| Age | Commit message (Collapse) | Author |
|---|
|
Somehow a whitespace fix snuck in here. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
And make sure we don't create a dive site for an empty location string.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
See issue #949. In the dive list, dates are shown in short format, and
when we start to edit an existing dive, the date field on the edit
page is shown in sort format. However, when adding a new dive, the
initial date shows up in long (normal) format. This in not only
inconsistent, but also introduces the parsing problem, as described
in the mentioned issue.
This can be fixed by using short formatted dates in all cases in
the mobile app. As the screen real estate is precious on mobile,
this seems the most logical choice.
Fixed: #949
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Internal floating point (FP) calculations should be performed using double
unless there is a very good reason. This avoids headaches with conversions.
Indeed, the vast majority of FP calculations were already done using double.
This patch adapts most remaining calculations. Not converted where things
that were based on binary representations and variables which weren't used
anyway.
An analysis of all instances follows:
core/plannernotes.c, l.404:
This was a comparison between two floats. On the left side, first an integer
was cast to float then multiplied with and integer and divided by a constant
double. The right hand side was an integer cast to a float. Simply divide by
1000.0 first to convert to double and continue with calculations. On the right
hand side, remove the cast, because the integer will be implicitely cast to
double for comparison. This conversion actually emits less instructions,
because no conversion to double and back is performed.
core/planner.c, l.613:
Same analysis as previous case.
subsurface-desktop-main.cpp, l.155:
A local variable representing the version OpenGL version. Turn this into
integer logic. Not only does this avoid dreaded FP rounding issues, it also
works correctly for minor version > 10 (not that such a thing is to be
expected anytime soon).
abstractpreferenceswidget.[h/cpp]:
A widget where the position is described as a float. Turn into double.
desktop-widgets/divelogexportdialog.cpp, l.313:
total_weight is described as float. Use double arithmetics instead. This
instance fixes a truncation warning emitted by gcc.
|
|
This commit fixes a very subtle bug. Probably there for ages,
but never noticed. When manually adding a dive, and canceling
the add right away, the divetable was extended by 1 dive (using
the core function add_single_dive), but canceling never removed
that dive (using delete_single_dive). This is corrected here.
Notice that commit ef543da5aff296e claims to fix issue #950.
With this commit, however, that issue can be seen sometimes
again.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Correct way of using indices for rowDDstart and rowDDend.
Reset rowDDstart and rowDDend at beginning of updating dive pictures.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
When editing (or adding) a dive, the internal data containing the
attributes on the edit page was not cleared when editing was
finished (in any way, by saving the edit or by cancelling it).
As long as the user only edits existing dives, all this poses
no problem, as at the start of a dive edit, the data is filled
from the dive to be edited. However, when adding a dive, data
coming from previous edits shows up. This not clearing data
also causes the strange effect as written in issue #950: adding
a dive, deleting it, and adding a dive again, added the first
added dive data, without the edit screen being shown.
All this can be solved by clearing the data from the edit when
editing is done.
Fixes: #950
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
I think that every published issue that is fixed should be in
the changelog.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
See issue #875. In hindsight the reason for this bug is easy to
understand. When updating a dive, the dive was first removed
from the model, and added in its new state again. This does seems
resonable, but the delete in the model causes the internal (QML)
state to be changed, and the previous state (like the currentIndex
that was pointing to the just deleted row, so that one is changed to
something valid internally) is not restored at recreation of
the edited dive. The QML engine has no way to understand that
the remove and subsequent add are in fact one atomic operation.
This can be solved by simply updating the underlying data in
place, and notifying the change using a dataChanged emitted
signal. The dataChanged signal takes care of the repaint of
the screen, and there is no need for removeRow/insertRow pairs.
Fixes: #875
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Trivial fix. Show the message "Turning off automatic
sync to cloud ..." when turning automatic sync to offline. Just
a more logical moment to show this message. Also rephrase the
message "Enable auto sync" to "Auto sync enabled". It shows
a status, and not an action.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Instead use the application-wide instance. Creating a local
object defeats the whole purpose of these objects - nobody
can receive signals in case the settings changed.
No other cases of locally created SettingsObjectWrapper
objects were found.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The function isCloudUrl() was only called in one place, parse_file().
But, isCloudUrl() could only return true if the filename was of the
git-repository kind (url[branch]). In such a case, control flow would
never reach the point where isCloudUrl() is called, since
is_git_repository() returns non-NULL and the function returns early.
Therefore, remove this function. Moreover, adapt the affected if-statement
by replacing "str && !strcmp(str, ...)" with the more concise
"same_string(str, ...)".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Set download srceen in a sane state after a previous download
session using this screen. The erroneous behavior was very
similar to the one fixed in commit 7fe9bbe295dcf92. For example,
download some dives, quit the screen, go back, and the bottom
buttons are still selectable.
This commit resets some values when leaving the download screen
(ie. not only swiping it away), so that it looks sane at a next
visit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Reset the Retry button on exit of the Download from divecomputer
page. So, it it not reset wehen swiping this page away, or
cancelling a running download, but resetting it on accepting
downloaded dives.
As we do not have real error reporting (from download failures),
this all is a little arbitrary. Another "fix" could be, not
changing the button text at all.
Further notice, this is not specific iOS, but also Android.
Fixes: #895
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Start a new column a little bit earlier otherwise it will get difficult
to fit a high number of pictures.
Don't put more than ~16 pictures in one column.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
In the dive picture tab show pictures of all selected dive.
But at the same moment take care that in the profile only
pictures from displayed_dive are displayed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
|
|
See 2182167b533b4c. Keep the dupicated code in sync.
Originally-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
See commit 6f42ab46da1b5956. Unfortunately, this code is duplicated
(and an obvious candidate for code cleanup). So replicate the mentioned
commit here. In fact, the mentioned issue #666 talkes about the mobile
app, and the fix was only done for the desktop.
Originally-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This fixes an annoying bug. When entering an existing divesite
in the mobile app, always a new divesite (with same name) was
created, resulting in multiple sites on the same gps location.
So, be more carefull in checking and creating a new site.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
In libdivecomputer, a new divemode is added (DC_DIVEMODE_SCR) useful
for dive computers that have specfic functionality for semi-closed
rebreathers. At this moment, only the HW computers seem to provide
this.
This commit takes care of proper recognition of this new divemode
when importing data from a dive computer.
Tested on an actual import from an OSTC3 that contained
dives in this new mode.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This is just code cleanup. Jef renamed the CCR divemode constant
in libdivecomputer, but added a define to be backward compatible as
as well (so this rename did not break our Subsurface build).
Obviously, this breaks the build for people that build against an older
libdivecomputer, but I see no reason to do that.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
|
|
This gets us the first merge with the upstream iostream implementation.
This requires a small change for serial_ftdi.c to build.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The MainWindow::setTitle() function was passed an enum, which depended
on whether existing_file is set or not. The check can be (and was!) done
directly in setTitle(). Therefore, remove the whole enum.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
This was an artifact of commit 136110784ebe2a188ca867bea3a7ff3037281a57
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Before, we did not look at the path of the filename to export
to but we should write the images there and not in pwd.
Fixes #931
Signed-off-by: Robert C. Helling <helling@atdotde.de>
|
|
copy_string() does the same as the current code, but in one instead
of four lines. Strictly speaking, it does not exactly the same thing
because the empty string ("") case is handled differently. copy_string()
returns NULL instead of a copy of "", which is probably preferred anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The last force=false case was removed in commit 96d1cc570e31396039e4970d2bf75d5f00f1e550.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Current values (1000m, 10 min) may be too long to choose an accurate fix
while automatically applying gpsfixes to dives. They are fine if we are
diving from a static position, but will give wrong positions e.g. while
drift diving.
Reducing the default values to shorter 100m, 5min won't hurt most dives
from shore or static boats, but will make other diving styles get more
accurate gpsfixes.
signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Title is self explanatory.
[Dirk Hohndel: small edits to remove typo / improve readability]
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
ATM we were giving preference to a gps fix taken during dive time over
another taken before dive start time (proven both in predefined
SAME_GROUP 6 hours range).
While this logic is right for a static boat or a shore dive - as it
ensures a correct position - will fail for drift dives or dives where
boat changes its position during dive time.
Instead, will choose the gps fix closer to the dive start time.
fixes issue #666
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
The removed comment in qt-models/divepicturemodel.h described
todo items which were already implemented.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The thumbnailing in qt-models/divepicturemodel.cpp was performed
concurrently, but the thumbnailCache was not protected from races.
Resolve this by guarding the thumbnalCache accesses with mutexes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
The code of DivePictureModel used a QHash to keep track of thumbnails.
Not only was the code rather complex - it also had the consequence that
pictures are sorted according to the hash function, i.e. seemingly
random.
This commit replaces the QHash by a simple QList which keeps track
of thumbnails and some meta-data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Note that constructs like QList<QFuture<void>> is incompatible with
pre-C++11 compilers. But the code base is so full of C++11isms that
we may just as well remove asymmetric eye-sores of the kind
"QList<QFuture<void> >".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
This will grab the divemode information from the first waypoint within
the dive that includes this info and uses it for dctype.
Note that our dive type is not as fine grained as the one in UDDF. The
latter allows one to switch divemode during the dive when we do not.
However, one could argue that i.e. a rebreather dive should be a
rebreather dive even if one switches to bailout gas at some point...
Fixes #922
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
|
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
|
Dirk Hohndel
Jan Mulder
Berthold Stoeger
Stefan Fuchs
Miika Turkia
Robert C. Helling
Salvador Cuñat