| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Assume your V2 file contains two locations with different name but
identical GPS location. "Blue Corner" and "Blue Corner, Palau". And you
have many dives there.
When reading a V2 file the GPS is read first and a dive site is looked up
based on that. Let's assume the lookup by gps finds "Blue Corner, Palau".
Now every time we get the "Blue Corner" site in the V2 file we look up
the GPS, get "Blue Corner, Palau" as dive site, then read the name "Blue
Corner" and say "oops, different site" and create a new one. Resulting in
several dive sites named "Blue Corner" with identical GPS but different
UUID (as we add the dive time into the SHA for the deterministic UUID).
With this commit, if we have a dive site that matches the GPS but has a
different name, we check if we happen to have an exact match for the dive
site information from the XML file (and use it, if we have it) before
creating a new dive site.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Fixing this error makes TestPlan pass again.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The UI detects when it should refresh the loction after the
user finished editting a divesite. Creating and editting
divesites is now working even when the current dive is not
saved yet.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We should compare the calculated runtime against the runtime previously
calculated by Subsurface, expecting them to match exactly, in order to detect if
a change has been made. We still compare against a benchmark, allowing some
difference.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We now do the first_ceiling_pressure calculation at the start of the CVA loop.
We don't need to do it before.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We should run clear_deco as early as we can. We should calculate the nuclear
regeneration and start gradient after calculating tissue tolerance. We don't
need to redo nuclear regeration and start gradient after that.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
By calculating crushing pressure after the manually entered phase, we were doing
it wrong for multi-level dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Inspired gas loading equations depend on the partial pressure of inert gas in
the alveolar.
P_alv = (P_amb - P_H2O + (1 - Rq) / Rq * P_CO2) * f
where:
P_alv alveolar partial pressure of inert gas
P_amb ambient pressure
P_H2O water vapour partial pressure = ~0.0627 bar
P_CO2 carbon dioxide partial pressure = ~0.0534 bar
Rq respiratory quotient (O2 consumption / CO2 production)
f fraction of inert gas
In our calculations, we simplify this to use an effective water vapour pressure
WV = P_H20 - (1 - Rq) / Rq * P_CO2
Buhlmann ignored the contribution of CO2 (i.e. Rq = 1.0), whereas Schreiner
adopted Rq = 0.8.
WV_Buhlmann = PP_H2O = 0.0627 bar
WV_Schreiner = 0.0627 - (1 - 0.8) / Rq * 0.0534 = 0.0493 bar
Buhlmann calculations use the Buhlmann value, VPM-B calculations use the
Schreiner value.
Concept explained here:
http://www.divetable.de/workshop/V1_e.htm
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
In other implementations of VPM-B, surface_tension_gamma and
skin_compression_gammaC are taken as 0.0179 N/msw and 0.257 N/msw respectively.
We do pressure calculations in bar, not msw, so our gamma values need to reflect
that. Previously we had used 0.179 and 2.57, which are close but not quite
correct (10 msw == 1.01325 bar).
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is useful for determining why we calculate a difference profile
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Update the tooltip and enable only when there is a divesite selected
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Use clicked instead of activated signal on the completerList to
handle the selection of a divesite.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A divesite uuid is created using the timestamp of the currently
selected dive. When there is no current_dive, use the current
time to create a uuid.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While I cannot explain for the life of me why this worked on Linux and
Windows and not on Mac, what I have now seems to work on all three
platforms.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And add a small message that two potential ERRORS that are thrown in the
deploy step are actually harmless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A git pull seems to cause things to go wrong. Just fetching the repository
and checking out the version that we want seems to work better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If localDevice isn't valid we never initialize the discory agent, so
let's not dereference it in the destructor unless it is valid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These were left unused by cleaning up the import function parameters.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Continuing the crusade against excessive number of parameters for some
functions. This should be the last of the import functions to be cleaned
up.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The pressure for the Boyle compensation is of the first ceiling,
i.e. the ceiling seen from the bottom rather than the first
stop.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
They now reference the Subsurface-branch branches of Marble and
libdivecomputer and v0.23.1 of libgit2.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
At least on Ubuntu with xfce instead of Unity this appears to be necessary
to get a menu bar for the application.
Fixes #833
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Copying Dirk's answer to our user forum to FAQ.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When, in a dive edit mode user entered a dive site
and went to dive site edit mode then finished the ds
edit, the app would lose the disabled property of the
dive list, making it possible to select a new dive
when we where editing another one, complete mess.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the user clicks on the first or second option of the drop
down list, subsurface will move him to the dive site edit panel
automatically, since it's a new dive site and there's no information
about it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When we are in display dive mode, and then edit the
location text edit, going to edit dive mode, the location
text edit will be moved a bit below of it's original position
but the Dive Site List would be already opened, and stuck
on it's original position, covering the dive list.
This patch fixes that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Moved the get taxonomy button from the maintab to the edit dive site
widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The get taxonomy button will be inside the manage dive site interface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I didn't have time to create / finish the photos widget, so
I'm adding back the profile view while in dive site edit mode,
but disabling it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
|
|
Otherwise some artefacts of the last dive / dive site that where shown can
remain visible even after the dive data was closed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Right now this is quite ugly. And at least in my VM the transparency
doesn't seem to work correctly. But at least we now have some visual
indication that we are doing something while opening or saving cloud
storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This removes the excessive amount of parameters on manual CSV import. We
just use appropriate string array than can be directly fed to XSLT
parsing.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Add more VPM-B planner tests. The "expected" total run time is taken as the
total run time produced by the Fortran VPM-B program. For all these tests, the
results are within two minutes, which is a good result, but most are classified
as a "fail".
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds a test for 100 m for 60 min dive on trimix using VPM-B
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Adding Linus' instructions for udev rule to our FAQ. Product ID 0031
that is used for firmware updates is not included here, as it is
probably not commonly needed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Delete a dive while offline, modify it from a different system while
online. Then resync.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Rick Walsh
Sander Kleijwegt
Miika Turkia
Robert C. Helling
Sander Kleijwegt
Tomaz Canabrava