| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Ignore QWebView instances in the preferences dialog when compiling under
Android, as QWebView is not yet supported under Android.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I could have sworn we did this at some point. The vendors are already
sorted, but the products for each vendor should be sorted, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems to work well and provides a lot less wasted space.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After a partial download (because the user hits cancel or because there
was an error, if the user hits Retry the list of dives downloaded so far
should be cleared because we will simply try to re-download the same dives
again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will crash if for some reason current_dive is invalid.
And in general, when displaying information, we want to use the correct dc
in the displayed_dive, not the current_dc, which references the
current_dive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
... and repair a failed rebase (sorry).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When changing to a CCR dive, add a setpoint change to the default setpoint
at the beginning of the dive. Otherwise add an explicit setpoint change to 0
.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
still needs some work
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Calculations for passive semi-closed rebreathers are pretty much like OC except
the pO2 is lower bey a certain (SAC dependent) factor. This patch introduces the
corresponding calculations in case dctype == PSCR which is so far never set and
there is currently no UI for these calculations. As pO2 is SAC dependent it takes
a certain attempt at getting it and drops to defaults from the prefs otherwise.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is bigger and more invasive then I wanted, but it's hard to break it
down into smaller pieces. Here's what it does:
The former "Download" button becomes the "Download", "Cancel download" and
"Retry" button. So this button controls your interaction with the dive
computer.
The other two buttons are now purely "OK" and "Cancel" for the dialog.
"Cancel" discards what happened (much easier now that we download into a
different table), and "OK" adds the dives that were selected in our
selection UI (by default all downloaded dives) to the real dive_table.
And while redoing all this, I also redid some of the state machine
underlying the dialog. The biggest change that the user will see is that
partial downloads (after canceling or after an error) will still offer the
dives that were completely downloaded up to that point in the selection
menu.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems better than forcing a crash or accessing random data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We pass a different table to libdivecomputer (and the uemis code) and have
that table filled. And then we simply copy the dives from that table into
the real dive_table when the user accepts the download.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This still isn't actually used, just puts it in place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will allow us to download the dives from the dive computer into a
separate table just for that purpose and not into the main dive_table.
I really dislike the code that's in place that dates back to the very
earliest code written for Subsurface. Dumping the dives straight into the
main dive_table seems really stupid to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since we now track all clicks on the row, having the setData() actually
neutralized the action that we took on the clicked() signal.
Now you can select / deselect a dive, regardless where in the row you
click.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Yet another bug because the indices are inclusive. We need to start off
with the last being smaller than first and we need to adjust the row
count. It might be easier to just fix thing to make last be exclusive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This fixes the issue where there was no visual feedback when clicking on
the second or third column in the grid. It would actually change the
checked state of the checkmark internally (and you would see the new state
once you clicked on another dive), but it wouldn't give immediate visual
feedback.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The array we allocated was one entry too small.
On the flip side, let's just make sure we cannot call this with a negative
range. That would be bad, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We may reconsider this as this might replace the Retry function that's
currently completely broken.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Setting things up for zero dives will cause all kinds of weird corner
cases. Just don't do it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We report a bug if this is not unsupported and not successful. And then use
the result. Hello? So if this is not supported, we still use the result?
Oops. This has been around for a long time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Correct minor malfunction with CCR setpoint display. It was showing even
when the po2 display was turned off. This patch ensures that the setpoint
graph only shows when the po2 toolbar button is activated (and in addition
the appropriate checkbox in the Preferences).
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Previous code suggested a "upgrade" if your firmware where other than
whats parsed from the autofirmware call.
This switches that logic into only suggesting firmware upgrade if the
found firmware is newer than the firmware your device runs.
The previous logic was very annoying if you have a device running a
development version of the firmware. If you have taken that step of the
guided path, you shouldn't be told to "upgrade" to something older
every time you download from your computer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
QTextStream gets pulled in by QDebug, but this includes the right header
instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Back in e544796199eb ("Add missing divemaster field to the manual
import"), divemaster field got added without extending the array length.
This corrects that.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We already have provider in a local variable. The lookup and "model"
variable is redundant.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I don't like mixing setEnabled() and setDisabled()... let's just always
use setEnabled().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This isn't hooked up, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It seemed silly to only be allowed to click the tiny checkbox.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The checked array is zero based, reflecting the rows shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is horrible, but it gets something in place and hopefully we can
clean this up soon.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Math is hard.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is where we need to call accept()
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't get location data from the dive computer (at least not from
99.99% of the dive computers today). And we really need to show the data
in a human readable format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The whole point is that we then want to pick and choose which dives to add
to the divelist.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Joseph W. Joshua
Robert C. Helling
Willem Ferguson
Anton Lundin