */
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+};
+
+const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
+    7,  // A0               PF7                 ADC7
+    6,  // A1               PF6                 ADC6
+    5,  // A2               PF5                 ADC5
+    4,  // A3               PF4                 ADC4
+    1,  // A4               PF1                 ADC1
+    0,  // A5               PF0                 ADC0
+    8,  // A6       D4      PD4                 ADC8
+    10, // A7       D6      PD7                 ADC10
+    11, // A8       D8      PB4                 ADC11
+    12, // A9       D9      PB5                 ADC12
+    13, // A10      D10     PB6                 ADC13
+    9   // A11      D12     PD6                 ADC9
+};
+
+#endif /* ARDUINO_MAIN */
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR        Serial
+#define SERIAL_PORT_USBVIRTUAL     Serial
+#define SERIAL_PORT_HARDWARE       Serial1
+#define SERIAL_PORT_HARDWARE_OPEN  Serial1
+
+#endif /* Pins_Arduino_h */
diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md
new file mode 100644
index 000000000..37ab84b08
--- /dev/null
+++ b/keyboards/minidox/readme.md
@@ -0,0 +1,15 @@
+ECO
+===
+
+![MimiDox](http://i.imgur.com/iWb3yO0.jpg)
+
+DESCRIPTION HERE
+
+Keyboard Maintainer: That-Canadian
+Hardware Supported: MiniDox PCB rev1 Pro Micro
+
+Make example for this keyboard (after setting up your build environment):
+
+    make minidox-rev1-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/minidox/rev1/Makefile b/keyboards/minidox/rev1/Makefile
new file mode 100644
index 000000000..4e2a6f00f
--- /dev/null
+++ b/keyboards/minidox/rev1/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/minidox/rev1/config.h b/keyboards/minidox/rev1/config.h
new file mode 100644
index 000000000..4370e7d73
--- /dev/null
+++ b/keyboards/minidox/rev1/config.h
@@ -0,0 +1,45 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include "config_common.h"
+
+#define DEVICE_VER      0x0001
+
+// wiring of each half
+#define MATRIX_ROW_PINS { B2, B6, B4, B5 }
+#define MATRIX_COL_PINS { F4, D3, D2, D1, D4 }
+
+#define CATERINA_BOOTLOADER
+
+#define USE_SERIAL
+
+// #define EE_HANDS
+
+#define I2C_MASTER_LEFT
+//#define I2C_MASTER_RIGHT
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+#endif
diff --git a/keyboards/minidox/rev1/rev1.c b/keyboards/minidox/rev1/rev1.c
new file mode 100644
index 000000000..72b473933
--- /dev/null
+++ b/keyboards/minidox/rev1/rev1.c
@@ -0,0 +1 @@
+#include "minidox.h"
diff --git a/keyboards/minidox/rev1/rev1.h b/keyboards/minidox/rev1/rev1.h
new file mode 100644
index 000000000..379dbf64a
--- /dev/null
+++ b/keyboards/minidox/rev1/rev1.h
@@ -0,0 +1,28 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "../minidox.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+//void promicro_bootloader_jmp(bool program);
+
+#define KEYMAP( \
+	k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, \
+	k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, \
+	k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, \
+	          k33, k34, k35, k75, k74, k73            \
+	) \
+	{ \
+		{ k01, k02, k03, k04, k05 }, \
+		{ k11, k12, k13, k14, k15 }, \
+		{ k21, k22, k23, k24, k25 }, \
+		{ KC_NO, KC_NO, k33, k34, k35 }, \
+		{ k41, k42, k43, k44, k45 }, \
+		{ k51, k52, k53, k54, k55 }, \
+		{ k61, k62, k63, k64, k65 }, \
+		{ KC_NO, KC_NO, k73, k74, k75 } \
+	}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/minidox/rev1/rules.mk b/keyboards/minidox/rev1/rules.mk
new file mode 100644
index 000000000..a0825b4ef
--- /dev/null
+++ b/keyboards/minidox/rev1/rules.mk
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk
new file mode 100644
index 000000000..a9eee7bf1
--- /dev/null
+++ b/keyboards/minidox/rules.mk
@@ -0,0 +1,75 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= no       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SUBPROJECT_rev1 ?= yes
+USE_I2C ?= no
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
diff --git a/keyboards/minidox/serial.c b/keyboards/minidox/serial.c
new file mode 100644
index 000000000..6faed09ce
--- /dev/null
+++ b/keyboards/minidox/serial.c
@@ -0,0 +1,228 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifdef USE_SERIAL
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < 8; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 8;
+  serial_output();
+  while( b-- ) {
+    if(data & (1 << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += serial_master_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  uint8_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif
diff --git a/keyboards/minidox/serial.h b/keyboards/minidox/serial.h
new file mode 100644
index 000000000..15fe4db7b
--- /dev/null
+++ b/keyboards/minidox/serial.h
@@ -0,0 +1,26 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif
diff --git a/keyboards/minidox/split_util.c b/keyboards/minidox/split_util.c
new file mode 100644
index 000000000..461921798
--- /dev/null
+++ b/keyboards/minidox/split_util.c
@@ -0,0 +1,80 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    #ifdef I2C_MASTER_RIGHT
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        keyboard_slave_loop();
+    }
+}
diff --git a/keyboards/minidox/split_util.h b/keyboards/minidox/split_util.h
new file mode 100644
index 000000000..6b896679c
--- /dev/null
+++ b/keyboards/minidox/split_util.h
@@ -0,0 +1,22 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+
+#ifdef EE_HANDS
+	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
+	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
+#endif
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+#endif
-- 
cgit v1.2.3-70-g09d2


From aca0f4dcaed3af3ae2ed689e3ae556269c3f6691 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 9 Jul 2017 13:20:03 +0300
Subject: Move GDISP drivers to /drivers/ugfx

---
 drivers/ugfx/gdisp/IS31FL3731C/driver.mk           |   2 +
 drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c | 312 +++++++++++++++++++
 drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h  |  36 +++
 drivers/ugfx/gdisp/st7565ergodox/driver.mk         |   2 +
 .../ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c    | 329 +++++++++++++++++++++
 .../ugfx/gdisp/st7565ergodox/gdisp_lld_config.h    |  27 ++
 drivers/ugfx/gdisp/st7565ergodox/st7565.h          |  39 +++
 keyboards/ergodox/infinity/board_IS31FL3731C.h     | 113 +++++++
 keyboards/ergodox/infinity/board_ST7565.h          | 113 +++++++
 .../drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h  | 113 -------
 .../infinity/drivers/gdisp/IS31FL3731C/driver.mk   |   2 -
 .../drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c  | 312 -------------------
 .../drivers/gdisp/IS31FL3731C/gdisp_lld_config.h   |  36 ---
 .../drivers/gdisp/st7565ergodox/board_ST7565.h     | 113 -------
 .../infinity/drivers/gdisp/st7565ergodox/driver.mk |   2 -
 .../drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c | 329 ---------------------
 .../drivers/gdisp/st7565ergodox/gdisp_lld_config.h |  27 --
 .../infinity/drivers/gdisp/st7565ergodox/st7565.h  |  39 ---
 keyboards/ergodox/infinity/rules.mk                |   4 +-
 keyboards/whitefox/board_IS31FL3731C.h             | 109 +++++++
 .../drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h  | 109 -------
 .../whitefox/drivers/gdisp/IS31FL3731C/driver.mk   |   2 -
 .../drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c  | 312 -------------------
 .../drivers/gdisp/IS31FL3731C/gdisp_lld_config.h   |  36 ---
 keyboards/whitefox/rules.mk                        |   2 +-
 25 files changed, 1085 insertions(+), 1435 deletions(-)
 create mode 100644 drivers/ugfx/gdisp/IS31FL3731C/driver.mk
 create mode 100644 drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
 create mode 100644 drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h
 create mode 100644 drivers/ugfx/gdisp/st7565ergodox/driver.mk
 create mode 100644 drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c
 create mode 100644 drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h
 create mode 100644 drivers/ugfx/gdisp/st7565ergodox/st7565.h
 create mode 100644 keyboards/ergodox/infinity/board_IS31FL3731C.h
 create mode 100644 keyboards/ergodox/infinity/board_ST7565.h
 delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
 delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk
 delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
 delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
 delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
 delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
 delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
 delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
 delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
 create mode 100644 keyboards/whitefox/board_IS31FL3731C.h
 delete mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
 delete mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk
 delete mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
 delete mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h

(limited to 'keyboards')

diff --git a/drivers/ugfx/gdisp/IS31FL3731C/driver.mk b/drivers/ugfx/gdisp/IS31FL3731C/driver.mk
new file mode 100644
index 000000000..58a16d209
--- /dev/null
+++ b/drivers/ugfx/gdisp/IS31FL3731C/driver.mk
@@ -0,0 +1,2 @@
+GFXINC += drivers/ugfx/gdisp/IS31FL3731C
+GFXSRC += drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
diff --git a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
new file mode 100644
index 000000000..2d78a5533
--- /dev/null
+++ b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
@@ -0,0 +1,312 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_ERGODOX
+#include "gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_IS31FL3731C.h"
+
+
+// Can't include led_tables from here
+extern const uint8_t CIE1931_CURVE[];
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+#ifndef GDISP_SCREEN_HEIGHT
+	#define GDISP_SCREEN_HEIGHT		9
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+	#define GDISP_SCREEN_WIDTH		16
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+	#define GDISP_INITIAL_CONTRAST	0
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+	#define GDISP_INITIAL_BACKLIGHT	0
+#endif
+
+#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+
+#define IS31_ADDR_DEFAULT 0x74
+
+#define IS31_REG_CONFIG  0x00
+// bits in reg
+#define IS31_REG_CONFIG_PICTUREMODE 0x00
+#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
+// D2:D0 bits are starting frame for autoplay mode
+
+#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
+
+#define IS31_REG_AUTOPLAYCTRL1 0x02
+// D6:D4 number of loops (000=infty)
+// D2:D0 number of frames to be used
+
+#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
+
+#define IS31_REG_DISPLAYOPT 0x05
+#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
+#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+// D2:D0 bits blink period time (*0.27s)
+
+#define IS31_REG_AUDIOSYNC 0x06
+#define IS31_REG_AUDIOSYNC_ENABLE 0x1
+
+#define IS31_REG_FRAMESTATE 0x07
+
+#define IS31_REG_BREATHCTRL1 0x08
+// D6:D4 fade out time (26ms*2^i)
+// D2:D0 fade in time (26ms*2^i)
+
+#define IS31_REG_BREATHCTRL2 0x09
+#define IS31_REG_BREATHCTRL2_ENABLE 0x10
+// D2:D0 extinguish time (3.5ms*2^i)
+
+#define IS31_REG_SHUTDOWN 0x0A
+#define IS31_REG_SHUTDOWN_OFF 0x0
+#define IS31_REG_SHUTDOWN_ON 0x1
+
+#define IS31_REG_AGCCTRL 0x0B
+#define IS31_REG_ADCRATE 0x0C
+
+#define IS31_COMMANDREGISTER 0xFD
+#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+#define IS31_FUNCTIONREG_SIZE 0xD
+
+#define IS31_FRAME_SIZE 0xB4
+
+#define IS31_PWM_REG 0x24
+#define IS31_PWM_SIZE 0x90
+
+#define IS31_LED_MASK_SIZE 0x12
+#define IS31_SCREEN_WIDTH 16
+
+#define IS31
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+typedef struct{
+    uint8_t write_buffer_offset;
+    uint8_t write_buffer[IS31_FRAME_SIZE];
+    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
+    uint8_t page;
+}__attribute__((__packed__)) PrivData;
+
+// Some common routines and macros
+#define PRIV(g)                         ((PrivData*)g->priv)
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+
+static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
+    uint8_t tx[2] __attribute__((aligned(2)));
+    tx[0] = IS31_COMMANDREGISTER;
+    tx[1] = page;
+    write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
+    uint8_t tx[2] __attribute__((aligned(2)));
+    tx[0] = reg;
+    tx[1] = data;
+    write_page(g, page);
+    write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
+    PRIV(g)->write_buffer_offset = offset;
+    write_page(g, page);
+    write_data(g, (uint8_t*)PRIV(g), length + 1);
+}
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+	// The private area is the display surface.
+	g->priv = gfxAlloc(sizeof(PrivData));
+    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
+	PRIV(g)->page = 0;
+
+	// Initialise the board interface
+	init_board(g);
+	gfxSleepMilliseconds(10);
+
+    // zero function page, all registers (assuming full_page is all zeroes)
+    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+    set_hardware_shutdown(g, false);
+    gfxSleepMilliseconds(10);
+    // software shutdown
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+    gfxSleepMilliseconds(10);
+    // zero function page, all registers
+    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+    gfxSleepMilliseconds(10);
+
+
+    // zero all LED registers on all 8 pages, and enable the mask
+    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
+    for(uint8_t i=0; i<8; i++) {
+        write_ram(g, i, 0, IS31_FRAME_SIZE);
+        gfxSleepMilliseconds(1);
+    }
+
+    // software shutdown disable (i.e. turn stuff on)
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+    gfxSleepMilliseconds(10);
+
+    // Finish Init
+    post_init_board(g);
+
+	/* Initialise the GDISP structure */
+	g->g.Width = GDISP_SCREEN_WIDTH;
+	g->g.Height = GDISP_SCREEN_HEIGHT;
+	g->g.Orientation = GDISP_ROTATE_0;
+	g->g.Powermode = powerOff;
+	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+	g->g.Contrast = GDISP_INITIAL_CONTRAST;
+	return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+		// Don't flush if we don't need it.
+		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+			return;
+
+		PRIV(g)->page++;
+		PRIV(g)->page %= 2;
+		// TODO: some smarter algorithm for this
+		// We should run only one physical page at a time
+		// This way we don't need to send so much data, and
+		// we could use slightly less memory
+		uint8_t* src = PRIV(g)->frame_buffer;
+		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
+		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
+		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
+		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
+		        ++src;
+		    }
+		}
+        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
+        gfxSleepMilliseconds(1);
+        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
+
+		g->flags &= ~GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = g->p.y;
+			break;
+		}
+		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+		g->flags |= GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_PIXELREAD
+	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = g->p.y;
+			break;
+		}
+		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+	}
+#endif
+
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+	LLDSPEC void gdisp_lld_control(GDisplay *g) {
+		switch(g->p.x) {
+		case GDISP_CONTROL_POWER:
+			if (g->g.Powermode == (powermode_t)g->p.ptr)
+				return;
+			switch((powermode_t)g->p.ptr) {
+			case powerOff:
+			case powerSleep:
+			case powerDeepSleep:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+				break;
+			case powerOn:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+				break;
+			default:
+				return;
+			}
+			g->g.Powermode = (powermode_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_ORIENTATION:
+			if (g->g.Orientation == (orientation_t)g->p.ptr)
+				return;
+			switch((orientation_t)g->p.ptr) {
+			/* Rotation is handled by the drawing routines */
+			case GDISP_ROTATE_0:
+			case GDISP_ROTATE_180:
+				g->g.Height = GDISP_SCREEN_HEIGHT;
+				g->g.Width = GDISP_SCREEN_WIDTH;
+				break;
+			case GDISP_ROTATE_90:
+			case GDISP_ROTATE_270:
+				g->g.Height = GDISP_SCREEN_WIDTH;
+				g->g.Width = GDISP_SCREEN_HEIGHT;
+				break;
+			default:
+				return;
+			}
+			g->g.Orientation = (orientation_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_BACKLIGHT:
+		    if (g->g.Backlight == (unsigned)g->p.ptr)
+                return;
+		    unsigned val = (unsigned)g->p.ptr;
+		    g->g.Backlight = val > 100 ? 100 : val;
+            g->flags |= GDISP_FLG_NEEDFLUSH;
+		    return;
+		}
+	}
+#endif // GDISP_NEED_CONTROL
+
+#endif // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h
new file mode 100644
index 000000000..bb28ad775
--- /dev/null
+++ b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h
@@ -0,0 +1,36 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support.                                                  */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL		TRUE
+#define GDISP_HARDWARE_PIXELREAD		TRUE
+#define GDISP_HARDWARE_CONTROL			TRUE
+
+#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
+
+#endif	/* GFX_USE_GDISP */
+
+#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565ergodox/driver.mk b/drivers/ugfx/gdisp/st7565ergodox/driver.mk
new file mode 100644
index 000000000..401e15e69
--- /dev/null
+++ b/drivers/ugfx/gdisp/st7565ergodox/driver.mk
@@ -0,0 +1,2 @@
+GFXINC += drivers/ugfx/gdisp/st7565ergodox
+GFXSRC += drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c
diff --git a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c
new file mode 100644
index 000000000..c576280a1
--- /dev/null
+++ b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c
@@ -0,0 +1,329 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_ERGODOX
+#include "gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_ST7565.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+#ifndef GDISP_SCREEN_HEIGHT
+#define GDISP_SCREEN_HEIGHT		32
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+#define GDISP_SCREEN_WIDTH		128
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+#define GDISP_INITIAL_CONTRAST	35
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+#define GDISP_INITIAL_BACKLIGHT	100
+#endif
+
+#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+
+#include "st7565.h"
+
+/*===========================================================================*/
+/* Driver config defaults for backward compatibility.               	     */
+/*===========================================================================*/
+#ifndef ST7565_LCD_BIAS
+#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
+#endif
+#ifndef ST7565_ADC
+#define ST7565_ADC              ST7565_ADC_NORMAL
+#endif
+#ifndef ST7565_COM_SCAN
+#define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
+#endif
+#ifndef ST7565_PAGE_ORDER
+#define ST7565_PAGE_ORDER       0,1,2,3
+#endif
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+typedef struct{
+    bool_t buffer2;
+    uint8_t data_pos;
+    uint8_t data[16];
+    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
+}PrivData;
+
+// Some common routines and macros
+#define PRIV(g)                         ((PrivData*)g->priv)
+#define RAM(g)							(PRIV(g)->ram)
+
+static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
+    PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
+}
+
+static GFXINLINE void flush_cmd(GDisplay* g) {
+    write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
+    PRIV(g)->data_pos = 0;
+}
+
+#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
+#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+
+// Some common routines and macros
+#define delay(us)			gfxSleepMicroseconds(us)
+#define delay_ms(ms)		gfxSleepMilliseconds(ms)
+
+#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
+#define xybit(y)			(1<<((y)&7))
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+
+/*
+ * As this controller can't update on a pixel boundary we need to maintain the
+ * the entire display surface in memory so that we can do the necessary bit
+ * operations. Fortunately it is a small display in monochrome.
+ * 64 * 128 / 8 = 1024 bytes.
+ */
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+    // The private area is the display surface.
+    g->priv = gfxAlloc(sizeof(PrivData));
+    PRIV(g)->buffer2 = false;
+    PRIV(g)->data_pos = 0;
+
+    // Initialise the board interface
+    init_board(g);
+
+    // Hardware reset
+    setpin_reset(g, TRUE);
+    gfxSleepMilliseconds(20);
+    setpin_reset(g, FALSE);
+    gfxSleepMilliseconds(20);
+    acquire_bus(g);
+    enter_cmd_mode(g);
+
+    write_cmd(g, ST7565_RESET);
+    write_cmd(g, ST7565_LCD_BIAS);
+    write_cmd(g, ST7565_ADC);
+    write_cmd(g, ST7565_COM_SCAN);
+
+    write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
+    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
+
+    // turn on internal power supply (VC=1, VR=1, VF=1)
+    write_cmd(g, ST7565_POWER_CONTROL | 0x07);
+
+    write_cmd(g, ST7565_INVERT_DISPLAY);
+    write_cmd(g, ST7565_ALLON_NORMAL);
+
+    write_cmd(g, ST7565_START_LINE | 0);
+    write_cmd(g, ST7565_RMW);
+    flush_cmd(g);
+
+    // Finish Init
+    post_init_board(g);
+
+    // Release the bus
+    release_bus(g);
+
+    /* Initialise the GDISP structure */
+    g->g.Width = GDISP_SCREEN_WIDTH;
+    g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Orientation = GDISP_ROTATE_0;
+    g->g.Powermode = powerOff;
+    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+    g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+    unsigned	p;
+
+    // Don't flush if we don't need it.
+    if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+        return;
+
+    acquire_bus(g);
+    enter_cmd_mode(g);
+    unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
+    for (p = 0; p < 4; p++) {
+        write_cmd(g, ST7565_PAGE | (p + dstOffset));
+        write_cmd(g, ST7565_COLUMN_MSB | 0);
+        write_cmd(g, ST7565_COLUMN_LSB | 0);
+        write_cmd(g, ST7565_RMW);
+        flush_cmd(g);
+        enter_data_mode(g);
+        write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+        enter_cmd_mode(g);
+    }
+    unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
+    write_cmd(g, ST7565_START_LINE | line);
+    flush_cmd(g);
+    PRIV(g)->buffer2 = !PRIV(g)->buffer2;
+    release_bus(g);
+
+    g->flags &= ~GDISP_FLG_NEEDFLUSH;
+}
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+    coord_t		x, y;
+
+    switch(g->g.Orientation) {
+    default:
+    case GDISP_ROTATE_0:
+        x = g->p.x;
+        y = g->p.y;
+        break;
+    case GDISP_ROTATE_90:
+        x = g->p.y;
+        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+        break;
+    case GDISP_ROTATE_180:
+        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+        break;
+    case GDISP_ROTATE_270:
+        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+        y = g->p.x;
+        break;
+    }
+    if (gdispColor2Native(g->p.color) != Black)
+        RAM(g)[xyaddr(x, y)] |= xybit(y);
+    else
+        RAM(g)[xyaddr(x, y)] &= ~xybit(y);
+    g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+#endif
+
+#if GDISP_HARDWARE_PIXELREAD
+LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+    coord_t		x, y;
+
+    switch(g->g.Orientation) {
+    default:
+    case GDISP_ROTATE_0:
+        x = g->p.x;
+        y = g->p.y;
+        break;
+    case GDISP_ROTATE_90:
+        x = g->p.y;
+        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+        break;
+    case GDISP_ROTATE_180:
+        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+        break;
+    case GDISP_ROTATE_270:
+        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+        y = g->p.x;
+        break;
+    }
+    return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
+}
+#endif
+
+LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
+    uint8_t* buffer = (uint8_t*)g->p.ptr;
+    int linelength = g->p.cx;
+    for (int i = 0; i < g->p.cy; i++) {
+        unsigned dstx = g->p.x;
+        unsigned dsty = g->p.y + i;
+        unsigned srcx = g->p.x1;
+        unsigned srcy = g->p.y1 + i;
+        unsigned srcbit = srcy * g->p.x2 + srcx;
+        for(int j=0; j < linelength; j++) {
+            uint8_t src = buffer[srcbit / 8];
+            uint8_t bit = 7-(srcbit % 8);
+            uint8_t bitset = (src >> bit) & 1;
+            uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
+            if (bitset) {
+                *dst |= xybit(dsty);
+            }
+            else {
+                *dst &= ~xybit(dsty);
+            }
+			dstx++;
+            srcbit++;
+        }
+    }
+    g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+LLDSPEC void gdisp_lld_control(GDisplay *g) {
+    switch(g->p.x) {
+    case GDISP_CONTROL_POWER:
+        if (g->g.Powermode == (powermode_t)g->p.ptr)
+            return;
+        switch((powermode_t)g->p.ptr) {
+        case powerOff:
+        case powerSleep:
+        case powerDeepSleep:
+            acquire_bus(g);
+            enter_cmd_mode(g);
+            write_cmd(g, ST7565_DISPLAY_OFF);
+            flush_cmd(g);
+            release_bus(g);
+            break;
+        case powerOn:
+            acquire_bus(g);
+            enter_cmd_mode(g);
+            write_cmd(g, ST7565_DISPLAY_ON);
+            flush_cmd(g);
+            release_bus(g);
+            break;
+        default:
+            return;
+        }
+        g->g.Powermode = (powermode_t)g->p.ptr;
+        return;
+
+        case GDISP_CONTROL_ORIENTATION:
+            if (g->g.Orientation == (orientation_t)g->p.ptr)
+                return;
+            switch((orientation_t)g->p.ptr) {
+            /* Rotation is handled by the drawing routines */
+            case GDISP_ROTATE_0:
+            case GDISP_ROTATE_180:
+                g->g.Height = GDISP_SCREEN_HEIGHT;
+                g->g.Width = GDISP_SCREEN_WIDTH;
+                break;
+            case GDISP_ROTATE_90:
+            case GDISP_ROTATE_270:
+                g->g.Height = GDISP_SCREEN_WIDTH;
+                g->g.Width = GDISP_SCREEN_HEIGHT;
+                break;
+            default:
+                return;
+            }
+            g->g.Orientation = (orientation_t)g->p.ptr;
+            return;
+
+            case GDISP_CONTROL_CONTRAST:
+                g->g.Contrast = (unsigned)g->p.ptr & 63;
+                acquire_bus(g);
+                enter_cmd_mode(g);
+                write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
+                flush_cmd(g);
+                release_bus(g);
+                return;
+    }
+}
+#endif // GDISP_NEED_CONTROL
+
+#endif // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h
new file mode 100644
index 000000000..2b66a877c
--- /dev/null
+++ b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support.                                                  */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH            TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL        TRUE
+#define GDISP_HARDWARE_PIXELREAD        TRUE
+#define GDISP_HARDWARE_CONTROL          TRUE
+#define GDISP_HARDWARE_BITFILLS         TRUE
+
+#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
+
+#endif	/* GFX_USE_GDISP */
+
+#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565ergodox/st7565.h b/drivers/ugfx/gdisp/st7565ergodox/st7565.h
new file mode 100644
index 000000000..24924ff05
--- /dev/null
+++ b/drivers/ugfx/gdisp/st7565ergodox/st7565.h
@@ -0,0 +1,39 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _ST7565_H
+#define _ST7565_H
+
+#define ST7565_CONTRAST             0x81
+#define ST7565_ALLON_NORMAL         0xA4
+#define ST7565_ALLON                0xA5
+#define ST7565_POSITIVE_DISPLAY     0xA6
+#define ST7565_INVERT_DISPLAY       0xA7
+#define ST7565_DISPLAY_OFF          0xAE
+#define ST7565_DISPLAY_ON           0xAF
+
+#define ST7565_LCD_BIAS_7           0xA3
+#define ST7565_LCD_BIAS_9           0xA2
+
+#define ST7565_ADC_NORMAL           0xA0
+#define ST7565_ADC_REVERSE          0xA1
+
+#define ST7565_COM_SCAN_INC         0xC0
+#define ST7565_COM_SCAN_DEC         0xC8
+
+#define ST7565_START_LINE           0x40
+#define ST7565_PAGE                 0xB0
+#define ST7565_COLUMN_MSB           0x10
+#define ST7565_COLUMN_LSB           0x00
+#define ST7565_RMW                  0xE0
+
+#define ST7565_RESISTOR_RATIO       0x20
+#define ST7565_POWER_CONTROL        0x28
+
+#define ST7565_RESET                0xE2
+
+#endif /* _ST7565_H */
diff --git a/keyboards/ergodox/infinity/board_IS31FL3731C.h b/keyboards/ergodox/infinity/board_IS31FL3731C.h
new file mode 100644
index 000000000..2ea73f1fb
--- /dev/null
+++ b/keyboards/ergodox/infinity/board_IS31FL3731C.h
@@ -0,0 +1,113 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+  400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+#define GDISP_SCREEN_WIDTH  7
+#define GDISP_SCREEN_HEIGHT 7
+
+static const uint8_t led_mask[] = {
+	0xFF, 0x00, /* C1-1 -> C1-16 */
+	0xFF, 0x00, /* C2-1 -> C2-16 */
+	0xFF, 0x00, /* C3-1 -> C3-16 */
+	0xFF, 0x00, /* C4-1 -> C4-16 */
+	0x3F, 0x00, /* C5-1 -> C5-16 */
+	0x00, 0x00, /* C6-1 -> C6-16 */
+	0x00, 0x00, /* C7-1 -> C7-16 */
+	0x00, 0x00, /* C8-1 -> C8-16 */
+	0x00, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+//   45        44        43        42        41        40        39
+   { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+//   52        51        50        49        48        47        46
+   { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
+//   58        57        56        55        54        53        N/A
+   { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
+//   67        66        65        64        63        62        61
+   { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
+//   76        75        74        73        72        60        59
+   { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
+//   N/A       N/A       N/A       N/A       N/A       N/A       68
+   { NA,       NA,       NA,       NA,       NA,       NA,       LA(5, 4) },
+//   N/A       N/A       N/A       N/A       71        70        69
+   { NA,       NA,       NA,       NA,       LA(6, 2), LA(6, 1), LA(6, 0) },
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    /* I2C pins */
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+    palClearPad(GPIOB, 16);
+    /* start I2C */
+    i2cStart(&I2CD1, &i2ccfg);
+    // try high drive (from kiibohd)
+    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+    // try glitch fixing (from kiibohd)
+    I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+    (void) g;
+    return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+    (void) g;
+    return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+    (void) g;
+    if(!shutdown) {
+        palSetPad(GPIOB, 16);
+    }
+    else {
+        palClearPad(GPIOB, 16);
+    }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/board_ST7565.h b/keyboards/ergodox/infinity/board_ST7565.h
new file mode 100644
index 000000000..9650ffb44
--- /dev/null
+++ b/keyboards/ergodox/infinity/board_ST7565.h
@@ -0,0 +1,113 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
+#define ST7565_ADC              ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER       0,1,2,3
+/*
+ * Custom page order for several LCD boards, e.g. HEM12864-99
+ * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
+ */
+
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
+
+#define palSetPadModeRaw(portname, bits) \
+    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) \
+    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
+// DSPI Clock and Transfer Attributes
+// Frame Size: 8 bits
+// MSB First
+// CLK Low by default
+static const SPIConfig spi1config = {
+   // Operation complete callback or @p NULL.
+  .end_cb = NULL,
+   //The chip select line port - when not using pcs.
+  .ssport = ST7565_GPIOPORT,
+   // brief The chip select line pad number - when not using pcs.
+  .sspad=ST7565_SS_PIN,
+   // SPI initialization data.
+  .tar0 =
+    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
+    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
+    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
+    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
+    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
+};
+
+static GFXINLINE void acquire_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to acquire
+    // spiAcquireBus(&SPID1);
+    spiSelect(&SPID1);
+}
+
+static GFXINLINE void release_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to release
+    //spiReleaseBus(&SPID1);
+    spiUnselect(&SPID1);
+}
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
+
+    spiInit();
+    spiStart(&SPID1, &spi1config);
+    release_bus(g);
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
+    (void) g;
+    if (state) {
+        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+    else {
+        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+}
+
+static GFXINLINE void enter_data_mode(GDisplay *g) {
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+static GFXINLINE void enter_cmd_mode(GDisplay *g) {
+    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	spiSend(&SPID1, length, data);
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
deleted file mode 100644
index 2ea73f1fb..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-static const I2CConfig i2ccfg = {
-  400000 // clock speed (Hz); 400kHz max for IS31
-};
-
-#define GDISP_SCREEN_WIDTH  7
-#define GDISP_SCREEN_HEIGHT 7
-
-static const uint8_t led_mask[] = {
-	0xFF, 0x00, /* C1-1 -> C1-16 */
-	0xFF, 0x00, /* C2-1 -> C2-16 */
-	0xFF, 0x00, /* C3-1 -> C3-16 */
-	0xFF, 0x00, /* C4-1 -> C4-16 */
-	0x3F, 0x00, /* C5-1 -> C5-16 */
-	0x00, 0x00, /* C6-1 -> C6-16 */
-	0x00, 0x00, /* C7-1 -> C7-16 */
-	0x00, 0x00, /* C8-1 -> C8-16 */
-	0x00, 0x00, /* C9-1 -> C9-16 */
-};
-
-// The address of the LED
-#define LA(c, r) (c + r * 16 )
-// Need to be an address that is not mapped, but inside the range of the controller matrix
-#define NA LA(8, 8)
-
-// The numbers in the comments are the led numbers DXX on the PCB
-// The mapping is taken from the schematic of left hand side
-static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-//   45        44        43        42        41        40        39
-   { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
-//   52        51        50        49        48        47        46
-   { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
-//   58        57        56        55        54        53        N/A
-   { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
-//   67        66        65        64        63        62        61
-   { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
-//   76        75        74        73        72        60        59
-   { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
-//   N/A       N/A       N/A       N/A       N/A       N/A       68
-   { NA,       NA,       NA,       NA,       NA,       NA,       LA(5, 4) },
-//   N/A       N/A       N/A       N/A       71        70        69
-   { NA,       NA,       NA,       NA,       LA(6, 2), LA(6, 1), LA(6, 0) },
-};
-
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
-#define IS31_TIMEOUT 5000
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
-    /* I2C pins */
-    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
-    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
-    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
-    palClearPad(GPIOB, 16);
-    /* start I2C */
-    i2cStart(&I2CD1, &i2ccfg);
-    // try high drive (from kiibohd)
-    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
-    // try glitch fixing (from kiibohd)
-    I2CD1.i2c->FLT = 4;
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
-    (void) g;
-    return led_mask;
-}
-
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
-    (void) g;
-    return led_mapping[y][x];
-}
-
-static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
-    (void) g;
-    if(!shutdown) {
-        palSetPad(GPIOB, 16);
-    }
-    else {
-        palClearPad(GPIOB, 16);
-    }
-}
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk
deleted file mode 100644
index f32d0d868..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/IS31FL3731C
-GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
deleted file mode 100644
index b4a5c84b0..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_ERGODOX
-#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_IS31FL3731C.h"
-
-
-// Can't include led_tables from here
-extern const uint8_t CIE1931_CURVE[];
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-	#define GDISP_SCREEN_HEIGHT		9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-	#define GDISP_SCREEN_WIDTH		16
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-	#define GDISP_INITIAL_CONTRAST	0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-	#define GDISP_INITIAL_BACKLIGHT	0
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG  0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
-
-#define IS31_FRAME_SIZE 0xB4
-
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
-
-#define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
-
-#define IS31
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    uint8_t write_buffer_offset;
-    uint8_t write_buffer[IS31_FRAME_SIZE];
-    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
-    uint8_t page;
-}__attribute__((__packed__)) PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = IS31_COMMANDREGISTER;
-    tx[1] = page;
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = reg;
-    tx[1] = data;
-    write_page(g, page);
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
-    PRIV(g)->write_buffer_offset = offset;
-    write_page(g, page);
-    write_data(g, (uint8_t*)PRIV(g), length + 1);
-}
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-	// The private area is the display surface.
-	g->priv = gfxAlloc(sizeof(PrivData));
-    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
-	PRIV(g)->page = 0;
-
-	// Initialise the board interface
-	init_board(g);
-	gfxSleepMilliseconds(10);
-
-    // zero function page, all registers (assuming full_page is all zeroes)
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    set_hardware_shutdown(g, false);
-    gfxSleepMilliseconds(10);
-    // software shutdown
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-    // zero function page, all registers
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    gfxSleepMilliseconds(10);
-
-
-    // zero all LED registers on all 8 pages, and enable the mask
-    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
-    for(uint8_t i=0; i<8; i++) {
-        write_ram(g, i, 0, IS31_FRAME_SIZE);
-        gfxSleepMilliseconds(1);
-    }
-
-    // software shutdown disable (i.e. turn stuff on)
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-
-    // Finish Init
-    post_init_board(g);
-
-	/* Initialise the GDISP structure */
-	g->g.Width = GDISP_SCREEN_WIDTH;
-	g->g.Height = GDISP_SCREEN_HEIGHT;
-	g->g.Orientation = GDISP_ROTATE_0;
-	g->g.Powermode = powerOff;
-	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-	g->g.Contrast = GDISP_INITIAL_CONTRAST;
-	return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-		// Don't flush if we don't need it.
-		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-			return;
-
-		PRIV(g)->page++;
-		PRIV(g)->page %= 2;
-		// TODO: some smarter algorithm for this
-		// We should run only one physical page at a time
-		// This way we don't need to send so much data, and
-		// we could use slightly less memory
-		uint8_t* src = PRIV(g)->frame_buffer;
-		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-		        ++src;
-		    }
-		}
-        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
-        gfxSleepMilliseconds(1);
-        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
-		g->flags &= ~GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-		g->flags |= GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
-	}
-#endif
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-	LLDSPEC void gdisp_lld_control(GDisplay *g) {
-		switch(g->p.x) {
-		case GDISP_CONTROL_POWER:
-			if (g->g.Powermode == (powermode_t)g->p.ptr)
-				return;
-			switch((powermode_t)g->p.ptr) {
-			case powerOff:
-			case powerSleep:
-			case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-				break;
-			case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-				break;
-			default:
-				return;
-			}
-			g->g.Powermode = (powermode_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_ORIENTATION:
-			if (g->g.Orientation == (orientation_t)g->p.ptr)
-				return;
-			switch((orientation_t)g->p.ptr) {
-			/* Rotation is handled by the drawing routines */
-			case GDISP_ROTATE_0:
-			case GDISP_ROTATE_180:
-				g->g.Height = GDISP_SCREEN_HEIGHT;
-				g->g.Width = GDISP_SCREEN_WIDTH;
-				break;
-			case GDISP_ROTATE_90:
-			case GDISP_ROTATE_270:
-				g->g.Height = GDISP_SCREEN_WIDTH;
-				g->g.Width = GDISP_SCREEN_HEIGHT;
-				break;
-			default:
-				return;
-			}
-			g->g.Orientation = (orientation_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_BACKLIGHT:
-		    if (g->g.Backlight == (unsigned)g->p.ptr)
-                return;
-		    unsigned val = (unsigned)g->p.ptr;
-		    g->g.Backlight = val > 100 ? 100 : val;
-            g->flags |= GDISP_FLG_NEEDFLUSH;
-		    return;
-		}
-	}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
deleted file mode 100644
index bb28ad775..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL		TRUE
-#define GDISP_HARDWARE_PIXELREAD		TRUE
-#define GDISP_HARDWARE_CONTROL			TRUE
-
-#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
deleted file mode 100644
index 9650ffb44..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER       0,1,2,3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
- */
-
-#define ST7565_GPIOPORT GPIOC
-#define ST7565_PORT PORTC
-#define ST7565_A0_PIN 7
-#define ST7565_RST_PIN 8
-#define ST7565_MOSI_PIN 6
-#define ST7565_SLCK_PIN 5
-#define ST7565_SS_PIN 4
-
-#define palSetPadModeRaw(portname, bits) \
-    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
-
-#define palSetPadModeNamed(portname, portmode) \
-    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
-
-#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
-   // Operation complete callback or @p NULL.
-  .end_cb = NULL,
-   //The chip select line port - when not using pcs.
-  .ssport = ST7565_GPIOPORT,
-   // brief The chip select line pad number - when not using pcs.
-  .sspad=ST7565_SS_PIN,
-   // SPI initialization data.
-  .tar0 =
-    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
-    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
-    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
-    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
-    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void) g;
-    // Only the LCD is using the SPI bus, so no need to acquire
-    // spiAcquireBus(&SPID1);
-    spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
-    (void) g;
-    // Only the LCD is using the SPI bus, so no need to release
-    //spiReleaseBus(&SPID1);
-    spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
-    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
-    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
-    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
-
-    spiInit();
-    spiStart(&SPID1, &spi1config);
-    release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void) g;
-    if (state) {
-        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-    else {
-        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-}
-
-static GFXINLINE void enter_data_mode(GDisplay *g) {
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
-    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
deleted file mode 100644
index 889a1a031..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/st7565ergodox
-GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
deleted file mode 100644
index b04ad0293..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_ERGODOX
-#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_ST7565.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT		32
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH		128
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST	35
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT	100
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#include "drivers/gdisp/st7565ergodox/st7565.h"
-
-/*===========================================================================*/
-/* Driver config defaults for backward compatibility.               	     */
-/*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
-#define ST7565_PAGE_ORDER       0,1,2,3
-#endif
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    bool_t buffer2;
-    uint8_t data_pos;
-    uint8_t data[16];
-    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-#define RAM(g)							(PRIV(g)->ram)
-
-static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
-    PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
-}
-
-static GFXINLINE void flush_cmd(GDisplay* g) {
-    write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
-    PRIV(g)->data_pos = 0;
-}
-
-#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
-
-// Some common routines and macros
-#define delay(us)			gfxSleepMicroseconds(us)
-#define delay_ms(ms)		gfxSleepMilliseconds(ms)
-
-#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y)			(1<<((y)&7))
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-/*
- * As this controller can't update on a pixel boundary we need to maintain the
- * the entire display surface in memory so that we can do the necessary bit
- * operations. Fortunately it is a small display in monochrome.
- * 64 * 128 / 8 = 1024 bytes.
- */
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-    // The private area is the display surface.
-    g->priv = gfxAlloc(sizeof(PrivData));
-    PRIV(g)->buffer2 = false;
-    PRIV(g)->data_pos = 0;
-
-    // Initialise the board interface
-    init_board(g);
-
-    // Hardware reset
-    setpin_reset(g, TRUE);
-    gfxSleepMilliseconds(20);
-    setpin_reset(g, FALSE);
-    gfxSleepMilliseconds(20);
-    acquire_bus(g);
-    enter_cmd_mode(g);
-
-    write_cmd(g, ST7565_RESET);
-    write_cmd(g, ST7565_LCD_BIAS);
-    write_cmd(g, ST7565_ADC);
-    write_cmd(g, ST7565_COM_SCAN);
-
-    write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
-    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
-
-    // turn on internal power supply (VC=1, VR=1, VF=1)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x07);
-
-    write_cmd(g, ST7565_INVERT_DISPLAY);
-    write_cmd(g, ST7565_ALLON_NORMAL);
-
-    write_cmd(g, ST7565_START_LINE | 0);
-    write_cmd(g, ST7565_RMW);
-    flush_cmd(g);
-
-    // Finish Init
-    post_init_board(g);
-
-    // Release the bus
-    release_bus(g);
-
-    /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
-    g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
-    return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned	p;
-
-    // Don't flush if we don't need it.
-    if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-        return;
-
-    acquire_bus(g);
-    enter_cmd_mode(g);
-    unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
-    for (p = 0; p < 4; p++) {
-        write_cmd(g, ST7565_PAGE | (p + dstOffset));
-        write_cmd(g, ST7565_COLUMN_MSB | 0);
-        write_cmd(g, ST7565_COLUMN_LSB | 0);
-        write_cmd(g, ST7565_RMW);
-        flush_cmd(g);
-        enter_data_mode(g);
-        write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
-        enter_cmd_mode(g);
-    }
-    unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
-    write_cmd(g, ST7565_START_LINE | line);
-    flush_cmd(g);
-    PRIV(g)->buffer2 = !PRIV(g)->buffer2;
-    release_bus(g);
-
-    g->flags &= ~GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t		x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
-    }
-    if (gdispColor2Native(g->p.color) != Black)
-        RAM(g)[xyaddr(x, y)] |= xybit(y);
-    else
-        RAM(g)[xyaddr(x, y)] &= ~xybit(y);
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t		x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
-    }
-    return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
-}
-#endif
-
-LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
-    uint8_t* buffer = (uint8_t*)g->p.ptr;
-    int linelength = g->p.cx;
-    for (int i = 0; i < g->p.cy; i++) {
-        unsigned dstx = g->p.x;
-        unsigned dsty = g->p.y + i;
-        unsigned srcx = g->p.x1;
-        unsigned srcy = g->p.y1 + i;
-        unsigned srcbit = srcy * g->p.x2 + srcx;
-        for(int j=0; j < linelength; j++) {
-            uint8_t src = buffer[srcbit / 8];
-            uint8_t bit = 7-(srcbit % 8);
-            uint8_t bitset = (src >> bit) & 1;
-            uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
-            if (bitset) {
-                *dst |= xybit(dsty);
-            }
-            else {
-                *dst &= ~xybit(dsty);
-            }
-			dstx++;
-            srcbit++;
-        }
-    }
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-LLDSPEC void gdisp_lld_control(GDisplay *g) {
-    switch(g->p.x) {
-    case GDISP_CONTROL_POWER:
-        if (g->g.Powermode == (powermode_t)g->p.ptr)
-            return;
-        switch((powermode_t)g->p.ptr) {
-        case powerOff:
-        case powerSleep:
-        case powerDeepSleep:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_OFF);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        case powerOn:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_ON);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        default:
-            return;
-        }
-        g->g.Powermode = (powermode_t)g->p.ptr;
-        return;
-
-        case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
-            }
-            g->g.Orientation = (orientation_t)g->p.ptr;
-            return;
-
-            case GDISP_CONTROL_CONTRAST:
-                g->g.Contrast = (unsigned)g->p.ptr & 63;
-                acquire_bus(g);
-                enter_cmd_mode(g);
-                write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
-                flush_cmd(g);
-                release_bus(g);
-                return;
-    }
-}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
deleted file mode 100644
index 2b66a877c..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH            TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
-#define GDISP_HARDWARE_BITFILLS         TRUE
-
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
deleted file mode 100644
index 24924ff05..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _ST7565_H
-#define _ST7565_H
-
-#define ST7565_CONTRAST             0x81
-#define ST7565_ALLON_NORMAL         0xA4
-#define ST7565_ALLON                0xA5
-#define ST7565_POSITIVE_DISPLAY     0xA6
-#define ST7565_INVERT_DISPLAY       0xA7
-#define ST7565_DISPLAY_OFF          0xAE
-#define ST7565_DISPLAY_ON           0xAF
-
-#define ST7565_LCD_BIAS_7           0xA3
-#define ST7565_LCD_BIAS_9           0xA2
-
-#define ST7565_ADC_NORMAL           0xA0
-#define ST7565_ADC_REVERSE          0xA1
-
-#define ST7565_COM_SCAN_INC         0xC0
-#define ST7565_COM_SCAN_DEC         0xC8
-
-#define ST7565_START_LINE           0x40
-#define ST7565_PAGE                 0xB0
-#define ST7565_COLUMN_MSB           0x10
-#define ST7565_COLUMN_LSB           0x00
-#define ST7565_RMW                  0xE0
-
-#define ST7565_RESISTOR_RATIO       0x20
-#define ST7565_POWER_CONTROL        0x28
-
-#define ST7565_RESET                0xE2
-
-#endif /* _ST7565_H */
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
index bbb0f6efe..9e2246363 100644
--- a/keyboards/ergodox/infinity/rules.mk
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -67,5 +67,5 @@ LCD_BACKLIGHT_ENABLE = yes
 MIDI_ENABLE = no
 RGBLIGHT_ENABLE = no
 
-include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
-include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
\ No newline at end of file
+include $(TOP_DIR)/drivers/ugfx/gdisp/st7565ergodox/driver.mk
+include $(TOP_DIR)/drivers/ugfx/gdisp/IS31FL3731C/driver.mk
\ No newline at end of file
diff --git a/keyboards/whitefox/board_IS31FL3731C.h b/keyboards/whitefox/board_IS31FL3731C.h
new file mode 100644
index 000000000..3dc5327a5
--- /dev/null
+++ b/keyboards/whitefox/board_IS31FL3731C.h
@@ -0,0 +1,109 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+  400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+#define GDISP_SCREEN_WIDTH  16
+#define GDISP_SCREEN_HEIGHT 5
+
+static const uint8_t led_mask[] = {
+	0xFF, 0x00, /* C1-1 -> C1-16 */
+	0xFF, 0x00, /* C2-1 -> C2-16 */
+	0xFF, 0x00, /* C3-1 -> C3-16 */
+	0xFF, 0x00, /* C4-1 -> C4-16 */
+	0xFF, 0x00, /* C5-1 -> C5-16 */
+	0xFF, 0x00, /* C6-1 -> C6-16 */
+	0xFF, 0x00, /* C7-1 -> C7-16 */
+	0xFF, 0x00, /* C8-1 -> C8-16 */
+	0xFE, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+//   1         2         3         4         5         6         7         8         9         10        11        12        13        14        15        16
+   { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
+//   17        18        19        20        21        22        23        24        25        26                  27        28        29        30        31
+   { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA,       LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
+//   32        33        34        35        36        37        38        39        40        41                  42        43        44        45        46
+   { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA,       LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
+//   47        48        49        50        51        52        53        54        55        56                  57        58        59        60        61
+   { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA,       LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
+//   62        63        64                                      65                                      66        67        68        69        70        71
+   { LA(5, 7), LA(6, 7), LA(7, 7), NA,       NA,       NA,       LA(0, 8), NA,       NA,       NA,       LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    /* I2C pins */
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+    palClearPad(GPIOB, 16);
+    /* start I2C */
+    i2cStart(&I2CD1, &i2ccfg);
+    // try high drive (from kiibohd)
+    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+    // try glitch fixing (from kiibohd)
+    I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+    (void) g;
+    return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+    (void) g;
+    return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+    (void) g;
+    if(!shutdown) {
+        palSetPad(GPIOB, 16);
+    }
+    else {
+        palClearPad(GPIOB, 16);
+    }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
deleted file mode 100644
index 3dc5327a5..000000000
--- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-static const I2CConfig i2ccfg = {
-  400000 // clock speed (Hz); 400kHz max for IS31
-};
-
-#define GDISP_SCREEN_WIDTH  16
-#define GDISP_SCREEN_HEIGHT 5
-
-static const uint8_t led_mask[] = {
-	0xFF, 0x00, /* C1-1 -> C1-16 */
-	0xFF, 0x00, /* C2-1 -> C2-16 */
-	0xFF, 0x00, /* C3-1 -> C3-16 */
-	0xFF, 0x00, /* C4-1 -> C4-16 */
-	0xFF, 0x00, /* C5-1 -> C5-16 */
-	0xFF, 0x00, /* C6-1 -> C6-16 */
-	0xFF, 0x00, /* C7-1 -> C7-16 */
-	0xFF, 0x00, /* C8-1 -> C8-16 */
-	0xFE, 0x00, /* C9-1 -> C9-16 */
-};
-
-// The address of the LED
-#define LA(c, r) (c + r * 16 )
-// Need to be an address that is not mapped, but inside the range of the controller matrix
-#define NA LA(8, 8)
-
-// The numbers in the comments are the led numbers DXX on the PCB
-// The mapping is taken from the schematic of left hand side
-static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-//   1         2         3         4         5         6         7         8         9         10        11        12        13        14        15        16
-   { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
-//   17        18        19        20        21        22        23        24        25        26                  27        28        29        30        31
-   { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA,       LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
-//   32        33        34        35        36        37        38        39        40        41                  42        43        44        45        46
-   { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA,       LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
-//   47        48        49        50        51        52        53        54        55        56                  57        58        59        60        61
-   { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA,       LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
-//   62        63        64                                      65                                      66        67        68        69        70        71
-   { LA(5, 7), LA(6, 7), LA(7, 7), NA,       NA,       NA,       LA(0, 8), NA,       NA,       NA,       LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
-};
-
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
-#define IS31_TIMEOUT 5000
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
-    /* I2C pins */
-    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
-    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
-    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
-    palClearPad(GPIOB, 16);
-    /* start I2C */
-    i2cStart(&I2CD1, &i2ccfg);
-    // try high drive (from kiibohd)
-    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
-    // try glitch fixing (from kiibohd)
-    I2CD1.i2c->FLT = 4;
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
-    (void) g;
-    return led_mask;
-}
-
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
-    (void) g;
-    return led_mapping[y][x];
-}
-
-static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
-    (void) g;
-    if(!shutdown) {
-        palSetPad(GPIOB, 16);
-    }
-    else {
-        palClearPad(GPIOB, 16);
-    }
-}
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk
deleted file mode 100644
index f32d0d868..000000000
--- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/IS31FL3731C
-GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
deleted file mode 100644
index c807cbd1e..000000000
--- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_WHITEFOX
-#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_IS31FL3731C.h"
-
-
-// Can't include led_tables from here
-extern const uint8_t CIE1931_CURVE[];
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-	#define GDISP_SCREEN_HEIGHT		9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-	#define GDISP_SCREEN_WIDTH		16
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-	#define GDISP_INITIAL_CONTRAST	0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-	#define GDISP_INITIAL_BACKLIGHT	0
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG  0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
-
-#define IS31_FRAME_SIZE 0xB4
-
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
-
-#define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
-
-#define IS31
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    uint8_t write_buffer_offset;
-    uint8_t write_buffer[IS31_FRAME_SIZE];
-    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
-    uint8_t page;
-}__attribute__((__packed__)) PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = IS31_COMMANDREGISTER;
-    tx[1] = page;
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = reg;
-    tx[1] = data;
-    write_page(g, page);
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
-    PRIV(g)->write_buffer_offset = offset;
-    write_page(g, page);
-    write_data(g, (uint8_t*)PRIV(g), length + 1);
-}
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-	// The private area is the display surface.
-	g->priv = gfxAlloc(sizeof(PrivData));
-    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
-	PRIV(g)->page = 0;
-
-	// Initialise the board interface
-	init_board(g);
-	gfxSleepMilliseconds(10);
-
-    // zero function page, all registers (assuming full_page is all zeroes)
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    set_hardware_shutdown(g, false);
-    gfxSleepMilliseconds(10);
-    // software shutdown
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-    // zero function page, all registers
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    gfxSleepMilliseconds(10);
-
-
-    // zero all LED registers on all 8 pages, and enable the mask
-    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
-    for(uint8_t i=0; i<8; i++) {
-        write_ram(g, i, 0, IS31_FRAME_SIZE);
-        gfxSleepMilliseconds(1);
-    }
-
-    // software shutdown disable (i.e. turn stuff on)
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-
-    // Finish Init
-    post_init_board(g);
-
-	/* Initialise the GDISP structure */
-	g->g.Width = GDISP_SCREEN_WIDTH;
-	g->g.Height = GDISP_SCREEN_HEIGHT;
-	g->g.Orientation = GDISP_ROTATE_0;
-	g->g.Powermode = powerOff;
-	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-	g->g.Contrast = GDISP_INITIAL_CONTRAST;
-	return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-		// Don't flush if we don't need it.
-		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-			return;
-
-		PRIV(g)->page++;
-		PRIV(g)->page %= 2;
-		// TODO: some smarter algorithm for this
-		// We should run only one physical page at a time
-		// This way we don't need to send so much data, and
-		// we could use slightly less memory
-		uint8_t* src = PRIV(g)->frame_buffer;
-		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-		        ++src;
-		    }
-		}
-        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
-        gfxSleepMilliseconds(1);
-        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
-		g->flags &= ~GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-		g->flags |= GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
-	}
-#endif
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-	LLDSPEC void gdisp_lld_control(GDisplay *g) {
-		switch(g->p.x) {
-		case GDISP_CONTROL_POWER:
-			if (g->g.Powermode == (powermode_t)g->p.ptr)
-				return;
-			switch((powermode_t)g->p.ptr) {
-			case powerOff:
-			case powerSleep:
-			case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-				break;
-			case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-				break;
-			default:
-				return;
-			}
-			g->g.Powermode = (powermode_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_ORIENTATION:
-			if (g->g.Orientation == (orientation_t)g->p.ptr)
-				return;
-			switch((orientation_t)g->p.ptr) {
-			/* Rotation is handled by the drawing routines */
-			case GDISP_ROTATE_0:
-			case GDISP_ROTATE_180:
-				g->g.Height = GDISP_SCREEN_HEIGHT;
-				g->g.Width = GDISP_SCREEN_WIDTH;
-				break;
-			case GDISP_ROTATE_90:
-			case GDISP_ROTATE_270:
-				g->g.Height = GDISP_SCREEN_WIDTH;
-				g->g.Width = GDISP_SCREEN_HEIGHT;
-				break;
-			default:
-				return;
-			}
-			g->g.Orientation = (orientation_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_BACKLIGHT:
-		    if (g->g.Backlight == (unsigned)g->p.ptr)
-                return;
-		    unsigned val = (unsigned)g->p.ptr;
-		    g->g.Backlight = val > 100 ? 100 : val;
-            g->flags |= GDISP_FLG_NEEDFLUSH;
-		    return;
-		}
-	}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
deleted file mode 100644
index bb28ad775..000000000
--- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL		TRUE
-#define GDISP_HARDWARE_PIXELREAD		TRUE
-#define GDISP_HARDWARE_CONTROL			TRUE
-
-#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk
index fb34dbb9a..4cf23a390 100644
--- a/keyboards/whitefox/rules.mk
+++ b/keyboards/whitefox/rules.mk
@@ -70,4 +70,4 @@ CUSTOM_MATRIX = yes # Custom matrix file
 BACKLIGHT_ENABLE = yes
 VISUALIZER_ENABLE = yes
 
-include $(KEYBOARD_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
+include $(TOP_DIR)/drivers/ugfx/gdisp/IS31FL3731C/driver.mk
-- 
cgit v1.2.3-70-g09d2


From 630f065376618d94f4616687629aadb3ee91e562 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 9 Jul 2017 13:37:24 +0300
Subject: Remove ergodox from gdisp driver names

---
 drivers/ugfx/gdisp/IS31FL3731C/driver.mk           |   2 -
 drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c | 312 -------------------
 drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h  |  36 ---
 drivers/ugfx/gdisp/is31fl3731c/driver.mk           |   2 +
 drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c | 312 +++++++++++++++++++
 drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h  |  36 +++
 drivers/ugfx/gdisp/st7565/driver.mk                |   2 +
 drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c       | 329 +++++++++++++++++++++
 drivers/ugfx/gdisp/st7565/gdisp_lld_config.h       |  27 ++
 drivers/ugfx/gdisp/st7565/st7565.h                 |  39 +++
 drivers/ugfx/gdisp/st7565ergodox/driver.mk         |   2 -
 .../ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c    | 329 ---------------------
 .../ugfx/gdisp/st7565ergodox/gdisp_lld_config.h    |  27 --
 drivers/ugfx/gdisp/st7565ergodox/st7565.h          |  39 ---
 keyboards/ergodox/infinity/gfxconf.h               |   2 +-
 keyboards/ergodox/infinity/rules.mk                |   4 +-
 keyboards/whitefox/gfxconf.h                       |   2 +-
 keyboards/whitefox/rules.mk                        |   2 +-
 18 files changed, 752 insertions(+), 752 deletions(-)
 delete mode 100644 drivers/ugfx/gdisp/IS31FL3731C/driver.mk
 delete mode 100644 drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
 delete mode 100644 drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h
 create mode 100644 drivers/ugfx/gdisp/is31fl3731c/driver.mk
 create mode 100644 drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
 create mode 100644 drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
 create mode 100644 drivers/ugfx/gdisp/st7565/driver.mk
 create mode 100644 drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
 create mode 100644 drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
 create mode 100644 drivers/ugfx/gdisp/st7565/st7565.h
 delete mode 100644 drivers/ugfx/gdisp/st7565ergodox/driver.mk
 delete mode 100644 drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c
 delete mode 100644 drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h
 delete mode 100644 drivers/ugfx/gdisp/st7565ergodox/st7565.h

(limited to 'keyboards')

diff --git a/drivers/ugfx/gdisp/IS31FL3731C/driver.mk b/drivers/ugfx/gdisp/IS31FL3731C/driver.mk
deleted file mode 100644
index 58a16d209..000000000
--- a/drivers/ugfx/gdisp/IS31FL3731C/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/ugfx/gdisp/IS31FL3731C
-GFXSRC += drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
diff --git a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
deleted file mode 100644
index 2d78a5533..000000000
--- a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_ERGODOX
-#include "gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_IS31FL3731C.h"
-
-
-// Can't include led_tables from here
-extern const uint8_t CIE1931_CURVE[];
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-	#define GDISP_SCREEN_HEIGHT		9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-	#define GDISP_SCREEN_WIDTH		16
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-	#define GDISP_INITIAL_CONTRAST	0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-	#define GDISP_INITIAL_BACKLIGHT	0
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG  0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
-
-#define IS31_FRAME_SIZE 0xB4
-
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
-
-#define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
-
-#define IS31
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    uint8_t write_buffer_offset;
-    uint8_t write_buffer[IS31_FRAME_SIZE];
-    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
-    uint8_t page;
-}__attribute__((__packed__)) PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = IS31_COMMANDREGISTER;
-    tx[1] = page;
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = reg;
-    tx[1] = data;
-    write_page(g, page);
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
-    PRIV(g)->write_buffer_offset = offset;
-    write_page(g, page);
-    write_data(g, (uint8_t*)PRIV(g), length + 1);
-}
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-	// The private area is the display surface.
-	g->priv = gfxAlloc(sizeof(PrivData));
-    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
-	PRIV(g)->page = 0;
-
-	// Initialise the board interface
-	init_board(g);
-	gfxSleepMilliseconds(10);
-
-    // zero function page, all registers (assuming full_page is all zeroes)
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    set_hardware_shutdown(g, false);
-    gfxSleepMilliseconds(10);
-    // software shutdown
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-    // zero function page, all registers
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    gfxSleepMilliseconds(10);
-
-
-    // zero all LED registers on all 8 pages, and enable the mask
-    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
-    for(uint8_t i=0; i<8; i++) {
-        write_ram(g, i, 0, IS31_FRAME_SIZE);
-        gfxSleepMilliseconds(1);
-    }
-
-    // software shutdown disable (i.e. turn stuff on)
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-
-    // Finish Init
-    post_init_board(g);
-
-	/* Initialise the GDISP structure */
-	g->g.Width = GDISP_SCREEN_WIDTH;
-	g->g.Height = GDISP_SCREEN_HEIGHT;
-	g->g.Orientation = GDISP_ROTATE_0;
-	g->g.Powermode = powerOff;
-	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-	g->g.Contrast = GDISP_INITIAL_CONTRAST;
-	return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-		// Don't flush if we don't need it.
-		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-			return;
-
-		PRIV(g)->page++;
-		PRIV(g)->page %= 2;
-		// TODO: some smarter algorithm for this
-		// We should run only one physical page at a time
-		// This way we don't need to send so much data, and
-		// we could use slightly less memory
-		uint8_t* src = PRIV(g)->frame_buffer;
-		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-		        ++src;
-		    }
-		}
-        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
-        gfxSleepMilliseconds(1);
-        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
-		g->flags &= ~GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-		g->flags |= GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
-	}
-#endif
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-	LLDSPEC void gdisp_lld_control(GDisplay *g) {
-		switch(g->p.x) {
-		case GDISP_CONTROL_POWER:
-			if (g->g.Powermode == (powermode_t)g->p.ptr)
-				return;
-			switch((powermode_t)g->p.ptr) {
-			case powerOff:
-			case powerSleep:
-			case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-				break;
-			case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-				break;
-			default:
-				return;
-			}
-			g->g.Powermode = (powermode_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_ORIENTATION:
-			if (g->g.Orientation == (orientation_t)g->p.ptr)
-				return;
-			switch((orientation_t)g->p.ptr) {
-			/* Rotation is handled by the drawing routines */
-			case GDISP_ROTATE_0:
-			case GDISP_ROTATE_180:
-				g->g.Height = GDISP_SCREEN_HEIGHT;
-				g->g.Width = GDISP_SCREEN_WIDTH;
-				break;
-			case GDISP_ROTATE_90:
-			case GDISP_ROTATE_270:
-				g->g.Height = GDISP_SCREEN_WIDTH;
-				g->g.Width = GDISP_SCREEN_HEIGHT;
-				break;
-			default:
-				return;
-			}
-			g->g.Orientation = (orientation_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_BACKLIGHT:
-		    if (g->g.Backlight == (unsigned)g->p.ptr)
-                return;
-		    unsigned val = (unsigned)g->p.ptr;
-		    g->g.Backlight = val > 100 ? 100 : val;
-            g->flags |= GDISP_FLG_NEEDFLUSH;
-		    return;
-		}
-	}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h
deleted file mode 100644
index bb28ad775..000000000
--- a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL		TRUE
-#define GDISP_HARDWARE_PIXELREAD		TRUE
-#define GDISP_HARDWARE_CONTROL			TRUE
-
-#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/is31fl3731c/driver.mk b/drivers/ugfx/gdisp/is31fl3731c/driver.mk
new file mode 100644
index 000000000..c9de62d1e
--- /dev/null
+++ b/drivers/ugfx/gdisp/is31fl3731c/driver.mk
@@ -0,0 +1,2 @@
+GFXINC += drivers/ugfx/gdisp/is31fl3731c
+GFXSRC += drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
new file mode 100644
index 000000000..c55dd0a0e
--- /dev/null
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
@@ -0,0 +1,312 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_QMK
+#include "gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_IS31FL3731C.h"
+
+
+// Can't include led_tables from here
+extern const uint8_t CIE1931_CURVE[];
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+#ifndef GDISP_SCREEN_HEIGHT
+	#define GDISP_SCREEN_HEIGHT		9
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+	#define GDISP_SCREEN_WIDTH		16
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+	#define GDISP_INITIAL_CONTRAST	0
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+	#define GDISP_INITIAL_BACKLIGHT	0
+#endif
+
+#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+
+#define IS31_ADDR_DEFAULT 0x74
+
+#define IS31_REG_CONFIG  0x00
+// bits in reg
+#define IS31_REG_CONFIG_PICTUREMODE 0x00
+#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
+// D2:D0 bits are starting frame for autoplay mode
+
+#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
+
+#define IS31_REG_AUTOPLAYCTRL1 0x02
+// D6:D4 number of loops (000=infty)
+// D2:D0 number of frames to be used
+
+#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
+
+#define IS31_REG_DISPLAYOPT 0x05
+#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
+#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+// D2:D0 bits blink period time (*0.27s)
+
+#define IS31_REG_AUDIOSYNC 0x06
+#define IS31_REG_AUDIOSYNC_ENABLE 0x1
+
+#define IS31_REG_FRAMESTATE 0x07
+
+#define IS31_REG_BREATHCTRL1 0x08
+// D6:D4 fade out time (26ms*2^i)
+// D2:D0 fade in time (26ms*2^i)
+
+#define IS31_REG_BREATHCTRL2 0x09
+#define IS31_REG_BREATHCTRL2_ENABLE 0x10
+// D2:D0 extinguish time (3.5ms*2^i)
+
+#define IS31_REG_SHUTDOWN 0x0A
+#define IS31_REG_SHUTDOWN_OFF 0x0
+#define IS31_REG_SHUTDOWN_ON 0x1
+
+#define IS31_REG_AGCCTRL 0x0B
+#define IS31_REG_ADCRATE 0x0C
+
+#define IS31_COMMANDREGISTER 0xFD
+#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+#define IS31_FUNCTIONREG_SIZE 0xD
+
+#define IS31_FRAME_SIZE 0xB4
+
+#define IS31_PWM_REG 0x24
+#define IS31_PWM_SIZE 0x90
+
+#define IS31_LED_MASK_SIZE 0x12
+#define IS31_SCREEN_WIDTH 16
+
+#define IS31
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+typedef struct{
+    uint8_t write_buffer_offset;
+    uint8_t write_buffer[IS31_FRAME_SIZE];
+    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
+    uint8_t page;
+}__attribute__((__packed__)) PrivData;
+
+// Some common routines and macros
+#define PRIV(g)                         ((PrivData*)g->priv)
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+
+static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
+    uint8_t tx[2] __attribute__((aligned(2)));
+    tx[0] = IS31_COMMANDREGISTER;
+    tx[1] = page;
+    write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
+    uint8_t tx[2] __attribute__((aligned(2)));
+    tx[0] = reg;
+    tx[1] = data;
+    write_page(g, page);
+    write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
+    PRIV(g)->write_buffer_offset = offset;
+    write_page(g, page);
+    write_data(g, (uint8_t*)PRIV(g), length + 1);
+}
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+	// The private area is the display surface.
+	g->priv = gfxAlloc(sizeof(PrivData));
+    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
+	PRIV(g)->page = 0;
+
+	// Initialise the board interface
+	init_board(g);
+	gfxSleepMilliseconds(10);
+
+    // zero function page, all registers (assuming full_page is all zeroes)
+    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+    set_hardware_shutdown(g, false);
+    gfxSleepMilliseconds(10);
+    // software shutdown
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+    gfxSleepMilliseconds(10);
+    // zero function page, all registers
+    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+    gfxSleepMilliseconds(10);
+
+
+    // zero all LED registers on all 8 pages, and enable the mask
+    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
+    for(uint8_t i=0; i<8; i++) {
+        write_ram(g, i, 0, IS31_FRAME_SIZE);
+        gfxSleepMilliseconds(1);
+    }
+
+    // software shutdown disable (i.e. turn stuff on)
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+    gfxSleepMilliseconds(10);
+
+    // Finish Init
+    post_init_board(g);
+
+	/* Initialise the GDISP structure */
+	g->g.Width = GDISP_SCREEN_WIDTH;
+	g->g.Height = GDISP_SCREEN_HEIGHT;
+	g->g.Orientation = GDISP_ROTATE_0;
+	g->g.Powermode = powerOff;
+	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+	g->g.Contrast = GDISP_INITIAL_CONTRAST;
+	return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+		// Don't flush if we don't need it.
+		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+			return;
+
+		PRIV(g)->page++;
+		PRIV(g)->page %= 2;
+		// TODO: some smarter algorithm for this
+		// We should run only one physical page at a time
+		// This way we don't need to send so much data, and
+		// we could use slightly less memory
+		uint8_t* src = PRIV(g)->frame_buffer;
+		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
+		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
+		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
+		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
+		        ++src;
+		    }
+		}
+        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
+        gfxSleepMilliseconds(1);
+        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
+
+		g->flags &= ~GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = g->p.y;
+			break;
+		}
+		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+		g->flags |= GDISP_FLG_NEEDFLUSH;
+	}
+#endif
+
+#if GDISP_HARDWARE_PIXELREAD
+	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+		coord_t		x, y;
+
+		switch(g->g.Orientation) {
+		default:
+		case GDISP_ROTATE_0:
+			x = g->p.x;
+			y = g->p.y;
+			break;
+		case GDISP_ROTATE_180:
+			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+			y = g->p.y;
+			break;
+		}
+		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+	}
+#endif
+
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+	LLDSPEC void gdisp_lld_control(GDisplay *g) {
+		switch(g->p.x) {
+		case GDISP_CONTROL_POWER:
+			if (g->g.Powermode == (powermode_t)g->p.ptr)
+				return;
+			switch((powermode_t)g->p.ptr) {
+			case powerOff:
+			case powerSleep:
+			case powerDeepSleep:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+				break;
+			case powerOn:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+				break;
+			default:
+				return;
+			}
+			g->g.Powermode = (powermode_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_ORIENTATION:
+			if (g->g.Orientation == (orientation_t)g->p.ptr)
+				return;
+			switch((orientation_t)g->p.ptr) {
+			/* Rotation is handled by the drawing routines */
+			case GDISP_ROTATE_0:
+			case GDISP_ROTATE_180:
+				g->g.Height = GDISP_SCREEN_HEIGHT;
+				g->g.Width = GDISP_SCREEN_WIDTH;
+				break;
+			case GDISP_ROTATE_90:
+			case GDISP_ROTATE_270:
+				g->g.Height = GDISP_SCREEN_WIDTH;
+				g->g.Width = GDISP_SCREEN_HEIGHT;
+				break;
+			default:
+				return;
+			}
+			g->g.Orientation = (orientation_t)g->p.ptr;
+			return;
+
+		case GDISP_CONTROL_BACKLIGHT:
+		    if (g->g.Backlight == (unsigned)g->p.ptr)
+                return;
+		    unsigned val = (unsigned)g->p.ptr;
+		    g->g.Backlight = val > 100 ? 100 : val;
+            g->flags |= GDISP_FLG_NEEDFLUSH;
+		    return;
+		}
+	}
+#endif // GDISP_NEED_CONTROL
+
+#endif // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
new file mode 100644
index 000000000..bb28ad775
--- /dev/null
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
@@ -0,0 +1,36 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support.                                                  */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL		TRUE
+#define GDISP_HARDWARE_PIXELREAD		TRUE
+#define GDISP_HARDWARE_CONTROL			TRUE
+
+#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
+
+#endif	/* GFX_USE_GDISP */
+
+#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565/driver.mk b/drivers/ugfx/gdisp/st7565/driver.mk
new file mode 100644
index 000000000..0190b6019
--- /dev/null
+++ b/drivers/ugfx/gdisp/st7565/driver.mk
@@ -0,0 +1,2 @@
+GFXINC += drivers/ugfx/gdisp/st7565
+GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
new file mode 100644
index 000000000..69c574772
--- /dev/null
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
@@ -0,0 +1,329 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_QMK
+#include "gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_ST7565.h"
+
+/*===========================================================================*/
+/* Driver local definitions.                                                 */
+/*===========================================================================*/
+
+#ifndef GDISP_SCREEN_HEIGHT
+#define GDISP_SCREEN_HEIGHT		32
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+#define GDISP_SCREEN_WIDTH		128
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+#define GDISP_INITIAL_CONTRAST	35
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+#define GDISP_INITIAL_BACKLIGHT	100
+#endif
+
+#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+
+#include "st7565.h"
+
+/*===========================================================================*/
+/* Driver config defaults for backward compatibility.               	     */
+/*===========================================================================*/
+#ifndef ST7565_LCD_BIAS
+#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
+#endif
+#ifndef ST7565_ADC
+#define ST7565_ADC              ST7565_ADC_NORMAL
+#endif
+#ifndef ST7565_COM_SCAN
+#define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
+#endif
+#ifndef ST7565_PAGE_ORDER
+#define ST7565_PAGE_ORDER       0,1,2,3
+#endif
+
+/*===========================================================================*/
+/* Driver local functions.                                                   */
+/*===========================================================================*/
+
+typedef struct{
+    bool_t buffer2;
+    uint8_t data_pos;
+    uint8_t data[16];
+    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
+}PrivData;
+
+// Some common routines and macros
+#define PRIV(g)                         ((PrivData*)g->priv)
+#define RAM(g)							(PRIV(g)->ram)
+
+static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
+    PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
+}
+
+static GFXINLINE void flush_cmd(GDisplay* g) {
+    write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
+    PRIV(g)->data_pos = 0;
+}
+
+#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
+#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+
+// Some common routines and macros
+#define delay(us)			gfxSleepMicroseconds(us)
+#define delay_ms(ms)		gfxSleepMilliseconds(ms)
+
+#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
+#define xybit(y)			(1<<((y)&7))
+
+/*===========================================================================*/
+/* Driver exported functions.                                                */
+/*===========================================================================*/
+
+/*
+ * As this controller can't update on a pixel boundary we need to maintain the
+ * the entire display surface in memory so that we can do the necessary bit
+ * operations. Fortunately it is a small display in monochrome.
+ * 64 * 128 / 8 = 1024 bytes.
+ */
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+    // The private area is the display surface.
+    g->priv = gfxAlloc(sizeof(PrivData));
+    PRIV(g)->buffer2 = false;
+    PRIV(g)->data_pos = 0;
+
+    // Initialise the board interface
+    init_board(g);
+
+    // Hardware reset
+    setpin_reset(g, TRUE);
+    gfxSleepMilliseconds(20);
+    setpin_reset(g, FALSE);
+    gfxSleepMilliseconds(20);
+    acquire_bus(g);
+    enter_cmd_mode(g);
+
+    write_cmd(g, ST7565_RESET);
+    write_cmd(g, ST7565_LCD_BIAS);
+    write_cmd(g, ST7565_ADC);
+    write_cmd(g, ST7565_COM_SCAN);
+
+    write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
+    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
+
+    // turn on internal power supply (VC=1, VR=1, VF=1)
+    write_cmd(g, ST7565_POWER_CONTROL | 0x07);
+
+    write_cmd(g, ST7565_INVERT_DISPLAY);
+    write_cmd(g, ST7565_ALLON_NORMAL);
+
+    write_cmd(g, ST7565_START_LINE | 0);
+    write_cmd(g, ST7565_RMW);
+    flush_cmd(g);
+
+    // Finish Init
+    post_init_board(g);
+
+    // Release the bus
+    release_bus(g);
+
+    /* Initialise the GDISP structure */
+    g->g.Width = GDISP_SCREEN_WIDTH;
+    g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Orientation = GDISP_ROTATE_0;
+    g->g.Powermode = powerOff;
+    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+    g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+    unsigned	p;
+
+    // Don't flush if we don't need it.
+    if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+        return;
+
+    acquire_bus(g);
+    enter_cmd_mode(g);
+    unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
+    for (p = 0; p < 4; p++) {
+        write_cmd(g, ST7565_PAGE | (p + dstOffset));
+        write_cmd(g, ST7565_COLUMN_MSB | 0);
+        write_cmd(g, ST7565_COLUMN_LSB | 0);
+        write_cmd(g, ST7565_RMW);
+        flush_cmd(g);
+        enter_data_mode(g);
+        write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+        enter_cmd_mode(g);
+    }
+    unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
+    write_cmd(g, ST7565_START_LINE | line);
+    flush_cmd(g);
+    PRIV(g)->buffer2 = !PRIV(g)->buffer2;
+    release_bus(g);
+
+    g->flags &= ~GDISP_FLG_NEEDFLUSH;
+}
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+    coord_t		x, y;
+
+    switch(g->g.Orientation) {
+    default:
+    case GDISP_ROTATE_0:
+        x = g->p.x;
+        y = g->p.y;
+        break;
+    case GDISP_ROTATE_90:
+        x = g->p.y;
+        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+        break;
+    case GDISP_ROTATE_180:
+        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+        break;
+    case GDISP_ROTATE_270:
+        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+        y = g->p.x;
+        break;
+    }
+    if (gdispColor2Native(g->p.color) != Black)
+        RAM(g)[xyaddr(x, y)] |= xybit(y);
+    else
+        RAM(g)[xyaddr(x, y)] &= ~xybit(y);
+    g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+#endif
+
+#if GDISP_HARDWARE_PIXELREAD
+LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+    coord_t		x, y;
+
+    switch(g->g.Orientation) {
+    default:
+    case GDISP_ROTATE_0:
+        x = g->p.x;
+        y = g->p.y;
+        break;
+    case GDISP_ROTATE_90:
+        x = g->p.y;
+        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+        break;
+    case GDISP_ROTATE_180:
+        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+        break;
+    case GDISP_ROTATE_270:
+        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+        y = g->p.x;
+        break;
+    }
+    return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
+}
+#endif
+
+LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
+    uint8_t* buffer = (uint8_t*)g->p.ptr;
+    int linelength = g->p.cx;
+    for (int i = 0; i < g->p.cy; i++) {
+        unsigned dstx = g->p.x;
+        unsigned dsty = g->p.y + i;
+        unsigned srcx = g->p.x1;
+        unsigned srcy = g->p.y1 + i;
+        unsigned srcbit = srcy * g->p.x2 + srcx;
+        for(int j=0; j < linelength; j++) {
+            uint8_t src = buffer[srcbit / 8];
+            uint8_t bit = 7-(srcbit % 8);
+            uint8_t bitset = (src >> bit) & 1;
+            uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
+            if (bitset) {
+                *dst |= xybit(dsty);
+            }
+            else {
+                *dst &= ~xybit(dsty);
+            }
+			dstx++;
+            srcbit++;
+        }
+    }
+    g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+LLDSPEC void gdisp_lld_control(GDisplay *g) {
+    switch(g->p.x) {
+    case GDISP_CONTROL_POWER:
+        if (g->g.Powermode == (powermode_t)g->p.ptr)
+            return;
+        switch((powermode_t)g->p.ptr) {
+        case powerOff:
+        case powerSleep:
+        case powerDeepSleep:
+            acquire_bus(g);
+            enter_cmd_mode(g);
+            write_cmd(g, ST7565_DISPLAY_OFF);
+            flush_cmd(g);
+            release_bus(g);
+            break;
+        case powerOn:
+            acquire_bus(g);
+            enter_cmd_mode(g);
+            write_cmd(g, ST7565_DISPLAY_ON);
+            flush_cmd(g);
+            release_bus(g);
+            break;
+        default:
+            return;
+        }
+        g->g.Powermode = (powermode_t)g->p.ptr;
+        return;
+
+        case GDISP_CONTROL_ORIENTATION:
+            if (g->g.Orientation == (orientation_t)g->p.ptr)
+                return;
+            switch((orientation_t)g->p.ptr) {
+            /* Rotation is handled by the drawing routines */
+            case GDISP_ROTATE_0:
+            case GDISP_ROTATE_180:
+                g->g.Height = GDISP_SCREEN_HEIGHT;
+                g->g.Width = GDISP_SCREEN_WIDTH;
+                break;
+            case GDISP_ROTATE_90:
+            case GDISP_ROTATE_270:
+                g->g.Height = GDISP_SCREEN_WIDTH;
+                g->g.Width = GDISP_SCREEN_HEIGHT;
+                break;
+            default:
+                return;
+            }
+            g->g.Orientation = (orientation_t)g->p.ptr;
+            return;
+
+            case GDISP_CONTROL_CONTRAST:
+                g->g.Contrast = (unsigned)g->p.ptr & 63;
+                acquire_bus(g);
+                enter_cmd_mode(g);
+                write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
+                flush_cmd(g);
+                release_bus(g);
+                return;
+    }
+}
+#endif // GDISP_NEED_CONTROL
+
+#endif // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
new file mode 100644
index 000000000..2b66a877c
--- /dev/null
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support.                                                  */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH            TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL        TRUE
+#define GDISP_HARDWARE_PIXELREAD        TRUE
+#define GDISP_HARDWARE_CONTROL          TRUE
+#define GDISP_HARDWARE_BITFILLS         TRUE
+
+#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
+
+#endif	/* GFX_USE_GDISP */
+
+#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565/st7565.h b/drivers/ugfx/gdisp/st7565/st7565.h
new file mode 100644
index 000000000..24924ff05
--- /dev/null
+++ b/drivers/ugfx/gdisp/st7565/st7565.h
@@ -0,0 +1,39 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _ST7565_H
+#define _ST7565_H
+
+#define ST7565_CONTRAST             0x81
+#define ST7565_ALLON_NORMAL         0xA4
+#define ST7565_ALLON                0xA5
+#define ST7565_POSITIVE_DISPLAY     0xA6
+#define ST7565_INVERT_DISPLAY       0xA7
+#define ST7565_DISPLAY_OFF          0xAE
+#define ST7565_DISPLAY_ON           0xAF
+
+#define ST7565_LCD_BIAS_7           0xA3
+#define ST7565_LCD_BIAS_9           0xA2
+
+#define ST7565_ADC_NORMAL           0xA0
+#define ST7565_ADC_REVERSE          0xA1
+
+#define ST7565_COM_SCAN_INC         0xC0
+#define ST7565_COM_SCAN_DEC         0xC8
+
+#define ST7565_START_LINE           0x40
+#define ST7565_PAGE                 0xB0
+#define ST7565_COLUMN_MSB           0x10
+#define ST7565_COLUMN_LSB           0x00
+#define ST7565_RMW                  0xE0
+
+#define ST7565_RESISTOR_RATIO       0x20
+#define ST7565_POWER_CONTROL        0x28
+
+#define ST7565_RESET                0xE2
+
+#endif /* _ST7565_H */
diff --git a/drivers/ugfx/gdisp/st7565ergodox/driver.mk b/drivers/ugfx/gdisp/st7565ergodox/driver.mk
deleted file mode 100644
index 401e15e69..000000000
--- a/drivers/ugfx/gdisp/st7565ergodox/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/ugfx/gdisp/st7565ergodox
-GFXSRC += drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c
diff --git a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c
deleted file mode 100644
index c576280a1..000000000
--- a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_ERGODOX
-#include "gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_ST7565.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT		32
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH		128
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST	35
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT	100
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#include "st7565.h"
-
-/*===========================================================================*/
-/* Driver config defaults for backward compatibility.               	     */
-/*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
-#define ST7565_PAGE_ORDER       0,1,2,3
-#endif
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    bool_t buffer2;
-    uint8_t data_pos;
-    uint8_t data[16];
-    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-#define RAM(g)							(PRIV(g)->ram)
-
-static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
-    PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
-}
-
-static GFXINLINE void flush_cmd(GDisplay* g) {
-    write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
-    PRIV(g)->data_pos = 0;
-}
-
-#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
-
-// Some common routines and macros
-#define delay(us)			gfxSleepMicroseconds(us)
-#define delay_ms(ms)		gfxSleepMilliseconds(ms)
-
-#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y)			(1<<((y)&7))
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-/*
- * As this controller can't update on a pixel boundary we need to maintain the
- * the entire display surface in memory so that we can do the necessary bit
- * operations. Fortunately it is a small display in monochrome.
- * 64 * 128 / 8 = 1024 bytes.
- */
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-    // The private area is the display surface.
-    g->priv = gfxAlloc(sizeof(PrivData));
-    PRIV(g)->buffer2 = false;
-    PRIV(g)->data_pos = 0;
-
-    // Initialise the board interface
-    init_board(g);
-
-    // Hardware reset
-    setpin_reset(g, TRUE);
-    gfxSleepMilliseconds(20);
-    setpin_reset(g, FALSE);
-    gfxSleepMilliseconds(20);
-    acquire_bus(g);
-    enter_cmd_mode(g);
-
-    write_cmd(g, ST7565_RESET);
-    write_cmd(g, ST7565_LCD_BIAS);
-    write_cmd(g, ST7565_ADC);
-    write_cmd(g, ST7565_COM_SCAN);
-
-    write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
-    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
-
-    // turn on internal power supply (VC=1, VR=1, VF=1)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x07);
-
-    write_cmd(g, ST7565_INVERT_DISPLAY);
-    write_cmd(g, ST7565_ALLON_NORMAL);
-
-    write_cmd(g, ST7565_START_LINE | 0);
-    write_cmd(g, ST7565_RMW);
-    flush_cmd(g);
-
-    // Finish Init
-    post_init_board(g);
-
-    // Release the bus
-    release_bus(g);
-
-    /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
-    g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
-    return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned	p;
-
-    // Don't flush if we don't need it.
-    if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-        return;
-
-    acquire_bus(g);
-    enter_cmd_mode(g);
-    unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
-    for (p = 0; p < 4; p++) {
-        write_cmd(g, ST7565_PAGE | (p + dstOffset));
-        write_cmd(g, ST7565_COLUMN_MSB | 0);
-        write_cmd(g, ST7565_COLUMN_LSB | 0);
-        write_cmd(g, ST7565_RMW);
-        flush_cmd(g);
-        enter_data_mode(g);
-        write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
-        enter_cmd_mode(g);
-    }
-    unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
-    write_cmd(g, ST7565_START_LINE | line);
-    flush_cmd(g);
-    PRIV(g)->buffer2 = !PRIV(g)->buffer2;
-    release_bus(g);
-
-    g->flags &= ~GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t		x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
-    }
-    if (gdispColor2Native(g->p.color) != Black)
-        RAM(g)[xyaddr(x, y)] |= xybit(y);
-    else
-        RAM(g)[xyaddr(x, y)] &= ~xybit(y);
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t		x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
-    }
-    return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
-}
-#endif
-
-LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
-    uint8_t* buffer = (uint8_t*)g->p.ptr;
-    int linelength = g->p.cx;
-    for (int i = 0; i < g->p.cy; i++) {
-        unsigned dstx = g->p.x;
-        unsigned dsty = g->p.y + i;
-        unsigned srcx = g->p.x1;
-        unsigned srcy = g->p.y1 + i;
-        unsigned srcbit = srcy * g->p.x2 + srcx;
-        for(int j=0; j < linelength; j++) {
-            uint8_t src = buffer[srcbit / 8];
-            uint8_t bit = 7-(srcbit % 8);
-            uint8_t bitset = (src >> bit) & 1;
-            uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
-            if (bitset) {
-                *dst |= xybit(dsty);
-            }
-            else {
-                *dst &= ~xybit(dsty);
-            }
-			dstx++;
-            srcbit++;
-        }
-    }
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-LLDSPEC void gdisp_lld_control(GDisplay *g) {
-    switch(g->p.x) {
-    case GDISP_CONTROL_POWER:
-        if (g->g.Powermode == (powermode_t)g->p.ptr)
-            return;
-        switch((powermode_t)g->p.ptr) {
-        case powerOff:
-        case powerSleep:
-        case powerDeepSleep:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_OFF);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        case powerOn:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_ON);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        default:
-            return;
-        }
-        g->g.Powermode = (powermode_t)g->p.ptr;
-        return;
-
-        case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
-            }
-            g->g.Orientation = (orientation_t)g->p.ptr;
-            return;
-
-            case GDISP_CONTROL_CONTRAST:
-                g->g.Contrast = (unsigned)g->p.ptr & 63;
-                acquire_bus(g);
-                enter_cmd_mode(g);
-                write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
-                flush_cmd(g);
-                release_bus(g);
-                return;
-    }
-}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h
deleted file mode 100644
index 2b66a877c..000000000
--- a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH            TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
-#define GDISP_HARDWARE_BITFILLS         TRUE
-
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565ergodox/st7565.h b/drivers/ugfx/gdisp/st7565ergodox/st7565.h
deleted file mode 100644
index 24924ff05..000000000
--- a/drivers/ugfx/gdisp/st7565ergodox/st7565.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _ST7565_H
-#define _ST7565_H
-
-#define ST7565_CONTRAST             0x81
-#define ST7565_ALLON_NORMAL         0xA4
-#define ST7565_ALLON                0xA5
-#define ST7565_POSITIVE_DISPLAY     0xA6
-#define ST7565_INVERT_DISPLAY       0xA7
-#define ST7565_DISPLAY_OFF          0xAE
-#define ST7565_DISPLAY_ON           0xAF
-
-#define ST7565_LCD_BIAS_7           0xA3
-#define ST7565_LCD_BIAS_9           0xA2
-
-#define ST7565_ADC_NORMAL           0xA0
-#define ST7565_ADC_REVERSE          0xA1
-
-#define ST7565_COM_SCAN_INC         0xC0
-#define ST7565_COM_SCAN_DEC         0xC8
-
-#define ST7565_START_LINE           0x40
-#define ST7565_PAGE                 0xB0
-#define ST7565_COLUMN_MSB           0x10
-#define ST7565_COLUMN_LSB           0x00
-#define ST7565_RMW                  0xE0
-
-#define ST7565_RESISTOR_RATIO       0x20
-#define ST7565_POWER_CONTROL        0x28
-
-#define ST7565_RESET                0xE2
-
-#endif /* _ST7565_H */
diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h
index 45b9f5858..a3fb5b0c7 100644
--- a/keyboards/ergodox/infinity/gfxconf.h
+++ b/keyboards/ergodox/infinity/gfxconf.h
@@ -130,7 +130,7 @@
 //#define GDISP_TOTAL_DISPLAYS		                 2
 
 #ifndef EMULATOR
-#define GDISP_DRIVER_LIST                            GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX
+#define GDISP_DRIVER_LIST                            GDISPVMT_ST7565_QMK, GDISPVMT_IS31FL3731C_QMK
 #else
 #define GDISP_DRIVER_LIST                            GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX
 #endif
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
index 9e2246363..18171560d 100644
--- a/keyboards/ergodox/infinity/rules.mk
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -67,5 +67,5 @@ LCD_BACKLIGHT_ENABLE = yes
 MIDI_ENABLE = no
 RGBLIGHT_ENABLE = no
 
-include $(TOP_DIR)/drivers/ugfx/gdisp/st7565ergodox/driver.mk
-include $(TOP_DIR)/drivers/ugfx/gdisp/IS31FL3731C/driver.mk
\ No newline at end of file
+include $(TOP_DIR)/drivers/ugfx/gdisp/st7565/driver.mk
+include $(TOP_DIR)/drivers/ugfx/gdisp/is31fl3731c/driver.mk
\ No newline at end of file
diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h
index 890317a0f..27dfb94fb 100644
--- a/keyboards/whitefox/gfxconf.h
+++ b/keyboards/whitefox/gfxconf.h
@@ -130,7 +130,7 @@
 //#define GDISP_TOTAL_DISPLAYS		                 2
 
 #ifndef EMULATOR
-#define GDISP_DRIVER_LIST                            GDISPVMT_IS31FL3731C_WHITEFOX
+#define GDISP_DRIVER_LIST                            GDISPVMT_IS31FL3731C_QMK
 #endif
 
     #ifdef GDISP_DRIVER_LIST
diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk
index 4cf23a390..c0effcb7b 100644
--- a/keyboards/whitefox/rules.mk
+++ b/keyboards/whitefox/rules.mk
@@ -70,4 +70,4 @@ CUSTOM_MATRIX = yes # Custom matrix file
 BACKLIGHT_ENABLE = yes
 VISUALIZER_ENABLE = yes
 
-include $(TOP_DIR)/drivers/ugfx/gdisp/IS31FL3731C/driver.mk
+include $(TOP_DIR)/drivers/ugfx/gdisp/is31fl3731c/driver.mk
-- 
cgit v1.2.3-70-g09d2


From 011ee294414800eaa18ce7c3f9447054d9eae765 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 9 Jul 2017 13:50:18 +0300
Subject: Fixup mixed tabs/spaces

---
 drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c | 246 ++++++++++-----------
 drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h  |  14 +-
 drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c       |  36 +--
 drivers/ugfx/gdisp/st7565/gdisp_lld_config.h       |   6 +-
 keyboards/ergodox/infinity/board_ST7565.h          |   6 +-
 5 files changed, 154 insertions(+), 154 deletions(-)

(limited to 'keyboards')

diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
index c55dd0a0e..0691dbfbf 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
@@ -19,7 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_QMK
+#define GDISP_DRIVER_VMT            GDISPVMT_IS31FL3731C_QMK
 #include "gdisp_lld_config.h"
 #include "src/gdisp/gdisp_driver.h"
 
@@ -34,26 +34,26 @@ extern const uint8_t CIE1931_CURVE[];
 /*===========================================================================*/
 
 #ifndef GDISP_SCREEN_HEIGHT
-	#define GDISP_SCREEN_HEIGHT		9
+    #define GDISP_SCREEN_HEIGHT       9
 #endif
 #ifndef GDISP_SCREEN_WIDTH
-	#define GDISP_SCREEN_WIDTH		16
+    #define GDISP_SCREEN_WIDTH        16
 #endif
 #ifndef GDISP_INITIAL_CONTRAST
-	#define GDISP_INITIAL_CONTRAST	0
+    #define GDISP_INITIAL_CONTRAST    0
 #endif
 #ifndef GDISP_INITIAL_BACKLIGHT
-	#define GDISP_INITIAL_BACKLIGHT	0
+    #define GDISP_INITIAL_BACKLIGHT   0
 #endif
 
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+#define GDISP_FLG_NEEDFLUSH           (GDISP_FLG_DRIVER<<0)
 
 #define IS31_ADDR_DEFAULT 0x74
 
-#define IS31_REG_CONFIG  0x00
+#define IS31_REG_CONFIG   0x00
 // bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31_REG_CONFIG_PICTUREMODE   0x00
+#define IS31_REG_CONFIG_AUTOPLAYMODE  0x08
 #define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
 // D2:D0 bits are starting frame for autoplay mode
 
@@ -144,14 +144,14 @@ static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint
 }
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-	// The private area is the display surface.
-	g->priv = gfxAlloc(sizeof(PrivData));
+    // The private area is the display surface.
+    g->priv = gfxAlloc(sizeof(PrivData));
     __builtin_memset(PRIV(g), 0, sizeof(PrivData));
-	PRIV(g)->page = 0;
+    PRIV(g)->page = 0;
 
-	// Initialise the board interface
-	init_board(g);
-	gfxSleepMilliseconds(10);
+    // Initialise the board interface
+    init_board(g);
+    gfxSleepMilliseconds(10);
 
     // zero function page, all registers (assuming full_page is all zeroes)
     write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
@@ -179,134 +179,134 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     // Finish Init
     post_init_board(g);
 
-	/* Initialise the GDISP structure */
-	g->g.Width = GDISP_SCREEN_WIDTH;
-	g->g.Height = GDISP_SCREEN_HEIGHT;
-	g->g.Orientation = GDISP_ROTATE_0;
-	g->g.Powermode = powerOff;
-	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-	g->g.Contrast = GDISP_INITIAL_CONTRAST;
-	return TRUE;
+    /* Initialise the GDISP structure */
+    g->g.Width = GDISP_SCREEN_WIDTH;
+    g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Orientation = GDISP_ROTATE_0;
+    g->g.Powermode = powerOff;
+    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+    g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    return TRUE;
 }
 
 #if GDISP_HARDWARE_FLUSH
-	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-		// Don't flush if we don't need it.
-		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-			return;
-
-		PRIV(g)->page++;
-		PRIV(g)->page %= 2;
-		// TODO: some smarter algorithm for this
-		// We should run only one physical page at a time
-		// This way we don't need to send so much data, and
-		// we could use slightly less memory
-		uint8_t* src = PRIV(g)->frame_buffer;
-		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-		        ++src;
-		    }
-		}
+    LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+        // Don't flush if we don't need it.
+        if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+            return;
+
+        PRIV(g)->page++;
+        PRIV(g)->page %= 2;
+        // TODO: some smarter algorithm for this
+        // We should run only one physical page at a time
+        // This way we don't need to send so much data, and
+        // we could use slightly less memory
+        uint8_t* src = PRIV(g)->frame_buffer;
+        for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
+            for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
+                uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
+                PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
+                ++src;
+            }
+        }
         write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
         gfxSleepMilliseconds(1);
         write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
 
-		g->flags &= ~GDISP_FLG_NEEDFLUSH;
-	}
+        g->flags &= ~GDISP_FLG_NEEDFLUSH;
+    }
 #endif
 
 #if GDISP_HARDWARE_DRAWPIXEL
-	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-		g->flags |= GDISP_FLG_NEEDFLUSH;
-	}
+    LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+        coord_t        x, y;
+
+        switch(g->g.Orientation) {
+        default:
+        case GDISP_ROTATE_0:
+            x = g->p.x;
+            y = g->p.y;
+            break;
+        case GDISP_ROTATE_180:
+            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            y = g->p.y;
+            break;
+        }
+        PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+        g->flags |= GDISP_FLG_NEEDFLUSH;
+    }
 #endif
 
 #if GDISP_HARDWARE_PIXELREAD
-	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
-	}
+    LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+        coord_t        x, y;
+
+        switch(g->g.Orientation) {
+        default:
+        case GDISP_ROTATE_0:
+            x = g->p.x;
+            y = g->p.y;
+            break;
+        case GDISP_ROTATE_180:
+            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            y = g->p.y;
+            break;
+        }
+        return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+    }
 #endif
 
 #if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-	LLDSPEC void gdisp_lld_control(GDisplay *g) {
-		switch(g->p.x) {
-		case GDISP_CONTROL_POWER:
-			if (g->g.Powermode == (powermode_t)g->p.ptr)
-				return;
-			switch((powermode_t)g->p.ptr) {
-			case powerOff:
-			case powerSleep:
-			case powerDeepSleep:
+    LLDSPEC void gdisp_lld_control(GDisplay *g) {
+        switch(g->p.x) {
+        case GDISP_CONTROL_POWER:
+            if (g->g.Powermode == (powermode_t)g->p.ptr)
+                return;
+            switch((powermode_t)g->p.ptr) {
+            case powerOff:
+            case powerSleep:
+            case powerDeepSleep:
                 write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-				break;
-			case powerOn:
+                break;
+            case powerOn:
                 write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-				break;
-			default:
-				return;
-			}
-			g->g.Powermode = (powermode_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_ORIENTATION:
-			if (g->g.Orientation == (orientation_t)g->p.ptr)
-				return;
-			switch((orientation_t)g->p.ptr) {
-			/* Rotation is handled by the drawing routines */
-			case GDISP_ROTATE_0:
-			case GDISP_ROTATE_180:
-				g->g.Height = GDISP_SCREEN_HEIGHT;
-				g->g.Width = GDISP_SCREEN_WIDTH;
-				break;
-			case GDISP_ROTATE_90:
-			case GDISP_ROTATE_270:
-				g->g.Height = GDISP_SCREEN_WIDTH;
-				g->g.Width = GDISP_SCREEN_HEIGHT;
-				break;
-			default:
-				return;
-			}
-			g->g.Orientation = (orientation_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_BACKLIGHT:
-		    if (g->g.Backlight == (unsigned)g->p.ptr)
+                break;
+            default:
                 return;
-		    unsigned val = (unsigned)g->p.ptr;
-		    g->g.Backlight = val > 100 ? 100 : val;
+            }
+            g->g.Powermode = (powermode_t)g->p.ptr;
+            return;
+
+        case GDISP_CONTROL_ORIENTATION:
+            if (g->g.Orientation == (orientation_t)g->p.ptr)
+                return;
+            switch((orientation_t)g->p.ptr) {
+            /* Rotation is handled by the drawing routines */
+            case GDISP_ROTATE_0:
+            case GDISP_ROTATE_180:
+                g->g.Height = GDISP_SCREEN_HEIGHT;
+                g->g.Width = GDISP_SCREEN_WIDTH;
+                break;
+            case GDISP_ROTATE_90:
+            case GDISP_ROTATE_270:
+                g->g.Height = GDISP_SCREEN_WIDTH;
+                g->g.Width = GDISP_SCREEN_HEIGHT;
+                break;
+            default:
+                return;
+            }
+            g->g.Orientation = (orientation_t)g->p.ptr;
+            return;
+
+        case GDISP_CONTROL_BACKLIGHT:
+            if (g->g.Backlight == (unsigned)g->p.ptr)
+                return;
+            unsigned val = (unsigned)g->p.ptr;
+            g->g.Backlight = val > 100 ? 100 : val;
             g->flags |= GDISP_FLG_NEEDFLUSH;
-		    return;
-		}
-	}
+            return;
+        }
+    }
 #endif // GDISP_NEED_CONTROL
 
 #endif // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
index bb28ad775..588d688cf 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
@@ -24,13 +24,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL		TRUE
-#define GDISP_HARDWARE_PIXELREAD		TRUE
-#define GDISP_HARDWARE_CONTROL			TRUE
+#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL        TRUE
+#define GDISP_HARDWARE_PIXELREAD        TRUE
+#define GDISP_HARDWARE_CONTROL          TRUE
 
-#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
+#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_GRAY256
 
-#endif	/* GFX_USE_GDISP */
+#endif    /* GFX_USE_GDISP */
 
-#endif	/* _GDISP_LLD_CONFIG_H */
+#endif    /* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
index 69c574772..55552cb79 100644
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
@@ -9,7 +9,7 @@
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_QMK
+#define GDISP_DRIVER_VMT            GDISPVMT_ST7565_QMK
 #include "gdisp_lld_config.h"
 #include "src/gdisp/gdisp_driver.h"
 
@@ -20,24 +20,24 @@
 /*===========================================================================*/
 
 #ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT		32
+#define GDISP_SCREEN_HEIGHT         32
 #endif
 #ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH		128
+#define GDISP_SCREEN_WIDTH          128
 #endif
 #ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST	35
+#define GDISP_INITIAL_CONTRAST      35
 #endif
 #ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT	100
+#define GDISP_INITIAL_BACKLIGHT     100
 #endif
 
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+#define GDISP_FLG_NEEDFLUSH         (GDISP_FLG_DRIVER<<0)
 
 #include "st7565.h"
 
 /*===========================================================================*/
-/* Driver config defaults for backward compatibility.               	     */
+/* Driver config defaults for backward compatibility.                        */
 /*===========================================================================*/
 #ifndef ST7565_LCD_BIAS
 #define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
@@ -65,7 +65,7 @@ typedef struct{
 
 // Some common routines and macros
 #define PRIV(g)                         ((PrivData*)g->priv)
-#define RAM(g)							(PRIV(g)->ram)
+#define RAM(g)                          (PRIV(g)->ram)
 
 static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
     PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
@@ -76,15 +76,15 @@ static GFXINLINE void flush_cmd(GDisplay* g) {
     PRIV(g)->data_pos = 0;
 }
 
-#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+#define write_cmd2(g, cmd1, cmd2)        { write_cmd(g, cmd1); write_cmd(g, cmd2); }
+#define write_cmd3(g, cmd1, cmd2, cmd3)  { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
 
 // Some common routines and macros
-#define delay(us)			gfxSleepMicroseconds(us)
-#define delay_ms(ms)		gfxSleepMilliseconds(ms)
+#define delay(us)           gfxSleepMicroseconds(us)
+#define delay_ms(ms)        gfxSleepMilliseconds(ms)
 
-#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y)			(1<<((y)&7))
+#define xyaddr(x, y)        ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
+#define xybit(y)            (1<<((y)&7))
 
 /*===========================================================================*/
 /* Driver exported functions.                                                */
@@ -150,7 +150,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
 
 #if GDISP_HARDWARE_FLUSH
 LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned	p;
+    unsigned    p;
 
     // Don't flush if we don't need it.
     if (!(g->flags & GDISP_FLG_NEEDFLUSH))
@@ -181,7 +181,7 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
 
 #if GDISP_HARDWARE_DRAWPIXEL
 LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t		x, y;
+    coord_t        x, y;
 
     switch(g->g.Orientation) {
     default:
@@ -212,7 +212,7 @@ LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
 
 #if GDISP_HARDWARE_PIXELREAD
 LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t		x, y;
+    coord_t        x, y;
 
     switch(g->g.Orientation) {
     default:
@@ -257,7 +257,7 @@ LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
             else {
                 *dst &= ~xybit(dsty);
             }
-			dstx++;
+            dstx++;
             srcbit++;
         }
     }
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
index 2b66a877c..4446bd38b 100644
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
@@ -14,7 +14,7 @@
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH            TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
 #define GDISP_HARDWARE_DRAWPIXEL        TRUE
 #define GDISP_HARDWARE_PIXELREAD        TRUE
 #define GDISP_HARDWARE_CONTROL          TRUE
@@ -22,6 +22,6 @@
 
 #define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
 
-#endif	/* GFX_USE_GDISP */
+#endif    /* GFX_USE_GDISP */
 
-#endif	/* _GDISP_LLD_CONFIG_H */
+#endif    /* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/ergodox/infinity/board_ST7565.h b/keyboards/ergodox/infinity/board_ST7565.h
index 9650ffb44..9ab636c95 100644
--- a/keyboards/ergodox/infinity/board_ST7565.h
+++ b/keyboards/ergodox/infinity/board_ST7565.h
@@ -83,7 +83,7 @@ static GFXINLINE void init_board(GDisplay *g) {
 }
 
 static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
+    (void) g;
 }
 
 static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
@@ -106,8 +106,8 @@ static GFXINLINE void enter_cmd_mode(GDisplay *g) {
 
 
 static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	spiSend(&SPID1, length, data);
+    (void) g;
+    spiSend(&SPID1, length, data);
 }
 
 #endif /* _GDISP_LLD_BOARD_H */
-- 
cgit v1.2.3-70-g09d2


From 8a962f7b271e965fa69eeb9aeab23a5969669984 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 9 Jul 2017 14:03:36 +0300
Subject: Define visualizer thread priority by default

---
 keyboards/ergodox/infinity/config.h | 2 --
 keyboards/whitefox/config.h         | 4 +---
 quantum/visualizer/visualizer.c     | 3 ++-
 3 files changed, 3 insertions(+), 6 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h
index 25cc8af0f..fa157a893 100644
--- a/keyboards/ergodox/infinity/config.h
+++ b/keyboards/ergodox/infinity/config.h
@@ -51,8 +51,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define SERIAL_LINK_BAUD 562500
 #define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
-// The visualizer needs gfx thread priorities
-#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
 
 #define VISUALIZER_USER_DATA_SIZE 16
 
diff --git a/keyboards/whitefox/config.h b/keyboards/whitefox/config.h
index 08de9b9aa..76040bd74 100644
--- a/keyboards/whitefox/config.h
+++ b/keyboards/whitefox/config.h
@@ -87,6 +87,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LED_DISPLAY_NUMBER 0
 
 #define LED_NUM_ROWS 5
-#define LED_NUM_COLS 16
-
-#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
+#define LED_NUM_COLS 16
\ No newline at end of file
diff --git a/quantum/visualizer/visualizer.c b/quantum/visualizer/visualizer.c
index cc99d1e3b..68b86f590 100644
--- a/quantum/visualizer/visualizer.c
+++ b/quantum/visualizer/visualizer.c
@@ -52,7 +52,8 @@ SOFTWARE.
 
 // Define this in config.h
 #ifndef VISUALIZER_THREAD_PRIORITY
-#define "Visualizer thread priority not defined"
+// The visualizer needs gfx thread priorities
+#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
 #endif
 
 static visualizer_keyboard_status_t current_status = {
-- 
cgit v1.2.3-70-g09d2


From f3c113fb5a5ea89762b5c51d5d182093f6fb999d Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 9 Jul 2017 14:31:38 +0300
Subject: Shared gfxconf

---
 keyboards/ergodox/infinity/gfxconf.h | 300 +-------------------------------
 keyboards/whitefox/gfxconf.h         | 300 +-------------------------------
 quantum/visualizer/common_gfxconf.h  | 325 +++++++++++++++++++++++++++++++++++
 quantum/visualizer/visualizer.mk     |   3 +
 4 files changed, 330 insertions(+), 598 deletions(-)
 create mode 100644 quantum/visualizer/common_gfxconf.h

(limited to 'keyboards')

diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h
index a3fb5b0c7..0d017aea9 100644
--- a/keyboards/ergodox/infinity/gfxconf.h
+++ b/keyboards/ergodox/infinity/gfxconf.h
@@ -22,310 +22,12 @@
 #ifndef _GFXCONF_H
 #define _GFXCONF_H
 
-
-///////////////////////////////////////////////////////////////////////////
-// GOS - One of these must be defined, preferably in your Makefile       //
-///////////////////////////////////////////////////////////////////////////
-//#define GFX_USE_OS_CHIBIOS                           TRUE
-//#define GFX_USE_OS_FREERTOS                          FALSE
-//    #define GFX_FREERTOS_USE_TRACE                   FALSE
-//#define GFX_USE_OS_WIN32                             FALSE
-//#define GFX_USE_OS_LINUX                             FALSE
-//#define GFX_USE_OS_OSX                               FALSE
-//#define GFX_USE_OS_ECOS                              FALSE
-//#define GFX_USE_OS_RAWRTOS                           FALSE
-//#define GFX_USE_OS_ARDUINO                           FALSE
-//#define GFX_USE_OS_KEIL                              FALSE
-//#define GFX_USE_OS_CMSIS                             FALSE
-//#define GFX_USE_OS_RAW32                             FALSE
-//    #define INTERRUPTS_OFF()                         optional_code
-//    #define INTERRUPTS_ON()                          optional_code
-// These are not defined by default for some reason
-#define GOS_NEED_X_THREADS	FALSE
-#define GOS_NEED_X_HEAP		FALSE
-
-// Options that (should where relevant) apply to all operating systems
-    #define GFX_NO_INLINE                            FALSE
-//    #define GFX_COMPILER                             GFX_COMPILER_UNKNOWN
-//    #define GFX_CPU                                  GFX_CPU_UNKNOWN
-//    #define GFX_OS_HEAP_SIZE                         0
-//    #define GFX_OS_NO_INIT                           FALSE
-//    #define GFX_OS_INIT_NO_WARNING                   FALSE
-//    #define GFX_OS_PRE_INIT_FUNCTION                 myHardwareInitRoutine
-//    #define GFX_OS_EXTRA_INIT_FUNCTION               myOSInitRoutine
-//    #define GFX_OS_EXTRA_DEINIT_FUNCTION             myOSDeInitRoutine
-
-
-///////////////////////////////////////////////////////////////////////////
-// GDISP                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GDISP                                TRUE
-
-//#define GDISP_NEED_AUTOFLUSH                         FALSE
-//#define GDISP_NEED_TIMERFLUSH                        FALSE
-//#define GDISP_NEED_VALIDATION                        TRUE
-//#define GDISP_NEED_CLIP                              TRUE
-#define GDISP_NEED_CIRCLE                            TRUE
-#define GDISP_NEED_ELLIPSE                           TRUE
-#define GDISP_NEED_ARC                               TRUE
-#define GDISP_NEED_ARCSECTORS                        TRUE
-#define GDISP_NEED_CONVEX_POLYGON                    TRUE
-//#define GDISP_NEED_SCROLL                            FALSE
-#define GDISP_NEED_PIXELREAD                         TRUE
-#define GDISP_NEED_CONTROL                           TRUE
-//#define GDISP_NEED_QUERY                             FALSE
-//#define GDISP_NEED_MULTITHREAD                       FALSE
-//#define GDISP_NEED_STREAMING                         FALSE
-#define GDISP_NEED_TEXT                              TRUE
-//    #define GDISP_NEED_TEXT_WORDWRAP                 FALSE
-//    #define GDISP_NEED_ANTIALIAS                     FALSE
-//    #define GDISP_NEED_UTF8                          FALSE
-    #define GDISP_NEED_TEXT_KERNING                  TRUE
-//    #define GDISP_INCLUDE_FONT_UI1                   FALSE
-//    #define GDISP_INCLUDE_FONT_UI2                   FALSE		// The smallest preferred font.
-//    #define GDISP_INCLUDE_FONT_LARGENUMBERS          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS10          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32          FALSE
-    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12      TRUE
-//    #define GDISP_INCLUDE_FONT_FIXED_10X20           FALSE
-//    #define GDISP_INCLUDE_FONT_FIXED_7X14            FALSE
-    #define GDISP_INCLUDE_FONT_FIXED_5X8             TRUE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA   FALSE
-//    #define GDISP_INCLUDE_USER_FONTS                 FALSE
-
-//#define GDISP_NEED_IMAGE                             FALSE
-//    #define GDISP_NEED_IMAGE_NATIVE                  FALSE
-//    #define GDISP_NEED_IMAGE_GIF                     FALSE
-//    #define GDISP_NEED_IMAGE_BMP                     FALSE
-//        #define GDISP_NEED_IMAGE_BMP_1               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_16              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_24              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_32              FALSE
-//    #define GDISP_NEED_IMAGE_JPG                     FALSE
-//    #define GDISP_NEED_IMAGE_PNG                     FALSE
-//    #define GDISP_NEED_IMAGE_ACCOUNTING              FALSE
-#ifdef EMULATOR
-#define GDISP_NEED_PIXMAP                            TRUE
-#endif
-//    #define GDISP_NEED_PIXMAP_IMAGE                  FALSE
-
-//#define GDISP_DEFAULT_ORIENTATION                    GDISP_ROTATE_LANDSCAPE    // If not defined the native hardware orientation is used.
-//#define GDISP_LINEBUF_SIZE                           128
-//#define GDISP_STARTUP_COLOR                          Black
-#define GDISP_NEED_STARTUP_LOGO                      FALSE
-
-//#define GDISP_TOTAL_DISPLAYS		                 2
-
 #ifndef EMULATOR
 #define GDISP_DRIVER_LIST                            GDISPVMT_ST7565_QMK, GDISPVMT_IS31FL3731C_QMK
 #else
 #define GDISP_DRIVER_LIST                            GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX
 #endif
 
-    #ifdef GDISP_DRIVER_LIST
-        // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
-        #define GDISP_HARDWARE_STREAM_WRITE          FALSE
-        #define GDISP_HARDWARE_STREAM_READ           FALSE
-        #define GDISP_HARDWARE_STREAM_POS            FALSE
-        #define GDISP_HARDWARE_DRAWPIXEL             TRUE
-        #define GDISP_HARDWARE_CLEARS                FALSE
-        #define GDISP_HARDWARE_FILLS                 FALSE
-        //#define GDISP_HARDWARE_BITFILLS              FALSE
-        #define GDISP_HARDWARE_SCROLL                FALSE
-        #define GDISP_HARDWARE_PIXELREAD             TRUE
-        #define GDISP_HARDWARE_CONTROL               TRUE
-        #define GDISP_HARDWARE_QUERY                 FALSE
-        #define GDISP_HARDWARE_CLIP                  FALSE
-
-        #define GDISP_PIXELFORMAT                    GDISP_PIXELFORMAT_RGB888
-    #endif
-
-// The custom format is not defined for some reason, so define it as error
-// so we don't get compiler warnings
-#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
-
-#define GDISP_USE_GFXNET                             FALSE
-//    #define GDISP_GFXNET_PORT                        13001
-//    #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP         FALSE
-//    #define GDISP_DONT_WAIT_FOR_NET_DISPLAY          FALSE
-//    #define GDISP_GFXNET_UNSAFE_SOCKETS              FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GWIN                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GWIN                                 FALSE
-
-//#define GWIN_NEED_WINDOWMANAGER                      FALSE
-//    #define GWIN_REDRAW_IMMEDIATE                    FALSE
-//    #define GWIN_REDRAW_SINGLEOP                     FALSE
-//    #define GWIN_NEED_FLASHING                       FALSE
-//        #define GWIN_FLASHING_PERIOD                 250
-
-//#define GWIN_NEED_CONSOLE                            FALSE
-//    #define GWIN_CONSOLE_USE_HISTORY                 FALSE
-//        #define GWIN_CONSOLE_HISTORY_AVERAGING       FALSE
-//        #define GWIN_CONSOLE_HISTORY_ATCREATE        FALSE
-//    #define GWIN_CONSOLE_ESCSEQ                      FALSE
-//    #define GWIN_CONSOLE_USE_BASESTREAM              FALSE
-//    #define GWIN_CONSOLE_USE_FLOAT                   FALSE
-//#define GWIN_NEED_GRAPH                              FALSE
-//#define GWIN_NEED_GL3D                               FALSE
-
-//#define GWIN_NEED_WIDGET                             FALSE
-//#define GWIN_FOCUS_HIGHLIGHT_WIDTH                   1
-//    #define GWIN_NEED_LABEL                          FALSE
-//        #define GWIN_LABEL_ATTRIBUTE                 FALSE
-//    #define GWIN_NEED_BUTTON                         FALSE
-//        #define GWIN_BUTTON_LAZY_RELEASE             FALSE
-//    #define GWIN_NEED_SLIDER                         FALSE
-//        #define GWIN_SLIDER_NOSNAP                   FALSE
-//        #define GWIN_SLIDER_DEAD_BAND                5
-//        #define GWIN_SLIDER_TOGGLE_INC               20
-//    #define GWIN_NEED_CHECKBOX                       FALSE
-//    #define GWIN_NEED_IMAGE                          FALSE
-//        #define GWIN_NEED_IMAGE_ANIMATION            FALSE
-//    #define GWIN_NEED_RADIO                          FALSE
-//    #define GWIN_NEED_LIST                           FALSE
-//        #define GWIN_NEED_LIST_IMAGES                FALSE
-//    #define GWIN_NEED_PROGRESSBAR                    FALSE
-//        #define GWIN_PROGRESSBAR_AUTO                FALSE
-//    #define GWIN_NEED_KEYBOARD                       FALSE
-//        #define GWIN_KEYBOARD_DEFAULT_LAYOUT         VirtualKeyboard_English1
-//        #define GWIN_NEED_KEYBOARD_ENGLISH1          TRUE
-//    #define GWIN_NEED_TEXTEDIT                       FALSE
-//    #define GWIN_FLAT_STYLING                        FALSE
-//    #define GWIN_WIDGET_TAGS                         FALSE
-
-//#define GWIN_NEED_CONTAINERS                         FALSE
-//    #define GWIN_NEED_CONTAINER                      FALSE
-//    #define GWIN_NEED_FRAME                          FALSE
-//    #define GWIN_NEED_TABSET                         FALSE
-//        #define GWIN_TABSET_TABHEIGHT                18
-
-
-///////////////////////////////////////////////////////////////////////////
-// GEVENT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GEVENT                               TRUE
-
-//#define GEVENT_ASSERT_NO_RESOURCE                    FALSE
-//#define GEVENT_MAXIMUM_SIZE                          32
-//#define GEVENT_MAX_SOURCE_LISTENERS                  32
-
-
-///////////////////////////////////////////////////////////////////////////
-// GTIMER                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GTIMER                               FALSE
-
-//#define GTIMER_THREAD_PRIORITY                       HIGH_PRIORITY
-//#define GTIMER_THREAD_WORKAREA_SIZE                  2048
-
-
-///////////////////////////////////////////////////////////////////////////
-// GQUEUE                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GQUEUE                               FALSE
-
-//#define GQUEUE_NEED_ASYNC                            FALSE
-//#define GQUEUE_NEED_GSYNC                            FALSE
-//#define GQUEUE_NEED_FSYNC                            FALSE
-//#define GQUEUE_NEED_BUFFERS                          FALSE
-
-///////////////////////////////////////////////////////////////////////////
-// GINPUT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GINPUT                               FALSE
-
-//#define GINPUT_NEED_MOUSE                            FALSE
-//    #define GINPUT_TOUCH_STARTRAW                    FALSE
-//    #define GINPUT_TOUCH_NOTOUCH                     FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE                 FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE_GUI             FALSE
-//    #define GINPUT_MOUSE_POLL_PERIOD                 25
-//    #define GINPUT_MOUSE_CLICK_TIME                  300
-//    #define GINPUT_TOUCH_CXTCLICK_TIME               700
-//    #define GINPUT_TOUCH_USER_CALIBRATION_LOAD       FALSE
-//    #define GINPUT_TOUCH_USER_CALIBRATION_SAVE       FALSE
-//    #define GMOUSE_DRIVER_LIST                       GMOUSEVMT_Win32, GMOUSEVMT_Win32
-//#define GINPUT_NEED_KEYBOARD                         FALSE
-//    #define GINPUT_KEYBOARD_POLL_PERIOD              200
-//    #define GKEYBOARD_DRIVER_LIST                    GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
-//    #define GKEYBOARD_LAYOUT_OFF                     FALSE
-//        #define GKEYBOARD_LAYOUT_SCANCODE2_US        FALSE
-//#define GINPUT_NEED_TOGGLE                           FALSE
-//#define GINPUT_NEED_DIAL                             FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GFILE                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GFILE                                FALSE
-
-//#define GFILE_NEED_PRINTG                            FALSE
-//#define GFILE_NEED_SCANG                             FALSE
-//#define GFILE_NEED_STRINGS                           FALSE
-//#define GFILE_NEED_FILELISTS                         FALSE
-//#define GFILE_NEED_STDIO                             FALSE
-//#define GFILE_NEED_NOAUTOMOUNT                       FALSE
-//#define GFILE_NEED_NOAUTOSYNC                        FALSE
-
-//#define GFILE_NEED_MEMFS                             FALSE
-//#define GFILE_NEED_ROMFS                             FALSE
-//#define GFILE_NEED_RAMFS                             FALSE
-//#define GFILE_NEED_FATFS                             FALSE
-//#define GFILE_NEED_NATIVEFS                          FALSE
-//#define GFILE_NEED_CHBIOSFS                          FALSE
-
-//#define GFILE_ALLOW_FLOATS                           FALSE
-//#define GFILE_ALLOW_DEVICESPECIFIC                   FALSE
-//#define GFILE_MAX_GFILES                             3
-
-///////////////////////////////////////////////////////////////////////////
-// GADC                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GADC                                 FALSE
-
-//#define GADC_MAX_LOWSPEED_DEVICES                    4
-
-
-///////////////////////////////////////////////////////////////////////////
-// GAUDIO                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GAUDIO                               FALSE
-// There seems to be a bug in the ugfx code, the wrong define is used
-// So define it in order to avoid warnings
-#define GFX_USE_GAUDIN                               GFX_USE_GAUDIO
-//    #define GAUDIO_NEED_PLAY                         FALSE
-//    #define GAUDIO_NEED_RECORD                       FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GMISC                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GMISC                                TRUE
-
-//#define GMISC_NEED_ARRAYOPS                          FALSE
-//#define GMISC_NEED_FASTTRIG                          FALSE
-//#define GMISC_NEED_FIXEDTRIG                         FALSE
-//#define GMISC_NEED_INVSQRT                           FALSE
-//    #define GMISC_INVSQRT_MIXED_ENDIAN               FALSE
-//    #define GMISC_INVSQRT_REAL_SLOW                  FALSE
-#define GMISC_NEED_MATRIXFLOAT2D                     TRUE
-#define GMISC_NEED_MATRIXFIXED2D                     FALSE
+#include "common_gfxconf.h"
 
 #endif /* _GFXCONF_H */
diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h
index 27dfb94fb..eb93f92eb 100644
--- a/keyboards/whitefox/gfxconf.h
+++ b/keyboards/whitefox/gfxconf.h
@@ -22,308 +22,10 @@
 #ifndef _GFXCONF_H
 #define _GFXCONF_H
 
-
-///////////////////////////////////////////////////////////////////////////
-// GOS - One of these must be defined, preferably in your Makefile       //
-///////////////////////////////////////////////////////////////////////////
-//#define GFX_USE_OS_CHIBIOS                           TRUE
-//#define GFX_USE_OS_FREERTOS                          FALSE
-//    #define GFX_FREERTOS_USE_TRACE                   FALSE
-//#define GFX_USE_OS_WIN32                             FALSE
-//#define GFX_USE_OS_LINUX                             FALSE
-//#define GFX_USE_OS_OSX                               FALSE
-//#define GFX_USE_OS_ECOS                              FALSE
-//#define GFX_USE_OS_RAWRTOS                           FALSE
-//#define GFX_USE_OS_ARDUINO                           FALSE
-//#define GFX_USE_OS_KEIL                              FALSE
-//#define GFX_USE_OS_CMSIS                             FALSE
-//#define GFX_USE_OS_RAW32                             FALSE
-//    #define INTERRUPTS_OFF()                         optional_code
-//    #define INTERRUPTS_ON()                          optional_code
-// These are not defined by default for some reason
-#define GOS_NEED_X_THREADS	FALSE
-#define GOS_NEED_X_HEAP		FALSE
-
-// Options that (should where relevant) apply to all operating systems
-    #define GFX_NO_INLINE                            FALSE
-//    #define GFX_COMPILER                             GFX_COMPILER_UNKNOWN
-//    #define GFX_CPU                                  GFX_CPU_UNKNOWN
-//    #define GFX_OS_HEAP_SIZE                         0
-//    #define GFX_OS_NO_INIT                           FALSE
-//    #define GFX_OS_INIT_NO_WARNING                   FALSE
-//    #define GFX_OS_PRE_INIT_FUNCTION                 myHardwareInitRoutine
-//    #define GFX_OS_EXTRA_INIT_FUNCTION               myOSInitRoutine
-//    #define GFX_OS_EXTRA_DEINIT_FUNCTION             myOSDeInitRoutine
-
-
-///////////////////////////////////////////////////////////////////////////
-// GDISP                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GDISP                                TRUE
-
-//#define GDISP_NEED_AUTOFLUSH                         FALSE
-//#define GDISP_NEED_TIMERFLUSH                        FALSE
-//#define GDISP_NEED_VALIDATION                        TRUE
-//#define GDISP_NEED_CLIP                              TRUE
-#define GDISP_NEED_CIRCLE                            TRUE
-#define GDISP_NEED_ELLIPSE                           TRUE
-#define GDISP_NEED_ARC                               TRUE
-#define GDISP_NEED_ARCSECTORS                        TRUE
-#define GDISP_NEED_CONVEX_POLYGON                    TRUE
-//#define GDISP_NEED_SCROLL                            FALSE
-#define GDISP_NEED_PIXELREAD                         TRUE
-#define GDISP_NEED_CONTROL                           TRUE
-//#define GDISP_NEED_QUERY                             FALSE
-//#define GDISP_NEED_MULTITHREAD                       FALSE
-//#define GDISP_NEED_STREAMING                         FALSE
-#define GDISP_NEED_TEXT                              TRUE
-//    #define GDISP_NEED_TEXT_WORDWRAP                 FALSE
-//    #define GDISP_NEED_ANTIALIAS                     FALSE
-//    #define GDISP_NEED_UTF8                          FALSE
-    #define GDISP_NEED_TEXT_KERNING                  TRUE
-//    #define GDISP_INCLUDE_FONT_UI1                   FALSE
-//    #define GDISP_INCLUDE_FONT_UI2                   FALSE		// The smallest preferred font.
-//    #define GDISP_INCLUDE_FONT_LARGENUMBERS          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS10          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32          FALSE
-    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12      TRUE
-//    #define GDISP_INCLUDE_FONT_FIXED_10X20           FALSE
-//    #define GDISP_INCLUDE_FONT_FIXED_7X14            FALSE
-    #define GDISP_INCLUDE_FONT_FIXED_5X8             TRUE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA   FALSE
-//    #define GDISP_INCLUDE_USER_FONTS                 FALSE
-
-//#define GDISP_NEED_IMAGE                             FALSE
-//    #define GDISP_NEED_IMAGE_NATIVE                  FALSE
-//    #define GDISP_NEED_IMAGE_GIF                     FALSE
-//    #define GDISP_NEED_IMAGE_BMP                     FALSE
-//        #define GDISP_NEED_IMAGE_BMP_1               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_16              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_24              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_32              FALSE
-//    #define GDISP_NEED_IMAGE_JPG                     FALSE
-//    #define GDISP_NEED_IMAGE_PNG                     FALSE
-//    #define GDISP_NEED_IMAGE_ACCOUNTING              FALSE
-#ifdef EMULATOR
-#define GDISP_NEED_PIXMAP                            TRUE
-#endif
-//    #define GDISP_NEED_PIXMAP_IMAGE                  FALSE
-
-//#define GDISP_DEFAULT_ORIENTATION                    GDISP_ROTATE_LANDSCAPE    // If not defined the native hardware orientation is used.
-//#define GDISP_LINEBUF_SIZE                           128
-//#define GDISP_STARTUP_COLOR                          Black
-#define GDISP_NEED_STARTUP_LOGO                      FALSE
-
-//#define GDISP_TOTAL_DISPLAYS		                 2
-
 #ifndef EMULATOR
 #define GDISP_DRIVER_LIST                            GDISPVMT_IS31FL3731C_QMK
 #endif
 
-    #ifdef GDISP_DRIVER_LIST
-        // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
-        #define GDISP_HARDWARE_STREAM_WRITE          FALSE
-        #define GDISP_HARDWARE_STREAM_READ           FALSE
-        #define GDISP_HARDWARE_STREAM_POS            FALSE
-        #define GDISP_HARDWARE_DRAWPIXEL             TRUE
-        #define GDISP_HARDWARE_CLEARS                FALSE
-        #define GDISP_HARDWARE_FILLS                 FALSE
-        //#define GDISP_HARDWARE_BITFILLS              FALSE
-        #define GDISP_HARDWARE_SCROLL                FALSE
-        #define GDISP_HARDWARE_PIXELREAD             TRUE
-        #define GDISP_HARDWARE_CONTROL               TRUE
-        #define GDISP_HARDWARE_QUERY                 FALSE
-        #define GDISP_HARDWARE_CLIP                  FALSE
-
-        #define GDISP_PIXELFORMAT                    GDISP_PIXELFORMAT_RGB888
-    #endif
-
-// The custom format is not defined for some reason, so define it as error
-// so we don't get compiler warnings
-#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
-
-#define GDISP_USE_GFXNET                             FALSE
-//    #define GDISP_GFXNET_PORT                        13001
-//    #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP         FALSE
-//    #define GDISP_DONT_WAIT_FOR_NET_DISPLAY          FALSE
-//    #define GDISP_GFXNET_UNSAFE_SOCKETS              FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GWIN                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GWIN                                 FALSE
-
-//#define GWIN_NEED_WINDOWMANAGER                      FALSE
-//    #define GWIN_REDRAW_IMMEDIATE                    FALSE
-//    #define GWIN_REDRAW_SINGLEOP                     FALSE
-//    #define GWIN_NEED_FLASHING                       FALSE
-//        #define GWIN_FLASHING_PERIOD                 250
-
-//#define GWIN_NEED_CONSOLE                            FALSE
-//    #define GWIN_CONSOLE_USE_HISTORY                 FALSE
-//        #define GWIN_CONSOLE_HISTORY_AVERAGING       FALSE
-//        #define GWIN_CONSOLE_HISTORY_ATCREATE        FALSE
-//    #define GWIN_CONSOLE_ESCSEQ                      FALSE
-//    #define GWIN_CONSOLE_USE_BASESTREAM              FALSE
-//    #define GWIN_CONSOLE_USE_FLOAT                   FALSE
-//#define GWIN_NEED_GRAPH                              FALSE
-//#define GWIN_NEED_GL3D                               FALSE
-
-//#define GWIN_NEED_WIDGET                             FALSE
-//#define GWIN_FOCUS_HIGHLIGHT_WIDTH                   1
-//    #define GWIN_NEED_LABEL                          FALSE
-//        #define GWIN_LABEL_ATTRIBUTE                 FALSE
-//    #define GWIN_NEED_BUTTON                         FALSE
-//        #define GWIN_BUTTON_LAZY_RELEASE             FALSE
-//    #define GWIN_NEED_SLIDER                         FALSE
-//        #define GWIN_SLIDER_NOSNAP                   FALSE
-//        #define GWIN_SLIDER_DEAD_BAND                5
-//        #define GWIN_SLIDER_TOGGLE_INC               20
-//    #define GWIN_NEED_CHECKBOX                       FALSE
-//    #define GWIN_NEED_IMAGE                          FALSE
-//        #define GWIN_NEED_IMAGE_ANIMATION            FALSE
-//    #define GWIN_NEED_RADIO                          FALSE
-//    #define GWIN_NEED_LIST                           FALSE
-//        #define GWIN_NEED_LIST_IMAGES                FALSE
-//    #define GWIN_NEED_PROGRESSBAR                    FALSE
-//        #define GWIN_PROGRESSBAR_AUTO                FALSE
-//    #define GWIN_NEED_KEYBOARD                       FALSE
-//        #define GWIN_KEYBOARD_DEFAULT_LAYOUT         VirtualKeyboard_English1
-//        #define GWIN_NEED_KEYBOARD_ENGLISH1          TRUE
-//    #define GWIN_NEED_TEXTEDIT                       FALSE
-//    #define GWIN_FLAT_STYLING                        FALSE
-//    #define GWIN_WIDGET_TAGS                         FALSE
-
-//#define GWIN_NEED_CONTAINERS                         FALSE
-//    #define GWIN_NEED_CONTAINER                      FALSE
-//    #define GWIN_NEED_FRAME                          FALSE
-//    #define GWIN_NEED_TABSET                         FALSE
-//        #define GWIN_TABSET_TABHEIGHT                18
-
-
-///////////////////////////////////////////////////////////////////////////
-// GEVENT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GEVENT                               TRUE
-
-//#define GEVENT_ASSERT_NO_RESOURCE                    FALSE
-//#define GEVENT_MAXIMUM_SIZE                          32
-//#define GEVENT_MAX_SOURCE_LISTENERS                  32
-
-
-///////////////////////////////////////////////////////////////////////////
-// GTIMER                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GTIMER                               FALSE
-
-//#define GTIMER_THREAD_PRIORITY                       HIGH_PRIORITY
-//#define GTIMER_THREAD_WORKAREA_SIZE                  2048
-
-
-///////////////////////////////////////////////////////////////////////////
-// GQUEUE                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GQUEUE                               FALSE
-
-//#define GQUEUE_NEED_ASYNC                            FALSE
-//#define GQUEUE_NEED_GSYNC                            FALSE
-//#define GQUEUE_NEED_FSYNC                            FALSE
-//#define GQUEUE_NEED_BUFFERS                          FALSE
-
-///////////////////////////////////////////////////////////////////////////
-// GINPUT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GINPUT                               FALSE
-
-//#define GINPUT_NEED_MOUSE                            FALSE
-//    #define GINPUT_TOUCH_STARTRAW                    FALSE
-//    #define GINPUT_TOUCH_NOTOUCH                     FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE                 FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE_GUI             FALSE
-//    #define GINPUT_MOUSE_POLL_PERIOD                 25
-//    #define GINPUT_MOUSE_CLICK_TIME                  300
-//    #define GINPUT_TOUCH_CXTCLICK_TIME               700
-//    #define GINPUT_TOUCH_USER_CALIBRATION_LOAD       FALSE
-//    #define GINPUT_TOUCH_USER_CALIBRATION_SAVE       FALSE
-//    #define GMOUSE_DRIVER_LIST                       GMOUSEVMT_Win32, GMOUSEVMT_Win32
-//#define GINPUT_NEED_KEYBOARD                         FALSE
-//    #define GINPUT_KEYBOARD_POLL_PERIOD              200
-//    #define GKEYBOARD_DRIVER_LIST                    GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
-//    #define GKEYBOARD_LAYOUT_OFF                     FALSE
-//        #define GKEYBOARD_LAYOUT_SCANCODE2_US        FALSE
-//#define GINPUT_NEED_TOGGLE                           FALSE
-//#define GINPUT_NEED_DIAL                             FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GFILE                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GFILE                                FALSE
-
-//#define GFILE_NEED_PRINTG                            FALSE
-//#define GFILE_NEED_SCANG                             FALSE
-//#define GFILE_NEED_STRINGS                           FALSE
-//#define GFILE_NEED_FILELISTS                         FALSE
-//#define GFILE_NEED_STDIO                             FALSE
-//#define GFILE_NEED_NOAUTOMOUNT                       FALSE
-//#define GFILE_NEED_NOAUTOSYNC                        FALSE
-
-//#define GFILE_NEED_MEMFS                             FALSE
-//#define GFILE_NEED_ROMFS                             FALSE
-//#define GFILE_NEED_RAMFS                             FALSE
-//#define GFILE_NEED_FATFS                             FALSE
-//#define GFILE_NEED_NATIVEFS                          FALSE
-//#define GFILE_NEED_CHBIOSFS                          FALSE
-
-//#define GFILE_ALLOW_FLOATS                           FALSE
-//#define GFILE_ALLOW_DEVICESPECIFIC                   FALSE
-//#define GFILE_MAX_GFILES                             3
-
-///////////////////////////////////////////////////////////////////////////
-// GADC                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GADC                                 FALSE
-
-//#define GADC_MAX_LOWSPEED_DEVICES                    4
-
-
-///////////////////////////////////////////////////////////////////////////
-// GAUDIO                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GAUDIO                               FALSE
-// There seems to be a bug in the ugfx code, the wrong define is used
-// So define it in order to avoid warnings
-#define GFX_USE_GAUDIN                               GFX_USE_GAUDIO
-//    #define GAUDIO_NEED_PLAY                         FALSE
-//    #define GAUDIO_NEED_RECORD                       FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GMISC                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GMISC                                TRUE
-
-//#define GMISC_NEED_ARRAYOPS                          FALSE
-//#define GMISC_NEED_FASTTRIG                          FALSE
-//#define GMISC_NEED_FIXEDTRIG                         FALSE
-//#define GMISC_NEED_INVSQRT                           FALSE
-//    #define GMISC_INVSQRT_MIXED_ENDIAN               FALSE
-//    #define GMISC_INVSQRT_REAL_SLOW                  FALSE
-#define GMISC_NEED_MATRIXFLOAT2D                     TRUE
-#define GMISC_NEED_MATRIXFIXED2D                     FALSE
+#include "common_gfxconf.h"
 
 #endif /* _GFXCONF_H */
diff --git a/quantum/visualizer/common_gfxconf.h b/quantum/visualizer/common_gfxconf.h
new file mode 100644
index 000000000..eb705b188
--- /dev/null
+++ b/quantum/visualizer/common_gfxconf.h
@@ -0,0 +1,325 @@
+/**
+ * This file has a different license to the rest of the uGFX system.
+ * You can copy, modify and distribute this file as you see fit.
+ * You do not need to publish your source modifications to this file.
+ * The only thing you are not permitted to do is to relicense it
+ * under a different license.
+ */
+
+/**
+ * Copy this file into your project directory and rename it as gfxconf.h
+ * Edit your copy to turn on the uGFX features you want to use.
+ * The values below are the defaults.
+ *
+ * Only remove the comments from lines where you want to change the
+ * default value. This allows definitions to be included from
+ * driver makefiles when required and provides the best future
+ * compatibility for your project.
+ *
+ * Please use spaces instead of tabs in this file.
+ */
+
+#ifndef COMMON_GFXCONF_H
+#define COMMON_GFXCONF_H
+
+
+///////////////////////////////////////////////////////////////////////////
+// GOS - One of these must be defined, preferably in your Makefile       //
+///////////////////////////////////////////////////////////////////////////
+//#define GFX_USE_OS_CHIBIOS                           TRUE
+//#define GFX_USE_OS_FREERTOS                          FALSE
+//    #define GFX_FREERTOS_USE_TRACE                   FALSE
+//#define GFX_USE_OS_WIN32                             FALSE
+//#define GFX_USE_OS_LINUX                             FALSE
+//#define GFX_USE_OS_OSX                               FALSE
+//#define GFX_USE_OS_ECOS                              FALSE
+//#define GFX_USE_OS_RAWRTOS                           FALSE
+//#define GFX_USE_OS_ARDUINO                           FALSE
+//#define GFX_USE_OS_KEIL                              FALSE
+//#define GFX_USE_OS_CMSIS                             FALSE
+//#define GFX_USE_OS_RAW32                             FALSE
+//    #define INTERRUPTS_OFF()                         optional_code
+//    #define INTERRUPTS_ON()                          optional_code
+// These are not defined by default for some reason
+#define GOS_NEED_X_THREADS	FALSE
+#define GOS_NEED_X_HEAP		FALSE
+
+// Options that (should where relevant) apply to all operating systems
+    #define GFX_NO_INLINE                            FALSE
+//    #define GFX_COMPILER                             GFX_COMPILER_UNKNOWN
+//    #define GFX_CPU                                  GFX_CPU_UNKNOWN
+//    #define GFX_OS_HEAP_SIZE                         0
+//    #define GFX_OS_NO_INIT                           FALSE
+//    #define GFX_OS_INIT_NO_WARNING                   FALSE
+//    #define GFX_OS_PRE_INIT_FUNCTION                 myHardwareInitRoutine
+//    #define GFX_OS_EXTRA_INIT_FUNCTION               myOSInitRoutine
+//    #define GFX_OS_EXTRA_DEINIT_FUNCTION             myOSDeInitRoutine
+
+
+///////////////////////////////////////////////////////////////////////////
+// GDISP                                                                 //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GDISP                                TRUE
+
+//#define GDISP_NEED_AUTOFLUSH                         FALSE
+//#define GDISP_NEED_TIMERFLUSH                        FALSE
+//#define GDISP_NEED_VALIDATION                        TRUE
+//#define GDISP_NEED_CLIP                              TRUE
+#define GDISP_NEED_CIRCLE                            TRUE
+#define GDISP_NEED_ELLIPSE                           TRUE
+#define GDISP_NEED_ARC                               TRUE
+#define GDISP_NEED_ARCSECTORS                        TRUE
+#define GDISP_NEED_CONVEX_POLYGON                    TRUE
+//#define GDISP_NEED_SCROLL                            FALSE
+#define GDISP_NEED_PIXELREAD                         TRUE
+#define GDISP_NEED_CONTROL                           TRUE
+//#define GDISP_NEED_QUERY                             FALSE
+//#define GDISP_NEED_MULTITHREAD                       FALSE
+//#define GDISP_NEED_STREAMING                         FALSE
+#define GDISP_NEED_TEXT                              TRUE
+//    #define GDISP_NEED_TEXT_WORDWRAP                 FALSE
+//    #define GDISP_NEED_ANTIALIAS                     FALSE
+//    #define GDISP_NEED_UTF8                          FALSE
+    #define GDISP_NEED_TEXT_KERNING                  TRUE
+//    #define GDISP_INCLUDE_FONT_UI1                   FALSE
+//    #define GDISP_INCLUDE_FONT_UI2                   FALSE		// The smallest preferred font.
+//    #define GDISP_INCLUDE_FONT_LARGENUMBERS          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS10          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32          FALSE
+    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12      TRUE
+//    #define GDISP_INCLUDE_FONT_FIXED_10X20           FALSE
+//    #define GDISP_INCLUDE_FONT_FIXED_7X14            FALSE
+    #define GDISP_INCLUDE_FONT_FIXED_5X8             TRUE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA   FALSE
+//    #define GDISP_INCLUDE_USER_FONTS                 FALSE
+
+//#define GDISP_NEED_IMAGE                             FALSE
+//    #define GDISP_NEED_IMAGE_NATIVE                  FALSE
+//    #define GDISP_NEED_IMAGE_GIF                     FALSE
+//    #define GDISP_NEED_IMAGE_BMP                     FALSE
+//        #define GDISP_NEED_IMAGE_BMP_1               FALSE
+//        #define GDISP_NEED_IMAGE_BMP_4               FALSE
+//        #define GDISP_NEED_IMAGE_BMP_4_RLE           FALSE
+//        #define GDISP_NEED_IMAGE_BMP_8               FALSE
+//        #define GDISP_NEED_IMAGE_BMP_8_RLE           FALSE
+//        #define GDISP_NEED_IMAGE_BMP_16              FALSE
+//        #define GDISP_NEED_IMAGE_BMP_24              FALSE
+//        #define GDISP_NEED_IMAGE_BMP_32              FALSE
+//    #define GDISP_NEED_IMAGE_JPG                     FALSE
+//    #define GDISP_NEED_IMAGE_PNG                     FALSE
+//    #define GDISP_NEED_IMAGE_ACCOUNTING              FALSE
+#ifdef EMULATOR
+#define GDISP_NEED_PIXMAP                            TRUE
+#endif
+//    #define GDISP_NEED_PIXMAP_IMAGE                  FALSE
+
+//#define GDISP_DEFAULT_ORIENTATION                    GDISP_ROTATE_LANDSCAPE    // If not defined the native hardware orientation is used.
+//#define GDISP_LINEBUF_SIZE                           128
+//#define GDISP_STARTUP_COLOR                          Black
+#define GDISP_NEED_STARTUP_LOGO                      FALSE
+
+//#define GDISP_TOTAL_DISPLAYS		                 2
+
+    #ifdef GDISP_DRIVER_LIST
+        // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
+        #define GDISP_HARDWARE_STREAM_WRITE          FALSE
+        #define GDISP_HARDWARE_STREAM_READ           FALSE
+        #define GDISP_HARDWARE_STREAM_POS            FALSE
+        #define GDISP_HARDWARE_DRAWPIXEL             TRUE
+        #define GDISP_HARDWARE_CLEARS                FALSE
+        #define GDISP_HARDWARE_FILLS                 FALSE
+        //#define GDISP_HARDWARE_BITFILLS              FALSE
+        #define GDISP_HARDWARE_SCROLL                FALSE
+        #define GDISP_HARDWARE_PIXELREAD             TRUE
+        #define GDISP_HARDWARE_CONTROL               TRUE
+        #define GDISP_HARDWARE_QUERY                 FALSE
+        #define GDISP_HARDWARE_CLIP                  FALSE
+
+        #define GDISP_PIXELFORMAT                    GDISP_PIXELFORMAT_RGB888
+    #endif
+
+// The custom format is not defined for some reason, so define it as error
+// so we don't get compiler warnings
+#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
+
+#define GDISP_USE_GFXNET                             FALSE
+//    #define GDISP_GFXNET_PORT                        13001
+//    #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP         FALSE
+//    #define GDISP_DONT_WAIT_FOR_NET_DISPLAY          FALSE
+//    #define GDISP_GFXNET_UNSAFE_SOCKETS              FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GWIN                                                                  //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GWIN                                 FALSE
+
+//#define GWIN_NEED_WINDOWMANAGER                      FALSE
+//    #define GWIN_REDRAW_IMMEDIATE                    FALSE
+//    #define GWIN_REDRAW_SINGLEOP                     FALSE
+//    #define GWIN_NEED_FLASHING                       FALSE
+//        #define GWIN_FLASHING_PERIOD                 250
+
+//#define GWIN_NEED_CONSOLE                            FALSE
+//    #define GWIN_CONSOLE_USE_HISTORY                 FALSE
+//        #define GWIN_CONSOLE_HISTORY_AVERAGING       FALSE
+//        #define GWIN_CONSOLE_HISTORY_ATCREATE        FALSE
+//    #define GWIN_CONSOLE_ESCSEQ                      FALSE
+//    #define GWIN_CONSOLE_USE_BASESTREAM              FALSE
+//    #define GWIN_CONSOLE_USE_FLOAT                   FALSE
+//#define GWIN_NEED_GRAPH                              FALSE
+//#define GWIN_NEED_GL3D                               FALSE
+
+//#define GWIN_NEED_WIDGET                             FALSE
+//#define GWIN_FOCUS_HIGHLIGHT_WIDTH                   1
+//    #define GWIN_NEED_LABEL                          FALSE
+//        #define GWIN_LABEL_ATTRIBUTE                 FALSE
+//    #define GWIN_NEED_BUTTON                         FALSE
+//        #define GWIN_BUTTON_LAZY_RELEASE             FALSE
+//    #define GWIN_NEED_SLIDER                         FALSE
+//        #define GWIN_SLIDER_NOSNAP                   FALSE
+//        #define GWIN_SLIDER_DEAD_BAND                5
+//        #define GWIN_SLIDER_TOGGLE_INC               20
+//    #define GWIN_NEED_CHECKBOX                       FALSE
+//    #define GWIN_NEED_IMAGE                          FALSE
+//        #define GWIN_NEED_IMAGE_ANIMATION            FALSE
+//    #define GWIN_NEED_RADIO                          FALSE
+//    #define GWIN_NEED_LIST                           FALSE
+//        #define GWIN_NEED_LIST_IMAGES                FALSE
+//    #define GWIN_NEED_PROGRESSBAR                    FALSE
+//        #define GWIN_PROGRESSBAR_AUTO                FALSE
+//    #define GWIN_NEED_KEYBOARD                       FALSE
+//        #define GWIN_KEYBOARD_DEFAULT_LAYOUT         VirtualKeyboard_English1
+//        #define GWIN_NEED_KEYBOARD_ENGLISH1          TRUE
+//    #define GWIN_NEED_TEXTEDIT                       FALSE
+//    #define GWIN_FLAT_STYLING                        FALSE
+//    #define GWIN_WIDGET_TAGS                         FALSE
+
+//#define GWIN_NEED_CONTAINERS                         FALSE
+//    #define GWIN_NEED_CONTAINER                      FALSE
+//    #define GWIN_NEED_FRAME                          FALSE
+//    #define GWIN_NEED_TABSET                         FALSE
+//        #define GWIN_TABSET_TABHEIGHT                18
+
+
+///////////////////////////////////////////////////////////////////////////
+// GEVENT                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GEVENT                               TRUE
+
+//#define GEVENT_ASSERT_NO_RESOURCE                    FALSE
+//#define GEVENT_MAXIMUM_SIZE                          32
+//#define GEVENT_MAX_SOURCE_LISTENERS                  32
+
+
+///////////////////////////////////////////////////////////////////////////
+// GTIMER                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GTIMER                               FALSE
+
+//#define GTIMER_THREAD_PRIORITY                       HIGH_PRIORITY
+//#define GTIMER_THREAD_WORKAREA_SIZE                  2048
+
+
+///////////////////////////////////////////////////////////////////////////
+// GQUEUE                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GQUEUE                               FALSE
+
+//#define GQUEUE_NEED_ASYNC                            FALSE
+//#define GQUEUE_NEED_GSYNC                            FALSE
+//#define GQUEUE_NEED_FSYNC                            FALSE
+//#define GQUEUE_NEED_BUFFERS                          FALSE
+
+///////////////////////////////////////////////////////////////////////////
+// GINPUT                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GINPUT                               FALSE
+
+//#define GINPUT_NEED_MOUSE                            FALSE
+//    #define GINPUT_TOUCH_STARTRAW                    FALSE
+//    #define GINPUT_TOUCH_NOTOUCH                     FALSE
+//    #define GINPUT_TOUCH_NOCALIBRATE                 FALSE
+//    #define GINPUT_TOUCH_NOCALIBRATE_GUI             FALSE
+//    #define GINPUT_MOUSE_POLL_PERIOD                 25
+//    #define GINPUT_MOUSE_CLICK_TIME                  300
+//    #define GINPUT_TOUCH_CXTCLICK_TIME               700
+//    #define GINPUT_TOUCH_USER_CALIBRATION_LOAD       FALSE
+//    #define GINPUT_TOUCH_USER_CALIBRATION_SAVE       FALSE
+//    #define GMOUSE_DRIVER_LIST                       GMOUSEVMT_Win32, GMOUSEVMT_Win32
+//#define GINPUT_NEED_KEYBOARD                         FALSE
+//    #define GINPUT_KEYBOARD_POLL_PERIOD              200
+//    #define GKEYBOARD_DRIVER_LIST                    GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
+//    #define GKEYBOARD_LAYOUT_OFF                     FALSE
+//        #define GKEYBOARD_LAYOUT_SCANCODE2_US        FALSE
+//#define GINPUT_NEED_TOGGLE                           FALSE
+//#define GINPUT_NEED_DIAL                             FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GFILE                                                                 //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GFILE                                FALSE
+
+//#define GFILE_NEED_PRINTG                            FALSE
+//#define GFILE_NEED_SCANG                             FALSE
+//#define GFILE_NEED_STRINGS                           FALSE
+//#define GFILE_NEED_FILELISTS                         FALSE
+//#define GFILE_NEED_STDIO                             FALSE
+//#define GFILE_NEED_NOAUTOMOUNT                       FALSE
+//#define GFILE_NEED_NOAUTOSYNC                        FALSE
+
+//#define GFILE_NEED_MEMFS                             FALSE
+//#define GFILE_NEED_ROMFS                             FALSE
+//#define GFILE_NEED_RAMFS                             FALSE
+//#define GFILE_NEED_FATFS                             FALSE
+//#define GFILE_NEED_NATIVEFS                          FALSE
+//#define GFILE_NEED_CHBIOSFS                          FALSE
+
+//#define GFILE_ALLOW_FLOATS                           FALSE
+//#define GFILE_ALLOW_DEVICESPECIFIC                   FALSE
+//#define GFILE_MAX_GFILES                             3
+
+///////////////////////////////////////////////////////////////////////////
+// GADC                                                                  //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GADC                                 FALSE
+
+//#define GADC_MAX_LOWSPEED_DEVICES                    4
+
+
+///////////////////////////////////////////////////////////////////////////
+// GAUDIO                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GAUDIO                               FALSE
+// There seems to be a bug in the ugfx code, the wrong define is used
+// So define it in order to avoid warnings
+#define GFX_USE_GAUDIN                               GFX_USE_GAUDIO
+//    #define GAUDIO_NEED_PLAY                         FALSE
+//    #define GAUDIO_NEED_RECORD                       FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GMISC                                                                 //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GMISC                                TRUE
+
+//#define GMISC_NEED_ARRAYOPS                          FALSE
+//#define GMISC_NEED_FASTTRIG                          FALSE
+//#define GMISC_NEED_FIXEDTRIG                         FALSE
+//#define GMISC_NEED_INVSQRT                           FALSE
+//    #define GMISC_INVSQRT_MIXED_ENDIAN               FALSE
+//    #define GMISC_INVSQRT_REAL_SLOW                  FALSE
+#define GMISC_NEED_MATRIXFLOAT2D                     TRUE
+#define GMISC_NEED_MATRIXFIXED2D                     FALSE
+
+#endif /* COMMON_GFXCONF_H */
diff --git a/quantum/visualizer/visualizer.mk b/quantum/visualizer/visualizer.mk
index 0f7d8636c..1fe7435d9 100644
--- a/quantum/visualizer/visualizer.mk
+++ b/quantum/visualizer/visualizer.mk
@@ -47,6 +47,9 @@ SRC += $(VISUALIZER_DIR)/led_keyframes.c
 endif
 
 include $(GFXLIB)/gfx.mk
+# For the common_gfxconf.h
+GFXINC += quantum/visualizer
+
 GFXSRC := $(patsubst $(TOP_DIR)/%,%,$(GFXSRC))
 GFXDEFS := $(patsubst %,-D%,$(patsubst -D%,%,$(GFXDEFS)))
 
-- 
cgit v1.2.3-70-g09d2


From 2251560256ff1a139178dc80b18dd8ef1d8e83d6 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 9 Jul 2017 17:46:51 +0300
Subject: Clarify naming between LCD_BACKLIGHT and LED_BACKLIGHT

---
 keyboards/ergodox/infinity/animations.c        |  44 ++++----
 keyboards/ergodox/infinity/simple_visualizer.h |   2 +-
 keyboards/ergodox/infinity/visualizer.c        |   4 +-
 keyboards/whitefox/animations.c                |  36 +++----
 lcd_backlight_keyframes.h                      |  30 ++++++
 quantum/visualizer/lcd_backlight_keyframes.c   |   8 +-
 quantum/visualizer/lcd_backlight_keyframes.h   |  30 ------
 quantum/visualizer/led_backlight_keyframes.c   | 143 +++++++++++++++++++++++++
 quantum/visualizer/led_backlight_keyframes.h   |  44 ++++++++
 quantum/visualizer/led_keyframes.c             | 143 -------------------------
 quantum/visualizer/led_keyframes.h             |  44 --------
 quantum/visualizer/visualizer.mk               |   2 +-
 12 files changed, 265 insertions(+), 265 deletions(-)
 create mode 100644 lcd_backlight_keyframes.h
 delete mode 100644 quantum/visualizer/lcd_backlight_keyframes.h
 create mode 100644 quantum/visualizer/led_backlight_keyframes.c
 create mode 100644 quantum/visualizer/led_backlight_keyframes.h
 delete mode 100644 quantum/visualizer/led_keyframes.c
 delete mode 100644 quantum/visualizer/led_keyframes.h

(limited to 'keyboards')

diff --git a/keyboards/ergodox/infinity/animations.c b/keyboards/ergodox/infinity/animations.c
index ebc08fde3..faac96215 100644
--- a/keyboards/ergodox/infinity/animations.c
+++ b/keyboards/ergodox/infinity/animations.c
@@ -26,7 +26,7 @@
 #endif
 
 #ifdef BACKLIGHT_ENABLE
-#include "led_keyframes.h"
+#include "led_backlight_keyframes.h"
 #endif
 
 #include "visualizer_keyframes.h"
@@ -39,10 +39,10 @@ static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t*
     lcd_keyframe_enable(animation, state);
 #endif
 #ifdef LCD_BACKLIGHT_ENABLE
-    backlight_keyframe_enable(animation, state);
+    lcd_backlight_keyframe_enable(animation, state);
 #endif
 #ifdef BACKLIGHT_ENABLE
-    led_keyframe_enable(animation, state);
+    led_backlight_keyframe_enable(animation, state);
 #endif
     return false;
 }
@@ -52,10 +52,10 @@ static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t
     lcd_keyframe_disable(animation, state);
 #endif
 #ifdef LCD_BACKLIGHT_ENABLE
-    backlight_keyframe_disable(animation, state);
+    lcd_backlight_keyframe_disable(animation, state);
 #endif
 #ifdef BACKLIGHT_ENABLE
-    led_keyframe_disable(animation, state);
+    led_backlight_keyframe_disable(animation, state);
 #endif
     return false;
 }
@@ -63,10 +63,10 @@ static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t
 static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
     bool ret = false;
 #ifdef LCD_BACKLIGHT_ENABLE
-    ret |= backlight_keyframe_animate_color(animation, state);
+    ret |= lcd_backlight_keyframe_animate_color(animation, state);
 #endif
 #ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_in_all(animation, state);
+    ret |= led_backlight_keyframe_fade_in_all(animation, state);
 #endif
     return ret;
 }
@@ -74,10 +74,10 @@ static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t
 static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
     bool ret = false;
 #ifdef LCD_BACKLIGHT_ENABLE
-    ret |= backlight_keyframe_animate_color(animation, state);
+    ret |= lcd_backlight_keyframe_animate_color(animation, state);
 #endif
 #ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_out_all(animation, state);
+    ret |= led_backlight_keyframe_fade_out_all(animation, state);
 #endif
     return ret;
 }
@@ -133,20 +133,20 @@ keyframe_animation_t led_test_animation = {
 
     },
     .frame_functions = {
-        led_keyframe_fade_in_all,
+        led_backlight_keyframe_fade_in_all,
         keyframe_no_operation,
-        led_keyframe_fade_out_all,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_mirror_orientation,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_normal_orientation,
-        led_keyframe_crossfade,
+        led_backlight_keyframe_fade_out_all,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_left_to_right_gradient,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_top_to_bottom_gradient,
+        led_backlight_keyframe_mirror_orientation,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_left_to_right_gradient,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_top_to_bottom_gradient,
+        led_backlight_keyframe_normal_orientation,
+        led_backlight_keyframe_crossfade,
     },
 };
 #endif
diff --git a/keyboards/ergodox/infinity/simple_visualizer.h b/keyboards/ergodox/infinity/simple_visualizer.h
index ded8a3222..88e96f2af 100644
--- a/keyboards/ergodox/infinity/simple_visualizer.h
+++ b/keyboards/ergodox/infinity/simple_visualizer.h
@@ -58,7 +58,7 @@ static keyframe_animation_t color_animation = {
     // this prevents the color from changing when activating the layer
     // momentarily
     .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)},
-    .frame_functions = {keyframe_no_operation, backlight_keyframe_animate_color},
+    .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color},
 };
 
 void initialize_user_visualizer(visualizer_state_t* state) {
diff --git a/keyboards/ergodox/infinity/visualizer.c b/keyboards/ergodox/infinity/visualizer.c
index 5b6b32007..047a1119c 100644
--- a/keyboards/ergodox/infinity/visualizer.c
+++ b/keyboards/ergodox/infinity/visualizer.c
@@ -79,7 +79,7 @@ static keyframe_animation_t one_led_color = {
     .num_frames = 1,
     .loop = false,
     .frame_lengths = {gfxMillisecondsToTicks(0)},
-    .frame_functions = {backlight_keyframe_set_color},
+    .frame_functions = {lcd_backlight_keyframe_set_color},
 };
 
 bool swap_led_target_color(keyframe_animation_t* animation, visualizer_state_t* state) {
@@ -94,7 +94,7 @@ static keyframe_animation_t two_led_colors = {
     .num_frames = 2,
     .loop = true,
     .frame_lengths = {gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(0)},
-    .frame_functions = {backlight_keyframe_set_color, swap_led_target_color},
+    .frame_functions = {lcd_backlight_keyframe_set_color, swap_led_target_color},
 };
 
 // The LCD animation alternates between the layer name display and a
diff --git a/keyboards/whitefox/animations.c b/keyboards/whitefox/animations.c
index ed1d75efb..a15d46ccd 100644
--- a/keyboards/whitefox/animations.c
+++ b/keyboards/whitefox/animations.c
@@ -20,7 +20,7 @@
 #include "visualizer.h"
 
 #ifdef BACKLIGHT_ENABLE
-#include "led_keyframes.h"
+#include "led_backlight_keyframes.h"
 #endif
 
 #include "visualizer_keyframes.h"
@@ -30,14 +30,14 @@
 
 static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
 #ifdef BACKLIGHT_ENABLE
-    led_keyframe_enable(animation, state);
+    led_backlight_keyframe_enable(animation, state);
 #endif
     return false;
 }
 
 static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
 #ifdef BACKLIGHT_ENABLE
-    led_keyframe_disable(animation, state);
+    led_backlight_keyframe_disable(animation, state);
 #endif
     return false;
 }
@@ -45,7 +45,7 @@ static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t
 static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
     bool ret = false;
 #ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_in_all(animation, state);
+    ret |= led_backlight_keyframe_fade_in_all(animation, state);
 #endif
     return ret;
 }
@@ -53,7 +53,7 @@ static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t
 static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
     bool ret = false;
 #ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_out_all(animation, state);
+    ret |= led_backlight_keyframe_fade_out_all(animation, state);
 #endif
     return ret;
 }
@@ -107,20 +107,20 @@ keyframe_animation_t led_test_animation = {
 
     },
     .frame_functions = {
-        led_keyframe_fade_in_all,
+        led_backlight_keyframe_fade_in_all,
         keyframe_no_operation,
-        led_keyframe_fade_out_all,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_mirror_orientation,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_normal_orientation,
-        led_keyframe_crossfade,
+        led_backlight_keyframe_fade_out_all,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_left_to_right_gradient,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_top_to_bottom_gradient,
+        led_backlight_keyframe_mirror_orientation,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_left_to_right_gradient,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_top_to_bottom_gradient,
+        led_backlight_keyframe_normal_orientation,
+        led_backlight_keyframe_crossfade,
     },
 };
 #endif
diff --git a/lcd_backlight_keyframes.h b/lcd_backlight_keyframes.h
new file mode 100644
index 000000000..bde118449
--- /dev/null
+++ b/lcd_backlight_keyframes.h
@@ -0,0 +1,30 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_
+#define QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_
+
+#include "visualizer.h"
+
+// Animates the LCD backlight color between the current color and the target color (of the state)
+bool lcd_backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state);
+// Sets the backlight color to the target color
+bool lcd_backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state);
+
+bool lcd_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
+bool lcd_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
+
+#endif /* QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ */
diff --git a/quantum/visualizer/lcd_backlight_keyframes.c b/quantum/visualizer/lcd_backlight_keyframes.c
index 8436d4e3d..8c402baf6 100644
--- a/quantum/visualizer/lcd_backlight_keyframes.c
+++ b/quantum/visualizer/lcd_backlight_keyframes.c
@@ -16,7 +16,7 @@
 
 #include "lcd_backlight_keyframes.h"
 
-bool backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state) {
+bool lcd_backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state) {
     int frame_length = animation->frame_lengths[animation->current_frame];
     int current_pos = frame_length - animation->time_left_in_frame;
     uint8_t t_h = LCD_HUE(state->target_lcd_color);
@@ -49,7 +49,7 @@ bool backlight_keyframe_animate_color(keyframe_animation_t* animation, visualize
     return true;
 }
 
-bool backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state) {
+bool lcd_backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state) {
     (void)animation;
     state->prev_lcd_color = state->target_lcd_color;
     state->current_lcd_color = state->target_lcd_color;
@@ -60,14 +60,14 @@ bool backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_st
     return false;
 }
 
-bool backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
+bool lcd_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
     (void)animation;
     (void)state;
     lcd_backlight_hal_color(0, 0, 0);
     return false;
 }
 
-bool backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
+bool lcd_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
     (void)animation;
     (void)state;
     lcd_backlight_color(LCD_HUE(state->current_lcd_color),
diff --git a/quantum/visualizer/lcd_backlight_keyframes.h b/quantum/visualizer/lcd_backlight_keyframes.h
deleted file mode 100644
index e1c125cf9..000000000
--- a/quantum/visualizer/lcd_backlight_keyframes.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_
-#define QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_
-
-#include "visualizer.h"
-
-// Animates the LCD backlight color between the current color and the target color (of the state)
-bool backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state);
-// Sets the backlight color to the target color
-bool backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state);
-
-bool backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
-bool backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
-
-#endif /* QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ */
diff --git a/quantum/visualizer/led_backlight_keyframes.c b/quantum/visualizer/led_backlight_keyframes.c
new file mode 100644
index 000000000..d2921a391
--- /dev/null
+++ b/quantum/visualizer/led_backlight_keyframes.c
@@ -0,0 +1,143 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 Fred Sundvik
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+*/
+#include "gfx.h"
+#include "math.h"
+#include "led_backlight_keyframes.h"
+
+static uint8_t fade_led_color(keyframe_animation_t* animation, int from, int to) {
+    int frame_length = animation->frame_lengths[animation->current_frame];
+    int current_pos = frame_length - animation->time_left_in_frame;
+    int delta = to - from;
+    int luma = (delta * current_pos) / frame_length;
+    luma += from;
+    return luma;
+}
+
+static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint8_t from, uint8_t to) {
+    uint8_t luma = fade_led_color(animation, from, to);
+    color_t color = LUMA2COLOR(luma);
+    gdispGClear(LED_DISPLAY, color);
+}
+
+// TODO: Should be customizable per keyboard
+#define NUM_ROWS LED_NUM_ROWS
+#define NUM_COLS LED_NUM_COLS
+
+static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS];
+static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS];
+
+static uint8_t compute_gradient_color(float t, float index, float num) {
+    const float two_pi = M_PI * 2.0f;
+    float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi;
+    float x = t * two_pi + normalized_index;
+    float v = 0.5 * (cosf(x) + 1.0f);
+    return (uint8_t)(255.0f * v);
+}
+
+bool led_backlight_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    keyframe_fade_all_leds_from_to(animation, 0, 255);
+    return true;
+}
+
+bool led_backlight_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    keyframe_fade_all_leds_from_to(animation, 255, 0);
+    return true;
+}
+
+bool led_backlight_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    float frame_length = animation->frame_lengths[animation->current_frame];
+    float current_pos = frame_length - animation->time_left_in_frame;
+    float t = current_pos / frame_length;
+    for (int i=0; i< NUM_COLS; i++) {
+        uint8_t color = compute_gradient_color(t, i, NUM_COLS);
+        gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color));
+    }
+    return true;
+}
+
+bool led_backlight_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    float frame_length = animation->frame_lengths[animation->current_frame];
+    float current_pos = frame_length - animation->time_left_in_frame;
+    float t = current_pos / frame_length;
+    for (int i=0; i< NUM_ROWS; i++) {
+        uint8_t color = compute_gradient_color(t, i, NUM_ROWS);
+        gdispGDrawLine(LED_DISPLAY, 0, i, NUM_COLS - 1, i, LUMA2COLOR(color));
+    }
+    return true;
+}
+
+static void copy_current_led_state(uint8_t* dest) {
+    for (int i=0;i<NUM_ROWS;i++) {
+        for (int j=0;j<NUM_COLS;j++) {
+            dest[i*NUM_COLS + j] = gdispGGetPixelColor(LED_DISPLAY, j, i);
+        }
+    }
+}
+bool led_backlight_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    if (animation->first_update_of_frame) {
+        copy_current_led_state(&crossfade_start_frame[0][0]);
+        run_next_keyframe(animation, state);
+        copy_current_led_state(&crossfade_end_frame[0][0]);
+    }
+    for (int i=0;i<NUM_ROWS;i++) {
+        for (int j=0;j<NUM_COLS;j++) {
+            color_t color  = LUMA2COLOR(fade_led_color(animation, crossfade_start_frame[i][j], crossfade_end_frame[i][j]));
+            gdispGDrawPixel(LED_DISPLAY, j, i, color);
+        }
+    }
+    return true;
+}
+
+bool led_backlight_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    (void)animation;
+    gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_180);
+    return false;
+}
+
+bool led_backlight_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    (void)animation;
+    gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_0);
+    return false;
+}
+
+bool led_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    (void)animation;
+    gdispGSetPowerMode(LED_DISPLAY, powerOff);
+    return false;
+}
+
+bool led_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    (void)animation;
+    gdispGSetPowerMode(LED_DISPLAY, powerOn);
+    return false;
+}
diff --git a/quantum/visualizer/led_backlight_keyframes.h b/quantum/visualizer/led_backlight_keyframes.h
new file mode 100644
index 000000000..487151013
--- /dev/null
+++ b/quantum/visualizer/led_backlight_keyframes.h
@@ -0,0 +1,44 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 Fred Sundvik
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+*/
+
+#ifndef LED_BACKLIGHT_KEYFRAMES_H
+#define LED_BACKLIGHT_KEYFRAMES_H
+
+#include "visualizer.h"
+
+bool led_backlight_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state);
+
+bool led_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
+
+extern keyframe_animation_t led_test_animation;
+
+
+#endif /* LED_KEYFRAMES_H */
diff --git a/quantum/visualizer/led_keyframes.c b/quantum/visualizer/led_keyframes.c
deleted file mode 100644
index 7e6e5d1ab..000000000
--- a/quantum/visualizer/led_keyframes.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
-The MIT License (MIT)
-
-Copyright (c) 2016 Fred Sundvik
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-*/
-#include "gfx.h"
-#include "math.h"
-#include "led_keyframes.h"
-
-static uint8_t fade_led_color(keyframe_animation_t* animation, int from, int to) {
-    int frame_length = animation->frame_lengths[animation->current_frame];
-    int current_pos = frame_length - animation->time_left_in_frame;
-    int delta = to - from;
-    int luma = (delta * current_pos) / frame_length;
-    luma += from;
-    return luma;
-}
-
-static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint8_t from, uint8_t to) {
-    uint8_t luma = fade_led_color(animation, from, to);
-    color_t color = LUMA2COLOR(luma);
-    gdispGClear(LED_DISPLAY, color);
-}
-
-// TODO: Should be customizable per keyboard
-#define NUM_ROWS LED_NUM_ROWS
-#define NUM_COLS LED_NUM_COLS
-
-static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS];
-static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS];
-
-static uint8_t compute_gradient_color(float t, float index, float num) {
-    const float two_pi = M_PI * 2.0f;
-    float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi;
-    float x = t * two_pi + normalized_index;
-    float v = 0.5 * (cosf(x) + 1.0f);
-    return (uint8_t)(255.0f * v);
-}
-
-bool led_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state) {
-    (void)state;
-    keyframe_fade_all_leds_from_to(animation, 0, 255);
-    return true;
-}
-
-bool led_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state) {
-    (void)state;
-    keyframe_fade_all_leds_from_to(animation, 255, 0);
-    return true;
-}
-
-bool led_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state) {
-    (void)state;
-    float frame_length = animation->frame_lengths[animation->current_frame];
-    float current_pos = frame_length - animation->time_left_in_frame;
-    float t = current_pos / frame_length;
-    for (int i=0; i< NUM_COLS; i++) {
-        uint8_t color = compute_gradient_color(t, i, NUM_COLS);
-        gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color));
-    }
-    return true;
-}
-
-bool led_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state) {
-    (void)state;
-    float frame_length = animation->frame_lengths[animation->current_frame];
-    float current_pos = frame_length - animation->time_left_in_frame;
-    float t = current_pos / frame_length;
-    for (int i=0; i< NUM_ROWS; i++) {
-        uint8_t color = compute_gradient_color(t, i, NUM_ROWS);
-        gdispGDrawLine(LED_DISPLAY, 0, i, NUM_COLS - 1, i, LUMA2COLOR(color));
-    }
-    return true;
-}
-
-static void copy_current_led_state(uint8_t* dest) {
-    for (int i=0;i<NUM_ROWS;i++) {
-        for (int j=0;j<NUM_COLS;j++) {
-            dest[i*NUM_COLS + j] = gdispGGetPixelColor(LED_DISPLAY, j, i);
-        }
-    }
-}
-bool led_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state) {
-    (void)state;
-    if (animation->first_update_of_frame) {
-        copy_current_led_state(&crossfade_start_frame[0][0]);
-        run_next_keyframe(animation, state);
-        copy_current_led_state(&crossfade_end_frame[0][0]);
-    }
-    for (int i=0;i<NUM_ROWS;i++) {
-        for (int j=0;j<NUM_COLS;j++) {
-            color_t color  = LUMA2COLOR(fade_led_color(animation, crossfade_start_frame[i][j], crossfade_end_frame[i][j]));
-            gdispGDrawPixel(LED_DISPLAY, j, i, color);
-        }
-    }
-    return true;
-}
-
-bool led_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state) {
-    (void)state;
-    (void)animation;
-    gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_180);
-    return false;
-}
-
-bool led_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state) {
-    (void)state;
-    (void)animation;
-    gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_0);
-    return false;
-}
-
-bool led_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
-    (void)state;
-    (void)animation;
-    gdispGSetPowerMode(LED_DISPLAY, powerOff);
-    return false;
-}
-
-bool led_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
-    (void)state;
-    (void)animation;
-    gdispGSetPowerMode(LED_DISPLAY, powerOn);
-    return false;
-}
diff --git a/quantum/visualizer/led_keyframes.h b/quantum/visualizer/led_keyframes.h
deleted file mode 100644
index a59a4f37d..000000000
--- a/quantum/visualizer/led_keyframes.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-The MIT License (MIT)
-
-Copyright (c) 2016 Fred Sundvik
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-*/
-
-#ifndef LED_KEYFRAMES_H
-#define LED_KEYFRAMES_H
-
-#include "visualizer.h"
-
-bool led_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state);
-
-bool led_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
-
-extern keyframe_animation_t led_test_animation;
-
-
-#endif /* LED_KEYFRAMES_H */
diff --git a/quantum/visualizer/visualizer.mk b/quantum/visualizer/visualizer.mk
index 1fe7435d9..a04c9775f 100644
--- a/quantum/visualizer/visualizer.mk
+++ b/quantum/visualizer/visualizer.mk
@@ -43,7 +43,7 @@ OPT_DEFS += -DLCD_BACKLIGHT_ENABLE
 endif
 
 ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
-SRC += $(VISUALIZER_DIR)/led_keyframes.c
+SRC += $(VISUALIZER_DIR)/led_backlight_keyframes.c
 endif
 
 include $(GFXLIB)/gfx.mk
-- 
cgit v1.2.3-70-g09d2


From 4da3b19603255115f71812964383ee7b518637be Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 9 Jul 2017 17:50:01 +0300
Subject: Shared default animations

---
 keyboards/ergodox/infinity/animations.c        | 154 ----------------------
 keyboards/ergodox/infinity/animations.h        |  30 -----
 keyboards/ergodox/infinity/rules.mk            |   3 +-
 keyboards/ergodox/infinity/simple_visualizer.h |   2 +-
 keyboards/ergodox/infinity/visualizer.c        |   2 +-
 keyboards/whitefox/animations.c                | 128 ------------------
 keyboards/whitefox/animations.h                |  30 -----
 keyboards/whitefox/rules.mk                    |   3 +-
 keyboards/whitefox/visualizer.c                |   2 +-
 quantum/visualizer/default_animations.c        | 176 +++++++++++++++++++++++++
 quantum/visualizer/default_animations.h        |  30 +++++
 quantum/visualizer/visualizer.mk               |   2 +
 12 files changed, 213 insertions(+), 349 deletions(-)
 delete mode 100644 keyboards/ergodox/infinity/animations.c
 delete mode 100644 keyboards/ergodox/infinity/animations.h
 delete mode 100644 keyboards/whitefox/animations.c
 delete mode 100644 keyboards/whitefox/animations.h
 create mode 100644 quantum/visualizer/default_animations.c
 create mode 100644 quantum/visualizer/default_animations.h

(limited to 'keyboards')

diff --git a/keyboards/ergodox/infinity/animations.c b/keyboards/ergodox/infinity/animations.c
deleted file mode 100644
index faac96215..000000000
--- a/keyboards/ergodox/infinity/animations.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#if defined(VISUALIZER_ENABLE)
-
-#include "animations.h"
-#include "visualizer.h"
-#ifdef LCD_ENABLE
-#include "lcd_keyframes.h"
-#endif
-#ifdef LCD_BACKLIGHT_ENABLE
-#include "lcd_backlight_keyframes.h"
-#endif
-
-#ifdef BACKLIGHT_ENABLE
-#include "led_backlight_keyframes.h"
-#endif
-
-#include "visualizer_keyframes.h"
-
-
-#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
-
-static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef LCD_ENABLE
-    lcd_keyframe_enable(animation, state);
-#endif
-#ifdef LCD_BACKLIGHT_ENABLE
-    lcd_backlight_keyframe_enable(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
-    led_backlight_keyframe_enable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef LCD_ENABLE
-    lcd_keyframe_disable(animation, state);
-#endif
-#ifdef LCD_BACKLIGHT_ENABLE
-    lcd_backlight_keyframe_disable(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
-    led_backlight_keyframe_disable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef LCD_BACKLIGHT_ENABLE
-    ret |= lcd_backlight_keyframe_animate_color(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_backlight_keyframe_fade_in_all(animation, state);
-#endif
-    return ret;
-}
-
-static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef LCD_BACKLIGHT_ENABLE
-    ret |= lcd_backlight_keyframe_animate_color(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_backlight_keyframe_fade_out_all(animation, state);
-#endif
-    return ret;
-}
-
-
-// Don't worry, if the startup animation is long, you can use the keyboard like normal
-// during that time
-keyframe_animation_t default_startup_animation = {
-    .num_frames = 3,
-    .loop = false,
-    .frame_lengths = {0, 0, gfxMillisecondsToTicks(5000)},
-    .frame_functions = {
-            keyframe_enable,
-            lcd_keyframe_draw_logo,
-            keyframe_fade_in,
-    },
-};
-
-keyframe_animation_t default_suspend_animation = {
-    .num_frames = 3,
-    .loop = false,
-    .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0},
-    .frame_functions = {
-            lcd_keyframe_display_layer_text,
-            keyframe_fade_out,
-            keyframe_disable,
-    },
-};
-#endif
-
-#if defined(BACKLIGHT_ENABLE)
-#define CROSSFADE_TIME 1000
-#define GRADIENT_TIME 3000
-
-keyframe_animation_t led_test_animation = {
-    .num_frames = 14,
-    .loop = true,
-    .frame_lengths = {
-        gfxMillisecondsToTicks(1000), // fade in
-        gfxMillisecondsToTicks(1000), // no op (leds on)
-        gfxMillisecondsToTicks(1000), // fade out
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // mirror leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // normal leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-
-    },
-    .frame_functions = {
-        led_backlight_keyframe_fade_in_all,
-        keyframe_no_operation,
-        led_backlight_keyframe_fade_out_all,
-        led_backlight_keyframe_crossfade,
-        led_backlight_keyframe_left_to_right_gradient,
-        led_backlight_keyframe_crossfade,
-        led_backlight_keyframe_top_to_bottom_gradient,
-        led_backlight_keyframe_mirror_orientation,
-        led_backlight_keyframe_crossfade,
-        led_backlight_keyframe_left_to_right_gradient,
-        led_backlight_keyframe_crossfade,
-        led_backlight_keyframe_top_to_bottom_gradient,
-        led_backlight_keyframe_normal_orientation,
-        led_backlight_keyframe_crossfade,
-    },
-};
-#endif
-
-#endif
diff --git a/keyboards/ergodox/infinity/animations.h b/keyboards/ergodox/infinity/animations.h
deleted file mode 100644
index 6d8b9830d..000000000
--- a/keyboards/ergodox/infinity/animations.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-
-#include "visualizer.h"
-
-// You can use these default animations, but of course you can also write your own custom ones instead
-extern keyframe_animation_t default_startup_animation;
-extern keyframe_animation_t default_suspend_animation;
-
-// An animation for testing and demonstrating the led support, should probably not be used for real world
-// cases
-extern keyframe_animation_t led_test_animation;
-
-#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
index 18171560d..2ccf98b8c 100644
--- a/keyboards/ergodox/infinity/rules.mk
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -1,7 +1,6 @@
 # project specific files
 SRC =	matrix.c \
-	led.c \
-	animations.c
+	led.c
 
 ## chip/board settings
 # - the next two should match the directories in
diff --git a/keyboards/ergodox/infinity/simple_visualizer.h b/keyboards/ergodox/infinity/simple_visualizer.h
index 88e96f2af..73d0e0887 100644
--- a/keyboards/ergodox/infinity/simple_visualizer.h
+++ b/keyboards/ergodox/infinity/simple_visualizer.h
@@ -34,7 +34,7 @@
 #include "lcd_backlight_keyframes.h"
 #include "system/serial_link.h"
 #include "led.h"
-#include "animations.h"
+#include "default_animations.h"
 
 static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
 static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
diff --git a/keyboards/ergodox/infinity/visualizer.c b/keyboards/ergodox/infinity/visualizer.c
index 047a1119c..4b16021ab 100644
--- a/keyboards/ergodox/infinity/visualizer.c
+++ b/keyboards/ergodox/infinity/visualizer.c
@@ -31,7 +31,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "lcd_keyframes.h"
 #include "lcd_backlight_keyframes.h"
 #include "system/serial_link.h"
-#include "animations.h"
+#include "default_animations.h"
 
 static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
 static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
diff --git a/keyboards/whitefox/animations.c b/keyboards/whitefox/animations.c
deleted file mode 100644
index a15d46ccd..000000000
--- a/keyboards/whitefox/animations.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#if defined(VISUALIZER_ENABLE)
-
-#include "animations.h"
-#include "visualizer.h"
-
-#ifdef BACKLIGHT_ENABLE
-#include "led_backlight_keyframes.h"
-#endif
-
-#include "visualizer_keyframes.h"
-
-
-#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
-
-static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef BACKLIGHT_ENABLE
-    led_backlight_keyframe_enable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef BACKLIGHT_ENABLE
-    led_backlight_keyframe_disable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_backlight_keyframe_fade_in_all(animation, state);
-#endif
-    return ret;
-}
-
-static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_backlight_keyframe_fade_out_all(animation, state);
-#endif
-    return ret;
-}
-
-
-// Don't worry, if the startup animation is long, you can use the keyboard like normal
-// during that time
-keyframe_animation_t default_startup_animation = {
-    .num_frames = 2,
-    .loop = false,
-    .frame_lengths = {0, gfxMillisecondsToTicks(5000)},
-    .frame_functions = {
-            keyframe_enable,
-            keyframe_fade_in,
-    },
-};
-
-keyframe_animation_t default_suspend_animation = {
-    .num_frames = 2,
-    .loop = false,
-    .frame_lengths = {gfxMillisecondsToTicks(1000), 0},
-    .frame_functions = {
-            keyframe_fade_out,
-            keyframe_disable,
-    },
-};
-#endif
-
-#if defined(BACKLIGHT_ENABLE)
-#define CROSSFADE_TIME 1000
-#define GRADIENT_TIME 3000
-
-keyframe_animation_t led_test_animation = {
-    .num_frames = 14,
-    .loop = true,
-    .frame_lengths = {
-        gfxMillisecondsToTicks(1000), // fade in
-        gfxMillisecondsToTicks(1000), // no op (leds on)
-        gfxMillisecondsToTicks(1000), // fade out
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // mirror leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // normal leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-
-    },
-    .frame_functions = {
-        led_backlight_keyframe_fade_in_all,
-        keyframe_no_operation,
-        led_backlight_keyframe_fade_out_all,
-        led_backlight_keyframe_crossfade,
-        led_backlight_keyframe_left_to_right_gradient,
-        led_backlight_keyframe_crossfade,
-        led_backlight_keyframe_top_to_bottom_gradient,
-        led_backlight_keyframe_mirror_orientation,
-        led_backlight_keyframe_crossfade,
-        led_backlight_keyframe_left_to_right_gradient,
-        led_backlight_keyframe_crossfade,
-        led_backlight_keyframe_top_to_bottom_gradient,
-        led_backlight_keyframe_normal_orientation,
-        led_backlight_keyframe_crossfade,
-    },
-};
-#endif
-
-#endif
diff --git a/keyboards/whitefox/animations.h b/keyboards/whitefox/animations.h
deleted file mode 100644
index 6d8b9830d..000000000
--- a/keyboards/whitefox/animations.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-
-#include "visualizer.h"
-
-// You can use these default animations, but of course you can also write your own custom ones instead
-extern keyframe_animation_t default_startup_animation;
-extern keyframe_animation_t default_suspend_animation;
-
-// An animation for testing and demonstrating the led support, should probably not be used for real world
-// cases
-extern keyframe_animation_t led_test_animation;
-
-#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */
diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk
index c0effcb7b..391148071 100644
--- a/keyboards/whitefox/rules.mk
+++ b/keyboards/whitefox/rules.mk
@@ -1,7 +1,6 @@
 # project specific files
 SRC =	matrix.c \
-	led.c \
-	animations.c
+	led.c
 
 ## chip/board settings
 # - the next two should match the directories in
diff --git a/keyboards/whitefox/visualizer.c b/keyboards/whitefox/visualizer.c
index 167e0ec4d..e5bafcbe9 100644
--- a/keyboards/whitefox/visualizer.c
+++ b/keyboards/whitefox/visualizer.c
@@ -20,7 +20,7 @@
 #include "visualizer.h"
 #include "visualizer_keyframes.h"
 #include "led.h"
-#include "animations.h"
+#include "default_animations.h"
 
 
 static bool initial_update = true;
diff --git a/quantum/visualizer/default_animations.c b/quantum/visualizer/default_animations.c
new file mode 100644
index 000000000..2d0327372
--- /dev/null
+++ b/quantum/visualizer/default_animations.c
@@ -0,0 +1,176 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(VISUALIZER_ENABLE)
+
+#include "default_animations.h"
+#include "visualizer.h"
+#ifdef LCD_ENABLE
+#include "lcd_keyframes.h"
+#endif
+#ifdef LCD_BACKLIGHT_ENABLE
+#include "lcd_backlight_keyframes.h"
+#endif
+
+#ifdef BACKLIGHT_ENABLE
+#include "led_backlight_keyframes.h"
+#endif
+
+#include "visualizer_keyframes.h"
+
+
+#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
+
+static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
+#ifdef LCD_ENABLE
+    lcd_keyframe_enable(animation, state);
+#endif
+#ifdef LCD_BACKLIGHT_ENABLE
+    lcd_backlight_keyframe_enable(animation, state);
+#endif
+#ifdef BACKLIGHT_ENABLE
+    led_backlight_keyframe_enable(animation, state);
+#endif
+    return false;
+}
+
+static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
+#ifdef LCD_ENABLE
+    lcd_keyframe_disable(animation, state);
+#endif
+#ifdef LCD_BACKLIGHT_ENABLE
+    lcd_backlight_keyframe_disable(animation, state);
+#endif
+#ifdef BACKLIGHT_ENABLE
+    led_backlight_keyframe_disable(animation, state);
+#endif
+    return false;
+}
+
+static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
+    bool ret = false;
+#ifdef LCD_BACKLIGHT_ENABLE
+    ret |= lcd_backlight_keyframe_animate_color(animation, state);
+#endif
+#ifdef BACKLIGHT_ENABLE
+    ret |= led_backlight_keyframe_fade_in_all(animation, state);
+#endif
+    return ret;
+}
+
+static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
+    bool ret = false;
+#ifdef LCD_BACKLIGHT_ENABLE
+    ret |= lcd_backlight_keyframe_animate_color(animation, state);
+#endif
+#ifdef BACKLIGHT_ENABLE
+    ret |= led_backlight_keyframe_fade_out_all(animation, state);
+#endif
+    return ret;
+}
+
+
+// Don't worry, if the startup animation is long, you can use the keyboard like normal
+// during that time
+keyframe_animation_t default_startup_animation = {
+#if LCD_ENABLE
+    .num_frames = 3,
+#else
+    .num_frames = 2,
+#endif
+    .loop = false,
+    .frame_lengths = {
+        0, 
+#if LCD_ENABLE
+        0, 
+#endif
+        gfxMillisecondsToTicks(5000)},
+    .frame_functions = {
+            keyframe_enable,
+#if LCD_ENABLE
+            lcd_keyframe_draw_logo,
+#endif
+            keyframe_fade_in,
+    },
+};
+
+keyframe_animation_t default_suspend_animation = {
+#if LCD_ENABLE
+    .num_frames = 3,
+#else
+    .num_frames = 2,
+#endif
+    .loop = false,
+    .frame_lengths = {
+#if LCD_ENABLE
+        0, 
+#endif
+        gfxMillisecondsToTicks(1000), 
+        0},
+    .frame_functions = {
+#if LCD_ENABLE
+            lcd_keyframe_display_layer_text,
+#endif
+            keyframe_fade_out,
+            keyframe_disable,
+    },
+};
+#endif
+
+#if defined(BACKLIGHT_ENABLE)
+#define CROSSFADE_TIME 1000
+#define GRADIENT_TIME 3000
+
+keyframe_animation_t led_test_animation = {
+    .num_frames = 14,
+    .loop = true,
+    .frame_lengths = {
+        gfxMillisecondsToTicks(1000), // fade in
+        gfxMillisecondsToTicks(1000), // no op (leds on)
+        gfxMillisecondsToTicks(1000), // fade out
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+        gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
+        0,           // mirror leds
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+        gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
+        0,           // normal leds
+        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+
+    },
+    .frame_functions = {
+        led_backlight_keyframe_fade_in_all,
+        keyframe_no_operation,
+        led_backlight_keyframe_fade_out_all,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_left_to_right_gradient,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_top_to_bottom_gradient,
+        led_backlight_keyframe_mirror_orientation,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_left_to_right_gradient,
+        led_backlight_keyframe_crossfade,
+        led_backlight_keyframe_top_to_bottom_gradient,
+        led_backlight_keyframe_normal_orientation,
+        led_backlight_keyframe_crossfade,
+    },
+};
+#endif
+
+#endif
diff --git a/quantum/visualizer/default_animations.h b/quantum/visualizer/default_animations.h
new file mode 100644
index 000000000..51320b8b8
--- /dev/null
+++ b/quantum/visualizer/default_animations.h
@@ -0,0 +1,30 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DEFAULT_ANIMATIONS_H_
+#define DEFAULT_ANIMATIONS_H_
+
+#include "visualizer.h"
+
+// You can use these default animations, but of course you can also write your own custom ones instead
+extern keyframe_animation_t default_startup_animation;
+extern keyframe_animation_t default_suspend_animation;
+
+// An animation for testing and demonstrating the led support, should probably not be used for real world
+// cases
+extern keyframe_animation_t led_test_animation;
+
+#endif /* DEFAULT_ANIMATIONS_H_ */
diff --git a/quantum/visualizer/visualizer.mk b/quantum/visualizer/visualizer.mk
index a04c9775f..3a0f771bc 100644
--- a/quantum/visualizer/visualizer.mk
+++ b/quantum/visualizer/visualizer.mk
@@ -46,6 +46,8 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
 SRC += $(VISUALIZER_DIR)/led_backlight_keyframes.c
 endif
 
+SRC += $(VISUALIZER_DIR)/default_animations.c
+
 include $(GFXLIB)/gfx.mk
 # For the common_gfxconf.h
 GFXINC += quantum/visualizer
-- 
cgit v1.2.3-70-g09d2


From 9d8279960d8784d5602025f6845b0af92db12848 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Sun, 9 Jul 2017 20:35:33 +0300
Subject: Make it easier to use drivers

---
 drivers/ugfx/gdisp/is31fl3731c/driver.mk           |  1 +
 drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c | 12 +++-----
 drivers/ugfx/gdisp/st7565/driver.mk                |  1 +
 drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c       |  4 +--
 keyboards/ergodox/infinity/board_IS31FL3731C.h     |  3 --
 keyboards/ergodox/infinity/config.h                |  5 ----
 keyboards/ergodox/infinity/gfxconf.h               |  6 ----
 keyboards/ergodox/infinity/rules.mk                |  9 ++++--
 keyboards/whitefox/board_IS31FL3731C.h             |  3 --
 keyboards/whitefox/config.h                        |  8 +----
 keyboards/whitefox/gfxconf.h                       |  4 ---
 keyboards/whitefox/rules.mk                        |  4 ++-
 quantum/visualizer/lcd_keyframes.c                 |  4 +--
 quantum/visualizer/led_backlight_keyframes.c       |  4 +--
 quantum/visualizer/visualizer.mk                   | 35 ++++++++++++++++++++++
 15 files changed, 58 insertions(+), 45 deletions(-)

(limited to 'keyboards')

diff --git a/drivers/ugfx/gdisp/is31fl3731c/driver.mk b/drivers/ugfx/gdisp/is31fl3731c/driver.mk
index c9de62d1e..4364787c9 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/driver.mk
+++ b/drivers/ugfx/gdisp/is31fl3731c/driver.mk
@@ -1,2 +1,3 @@
 GFXINC += drivers/ugfx/gdisp/is31fl3731c
 GFXSRC += drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
+GDISP_DRIVER_LIST += GDISPVMT_IS31FL3731C_QMK
\ No newline at end of file
diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
index 0691dbfbf..3faddcda8 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
@@ -19,7 +19,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT            GDISPVMT_IS31FL3731C_QMK
+#define GDISP_DRIVER_VMT          GDISPVMT_IS31FL3731C_QMK
+#define GDISP_SCREEN_HEIGHT       LED_HEIGHT
+#define GDISP_SCREEN_WIDTH        LED_WIDTH
+
 #include "gdisp_lld_config.h"
 #include "src/gdisp/gdisp_driver.h"
 
@@ -33,12 +36,6 @@ extern const uint8_t CIE1931_CURVE[];
 /* Driver local definitions.                                                 */
 /*===========================================================================*/
 
-#ifndef GDISP_SCREEN_HEIGHT
-    #define GDISP_SCREEN_HEIGHT       9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-    #define GDISP_SCREEN_WIDTH        16
-#endif
 #ifndef GDISP_INITIAL_CONTRAST
     #define GDISP_INITIAL_CONTRAST    0
 #endif
@@ -100,7 +97,6 @@ extern const uint8_t CIE1931_CURVE[];
 #define IS31_PWM_SIZE 0x90
 
 #define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
 
 #define IS31
 
diff --git a/drivers/ugfx/gdisp/st7565/driver.mk b/drivers/ugfx/gdisp/st7565/driver.mk
index 0190b6019..31fc8f1c7 100644
--- a/drivers/ugfx/gdisp/st7565/driver.mk
+++ b/drivers/ugfx/gdisp/st7565/driver.mk
@@ -1,2 +1,3 @@
 GFXINC += drivers/ugfx/gdisp/st7565
 GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK
\ No newline at end of file
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
index 55552cb79..4a4c83e89 100644
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
@@ -20,10 +20,10 @@
 /*===========================================================================*/
 
 #ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT         32
+#define GDISP_SCREEN_HEIGHT         LCD_HEIGHT
 #endif
 #ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH          128
+#define GDISP_SCREEN_WIDTH          LCD_WIDTH
 #endif
 #ifndef GDISP_INITIAL_CONTRAST
 #define GDISP_INITIAL_CONTRAST      35
diff --git a/keyboards/ergodox/infinity/board_IS31FL3731C.h b/keyboards/ergodox/infinity/board_IS31FL3731C.h
index 2ea73f1fb..f248cc25b 100644
--- a/keyboards/ergodox/infinity/board_IS31FL3731C.h
+++ b/keyboards/ergodox/infinity/board_IS31FL3731C.h
@@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = {
   400000 // clock speed (Hz); 400kHz max for IS31
 };
 
-#define GDISP_SCREEN_WIDTH  7
-#define GDISP_SCREEN_HEIGHT 7
-
 static const uint8_t led_mask[] = {
 	0xFF, 0x00, /* C1-1 -> C1-16 */
 	0xFF, 0x00, /* C2-1 -> C2-16 */
diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h
index fa157a893..c46edeb7b 100644
--- a/keyboards/ergodox/infinity/config.h
+++ b/keyboards/ergodox/infinity/config.h
@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define VISUALIZER_USER_DATA_SIZE 16
 
-#define LCD_DISPLAY_NUMBER 0
-#define LED_DISPLAY_NUMBER 1
-
-#define LED_NUM_ROWS 7
-#define LED_NUM_COLS 7
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h
index 0d017aea9..ca338399d 100644
--- a/keyboards/ergodox/infinity/gfxconf.h
+++ b/keyboards/ergodox/infinity/gfxconf.h
@@ -22,12 +22,6 @@
 #ifndef _GFXCONF_H
 #define _GFXCONF_H
 
-#ifndef EMULATOR
-#define GDISP_DRIVER_LIST                            GDISPVMT_ST7565_QMK, GDISPVMT_IS31FL3731C_QMK
-#else
-#define GDISP_DRIVER_LIST                            GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX
-#endif
-
 #include "common_gfxconf.h"
 
 #endif /* _GFXCONF_H */
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
index 2ccf98b8c..a341bbfce 100644
--- a/keyboards/ergodox/infinity/rules.mk
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -66,5 +66,10 @@ LCD_BACKLIGHT_ENABLE = yes
 MIDI_ENABLE = no
 RGBLIGHT_ENABLE = no
 
-include $(TOP_DIR)/drivers/ugfx/gdisp/st7565/driver.mk
-include $(TOP_DIR)/drivers/ugfx/gdisp/is31fl3731c/driver.mk
\ No newline at end of file
+LCD_DRIVER = st7565
+LCD_WIDTH = 128 
+LCD_HEIGHT = 32
+
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 7 
+LED_HEIGHT = 7
\ No newline at end of file
diff --git a/keyboards/whitefox/board_IS31FL3731C.h b/keyboards/whitefox/board_IS31FL3731C.h
index 3dc5327a5..dea643f10 100644
--- a/keyboards/whitefox/board_IS31FL3731C.h
+++ b/keyboards/whitefox/board_IS31FL3731C.h
@@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = {
   400000 // clock speed (Hz); 400kHz max for IS31
 };
 
-#define GDISP_SCREEN_WIDTH  16
-#define GDISP_SCREEN_HEIGHT 5
-
 static const uint8_t led_mask[] = {
 	0xFF, 0x00, /* C1-1 -> C1-16 */
 	0xFF, 0x00, /* C2-1 -> C2-16 */
diff --git a/keyboards/whitefox/config.h b/keyboards/whitefox/config.h
index 76040bd74..dc33a7ce5 100644
--- a/keyboards/whitefox/config.h
+++ b/keyboards/whitefox/config.h
@@ -81,10 +81,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#endif
-
-// The visualizer needs gfx thread priorities
-#define LED_DISPLAY_NUMBER 0
-
-#define LED_NUM_ROWS 5
-#define LED_NUM_COLS 16
\ No newline at end of file
+#endif
\ No newline at end of file
diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h
index eb93f92eb..ca338399d 100644
--- a/keyboards/whitefox/gfxconf.h
+++ b/keyboards/whitefox/gfxconf.h
@@ -22,10 +22,6 @@
 #ifndef _GFXCONF_H
 #define _GFXCONF_H
 
-#ifndef EMULATOR
-#define GDISP_DRIVER_LIST                            GDISPVMT_IS31FL3731C_QMK
-#endif
-
 #include "common_gfxconf.h"
 
 #endif /* _GFXCONF_H */
diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk
index 391148071..32273e08a 100644
--- a/keyboards/whitefox/rules.mk
+++ b/keyboards/whitefox/rules.mk
@@ -69,4 +69,6 @@ CUSTOM_MATRIX = yes # Custom matrix file
 BACKLIGHT_ENABLE = yes
 VISUALIZER_ENABLE = yes
 
-include $(TOP_DIR)/drivers/ugfx/gdisp/is31fl3731c/driver.mk
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 16 
+LED_HEIGHT = 5
\ No newline at end of file
diff --git a/quantum/visualizer/lcd_keyframes.c b/quantum/visualizer/lcd_keyframes.c
index 82e4184d2..75eb45700 100644
--- a/quantum/visualizer/lcd_keyframes.c
+++ b/quantum/visualizer/lcd_keyframes.c
@@ -166,8 +166,8 @@ bool lcd_keyframe_draw_logo(keyframe_animation_t* animation, visualizer_state_t*
     // or state structs, here we use the image
 
     //gdispGBlitArea is a tricky function to use since it supports blitting part of the image
-    // if you have full screen image, then just use 128 and 32 for both source and target dimensions
-    gdispGBlitArea(GDISP, 0, 0, 128, 32, 0, 0, 128, (pixel_t*)resource_lcd_logo);
+    // if you have full screen image, then just use LCD_WIDTH and LCD_HEIGHT for both source and target dimensions
+    gdispGBlitArea(GDISP, 0, 0, LCD_WIDTH, LCD_HEIGHT, 0, 0, LCD_WIDTH, (pixel_t*)resource_lcd_logo);
 
     return false;
 }
diff --git a/quantum/visualizer/led_backlight_keyframes.c b/quantum/visualizer/led_backlight_keyframes.c
index d2921a391..eb3f5561d 100644
--- a/quantum/visualizer/led_backlight_keyframes.c
+++ b/quantum/visualizer/led_backlight_keyframes.c
@@ -41,8 +41,8 @@ static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint
 }
 
 // TODO: Should be customizable per keyboard
-#define NUM_ROWS LED_NUM_ROWS
-#define NUM_COLS LED_NUM_COLS
+#define NUM_ROWS LED_HEIGHT
+#define NUM_COLS LED_WIDTH
 
 static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS];
 static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS];
diff --git a/quantum/visualizer/visualizer.mk b/quantum/visualizer/visualizer.mk
index 3a0f771bc..102d23b7e 100644
--- a/quantum/visualizer/visualizer.mk
+++ b/quantum/visualizer/visualizer.mk
@@ -20,6 +20,30 @@
 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 # SOFTWARE.
 
+define ADD_DRIVER
+    $(1)_DRIVER:=$(strip $($(1)_DRIVER))
+    $(1)_WIDTH:=$(strip $($(1)_WIDTH))
+    $(1)_HEIGHT:=$(strip $($(1)_HEIGHT))
+    ifeq ($($(1)_DRIVER),)
+        $$(error $(1)_DRIVER is not defined)
+    endif
+    ifeq ($($(1)_WIDTH),)
+        $$(error $(1)_WIDTH is not defined)
+    endif
+    ifeq ($($(1)_HEIGHT),)
+        $$(error $(1)_HEIGHT is not defined)
+    endif
+    OPT_DEFS+=-D$(1)_WIDTH=$($(1)_WIDTH)
+    OPT_DEFS+=-D$(1)_HEIGHT=$($(1)_HEIGHT)
+    GFXDEFS+=-D$(1)_WIDTH=$($(1)_WIDTH)
+    GFXDEFS+=-D$(1)_HEIGHT=$($(1)_HEIGHT)
+    $(1)_DISPLAY_NUMBER:=$$(words $$(GDISP_DRIVER_LIST))
+    OPT_DEFS+=-D$(1)_DISPLAY_NUMBER=$$($(1)_DISPLAY_NUMBER)
+    include $(TOP_DIR)/drivers/ugfx/gdisp/$($(1)_DRIVER)/driver.mk
+endef
+
+GDISP_DRIVER_LIST:=
+
 SRC += $(VISUALIZER_DIR)/visualizer.c \
 	$(VISUALIZER_DIR)/visualizer_keyframes.c
 EXTRAINCDIRS += $(GFXINC) $(VISUALIZER_DIR)
@@ -40,10 +64,12 @@ SRC += $(VISUALIZER_DIR)/lcd_backlight_keyframes.c
 # Note, that the linker will strip out any resources that are not actually in use
 SRC += $(VISUALIZER_DIR)/resources/lcd_logo.c
 OPT_DEFS += -DLCD_BACKLIGHT_ENABLE
+$(eval $(call ADD_DRIVER,LCD))
 endif
 
 ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
 SRC += $(VISUALIZER_DIR)/led_backlight_keyframes.c
+$(eval $(call ADD_DRIVER,LED))
 endif
 
 SRC += $(VISUALIZER_DIR)/default_animations.c
@@ -55,6 +81,15 @@ GFXINC += quantum/visualizer
 GFXSRC := $(patsubst $(TOP_DIR)/%,%,$(GFXSRC))
 GFXDEFS := $(patsubst %,-D%,$(patsubst -D%,%,$(GFXDEFS)))
 
+GDISP_LIST_COMMA=,
+GDISP_LIST_EMPTY=
+GDISP_LIST_SPACE=$(GDISP_LIST_EMPTY) $(GDISP_LIST_EMPTY)
+
+GDISP_DRIVER_LIST := $(strip $(GDISP_DRIVER_LIST))
+GDISP_DRIVER_LIST := $(subst $(GDISP_LIST_SPACE),$(GDISP_LIST_COMMA),$(GDISP_DRIVER_LIST))
+
+GFXDEFS +=-DGDISP_DRIVER_LIST="$(GDISP_DRIVER_LIST)"
+
 ifneq ("$(wildcard $(KEYMAP_PATH)/visualizer.c)","")
     SRC += keyboards/$(KEYBOARD)/keymaps/$(KEYMAP)/visualizer.c
 else 
-- 
cgit v1.2.3-70-g09d2


From 190b90892bf1b17f5cb24a1e7bd88c63047c3eb0 Mon Sep 17 00:00:00 2001
From: Fred Sundvik <fsundvik@gmail.com>
Date: Mon, 10 Jul 2017 10:48:02 +0300
Subject: Rename board files to lowercase

---
 drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c |   2 +-
 drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c       |   2 +-
 keyboards/ergodox/infinity/board_IS31FL3731C.h     | 110 --------------------
 keyboards/ergodox/infinity/board_ST7565.h          | 113 ---------------------
 keyboards/ergodox/infinity/board_is31fl3731c.h     | 110 ++++++++++++++++++++
 keyboards/ergodox/infinity/board_st7565.h          | 113 +++++++++++++++++++++
 keyboards/whitefox/board_IS31FL3731C.h             | 106 -------------------
 keyboards/whitefox/board_is31fl3731c.h             | 106 +++++++++++++++++++
 8 files changed, 331 insertions(+), 331 deletions(-)
 delete mode 100644 keyboards/ergodox/infinity/board_IS31FL3731C.h
 delete mode 100644 keyboards/ergodox/infinity/board_ST7565.h
 create mode 100644 keyboards/ergodox/infinity/board_is31fl3731c.h
 create mode 100644 keyboards/ergodox/infinity/board_st7565.h
 delete mode 100644 keyboards/whitefox/board_IS31FL3731C.h
 create mode 100644 keyboards/whitefox/board_is31fl3731c.h

(limited to 'keyboards')

diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
index 3faddcda8..917adadb8 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
@@ -26,7 +26,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "gdisp_lld_config.h"
 #include "src/gdisp/gdisp_driver.h"
 
-#include "board_IS31FL3731C.h"
+#include "board_is31fl3731c.h"
 
 
 // Can't include led_tables from here
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
index 4a4c83e89..c38194b06 100644
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
@@ -13,7 +13,7 @@
 #include "gdisp_lld_config.h"
 #include "src/gdisp/gdisp_driver.h"
 
-#include "board_ST7565.h"
+#include "board_st7565.h"
 
 /*===========================================================================*/
 /* Driver local definitions.                                                 */
diff --git a/keyboards/ergodox/infinity/board_IS31FL3731C.h b/keyboards/ergodox/infinity/board_IS31FL3731C.h
deleted file mode 100644
index f248cc25b..000000000
--- a/keyboards/ergodox/infinity/board_IS31FL3731C.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-static const I2CConfig i2ccfg = {
-  400000 // clock speed (Hz); 400kHz max for IS31
-};
-
-static const uint8_t led_mask[] = {
-	0xFF, 0x00, /* C1-1 -> C1-16 */
-	0xFF, 0x00, /* C2-1 -> C2-16 */
-	0xFF, 0x00, /* C3-1 -> C3-16 */
-	0xFF, 0x00, /* C4-1 -> C4-16 */
-	0x3F, 0x00, /* C5-1 -> C5-16 */
-	0x00, 0x00, /* C6-1 -> C6-16 */
-	0x00, 0x00, /* C7-1 -> C7-16 */
-	0x00, 0x00, /* C8-1 -> C8-16 */
-	0x00, 0x00, /* C9-1 -> C9-16 */
-};
-
-// The address of the LED
-#define LA(c, r) (c + r * 16 )
-// Need to be an address that is not mapped, but inside the range of the controller matrix
-#define NA LA(8, 8)
-
-// The numbers in the comments are the led numbers DXX on the PCB
-// The mapping is taken from the schematic of left hand side
-static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-//   45        44        43        42        41        40        39
-   { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
-//   52        51        50        49        48        47        46
-   { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
-//   58        57        56        55        54        53        N/A
-   { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
-//   67        66        65        64        63        62        61
-   { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
-//   76        75        74        73        72        60        59
-   { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
-//   N/A       N/A       N/A       N/A       N/A       N/A       68
-   { NA,       NA,       NA,       NA,       NA,       NA,       LA(5, 4) },
-//   N/A       N/A       N/A       N/A       71        70        69
-   { NA,       NA,       NA,       NA,       LA(6, 2), LA(6, 1), LA(6, 0) },
-};
-
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
-#define IS31_TIMEOUT 5000
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
-    /* I2C pins */
-    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
-    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
-    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
-    palClearPad(GPIOB, 16);
-    /* start I2C */
-    i2cStart(&I2CD1, &i2ccfg);
-    // try high drive (from kiibohd)
-    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
-    // try glitch fixing (from kiibohd)
-    I2CD1.i2c->FLT = 4;
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
-    (void) g;
-    return led_mask;
-}
-
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
-    (void) g;
-    return led_mapping[y][x];
-}
-
-static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
-    (void) g;
-    if(!shutdown) {
-        palSetPad(GPIOB, 16);
-    }
-    else {
-        palClearPad(GPIOB, 16);
-    }
-}
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/board_ST7565.h b/keyboards/ergodox/infinity/board_ST7565.h
deleted file mode 100644
index 9ab636c95..000000000
--- a/keyboards/ergodox/infinity/board_ST7565.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER       0,1,2,3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
- */
-
-#define ST7565_GPIOPORT GPIOC
-#define ST7565_PORT PORTC
-#define ST7565_A0_PIN 7
-#define ST7565_RST_PIN 8
-#define ST7565_MOSI_PIN 6
-#define ST7565_SLCK_PIN 5
-#define ST7565_SS_PIN 4
-
-#define palSetPadModeRaw(portname, bits) \
-    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
-
-#define palSetPadModeNamed(portname, portmode) \
-    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
-
-#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
-   // Operation complete callback or @p NULL.
-  .end_cb = NULL,
-   //The chip select line port - when not using pcs.
-  .ssport = ST7565_GPIOPORT,
-   // brief The chip select line pad number - when not using pcs.
-  .sspad=ST7565_SS_PIN,
-   // SPI initialization data.
-  .tar0 =
-    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
-    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
-    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
-    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
-    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void) g;
-    // Only the LCD is using the SPI bus, so no need to acquire
-    // spiAcquireBus(&SPID1);
-    spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
-    (void) g;
-    // Only the LCD is using the SPI bus, so no need to release
-    //spiReleaseBus(&SPID1);
-    spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
-    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
-    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
-    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
-
-    spiInit();
-    spiStart(&SPID1, &spi1config);
-    release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
-    (void) g;
-}
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void) g;
-    if (state) {
-        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-    else {
-        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-}
-
-static GFXINLINE void enter_data_mode(GDisplay *g) {
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
-    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-    (void) g;
-    spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/board_is31fl3731c.h b/keyboards/ergodox/infinity/board_is31fl3731c.h
new file mode 100644
index 000000000..f248cc25b
--- /dev/null
+++ b/keyboards/ergodox/infinity/board_is31fl3731c.h
@@ -0,0 +1,110 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+  400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+static const uint8_t led_mask[] = {
+	0xFF, 0x00, /* C1-1 -> C1-16 */
+	0xFF, 0x00, /* C2-1 -> C2-16 */
+	0xFF, 0x00, /* C3-1 -> C3-16 */
+	0xFF, 0x00, /* C4-1 -> C4-16 */
+	0x3F, 0x00, /* C5-1 -> C5-16 */
+	0x00, 0x00, /* C6-1 -> C6-16 */
+	0x00, 0x00, /* C7-1 -> C7-16 */
+	0x00, 0x00, /* C8-1 -> C8-16 */
+	0x00, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+//   45        44        43        42        41        40        39
+   { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+//   52        51        50        49        48        47        46
+   { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
+//   58        57        56        55        54        53        N/A
+   { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
+//   67        66        65        64        63        62        61
+   { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
+//   76        75        74        73        72        60        59
+   { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
+//   N/A       N/A       N/A       N/A       N/A       N/A       68
+   { NA,       NA,       NA,       NA,       NA,       NA,       LA(5, 4) },
+//   N/A       N/A       N/A       N/A       71        70        69
+   { NA,       NA,       NA,       NA,       LA(6, 2), LA(6, 1), LA(6, 0) },
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    /* I2C pins */
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+    palClearPad(GPIOB, 16);
+    /* start I2C */
+    i2cStart(&I2CD1, &i2ccfg);
+    // try high drive (from kiibohd)
+    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+    // try glitch fixing (from kiibohd)
+    I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+    (void) g;
+    return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+    (void) g;
+    return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+    (void) g;
+    if(!shutdown) {
+        palSetPad(GPIOB, 16);
+    }
+    else {
+        palClearPad(GPIOB, 16);
+    }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/board_st7565.h b/keyboards/ergodox/infinity/board_st7565.h
new file mode 100644
index 000000000..9ab636c95
--- /dev/null
+++ b/keyboards/ergodox/infinity/board_st7565.h
@@ -0,0 +1,113 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
+#define ST7565_ADC              ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER       0,1,2,3
+/*
+ * Custom page order for several LCD boards, e.g. HEM12864-99
+ * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
+ */
+
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
+
+#define palSetPadModeRaw(portname, bits) \
+    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) \
+    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
+// DSPI Clock and Transfer Attributes
+// Frame Size: 8 bits
+// MSB First
+// CLK Low by default
+static const SPIConfig spi1config = {
+   // Operation complete callback or @p NULL.
+  .end_cb = NULL,
+   //The chip select line port - when not using pcs.
+  .ssport = ST7565_GPIOPORT,
+   // brief The chip select line pad number - when not using pcs.
+  .sspad=ST7565_SS_PIN,
+   // SPI initialization data.
+  .tar0 =
+    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
+    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
+    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
+    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
+    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
+};
+
+static GFXINLINE void acquire_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to acquire
+    // spiAcquireBus(&SPID1);
+    spiSelect(&SPID1);
+}
+
+static GFXINLINE void release_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to release
+    //spiReleaseBus(&SPID1);
+    spiUnselect(&SPID1);
+}
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
+
+    spiInit();
+    spiStart(&SPID1, &spi1config);
+    release_bus(g);
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+    (void) g;
+}
+
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
+    (void) g;
+    if (state) {
+        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+    else {
+        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+}
+
+static GFXINLINE void enter_data_mode(GDisplay *g) {
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+static GFXINLINE void enter_cmd_mode(GDisplay *g) {
+    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+    (void) g;
+    spiSend(&SPID1, length, data);
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/whitefox/board_IS31FL3731C.h b/keyboards/whitefox/board_IS31FL3731C.h
deleted file mode 100644
index dea643f10..000000000
--- a/keyboards/whitefox/board_IS31FL3731C.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-static const I2CConfig i2ccfg = {
-  400000 // clock speed (Hz); 400kHz max for IS31
-};
-
-static const uint8_t led_mask[] = {
-	0xFF, 0x00, /* C1-1 -> C1-16 */
-	0xFF, 0x00, /* C2-1 -> C2-16 */
-	0xFF, 0x00, /* C3-1 -> C3-16 */
-	0xFF, 0x00, /* C4-1 -> C4-16 */
-	0xFF, 0x00, /* C5-1 -> C5-16 */
-	0xFF, 0x00, /* C6-1 -> C6-16 */
-	0xFF, 0x00, /* C7-1 -> C7-16 */
-	0xFF, 0x00, /* C8-1 -> C8-16 */
-	0xFE, 0x00, /* C9-1 -> C9-16 */
-};
-
-// The address of the LED
-#define LA(c, r) (c + r * 16 )
-// Need to be an address that is not mapped, but inside the range of the controller matrix
-#define NA LA(8, 8)
-
-// The numbers in the comments are the led numbers DXX on the PCB
-// The mapping is taken from the schematic of left hand side
-static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-//   1         2         3         4         5         6         7         8         9         10        11        12        13        14        15        16
-   { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
-//   17        18        19        20        21        22        23        24        25        26                  27        28        29        30        31
-   { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA,       LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
-//   32        33        34        35        36        37        38        39        40        41                  42        43        44        45        46
-   { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA,       LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
-//   47        48        49        50        51        52        53        54        55        56                  57        58        59        60        61
-   { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA,       LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
-//   62        63        64                                      65                                      66        67        68        69        70        71
-   { LA(5, 7), LA(6, 7), LA(7, 7), NA,       NA,       NA,       LA(0, 8), NA,       NA,       NA,       LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
-};
-
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
-#define IS31_TIMEOUT 5000
-
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
-    /* I2C pins */
-    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
-    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
-    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
-    palClearPad(GPIOB, 16);
-    /* start I2C */
-    i2cStart(&I2CD1, &i2ccfg);
-    // try high drive (from kiibohd)
-    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
-    // try glitch fixing (from kiibohd)
-    I2CD1.i2c->FLT = 4;
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
-    (void) g;
-    return led_mask;
-}
-
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
-    (void) g;
-    return led_mapping[y][x];
-}
-
-static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
-    (void) g;
-    if(!shutdown) {
-        palSetPad(GPIOB, 16);
-    }
-    else {
-        palClearPad(GPIOB, 16);
-    }
-}
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/whitefox/board_is31fl3731c.h b/keyboards/whitefox/board_is31fl3731c.h
new file mode 100644
index 000000000..dea643f10
--- /dev/null
+++ b/keyboards/whitefox/board_is31fl3731c.h
@@ -0,0 +1,106 @@
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+  400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+static const uint8_t led_mask[] = {
+	0xFF, 0x00, /* C1-1 -> C1-16 */
+	0xFF, 0x00, /* C2-1 -> C2-16 */
+	0xFF, 0x00, /* C3-1 -> C3-16 */
+	0xFF, 0x00, /* C4-1 -> C4-16 */
+	0xFF, 0x00, /* C5-1 -> C5-16 */
+	0xFF, 0x00, /* C6-1 -> C6-16 */
+	0xFF, 0x00, /* C7-1 -> C7-16 */
+	0xFF, 0x00, /* C8-1 -> C8-16 */
+	0xFE, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+//   1         2         3         4         5         6         7         8         9         10        11        12        13        14        15        16
+   { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
+//   17        18        19        20        21        22        23        24        25        26                  27        28        29        30        31
+   { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA,       LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
+//   32        33        34        35        36        37        38        39        40        41                  42        43        44        45        46
+   { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA,       LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
+//   47        48        49        50        51        52        53        54        55        56                  57        58        59        60        61
+   { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA,       LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
+//   62        63        64                                      65                                      66        67        68        69        70        71
+   { LA(5, 7), LA(6, 7), LA(7, 7), NA,       NA,       NA,       LA(0, 8), NA,       NA,       NA,       LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    /* I2C pins */
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+    palClearPad(GPIOB, 16);
+    /* start I2C */
+    i2cStart(&I2CD1, &i2ccfg);
+    // try high drive (from kiibohd)
+    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+    // try glitch fixing (from kiibohd)
+    I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+    (void) g;
+    return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+    (void) g;
+    return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+    (void) g;
+    if(!shutdown) {
+        palSetPad(GPIOB, 16);
+    }
+    else {
+        palClearPad(GPIOB, 16);
+    }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
-- 
cgit v1.2.3-70-g09d2


From 42d5a324eb673b2214a87c8911d850105c3bdaab Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Mon, 10 Jul 2017 11:18:47 -0400
Subject: Start mvoing hardware drivers to /drivers/ (#1433)

* start driver isolation

* update nyquist and orthodox boards

* update atreus62

* move drivers to avr

* update avr conditional
---
 common.mk                               |   6 +-
 common_features.mk                      |   2 +-
 drivers/avr/analog.c                    |  69 +++++
 drivers/avr/analog.h                    |  52 ++++
 drivers/avr/glcdfont.c                  | 276 +++++++++++++++++++
 drivers/avr/pro_micro.h                 | 362 ++++++++++++++++++++++++
 drivers/avr/ssd1306.c                   | 470 ++++++++++++++++++++++++++++++++
 drivers/avr/ssd1306.h                   |  17 ++
 drivers/avr/ws2812.c                    | 342 +++++++++++++++++++++++
 drivers/avr/ws2812.h                    |  91 +++++++
 keyboards/atreus62/pro_micro.h          | 362 ------------------------
 keyboards/handwired/promethium/rgbsps.c |   2 +-
 keyboards/handwired/promethium/rules.mk |   4 +-
 keyboards/lets_split/common/glcdfont.c  | 276 -------------------
 keyboards/lets_split/pro_micro.h        | 362 ------------------------
 keyboards/lets_split/ssd1306.c          | 470 --------------------------------
 keyboards/lets_split/ssd1306.h          |  17 --
 keyboards/nyquist/pro_micro.h           | 362 ------------------------
 keyboards/orthodox/pro_micro.h          | 362 ------------------------
 keyboards/orthodox/ssd1306.c            | 470 --------------------------------
 keyboards/orthodox/ssd1306.h            |  17 --
 quantum/analog.c                        |  69 -----
 quantum/analog.h                        |  52 ----
 quantum/light_ws2812.c                  | 342 -----------------------
 quantum/light_ws2812.h                  |  91 -------
 quantum/rgblight.h                      |   2 +-
 tmk_core/avr.mk                         |   2 +-
 27 files changed, 1690 insertions(+), 3259 deletions(-)
 create mode 100644 drivers/avr/analog.c
 create mode 100644 drivers/avr/analog.h
 create mode 100644 drivers/avr/glcdfont.c
 create mode 100644 drivers/avr/pro_micro.h
 create mode 100644 drivers/avr/ssd1306.c
 create mode 100644 drivers/avr/ssd1306.h
 create mode 100644 drivers/avr/ws2812.c
 create mode 100644 drivers/avr/ws2812.h
 delete mode 100644 keyboards/atreus62/pro_micro.h
 delete mode 100644 keyboards/lets_split/common/glcdfont.c
 delete mode 100644 keyboards/lets_split/pro_micro.h
 delete mode 100644 keyboards/lets_split/ssd1306.c
 delete mode 100644 keyboards/lets_split/ssd1306.h
 delete mode 100644 keyboards/nyquist/pro_micro.h
 delete mode 100644 keyboards/orthodox/pro_micro.h
 delete mode 100644 keyboards/orthodox/ssd1306.c
 delete mode 100644 keyboards/orthodox/ssd1306.h
 delete mode 100644 quantum/analog.c
 delete mode 100644 quantum/analog.h
 delete mode 100755 quantum/light_ws2812.c
 delete mode 100755 quantum/light_ws2812.h

(limited to 'keyboards')

diff --git a/common.mk b/common.mk
index f87c20934..5b49680ea 100644
--- a/common.mk
+++ b/common.mk
@@ -9,6 +9,9 @@ LIB_PATH = $(TOP_DIR)/lib
 QUANTUM_DIR = quantum
 QUANTUM_PATH = $(TOP_DIR)/$(QUANTUM_DIR)
 
+DRIVER_DIR = drivers
+DRIVER_PATH = $(TOP_DIR)/$(DRIVER_DIR)
+
 BUILD_DIR := $(TOP_DIR)/.build
 
 COMMON_VPATH := $(TOP_DIR)
@@ -17,4 +20,5 @@ COMMON_VPATH += $(QUANTUM_PATH)
 COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
 COMMON_VPATH += $(QUANTUM_PATH)/audio
 COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
-COMMON_VPATH += $(QUANTUM_PATH)/api
\ No newline at end of file
+COMMON_VPATH += $(QUANTUM_PATH)/api
+COMMON_VPATH += $(DRIVER_PATH)
\ No newline at end of file
diff --git a/common_features.mk b/common_features.mk
index f5e7af01f..5eb56ccbf 100644
--- a/common_features.mk
+++ b/common_features.mk
@@ -87,7 +87,7 @@ endif
 
 ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     OPT_DEFS += -DRGBLIGHT_ENABLE
-    SRC += $(QUANTUM_DIR)/light_ws2812.c
+    SRC += ws2812.c
     SRC += $(QUANTUM_DIR)/rgblight.c
     CIE1931_CURVE = yes
     LED_BREATHING_TABLE = yes
diff --git a/drivers/avr/analog.c b/drivers/avr/analog.c
new file mode 100644
index 000000000..1ec38df75
--- /dev/null
+++ b/drivers/avr/analog.c
@@ -0,0 +1,69 @@
+/* Copyright 2015 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Simple analog to digitial conversion
+
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <stdint.h>
+#include "analog.h"
+
+
+static uint8_t aref = (1<<REFS0); // default to AREF = Vcc
+
+
+void analogReference(uint8_t mode)
+{
+	aref = mode & 0xC0;
+}
+
+
+// Arduino compatible pin input
+int16_t analogRead(uint8_t pin)
+{
+#if defined(__AVR_ATmega32U4__)
+	static const uint8_t PROGMEM pin_to_mux[] = {
+		0x00, 0x01, 0x04, 0x05, 0x06, 0x07,
+		0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
+	if (pin >= 12) return 0;
+	return adc_read(pgm_read_byte(pin_to_mux + pin));
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+	if (pin >= 8) return 0;
+	return adc_read(pin);
+#else
+	return 0;
+#endif
+}
+
+// Mux input
+int16_t adc_read(uint8_t mux)
+{
+#if defined(__AVR_AT90USB162__)
+	return 0;
+#else
+	uint8_t low;
+
+	ADCSRA = (1<<ADEN) | ADC_PRESCALER;		// enable ADC
+	ADCSRB = (1<<ADHSM) | (mux & 0x20);		// high speed mode
+	ADMUX = aref | (mux & 0x1F);			// configure mux input
+	ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC);	// start the conversion
+	while (ADCSRA & (1<<ADSC)) ;			// wait for result
+	low = ADCL;					// must read LSB first
+	return (ADCH << 8) | low;			// must read MSB only once!
+#endif
+}
+
+
diff --git a/drivers/avr/analog.h b/drivers/avr/analog.h
new file mode 100644
index 000000000..8d93de7dc
--- /dev/null
+++ b/drivers/avr/analog.h
@@ -0,0 +1,52 @@
+/* Copyright 2015 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _analog_h_included__
+#define _analog_h_included__
+
+#include <stdint.h>
+
+void analogReference(uint8_t mode);
+int16_t analogRead(uint8_t pin);
+int16_t adc_read(uint8_t mux);
+
+#define ADC_REF_POWER     (1<<REFS0)
+#define ADC_REF_INTERNAL  ((1<<REFS1) | (1<<REFS0))
+#define ADC_REF_EXTERNAL  (0)
+
+// These prescaler values are for high speed mode, ADHSM = 1
+#if F_CPU == 16000000L
+#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1))
+#elif F_CPU == 8000000L
+#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0))
+#elif F_CPU == 4000000L
+#define ADC_PRESCALER ((1<<ADPS2))
+#elif F_CPU == 2000000L
+#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0))
+#elif F_CPU == 1000000L
+#define ADC_PRESCALER ((1<<ADPS1))
+#else
+#define ADC_PRESCALER ((1<<ADPS0))
+#endif
+
+// some avr-libc versions do not properly define ADHSM
+#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+#if !defined(ADHSM)
+#define ADHSM (7)
+#endif
+#endif
+
+#endif
diff --git a/drivers/avr/glcdfont.c b/drivers/avr/glcdfont.c
new file mode 100644
index 000000000..6f88bd23a
--- /dev/null
+++ b/drivers/avr/glcdfont.c
@@ -0,0 +1,276 @@
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Standard ASCII 5x7 font
+
+static const unsigned char font[] PROGMEM = {
+	0x00, 0x00, 0x00, 0x00, 0x00,
+	0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
+	0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
+	0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
+	0x18, 0x3C, 0x7E, 0x3C, 0x18,
+	0x1C, 0x57, 0x7D, 0x57, 0x1C,
+	0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
+	0x00, 0x18, 0x3C, 0x18, 0x00,
+	0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
+	0x00, 0x18, 0x24, 0x18, 0x00,
+	0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
+	0x30, 0x48, 0x3A, 0x06, 0x0E,
+	0x26, 0x29, 0x79, 0x29, 0x26,
+	0x40, 0x7F, 0x05, 0x05, 0x07,
+	0x40, 0x7F, 0x05, 0x25, 0x3F,
+	0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
+	0x7F, 0x3E, 0x1C, 0x1C, 0x08,
+	0x08, 0x1C, 0x1C, 0x3E, 0x7F,
+	0x14, 0x22, 0x7F, 0x22, 0x14,
+	0x5F, 0x5F, 0x00, 0x5F, 0x5F,
+	0x06, 0x09, 0x7F, 0x01, 0x7F,
+	0x00, 0x66, 0x89, 0x95, 0x6A,
+	0x60, 0x60, 0x60, 0x60, 0x60,
+	0x94, 0xA2, 0xFF, 0xA2, 0x94,
+	0x08, 0x04, 0x7E, 0x04, 0x08,
+	0x10, 0x20, 0x7E, 0x20, 0x10,
+	0x08, 0x08, 0x2A, 0x1C, 0x08,
+	0x08, 0x1C, 0x2A, 0x08, 0x08,
+	0x1E, 0x10, 0x10, 0x10, 0x10,
+	0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
+	0x30, 0x38, 0x3E, 0x38, 0x30,
+	0x06, 0x0E, 0x3E, 0x0E, 0x06,
+	0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x5F, 0x00, 0x00,
+	0x00, 0x07, 0x00, 0x07, 0x00,
+	0x14, 0x7F, 0x14, 0x7F, 0x14,
+	0x24, 0x2A, 0x7F, 0x2A, 0x12,
+	0x23, 0x13, 0x08, 0x64, 0x62,
+	0x36, 0x49, 0x56, 0x20, 0x50,
+	0x00, 0x08, 0x07, 0x03, 0x00,
+	0x00, 0x1C, 0x22, 0x41, 0x00,
+	0x00, 0x41, 0x22, 0x1C, 0x00,
+	0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
+	0x08, 0x08, 0x3E, 0x08, 0x08,
+	0x00, 0x80, 0x70, 0x30, 0x00,
+	0x08, 0x08, 0x08, 0x08, 0x08,
+	0x00, 0x00, 0x60, 0x60, 0x00,
+	0x20, 0x10, 0x08, 0x04, 0x02,
+	0x3E, 0x51, 0x49, 0x45, 0x3E,
+	0x00, 0x42, 0x7F, 0x40, 0x00,
+	0x72, 0x49, 0x49, 0x49, 0x46,
+	0x21, 0x41, 0x49, 0x4D, 0x33,
+	0x18, 0x14, 0x12, 0x7F, 0x10,
+	0x27, 0x45, 0x45, 0x45, 0x39,
+	0x3C, 0x4A, 0x49, 0x49, 0x31,
+	0x41, 0x21, 0x11, 0x09, 0x07,
+	0x36, 0x49, 0x49, 0x49, 0x36,
+	0x46, 0x49, 0x49, 0x29, 0x1E,
+	0x00, 0x00, 0x14, 0x00, 0x00,
+	0x00, 0x40, 0x34, 0x00, 0x00,
+	0x00, 0x08, 0x14, 0x22, 0x41,
+	0x14, 0x14, 0x14, 0x14, 0x14,
+	0x00, 0x41, 0x22, 0x14, 0x08,
+	0x02, 0x01, 0x59, 0x09, 0x06,
+	0x3E, 0x41, 0x5D, 0x59, 0x4E,
+	0x7C, 0x12, 0x11, 0x12, 0x7C,
+	0x7F, 0x49, 0x49, 0x49, 0x36,
+	0x3E, 0x41, 0x41, 0x41, 0x22,
+	0x7F, 0x41, 0x41, 0x41, 0x3E,
+	0x7F, 0x49, 0x49, 0x49, 0x41,
+	0x7F, 0x09, 0x09, 0x09, 0x01,
+	0x3E, 0x41, 0x41, 0x51, 0x73,
+	0x7F, 0x08, 0x08, 0x08, 0x7F,
+	0x00, 0x41, 0x7F, 0x41, 0x00,
+	0x20, 0x40, 0x41, 0x3F, 0x01,
+	0x7F, 0x08, 0x14, 0x22, 0x41,
+	0x7F, 0x40, 0x40, 0x40, 0x40,
+	0x7F, 0x02, 0x1C, 0x02, 0x7F,
+	0x7F, 0x04, 0x08, 0x10, 0x7F,
+	0x3E, 0x41, 0x41, 0x41, 0x3E,
+	0x7F, 0x09, 0x09, 0x09, 0x06,
+	0x3E, 0x41, 0x51, 0x21, 0x5E,
+	0x7F, 0x09, 0x19, 0x29, 0x46,
+	0x26, 0x49, 0x49, 0x49, 0x32,
+	0x03, 0x01, 0x7F, 0x01, 0x03,
+	0x3F, 0x40, 0x40, 0x40, 0x3F,
+	0x1F, 0x20, 0x40, 0x20, 0x1F,
+	0x3F, 0x40, 0x38, 0x40, 0x3F,
+	0x63, 0x14, 0x08, 0x14, 0x63,
+	0x03, 0x04, 0x78, 0x04, 0x03,
+	0x61, 0x59, 0x49, 0x4D, 0x43,
+	0x00, 0x7F, 0x41, 0x41, 0x41,
+	0x02, 0x04, 0x08, 0x10, 0x20,
+	0x00, 0x41, 0x41, 0x41, 0x7F,
+	0x04, 0x02, 0x01, 0x02, 0x04,
+	0x40, 0x40, 0x40, 0x40, 0x40,
+	0x00, 0x03, 0x07, 0x08, 0x00,
+	0x20, 0x54, 0x54, 0x78, 0x40,
+	0x7F, 0x28, 0x44, 0x44, 0x38,
+	0x38, 0x44, 0x44, 0x44, 0x28,
+	0x38, 0x44, 0x44, 0x28, 0x7F,
+	0x38, 0x54, 0x54, 0x54, 0x18,
+	0x00, 0x08, 0x7E, 0x09, 0x02,
+	0x18, 0xA4, 0xA4, 0x9C, 0x78,
+	0x7F, 0x08, 0x04, 0x04, 0x78,
+	0x00, 0x44, 0x7D, 0x40, 0x00,
+	0x20, 0x40, 0x40, 0x3D, 0x00,
+	0x7F, 0x10, 0x28, 0x44, 0x00,
+	0x00, 0x41, 0x7F, 0x40, 0x00,
+	0x7C, 0x04, 0x78, 0x04, 0x78,
+	0x7C, 0x08, 0x04, 0x04, 0x78,
+	0x38, 0x44, 0x44, 0x44, 0x38,
+	0xFC, 0x18, 0x24, 0x24, 0x18,
+	0x18, 0x24, 0x24, 0x18, 0xFC,
+	0x7C, 0x08, 0x04, 0x04, 0x08,
+	0x48, 0x54, 0x54, 0x54, 0x24,
+	0x04, 0x04, 0x3F, 0x44, 0x24,
+	0x3C, 0x40, 0x40, 0x20, 0x7C,
+	0x1C, 0x20, 0x40, 0x20, 0x1C,
+	0x3C, 0x40, 0x30, 0x40, 0x3C,
+	0x44, 0x28, 0x10, 0x28, 0x44,
+	0x4C, 0x90, 0x90, 0x90, 0x7C,
+	0x44, 0x64, 0x54, 0x4C, 0x44,
+	0x00, 0x08, 0x36, 0x41, 0x00,
+	0x00, 0x00, 0x77, 0x00, 0x00,
+	0x00, 0x41, 0x36, 0x08, 0x00,
+	0x02, 0x01, 0x02, 0x04, 0x02,
+	0x3C, 0x26, 0x23, 0x26, 0x3C,
+	0x1E, 0xA1, 0xA1, 0x61, 0x12,
+	0x3A, 0x40, 0x40, 0x20, 0x7A,
+	0x38, 0x54, 0x54, 0x55, 0x59,
+	0x21, 0x55, 0x55, 0x79, 0x41,
+	0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut
+	0x21, 0x55, 0x54, 0x78, 0x40,
+	0x20, 0x54, 0x55, 0x79, 0x40,
+	0x0C, 0x1E, 0x52, 0x72, 0x12,
+	0x39, 0x55, 0x55, 0x55, 0x59,
+	0x39, 0x54, 0x54, 0x54, 0x59,
+	0x39, 0x55, 0x54, 0x54, 0x58,
+	0x00, 0x00, 0x45, 0x7C, 0x41,
+	0x00, 0x02, 0x45, 0x7D, 0x42,
+	0x00, 0x01, 0x45, 0x7C, 0x40,
+	0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut
+	0xF0, 0x28, 0x25, 0x28, 0xF0,
+	0x7C, 0x54, 0x55, 0x45, 0x00,
+	0x20, 0x54, 0x54, 0x7C, 0x54,
+	0x7C, 0x0A, 0x09, 0x7F, 0x49,
+	0x32, 0x49, 0x49, 0x49, 0x32,
+	0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut
+	0x32, 0x4A, 0x48, 0x48, 0x30,
+	0x3A, 0x41, 0x41, 0x21, 0x7A,
+	0x3A, 0x42, 0x40, 0x20, 0x78,
+	0x00, 0x9D, 0xA0, 0xA0, 0x7D,
+	0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut
+	0x3D, 0x40, 0x40, 0x40, 0x3D,
+	0x3C, 0x24, 0xFF, 0x24, 0x24,
+	0x48, 0x7E, 0x49, 0x43, 0x66,
+	0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
+	0xFF, 0x09, 0x29, 0xF6, 0x20,
+	0xC0, 0x88, 0x7E, 0x09, 0x03,
+	0x20, 0x54, 0x54, 0x79, 0x41,
+	0x00, 0x00, 0x44, 0x7D, 0x41,
+	0x30, 0x48, 0x48, 0x4A, 0x32,
+	0x38, 0x40, 0x40, 0x22, 0x7A,
+	0x00, 0x7A, 0x0A, 0x0A, 0x72,
+	0x7D, 0x0D, 0x19, 0x31, 0x7D,
+	0x26, 0x29, 0x29, 0x2F, 0x28,
+	0x26, 0x29, 0x29, 0x29, 0x26,
+	0x30, 0x48, 0x4D, 0x40, 0x20,
+	0x38, 0x08, 0x08, 0x08, 0x08,
+	0x08, 0x08, 0x08, 0x08, 0x38,
+	0x2F, 0x10, 0xC8, 0xAC, 0xBA,
+	0x2F, 0x10, 0x28, 0x34, 0xFA,
+	0x00, 0x00, 0x7B, 0x00, 0x00,
+	0x08, 0x14, 0x2A, 0x14, 0x22,
+	0x22, 0x14, 0x2A, 0x14, 0x08,
+	0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code
+	0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block
+	0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block
+	0x00, 0x00, 0x00, 0xFF, 0x00,
+	0x10, 0x10, 0x10, 0xFF, 0x00,
+	0x14, 0x14, 0x14, 0xFF, 0x00,
+	0x10, 0x10, 0xFF, 0x00, 0xFF,
+	0x10, 0x10, 0xF0, 0x10, 0xF0,
+	0x14, 0x14, 0x14, 0xFC, 0x00,
+	0x14, 0x14, 0xF7, 0x00, 0xFF,
+	0x00, 0x00, 0xFF, 0x00, 0xFF,
+	0x14, 0x14, 0xF4, 0x04, 0xFC,
+	0x14, 0x14, 0x17, 0x10, 0x1F,
+	0x10, 0x10, 0x1F, 0x10, 0x1F,
+	0x14, 0x14, 0x14, 0x1F, 0x00,
+	0x10, 0x10, 0x10, 0xF0, 0x00,
+	0x00, 0x00, 0x00, 0x1F, 0x10,
+	0x10, 0x10, 0x10, 0x1F, 0x10,
+	0x10, 0x10, 0x10, 0xF0, 0x10,
+	0x00, 0x00, 0x00, 0xFF, 0x10,
+	0x10, 0x10, 0x10, 0x10, 0x10,
+	0x10, 0x10, 0x10, 0xFF, 0x10,
+	0x00, 0x00, 0x00, 0xFF, 0x14,
+	0x00, 0x00, 0xFF, 0x00, 0xFF,
+	0x00, 0x00, 0x1F, 0x10, 0x17,
+	0x00, 0x00, 0xFC, 0x04, 0xF4,
+	0x14, 0x14, 0x17, 0x10, 0x17,
+	0x14, 0x14, 0xF4, 0x04, 0xF4,
+	0x00, 0x00, 0xFF, 0x00, 0xF7,
+	0x14, 0x14, 0x14, 0x14, 0x14,
+	0x14, 0x14, 0xF7, 0x00, 0xF7,
+	0x14, 0x14, 0x14, 0x17, 0x14,
+	0x10, 0x10, 0x1F, 0x10, 0x1F,
+	0x14, 0x14, 0x14, 0xF4, 0x14,
+	0x10, 0x10, 0xF0, 0x10, 0xF0,
+	0x00, 0x00, 0x1F, 0x10, 0x1F,
+	0x00, 0x00, 0x00, 0x1F, 0x14,
+	0x00, 0x00, 0x00, 0xFC, 0x14,
+	0x00, 0x00, 0xF0, 0x10, 0xF0,
+	0x10, 0x10, 0xFF, 0x10, 0xFF,
+	0x14, 0x14, 0x14, 0xFF, 0x14,
+	0x10, 0x10, 0x10, 0x1F, 0x00,
+	0x00, 0x00, 0x00, 0xF0, 0x10,
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+	0xFF, 0xFF, 0xFF, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0xFF, 0xFF,
+	0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
+	0x38, 0x44, 0x44, 0x38, 0x44,
+	0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta
+	0x7E, 0x02, 0x02, 0x06, 0x06,
+	0x02, 0x7E, 0x02, 0x7E, 0x02,
+	0x63, 0x55, 0x49, 0x41, 0x63,
+	0x38, 0x44, 0x44, 0x3C, 0x04,
+	0x40, 0x7E, 0x20, 0x1E, 0x20,
+	0x06, 0x02, 0x7E, 0x02, 0x02,
+	0x99, 0xA5, 0xE7, 0xA5, 0x99,
+	0x1C, 0x2A, 0x49, 0x2A, 0x1C,
+	0x4C, 0x72, 0x01, 0x72, 0x4C,
+	0x30, 0x4A, 0x4D, 0x4D, 0x30,
+	0x30, 0x48, 0x78, 0x48, 0x30,
+	0xBC, 0x62, 0x5A, 0x46, 0x3D,
+	0x3E, 0x49, 0x49, 0x49, 0x00,
+	0x7E, 0x01, 0x01, 0x01, 0x7E,
+	0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
+	0x44, 0x44, 0x5F, 0x44, 0x44,
+	0x40, 0x51, 0x4A, 0x44, 0x40,
+	0x40, 0x44, 0x4A, 0x51, 0x40,
+	0x00, 0x00, 0xFF, 0x01, 0x03,
+	0xE0, 0x80, 0xFF, 0x00, 0x00,
+	0x08, 0x08, 0x6B, 0x6B, 0x08,
+	0x36, 0x12, 0x36, 0x24, 0x36,
+	0x06, 0x0F, 0x09, 0x0F, 0x06,
+	0x00, 0x00, 0x18, 0x18, 0x00,
+	0x00, 0x00, 0x10, 0x10, 0x00,
+	0x30, 0x40, 0xFF, 0x01, 0x01,
+	0x00, 0x1F, 0x01, 0x01, 0x1E,
+	0x00, 0x19, 0x1D, 0x17, 0x12,
+	0x00, 0x3C, 0x3C, 0x3C, 0x3C,
+	0x00, 0x00, 0x00, 0x00, 0x00  // #255 NBSP
+};
+#endif // FONT5X7_H
diff --git a/drivers/avr/pro_micro.h b/drivers/avr/pro_micro.h
new file mode 100644
index 000000000..f9e7ed75d
--- /dev/null
+++ b/drivers/avr/pro_micro.h
@@ -0,0 +1,362 @@
+/*
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+// Workaround for wrong definitions in "iom32u4.h".
+// This should be fixed in the AVR toolchain.
+#undef UHCON
+#undef UHINT
+#undef UHIEN
+#undef UHADDR
+#undef UHFNUM
+#undef UHFNUML
+#undef UHFNUMH
+#undef UHFLEN
+#undef UPINRQX
+#undef UPINTX
+#undef UPNUM
+#undef UPRST
+#undef UPCONX
+#undef UPCFG0X
+#undef UPCFG1X
+#undef UPSTAX
+#undef UPCFG2X
+#undef UPIENX
+#undef UPDATX
+#undef TCCR2A
+#undef WGM20
+#undef WGM21
+#undef COM2B0
+#undef COM2B1
+#undef COM2A0
+#undef COM2A1
+#undef TCCR2B
+#undef CS20
+#undef CS21
+#undef CS22
+#undef WGM22
+#undef FOC2B
+#undef FOC2A
+#undef TCNT2
+#undef TCNT2_0
+#undef TCNT2_1
+#undef TCNT2_2
+#undef TCNT2_3
+#undef TCNT2_4
+#undef TCNT2_5
+#undef TCNT2_6
+#undef TCNT2_7
+#undef OCR2A
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+#undef OCR2B
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+
+#define NUM_DIGITAL_PINS  30
+#define NUM_ANALOG_INPUTS 12
+
+#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
+#define TXLED0          PORTD |= (1<<5)
+#define TXLED1          PORTD &= ~(1<<5)
+#define RXLED0          PORTB |= (1<<0)
+#define RXLED1          PORTB &= ~(1<<0)
+
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 3;
+#define LED_BUILTIN 13
+
+// Map SPI port to 'new' pins D14..D17
+static const uint8_t SS   = 17;
+static const uint8_t MOSI = 16;
+static const uint8_t MISO = 14;
+static const uint8_t SCK  = 15;
+
+// Mapping of analog pins as digital I/O
+// A6-A11 share with digital pins
+static const uint8_t ADC0 = 18;
+static const uint8_t ADC1 = 19;
+static const uint8_t ADC2 = 20;
+static const uint8_t ADC3 = 21;
+static const uint8_t ADC4 = 22;
+static const uint8_t ADC5 = 23;
+static const uint8_t ADC6 = 24;   // D4
+static const uint8_t ADC7 = 25;   // D6
+static const uint8_t ADC8 = 26;   // D8
+static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC10 = 28;  // D10
+static const uint8_t ADC11 = 29;  // D12
+
+#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICRbit(p) 0
+#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
+#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
+
+//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
+extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
+#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
+
+#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
+
+#ifdef ARDUINO_MAIN
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
+//
+// D0               PD2                 RXD1/INT2
+// D1               PD3                 TXD1/INT3
+// D2               PD1     SDA         SDA/INT1
+// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
+// D4       A6      PD4                 ADC8
+// D5#              PC6     ???         OC3A/#OC4A
+// D6#      A7      PD7     FastPWM     #OC4D/ADC10
+// D7               PE6                 INT6/AIN0
+//
+// D8       A8      PB4                 ADC11/PCINT4
+// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
+// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
+// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
+// D12      A11     PD6                 T1/#OC4D/ADC9
+// D13#             PC7     PWM10       CLK0/OC4A
+//
+// A0       D18     PF7                 ADC7
+// A1       D19     PF6                 ADC6
+// A2       D20     PF5                 ADC5
+// A3       D21     PF4                 ADC4
+// A4       D22     PF1                 ADC1
+// A5       D23     PF0                 ADC0
+//
+// New pins D14..D17 to map SPI port to digital pins
+//
+// MISO     D14     PB3                 MISO,PCINT3
+// SCK      D15     PB1                 SCK,PCINT1
+// MOSI     D16     PB2                 MOSI,PCINT2
+// SS       D17     PB0                 RXLED,SS/PCINT0
+//
+// Connected LEDs on board for TX and RX
+// TXLED    D24     PD5                 XCK1
+// RXLED    D17     PB0
+// HWB              PE2                 HWB
+
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &DDRB,
+    (uint16_t) &DDRC,
+    (uint16_t) &DDRD,
+    (uint16_t) &DDRE,
+    (uint16_t) &DDRF,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PORTB,
+    (uint16_t) &PORTC,
+    (uint16_t) &PORTD,
+    (uint16_t) &PORTE,
+    (uint16_t) &PORTF,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PINB,
+    (uint16_t) &PINC,
+    (uint16_t) &PIND,
+    (uint16_t) &PINE,
+    (uint16_t) &PINF,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+    PD, // D0 - PD2
+    PD, // D1 - PD3
+    PD, // D2 - PD1
+    PD, // D3 - PD0
+    PD, // D4 - PD4
+    PC, // D5 - PC6
+    PD, // D6 - PD7
+    PE, // D7 - PE6
+
+    PB, // D8 - PB4
+    PB, // D9 - PB5
+    PB, // D10 - PB6
+    PB, // D11 - PB7
+    PD, // D12 - PD6
+    PC, // D13 - PC7
+
+    PB, // D14 - MISO - PB3
+    PB, // D15 - SCK - PB1
+    PB, // D16 - MOSI - PB2
+    PB, // D17 - SS - PB0
+
+    PF, // D18 - A0 - PF7
+    PF, // D19 - A1 - PF6
+    PF, // D20 - A2 - PF5
+    PF, // D21 - A3 - PF4
+    PF, // D22 - A4 - PF1
+    PF, // D23 - A5 - PF0
+
+    PD, // D24 - PD5
+    PD, // D25 / D6 - A7 - PD7
+    PB, // D26 / D8 - A8 - PB4
+    PB, // D27 / D9 - A9 - PB5
+    PB, // D28 / D10 - A10 - PB6
+    PD, // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+    _BV(2), // D0 - PD2
+    _BV(3), // D1 - PD3
+    _BV(1), // D2 - PD1
+    _BV(0), // D3 - PD0
+    _BV(4), // D4 - PD4
+    _BV(6), // D5 - PC6
+    _BV(7), // D6 - PD7
+    _BV(6), // D7 - PE6
+
+    _BV(4), // D8 - PB4
+    _BV(5), // D9 - PB5
+    _BV(6), // D10 - PB6
+    _BV(7), // D11 - PB7
+    _BV(6), // D12 - PD6
+    _BV(7), // D13 - PC7
+
+    _BV(3), // D14 - MISO - PB3
+    _BV(1), // D15 - SCK - PB1
+    _BV(2), // D16 - MOSI - PB2
+    _BV(0), // D17 - SS - PB0
+
+    _BV(7), // D18 - A0 - PF7
+    _BV(6), // D19 - A1 - PF6
+    _BV(5), // D20 - A2 - PF5
+    _BV(4), // D21 - A3 - PF4
+    _BV(1), // D22 - A4 - PF1
+    _BV(0), // D23 - A5 - PF0
+
+    _BV(5), // D24 - PD5
+    _BV(7), // D25 / D6 - A7 - PD7
+    _BV(4), // D26 / D8 - A8 - PB4
+    _BV(5), // D27 / D9 - A9 - PB5
+    _BV(6), // D28 / D10 - A10 - PB6
+    _BV(6), // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    TIMER0B,        /* 3 */
+    NOT_ON_TIMER,
+    TIMER3A,        /* 5 */
+    TIMER4D,        /* 6 */
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    TIMER1A,        /* 9 */
+    TIMER1B,        /* 10 */
+    TIMER0A,        /* 11 */
+
+    NOT_ON_TIMER,
+    TIMER4A,        /* 13 */
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+};
+
+const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
+    7,  // A0               PF7                 ADC7
+    6,  // A1               PF6                 ADC6
+    5,  // A2               PF5                 ADC5
+    4,  // A3               PF4                 ADC4
+    1,  // A4               PF1                 ADC1
+    0,  // A5               PF0                 ADC0
+    8,  // A6       D4      PD4                 ADC8
+    10, // A7       D6      PD7                 ADC10
+    11, // A8       D8      PB4                 ADC11
+    12, // A9       D9      PB5                 ADC12
+    13, // A10      D10     PB6                 ADC13
+    9   // A11      D12     PD6                 ADC9
+};
+
+#endif /* ARDUINO_MAIN */
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR        Serial
+#define SERIAL_PORT_USBVIRTUAL     Serial
+#define SERIAL_PORT_HARDWARE       Serial1
+#define SERIAL_PORT_HARDWARE_OPEN  Serial1
+
+#endif /* Pins_Arduino_h */
diff --git a/drivers/avr/ssd1306.c b/drivers/avr/ssd1306.c
new file mode 100644
index 000000000..f9312d2dc
--- /dev/null
+++ b/drivers/avr/ssd1306.c
@@ -0,0 +1,470 @@
+#ifdef SSD1306OLED
+
+#include "ssd1306.h"
+#include "config.h"
+#include "i2c.h"
+#include <string.h>
+#include "print.h"
+#include "lets_split.h"
+#include "glcdfont.c"
+#ifdef ADAFRUIT_BLE_ENABLE
+#include "adafruit_ble.h"
+#endif
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#endif
+#include "sendchar.h"
+#include "pincontrol.h"
+
+//assign the right code to your layers
+#define _BASE 0
+#define _LOWER 8
+#define _RAISE 16
+#define _FNLAYER 64
+#define _NUMLAY 128
+#define _NLOWER 136
+#define _NFNLAYER 192
+#define _MOUSECURSOR 256
+#define _ADJUST 65560
+
+// Set this to 1 to help diagnose early startup problems
+// when testing power-on with ble.  Turn it off otherwise,
+// as the latency of printing most of the debug info messes
+// with the matrix scan, causing keys to drop.
+#define DEBUG_TO_SCREEN 0
+
+// Controls the SSD1306 128x32 OLED display via i2c
+
+#define i2cAddress 0x3C
+
+#define DisplayHeight 32
+#define DisplayWidth 128
+
+#define FontHeight 8
+#define FontWidth 6
+
+#define MatrixRows (DisplayHeight / FontHeight)
+#define MatrixCols (DisplayWidth / FontWidth)
+
+struct CharacterMatrix {
+  uint8_t display[MatrixRows][MatrixCols];
+  uint8_t *cursor;
+  bool dirty;
+};
+
+static struct CharacterMatrix display;
+//static uint16_t last_battery_update;
+//static uint32_t vbat;
+//#define BatteryUpdateInterval 10000 /* milliseconds */
+#define ScreenOffInterval 300000 /* milliseconds */
+#if DEBUG_TO_SCREEN
+static uint8_t displaying;
+#endif
+static uint16_t last_flush;
+
+enum ssd1306_cmds {
+  DisplayOff = 0xAE,
+  DisplayOn = 0xAF,
+
+  SetContrast = 0x81,
+  DisplayAllOnResume = 0xA4,
+
+  DisplayAllOn = 0xA5,
+  NormalDisplay = 0xA6,
+  InvertDisplay = 0xA7,
+  SetDisplayOffset = 0xD3,
+  SetComPins = 0xda,
+  SetVComDetect = 0xdb,
+  SetDisplayClockDiv = 0xD5,
+  SetPreCharge = 0xd9,
+  SetMultiPlex = 0xa8,
+  SetLowColumn = 0x00,
+  SetHighColumn = 0x10,
+  SetStartLine = 0x40,
+
+  SetMemoryMode = 0x20,
+  ColumnAddr = 0x21,
+  PageAddr = 0x22,
+
+  ComScanInc = 0xc0,
+  ComScanDec = 0xc8,
+  SegRemap = 0xa0,
+  SetChargePump = 0x8d,
+  ExternalVcc = 0x01,
+  SwitchCapVcc = 0x02,
+
+  ActivateScroll = 0x2f,
+  DeActivateScroll = 0x2e,
+  SetVerticalScrollArea = 0xa3,
+  RightHorizontalScroll = 0x26,
+  LeftHorizontalScroll = 0x27,
+  VerticalAndRightHorizontalScroll = 0x29,
+  VerticalAndLeftHorizontalScroll = 0x2a,
+};
+
+
+// Write command sequence.
+// Returns true on success.
+static inline bool _send_cmd1(uint8_t cmd) {
+  bool res = false;
+
+  if (i2c_start_write(i2cAddress)) {
+    xprintf("failed to start write to %d\n", i2cAddress);
+    goto done;
+  }
+
+  if (i2c_master_write(0x0 /* command byte follows */)) {
+    print("failed to write control byte\n");
+
+    goto done;
+  }
+
+  if (i2c_master_write(cmd)) {
+    xprintf("failed to write command %d\n", cmd);
+    goto done;
+  }
+  res = true;
+done:
+  i2c_master_stop();
+  return res;
+}
+
+// Write 2-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
+  if (!_send_cmd1(cmd)) {
+    return false;
+  }
+  return _send_cmd1(opr);
+}
+
+// Write 3-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
+  if (!_send_cmd1(cmd)) {
+    return false;
+  }
+  if (!_send_cmd1(opr1)) {
+    return false;
+  }
+  return _send_cmd1(opr2);
+}
+
+#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
+#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
+#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
+
+static void matrix_clear(struct CharacterMatrix *matrix);
+
+static void clear_display(void) {
+  matrix_clear(&display);
+
+  // Clear all of the display bits (there can be random noise
+  // in the RAM on startup)
+  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
+  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
+
+  if (i2c_start_write(i2cAddress)) {
+    goto done;
+  }
+  if (i2c_master_write(0x40)) {
+    // Data mode
+    goto done;
+  }
+  for (uint8_t row = 0; row < MatrixRows; ++row) {
+    for (uint8_t col = 0; col < DisplayWidth; ++col) {
+      i2c_master_write(0);
+    }
+  }
+
+  display.dirty = false;
+
+done:
+  i2c_master_stop();
+}
+
+#if DEBUG_TO_SCREEN
+#undef sendchar
+static int8_t capture_sendchar(uint8_t c) {
+  sendchar(c);
+  iota_gfx_write_char(c);
+
+  if (!displaying) {
+    iota_gfx_flush();
+  }
+  return 0;
+}
+#endif
+
+bool iota_gfx_init(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOff);
+  send_cmd2(SetDisplayClockDiv, 0x80);
+  send_cmd2(SetMultiPlex, DisplayHeight - 1);
+
+  send_cmd2(SetDisplayOffset, 0);
+
+
+  send_cmd1(SetStartLine | 0x0);
+  send_cmd2(SetChargePump, 0x14 /* Enable */);
+  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
+
+/// Flips the display orientation 0 degrees
+  send_cmd1(SegRemap | 0x1);
+  send_cmd1(ComScanDec);
+/*
+// the following Flip the display orientation 180 degrees
+  send_cmd1(SegRemap);
+  send_cmd1(ComScanInc);
+// end flip */
+  send_cmd2(SetComPins, 0x2);
+  send_cmd2(SetContrast, 0x8f);
+  send_cmd2(SetPreCharge, 0xf1);
+  send_cmd2(SetVComDetect, 0x40);
+  send_cmd1(DisplayAllOnResume);
+  send_cmd1(NormalDisplay);
+  send_cmd1(DeActivateScroll);
+  send_cmd1(DisplayOn);
+
+  send_cmd2(SetContrast, 0); // Dim
+
+  clear_display();
+
+  success = true;
+
+  iota_gfx_flush();
+
+#if DEBUG_TO_SCREEN
+  print_set_sendchar(capture_sendchar);
+#endif
+
+done:
+  return success;
+}
+
+bool iota_gfx_off(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOff);
+  success = true;
+
+done:
+  return success;
+} 
+
+bool iota_gfx_on(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOn);
+  success = true;
+
+done:
+  return success;
+}
+
+static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
+  *matrix->cursor = c;
+  ++matrix->cursor;
+
+  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
+    // We went off the end; scroll the display upwards by one line
+    memmove(&matrix->display[0], &matrix->display[1],
+            MatrixCols * (MatrixRows - 1));
+    matrix->cursor = &matrix->display[MatrixRows - 1][0];
+    memset(matrix->cursor, ' ', MatrixCols);
+  }
+}
+
+static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
+  matrix->dirty = true;
+
+  if (c == '\n') {
+    // Clear to end of line from the cursor and then move to the
+    // start of the next line
+    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
+
+    while (cursor_col++ < MatrixCols) {
+      matrix_write_char_inner(matrix, ' ');
+    }
+    return;
+  }
+
+  matrix_write_char_inner(matrix, c);
+}
+
+void iota_gfx_write_char(uint8_t c) {
+  matrix_write_char(&display, c);
+}
+
+static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
+  const char *end = data + strlen(data);
+  while (data < end) {
+    matrix_write_char(matrix, *data);
+    ++data;
+  }
+}
+
+void iota_gfx_write(const char *data) {
+  matrix_write(&display, data);
+}
+
+static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
+  while (true) {
+    uint8_t c = pgm_read_byte(data);
+    if (c == 0) {
+      return;
+    }
+    matrix_write_char(matrix, c);
+    ++data;
+  }
+}
+
+void iota_gfx_write_P(const char *data) {
+  matrix_write_P(&display, data);
+}
+
+static void matrix_clear(struct CharacterMatrix *matrix) {
+  memset(matrix->display, ' ', sizeof(matrix->display));
+  matrix->cursor = &matrix->display[0][0];
+  matrix->dirty = true;
+}
+
+void iota_gfx_clear_screen(void) {
+  matrix_clear(&display);
+}
+
+static void matrix_render(struct CharacterMatrix *matrix) {
+  last_flush = timer_read();
+  iota_gfx_on();
+#if DEBUG_TO_SCREEN
+  ++displaying;
+#endif
+
+  // Move to the home position
+  send_cmd3(PageAddr, 0, MatrixRows - 1);
+  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
+
+  if (i2c_start_write(i2cAddress)) {
+    goto done;
+  }
+  if (i2c_master_write(0x40)) {
+    // Data mode
+    goto done;
+  }
+
+  for (uint8_t row = 0; row < MatrixRows; ++row) {
+    for (uint8_t col = 0; col < MatrixCols; ++col) {
+      const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
+
+      for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
+        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
+        i2c_master_write(colBits);
+      }
+
+      // 1 column of space between chars (it's not included in the glyph)
+      i2c_master_write(0);
+    }
+  }
+
+  matrix->dirty = false;
+
+done:
+  i2c_master_stop();
+#if DEBUG_TO_SCREEN
+  --displaying;
+#endif
+}
+
+void iota_gfx_flush(void) {
+  matrix_render(&display);
+}
+
+static void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+static void render_status_info(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case _BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case _RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case _LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case _ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+  
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}
+
+void iota_gfx_task(void) {
+  render_status_info();
+
+  if (display.dirty) {
+    iota_gfx_flush();
+  }
+
+  if (timer_elapsed(last_flush) > ScreenOffInterval) {
+    iota_gfx_off();
+  }
+}
+#endif
diff --git a/drivers/avr/ssd1306.h b/drivers/avr/ssd1306.h
new file mode 100644
index 000000000..b0c74f987
--- /dev/null
+++ b/drivers/avr/ssd1306.h
@@ -0,0 +1,17 @@
+#ifndef SSD1306_H
+#define SSD1306_H
+
+#include <stdbool.h>
+#include <stdio.h>
+
+bool iota_gfx_init(void);
+void iota_gfx_task(void);
+bool iota_gfx_off(void);
+bool iota_gfx_on(void);
+void iota_gfx_flush(void);
+void iota_gfx_write_char(uint8_t c);
+void iota_gfx_write(const char *data);
+void iota_gfx_write_P(const char *data);
+void iota_gfx_clear_screen(void);
+
+#endif
diff --git a/drivers/avr/ws2812.c b/drivers/avr/ws2812.c
new file mode 100644
index 000000000..59e032bf7
--- /dev/null
+++ b/drivers/avr/ws2812.c
@@ -0,0 +1,342 @@
+/*
+* light weight WS2812 lib V2.0b
+*
+* Controls WS2811/WS2812/WS2812B RGB-LEDs
+* Author: Tim (cpldcpu@gmail.com)
+*
+* Jan 18th, 2014  v2.0b Initial Version
+* Nov 29th, 2015  v2.3  Added SK6812RGBW support
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ws2812.h"
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "debug.h"
+
+#ifdef RGBW_BB_TWI
+
+// Port for the I2C
+#define I2C_DDR DDRD
+#define I2C_PIN PIND
+#define I2C_PORT PORTD
+
+// Pins to be used in the bit banging
+#define I2C_CLK 0
+#define I2C_DAT 1
+
+#define I2C_DATA_HI()\
+I2C_DDR &= ~ (1 << I2C_DAT);\
+I2C_PORT |= (1 << I2C_DAT);
+#define I2C_DATA_LO()\
+I2C_DDR |= (1 << I2C_DAT);\
+I2C_PORT &= ~ (1 << I2C_DAT);
+
+#define I2C_CLOCK_HI()\
+I2C_DDR &= ~ (1 << I2C_CLK);\
+I2C_PORT |= (1 << I2C_CLK);
+#define I2C_CLOCK_LO()\
+I2C_DDR |= (1 << I2C_CLK);\
+I2C_PORT &= ~ (1 << I2C_CLK);
+
+#define I2C_DELAY 1
+
+void I2C_WriteBit(unsigned char c)
+{
+    if (c > 0)
+    {
+        I2C_DATA_HI();
+    }
+    else
+    {
+        I2C_DATA_LO();
+    }
+
+    I2C_CLOCK_HI();
+    _delay_us(I2C_DELAY);
+
+    I2C_CLOCK_LO();
+    _delay_us(I2C_DELAY);
+
+    if (c > 0)
+    {
+        I2C_DATA_LO();
+    }
+
+    _delay_us(I2C_DELAY);
+}
+
+// Inits bitbanging port, must be called before using the functions below
+//
+void I2C_Init(void)
+{
+    I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
+
+    I2C_CLOCK_HI();
+    I2C_DATA_HI();
+
+    _delay_us(I2C_DELAY);
+}
+
+// Send a START Condition
+//
+void I2C_Start(void)
+{
+    // set both to high at the same time
+    I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
+    _delay_us(I2C_DELAY);
+
+    I2C_DATA_LO();
+    _delay_us(I2C_DELAY);
+
+    I2C_CLOCK_LO();
+    _delay_us(I2C_DELAY);
+}
+
+// Send a STOP Condition
+//
+void I2C_Stop(void)
+{
+    I2C_CLOCK_HI();
+    _delay_us(I2C_DELAY);
+
+    I2C_DATA_HI();
+    _delay_us(I2C_DELAY);
+}
+
+// write a byte to the I2C slave device
+//
+unsigned char I2C_Write(unsigned char c)
+{
+    for (char i = 0; i < 8; i++)
+    {
+        I2C_WriteBit(c & 128);
+
+        c <<= 1;
+    }
+
+    
+    I2C_WriteBit(0);
+    _delay_us(I2C_DELAY);
+    _delay_us(I2C_DELAY);
+  
+    // _delay_us(I2C_DELAY);
+    //return I2C_ReadBit();
+    return 0;
+}
+
+
+#endif
+
+// Setleds for standard RGB
+void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds)
+{
+   // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
+   ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF));
+}
+
+void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask)
+{
+  // ws2812_DDRREG |= pinmask; // Enable DDR
+  // new universal format (DDR)
+  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
+
+  ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask);
+  _delay_us(50);
+}
+
+// Setleds for SK6812RGBW
+void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds)
+{
+
+  #ifdef RGBW_BB_TWI
+    uint8_t sreg_prev, twcr_prev;
+    sreg_prev=SREG;
+    twcr_prev=TWCR;
+    cli();
+    TWCR &= ~(1<<TWEN);
+    I2C_Init();
+    I2C_Start();
+    I2C_Write(0x84);
+    uint16_t datlen = leds<<2;
+    uint8_t curbyte;
+    uint8_t * data = (uint8_t*)ledarray;
+    while (datlen--) {
+      curbyte=*data++;
+      I2C_Write(curbyte);
+    }
+    I2C_Stop();
+    SREG=sreg_prev;
+    TWCR=twcr_prev;
+  #endif
+
+
+  // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
+  // new universal format (DDR)
+  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF);
+
+  ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF));
+
+
+  #ifndef RGBW_BB_TWI
+    _delay_us(80);
+  #endif
+}
+
+void ws2812_sendarray(uint8_t *data,uint16_t datlen)
+{
+  ws2812_sendarray_mask(data,datlen,_BV(RGB_DI_PIN & 0xF));
+}
+
+/*
+  This routine writes an array of bytes with RGB values to the Dataout pin
+  using the fast 800kHz clockless WS2811/2812 protocol.
+*/
+
+// Timing in ns
+#define w_zeropulse   350
+#define w_onepulse    900
+#define w_totalperiod 1250
+
+// Fixed cycles used by the inner loop
+#define w_fixedlow    2
+#define w_fixedhigh   4
+#define w_fixedtotal  8
+
+// Insert NOPs to match the timing, if possible
+#define w_zerocycles    (((F_CPU/1000)*w_zeropulse          )/1000000)
+#define w_onecycles     (((F_CPU/1000)*w_onepulse    +500000)/1000000)
+#define w_totalcycles   (((F_CPU/1000)*w_totalperiod +500000)/1000000)
+
+// w1 - nops between rising edge and falling edge - low
+#define w1 (w_zerocycles-w_fixedlow)
+// w2   nops between fe low and fe high
+#define w2 (w_onecycles-w_fixedhigh-w1)
+// w3   nops to complete loop
+#define w3 (w_totalcycles-w_fixedtotal-w1-w2)
+
+#if w1>0
+  #define w1_nops w1
+#else
+  #define w1_nops  0
+#endif
+
+// The only critical timing parameter is the minimum pulse length of the "0"
+// Warn or throw error if this timing can not be met with current F_CPU settings.
+#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000)
+#if w_lowtime>550
+   #error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
+#elif w_lowtime>450
+   #warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
+   #warning "Please consider a higher clockspeed, if possible"
+#endif
+
+#if w2>0
+#define w2_nops w2
+#else
+#define w2_nops  0
+#endif
+
+#if w3>0
+#define w3_nops w3
+#else
+#define w3_nops  0
+#endif
+
+#define w_nop1  "nop      \n\t"
+#define w_nop2  "rjmp .+0 \n\t"
+#define w_nop4  w_nop2 w_nop2
+#define w_nop8  w_nop4 w_nop4
+#define w_nop16 w_nop8 w_nop8
+
+void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi)
+{
+  uint8_t curbyte,ctr,masklo;
+  uint8_t sreg_prev;
+
+  // masklo  =~maskhi&ws2812_PORTREG;
+  // maskhi |=        ws2812_PORTREG;
+  masklo  =~maskhi&_SFR_IO8((RGB_DI_PIN >> 4) + 2);
+  maskhi |=        _SFR_IO8((RGB_DI_PIN >> 4) + 2);
+  sreg_prev=SREG;
+  cli();
+
+  while (datlen--) {
+    curbyte=(*data++);
+
+    asm volatile(
+    "       ldi   %0,8  \n\t"
+    "loop%=:            \n\t"
+    "       out   %2,%3 \n\t"    //  '1' [01] '0' [01] - re
+#if (w1_nops&1)
+w_nop1
+#endif
+#if (w1_nops&2)
+w_nop2
+#endif
+#if (w1_nops&4)
+w_nop4
+#endif
+#if (w1_nops&8)
+w_nop8
+#endif
+#if (w1_nops&16)
+w_nop16
+#endif
+    "       sbrs  %1,7  \n\t"    //  '1' [03] '0' [02]
+    "       out   %2,%4 \n\t"    //  '1' [--] '0' [03] - fe-low
+    "       lsl   %1    \n\t"    //  '1' [04] '0' [04]
+#if (w2_nops&1)
+  w_nop1
+#endif
+#if (w2_nops&2)
+  w_nop2
+#endif
+#if (w2_nops&4)
+  w_nop4
+#endif
+#if (w2_nops&8)
+  w_nop8
+#endif
+#if (w2_nops&16)
+  w_nop16
+#endif
+    "       out   %2,%4 \n\t"    //  '1' [+1] '0' [+1] - fe-high
+#if (w3_nops&1)
+w_nop1
+#endif
+#if (w3_nops&2)
+w_nop2
+#endif
+#if (w3_nops&4)
+w_nop4
+#endif
+#if (w3_nops&8)
+w_nop8
+#endif
+#if (w3_nops&16)
+w_nop16
+#endif
+
+    "       dec   %0    \n\t"    //  '1' [+2] '0' [+2]
+    "       brne  loop%=\n\t"    //  '1' [+3] '0' [+4]
+    :	"=&d" (ctr)
+    :	"r" (curbyte), "I" (_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r" (maskhi), "r" (masklo)
+    );
+  }
+
+  SREG=sreg_prev;
+}
diff --git a/drivers/avr/ws2812.h b/drivers/avr/ws2812.h
new file mode 100644
index 000000000..60924a0fb
--- /dev/null
+++ b/drivers/avr/ws2812.h
@@ -0,0 +1,91 @@
+/*
+ * light weight WS2812 lib include
+ *
+ * Version 2.3  - Nev 29th 2015
+ * Author: Tim (cpldcpu@gmail.com)
+ *
+ * Please do not change this file! All configuration is handled in "ws2812_config.h"
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef LIGHT_WS2812_H_
+#define LIGHT_WS2812_H_
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+//#include "ws2812_config.h"
+//#include "i2cmaster.h"
+
+#ifdef RGBW
+  #define LED_TYPE struct cRGBW
+#else
+  #define LED_TYPE struct cRGB
+#endif
+
+
+/*
+ *  Structure of the LED array
+ *
+ * cRGB:     RGB  for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106
+ * cRGBW:    RGBW for SK6812RGBW
+ */
+
+struct cRGB  { uint8_t g; uint8_t r; uint8_t b; };
+struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;};
+
+
+
+/* User Interface
+ *
+ * Input:
+ *         ledarray:           An array of GRB data describing the LED colors
+ *         number_of_leds:     The number of LEDs to write
+ *         pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
+ *
+ * The functions will perform the following actions:
+ *         - Set the data-out pin as output
+ *         - Send out the LED data
+ *         - Wait 50�s to reset the LEDs
+ */
+
+void ws2812_setleds     (LED_TYPE *ledarray, uint16_t number_of_leds);
+void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
+void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
+
+/*
+ * Old interface / Internal functions
+ *
+ * The functions take a byte-array and send to the data output as WS2812 bitstream.
+ * The length is the number of bytes to send - three per LED.
+ */
+
+void ws2812_sendarray     (uint8_t *array,uint16_t length);
+void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
+
+
+/*
+ * Internal defines
+ */
+#ifndef CONCAT
+#define CONCAT(a, b)            a ## b
+#endif
+#ifndef CONCAT_EXP
+#define CONCAT_EXP(a, b)   CONCAT(a, b)
+#endif
+
+// #define ws2812_PORTREG  CONCAT_EXP(PORT,ws2812_port)
+// #define ws2812_DDRREG   CONCAT_EXP(DDR,ws2812_port)
+
+#endif /* LIGHT_WS2812_H_ */
diff --git a/keyboards/atreus62/pro_micro.h b/keyboards/atreus62/pro_micro.h
deleted file mode 100644
index f9e7ed75d..000000000
--- a/keyboards/atreus62/pro_micro.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS  30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
-
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */
diff --git a/keyboards/handwired/promethium/rgbsps.c b/keyboards/handwired/promethium/rgbsps.c
index f30badd35..84fac1ae1 100644
--- a/keyboards/handwired/promethium/rgbsps.c
+++ b/keyboards/handwired/promethium/rgbsps.c
@@ -1,4 +1,4 @@
-#include "light_ws2812.h"
+#include "ws2812.h"
 #include "rgbsps.h"
 
 struct cRGB led[RGBSPS_NUM];
diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk
index 6fa45b42b..69903dceb 100644
--- a/keyboards/handwired/promethium/rules.mk
+++ b/keyboards/handwired/promethium/rules.mk
@@ -72,7 +72,7 @@ BLUETOOTH = AdafruitBLE
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-SRC += $(QUANTUM_DIR)/light_ws2812.c
+SRC += ws2812.c
 SRC += rgbsps.c
-SRC += $(QUANTUM_DIR)/analog.c
+SRC += analog.c
 SRC += matrix.c
diff --git a/keyboards/lets_split/common/glcdfont.c b/keyboards/lets_split/common/glcdfont.c
deleted file mode 100644
index 6f88bd23a..000000000
--- a/keyboards/lets_split/common/glcdfont.c
+++ /dev/null
@@ -1,276 +0,0 @@
-// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
-// See gfxfont.h for newer custom bitmap font info.
-
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
-
-// Standard ASCII 5x7 font
-
-static const unsigned char font[] PROGMEM = {
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
-	0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
-	0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
-	0x18, 0x3C, 0x7E, 0x3C, 0x18,
-	0x1C, 0x57, 0x7D, 0x57, 0x1C,
-	0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
-	0x00, 0x18, 0x3C, 0x18, 0x00,
-	0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
-	0x00, 0x18, 0x24, 0x18, 0x00,
-	0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
-	0x30, 0x48, 0x3A, 0x06, 0x0E,
-	0x26, 0x29, 0x79, 0x29, 0x26,
-	0x40, 0x7F, 0x05, 0x05, 0x07,
-	0x40, 0x7F, 0x05, 0x25, 0x3F,
-	0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
-	0x7F, 0x3E, 0x1C, 0x1C, 0x08,
-	0x08, 0x1C, 0x1C, 0x3E, 0x7F,
-	0x14, 0x22, 0x7F, 0x22, 0x14,
-	0x5F, 0x5F, 0x00, 0x5F, 0x5F,
-	0x06, 0x09, 0x7F, 0x01, 0x7F,
-	0x00, 0x66, 0x89, 0x95, 0x6A,
-	0x60, 0x60, 0x60, 0x60, 0x60,
-	0x94, 0xA2, 0xFF, 0xA2, 0x94,
-	0x08, 0x04, 0x7E, 0x04, 0x08,
-	0x10, 0x20, 0x7E, 0x20, 0x10,
-	0x08, 0x08, 0x2A, 0x1C, 0x08,
-	0x08, 0x1C, 0x2A, 0x08, 0x08,
-	0x1E, 0x10, 0x10, 0x10, 0x10,
-	0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
-	0x30, 0x38, 0x3E, 0x38, 0x30,
-	0x06, 0x0E, 0x3E, 0x0E, 0x06,
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x5F, 0x00, 0x00,
-	0x00, 0x07, 0x00, 0x07, 0x00,
-	0x14, 0x7F, 0x14, 0x7F, 0x14,
-	0x24, 0x2A, 0x7F, 0x2A, 0x12,
-	0x23, 0x13, 0x08, 0x64, 0x62,
-	0x36, 0x49, 0x56, 0x20, 0x50,
-	0x00, 0x08, 0x07, 0x03, 0x00,
-	0x00, 0x1C, 0x22, 0x41, 0x00,
-	0x00, 0x41, 0x22, 0x1C, 0x00,
-	0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
-	0x08, 0x08, 0x3E, 0x08, 0x08,
-	0x00, 0x80, 0x70, 0x30, 0x00,
-	0x08, 0x08, 0x08, 0x08, 0x08,
-	0x00, 0x00, 0x60, 0x60, 0x00,
-	0x20, 0x10, 0x08, 0x04, 0x02,
-	0x3E, 0x51, 0x49, 0x45, 0x3E,
-	0x00, 0x42, 0x7F, 0x40, 0x00,
-	0x72, 0x49, 0x49, 0x49, 0x46,
-	0x21, 0x41, 0x49, 0x4D, 0x33,
-	0x18, 0x14, 0x12, 0x7F, 0x10,
-	0x27, 0x45, 0x45, 0x45, 0x39,
-	0x3C, 0x4A, 0x49, 0x49, 0x31,
-	0x41, 0x21, 0x11, 0x09, 0x07,
-	0x36, 0x49, 0x49, 0x49, 0x36,
-	0x46, 0x49, 0x49, 0x29, 0x1E,
-	0x00, 0x00, 0x14, 0x00, 0x00,
-	0x00, 0x40, 0x34, 0x00, 0x00,
-	0x00, 0x08, 0x14, 0x22, 0x41,
-	0x14, 0x14, 0x14, 0x14, 0x14,
-	0x00, 0x41, 0x22, 0x14, 0x08,
-	0x02, 0x01, 0x59, 0x09, 0x06,
-	0x3E, 0x41, 0x5D, 0x59, 0x4E,
-	0x7C, 0x12, 0x11, 0x12, 0x7C,
-	0x7F, 0x49, 0x49, 0x49, 0x36,
-	0x3E, 0x41, 0x41, 0x41, 0x22,
-	0x7F, 0x41, 0x41, 0x41, 0x3E,
-	0x7F, 0x49, 0x49, 0x49, 0x41,
-	0x7F, 0x09, 0x09, 0x09, 0x01,
-	0x3E, 0x41, 0x41, 0x51, 0x73,
-	0x7F, 0x08, 0x08, 0x08, 0x7F,
-	0x00, 0x41, 0x7F, 0x41, 0x00,
-	0x20, 0x40, 0x41, 0x3F, 0x01,
-	0x7F, 0x08, 0x14, 0x22, 0x41,
-	0x7F, 0x40, 0x40, 0x40, 0x40,
-	0x7F, 0x02, 0x1C, 0x02, 0x7F,
-	0x7F, 0x04, 0x08, 0x10, 0x7F,
-	0x3E, 0x41, 0x41, 0x41, 0x3E,
-	0x7F, 0x09, 0x09, 0x09, 0x06,
-	0x3E, 0x41, 0x51, 0x21, 0x5E,
-	0x7F, 0x09, 0x19, 0x29, 0x46,
-	0x26, 0x49, 0x49, 0x49, 0x32,
-	0x03, 0x01, 0x7F, 0x01, 0x03,
-	0x3F, 0x40, 0x40, 0x40, 0x3F,
-	0x1F, 0x20, 0x40, 0x20, 0x1F,
-	0x3F, 0x40, 0x38, 0x40, 0x3F,
-	0x63, 0x14, 0x08, 0x14, 0x63,
-	0x03, 0x04, 0x78, 0x04, 0x03,
-	0x61, 0x59, 0x49, 0x4D, 0x43,
-	0x00, 0x7F, 0x41, 0x41, 0x41,
-	0x02, 0x04, 0x08, 0x10, 0x20,
-	0x00, 0x41, 0x41, 0x41, 0x7F,
-	0x04, 0x02, 0x01, 0x02, 0x04,
-	0x40, 0x40, 0x40, 0x40, 0x40,
-	0x00, 0x03, 0x07, 0x08, 0x00,
-	0x20, 0x54, 0x54, 0x78, 0x40,
-	0x7F, 0x28, 0x44, 0x44, 0x38,
-	0x38, 0x44, 0x44, 0x44, 0x28,
-	0x38, 0x44, 0x44, 0x28, 0x7F,
-	0x38, 0x54, 0x54, 0x54, 0x18,
-	0x00, 0x08, 0x7E, 0x09, 0x02,
-	0x18, 0xA4, 0xA4, 0x9C, 0x78,
-	0x7F, 0x08, 0x04, 0x04, 0x78,
-	0x00, 0x44, 0x7D, 0x40, 0x00,
-	0x20, 0x40, 0x40, 0x3D, 0x00,
-	0x7F, 0x10, 0x28, 0x44, 0x00,
-	0x00, 0x41, 0x7F, 0x40, 0x00,
-	0x7C, 0x04, 0x78, 0x04, 0x78,
-	0x7C, 0x08, 0x04, 0x04, 0x78,
-	0x38, 0x44, 0x44, 0x44, 0x38,
-	0xFC, 0x18, 0x24, 0x24, 0x18,
-	0x18, 0x24, 0x24, 0x18, 0xFC,
-	0x7C, 0x08, 0x04, 0x04, 0x08,
-	0x48, 0x54, 0x54, 0x54, 0x24,
-	0x04, 0x04, 0x3F, 0x44, 0x24,
-	0x3C, 0x40, 0x40, 0x20, 0x7C,
-	0x1C, 0x20, 0x40, 0x20, 0x1C,
-	0x3C, 0x40, 0x30, 0x40, 0x3C,
-	0x44, 0x28, 0x10, 0x28, 0x44,
-	0x4C, 0x90, 0x90, 0x90, 0x7C,
-	0x44, 0x64, 0x54, 0x4C, 0x44,
-	0x00, 0x08, 0x36, 0x41, 0x00,
-	0x00, 0x00, 0x77, 0x00, 0x00,
-	0x00, 0x41, 0x36, 0x08, 0x00,
-	0x02, 0x01, 0x02, 0x04, 0x02,
-	0x3C, 0x26, 0x23, 0x26, 0x3C,
-	0x1E, 0xA1, 0xA1, 0x61, 0x12,
-	0x3A, 0x40, 0x40, 0x20, 0x7A,
-	0x38, 0x54, 0x54, 0x55, 0x59,
-	0x21, 0x55, 0x55, 0x79, 0x41,
-	0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut
-	0x21, 0x55, 0x54, 0x78, 0x40,
-	0x20, 0x54, 0x55, 0x79, 0x40,
-	0x0C, 0x1E, 0x52, 0x72, 0x12,
-	0x39, 0x55, 0x55, 0x55, 0x59,
-	0x39, 0x54, 0x54, 0x54, 0x59,
-	0x39, 0x55, 0x54, 0x54, 0x58,
-	0x00, 0x00, 0x45, 0x7C, 0x41,
-	0x00, 0x02, 0x45, 0x7D, 0x42,
-	0x00, 0x01, 0x45, 0x7C, 0x40,
-	0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut
-	0xF0, 0x28, 0x25, 0x28, 0xF0,
-	0x7C, 0x54, 0x55, 0x45, 0x00,
-	0x20, 0x54, 0x54, 0x7C, 0x54,
-	0x7C, 0x0A, 0x09, 0x7F, 0x49,
-	0x32, 0x49, 0x49, 0x49, 0x32,
-	0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut
-	0x32, 0x4A, 0x48, 0x48, 0x30,
-	0x3A, 0x41, 0x41, 0x21, 0x7A,
-	0x3A, 0x42, 0x40, 0x20, 0x78,
-	0x00, 0x9D, 0xA0, 0xA0, 0x7D,
-	0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut
-	0x3D, 0x40, 0x40, 0x40, 0x3D,
-	0x3C, 0x24, 0xFF, 0x24, 0x24,
-	0x48, 0x7E, 0x49, 0x43, 0x66,
-	0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
-	0xFF, 0x09, 0x29, 0xF6, 0x20,
-	0xC0, 0x88, 0x7E, 0x09, 0x03,
-	0x20, 0x54, 0x54, 0x79, 0x41,
-	0x00, 0x00, 0x44, 0x7D, 0x41,
-	0x30, 0x48, 0x48, 0x4A, 0x32,
-	0x38, 0x40, 0x40, 0x22, 0x7A,
-	0x00, 0x7A, 0x0A, 0x0A, 0x72,
-	0x7D, 0x0D, 0x19, 0x31, 0x7D,
-	0x26, 0x29, 0x29, 0x2F, 0x28,
-	0x26, 0x29, 0x29, 0x29, 0x26,
-	0x30, 0x48, 0x4D, 0x40, 0x20,
-	0x38, 0x08, 0x08, 0x08, 0x08,
-	0x08, 0x08, 0x08, 0x08, 0x38,
-	0x2F, 0x10, 0xC8, 0xAC, 0xBA,
-	0x2F, 0x10, 0x28, 0x34, 0xFA,
-	0x00, 0x00, 0x7B, 0x00, 0x00,
-	0x08, 0x14, 0x2A, 0x14, 0x22,
-	0x22, 0x14, 0x2A, 0x14, 0x08,
-	0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code
-	0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block
-	0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block
-	0x00, 0x00, 0x00, 0xFF, 0x00,
-	0x10, 0x10, 0x10, 0xFF, 0x00,
-	0x14, 0x14, 0x14, 0xFF, 0x00,
-	0x10, 0x10, 0xFF, 0x00, 0xFF,
-	0x10, 0x10, 0xF0, 0x10, 0xF0,
-	0x14, 0x14, 0x14, 0xFC, 0x00,
-	0x14, 0x14, 0xF7, 0x00, 0xFF,
-	0x00, 0x00, 0xFF, 0x00, 0xFF,
-	0x14, 0x14, 0xF4, 0x04, 0xFC,
-	0x14, 0x14, 0x17, 0x10, 0x1F,
-	0x10, 0x10, 0x1F, 0x10, 0x1F,
-	0x14, 0x14, 0x14, 0x1F, 0x00,
-	0x10, 0x10, 0x10, 0xF0, 0x00,
-	0x00, 0x00, 0x00, 0x1F, 0x10,
-	0x10, 0x10, 0x10, 0x1F, 0x10,
-	0x10, 0x10, 0x10, 0xF0, 0x10,
-	0x00, 0x00, 0x00, 0xFF, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0xFF, 0x10,
-	0x00, 0x00, 0x00, 0xFF, 0x14,
-	0x00, 0x00, 0xFF, 0x00, 0xFF,
-	0x00, 0x00, 0x1F, 0x10, 0x17,
-	0x00, 0x00, 0xFC, 0x04, 0xF4,
-	0x14, 0x14, 0x17, 0x10, 0x17,
-	0x14, 0x14, 0xF4, 0x04, 0xF4,
-	0x00, 0x00, 0xFF, 0x00, 0xF7,
-	0x14, 0x14, 0x14, 0x14, 0x14,
-	0x14, 0x14, 0xF7, 0x00, 0xF7,
-	0x14, 0x14, 0x14, 0x17, 0x14,
-	0x10, 0x10, 0x1F, 0x10, 0x1F,
-	0x14, 0x14, 0x14, 0xF4, 0x14,
-	0x10, 0x10, 0xF0, 0x10, 0xF0,
-	0x00, 0x00, 0x1F, 0x10, 0x1F,
-	0x00, 0x00, 0x00, 0x1F, 0x14,
-	0x00, 0x00, 0x00, 0xFC, 0x14,
-	0x00, 0x00, 0xF0, 0x10, 0xF0,
-	0x10, 0x10, 0xFF, 0x10, 0xFF,
-	0x14, 0x14, 0x14, 0xFF, 0x14,
-	0x10, 0x10, 0x10, 0x1F, 0x00,
-	0x00, 0x00, 0x00, 0xF0, 0x10,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
-	0xFF, 0xFF, 0xFF, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0xFF, 0xFF,
-	0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
-	0x38, 0x44, 0x44, 0x38, 0x44,
-	0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta
-	0x7E, 0x02, 0x02, 0x06, 0x06,
-	0x02, 0x7E, 0x02, 0x7E, 0x02,
-	0x63, 0x55, 0x49, 0x41, 0x63,
-	0x38, 0x44, 0x44, 0x3C, 0x04,
-	0x40, 0x7E, 0x20, 0x1E, 0x20,
-	0x06, 0x02, 0x7E, 0x02, 0x02,
-	0x99, 0xA5, 0xE7, 0xA5, 0x99,
-	0x1C, 0x2A, 0x49, 0x2A, 0x1C,
-	0x4C, 0x72, 0x01, 0x72, 0x4C,
-	0x30, 0x4A, 0x4D, 0x4D, 0x30,
-	0x30, 0x48, 0x78, 0x48, 0x30,
-	0xBC, 0x62, 0x5A, 0x46, 0x3D,
-	0x3E, 0x49, 0x49, 0x49, 0x00,
-	0x7E, 0x01, 0x01, 0x01, 0x7E,
-	0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
-	0x44, 0x44, 0x5F, 0x44, 0x44,
-	0x40, 0x51, 0x4A, 0x44, 0x40,
-	0x40, 0x44, 0x4A, 0x51, 0x40,
-	0x00, 0x00, 0xFF, 0x01, 0x03,
-	0xE0, 0x80, 0xFF, 0x00, 0x00,
-	0x08, 0x08, 0x6B, 0x6B, 0x08,
-	0x36, 0x12, 0x36, 0x24, 0x36,
-	0x06, 0x0F, 0x09, 0x0F, 0x06,
-	0x00, 0x00, 0x18, 0x18, 0x00,
-	0x00, 0x00, 0x10, 0x10, 0x00,
-	0x30, 0x40, 0xFF, 0x01, 0x01,
-	0x00, 0x1F, 0x01, 0x01, 0x1E,
-	0x00, 0x19, 0x1D, 0x17, 0x12,
-	0x00, 0x3C, 0x3C, 0x3C, 0x3C,
-	0x00, 0x00, 0x00, 0x00, 0x00  // #255 NBSP
-};
-#endif // FONT5X7_H
diff --git a/keyboards/lets_split/pro_micro.h b/keyboards/lets_split/pro_micro.h
deleted file mode 100644
index f9e7ed75d..000000000
--- a/keyboards/lets_split/pro_micro.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS  30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
-
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */
diff --git a/keyboards/lets_split/ssd1306.c b/keyboards/lets_split/ssd1306.c
deleted file mode 100644
index 5c6dff27f..000000000
--- a/keyboards/lets_split/ssd1306.c
+++ /dev/null
@@ -1,470 +0,0 @@
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "config.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#include "lets_split.h"
-#include "common/glcdfont.c"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "pincontrol.h"
-
-//assign the right code to your layers
-#define _BASE 0
-#define _LOWER 8
-#define _RAISE 16
-#define _FNLAYER 64
-#define _NUMLAY 128
-#define _NLOWER 136
-#define _NFNLAYER 192
-#define _MOUSECURSOR 256
-#define _ADJUST 65560
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble.  Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#define i2cAddress 0x3C
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
-};
-
-static struct CharacterMatrix display;
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
-  bool res = false;
-
-  if (i2c_start_write(i2cAddress)) {
-    xprintf("failed to start write to %d\n", i2cAddress);
-    goto done;
-  }
-
-  if (i2c_master_write(0x0 /* command byte follows */)) {
-    print("failed to write control byte\n");
-
-    goto done;
-  }
-
-  if (i2c_master_write(cmd)) {
-    xprintf("failed to write command %d\n", cmd);
-    goto done;
-  }
-  res = true;
-done:
-  i2c_master_stop();
-  return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  if (!_send_cmd1(opr1)) {
-    return false;
-  }
-  return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void matrix_clear(struct CharacterMatrix *matrix);
-
-static void clear_display(void) {
-  matrix_clear(&display);
-
-  // Clear all of the display bits (there can be random noise
-  // in the RAM on startup)
-  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
-  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
-  if (i2c_start_write(i2cAddress)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < DisplayWidth; ++col) {
-      i2c_master_write(0);
-    }
-  }
-
-  display.dirty = false;
-
-done:
-  i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
-  sendchar(c);
-  iota_gfx_write_char(c);
-
-  if (!displaying) {
-    iota_gfx_flush();
-  }
-  return 0;
-}
-#endif
-
-bool iota_gfx_init(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  send_cmd2(SetDisplayClockDiv, 0x80);
-  send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
-  send_cmd2(SetDisplayOffset, 0);
-
-
-  send_cmd1(SetStartLine | 0x0);
-  send_cmd2(SetChargePump, 0x14 /* Enable */);
-  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
-/// Flips the display orientation 0 degrees
-  send_cmd1(SegRemap | 0x1);
-  send_cmd1(ComScanDec);
-/*
-// the following Flip the display orientation 180 degrees
-  send_cmd1(SegRemap);
-  send_cmd1(ComScanInc);
-// end flip */
-  send_cmd2(SetComPins, 0x2);
-  send_cmd2(SetContrast, 0x8f);
-  send_cmd2(SetPreCharge, 0xf1);
-  send_cmd2(SetVComDetect, 0x40);
-  send_cmd1(DisplayAllOnResume);
-  send_cmd1(NormalDisplay);
-  send_cmd1(DeActivateScroll);
-  send_cmd1(DisplayOn);
-
-  send_cmd2(SetContrast, 0); // Dim
-
-  clear_display();
-
-  success = true;
-
-  iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
-  print_set_sendchar(capture_sendchar);
-#endif
-
-done:
-  return success;
-}
-
-bool iota_gfx_off(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  success = true;
-
-done:
-  return success;
-} 
-
-bool iota_gfx_on(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOn);
-  success = true;
-
-done:
-  return success;
-}
-
-static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
-  *matrix->cursor = c;
-  ++matrix->cursor;
-
-  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
-    // We went off the end; scroll the display upwards by one line
-    memmove(&matrix->display[0], &matrix->display[1],
-            MatrixCols * (MatrixRows - 1));
-    matrix->cursor = &matrix->display[MatrixRows - 1][0];
-    memset(matrix->cursor, ' ', MatrixCols);
-  }
-}
-
-static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
-  matrix->dirty = true;
-
-  if (c == '\n') {
-    // Clear to end of line from the cursor and then move to the
-    // start of the next line
-    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
-    while (cursor_col++ < MatrixCols) {
-      matrix_write_char_inner(matrix, ' ');
-    }
-    return;
-  }
-
-  matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
-  matrix_write_char(&display, c);
-}
-
-static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    matrix_write_char(matrix, *data);
-    ++data;
-  }
-}
-
-void iota_gfx_write(const char *data) {
-  matrix_write(&display, data);
-}
-
-static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
-  while (true) {
-    uint8_t c = pgm_read_byte(data);
-    if (c == 0) {
-      return;
-    }
-    matrix_write_char(matrix, c);
-    ++data;
-  }
-}
-
-void iota_gfx_write_P(const char *data) {
-  matrix_write_P(&display, data);
-}
-
-static void matrix_clear(struct CharacterMatrix *matrix) {
-  memset(matrix->display, ' ', sizeof(matrix->display));
-  matrix->cursor = &matrix->display[0][0];
-  matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
-  matrix_clear(&display);
-}
-
-static void matrix_render(struct CharacterMatrix *matrix) {
-  last_flush = timer_read();
-  iota_gfx_on();
-#if DEBUG_TO_SCREEN
-  ++displaying;
-#endif
-
-  // Move to the home position
-  send_cmd3(PageAddr, 0, MatrixRows - 1);
-  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
-  if (i2c_start_write(i2cAddress)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < MatrixCols; ++col) {
-      const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
-
-      for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
-        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
-        i2c_master_write(colBits);
-      }
-
-      // 1 column of space between chars (it's not included in the glyph)
-      i2c_master_write(0);
-    }
-  }
-
-  matrix->dirty = false;
-
-done:
-  i2c_master_stop();
-#if DEBUG_TO_SCREEN
-  --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
-  matrix_render(&display);
-}
-
-static void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static void render_status_info(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case _BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case _RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case _LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case _ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-  
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
-}
-
-void iota_gfx_task(void) {
-  render_status_info();
-
-  if (display.dirty) {
-    iota_gfx_flush();
-  }
-
-  if (timer_elapsed(last_flush) > ScreenOffInterval) {
-    iota_gfx_off();
-  }
-}
-#endif
diff --git a/keyboards/lets_split/ssd1306.h b/keyboards/lets_split/ssd1306.h
deleted file mode 100644
index b0c74f987..000000000
--- a/keyboards/lets_split/ssd1306.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef SSD1306_H
-#define SSD1306_H
-
-#include <stdbool.h>
-#include <stdio.h>
-
-bool iota_gfx_init(void);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-#endif
diff --git a/keyboards/nyquist/pro_micro.h b/keyboards/nyquist/pro_micro.h
deleted file mode 100644
index f9e7ed75d..000000000
--- a/keyboards/nyquist/pro_micro.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS  30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
-
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */
diff --git a/keyboards/orthodox/pro_micro.h b/keyboards/orthodox/pro_micro.h
deleted file mode 100644
index f9e7ed75d..000000000
--- a/keyboards/orthodox/pro_micro.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS  30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
-
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */
diff --git a/keyboards/orthodox/ssd1306.c b/keyboards/orthodox/ssd1306.c
deleted file mode 100644
index 5c6dff27f..000000000
--- a/keyboards/orthodox/ssd1306.c
+++ /dev/null
@@ -1,470 +0,0 @@
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "config.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#include "lets_split.h"
-#include "common/glcdfont.c"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "pincontrol.h"
-
-//assign the right code to your layers
-#define _BASE 0
-#define _LOWER 8
-#define _RAISE 16
-#define _FNLAYER 64
-#define _NUMLAY 128
-#define _NLOWER 136
-#define _NFNLAYER 192
-#define _MOUSECURSOR 256
-#define _ADJUST 65560
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble.  Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#define i2cAddress 0x3C
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
-};
-
-static struct CharacterMatrix display;
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
-  bool res = false;
-
-  if (i2c_start_write(i2cAddress)) {
-    xprintf("failed to start write to %d\n", i2cAddress);
-    goto done;
-  }
-
-  if (i2c_master_write(0x0 /* command byte follows */)) {
-    print("failed to write control byte\n");
-
-    goto done;
-  }
-
-  if (i2c_master_write(cmd)) {
-    xprintf("failed to write command %d\n", cmd);
-    goto done;
-  }
-  res = true;
-done:
-  i2c_master_stop();
-  return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  if (!_send_cmd1(opr1)) {
-    return false;
-  }
-  return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void matrix_clear(struct CharacterMatrix *matrix);
-
-static void clear_display(void) {
-  matrix_clear(&display);
-
-  // Clear all of the display bits (there can be random noise
-  // in the RAM on startup)
-  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
-  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
-  if (i2c_start_write(i2cAddress)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < DisplayWidth; ++col) {
-      i2c_master_write(0);
-    }
-  }
-
-  display.dirty = false;
-
-done:
-  i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
-  sendchar(c);
-  iota_gfx_write_char(c);
-
-  if (!displaying) {
-    iota_gfx_flush();
-  }
-  return 0;
-}
-#endif
-
-bool iota_gfx_init(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  send_cmd2(SetDisplayClockDiv, 0x80);
-  send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
-  send_cmd2(SetDisplayOffset, 0);
-
-
-  send_cmd1(SetStartLine | 0x0);
-  send_cmd2(SetChargePump, 0x14 /* Enable */);
-  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
-/// Flips the display orientation 0 degrees
-  send_cmd1(SegRemap | 0x1);
-  send_cmd1(ComScanDec);
-/*
-// the following Flip the display orientation 180 degrees
-  send_cmd1(SegRemap);
-  send_cmd1(ComScanInc);
-// end flip */
-  send_cmd2(SetComPins, 0x2);
-  send_cmd2(SetContrast, 0x8f);
-  send_cmd2(SetPreCharge, 0xf1);
-  send_cmd2(SetVComDetect, 0x40);
-  send_cmd1(DisplayAllOnResume);
-  send_cmd1(NormalDisplay);
-  send_cmd1(DeActivateScroll);
-  send_cmd1(DisplayOn);
-
-  send_cmd2(SetContrast, 0); // Dim
-
-  clear_display();
-
-  success = true;
-
-  iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
-  print_set_sendchar(capture_sendchar);
-#endif
-
-done:
-  return success;
-}
-
-bool iota_gfx_off(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  success = true;
-
-done:
-  return success;
-} 
-
-bool iota_gfx_on(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOn);
-  success = true;
-
-done:
-  return success;
-}
-
-static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
-  *matrix->cursor = c;
-  ++matrix->cursor;
-
-  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
-    // We went off the end; scroll the display upwards by one line
-    memmove(&matrix->display[0], &matrix->display[1],
-            MatrixCols * (MatrixRows - 1));
-    matrix->cursor = &matrix->display[MatrixRows - 1][0];
-    memset(matrix->cursor, ' ', MatrixCols);
-  }
-}
-
-static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
-  matrix->dirty = true;
-
-  if (c == '\n') {
-    // Clear to end of line from the cursor and then move to the
-    // start of the next line
-    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
-    while (cursor_col++ < MatrixCols) {
-      matrix_write_char_inner(matrix, ' ');
-    }
-    return;
-  }
-
-  matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
-  matrix_write_char(&display, c);
-}
-
-static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    matrix_write_char(matrix, *data);
-    ++data;
-  }
-}
-
-void iota_gfx_write(const char *data) {
-  matrix_write(&display, data);
-}
-
-static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
-  while (true) {
-    uint8_t c = pgm_read_byte(data);
-    if (c == 0) {
-      return;
-    }
-    matrix_write_char(matrix, c);
-    ++data;
-  }
-}
-
-void iota_gfx_write_P(const char *data) {
-  matrix_write_P(&display, data);
-}
-
-static void matrix_clear(struct CharacterMatrix *matrix) {
-  memset(matrix->display, ' ', sizeof(matrix->display));
-  matrix->cursor = &matrix->display[0][0];
-  matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
-  matrix_clear(&display);
-}
-
-static void matrix_render(struct CharacterMatrix *matrix) {
-  last_flush = timer_read();
-  iota_gfx_on();
-#if DEBUG_TO_SCREEN
-  ++displaying;
-#endif
-
-  // Move to the home position
-  send_cmd3(PageAddr, 0, MatrixRows - 1);
-  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
-  if (i2c_start_write(i2cAddress)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < MatrixCols; ++col) {
-      const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
-
-      for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
-        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
-        i2c_master_write(colBits);
-      }
-
-      // 1 column of space between chars (it's not included in the glyph)
-      i2c_master_write(0);
-    }
-  }
-
-  matrix->dirty = false;
-
-done:
-  i2c_master_stop();
-#if DEBUG_TO_SCREEN
-  --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
-  matrix_render(&display);
-}
-
-static void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static void render_status_info(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case _BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case _RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case _LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case _ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-  
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
-}
-
-void iota_gfx_task(void) {
-  render_status_info();
-
-  if (display.dirty) {
-    iota_gfx_flush();
-  }
-
-  if (timer_elapsed(last_flush) > ScreenOffInterval) {
-    iota_gfx_off();
-  }
-}
-#endif
diff --git a/keyboards/orthodox/ssd1306.h b/keyboards/orthodox/ssd1306.h
deleted file mode 100644
index b0c74f987..000000000
--- a/keyboards/orthodox/ssd1306.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef SSD1306_H
-#define SSD1306_H
-
-#include <stdbool.h>
-#include <stdio.h>
-
-bool iota_gfx_init(void);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-#endif
diff --git a/quantum/analog.c b/quantum/analog.c
deleted file mode 100644
index 1ec38df75..000000000
--- a/quantum/analog.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* Copyright 2015 Jack Humbert
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-// Simple analog to digitial conversion
-
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <stdint.h>
-#include "analog.h"
-
-
-static uint8_t aref = (1<<REFS0); // default to AREF = Vcc
-
-
-void analogReference(uint8_t mode)
-{
-	aref = mode & 0xC0;
-}
-
-
-// Arduino compatible pin input
-int16_t analogRead(uint8_t pin)
-{
-#if defined(__AVR_ATmega32U4__)
-	static const uint8_t PROGMEM pin_to_mux[] = {
-		0x00, 0x01, 0x04, 0x05, 0x06, 0x07,
-		0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
-	if (pin >= 12) return 0;
-	return adc_read(pgm_read_byte(pin_to_mux + pin));
-#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-	if (pin >= 8) return 0;
-	return adc_read(pin);
-#else
-	return 0;
-#endif
-}
-
-// Mux input
-int16_t adc_read(uint8_t mux)
-{
-#if defined(__AVR_AT90USB162__)
-	return 0;
-#else
-	uint8_t low;
-
-	ADCSRA = (1<<ADEN) | ADC_PRESCALER;		// enable ADC
-	ADCSRB = (1<<ADHSM) | (mux & 0x20);		// high speed mode
-	ADMUX = aref | (mux & 0x1F);			// configure mux input
-	ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC);	// start the conversion
-	while (ADCSRA & (1<<ADSC)) ;			// wait for result
-	low = ADCL;					// must read LSB first
-	return (ADCH << 8) | low;			// must read MSB only once!
-#endif
-}
-
-
diff --git a/quantum/analog.h b/quantum/analog.h
deleted file mode 100644
index 8d93de7dc..000000000
--- a/quantum/analog.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* Copyright 2015 Jack Humbert
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _analog_h_included__
-#define _analog_h_included__
-
-#include <stdint.h>
-
-void analogReference(uint8_t mode);
-int16_t analogRead(uint8_t pin);
-int16_t adc_read(uint8_t mux);
-
-#define ADC_REF_POWER     (1<<REFS0)
-#define ADC_REF_INTERNAL  ((1<<REFS1) | (1<<REFS0))
-#define ADC_REF_EXTERNAL  (0)
-
-// These prescaler values are for high speed mode, ADHSM = 1
-#if F_CPU == 16000000L
-#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1))
-#elif F_CPU == 8000000L
-#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0))
-#elif F_CPU == 4000000L
-#define ADC_PRESCALER ((1<<ADPS2))
-#elif F_CPU == 2000000L
-#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0))
-#elif F_CPU == 1000000L
-#define ADC_PRESCALER ((1<<ADPS1))
-#else
-#define ADC_PRESCALER ((1<<ADPS0))
-#endif
-
-// some avr-libc versions do not properly define ADHSM
-#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-#if !defined(ADHSM)
-#define ADHSM (7)
-#endif
-#endif
-
-#endif
diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c
deleted file mode 100755
index 2506e3d8e..000000000
--- a/quantum/light_ws2812.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
-* light weight WS2812 lib V2.0b
-*
-* Controls WS2811/WS2812/WS2812B RGB-LEDs
-* Author: Tim (cpldcpu@gmail.com)
-*
-* Jan 18th, 2014  v2.0b Initial Version
-* Nov 29th, 2015  v2.3  Added SK6812RGBW support
-*
-* This program is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "light_ws2812.h"
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "debug.h"
-
-#ifdef RGBW_BB_TWI
-
-// Port for the I2C
-#define I2C_DDR DDRD
-#define I2C_PIN PIND
-#define I2C_PORT PORTD
-
-// Pins to be used in the bit banging
-#define I2C_CLK 0
-#define I2C_DAT 1
-
-#define I2C_DATA_HI()\
-I2C_DDR &= ~ (1 << I2C_DAT);\
-I2C_PORT |= (1 << I2C_DAT);
-#define I2C_DATA_LO()\
-I2C_DDR |= (1 << I2C_DAT);\
-I2C_PORT &= ~ (1 << I2C_DAT);
-
-#define I2C_CLOCK_HI()\
-I2C_DDR &= ~ (1 << I2C_CLK);\
-I2C_PORT |= (1 << I2C_CLK);
-#define I2C_CLOCK_LO()\
-I2C_DDR |= (1 << I2C_CLK);\
-I2C_PORT &= ~ (1 << I2C_CLK);
-
-#define I2C_DELAY 1
-
-void I2C_WriteBit(unsigned char c)
-{
-    if (c > 0)
-    {
-        I2C_DATA_HI();
-    }
-    else
-    {
-        I2C_DATA_LO();
-    }
-
-    I2C_CLOCK_HI();
-    _delay_us(I2C_DELAY);
-
-    I2C_CLOCK_LO();
-    _delay_us(I2C_DELAY);
-
-    if (c > 0)
-    {
-        I2C_DATA_LO();
-    }
-
-    _delay_us(I2C_DELAY);
-}
-
-// Inits bitbanging port, must be called before using the functions below
-//
-void I2C_Init(void)
-{
-    I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
-
-    I2C_CLOCK_HI();
-    I2C_DATA_HI();
-
-    _delay_us(I2C_DELAY);
-}
-
-// Send a START Condition
-//
-void I2C_Start(void)
-{
-    // set both to high at the same time
-    I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
-    _delay_us(I2C_DELAY);
-
-    I2C_DATA_LO();
-    _delay_us(I2C_DELAY);
-
-    I2C_CLOCK_LO();
-    _delay_us(I2C_DELAY);
-}
-
-// Send a STOP Condition
-//
-void I2C_Stop(void)
-{
-    I2C_CLOCK_HI();
-    _delay_us(I2C_DELAY);
-
-    I2C_DATA_HI();
-    _delay_us(I2C_DELAY);
-}
-
-// write a byte to the I2C slave device
-//
-unsigned char I2C_Write(unsigned char c)
-{
-    for (char i = 0; i < 8; i++)
-    {
-        I2C_WriteBit(c & 128);
-
-        c <<= 1;
-    }
-
-    
-    I2C_WriteBit(0);
-    _delay_us(I2C_DELAY);
-    _delay_us(I2C_DELAY);
-  
-    // _delay_us(I2C_DELAY);
-    //return I2C_ReadBit();
-    return 0;
-}
-
-
-#endif
-
-// Setleds for standard RGB
-void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds)
-{
-   // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
-   ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF));
-}
-
-void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask)
-{
-  // ws2812_DDRREG |= pinmask; // Enable DDR
-  // new universal format (DDR)
-  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
-
-  ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask);
-  _delay_us(50);
-}
-
-// Setleds for SK6812RGBW
-void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds)
-{
-
-  #ifdef RGBW_BB_TWI
-    uint8_t sreg_prev, twcr_prev;
-    sreg_prev=SREG;
-    twcr_prev=TWCR;
-    cli();
-    TWCR &= ~(1<<TWEN);
-    I2C_Init();
-    I2C_Start();
-    I2C_Write(0x84);
-    uint16_t datlen = leds<<2;
-    uint8_t curbyte;
-    uint8_t * data = (uint8_t*)ledarray;
-    while (datlen--) {
-      curbyte=*data++;
-      I2C_Write(curbyte);
-    }
-    I2C_Stop();
-    SREG=sreg_prev;
-    TWCR=twcr_prev;
-  #endif
-
-
-  // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
-  // new universal format (DDR)
-  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF);
-
-  ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF));
-
-
-  #ifndef RGBW_BB_TWI
-    _delay_us(80);
-  #endif
-}
-
-void ws2812_sendarray(uint8_t *data,uint16_t datlen)
-{
-  ws2812_sendarray_mask(data,datlen,_BV(RGB_DI_PIN & 0xF));
-}
-
-/*
-  This routine writes an array of bytes with RGB values to the Dataout pin
-  using the fast 800kHz clockless WS2811/2812 protocol.
-*/
-
-// Timing in ns
-#define w_zeropulse   350
-#define w_onepulse    900
-#define w_totalperiod 1250
-
-// Fixed cycles used by the inner loop
-#define w_fixedlow    2
-#define w_fixedhigh   4
-#define w_fixedtotal  8
-
-// Insert NOPs to match the timing, if possible
-#define w_zerocycles    (((F_CPU/1000)*w_zeropulse          )/1000000)
-#define w_onecycles     (((F_CPU/1000)*w_onepulse    +500000)/1000000)
-#define w_totalcycles   (((F_CPU/1000)*w_totalperiod +500000)/1000000)
-
-// w1 - nops between rising edge and falling edge - low
-#define w1 (w_zerocycles-w_fixedlow)
-// w2   nops between fe low and fe high
-#define w2 (w_onecycles-w_fixedhigh-w1)
-// w3   nops to complete loop
-#define w3 (w_totalcycles-w_fixedtotal-w1-w2)
-
-#if w1>0
-  #define w1_nops w1
-#else
-  #define w1_nops  0
-#endif
-
-// The only critical timing parameter is the minimum pulse length of the "0"
-// Warn or throw error if this timing can not be met with current F_CPU settings.
-#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000)
-#if w_lowtime>550
-   #error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
-#elif w_lowtime>450
-   #warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
-   #warning "Please consider a higher clockspeed, if possible"
-#endif
-
-#if w2>0
-#define w2_nops w2
-#else
-#define w2_nops  0
-#endif
-
-#if w3>0
-#define w3_nops w3
-#else
-#define w3_nops  0
-#endif
-
-#define w_nop1  "nop      \n\t"
-#define w_nop2  "rjmp .+0 \n\t"
-#define w_nop4  w_nop2 w_nop2
-#define w_nop8  w_nop4 w_nop4
-#define w_nop16 w_nop8 w_nop8
-
-void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi)
-{
-  uint8_t curbyte,ctr,masklo;
-  uint8_t sreg_prev;
-
-  // masklo  =~maskhi&ws2812_PORTREG;
-  // maskhi |=        ws2812_PORTREG;
-  masklo  =~maskhi&_SFR_IO8((RGB_DI_PIN >> 4) + 2);
-  maskhi |=        _SFR_IO8((RGB_DI_PIN >> 4) + 2);
-  sreg_prev=SREG;
-  cli();
-
-  while (datlen--) {
-    curbyte=(*data++);
-
-    asm volatile(
-    "       ldi   %0,8  \n\t"
-    "loop%=:            \n\t"
-    "       out   %2,%3 \n\t"    //  '1' [01] '0' [01] - re
-#if (w1_nops&1)
-w_nop1
-#endif
-#if (w1_nops&2)
-w_nop2
-#endif
-#if (w1_nops&4)
-w_nop4
-#endif
-#if (w1_nops&8)
-w_nop8
-#endif
-#if (w1_nops&16)
-w_nop16
-#endif
-    "       sbrs  %1,7  \n\t"    //  '1' [03] '0' [02]
-    "       out   %2,%4 \n\t"    //  '1' [--] '0' [03] - fe-low
-    "       lsl   %1    \n\t"    //  '1' [04] '0' [04]
-#if (w2_nops&1)
-  w_nop1
-#endif
-#if (w2_nops&2)
-  w_nop2
-#endif
-#if (w2_nops&4)
-  w_nop4
-#endif
-#if (w2_nops&8)
-  w_nop8
-#endif
-#if (w2_nops&16)
-  w_nop16
-#endif
-    "       out   %2,%4 \n\t"    //  '1' [+1] '0' [+1] - fe-high
-#if (w3_nops&1)
-w_nop1
-#endif
-#if (w3_nops&2)
-w_nop2
-#endif
-#if (w3_nops&4)
-w_nop4
-#endif
-#if (w3_nops&8)
-w_nop8
-#endif
-#if (w3_nops&16)
-w_nop16
-#endif
-
-    "       dec   %0    \n\t"    //  '1' [+2] '0' [+2]
-    "       brne  loop%=\n\t"    //  '1' [+3] '0' [+4]
-    :	"=&d" (ctr)
-    :	"r" (curbyte), "I" (_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r" (maskhi), "r" (masklo)
-    );
-  }
-
-  SREG=sreg_prev;
-}
diff --git a/quantum/light_ws2812.h b/quantum/light_ws2812.h
deleted file mode 100755
index 60924a0fb..000000000
--- a/quantum/light_ws2812.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * light weight WS2812 lib include
- *
- * Version 2.3  - Nev 29th 2015
- * Author: Tim (cpldcpu@gmail.com)
- *
- * Please do not change this file! All configuration is handled in "ws2812_config.h"
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef LIGHT_WS2812_H_
-#define LIGHT_WS2812_H_
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-//#include "ws2812_config.h"
-//#include "i2cmaster.h"
-
-#ifdef RGBW
-  #define LED_TYPE struct cRGBW
-#else
-  #define LED_TYPE struct cRGB
-#endif
-
-
-/*
- *  Structure of the LED array
- *
- * cRGB:     RGB  for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106
- * cRGBW:    RGBW for SK6812RGBW
- */
-
-struct cRGB  { uint8_t g; uint8_t r; uint8_t b; };
-struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;};
-
-
-
-/* User Interface
- *
- * Input:
- *         ledarray:           An array of GRB data describing the LED colors
- *         number_of_leds:     The number of LEDs to write
- *         pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
- *
- * The functions will perform the following actions:
- *         - Set the data-out pin as output
- *         - Send out the LED data
- *         - Wait 50�s to reset the LEDs
- */
-
-void ws2812_setleds     (LED_TYPE *ledarray, uint16_t number_of_leds);
-void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
-void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
-
-/*
- * Old interface / Internal functions
- *
- * The functions take a byte-array and send to the data output as WS2812 bitstream.
- * The length is the number of bytes to send - three per LED.
- */
-
-void ws2812_sendarray     (uint8_t *array,uint16_t length);
-void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
-
-
-/*
- * Internal defines
- */
-#ifndef CONCAT
-#define CONCAT(a, b)            a ## b
-#endif
-#ifndef CONCAT_EXP
-#define CONCAT_EXP(a, b)   CONCAT(a, b)
-#endif
-
-// #define ws2812_PORTREG  CONCAT_EXP(PORT,ws2812_port)
-// #define ws2812_DDRREG   CONCAT_EXP(DDR,ws2812_port)
-
-#endif /* LIGHT_WS2812_H_ */
diff --git a/quantum/rgblight.h b/quantum/rgblight.h
index 92130192c..8fea96a9e 100644
--- a/quantum/rgblight.h
+++ b/quantum/rgblight.h
@@ -61,7 +61,7 @@
 #include <stdint.h>
 #include <stdbool.h>
 #include "eeconfig.h"
-#include "light_ws2812.h"
+#include "ws2812.h"
 
 extern LED_TYPE led[RGBLED_NUM];
 
diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk
index 6773726ee..4af34ba57 100644
--- a/tmk_core/avr.mk
+++ b/tmk_core/avr.mk
@@ -12,7 +12,7 @@ HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature
 EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) 
 BIN =
 
-
+COMMON_VPATH += $(DRIVER_PATH)/avr
 
 COMPILEFLAGS += -funsigned-char
 COMPILEFLAGS += -funsigned-bitfields
-- 
cgit v1.2.3-70-g09d2


From 65c10790d4f7b89bef849ed3896db4ea30b13a40 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Mon, 10 Jul 2017 11:53:18 -0400
Subject: Update README.md

---
 keyboards/handwired/magicforce68/README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/handwired/magicforce68/README.md b/keyboards/handwired/magicforce68/README.md
index 2877169ef..a0de66069 100644
--- a/keyboards/handwired/magicforce68/README.md
+++ b/keyboards/handwired/magicforce68/README.md
@@ -5,7 +5,7 @@ This firmware is for a Magicforce 68 that's had its PCB removed and is handwired
 
 ## Wiring Layout
 
-![Wiring Layout](http://imgur.com/NmTCv5u)
+![Wiring Layout](http://i.imgur.com/NmTCv5u.png)
 
 ## Pinout
 
-- 
cgit v1.2.3-70-g09d2


From 1fdf3c84fe2bb10698bf528a9726aab5af12ca6d Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Mon, 10 Jul 2017 16:51:37 -0400
Subject: Updated minidox rev1 config, and readme. Also updated that_canadian
 keymap to include RGB

---
 keyboards/minidox/keymaps/that_canadian/Makefile |  3 ++
 keyboards/minidox/keymaps/that_canadian/config.h | 37 ++++++++++++++++++++++++
 keyboards/minidox/keymaps/that_canadian/keymap.c |  4 +--
 keyboards/minidox/readme.md                      |  2 +-
 keyboards/minidox/rev1/config.h                  | 11 ++-----
 5 files changed, 45 insertions(+), 12 deletions(-)
 create mode 100644 keyboards/minidox/keymaps/that_canadian/Makefile
 create mode 100644 keyboards/minidox/keymaps/that_canadian/config.h

(limited to 'keyboards')

diff --git a/keyboards/minidox/keymaps/that_canadian/Makefile b/keyboards/minidox/keymaps/that_canadian/Makefile
new file mode 100644
index 000000000..457a3d01d
--- /dev/null
+++ b/keyboards/minidox/keymaps/that_canadian/Makefile
@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/minidox/keymaps/that_canadian/config.h b/keyboards/minidox/keymaps/that_canadian/config.h
new file mode 100644
index 000000000..7a8193e08
--- /dev/null
+++ b/keyboards/minidox/keymaps/that_canadian/config.h
@@ -0,0 +1,37 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define USE_SERIAL
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D7
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 4   // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#endif
\ No newline at end of file
diff --git a/keyboards/minidox/keymaps/that_canadian/keymap.c b/keyboards/minidox/keymaps/that_canadian/keymap.c
index 838f30602..940c388c9 100644
--- a/keyboards/minidox/keymaps/that_canadian/keymap.c
+++ b/keyboards/minidox/keymaps/that_canadian/keymap.c
@@ -113,8 +113,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_ADJUST] =  KEYMAP( \
   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,        KC_F6,   KC_F7,   KC_UP,   KC_F9,   KC_F10, \
-  KC_F11,  KC_F12,  _______, _______, _______,      _______, KC_LEFT, KC_DOWN, KC_RGHT, CALTDEL, \
-  RESET,   _______, _______, _______, _______,      _______, _______, KC_F8, TSKMGR,  _______, \
+  KC_F11,  KC_F12,  _______, RGB_SAI, RGB_SAD,      _______, KC_LEFT, KC_DOWN, KC_RGHT, CALTDEL, \
+  RESET,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD,      RGB_VAI, RGB_VAD, KC_F8, TSKMGR,  _______, \
                     _______, _______, _______,      _______,  _______, _______                    \
 )
 };
diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md
index 37ab84b08..f6227386d 100644
--- a/keyboards/minidox/readme.md
+++ b/keyboards/minidox/readme.md
@@ -3,7 +3,7 @@ ECO
 
 ![MimiDox](http://i.imgur.com/iWb3yO0.jpg)
 
-DESCRIPTION HERE
+A compact version of the ErgoDox
 
 Keyboard Maintainer: That-Canadian
 Hardware Supported: MiniDox PCB rev1 Pro Micro
diff --git a/keyboards/minidox/rev1/config.h b/keyboards/minidox/rev1/config.h
index 4370e7d73..a858a5b90 100644
--- a/keyboards/minidox/rev1/config.h
+++ b/keyboards/minidox/rev1/config.h
@@ -18,7 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef REV1_CONFIG_H
 #define REV1_CONFIG_H
 
-#include "config_common.h"
+#include "../config.h"
 
 #define DEVICE_VER      0x0001
 
@@ -34,12 +34,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define I2C_MASTER_LEFT
 //#define I2C_MASTER_RIGHT
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-
+ 
 #endif
-- 
cgit v1.2.3-70-g09d2


From df502603002bf98292615109d8246bc092942ca4 Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Mon, 10 Jul 2017 16:59:20 -0400
Subject: cleaned up that_canadian keymap comments

---
 keyboards/minidox/keymaps/that_canadian/keymap.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/minidox/keymaps/that_canadian/keymap.c b/keyboards/minidox/keymaps/that_canadian/keymap.c
index 940c388c9..da9905346 100644
--- a/keyboards/minidox/keymaps/that_canadian/keymap.c
+++ b/keyboards/minidox/keymaps/that_canadian/keymap.c
@@ -99,11 +99,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Adjust (Lower + Raise)
  *
  * ,----------------------------------.           ,----------------------------------.
- * |  F1  |  F2  |  F3  |  F4  |  F5  |           |   F6 |  F7  |  F8  |  F9  |  F10 |
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |           |   F6 |  F7  |  Up  |  F9  |  F10 |
  * |------+------+------+------+------|           |------+------+------+------+------|
- * |  F11 |  F12 |      |      |      |           |      |      |      |Taskmg|caltde|
+ * |  F11 |  F12 |      |      |      |           |      | Left | Down |Right |caltde|
  * |------+------+------+------+------|           |------+------+------+------+------|
- * | Reset|      |      |      |      |           |      |      |      |      |      |
+ * | Reset|      |      |      |      |           |      |      |   F8 |Taskmg|      |
  * `----------------------------------'           `----------------------------------'
  *                  ,--------------------.    ,------,-------------.
  *                  |      | LOWER|      |    |      | RAISE|      |
-- 
cgit v1.2.3-70-g09d2


From a4958a532da154b9dd6f6144836a73f9de641f74 Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Mon, 10 Jul 2017 17:12:18 -0400
Subject: Fixed RGB being enabled by default, now it must be turned on at the
 keymap level

---
 keyboards/minidox/keymaps/that_canadian/Makefile | 2 ++
 keyboards/minidox/rules.mk                       | 3 +--
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/minidox/keymaps/that_canadian/Makefile b/keyboards/minidox/keymaps/that_canadian/Makefile
index 457a3d01d..52ef1ad3e 100644
--- a/keyboards/minidox/keymaps/that_canadian/Makefile
+++ b/keyboards/minidox/keymaps/that_canadian/Makefile
@@ -1,3 +1,5 @@
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif
diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk
index a9eee7bf1..539456ae0 100644
--- a/keyboards/minidox/rules.mk
+++ b/keyboards/minidox/rules.mk
@@ -66,8 +66,7 @@ MIDI_ENABLE ?= no            # MIDI controls
 AUDIO_ENABLE ?= no           # Audio output on port C6
 UNICODE_ENABLE ?= no         # Unicode
 BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SUBPROJECT_rev1 ?= yes
+RGBLIGHT_ENABLE ?= no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 USE_I2C ?= no
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
-- 
cgit v1.2.3-70-g09d2


From 55fcac4639e0020fe65f7289a58bc1416cf49de7 Mon Sep 17 00:00:00 2001
From: That-Canadian <Poole.Chris.11@gmail.com>
Date: Mon, 10 Jul 2017 20:15:08 -0400
Subject: Adds Minidox Keyboard (#1487)

* merge

* line ending stuff

* Added MiniDox keyboard folder / configs / and some keymaps

* Updated minidox rev1 config, and readme. Also updated that_canadian keymap to include RGB

* cleaned up that_canadian keymap comments

* Fixed RGB being enabled by default, now it must be turned on at the keymap level
---
 keyboards/minidox/Makefile                       |   5 +
 keyboards/minidox/config.h                       |  74 +++++
 keyboards/minidox/i2c.c                          | 162 ++++++++++
 keyboards/minidox/i2c.h                          |  31 ++
 keyboards/minidox/keymaps/default/keymap.c       | 168 +++++++++++
 keyboards/minidox/keymaps/that_canadian/Makefile |   5 +
 keyboards/minidox/keymaps/that_canadian/config.h |  37 +++
 keyboards/minidox/keymaps/that_canadian/keymap.c | 172 +++++++++++
 keyboards/minidox/matrix.c                       | 318 ++++++++++++++++++++
 keyboards/minidox/minidox.c                      |   1 +
 keyboards/minidox/minidox.h                      |  10 +
 keyboards/minidox/pro_micro.h                    | 362 +++++++++++++++++++++++
 keyboards/minidox/readme.md                      |  15 +
 keyboards/minidox/rev1/Makefile                  |   3 +
 keyboards/minidox/rev1/config.h                  |  38 +++
 keyboards/minidox/rev1/rev1.c                    |   1 +
 keyboards/minidox/rev1/rev1.h                    |  28 ++
 keyboards/minidox/rev1/rules.mk                  |   5 +
 keyboards/minidox/rules.mk                       |  74 +++++
 keyboards/minidox/serial.c                       | 228 ++++++++++++++
 keyboards/minidox/serial.h                       |  26 ++
 keyboards/minidox/split_util.c                   |  80 +++++
 keyboards/minidox/split_util.h                   |  22 ++
 23 files changed, 1865 insertions(+)
 create mode 100644 keyboards/minidox/Makefile
 create mode 100644 keyboards/minidox/config.h
 create mode 100644 keyboards/minidox/i2c.c
 create mode 100644 keyboards/minidox/i2c.h
 create mode 100644 keyboards/minidox/keymaps/default/keymap.c
 create mode 100644 keyboards/minidox/keymaps/that_canadian/Makefile
 create mode 100644 keyboards/minidox/keymaps/that_canadian/config.h
 create mode 100644 keyboards/minidox/keymaps/that_canadian/keymap.c
 create mode 100644 keyboards/minidox/matrix.c
 create mode 100644 keyboards/minidox/minidox.c
 create mode 100644 keyboards/minidox/minidox.h
 create mode 100644 keyboards/minidox/pro_micro.h
 create mode 100644 keyboards/minidox/readme.md
 create mode 100644 keyboards/minidox/rev1/Makefile
 create mode 100644 keyboards/minidox/rev1/config.h
 create mode 100644 keyboards/minidox/rev1/rev1.c
 create mode 100644 keyboards/minidox/rev1/rev1.h
 create mode 100644 keyboards/minidox/rev1/rules.mk
 create mode 100644 keyboards/minidox/rules.mk
 create mode 100644 keyboards/minidox/serial.c
 create mode 100644 keyboards/minidox/serial.h
 create mode 100644 keyboards/minidox/split_util.c
 create mode 100644 keyboards/minidox/split_util.h

(limited to 'keyboards')

diff --git a/keyboards/minidox/Makefile b/keyboards/minidox/Makefile
new file mode 100644
index 000000000..30b43c4ea
--- /dev/null
+++ b/keyboards/minidox/Makefile
@@ -0,0 +1,5 @@
+SUBPROJECT_DEFAULT = rev1
+
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/minidox/config.h b/keyboards/minidox/config.h
new file mode 100644
index 000000000..306a486cb
--- /dev/null
+++ b/keyboards/minidox/config.h
@@ -0,0 +1,74 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define MANUFACTURER    That-Canadian
+#define PRODUCT         MiniDox
+#define DESCRIPTION     A compact version of the Ergo Dox
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1/config.h"
+#endif
+
+#endif
diff --git a/keyboards/minidox/i2c.c b/keyboards/minidox/i2c.c
new file mode 100644
index 000000000..084c890c4
--- /dev/null
+++ b/keyboards/minidox/i2c.c
@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif
diff --git a/keyboards/minidox/i2c.h b/keyboards/minidox/i2c.h
new file mode 100644
index 000000000..08ce4b009
--- /dev/null
+++ b/keyboards/minidox/i2c.h
@@ -0,0 +1,31 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  100000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+#endif
diff --git a/keyboards/minidox/keymaps/default/keymap.c b/keyboards/minidox/keymaps/default/keymap.c
new file mode 100644
index 000000000..3fa20e1eb
--- /dev/null
+++ b/keyboards/minidox/keymaps/default/keymap.c
@@ -0,0 +1,168 @@
+#include "minidox.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   Q  |   W  |   E  |   R  |   T  |           |   Y  |   U  |   I  |   O  |   P  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |   A  |   S  |   D  |   F  |   G  |           |   H  |   J  |   K  |   L  |   ;  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |   Z  |   X  |   C  |   V  |   B  |           |   N  |   M  |   ,  |   .  |   /  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  | Ctrl | LOWER|      |    |      | RAISE| Shift|
+ *                  `-------------| Space|    |BckSpc|------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    \
+  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, \
+  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,         KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, \
+                    KC_LCTL, LOWER, KC_SPC,         KC_BSPC, RAISE, OSM(MOD_LSFT)                 \
+),
+
+/* Raise
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |           |   6  |   7  |   8  |   9  |   0  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Tab | Left | Down |  Up  | Right|           |      |   -  |   =  |   [  |   ]  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Ctrl|   `  |  GUI |  Alt |      |           |      |      |      |   \  |   '  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|      |
+ *                  `-------------|      |    |      |------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,         KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    \
+  KC_TAB,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT,      _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, \
+  KC_LCTL, KC_GRV,  KC_LGUI, KC_LALT, _______,      _______, _______, _______, KC_BSLS,  KC_QUOT, \
+                    _______, _______, _______,      _______, _______, _______                    \
+),
+
+/* Lower
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   !  |   @  |   #  |   $  |   %  |           |   ^  |   &  |   *  |   (  |   )  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Esc |      |      |      |      |           |      |   _  |   +  |   {  |   }  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Caps|   ~  |      |      |      |           |      |      |      |   |  |   "  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|  Del |
+ *                  `-------------|      |    | Enter|------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \
+  KC_ESC,  _______, _______, _______, _______,      _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \
+  KC_CAPS, KC_TILD, _______, _______, _______,      _______, _______, _______, KC_PIPE,  KC_DQT, \
+                    _______, _______, _______,      KC_ENT,  _______, KC_DEL                    \
+),
+
+/* Adjust (Lower + Raise)
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |           |   F6 |  F7  |  F8  |  F9  |  F10 |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  F11 |  F12 |      |      |      |           |      |      |      |Taskmg|caltde|
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * | Reset|      |      |      |      |           |      |      |      |      |      |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|      |
+ *                  `-------------|      |    |      |------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_ADJUST] =  KEYMAP( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,        KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10, \
+  KC_F11,  KC_F12,  _______, _______, _______,      _______, _______, _______, TSKMGR, CALTDEL, \
+  RESET,   _______, _______, _______, _______,      _______, _______, _______, _______,  _______, \
+                    _______, _______, _______,      _______,  _______, _______                    \
+)
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/minidox/keymaps/that_canadian/Makefile b/keyboards/minidox/keymaps/that_canadian/Makefile
new file mode 100644
index 000000000..52ef1ad3e
--- /dev/null
+++ b/keyboards/minidox/keymaps/that_canadian/Makefile
@@ -0,0 +1,5 @@
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/minidox/keymaps/that_canadian/config.h b/keyboards/minidox/keymaps/that_canadian/config.h
new file mode 100644
index 000000000..7a8193e08
--- /dev/null
+++ b/keyboards/minidox/keymaps/that_canadian/config.h
@@ -0,0 +1,37 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define USE_SERIAL
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D7
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 4   // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#endif
\ No newline at end of file
diff --git a/keyboards/minidox/keymaps/that_canadian/keymap.c b/keyboards/minidox/keymaps/that_canadian/keymap.c
new file mode 100644
index 000000000..da9905346
--- /dev/null
+++ b/keyboards/minidox/keymaps/that_canadian/keymap.c
@@ -0,0 +1,172 @@
+#include "minidox.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   Q  |   W  |   E  |   R  |   T  |           |   Y  |   U  |   I  |   O  |   P  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |   A  |   S  |   D  |   F  |   G  |           |   H  |   J  |   K  |   L  |   ;  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |   Z  |   X  |   C  |   V  |   B  |           |   N  |   M  |   ,  |   .  |   /  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  | Ctrl | LOWER|      |    |      | RAISE| Shift|
+ *                  `-------------| Space|    |BckSpc|------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    \
+  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, \
+  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,         KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, \
+                    KC_LCTL, LOWER, KC_SPC,         KC_BSPC, RAISE, OSM(MOD_LSFT)                 \
+),
+
+/* Raise
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |           |   6  |   7  |   8  |   9  |   0  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Tab | Left | Down |  Up  | Right|           |      |   -  |   =  |   [  |   ]  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Ctrl|   `  |  GUI |  Alt |      |           |      |      |      |   \  |   '  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|      |
+ *                  `-------------|      |    |      |------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,         KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    \
+  KC_TAB,    KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT,      _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, \
+  KC_LCTL, KC_GRV,  KC_LGUI, KC_LALT, _______,      _______, _______, _______, KC_BSLS,  KC_QUOT, \
+                    _______, _______, _______,      _______, _______, _______                    \
+),
+
+/* Lower
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |   !  |   @  |   #  |   $  |   %  |           |   ^  |   &  |   *  |   (  |   )  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Esc |      |      |      |      |           |      |   _  |   +  |   {  |   }  |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  Caps|   ~  |      |      |      |           |      |      |      |   |  |   "  |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|  Del |
+ *                  `-------------|      |    | Enter|------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \
+  KC_ESC,  _______, _______, _______, _______,      _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \
+  KC_CAPS, KC_TILD, _______, _______, _______,      _______, _______, _______, KC_PIPE,  KC_DQT, \
+                    _______, _______, _______,      KC_ENT,  _______, KC_DEL                    \
+),
+
+/* Adjust (Lower + Raise)
+ *
+ * ,----------------------------------.           ,----------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |           |   F6 |  F7  |  Up  |  F9  |  F10 |
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * |  F11 |  F12 |      |      |      |           |      | Left | Down |Right |caltde|
+ * |------+------+------+------+------|           |------+------+------+------+------|
+ * | Reset|      |      |      |      |           |      |      |   F8 |Taskmg|      |
+ * `----------------------------------'           `----------------------------------'
+ *                  ,--------------------.    ,------,-------------.
+ *                  |      | LOWER|      |    |      | RAISE|      |
+ *                  `-------------|      |    |      |------+------.
+ *                                |      |    |      |
+ *                                `------'    `------'
+ */
+[_ADJUST] =  KEYMAP( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,        KC_F6,   KC_F7,   KC_UP,   KC_F9,   KC_F10, \
+  KC_F11,  KC_F12,  _______, RGB_SAI, RGB_SAD,      _______, KC_LEFT, KC_DOWN, KC_RGHT, CALTDEL, \
+  RESET,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD,      RGB_VAI, RGB_VAD, KC_F8, TSKMGR,  _______, \
+                    _______, _______, _______,      _______,  _______, _______                    \
+)
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+#endif
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
\ No newline at end of file
diff --git a/keyboards/minidox/matrix.c b/keyboards/minidox/matrix.c
new file mode 100644
index 000000000..138969004
--- /dev/null
+++ b/keyboards/minidox/matrix.c
@@ -0,0 +1,318 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCE
+#  define DEBOUNCE	5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void)
+{
+    // Right hand is stored after the left in the matirx so, we need to offset it
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i+offset] != cols) {
+            matrix_debouncing[i+offset] = cols;
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+        }
+    }
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        int i;
+        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+        }
+        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    int ret = _matrix_scan();
+
+
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+
+    matrix_scan_quantum();
+
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2);
+
+#ifdef USE_I2C
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        /* i2c_slave_buffer[i] = matrix[offset+i]; */
+        i2c_slave_buffer[i] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void  init_cols(void)
+{
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
+        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    }
+}
+
+static matrix_row_t read_cols(void)
+{
+    matrix_row_t result = 0;
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+    }
+    return result;
+}
+
+static void unselect_rows(void)
+{
+    for(int x = 0; x < ROWS_PER_HAND; x++) {
+        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
+        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    }
+}
+
+static void select_row(uint8_t row)
+{
+    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
+    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}
diff --git a/keyboards/minidox/minidox.c b/keyboards/minidox/minidox.c
new file mode 100644
index 000000000..b4bffbb3e
--- /dev/null
+++ b/keyboards/minidox/minidox.c
@@ -0,0 +1 @@
+#include "minidox.h"
\ No newline at end of file
diff --git a/keyboards/minidox/minidox.h b/keyboards/minidox/minidox.h
new file mode 100644
index 000000000..479c7aec7
--- /dev/null
+++ b/keyboards/minidox/minidox.h
@@ -0,0 +1,10 @@
+#ifndef MINIDOX_H
+#define MINIDOX_H
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"
+
+#endif
\ No newline at end of file
diff --git a/keyboards/minidox/pro_micro.h b/keyboards/minidox/pro_micro.h
new file mode 100644
index 000000000..f9e7ed75d
--- /dev/null
+++ b/keyboards/minidox/pro_micro.h
@@ -0,0 +1,362 @@
+/*
+  pins_arduino.h - Pin definition functions for Arduino
+  Part of Arduino - http://www.arduino.cc/
+
+  Copyright (c) 2007 David A. Mellis
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General
+  Public License along with this library; if not, write to the
+  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA  02111-1307  USA
+
+  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+// Workaround for wrong definitions in "iom32u4.h".
+// This should be fixed in the AVR toolchain.
+#undef UHCON
+#undef UHINT
+#undef UHIEN
+#undef UHADDR
+#undef UHFNUM
+#undef UHFNUML
+#undef UHFNUMH
+#undef UHFLEN
+#undef UPINRQX
+#undef UPINTX
+#undef UPNUM
+#undef UPRST
+#undef UPCONX
+#undef UPCFG0X
+#undef UPCFG1X
+#undef UPSTAX
+#undef UPCFG2X
+#undef UPIENX
+#undef UPDATX
+#undef TCCR2A
+#undef WGM20
+#undef WGM21
+#undef COM2B0
+#undef COM2B1
+#undef COM2A0
+#undef COM2A1
+#undef TCCR2B
+#undef CS20
+#undef CS21
+#undef CS22
+#undef WGM22
+#undef FOC2B
+#undef FOC2A
+#undef TCNT2
+#undef TCNT2_0
+#undef TCNT2_1
+#undef TCNT2_2
+#undef TCNT2_3
+#undef TCNT2_4
+#undef TCNT2_5
+#undef TCNT2_6
+#undef TCNT2_7
+#undef OCR2A
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+#undef OCR2B
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+
+#define NUM_DIGITAL_PINS  30
+#define NUM_ANALOG_INPUTS 12
+
+#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
+#define TXLED0          PORTD |= (1<<5)
+#define TXLED1          PORTD &= ~(1<<5)
+#define RXLED0          PORTB |= (1<<0)
+#define RXLED1          PORTB &= ~(1<<0)
+
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 3;
+#define LED_BUILTIN 13
+
+// Map SPI port to 'new' pins D14..D17
+static const uint8_t SS   = 17;
+static const uint8_t MOSI = 16;
+static const uint8_t MISO = 14;
+static const uint8_t SCK  = 15;
+
+// Mapping of analog pins as digital I/O
+// A6-A11 share with digital pins
+static const uint8_t ADC0 = 18;
+static const uint8_t ADC1 = 19;
+static const uint8_t ADC2 = 20;
+static const uint8_t ADC3 = 21;
+static const uint8_t ADC4 = 22;
+static const uint8_t ADC5 = 23;
+static const uint8_t ADC6 = 24;   // D4
+static const uint8_t ADC7 = 25;   // D6
+static const uint8_t ADC8 = 26;   // D8
+static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC10 = 28;  // D10
+static const uint8_t ADC11 = 29;  // D12
+
+#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICRbit(p) 0
+#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
+#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
+
+//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
+extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
+#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
+
+#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
+
+#ifdef ARDUINO_MAIN
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM).  Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
+//
+// D0               PD2                 RXD1/INT2
+// D1               PD3                 TXD1/INT3
+// D2               PD1     SDA         SDA/INT1
+// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
+// D4       A6      PD4                 ADC8
+// D5#              PC6     ???         OC3A/#OC4A
+// D6#      A7      PD7     FastPWM     #OC4D/ADC10
+// D7               PE6                 INT6/AIN0
+//
+// D8       A8      PB4                 ADC11/PCINT4
+// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
+// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
+// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
+// D12      A11     PD6                 T1/#OC4D/ADC9
+// D13#             PC7     PWM10       CLK0/OC4A
+//
+// A0       D18     PF7                 ADC7
+// A1       D19     PF6                 ADC6
+// A2       D20     PF5                 ADC5
+// A3       D21     PF4                 ADC4
+// A4       D22     PF1                 ADC1
+// A5       D23     PF0                 ADC0
+//
+// New pins D14..D17 to map SPI port to digital pins
+//
+// MISO     D14     PB3                 MISO,PCINT3
+// SCK      D15     PB1                 SCK,PCINT1
+// MOSI     D16     PB2                 MOSI,PCINT2
+// SS       D17     PB0                 RXLED,SS/PCINT0
+//
+// Connected LEDs on board for TX and RX
+// TXLED    D24     PD5                 XCK1
+// RXLED    D17     PB0
+// HWB              PE2                 HWB
+
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &DDRB,
+    (uint16_t) &DDRC,
+    (uint16_t) &DDRD,
+    (uint16_t) &DDRE,
+    (uint16_t) &DDRF,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PORTB,
+    (uint16_t) &PORTC,
+    (uint16_t) &PORTD,
+    (uint16_t) &PORTE,
+    (uint16_t) &PORTF,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+    NOT_A_PORT,
+    NOT_A_PORT,
+    (uint16_t) &PINB,
+    (uint16_t) &PINC,
+    (uint16_t) &PIND,
+    (uint16_t) &PINE,
+    (uint16_t) &PINF,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+    PD, // D0 - PD2
+    PD, // D1 - PD3
+    PD, // D2 - PD1
+    PD, // D3 - PD0
+    PD, // D4 - PD4
+    PC, // D5 - PC6
+    PD, // D6 - PD7
+    PE, // D7 - PE6
+
+    PB, // D8 - PB4
+    PB, // D9 - PB5
+    PB, // D10 - PB6
+    PB, // D11 - PB7
+    PD, // D12 - PD6
+    PC, // D13 - PC7
+
+    PB, // D14 - MISO - PB3
+    PB, // D15 - SCK - PB1
+    PB, // D16 - MOSI - PB2
+    PB, // D17 - SS - PB0
+
+    PF, // D18 - A0 - PF7
+    PF, // D19 - A1 - PF6
+    PF, // D20 - A2 - PF5
+    PF, // D21 - A3 - PF4
+    PF, // D22 - A4 - PF1
+    PF, // D23 - A5 - PF0
+
+    PD, // D24 - PD5
+    PD, // D25 / D6 - A7 - PD7
+    PB, // D26 / D8 - A8 - PB4
+    PB, // D27 / D9 - A9 - PB5
+    PB, // D28 / D10 - A10 - PB6
+    PD, // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+    _BV(2), // D0 - PD2
+    _BV(3), // D1 - PD3
+    _BV(1), // D2 - PD1
+    _BV(0), // D3 - PD0
+    _BV(4), // D4 - PD4
+    _BV(6), // D5 - PC6
+    _BV(7), // D6 - PD7
+    _BV(6), // D7 - PE6
+
+    _BV(4), // D8 - PB4
+    _BV(5), // D9 - PB5
+    _BV(6), // D10 - PB6
+    _BV(7), // D11 - PB7
+    _BV(6), // D12 - PD6
+    _BV(7), // D13 - PC7
+
+    _BV(3), // D14 - MISO - PB3
+    _BV(1), // D15 - SCK - PB1
+    _BV(2), // D16 - MOSI - PB2
+    _BV(0), // D17 - SS - PB0
+
+    _BV(7), // D18 - A0 - PF7
+    _BV(6), // D19 - A1 - PF6
+    _BV(5), // D20 - A2 - PF5
+    _BV(4), // D21 - A3 - PF4
+    _BV(1), // D22 - A4 - PF1
+    _BV(0), // D23 - A5 - PF0
+
+    _BV(5), // D24 - PD5
+    _BV(7), // D25 / D6 - A7 - PD7
+    _BV(4), // D26 / D8 - A8 - PB4
+    _BV(5), // D27 / D9 - A9 - PB5
+    _BV(6), // D28 / D10 - A10 - PB6
+    _BV(6), // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    TIMER0B,        /* 3 */
+    NOT_ON_TIMER,
+    TIMER3A,        /* 5 */
+    TIMER4D,        /* 6 */
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    TIMER1A,        /* 9 */
+    TIMER1B,        /* 10 */
+    TIMER0A,        /* 11 */
+
+    NOT_ON_TIMER,
+    TIMER4A,        /* 13 */
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+    NOT_ON_TIMER,
+};
+
+const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
+    7,  // A0               PF7                 ADC7
+    6,  // A1               PF6                 ADC6
+    5,  // A2               PF5                 ADC5
+    4,  // A3               PF4                 ADC4
+    1,  // A4               PF1                 ADC1
+    0,  // A5               PF0                 ADC0
+    8,  // A6       D4      PD4                 ADC8
+    10, // A7       D6      PD7                 ADC10
+    11, // A8       D8      PB4                 ADC11
+    12, // A9       D9      PB5                 ADC12
+    13, // A10      D10     PB6                 ADC13
+    9   // A11      D12     PD6                 ADC9
+};
+
+#endif /* ARDUINO_MAIN */
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR        Serial
+#define SERIAL_PORT_USBVIRTUAL     Serial
+#define SERIAL_PORT_HARDWARE       Serial1
+#define SERIAL_PORT_HARDWARE_OPEN  Serial1
+
+#endif /* Pins_Arduino_h */
diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md
new file mode 100644
index 000000000..f6227386d
--- /dev/null
+++ b/keyboards/minidox/readme.md
@@ -0,0 +1,15 @@
+ECO
+===
+
+![MimiDox](http://i.imgur.com/iWb3yO0.jpg)
+
+A compact version of the ErgoDox
+
+Keyboard Maintainer: That-Canadian
+Hardware Supported: MiniDox PCB rev1 Pro Micro
+
+Make example for this keyboard (after setting up your build environment):
+
+    make minidox-rev1-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/minidox/rev1/Makefile b/keyboards/minidox/rev1/Makefile
new file mode 100644
index 000000000..4e2a6f00f
--- /dev/null
+++ b/keyboards/minidox/rev1/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/minidox/rev1/config.h b/keyboards/minidox/rev1/config.h
new file mode 100644
index 000000000..a858a5b90
--- /dev/null
+++ b/keyboards/minidox/rev1/config.h
@@ -0,0 +1,38 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include "../config.h"
+
+#define DEVICE_VER      0x0001
+
+// wiring of each half
+#define MATRIX_ROW_PINS { B2, B6, B4, B5 }
+#define MATRIX_COL_PINS { F4, D3, D2, D1, D4 }
+
+#define CATERINA_BOOTLOADER
+
+#define USE_SERIAL
+
+// #define EE_HANDS
+
+#define I2C_MASTER_LEFT
+//#define I2C_MASTER_RIGHT
+ 
+#endif
diff --git a/keyboards/minidox/rev1/rev1.c b/keyboards/minidox/rev1/rev1.c
new file mode 100644
index 000000000..72b473933
--- /dev/null
+++ b/keyboards/minidox/rev1/rev1.c
@@ -0,0 +1 @@
+#include "minidox.h"
diff --git a/keyboards/minidox/rev1/rev1.h b/keyboards/minidox/rev1/rev1.h
new file mode 100644
index 000000000..379dbf64a
--- /dev/null
+++ b/keyboards/minidox/rev1/rev1.h
@@ -0,0 +1,28 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "../minidox.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+//void promicro_bootloader_jmp(bool program);
+
+#define KEYMAP( \
+	k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, \
+	k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, \
+	k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, \
+	          k33, k34, k35, k75, k74, k73            \
+	) \
+	{ \
+		{ k01, k02, k03, k04, k05 }, \
+		{ k11, k12, k13, k14, k15 }, \
+		{ k21, k22, k23, k24, k25 }, \
+		{ KC_NO, KC_NO, k33, k34, k35 }, \
+		{ k41, k42, k43, k44, k45 }, \
+		{ k51, k52, k53, k54, k55 }, \
+		{ k61, k62, k63, k64, k65 }, \
+		{ KC_NO, KC_NO, k73, k74, k75 } \
+	}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/minidox/rev1/rules.mk b/keyboards/minidox/rev1/rules.mk
new file mode 100644
index 000000000..a0825b4ef
--- /dev/null
+++ b/keyboards/minidox/rev1/rules.mk
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk
new file mode 100644
index 000000000..539456ae0
--- /dev/null
+++ b/keyboards/minidox/rules.mk
@@ -0,0 +1,74 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= no       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+USE_I2C ?= no
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
diff --git a/keyboards/minidox/serial.c b/keyboards/minidox/serial.c
new file mode 100644
index 000000000..6faed09ce
--- /dev/null
+++ b/keyboards/minidox/serial.c
@@ -0,0 +1,228 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifdef USE_SERIAL
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < 8; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 8;
+  serial_output();
+  while( b-- ) {
+    if(data & (1 << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += serial_master_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  uint8_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif
diff --git a/keyboards/minidox/serial.h b/keyboards/minidox/serial.h
new file mode 100644
index 000000000..15fe4db7b
--- /dev/null
+++ b/keyboards/minidox/serial.h
@@ -0,0 +1,26 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif
diff --git a/keyboards/minidox/split_util.c b/keyboards/minidox/split_util.c
new file mode 100644
index 000000000..461921798
--- /dev/null
+++ b/keyboards/minidox/split_util.c
@@ -0,0 +1,80 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    #ifdef I2C_MASTER_RIGHT
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        keyboard_slave_loop();
+    }
+}
diff --git a/keyboards/minidox/split_util.h b/keyboards/minidox/split_util.h
new file mode 100644
index 000000000..6b896679c
--- /dev/null
+++ b/keyboards/minidox/split_util.h
@@ -0,0 +1,22 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+
+#ifdef EE_HANDS
+	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
+	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
+#endif
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+#endif
-- 
cgit v1.2.3-70-g09d2


From 886af3250722f0aac2a8d37771ef8fe6b937f4cb Mon Sep 17 00:00:00 2001
From: Maarten Dekkers <maartenn2001@gmail.com>
Date: Tue, 11 Jul 2017 18:53:41 +0200
Subject: Updates maartenwut's keymap (#1489)

* Updated keymap

* Added backlight breathing to fix compile error
---
 keyboards/tada68/keymaps/maartenwut/config.h |  3 ++
 keyboards/tada68/keymaps/maartenwut/keymap.c | 81 +++++++++++++++++++++++-----
 2 files changed, 70 insertions(+), 14 deletions(-)
 create mode 100755 keyboards/tada68/keymaps/maartenwut/config.h

(limited to 'keyboards')

diff --git a/keyboards/tada68/keymaps/maartenwut/config.h b/keyboards/tada68/keymaps/maartenwut/config.h
new file mode 100755
index 000000000..7d81548b7
--- /dev/null
+++ b/keyboards/tada68/keymaps/maartenwut/config.h
@@ -0,0 +1,3 @@
+#include "../../config.h"
+
+#define BACKLIGHT_BREATHING
\ No newline at end of file
diff --git a/keyboards/tada68/keymaps/maartenwut/keymap.c b/keyboards/tada68/keymaps/maartenwut/keymap.c
index ce3800c49..d1e63a6b3 100755
--- a/keyboards/tada68/keymaps/maartenwut/keymap.c
+++ b/keyboards/tada68/keymaps/maartenwut/keymap.c
@@ -5,10 +5,11 @@
 #include "command.h"
 
 #define _MA 0
-#define _FL 1
-#define _AR 2
-#define _LO 3
-#define _UL 4
+#define _GA 1
+#define _FL 2
+#define _AR 3
+#define _LO 4
+#define _UL 5
 
 #define TRNS KC_TRNS
 #define trigger_time 400
@@ -29,6 +30,15 @@
 #define LSHIFT OSM(MOD_LSFT)
 #define SPACE LT(_AR, KC_SPC)
 
+#define MACRO_BREATH_TOGGLE             13
+#define MACRO_BREATH_SPEED_INC          14
+#define MACRO_BREATH_SPEED_DEC          15
+#define MACRO_BREATH_DEFAULT            16
+#define M_BRTOG             M(MACRO_BREATH_TOGGLE)
+#define M_BSPDU             M(MACRO_BREATH_SPEED_INC)
+#define M_BSPDD             M(MACRO_BREATH_SPEED_DEC)
+#define M_BDFLT             M(MACRO_BREATH_DEFAULT)
+
 static uint16_t key_timer;
 
 enum emoticons {
@@ -57,28 +67,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_CAPS,	KC_A, 		KC_S,   	KC_D, 		KC_F, 		KC_G, 		KC_H, 		KC_J, 		KC_K,  		KC_L,  		KC_SCLN, 	KC_QUOT,  				KC_ENT,		KC_PGUP, \
   LSHIFT, 	END_HOME,	KC_Z, 		KC_X,   	KC_C, 		KC_V, 		KC_B, 		KC_N, 		KC_M, 		KC_COMM, 	KC_DOT,		KC_SLSH, 	KC_RSFT,    KC_UP,		KC_PGDN, \
   KC_LCTL, 	KC_LGUI, 	KC_LALT,							SPACE,											KC_RALT,	KC_RCTRL, 	MO(_FL),	KC_LEFT, 	KC_DOWN, 	KC_RGHT),
-
+  
   /* Keymap _FL: Function Layer
    * ,----------------------------------------------------------------.
-   * |~` | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|       |Prsc|
+   * |~` | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Reset  |Prsc|
    * |----------------------------------------------------------------|
    * |     |MbL|MsU|MbR|   |   |   |   |   |   |   |   |   |     |_LO |
    * |----------------------------------------------------------------|
-   * |      |MsL|MsD|MsR|   |   |   |   |   |   |   |   |        |Hme |
+   * |      |MsL|MsD|MsR|   |_GA|   |   |   |   |   |   |        |Hme |
    * |----------------------------------------------------------------|
-   * |    |   |   |   |   |   |   |   |   |VoU|VoD|Mut|      |MwU|End |
+   * |    |   |BL-|BL+|BL |BR-|BR+|BR |   |VoU|VoD|Mut|      |MwU|End |
    * |----------------------------------------------------------------|
    * |    |    |    |                       |   |   |    |MwL|MwD|MwR |  
    * `----------------------------------------------------------------'
    */
 [_FL] = KEYMAP_ANSI(
-  KC_GRV,	KC_F1,		KC_F2,  	KC_F3,  	KC_F4,  	KC_F5,		KC_F6,		KC_F7, 		KC_F8,		KC_F9,		KC_F10,  	KC_F11,		KC_F12,		TRNS,		KC_PSCR, \
+  KC_GRV,	KC_F1,		KC_F2,  	KC_F3,  	KC_F4,  	KC_F5,		KC_F6,		KC_F7, 		KC_F8,		KC_F9,		KC_F10,  	KC_F11,		KC_F12,		RESET,		KC_PSCR, \
   TRNS, 	KC_BTN1,	KC_MS_U,  	KC_BTN2, 	TRNS, 		TRNS, 		TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		TRNS,		TO(_LO), \
-  TRNS, 	KC_MS_L,	KC_MS_D, 	KC_MS_R,	TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,					TRNS,		KC_HOME, \
-  TRNS, 	TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		KC_VOLD,	KC_VOLU,	KC_MUTE,	TRNS,		KC_WH_U,	KC_END, \
+  TRNS, 	KC_MS_L,	KC_MS_D, 	KC_MS_R,	TRNS,		TG(_GA),		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,		TRNS,					TRNS,		KC_HOME, \
+  TRNS, 	TRNS,		BL_DEC,		BL_INC,		BL_TOGG, 	M_BSPDD, 	M_BSPDU, 	M_BRTOG,	TRNS,		KC_VOLD,	KC_VOLU,	KC_MUTE,	TRNS,		KC_WH_U,	KC_END, \
   TRNS, 	TRNS, 		TRNS,								TRNS,											TRNS,		TRNS,		TRNS,   	KC_WH_L,	KC_WH_D, 	KC_WH_R),
 
-  /* Keymap _UL: Unlock layer
+  /* Keymap _AR: Arrow layer
    * ,----------------------------------------------------------------.
    * |   |   |   |   |   |   |   |   |   |   |   |   |   |       |    |
    * |----------------------------------------------------------------|
@@ -95,9 +105,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS,		TRNS, \
   LENNY,	TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,  		TRNS,  		TRNS, 		TRNS,		TRNS,		TRNS,		TRNS, \
   DWNHRT,	TRNS, 		TRNS,   	TRNS, 		TRNS, 		TRNS, 		KC_LEFT, 	KC_DOWN, 	KC_UP,  	KC_RGHT,  	TRNS, 		TRNS, 	 				TRNS,		TRNS, \
-  SHRUG, 	TRNS,   	TRNS,		TRNS,		TRNS,		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS, 		TRNS,   	TRNS,		TRNS, \
+  SHRUG, 	TRNS,   	TRNS,		TRNS,		TRNS,		TRNS,	 	TRNS, 		TRNS, 		TRNS, 		TRNS, 		TRNS,		TRNS, 		TRNS,   	TRNS,		TRNS, \
   TRNS, 	TRNS, 		TRNS,								TRNS,											TRNS,		TRNS, 		TRNS,		TRNS, 		TRNS, 		TRNS),
 
+  /* Keymap _GA: Game layer
+   * ,----------------------------------------------------------------.
+   * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |P/P |
+   * |----------------------------------------------------------------| 
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |Del |
+   * |----------------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |----------------------------------------------------------------|
+   * |Shft|End|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+   * |----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |        Space          |Alt|Ctrl| FN|Lef|Dow|Rig |
+   * `----------------------------------------------------------------'
+   */
+[_GA] = KEYMAP_ANSI(
+  KC_ESC,	T1, 		T2, 		T3, 		T4, 		T5, 		T6, 		T7, 		T8, 		T9, 		T10, 		T11, 		T12,		KC_BSPC,	KC_MPLY, \
+  KC_TAB,	KC_Q, 		KC_W, 		KC_E, 		KC_R, 		KC_T, 		KC_Y, 		KC_U, 		KC_I,  		KC_O,  		KC_P, 		KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_DEL, \
+  KC_CAPS,	KC_A, 		KC_S,   	KC_D, 		KC_F, 		KC_G, 		KC_H, 		KC_J, 		KC_K,  		KC_L,  		KC_SCLN, 	KC_QUOT,  				KC_ENT,		KC_PGUP, \
+  KC_LSFT, 	END_HOME,	KC_Z, 		KC_X,   	KC_C, 		KC_V, 		KC_B, 		KC_N, 		KC_M, 		KC_COMM, 	KC_DOT,		KC_SLSH, 	KC_RSFT,    KC_UP,		KC_PGDN, \
+  KC_LCTL, 	KC_LGUI, 	KC_LALT,							KC_SPC,											KC_RALT,	KC_RCTRL, 	MO(_FL),	KC_LEFT, 	KC_DOWN, 	KC_RGHT),
+
   /* Keymap _UL: Unlock layer
    * ,----------------------------------------------------------------.
    * |   |   |   |   |   |   |   |   |   |   |   |   |   |       |    |
@@ -378,6 +408,29 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
 				}
 			}
 			break;
+		case MACRO_BREATH_TOGGLE:
+			if (record->event.pressed) {
+				breathing_toggle();
+			}
+			break;
+
+		case MACRO_BREATH_SPEED_INC:
+			if (record->event.pressed) {
+				breathing_speed_inc(1);
+			}
+			break;
+
+		case MACRO_BREATH_SPEED_DEC:
+			if (record->event.pressed) {
+				breathing_speed_dec(1);
+			}
+			break;
+
+		case MACRO_BREATH_DEFAULT:
+			if (record->event.pressed) {
+				breathing_defaults();
+			}
+			break;
 	}
     return MACRO_NONE;
-};
\ No newline at end of file
+};
-- 
cgit v1.2.3-70-g09d2


From cc6db9c5408ad303b9d3f47e4deaf78b4fc854d3 Mon Sep 17 00:00:00 2001
From: ishtob <ishtob@gmail.com>
Date: Tue, 11 Jul 2017 13:53:50 -0400
Subject: Adds Hadron Keyboard (#1492)

* adding hadron keymaps

* fix embedded comment

* fixed TWI driver path

* Delete glcdfont.c

* Delete ssd1306.c

* Delete ssd1306.h

* Update readme.md
---
 keyboards/hadron/Makefile                      |   5 +
 keyboards/hadron/config.h                      |  83 +++++
 keyboards/hadron/hadron.c                      |  26 ++
 keyboards/hadron/hadron.h                      |  30 ++
 keyboards/hadron/i2c.c                         | 166 ++++++++++
 keyboards/hadron/i2c.h                         |  49 +++
 keyboards/hadron/keymaps/default/Makefile      |  26 ++
 keyboards/hadron/keymaps/default/config.h      |  20 ++
 keyboards/hadron/keymaps/default/keymap.c      | 408 ++++++++++++++++++++++++
 keyboards/hadron/keymaps/default/readme.md     |   2 +
 keyboards/hadron/keymaps/readme.md             |  23 ++
 keyboards/hadron/keymaps/side_numpad/Makefile  |  26 ++
 keyboards/hadron/keymaps/side_numpad/config.h  |  20 ++
 keyboards/hadron/keymaps/side_numpad/keymap.c  | 418 +++++++++++++++++++++++++
 keyboards/hadron/keymaps/side_numpad/readme.md |   2 +
 keyboards/hadron/out.txt                       |  66 ++++
 keyboards/hadron/readme.md                     |   1 +
 keyboards/hadron/rules.mk                      |  72 +++++
 keyboards/hadron/ver0/Makefile                 |   3 +
 keyboards/hadron/ver0/config.h                 |  35 +++
 keyboards/hadron/ver0/rules.mk                 |   5 +
 keyboards/hadron/ver0/ver0.c                   |   1 +
 keyboards/hadron/ver0/ver0.h                   |   6 +
 keyboards/hadron/ver2/Makefile                 |   3 +
 keyboards/hadron/ver2/config.h                 |  35 +++
 keyboards/hadron/ver2/rules.mk                 |   5 +
 keyboards/hadron/ver2/ver2.c                   |   1 +
 keyboards/hadron/ver2/ver2.h                   |   6 +
 28 files changed, 1543 insertions(+)
 create mode 100644 keyboards/hadron/Makefile
 create mode 100644 keyboards/hadron/config.h
 create mode 100644 keyboards/hadron/hadron.c
 create mode 100644 keyboards/hadron/hadron.h
 create mode 100644 keyboards/hadron/i2c.c
 create mode 100644 keyboards/hadron/i2c.h
 create mode 100644 keyboards/hadron/keymaps/default/Makefile
 create mode 100644 keyboards/hadron/keymaps/default/config.h
 create mode 100644 keyboards/hadron/keymaps/default/keymap.c
 create mode 100644 keyboards/hadron/keymaps/default/readme.md
 create mode 100644 keyboards/hadron/keymaps/readme.md
 create mode 100644 keyboards/hadron/keymaps/side_numpad/Makefile
 create mode 100644 keyboards/hadron/keymaps/side_numpad/config.h
 create mode 100644 keyboards/hadron/keymaps/side_numpad/keymap.c
 create mode 100644 keyboards/hadron/keymaps/side_numpad/readme.md
 create mode 100644 keyboards/hadron/out.txt
 create mode 100644 keyboards/hadron/readme.md
 create mode 100644 keyboards/hadron/rules.mk
 create mode 100644 keyboards/hadron/ver0/Makefile
 create mode 100644 keyboards/hadron/ver0/config.h
 create mode 100644 keyboards/hadron/ver0/rules.mk
 create mode 100644 keyboards/hadron/ver0/ver0.c
 create mode 100644 keyboards/hadron/ver0/ver0.h
 create mode 100644 keyboards/hadron/ver2/Makefile
 create mode 100644 keyboards/hadron/ver2/config.h
 create mode 100644 keyboards/hadron/ver2/rules.mk
 create mode 100644 keyboards/hadron/ver2/ver2.c
 create mode 100644 keyboards/hadron/ver2/ver2.h

(limited to 'keyboards')

diff --git a/keyboards/hadron/Makefile b/keyboards/hadron/Makefile
new file mode 100644
index 000000000..e0e1cc6fb
--- /dev/null
+++ b/keyboards/hadron/Makefile
@@ -0,0 +1,5 @@
+SUBPROJECT_DEFAULT = ver2
+
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/hadron/config.h b/keyboards/hadron/config.h
new file mode 100644
index 000000000..0c19d6c79
--- /dev/null
+++ b/keyboards/hadron/config.h
@@ -0,0 +1,83 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define MANUFACTURER    ishtob
+#define PRODUCT         Hadron Keyboard
+#define DESCRIPTION     A cherry ML ortholinear keyboard
+
+
+
+
+//#define AUDIO_VOICES	
+
+//#define BACKLIGHT_PIN B7
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+#ifdef SUBPROJECT_ver0
+    #include "ver0/config.h"
+#endif
+#ifdef SUBPROJECT_ver2
+    #include "ver2/config.h"
+#endif
+
+#endif
diff --git a/keyboards/hadron/hadron.c b/keyboards/hadron/hadron.c
new file mode 100644
index 000000000..ca5b20e89
--- /dev/null
+++ b/keyboards/hadron/hadron.c
@@ -0,0 +1,26 @@
+#include "hadron.h"
+
+
+void matrix_init_kb(void) {
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
\ No newline at end of file
diff --git a/keyboards/hadron/hadron.h b/keyboards/hadron/hadron.h
new file mode 100644
index 000000000..fceae50d9
--- /dev/null
+++ b/keyboards/hadron/hadron.h
@@ -0,0 +1,30 @@
+#ifndef HADRON_H
+#define HADRON_H
+
+#ifdef SUBPROJECT_ver0
+    #include "ver0.h"
+#endif
+#ifdef SUBPROJECT_ver2
+    #include "ver2.h"
+#endif
+
+#include "quantum.h"
+
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E \
+  ) \
+{ \
+  {  K00,  K01,  K02,  K03,  K04,  K05,  K06,   K07,   K08,   K09,   K0A,   K0B, KC_NO, KC_NO, KC_NO  },  \
+  {  K10,  K11,  K12,  K13,  K14,  K15,  K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E  },  \
+  {  K20,  K21,  K22,  K23,  K24,  K25,  K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E  },  \
+  {  K30,  K31,  K32,  K33,  K34,  K35,  K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E  },  \
+  {  K40,  K41,  K42,  K43,  K44,  K45,  K46,   K47,   K48,   K49,   K4A,   K4B,   K4C,   K4D,   K4E  }   \
+}
+
+
+#endif
diff --git a/keyboards/hadron/i2c.c b/keyboards/hadron/i2c.c
new file mode 100644
index 000000000..cd2b835d5
--- /dev/null
+++ b/keyboards/hadron/i2c.c
@@ -0,0 +1,166 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  // send device address
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+
+
+
+#endif
diff --git a/keyboards/hadron/i2c.h b/keyboards/hadron/i2c.h
new file mode 100644
index 000000000..2bd7f4096
--- /dev/null
+++ b/keyboards/hadron/i2c.h
@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  800000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif
diff --git a/keyboards/hadron/keymaps/default/Makefile b/keyboards/hadron/keymaps/default/Makefile
new file mode 100644
index 000000000..e24ba04b5
--- /dev/null
+++ b/keyboards/hadron/keymaps/default/Makefile
@@ -0,0 +1,26 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+ONEHAND_ENABLE = no        # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/hadron/keymaps/default/config.h b/keyboards/hadron/keymaps/default/config.h
new file mode 100644
index 000000000..4a5a8fad3
--- /dev/null
+++ b/keyboards/hadron/keymaps/default/config.h
@@ -0,0 +1,20 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define LEADER_TIMEOUT 300
+//#define BACKLIGHT_BREATHING
+#define PREVENT_STUCK_MODIFIERS
+
+#define USE_I2C
+#define SSD1306OLED
+
+/* ws2812 RGB LED*/
+#define RGB_DI_PIN D4
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
+#endif
diff --git a/keyboards/hadron/keymaps/default/keymap.c b/keyboards/hadron/keymaps/default/keymap.c
new file mode 100644
index 000000000..24fa0b27f
--- /dev/null
+++ b/keyboards/hadron/keymaps/default/keymap.c
@@ -0,0 +1,408 @@
+#include "hadron.h"
+#include "bootloader.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "LUFA/Drivers/Peripheral/TWI.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#ifdef USE_I2C
+#include "i2c.h"
+#endif
+#ifdef SSD1306OLED
+#include "ssd1306.h"
+#endif
+extern keymap_config_t keymap_config;
+
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _MOUSECURSOR 8
+#define _ADJUST 16
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  RGBLED_TOGGLE,
+  RGBLED_STEP_MODE,
+  RGBLED_INCREASE_HUE,
+  RGBLED_DECREASE_HUE,
+  RGBLED_INCREASE_SAT,
+  RGBLED_DECREASE_SAT,
+  RGBLED_INCREASE_VAL,
+  RGBLED_DECREASE_VAL,
+};
+
+enum macro_keycodes {
+  KC_DEMOMACRO,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
+#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
+#define DEMOMACRO   M(KC_DEMOMACRO)            // Sample for macros
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,------+------+------+------+------+------------------------------------------------.
+ * | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  DEL |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   7  |   8  |   9  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | CAPS |   A  |   S  |   D  |   F  |   G  |   4  |   5  |   6  |   H  |   J  |   K  |   L  | ;/Nav|  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   1  |   2  |   3  |   N  |   M  |   ,  |   .  |   /  |Ctl/Et|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |  `   | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( 
+  KC_ESC,   KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10,  KC_DEL,\
+  KC_TAB,   KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_P7,   KC_P8,   KC_P9,    KC_Y,    KC_U,    KC_I,   KC_O,    KC_P,     KC_BSPC, \
+  KC_CAPS,  KC_A,     KC_S,    KC_D,    KC_F,    KC_G,    KC_P4,   KC_P5,   KC_P6,    KC_H,    KC_J,    KC_K,   KC_L,LT_MC(KC_SCLN), KC_QUOT, \
+  KC_LSFT,  KC_Z,     KC_X,    KC_C,    KC_V,    KC_B,    KC_P1,   KC_P2,   KC_P3,    KC_N,    KC_M,    KC_COMM,KC_DOT,  KC_SLSH,  CTL_ENT, \
+  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,  KC_SPC,   RAISE,   KC_LEFT,KC_DOWN, KC_UP,    KC_RGHT  \
+),
+
+/* Colemak
+ * ,------+------+------+------+------+------------------------------------------------.
+ * | Esc  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   7  |   8  |   9  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | CAPS |   A  |   R  |   S  |   T  |   D  |   4  |   5  |   6  |   H  |   N  |   E  |   I  |   O  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   1  |   2  |   3  |   K  |   M  |   ,  |   .  |   /  |Ctl/Et|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( 
+  KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10, KC_DEL,\
+  KC_TAB,   KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_P7,   KC_P8,   KC_P9,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN,  KC_BSPC, \
+  KC_LCTRL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_P4,   KC_P5,   KC_P6,    KC_H,    KC_N,    KC_E,    KC_I, LT_MC(KC_O), KC_QUOT, \
+  KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_P1,   KC_P2,   KC_P3,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  CTL_ENT, \
+  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,  KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,   KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,    KC_RGHT  \
+  ),
+
+/* Dvorak
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   7  |   8  |   9  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   4  |   5  |   6  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   1  |   2  |   3  |   B  |   M  |   W  |   V  |   Z  |Ctl/Et|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  | Ctrl | Alt  | GUI  |Lower |Space |   0  |   .  |   =  |Space |Raise | Left | Down |  Up  |Right |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( 
+  KC_ESC,   KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,    KC_F9,   KC_F10, KC_DEL,\
+  KC_TAB,   KC_QUOT,  KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_P7,   KC_P8,   KC_P9,    KC_F,    KC_G,   KC_C,    KC_R,    KC_L,     KC_BSPC, \
+  KC_LCTL,  KC_A,     KC_O,    KC_E,    KC_U,    KC_I,    KC_P4,   KC_P5,   KC_P6,    KC_D,    KC_H,   KC_T,    KC_N, LT_MC(KC_S), KC_SLSH, \
+  KC_LSFT,  KC_SCLN,  KC_Q,    KC_J,    KC_K,    KC_X,    KC_P1,   KC_P2,   KC_P3,    KC_B,    KC_M,   KC_W,    KC_V,    KC_Z,     CTL_ENT, \
+  KC_GRV,   KC_LCTRL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_P0,   KC_DOT,  KC_EQL,   KC_SPC,  RAISE,  KC_LEFT, KC_DOWN, KC_UP,    KC_RGHT \
+),
+ 
+/* Lower
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |      |      |      |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 |ISO ~ |ISO | |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( 
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR,  KC_LPRN, KC_RPRN, KC_DEL, \
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_UNDS, KC_PLUS,  KC_LBRC, KC_RBRC, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+ 
+/* Raise
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |      |      |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |      |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |      |  F12 |ISO # |ISO / |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( 
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______,  _______, KC_SPC, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY   \
+),
+ 
+/* Mouse Layer (semi-col)
+ * ,------+------+------+------+------+------------------------------------------------.
+ * | ACCL0| ACCL1| ACCL2|      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |      |      |      |      |      |      |      | Home | Wh_Up| WHL_L| M_Up | WHL_R| Macro|      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | End  | Wh_Dn| M_Lft| M_Dn | M_Rt |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      | BTN2 | BTN3 | BTN4 | BTN5 |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      | BTN1 |      |      |      | BTN1 |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+ 
+[_MOUSECURSOR] = KEYMAP( 
+  KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R,DEMOMACRO,_______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, \
+  _______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______  \
+),
+ 
+/* Adjust (Lower + Raise)
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +|      |      |      |      |      |  Del |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|      |      |      |AGswap|Qwerty|Colemk|      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|      |      |      |      |      |      |      | BL + |BL ST |BL TG |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] = KEYMAP( 
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+  RESET,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, _______, _______, _______, AG_SWAP, QWERTY,  COLEMAK, _______,  _______,  _______, \
+  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF, _______, _______, _______,  _______, BL_DEC,  BL_INC,  BL_STEP, BL_TOGG, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\
+)
+ 
+
+
+};
+
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+float tone_goodbye[][2]    = SONG(GOODBYE_SOUND);
+#endif
+
+// define variables for reactive RGB
+bool RGB_INIT = false;
+bool TOG_STATUS = false;
+int RGB_current_mode;
+
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    rgblight_mode(RGB_current_mode);
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+          //not sure how to have keyboard check mode and set it to a variable, so my work around
+          //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          rgblight_mode(16);
+        }
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        rgblight_mode(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
+        TOG_STATUS = false;
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        //not sure how to have keyboard check mode and set it to a variable, so my work around
+        //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          rgblight_mode(15);
+        }
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        rgblight_mode(RGB_current_mode);  // revert RGB to initial mode prior to RGB mode change
+        layer_off(_RAISE);
+        TOG_STATUS = false;
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case RGB_MOD:
+      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
+      if (record->event.pressed) {
+        rgblight_mode(RGB_current_mode);
+        rgblight_step();
+        RGB_current_mode = rgblight_config.mode;
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+  #ifdef USE_I2C
+    i2c_master_init();
+  #ifdef SSD1306OLED
+  // calls code for the SSD1306 OLED
+        _delay_ms(400);
+        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
+        iota_gfx_init();   // turns on the display
+  #endif
+  #endif
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+void matrix_scan_user(void) {
+    #ifdef SSD1306OLED
+     iota_gfx_task();  // this is what updates the display continuously
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{cc
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    if (!eeconfig_is_enabled()) {
+      eeconfig_init();
+    }
+
+    switch (id) {  
+      case KC_DEMOMACRO:
+        if (record->event.pressed){
+          return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D),  END);
+        }  
+    }
+
+    return MACRO_NONE;
+}
diff --git a/keyboards/hadron/keymaps/default/readme.md b/keyboards/hadron/keymaps/default/readme.md
new file mode 100644
index 000000000..de9680b49
--- /dev/null
+++ b/keyboards/hadron/keymaps/default/readme.md
@@ -0,0 +1,2 @@
+# The Default Planck Layout
+
diff --git a/keyboards/hadron/keymaps/readme.md b/keyboards/hadron/keymaps/readme.md
new file mode 100644
index 000000000..54fb5f6d9
--- /dev/null
+++ b/keyboards/hadron/keymaps/readme.md
@@ -0,0 +1,23 @@
+# How to add your own keymap
+
+Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
+
+    _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
+
+\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
+
+and contain the following files:
+
+* `keymap.c`
+* `readme.md` *recommended*
+* `config.h` *optional*, found automatically when compiling
+* `Makefile` *optional*, found automatically when compling
+
+When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
+
+     * **folder_name** description
+
+# List of Planck keymaps
+
+* **default** default Planck layout
+* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file
diff --git a/keyboards/hadron/keymaps/side_numpad/Makefile b/keyboards/hadron/keymaps/side_numpad/Makefile
new file mode 100644
index 000000000..5cdc186cd
--- /dev/null
+++ b/keyboards/hadron/keymaps/side_numpad/Makefile
@@ -0,0 +1,26 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+ONEHAND_ENABLE = no        # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/hadron/keymaps/side_numpad/config.h b/keyboards/hadron/keymaps/side_numpad/config.h
new file mode 100644
index 000000000..4a5a8fad3
--- /dev/null
+++ b/keyboards/hadron/keymaps/side_numpad/config.h
@@ -0,0 +1,20 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define LEADER_TIMEOUT 300
+//#define BACKLIGHT_BREATHING
+#define PREVENT_STUCK_MODIFIERS
+
+#define USE_I2C
+#define SSD1306OLED
+
+/* ws2812 RGB LED*/
+#define RGB_DI_PIN D4
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
+#endif
diff --git a/keyboards/hadron/keymaps/side_numpad/keymap.c b/keyboards/hadron/keymaps/side_numpad/keymap.c
new file mode 100644
index 000000000..cfe6cc539
--- /dev/null
+++ b/keyboards/hadron/keymaps/side_numpad/keymap.c
@@ -0,0 +1,418 @@
+#include "hadron.h"
+#include "bootloader.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "LUFA/Drivers/Peripheral/TWI.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#ifdef USE_I2C
+#include "i2c.h"
+#endif
+#ifdef SSD1306OLED
+#include "ssd1306.h"
+#endif
+extern keymap_config_t keymap_config;
+
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 3
+#define _RAISE 4
+#define _FNLAYER 6
+#define _NUMLAY 7
+#define _MOUSECURSOR 8
+#define _ADJUST 16
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  RGBLED_TOGGLE,
+  RGBLED_STEP_MODE,
+  RGBLED_INCREASE_HUE,
+  RGBLED_DECREASE_HUE,
+  RGBLED_INCREASE_SAT,
+  RGBLED_DECREASE_SAT,
+  RGBLED_INCREASE_VAL,
+  RGBLED_DECREASE_VAL,
+};
+
+enum macro_keycodes {
+  KC_DEMOMACRO,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define CTL_TTAB    CTL_T(KC_TAB)               // Tap for Esc, hold for Ctrl
+#define CTL_ENT     CTL_T(KC_ENT)               // Tap for Enter, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_FN(kc)   LT(_FNLAYER, kc)            // L-ayer T-ap Function Layer
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define LT_RAI(kc)  LT(_RAISE, kc)              // L-ayer T-ap to Raise
+#define TG_NUMLAY   TG(_NUMLAY)                 //Toggle for layer _NUMLAY
+#define DEMOMACRO    M(KC_DEMOMACRO)                // My login macros
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,------+------+------+------+------+------------------------------------------------.
+ * |  Esc |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |   7  |   8  |   9  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | CAPS |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |Enter |   4  |   5  |   6  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |   =  |   1  |   2  |   3  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   ~  | Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | RAlt | Ins  |  Del |NumLay|   0  |   .  |  ENT |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( 
+  KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,          KC_MINS,\
+  KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,           KC_BSPC,    KC_P7,   KC_P8,   KC_P9, \
+  KC_CAPS,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    LT_MC(KC_SCLN), CTL_ENT,    KC_P4,   KC_P5,   KC_P6, \
+  KC_LSFT,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,         KC_EQL,    KC_P1,   KC_P2,   KC_P3, \
+  KC_GRV,    KC_RCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_RALT, KC_INS,  KC_DEL,       TG_NUMLAY,    KC_P0,   KC_PDOT, KC_PENT \
+),
+ 
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   ~  |  \   |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * | CAPS |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |   [  |   ]  |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( 
+  KC_ESC,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,      KC_NO,      KC_NO,   KC_NO,   KC_NO,   KC_NO, \
+  KC_1,       KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,       KC_8,       KC_9,    KC_0,  KC_GRV, KC_BSLS, _______, _______, _______, \
+  KC_CAPS,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,    KC_UNDS,     KC_EQL, KC_LBRC, KC_RBRC, KC_PIPE, _______, _______, _______, \
+  _______,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______,    _______,    KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______\
+),
+ 
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   ~  |  \   |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
+ * |      |   A  |  Up  |   D  | PrSc |      |   4  |   5  |   6  |   *  |   :  |  '   |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  Lt  |  Dn  |  Rt  | Mute |      |   1  |   2  |   3  |  Up  |   /  |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |Space |   0  |      | Left | Down | Right|      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( 
+  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,   KC_F6, KC_F7,   KC_F8,      KC_F9,  KC_F10,   KC_F11,  KC_F12, \
+  KC_1,    KC_2,    KC_3,    KC_4,     KC_5,        KC_6,  KC_7,    KC_8,       KC_9,    KC_0,  KC_PLUS, KC_BSLS, _______, _______, _______, \
+  _______, KC_A,    KC_UP,   KC_D,     KC_PSCR,  _______,  KC_4,    KC_5,       KC_6, KC_PAST,  KC_COLN, KC_QUOT, _______, _______, _______, \
+  _______, KC_LEFT, KC_DOWN, KC_RIGHT, KC__MUTE, _______,  KC_1,    KC_2,       KC_3,   KC_UP,  KC_SLSH, _______, _______, _______, _______, \
+  _______, _______, _______, _______,   _______,  KC_SPC,  KC_0,   _______,  KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______  \
+),
+ 
+/* FN layer on Esc key
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |   +  |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   =  |   [  |   ]  |  '   |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |   {  |   }  |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_FNLAYER] = KEYMAP( 
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______,\
+  _______, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC, KC_CIRC,   KC_AMPR,    KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS, _______, _______, _______, \
+  _______,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,     KC_EQL, KC_LBRC, KC_RBRC, KC_QUOT, _______, _______, _______, \
+  _______,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,S(KC_NUHS), S(KC_NUBS), KC_LCBR, KC_RCBR, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______,   _______,    KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______ \
+),
+ 
+/* Num Layer
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |  F7  |  F8  |  F9  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |  F4  |  F5  |  F6  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |  Up  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | Exit | Left | Down | Rght |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_NUMLAY] = KEYMAP( 
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______,\
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_INS,  KC_HOME,  KC_PGUP,   \
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_DEL,   KC_END,  KC_PGDN,   \
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_PMNS,    KC_UP,   KC_PPLS,   \
+  _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT \
+),
+ 
+/* Mouse Layer (semi-col)
+ * ,-----------------------------------------------------------------------------------.
+ * |      |ACCL0| ACCL1| ACCL2 |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |      |      |      |      | Home | Wh_Up| WHL_L| M_Up | WHL_R|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      | End  | Wh_Dn| M_Lft| M_Dn | M_Rt |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      | BTN2 | BTN3 | BTN4 | BTN5 |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      | BTN1 |      |      |      | BTN1 |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+ 
+[_MOUSECURSOR] = KEYMAP( 
+  _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______,   _______, _______,\
+  _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R, DEMOMACRO, _______, _______, _______, _______, \
+  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R,   _______, _______, _______, _______, _______, \
+  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5,   _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______,   _______, _______, _______, _______, _______ \
+),
+ 
+/* Adjust (Lower + Raise)
+ 
+ * ,-----------------------------------------------------------------------------------.
+ * | Reset|      |      |      |      |      |      |      |      | VolD | VolU | Mute |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
+ * |      |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +|      |      |  Del |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      | BL + |BL ST |BLSTEP| BL TG|      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `--------------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] = KEYMAP( 
+  RESET,     KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO, KC_VOLD, KC_VOLU, KC_MUTE, \
+  _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,  KC_DEL, _______, _______, _______, \
+  _______, _______, _______,   AU_ON,  AU_OFF, AG_NORM, AG_SWAP,  QWERTY, _______, _______, _______, _______, _______, _______, _______, \
+  _______,  MUV_DE,  MUV_IN,   MU_ON,  MU_OFF,   MI_ON,  MI_OFF, _______, BL_DEC,  BL_INC,  BL_STEP, BL_TOGG, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+ 
+
+
+};
+
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+float tone_goodbye[][2]    = SONG(GOODBYE_SOUND);
+#endif
+
+// define variables for reactive RGB
+bool RGB_INIT = false;
+bool TOG_STATUS = false;
+bool NUMLAY_STATUS = false;
+int RGB_current_mode;
+
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    rgblight_mode(RGB_current_mode);
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+          //not sure how to have keyboard check mode and set it to a variable, so my work around
+          //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          rgblight_mode(16);
+        }
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        rgblight_mode(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
+        TOG_STATUS = false;
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        //not sure how to have keyboard check mode and set it to a variable, so my work around
+        //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          rgblight_mode(15);
+        }
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        rgblight_mode(RGB_current_mode);  // revert RGB to initial mode prior to RGB mode change
+        layer_off(_RAISE);
+        TOG_STATUS = false;
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+      //my attempt for RGB layer lock indication via changing the mode, still have to figure out how to not have other keypress not override this mode
+    case TG_NUMLAY:
+      if (record->event.pressed) {
+        if (RGB_INIT) {} else {
+          RGB_current_mode = rgblight_config.mode;
+          RGB_INIT = true;
+        }
+        NUMLAY_STATUS = !NUMLAY_STATUS;
+        if (NUMLAY_STATUS) {
+        rgblight_mode(4);
+        layer_on(_NUMLAY);
+        } else {
+        rgblight_mode(RGB_current_mode);  
+        layer_off(_NUMLAY); }
+      }
+      return false;
+      break;
+    case RGB_MOD:
+      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
+      if (record->event.pressed) {
+        rgblight_mode(RGB_current_mode);
+        rgblight_step();
+        RGB_current_mode = rgblight_config.mode;
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+  #ifdef USE_I2C
+    i2c_master_init();
+  #ifdef SSD1306OLED
+  // calls code for the SSD1306 OLED
+        _delay_ms(400);
+        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
+        iota_gfx_init();   // turns on the display
+  #endif
+  #endif
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+void matrix_scan_user(void) {
+    #ifdef SSD1306OLED
+     iota_gfx_task();  // this is what updates the display continuously
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{cc
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    if (!eeconfig_is_enabled()) {
+      eeconfig_init();
+    }
+
+    switch (id) {  
+      case KC_DEMOMACRO:
+        if (record->event.pressed){
+          return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D),  END);
+        }  
+    }
+
+    return MACRO_NONE;
+}
diff --git a/keyboards/hadron/keymaps/side_numpad/readme.md b/keyboards/hadron/keymaps/side_numpad/readme.md
new file mode 100644
index 000000000..de9680b49
--- /dev/null
+++ b/keyboards/hadron/keymaps/side_numpad/readme.md
@@ -0,0 +1,2 @@
+# The Default Planck Layout
+
diff --git a/keyboards/hadron/out.txt b/keyboards/hadron/out.txt
new file mode 100644
index 000000000..644a6a777
--- /dev/null
+++ b/keyboards/hadron/out.txt
@@ -0,0 +1,66 @@
+-------- begin --------
+avr-gcc.exe (AVR_8_bit_GNU_Toolchain_3.5.0_1662) 4.9.2
+Copyright (C) 2014 Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+Compiling: ../../keyboards/planck/planck.c                            [OK]
+Compiling: ../../keyboards/planck/keymaps/experimental/keymap.c       [WARNINGS]
+ | 
+ | ../../keyboards/planck/keymaps/experimental/keymap.c: In function 'action_get_macro':
+ | ../../keyboards/planck/keymaps/experimental/keymap.c:227:17: warning: implicit declaration of function 'breathing_speed_set' [-Wimplicit-function-declaration]
+ |                  breathing_speed_set(2);
+ |                  ^
+ | ../../keyboards/planck/keymaps/experimental/keymap.c:228:17: warning: implicit declaration of function 'breathing_pulse' [-Wimplicit-function-declaration]
+ |                  breathing_pulse();
+ |                  ^
+ | 
+Compiling: ../../quantum/quantum.c                                    [OK]
+Compiling: ../../quantum/keymap.c                                     [OK]
+Compiling: ../../quantum/keycode_config.c                             [OK]
+Compiling: ../../quantum/matrix.c                                     [OK]
+Compiling: ../../quantum/audio/audio.c                                [OK]
+Compiling: ../../quantum/audio/voices.c                               [OK]
+Compiling: ../../quantum/audio/luts.c                                 [OK]
+Compiling: ../../tmk_core/protocol/lufa/lufa.c                        [OK]
+Compiling: ../../tmk_core/protocol/lufa/descriptor.c                  [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Class/Common/HIDParser.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/ConfigDescriptors.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/DeviceStandardReq.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/HostStandardReq.c [OK]
+Compiling: ../../tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/USBTask.c [OK]
+Compiling: ../../tmk_core/common/host.c                               [OK]
+Compiling: ../../tmk_core/common/keyboard.c                           [OK]
+Compiling: ../../tmk_core/common/action.c                             [OK]
+Compiling: ../../tmk_core/common/action_tapping.c                     [OK]
+Compiling: ../../tmk_core/common/action_macro.c                       [OK]
+Compiling: ../../tmk_core/common/action_layer.c                       [OK]
+Compiling: ../../tmk_core/common/action_util.c                        [OK]
+Compiling: ../../tmk_core/common/print.c                              [OK]
+Compiling: ../../tmk_core/common/debug.c                              [OK]
+Compiling: ../../tmk_core/common/util.c                               [OK]
+Compiling: ../../tmk_core/common/avr/suspend.c                        [OK]
+Assembling: ../../tmk_core/common/avr/xprintf.S                       [OK]
+Compiling: ../../tmk_core/common/avr/timer.c                          [OK]
+Compiling: ../../tmk_core/common/avr/bootloader.c                     [OK]
+Compiling: ../../tmk_core/common/magic.c                              [OK]
+Compiling: ../../tmk_core/common/avr/eeconfig.c                       [OK]
+Compiling: ../../tmk_core/common/mousekey.c                           [OK]
+Compiling: ../../tmk_core/common/command.c                            [OK]
+Compiling: ../../tmk_core/common/backlight.c                          [OK]
+Linking: .build/planck_experimental.elf                               [ERRORS]
+ | 
+ | .build/obj_planck_experimental/keyboards/planck/keymaps/experimental/keymap.o: In function `action_get_macro':
+ | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:240: undefined reference to `breathing_speed_set'
+ | C:\Users\Fred Wales\Documents\Programming\qmk_firmware\keyboards\planck/../../keyboards/planck/keymaps/experimental/keymap.c:241: undefined reference to `breathing_pulse'
+ | collect2.exe: error: ld returned 1 exit status
+ | 
diff --git a/keyboards/hadron/readme.md b/keyboards/hadron/readme.md
new file mode 100644
index 000000000..8b1378917
--- /dev/null
+++ b/keyboards/hadron/readme.md
@@ -0,0 +1 @@
+
diff --git a/keyboards/hadron/rules.mk b/keyboards/hadron/rules.mk
new file mode 100644
index 000000000..78f86f982
--- /dev/null
+++ b/keyboards/hadron/rules.mk
@@ -0,0 +1,72 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= no        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+SRC = i2c.c \
+	  ssd1306.c
+
diff --git a/keyboards/hadron/ver0/Makefile b/keyboards/hadron/ver0/Makefile
new file mode 100644
index 000000000..191c6bb66
--- /dev/null
+++ b/keyboards/hadron/ver0/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/hadron/ver0/config.h b/keyboards/hadron/ver0/config.h
new file mode 100644
index 000000000..039d4f1c7
--- /dev/null
+++ b/keyboards/hadron/ver0/config.h
@@ -0,0 +1,35 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef VER0_CONFIG_H
+#define VER0_CONFIG_H
+
+#include "../config.h"
+
+/* USB Device descriptor parameter */
+#define DEVICE_VER      0x0001
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* Hadron Ver0 PCB default pin-out */
+#define MATRIX_ROW_PINS { D7, E6, B4, B5, B6 }
+#define MATRIX_COL_PINS { F6, F7, C6, C7, F5, F4, F1, F0, D2, D3, D5, B3, B2, B1, B0 }
+#define UNUSED_PINS
+
+
+#endif
diff --git a/keyboards/hadron/ver0/rules.mk b/keyboards/hadron/ver0/rules.mk
new file mode 100644
index 000000000..0f9667a8a
--- /dev/null
+++ b/keyboards/hadron/ver0/rules.mk
@@ -0,0 +1,5 @@
+#AUDIO_ENABLE ?= yes           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/hadron/ver0/ver0.c b/keyboards/hadron/ver0/ver0.c
new file mode 100644
index 000000000..acb3a9105
--- /dev/null
+++ b/keyboards/hadron/ver0/ver0.c
@@ -0,0 +1 @@
+#include "ver0.h"
\ No newline at end of file
diff --git a/keyboards/hadron/ver0/ver0.h b/keyboards/hadron/ver0/ver0.h
new file mode 100644
index 000000000..5710af322
--- /dev/null
+++ b/keyboards/hadron/ver0/ver0.h
@@ -0,0 +1,6 @@
+#ifndef VER0_H
+#define VER0_H
+
+#include "../hadron.h"
+
+#endif
\ No newline at end of file
diff --git a/keyboards/hadron/ver2/Makefile b/keyboards/hadron/ver2/Makefile
new file mode 100644
index 000000000..191c6bb66
--- /dev/null
+++ b/keyboards/hadron/ver2/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/hadron/ver2/config.h b/keyboards/hadron/ver2/config.h
new file mode 100644
index 000000000..71a0ab5b3
--- /dev/null
+++ b/keyboards/hadron/ver2/config.h
@@ -0,0 +1,35 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef VER2_CONFIG_H
+#define VER2_CONFIG_H
+
+#include "../config.h"
+
+/* USB Device descriptor parameter */
+#define DEVICE_VER      0x0002
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* Hadron Ver0 PCB default pin-out */
+#define MATRIX_ROW_PINS { D7, E6, B4, B5, B6 }
+#define MATRIX_COL_PINS { F6, F7, D6, C7, F5, F4, F1, F0, D2, D3, D5, B3, B2, B1, B0 }
+#define UNUSED_PINS
+
+
+#endif
diff --git a/keyboards/hadron/ver2/rules.mk b/keyboards/hadron/ver2/rules.mk
new file mode 100644
index 000000000..0f9667a8a
--- /dev/null
+++ b/keyboards/hadron/ver2/rules.mk
@@ -0,0 +1,5 @@
+#AUDIO_ENABLE ?= yes           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/hadron/ver2/ver2.c b/keyboards/hadron/ver2/ver2.c
new file mode 100644
index 000000000..bc0917746
--- /dev/null
+++ b/keyboards/hadron/ver2/ver2.c
@@ -0,0 +1 @@
+#include "ver2.h"
\ No newline at end of file
diff --git a/keyboards/hadron/ver2/ver2.h b/keyboards/hadron/ver2/ver2.h
new file mode 100644
index 000000000..54e141ffa
--- /dev/null
+++ b/keyboards/hadron/ver2/ver2.h
@@ -0,0 +1,6 @@
+#ifndef VER2_H
+#define VER2_H
+
+#include "../hadron.h"
+
+#endif
\ No newline at end of file
-- 
cgit v1.2.3-70-g09d2


From cc468523dfec8175939f575a214714eea8aaa7a3 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Tue, 11 Jul 2017 14:23:26 -0400
Subject: clean up ssd1306 implementation

---
 drivers/avr/ssd1306.c                             | 174 ++--------------------
 drivers/avr/ssd1306.h                             |  77 ++++++++++
 keyboards/lets_split/keymaps/OLED_sample/keymap.c |  78 ++++++++++
 3 files changed, 169 insertions(+), 160 deletions(-)

(limited to 'keyboards')

diff --git a/drivers/avr/ssd1306.c b/drivers/avr/ssd1306.c
index e454f5437..03a909e9d 100644
--- a/drivers/avr/ssd1306.c
+++ b/drivers/avr/ssd1306.c
@@ -1,7 +1,6 @@
 #ifdef SSD1306OLED
 
 #include "ssd1306.h"
-#include "config.h"
 #include "i2c.h"
 #include <string.h>
 #include "print.h"
@@ -13,18 +12,7 @@
 #include "lufa.h"
 #endif
 #include "sendchar.h"
-#include "pincontrol.h"
-
-//assign the right code to your layers
-#define _BASE 0
-#define _LOWER 8
-#define _RAISE 16
-#define _FNLAYER 64
-#define _NUMLAY 128
-#define _NLOWER 136
-#define _NFNLAYER 192
-#define _MOUSECURSOR 256
-#define _ADJUST 65560
+#include "timer.h"
 
 // Set this to 1 to help diagnose early startup problems
 // when testing power-on with ble.  Turn it off otherwise,
@@ -32,26 +20,6 @@
 // with the matrix scan, causing keys to drop.
 #define DEBUG_TO_SCREEN 0
 
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#define i2cAddress 0x3C
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
-};
-
-static struct CharacterMatrix display;
 //static uint16_t last_battery_update;
 //static uint32_t vbat;
 //#define BatteryUpdateInterval 10000 /* milliseconds */
@@ -61,54 +29,13 @@ static uint8_t displaying;
 #endif
 static uint16_t last_flush;
 
-enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-
 // Write command sequence.
 // Returns true on success.
 static inline bool _send_cmd1(uint8_t cmd) {
   bool res = false;
 
-  if (i2c_start_write(i2cAddress)) {
-    xprintf("failed to start write to %d\n", i2cAddress);
+  if (i2c_start_write(SSD1306_ADDRESS)) {
+    xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
     goto done;
   }
 
@@ -153,8 +80,6 @@ static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
 #define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
 #define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
 
-static void matrix_clear(struct CharacterMatrix *matrix);
-
 static void clear_display(void) {
   matrix_clear(&display);
 
@@ -163,7 +88,7 @@ static void clear_display(void) {
   send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
   send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
 
-  if (i2c_start_write(i2cAddress)) {
+  if (i2c_start_write(SSD1306_ADDRESS)) {
     goto done;
   }
   if (i2c_master_write(0x40)) {
@@ -262,7 +187,7 @@ done:
   return success;
 }
 
-static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
   *matrix->cursor = c;
   ++matrix->cursor;
 
@@ -275,7 +200,7 @@ static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
   }
 }
 
-static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
   matrix->dirty = true;
 
   if (c == '\n') {
@@ -296,7 +221,7 @@ void iota_gfx_write_char(uint8_t c) {
   matrix_write_char(&display, c);
 }
 
-static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
+void matrix_write(struct CharacterMatrix *matrix, const char *data) {
   const char *end = data + strlen(data);
   while (data < end) {
     matrix_write_char(matrix, *data);
@@ -308,7 +233,7 @@ void iota_gfx_write(const char *data) {
   matrix_write(&display, data);
 }
 
-static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
   while (true) {
     uint8_t c = pgm_read_byte(data);
     if (c == 0) {
@@ -323,7 +248,7 @@ void iota_gfx_write_P(const char *data) {
   matrix_write_P(&display, data);
 }
 
-static void matrix_clear(struct CharacterMatrix *matrix) {
+void matrix_clear(struct CharacterMatrix *matrix) {
   memset(matrix->display, ' ', sizeof(matrix->display));
   matrix->cursor = &matrix->display[0][0];
   matrix->dirty = true;
@@ -333,7 +258,7 @@ void iota_gfx_clear_screen(void) {
   matrix_clear(&display);
 }
 
-static void matrix_render(struct CharacterMatrix *matrix) {
+void matrix_render(struct CharacterMatrix *matrix) {
   last_flush = timer_read();
   iota_gfx_on();
 #if DEBUG_TO_SCREEN
@@ -344,7 +269,7 @@ static void matrix_render(struct CharacterMatrix *matrix) {
   send_cmd3(PageAddr, 0, MatrixRows - 1);
   send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
 
-  if (i2c_start_write(i2cAddress)) {
+  if (i2c_start_write(SSD1306_ADDRESS)) {
     goto done;
   }
   if (i2c_master_write(0x40)) {
@@ -379,84 +304,13 @@ void iota_gfx_flush(void) {
   matrix_render(&display);
 }
 
-static void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static void render_status_info(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
-#endif
+__attribute__((weak))
+void iota_gfx_task_user(void) {
 
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case _BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case _RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case _LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case _ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-  
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
 }
 
 void iota_gfx_task(void) {
-  render_status_info();
+  iota_gfx_task_user();
 
   if (display.dirty) {
     iota_gfx_flush();
diff --git a/drivers/avr/ssd1306.h b/drivers/avr/ssd1306.h
index b0c74f987..1b6f8a493 100644
--- a/drivers/avr/ssd1306.h
+++ b/drivers/avr/ssd1306.h
@@ -3,6 +3,71 @@
 
 #include <stdbool.h>
 #include <stdio.h>
+#include "pincontrol.h"
+#include "config.h"
+
+enum ssd1306_cmds {
+  DisplayOff = 0xAE,
+  DisplayOn = 0xAF,
+
+  SetContrast = 0x81,
+  DisplayAllOnResume = 0xA4,
+
+  DisplayAllOn = 0xA5,
+  NormalDisplay = 0xA6,
+  InvertDisplay = 0xA7,
+  SetDisplayOffset = 0xD3,
+  SetComPins = 0xda,
+  SetVComDetect = 0xdb,
+  SetDisplayClockDiv = 0xD5,
+  SetPreCharge = 0xd9,
+  SetMultiPlex = 0xa8,
+  SetLowColumn = 0x00,
+  SetHighColumn = 0x10,
+  SetStartLine = 0x40,
+
+  SetMemoryMode = 0x20,
+  ColumnAddr = 0x21,
+  PageAddr = 0x22,
+
+  ComScanInc = 0xc0,
+  ComScanDec = 0xc8,
+  SegRemap = 0xa0,
+  SetChargePump = 0x8d,
+  ExternalVcc = 0x01,
+  SwitchCapVcc = 0x02,
+
+  ActivateScroll = 0x2f,
+  DeActivateScroll = 0x2e,
+  SetVerticalScrollArea = 0xa3,
+  RightHorizontalScroll = 0x26,
+  LeftHorizontalScroll = 0x27,
+  VerticalAndRightHorizontalScroll = 0x29,
+  VerticalAndLeftHorizontalScroll = 0x2a,
+};
+
+// Controls the SSD1306 128x32 OLED display via i2c
+
+#ifndef SSD1306_ADDRESS
+#define SSD1306_ADDRESS 0x3C
+#endif
+
+#define DisplayHeight 32
+#define DisplayWidth 128
+
+#define FontHeight 8
+#define FontWidth 6
+
+#define MatrixRows (DisplayHeight / FontHeight)
+#define MatrixCols (DisplayWidth / FontWidth)
+
+struct CharacterMatrix {
+  uint8_t display[MatrixRows][MatrixCols];
+  uint8_t *cursor;
+  bool dirty;
+};
+
+struct CharacterMatrix display;
 
 bool iota_gfx_init(void);
 void iota_gfx_task(void);
@@ -14,4 +79,16 @@ void iota_gfx_write(const char *data);
 void iota_gfx_write_P(const char *data);
 void iota_gfx_clear_screen(void);
 
+__attribute__((weak))
+void iota_gfx_task_user(void);
+
+void matrix_clear(struct CharacterMatrix *matrix);
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write(struct CharacterMatrix *matrix, const char *data);
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
+void matrix_render(struct CharacterMatrix *matrix);
+
+
+
 #endif
diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
index 5dbab5332..ad32269c8 100644
--- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c
+++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
@@ -357,3 +357,81 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
     return MACRO_NONE;
 }
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case _QWERTY:
+        case _COLEMAK:
+        case _DVORAK:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case _RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case _LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case _ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+  
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}
\ No newline at end of file
-- 
cgit v1.2.3-70-g09d2


From 087af43dee545792f486069481460ed5997bc41b Mon Sep 17 00:00:00 2001
From: ishtob <ishtob@gmail.com>
Date: Wed, 12 Jul 2017 12:10:28 -0400
Subject: fix implementation issues from SSD1306 clean up, added rotation
 (#1494)

* moved OLED update task to keymap

* fix splitting render display to keymap

* Added rotation option for OLED, fixed splitting display render update to keymap

* issues with attribute
---
 drivers/avr/ssd1306.c                             | 16 +++--
 drivers/avr/ssd1306.h                             |  1 -
 keyboards/hadron/keymaps/default/config.h         |  1 +
 keyboards/hadron/keymaps/default/keymap.c         | 88 +++++++++++++++++++++++
 keyboards/hadron/keymaps/side_numpad/config.h     |  1 +
 keyboards/hadron/keymaps/side_numpad/keymap.c     | 87 ++++++++++++++++++++++
 keyboards/lets_split/keymaps/OLED_sample/config.h |  1 +
 keyboards/lets_split/keymaps/OLED_sample/keymap.c | 22 ++++--
 8 files changed, 203 insertions(+), 14 deletions(-)

(limited to 'keyboards')

diff --git a/drivers/avr/ssd1306.c b/drivers/avr/ssd1306.c
index 03a909e9d..bb8938bba 100644
--- a/drivers/avr/ssd1306.c
+++ b/drivers/avr/ssd1306.c
@@ -134,14 +134,17 @@ bool iota_gfx_init(void) {
   send_cmd2(SetChargePump, 0x14 /* Enable */);
   send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
 
-/// Flips the display orientation 0 degrees
-  send_cmd1(SegRemap | 0x1);
-  send_cmd1(ComScanDec);
-/*
+#ifdef OLED_ROTATE180
 // the following Flip the display orientation 180 degrees
   send_cmd1(SegRemap);
   send_cmd1(ComScanInc);
-// end flip */
+#endif
+#ifndef OLED_ROTATE180
+// Flips the display orientation 0 degrees
+  send_cmd1(SegRemap | 0x1);
+  send_cmd1(ComScanDec);
+#endif
+  
   send_cmd2(SetComPins, 0x2);
   send_cmd2(SetContrast, 0x8f);
   send_cmd2(SetPreCharge, 0xf1);
@@ -304,9 +307,8 @@ void iota_gfx_flush(void) {
   matrix_render(&display);
 }
 
-__attribute__((weak))
+__attribute__ ((weak))
 void iota_gfx_task_user(void) {
-
 }
 
 void iota_gfx_task(void) {
diff --git a/drivers/avr/ssd1306.h b/drivers/avr/ssd1306.h
index 1b6f8a493..df6a75359 100644
--- a/drivers/avr/ssd1306.h
+++ b/drivers/avr/ssd1306.h
@@ -79,7 +79,6 @@ void iota_gfx_write(const char *data);
 void iota_gfx_write_P(const char *data);
 void iota_gfx_clear_screen(void);
 
-__attribute__((weak))
 void iota_gfx_task_user(void);
 
 void matrix_clear(struct CharacterMatrix *matrix);
diff --git a/keyboards/hadron/keymaps/default/config.h b/keyboards/hadron/keymaps/default/config.h
index 4a5a8fad3..0f349ad93 100644
--- a/keyboards/hadron/keymaps/default/config.h
+++ b/keyboards/hadron/keymaps/default/config.h
@@ -9,6 +9,7 @@
 
 #define USE_I2C
 #define SSD1306OLED
+#define OLED_ROTATE180
 
 /* ws2812 RGB LED*/
 #define RGB_DI_PIN D4
diff --git a/keyboards/hadron/keymaps/default/keymap.c b/keyboards/hadron/keymaps/default/keymap.c
index 24fa0b27f..01cc8abab 100644
--- a/keyboards/hadron/keymaps/default/keymap.c
+++ b/keyboards/hadron/keymaps/default/keymap.c
@@ -406,3 +406,91 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
     return MACRO_NONE;
 }
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case L_BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case L_RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case L_LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case L_ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+  
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}
+
diff --git a/keyboards/hadron/keymaps/side_numpad/config.h b/keyboards/hadron/keymaps/side_numpad/config.h
index 4a5a8fad3..0f349ad93 100644
--- a/keyboards/hadron/keymaps/side_numpad/config.h
+++ b/keyboards/hadron/keymaps/side_numpad/config.h
@@ -9,6 +9,7 @@
 
 #define USE_I2C
 #define SSD1306OLED
+#define OLED_ROTATE180
 
 /* ws2812 RGB LED*/
 #define RGB_DI_PIN D4
diff --git a/keyboards/hadron/keymaps/side_numpad/keymap.c b/keyboards/hadron/keymaps/side_numpad/keymap.c
index cfe6cc539..a5ccfd022 100644
--- a/keyboards/hadron/keymaps/side_numpad/keymap.c
+++ b/keyboards/hadron/keymaps/side_numpad/keymap.c
@@ -416,3 +416,90 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
     return MACRO_NONE;
 }
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case L_BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case L_RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case L_LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case L_ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+  
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}
diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h
index c7cbc9372..57ed7d763 100644
--- a/keyboards/lets_split/keymaps/OLED_sample/config.h
+++ b/keyboards/lets_split/keymaps/OLED_sample/config.h
@@ -36,6 +36,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define FLIP_HALF
 
 #define SSD1306OLED
+//#define OLED_ROTATE180
 
 
 #define PREVENT_STUCK_MODIFIERS
diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
index ad32269c8..9553309f8 100644
--- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c
+++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c
@@ -358,6 +358,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
     return MACRO_NONE;
 }
 
+
 void matrix_update(struct CharacterMatrix *dest,
                           const struct CharacterMatrix *source) {
   if (memcmp(dest->display, source->display, sizeof(dest->display))) {
@@ -366,6 +367,17 @@ void matrix_update(struct CharacterMatrix *dest,
   }
 }
 
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
 void iota_gfx_task_user(void) {
 #if DEBUG_TO_SCREEN
   if (debug_enable) {
@@ -408,18 +420,16 @@ void iota_gfx_task_user(void) {
   snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
   matrix_write_P(&matrix, PSTR("\n\nLayer: "));
     switch (layer_state) {
-        case _QWERTY:
-        case _COLEMAK:
-        case _DVORAK:
+        case L_BASE:
            matrix_write_P(&matrix, PSTR("Default"));
            break;
-        case _RAISE:
+        case L_RAISE:
            matrix_write_P(&matrix, PSTR("Raise"));
            break;
-        case _LOWER:
+        case L_LOWER:
            matrix_write_P(&matrix, PSTR("Lower"));
            break;
-        case _ADJUST:
+        case L_ADJUST:
            matrix_write_P(&matrix, PSTR("ADJUST"));
            break;
         default:
-- 
cgit v1.2.3-70-g09d2


From 21b63d924327ac404b8592d3c07b3695eb3e235f Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Fri, 14 Jul 2017 21:24:58 -0400
Subject: Updated i2c and serial files to most recent from the lets split
 firmware. Also updated that_canadian keymap

---
 keyboards/minidox/i2c.h                          | 20 +++++++++++++++++++-
 keyboards/minidox/keymaps/that_canadian/config.h |  2 ++
 keyboards/minidox/keymaps/that_canadian/keymap.c |  4 ++--
 keyboards/minidox/matrix.c                       |  2 --
 keyboards/minidox/rev1/config.h                  |  2 +-
 keyboards/minidox/split_util.c                   |  6 +++++-
 keyboards/minidox/split_util.h                   |  2 ++
 7 files changed, 31 insertions(+), 7 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/minidox/i2c.h b/keyboards/minidox/i2c.h
index 08ce4b009..c15b6bc50 100644
--- a/keyboards/minidox/i2c.h
+++ b/keyboards/minidox/i2c.h
@@ -16,7 +16,7 @@
 #define SLAVE_BUFFER_SIZE 0x10
 
 // i2c SCL clock frequency
-#define SCL_CLOCK  100000L
+#define SCL_CLOCK  400000L
 
 extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
 
@@ -28,4 +28,22 @@ uint8_t i2c_master_read(int);
 void i2c_reset_state(void);
 void i2c_slave_init(uint8_t address);
 
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
 #endif
diff --git a/keyboards/minidox/keymaps/that_canadian/config.h b/keyboards/minidox/keymaps/that_canadian/config.h
index 7a8193e08..aad7ed1e6 100644
--- a/keyboards/minidox/keymaps/that_canadian/config.h
+++ b/keyboards/minidox/keymaps/that_canadian/config.h
@@ -25,6 +25,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define USE_SERIAL
 
+#define EE_HANDS
+
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D7
 #define RGBLIGHT_TIMER
diff --git a/keyboards/minidox/keymaps/that_canadian/keymap.c b/keyboards/minidox/keymaps/that_canadian/keymap.c
index da9905346..bc4e66fd8 100644
--- a/keyboards/minidox/keymaps/that_canadian/keymap.c
+++ b/keyboards/minidox/keymaps/that_canadian/keymap.c
@@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |   Z  |   X  |   C  |   V  |   B  |           |   N  |   M  |   ,  |   .  |   /  |
  * `----------------------------------'           `----------------------------------'
  *                  ,--------------------.    ,------,-------------.
- *                  | Ctrl | LOWER|      |    |      | RAISE| Shift|
+ *                  | Shift| LOWER|      |    |      | RAISE| Ctrl |
  *                  `-------------| Space|    |BckSpc|------+------.
  *                                |      |    |      |
  *                                `------'    `------'
@@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    \
   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, \
   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,         KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, \
-                    KC_LCTL, LOWER, KC_SPC,         KC_BSPC, RAISE, OSM(MOD_LSFT)                 \
+                    OSM(MOD_LSFT), LOWER, KC_SPC,         KC_BSPC, RAISE, KC_LCTL                 \
 ),
 
 /* Raise
diff --git a/keyboards/minidox/matrix.c b/keyboards/minidox/matrix.c
index 138969004..81dfb1445 100644
--- a/keyboards/minidox/matrix.c
+++ b/keyboards/minidox/matrix.c
@@ -226,9 +226,7 @@ uint8_t matrix_scan(void)
         TXLED0;
         error_count = 0;
     }
-
     matrix_scan_quantum();
-
     return ret;
 }
 
diff --git a/keyboards/minidox/rev1/config.h b/keyboards/minidox/rev1/config.h
index a858a5b90..9799c4199 100644
--- a/keyboards/minidox/rev1/config.h
+++ b/keyboards/minidox/rev1/config.h
@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define USE_SERIAL
 
-// #define EE_HANDS
+//#define EE_HANDS
 
 #define I2C_MASTER_LEFT
 //#define I2C_MASTER_RIGHT
diff --git a/keyboards/minidox/split_util.c b/keyboards/minidox/split_util.c
index 461921798..39639c3b4 100644
--- a/keyboards/minidox/split_util.c
+++ b/keyboards/minidox/split_util.c
@@ -21,7 +21,8 @@ static void setup_handedness(void) {
   #ifdef EE_HANDS
     isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
   #else
-    #ifdef I2C_MASTER_RIGHT
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
       isLeftHand = !has_usb();
     #else
       isLeftHand = has_usb();
@@ -32,6 +33,9 @@ static void setup_handedness(void) {
 static void keyboard_master_setup(void) {
 #ifdef USE_I2C
     i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+#endif
 #else
     serial_master_init();
 #endif
diff --git a/keyboards/minidox/split_util.h b/keyboards/minidox/split_util.h
index 6b896679c..3ae76c209 100644
--- a/keyboards/minidox/split_util.h
+++ b/keyboards/minidox/split_util.h
@@ -19,4 +19,6 @@ void split_keyboard_setup(void);
 bool has_usb(void);
 void keyboard_slave_loop(void);
 
+void matrix_master_OLED_init (void);
+
 #endif
-- 
cgit v1.2.3-70-g09d2


From 5e8594db821fbae9e76f9fb2516b30636d074003 Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Fri, 14 Jul 2017 21:57:41 -0400
Subject: Updated MiniDox readme

---
 keyboards/minidox/readme.md | 64 +++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 62 insertions(+), 2 deletions(-)

(limited to 'keyboards')

diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md
index f6227386d..d9d551b80 100644
--- a/keyboards/minidox/readme.md
+++ b/keyboards/minidox/readme.md
@@ -1,5 +1,5 @@
-ECO
-===
+MiniDox
+=====
 
 ![MimiDox](http://i.imgur.com/iWb3yO0.jpg)
 
@@ -13,3 +13,63 @@ Make example for this keyboard (after setting up your build environment):
     make minidox-rev1-default
 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Build Guide
+
+A build guide for putting together the MiniDox v1 can be found here: [MiniDox Build Log / Guide](http://imgur.com/a/vImo6)
+
+Flashing
+-------
+Note: Most of this is copied from the Let's Split readme, because it is awesome
+
+From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+Example: `make rev2-default-avrdude`
+
+Choosing which board to plug the USB cable into (choosing Master)
+--------
+Because the two boards are identical, the firmware has logic to differentiate the left and right board.
+
+It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable.
+
+The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
+
+The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
+
+### Setting the left hand as master
+If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
+
+### Setting the right hand as master
+If you always plug the usb cable into the right board, add an extra flag to your `config.h`
+```
+ #define MASTER_RIGHT
+```
+
+### Setting EE_hands to use either hands as master
+If you define `EE_HANDS` in your `config.h`, you will need to set the
+EEPROM for the left and right halves.
+
+The EEPROM is used to store whether the
+half is left handed or right handed. This makes it so that the same firmware
+file will run on both hands instead of having to flash left and right handed
+versions of the firmware to each half. To flash the EEPROM file for the left
+half run:
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
+// or the equivalent in dfu-programmer
+
+```
+and similarly for right half
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
+// or the equivalent in dfu-programmer
+```
+
+NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
+
+After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
+
+Note that you need to program both halves, but you have the option of using
+different keymaps for each half. You could program the left half with a QWERTY
+layout and the right half with a Colemak layout using bootmagic's default layout option.
+Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
+right half is connected.
-- 
cgit v1.2.3-70-g09d2


From b6d74b9bb90303f11796b8ccf8b98e2f532351ac Mon Sep 17 00:00:00 2001
From: That-Canadian <poole.chris.11@gmail.com>
Date: Fri, 14 Jul 2017 21:58:59 -0400
Subject: Fixed typo in readme

---
 keyboards/minidox/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'keyboards')

diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md
index d9d551b80..da8971486 100644
--- a/keyboards/minidox/readme.md
+++ b/keyboards/minidox/readme.md
@@ -23,7 +23,7 @@ Flashing
 Note: Most of this is copied from the Let's Split readme, because it is awesome
 
 From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
-Example: `make rev2-default-avrdude`
+Example: `make rev1-default-avrdude`
 
 Choosing which board to plug the USB cable into (choosing Master)
 --------
-- 
cgit v1.2.3-70-g09d2