| Age | Commit message (Collapse) | Author |
|---|
|
Some UI texts were missing translation, such as:
"for selected dive"
"for all dives"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The "Tec settings" dialog contains some strings with the
subscript "2" character, which have to be translated. While
the "2" is part of the string xgettext doesn't seem to recognize
such. To trick it we use a temporary buffer and c-format:
sprintf(utf8_buf, _("Show pO%s graph"), UTF8_SUBSCRIPT_2);
button = gtk_check_button_new_with_label(utf8_buf);
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
init_ui():
We add the char pointer "conf_copy" and free it afterwards, since
once "next_token" is changed it no longer points to the allocated heap
location the mapper returned.
[Dirk Hohndel: original patch rewritten to have better variable names and
to match the recent changes to this code]
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
From the GTK docs on gtk_tree_model_get_path():
"Returns a newly-created GtkTreePath referenced by iter.
This path should be freed with gtk_tree_path_free()."
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now store the model information together with the deviceid and nickname
in order to be able to check if we have a record for any dive computer
with the same model (as that now triggers our nickname dialog).
This changes the format of the config entries for nicknames - the best
solution might be to just delete those and start again.
What is still missing is the code to store the nicknames in the XML file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Having it there with the model information seemed to make sense but on
second thought it's the wrong spot to keep that information, especially
since we were storing it in the XML file in every single dive.
This change removes the nickname member from the divecomputer and makes
the rest of the code reasonably self consistent. It does not add much of
the new code for the new design to handle nicknames.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will normally happen for CCR dives with a set pO2. The old
calculations was only valid for OC dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Previously we had lots of zeros and some non-sensical data displayed (the
temp values were actually not zeroed out).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If all selected dives appear to have numbers that make sense, assemble a
string that lists the selected dives (and try to be smart about finding
ranges) and display those in the frame of the statistics widget.
The code sets an arbitrary length limit on that list of dive numbers and
tries to be smart about creating an ellipsis if necessary.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some acronyms (SAC, OLF, OTU) were not translated since
there's no settled/common ones in russian.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Miika's xslt patch creates correct XML data without divecomputer entries.
What happens is that the stop information at xml parse time is only
cleared by the divecomputer entries, so if the XML lacks them, we will
bleed stop data from one dive to the next.
This patch makes sure that the deco/ndl information is cleared even if the
dive has no divecomputer entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch correctly converts the available deco data from JDiveLog files.
In order for this to work correctly the next patch from Linus is needed as
well.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds the capability to actually view all your dive computers, by
adding a menu item under "Log"->"View"->"Next DC" to show the next dive
computer.
Realistically, if you actually commonly use this, you'd use the
accelerator shortcut. Which right now is Ctrl-C ("C for Computer"),
which is probably a horrible choice.
I really would want to have nice "next/prev dive" accelerators too,
because the cursor keys don't work very well with the gtk focus issues.
Being able to switch between dives would also make the "just the dive
profile, maam" view (ctrl-2) much more useful.
The prev/next dive in the profile view should probably be done with a
keyboard action callback, which also avoids some of the limitations of
accelerators (ie you can make any key do the action). Some gtk person,
please?
Anyway, this commit only does the dive computer choice thing, and only
using the accelerators.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This changes two things to improve the appearance of the profile:
- the partial pressure scale is now in 0.5 increments if the total is <= 4
and in 1.0 increments if it is > 4.
- the depth marker lines end slightly below the depth chart so that we no
longer have overlap between the depth scale and the partial pressure
scale.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In profile.c:create_plot_info(), store the last address in which
memory was allocated for the plot data entries in the static
variable "last_pi_entry". If "last_pi_entry" isn't a NULL
pointer in each call to create_plot_info(), free memory at that
address.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In gtk-gui.c:expose_event(), right before clearing the list of tooltips,
we also want to free memory for the associated texts for each one of them.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In gtk-gui.c:init() we retrieve the configuration values
for PO2, PN2, PHE thresholds but have to also free the values
once done parsing with sscanf().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In render_dc_vendor() and render_dc_product(), there is
no need to allocate memory for the texts that are about to
be added in the combo box trees. Most GTK widgets seem to make
copies of the passed text to them, using g_strdup() and
automatically release said memory when a widget is destroyed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We had logic to remove duplicate dive computer information after merging
dives, but it didn't actually work.
Why? Because we had used the 'res' dive computer pointer to traverse the
list of dive computers, so it no longer actually pointed to the first
dive computer in the result list any more, and so the "remove redundant"
code only removed redundant dive computers from a limited and incomplete
list.
Oops.
Also, before checking the whole event and sample list, check if it's the
exact same dive computer using our new "match_one_dc()" helper function,
and don't even bother checking for sample details if it is.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we have a dive computer model and dive ID, use that to match newly
downloaded dives against the existing dives.
Otherwise fall back to "exact date match" again, like we've always done.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we havd divecomputer model and dive ID information available, use
that to match existing dives when trying to merge them.
Otherwise fall back to the fuzzy time-based merging logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the sizes of the two char buffers in set_dc_nickname() (nickname)
and remember_dc() (buffer) are at least twice the size of the allowed
maximum number of characters (sizeof(gunichar) = 2) set by
gtk_entry_set_max_length() for the user nickname,
no truncation will accur then calling snprintf() and cleanedup_nickname()
on said buffers.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The idea behind editing timestamps had of course been the typical "oops, I
forgot to set my time correctly" which shifts a dive (or a few of them) by
a few hours but keeps the overall order of dives the same).
But reasonable people might argue that they can envision a scenario where
more dramatic changes are being made. And we need to deal with the impact
this has on dive trips.
Here we handle a couple of simple cases:
- this is the only dive in a trip; just update the trip
(this can still cause problems if the new time is in the middle of an
existing trip).
- this dives moves before the start of the trip it is in; let's remove it
from that trip (this response is a bit simplistic - but as I tried to
say, I don't expect this to be a common use case; and removing it at
least doesn't lead to entirely unexpected behavior).
- this dive moves past the end of this trip into the range of a different
trip (in this case we remove the dive from the current trip and allow it
to interrupt the trip it is moving into).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
in gtk-gui.c:
The input text field in set_dc_nickname() has a limit of 68 unicode
characters, which are 136 bytes. In remember_dc(), to make sure
that this nickname, the deviceid (4 bytes) and also the extra
characters (",{}") always fit wihout truncation (from snprintf) in the
allocated stack buffer, we increase the size of the buffer to 256 bytes.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Silly typo, but this is the better solution, anyway.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>`
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We maintain a list of dive computers that we know about (by deviceid) and
their nicknames in our config. If the user downloads dive from a dive
computer that we haven't seen before, we give them the option to set a
nickname for that dive computer. That nickname is displayed in the profile
(and stored in the XML file, assuming it is not the same as the model).
This implementation attempts to make sure that it correctly deals with
utf8 nicknames.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A vendor of -1 indicates that we should have no product selection in the
dive download dialog. Having the empty product model be the last made it
hard to keep the correct index for that empty model around (and we got it
wrong by default).
With this change the product models are offset by one, so the unset vendor
(-1) turns into index 0 which is where we now store the empty model.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't want to directly use the strings returned to us from
libdivecomputer.
Fixes bug 34
Reported-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This dependency was brought in by commit 3e51d56f87a3 "Improve on
divecomputer data handling".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Showing the depth scale all the way to the bottom of the profile plot
looks strange when there are partial pressure graphs down there. So
instead we only plot down to the next marker below the maximum depth of
the actual dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we have per-sample CNS values, then show them in the profile tooltip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I keep forgetting to do that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I foolishly changed visible_columns in both the (ill-named) cns branch and
master...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conflicts:
divelist.c
gtk-gui.c
profile.c
|
|
Early in the libdivecomputer 0.3 development cycle Jef and I implemented
deco and ndl as events. That wasn't a wise design choice and we agreed to
switch this to be instead new sample types which makes much more sense
(and is much more aligned with the way we are handling them inside
Subsurface). So this commit tracks the change in libdivecomputer. Since
this happened during the development cycle there isn't a way to detect
this at compile time - so you need to make sure you have a matching
version of libdivecomputer when compiling Subsurface.
To make this easier: this commit of Subsurface requires a libdivecomputer
version that includes the libdivecomputer commit d5d44c1e0ffd "Convert
decostop / ndl to samples".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This splits the dive time, depth, pressure and temperature maxima and
minima setup from the per-dive-computer "create_plot_info()" function
into one setup function that walks _all_ the dive computers, so that we
have a global maxima and minima.
That way the graph scaling we set up will now fit the data from all dive
computers rather than just the particular one we are plotting. So if
you switch back-and-forth between computers, the scale (which is defined
by the extremes) remains the same.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We either pick the CNS reported by the dive computer at the end of the
dive, or the maximum of that and the CNS values in the samples, if any.
As usual, this column in the dive list defaults to off and it is
controlled by a setting in the tec page of the preferences.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This can cause some fun unintended side effects - especially when the dive
is part of a trip and the new date/time moves this into a different trip.
Instead, trips get split and the overall result is consistent, but a bit
unexpected.
But since this is designed to help people right after a dive import in
case the clock on the dive computer was wrong, my guess is this won't ever
be a problem for actual users.
Fixes ticket 18
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I don't understand how this ever worked...
Fixes ticket 32
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This fixes ticket 33
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This allows you to open the preference dialog, play with settings and see
their effect right away. Press OK and you keep them, press Cancel and you
are back to the previous state. As it should be.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now we can simply remember the state of all the preferences at the
beginning of preferences_dialog() and restore them if the user presses
'Cancel'.
Fixes #21
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We made the one in gtk-gui.c a global function and now had a clash with
the static one in statistics.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add info of the used tanks, which isn't displayed by the
dive plot, with a new function.
The relative width and height are fixed in print(), so the function needs:
- Modify the font size depending on the number of tanks.
- As it uses translations, return to the original coords when ends.
Modify print() acordingly with the new function.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Create a function show_dive_header() and show_dive_notes() as a first step
to introduce other infos in diferent funcs.
Modify print() acordingly to the new funcs.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We were responding to the wrong Quit signal on MacOS. The one we picked
was the one that basically told us "it's too late to stop me, I'm
quitting". I switched this to the one asking "should I prevent the app
from quitting" and now we can indeed cancel the Quit, regardless which
method was used to close the app.
Also removes to unused variables.
Fixes #22
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead provide a scale on the right in a highly transparent grey and rely
on the tooltip available with mouse-over to pinpoint the value at certain
spots with much better accuracy.
Fixes #30
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some dive computers appear to tell us the gas used in a gaschange event
right at the beginning of the dive. We arbitrary have a cut-off that says
"a gas change in the first 30 seconds shouldn't get a marker".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Regardless what the dive computer tells us, don't believe that pO2 was
higher than the ambient pressure. This gives much more realistic values.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This now takes the He percentage into account when matching tanks. Given
the encoding of fO2 and fHe in the GASCHANGE2 event, we can simply mask
and shift as if we have a GASCHANGE2 event and things will automatically
work correctly for the regular GASCHANGE event.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Lubomir I. Ivanov
Dirk Hohndel
Sergey Starosek
Linus Torvalds
Miika Turkia
Salvador Cuñat