| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit e70bbb637e1d
Linus' solution in commit 27c36ec4cf41 ("Improved handling of git syntax
names with no git repository") is much better and makes my hack
unnecessary.
|
|
This makes "is_git_repository()" return non-NULL for all file names that
match the git name pattern, even if we don't find an actual git
repository there. That way, we won't fall back to writing out an XML
file with an odd filename.
If there is no actual git repository, we return a special invalid dummy
pointer, and then the git reading and writing routines will catch it and
return the appropriate error.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Before this change when the user gave a git style filename, say
/tmp/mydives[myname], if Subsurface couldn't create a repository with that
branch, it instead saved an XML file to this exact name, with '[' and ']'.
That clearly is not the desired behavior, so report an error instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This definitely seems to be a good candidate for a modal dialog.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The last figures in the manual using the Unity desktop have been replaced
with equivalent figures using Gnome 3. There should now be no figures
remaining from Unity.
This is a revision of the profile part of the manual in the light of the
changes for V4.1. Text has been moved around, some new text added or
rewritten. Graphics has been replaced to reflect the UI for V4.1,
including Tomaz's button bar and Louisa's new buttons for that bar.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes the error string just be an internal "membuffer", which the
GUI can fetch and show when errors occur. The error string keeps
accumulating until somebody retrieves it with "get_error_string()".
This should make any write errors actually show up to the user.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This at least avoids marking the dive list as unchanged on a failed
write, and propagates the error further up the stack.
We still don't show the error string in the GUI, though. I'll start
doing that next, I think.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Note! This just returns the error (and uses "report_error()" to generate
a string that is currently printed to stderr). Nothing actually *uses*
that error return yet, and we don't show the error string in the GUI.
Baby steps.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Commit 13e2210d75bb ("Allow remote branch names when reading a git
object tree") made it possible to read (but not write) remote branches,
which is very convenient when you just want to look at somebody elses
dives in a shared repository.
However, it was really quite stupidly done - both overly complicated,
and overly restrictive.
It's much better and simpler to just allow general git revision
specifications, which includes branches (both remote and local) as a
simple case, but also allows general git revision expressions. So you
can tag things, and use a tag-name instead. Or you can say that you
want to look at the previous save, by using the "branchname^" syntax.
Or, you can use the git reflog, and do things like
subsurface ~/scuba/[linus@{two.days.ago}]
to see the dives that your repository contained two days ago.
Obviously, you will not be able to save to this kind of ref-spec (and I
really will have to make error handling work better), but for browsing
state it's quite useful.
And in git terms, this is actually simpler than the "lets try to first
see if we have a local branch of that name, and then if we have a remote
one", as shown by the fact that this removes more lines than it adds.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes subsurface remember the git source commit of the dive data.
If you save to an existing branch, subsurface will now complain and
refuse to save if you try to save if the existing branch is not related
to the original source. That would destroy the history of the dive
data, which in turn would make it impossible to do sane merging of the
data.
If you save to a new branch, it will see if the previous parent commit
is known in the repository you are saving to, and will save parenthood
information if so. Otherwise it will save it as a new parentless commit
("root commit" in git parlance).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
These are contributed to Subsurface under GPL.
Signed-off-by: Luisa Pires <luisapiresdesign@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
By simply storing the coordinates based on the scene (instead of trying to
map them to real coordinates) the overlay position is correctly restored.
Also remove the redundant positioning before readPos is called.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is the quick hack to read from a remote branch, which allows you to
look at other peoples branches when sharing a git tree.
Note that the "remote" part of "remote branch" is the _git_ meaning of a
remote branch: it is the local cached copy from a remote. This does not
imply any kind of network traffic - but if you have done a "git fetch"
to get branches from some other source, you can now use the remote
branch-name to see them in subsurface.
Also notice that you should *NOT* save the end result. It will "work",
but it won't do what you think it does. Saving does not update the
remote branch, it would create a new *local* branch with that same
branch-name, and since it's a new branch, it would do so with no
parenthood information. So you'll be very very confused.
I think I'll add code to remember the parent when loading from a git
repository, and then use that remembered information when saving. So
then you could create a real local branch with real history. But that's
an independent issue from this loading case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Instead, just encode the git repository information in the filename.
We want to make it much harder to make it match a real filename, but to
still allow easy browsing with the file manager interface. So the git
repository "filename" format is the path to the git repository
directory, with the branch name encoded as "[branch]" at the end rather
than the "path:branch" format that we used in the descriptor file.
[ For example, on Windows, a filename like "c:\my.xml" could be
interpreted as the branchame "\my.xml" in the repository in the
directory "c" ]
In particular, with this model, no filename that ends with ".xml" could
possibly ever be considered a git repository name, since the last
character of a git pathname is always ']'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is a bit tricky because we are using a plain widget for
a window and don't have a class for it (req. more source files).
Also for the table model to update we need to create a new
YearlyStatisticsModel instance each time. At least, in that regard
we can re-create the model each time refreshDisplay() is called.
This patch adds a couple of private variables that are used
to manage the memory of the yearly statistics model and window
and also close that same window on MainWindow::closeEvent().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The topmost Z order of items in the profile should be:
- background (poster / logo)
- toolTipItem
- rulerItem
...
This mostly fixes the ruler being under other elements.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
A couple of problems with the ruler:
- the rotated text doesn't look very well at all and interpolation doesn't
help it much
- measuring towards the right most part of the profile makes the text go
out of the screen
To solve these issues and attempt to improve the ruler this patch does the
following:
- place the text at the bottom of the lowest of the start and end points.
this way the line will never intersect with the text
- clamp the x position, so that the text doesn't ever leave the screen
horizontally
- place a white background behind the text so that it will cover text and
graphics under the ruler item
(TODO: place the ruler on top of everything else)
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Only the change to subsurface.pro is authored by me.
The rest is generated (subsurface_source.ts) or created by the translators
on Transifex.
This adds Greek, Hungarian (partial), Latvian (partial), Romanian, and
Turkish (partial) translations.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
For most dialogs it would be much safer to make them Qt::WindowModal to
the parent (MainWindow).
For now we are not doing this for the preferences dialog as there are
situations where the user might want to be able to move it around and even
interact with the main window.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the newly created save tree is identical to the parent commit tree,
don't bother creating a new commit. We are already fully up-to-date.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
I didn't think that one through: the version string is already saved in
the commit message, and so saving it in the tree object is redundant.
Now a little redundancy doesn't hurt, but having the tree object depend
on th esubsurface version _does_ end up being annoying: it means that as
you update the subsurface version, doing a data save will result in a
different tree SHA1 even if none of the data changed.
Which doesn't actually matter right now, since we always create a new
commit anyway, but my plan was to skip the commit creation if nothing
changed in the tree. And saving the version string defeats that if you
are a subsurface developer and the subsurface version keeps changing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We don't actually much use the trip list any more, and it's possible we
should simply get rid of it. I hadn't added the trips to the trip list
when loading them, and everything worked fine.
Well, *almost* everything worked fine.
There is one use of the list of trips, and that's the "clear the trip
index for each trip before saving them". That literally seems to be the
only non-debug use of this list, but when we didn't add the trips to the
list, the trip index never got cleared before saving trips.
And even that is unnoticeable for the *first* save event, because the
trip index will have been clear before that.
But on the *second* save event, if the trip index doesn't get cleared
before saving, the saving code will look at the index, say "Hey, I
already saved this" and skip the trip.
So if you loaded the trips from a git repository, and then saved things,
everything worked fine. But it you saved things a *second* time,
nothing would get saved at all, because all the trips were marked as
saved already.
Anyway, I think the real solution is to get rid of the pointless trip
list, and just use "for_each_dive()" to find all the trips, since that
list clearly is just more pain than gain. But in the meantime, this
makes the git loading add the trips properly to the list.
Signed-off-by: Linus "oops" Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The animation appeared when the user started subsurface with a default
file, wich was a little annoying since it didn't had a 'from' position
to go and it was also increasing it's size on some window managers
that do subtle windows animations when a program starts. This patch
treats the first dive opened when the program loads with a divelog pa
rameter differently as the following ones storing the velocity value
on a temporary, and reassigning it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The mainwindow->show(); was being called before we parsed
the dives, so in the case of a large dive file, we got a
very quick, but spottable, gray background on the profile.
The mainwindow->show(); now is called just before the
Qt main-loop starts.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
User can now fine-tune the animation speed on the preferences,
a value of zero disables it completely.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is very userfull for a ( yet to be implemented )
preference dialog about the animation speed, so the
user can enable / disable the animations or make it a bit
faster for it's taste.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Once the poster is displayed when there are no dives in the list,
we may also want to disable the QToolButtons (PO2, SAC, etc..),
until a new dive is loaded and the profile is redrawn.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is useful if we have more non-modal windows and we want
them simply to close with the main one without explicitly
creating class member variables to point to such instances.
A practical example would be the debug window created in
ProfileWidget2() (diveDepthTableView) which holds
the depth profile values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Currently when user wants to add a new dive information,
the ways to know what unit system is being used are
- Through preferences panel.
- Save the dive information, which displays units in
the text field.
This patch provides an option to the user to show current
unit system by displaying the unit on the side of the label
when the user is editing the fields.
This feature can be enabled or disabled by using the new
checkbox option i.e. `Show units in text labels` included
in `preferences->units` section.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
So this is totally unrelated to the git repository format, except for
the fact that I noticed it while writing the git saving code.
The subsurface divetag list handling is being stupid, and has a
initial dummy entry at the head of the list for no good reason.
I say "no good reason", because there *is* a reason for it: it allows
code to avoid the special case of empty list and adding entries to
before the first entry etc etc. But that reason is a really *bad*
reason, because it's valid only because people don't understand basic
list manipulation and pointers to pointers.
So get rid of the dummy element, and do things right instead - by
passing a *pointer* to the list, instead of the list. And then when
traversing the list and looking for a place to insert things, don't go
to the next entry - just update the "pointer to pointer" to point to
the address of the next entry. Each entry in a C linked list is no
different than the list itself, so you can use the pointer to the
pointer to the next entry as a pointer to the list.
This is a pet peeve of mine. The real beauty of pointers can never be
understood unless you understand the indirection they allow. People
who grew up with Pascal and were corrupted by that mindset are
mentally stunted. Niklaus Wirth has a lot to answer for!
But never fear. You too can overcome that mental limitation, it just
needs some brain exercise. Reading this patch may help. In particular,
contemplate the new "taglist_add_divetag()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
With the current suggested settings in `CodingStyle` content
of class blocks gets indented. To avoid this, value `g0` is
added to cinoptions. In addition to this `TODO` thing, few
additional options are suggested.
- Included the value `(0` to cinoptions, to comply with the
discontinuation of continuous lines as per Subsurface
coding style recommendations.
Add two options that aren't exactly about coding style but about
convenience:
- `hls` option to highlight all search options.
- `is` option to do incremental search
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the user has zoomed in but then changes to a new dive,
we may want to reset the scale back to the original value (1.0)
based on the current zoomLevel, so that the profile is not stuck
in zoomed mode.
This patch adds a snippet that resets the QGraphicsView scale,
zoomLevel variable and also the toolTip position.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This patch adds a new image resource named poster.png which,
is shown instead of the 3 posters. The main reason for that
is due to the poster text not being visible. This new image
is pretty much the Subsurface logo only.
It also removes the grid lines, while the poster is visible.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Such can be disabled with -Wno-reorder and are clearly
more of a nuisance, but C++98 12.6.2.5 says the order should be
the same as in the class declaration.
On theory this would only speed the compile times a tiny amount.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
s could be used without being set.
Also convert the file to utf-8 - for some reason it was created as
iso8859.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While 100 was almost certainly long enough for all the non-string data
that we'd find on a single line, it was a little too close for comfort.
So let's go total overkill and not worry about it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Simple oversight on the reading side.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was the final piece we didn't read. I can now read my XML file,
write it to a git repository, read it back, and write it to a new XML
file, and the final XML file is bit-for-bit identical with the original
one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes us parse everything we save, and I can load my XML file, save
it as a git file, load that git file, save it as a new XML file, and the
end result is identical.
Well... *ALMOST* identical. We currently don't save the dive computer
nickname and serial/firmware information in the git repository, so that
does get lost in translation. But all the actual dive data is there.
NOTE! I have currently only worked with my own dive files. They are
reasonably complex and complete, and do have a lot of the interesting
cases covered (like multiple dive computers etc), but there's no CCR
information, and all the dives are in trips, so this does need more
testing. It's at the very least very close.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes the sample parsing helper function for key-value pair parsing
more generic, and uses it for parsing cylinders and weightsystems too.
Events still to go, and then we have the "setting" section (for dive
computer nicknames and firmware information) that we don't actually save
yet in the git format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This gets us the stopdepth, cns, bearing etc information. We're getting
really close to parsing everything, but are still missing event parsing,
and cylinder/weight data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This doesn't yet parse the (less common) "key=value" type sample data,
so it's not complete, but the framework for that is in place too.
With this, we now parse all the basics, and the most noticeable missing
part is the cylinder and weigthsystem data. Lack of cylinder data in
particular means that SAC-rates etc don't get calculated, but other than
that it looks almost complete - you don't miss the missing event and
sample details unless you look for them.
I'll get the missing pieces done too, but this basic sample parsing was
visually a big step.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Some things are still missing: samples and events, and cylinder and
weightsystem information. But most of the basics are there (although
the lack of sample data makes a big visual impact)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This implements the simple line parser (including the multiline strings
with escape characters). What a difference a good file format makes:
this is nothing like the pain that is XML.
That said, it only does the line/string parsing right now, it doesn't
actually then look at what the lines say. So no human-noticeable
improvements in the actual data shown by subsurface.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If we want to scale to thousands of dives, we'll eventually want to read
the dive computer files lazily when actually needed, but for now we do
everything synchronously. Even if that may actually be slower than
parsing one big XML file.
The git object store is pretty efficient, but especially with some
history, the compression and delta application will certainly not be
free.
This does all the git object unpacking, but none of the actual data
parsing yet. But as part of looking up the file objects, we do get the
dive number (which is in the name of the dive file).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The biggest part of this commit is the comment about the woeful state of
the "git_tree_walk()" interface - the interface is not really very good
for seeing any recursive state, since it just walks the tree pretty much
linearly.
But the only real recursive state we care about is the trip, and in all
normal situations the "trip this dive is in" is the same thing as "what
was the last trip directory we traversed", so a linear walk works fine.
The one exception is if a dive isn't in a trip at all, in which case
"last trip directory" obviously isn't what we want.
But rather than do our own tree walking by hand (and just passing the
trip information in the natural recursive manner when traversing the
tree), we hack around it by just looking at the path to the dive.
That one-liner trivial hack has now generated about 20 lines of
explanation of it.
ANYWAY. With this, we parse the dive and trip hierarchy properly, and
instead of just printing out the data, we might as well insert the dives
and trips into the subsurface data structures.
Note: the only data we have about the dive and trip right now is what is
visible in the directory structure, since we don't look at the actual
dive file at all (not even the name of it, which contains the dive
number). So the end result will be just a sea of empty dives and the
trips they are contained in. The dives have a date and time, and the
trip has a date, though.
So this is *not* useful for actually saving and loading data, but the
data we do load is easily visualized inside subsurface, so as I'm
starting to add real dive data parsing code, it will all be much more
visually satisfying.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This adds a top-level "00-Subsurface" file that sorts first in the git
tree, and contains version information, dive computer nicknames and
settings. Although right now the settings are just the autogroup thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Linus Torvalds
Willem Ferguson
Luisa Pires
Miika Turkia
Lubomir I. Ivanov
Tomaz Canabrava
Lakshman