diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/Makefile | 10 | ||||
| -rw-r--r-- | Documentation/user-manual.txt | 612 |
2 files changed, 458 insertions, 164 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile new file mode 100644 index 000000000..273eae521 --- /dev/null +++ b/Documentation/Makefile @@ -0,0 +1,10 @@ +ASCIIDOC=asciidoc +BROWSER=firefox + +doc: user-manual.html + +show: user-manual.html + $(BROWSER) user-manual.html + +user-manual.html: user-manual.txt + $(ASCIIDOC) user-manual.txt diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 181360140..75fb3a338 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1,19 +1,23 @@ -Subsurface 1.2 - -User Manual - -Version 0.0.4 - -Autor documentation: Jacco van Koll <jko@haringstad.com> +Subsurface 1.2 User Manual +========================== +Jacco van_Koll <jko@haringstad.com> +v0.0.7, January 2012 +:Author Initials: JKO +:toc: +:icons: +:numbered: +:website: http://subsurface.hohndel.org Scope of this document is the usage of the program. Please read the build manual for instructions how to build the -software and (if needed) it´s dependencies. +software and (if needed) its dependencies. Audience: Fun Divers, Tec Divers, Professional Divers -1. Introduction: +[[S_Introduction]] +Introduction: +------------- Subsurface was started because of a lack of viable dive log software on Linux. It turns out that the resulting software was easily ported @@ -24,18 +28,22 @@ already very usable for divers with supported dive-computers. In this manual the Suunto Viper will be used for all examples. -2. Requirements +[[S_Requirements]] +Requirements +------------ Before you are able to import information from your divecomputer into Subsurface, you need some preparation. Do you have the following: - 1. Your Divecomputer - Compatible with libdivecomputer (see list in Appendix A) + 1. Your Divecomputer - Compatible with libdivecomputer (see list in <<AppendixA,Appendix A>>) 2. Communication interface - Cable to connect your divecomputer to your PC/Laptop/Netbook 3. Working installation of Subsurface 4. If needed, the manual of your divecomputer -3. Start using the program: +[[S_StartUsing]] +Start using the program +----------------------- When you start the program for the first time, it shows no information at all. This is because the program does not automatically load the @@ -45,12 +53,14 @@ There is a menu, containing 'File', 'Log', 'Filter' and Help. The screen is devided in 3 area's: - Area with 3 tabs: Dive Notes, Equipment, Info & Stats - Area next to the 3 tabs, which will contain the dive profile - Area with the dives (usually called dive list), which can be sorted by number, date, etc. + - Area with 3 tabs: Dive Notes, Equipment, Info & Stats + - Area next to the 3 tabs which will contain the dive profile + - Area with the dives (usually called dive list) which can be sorted by number, date, etc. -4. Import new dives +[[S_ImportNewDives]] +Import new dives from your divecomputer +--------------------------------------- Before you start fiddeling around with your divecomputer, note that there are divecomputers that consume more power when they are in the @@ -62,40 +72,42 @@ be recharged when connected to the USB port. Now it is time to hook up your divecomputer to your Linux system: - Make sure that your OS has the required drivers installed + - Make sure that your OS has the required drivers installed - On Linux this means you need to have the correct kernel - module loaded. Most distributions will do this automatically - for you. + * On Linux this means you need to have the correct kernel + module loaded. Most distributions will do this automatically + for you. - On Windows, the OS should offer to download the correct - driver when you connect to the USB port. + * On Windows, the OS should offer to download the correct + driver when you connect to the USB port. - On a Mac you at times have to manually hunt for the correct - driver. For example the correct driver for the Mares Puck - devices can be found as Mac_OSX_VCP_Driver.zip at - http://www.silabs.com/support/pages/support.aspx?ProductFamily=USB+Bridges + * On a Mac you at times have to manually hunt for the correct + driver. For example the correct driver for the Mares Puck + devices can be found as Mac_OSX_VCP_Driver.zip at + http://www.silabs.com/support/pages/support.aspx?ProductFamily=USB+Bridges - Connect your interface cable to a free USB port + - Connect your interface cable to a free USB port - Put your divecomputer into PC Communication mode. (For Suunto Viper, press Mode - 1 Memory - 3 TR-PC) + - Put your divecomputer into PC Communication mode. (For Suunto Viper, press Mode - 1 Memory - 3 TR-PC) (You should consult the manual of your specific divecomputer for your brand and type) - Go in Subsurface to 'File - Import' - Within the popup, under Dive computer, choose your brand and type. Here we choose Suunto Vyper. - Change the devicename under which your interface is connected. - On Linux, default is /dev/ttyUSB0 - On Windows, default is COM3 - On Mac, default is ... specific to the dive computer + - Go in Subsurface to 'File - Import' + * Within the popup, under Dive computer, choose your brand and type. Here we choose Suunto Vyper. + * Change the devicename under which your interface is connected. + ** On Linux, default is /dev/ttyUSB0 + ** On Windows, default is COM3 + ** On Mac, default is ... specific to the dive computer - Click the 'OK' button. + * Click the 'OK' button. - Now watch how your data is retrieved from your divecomputer! - Depending on your type of computer and/or number of dives, this - could take some time. Please be patient. + - Now watch how your data is retrieved from your divecomputer! + Depending on your type of computer and/or number of dives, this + could take some time. Please be patient. -5. Viewing and completing your logs +[[S_ViewingLogs]] +Viewing and completing your logs +-------------------------------- When all data from your divecomputer is transferred, you will see a listing of your dives in Area 3. @@ -104,99 +116,110 @@ An example: On Sunday Oct 23, 2011 you made a dive. In the log line of this dive, you see the following information: - - #: 12 Dive number - Date: Sun, Oct 23, 2011 10:50 Date and time of your dive - *: Your rating (none at this time) - m: 12.8 Your maximum depth in meters - min: 31:20 Your dive-time in minutes and seconds - Deg. C: 13.0 Lowest water temperature during your dive - Cyl: Your used cylinder (none at this time) - O2%: air What type of mixture - SAC: SAC (none at this time) - Location: Where you performed your dive (empty) - - As you can see, some information is already there because it is - retrieved from your divecomputer. Some information is waiting for - you to be added. By double clicking on this dive, you can view and - complete the log. - - -6. Edit the dive info +[width="70%",cols="<5%,10%,<20%,<65%",grid="none",frame="none",style="monospaced"] +|=============================================================================== +|| # | 12 | Dive number +|| Date | Sun, Oct 23, 2011 10:50 | Date and time of your dive +|| * | | Your rating (none at this time) +|| m | 12.8 | Your maximum depth in meters +|| min | 31:20 | Your dive-time in minutes and seconds +|| Deg. C | 13.0 | Lowest water temperature during your dive +|| Cyl | | Your used cylinder (none at this time) +|| O2% | air | What type of mixture +|| SAC | | SAC (none at this time) +|| Location | | Where you performed your dive (empty) +|=============================================================================== + +As you can see, some information is already there because it is +retrieved from your divecomputer. Some information is waiting for +you to be added. By double clicking on this dive, you can view and +complete the log. + + +[[S_EditDiveInfo]] +Edit the dive info +------------------ When you double click on the dive log line, the editor window opens. Now you can add information that is missing. Let start with completing the example: -You double clicked on dive #12, as described in 5. Viewing and -completing your logs. The Dive Info window pops up and you will see +You double clicked on dive #12, as described in <<S_ViewingLogs,Viewing and +completing your logs>>. The Dive Info window pops up and you will see the following: - - Location: An input where you can enter your new location, or you can choose with the pull-down previous locations - Dive Master: An input where you can enter the name of your Dive Master, or you can choose with the pull-down a previous name - Buddy: An input where you can enter het name of you Buddy, or you can choose with the pull-down a previous name - Rating: A pull-down where you can rate your dive. - Notes: A free input where you can enter information about your dive. What you've seen, etc. +[horizontal] + *Location*:: An input where you can enter your new location, or you can choose with the pull-down previous locations + *Dive Master*:: An input where you can enter the name of your Dive Master, or you can choose with the pull-down a previous name + *Buddy*:: An input where you can enter het name of you Buddy, or you can choose with the pull-down a previous name + *Rating*:: A pull-down where you can rate your dive. + *Notes*:: A free input where you can enter information about your dive. What you've seen, etc. In this example we use the following information: - - Location: Oostvoornse Meer - Dive Master: S. de Vries - Buddy: S. de Vries - Rating: 3 stars - Notes: First dive here. Good visibility. Did see the concrete poles, some crab and fish. Very nice and easy dive. - Made movie with 'headcam'. +[horizontal] + *Location*:: Oostvoornse Meer + *Dive Master*:: S. de Vries + *Buddy*:: S. de Vries + *Rating*:: 3 stars + *Notes*:: First dive here. Good visibility. Did see the concrete poles, some crab and fish. Very nice and easy dive. + + Made movie with headcam. Now don't press ok yet! +[[S_EditEquipmentInfo]] +Edit equipment info +------------------- -7. Edit equipment info - -You also want to edit your Cylinder information. And in the previous -chapter, this was not edited. There is still another item to edit in -the Dive Info screen: +You also want to edit your Cylinder information. And in the +<<S_EditDiveInfo, previous chapter>>, this was not edited. There is +still another item to edit in the Dive Info screen: - Cylinder: A double-click fieldset. Here you can edit your Cylinder information + - Cylinder: A double-click fieldset. Here you can edit your Cylinder information So, when you double click on the cylinder info, you get another popup. This popup gives you the following: - Cylinder: Pull-down where you can choose your Cylinder, or add your own - Size: The volume if not 'filled' - Pressure: The maximum pressure of this Cylinder - Optional: - Start Pressure: What was the pressure starting the dive - End Pressure: What was the pressure ending the dive - Nitrox: What was the percentage of blend + - Cylinder: Pull-down where you can choose your Cylinder, or add your own + - Size: The volume if not `filled' + - Pressure: The maximum pressure of this Cylinder + - Optional: + * Start Pressure: What was the pressure starting the dive + * End Pressure: What was the pressure ending the dive + * Nitrox: What was the percentage of blend Now we are going to enter the data: - Cylinder: 15.0 l - Size: 15.0 - Pressure: 220 + - Cylinder: 15.0 l + - Size: 15.0 + - Pressure: 220 - Now tick the option for Start & End pressure +Now tick the option for Start & End pressure - Start Pressure: 180 - End Pressure: 60 - Press Ok + - Start Pressure: 180 + - End Pressure: 60 + - Press Ok Now your dive information for this dive is complete. You can now press ok in the Dive Info screen and view the results. - -8. Adding equipment info +[[S_AddingEquipment]] +Adding equipment info +--------------------- In Area with the 3 tabs there is the tab Equipment. With this tab, you can add Cylinders. We are going to add an additional Cylinder: - In the main screen, click on the Equipment tab. This shows your Cylinder you added in 7. - Now press the Add button and the Cylinder popup comes back. - Just like you added your Cylinder information in 7. Edit equipment info, you add your cylinder - information for the second Cylinder. Fill in all the information about this Cylinder and press OK. + - In the main screen, click on the Equipment tab. This shows your + Cylinder you added in 7. + + - Now press the Add button and the Cylinder popup comes back. + - Just like you added your Cylinder information in 7. Edit equipment + info, you add your cylinder information for the second Cylinder. + Fill in all the information about this Cylinder and press OK. -9. View info & Stats +[[S_ViewInfoStats]] +View info & Stats +----------------- After adding all the information, you can use the tab Info & Stats. This tab will provide you with all the (statistical and @@ -204,31 +227,32 @@ calculated) information regarding your dive. The information contains: - Dive Info: - - Date: Date and time of your dive - Dive Time: Duration of your dive - Surf Intv: Interval between previous dive and this dive - Max Depth: Maximum depth of this dive - Avg Depth: The average depth of this dive - Water Temp: Lowest temperature of the water - SAC: The amount of Surface Air Consumption liters per minute - OTU: The Oxygen Toxicity Units of this dive - O2/He: Amount of Oxygen/Helium - Gas Used: The total volume of gas used during this dive - - Statistics: - - Total time: Total time of all your dives together, calculated - Avg Time: The average divetime of your dives, calculated - Max Depth: The maximum depth of all your dives - Avg Depth: The average depth of all your dives, calculated - Max SAC: Highest of Surface Air Consumption of all your dives - Min SAC: Lowest of Surface Air Consumption of all your dives - Avg SAC: Average Surface Air Consuption of all your dives, calculated - - -10. Setting up preferences + - Dive Info: + + ** Date: Date and time of your dive + ** Dive Time: Duration of your dive + ** Surf Intv: Interval between previous dive and this dive + ** Max Depth: Maximum depth of this dive + ** Avg Depth: The average depth of this dive + ** Water Temp: Lowest temperature of the water + ** SAC: The amount of Surface Air Consumption liters per minute + ** OTU: The Oxygen Toxicity Units of this dive + ** O2/He: Amount of Oxygen/Helium + ** Gas Used: The total volume of gas used during this dive + + - Statistics: + + ** Total time: Total time of all your dives together, calculated + ** Avg Time: The average divetime of your dives, calculated + ** Max Depth: The maximum depth of all your dives + ** Avg Depth: The average depth of all your dives, calculated + ** Max SAC: Highest of Surface Air Consumption of all your dives + ** Min SAC: Lowest of Surface Air Consumption of all your dives + ** Avg SAC: Average Surface Air Consuption of all your dives, calculated + +[[S_SettingUpPreferences]] +Setting up preferences +---------------------- Subsurface has the ability to modify the preferences you want. By using menu 'File - Preferences' you will be presented a popup with the @@ -236,19 +260,19 @@ using menu 'File - Preferences' you will be presented a popup with the words, use Metric or Imperial. You can set the following options: - Depth: Your diving depth in Meters or Feet - Pressure: The pressure of your tank(s) in Bar/Ato or PSI (Pressure Square Inch) - Volume: The volume of your tank(s) in Liter or CuFt (Cubic Feet) (At sea-level pressure) - Temperature: The temperature of the water in Celcius or Fahrenheit + - Depth: Your diving depth in Meters or Feet + - Pressure: The pressure of your tank(s) in Bar/Ato or PSI (Pressure Square Inch) + - Volume: The volume of your tank(s) in Liter or CuFt (Cubic Feet) (At sea-level pressure) + - Temperature: The temperature of the water in Celcius or Fahrenheit In the main screen, you did see in Area 3, some information. In the Columns options, you can enable/disable options you would like to show there: - Show Temp: Shows the temperature of your dive - Show Cyl: Shows the cylinder(s) of your dive - Show O2%: Shows the O2% of your dive - Show SAC: Shows the SAC of your dive (Surface Air Consumption) - Show OTU: Shows the OTU of your dive (Oxygen Toxicity Units) + - Show Temp: Shows the temperature of your dive + - Show Cyl: Shows the cylinder(s) of your dive + - Show O2%: Shows the O2% of your dive + - Show SAC: Shows the SAC of your dive (Surface Air Consumption) + - Show OTU: Shows the OTU of your dive (Oxygen Toxicity Units) And, you can change the font usage of the program. @@ -256,39 +280,41 @@ I will give an example here: I am a diver in The Netherlands, using the Metric System. Therefor, I go to the menu File, choose Preferences here. In the Units section, I -use the folowing: +use the following: - Depth: Meter - Pressure: Bar - Volume: Liter - Temperature: Celcius + - Depth: Meter + - Pressure: Bar + - Volume: Liter + - Temperature: Celcius I would like to see the: - Temperature - Show Cyl - Show O2% - Show SAC + + - Temperature + - Show Cyl + - Show O2% + - Show SAC As a beginning diver, I don't need to track my OTUs. So I leave this one not enabled. Clicking OK on the dialog stores these settings. - -11. How to find the Device Name +[[S_HowFindDeviceName]] +How to find the Device Name +--------------------------- When you connect your divecomputer by using an USB connector, most of the -time, the default of ´/dev/ttyUSB0' should work. But if you have other +time, the default of '/dev/ttyUSB0' should work. But if you have other Serial to USB devices, this can be different because '/dev/ttyUSB0' is already in use. One of the ways to find out what your dive name is: - Disconnect your usb cable of your dive computer - Open a terminal - Type the command: 'dmesg' and press enter - Plug in your usb cable of your divecomputer - Type the command: 'dmesg' and press enter + - Disconnect your usb cable of your dive computer + - Open a terminal + - Type the command: 'dmesg' and press enter + - Plug in your usb cable of your divecomputer + - Type the command: 'dmesg' and press enter Within your terminal you should see a message similair to this one: @@ -313,45 +339,303 @@ detected and is connected to 'ttyUSB3'. Now you use this information in the import settings as '/dev/ttyUSB3'. Your divecomputer interface is connected and you should be able to import your dives. +[[S_ImportingDivesJDivelog]] +Importing dives from JDivelog +----------------------------- + +Maybe you have been using JDivelog and you have a lot of dives logged in +this program. You don't have to type all information by hand into +Subsurface, because you can import your divelogs from JDivelog. -Appendix A +JDivelog stores its information into files with the extension of .jlb. +These .jlb contain all the information that has been stored, except your +images in xml format. + +By using the menu 'File - Import' you get the popup, like described in +<<S_ImportNewDives, chapter 4>>, Importing new dives. Within this +popup there is the option to import existing files which are already +on your computer. To import your JDivelog file(s) do the following: + + - Open 'File - Import' on the menu + - Use the file locator under XML file name + - Browse your directories to the location where your *.jlb file is + - Select your existing *.jlb file and click 'open' + - Click the OK button in the popup + +After a few moments, you see your existing logs in Subsurface. Now you can +edit your dives like explained in <<S_EditDiveInfo, chapter 6>>. + +Information that is imported from JDivelog into the location field: + + - Extended dive location information + +Information that is merged into the location or notes field: + + - Used amount of weight + - Used type of suit + - Used type of gloves + - Type of dive + - Dive activity + +Alternatively, you can start subsurface with the --import command line +which will have the same effect: + + subsurface MyDives.xml --import JDivelogDives.jlb + +will open your divelog (assuming that's called MyDives.xml) and then +import the dives from JdivelogDives.jlb. You can now save the combined +divelog back as MyDives.xml. + +Subsurface will similarly import xml exports from DivingLog as well as +Suunto DiveManager. + +When importing dives subsurface tries to detect multiple records for +the same dive and merges the information as best as it can. So as long +as there are no time zone issues (or other reasons that would cause the +beginning time of the dives to be substantially different) subsurface +will not create duplicate entries. + +[[S_ImportingDivesSuunto]] +Importing dives from Suunto Divemanager 3.* +------------------------------------------- + +Before you can start importing dives from Suunto Divemanager, you first +have to export the dives you want to import. Subsurface does not import +directly from the Suunto Divemanager log files. The following procedures +unpacking instructions for Linux and Windows. + +Export from Suunto Divemanager +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + - Start Suunto Divemanager and login with the name containing the logs + - Do not start the import wizard to import dives from your computer. + - In the navigation tree on the left side of the program-window, select your dives. + - Within the list of dives, select the dives you would like to import later: + * To select certain dives: hold ctrl and point & click the dive + * To select all dives: Select the first dive, hold down shift and select the last dive + - With the dives marked, use the program menu 'File - Export' + - The export popup will show + - Within this popup, there is one field called Export Path. + * Click the button browse next to the field Export Path + ** A file-manager like window pops up + ** Navigate to the directory where you want to store the Divelog.SDE file + ** Optional change the name of the file you want to save + ** Click 'Save' + * You are back in the Export popup. Press the button 'Export' + - Your dives are now exported to the file Divelogs.SDE. + +Unpacking the Divelogs.SDE on Windows +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Renaming your file to a .zip: + + - Use the filemanager (explorer) and navigate to your Divelogs.SDE file + - Right click on the Divelogs.SDE file and choose 'Rename' + * Change the name into Divelogs.SDE.zip + * Press enter when done. A warning popup shows: + + The file could be unusable when changing the extension. Are you sure: + Press OK. + + * Your filemanager will show now the filename Divelogs.SDE.zip + +When you double click your Divelogs.SDE.zip file, your preferred archiving +tool will start and show you the list of xml files that are in the zip +archive. Select all the xml files and extract them to a place where you +can find them later in the process. + +Unpacking the Divelogs.SDE on Linux +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The assumption is that you have exported your Divelogs.SDE on a Windows +system. You have to transfer the file to a location where you can read it +from within your Linux environment. You can use file-transfer, shared +storage or an USB storage device to do this. +The example uses an USB storage: + + - Insert your USB storage into your Windows computer + - Use the filemanager (explorer) to navigate to the location where your Divelogs.SDE file is located + - Copy the file to your USB storage: + * Select the file by 1 click + * Press Ctrl+c + * Navigate to your USB Storage + * Press Ctrl+v + - Disconnect your USB storage by right clicking your USB storage in the explorer and choose Eject + - Insert your USB storage into your Linux computer + - Use your favourite filemanager to navigate to your USB storage + - Copy the file to /tmp by: + * Right click on the file + * select copy + * navigate to /tmp + * press Ctrl+v or use the menu 'Edit - Paste' + - The file is now transfered to /tmp + +Now the file is in /tmp, we can extract the xml files from it. You can do +this by hand, or use the example script in <<AppendixB,Appendix B>>. + +To extract the xml files, we need to open a terminal and use the following +commands: + + cd /tmp + mkdir suunto + cd suunto + unzip ../Divelogs.SDE + +Your divelogs have now been extracted from the Divelogs.SDE file and you +can import them with the command: + + subsurface *.xml + +And with the menu 'File - Save' you can save your dives into the +Subsurface format. + +[[S_Menu]] +The menu and sub-menus +---------------------- + +Within Subsurface, there are several menu and sub-menu options. All of +those will be described here with their function. + +The file menu +~~~~~~~~~~~~~ + +The file menu is used for the following menu options: + + - Open:: Open your saved Subsurface xml file(s) + - Save:: Save your current divelogs or changes you made to your divelogs + - Print:: Print your current divelog profiles and information about the dive + - Import:: Import your dives from your divecomputer, JDivelogs or Suunto Divemanager + - Preferences:: Set your preferences as described in <<S_SettingUpPreferences,chapter 10>> + - Quit:: Quit the program + +The Log menu +~~~~~~~~~~~~ + +Within the Log menu, there are only 2 sub-items: + + - Renumber:: This option provides you with a popup. Within this + popup you can choose what the first number of your dives should be + for this set of dives. + - View:: This is a submenu containing: + * List:: Show only the list of dives you have made + * Profile:: Show only the dive profile of the selected dive + * Info:: Show only the 3 tab information screen + * Three:: Show the 'default' 3 screen setup + +The Filter menu +~~~~~~~~~~~~~~~ + +This menu gives you the choice to enable or disable Events for the +selected divelog(s). At this time, you can enable or disable ascent. +When you enable ascent for your dives, within the dive profile, a yellow +marker with exclamation sign (!) will show on the points where you have +ascented. + +The Help menu +~~~~~~~~~~~~~ + +The Help menu shows only the About, which contains the version and author +information and License button. + + +[[AppendixA]] +Appendix A: Supported Dive Computers +------------------------------------ The use of libdivecomputer provides the support for divecomputers. Within the list of computers in the 'File - import' menu, you will see a listing of divecomputers. This list is covering a compatible set. Please check your users manual to check if your computer will be supported. - Supported divecomputers: + Supported divecomputers:: - Atomics: + Atomics:: Cobalt - Cressi: + + Cressi:: Edi - Mares: + + Mares:: Icon HD Nemo Puck - Oceanic: + Air + + Oceanic:: Veo250 VT Pro - OSTC: * + + OSTC:: DR5 2N - Reefnet: + + Reefnet:: Sensus Sensus Pro Sensus Ultra - Suunto: + + Suunto:: + Cobra + 2 + 3 + D3 D9 + D4 + D4i + D6 + D6i + D9tx Eon + Gekko + HelO2 + Mosquito Solution - Viper - Viper Air - Uwatec: + Alpha + Nitrox/Vario + Stinger + Vyper + 2 + Air + Vytec + DS + Zoop + + Uwatec:: Aladin Memo Mouse Smart - Zeagle: + + Zeagle:: N2iTiON 3 * OSTC computers are listed in the pull-down menu as OSTC. All 3 types are supported. + + +[[AppendixB]] +Appendix B: Suunto Export Unpacking Script +------------------------------------------ + + #!/bin/bash + # + # Small basic example script to unpack Suunto Export files + # for the use with Subsurface + # + + echo -n "Enter the directory where you stored your Suunto Divemanager export file: " + read SuuntoExportDir + + echo -n "Enter the name of your Suunto Divemanager export file: " + read SuuntoExportFile + + echo "You have entered: $SuuntoExportDir/$SuuntoExportFile" + + cd $SuuntoExportDir + + if [ -e ./$SuuntoExportFile ]; then + mkdir SuuntoXML + cd SuuntoXML + unzip ../$SuuntoExportFile + subsurface *.xml + else + echo "Nothing found! Try again!" + fi |