From cf4575b94a3c65e6535a159fc71fc885aebc2620 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 2 Aug 2019 14:02:40 -0700 Subject: Fix the LUFA lib to use a submodule instead of just files (#6245) * Remove LUFA files * Update descriptions for newer version of LUFA * Create PR6245.md * Fix CDC(Serial) type errors * Fix missed merge conflict for AUDIO_DTYPE_CSInterface --- lib/lufa/Projects/Benito/Benito.txt | 106 ------------------------------------ 1 file changed, 106 deletions(-) delete mode 100644 lib/lufa/Projects/Benito/Benito.txt (limited to 'lib/lufa/Projects/Benito/Benito.txt') diff --git a/lib/lufa/Projects/Benito/Benito.txt b/lib/lufa/Projects/Benito/Benito.txt deleted file mode 100644 index 07bec52b3..000000000 --- a/lib/lufa/Projects/Benito/Benito.txt +++ /dev/null @@ -1,106 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Benito Arduino Programmer Project - * - * \section Sec_Compat Project Compatibility: - * - * The following list indicates what microcontrollers are compatible with this project. - * - * \li Series 7 USB AVRs (AT90USBxxx7) - * \li Series 6 USB AVRs (AT90USBxxx6) - * \li Series 4 USB AVRs (ATMEGAxxU4) - * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this project. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard \n - * Arduino Bootloader Specification
Supported USB Speeds:Full Speed Mode
- * - * \section Sec_Description Project Description: - * - * Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This - * project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse - * to appear on a given port pin, to control the target's /RESET pin. - * - * This is primarily designed to fit the Benito board from www.dorkbotpdx.org, but will suit all USB AVRs. - * - * After running this project for the first time on a new computer, you will need to supply the .INF file located - * in this project's directory as the device's driver when running under Windows. This will enable Windows to use - * its inbuilt CDC drivers, negating the need for custom drivers for the device. Other Operating Systems should - * automatically use their own inbuilt CDC-ACM drivers. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Define Name:Location:Description:
AVR_RESET_LINE_PORTAppConfig.hIndicates the PORT register of the pin used to generate the target /RESET line pulse.
AVR_RESET_LINE_DDRAppConfig.hIndicates the DDR register of the pin used to generate the target /RESET line pulse.
AVR_RESET_LINE_MASKAppConfig.hIndicates the mask of the pin used to generate the target /RESET line pulse.
AVR_RESET_PULSE_MSAppConfig.hPulse length in milliseconds for the target /RESET pulse.
TX_RX_LED_PULSE_MSAppConfig.hPulse length in milliseconds for the activity Tx/Rx LEDs.
PING_PONG_LED_PULSE_MSAppConfig.hPulse length in milliseconds for the enumeration LED ping-ponging between toggles.
RECEIVE_BUFFER_FLUSH_MSAppConfig.hPeriod between flushings of received data buffer to the attached USB host.
- */ - -- cgit v1.2.3-70-g09d2