summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-08-13Use QXmlStreamReader for xml restoreGravatar Joseph W. Joshua
This patch changes reading of OSTC 3 settings backup xml from libxml to QXmlStreamReader to match the use of QXmlStreamWriter in the xml saving. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Change Dive Computer Configuration dialogGravatar Joseph W. Joshua
Changes the layout of the ConfigureDiveComputer dialog to use a list of supported computers on the left, with a stacked widget showing the configurable details. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Use QXmlStreamReader for dive computer settings backupGravatar Joseph W. Joshua
This patch changes the code in the ConfigureDiveComputer class to use QXmlStreamWriter instead of an hardcoded xml structure. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Use macros for OSTC 3 setting codesGravatar Joseph W. Joshua
Changes the classes in configuredivecomputerthreads.cpp to use macros to hold the setting hex codes. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Start Work on Firmware UpdateGravatar Joseph W. Joshua
This patch implements the first step towards OSTC 3 firmware update. Its not much, just file selection, but I will build up on it from there. Implements a thread to initiate firmware updates. Currently, this is for the OSTC 3. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Add read/write support for OSTC 3 SetPoint settingsGravatar Joseph W. Joshua
Implements support for reading, writing and backup/restore of set point settings for the OSTC 3. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Add reading and writing of OSTC 3 Dil valuesGravatar Joseph W. Joshua
Implements reading, writing and backup/restore of OSTC 3 Dil Values (setting 0x15 to 0x19) Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Backup/Restore of OSTC3 Gas SettingsGravatar Joseph W. Joshua
Implements backup and restore for OSTC3 Gas Settings. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Implement saving of OSTC3 Gas SettingsGravatar Joseph W. Joshua
Implements writing OSTC3 gas settings to the device. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Read OSTC3 GasSetting ValuesGravatar Joseph W. Joshua
Implements the reading of OSTC3 Gas Settings. These are settings 0x10 to 0x14 Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Move non gui code from qt-uiGravatar Joseph W. Joshua
Moves non gui classes (configuredivecomputer, configuredivecomputerthreads and devicedetails) from qt-ui to the top level folder. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Start working on GAS and DIL tablesGravatar Joseph W. Joshua
Start work for gas1-5 and dil1-5. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13THIS COMMIT NEEDS A COMMIT MESSAGEGravatar Joseph W. Joshua
I've moved the .pro file fixes to where it happened, so the rest of the changes need explanation now. -Thiago Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Add more OSTC 3 settingsGravatar Joseph W. Joshua
I am adding more OSTC 3 settings as I go along. Here, I have added dive mode and saturation. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Change ConfigureDiveComputerDialog to use tabbed interfaceGravatar Joseph W. Joshua
Changes the dive computer configuration dialog to use a tabbed interface. This will make it easier to add new dive computer models to the interface. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Add Support for more OSTC 3 SettingsGravatar Joseph W. Joshua
Adds support for more OSTC 3 Settings to the reading, writing, backup and restore functions. These settings are: last deco, units, sampling rate, salinity, dive mode colour and compass gain. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Working XML Backup and RestoreGravatar Joseph W. Joshua
The ConfigureDiveComputer class now has functions for complete XML backup and restore. These dump the loaded settings on a dive computer to an XML file, and there is an option to restore them. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Backup basic settings as XMLGravatar Joseph W. Joshua
This patch enables XML backup. We can now save the settings to an XML file. Currently this backs up just the basic stuff such as custom text, language and brightness. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Port writing of date and time to new classesGravatar Joseph W. Joshua
After splitting dive computer configuration classes, the date/time setting had not been ported. This adds the same to the classes. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-13Polish up on classesGravatar Joseph W. Joshua
This patch polishes up on all classes added for dive computer configuration to give a clean workflow. The classes can now write and read data from the OSTC 3. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-09Move divecomputer configuration code to different filesGravatar Joseph W. Joshua
This splits the code in configuredivecomputer.cpp into multiple files. The read and write threads are moved to configuredivecomputerthreads.h/cpp, and the device details class is moved to devicedetails.h/.cpp Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-09Add brightness settingGravatar Joseph W. Joshua
Adds a setting to control the device's brightness. Currently I have only the OSTC 3. Will add more afterwards. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-09Improve writing of device name to dive computers.Gravatar Joseph W. Joshua
Improves the writing of device name to the dive computer. The code has been updated to use a switch statement. This will make it easier to add new devices in the future. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-09Improve writing of date and time to dive computerGravatar Joseph W. Joshua
Improves writing of date and time to the dive computer. This has been tested using the Heinrichs Weikamp OSTC-3. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-09Change dive computer family detectionGravatar Joseph W. Joshua
Following suggestions on the mailing list, this changes the method used to detect the dive computer family. Detection is now done using: dc_device_get_type. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-09Create class to write settings to dive computerGravatar Joseph W. Joshua
Adds a class to write settings to dive computer, and modifies the existing ones to integrate it. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-09Read basic details from dive computerGravatar Joseph W. Joshua
Added classes for reading data from dive computer. This is at the basic level and I will expand it as I go along. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-09Load vendor list and product listGravatar Joseph W. Joshua
Using code from 'downloadfromdivecomputer' class, this code loads the vendors and products to the respective comboboxes. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-09Create Dive Computer configuration dialogGravatar Joseph W. Joshua
Create a dialog for reading and writing settings to and from dive computers, with a menu entry in MainWindow to open the dialog. I will build up on this dialog and change it as needed. Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com> Signed-off-by: Thiago Macieira <thiago@macieira.org>
2014-08-08Change version to 4.2v4.2Gravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-08Add latest html files for user manualGravatar Dirk Hohndel
These are used when building from source without asciidoc installed. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-08Pull latest translations from TransifexGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-08Update spanish translation of user manual to english c1026f5Gravatar Salvador Cuñat
And fixes a little typo. Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-08Better User Agent for SubsurfaceGravatar Dirk Hohndel
This one is less verbose and very easy to parse. It's guaranteed to have five components, separated by ':' with no other ':' in the string: Subsurface:<version>:<PrettyOSName>:<appCpuArch[/osCpuArch]>:<UILang> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-08Revert "Don't translate components of the version"Gravatar Dirk Hohndel
This reverts commit 6fdbf2069df4f238d7966fef67a31cee5c5eddbb. That was actually the wrong thing to do, now that I think about it. Instead we should show the translated version on screen and send a compact, easy to parse variation of this as the User-Agent header. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-08Fix possible crash attempting network connectionGravatar Dirk Hohndel
If we didn't get back a JSON encoded string (i.e., if the response contained no '"') we would access a QList past its boundary. I'm somewhat hopeful that this is a last second fix for an annoying bug I've been trying to figure out for a while. See #514 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-08Don't translate components of the versionGravatar Dirk Hohndel
When transmitting the Subsurface version string we always want to use the English terms, not the localized terms. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07User manual: Delete images using dustbin iconGravatar Willem Ferguson
Madification in text to reflect change in UI after the dustbin icon has been moved in thumbnails of photos. Two images in the manual were replaced. Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Improve wording on ReleaseNotesGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Improve wording on READMEGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Include SupportedDivecomputers.txt with the bundled docsGravatar Dirk Hohndel
After all, it's referenced in the ReleaseNotes.txt and the README Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Improve generation of list of supported dive computersGravatar Dirk Hohndel
Get it straight from the libdivecomputer sources used... Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Update ReleaseNotes and README for the upcoming release of 4.2Gravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Paint the middle of the trashbin white.Gravatar Tomaz Canabrava
Fixes #697 Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Move the Trash bin to the topRight on the picturesGravatar Tomaz Canabrava
It was too easy to remove a picture by mistake, not anymore. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Update russian translation of the user manualGravatar Sergey Starosek
Aligned with english version c1026f5975bb Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Update spanish translation of user manual to english 150783fGravatar Salvador Cuñat
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Reload the dive list after accepting changesGravatar Dirk Hohndel
So far we only did it when we added a dive or modified a manually added dive. But the reality is that an edit of any dive could cause changes that require the dive list to be reloaded. Fixes #698 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07Update russian translation of the user manualGravatar Sergey Starosek
Aligned with english version 150783f180f Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-08-07User manual: Add text explaining delete of photos from the Photos tabGravatar Willem Ferguson
This text addresses issues about the deletion of photos using the Photos tab. It also deals with interpreting information regarding photos laocated on an external drive that is not connected to the PC. Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2025-01-02 21:44:22 +0000