diff options
Diffstat (limited to 'packaging/android/build.sh')
| -rw-r--r-- | packaging/android/build.sh | 136 |
1 files changed, 75 insertions, 61 deletions
diff --git a/packaging/android/build.sh b/packaging/android/build.sh index e271af28e..d1b069d92 100644 --- a/packaging/android/build.sh +++ b/packaging/android/build.sh @@ -21,7 +21,7 @@ # # Or just set QT5_ANDROID, ANDROID_SDK_ROOT and ANDROID_NDK_ROOT to where ever you have them. # -set -e +set -eu PLATFORM=$(uname) # (trick to get the absolute path, either if we're called with a # absolute path or a relative path) @@ -29,29 +29,50 @@ pushd "$(dirname "$0")/../../" export SUBSURFACE_SOURCE=$PWD popd +# Set build defaults # is this a release or debug build BUILD_TYPE=Debug -if [ "$1" = "release" ] || [ "$1" = "Release" ] ; then - shift - BUILD_TYPE=Release -fi -if [ "$1" = "debug" ] || [ "$1" = "Debug" ] ; then - # this is the default - still need to eat the argument if given - shift -fi - -if [ "$1" = "-buildnr" ] ; then - shift - BUILD_NR="\"$1\"" - shift -else - BUILD_NR="\"0\"" -fi +# Build-nr in the android manifest. +BUILD_NR=0 +# Should we build the desktop ui or the mobile ui? +SUBSURFACE_DESKTOP=OFF +# Which arch should we build for? +ARCH=arm + +while [ "$#" -gt 0 ] ; do + case "$1" in + Release|release) + shift + BUILD_TYPE=Release + ;; + Debug|debug) + # this is the default - still need to eat the argument if given + BUILD_TYPE=Debug + shift + ;; + -buildnr) + shift + BUILD_NR=$1 + shift + ;; + desktop) + SUBSURFACE_DESKTOP=ON + shift + ;; + arm|x86) + ARCH=$1 + shift + ;; + esac +done + +# Its needed by all sub-cmds +export ARCH # Configure where we can find things here export ANDROID_NDK_ROOT=${ANDROID_NDK_ROOT-$SUBSURFACE_SOURCE/../android-ndk-r13b} -if [ ! -z "$QT5_ANDROID" ] ; then +if [ -n "${QT5_ANDROID+X}" ] ; then echo "Using Qt5 in $QT5_ANDROID" elif [ -d "$SUBSURFACE_SOURCE/../Qt/5.8" ] ; then export QT5_ANDROID=$SUBSURFACE_SOURCE/../Qt/5.8 @@ -84,27 +105,19 @@ LIBUSB_VERSION=1.0.20 OPENSSL_VERSION=1.0.2h LIBFTDI_VERSION=1.3 -# arm or x86 -if [ "$1" = "arm" ] || [ "$1" = "x86" ] ; then - export ARCH=$1 - shift -else - export ARCH=arm -fi - if [ "$ARCH" = "arm" ] ; then - QT_ARCH="armv7" + QT_ARCH=armv7 BUILDCHAIN=arm-linux-androideabi - OPENSSL_MACHINE="armv7" + OPENSSL_MACHINE=armv7 elif [ "$ARCH" = "x86" ] ; then QT_ARCH=$ARCH BUILDCHAIN=i686-linux-android - OPENSSL_MACHINE="i686" + OPENSSL_MACHINE=i686 fi export QT5_ANDROID_BIN=${QT5_ANDROID}/android_${QT_ARCH}/bin -if [ ! -e ndk-$ARCH ] ; then - "$ANDROID_NDK_ROOT/build/tools/make_standalone_toolchain.py" --arch=$ARCH --install-dir=ndk-$ARCH --api=16 +if [ ! -e ndk-"$ARCH" ] ; then + "$ANDROID_NDK_ROOT/build/tools/make_standalone_toolchain.py" --arch="$ARCH" --install-dir=ndk-"$ARCH" --api=16 fi export BUILDROOT=$PWD export PATH=${BUILDROOT}/ndk-$ARCH/bin:$PATH @@ -114,9 +127,9 @@ export CC=${BUILDROOT}/ndk-$ARCH/bin/${BUILDCHAIN}-gcc export CXX=${BUILDROOT}/ndk-$ARCH/bin/${BUILDCHAIN}-g++ # autoconf seems to get lost without this export SYSROOT=${BUILDROOT}/ndk-$ARCH/sysroot -export CFLAGS="--sysroot=${SYSROOT}" -export CPPFLAGS="--sysroot=${SYSROOT}" -export CXXFLAGS="--sysroot=${SYSROOT}" +export CFLAGS=--sysroot=${SYSROOT} +export CPPFLAGS=--sysroot=${SYSROOT} +export CXXFLAGS=--sysroot=${SYSROOT} # Junk needed for qt-android-cmake export ANDROID_STANDALONE_TOOLCHAIN=${BUILDROOT}/ndk-$ARCH if [ "$PLATFORM" = "Darwin" ] ; then @@ -133,8 +146,8 @@ if [ ! -e sqlite-autoconf-${SQLITE_VERSION} ] ; then tar -zxf sqlite-autoconf-${SQLITE_VERSION}.tar.gz fi if [ ! -e "$PKG_CONFIG_LIBDIR/sqlite3.pc" ] ; then - mkdir -p sqlite-build-$ARCH - pushd sqlite-build-$ARCH + mkdir -p sqlite-build-"$ARCH" + pushd sqlite-build-"$ARCH" ../sqlite-autoconf-${SQLITE_VERSION}/configure --host=${BUILDCHAIN} --prefix="$PREFIX" --enable-static --disable-shared make make install @@ -148,8 +161,8 @@ if [ ! -e libxml2-${LIBXML2_VERSION} ] ; then tar -zxf libxml2-${LIBXML2_VERSION}.tar.gz fi if [ ! -e "$PKG_CONFIG_LIBDIR/libxml-2.0.pc" ] ; then - mkdir -p libxml2-build-$ARCH - pushd libxml2-build-$ARCH + mkdir -p libxml2-build-"$ARCH" + pushd libxml2-build-"$ARCH" ../libxml2-${LIBXML2_VERSION}/configure --host=${BUILDCHAIN} --prefix="$PREFIX" --without-python --without-iconv --enable-static --disable-shared perl -pi -e 's/runtest\$\(EXEEXT\)//' Makefile perl -pi -e 's/testrecurse\$\(EXEEXT\)//' Makefile @@ -167,8 +180,8 @@ if [ ! -e libxslt-${LIBXSLT_VERSION} ] ; then cp libxml2-${LIBXML2_VERSION}/config.sub libxslt-${LIBXSLT_VERSION} fi if [ ! -e "$PKG_CONFIG_LIBDIR/libxslt.pc" ] ; then - mkdir -p libxslt-build-$ARCH - pushd libxslt-build-$ARCH + mkdir -p libxslt-build-"$ARCH" + pushd libxslt-build-"$ARCH" ../libxslt-${LIBXSLT_VERSION}/configure --host=${BUILDCHAIN} --prefix="$PREFIX" --with-libxml-prefix="$PREFIX" --without-python --without-crypto --enable-static --disable-shared make make install @@ -182,8 +195,8 @@ if [ ! -e libzip-${LIBZIP_VERSION} ] ; then tar -zxf libzip-${LIBZIP_VERSION}.tar.gz fi if [ ! -e "$PKG_CONFIG_LIBDIR/libzip.pc" ] ; then - mkdir -p libzip-build-$ARCH - pushd libzip-build-$ARCH + mkdir -p libzip-build-"$ARCH" + pushd libzip-build-"$ARCH" ../libzip-${LIBZIP_VERSION}/configure --host=${BUILDCHAIN} --prefix="$PREFIX" --enable-static --disable-shared make make install @@ -193,16 +206,16 @@ fi if [ ! -e openssl-${OPENSSL_VERSION}.tar.gz ] ; then wget -O openssl-${OPENSSL_VERSION}.tar.gz http://www.openssl.org/source/openssl-${OPENSSL_VERSION}.tar.gz fi -if [ ! -e openssl-build-$ARCH ] ; then +if [ ! -e openssl-build-"$ARCH" ] ; then tar -zxf openssl-${OPENSSL_VERSION}.tar.gz - mv openssl-${OPENSSL_VERSION} openssl-build-$ARCH + mv openssl-${OPENSSL_VERSION} openssl-build-"$ARCH" fi if [ ! -e "$PKG_CONFIG_LIBDIR/libssl.pc" ] ; then - pushd openssl-build-$ARCH + pushd openssl-build-"$ARCH" perl -pi -e 's/install: all install_docs install_sw/install: install_docs install_sw/g' Makefile.org # Use env to make all these temporary, so they don't pollute later builds. env SYSTEM=android \ - CROSS_COMPILE="${BUILDCHAIN}-" \ + CROSS_COMPILE=${BUILDCHAIN}- \ MACHINE=$OPENSSL_MACHINE \ HOSTCC=gcc \ CC=gcc \ @@ -226,8 +239,8 @@ fi if [ ! -e "$PKG_CONFIG_LIBDIR/libgit2.pc" ] ; then # We don't want to find the HTTP_Parser package of the build host by mistake perl -pi -e 's/FIND_PACKAGE\(HTTP_Parser\)/#FIND_PACKAGE(HTTP_Parser)/' libgit2-${LIBGIT2_VERSION}/CMakeLists.txt - mkdir -p libgit2-build-$ARCH - pushd libgit2-build-$ARCH + mkdir -p libgit2-build-"$ARCH" + pushd libgit2-build-"$ARCH" cmake -DCMAKE_SYSTEM_NAME=Android -DSHA1_TYPE=builtin \ -DBUILD_CLAR=OFF -DBUILD_SHARED_LIBS=OFF \ -DCMAKE_INSTALL_PREFIX="$PREFIX" \ @@ -264,8 +277,8 @@ if [ ! -e libusb-${LIBUSB_VERSION}/configure ] ; then popd fi if [ ! -e "$PKG_CONFIG_LIBDIR/libusb-1.0.pc" ] ; then - mkdir -p libusb-build-$ARCH - pushd libusb-build-$ARCH + mkdir -p libusb-build-"$ARCH" + pushd libusb-build-"$ARCH" ../libusb-${LIBUSB_VERSION}/configure --host=${BUILDCHAIN} --prefix="$PREFIX" --enable-static --disable-shared --disable-udev --enable-system-log # --enable-debug-log make @@ -280,8 +293,8 @@ if [ ! -e libftdi1-${LIBFTDI_VERSION} ] ; then tar -jxf libftdi1-${LIBFTDI_VERSION}.tar.bz2 fi if [ ! -e "$PKG_CONFIG_LIBDIR/libftdi1.pc" ] && [ "$PLATFORM" != "Darwin" ] ; then - mkdir -p libftdi1-build-$ARCH - pushd libftdi1-build-$ARCH + mkdir -p libftdi1-build-"$ARCH" + pushd libftdi1-build-"$ARCH" cmake ../libftdi1-${LIBFTDI_VERSION} -DCMAKE_C_COMPILER="$CC" -DCMAKE_INSTALL_PREFIX="$PREFIX" -DCMAKE_PREFIX_PATH="$PREFIX" -DSTATICLIBS=ON -DPYTHON_BINDINGS=OFF -DDOCUMENTATION=OFF -DFTDIPP=OFF -DBUILD_TESTS=OFF -DEXAMPLES=OFF -DFTDI_EEPROM=OFF make make install @@ -293,8 +306,8 @@ if [ -e "$PREFIX/lib/libftdi1.so" ] ; then fi if [ ! -e "$PKG_CONFIG_LIBDIR/libdivecomputer.pc" ] ; then - mkdir -p libdivecomputer-build-$ARCH - pushd libdivecomputer-build-$ARCH + mkdir -p libdivecomputer-build-"$ARCH" + pushd libdivecomputer-build-"$ARCH" "$SUBSURFACE_SOURCE"/../libdivecomputer/configure --host=${BUILDCHAIN} --prefix="$PREFIX" --enable-static --disable-shared --enable-examples=no make make install @@ -314,7 +327,7 @@ fi if [ "$SUBSURFACE_DESKTOP" = "ON" ] ; then SUBSURFACE_MOBILE= else - SUBSURFACE_MOBILE="ON" + SUBSURFACE_MOBILE=ON fi if [ "$SUBSURFACE_MOBILE" = "ON" ] ; then @@ -324,12 +337,13 @@ if [ "$SUBSURFACE_MOBILE" = "ON" ] ; then fi if [ ! -z "$SUBSURFACE_MOBILE" ] ; then - mkdir -p subsurface-mobile-build-$ARCH - cd subsurface-mobile-build-$ARCH - MOBILE_CMAKE="-DSUBSURFACE_TARGET_EXECUTABLE=MobileExecutable" + mkdir -p subsurface-mobile-build-"$ARCH" + cd subsurface-mobile-build-"$ARCH" + MOBILE_CMAKE=-DSUBSURFACE_TARGET_EXECUTABLE=MobileExecutable else - mkdir -p subsurface-build-$ARCH - cd subsurface-build-$ARCH + MOBILE_CMAKE="" + mkdir -p subsurface-build-"$ARCH" + cd subsurface-build-"$ARCH" fi # something in the qt-android-cmake-thingies mangles your path, so thats why we need to hard-code ant and pkg-config here. @@ -375,7 +389,7 @@ if [ ! -z "$SUBSURFACE_MOBILE" ] ; then rm -rf android-mobile cp -a "$SUBSURFACE_SOURCE/android-mobile" . - sed -i -e "s/@SUBSURFACE_MOBILE_VERSION@/\"$SUBSURFACE_MOBILE_VERSION\"/;s/@BUILD_NR@/$BUILD_NR/" android-mobile/AndroidManifest.xml + sed -i -e "s/@SUBSURFACE_MOBILE_VERSION@/$SUBSURFACE_MOBILE_VERSION/;s/@BUILD_NR@/$BUILD_NR/" android-mobile/AndroidManifest.xml else SUBSURFACE_VERSION=$(grep CANONICAL_VERSION_STRING ssrf-version.h | awk '{ print $3 }' | tr -d \") |