diff options
Diffstat (limited to 'Documentation/user-manual_fr.txt')
| -rw-r--r-- | Documentation/user-manual_fr.txt | 328 |
1 files changed, 232 insertions, 96 deletions
diff --git a/Documentation/user-manual_fr.txt b/Documentation/user-manual_fr.txt index 9a1173988..8dfafc263 100644 --- a/Documentation/user-manual_fr.txt +++ b/Documentation/user-manual_fr.txt @@ -39,8 +39,9 @@ rapport à d'autres solutions logicielles similaires : vos enregistrements de plongées sur d'autres systèmes d'exploitation. - Avez-vous besoin d'un planificateur de plongée graphique intuitif qui intègre et prend en compte les plongées qui ont déjà été enregistrées ? - - Do you need a way of storing or backing up your dive log on the Internet, - allowing you to view your dive log from anywhere, using an Internet browser? + - Avez-vous besoin d'un moyen d'enregistrer ou de sauvegarder votre carnet de + plongée sur Internet, Vous permettant de visualiser votre carnet depuis + n'importe où, en utilisant un navigateur Internet ? _Subsurface_ est disponible pour Windows (Win XP ou plus récent), les Macs basés sur processeurs Intel (OS/X) et de nombreuses distributions @@ -477,6 +478,128 @@ analysed. Provide the dive computer make and model as well as contextual information about the dives recorded on the dive computer. **** +[[S_Bluetooth]] +==== Connecting _Subsurface_ to a Bluetooth-enabled dive computer +[icon="images/icons/bluetooth.jpg"] + +Bluetooth is becoming a more common way of communication between dive +computers and _Subsurface_, for instance, the Shearwater Petrel Mk2 and the +OSTC Mk3. _Subsurface_ provides a largely operating system independent +Bluetooth interface. Setting up _Subsurface_ for Bluetooth communication +requires four steps: + +- Ensure that Bluetooth is activated on the host computer running + _Subsurface_. +- Ensure that _Subsurface_ sees the Bluetooth adapter on the host computer. +- Ensure the Bluetooth-enabled dive computer is Bluetooth-discoverable and in + PC upload mode. +- Ensure that _Subsurface_ is paired with the Bluetooth-enabled dive computer. + +Select the Download dialogue by selecting _Import -> Import from dive +computer_ from the *Main Menu*. If one checks the check box labelled +_"Choose Bluetooth download mode"_, the dialogue below appears. + +===== Sur Linux ou MacOS : + +image::images/DC_import_Bluetooth.jpg["FIGURE: Download Bluetooth", align="center"] + +On the _Linux_ or _MacOS_ platforms the name of the _Subsurface_ computer +and its Bluetooth address are shown on the righthand side, On the lefthand +side, if the computer has connected more than one local Bluetooth devices +the user can use the list box to indicate which one needs to connect to +_Subsurface_. The power state (on/off) of the Bluetooth adapter is shown +below the address and can be changed by checking the _Turn on/off_ check +box. + +If the Bluetooth address is not shown, then _Subsurface_ does not see the +local Bluetooth device. Ensure that the Bluetooth driver is installed +correctly on the _Subsurface_ computer and check if it can be used by other +Bluetooth utilities like _bluetoothctl_ or _bluemoon_. This achieves the +first two steps above. + +Ensure that the Bluetooth-enabled dive computer is in PC-upload mode and +that it is discoverable by other Bluetooth devices. Consult the manual of +the dive computer to perform this. Now the third item in the list above has +been achieved. + +Select the _Scan_ button towards the bottom left of the dialogue +above. After searching for a small amount of time, the dive computer should +be listed (perhaps as one of a number of Bluetooth devices) in the main list +box on the lefthand side of the dialogue (see image above). If this is not +achieved, select the _Clear_ button and then scan again for Bluetooth +devices using the _Scan_ button. After performing these actions _Subsurface_ +should see the dive computer. The label of the discovered dive computer +contains the name of the device, its address and its pairing status. If the +device is not paired and has a red background color, a context menu can be +opened by selecting the item with a right-click. Select the the _Pair_ +option and wait for the task to complete. + +**** +[icon="images/icons/important.png"] +[IMPORTANT] +Currently _Subsurface_ does not support Bluetooth pairing with dive +computers that require a custom PIN code. In order to pair the devices, use +other OS utility\ies as suggested below. + +One way to achieve this is to use +bluetoothctl+: + + $ bluetoothctl + [bluetooth]# agent KeyboardOnly + Agent registered + [bluetooth]# default-agent + Default agent request successful + [bluetooth]# pair 00:80:25:49:6C:E3 + Attempting to pair with 00:80:25:49:6C:E3 + [CHG] Device 00:80:25:49:6C:E3 Connected: yes + Request PIN code + [agent] Enter PIN code: 0000 +**** + +After the devices are paired the _Save_ button of the dialogue can be +pressed. This closes the Bluetooth dialogue. Now select _Download_ in the +_Download from dive computer_ dialogue which should still be open. The +downloaded dives are shown on the righthand side of the download dialogue. + +===== Sur Windows : +image::images/DC_import_Bluetooth_Windows.png["FIGURE: Download Bluetooth on Windows", align="center"] +On _Windows_ platforms the _Local Bluetooth device details section_ on the +left is not displayed. To successfully initiate a scan (by pressing the +_Scan_ button) check that the Bluetooth device on the _Subsurface_ computer +is turned on. + +The pairing step is checked and done automatically during the download +process. If the devices have never been paired the system will ask for your +permissions and put a message on the right side of the screen: _Add a +device, Tap to setup your DC device_. Always allow this pairing. After a +discovered item is selected, select the _Save_ button. Finally select the +_Download_ button on the _Download_ dialogue and wait for the process to +complete. + +[icon="images/icons/important.png"] +[IMPORTANT] +Be aware that currently _Subsurface_ works only with local Bluetooth +adapters which use Microsoft Bluetooth Stack. If the local device uses +_Widcomm_, _Stonestreet One Bluetopia Bluetooth_ or _BlueSolei_ drivers it +will definitely not work. + + +A log messageOn the bottom left of the _Remote Bluetooth device selection_ +shows details about the current status of the Bluetooth agent. To select +another dive computer for download using the "Remote Bluetooth selection +dialogue" press the three-dots button from the _"Choose Bluetooth download +mode"_ option. + +[icon="images/icons/important.png"] +[IMPORTANT] + +*IN CASE OF PROBLEMS*: If the Bluetooth adapter from the _Subsurface_ computer +gets stuck and the _Download_ process fails repeatedly, + _unpair_ the devices and then repeat the above steps. If this is not successful, + xref:S_HowFindBluetoothDeviceName[_Appendix A_] contains +information for manually setting up and inspecting the Bluetooth connection +with _Subsurface_. + + [[S_DeviceNames]] ==== Changing the name of a dive computer @@ -2478,16 +2601,15 @@ de Facebook_ pour fermer la connexion _Facebook_. image::images/facebook1_f20.jpg["Figure: Facebook login", align="center"] Une fois qu'une connexion à _Facebook_ est établie, transférer un profil de -plongée vers _Facebook_ est facile. Une icône _Facebook_ apparait dans le -panneau *Notes* de _Subsurface_ (voir l'image *A* ci-dessous). Assurez-vous -que la plongée à transférer est affichée dans le panneau *Profil de plongée* -de _Subsurface_. Sélectionnez l'icône _Facebook_ et une fenêtre s'affiche, -pour déterminer quelles informations seront transférées avec le profil de -plongée (voir l'image *B* ci-dessous). Pour transférer un profil de plongée -vers _Facebook_, le nom d'un album _Facebook_ doit être fourni. Les cases à -cocher sur la partie gauche permettent de sélectionner des informations -supplémentaires à transférer avec le profil de plongée. Ces informations -sont affichées dans le champs de texte sur la partie droite du +plongée vers _Facebook_ est facile. Assurez-vous que la plongée à transférer +est affichée dans le panneau *Profil de plongée* de _Subsurface_. Si vous +sélectionnez _Partager sur -> Facebook_ à partir du *menu principal*, une +fenêtre s'affiche, pour déterminer quelles informations seront transférées +avec le profil de plongée (voir l'image *B* ci-dessous). Pour transférer un +profil de plongée vers _Facebook_, le nom d'un album _Facebook_ doit être +fourni. Les cases à cocher sur la partie gauche permettent de sélectionner +des informations supplémentaires à transférer avec le profil de plongée. Ces +informations sont affichées dans le champs de texte sur la partie droite du panneau. (voir l'image *B* ci dessous). Vous pouvez facilement modifier le message qui sera envoyé avec le profil de plongée. Une fois les informations supplémentaires ajoutées et vérifiées, sélectionner le bouton _OK_ qui lance @@ -2641,6 +2763,7 @@ functional even if used while disconnected to the Internet. _Subsurface_ simply data with the cloud server the next time ithe program is used while the computer is connected to the Internet. +[[S_Cloud_storage]] === Web access to _Subsurface cloud storage_ One of the nice side benefits of using _Subsurface cloud storage_ is that @@ -2833,17 +2956,22 @@ image::images/Pref1_f20.jpg["FIGURE: Preferences defaults page", align="center"] ** *Lists and tables*: Here one can specify the font type and font size of the *Dive Table* panel. By decreasing the font size of the *Dive Table*, users can see more dives on a screen. - ** *Dives*: For the _Default Dive File_ one need to specify the directory and + ** *Dives*: For the _Default Dive File_ one needs to specify the directory and file name of one's - electronic dive log book. This is a file with filename extension .xml. When - launched, _Subsurface_ will automatically load the specified dive log book. + electronic dive log book. This is a file with filename extension of either _.xml_ or _ssrf_. When + launched, _Subsurface_ will automatically load the specified dive log book. There are three options: + - _No default file_: When checked, _Subsurface_ does not automatically load a dive log at startup. + - _Local default file_: When checked, _Subsurface_ automatically loads a dive log from the local hard disk + as descibed above. + - _Cloud storage default file_: When checked, _Subsurface automatically loads the dive log from the cloud + device that was initialised using the *Preferences* _Network_ tab (see below). ** *Display invalid*: Dives can be marked as invalid (when a user wishes to hide dives that he/she don't consider valid dives, e.g. pool dives, but still want to keep them in the dive log). This controls whether those dives are displayed in the dive list. - ** *Default cylinder*: Here users can specify the default cylinder listed in + ** *Default cylinder*: Specify the default cylinder listed in the *Equipment* tab of the *Notes* panel. ** *Animations*: Some actions in showing the dive profile are performed using @@ -2851,14 +2979,9 @@ image::images/Pref1_f20.jpg["FIGURE: Preferences defaults page", align="center"] dive. When viewing a different dive, these changes in axis characteristics do not happen instantaneously, but are animated. The _Speed_ of animations can be controlled by setting this slider - with faster animation speed to the left, with a 0 value representing no animation + with faster animation speed to the left, and a 0 value representing no animation at all. - ** *Subsurface web service*: When one subscribes to the <<S_Companion,Subsurface web service>>, a very - long and hard-to-remember userID is issued. This is the place to save that userID. By - checking the option _Save User ID locally?_, one ensures that a local copy of that userID - is saved. - ** *Clear all settings*: As indicated in the button below this heading, all settings are cleared and set to default values. @@ -2872,6 +2995,11 @@ measurement system. Alternatively, if one selects the *Personalise* radio button, units can be selected independently, with some units in the metric system and others in imperial. +Irrespective of the above settings, dive time measurements can be either in +seconds or minutes. Choose the appropriate option. GPS coordinates can be +represented either as traditionla coordinates (degrees, minutes, seconds) or +as decimal degrees Choose the appropiate option. + === Graph [[S_CCR_options]] image::images/Pref3_f20.jpg["FIGURE: Preferences Graph page", align="center"] @@ -2882,35 +3010,35 @@ This panel allows two type of selections: *Show*: Here users can specify the amount of information shown as part of the dive profile: ** Thresholds: _Subsurface_ can display the nitrogen, oxygen and the helium partial pressures during - the dive. These are enabled using the toolbar on the left hand side of the *Dive Profile* + the dive. enabled using the toolbar on the left hand side of the *Dive Profile* panel. For each of these graphs users can specify a threshold value on the right-hand side of the - Preferences panel. If any of the graphs go above this threshold level, the graph is - highlighted in red, indicating that the threshold has been exceeded. - -** _Draw dive computer reported ceiling red_: This checkbox allows exactly what it says. + Preferences panel. If any of the graphs go above the specified threshold level, the graph is + highlighted in red, indicating that the particular partial presure threshold has been exceeded. +** _Max pO~2~ whn displaying MOD_ is the value used to calculate the maximum operative depth (MOD) + for a dive. Specify an appropriate partial pressure. A value of 1.4 is commonly used. +** _Draw dive computer reported ceiling red_: This checkbox allows exactly what it says. By default + the computer reported ceiling is shown in white. Not all dive computers report ceiling values. If the dive computer does report it, it may differ - from the ceilings calculated by _Subsurface_. This is because of the different algorithms and gradient factors available for calculating ceilings, as well as the dynamic way that a + from the ceilings calculated by _Subsurface_. This is because of the different algorithms and + gradient factors available for calculating ceilings, as well as the dynamic way that a dive computer can calculate ceilings during a dive. - ** _Show unused cylinders in Equipment Tab_: This checkbox allows display of information about unused cylinders when viewing the *Equipment Tab*. Conversely, if this box is not checked, and any cylinders entered using the *Equipment Tab* are not used (e.g. there was no gas switch to such a cylinder), then these cylinders are omitted from that list. - -[[GradientFactors_Ref]] -** _Show average depth_: Activating this checkbox causes _Subsurface_ to draw a grey line across - the dive profile, indicating the mean depth of the dive up to a particular point in time during - that dive. Normally this is a u-shaped line indicating the deepest average depth just before the +** _Show average depth_: If this box is checked, the *Dive Profile* panel contains a grey line that indicates + the mean depth of the dive up to any time instant during the dive. Normally this is a u-shaped line indicating the deepest average depth just before the ascent. * *Misc*: -** Gradient Factors:* Here users can set the _gradient factors_ used while diving. GF_Low is +[[GradientFactors_Ref]] +** Gradient Factors (GFLow and GFHigh):* Set the _gradient factors_ used while diving. GF_Low is the gradient factor at depth and GF_High is used just below the surface. At intermediate depths gradient factors between GF_Low and GF_High are used. Gradient factors add conservatism to the nitrogen exposure during a dive, in a similar way that many dive computers have a conservatism setting. The lower the value of a gradient factor, the more conservative the calculations are with respect to nitrogen loading and the deeper the ascent ceilings are. Gradient - factors of 20/60 are considered conservative and values of 60/90 are considered - harsh. Checking *GFLow at max depth* box causes GF_Low to be used at the + factors of 20/60 are considered conservative and values of 70/90 are considered + harsh. Checking the *GFLow at max depth* box causes GF_Low to be used at the deepest depth of a dive. If this box is not checked, GF_Low is applied at all depths deeper than the first deco stop. For more information see: @@ -2929,18 +3057,17 @@ the dive profile: * *Configuring dive planning using rebreather equipment:* ** _Default CCR setpoint for dive planning:_ Specify the O~2~ setpoint for a - CCR dive plan. This determines the pO~2~ that will be maintained - during a particular dive. This is the setpoint that is used at the start - of any CCR dive. Setpoint changes during the dive can be added via the + CCR dive plan. This determines the pO~2~ maintained + during a particular dive. Setpoint changes during the dive can be added via the profile context menu. ** _pSCR O~2~ metabolism rate:_ For a semiclosed rebreather (pSCR) system, this is the - volume of oxygen used by a diver each minute. Set this value for pSCR dive planning + volume of oxygen used by a diver during a minute. Set this value for pSCR dive planning and decompression calculations. ** _pSCR ratio:_ For pSCR equipment the dump ratio is the ratio of gas released to the environment to that of the gas recirculated to the diver. Set this value for a - pSCR dive plan. + pSCR dive plan. A 1:10 ratio is commonly used. === Language @@ -2954,28 +3081,46 @@ same language / country settings as the underlying OS. If this is for some reason undesirable users can uncheck this checkbox and pick a language / country combination from the list of included localizations. The _Filter_ text box allows one to list similar languages. For instance there are -several system variants of English or French. This particular preference -requires a restart of _Subsurface_ to take effect. +several system variants of English or French. *This particular preference +requires a restart of _Subsurface_ to take effect*. === Network This panel facilitates communication between _Subsurface_ and data sources -on the Internet. +on the Internet. This is important, for instance, when _Subsurface_ needs +to communicate with Internet services such as Cloud storage, the +<<S_Companion,_Subsurface Companion app_>> or data export/import from +_Divelogs.de_. These Internet requirements are determined by one's type of +connection to the Internet and by the Internet Service Provider (ISP) used. +One's ISP should provide the appropriate information. image::images/Pref5_f20.jpg["FIGURE: Preferences Network page", align="center"] -This is important, for instance, when _Subsurface_ needs to communicate with -Internet services such as the <<S_Companion,_Subsurface Companion app_>> or -data export/import from _Divelogs.de_. These Internet requirements are -determined by one's type of connection to the Internet and by the Internet -Service Provider (ISP) used. One's ISP should provide the appropriate -information. If a proxy server is used for Internet access, the appropriate -information needs to be provided here. The type of proxy needs to be -selected from the dropdown list. after which the IP address of the host and -the appropriate port number should be provided. If the proxy server uses -authentication, the appropriate userID and password also needs to be -provided so that _Subsurface_ can automatically pass through the proxy -server to access the Internet. +This dialogue has three sections: + +** _Proxy type_: +If a proxy server is used for Internet access, the type of proxy needs to be selected from the dropdown list, +after which the IP address of the host and the appropriate port number should +be provided. If the proxy server uses authentication, the appropriate userID and +password are required so that _Subsurface_ can automatically pass +through the proxy server to access the Internet. This information is usually obtained +from one's ISP. + +** _Subsurface cloud storage_: In order to store one's dive log in the cloud, a valid email address + and password are required. This allows _Subsurface_ to email security information + regarding cloud storage to a user, and to set up the cloud storage appropriately. + Two additional options are given: + - Sync to cloud in the background_: This option allows saving of dive information to the cloud storage + while the user performs other tatsks inside _Subsurface_. + - _Save password locally_: This allows local storage of the cloud storage password. Note that this + information is saved in raw text form, not encoded in any way. + +** _Subsurface web service_: When one subscribes to the <<S_Companion,Subsurface web service>>, a very + long and hard-to-remember userID is issued. This is the place to save that userID. By + checking the option _Save User ID locally?_, one ensures that a local copy of that userID + is saved. + +[[S_Facebook]] === Accès Facebook Ce panneau vous permet de vous connecter à votre compte Facebook pour transférer des informations de Subsurface vers Facebook. @@ -2989,6 +3134,11 @@ connexion à Subsurface", sur l'écran de connexion, n'a aucun effet. Reportez-vous à la section xref:S_facebook[Export des profils de plongée vers Facebook] pour plus d'informations. +=== Georeference + +_Subsurface provides a geo-lookup service (that is, an ability to look up +the geographic coordinates of a place name). + [[S_DivePlanner]] == The _Subsurface_ dive planner Dive planning is an advanced feature of _Subsurface_, accessible by @@ -3398,8 +3548,12 @@ des sections de ce manuel traitant des opérations relatives. actuellement ouvert et supprime toutes les informations de plongées. - _Ouvrir un carnet de plongée_ - Cela ouvre une fenêtre pour sélectionner le carnet de plongée à ouvrir. +- _Open cloud storage_ - Open the dive log previously saved in + <<S_Cloud_storage,_Cloud storage_>>. - _Sauvegarder_ - Enregistrer le carnet de plongée qui est actuellement ouvert. +- _Save to cloud storage_ - Save the current dive log to + <<S_Cloud_storage,_Cloud storage_>>. - _Enregsitrer sous_ - Enregistrer le carnet actuel sous un nom différent. - _Fermer_ - Fermer le carnet de plongée actuellement ouvert. - <<S_ExportLog,_Exporter_>> - Exporter le carnet de plongée actuellement @@ -3407,11 +3561,11 @@ des sections de ce manuel traitant des opérations relatives. formats. - <<S_PrintDivelog,_Imprimer_>> - Imprimer le carnet de plongée actuellement ouvert. +- <<S_Preferences,_Préférences_>> - Définir les préférences de _Subsurface_. - <<S_FindMovedImages, _Find moved images_>> - If photos taken during dives have been moved to a different disk or directory, locate them and link them to the appropriate dives. -- <<S_Preferences,_Préférences_>> - Définir les préférences de _Subsurface_. - <<S_Configure,_Configurer l'ordinateur de plongée_>> - Modifier la configuration d'un ordinateur de plongée. - _Quitter_ - Quitter _Subsurface_. @@ -3464,43 +3618,29 @@ des sections de ce manuel traitant des opérations relatives. mondiale*. - _Statistiques annuelles_ - Affiche par année le résumé des statistiques des plongées effectuées. -- _Ordinateur précédent_ - Passer à l'ordinateur de plongée précédent. +- _Prev DC_ - If a single dive was logged from more than one dive computer, + switch to data from + ordinateur de plongée précédent. - _Ordinateur suivant_ - Passer à l'ordinateur de plongée suivant. - _Plein écran_ - Passer en mode plein écran. +=== Share on +- <<S_Facebook,_Facebook_>> - Partager la plongée sélectionnée sur votre + Facebook. + + === Aide - _À propos de Subsurface_ - Affiche un panneau avec le numéro de version de _Subsurface_ ainsi que les informations de licence. - _Vérifier les mises à jour_ - Vérifier si une nouvelle version de Subsurface est disponible sur le http://subsurface-divelog.org/[site web de _Subsurface_ ]. -- <<S_UserSurvey,_Sondge utilisateur_>> - Aidez à rendre _Subsurface_ encore - meilleur en répondant à notre sondage utilisateur. +- <<S_UserSurvey,_Sondge utilisateur_>> - Aider à rendre _Subsurface_ encore + meilleur en répondant à notre sondage utilisateur ou en répondant à un autre + sondage, si vos habitudes de plongées ont changées. - _Manuel utilisateur_ - Ouvre une fenêtre affichant ce manuel utilisateur. -== Mobile Version - -_Subsurface_ has a mobile version, which can be used to view the dives -stored in the user's cloud account. - -=== How to use the mobile version -When you first open the mobile app, you will have to log into your cloud -account. To do this, click on the menu icon on the upper right, then click -on preferences. Enter your cloud email and password, then click on save. - -To load dives the first time, click on the menu icon, and then click on -_Load Dives_. This will fetch the dive list from the cloud storage onto your -device. On subsequent runs, the divelist will be loaded automatically when -you open the app. - -To view dive details, tap on any dive in the dive list. This will open the -dive details window, which shows the dive profile and below it, the dive -details. Any of the dive details can be changed. - -To save changes made to the dive details, click on the back icon, then from -the menu select _Save Changes_. This will save your changes to the cloud -storage. == ANNEXE A : informations spécifiques au système d'exploitation utilisé pour importer les informations de plongées depuis un ordinateur de plongée. @@ -3605,8 +3745,9 @@ Avec le bon nom de périphérique (par exemple +dev/ttyUSB3+) et avec un accès en écriture au port USB, l'ordinateur de plongée devrait se connecter et vous devriez pouvoir importer vos plongées. + [[S_HowFindBluetoothDeviceName]] -=== Setting up bluetooth enabled devices +=== Manually setting up Bluetooth enabled devices [icon="images/icons/bluetooth.jpg"] [NOTE] For dive computers communicating through bluetooth like the Heinrichs @@ -3825,6 +3966,9 @@ _Import->Import from dive computer_ and enter appropriate Vendor (e.g. _Shearwater_), Dive Computer (_Petrel_), Device or Mount Point (_/dev/rfcomm0_) and click _Download_. + + + [[_appendix_b_dive_computer_specific_information_for_importing_dive_information]] == APPENDIX B: Dive Computer specific information for importing dive data. @@ -3921,21 +4065,13 @@ by _Subsurface_ will most likely differ from the one displayed on the xDEEP BLACK. -=== Importing from Shearwater Predator using Bluetooth +=== Importing from Shearwater Predator/Petrel using Bluetooth [icon="images/icons/predator.jpg"] [NOTE] -Using a Shearwater Predator one may be able to pair Bluetooth but then -encounter issues when downloading, showing errors like _Slip RX: unexp. SLIP -END_ on the Predator. This might also arise when using other dive log -software and operating systems other than Linux. We have no detailed idea -about the source and how to fix this, but it is reported to be solved -sometimes by one of these steps: - - * use the Bluetooth dongle which came with the Shearwater Predator instead of - the built-in one of the _Subsurface_ computer - * switch to different Bluetooth drivers for the same hardware - * switch off WiFi while using Bluetooth +Specific instructions for downloading dives using Bluetooth are given in the +section above, <<S_Bluetooth,_Connecting Subsurface to a Bluetooth-enabled +dive computer_>>. [[S_PoseidonMkVI]] === Importing from Poseidon MkVI Discovery |