summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2017-10-16Connect finished signal of download thread only onceGravatar bs
Connect finished signal of download thread only once in constructor of DownloadFromDCWidget instead of every time the Download / Cancel / Retry button is clicked. Fixes minor nuisance: On repeated download attempts multiple massage boxes were shown. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2017-10-16Tidy up code in planner.c - create_dive_from_plan()Gravatar Stefan Fuchs
Tidy up the code which creates the first sample for time = 0 to make clear that the info for this does NOT come from the first planner point (dp). No functional change. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Fix dump_plan debug codeGravatar Stefan Fuchs
This fixes some debug code to dump the diveplan which is usually not compiled and used. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Planner creating dive from plan: No pressure for 1st sample with new gasGravatar Stefan Fuchs
In the planner when a dive is created from the diveplan every first sample with a new gas shouldn't have a pressure value added. Otherwise the interpolation code for the pressure graph in the profile will draw the pressure graph incorrectly. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Correctly name member function gasChange of DivePlannerPointsModelGravatar Stefan Fuchs
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16In planner prefer best_first_ascend_cylinder for gas breaksGravatar Stefan Fuchs
Up to now the cylinder for gas breaks was hardcoded to first cylinder. With this change the best_first_ascend_cylinder is used if its O2 is <=32%. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Don't confuse cyl with same gasmix with best_first_ascend_gasGravatar Stefan Fuchs
When calculating the dive plan in the planner don't accidently use another gas with same gasmix instead of the gas stored as "best_first_ascend_gas". This is important if you have e.g. a bottom stage and back gas with same gas mix because then you always want to start your ascent with the gas you used in last entered dive planner point. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Planner: Autom. move first datapoint gas to first gaslist positionGravatar Stefan Fuchs
In the planner it is best practise to start the dive with the first gas in the gaslist. Otherwise one would get a gaschange event at the very beginning of a dive. This change implements the following feature: Automatically move a gas to position 0 in the gaslist if the user selects this gas for the first dive data point. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Update diveplannerpoints cylinderidx when deleting a cylinderGravatar Stefan Fuchs
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16In dive.c make cylinder_renumber an external function...Gravatar Stefan Fuchs
instead of dc_cylinder_renumber() because it is the one which is really useful elsewhere. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Used gas in dive planner points: Support for multiple cyl with same gasGravatar Stefan Fuchs
In the planner if one adds two or more cylinders with the same gasmix (e.g. back gas and bottom stage 18/45) the drop down and data in the used gas column of the planner points table will be filled with a more verbose string mentioning also the cyl number and the cyl type description. Makes it easier in such a case to select the right cylinder. Introduces also a helper function which tells you if there is another cylinder with the same gasmix as the provided cylinder. This also has an option if it should consider unused cylinders or not. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Removing cylinders in planner: Be more restrictiveGravatar Stefan Fuchs
Be even more restrictive regarding which cylinders can be removed from the cylinder table in the planner. Only if a cyliner is not used in the planned part of the dive it can be removed. It doesn't matter if there is another cylinder with same gasmix. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Update Ubuntu/Debian packagingGravatar Dirk Hohndel
Part of this is based on code from Miika Turkia. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-16In location information UI set reverse geo lookup button activ...Gravatar Stefan Fuchs
as soon as coordinates are available . Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Reverse geo lookup string for http://api.geonames.org correctedGravatar Stefan Fuchs
Language selection should now work again with string "lang=xx". Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-16Documentation: Merge and update french translationsGravatar Guillaume GARDET
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-16Fix stupid syntax errorsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-15Make Travis test BT_SUPPORT off builds as wellGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-15build.sh: add option for force BT support offGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-15Make sure we can still build without BT_SUPPORTGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-15Update known-good Kirigami SHAGravatar Dirk Hohndel
This way we get the kirigami.pri fix for the iOS build. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-15Android should support the Cobalt dive compoutersGravatar Dirk Hohndel
With an OTA adapter - sadly I can't test that. This driver opens a specific USB device and will ignore the connection settings. It would be better to get some visual feedback for that (in the QML UI), but I'll leave that until this has been verified to work. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-15qml-icons: add a third, grayed-out map markerGravatar Lubomir I. Ivanov
It can be difficult to distinguish the new marker which is added on the map and has to be dragged when editing a new dive location. By adding a new grayed-out marker it becomes possible to gray out all other markers, while the current marker which is being edited is still bright red. Suggested-by: Dietrich Meyer <dietrich@sunnynames.com> Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-10-15qml-icons: make mapwidget-marker.png even darkerGravatar Lubomir I. Ivanov
This is done so that a de-selected marker is better distinguished from the selected marker. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-10-15mapwidget.qml: fix weird MouseArea bug in MapItemViewGravatar Lubomir I. Ivanov
The QML map uses MapItemView. MapItemView needs a delagate in the form of a MapQuickItem. The MapQuickItem needs a 'sourceItem' which would be used as the visual (e.g. marker) on the map. If the root sourceItem is of type Item, the marker becomes non-clickable. If the root sourceItem is an Image, the clicks work. This patch removes the root Item, which makes the code less organized, but at the same time it fixes the bug. Bug reproduced on the following Qt versions on Ubuntu: 5.5.x, 5.7.x Bug cannot be reproduced on Qt 5.9.x on Windows. Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-10-15Update translation source stringsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-14iOS build: update dummy.qml to match all the importsGravatar Dirk Hohndel
I don't think we need all the versions, but it shouldn't hurt. Now they are alphabetical, that should make it easier. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-14BLE: try to enable on iOSGravatar Dirk Hohndel
We can't use the localBtDevice on iOS, so hack around that and go straight to discovery. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-14iOS build: add include path for KirigamiGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-14Merge branch 'dynamic-bt' of https://github.com/janmulder/subsurfaceGravatar Dirk Hohndel
2017-10-14Documentation: Merge and update french translationsGravatar Guillaume GARDET
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-12mobile: enable switching BT on/off during session.Gravatar Jan Mulder
This commit implements possible switching BT on and off during a session, so not needing a restart of the app when the user forgot to switch it on when starting the app. For this, the following needed to be done: 1) create a handler that reacts on local BT device status changes. 2) repopulate the connection list in the download screen when a BT status change is detected. Notice the subtile change of the Q_INVOKABLE btEnabled() function to a Q_PROPERTY. This gives a nice dynamic behaviour when switching BT on/off with the app open. Fixes: #556 Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-10-12Add function for non-BT connection addressesGravatar Jan Mulder
Simple rewrite of a piece of code separated to its own function so that is can be used in other places as well. To avoid code duplication for dynamic BT on/off switching on mobile. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-10-12Add function to clear connectionModel dataGravatar Jan Mulder
Preparation primarily for mobile. When we want to switch in one session from BT to cable connection and vise versa, we need a way to clear the model data containing the possible connections in use. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-10-11Update bundled versiomn of the Subsurface-mobile manualGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-11Subsurface-mobile user manual: many small adjustmentsGravatar Dirk Hohndel
Tweak some of the explanations, expand a few sections a bit more, overall try to make the user manual even more comprehensive. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-11Subsurface-mobile user manual: spelling correctionsGravatar Dirk Hohndel
Some of these are undeniably typos, others (sorry) are simply en-US updates for consistency. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-11QML UI: pin known good Kirigami versionGravatar Dirk Hohndel
Following master is just not healthy. We need to be more deliberate in which version we built against. An update in the last 24 hours broke Subsurface-mobile again. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-11Another translation updateGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-11Update included version of mobile user manualGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-11Update Subsurface-mobile user manual for v2Gravatar Willem Ferguson
Many updates for the new UI and new features. Completely replaced all the pictures. Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-11iOS build: we don't use ssh and can't use OpenSSLGravatar Dirk Hohndel
On iOS we don't need to enable ssh-based git access - and we can no longer build against OpenSSL (instead use the platform SSL libraries. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-09latest translationsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-09QML UI: add missing iconGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-09Mac build: update the signing scriptGravatar Dirk Hohndel
Which admittedly is mostly useful for me... Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-09Mac build: these problems have long been solvedGravatar Dirk Hohndel
And the Readme is therefore confusing. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-09Use lrint() for all degrees_t related roundingGravatar Lubomir I. Ivanov
In certain places the '(int)' cast is used, while in other the llrint() or lrint() functions. Make the conversation from degrees in the 'double' form to the 'int' degrees_t consistent using lrint(). lrint() is the function which should give the best results, because it accepts a 'double' and results in a 'long' even if degrees_t is 'int'. If the truncation from 'long' to 'int' is discarding some of the precision then the next step would be to turn degrees_t into a 64bit signed integer type. Possible fix for #625. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-10-09Preferences units dialog: Tab order and silence warningsGravatar Stefan Fuchs
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-09Display units in dive list table based on prefs optionGravatar Stefan Fuchs
Add a preferences option which enables or disables display of units in the main dive liste table. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-10-08preferences: add missing dialog iconGravatar Lubomir I. Ivanov
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-28 00:23:05 +0000