summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--configuredivecomputerthreads.cpp167
1 files changed, 165 insertions, 2 deletions
diff --git a/configuredivecomputerthreads.cpp b/configuredivecomputerthreads.cpp
index 75544672a..6f0ff9a93 100644
--- a/configuredivecomputerthreads.cpp
+++ b/configuredivecomputerthreads.cpp
@@ -44,6 +44,25 @@
#define OSTC3_PRESSURE_SENSOR_OFFSET 0x35
#define OSTC3_SAFETY_STOP 0x36
+#define SUUNTO_VYPER_MAXDEPTH 0x1e
+#define SUUNTO_VYPER_TOTAL_TIME 0x20
+#define SUUNTO_VYPER_NUMBEROFDIVES 0x22
+#define SUUNTO_VYPER_COMPUTER_TYPE 0x24
+#define SUUNTO_VYPER_FIRMWARE 0x25
+#define SUUNTO_VYPER_SERIALNUMBER 0x26
+#define SUUNTO_VYPER_CUSTOM_TEXT 0x2c
+#define SUUNTO_VYPER_SAMPLING_RATE 0x53
+#define SUUNTO_VYPER_ALTITUDE_SAFETY 0x54
+#define SUUNTO_VYPER_TIMEFORMAT 0x60
+#define SUUNTO_VYPER_UNITS 0x62
+#define SUUNTO_VYPER_MODEL 0x63
+#define SUUNTO_VYPER_LIGHT 0x64
+#define SUUNTO_VYPER_ALARM_DEPTH_TIME 0x65
+#define SUUNTO_VYPER_ALARM_TIME 0x66
+#define SUUNTO_VYPER_ALARM_DEPTH 0x68
+#define SUUNTO_VYPER_CUSTOM_TEXT_LENGHT 30
+
+
ReadSettingsThread::ReadSettingsThread(QObject *parent, device_data_t *data)
: QThread(parent), m_data(data)
{
@@ -57,8 +76,112 @@ void ReadSettingsThread::run()
rc = dc_device_open(&m_data->device, m_data->context, m_data->descriptor, m_data->devname);
if (rc == DC_STATUS_SUCCESS) {
DeviceDetails *m_deviceDetails = new DeviceDetails(0);
+ switch (dc_device_get_type(m_data->device)) {
+ case DC_FAMILY_SUUNTO_VYPER:
+ supported = true;
+ unsigned char data[SUUNTO_VYPER_CUSTOM_TEXT_LENGHT + 1];
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_MAXDEPTH, data, 2);
+ if (rc == DC_STATUS_SUCCESS) {
+ // in ft * 128.0
+ int depth = feet_to_mm(data[0] << 8 ^ data[1]) / 128;
+ m_deviceDetails->setMaxDepth(depth);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_TOTAL_TIME, data, 2);
+ if (rc == DC_STATUS_SUCCESS) {
+ int total_time = data[0] << 8 ^ data[1];
+ m_deviceDetails->setTotalTime(total_time);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_NUMBEROFDIVES, data, 2);
+ if (rc == DC_STATUS_SUCCESS) {
+ int number_of_dives = data[0] << 8 ^ data[1];
+ m_deviceDetails->setNumberOfDives(number_of_dives);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_COMPUTER_TYPE, data, 1);
+ if (rc == DC_STATUS_SUCCESS) {
+ const char *model;
+ switch(data[0]) {
+ case 0x03:
+ model = "Stinger";
+ break;
+ case 0x04:
+ model = "Mosquito";
+ break;
+ case 0x0A:
+ model = "new Vyper";
+ break;
+ case 0x0C:
+ model = "Vyper or Cobra";
+ break;
+ case 0x0B:
+ model = "Vytec";
+ break;
+ case 0x0D:
+ model = "Gekko";
+ break;
+ default:
+ model = "UNKNOWN";
+ }
+ m_deviceDetails->setModel(model);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_FIRMWARE, data, 1);
+ if (rc == DC_STATUS_SUCCESS) {
+ m_deviceDetails->setFirmwareVersion(QString::number(data[0]) + ".0.0");
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_SERIALNUMBER, data, 4);
+ if (rc == DC_STATUS_SUCCESS) {
+ int serial_number = data[0] * 1000000 + data[1] * 10000 + data[2] * 100 + data[3];
+ m_deviceDetails->setSerialNo(QString::number(serial_number));
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_CUSTOM_TEXT, data, SUUNTO_VYPER_CUSTOM_TEXT_LENGHT);
+ if (rc == DC_STATUS_SUCCESS) {
+ data[SUUNTO_VYPER_CUSTOM_TEXT_LENGHT] = 0;
+ m_deviceDetails->setCustomText((const char*) data);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_SAMPLING_RATE, data, 1);
+ if (rc == DC_STATUS_SUCCESS) {
+ m_deviceDetails->setSamplingRate((int) data[0]);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_ALTITUDE_SAFETY, data, 1);
+ if (rc == DC_STATUS_SUCCESS) {
+ m_deviceDetails->setAltitude(data[0] & 0x03);
+ m_deviceDetails->setPersonalSafety(data[0] >> 2 & 0x03);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_TIMEFORMAT, data, 1);
+ if (rc == DC_STATUS_SUCCESS) {
+ m_deviceDetails->setTimeFormat(data[0] & 0x01);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_UNITS, data, 1);
+ if (rc == DC_STATUS_SUCCESS) {
+ m_deviceDetails->setUnits(data[0] & 0x01);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_MODEL, data, 1);
+ if (rc == DC_STATUS_SUCCESS) {
+ m_deviceDetails->setDiveMode(data[0] & 0x03);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_LIGHT, data, 1);
+ if (rc == DC_STATUS_SUCCESS) {
+ m_deviceDetails->setLightEnabled(data[0] >> 7);
+ m_deviceDetails->setLight(data[0] & 0x7F);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_ALARM_DEPTH_TIME, data, 1);
+ if (rc == DC_STATUS_SUCCESS) {
+ m_deviceDetails->setAlarmTimeEnabled(data[0] & 0x01);
+ m_deviceDetails->setAlarmDepthEnabled(data[0] >> 1 & 0x01);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_ALARM_TIME, data, 2);
+ if (rc == DC_STATUS_SUCCESS) {
+ m_deviceDetails->setAlarmTime(data[0] << 8 ^ data[1]);
+ }
+ rc = dc_device_read(m_data->device, SUUNTO_VYPER_ALARM_DEPTH, data, 2);
+ if (rc == DC_STATUS_SUCCESS) {
+ int depth = feet_to_mm(data[0] << 8 ^ data[1]) / 128;
+ m_deviceDetails->setAlarmDepth(depth);
+ }
+ emit devicedetails(m_deviceDetails);
+ break;
#if DC_VERSION_CHECK(0, 5, 0)
- if (dc_device_get_type(m_data->device) == DC_FAMILY_HW_OSTC3) {
+ case DC_FAMILY_HW_OSTC3:
+ {
supported = true;
m_deviceDetails->setBrightness(0);
m_deviceDetails->setCustomText("");
@@ -300,7 +423,12 @@ void ReadSettingsThread::run()
emit devicedetails(m_deviceDetails);
}
+ break;
#endif // divecomputer 0.5.0
+ default:
+ supported = false;
+ break;
+ }
dc_device_close(m_data->device);
if (!supported) {
@@ -330,8 +458,39 @@ void WriteSettingsThread::run()
dc_status_t rc;
rc = dc_device_open(&m_data->device, m_data->context, m_data->descriptor, m_data->devname);
if (rc == DC_STATUS_SUCCESS) {
+ switch (dc_device_get_type(m_data->device)) {
+ case DC_FAMILY_SUUNTO_VYPER:
+ supported = true;
+ unsigned char data;
+ unsigned char data2[2];
+ dc_device_write(m_data->device, SUUNTO_VYPER_CUSTOM_TEXT,
+ // Convert the customText to a 30 char wide padded with " "
+ (const unsigned char *) QString("%1").arg(m_deviceDetails->customText(), -30, QChar(' ')).toUtf8().data(),
+ SUUNTO_VYPER_CUSTOM_TEXT_LENGHT);
+ data = m_deviceDetails->samplingRate();
+ dc_device_write(m_data->device, SUUNTO_VYPER_SAMPLING_RATE, &data, 1);
+ data = m_deviceDetails->personalSafety() << 2 ^ m_deviceDetails->altitude();
+ dc_device_write(m_data->device, SUUNTO_VYPER_ALTITUDE_SAFETY, &data, 1);
+ data = m_deviceDetails->timeFormat();
+ dc_device_write(m_data->device, SUUNTO_VYPER_TIMEFORMAT, &data, 1);
+ data = m_deviceDetails->units();
+ dc_device_write(m_data->device, SUUNTO_VYPER_UNITS, &data, 1);
+ data = m_deviceDetails->diveMode();
+ dc_device_write(m_data->device, SUUNTO_VYPER_MODEL, &data, 1);
+ data = m_deviceDetails->lightEnabled() << 7 ^ (m_deviceDetails->light() & 0x7F);
+ dc_device_write(m_data->device, SUUNTO_VYPER_LIGHT, &data, 1);
+ data = m_deviceDetails->alarmDepthEnabled() << 1 ^ m_deviceDetails->alarmTimeEnabled();
+ dc_device_write(m_data->device, SUUNTO_VYPER_ALARM_DEPTH_TIME, &data, 1);
+ data2[0] = m_deviceDetails->alarmTime() >> 8;
+ data2[1] = m_deviceDetails->alarmTime() & 0xFF;
+ dc_device_write(m_data->device, SUUNTO_VYPER_ALARM_TIME, data2, 2);
+ data2[0] = (int)(mm_to_feet(m_deviceDetails->alarmDepth()) * 128) >> 8;
+ data2[1] = (int)(mm_to_feet(m_deviceDetails->alarmDepth()) * 128) & 0x0FF;
+ dc_device_write(m_data->device, SUUNTO_VYPER_ALARM_DEPTH, data2, 2);
+ break;
#if DC_VERSION_CHECK(0,5,0)
- if (dc_device_get_type(m_data->device) == DC_FAMILY_HW_OSTC3) {
+ case DC_FAMILY_HW_OSTC3:
+ {
supported = true;
//write gas values
unsigned char gas1Data[4] = {m_deviceDetails->gas1().oxygen,
@@ -496,6 +655,10 @@ void WriteSettingsThread::run()
}
}
#endif // divecomputer 0.5.0
+ default:
+ supported = false;
+ break;
+ }
dc_device_close(m_data->device);
if (!supported) {
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-29 08:23:17 +0000