Fix up o2 pressure sensor handling at load time

Because of how we traditionally did things, the "o2pressure" parsing
depends on implicitly setting the sensor index to the last cylinder that
was marked as being used for oxygen.

We also always defaulted the primary sensor (which is used for the
diluent tank for CCR) to cylinder 0, but that doesn't work when the
oxygen tank is cylinder 0.

This gets that right at file loading time, and unifies the xml and git
sample parsing to make them match. The new defaults are:

 - unless anything else is explicitly specified, the primary sensor is
   associated with the first tank, and the secondary sensor is
   associated with the second tank

 - if we're a CCR dive, and have an explicit oxygen tank, we associate
   the secondary sensor with that oxygen cylinder.  The primary sensor
   will be switched over to the second cylinder if the oxygen cylinder
   is the first one.

   This may sound backwards, but matches our traditional behavior where
   the O2 pressure was the secondary pressure.

This is definitely not pretty, but it gets our historical files working
right, and is at least reasonably sensible.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>

1 files changed, 35 insertions, 22 deletions

diff --git a/core/parse-xml.c b/core/parse-xml.c
index fdb2dab44..c56a96ddb 100644
--- a/core/parse-xml.c
+++ b/core/parse-xml.c
@@ -150,8 +150,8 @@ static bool in_settings = false;
 static bool in_userid = false;
 static struct tm cur_tm;
 static int cur_cylinder_index, cur_ws_index;
-static int lastndl, laststoptime, laststopdepth, lastcns, lastpo2, lastindeco;
-static int lastcylinderindex, lastsensor, lasto2sensor = 1, next_o2_sensor;
+static int lastcylinderindex, next_o2_sensor;
+static int o2pressure_sensor;
 static struct extra_data cur_extra_data;
 
 /*
@@ -356,7 +356,7 @@ static void cylinder_use(char *buffer, enum cylinderuse *cyl_use)
 		int use = cylinderuse_from_text(buffer);
 		*cyl_use = use;
 		if (use == OXYGEN)
-			lasto2sensor = cur_cylinder_index;
+			o2pressure_sensor = cur_cylinder_index;
 	}
 }
 
@@ -794,7 +794,6 @@ static void get_cylinderindex(char *buffer, uint8_t *i)
 static void get_sensor(char *buffer, uint8_t *i)
 {
 	*i = atoi(buffer);
-	lastsensor = *i;
 }
 
 static void parse_libdc_deco(char *buffer, struct sample *s)
@@ -1526,9 +1525,7 @@ static void reset_dc_info(struct divecomputer *dc)
 {
 	/* WARN: reset dc info does't touch the dc? */
 	(void) dc;
-	lastcns = lastpo2 = lastndl = laststoptime = laststopdepth = lastindeco = 0;
-	lastsensor = lastcylinderindex = 0;
-	lasto2sensor = 1;
+	lastcylinderindex = 0;
 }
 
 static void reset_dc_settings(void)
@@ -1606,6 +1603,7 @@ static void dive_start(void)
 		add_dive_to_trip(cur_dive, cur_trip);
 		cur_dive->tripflag = IN_TRIP;
 	}
+	o2pressure_sensor = 1;
 }
 
 static void dive_end(void)
@@ -1714,17 +1712,38 @@ static void ws_end(void)
 	cur_ws_index++;
 }
 
+/*
+ * By default the sample data does not change unless the
+ * save-file gives an explicit new value. So we copy the
+ * data from the previous sample if one exists, and then
+ * the parsing will update it as necessary.
+ *
+ * There are a few exceptions, like the sample pressure:
+ * missing sample pressure doesn't mean "same as last
+ * time", but "interpolate". We clear those ones
+ * explicitly.
+ *
+ * NOTE! We default sensor use to 0, 1 respetively for
+ * the two sensors, but for CCR dives with explicit
+ * OXYGEN bottles we set the secondary sensor to that.
+ * Then the primary sensor will be either the first
+ * or the second cylinder depending on what isn't an
+ * oxygen cylinder.
+ */
 static void sample_start(void)
 {
-	cur_sample = prepare_sample(get_dc());
-	cur_sample->ndl.seconds = lastndl;
-	cur_sample->in_deco = lastindeco;
-	cur_sample->stoptime.seconds = laststoptime;
-	cur_sample->stopdepth.mm = laststopdepth;
-	cur_sample->cns = lastcns;
-	cur_sample->setpoint.mbar = lastpo2;
-	cur_sample->sensor[0] = lastsensor;
-	cur_sample->sensor[1] = lasto2sensor;
+	struct divecomputer *dc = get_dc();
+	struct sample *sample = prepare_sample(dc);
+
+	if (sample != dc->sample) {
+		memcpy(sample, sample-1, sizeof(struct sample));
+		sample->pressure[0].mbar = 0;
+		sample->pressure[1].mbar = 0;
+	} else {
+		sample->sensor[0] = !o2pressure_sensor;
+		sample->sensor[1] = o2pressure_sensor;
+	}
+	cur_sample = sample;
 	next_o2_sensor = 0;
 }
 
@@ -1734,12 +1753,6 @@ static void sample_end(void)
 		return;
 
 	finish_sample(get_dc());
-	lastndl = cur_sample->ndl.seconds;
-	lastindeco = cur_sample->in_deco;
-	laststoptime = cur_sample->stoptime.seconds;
-	laststopdepth = cur_sample->stopdepth.mm;
-	lastcns = cur_sample->cns;
-	lastpo2 = cur_sample->setpoint.mbar;
 	cur_sample = NULL;
 }