summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2015-05-11Only show expand all and collapse all options if there`s a needGravatar Tomaz Canabrava
This patch unclutter the menu by hidding collapse all when all dives are collapsed, and expand all when all dives are expanded. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-10Get the location information in a separate threadGravatar Tomaz Canabrava
This makes Subsurface usable faster for those without a good internet connection when they are opening an older data file. While parsing, we are only feeding an vector of locations, after the parsing is done, we traverse the vector searching for the information on the web. I need to also add a way to stop if there`s no internet connection - but this will be another patch. Also, fixed two small memory leaks from the old imp. [Dirk Hohndel: cleaned up the whitespace mess] Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-09Keep old notes when saving as new dive in replanGravatar Robert C. Helling
... but discard an old disclaimer and runtime table if present. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-09Change menu entry for "replan"Gravatar Robert C. Helling
Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-08Only print gasname for a segment in planner if it differs from the previous oneGravatar Robert C. Helling
This is to avoid visual clutter when replanning logged dives. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-08Only warn when trying to replan a logged diveGravatar Robert C. Helling
If there are more than 100 samples, average some of them so we end up with no more than 100. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-07Ignore the gas_change alarm on MacDive importGravatar Miika Turkia
As the gas changes can be parsed more reliably from the gases list, we just ignore the gas_change events as redundant information. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-07Parse MacDive gas usage from gases listGravatar Miika Turkia
Gas change events can be parsed properly from the gases list with clear information on what the gas mixture was. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-07Use function from commonTemplates on MacDive importGravatar Miika Turkia
Get rid of duplicate function. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-07Import tags from MacDiveGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-07Parse the MacDive gaschange valuesGravatar Miika Turkia
Fixes #869 Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-07Fix event name for MacDive gas changesGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Add new fields as extra data on MacDive importv4.4.2Gravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Add entryType as tag on MacDive importGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Have computer data inside divecomputer tagGravatar Miika Turkia
This includes all the data computer related data within the divecomputer tag. All the extra noise is just indentation (apart from moving the divecomputer end tag). Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Re-order the MacDive importGravatar Miika Turkia
Next commit will do indentation so this one will keep it clear of what actually occurs. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Support for new data format for MacDiveGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Add new fields as extra data on MacDive importGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Add entryType as tag on MacDive importGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Have computer data inside divecomputer tagGravatar Miika Turkia
This includes all the data computer related data within the divecomputer tag. All the extra noise is just indentation (apart from moving the divecomputer end tag). Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Re-order the MacDive importGravatar Miika Turkia
Next commit will do indentation so this one will keep it clear of what actually occurs. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Support for new data format for MacDiveGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Latest translationsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-04Final version number changesGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Update ReleaseNotesGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Use dynamic sample interval on divelogs.de exportGravatar Miika Turkia
Rounding always up should give us sensible sample interval as EON Steel adds extra samples. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Have the dive duration in variable for further useGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Select only "meaningful" samples for divelogs.de exportGravatar Miika Turkia
The logic to select samples from EON Steel for divelogs.de export is the following: - Ignore sample at time zero, as that is surface, and the second "odd" sample contains information we are interested in - Grab the second sample, first sample with pressure and temperature readings - Grab the third sample - "grand parent" is 0, thus our first interval sample - Grab the samples when the predecessor (or grand parent) is at least 10 seconds away This logic seems to produce reasonable results when exporting EON Steel logs to divelogs.de. Naturally there might be corner cases, that are not taken into account, but this basic logic seems reasonable in normal cases. (Unfortunately analysis is done based on a single dive.) Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Use variable to track special handling of DCsGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Set EON Steel sample interval to 10s onGravatar Miika Turkia
This sets the Suunto EON Steel sample interval to 10 seconds when exporting to divelogs.de. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Improve multi dive tag list editsGravatar Dirk Hohndel
The old behavior was kind of crude. Just smack the tags that were on the displayed dive on all selected dives. This seems to make more sense. We figure out which tags were added to the displayed dive and add them to all selected dives. And we remove all tags that were removed from the displayed dive from all selected dives. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Tag list handling: add two new helpersGravatar Dirk Hohndel
taglist_added() simply figures out the tags that are in the new list but not in the original list. taglist_dump() makes debugging things easier. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Improve multi dive tag list editsGravatar Dirk Hohndel
The old behavior was kind of crude. Just smack the tags that were on the displayed dive on all selected dives. This seems to make more sense. We figure out which tags were added to the displayed dive and add them to all selected dives. And we remove all tags that were removed from the displayed dive from all selected dives. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Tag list handling: add two new helpersGravatar Dirk Hohndel
taglist_added() simply figures out the tags that are in the new list but not in the original list. taglist_dump() makes debugging things easier. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02User manual updateGravatar willem ferguson
This adds text to the following sections: 1) Dive planner (Open circuit planning) 2) Dive Planner (Recreational OC planning) 3) Use of hashes to move images between directories 4) Undo/Redo feature of dive list manipulations One image in planner text is modified. Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02User manual update: OSTC Tools integrationGravatar willem ferguson
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Use dynamic sample interval on divelogs.de exportGravatar Miika Turkia
Rounding always up should give us sensible sample interval as EON Steel adds extra samples. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-02Have the dive duration in variable for further useGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-05-01cmake: enable Facebook supportGravatar Dirk Hohndel
Not sure if we have this on Android, so right now I just enable it for Linux, OS X, and Windows. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Select only "meaningful" samples for divelogs.de exportGravatar Miika Turkia
The logic to select samples from EON Steel for divelogs.de export is the following: - Ignore sample at time zero, as that is surface, and the second "odd" sample contains information we are interested in - Grab the second sample, first sample with pressure and temperature readings - Grab the third sample - "grand parent" is 0, thus our first interval sample - Grab the samples when the predecessor (or grand parent) is at least 10 seconds away This logic seems to produce reasonable results when exporting EON Steel logs to divelogs.de. Naturally there might be corner cases, that are not taken into account, but this basic logic seems reasonable in normal cases. (Unfortunately analysis is done based on a single dive.) Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Use variable to track special handling of DCsGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Set EON Steel sample interval to 10s onGravatar Miika Turkia
This sets the Suunto EON Steel sample interval to 10 seconds when exporting to divelogs.de. Signed-off-by: Miika Turkia <miika.turkia@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Uemis downloader: clean up the path for Windows mount pointGravatar Dirk Hohndel
Oops, we left the (UEMISSDA) in the path. This can never have worked without the user manually correcting it to just show the drive letter. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Uemis downloader: better error reportingGravatar Dirk Hohndel
Tell the user if Subsurface can't write to the req.txt file. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Mention the issue with the Eon Steel on MacOSGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Fix build problemGravatar Dirk Hohndel
I don't quite understand why these functions were removed for Qt5.4, but this causes the build to break with Qt5.4. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Uemis downloader: don't use bogus sensor data from UemisGravatar Dirk Hohndel
Sometimes we get a sensor number of 255 - which gets turned into a tank index and then causes all kinds of havoc. Simply refuse to use a tank number larger than the maximum Subsurface has been compiled for. Oh, and use consistent variables to handle these unsigned 8 bit integers. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Uemis downloader: adjust the threshold for stopping downloadsGravatar Dirk Hohndel
A complete batch of divelog and dive data takes about 20% of the available space (depending on how long those dives are). This is a hack and I can see this potentially going wrong, but the alternative is to be even more conservative and that has its own set of problems as it causes us to need more "unplug, wait, plug in again and restart" cycles. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Uemis downloader: download additional dive data after every batchGravatar Dirk Hohndel
This looks like a fairly big change but it mostly just moves a block of code inside an earlier loop and adjust a few variables around it. The completely broken and insane Uemis download protocol distributes data across different "databases" on the dive computer. The "divelogs" are downloaded in batches of 10 (most of the time), and with this change every time one of those batches is downloaded we straight away get the matching "dive" entries. Hopefully this will avoid having the download abort (for lack of space) before all components are loaded. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-04-30Uemis downloader: get the right values set before bailingGravatar Dirk Hohndel
This caused us to not read the auxiliary information for up to the last ten dives that were downloaded from the SDA. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.52.0) at 2026-01-14 12:03:26 +0000