| Age | Commit message (Collapse) | Author |
|---|
|
A complete batch of divelog and dive data takes about 20% of the available
space (depending on how long those dives are). This is a hack and I can
see this potentially going wrong, but the alternative is to be even more
conservative and that has its own set of problems as it causes us to need
more "unplug, wait, plug in again and restart" cycles.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This looks like a fairly big change but it mostly just moves a block of
code inside an earlier loop and adjust a few variables around it.
The completely broken and insane Uemis download protocol distributes data
across different "databases" on the dive computer. The "divelogs" are
downloaded in batches of 10 (most of the time), and with this change every
time one of those batches is downloaded we straight away get the matching
"dive" entries.
Hopefully this will avoid having the download abort (for lack of space)
before all components are loaded.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This caused us to not read the auxiliary information for up to the last
ten dives that were downloaded from the SDA.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Silly bug. A lot of things in cmake are case insensitive. Some care about
case. Stupid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the user hits retry from within the download dialog, the dive list
might still be empty but we still have to look for the best point to
restart.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we run out of space in the Uemis filesystem we return an error. The
user could reasonably unplug the SDA, insert it again and then retry to
continue the download (that's what we tell them to do). In that case we
need to make sure we start at the correct dive otherwise the same dives
keep getting downloaded over and over again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The dialog didn't accept "OK" and store the dives downloaded / selected so
far if there had been an error. Especially with partial downloads from the
Uemis SDA this is something that is quite reasonable to want to do, so
allow exiting the dialog with OK even after an error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We do a good job in the fixup_dive() code to make sure we don't add long
surface tails to the dives, so don't try too hard to guess the correct
last sample in the Uemis specific code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A well intentioned attempt in commit ff860b3c044a ("uemis-downloader -
resource leaks") to fix resource leaks actually introduced a bug.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- don't put anything on the first line after the opening "("
- fix indentation of the closing "("
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
e.g.
SET() -> set()
ELSEIF() -> elseif()
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
remoevs the extra white sapce in the generated
ssrf-version.h.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- indentation
- spaces near comments
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These two new options allow usage of pkg-config to retrieve
libdivecomputer and libgit2.
For some reason the variables *_LIBRARIES have to be set
to blank strings in the process, otherwise "-l" is passed to
the linker.
LIBGIT2_FROM_PKGCONFIG is a rename from PREFER_GIT_FROMSOURCE
for consistency. The IF() check is also fixed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If NO_MARBLE is set to ON, the MARBLE package is not seeked.
If set to OFF the package is seeked, but if the find fails
the gcc definition -DNO_MARBLE is set and marble is disabled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
NO_TESTS: disable the tests
NO_DOCS: disable the docs
Both are set to OFF by default.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simple omission in commit 7596db28b5ad ("cmake: allow looking for optional
libraries").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We shouldn't need this. Ubuntu is once again broken. What else is new.
But since this shouldn't hurt any of the sane Linux version, I'll just add
it for any Linux flavor.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some install name magic on two of the libraries we build was necessary for
things to work out correctly.
And I added an install step to the default build that puts Subsurface in the
install_root on other OSs and creates the Subsurface.app under
subsurface/build/Subsurface.app on the Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add the functionality to undo/redo removing of dives from trips. The
code calling remove_dive_from_trip has moved to the UndoCommands class.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is being taken care by Qt5::LinguistTool
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Planned dives must be replanned while manually added dives must be edited.
Show error messages to handle wrong user input.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There is no variable for it, but we can abuse the variable that shows us where
moc is located.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
CMake still confuses me. When testing if a variable was set it sometimes needs
to want "DEFINED", but sometimes I need to compare it to an empty string. Let's
do both (this seems to fix the problem I ran into) - but this is still weird.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And use this to look for libusb.
If it's there then libdivecomputer likely was linked against it. If it isn't
then we don't need it, either.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The cross building instructions for Windows are still lacking.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Working on making the different ways we build things more consistent
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems less confusing then calling it just "install".
Also adjust our cmake/Modules/Find... files accordingly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Since most regulators have an intermediate pressure of 10bar
the minimum value is 10 while the max is 99.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
By adding a new CMakeLists.txt file and configuring
the translations inside of it's folder, the buildsystem
will compile everything on that folder.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And remove the old code that did the same thing in
a very complex way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Currently we search for a static library and if we don't
find it, we search for a shared library. If one of them
is found, we return success but if none of them is found,
error. So - A static library for libgit and libdivecomputer
is preferred over the shared one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The MinGW based script is still there for reference, but that's no
longer how I build the Windows binaries.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Distribution builds on Linux tend to be made from tar files, not from git trees.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With this we also give up on building daily builds on Ubuntu 12.04
The cmake based infrastructure very much assumes Qt5 at this point.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The old one was
a) outdated and
b) didn't work with cmake so it was rather misleading to have here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It's been a LONG time since this was correct
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
- libgits version bump to 0.22 (0.21.5 didn't worked here)
- call cmake in build.sh instead of qmake.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
It currently searches for the .a (preferred) or the .so in the following
directories, in order: ${CMAKE_CURRENT_SOURCE_DIR}/../libgit2, /usr/local,
and /usr.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We will use the OPTIONS variable to decide to find the
.a or the .so, so there's no need to do checks here.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Lubomir I. Ivanov
Grace Karanja
Tomaz Canabrava
Gehad elrobey
Joakim Bygdell
Tomaz Canabrava