diff options
| -rw-r--r-- | configuredivecomputerthreads.cpp | 250 |
1 files changed, 250 insertions, 0 deletions
diff --git a/configuredivecomputerthreads.cpp b/configuredivecomputerthreads.cpp index 8075076b3..43d0bcbb4 100644 --- a/configuredivecomputerthreads.cpp +++ b/configuredivecomputerthreads.cpp @@ -479,24 +479,274 @@ void ReadSettingsThread::run() case DC_FAMILY_HW_OSTC: { supported = true; unsigned char data[256] = {}; + unsigned char max_CF = 0; rc = hw_ostc_device_eeprom_read(m_data->device, 0, data, sizeof(data)); if (rc == DC_STATUS_SUCCESS) { + m_deviceDetails->setSerialNo(QString::number(data[1] << 8 ^ data[0])); + m_deviceDetails->setNumberOfDives(data[3] << 8 ^ data[2]); + //Byte5-6: + //Gas 1 default (%O2=21, %He=0) + gas gas1; + gas1.oxygen = data[6]; + gas1.helium = data[7]; + //Byte9-10: + //Gas 2 default (%O2=21, %He=0) + gas gas2; + gas2.oxygen = data[10]; + gas2.helium = data[11]; + //Byte13-14: + //Gas 3 default (%O2=21, %He=0) + gas gas3; + gas3.oxygen = data[14]; + gas3.helium = data[15]; + //Byte17-18: + //Gas 4 default (%O2=21, %He=0) + gas gas4; + gas4.oxygen = data[18]; + gas4.helium = data[19]; + //Byte21-22: + //Gas 5 default (%O2=21, %He=0) + gas gas5; + gas5.oxygen = data[22]; + gas5.helium = data[23]; + //Byte25-26: + //Gas 6 current (%O2, %He) + m_deviceDetails->setSalinity(data[26]); + // Active Gas Flag Register + gas1.type = data[27] & 0x01; + gas2.type = (data[27] & 0x02) >> 1; + gas3.type = (data[27] & 0x04) >> 2; + gas4.type = (data[27] & 0x08) >> 3; + gas5.type = (data[27] & 0x10) >> 4; + + gas1.depth = data[28]; + gas2.depth = data[29]; + gas3.depth = data[30]; + gas4.depth = data[31]; + gas5.depth = data[32]; + // 33 which gas is Fist gas + switch(data[33]) { + case 1: + gas1.type = 2; + break; + case 2: + gas2.type = 2; + break; + case 3: + gas3.type = 2; + break; + case 4: + gas4.type = 2; + break; + case 5: + gas5.type = 2; + break; + default: + //Error? + break; + } + // Data filled up, set the gases. + m_deviceDetails->setGas1(gas1); + m_deviceDetails->setGas2(gas2); + m_deviceDetails->setGas3(gas3); + m_deviceDetails->setGas4(gas4); + m_deviceDetails->setGas5(gas5); + m_deviceDetails->setDecoType(data[34]); + //Byte36: + //Use O2 Sensor Module in CC Modes (0= OFF, 1= ON) (Only available in old OSTC1 - unused for OSTC Mk.2/2N) + //m_deviceDetails->setCcrMode(data[35]); + setpoint sp1; + sp1.sp = data[36]; + sp1.depth = 0; + setpoint sp2; + sp2.sp = data[37]; + sp2.depth = 0; + setpoint sp3; + sp3.sp = data[38]; + sp3.depth = 0; + m_deviceDetails->setSp1(sp1); + m_deviceDetails->setSp2(sp2); + m_deviceDetails->setSp3(sp3); + // Byte41-42: + // Lowest Battery voltage seen (in mV) + // Byte43: + // Lowest Battery voltage seen at (Month) + // Byte44: + // Lowest Battery voltage seen at (Day) + // Byte45: + // Lowest Battery voltage seen at (Year) + // Byte46-47: + // Lowest Battery voltage seen at (Temperature in 0.1 °C) + // Byte48: + // Last complete charge at (Month) + // Byte49: + // Last complete charge at (Day) + // Byte50: + // Last complete charge at (Year) + // Byte51-52: + // Total charge cycles + // Byte53-54: + // Total complete charge cycles + // Byte55-56: + // Temperature Extrema minimum (Temperature in 0.1 °C) + // Byte57: + // Temperature Extrema minimum at (Month) + // Byte58: + // Temperature Extrema minimum at (Day) + // Byte59: + // Temperature Extrema minimum at (Year) + // Byte60-61: + // Temperature Extrema maximum (Temperature in 0.1 °C) + // Byte62: + // Temperature Extrema maximum at (Month) + // Byte63: + // Temperature Extrema maximum at (Day) + // Byte64: + // Temperature Extrema maximum at (Year) + // Byte65: + // Custom Text active (=1), Custom Text Disabled (<>1) + // Byte66-90: + // TO FIX EDITOR SYNTAX/INDENT { + // (25Bytes): Custom Text for Surfacemode (Real text must end with "}") + // Example: OSTC Dive Computer} (19 Characters incl. "}") Bytes 85-90 will be ignored. + if (data[64] == 1) { + // Make shure the data is null-terminated + data[89] = 0; + // Find the internal termination and replace it with 0 + char *term = strchr((char *) data + 65, (int)'}'); + if (term) + *term = 0; + m_deviceDetails->setCustomText((const char*) data + 65); + } + // Byte91: + // Dim OLED in Divemode (>0), Normal mode (=0) + // Byte92: + // Date format for all outputs: + // =0: MM/DD/YY + // =1: DD/MM/YY + // =2: YY/MM/DD + m_deviceDetails->setDateFormat(data[91]); + // Byte93: + // Total number of CF used in installed firmware + max_CF = data[92]; + // Byte94: + // Last selected view for customview area in surface mode + // Byte95: + // Last selected view for customview area in dive mode + // Byte96-97: + // Diluent 1 Default (%O2,%He) + // Byte98-99: + // Diluent 1 Current (%O2,%He) + gas dil1 = {}; + dil1.oxygen = data[97]; + dil1.helium = data[98]; + // Byte100-101: + // Gasuent 2 Default (%O2,%He) + // Byte102-103: + // Gasuent 2 Current (%O2,%He) + gas dil2 = {}; + dil2.oxygen = data[101]; + dil2.helium = data[102]; + // Byte104-105: + // Gasuent 3 Default (%O2,%He) + // Byte106-107: + // Gasuent 3 Current (%O2,%He) + gas dil3 = {}; + dil3.oxygen = data[105]; + dil3.helium = data[106]; + // Byte108-109: + // Gasuent 4 Default (%O2,%He) + // Byte110-111: + // Gasuent 4 Current (%O2,%He) + gas dil4 = {}; + dil4.oxygen = data[109]; + dil4.helium = data[110]; + // Byte112-113: + // Gasuent 5 Default (%O2,%He) + // Byte114-115: + // Gasuent 5 Current (%O2,%He) + gas dil5 = {}; + dil5.oxygen = data[113]; + dil5.helium = data[114]; + // Byte116: + // First Diluent (1-5) + switch(data[115]) { + case 1: + dil1.type = 2; + break; + case 2: + dil2.type = 2; + break; + case 3: + dil3.type = 2; + break; + case 4: + dil4.type = 2; + break; + case 5: + dil5.type = 2; + break; + default: + //Error? + break; + } + m_deviceDetails->setDil1(dil1); + m_deviceDetails->setDil2(dil2); + m_deviceDetails->setDil3(dil3); + m_deviceDetails->setDil4(dil4); + m_deviceDetails->setDil5(dil5); + // Byte117-128: + // not used/reserved + // Byte129-256: + // 32 custom Functions (CF0-CF31) + // The custom functions are stored in the internal EEPROM after 0x080 + // Any custom function occupies 4 byte: + // 2 byte (low:high) store the default value, reset from menu "reset" (Will be overwritten by hard-coded defaults if reset in the unit!) + // 2 byte (low:high) store the actual value #ifdef DEBUG_OSTC local_hw_ostc_device_eeprom_write(m_data->device, 0, data, sizeof(data)); #endif } rc = hw_ostc_device_eeprom_read(m_data->device, 1, data, sizeof(data)); if (rc == DC_STATUS_SUCCESS) { + // Byte1: + // Logbook version indicator (Not writable!) + // Byte2-3: + // Last Firmware installed, 1st Byte.2nd Byte (e.g. „1.90“) (Not writable!) + m_deviceDetails->setFirmwareVersion(QString::number(data[1]) + "." + QString::number(data[2])); + // Byte4: + // OLED brightness (=0: Eco, =1 High) (Not writable!) + // Byte5-11: + // Time/Date vault during firmware updates + // Byte12-128 + // not used/reserved + // Byte129-256: + // 32 custom Functions (CF 32-63) + // The custom functions are stored in the internal EEPROM after 0x180 + // Any custom function occupies 4 byte: + // 2 byte (low:high) store the default value, reset from menu "reset" (Will be overwritten by hard-coded defaults if reset in the unit!) + // 2 byte (low:high) store the actual value #ifdef DEBUG_OSTC local_hw_ostc_device_eeprom_write(m_data->device, 1, data, sizeof(data)); #endif } rc = hw_ostc_device_eeprom_read(m_data->device, 2, data, sizeof(data)); if (rc == DC_STATUS_SUCCESS) { + // Byte1-4: + // not used/reserved (Not writable!) + // Byte5-128: + // not used/reserved + // Byte129-256: + // 32 custom Functions (CF 64-95) + // The custom functions are stored in the internal EEPROM after 0x280 + // Any custom function occupies 4 byte: + // 2 byte (low:high) store the default value, reset from menu "reset" (Will be overwritten by hard-coded defaults if reset in the unit!) + // 2 byte (low:high) store the actual value #ifdef DEBUG_OSTC local_hw_ostc_device_eeprom_write(m_data->device, 2, data, sizeof(data)); #endif } + emit devicedetails(m_deviceDetails); break; } #endif // divecomputer 0.5.0 |