| Age | Commit message (Collapse) | Author |
|---|
|
This backs off a little on what was added in commit c1102a38f359 ("More
gradient on the partial pressure graph.") - the numbers simply got too
busy. I also slightly changed the positioning of the numbers to be a
little more "natural looking".
Fixes #323
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The layout of Subsurface on Gnome 3 had a few flaws, since Qt and Gtk
are not really compatible. This implements a CSS that makes the use
of Gnome 3 more pleasant to the eyes.
Fixes #318
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
References to literature on gradient factors changed (see dive profile
section, also preferences section)
Section on preference settings added.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Hitting apply in the preferences dialog causes a QList assert.
This led to DiveListView::reloadHeaderActions(), where
we have an out of range access.
Patch makes the column count match the header action count.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This requires us to expose the progressBar as a private
class member.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
In the PrintLayout constructor we receive a pointer
of PrintDialog, but the type is incomplete, as we only
forward declare it in the class header. If we decide
to eventually call a method from PrintDialog we also
need to include printdialog.h in printlayout.cpp.
The patch also fixes a similar issue in printdialog.h.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
printTable() now emits a 'signalProgress'
to the PrintDialog's progress bar, but it has 3 stages (loops):
- pupulate a model
- process all rows
- render the table in pages
This requires that we also separate the progress in 3 stages
of 33%.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
printProfileDives() now emits a 'signalProgress' each
time a dive is done processing.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
estimateTotalDives() is used to calculate the total dives
to be printed, it requires a 'struct dive' pointer
and a couple of 'int' pointers for the iterator 'i' and
'total' return.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The dialog was missing a 'Close' button so we add it.
Also change the mnemonic of the 'Preview' button, as it
was the same as the one for print 'Print'.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
I don't recall why but this dialog ended with a fixed size
(setFixedSize()), so it has to be re-adjusted each time a change
is made in there. We resize it to compensate for the addition
of the progress bar.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
We rename our old 'Print' button to 'Preview' (as it did just that),
and add a new one called 'Print' which does the direct printing,
by creating a QPrintDialog instance. Both buttons are located
on top of the dialog for now in a QHBoxLayout.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
The entire dialog is 'temporary' and should be replaced,
so we slightly modify the comment about the PrintOptions widget.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
This dialog will be eventually replaced by a better one, but
for now we can add a progress bar to it. Next step would be to
add separate Print/Preview buttons and emit progress bar updates
from the PrintLayout class.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
|
|
It's very confusing when a parameter is called "minutes" but holds
seconds...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't want to add the last sample - the dive plan functions want to
figure out the path to the surface by themselves and get confused by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch attempts to fix the 'click goes to 0,0' bug on the
globe. it moves a bit of code around and I particulary don't
like the way that we are dealing with 'EditMode', I think I'll
refactor that for 4.1. We are alredy dealing with a bunch
of states, maybe a State Machine will help on removing code-complexity.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Selects the newly added dive after adding it, it uses a
rather ugly hack that forced a unselected dive to be
marked as 'selected' so we can remember what was the
newly added dive, and select it after.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
NDL and TTS doesn't show up in the printed profiles, and it takes
significant time to calculate, so just don't do it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When editing a trip the key for the notesBackup is NULL. Don't call
fixup_dive() on that...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Made changes to dive profile section.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
subsurface.pro already useses that.
For consistency with the app, we use swap 4 spaces with
a tab character for indentation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
"'GIT_DIR' is not recognized as an internal or external command",
is reported if qmake is runned on Win32.
To solve that we set a explicit syntax for Win32 that uses "Set.."
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We need to espace the backslash with '\\' on win32.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
An addition to the "Move dive notes edit message above the
scrollable widget" commit: Make sure the save/cancel message is
always displayed on top, regardless of which tab is selected.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- Removed the "Visible:" header on the column selector. It doesn't
have to be there, and it's not in the similar equipment column selector
- PO2 --> pO₂ (and others)
- Use same initial case in the units selector in preferences
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch adds legend for the partial gass pressures if the
graphs are active. when enabling / disabling the square
that represents the color of a gas will also appear / disappear.
Fixes: #272
[Dirk Hohndel: minor changes to layout and whitespace]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The "Save" and "Cancel" buttons disappeared when scrolling to the
bottom of the notes widget.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the 'mouseClicked' didn't get any dives at the click-geolocation,
ignore it and do not try to select an empty selection. this was
causing a lot of issues when map-navigation.
Also, good deal of code cleanup.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Manually done by only replacing unfinished translations (and one where an
English term was used as translation).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As always, I am not the author, just pulling into Subsurface.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Let's ALWAYS support the somewhat "international standard" N/S/W/E
characters, but ALSO support localized versions.
Fixes #315
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
commit 3c064d58578f ("Make the message when editing a dive fit better")
kinda fixed the wrong problem. A better solution was suggested - just drop
the instructions regarding Cancel / Safe. It's quite obvious what to do
mow that the buttons are part of the message.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For the names that we have in our "default set" we need to store the
English name so Subsurface will "do the right thing" when opening the file
in a different locale.
With manually entered names in a local language there's not much we can
do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Due to that we can't handle gaschanges to the same gas in another
cylinder, this changes the second gas to EAN22 to workaround that.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Leftover from previous code that called get_gas_string
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This piece of code didn't need to be on the for-loop, so
let's remove it out of it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The old code ( slow++ ) ignored that each new dive-selection
we recreated all information on the profile window, so this
version ( a lot more verbose, I know. ) will ignore all dives
that are being selected and will only send the 'dive was selected'
information in the last line of the algorithm, instead of calling
it for each dive on the list of 'to be selected' dives.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Still trying to fix the same issue that I already tried to address in
commit e0b70b82cad9 ("Fix translation of weightsystem names") and before
in commit dc03b7e7d689 ("We need the correct context to translate event
names").
I missed the WeightModel. Hopefully this was indeed the real fix.
Fixes #312
(I know, I keep saying that)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should keep the message widget visible without horizontal scroll bar,
even on fairly small screens.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The button box on the bottom of the window made it a bit cluttered
on small screens, this patch uses the window of the MessageWidget
to show the butons - this way less space is used and things are better
spaced on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch adds a context menu to set the dive location
via the globe, being the dive with a coordinate or not.
It also fixes setting the dive location on edit mode.
Fixes: #315
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We add the "maximized" entry for the settings group "MainWindow",
and store it on close, so that the window state is the same on
the next run. But then also, we only store the window size and resize
to that size if not maximized. This attempts to preserve a "restored"
window size.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As usual, I am not the author, just the person pulling from Transifex.
Authorship is tracked there (rather badly).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is very much the same as in commit dc03b7e7d689 ("We need the correct
context to translate event names"). I didn't pay enough attention when
reading the bug report and missed that the weight system names were also
not correctly translated.
Fixes #312
(I hope this time for real)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I have added a section about importing dives from other electronic
sources. There are some potential problems, because I know that the
intercation with divelogs.de is not yet fully functional
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When editing air or water temperature, you are actually editing the
information in the active divecomputer structure. But the Dive Info shows
the summary data created from the temperature data in all dive computers.
For most people who will only ever have one divecomputer per dive this may
seem like an artificial distinction, but it's very important if you track
more than one computer.
So in order to have an edit reflected in what's shown, we must redo the
"summary creation" for data from the different divecomputers into the
summary fields of the dive.
Fixes #313
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Qt assumes that all strings are in the context of the class in which you
use them. So when we want to display the translated event names from
within the ProfileGraphicsView we need to make it explicit that these are
strings that come from the C part of the code.
Doing that showed another bug in the code where we foolishly compared the
translated text to a fixed string. Not smart.
Fixes #312
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Tomaz Canabrava
Willem Ferguson
Lubomir I. Ivanov
Anton Lundin
Henrik Brautaset Aronsen
Sergey Starosek