Update the README and create an INSTALL file.

Let the README contain generic information and move the build
instructions to the INSTALL file.

Signed-off-by: Thiago Macieira <thiago@macieira.org>

1 files changed, 0 insertions, 172 deletions

diff --git a/README b/README
index 1b9f08d8b..11d7d3f6c 100644
--- a/README
+++ b/README
@@ -11,89 +11,6 @@ will get you the latest version of the fully functional Subsurface.
 
 git checkout Gtk
 
-If you are indeed planning to work on the Qt version, here are some
-pointers to get you started:
-
-Building the Qt version under Linux
------------------------------------
-
-On Debian you need libqt4-dev, libmarble-dev, libzip-dev.
-Unfortunately the marble version in Debian stable (and possibly
-Ubuntu) appears broken and missing essential header files used in the
-current git version of Subsurface. We hack around this right now by
-including this header file but this needs to be revisited before an
-actual release.
-
-On Fedora you need qt-devel, marble-devel, libzip-devel.
-
-Building the Qt version under MacOSX
-------------------------------------
-
-You might have built MacPorts packages with +quartz dependencies to
-build the previous Subsurface/Gtk version.  Switch to the +x11
-dependencies and prepare your system for Subsurface/Qt by doing:
-
-sudo port uninstall gtk-osx-application subsurface libdivecomputer
-sudo port install cairo +x11 pango +x11 py27-pygtk +x11 gtk2 +x11
-sudo port install qt4-mac marble libzip libtool libusb
-
-Then build libdivecomputer and Subsurface as described below.
-
-With the current version (and dependencies of marble), to run subsurface you have to once
-
-sudo port install dbus
-sudo launchctl load -w /Library/LaunchDaemons/org.freedesktop.dbus-system.plist
-launchctl load -w /Library/LaunchAgents/org.freedesktop.dbus-session.plist
-sudo chown -R ${USER} ~/Library/Preferences/KDE
-
-Buildling the Qt version under MacOSX, using dependencies from Homebrew
------------------------------------------------------------------------
-
-1)  Install Homebrew
-
-$ ruby -e "$(curl -fsSL https://raw.github.com/mxcl/homebrew/go)"
-
-2) Install needed dependencies
-
-$ brew install asciidoc libzip qt sqlite cmake libusb pkg-config
-
-3) Make the brew version of sqlite the default
-
-$ brew link --force sqlite
-
-4) Install Marble
-
-$ mkdir -p ~/src/marble/build
-$ git clone -b KDE/4.11 git://anongit.kde.org/marble ~/src/marble/sources
-$ cd ~/src/marble/build
-$ cmake -DCMAKE_BUILD_TYPE=Debug -DQTONLY=TRUE -DCMAKE_INSTALL_PREFIX=/usr/local ~/src/marble/sources
-$ make
-$ sudo make install
-$ cd src/lib
-$ mkdir -p /usr/local/include/marble
-$ cp $(find . -name '*.h') /usr/local/include/marble/
-$ cp *dylib /usr/local/lib/
-
-5) Install Libdivecomputer
-
-$ brew install automake libtool
-$ cd ~/src
-$ git clone git://libdivecomputer.git.sourceforge.net/gitroot/libdivecomputer/libdivecomputer
-$ cd libdivecomputer
-$ git checkout release-0.4
-$ autoreconf --install
-$ ./configure
-$ make
-$ sudo make install
-
-6) Compile Subsurface
-
-$ cd ~/src
-$ git clone git://subsurface.hohndel.org/subsurface.git
-$ cd subsurface
-$ make
-
-
 Subsurface - an Open Source Divelog
 ===================================
 
@@ -154,95 +71,6 @@ can get a tar ball from
 
 http://subsurface.hohndel.org/downloads/Subsurface-3.1.tgz
 
-
-Building subsurface under Linux
--------------------------------
-You need libxml2-devel, libxslt-devel, gtk2-devel, glib2-devel,
-gconf2-devel, libsoup-devel, osm-gps-map-devel, libsqlite3x-devel, and
-libzip-devel to build this (and libusb-1.0 if you have libdivecomputer
-built with it, but then you obviously already have it installed).
-Check with your Linux distribution how to install these packages.
-
-On Debian the package names are different; try libxml2-dev,
-libgtk2.0-dev, libglib2.0-dev, libgconf2-dev, libsoup2.4-dev,
-libosmgpsmap-dev, libsqlite3-dev, libxslt1-dev, libzip-dev,
-zlib1g-dev (and libusb-1.0-0-dev if libdivecomputer is built with it).
-
-Note that contrary to earlier versions of Subsurface, starting in v3.1
-XSLT, LIBZIP and OSMGPSMAP are no longer optional but instead are
-required to build.
-
-You also need to have libdivecomputer installed. The current git
-versions of Subsurface assume that you use libdivecomputer version
-0.4, which goes something like this:
-
-git clone git://git.libdivecomputer.org/libdivecomputer
-cd libdivecomputer
-git checkout release-0.4
-autoreconf --install
-./configure
-make
-sudo make install
-
-NOTE! Sometimes you may need to tell the main Subsurface Makefile where
-you installed libdivecomputer; pkg-config for libdivecomputer doesn't
-always work unless the project has been installed by the distro.
-
-Just edit the makefile directly.
-
-
-Building Subsurface under Windows
----------------------------------
-Subsurface builds nicely with MinGW - the official builds are done as
-cross builds under Linux (currently on Fedora 17). A shell script to do
-that (plus the .nsi file to create the installer with makensis) are
-included in the packaging/Windows directory.
-
-Strangely the developers have failed to make 'https' support work in
-the cross-built Windows binaries. As a workaround at this point the
-cross built Windows binaries use http instead https connections (right
-now this only applies to divelogs.de uploads).
-
-The best way to get libdivecomputer to build appears to be
-
-mingw32-configure
-mingw32-make
-sudo mingw32-make install
-
-Once you have built and installed libdivecomputer you can use
-
-sh packaging/Windows/mingw-make.sh
-
-to then build subsurface. In order to create an installer simply use
-
-sh packaging/Windows/mingw-make.sh create-windows-installer
-
-
-Building subsurface on a Mac
-----------------------------
-Install MacPorts and install the dependencies from MacPorts:
-
-sudo port install libusb libtool libzip qt4-mac marble
-
-Install libdivecomputer:
-git clone git://git.libdivecomputer.org/libdivecomputer
-cd libdivecomputer
-git checkout release-0.4
-autoreconf --install
-LIBUSB_CFLAGS=-I/opt/local/include ./configure
-make
-sudo make install
-
-Install subsurface:
-git clone git://subsurface.hohndel.org/subsurface.git
-cd subsurface
-PKG_CONFIG_PATH="/usr/local/lib/pkgconfig/" make
-sudo make install-macosx
-
-More instructions on how to create a Subsurface DMG can be found in
-packaging/macosx/README
-
-
 Usage:
 ======