1 files changed, 0 insertions, 283 deletions
diff --git a/core/serial_cp2130.c b/core/serial_cp2130.c
deleted file mode 100644
index e6fb659d1..000000000
--- a/core/serial_cp2130.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * This is code from and inspired by https://www.silabs.com/Support%20Documents/TechnicalDocs/AN792.pdf
- */
-
-#include <string.h>     // memset
-#include <stdlib.h>		// malloc, free
-#include <stdbool.h>	// bool
-/*
-#include <errno.h>      // errno
-#include <sys/time.h>   // gettimeofday
-#include <time.h>       // nanosleep
-#include <stdio.h>
-*/
-
-#include <libusb.h>
-#include <ftdi.h>
-
-#include <libdivecomputer/custom_serial.h>
-
-typedef struct cp2130_serial_t {
-	/** libusb's context */
-	struct libusb_context *context;
-	/** libusb's usb_dev_handle */
-	struct libusb_device_handle *cp2130Handle;
-	/** Should we re-attach native driver? */
-	bool kernelAttached;
-
-	long timeout;
-} cp2130_serial_t;
-
-static dc_status_t cp2130_serial_close (void **userdata);
-/*
-8.1.3. Initialization and Device Discovery
-The sample application shows the calls necessary to initialize and discover a device.
-The steps that need to be taken to get a handle to the CP2130 device are:
-1. Initialize LibUSB using libusb_init().
-2. Get the device list using libusb_get_device_list() and find a device to connect to.
-3. Open the device with LibUSB using libusb_open().
-4. Detach any existing kernel connection by checking libusb_kernel_driver_active() and using
-libusb_detach_kernel_driver() if it is connected to the kernel.
-5. Claim the interface using libusb_claim_interface().
-Here is the program listing from the sample application with comments for reference:
-*/
-static dc_status_t cp2130_serial_open (void **userdata, const char* name) {
-	// Allocate memory.
-	cp2130_serial_t *device = (cp2130_serial_t*) malloc (sizeof (cp2130_serial_t));
-	libusb_device **deviceList = NULL;
-	struct libusb_device_descriptor deviceDescriptor;
-	libusb_device *usb_device = NULL;
-	dc_status_t rc = DC_STATUS_SUCCESS;
-
-	if (device == NULL)
-		return DC_STATUS_NOMEMORY;
-
-	memset(device, 0, sizeof (cp2130_serial_t));
-
-	// Default to blocking io
-	device->timeout = -1;
-
-	// Initialize libusb
-	if (libusb_init(&device->context) != 0)
-		goto exit;
-
-	// Search the connected devices to find and open a handle to the CP2130
-	size_t deviceCount = libusb_get_device_list(device->context, &deviceList);
-	if (deviceCount <= 0)
-		goto exit;
-
-	for (int i = 0; i < deviceCount; i++) {
-		if (libusb_get_device_descriptor(deviceList[i], &deviceDescriptor) == 0) {
-			if ((deviceDescriptor.idVendor == 0x10C4) && (deviceDescriptor.idProduct == 0x87A0)) {
-				usb_device = deviceList[i];
-				break;
-			}
-		}
-	}
-	if (usb_device == NULL) {
-		rc = DC_STATUS_NODEVICE;
-		goto exit;
-	}
-
-	// If a device is found, then open it
-	if (libusb_open(usb_device, &device->cp2130Handle) != 0) {
-		rc = DC_STATUS_IO;
-		goto exit;
-	}
-
-	// See if a kernel driver is active already, if so detach it and store a
-	// flag so we can reattach when we are done
-	if (libusb_kernel_driver_active(device->cp2130Handle, 0) != 0) {
-		libusb_detach_kernel_driver(device->cp2130Handle, 0);
-		device->kernelAttached = true;
-	}
-	// Finally, claim the interface
-	if (libusb_claim_interface(device->cp2130Handle, 0) != 0) {
-		rc = DC_STATUS_IO;
-		goto exit;
-	}
-
-	*userdata = device;
-
-	if (deviceList)
-		libusb_free_device_list(deviceList, 1);
-
-	return rc;
-
-exit:
-	if (deviceList)
-		libusb_free_device_list(deviceList, 1);
-
-	(void)cp2130_serial_close((void**)&device);
-
-	return rc;
-}
-
-/*
-8.1.4. Uninitialization
-The sample code also shows the calls necessary to uninitialize a device.
-The steps need to be taken to disconnect from the CP2130 device are:
-1. Release the interface using libusb_release_interface().
-2. Reattach from the kernel using libusb_attach_kernel_driver() (only if the device was connected to the
-kernel previously).
-3. Close the LibUSB handle using libusb_close().
-4. Free the device list we obtained originaly using libusb_free_device_list().
-5. Uninitialize LibUSB using libusb_exit().
-Here is the program listing from the sample application for reference:
-*/
-static dc_status_t cp2130_serial_close (void **userdata) {
-	cp2130_serial_t *device = (cp2130_serial_t*) *userdata;
-
-	if (device == NULL)
-		return DC_STATUS_SUCCESS;
-
-	if (device->cp2130Handle)
-		libusb_release_interface(device->cp2130Handle, 0);
-	if (device->kernelAttached)
-		libusb_attach_kernel_driver(device->cp2130Handle, 0);
-	if (device->cp2130Handle)
-		libusb_close(device->cp2130Handle);
-	if (device->context)
-		libusb_exit(device->context);
-
-	free(device);
-
-	return DC_STATUS_SUCCESS;
-}
-
-/*
-8.1.5.1. Control Requests
-The example GPIO function will get/set the GPIO values with a control request. Each of the commands defined in
-section "6. Configuration and Control Commands (Control Transfers)" can be used with the LibUSB control
-request function. Each of the paramaters will map to the LibUSB function. In this example we will refer to section
-"6.6. Get_GPIO_Values (Command ID 0x20)" .
-In this command there is a bmRequestType, bRequest and wLength. In this case the other paramaters, wValue
-and wIndex, are set to 0. These parameters are used directly with the libusb_control_transfer_function and it will
-return the number of bytes transferred. Here is the definition:
-
-int libusb_control_transfer(libusb_device_handle* dev_handle, uint8_t bmRequestType, uint8_t bRequest, uint16_t wValue, uint16_t wIndex, unsigned char* data, uint16_t wLength, unsigned int timeout)
-
-After putting the defined values from section "6.6.2. Setup Stage (OUT Transfer)" in the function, this is the resulting call to get the GPIO
-
-unsigned char control_buf_out[2];
-libusb_control_transfer(cp2130Handle, 0xC0, 0x20, 0x0000, 0x0000, control_buf_out, sizeof(control_buf_out), usbTimeout);
-
-*/
-
-/*
-8.1.5.2. Bulk OUT Requests
-The example write function will send data to the SPI MOSI line. To perform writes, use the description in section
-"5.2. Write (Command ID 0x01)" to transmit data with the LibUSB bulk transfer function. Here is the definition:
-int libusb_bulk_transfer(struct libusb_device_handle* dev_handle, unsigned char endpoint,
-unsigned char* data, int length, int * transferred, unsigned int timeout)
-To perform a write to the MOSI line, pack a buffer with the specified data and payload then send the entire packet.
-Here is an example from the sample application that will write 6 bytes to endpoint 1:
-*/
-static dc_status_t cp2130_serial_write(void **userdata, const void *data, size_t size, size_t *actual) {
-	cp2130_serial_t *device = (cp2130_serial_t*) *userdata;
-	int libusb_status;
-	int bytesWritten;
-
-	if (device == NULL)
-		return DC_STATUS_SUCCESS;
-
-	unsigned char write_command_buf[14] = {
-		0x00, 0x00, // Reserved
-		0x01, // Write command
-		0x00, // Reserved
-		// Number of bytes, little-endian
-		size & 0xFF,
-		(size >> 8) & 0xFF,
-		(size >> 16) & 0xFF,
-		(size >> 24) & 0xFF,
-	};
-
-	libusb_status = libusb_bulk_transfer(device->cp2130Handle, 0x01, write_command_buf, sizeof(write_command_buf), &bytesWritten, device->timeout);
-
-	if (libusb_status != 0 || bytesWritten != sizeof(write_command_buf))
-		return DC_STATUS_IO; // Simplified for now.
-
-	libusb_status = libusb_bulk_transfer(device->cp2130Handle, 0x01, (unsigned char*) data, size, &bytesWritten, device->timeout);
-
-	if (actual)
-		*actual = bytesWritten;
-
-	if (libusb_status == 0)
-		return DC_STATUS_SUCCESS;
-	else
-		return DC_STATUS_IO; // Simplified for now.
-}
-/*
-The function will return 0 upon success, otherwise it will return an error code to check for the failure reason.
-*/
-
-/*
-8.1.5.3. Bulk IN Requests
-Note: Because there is no input to the SPI the read is commented out. The code itself demonstrates reading 6 bytes, but will
-not succeed since there is nothing to send this data to the host. This code is meant to serve as an example of how to
-perform a read in a developed system.
-The example read function will send a request to read data from the SPI MISO line. To perform reads, use the
-description in section "5.1. Read (Command ID 0x00)" to request data with the LibUSB bulk transfer function (see
-definition in "8.1.5.2. Bulk OUT Requests" , or the LibUSB documentation).
-To perform a read from the MISO line, pack a buffer with the specified read command then send the entire packet.
-Immediately after that, perform another bulk request to get the response. Here is an example from the sample
-application that will try to read 6 bytes from endpoint 1:
-*/
-
-static dc_status_t cp2130_serial_read (void **userdata, void *data, size_t size, size_t *actual) {
-	cp2130_serial_t *device = (cp2130_serial_t*) *userdata;
-	int libusb_status;
-	int bytesWritten, bytesRead;
-
-	if (device == NULL)
-		return DC_STATUS_SUCCESS;
-
-	// This example shows how to issue a bulk read request to the SPI MISO line
-	unsigned char read_command_buf[14] = {
-		0x00, 0x00, // Reserved
-		0x00, // Read command
-		0x00, // Reserved
-		// Read number of bytes, little-endian
-		size & 0xFF,
-		(size >> 8) & 0xFF,
-		(size >> 16) & 0xFF,
-		(size >> 24) & 0xFF,
-	};
-
-	libusb_status = libusb_bulk_transfer(device->cp2130Handle, 0x01, read_command_buf, sizeof(read_command_buf), &bytesWritten, device->timeout);
-
-	if (libusb_status != 0  || bytesWritten != sizeof(read_command_buf))
-		return DC_STATUS_IO; // Simplified for now.
-
-	libusb_status = libusb_bulk_transfer(device->cp2130Handle, 0x01, (unsigned char*) data, size, &bytesRead, device->timeout);
-
-	if (actual)
-		*actual = bytesRead;
-
-	if (libusb_status == 0)
-		return DC_STATUS_SUCCESS;
-	else
-		return DC_STATUS_IO; // Simplified for now.
-}
-/*
-The bulk transfer function will return 0 upon success, otherwise it will return an error code to check for the failure
-reason. In this case make sure to check that the bytesWritten is the same as the command buffer size as well as a
-successful transfer.
-*/
-
-dc_custom_serial_t cp2130_serial_ops = {
-	.userdata = NULL,
-	.open = cp2130_serial_open,
-	.close = cp2130_serial_close,
-	.read = cp2130_serial_read,
-	.write = cp2130_serial_write,
-// NULL means NOP
-	.purge = NULL,
-	.get_available = NULL,
-	.set_timeout = NULL,
-	.configure = NULL,
-	.set_dtr = NULL,
-	.set_rts = NULL,
-	.set_halfduplex = NULL,
-	.set_break = NULL
-};