summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2017-11-07Save font_size in correct groupGravatar Jan Mulder
A change of the font_size in preferences ended up in the wrong preferences group (the GeneralSettings group), appearing to the user as a non-saved preference. Fix is simple. Just set the the correct group before saving a change in font_size. Fixes: #780 Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-11-06Travis AppImage: hide warning messages about GStreamer pluginsGravatar Dirk Hohndel
We don't use GStreamer and we really should try to build a QtWebKit version without that dependency, but for now this should work to just silence all these annoying warnings. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-06Travis: upload the AppImage.zsync file as wellGravatar Dirk Hohndel
This should allow incremental updates of the AppImage. Unfortunately right now this requires on us not messing with the file names - which means we are losing the SHA embedded there... Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-06BT device selection dialog: make Save the default buttonGravatar Berthold Stoeger
When a user presses enter, they probably want their selection saved, not discarded. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2017-11-06Add "Aladin" to the list of recognized BT names.Gravatar Berthold Stoeger
Recognize Aladin as the Bluetooth name of the Scubapro Aladin Sport Matrix. Note that the Scubapro Aladin H Matrix most likely also identifies itself using this BT name. But it probably uses the same BT protocol (i.e. the G2 protocol) and therefore this should not pose a problem. Ultimately a common name should be found. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2017-11-06Remove unnecessary == NULL test.Gravatar Berthold Stoeger
Test not necessary, because the QString in question is not a pointer and the string is tested for emptiness (which also flags null-strings). Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2017-11-06Only considered annotated/signed tags for versionGravatar Dirk Hohndel
This works around confusion with the 'continuous' tag that we now use for the CI AppImage builds. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-06Update translation source stringsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-06Fix typo which prevented correct translation of word "Density"Gravatar Stefan Fuchs
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-11-06Travis: fix typoGravatar Dirk Hohndel
I hate it when I do that. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-06Travis AppImage: work around OpenSSL issueGravatar Dirk Hohndel
The Qt binaries that we use for the continues build of the AppImage reference libcrypto.so.1.0.1e, but we bundle libcrypto.so.1.0.0. On distros that have libcrypto.so.1.0.1e that gets loaded in addition to the one that we bundle which causes a conflict. More details are explained in the issue below. Fixes #779 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-06Update ReleaseNotesGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-05Travis: upload continuous build AppImages as wellGravatar Dirk Hohndel
The latest is always under tag 'continuous'. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-05Travis: automatically create AppImage for releasesGravatar Dirk Hohndel
This uploads the AppImage as Release whenever there's a new tag. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-05Travis: add Grantlee pluginsGravatar Dirk Hohndel
With this we appear to have a fully functional AppImage. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-05Travis: find the Qt plugins when running testsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-05Travis: get our own Qt and build with WebKit enabledGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-05build.sh: fix typo that caused us to build Grantlee testsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-05Travis: remove special handling for MapWidgetGravatar Dirk Hohndel
Thanks to commit 956b45ddfd ("map-widget: move the widget and its resources to 'map-widget'") this is no longer needed. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-05Fix name to uppercaseGravatar probonopd
2017-11-05Build AppImage on Travis CIGravatar probonopd
https://github.com/Subsurface-divelog/subsurface/issues/769
2017-11-05map-widget: move the widget and its resources to 'map-widget'Gravatar Lubomir I. Ivanov
Move all the map widget platform agnostic files to the <subsurface-root>/map-widget folder. This avoids the confusion about the desktop version of subsurface using mobile components. The map widget is planned as a shared component between the mobile and desktop versions. desktop-widgets/mapwidget[.h/.cpp] still remain as those are specific to the desktop version. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-11-05build.sh: add option to create appdirGravatar Dirk Hohndel
This makes it easier to create an AppImage from the build artifacts. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-05build.sh: always install SubsurfaceGravatar Dirk Hohndel
We had not done this on Linux as it was just as easy to run from the build environment, but we need to install in order to be able to create an AppImage on Travis. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-11-04Rename README to README.md in some scripts, makefiles,...Gravatar Stefan Fuchs
Was needed after the file itself was renamed. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-11-04Replace itemClicked() by currentItemChanged() in Bt device selectionGravatar Berthold Stoeger
This fixes two problems: 1) Using the keybord or clicking below the list and moving the mouse up while holding the mouse button did not properly update the status message and the save button. For example, one could save with a non- paired device selected. 2) The code assumed that a device is selected if the save button is active, but the save button was not disabled on scan. Thus, one could provoke a crash by selecting an item, scanning and then pressing save. This problem is fixed indirectly, because the save button is now always disabled if the selection is cleared. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2017-11-04Format commit message as code blockGravatar probonopd
2017-11-04Convert README to markdown and add Travis CI build status, closes #765Gravatar probonopd
2017-11-04Disable o2 break option if last stop is not at 6m/20ftGravatar Stefan Fuchs
Disable the possibility to plan o2 breaks of option "last stop at 6m/20ft" is not set. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-11-04O2 breaks code enhancements and cleanupGravatar Stefan Fuchs
Remove unused variables o2time and breaktime or convert into boolean. Never consider minimum gas switch time when switching to o2. Reflect this behavior also in the UI. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-11-04Planner UI: Move dive mode UI element to the top of the column...Gravatar Stefan Fuchs
and add a label for it. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-11-04In planner for different deco modes enable/disable options correctlyGravatar Stefan Fuchs
Disable option "safety stop" for all deco modes other than "recreational". Disable also labels "reserve gas", "GF ..." and "VPM conservatism" correctly. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-11-04Correct, cleanup, translate and unify file filtersGravatar Stefan Fuchs
Correct spelling and typos in file filters. Unify and translate file filter names. Don't pass a file filter to a directory open dialog - not needed. Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-11-04Replace QMap::operator[] with QMap::value()Gravatar Berthold Stoeger
QMap::operator[] creates a new default constructed entry in the map if no entry with the given key exists. While not problematic (since typically nullptrs are inserted) this is usually not what you want for read access. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2017-11-04Fix user-manual syntax to work with a2xGravatar Miika Turkia
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-11-04Planner copy salinity only if current dive existsGravatar Stefan Fuchs
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-11-03documentation: remove the --win32* argumentsGravatar Lubomir I. Ivanov
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-11-03win32: optimize the console and logging logicGravatar Lubomir I. Ivanov
Currently one has to explicitly use --win32console and/or --win32log to enable a dedicated console (a console window that opens next to the Subsurface window) or to enable file logging on Win32. This patch makes the following changes: - removes the --win32* command line arguments - removes the dedicated console window support - if the app starts from a shortcut and not from a console, always redirect stderr and stdout to _err & _out log files - if the app starts from a console redirect stderr and stdout to that console Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-11-02desktop-main.cpp: round the fractional part of the GL versionGravatar Lubomir I. Ivanov
When verMinor is extracted with the glGetString() method, use roundf() to round the GL MINOR version to an integer. 2.1 is split in 2 and 1. Without this patch rounding issues are present as for 32bit IEEE the default rounding makes (0.1f * 10.f) into 0.999999f. Given the MINOR is a single digit for GL, calling roundf() on 0.999999 gives the expected result 1 for the MINOR. Reported-by: Murillo Fernandes Bernardes <notifications@github.com> Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-11-02Fix resource leaks in qt-ble.cppGravatar Berthold Stoeger
1) Destroy QLowEnergyService objects in destructor of BLEObject. 2) Let BLE object take ownership of the controller so that the latter can be destroyed in the destructor of the former. This introduces a certain ownership subtlety, which could be solved by allocating the controller object in the BLE object. But let's first do the less intrusive thing. 3) Destroy the BLE object for two error conditions. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2017-11-01Reset device field in DownloadFromDCWidget according to dive computerGravatar Berthold Stoeger
Fixes minor interface inconsistency: The device field in the download-from-dive-computer widget is disabled when selecting a non-serial-transport dive computer. In contrast, post-download the field was reset to enabled for all dive computers. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2017-11-01desktop-main.cpp: further improve the GL version detectionGravatar Lubomir I. Ivanov
First, attempt to use glGetString(GL_VERSION), which works on legacy profiles but has to be parsed (unsafe and vendor specific?). If the above fails attempt to use the newer version API from glGetIntegerv(). If both fail, fall back to a software renderer or exit. If GLES is detected from glGetString() (for some odd reason - e.g. emulated driver) show a warning and return early as we don't handle it's versioning. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-10-31Getting ready for 4.7.2v4.7.2Gravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-31Latest translationsGravatar Dirk Hohndel
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-10-31When O2 breaking, add segment with current mix not with nextGravatar Robert C. Helling
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-10-31Don't do the minimal gaschanging stops during O2 breaktingGravatar Robert C. Helling
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-10-31Correct time bookkeeping when doing O2 breaksGravatar Robert C. Helling
These got mangled with previous changes to stop length determination. Fixes #662 Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-10-31Postpone error message display if not in GUI threadGravatar Berthold Stoeger
Calls to report_error() crashed if not called from GUI thread. Fix this by postponing error message display if not in GUI thread. Code that creates a thread which possibly calls report_error() is responsible for calling MainWindow::showErrors() to flush the accumulated messages. Note that there is a race condition in report_error() and get_error_string(). Nevertheless, hitting it should be rather unlikely (two threads producing error messages at the same time) and hopefully it can be fixed rather easily. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2017-10-30desktop-main.cpp: don't validate for custom backendsGravatar Lubomir I. Ivanov
Without this patch the user can pass a custom backend like 'software' and the validation will still be performed. In a case where the validation fails Subsurface will still exit. With this patch the validation is performed *only* for the standard backend which is OpenGL (or an empty QT_QUICK_BACKEND) env. variable. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-10-30VPM-B ceiling: calculate deco_time similar to planned VPM-B divesGravatar Rick Walsh
When planning a VPM-B dive, the "deco time" ends at surfacing, which is after ascending after a full-minute deco stop is complete, after ceiling clears. We should take this into account when calculating the ceiling outside of the planner. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2025-01-03 23:00:15 +0000