| Age | Commit message (Collapse) | Author |
|---|
|
This tries to detect the date format when initially reading a CSV file
for importing.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
After reserving only the required amount of data for stats_by_type, we
showed an extra DC type on the statistics (no more extra space filled
with 0 at the end of the buffer)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds the configure parameters for safety stops on the hwOS(OSTC3)
and OSTC computers.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Now with firmware 10.23, the settings behave as they should, and won't
hang the communication.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The index in the fixpopup function was incorrect which caused the user to
need TWO cursor down presses to move to the second element. I changed the
index value so the user now needs only one key press to traverse up/dowm.
Fixes #954
Signed-off-by: krishan Chopra <choprakrishan61@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Copying the entry pointer and assuming that it stays valid is of course totally
bogus. This is most likely the reason for the random crashes people have
observed.
See #992
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In commit 37c10c8fd6 ("Add dive type to statistics window") not enough
space is reserved for the newly introduced array if the dive list as fewer
than 4 entries.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds dive type based division to the "yearly statistics" window.
Thus people can see the stats from individually from OC, CCR, PSCR and
freedive.
See #949
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This hides the start time when viewing trip details.
See #964
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The date comes from the first dive in trip, thus no need to allow
editing (especially since the edited date seems to be discarded in any
case).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This will use the depth units from user preferences when exporting the
worldmap.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
automake is recommended by autoconf, but depending on the
configuration, the recommended packages might not be installed. Thus
it is better to have it explicitly listed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
As the group can be something else than dialout on some systems, mention
this on user manual.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The timedepthmode specifies the time in seconds when using si units,
otherwise minutes. This patch implements this support.
Fixes #981
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And enable it for builds.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This reverts commit d69c9e08af3c0c00807337dacab66a89075f2eab.
While this is a nice improvement, it requires other patches to work
correctly which go beyond what I'm comfortable having in a "quick update
to 4.5".
|
|
If we looking for dive details and are trying to guess the offset between
object_id and logfilenr, we need to treat logfilenr 0 as special - it
means we read past the end of the list of stored dives and need to walk
backwards.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Opening Subsurface for the first time with heartbeat graph visible
and then immediately doing File->New shows the logo/background in the
profile space while hiding everything except the heartbeat graph.
This patch makes sure that the graph is hidden with everything
else on an empty profile state.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some backends support giving tank data for some, but not all models that
they support (and simply report no tanks for those models that don't
support this). The Suunto Vyper is one of the dive computers where this
happens and without this change we report angry red warnings after a
perfectly correct download.
So this changes the logic to only show that error if there actually were
tanks reported.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Adding pictures to the repository was a big mistake on my part. It's very
easy for the git repositories to reach a gigabyte and more making sync
times (and especially "first download" times) completely unreasonable.
This doesn't solve the problem for existing repositories (as the pictures
are already there, in the git history), but at least it prevents us from
storing more pictures out there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Tank icons were shown at incorrect spots on the profile
when the DiveEventItem object held a pointer to a struct
event even after the struct event at that address had
been freed. When internalEvent is a pointer to freed
memory, internalEvent->time.seconds could have all kinds
of crazy values, which get used in member function
DiveEventItem::recalculatePos to place the tank at bad
x coordinates.
The DiveEventItem(s) no longer store a pointer to memory
that they do not own. This way, no matter how the path of
execution arrives into slot recalculatePos, we never need
fear that the DiveEventItem will dereference a garbage
pointer to a struct event.
Fixes #968
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
One user's debug log shows valid data, only not in the format we've seen
before (with the response starting with '{'). Instead he gets a repeat of
the second word in the response to processSync prepended to the expected
output. So let's skip the data until the first '{'.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Don't just clear out the buffer pointer, free the memory, first.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This way the ASCIIDOC works as expected and creates the numbered list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we already have an air temperature set, don't overwrite it with
potentially less accurate infromation from the first sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When typing in a partial location name, the match now considers the whole
text, not just the start of the text. So typing in "Yell" will match both
"Yellow House" and "Mellow Yellow".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The runtime html table is printed only if printing
a verbatim diveplan is disabled. So the closing tags
should be printed only in that case.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Once again focus on language and readability.
Signed-off-by: Wendie Fisher <wendie@divedad.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
There is a bug on OSX where free() is called on non-allocated
memory in free_prefs(). Most of the preferences are not freed
in free_prefs() while copy_string() is used on them, so let's
not free() any pointers in free_prefs() and leave them
as one-time leaks.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In add_plan_to_notes() the 'disclaimer' is set to the temporary
buffer 'buf'. By making 'buf' static, 'disclaimer' now points to a
persistent buffer.
Bug was reported as bad characters when printing the planner
deco text.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Wendie Fisher <wendie@divedad.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Otherwise if the user selects more than one dive, then goes back to just a
single dive, the maximum and minimum duration of the previous selected
group of dives stays visible which is clearly incorrect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Once again compile time enabled. I guess it would be nice to turn this
into a logfile (just like we have with the libdivecomputer backends).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I user had a Uemis that had a dive log entry for a certain internal id but
no dive info for it. This appeared to be one of those dreaded dives when
the Uemis decides to start a dive at the end of a flight and then stays in
dive mode until it runs out of battery.
Anyway, if we see a number above and a number below, just give up and move
on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If every dive in a download block from the Uemis was deleted we kept
downloading that same block of dives. With this we remember how far we got
even if the dives ended up being deleted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These are mostly a convenience for me, they'd obviously have to be updated for
someone else trying to use them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
On the Mac the info on the download dialog isn't shown. So print it on
stderr as well when in verbose mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Subsurface-mobile doesn't have a window title with the name of our file
name at this point, so simply don't try to trigger the update.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Small changes to the language to make it easier to read.
Signed-off-by: Wendie Fisher <wendie@divedad.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add a new dialog/page which is shown right before
the final "uninstall" click.
The dialog may contains two checkboxes - for registry
entries and for the user path. These checkboxes will not be
created if the user has not run the application yet,
as no registry keys will be available.
Selecting the user directory checkbox shows a warning message box,
that the user should make sure no important files are present there.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
According to the specification each proper sample should have depth, so
we can just ignore the empty waypoints.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
'default_filename' is obtained from system_default_filename()
but system_default_filename() returns a static pointer
the HEAP memory of which is handled in main().
Remove the free() for 'default_filename' free_prefs()
to prevent a double free().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Miika Turkia
Anton Lundin
krisalpha
Dirk Hohndel
Lubomir I. Ivanov
K. \"pestophagous\" Heller
Robert C. Helling
Wendie Fisher