| Age | Commit message (Collapse) | Author |
|---|
|
When we change the filter string, we need to make sure that the collapsed model is
also aware of the change.
Similarly, instead of just calling resetFilter and directly changing the core
data structures, we need to set the filter to the empty string which ensures
that all three models get notified and the view updates correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This caused a blank, unusable dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The number of different ways we tried to refer to the model made my head spin.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This shouldn't be necessary every time we replace the sort model,
but it can't hurt, either (famous last words?).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This one significantly reduces the number of dives that are handed to the
ListView in QML. For every trip that isn't expanded (only zero or one trips are
expanded at any time, so almost all the others are collapsed), send only first
dive to the View to allow creation of the section. Hide the rest so we don't
have all these invisible, zero height entries for the vertical dive list.
A big part of this commit is moving a few functions from the DiveListSortModel
to the CollapsedDiveListSortModel. Those are the ones that are needed for the
trip header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The previous code assumes that both the vertical dive list and the list of dive
details which allows the horizontal swiping from dive to dive are based on the
same model.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Memory is cheap these days. Still, this was wasteful. On a 64 bit machine we
went from 1620 to 1592 bytes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This is only used in Subsurface-mobile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Allow showing that the app is busy and showing why at the same time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When called without arguments, no message is shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Running Subsurface-mobile on iOS, the notification texts are sometimes very
hard to read, and in some situations the busy indicator isn't showing up at
all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes it much more consistent and avoids a silly warning.
Also some small README updates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
While the error that caused this to happen should be fixed, we should at least
let the user know if things failed catastrophically and we can't figure out how
to save their data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If there is a local cache, we at least once successfully accessed the cloud, so
this is a valid cloud based git tree.
Without this change we run into a subtle bug: after a fresh install, or when
switching users, when the cloud data is accessed the very first time, we don't
remember that this was indeed loaded from the cloud. So if we then download
from a dive computer or make any other changes to the dive log, we cannot save
those dives to cloud storage - but we fail silently doing so. Which to the user
would look that inexplicable data loss.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This code really made no sense, adding a comment to try to explain that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Clearly a cut and paste error. Only creates a harmless warning, still...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The NOTICE and copyright are freeform. The new description key is required for
iOS 13, but of course the redundant old key is still required for older
builds...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When trying to debug on device Xcode really wants a debug build (which is
nearly unusably slow, but that's a different issue).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Those aren't allowed on iOS and adding these two flags removes some confusing
warnings that look like errors in the build log.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This was updated by Xcode - just checking it in so that running Xcode doesn't
cause dirty source tree.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The ProfileWidget2::recalcCeiling() function is used in one place,
namely when an undo-command changes the mode. It recalculates
decompression data and repaints the ceilings and thus avoids a
full profile-redraw.
This is smart, but it becomes problematic when the dive is changed
and the ceiling is recalculated before the profile is redrawn.
The DivePlotDataModel then still has data from the previous dive
but cylinders of the new dive are accessed.
This kind of situation may arise if multiple dive fields are
updated, as for example when replanning a dive.
Currently, this only causes a temporary mis-calculation. When
removing MAX_CYLINDERS this will lead to crashes.
One might attempt to fix the whole data-dependency mess. This
commit goes the cheap route and simply redraws the profile when
the mode is changed. Yes, it is in a way ineffective, but we
do worse things. The ProfileWidget2::recalcCeiling() thus becomes
unused and is removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
When displaying segment or stop times in the planner notes, we always
round to the next full minute. This can mean for example that we
round down more often than rounding up with the result that the sum
of the segment times does not match the total runtime and can for example
lead to stops that are shown with 0min duration.
With this patch, we increase the reference time of the last display only
by the duration time actually shown. This way, the rounding errors don't
accumulate but having rounded down previously makes rounding up the next
time more propable.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
This avoids a bunch of annoying warnings.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
If the dive list is connected to the model while the model is updated
with the downloaded dives, sometimes the UI hangs completely.
Disconnecting the model and then reconnecting it does add a fairly
noticeable delay on longer dive lists, so there are tradeoffs here.
Of course the obvious solution is to make reconnecting the model
faster...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This helps tremendously when tracking down some problems. We should
never use console.log.
In the process this also updates a couple of the messages to be clearer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When computing the best mix for a target depth, for helium, one
can either require that the partial pressure of N2 is the same
as at the target depth or the partial pressure of N2 plus O2.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
That seems slightly more visually pleasing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This makes it hard to fat finger the side buttons.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We should call this function with two well defined dive_or_trip structures
which means that exactly one of the two values is set in each argument. But
in order to not have bugs elsewhere leed to crashes here, be more tolerant
of malformed argumnts.
Fixes CID 350100
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We test for d being NULL so that's clearly an option we worried about, yet
we already called get_dive_site_for_dive(d) which dereferences d.
Found by Coverity. Fixes CID 350118
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should never happen based on the logic in the callers, but just
to be on the safe side.
Should fix CID 350128
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
We have these helper functions for exactly this purpose.
Found by Coverity. Fixes CID 350129
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
When clicking "done" on the dive site edit screen, the diveSite
member variable was reset to nullptr in acceptChanges() at the
beginning of the function. This prevented posting an undo-command
as a consequence of the active widget losing focus.
Reset the diveSite variable after exiting dive-site mode, which
causes the active widget to lose focus.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The native buffer of a membuffer is not NUL-terminated, so when you want
to detach it and use it as a C string, you had to first do
'mb_cstring()' that adds the proper termination/
This was all documented in the header files, and all but two users did
it correctly.
But there were those two users, and the exported interface was
unnecessarily hard to use. We do want the "just detach the raw buffer"
internally in the membuffer code, but let's not make the exported
interface be that hard to use.
So this switches the exported interface to be 'detach_cstring()', which
does that 'mb_cstring()' for you, and avoids the possibility that you'd
use a non-terminated memory buffer as a C string.
The old 'detach_buffer()' is now purely the internal membuffer
implementation, and not used by others.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I don't recall when this stopped working.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
TankItem had a "height" member variable that was never modified.
Turn it into a constant, which is local to the translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The whole plot info data was copied only so that the time of the
last item could be determined later. Instead, simply store the
timestamp.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Calculation of the x-position and the width of the tank-bar
was done outside of the function. Move it into the function
to make the caller a bit more readable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This is only used for an "is initialized"-check. But there are
other member variables that are used for that purpose. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
I we have no dive, whatever this is shouldn't be shown.
Found by Coverity. Fixes CID 350093
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Found by Coverity. CID 350081, 350087, 350095
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The current code of course works just fine. But there's a risk someone might
add something to one of these cases and not realize that there is an implicit
fall through going on. This is cleaner.
Found by Coverity. Fixes CID 350079
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This should never matter as we should never call undoit before redoit.
Extra ensurance that we don't access random data.
Found by Coverity. Fixes CID 350076
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This simply returns the address of prefs.units.
Found by Coverity. Fixes CID 60237
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This seems excessively unlikely to actually fail. SEEK_END works, but SEEK_SET
fails? Oh well. Belts and suspenders.
Found by Coverity. Fixes CID 45039
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This one is a bit complicated as it depends on a specific flow, but it
seems like setup_cvs_parms might indeed write NULL to the element at
index 49 of parm. I'm not 100% sure that the sequence of events required
for this can happen, but adding one more pointer to the array seems like
cheap insurance.
Found by Coverity. Fixes CID 350120
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
This prevents a resource leak.
Found by Coverity. Fixes CID 350080
The commit also includes some tiny whitespace/empty line fixes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Berthold Stoeger
Robert C. Helling
Linus Torvalds