From b624f32f944acdc59dcb130674c09090c5c404cb Mon Sep 17 00:00:00 2001 From: skullY Date: Fri, 30 Aug 2019 11:19:03 -0700 Subject: clang-format changes --- quantum/dynamic_macro.h | 137 +++++++++++++++++++----------------------------- 1 file changed, 55 insertions(+), 82 deletions(-) (limited to 'quantum/dynamic_macro.h') diff --git a/quantum/dynamic_macro.h b/quantum/dynamic_macro.h index 07cba19f6..c7632c004 100644 --- a/quantum/dynamic_macro.h +++ b/quantum/dynamic_macro.h @@ -30,7 +30,7 @@ * there have been reports of it being too much in some users' cases, * so 128 is considered a safe default. */ -#define DYNAMIC_MACRO_SIZE 128 +# define DYNAMIC_MACRO_SIZE 128 #endif /* DYNAMIC_MACRO_RANGE must be set as the last element of user's @@ -46,8 +46,7 @@ enum dynamic_macro_keycodes { }; /* Blink the LEDs to notify the user about some event. */ -void dynamic_macro_led_blink(void) -{ +void dynamic_macro_led_blink(void) { #ifdef BACKLIGHT_ENABLE backlight_toggle(); wait_ms(100); @@ -59,10 +58,8 @@ void dynamic_macro_led_blink(void) * need a `direction` variable accessible at the call site. */ #define DYNAMIC_MACRO_CURRENT_SLOT() (direction > 0 ? 1 : 2) -#define DYNAMIC_MACRO_CURRENT_LENGTH(BEGIN, POINTER) \ - ((int)(direction * ((POINTER) - (BEGIN)))) -#define DYNAMIC_MACRO_CURRENT_CAPACITY(BEGIN, END2) \ - ((int)(direction * ((END2) - (BEGIN)) + 1)) +#define DYNAMIC_MACRO_CURRENT_LENGTH(BEGIN, POINTER) ((int)(direction * ((POINTER) - (BEGIN)))) +#define DYNAMIC_MACRO_CURRENT_CAPACITY(BEGIN, END2) ((int)(direction * ((END2) - (BEGIN)) + 1)) /** * Start recording of the dynamic macro. @@ -70,9 +67,7 @@ void dynamic_macro_led_blink(void) * @param[out] macro_pointer The new macro buffer iterator. * @param[in] macro_buffer The macro buffer used to initialize macro_pointer. */ -void dynamic_macro_record_start( - keyrecord_t **macro_pointer, keyrecord_t *macro_buffer) -{ +void dynamic_macro_record_start(keyrecord_t **macro_pointer, keyrecord_t *macro_buffer) { dprintln("dynamic macro recording: started"); dynamic_macro_led_blink(); @@ -89,9 +84,7 @@ void dynamic_macro_record_start( * @param macro_end[in] The element after the last macro buffer element. * @param direction[in] Either +1 or -1, which way to iterate the buffer. */ -void dynamic_macro_play( - keyrecord_t *macro_buffer, keyrecord_t *macro_end, int8_t direction) -{ +void dynamic_macro_play(keyrecord_t *macro_buffer, keyrecord_t *macro_end, int8_t direction) { dprintf("dynamic macro: slot %d playback\n", DYNAMIC_MACRO_CURRENT_SLOT()); uint32_t saved_layer_state = layer_state; @@ -118,13 +111,7 @@ void dynamic_macro_play( * @param direction[in] Either +1 or -1, which way to iterate the buffer. * @param record[in] The current keypress. */ -void dynamic_macro_record_key( - keyrecord_t *macro_buffer, - keyrecord_t **macro_pointer, - keyrecord_t *macro2_end, - int8_t direction, - keyrecord_t *record) -{ +void dynamic_macro_record_key(keyrecord_t *macro_buffer, keyrecord_t **macro_pointer, keyrecord_t *macro2_end, int8_t direction, keyrecord_t *record) { /* If we've just started recording, ignore all the key releases. */ if (!record->event.pressed && *macro_pointer == macro_buffer) { dprintln("dynamic macro: ignoring a leading key-up event"); @@ -141,38 +128,25 @@ void dynamic_macro_record_key( dynamic_macro_led_blink(); } - dprintf( - "dynamic macro: slot %d length: %d/%d\n", - DYNAMIC_MACRO_CURRENT_SLOT(), - DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, *macro_pointer), - DYNAMIC_MACRO_CURRENT_CAPACITY(macro_buffer, macro2_end)); + dprintf("dynamic macro: slot %d length: %d/%d\n", DYNAMIC_MACRO_CURRENT_SLOT(), DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, *macro_pointer), DYNAMIC_MACRO_CURRENT_CAPACITY(macro_buffer, macro2_end)); } /** * End recording of the dynamic macro. Essentially just update the * pointer to the end of the macro. */ -void dynamic_macro_record_end( - keyrecord_t *macro_buffer, - keyrecord_t *macro_pointer, - int8_t direction, - keyrecord_t **macro_end) -{ +void dynamic_macro_record_end(keyrecord_t *macro_buffer, keyrecord_t *macro_pointer, int8_t direction, keyrecord_t **macro_end) { dynamic_macro_led_blink(); /* Do not save the keys being held when stopping the recording, * i.e. the keys used to access the layer DYN_REC_STOP is on. */ - while (macro_pointer != macro_buffer && - (macro_pointer - direction)->event.pressed) { + while (macro_pointer != macro_buffer && (macro_pointer - direction)->event.pressed) { dprintln("dynamic macro: trimming a trailing key-down event"); macro_pointer -= direction; } - dprintf( - "dynamic macro: slot %d saved, length: %d\n", - DYNAMIC_MACRO_CURRENT_SLOT(), - DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, macro_pointer)); + dprintf("dynamic macro: slot %d saved, length: %d\n", DYNAMIC_MACRO_CURRENT_SLOT(), DYNAMIC_MACRO_CURRENT_LENGTH(macro_buffer, macro_pointer)); *macro_end = macro_pointer; } @@ -187,8 +161,7 @@ void dynamic_macro_record_end( * <...THE REST OF THE FUNCTION...> * } */ -bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record) -{ +bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record) { /* Both macros use the same buffer but read/write on different * ends of it. * @@ -239,57 +212,57 @@ bool process_record_dynamic_macro(uint16_t keycode, keyrecord_t *record) /* No macro recording in progress. */ if (!record->event.pressed) { switch (keycode) { - case DYN_REC_START1: - dynamic_macro_record_start(¯o_pointer, macro_buffer); - macro_id = 1; - return false; - case DYN_REC_START2: - dynamic_macro_record_start(¯o_pointer, r_macro_buffer); - macro_id = 2; - return false; - case DYN_MACRO_PLAY1: - dynamic_macro_play(macro_buffer, macro_end, +1); - return false; - case DYN_MACRO_PLAY2: - dynamic_macro_play(r_macro_buffer, r_macro_end, -1); - return false; + case DYN_REC_START1: + dynamic_macro_record_start(¯o_pointer, macro_buffer); + macro_id = 1; + return false; + case DYN_REC_START2: + dynamic_macro_record_start(¯o_pointer, r_macro_buffer); + macro_id = 2; + return false; + case DYN_MACRO_PLAY1: + dynamic_macro_play(macro_buffer, macro_end, +1); + return false; + case DYN_MACRO_PLAY2: + dynamic_macro_play(r_macro_buffer, r_macro_end, -1); + return false; } } } else { /* A macro is being recorded right now. */ switch (keycode) { - case DYN_REC_STOP: - /* Stop the macro recording. */ - if (record->event.pressed) { /* Ignore the initial release - * just after the recoding - * starts. */ + case DYN_REC_STOP: + /* Stop the macro recording. */ + if (record->event.pressed) { /* Ignore the initial release + * just after the recoding + * starts. */ + switch (macro_id) { + case 1: + dynamic_macro_record_end(macro_buffer, macro_pointer, +1, ¯o_end); + break; + case 2: + dynamic_macro_record_end(r_macro_buffer, macro_pointer, -1, &r_macro_end); + break; + } + macro_id = 0; + } + return false; + case DYN_MACRO_PLAY1: + case DYN_MACRO_PLAY2: + dprintln("dynamic macro: ignoring macro play key while recording"); + return false; + default: + /* Store the key in the macro buffer and process it normally. */ switch (macro_id) { - case 1: - dynamic_macro_record_end(macro_buffer, macro_pointer, +1, ¯o_end); - break; - case 2: - dynamic_macro_record_end(r_macro_buffer, macro_pointer, -1, &r_macro_end); - break; + case 1: + dynamic_macro_record_key(macro_buffer, ¯o_pointer, r_macro_end, +1, record); + break; + case 2: + dynamic_macro_record_key(r_macro_buffer, ¯o_pointer, macro_end, -1, record); + break; } - macro_id = 0; - } - return false; - case DYN_MACRO_PLAY1: - case DYN_MACRO_PLAY2: - dprintln("dynamic macro: ignoring macro play key while recording"); - return false; - default: - /* Store the key in the macro buffer and process it normally. */ - switch (macro_id) { - case 1: - dynamic_macro_record_key(macro_buffer, ¯o_pointer, r_macro_end, +1, record); - break; - case 2: - dynamic_macro_record_key(r_macro_buffer, ¯o_pointer, macro_end, -1, record); + return true; break; - } - return true; - break; } } -- cgit v1.2.3-70-g09d2